summaryrefslogtreecommitdiff
path: root/doc/sane-sm3840.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:19 +0100
committerJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:19 +0100
commit351b7328520c16730ceb46e5acae16038c42185e (patch)
treefae21fd5c94f3c3ed0202a95c9ada705482e647b /doc/sane-sm3840.man
parentad38bc6ecb80ddeb562841b33258dd53659b1da6 (diff)
New upstream version 1.0.32upstream/1.0.32
Diffstat (limited to 'doc/sane-sm3840.man')
-rw-r--r--doc/sane-sm3840.man48
1 files changed, 30 insertions, 18 deletions
diff --git a/doc/sane-sm3840.man b/doc/sane-sm3840.man
index e6af3a1..58f07b0 100644
--- a/doc/sane-sm3840.man
+++ b/doc/sane-sm3840.man
@@ -10,10 +10,15 @@ provides access to some Microtek scanners with the SCAN08
USB chip.
.PP
There exist backends for Microtek scanners with SCSI command set.
-Refer to sane\-microtek(5) and sane\-microtek2(5) for details.
+Refer to
+.BR sane\-microtek (5)
+and
+.BR sane\-microtek2 (5)
+for details.
.PP
-There also exists a Microtek 3600 series driver, see sane\-sm3600(5) for
-details.
+There also exists a Microtek 3600 series driver, see
+.BR sane\-sm3600 (5)
+for details.
.PP
At present, the following
scanners are known positively to work with this backend:
@@ -31,36 +36,38 @@ Microtek ScanMaker 4800 All modes OK
.PP
If you own a Microtek scanner with the SCAN08 chip other than the ones
listed above, it may or may not work with SANE. Feel free to contact the
-backend author (earle@ziplabel.com) to report results with scanners not
-on the list.
+backend author
+.RI ( earle@ziplabel.com )
+to report results with scanners not on the list.
.SH "FRONTEND OPTIONS"
.PP
-The following options are supported by the sm3840-driver:
-.PP
+The following options are supported by the
+.BR sane\-sm3840
+driver:
+.TP
.B \-\-mode color|gray|lineart|halftone
-.br
Color or grayscale mode.
+.TP
.B \-\-resolution 150|300|600|1200
-.br
Pixels per inch for scans.
+.TP
.B \-\-depth 8|16
-.br
Note that the least significant bits of 16bpp mode may be noise.
+.TP
.B \-\-brightness 1..4096
-.br
Higher numbers increase brightness of returned image.
+.TP
.B \-\-contrast 0.1..9.9
-.br
Larger numbers decrease contrast of returned image.
+.TP
.B \-\-lamp\-timeout 1..15
-.br
Time in minutes until the lamp is turned off after a scan.
.SH CONFIGURATION
@@ -83,12 +90,17 @@ If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller
levels reduce verbosity. To see error messages on stderr set
-SANE_DEBUG_SM3840 to 1.
+.B SANE_DEBUG_SM3840
+to 1.
.SH "SEE ALSO"
-sane\-microtek2(5), sane\-sm3600(5), http://www.ziplabel.com/sm3840
+.BR sane (7),
+.BR sane\-microtek (5),
+.BR sane\-microtek2 (5),
+.BR sane\-sm3600 (5)
+.br
+.I http://www.ziplabel.com/sm3840
.SH AUTHOR
-.br
-Earle F. Philhower III (earle@ziplabel.com)
-.br
+Earle F. Philhower III
+.RI < earle@ziplabel.com >