Initial import of sane-backends version 1.0.24-1.2

1 files changed, 85 insertions, 0 deletions

diff --git a/doc/sane-xerox_mfp.man b/doc/sane-xerox_mfp.man
new file mode 100644
index 0000000..0f896ce
--- /dev/null
+++ b/doc/sane-xerox_mfp.man
@@ -0,0 +1,85 @@
+.TH sane\-xerox_mfp 5 "15 Dec 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.IX sane\-xerox_mfp
+.SH NAME
+sane\-xerox_mfp \- SANE backend for Xerox Phaser 3200MFP device
+.SH DESCRIPTION
+The
+.B sane\-xerox_mfp
+library implements a SANE (Scanner Access Now Easy) backend that provides
+access to the following USB and network multifunction-peripheral:
+.PP
+.RS
+Phaser 3200MFP
+.br
+Dell MFP Laser Printer 1815dn
+.br
+Xerox Phaser 6110MFP
+.br
+Samsung CLX-3170fn & CLX-3175FW
+.br
+Samsung SCX-4200
+.br
+Samsung SCX-4300
+.br
+Samsung SCX-4500
+.br
+Samsung SCX-4500W
+.br
+Samsung SCX4725-FN
+.br
+Xerox WorkCentre 3119 Series
+.RE
+.PP
+If you own a scanner other than the ones listed above that works with this
+backend, please let us know this by sending the scanner's exact model name and
+the USB vendor and device ids (e.g. from
+.IR /proc/bus/usb/devices ,
+.I sane\-find\-scanner
+or syslog) to us. Even if the scanner's name is only slightly different from
+the models mentioned above, please let us know.
+.SH CONFIGURATION
+.I @CONFIGDIR@/xerox_mfp.conf
+USB scanners do not need any configuration.
+
+For SCX-4500W in network mode you need to specify
+.PP
+.RS
+.B tcp host_address [port]
+.RE
+.PP
+The 
+.B host_address
+is passed through resolver, thus can be a dotted quad or a name from /etc/hosts or resolvable through DNS.
+.SH FILES
+.TP
+.I @CONFIGDIR@/xerox_mfp.conf
+The backend configuration file. By default all scanner types/models are enabled, you
+may want to comment out unwanted.
+.TP
+.I @LIBDIR@/libsane\-xerox_mfp.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-xerox_mfp.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+.SH ENVIRONMENT
+.B SANE_DEBUG_XEROX_MFP
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend.  Higher
+debug levels increase the verbosity of the output. 
+
+Example: 
+export SANE_DEBUG_XEROX_MFP=4
+.SH AUTHOR
+Alex Belkin <abc@telekom.ru>
+
+Samsung SCX-4500W scan over network support
+Alexander Kuznetsov <acca(at)cpan.org>
+.SH BUGS:
+Multicast autoconfiguration for LAN scanners is not implemented yet. IPv6 addressing never been tested.
+
+.SH "SEE ALSO"
+.BR sane (7),
+.BR sane\-usb (5)
+.br
+