summaryrefslogtreecommitdiff
path: root/doc/saned.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2015-10-08 12:32:49 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2015-10-08 12:32:49 +0200
commitcfd27ef2ad8b005fd47ab41ef29b71d9e3d48201 (patch)
tree56cb8849a5df91b19b72fd4f48c79c343cd9bc5e /doc/saned.man
parentba8d09abe681600aad991f4a75e904615b7ed29f (diff)
Imported Upstream version 1.0.25upstream/1.0.25
Diffstat (limited to 'doc/saned.man')
-rw-r--r--doc/saned.man98
1 files changed, 88 insertions, 10 deletions
diff --git a/doc/saned.man b/doc/saned.man
index d8e8983..5f7bc20 100644
--- a/doc/saned.man
+++ b/doc/saned.man
@@ -164,7 +164,7 @@ The configuration line normally looks like this:
.PP
.RS
sane\-port stream tcp nowait saned.saned @SBINDIR@/saned saned
-.E
+.RE
.PP
However, if your system uses
.BR tcpd (8)
@@ -214,7 +214,19 @@ service sane\-port
.ft R
.RE
.SH SYSTEMD CONFIGURATION
-for systemd we need to add 2 configuation files in
+Saned can be compiled with explicit systemd support. This
+will allow logging debugging information to be forwarded
+to the systemd journal. The systemd support
+requires compilation with the systemd-devel package
+installed on the system. this is the preferred option.
+
+Saned can be used wih systemd without the systemd integration
+compiled in, but then logging of debug information is not supported.
+
+The systemd configuration is different for the 2 options, so
+both are described below.
+.SH Systemd configuration for saned with systemd support compiled in
+for the systemd configuration we need to add 2 configuation files in
.I /etc/systemd/system.
.PP
The first file we need to add here is called
@@ -257,23 +269,89 @@ Group=saned
StandardInput=null
StandardOutput=syslog
StandardError=syslog
-# Environment=SANE_CONFIG_DIR=@CONFIGDIR@ SANE_DEBUG_DLL=255
+Environment=SANE_CONFIG_DIR=@CONFIGDIR@
+# If you need to debug your configuration uncomment the next line and
+# change it as appropriate to set the desired debug options
+# Environment=SANE_DEBUG_DLL=255 SANE_DEBUG_BJNP=5
+
+[Install]
+Also=saned.socket
.fi
.ft R
.RE
.PP
-Is you need to set an environment variable for saned like
+You need to set an environment variable for
.B SANE_CONFIG_DIR
-you will have to remove the # on the last line and set the variable
-appropriately. Multiple variables can be set by separating the assignments
-by spaces as shown in the example above.
+pointing to the directory where saned can find its configuration files.
+you will have to remove the # on the last line and set the variables
+for the desired debugging information if required. Multiple variables
+can be set by separating the assignments by spaces as shown in the
+example above.
.PP
Unlike
.I (x)inetd
-systemd allows debugging output from backends set using
-.B SANE_DEBUG_<backend_name>
-to be captured. With the service unit as described above, the debugging output is
+, systemd allows debugging output from backends set using
+.B SANE_DEBUG_XXX
+to be captured. See the man-page for your backend to see what options
+are supported.
+With the service unit as described above, the debugging output is
forwarded to the system log.
+
+.SH Systemd configuration when saned is compiled without systemd support
+This configuration will also work when Saned is compiled WITH systemd integration
+support, but it does not allow debugging information to be logged.
+.PP
+for systemd configuration for saned, we need to add 2 configuation files in
+.I /etc/systemd/system.
+.PP
+The first file we need to add here is called
+.I saned.socket.
+It is identical to the version for systemd with the support compiled in.
+It shall have the following contents:
+.PP
+.RS
+.ft CR
+.nf
+[Unit]
+Description=saned incoming socket
+
+[Socket]
+ListenStream=6566
+Accept=yes
+MaxConnections=1
+
+[Install]
+WantedBy=sockets.target
+.fi
+.ft R
+.RE
+.PP
+The second file to be added is
+.I saned@.service
+This one differes from the sersion with systemd integration compiled in:
+.PP
+.RS
+.ft CR
+.nf
+[Unit]
+Description=Scanner Service
+Requires=saned.socket
+
+[Service]
+ExecStart=/usr/sbin/saned
+User=saned
+Group=saned
+StandardInput=socket
+
+Environment=SANE_CONFIG_DIR=/etc/sane.d
+
+[Install]
+Also=saned.socket
+.fi
+.ft R
+.RE
+.PP
+
.SH FILES
.TP
.I /etc/hosts.equiv