summaryrefslogtreecommitdiff
path: root/doc/umax/umax.CHANGES
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
committerJörg Frings-Fürst <debian@jff-webhosting.net>2021-02-16 18:24:46 +0100
commitecaaf250cb33ff61f37a7b441f2337584a655350 (patch)
tree4303648095deff998ae20c2393b56db527742ac9 /doc/umax/umax.CHANGES
parent5793a221e112fa49073de0137d6bfa750a61b0a1 (diff)
parent351b7328520c16730ceb46e5acae16038c42185e (diff)
Update upstream source from tag 'upstream/1.0.32'
Update to upstream version '1.0.32' with Debian dir 2c1111c59d9d68bcbf479a4a4de7697fe2de127f
Diffstat (limited to 'doc/umax/umax.CHANGES')
-rw-r--r--doc/umax/umax.CHANGES38
1 files changed, 19 insertions, 19 deletions
diff --git a/doc/umax/umax.CHANGES b/doc/umax/umax.CHANGES
index 79cca89..fae53a4 100644
--- a/doc/umax/umax.CHANGES
+++ b/doc/umax/umax.CHANGES
@@ -5,9 +5,9 @@ umax -> sane-0.6:
-----------------
* umax-sane-backend created:
- - umax.c splitted in:
+ - umax.c split in:
umax-cli.c, umax-scsi.c, umax-driver.c, umax-text.c
- - umax.h splitted in:
+ - umax.h split in:
umax-scanner.h, umax-scsi.h, umax-scsidef.h, umax-struct.h
- outputs done by DBG(level,msg,args...) defined in debug.h
- scsi-calls changed to sane-format (of sane-0.57)
@@ -91,7 +91,7 @@ sane-0.6 / 0.61 / 0.62 -> 0.63
* reset adf and uta flag when not used (in sane_start)
- * added possibilty to change calibration-mode if available
+ * added possibility to change calibration-mode if available
* added send_halftone_pattern to umax-scsi.c
@@ -119,7 +119,7 @@ sane-0.6 / 0.61 / 0.62 -> 0.63
and added missing 3 wid-bytes in scan.cmd
* removed parameter color in three_pass_function_headers,
- the color ist taken from us->three_pass_color now.
+ the color is taken from us->three_pass_color now.
sane-0.63/0.64/0.65 -> 0.66
@@ -189,7 +189,7 @@ sane-0.66 -> 0.67
* removed bug (wrong length for 10 bit-gamma) in send_gamma_data
- * changed all buffer-definitions to unsigned char and insterted
+ * changed all buffer-definitions to unsigned char and inserted
type conversions, so there are no more warnings because of
typemismatches.
@@ -201,7 +201,7 @@ sane-0.67 -> 0.68
* changed open config to fp = sanei_config_open(UMAX_CONFIG_FILE)
- * changed all set OPT...BIND commands, endless-loop happend in sane-0.67
+ * changed all set OPT...BIND commands, endless-loop happened in sane-0.67
=>ane-0.67-umax-fix.diff.gz
after that patch changed same for ten_bit_mode
@@ -232,7 +232,7 @@ sane-0.68 -> 0.69
* changed name: umax_read_data_block -> umax_read_image_data
- * changed length offest in do_inquiry from 5 to 4
+ * changed length offset in do_inquiry from 5 to 4
and changed set_inquiry_length-offset from 5 to 4
* added calib_lines to structure US and added it to
@@ -278,7 +278,7 @@ sane-0.69 -> 0.70
* moved reader_process from umax.c to umax-scsi.c
and added routine for color ordering.
- * reset length offest in do_inquiry from 4 to 5
+ * reset length offset in do_inquiry from 4 to 5
and set_inquiry_length-offset from 4 to 5
because umax-S6E didn't work with it!
@@ -395,7 +395,7 @@ sane-0.73 -> 0.74
There must'nt be a "wait_scanner" in calibration by driver routine!!!
* added usage of driver internal values for calibration by driver if
- the scanner does not give back the informations about the shading data:
+ the scanner does not give back the information about the shading data:
width = dev->width * dev->inquiry_optical_res ( * 3 in RGB-mode )
* added 2 calibration-routines:
@@ -497,7 +497,7 @@ build-2 -> build-3 (sane-1.0.1)
* inversion of calibration is automatically set for Astra 6X0S and Vista S6E
- * check for machine endianess is done only at backend start now!
+ * check for machine endianness is done only at backend start now!
* made umax_do request_sense static
@@ -566,7 +566,7 @@ build-7 -> build-8
* for Mirage D-16L the driver does not wait any more until scanner is repositioned
this is experimental, it may work with other scanners too!
- * Mirage D-16L does not give back informations for calibration by driver,
+ * Mirage D-16L does not give back information for calibration by driver,
added new modus that "guesses" the values for Mirage D-16L.
* Added read_shading_data to 16 bit calibration routine and made a routine for
@@ -594,7 +594,7 @@ build-8 -> build-9
* gamma table is disabled in lineart and halftone modes
- * if image is transmitted completly sane_read (close_pipe)
+ * if image is transmitted completely sane_read (close_pipe)
returns with SANE_STATUS_GOOD in adf mode and in any other case
with SANE_STATUS_EOF
@@ -735,7 +735,7 @@ build-19 -> build-20
* added variable calibration_width_offset, Mirage D-16L offset of 308 is defined there
and added offset of 28 for PowerLook III
- * umax_do_calibration: guessed calibration data vaules use 2 bytes/color if scanner
+ * umax_do_calibration: guessed calibration data values use 2 bytes/color if scanner
supports gamma input bit depth supports 2 bytes/color
* calibration by driver now does work for PowerLook III
@@ -780,7 +780,7 @@ build-21 -> build-22
higher scsi-ID (=priority) does scan without stops,
the other scanner has to wait long time between the
scsi-read commands, it also is possible to give
- bothe scanners different scsi command queueing depth).
+ both scanners different scsi command queueing depth).
* prepared replacement of pipe by sanei_ipc_* routines
@@ -915,7 +915,7 @@ build-25 -> build-26
* added Mirage II as supported scanner
* added routine umax_set_max_geometry that defines available surface
- and resolution in dependance of scansource and double optical resolution
+ and resolution in dependence of scansource and double optical resolution
(before this bugfix the change of dor mode overwrote the settings of
scansource and vice versa)
@@ -927,7 +927,7 @@ build-25 -> build-26
* sane_exit does free devlist
- * added some options for Powerlook 3000 - still is not completly supported
+ * added some options for Powerlook 3000 - still is not completely supported
build-26 -> build-27
@@ -1140,7 +1140,7 @@ build-41 -> build-42
* replaced fork() routines by sanei_thread routines
- * added call sanei_scsi_req_flush_all(); to do_cancel - in threaded case this is not done when reader_process is cancled
+ * added call sanei_scsi_req_flush_all(); to do_cancel - in threaded case this is not done when reader_process is canceled
* in reader_process: marked freed scsi buffers as freed(NULL). This is necessary when reader_process is run as thread!
@@ -1156,7 +1156,7 @@ build-42 -> build-43
build-43 -> build-44
--------------------
- * the sense_hanlder stores the sense data in buffer[0] when valid sense data is avialable
+ * the sense_handler stores the sense data in buffer[0] when valid sense data is available
* do_calibration:
- corrected bug in reading calibration width from scanner (added /bytespp)
@@ -1167,5 +1167,5 @@ build-43 -> build-44
build-44 -> build-45
--------------------
- * added defualt options for Linotype Opal2
+ * added default options for Linotype Opal2
* changed bug in highlight-blue function (using green value)