New upstream version 1.0.28upstream/1.0.28

1 files changed, 38 insertions, 38 deletions

diff --git a/sanei/sanei_scsi.c b/sanei/sanei_scsi.c
index 2413d8f..ca3dbb0 100644
--- a/sanei/sanei_scsi.c
+++ b/sanei/sanei_scsi.c
@@ -252,11 +252,11 @@ static int unit_ready (int fd);
 #endif
 
 #if USE == SYSVR4_INTERFACE
-# define MAX_DATA 56*1024	/* don't increase or kernel will dump 
-				 * tested with adsl, adsa and umax backend 
-				 * it depends on the lowend scsi 
-				 * drivers . But the most restriction 
-				 * is in the UNIXWARE KERNEL witch do 
+# define MAX_DATA 56*1024	/* don't increase or kernel will dump
+				 * tested with adsl, adsa and umax backend
+				 * it depends on the lowend scsi
+				 * drivers . But the most restriction
+				 * is in the UNIXWARE KERNEL witch do
 				 * not allow more then 64kB DMA transfers */
 static char lastrcmd[16];	/* hold command block of last read command */
 #endif
@@ -875,7 +875,7 @@ sanei_scsi_open (const char *dev, int *fdp,
   int fd, i;
 #if USE == LINUX_INTERFACE
   static int first_time = 1;
-#elif USE == MACOSX_INTERFACE  
+#elif USE == MACOSX_INTERFACE
   UInt8 *guid;
   int len;
   u_int d;
@@ -909,7 +909,7 @@ sanei_scsi_open (const char *dev, int *fdp,
          With newer versions of the SG driver, check the available buffer
          size by opening all SG device files belonging to a scanner,
          issue the ioctl calls for setting and reading the reserved
-         buffer size, and take the smallest value. 
+         buffer size, and take the smallest value.
 
          For older version of the SG driver, which don't support variable
          buffer size, try to read /proc/sys/kernel/sg-big-biff ; if
@@ -958,7 +958,7 @@ sanei_scsi_open (const char *dev, int *fdp,
 
     if (sscanf (dev, "b%dt%dl%d", &bus, &target, &lun) != 3)
       {
-	DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
+	DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
 	     dev, strerror (errno));
 	return SANE_STATUS_INVAL;
       }
@@ -1149,7 +1149,7 @@ sanei_scsi_open (const char *dev, int *fdp,
 	}
       else
 	{
-	  DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev,
+	  DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev,
 	       strerror (errno));
 	  return SANE_STATUS_INVAL;
 	}
@@ -1163,7 +1163,7 @@ sanei_scsi_open (const char *dev, int *fdp,
     if (4 !=
 	sscanf (dev, "/dev/passthru0:%d,%d,%d,%d", &bus, &cnt, &id, &lun))
       {
-	DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
+	DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
 	     dev, strerror (errno));
 	return SANE_STATUS_INVAL;
       }
@@ -1222,21 +1222,21 @@ sanei_scsi_open (const char *dev, int *fdp,
   {
 	  char scsi_hca_name[20];
 	  u_int hca = 0;
- 
+
 	  if (sscanf (dev, "h%ub%ut%ul%u", &hca, &bus, &target, &lun) != 4)
 		  {
 			  DBG (1, "sanei_scsi_open: device name %s is not valid\n", dev);
 			  return SANE_STATUS_INVAL;
 		  }
- 
+
 	  snprintf(scsi_hca_name, 19, "\\\\.\\Scsi%d:", hca);
 	  scsi_hca_name[19] = 0;
-	  
+
 	  fd = CreateFile(scsi_hca_name, GENERIC_READ | GENERIC_WRITE,
 					  FILE_SHARE_READ | FILE_SHARE_WRITE,
 					  NULL, OPEN_EXISTING,
 					  FILE_FLAG_RANDOM_ACCESS, NULL );
-	  
+
 	  if (fd == INVALID_HANDLE_VALUE) fd = -1;
   }
 #else
@@ -1420,7 +1420,7 @@ sanei_scsi_open (const char *dev, int *fdp,
     else
       {
 	/* we have a really old SG driver version, or we're not opening
-	   an SG device file 
+	   an SG device file
 	 */
 	if (ioctl (fd, SG_GET_TIMEOUT, &ioctl_val) < 0)
 	  {
@@ -2436,8 +2436,8 @@ issue (struct req *req)
 		  }
 
 #if 0
-		/* Sometimes the Linux SCSI system reports bogus resid values. 
-		   Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers, 
+		/* Sometimes the Linux SCSI system reports bogus resid values.
+		   Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers,
 		   if command queueing is used. So we better issue only a warning
 		 */
 		if (status == SANE_STATUS_GOOD)
@@ -2601,7 +2601,7 @@ issue (struct req *req)
   }
 
   static int			/* Returns 1 if match with 'name' set, else 0 */
-   
+
     lx_scan_sg (int exclude_devnum, char *name, size_t name_len,
 		int host, int channel, int id, int lun)
   {
@@ -2636,7 +2636,7 @@ issue (struct req *req)
   }
 
   static int			/* Returns 1 if match, else 0 */
-   
+
     lx_chk_devicename (int guess_devnum, char *name, size_t name_len,
 		       int host, int channel, int id, int lun)
   {
@@ -2945,8 +2945,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
     char *me = "sanei_scsi_find_devices";
     char path[PATH_MAX];
     char dev_name[128];
-    struct dirent buf;
-    struct dirent *de;
+    struct dirent *buf;
     DIR *scsidevs;
     FILE *fp;
     char *ptr;
@@ -2987,8 +2986,9 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
     number = -1;
     for (;;)
       {
-	ret = readdir_r(scsidevs, &buf, &de);
-	if (ret != 0)
+	errno = 0;
+	buf = readdir (scsidevs);
+	if (errno != 0)
 	  {
 	    DBG (1, "%s: could not read directory %s: %s\n",
 		 me, SYSFS_SCSI_DEVICES, strerror(errno));
@@ -2996,14 +2996,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 	    break;
 	  }
 
-	if (de == NULL)
+	if (buf == NULL)
 	  break;
 
-	if (buf.d_name[0] == '.')
+	if (buf->d_name[0] == '.')
 	  continue;
 
 	/* Extract bus, channel, id, lun from directory name b:c:i:l */
-	ptr = buf.d_name;
+	ptr = buf->d_name;
 	for (i = 0; i < 4; i++)
 	  {
 	    errno = 0;
@@ -3028,7 +3028,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 
 	    if (*end && (*end != ':'))
 	      {
-		DBG (1, "%s: parse error on string %s (%d)\n", me, buf.d_name, i);
+		DBG (1, "%s: parse error on string %s (%d)\n", me, buf->d_name, i);
 
 		i = 12; /* Skip */
 		break;
@@ -3036,7 +3036,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 
 	    if (val > INT_MAX)
 	      {
-		DBG (1, "%s: integer value too large (%s)\n", me, buf.d_name);
+		DBG (1, "%s: integer value too large (%s)\n", me, buf->d_name);
 
 		i = 12; /* Skip */
 		break;
@@ -3059,11 +3059,11 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 	for (i = 0; i < 3; i++)
 	  {
 	    ret = snprintf (path, PATH_MAX, "%s/%s/%s",
-			   SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]);
+			   SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]);
 	    if ((ret < 0) || (ret >= PATH_MAX))
 	      {
 		DBG (1, "%s: skipping %s/%s, PATH_MAX exceeded on %s\n",
-		     me, SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]);
+		     me, SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]);
 
 		i = 12; /* Skip */
 		break;
@@ -3179,7 +3179,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
     scsireq_t hdr;
     int result;
 
-/* xxx obsolete: 
+/* xxx obsolete:
   cdb_size = CDB_SIZE (*(u_char *) src);
 */
 
@@ -3201,7 +3201,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 	/* The old variant:
 	   hdr.databuf = (char *) src + cdb_size;
 	   hdr.datalen = src_size;
-	   xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size)
+	   xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size)
 	 */
 	hdr.databuf = (char *) src;
 	hdr.datalen = src_size;
@@ -5013,7 +5013,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 #if USE == WIN32_INTERFACE
 
 SANE_Status
-sanei_scsi_cmd2 (int fd, 
+sanei_scsi_cmd2 (int fd,
                 const void *cmd, size_t cmd_size,
                 const void *src, size_t src_size,
 		void *dst, size_t * dst_size)
@@ -5049,8 +5049,8 @@ sanei_scsi_cmd2 (int fd,
         pkt.sptd.DataBuffer         = src;
     }
   else {
-       pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED; 
-  }	
+       pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED;
+  }
 
   pkt.sptd.TimeOutValue       = sane_scsicmd_timeout;
 
@@ -5081,7 +5081,7 @@ sanei_scsi_cmd2 (int fd,
       else {
 	 return SANE_STATUS_IO_ERROR;
       }
-   } 
+   }
    else if (pkt.sptd.ScsiStatus != 0) {
       DBG (1, "sanei_scsi_cmd2: ScsiStatus is %d\n",
 	    pkt.sptd.ScsiStatus);
@@ -5152,14 +5152,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
 
 	adapter = (PSCSI_ADAPTER_BUS_INFO)buffer;
 
-	for(i = 0; i < adapter->NumberOfBuses; i++) {	
+	for(i = 0; i < adapter->NumberOfBuses; i++) {
 
 		if (adapter->BusData[i].InquiryDataOffset == 0) {
 			/* No device here */
 			continue;
 		}
 
-		inquiry = (PSCSI_INQUIRY_DATA) (buffer + 
+		inquiry = (PSCSI_INQUIRY_DATA) (buffer +
                                    adapter->BusData[i].InquiryDataOffset);
 
 		while(1) {