diff options
Diffstat (limited to 'ChangeLog-1.0.0')
| -rw-r--r-- | ChangeLog-1.0.0 | 4309 |
1 files changed, 0 insertions, 4309 deletions
diff --git a/ChangeLog-1.0.0 b/ChangeLog-1.0.0 deleted file mode 100644 index 0600ae1..0000000 --- a/ChangeLog-1.0.0 +++ /dev/null @@ -1,4309 +0,0 @@ -1998-11-21 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 1.0 released - - * From Brian J. Murrell: - - * backend/dll.conf: Mention dc210. - - * backend/cderror.h: New file. - * backend/jinclude.h: Ditto. - * backend/djpeg.c: Ditto. - * backend/dc210.desc: Ditto. - * backend/dc210.h: Ditto. - * backend/dc210.c: Ditto. - * backend/cdjpeg.h: Ditto. - - * doc/Makefile.in (SECT5): Mention sane-abaton.5. - * doc/sane-abaton.man: New file. - * backend/abaton.c: Ditto. - (wait_ready): Explicitly cost tv_sec member to (long) in order - to print it (avoids warning on platforms where tv_sec is not a long). - - * backend/abaton.h: Ditto. - * backend/abaton.conf: Ditto. - * backend/abaton.desc: Ditto. - * backend/dll.conf: Mention abaton. - - * Apollo/DomainOS fixes by Paul Walker: - * sanei/sanei_DomainOS.h: Add this missing file. - * sanei/sanei_config2.c: Include <sane/config.h> to get - u_char defined if necessary. - * sanei/sanei_DomainOS.c (upper_string): Delete. - (do_help): Ditto. - * include/sane/config.h.in: Add #undef HAVE_SYS_TIME_H. - - * lib/usleep.c [HAVE_SYS_TIME_H]: Include <sys/time.h> only if - we have it. - - * configure.in (CPPFLAGS): Check for sys/time.h. - - * frontend/gtkglue.c: Move include of <sys/types.h> in front - of include of <sys/stat.h>. - - * config.sub: Apply patch to recognize -sys5.3. - - * backend/microtek.c: Applied Matto's latest patch to upgrade - backend from v0.9 to v0.10. - -1998-11-04 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/microtek2.desc: Mention ScanMaker X6 and Phantom 636. - - * backend/microtek2.c (check_inquiry): Mention Phantom 636 in - model string. - -1998-11-03 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/microtek2.c (check_inquiry): Added patch by Sebastian - Erdmann <serdmann@cs.tu-berlin.de> to recognize ScanMaker X6. - -1998-11-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/artec.c: Print size_t as recommended in backend/GUIDE. - -1998-11-02 Chris Pinkham <cpinkham@infi.net> - - * backend/artec.c: changes to correct bugs when using AT12. - (sense_handler): New function (by Dick Bruijn). - (wait_ready): Ditto (by Dick Bruijn). - (abort_scan): Ditto (by Dick Bruijn). - Support added to read capability data from scanner if the model. - Supports this command (by Dick Bruijn). - Added call to sanei_scsi_close() if detected scanner is not - a Artec/Ultima model (by Francois Ouellet). - Added Negative option. Added Halftone Pattern option. - Added Filter Type option for mono scans. - Added Quality Calibration option. - Moved test_unit_ready command till AFTER we check for ULTIMA scanner. - -1998-11-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * config.guess: Upgrade to libtool v1.2. - * config.sub: Ditto. - * ltconfig: Ditto. - * ltmain.sh: Ditto. - -1998-10-29 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.c (encode_resolution): If MUSTEK_FLAG_DOUBLE_RES - is set, use resultion encoding reported by - <Heiko_Schroeder@t-online.de> - (attach): Set MUSTEK_FLAG_DOUBLE_RES for MSF-06000CZ. Do other - models need this, too? - (calibration): Declare NUM as size_t, not int. #ifdef out this - unused routine. - (reader_process): Print size_t values as %lu with explicit cast - to u_long. - - * backend/mustek.h (MUSTEK_FLAG_DOUBLE_RES): New flag. - - * backend/mustek.c (init_options): Initialize resolution with 18 - dpi, not 100dpi so that "scanimage" without options gives a - preview-quality image that doesn't take much space or time. - - * backend/mustek.c: Updated with Andreas Bolsch's version (adds - support for SE models). - * backend/mustek.h: Ditto. - * backend/mustek.spec: Ditto. - - * backend/pnm.c (sane_read): Replace C++ comment with C comment. - - * backend/microtek2.c: Updated with Bernd's v0.5. - * backend/microtek2.h: Ditto. - * backend/microtek2.conf: Ditto. - - * backend/umax.c: Updated with Oliver's latest version. - * backend/umax.h: Ditto. - * backend/umax-scsidef.h: Ditto. - * backend/umax-scanner.h: Ditto. - * backend/umax-uc630.h: Ditto. - * backend/umax-uc840.h: Ditto. - * backend/umax-ug630.h: Ditto. - * backend/umax-ug80.h: Ditto. - * backend/umax-uc1200s.h: Ditto. - * backend/umax-uc1200se.h: Ditto. - * backend/umax-uc1260.h: Ditto. - * backend/umax.conf: Ditto. - * include/sane/saneopts.h: Ditto. - * doc/sane-umax-doc.html: Ditto. - * doc/sane-umax-doc.tex: Ditto. - * doc/sane-umax.man: Ditto. - -1998-10-28 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane.tex (subsection{sane_control_option}): Clarify that - paramter "v" is ignored for SET_AUTO calls. - - * frontend/saned.c (init): Initialize w->version. - - * backend/net.c (connect_dev): Accept version code 2 and - set peer's version code in dev->wire.version. - - * include/sane/sanei_wire.h: New member "version". - - * sanei/sanei_net.c (sanei_w_control_option_req): Encode - option value only if peer_version is < 3 or if action is - not SANE_ACTION_SET_AUTO. - - * include/sane/sanei_net.h (SANEI_NET_PROTOCOL_VERSION): Up - protocol version to version 3. - - * sanei/sanei_net.c (sanei_w_control_option_req): Transcode - value_type, value_size, and value only if req->action != - SANE_ACTION_SET_AUTO. Reported by Petter Reinholdtsen. - - Patches by Petter Reinholdtsen <pere@hungry.com>: - - * backend/dmc.c (attach_one): Don't use C++-style comments. - - * backend/dc25.h (DEFAULT_TTY_BAUD): New macro. Move SPEEDS macro - to dc25.c. - - * backend/dc25.c: Initialize tty_baud to DEFAULT_TTY_BAUD. Use - B57600 and B115200 only if defined. - - * doc/saned.man: Mention that hostname matching no longer is case - significant. - - * configure.in - (lib/Makefile.in,lib/strcasecmp.c,frontend/saned.c): Use - strcasecmp() instead of strcmp to compare DNS hostnames. Case is - irrelevant when using DNS. - - * backend/dll.c: Add support for HP-UX 10.xx style shared - libs. - - * configure.in include/sane/config.h.in backends/dll.c: - Use dhl_load() family for DLL support on HP/UX. - - * backend/snapscan.c (sane_snapscan_open): Don't cast lvalue - (illegal according to ANSI C, I think). - - * backend/apple.c (init_options): Add explicit "break" after - "default:" to make HP-UX compiler happy (?). - (sane_read): Make stuff after #endif a comment. - - * backend/agfafocus.c: New file (by Karl Anders Oygard - <karlo@opera.no>). - * backend/agfafocus.h: Ditto. - * doc/sane-agfafocus.man: Ditto. - - * doc/sane-net.man: Fix typo: network service is called "sane", - not "saned" (by Andreas Dilger <adilger@enel.ucalgary.ca>). - - * backend/hp-scl.c (sanei_hp_scsi_pipeout): Use SIGPWR only if its - defined (by Peter Kirchgessner). - - * frontend/Makefile.in (INCLUDES): Mention @GTK_CFLAGS@ as part of - INCLUDES macro instead of CFLAGS. Despite its name, @GTK_CFLAGS@ - is guaranteed to contain CPP include directives only. (Reported - by Kevin Dalley <kevind@rahul.net>.) - -1998-10-27 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_scsi.c (sanei_scsi_open): Return - SANE_STATUS_ACCESS_DENIED if open() fails with errno==EACCES. - - * backend/ricoh-scsi.c: #ifdef out unused code and print values of - type size_t as prescribed in the file backend/GUIDE. - - * backend/dll.conf: Mention Ricoh backend. - - * backend/ricoh.c: New file (by Ricoh Dillema). - * backend/ricoh.h: Ditto.. - * backend/ricoh-scsi.c: Ditto.. - - * backend/microtek.c: Apply Aug 7 patch by Matto Marjanovic. - - * backend/dc25.c: Apply patch by Peter Fales (v1.1). - * backend/dc25.desc: Ditto. - * doc/sane-dc25.man: Ditto. - - * backend/pnm.c: Applied patch by Goran Thyni <goran@bildbasen.se> - that allows scanning parts of a PNM image. - - * backend/GUIDE: Add Matto's comment on .desc files. - - * backend/hp.c: New file from Peter Kirch (formerly known as xhp). - * backend/hp.h: Ditto. - * backend/hp-accessor.h: Ditto. - * backend/hp-device.h: Ditto. - * backend/hp-handle.h: Ditto. - * backend/hp-option.h: Ditto. - * backend/hp-scl.h: Ditto. - * backend/hp-scsi.h: Ditto. - * backend/hp-accessor.c: Ditto. - * backend/hp-device.c: Ditto. - * backend/hp-handle.c: Ditto. - * backend/hp-hpmem.c: Ditto. - * backend/hp-option.c: Ditto. - * backend/hp-scl.c: Ditto. - * backend/Makefile.in (libsane-hp.la): Make libsane-hp.la - dependent upon hp-accessor.lo, hp-device.lo, hp-handle.lo, - hp-hpmem.lo, hp-option.lo, and hp-scl.lo. - -1998-10-22 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-hp.man (Model): Mention HP6200 as per report by Tom - Martone <tommartone@erols.com>. - -1998-07-30 David Mosberger-Tang <David.Mosberger@acm.org> - - * include/sane/config.h.in: Apply Cory Kempf's - <ckempf@enigami.com> FreeBSD CAM support patch. - * sanei/sanei_scsi.c: Ditto. - * tools/find-scanner.c: Ditto. - * configure.in: Ditto. - -1998-07-27 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.74 released. - - * configure.in (CPPFLAGS): Save old CPPFLAGS in saved_CPPFLAGS and - then set CPPFLAGS (not saved_CPPFLAGS!) to include GTK_CFLAGS. - This should get GIMP detected again. - - * frontend/xscanimage.c (init): Add missing newline. - - * backend/net.c (sane_init): Look for service "sane", not "saned". - - * configure.in (V_MINOR): Make it 74. - - * tools/sane-desc.el: Hack a bit so sane-backends.html can be - generated some place other than the working directory - (which may not be writable). - - * tools/sane-desc.el: New file by Matto. - - * doc/Makefile.in (sane-backends-html): New rule to generate - sane-backends.html. - - * backend/apple.desc: List sane-apple man page. - - * backend/umax.c: Updated with Oliver's latest version (with Irix - 4MB workaround). - - * backend/microtek.c: Updated with Matto's v0.9. - * backend/microtek.h: Ditto. - * backend/microtek.conf: Ditto. - * backend/microtek.desc: Ditto. - * doc/sane-microtek.man: Ditto. - - * backend/apple.h: Updated with Milon's v0.3. - * backend/apple.c: Ditto. - - * doc/sane-apple.man: New file (contributed by Milon Firirkis). - -1998-07-23 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/canon-scsi.c (reserve_unit): Don't compile unused - reserve_unit(). - - * sanei/sanei_scsi.c: Apply Yuri's patch to add - sanei_scsi_find_devices() support to OS/2. - - * sanei/sanei_pio.c: Include <sane/sanei_backend.h> instead of - just <sanei/sanei_debug.h> so we pick up #define's for inb and - out. - - * include/sane/config.h.in: Mention HAVE_OS2_H and - HAVE_SYS_TYPES_H. - - * configure.in (AC_CHECK_HEADERS): Mention sys/hw.h and - sys/types.h. - (AC_CHECK_LIB): Check for syslog. - (AC_CHECK_FUNCS): Check for _portaccess. - (CPPFLAGS): Don't disable qcam backend if we have _portaccess. - These patches contributed by Yuri for the benefit of OS/2. - - * backend/qcam.c (qc_unlock) [!F_SETLK]: Fall back to convention - UNIX-style locking using O_EXCL (not ideal, but better than - nothing at all). - (qc_lock_wait): Ditto. - - * sanei/sanei_scsi.c (KillDomainServer): Add missing paren. - - * lib/usleep.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>. - - * include/sane/sanei_backend.h: Define i/o-port access - compatibility macros (by Yuri Dario). - - * backend/Makefile.in (CONFIGS): Mention dummy saned.conf - (this really ought to go in frontend/Makefile, but I'm too lazy to - add a configuration-install rule there...). - - * backend/coolscan.c: Update with Didier's latest version. - (send_one_LUT): Merge in alloca() fix from 1998-04-04. - -1998-07-22 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/dll.conf: Mention artec backend. - - * backend/mustek.c (sane_start): Remove duplicate status test. - -1998-07-21 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/saned.c (main): Look for service name "sane", not - "saned". - -1998-07-20 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/epson.c (epson_cmd): Add patch by Holger Frahm - <frahm@itp.uni-hannover.de> to support GT9500. - - * backend/microtek.c: Update with latest version (v0.8). - - * backend/artec.c (PREFER_PIXEL_MODE): Apply Chris Pinkham's - 6/4/98 patch to add preliminary support for AT6 and AT12 scanner - models. - - * backend/epson.c: Apply Christian Bucher's patch. - - * backend/dc25.h: New file (by Peter Fales <psfales@earthling.net>) - * backend/dc25.c: Ditto. - * backend/dc25.conf: Ditto. - * doc/sane-dc25.man: Ditto. - - * backend/microtek2.c: Replace dynamically sized array with - alloca() to be ANSI C compliant. - - * backend/epson.c: Replace zero-sized byte arrays with 1 byte - arrays to be ANSI C compliant. - - * doc/sane-hp.man: Mention ScanJet 3P (reported by Patrick Debois - <Patrick.Debois@lin.vlaanderen.be>). - - * backend/umax.c: Updated with Oliver's 5/7/98 patch. - -1998-07-20 Chris Pinkham <cpinkham@infi.net> - - * backend/artec.c: Added code to default to using millimeters - instead of pixels for measurements, can revert to pixels by - defining PREFER_PIXEL_MODE at compilation time. - - Added code to cause sane_read to block until data available to return, - also buffers as much data as possible before returning. - - Added code to cause sane_read to read as much data from scanner as - possible for each call, previously would read 1 line max from - scanner. - - Added code to attempt to detect scanner capabilities from scanner - if scanner supports this command, it not program has defaults - coded in for certain scanner models. - - Separated horizontal and vertical resolution settings with ability - to bind them together. This still has a bug, so the option is is - disabled by default until I can get it working correctly. - - Bug-fixes to get backend working properly with xscanimage. - Added preview mode option. - Added threshold option. - - * backend/artec.h: Added options codes to go along with options - added in artec.c file. - -1998-07-20 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/epson.c (scsi_write): Apply patch by Thomas Bogendoerfer - <tsbogend@alpha.franken.de> to get Epson backend to work for SCSI - scanners again. - -1998-06-05 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.c (attach): Move dev_wait_ready() after the check - for a Mustek scanner. This is to make sure we don't issue any - command other than INQUIRY to SCSI devices that are not known to - be Mustek scanners. - -1998-05-22 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/dmc.c: Updated with David Skoll's latest patch. - - * sanei/sanei_scsi.c (sanei_scsi_find_devices): Declare missing - findtype arg for dummy sanei_scsi_find_devices(). - -1998-05-16 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/hp.c (attach): Return right after INQUIRY if the device - doesn't look like an HP scanner. - -1998-05-15 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.73 released. - - * backend/mustek.c (attach): Initialize *devp to 0. - - * configure.in: Use AM_PATH_GTK to figure out if/how to compile - with gtk libs. - - * aclocal.m4: Include gtk.m4 from gtk-1.0.1 distribution. - - * backend/Makefile.in (install): Change install rule so there is - guaranteed to be a (symlink) of the form - libsane-$(BACKEND).so.$(V_MAJOR) pointing to the right version - of a dll. - - * backend/dll.c (load): Get rid of .la parsing non-sense. Instead, - always attempt to open libsane-$(BACKEND).so.$(V_MAJOR). - - * backend/mustek.c (sane_init): Make sure empty lines really - are ignored. - -1998-05-13 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/microtek2.conf: Add line "scsi * * Scanner". - * backend/microtek.conf: Ditto. - - * sanei/sanei_scsi.c (get_devicename): New function. - - * sanei/sanei_config2.c: New file. - - * sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_config2. - (LIBSANEI_LTOBJS): Ditto. - - * sanei/sanei_scsi.c (sanei_scsi_find_devices): New function - (comes in two flavors: one for Linux, one for the remaining - platforms). - - * include/sane/sanei_scsi.h: New function. - - * doc/sane-dll.man: Fix to make it work with man2html (use - \- instead of -). - * doc/sane-dmc.man: Ditto. - * doc/sane-epson.man: Ditto. - * doc/sane-hp.man: Ditto. - * doc/sane-microtek.man: Ditto. - * doc/sane-microtek2.man: Ditto. - * doc/sane-mustek.man: Ditto. - * doc/sane-pint.man: Ditto. - * doc/sane-scsi.man: Ditto. - * doc/sane-umax.man: Ditto. - * doc/saned.man: Ditto. - * doc/scanimage.man: Ditto. - * doc/xscanimage.man: Ditto. - - * doc/Makefile.in (MAN2HTML): New macro. - (html-man): New rule to generate HTML version of man-pages. - - * configure.in (V_MINOR): Up to 73. - - * backend/umax.conf: Add lines "scsi UMAX" and "scsi LinoHell - Office". - - * backend/microtek2.h: New file (by Bernd Schroeder - <bernd@aquila.muc.de>). - * backend/microtek2.c: Ditto. - * backend/microtek2.conf: Ditto. - - * backend/dll.conf: Mention "microtek2". - - * backend/apple.conf: Add line "scsi APPLE". - * backend/mustek.conf: Add lines for "scsi MUSTEK" and "scsi - SCANNER". - - * backend/apple.c (attach_one): New function. - (sane_init): Use sanei_config_attach_matching_devices(). - * backend/artec.c: Like for apple.c. - * backend/canon.c: Ditto. - * backend/coolscan.c: Ditto. - * backend/dmc.c: Ditto. - * backend/epson.c: Ditto. - * backend/hp.c: Ditto. - * backend/microtek.c: Ditto. - * backend/mustek.c: Ditto. - * backend/s9036.c: Ditto. - * backend/snapscan.c: Ditto. - * backend/tamarack.c: Ditto. - -1998-05-11 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/snapscan.c (sane_snapscan_get_parameters): Always set - depth of 8. - - * configure.in: Check for gtk_tooltips_set_tips _after_ gtk - libraries have been located. (Patch by Jake E. Hamby - <jehamby@lightside.com>). - -1998-05-09 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/Makefile.in (.c.o): Patch by Kaz Sasayama - <Kaz.Sasayama@hypercore.co.jp>: invoke $(COMPILE) if libtool - doesn't give us a regular .o file. - * lib/Makefile.in (.c.o): Ditto. - - * frontend/preview.c (preview_update): Call update_selection() so - selection is updated when scanwindow geometry changes. The patch - from 1998/4/2 never worked satisfactorily (and indeed was never - enabled in any of the SANE releases). - -1998-05-06 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.c (sane_init): Use sanei_config_skip_whitespace() - to skip whitespace. - -1998-05-05 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xscanimage.c (init): Allow -g as an option. - - * sanei/sanei_config.c (sanei_config_get_string): New function. - (sanei_config_skip_whitespace): Ditto. - - * backend/umax.c: Updated with Oliver's latest patch. - - * Makefile.in (INSTALLED_INCLUDES): Mention sanei_readproc.h. - - * backend/microtek.h: Updated with Matto's 0.7 patch. - * doc/sane-microtek.man: Ditto. - * backend/microtek.c: Ditto. - Added precalibration code: tries to intelligently have scanner - run a calibration only once when necessary --- this shaves a solid - six seconds off every scan! - Added model code/vendor name for ScanMaker 600ZS. - Added model codes/vendor name for Agfa Arcus II, StudioScan, - StudioScan II. - Patched up 3-pass scanning (forgot to switch color planes). - Corrected IIHR to 600dpi base resolution. - Check so that 0x0 regions are recognized as invalid. - Fixed subtle buffering bug in color scans. - Fixed-up active/inactive dependencies among options. - Make sure shadow <= midtone <= highlight. - Let shadow/midtone/hightlight be active during LineArt and Halftone. - "Halftoning" option moved into Scan Mode Group (from Enhancement). - Removed some illegal "TEST_UNIT_READY" commands (during scan). - Removed "MODE_SENSE_1", since it didn't quite work anyway. - -1998-05-03 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xscanimage.c (scan_preview): Don't register - preview_window_destroyed as a delete_event handler. - -1998-05-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/Makefile.in: Remove unused LIBLIB macro. - -1998-04-30 David Mosberger-Tang <David.Mosberger@acm.org> - - Patches by Matto Marjanovic: - - * frontend/gtkglue.c (gsg_close_dialog_callback): Remove - client_data pointer arg. - - * frontend/xscanimage.c (scan_win_delete): Remove GdkEvent arg. - (preview_window_destroyed): Ditto. - (input_available): Include bad_depth handling code only if - HAVE_LIBGIMP_GIMP_H is defined. - (scan_dialog): Remove client_data pointer arg. - -1998-04-29 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.c (gsg_get_filename): Use gtk_events_pending() - instead of gdk_events_pending(). - * frontend/preview.c (input_available): Ditto. - * frontend/xscanimage.c (quit_xscan): Ditto. - (input_available): Ditto. - -1998-04-08 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_pio.c (sanei_pio_open): Fix prototype. - -1998-04-07 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.72 released. - - * backend/epson.c (sane_init): Fix up config file reading - to be more like that of other backends. - (PATH_MAX): Use PATH_MAX instead of FILENAME_MAX. - - * backend/canon.c (sane_init): Read & process canon.conf (patch by - Yuri Dario <mc6530@mclink.it>). - -1998-04-06 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_init_debug.c (sanei_init_debug): Move up #endif - so NULL-test works for OS/2, too. - - * frontend/saned.c: Include <sys/types.h>. - - * backend/snapscan.c: Don't include non-ANSI <values.h>. - (sane_snapscan_start): Use INT_MAX instead of MAXINT. - (PATH_MAX): Define PATH_MAX as 1024 if not defined otherwise. - -1998-04-05 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/umax.c: Updated with Oliver's latest version - (0.72pre-a). - -1998-04-04 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/coolscan.c: Do lalloca.h spiel instead of including - alloca.h. - - * configure.in: Look for glib/include directory in /usr/local/lib - and /usr/lib. Add $C_SWITCH_X_SITE to CPPFLAGS, not DEFS. - - * doc/sane-mustek.man: Mention MFS-1200SP v1.07 as working as - reported by ehramm@dk3uz.hh.provi.de (Edmund H. Ramm). - -1998-04-03 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/canon-scsi.c (request_sense): ifdef out to quiet down - gcc. - - * backend/artec.c (read_data): Print size_t as (u_long) to make it - work right and without compiler warning both on 32 and 64 bit - platforms. - (artec_get_status): Ditto. - (init_and_start_scan): Ditto. - (sane_start): Ditto. - (sane_read): Ditto. - (artec_buffer_line_offset): Declare LEN as size_t. - * backend/epson.c (sane_read): Ditto. - - * sanei/sanei_pio.c (pio_wait): Initialize STAT with 0 to quiet - down gcc. - - * backend/Makefile.in (libsane-epson.la): Mention sanei_pio.lo. - (libsane-dll.la libsane.la): Ditto. - - * sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_pio.o. - (LIBSANEI_LTOBJS): Mention sanei_pio.lo. - - * frontend/xcam.c (input_available): Undo braindamage regarding - break out of scan loop (the SANE docs _do_ specify that in - blocking mode, *len==0 implies end of scan). - * frontend/xscanimage.c: Ditto. - - * doc/sane-dmc.man: New file by David Skoll. - - * sanei/sanei_DomainOS.c: New file by Paul Walker. - - * backend/snapscan.c (DL_INFO, DL_MAJOR_ERROR): Up error code to 1 - to avoid printing anything unless the user specifically asked - for this. - - * include/sane/sanei_debug.h (DBG_LEVEL): Define debug level - variable as macro DBG_LEVEL. - - * README.solaris (NOTE): Emphasize that generic scsi driver - needs to be installed before running configure. - - * backend/s9036.c: Don't depend on GNU C dynamically sized arrays. - - * backend/coolscan.c (send_one_LUT): Use alloca() instead of - depending on GNU C dynamically sized arrays. - Include <alloca.h>. - - * frontend/xscanimage.c (input_available): Break out of the - loop only if LEN==0 _and_ we have a non-negative input tag. - * frontend/xcam.c (input_available): Ditto. - - * backend/microtek.c (parse_inquiry): Handle for ScanMaker 35t+. - (id_microtek): Ditto. - -1998-04-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * configure.in (CPPFLAGS): Check for libXi. - - * frontend/gtkglue.c (panel_destroy): Clear dialog elements - after destroying the panel. - - Patches by Christian Bucher <cbucher@vernetzt.at>: - - * include/sane/sanei_pio.h: New file. - * sanei/sanei_pio.c: Ditto. - * backend/epson.c, backend/epson.h, backend/epson.conf: Updated - with Christian's version adds support for parallel port interface. - - * sanei/sanei_scsi.c (sanei_scsi_req_wait): Patch by Matto to let - sense-handler decide whether a non-zero sense_buffer[0] really - should be considered an error (needed for Microtek backend). - - * doc/sane.tex (\subsubsection{Option Value Unit}): Document new - unit SANE_UNIT_MICROSECOND. - - Patches by Oliver Rauch: - - * frontend/gtkglue.c (unit_string): Handle SANE_UNIT_MICROSECOND. - * frontend/scanimage.c (print_unit): Ditto. - (parse_scalar): Ditto. - - * include/sane/sane.h: Add SANE_UNIT_MICROSECOND. - - * Upgrade to Kevin's latest SnapScan backend (0.4). - - * doc/sane-hp.man: Mention ScanJet IIp C1790A as working (reported - by Ronald.Vogelaar@nl.origin-it.com). - - * frontend/xscanimage.c (init): Issue an error message when we see - option -g as this is most likely due to someone invoking - xscanimage through GIMP when GIMP support is missing. - (scan_done): Add sanity check. - (scan_start): Ditto. - - * Upgraded to Matto's latest Microtek backend (0.6). - - * Upgraded to Oliver's latest UMAX backend (0.71h). - - * frontend/preview.c (draw_selection): Fix so that selection is - updated when sliders are moved. Patch by Mikko Tyo"la"ja"rvi. - - * backend/snapscan.c (DL_INFO): Increase from 0 to 1. - (DL_MAJOR_ERROR): Ditto. This avoids printing error messages - unless the user specifically requests them. - - * frontend/gtkglue.c: Include <sys/types.h>. - - * include/sane/config.h.in: Ignore HAVE_USLEEP under Apollo - Domain. - - Patches by Paul Walker: - - * sanei/sanei_scsi.c: New Domain OS code. - - * tools/find-scanner.c: Include <sane/config.h>. - - * lib/usleep.c (usleep): Use time_$wait() to avoid broken usleep() - implementation in Domain Sys5.3 environment. - - * config.sub: Translate sys5.3 into sysv3 for the benefit - of Apollo Domain/OS. - - * sanei/sanei_init_debug.c (sanei_init_debug): Use DosScanEnv() - instead of getenv() under OS/2. (Patch by Yuri Dario - <mc6530@mclink.it>) - -1998-03-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xcam.c (main): Remove obsolete call to - gdk_set_debug_level (0). - - * backend/mustek.c (attach): Print debug message when discovering - unknown model. - - * doc/sane-scsi.man: Mention Adaptec 1505. - - * tools/find-scanner.c (main): List FreeBSD specific device names. - - * tools/Makefile.in (LIBS): Define. - (find-scanner): Mention $(LIBS). - - * backend/epson.conf: New file. - - Patches by Yuri Dario <mc6530@mclink.it>: - - * backend/epson.c (sane_init): Support config file. - - * sanei/sanei_ab306.c (outb): Add missing parens. - - * backend/snapscan.c: Don't include <values.h> - - * backend/net.c: Include netdb.h after in.h to appease OS/2. - Include <sys/types.h>. - - * sane-0.71.spec (%files): Mention sane-dmc.5. - * doc/Makefile.in (SECT5): Ditto. - - * backend/dmc.c, backend/dmc.h: Update with Feb 26 patch from - David Skoll. - * doc/dmc.man: New file by David Skoll. - -1998-02-25 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/dmc.c (DMCSetMode): Add missing field name (patch by - Martin Huber). - - * tools/find-scanner.c (main) [__sun]: Add missing command (patch - by Martin Huber. - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Fix typo: fd_Info->fd_info - (patch by Jeff Freedman). - - * configure.os2: Update with patch by Jeff Freedman. - - * backend/snapscan.c (sane_snapscan_start): Replace non-standard - MAXINT by INT_MAX from <limits.h>. - (PATH_MAX): Define PATH_MAX as 1024 if not defined by headers. - -1998-02-23 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.71 released. - - * backend/dmc.c (DMCAttach): Close scsi fd before returning. - - * backend/microtek.c: Default to no_dump. - (sane_init): Change "nodump" into "dump" option. - * doc/sane-microtek.man: Document this change. - - * backend/snapscan.c: Include <sane/sanei_config.h>. - (sane_snapscan_init): Use sanei_config_open() instead of fopen(). - - * backend/snapscan.c: Upgrade to latest version (0.3 patch 7). - * backend/snapscan.h: Ditto. - - * configure.in (V_MINOR): Up version to 0.71. - - * sanei/sanei_scsi.c (scsi_cmd) [USE == SOLARIS_INTERFACE]: "or" - in lun instead of overwriting cdb[1] (patch by Martin Huber - <hu@garfield.m.isar.de>). - - * backend/snapscan.c: Replace <posix1_lim.h> with <limits.h>. - - * backend/mustek.c (fix_line_distance_mfs): Add back missing - multiplication by bpl (patch by Stefano Garavaglia - <alter.ego@iol.it>). - - * backend/coolscan.c: Updated with Didier's latest version. - (COOLSCAN_CONFIG_FILE): Rename from PATH_COOLSCAN_CONFIG and - define as "coolscan.conf". Include <sane/sanei_config.h>. - (sanei_init): Use sanei_config_open() instead of fopen(). - - * backend/coolscan-scsidef.h: Ditto. - * backend/coolscan.h: Ditto. - - * backend/hp.c (sane_close): Change s to s->next (patch by David - Skoll <dskoll@chipworks.com>). - -1998-02-17 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/Makefile.in (PRELOADABLE_BACKENDS): Mention apple & - coolscan. - - * backend/coolscan.c: New file (by Didier Carlier - <didier@sema.be>).. - * backend/coolscan.h: Ditto. - * backend/coolscan-scsidef.h: Ditto. - - * backend/apple.c: Include <sane/sanei_config.h> - (APPLE_CONFIG_FILE): Rename from PATH_APPLE_CONFIG. - (sane_init): Use sanei_config_open(). - - * backend/apple.conf: New file. - - * backend/dll.conf: Mention apple & coolscan backends. - - * backend/apple.c: New file (by Milon Firikis - <milonf@isosun.ariadne-t.gr>). - * backend/apple.h: Ditto. - - * sane-0.70.spec: Make symlink for libsane.so.0. - - * doc/sane-epson.man: Mention GT-5500 scanner as working (as - reported by Umberto Zanatta <uzanatta@foscolo.org>). - -1998-02-12 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_scsi.c (DOMAINOS_INTERFACE): Define. Add - Apollo Domain/OS support contributed by Paul Walker. - - * configure.in (AC_CHECK_HEADERS): Mention apollo/scsi.h. - Add #undef of HAVE_APOLLO_SCSI_H. Add type checks for u_char, - u_int, u_long (DomainOS reportedly needs these). - - * sanei/sanei_scsi.c (sanei_scsi_req_wait) [USE == - LINUX_INTERFACE]: Always check for a non-zero error code in the - sense-buffer. The Linux sg driver guarantees that the sense - buffer is clear to zero when no sense code has been requested, so - this is safe. - -1998-01-28 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.7 released. - -1998-01-27 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xscanimage.c (quit_xscan): Exit with status 0, not 1. - - * tools/xerox (scale): Added improvements contributed by Joachim - Woll <woll@physik.uni-kassel.de>. - - * Upgrade to Oliver's latest UMAX backend. - - * include/Makefile.in (distclean): Add empty all rule. Add - distclean rule to delete Makefile. - - * Makefile.in (distclean): Delete japi/Makefile as well (this - command should be removed once japi gets added to SUBDIRS). - - * backend/Makefile.in (EXTRA): Remove ../lib/usleep.lo and - ../lib/strndup.lo. - (libsane.la): Make dependent on $(LIBOBJS). - - * frontend/xscanimage.c (preview_window_destroyed): Declare second - arg (added in some version of gtk?). - - * tools/find-scanner.c (main): Change __sgi__ to __sgi. - -1998-01-26 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/microtek.c: Don't declare strdup()---you're bound to get - it wrong for some platforms! - - * doc/sane-scsi.man: Say explicity that generic SCSI support needs - to be enabled. - - * doc/sane-hp.man (Problems): Document PhotoSmart problems - as reported Peter Kirchgessner <Pkirchg@aol.com>. - - * backend/snapscan.c: Upgrade to v0.3 from - http://www.cs.ualberta.ca/~charter/snapscan.html. - * backend/snapscan.h: Ditto. - -1998-01-22 David Mosberger-Tang <David.Mosberger@acm.org> - - SnapScan backend by Franck Schnefra, Michel Roelofs and - Kevin Charter: - - * backend/snapscan.c: New file. - * backend/snapscan.h: Ditto. - * backend/snapscan.conf: Ditto. - - * backend/umax-scanner.h (scanner_str): Add missing comma. - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Pass sense_handler_arg to - sense handler for BSD_INTERFACE, HPUX_INTERFACE, - OPENSTEP_INTERFACE, DECUNIX_INTERFACE, SCO_OS5_INTERFACE, - OS2_INTERFACE, IRIX_INTERFACE, AIX_GSC_INTERFACE, and - SOLARIS_INTERFACE. - - * include/sane/config.h.in: Add missing #undef of - HAVE_SYS_SCSI_TARGETS_SCGIO_H. - Ditto for HAVE_SYS_SCSI_SGDEFS_H. - -1998-01-20 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.69 released. - - * doc/sane-scsi.man: Limit ncr810 patch to kernel versions < - 2.0.33. - - * tools/xerox (HEIGHT): Add A4 paper size as comment. - -1998-01-19 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/preview.c (make_preview_image_path): New function. - (preview_destroy): Save scan surface parameters as a comment - in the preview image. - (restore_preview_image): Read scan surface parameters from - preview image file and restore only if the parameters match - the currently selected surface. - (paint_image): Gracefully handle NULL image_data. - (event_handler): Don't call restore_preview_image(). - (preview_update): Detect if the scan surface changed. If so, - establish a new preview widget size, preview area size, and - restore a preview image, if available. - - * backend/mustek.c (sense_handler): Declare closure argument. - - * sanei/sanei_scsi.c (sanei_scsi_open): Fix typos. - - * backend/umax-scsi.c (umax_open_scanner): Pass us as sense_arg. - (umax_open_scanner): Ditto. - (umax_open_scanner): Ditto. - * backend/umax.c (sane_start): Ditto. - - * backend/canon.c (attach): Pass 0 as sense_arg to sanei_scsi_open(). - (sane_start): Ditto. - * backend/epson.c (attach): Ditto. - (sane_start): Ditto. - * backend/tamarack.c (sense_handler): Ditto. - * backend/s9036.c (sane_start): Ditto. - * backend/mustek.c (dev_open): Ditto. - * backend/hp.c (attach): Ditto. - (sane_start): Ditto. - * backend/mustek.c (dev_open): Ditto. - * tools/find-scanner.c (main): Ditto. - - * include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): Declare - closure arg. - (sanei_scsi_open): Ditto. - - * doc/sane-hp.man (Model): Remove obsolete comment regardign 5P. - -1998-01-17 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.c (dev_open): Fix debug message. - - * Solaris related patches by Martin Huber: - - * backend/umax-scsi.c (umax_wait_scanner): Sleep for 1 second - instead of 100ms on Sun platforms---the SCHILYscg driver prints a - warning message each time a device is busy. Duh. - (umax_get_data_buffer_status): Don't do - umax_get_data_buffer_status() on Sun's. This should be fixed... - - * sanei/sanei_scsi.c (sanei_scsi_open): Call unit_ready() towards - the end of this function. - (CCS_SENSE_LEN): Define as 18 if not defined - by any header files. - (sanei_scsi_cmd): Use sensebuffer to collect sense info. - (scsi_cmd): Better error handling when using SCHILYscg driver. - -1998-01-14 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xscanimage.c (scan_start): Turn off dialog sensitivity. - (scan_done): Restore dialog sensitivity. - - * backend/qcam.c (init_options): Turn on SANE_CAP_ALWAYS_SETTABLE. - - * frontend/preview.c (scan_done): Enable dialog sensitivity. - (scan_start): Disable dialog sensitivity. - - * include/sane/sane.h (SANE_CAP_ACTIVE_WHILE_SCANNING): New - manifest constant. - -1998-01-12 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.c (panel_destroy): Call gtk_tooltips_unref() - instead of gtk_tooltips_destroy() as suggested by Ben Gertzfield - <che@debian.org>. - -1997-12-25 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/canon.c: New file by Helmut Koeberle - <helmut.koeberle@bytec.de>. - (sane_start): Print variables of type size_t as %lu and cast to - (u_long), to make it compile without warning on all platforms. - (attach): Remove extraneous semicolon. - - * backend/canon.h (canon_h): Ditto - * backend/canon-scsi.c: Ditto. - -1997-12-24 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_ab306.c (sanei_ab306_cmd): Write the first - 6 bytes of a SCSI command only (suggested by Andreas, but - is this really correct??). - - * backend/mustek.c (gamma_correction): Add patch by Andreas - Czechanowski <andreas@inspc44c.ins.uni-stuttgart.de> to - fix lineart scanning for Paragon II 600 N scanner. - -1997-12-23 David Mosberger-Tang <David.Mosberger@acm.org> - - * tools/find-scanner.c (scanner_identify_scanner): Print info on - all SCSI devices when --verbose is in effect. - (main): Add Sun device names. - - * include/sane/config.h.in: Define _POSIX_SOURCE and - __EXTENSIONS__ when compiling on a Sun with GCC. - - * configure.in (AC_CHECK_HEADERS): Mention sys/scsi/sgdefs.h and - sys/scsi/targets/scgio.h. - -1997-12-17 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xscanimage.c (device_dialog): Suggestion by Matt: set - window auto-shrink by calling gtk_window_set_policy(). - - * japi/ImageCanvas.java: Updated with Jeff's latest patch. - * japi/Jscanimage.java: Ditto. - * japi/Makefile.in: Ditto. - * japi/README.JAVA: Ditto. - * japi/ScanIt.java: Ditto. - * japi/ImageCanvasClient.java: New file. - -1997-12-16 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.c (panel_build): Patch by Matt: a) For all - individual options flagged as "advanced", panel_build will only - display the option if the "Show advanced" button is toggled. - Group identifiers flagged as "advanced" are handled the same as - before. b) panel_rebuild is called whenever the "Show advanced" - button is toggled on or off. - - * doc/sane-scsi.man: Mention sane-epson(5) and sane-microtek(5). - * doc/scanimage.man: Ditto. - * doc/xscanimage.man: Ditto. - - * doc/sane-microtek.man: New file by Matt. - - * backend/microtek.c: Updated with Matt's version 0.4. - * backend/microtek.h: Ditto. - * backend/microtek.conf: Ditto. - - * doc/Makefile.in (SECT5): Mention sane-microtek.5. - -1997-12-15 Fred Hucht & Michael Staats <{fred|michael}@thp.Uni-Duisburg.DE> - - * Added support for generic SCSI under AIX 4.1.x using the device - driver gsc written by Matthew Jacob <mjacob@feral.com> (nice piece - of work!). - Find this driver under - ftp://ftp.feral.com/pub/aix/gsc.tar.gz or - ftp://ftp.thp.Uni-Duisburg.DE/pub/source/gsc.tar.gz. - Changed files: sanei/sanei_scsi.c, include/sane/config.h.in, - configure.in. - - * Moved '#include <lalloca.h>' to very beginning in all source - files as AIX needs it there. - - * Added define OUTFILENAME to frontend/xscanimage.c. - - * Fixed wrong environment reference in /doc/sane-scsi.man. - - * Several changes in tools/find-scanner.c to run using - above mentioned driver. - Fixed wrong IN_periph_devtype_cpu (was 1, should be 3). - -1997-12-14 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-hp.man: Mention ScanJet 4P (reported to work by - Adam Sjoegren <asjo@diku.dk>). - -1997-12-09 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/saned.c (check_host): Change len from size_t to int to - match getpeername() as per Single Unix Spec (as opposed to POSIX - drafts...). - (start_scan): Ditto for getsockname(). - * backend/net.c (sane_start): Ditto. - - * backend/tamarack.c (TAMARACK_CONFIG_FILE): Delete. - (TAMARACK_CONFIG_FILE): New macro. - Include <sane/sanei_config.h>. - (sane_init): Use sanei_config_open() instead of fopen(). - (read_data): Declare nbytes as size_t---makes a difference - on 64-bit platforms. - -1997-12-07 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/s9036.c (sane_init): Run through "indent -gnu". Use - sanei_config_open() instead of fopen(). Include - <sane/sanei_config.h>. - (read_more_data): Print size_t variables by casting them to - (u_long) and using %lu format (some platforms have size_t as - u_long, others as u_int, which does make a difference if - sizeof(long) > sizeof(int). - (sane_start): Ditto. - Add English translation for comments that were in German only. - - * backend/s9306.c: New file by Ingo Schneider. - * backend/s9306.h: New file by Ingo Schneider. - -1997-12-04 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.c (sane_cancel): Collect child process status - after killing it (avoids accumulating zombie processes). Reported - by Mike Sweet. - * backend/umax.c (sane_cancel): Ditto. - * backend/qcam.c (sane_close): Ditto. - (sane_cancel): Ditto. - -1997-12-03 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.68 released. - -1997-12-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/scanimage.c (window_val_user): New variable. - (fetch_options): Don't overwrite window_val[i] if it's - user-specified. - (main): Set window_val_user[i] as necessary. - - * backend/mustek.c (send_gamma_table): New function. - (sane_start): Send gamma table both before and after start_scan(). - The MFS-06000CX is reported to need the gamma-table before - start_scan() and the Mustek docs do indeed indicate downloading - the gamma-table twice. - (init_options): Make --custom-gamma option active by default (since - gray-scale mode is the default mode). - -1997-11-30 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-mustek.man: Mention MFC-08000CZ. - - * backend/mustek.c (attach): Reduce y_range.max for MFC-08000CZ - from 300 to 292mm as reported by Jeroen Steenblik - <jeroens@esrac.ele.tue.nl>. Ditto for MFC-06000CZ. - -1997-11-28 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/umax-scanner.h (scanner_str): Add "Astra 610S". - (known_scanners): Increment from 13 to 14. - - PP fixes by Andreas Czechanowski: - * backend/mustek.c (EXTRA_SAVE_LINES): New macro. - (fix_line_distance_pp): Use EXTRA_SAVE_LINES instead of hardcoded - constant. Various fixes to make it actually work. - (reader_process): Initialize s->ld_ld_line to zero. - - * backend/mustek.h (struct Mustek_Scanner): Add member ld_line. - -1997-11-26 David Mosberger-Tang <David.Mosberger@acm.org> - - * tools/Makefile.in (.c.o): Add this rule. - - * tools/find-scanner.c: Include sanei_scsi.h and sanei_debug.h - via <> quotes (note ""). - -1997-11-25 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_ab306.c (sanei_ab306_exit): Fix by Andreas - Czechanowski: output 0x00 at port[i].base + 1 instead. - -1997-11-22 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-mustek.man (Model): Clarify that paralell port != printer - port. - - * backend/mustek.c (fix_line_distance_mfs): Add missing SANE_UNFIX() - calls for x_range.max and dpi_range.max. - (fix_line_distance_pp): Correct based on Andreas' feedback. - -1997-11-18 David Mosberger-Tang <David.Mosberger@acm.org> - - * configure.in (CFLAGS): Don't specify -ansi---with older libcs, - it's causing more problems than it's worth. - - * Patch by Jeff Freedman: - - * japi/Sane.c: Limit string length to option size. - - * japi/SaneOption.java: Fix indentation. - (unitString): New function. - - * japi/ImageCanvas.java: New file. - * japi/Jscanimage.java: Ditto. - * japi/ScanIt.java: Ditto. - - * japi/Makefile.in (CLASSES): Mention ScanIt.class and - ImageCanvas.class. - (all): Mention Jscanimage.class. - * japi/Scan.c: Include <string.h>. - (String_length): New function. - -1997-11-16 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.c (scale_update): In recent versions of GTK, - "value_changed" callbacks no longer return a value. Change this - function to type "void" accordingly. - - * sanei/sanei_scsi.c: Declare cam_fd only if USE == - DECUNIX_INTERFACE. - - * sanei/sanei_load_values.c (sanei_load_values): Detect errors - while reading the option name (first call to sanei_w_string()). - Reported by Geoffrey T. Dairiki. - - * sanei/sanei_ab306.c [HAVE_UNISTD_H]: Include <unistd.h>. Fix by - Geoffrey T. Dairiki. - - * lib/alloca.c: Enclose in #ifndef HAVE_ALLOCA bracket. Fix by - Geoffrey T. Dairiki. - - * include/lalloca.h: Declare alloca() as returning void* when - __STDC__ is in effect so declaration matches definition in - lib/alloca.c. Reported by Geoffrey T. Dairiki. - - * frontend/preview.c (update_selection): Set coord[] values to - rounded-to-nearest-int of float values. This avoids the jumping - selection box effect. Fix by Geoffrey T. Dairiki. - - * frontend/gtkglue.c (scale_update): Patch by Geoffrey T. Dairiki - <dairiki@apl.washington.edu>: emit value_changed signal if the - backend changed the value. - - * backend/umax.c: Upgraded to Oliver's latest UMAX version. - - * backend/mustek.c (sane_init): Ignore white space in front of an - option/device-name. - -1997-11-12 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_ab306.c (sanei_ab306_get_io_privilege): - (struct port): Remove member HAVE_IO_PRIVS. - (sanei_ab306_get_io_privilege): Get ioperm()issions independent of - HAVE_IO_PRIVS. - - * backend/mustek.c (do_stop): Always send STOP command before - closing the device. - (dev_read_req_enter): For parallel-port scanner, set *idp to 0. - -1997-11-10 David Mosberger-Tang <David.Mosberger@acm.org> - - Bug reported by Matto Marjanovic <maddog@mir.com>: - - * frontend/gtkglue.c (panel_build): Create button only after we - know the option's value. - (button_new): Add VAL argument and initialize button state to - - correct value before connecting the toggled callback. - - Bugs reported by Petter Reinholdtsen <pere@link.no>: - - * sanei/sanei_config.c (sanei_config_open): Add missing cast to - (char *). - - * sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]: Fix - (u_char) cast to (u_char *). - -1997-11-06 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/qcam.c (init_options): Set the type of OPT_NUM_OPTS to - SANE_TYPE_INT (suggested by Guido Muesch - <odiug@faho.rwth-aachen.de>). - * backend/mustek.c (init_options): Ditto. - -1997-11-04 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/xcam.c (xcam_exit): Protect against recursive - invocation. - (main): Turn on preferences.advanced as no graphical geometry - selection exists right now. - Include <preferences.h>. - preferences: New variable. - (pref_toggle_advanced): New function. - (pref_toggle_tooltips): Ditto. - (build_preferences_menu): Add button to control advanced & tooltips - preferences. - - * doc/sane.tex (subsection{sanecontrol_option}): Make it illegal - for SANE_INFO_RELOAD_OPTIONS to be set needlessly. - - * backend/hp.c (sane_control_option): Only turn on RELOAD_PARAMS - when value changed. - - * backend/qcam.c (sane_control_option): Only turn on - RELOAD_PARAMS when value changed. - - * backend/mustek.c (sane_control_option): Only turn on - RELOAD_OPTIONS and/or RELOAD_PARAMS when value changes. - - * Integrate b&w quickcam fixes by Guido Muesch - <odiug@faho.rwth-aachen.de>: - - * backend/qcam.c (bw_x_range, odd_bw_x_range, bw_y_range, - odd_bw_y_range): New constants. - (sane_open): Disable despeckle, black-level, hue, saturation, - resolution & test options for b&w camera (either not useful or not - supported at this point). - (sane_start): Use QC_MONO_SET_CONTRAST instead of - QC_BW_SET_CONTRAST. - (sane_start): Call qc_reset() for b&w camera to avoid hangs (color - camera doesn't need this and is faster that way). - (sane_start): Multiply undecimated_width by s->val[OPT_DEPTH].w, - not 4. - - * backend/qcam.h: Remove obsolete QC_BW_SET_CONTRAST, - QC_BW_AUTO_ADJUST_OFFSET, QC_BW_GET_OFFSET, and QC_SET_CONTRAST - macros. - -1997-11-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-hp.man (Model): Mention ScanJet IIcx. Johannes Geiger - <J_Geiger@fleury.de> reported it to work fine under OS/2 with - sane-0.66 - - * backend/umax.c: Apply patch by Oliver Rauch that avoid - umax hangs. - -1997-11-01 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.67 released. - - * sanei/sanei_ab306.c: New file. - - * backend/mustek.h (MUSTEK_FLAG_PP): New macro. - (struct Mustek_Scanner): Add members ld.index and ld.lmod3 - for parallel-port scanner line-distance correction. - - * backend/mustek.c (color_seq): Move to global level from - fix_line_distance_normal(). - (fix_line_distance_pp): New function. - (scsi_wait_ready): Renamed from wait_ready(). - (pp_wait_ready): New function. - (dev_wait_ready): Ditto. - (dev_open): Ditto. - (dev_cmd): Ditto. - (dev_req_wait): Ditto. - (dev_read_start): Ditto. - (dev_read_req_enter): Ditto. - (dev_close): Ditto. - (attach): Modify to use dev_open(). Set minimum scan resolution - to 51 dpi for parallel-port scanners. - (scan_area_and_windows): Call dev_cmd() instead of - sanei_scsi_cmd(). - (mode_select): Ditto. - (gamma_correction): Ditto. - (start_scan): Ditto. - (stop_scan): Ditto. - (line_distance): Ditto. - (get_image_status): Ditto. - (backtrack_and_adf): Ditto. - (gamma_correction): Return immediately if custom-gamma is turned - off or if not doing a multibit scan. Add support for sending all - three gamma tables with a single command. - (line_distance): Initialize additional line-distance correction - state needed by parallel-port scanner. - (read_req_enter): Remove. - (send_data): Modify to support parallel-port scanner line-distance - correction. - (reader_process): Require I/O-privilege if dealing with parallel - port scanner and call dev_read_start(). Use dev_read_req_enter() - instead of read_req_enter(), dev_req_wait() instead of - sanei_scsi_req_wait(). - (sane_start): For parallel-port scanner, send gamma table with - a single gamma_correction() call. - - * doc/sane-mustek.man: Update with info regarding parallel port - scanner. - - * backend/dll.c (add_backend): When a backend is present already, - move it to the head of the backend list, so pre-loaded backends - appear in the same order as if they had been loaded dynamically - - * backend/mustek.c (pp_mode_list): New constant. - - * backend/mustek.c (init_options): Use pp_mode_list for parallel - port type scanners (no color lineart/halftone modes). - - * sanei/sanei_codec_ascii.c (ascii_w_string): free(*s) only if *s - is non-NULL (reported by Geoffrey T. Dairiki - <dairiki@apl.washington.edu>). - - * backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for - MFS-12000SP with firmware 1.02 or newer. Reported by Henning - Busacker <henning.busacker@Duesseldorf.netsurf.de>. - -1997-10-25 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane.tex (chapter{Contact Information}): Update mailing list - and home page address. - - * backend/dll.c: Include <sane/sanei_config.h>. Call - sanei_config_open() instead of fopen(). - * backend/hp.c: Ditto. - * backend/mustek.c: Ditto. - * backend/net.c: Ditto. - * backend/pint.c: Ditto. - * backend/qcam.c: Ditto. - * backend/umax.c: Ditto. - - * backend/Makefile.in (EXTRA): Mention ../sanei/sanei_config.lo. - - * doc/sane-dll.man: Document SANE_CONFIG_DIR. - * doc/sane-hp.man: Ditto. - * doc/sane-mustek.man: Ditto. - * doc/sane-net.man: Ditto. - * doc/sane-pint.man: Ditto. - * doc/sane-qcam.man: Ditto. - * doc/sane-scsi.man: Ditto. - * doc/sane-umax.man: Ditto. - * doc/saned.man: Ditto. - - * backend/microtek.c: Updated with v0.3 from Matt. - Include <sane/sanei_config.h> - (MICROTEK_CONFIG_FILE): Define as "microtek.conf". - (PATH_MICROTEK_CONFIG): Delete. - (sane_init): Replace fopen() with sanei_config_open(). - - * backend/microtek.h: Ditto. - -1997-10-24 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_config.c (sanei_config_open): Add multiple-directory - support for SANE_CONFIG_DIR. - - * sanei/sanei_config.c: New file by Jeff Freedman. - * include/sane/sanei_config.h: Ditto. - -1997-10-23 David Mosberger-Tang <David.Mosberger@acm.org> - - * Fixes for OS/2 by Jeff Freedman: - * frontend/Makefile.in (SBINPROGS): Set to @SANED@. - * configure.os2 (LN_S): Add --sysconfdir=. - * configure.in: Set up SANED depending on <sys/socket.h>. - * backend/Makefile.in (EXTRA): Mention usleep.lo and strndup.lo. - * backend/pnm.c (rgblength, rgbbuf, rgbleftover): Declare as - static. - * ltconfig: Upgrade to 1.0d. - * ltmain.sh: Ditto. - * sanei/sanei_constrain_value.c: Include <sane/config.h>. - -1997-10-22 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.h (struct GSGDialog): Remove idle_id member. - - * frontend/gtkglue.c (idle_handler): Remove. GTK's reference - counting appears to have been fixed (?). - - * backend/umax_scanner.h: Update with Oliver's latest version. - * backend/umax-scsi.c: Ditto. - * backend/umax-scsidef.h: Ditto. - * backend/umax-struct.h: Ditto. - * backend/umax.c: Ditto. - * backend/umax.h: Ditto. - -1997-10-18 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_scsi.c (sanei_scsi_req_enter): Set cdb.hdr.pack_id - to unique id number. - -1997-10-17 David Mosberger-Tang <David.Mosberger@acm.org> - - * japi/Makefile.in: New file (by Jeff Freedman <jsf@hevanet.com>). - * japi/README.JAVA: Ditto. - * japi/Sane.c: Ditto. - * japi/Sane.java: Ditto. - * japi/SaneDevice.java: Ditto. - * japi/SaneOption.java: Ditto. - * japi/SaneParameters.java: Ditto. - * japi/SaneRange.java: Ditto. - * japi/Test.java: Ditto. - - * configure.in (AC_OUTPUT): Mention japi/Makefile. - - * sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]: - Add data buffer alignment fix by Michael Sweet. - -1997-10-24 Jeff Freedman <jsf@hevanet.com> - - * sanei_open_config() added. Backends call it to open .conf files. - -1997-10-14 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.66 released. - - * README: Update with new URLs and latest GIMP/GTK info. - -1997-10-11 David Mosberger-Tang <David.Mosberger@acm.org> - - * include/sane/saneopts.h: Add #defines for TEN_BIT_MODE, WARMUP, - RGB_PREVIEW_PATCH, and START_SCAN_PATCH. - - * README: Remove umax-specific configure options (they're now - runtime options). - * configure.in (CPPFLAGS): Ditto. - * include/sane/config.h.in: Ditto. - - * backend/epson.c: Updated - -1997-10-09 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/umax.c (sane_exit): Remove bogus call to free() - (reported by Peter). - -Thu Oct 9 20:20:32 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp> - - * epson.c (sane_start): Fix lcount computation. - -Thu Oct 9 11:44:03 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp> - * epson.c (sane_start): Use byte-interleaved mode if available. - (sane_start): Set line counter for byte-interleaved mode. - (sane_read): Handle byte-interleaved mode. - (sane_init) [PACKAGE && VERSION]: Debug out PACKAGE and VERSION. - -Tue Oct 7 18:44:36 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp> - - * epson.c (set_lcount): New function. - (sane_start): Use block mode for monochrome if available. - (sane_read): Handle block mode. - - * epson.h (struct Epson_Scanner): Add block. - -Tue Oct 7 15:48:11 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp> - - * epson.c (set_speed): New function. - (sane_start): Use set_speed. - -Tue Oct 7 15:44:33 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp> - - * README: Add info about a mailing list. - - * Makefile.am (libsane_epsonx_la_LDFLAGS): Increment the revision. - - * epson.c (identify): Debug output the command level. - -1997-10-08 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/mustek.conf: Turn on linedistance-fix and lineart-fix by - default. - - * include/sane/config.h.in: Remove - NEED_MUSTEK_LINE_DISTANCE_WORKAROUND. - - * doc/sane-mustek.man (CONFIGURATION): Document option - linedistance-fix and lineart-fix. - - * configure.in: Remove test for --enable-ld-fix. - - * backend/mustek.h (MUSTEK_FLAG_LD_FIX): New flag. - (MUSTEK_FLAG_LINEART_FIX): Ditto. - - * backend/mustek.c (line_distance): Replace - NEED_MUSTEK_LINE_DISTANCE_WORKAROUND with runtime test for same. - (reader_process): If MUSTEK_FLAG_LINEART_FIX is on, delay 200ms - when scanning in lineart mode. - (sane_init): New variable. Add linedistance-fix and lineart-fix - support. - - * backend/Makefile.in (install): Fix install rule so all symlinks - necessary for libsane.so are installed. - - * backend/dll.c (load): Change from LIBNAME to LIBPATH (as per - libtool-1.0c documention). - - * sanei/sanei_scsi.c (issue): Declare `static'. - - * aclocal.m4: Update with contents of libtool.m4. - - * configure.in (AC_PROG_RANLIB): Remove (once again!). - - * config.guess: Update from libtool-1.0c. - * config.sub: Ditto. - * ltconfig: Ditto. - * ltmain.sh: Ditto. - - * backend/epson.c: Update with Kazuhiro's latest epson version - (1.1.6). - -1997-10-07 David Mosberger-Tang <David.Mosberger@acm.org> - - * frontend/gtkglue.c (panel_destroy): Clear elem->menu after - freeing it (reported by Kazuhiro Sasayama <kaz@hypercore.co.jp>). - -1997-10-06 David Mosberger-Tang <David.Mosberger@acm.org> - - * backend/epson.c: Updated with Kazuhiro Sasayama - <kaz@hypercore.co.jp> latest version (1.1.5). - -1997-10-04 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.65 released. - - * sanei/sanei_scsi.c (close_aspi): Rename from sanei_close_aspi (static - functions don't need ugly sanei_ prefix...). - (open_aspi): Ditto. - - * configure.os2: New file (from Jeff's config.os2). - - * backend/umax-scsi.c: Mmove include of <scsi/scsi.h> and - <scsi/sg.h> into !def UMAX_TO_SANE bracket. - - * backend/pnm.c (getparmfromfile): Open with mode "rb" to get - binary file on platforms where this is meaningful. - -1997-10-02 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-epson.man: Mention that backend is known to work with - GT-5000. - -1997-10-01 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-epson.man: New file (based on Kzuhiro's README file). - - * backend/Makefile.in (PRELOADABLE_BACKENDS): Mention epson. - (libsane-epson.la): Add dependencies for Epson backend. - - * backend/epson.c: New file by Kazuhiro Sasayama - <kaz@hypercore.co.jp>. - * backend/epson.h: Ditto. - - * backend/microtek.c: Updated with latest version from - http://www.mir.com/mtek/ by Matt Marjanovic <maddog@mir.com>. - * backend/microtek.h: Ditto. - -1997-10-3 Jeff Freedman <jsf@hevanet.com> - - * sanei/sanei_scsi.c: Minor fixes for OS/2 support. - - * configure.in: Check for presence of sys/socket.h to set @NET@. - - * backend/Makefile.in: net -> @NET@ - -1997-09-30 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman: - (OS2_INTERFACE) Define. - (open_aspi,close_aspi): New OS/2-specific functions. - (sanei_scsi_open): Add OS/2 support. - [USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd(). - (sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]: - Return proper value. - - * include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add - #undef. If !HAVE_STRNCASECMP, define strncasecmp macro as - alias for strnicmp. - - * configure.in (AC_CHECK_FUNCS): Check for strncasecmp(). - (AC_CHECK_HEADERS): Check for os2.h. - -1997-09-30 David Mosberger-Tang <David.Mosberger@acm.org> - - * sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman: - (OS2_INTERFACE) Define. - (open_aspi,close_aspi): New OS/2-specific functions. - (sanei_scsi_open): Add OS/2 support. - [USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd(). - (sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]: - Return proper value. - - * include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add - #undef. If !HAVE_STRNCASECMP, define strncasecmp macro as - alias for strnicmp. - - * configure.in (AC_CHECK_FUNCS): Check for strncasecmp(). - (AC_CHECK_HEADERS): Check for os2.h. - -1997-09-24 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.64 released. - - * PROJECTS (Backend): Update microtek entry. - Add entry for sgivl. - - * backend/microtek.conf: New file. - - * backend/dll.conf: Mention microtek. - - * backend/Makefile.in (PRELOADABLE_BACKENDS): Mention microtek. - (libsane-microtek.la): Mention microtek dependencies. - - * backend/microtek.c: New file by Matthew Marjanovic. - * backend/microtek.h: Ditto. - -1997-09-23 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Integrate Michael Sweet's - latest Irix implementation of sanei_scsi_cmd(). - -Sat Sep 6 08:59:24 1997 David Mosberger-Tang <David.Mosberger@acm.org> - - * Version 0.63 released. - - * configure.in (V_MINOR): Bump up to 63. - - * configure.in (AM_PROG_RANLIB): Go back to AC_PROG_RANLIB. The - former causes a bad configure script. - -Fri Aug 29 16:08:05 1997 David Mosberger-Tang <David.Mosberger@acm.org> - - * doc/sane-umax.man: Change status of "Astra 1200S" to "all modes ok" - as Oliver tells me that this has been tested and is working now. - -Wed Aug 20 17:23:04 1997 David Mosberger-Tang <David.Mosberger@acm.org> - - * sane-0.63.lsm: Update email addresses etc. - - Integrate Oliver Rauch's UMAX improvements: - - * README: Document --enable-umax-preview-fix, - --enable-umax-start-scan-fix. - - * configure.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH): Define if - necessary. - - * include/sane/config.h.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH): - Add #undef. - - * include/sane/saneopts.h: Add manifest constants for options - resolution-bind, negative, quality-cal, threshold, analog-gamma, - analog-gamma-r, analog-gamma-g, analog-gamma-b, analog-gamma-bind, - smear, white-bind, black-bind. - - * AUTHORS (Frontends): Update email addresses of Oliver Rauch and - myself. - -1997-08-07 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (attach): Print Mustek scanner info at - debug level 2, not 3. - -1997-08-06 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Make conditional - on #ifdef __alpha__ (Michael Sweet reports that the old code broke - SGI IRIX 6.3). - -1998-08-01 David Mosberger-Tang <davidm@azstarnet.com> - - * include/sane/config.h.in (HAVE_SYS_SCSICMD_H, HAVE_SYS_DSREQ_H): - Undefine. - - * configure.in (AC_CHECK_HEADERS): Mention sys/scsicmd.h and - sys/dsreq.h. - - * sanei/sanei_scsi.c (SCO_OS55_INTERFACE, IRIX_INTERFACE, - SOLARIS_INTERFACE): Define. - -1997-07-27 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscanimage.c (quit_xscan) [HAVE_LIBGIMP_GIMP_H]: When - running as a GIMP extension, call gimp_quit(). - (init) [HAVE_LIBGIMP_GIMP_H]: Set GDK's xshm flag based on GIMP's - flag. - - * doc/sane-mustek.man (SCSI ADAPTER TIPS): Try to make complete - sentences. - -1997-07-25 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.62 released. - - * configure.in (CPPFLAGS): Test for gtk_gamma_curve_new() to - see whether appropriate version of gtk is installed. - - * backend/mustek.c (sane_init): Add parsing support for option - `strip-height'. - (strip_height): New variable to limit scan strip height. - (reader_process): If strip_height is greater than 0.0, limit - lines_per_buffer so that no more than strip_height inches are - scanned with a single SCSI read command. - - * doc/sane-mustek.man (CONFIGURATION): Describe strip-height - option. - -1997-07-23 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane-hp.man (Model): Added ScanJet 3c info. - -1997-07-22 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/scanimage.README: Remove file. - - * doc/sane-scsi.man: Add info on generic AM53C974 driver. - -1997-07-19 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c [USE == LINUX_INTERFACE]: Include - <sys/time.h>. - -1997-07-18 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_req_flush_all) - [WE_HAVE_ASYNC_SCSI]: Implement stub. - - * scripts/xerox: New file (simple xeroxing script). - - * frontend/scanimage.c (main): When opening a device fails, also - print reason for failure. - - * frontend/preview.c (preview_new): Register expose_event handler. - (preview_destroy): Call scan_done() if called when preview - scanning in progress. - - * backend/mustek.c (attach): Add argument MAY_WAIT. If it's TRUE, - wait for scanner to become ready before sending inquiry command. - (do_cancel): Rename to do_stop. Ignore child's exist status - when we're really cancelling a scan. Issue stop_scan() command - only if the scan got cancelled and do a wait_ready() before - issueing the stop_scan(). - (read_data): Delete. - (sane_init): Call attach() with MAY_WAIT set to SANE_FALSE. - (sane_open): Call attach() with MAY_WAIT set to SANE_TRUE. - - * frontend/preview.c (display_partial_image): Use gtk_preview_put() - to update the preview window. Much faster than hiding/showing the - widget. - (expose_handler): New function. - - * frontend/progress.c (progress_new): Make "Cancel" button a - toggle-button so user can see when it was pressed down while - the backend cancels its operation. - - * backend/mustek.c (do_cancel): Call wait_ready() before - attempting to stop scanner. - (read_req_enter): New function. - (send_data): Ditto. - (sigterm_handler): New function. - (reader_process): Reimplement using asynchronous SCSI command - interface. - (wait_ready): Use gettimeofday() to implement timeout. The - scsi command itself may take a considerable amount of time - (1 second or more) so we can't just loop for a fixed number - of times. - - * include/sane/sanei_scsi.h: Declre sanei_scsi_req_enter, - sanei_scsi_req_wait, and sanei_scsi_req_flush_all. - - * sanei/sanei_scsi.c [WE_HAVE_ASYNC_SCSI]: Define. - (issue): New function. - (sanei_scsi_req_flush_all): New function. - (sanei_scsi_req_enter): Ditto. - (sanei_scsi_req_wait): Ditto. - (sanei_scsi_cmd): Reimplement in terms of enter/wait. - (sanei_scsi_req_enter) [!WE_HAVE_ASYNC_SCSI]: Stub that - simply calls sanei_scsi_cmd(). - (sanei_scsi_req_wait): Empty stub. - -1997-07-16 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane-scsi.man: Add Tekram DC390 info (contributed by - kawk@Home.Yo.COM (Kolja Waschk)) - -1997-07-15 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_cmd) [USE==LINUX_INTERFACE]: - Return SANE_STATUS_NO_MEM if write() of SCSI command fails. - - * backend/mustek.c (do_cancel): If reader_process exited, use - exit status as return value. - (reader_process): Return SANE_STATUS_IO_ERROR instead of 1. - Return SANE_STATUS_NO_MEM instead of 2. Return STATUS instead - of 3. Return SANE_STATUS_GOOD instead of 0. - (sane_read): If do_cancel() returns anything but - SANE_STATUS_CANCELLED or SANE_STATUS_GOOD, something bad has - happened and the return status should be returned. - - * doc/sane-scsi.man: Fix typo: sg.h is in /usr/include/scsi, not - /usr/include. - - * PROBLEMS: Add warning about updating Linux kernel after increasing - SG_BIG_BUFF. - -1997-07-14 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscanimage.c (quit_xscan): Destroy preview window before - quitting, so preview image gets saved if necessary. - - * frontend/Makefile.in (LIBX11): New macro. - (LIBGTK): Ditto. - (xscanimage): Use $(LIBGTK) instead of $(LIBS). - (xcam): Use $(LIBGTK) instead of $(LIBS). - - * configure.in (LIBX11): Define as all libraries necessary when - using X11. - (LIBGTK): Define as all libraries necessary when using GTK+. - - * backend/mustek.c (sane_start): Don't send gamma in lineart and - halftone mode! - - * doc/sane-scsi.man: Add info on how to setup BT958 card (contributed - by Jeremy <jeremy@xxedgexx.com>). - -1997-07-13 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane-scsi.man: Add info on FreeBSD. - -1997-07-12 David Mosberger-Tang <davidm@azstarnet.com> - - * ltmain.sh: Installed libtool-1.0-nomode patch. - - * configure.in (AC_PROG_RANLIB): Change to AM_PROG_RANLIB. - -1997-07-11 David Mosberger-Tang <davidm@azstarnet.com> - - * ltmain.sh: Upgrade to libtool-1.0. - * ltconfig: Ditto. - * config.guess: Ditto. - * config.sub: Ditto. - * aclocal.m4: Ditto. - -1997-07-08 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.61 released. - - * backend/Makefile.in (LIBLIB_FUNCS): Mention snprintf. - - * backend/umax-struct.h (LINEART, HALFTONE, GREYSCALE, RGB): Move - the pound sign to the beginning of the line. - * backend/umax-scsidef.h: Ditto for all indendent #defines in this - file. - * backend/umax-scsi.c: Ditto for all # directives in here. - - * frontend/saned.c [HAVE_LIBC_H]: Include <libc.h>. - -1997-07-07 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/net.c [HAVE_LIBC_H]: Include <libc.h>. - - * lib/usleep.c: New file (adapted from glibc). - - * lib/strndup.c: Move #ifndef HAVE_STRNDUP up so nothing - except <config.h> gets included unless really needed. - Include <sys/types.h> to get size_t defined. - - * lib/snprintf.c (vsnprintf): Rename from vplp_snprintf. - (snprintf): Rename from plp_snprintf. - - * include/sane/config.h.in: Add #undef HAVE_USLEEP. Add #undef - HAVE_IO_CAM_CAM_H. - - * configure.in: Test ${ac_cv_prog_gcc} instead of $CC to find out - whether we're dealing with gcc. Test for io/cam/cam.h header. - (AC_C_INLINE): Add. - (AC_CHECK_FUNCS): Mention usleep. - Check for Xext after checking for X11 since on some platforms, - linking against Xext requires functions from X11. - - * backend/umax.c (PATH_MAX): Define as 1024 if undefined. - - * backend/Makefile.in (CONFIGS): Don't add $(srcdir) prefix. - (LIBLIB_FUNCS): Mention usleep. - (install): Invoke $(LIBTOOL) $(MINST) --finish $(libdir) in - a final step. Correct installation rule for config files. - -1997-07-06 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_cmd): New variable RESULT. - -1997-07-05 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Improve BSD version based - on patch by Amancio Hasty <hasty@rah.star-gate.com>. - (BSD_INTERFACE): Rename from NETBSD_INTERFACE (FreeBSD uses the - same interface). - - * configure.in (CPPFLAGS): Check for scsireq_enter in libscsi.a. - - * doc/Makefile.in (SECT5): Mention sane-scsi.5. - * doc/sane-scsi.man: New file. - - * doc/sane-umax.man: Add SEE ALSO section mentioning sane-scsi(5). - * doc/sane-mustek.man: Ditto. - - * doc/scanimage.man: Mention sane-umax(5). - * doc/xscanimage.man: Ditto. - * doc/saned.man: Ditto. - - * configure.in (AC_TYPE_PID_T): Add. - * include/sane/config.h.in: Add undef of pid_t. - -1997-07-04 David Mosberger-Tang <davidm@azstarnet.com> - - * lib/sigprocmask.c (sigprocmask): Use hardcoded values instead - of SIG_BLOCK, SIG_UNBLOCK, and SIG_SETPROCMASK. - -1997-07-03 David Mosberger-Tang <davidm@azstarnet.com> - - * configure.in (CPPFLAGS): Remove -D_POSIX_SOURCE. We can't define - it safely since it causes select() related typedefs and defines - to go away under FreeBSD, for example. - -1997-07-02 David Mosberger-Tang <davidm@azstarnet.com> - - * configure.in (CPPFLAGS): Put -D_GNU_SOURCE and -D_POSIX_SOURCE - in CPPFLAGS, not CFLAGS. - - * doc/sane-umax.man: Change SG_BIG_BUFF example from 128KB to - 127.5KB. - * doc/sane-mustek.man: Ditto. Mention DTC3181E together with - DTCT436. - - * frontend/gtkglue.c (gsg_create_dialog): Initialize dialog->advanced - to TRUE so "dumb" frontends will show all options. - - * frontend/xscanimage.c (device_dialog): Turn off advanced options - by default. - - * configure.in (AC_CHECK_TYPE): Check for u_long and u_int. - Check for scsireq_t. - * sanei/sanei_scsi.c: Don't define scsireq_t here. - - * include/sane/config.h.in: Add undef of u_long, u_int, and - scsireq_t. - -1997-07-01 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscanimage.c (quit_xscan): No longer call - preview_destroy() since that now gets called as part of - the "destroy" callback. - - * backend/hp.c (attach) [PREFER_DEVICEPIXEL]: Use device-pixel - unit commands instead of decipoint commands so things work on a 5p - as well (contributed by NOGAYA Shigeki - <nogaya@mbox.kyoto-inet.or.jp>). - (sane_start) [PREFER_DEVICEPIXEL]: Convert from mm to pixels. - - * frontend/preview.c (input_available): Break out of per-bit loop - when done with one line (fix contributed by NOGAYA Shigeki - <nogaya@mbox.kyoto-inet.or.jp>). - * frontend/xscanimage.c (input_available): Ditto. - - * doc/sane-umax.man: Rename SCSI id to Product id to reduce - confusion. - * doc/sane-hp.man: Ditto. - * doc/sane-mustek.man: Ditto. - - * backend/mustek.c (wait_ready): Ignore errors during wait_ready(). - With 3-pass scanners, ncr810 driver returns EIO while the scanner - is getting ready for pass 2 or 3. - -1997-06-30 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sense_handler): Print debug info if we - find unknown sense result. - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Consider sense_buffer[] - only when result != 0. - - * frontend/scanimage.c (sighandler): Change return value type - from void to RETSIGTYPE (from <sane/config.h>). - - * doc/sane-mustek.man: Mention problems with MSFS-12000SP. - - * backend/umax.c (sane_start): Don't use C++ style line comments. - - * backend/umax-scsi.c (umax_do_scsi_cmd): Use sigemptyset() to clear - out signal set. Include <sane/config.h>. - - * frontend/saned.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>. - * include/sane/config.h.in: Mention HAVE_SYS_SELECT_H. - -Thu Jun 26 10:19:50 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * README: Mention permissions on generic SCSI device. - -Tue Jun 24 17:35:52 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/xscanimage.man: Fix spacing. - - * doc/sane-dll.man: Mention how list of pre-loaded backends - can be changed. - -Sun Jun 22 08:29:47 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * PROBLEMS: Add note on SCSI device names under OpenStep. - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Fix various minor bugs. - (sanei_scsi_open): Add support for OpenStep. - - * backend/Makefile.in (install): Replace 'ln -f -s' with `rm -f', - `ln -s' sequence. OpenStep doesn't support the -f option at all. - -Fri Jun 20 07:30:18 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane-qcam.man: Updated B&W status. - - * sanei/sanei_save_values.c [HAVE_LIBC_H]: Include <libc.h>. - * sanei/sanei_load_values.c: Ditto. - - * lib/sigprocmask.c: New file. - * lib/strdup.c: Ditto. - - * lib/Makefile.in (LIBLIB_OBJS): Mention strdup.o and sigprocmask.o. - (LIBLIB_LTOBJS): Mention strdup.lo and sigprocmask.lo. - (liblib.a): Use $(RANLIB) instead of -ranlib. - - * include/sane/sanei_backend.h [!HAVE_SIGPROCMASK]: Define - compatibility macros sigset_t, sigemptyset(), sigfillset(), - sigaddset(), sigdelset(), and sigaction(). - Define macro SIGACTION. - - * frontend/saned.c (HAVE_VARARG_MACROS): Don't define unless we - have at least gcc 2.6. - * include/sane/sanei_debug.h Ditto. Use HAVE_VARARG_MACROS - instead of __GNUC__. - * sanei/sanei_init_debug.c: Ditto. - - * configure.in (AC_PROG_RANLIB): Mention. - (CFLAGS): Move up near the beginning and add -D_POSIX_SOURCE. - (AC_CHECK_HEADERS): Test for libc.h. - (AC_TYPE_SIGNAL): Mention. - (AC_CHECK_FUNCS): Check for sigprocmask. - - * backend/net.c (sane_init): Honor SANE_NET_HOSTS even if - net.conf does not exist. - - * backend/mustek.c (sane_start): Use "struct SIGACTION" so it's - easier to make code work on platforms that don't support - sigprocmask(). - * backend/umax.c (sane_start): Ditto. - - * ltmain.sh: Upgrade to libtool-0.9h. - * ltconfig: Ditto. - * config.guess: Ditto. - * config.sub: Ditto. - * aclocal.m4: Ditto. - -Thu Jun 19 08:26:33 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * configure.in (V_MINOR): Update forgotten version number... - - * backend/qcam.c (reader_process): Scale 4 and 6 bpp to 8 bpp. - - * backend/mustek.h (MUSTEK_FLAG_LD_NONE): New flag. - * backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for - MSF-06000SP (this fixes the problems for Andreas Gaumann - <gg261@appl2.hrz.uni-siegen.de>). - (attach): Print debug message when MUSTEK_FLAG_LD_NONE is on. - (line_distance): Fix up ld correction only if MUSTEK_FLAG_LD_NONE - is not on. - -Wed Jun 18 15:42:25 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (section{Image Data Format}}): Clarify - what valid bit-depths are. - -Tue Jun 17 07:47:51 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (sane_get_parameters): Test for != QC_COLOR - instead of == QC_MONO. Apparently, there are several versions - of the monochrome camera. - (qc_setscanmode): Ditto. - - * lib/snprintf.c: Update with latest version (also includes - license information now). - - * sane-0.6.lsm (Author): Update Tristan Tarrant's email address. - * AUTHORS: Ditto. - * frontend/xscanimage.c: Ditto. - -Sun Jun 15 10:08:44 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/xscanimage.man: Add section on how to run xscanimage under - the GIMP. - - * frontend/xscanimage.c (init) [HAVE_LIBGIMP_GIMP_H]: Call - gtk_rc_parse() with gimp_gtk_rc() to get space-saving layout of - The GIMP. (Suggested by Sven Neumann.) - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Add NeXTStep/OpenStep - implementation. - (sanei_scsi_cmd): Adjust NetBSD version to make it more like - NeXTStep/OpenStep version. - - * configure.in (AC_CHECK_HEADERS): Mention bsd/dev/scsireg.h. - -Thu Jun 19 15:19:38 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * backend/umax-scsi.c: Parameterize slightly more so that the - build succeeds on non-Linux platforms. - - * Makefile.in, backend/Makefile.in, doc/Makefile.in, - frontend/Makefile.in (install): Fail immediately if any - installation fails. Use mkinstalldirs to create all installation - directories. - -Sat Jun 14 11:07:13 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.6 released. - - * frontend/preview.c (preview_new): Connect "destroy" signal - so we notice if window manager closes our window. - (top_destroyed): New function. - - * frontend/xscanimage.c (scan_preview): Make it robust against - preview_new() returning NULL and connect "destroy" signal so we - notice when the window manager closes the preview window. - (preview_window_destroyed): New function. - - * LICENSE: New file. - - * backend/dll.c: Change license from GPL to relaxed GPL. - * backend/hp.c: Ditto. - * backend/hp.h: Ditto. - * backend/mustek.c: Ditto. - * backend/mustek.h: Ditto. - * backend/net.c: Ditto. - * backend/net.h: Ditto. - * backend/pint.c: Ditto. - * backend/pint.h: Ditto. - * backend/pnm.c: Ditto. - * backend/pnm.h: Ditto. - * backend/qcam.c: Ditto. - * backend/qcam.h: Ditto. - * sanei/sanei_codec_ascii.c: Ditto. - * sanei/sanei_codec_bin.c: Ditto. - * sanei/sanei_constrain_value.c: Ditto. - * sanei/sanei_init_debug.c: Ditto. - * sanei/sanei_load_values.c: Ditto. - * sanei/sanei_net.c: Ditto. - * sanei/sanei_save_valus.c: Ditto. - * sanei/sanei_scsi.c: Ditto. - * sanei/sanei_wire.c: Ditto. - -Fri Jun 13 18:35:47 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * lib/snprintf.c: New file (Patrick Powell). - - * frontend/xcam.c: Use guint32 and guint32 instead of u_int16_t - and u_int32_t (Tristan Tarrant). - - * doc/Makefile.in (SECT5): Mention sane-umax.5. - - * configure.in (PACKAGE_VERSION): Check for snprintf (Tristan - Tarrant). - - * backend/dll.conf: Mention umax. - - * backend/umax-scanner.h: New file (from umax-0.5.5). - * backend/umax-scsi.c: Ditto. - * backend/umax-scsidef.h: Ditto. - * backend/umax-struct.h: Ditto. - * backend/umax-uc630.h: Ditto. - * backend/umax-ug630.h: Ditto. - * backend/umax-umax.c: Ditto. - * backend/umax.conf: Ditto. - * backend/umax.h: Ditto. - * doc/sane-umax.5: Ditto. - - * backend/Makefile.in (PRELOADABLE_BACKENDS): Mention umax. - (libsane-umax.la): List dependencies for umax library. - - * COPYING: New file. - - * include/sane/config.h.in: Add #undef HAVE_SNPRINTF. - -Tue Jun 10 21:00:34 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * ltmain.sh: Upgrade to libtool-0.9g. - -Sun Jun 8 21:24:27 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/dll.c (load): Also check SHLIB_PATH (HP-UX) and LIBPATH - (AIX). - - * include/sane/config.h.in: Remove HAVE_GTK_GTKCURVE_H. - -Sat Jun 7 11:19:57 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscanimage.c (pref_device_save): Call gsg_sync() before - saving the values. - - * backend/Makefile.in (libsane-%.la): Add -export-dynamic flag. - - * frontend/xscanimage.c (query): Rename "/Extensions/" to "/Xtns/" - to reflect gimp-0.99.10 changes. - (query): Don't put in separator---it confuses gimp. - (main): Temporarily install a null print handler so gimp_main() - doesn't produce any ugly messages when program gets invoked in - stand-alone mode. - - * ltconfig: Upgrade libtool to version 0.9f. - * ltmain.sh: Ditto. - * config.guess: Ditto. - * config.sub: Ditto. - - * frontend/Makefile.in (install): Define MKDIR as - $(top_srcdir)/mkinstallldirs. - Use $(MKDIR) instead of mkdir. - * backend/Makefile.in (install): Ditto. - * doc/Makefile.in (install): Ditto. - - * mkinstalldirs: New file (from maint-0.1g). - -Tue Jun 3 10:29:17 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * LEVEL2: New file. - -Sun Jun 1 13:26:40 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/Makefile.in (LATEX, DLH): New macros. - (sane.ind): Prefix source filename with $(srcdir). - (ps): Ditto. - (html): Ditto. - - * doc/net.tex (subsection{SANE_NET_START}): Document member - byte_order. - - * sanei/sanei_net.c (sanei_w_start_reply): (De-)code BYTE_ORDER - member. - - * frontend/saned.c (byte_order): New union. - (process_request): Initialize byte_order member. - - * include/sane/sanei_net.h (SANE_Net_Byte_Order): New enum type. - (SANE_Start_Reply): New member BYTE_ORDER. - -Wed May 28 17:13:43 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/Makefile.in (install): Create $(mandir)/man1 and - $(mandir)/man5 if necessary. - -Tue May 27 09:31:39 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/hp.c: Remove s7_range and s1_range. - (attach): Add inquiry of min/max brightness/contrast and fill in - dev->brightness_range and dev->contrast_range accordingly. - (init_options): Use s->hw->brightness_range instead of s7_range. - Use s->hw->contrast_range instead of s7_range. Disable contrast - option if min value is same as max value. - - * backend/hp.h (struct HP_Device): Add members BRIGHTNESS_RANGE - and CONTRAST_RANGE. - - * sanei/sanei_scsi.c (sanei_scsi_open): Add more debug info. - -Mon May 26 10:43:51 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir, - and top_builddir. - (INCLUDES): Move -I directives from CPPFLAGS to this macro. Also - search in $(srcdir), $(top_builddir)/include, and - $(top_srcdir)/include. - - * lib/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir, - and top_builddir. - (INCLUDES): Move -I directives from CPPFLAGS to this macro. Also - search in $(srcdir), $(top_builddir)/include, and - $(top_srcdir)/include. - - * include/Makefile.in: New file. - - * frontend/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir, - and top_builddir. - (INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and - $(top_srcdir)/include. - (install): Add $(srcdir) prefix to sane-style.rc. - - * doc/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir, - and top_builddir. - (%.1 %.5): Use $^ instead of $* so source file can be found even - when in a different directory. - - * configure.in (AC_OUTPUT): Create (dummy) include/Makefile to - ensure include directory exists in build tree. - - * backend/Makefile.in: Add definitions for VPATH, srcdir, - top_srcdir, and top_builddir. - (INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and - $(top_srcdir)/include. - (CONFIGS): Add $(srcdir) prefix. - (%-s.c): Ditto. - - * Makefile.in (INSTALLED_INCLUDES): Mention include/sane/config.h. - Add definitions for VPATH, srcdir, top_srcdir, and top_builddir. - (INSTALLED_INCLUDES): Change include/sane to $(top_srcdir)/include/sane - and use "addprefix" function to add prefix. - -Thu May 15 07:26:06 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane-mustek.man (Model): Add entry for MFC-600CD. - (Model): Mention AHA-2940. - - * frontend/xscanimage.c (scan_dialog): Move gsg_sync() to here - (from scan_start()). - - * backend/mustek.c (init_options): Disable brightness/contrast for - 1-pass scanners only (in color mode). - -Wed May 14 09:17:02 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c: Add ax_brightness_range, ax_contrast_range. - (init_options): Use ax_brightness_range/ax_contrast_range for - brightness/contrast option when using a 3-pass scanner. - (encode_percentage): Remove extraneous division by 100.0. - - * doc/sane-mustek.man (Model): Add MFS-12000CX entry. - -Mon May 12 07:58:34 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/scanimage.c (main): Shorten help string so it fits in - 80 characters. - - * frontend/preview.c (paint_image): Only increment height if - height < p->image_height. - -Sat May 10 14:43:05 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.57 released. - - * backend/mustek.c (attach): Fix range to 220x300mm. - (init_options): Initialize OPT_PREVIEW and OPT_GRAY_PREVIEW. - (sane_control_option): Handle OPT_PREVIEW and OPT_GRAY_PREVIEW. - Do not allow OPT_NUM_OPTS to be set. - (sane_get_parameters): Except for s->params.format and - s->params.last_frame, do not change any parameters when scanning - is in progress. - (sane_start): Handle mono-chrome previewing. - - * backend/mustek.h (Mustek_Option): Add OPT_PREVIEW and - OPT_GRAY_PREVIEW. - - * frontend/progress.c (progress_new): Fix position of progress bar - window to (progress_x,progress_y). - - * frontend/gtkglue.c (panel_build): Skip Preview option. - -Thu May 8 19:39:48 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/scanimage.man: New file. - - * doc/Makefile.in (SECT1): Mention scanimage.1. - - * backend/dll.conf: Add hp to dll.conf. - -Wed May 7 07:28:18 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): New type. - (sanei_scsi_close): Add SENSE_HANDLER argument (NULL means no - special handler needed). - - * backend/hp.c (sane_start): Pass 0 as SENSE_HANDLER argument. - (attach): Ditto. - - * backend/mustek.c (sense_handler): Rename from request_sense and - simplify. - Remove all explicit request-sense calls. - - * sanei/sanei_scsi.c: Include <stdlib.h>. - (num_handlers_alloced): New variable. - (sense_handler): Ditto. - (sanei_scsi_open): Add SENSE_HANDLER argument. Stash it away in - SENSE_HANDLER array if non-NULL. - (sanei_scsi_cmd) [HAVE_SYS_SG]: Invoke SENSE_HANDLER[FD] if it - exists and is non-NULL and we have a valid sense-buffer. - (sanei_scsi_cmd) [HAVE_SYS_SCSI]: Ditto. - (sanei_scsi_close): Reset SENSE_HANDLER[FD] to NULL if it exists. - - * frontend/xcam.c: Include <sane/config.h>. - - * configure.in: Add a big fat warning that PROBLEMS should be - read before running any programs. - - * PROBLEMS: Add info on how to avoid damaging Mustek scanners. - -Mon May 5 07:06:54 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (chapter{Contact Information}): Fix URL. - - * doc/net.tex: Add missing sections. Make into chapter. - - * backend/pint.README: Remove. - - * backend/dll.c (ASSERT_SPACE): Call malloc() when devlist is - NULL. SunOS realloc() returns NULL otherwise. - * backend/net.c (ASSERT_SPACE): Ditto. - -Sun May 4 09:21:48 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/saned.c (EXIT_SUCCESS): Define as 0 if not defined by - stdlib.h. - - * frontend/scanimage.c: Include <sys/types.h>. - - * backend/qcam.c: Define PATH_MAX as 1024 if limits.h doesn't - define it. - * backend/dll.c: Ditto. - * backend/hp.c: Ditto. - * backend/mustek.c: Ditto. - * backend/net.c: Ditto. - * backend/pint.c: Ditto. - * backend/qcam.c: Ditto. - * frontend/xscanimage.c: Ditto. - * frontend/xcam.c: Ditto. - * frontend/preview.c: Ditto. - - * sanei/sanei_wire.c: Include <sane/config.h>. - * sanei/sanei_net.c: Ditto. - * sanei/sanei_codec_ascii.c: Ditto. - * sanei/sanei_codec_bin.c: Ditto. - * sanei/sanei_save_values.c: Ditto. - * backend/net.c: Ditto. - * frontend/saned.c: Ditto. - - * configure.in (AC_CHECK_HEADERS): Mention - /usr/src/linux/include/scsi/sg.h. - - * include/sane/config.h.in: Add - #undef HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H. - - * sanei/sanei_scsi.c [HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H]: - Include "/usr/src/linux/include/scsi/sg. - (sanei_scsi_cmd): Use Linux version if either HAVE_SCSI_SG_H or - HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H are defined. - - * doc/xscanimage.man: Rename --no-shm to --no-xshm. - -Mon Apr 28 09:55:02 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.56 released. - - * backend/qcam.c (sane_open): Move disabling of despeckle-filter - for b&w cameras to here (from init_options()). - - * frontend/preferences.c: Add missing default value for FILENAME. - - * backend/qcam.h: Add QC_BW_SET_CONTRAST, - QC_BW_AUTO_ADJUST_OFFSET, and QC_BW_GET_OFFSET. * backend/qcam.c - (sane_start): Use QC_BW_SET_CONTRAST when dealing with B&W camera. - Fix computation of QC_SET_NUM_H value. [Based on Guido Muensch's - patches.] - - * frontend/scanimage.c (advance): Move out-of-memory error message - from scan_it() to here. - (scan_it): When height is known a priori, allocate one extra line - to avoid realloc() when image has been filled. - - * backend/hp.c (BACKEND_NAME): Define as hp (reported by Henryk - Paluch). - - * backend/mustek.c (request_sense): Increase result size from 4 to - 16 bytes to shut up aha1542 driver (reported by Mathias Lautner). - - * frontend/scanimage.c (advance): Fix memory allocation logic - (bug reported by Matthias Lautner). - - * doc/sane-dll.man: Clarify that pre-loaded backends are not - affected by dll.conf. - - * doc/sane-pint.man: New file (contributed by Gordon Matzigkeit). - - * backend/dll.c (RTLD_NOW): Define as 0 if dlfcn.h doesn't define - it. - -Wed Apr 23 23:03:47 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * backend/Makefile.in, frontend/Makefile.in: Specify full - filenames, rather than just the directory name for INSTALL - destinations. This Automakeism helps debugging when the target - directory doesn't exist. - - * include/sane/config.h.in (HAVE_SYS_SCANIO_H): Define, for PINT's - sake. - - * backend/pint.c: Prefix sane includes with <sane/...>. - - * backend/dll.c (RTLD_NOW): Paramaterize, so that RTLD_LAZY is - used if RTLD_NOW is not defined. - (load): Try looking up the symbol with a leading underscore, if we - can't find it the first time. - - Make dynamic loading conditional on HAVE_DLOPEN rather than the - library and header file. - - * configure.in (enable_dynamic): Disable dynamic loading if the - system doesn't have dlopen. - -Tue Apr 22 00:17:41 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.55 released. - - * frontend/xscanimage.c (browse_filename_callback): Initialize - FILENAME before calling gsg_get_filename(). - - * doc/sane.tex: Change obsolete \driver{DVIps} into DVIps document - style option. - - * frontend/xscanimage.c (query): Update to new command name - length. - -Mon Apr 21 08:27:28 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/Makefile.in (install): Add rule to install man-pages. - (%.1 %.5): Add rule to generate man-pages (by substituting - actual paths). - (SECT1): New variable. - (SECT5): Ditto. - (MANPAGES): Ditto. - - * doc/sane-pnm.man: New file. - * backend/pnm.README: Deleted. - - * doc/sane-hp.man: New file. - * backend/hp.README: Deleted. - - * doc/saned.man: New file. - * frontend/saned.README: Deleted. - - * doc/sane-qcam.man: New file. - * backend/qcam.README: Deleted. - - * doc/sane-mustek.man: New file. - * backend/mustek.README: Deleted. - - * doc/sane-net.man: New file. - * backend/net.README: Deleted. - - * doc/sane-dll.man: New file. - * backend/dll.README: Deleted. - - * doc/xscanimage.man: New file. - * frontend/xscanimage.README: Deleted. - - * frontend/preview.c (event_handler): Restore preview image only - if preferences.preserve_preview is TRUE. - - * frontend/xscanimage.c (preview_options_dialog): Add an option - to control whether the preview image should be preserved. - - * sanei/sanei_load_values.c (sanei_load_values): Copy string value - into temporary buffer that is opt->size bytes long. Then pass copy - to sane_control_option(). - - * AUTHORS (Backends): Updated according to recent changes. - - * doc/sane.tex (The SANE Application Programmer Interface (API)): - Fix typo: replace () by {}. - - * PROJECTS (Backend): Update PINT entry. - - * frontend/xscanimage.c (prog_name): New variable. - (input_available): Use prog_name instead of hardcoding "xscan". - (preview_options_ok_callback): Ditto. - (preview_options_dialog): Ditto. - (usage): Ditto. - (interface): Ditto. - (main): Initialize prog_name. - - * frontend/scanimage.c: Update for new name (scanimage instead of - scan). - - * frontend/Makefile.in (SCAN_OBJS): Rename sources to xscanimage.c - and scanimage.c as well. - -Sun Apr 20 09:09:06 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.54 released. - - * sanei/Makefile.in (LIBSANEI_LTOBJS): Remove @LTALLOCA@. - (LIBSANEI_OBJS): Remove @ALLOCA@. - - * lib/Makefile.in: Invoke $(LIBTOOL) with --mode arg to avoid - depending on command names. Prefix $(LIBTOOL) invocation with - @-sign to reduce verbosity. - * frontend/Makefile.in: Ditto. - * backend/Makefile.in: Ditto. - * sanei/Makefile.in: Ditto. - - * frontend/saned.c (_PATH_HEQUIV): Define if not defined yet.. - - * configure.in: Check for libgimp/gimp.h instead of -lgimp since - -lgimp cannot be linked by itself (it has an unresolved reference - to PLUG_IN_INFO). - - * lib/strndup.c (strndup): Include <stdlib.h>. - - * frontend/xscanimage.README: Update. - - * sanei/sanei_scsi.c: Add missing "int" type in front of - sanei_scsi_max_request_size. - - * configure.in: Check for -lintl, -lsocket, and -lnsl for - braindamaged SVR4 systems. - - * frontend/scan.c (scan_it): Initialize min with 0xff, not ~0 - (Sun CC complains otherwise). - - * backend/Makefile.in: Use "ln -f -s", not "ln -sf", Solaris doesn't - like the former. Grrr... - - * lib/alloca.c: Don't use xmalloc(). - - * frontend/saned.c (store_reclen): Declare BUF as a pointer to - SANE_Byte (not char). - (do_scan): Ditto. - - * frontend/scan.c (fetch_options): Cast opt->name to (char *) - to suppress (spurious) warning. - - * backend/dll.c (sane_init): Skip preloaded backends with no name. - - * backend/hp.c (inquire): Cast BUF to (char *) to avoid warning. - (sane_read): Change type of NREAD to size_t (from ssize_t). - - * include/sane/sanei_backend.h (u_int16_t): Define u_int8_t, - u_int16_t, and u_int32_t if necessary. - - * include/sane/sane.h (sane_strstatus): Remove non-ANSI "const". - * backend/sane_strstatus.c (sane_strstatus): Ditto - - * include/sane/sanei_debug.h (DBG): Define alternate version for - non-GNU C compilers. - - * sanei/sanei_init_debug.c (sanei_debug) [!__GNUC__]: New function. - (max_level) [!__GNUC__]: New variable. - - * include/sane/sanei_wire.h: Fix typo in prototype for - sanei_w_value_type. - - * configure.in: Test for gtk_check_button_new() in libgtk. - - * lib/Makefile.in (CPPFLAGS): Add -I../include/sane. - - * frontend/scan.c (STRIP_HEIGHT): New macro. - (advance): Use above macro instead of hard-coding value. - (scan_it): Ditto. - (scan_it): Print error when out of memory. - - * frontend/sane-style.rc: Make the curve in the graph red. - - * frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Define for now. - (preview_new): Avoid push_visual()/get_visual() since it seems to - cause problems with some XFree86 servers (and may be others as - well). - - * frontend/preferences.h: Add member ADVANCED. - * frontend/preferences.c: Initialize member ADVANCED and add - an option descriptor for it. - - * frontend/gtkglue.c (panel_build): Layout panel different: all - options are now in one column (advanced options are at the - bottom). The graph widget (if any), will be shown in a separate - column to the right of the options. Display a group only when - there is at least one option in it. Create graph widget if there - is at least one vector-valued option. - (gsg_sync): New function. - (gsg_set_advanced): Ditto. - (gsg_message_dialog_active): Rename from SHOWING_MESSAGE and make - global. - - * frontend/gtkglue.h (GSGDialog): Rename member NOTEBOOK to - MAIN_HBOX. Add members ADVANCED_VBOX and ADVANCED. - - * frontend/gtkglue.c (group_new): New function. - (curve_new): Ditto. - (vector_new): Ditto. - - * backend/mustek.c (init_options): Initialize OPT_CUSTOM_GAMMA. - (sane_control_option): Handle OPT_CUSTOM_GAMMA. - - * backend/mustek.h (OPT_CUSTOM_GAMMA): New option. - - * configure.in (AC_CONFIG_HEADER): Update for new location. - - * include/sane/config.h.in: Move to here from include/config.h. - * *.[ch]: Replace <config.h> with <sane/config.h> (except for - files in lib. - - * frontend/saned.README: saned moved from bin/saned to sbin/saned. - - * configure.in (AC_CHECK_HEADERS): Check for gtk/gtkcurve.h. - - * backend/mustek.c (init_options): Undo changes of April 18th. - - * frontend/Makefile.in (install): Install $(BINPROGS) in $(bindir) - and $(SBINPROGS) in $(sbindir). - (SBINPROGS): New variable. - (BINPROGS): Ditto. - (PROGRAMS): Define as concatenation of the two vars above. - (install): Create $(bindir) and $(sbindir) if necessary. - -Sat Apr 19 18:21:02 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/Makefile.in (scanimage): Rename "scan" binary to - "scanimage" to avoid name-collision with MH's scan command. - - * backend/mustek.c (gamma_correction): Update according to new - gamma-table handling. - - * backend/mustek.h: Declare gamma_table as 4 arrays of 256 words - each. - - * backend/mustek.c (sane_control_option): Add missing return after - setting OPT_GAMMA_VECTOR. - - * frontend/progress.h: Protect against multiple inclusion using - macro progress_h, not __PROGRESS_H__ (names starting with - underscores are reserved for libc/system). - - * frontend/gtkglue.c: Remove include of <gtk.h>. - * frontend/xcam.c: Ditto. - * frontend/xscan.c: Ditto. - - * frontend/gtkglue.h: Include <gtk/gtk.h> instead of <gtk.h>. - * frontend/progress.c: Ditto. - - * Makefile.in (install): Install headerfiles. - (INSTALLED_INCLUDES): List of header files that need to be - installed. - -Sat Apr 19 18:15:03 1997 Michael K. Johnson <johnsonm@redhat.com> - - * */*.[ch]: Prefix sane-includes with <sane/...>. - include/sane*: Move to include/sane subdirectory. - -Sat Apr 19 08:25:36 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/gtkglue.c (set_option): Add missing return and use - snprintf instead of sprintf. - - * frontend/xscan.c (update_param): Multiply size by 3 if we're - dealing with a frame from a 3-pass image. - -Fri Apr 18 07:28:46 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (init_options): Mark all vector options as - SANE_CAP_ADVANCED. - - * frontend/scan.c (scan_it): Fail if advance() fails. - -Thu Apr 17 08:59:00 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_read): Add debug statement. - (reader_process): Remove extraneous if-statement that had the - effect of not passing along any data in 3-pass mode. - -Wed Apr 16 09:16:01 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/preview.h: Add member CANCEL. - * frontend/preview.c (scan_start): Make p->cancel sensitive. - (scan_done): Make p->cancel insensitive. - (preview_new): Set p->cancel insensitive. - - * frontend/preferences.h (Preferences): Add member "filename". - * frontend/preferences.c: Initialize new member "filename". - Declare member "filename" as a string. - - * frontend/xscan.c (device_dialog): Rename "Files" to "File". - (quit_xscan): Call pref_xscan_save() before exiting. Replace - global variable filename by preferences.filename. - - * frontend/xcam.c (main): Ditto. - - * PROBLEMS: New file. - - * frontend/gtkglue.c (scale_new): Set the adjustment page size to - 0.0. Make horizontal scale 200 pixels wide. - - * frontend/xscan.c (device_dialog): Move gtk_widget_show - (ScanWin.shell) after pref_device_restore (0, 0). - (pref_device_restore): Make arg-less since callback arguments must - not be used. - (device_dialog): Remove dummy args from call to pref_device_restore(). - - * include/saneopts.h (SANE_TITLE_SCAN_TL_X, SANE_TITLE_SCAN_TL_Y, - SANE_TITLE_SCAN_BR_X, SANE_TITLE_SCAN_BR_Y): Shorten titles. - - * frontend/xcam.c (main): Move gtk_widget_show(win.shell) to end - of function. - - * backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for - MFS-12000CX. - (sane_get_parameters): Must not depend on s->mode in this routine, - since s->mode is valid only once scanning has begun. - -Tue Apr 15 23:06:17 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_start): Issue SCAN_AREA and BACKTRACK - commands even during second and third pass. - (sane_get_parameters): Be sure to properly update the - params.format member during second and third pass. - -Sat Apr 12 11:40:52 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/scan.c (STRIP_HEIGHT): New macro. - (scan_it): Fix typo: test parm.lines instead of image.height. - - * backend/pnm.c (hand_scanner): New variable. - (sane_control_option): Handle setting/reading of HAND_SCANNER - option. - (getparmfromfile): Set parms.lines to -1 when simulating - hand-scanner. - (sod): Add hand-scanner option descriptor. - - * frontend/gtkglue.c (panel_build): Move gtk_widget_show - (notebook) to the very of this function. This works around the - notebook redrawing problems. Define WORKING_NOTEBOOK. - - * frontend/xscan.c (interface): Call quit_xscan() if - device_dialog() did not end up with a non-NULL dialog. - (quit_xscan): Add missing exit() call. - - * backend/mustek.c (attach): Print more debug info on detected - scanner (1 vs 3-pass, ADF & TA support). - (start_scan): Fix typo in code selecting the three-pass color filter. - -Sun Apr 13 23:53:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * backend/pint.c, backend/pint.h, backend/pint.README: Added to - distribution. - -Fri Apr 11 22:04:17 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.53 released. - - * frontend/xscan.c: Default to "out.pnm" instead of "out.ppm". - - * backend/mustek.c (get_image_status): Add debug message. - (sane_start): Only divide pixels_per_line by three if we're doing - a one-pass color scan. - (do_eof): New function. - (sane_read): Call do_eof() when done with a frame. - (do_cancel): Call do_eof(). - - * frontend/scan.c (write_pnm_header): New function. - (advance): Ditto. - (scan_it): Modify to support three-pass scanning and scanning of - images whose height is not known a priori (hand-held scanners). - -Wed Apr 9 14:39:59 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (ok_choose_dialog_callback): Make - argument-free. - (select_device_callback): Declare event as second argument and - call ok_choose_dialog_callback() if the callback was invoked - through a double-click. - (choose_device): Register select_device_callback() as - "button_press_event" handler instead of as "clicked" so we can - catch double-clicks. - -Tue Apr 8 10:31:47 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (init): Enable gtk_rc_parse() code (GTK-0.99.7 - requires patch for gtkstyle.c). - - * backend/hp.c (attach): Fix parenthization to shut up gcc. - -Mon Apr 7 13:08:45 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (preview_options_dialog): Rename "changed_text" - to "changed" to reflect latest GTK version. - (device_dialog): Ditto. - * frontend/gtkglue.c (text_entry_new): Ditto. - - * Version 0.52 released. - - * AUTHORS: Various updates. - - * backend/mustek.README: Add Adaptec info. - - * backend/mustek.c (sane_start): Call wait_ready() before any - other scanner command. - (wait_ready): New function. - (attach): Call wait_ready() instead of open-coding it. - - * doc/sane.tex (subsection{\code{sane\_strstatus}}): Include - net.tex. - * doc/net.tex: New file. - -Thu Apr 3 08:51:13 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (update_param): Change type of SIZE to u_long - (from long) since under NetBSD there seem to be some odd sign - problems otherwise (compiler bug?). - -Wed Apr 2 07:15:41 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_read): Always deliver EOF after reading - 0 bytes. - - * backend/qcam.c (reader_process): Fine-tune pixel interpolation. - (despeckle32): Ignore last red pixel in every line (it's always - black). Switch red and blue pixel location (the Connectix docs - are wrong). - - * backend/mustek.c (start_scan): Fix typo that caused start[4] to - be set incorrectly. - - * frontend/preview.c: Include <sys/param.h> to get PATH_MAX. - -Tue Apr 1 18:45:14 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (despeckle): New function. - (despeckle32): Ditto. - (init_options): Initialize OPT_DESPECKLE. - (reader_process): Add despeckling support. - (sane_control_option): Ditto. - (sane_start): Initialize req.despeckle. - - * backend/qcam.h: New member DESPECKLE. - - * frontend/preview.c (restore_option): Fix typo: it should be - SANE_ACTION_SET_VALUE (not _get_). - - * backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for - MFS-06000CX. - - * backend/hp.c (attach): Allow both TYPE_PROCESSOR (0x03) and - TYPE_SCANNER (0x06) as the first inquiry byte---some scanners use - the former, others the latter. - - * Version 0.51 released. - - * configure.in: Check for gtk_tooltips_new in libgtk. - -Mon Mar 31 14:42:56 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * frontend/scan.c (main): Added full_optstring, to allow getopt to - do full parsing of the option arguments. - - * backend/pnm.c (getparmfromfile): Need to round up the number of - bytes per line when scanning bitmaps. - -Mon Mar 31 07:48:50 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (attach): Send a dummy black-level command. The - first black-level command aftera camera reset doesn't appear to - "take." - - * lib/strndup.c: Correct typo: HAVE_STRDUP -> HAVE_STRNDUP. - - * frontend/xscan.c (pref_set_tooltips): New function. - (pref_build_menu): Build tooltip submenu. - - * frontend/preferences.h: New member TOOLTIPS_ENABLED. - * frontend/preferences.c: Add entry for TOOLTIPS_ENABLED. - - * frontend/gtkglue.h: Add members TOOLTIPS, TOOLTIPS_FG, and - TOOLTIPS_BG. - - * frontend/gtkglue.c (set_tooltip): New function. - (autobutton_new): Add argument TOOLTIPS and add button-description - via set_tooltip(). - (button_new): New args TOOLTIPS & DESC. Set DESC as tooltip help - string. - (scale_new): Ditto. - (option_menu_new): Ditto. - (text_entry_new): Ditto. - (panel_destroy): Destroy dialog tooltips as well. - (panel_build): Create tooltips and allocate colors for it; pass - new args to above functions. - (gsg_set_tooltips): New function. - - * Version 0.5 released. - - * backend/Makefile.in (install): Add missing double-quotes to - $(LIBS) and $(CONFIGS). Also create a symlink for libsane.a. - - * ltconfig: Revert back to version 0.9. - * ltmain.sh: Ditto. - - * frontend/scan.c (print_option): Substitute our own help string - for -x and -y options. - (main): Remove BROKEN_GETOPT code. - - * frontend/Makefile.in (CPPFLAGS): Undo yesterday's change. - * lib/getopt1.c: Ditto. - * lib/getopt.c: Ditto. - - * frontend/scan.c (main): Add some clever getopt () hackery to - work around multi-scan getopt () bug (patch by Gord Matzigkeit). - - * backend/qcam.README: Correct path of configuration file. - -Sun Mar 30 21:42:12 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/Makefile.in (CPPFLAGS): Add back -DBROKEN_GETOPT. - - * frontend/scan.c (main): Reinstantiate BROKEN_GETOPT code. - getopt_long() is _STILL_ broken. ;-( - - * lib/getopt.c: Use this code if __GNU_LIBRARY__ <= 6. Early - versions of glibc had a buggy getopt(). - * lib/getopt1.c: Ditto. - - * frontend/Makefile.in (xscan): Mention $(LIBSANEI). - - * frontend/xscan.c: Include <libgimp/gimp.h>, not <gimp.h>. - - * Makefile.in (distclean): Mention libtool. - * configure.in (AC_CHECK_FUNCS): Ditto. - - * include/config.h.in: Add undef of STRSEP. - - * sanei/sane_strstatus.c: Move to backend directory to minimize - chance of confusing this with a SANE-internal routine. - - * sanei/Makefile.in (LIBSANEI_OBJS): Remove sane_strstatus.o. - (LIBSANEI_LTOBJS): Remove sane_strstatus.lo. - - * backend/Makefile.in (libsane-%.la): Mention sane_strstatus.lo - explicitly (every SANE backend library MUST define this function - so we can switch backends at will). - - * frontend/Makefile.in (SCAN_OBJS): Remove getopt.o, getopt1.o. - - * Makefile.in (SUBDIRS): Mention lib as first directory. - - * configure.in (AC_OUTPUT): Mention lib/Makefile. - - * lib/strsep.c: New file. - * lib/strndup.c: Ditto. - * lib/Makefile.in: Ditto. - - * sanei/test_wire.c (main): Initialize codecs through - sanei_w_init(). - - * sanei/sanei_codec_bin.c (sanei_codec_bin_init): Ditto. - - * sanei/sanei_codec_ascii.c (sanei_codec_ascii_init): Remove - w->buffer initalization---this function should be called through - sanei_w_init () only. - - * sanei/sanei_scsi.c: Rename _sanei_scsi_max_request_size to - sanei_scsi_max_request_size. - - * backend/mustek.c (reader_process): Rename macro - SANEI_SCSI_MAX_REQUEST_SIZE to variable - sanei_scsi_max_request_size. - - * include/sanei_scsi.h: Rename _sanei_scsi_max_request_size to - sanei_scsi_max_request_size (names with a leading underscore are - reserved for libc/system). - (SANEI_SCSI_MAX_REQUEST_SIZE): Remove macro. - - * frontend/scan.c (main): Add a brief description of the program. - - * frontend/getopt.c: Move to lib. - * frontend/getopt1.c: Ditto. - - * backend/pnm.c (enum ppm_type): Remove non-ANSI trailing comma. - Correct struct indentation. - - * include/lalloca.h: Isolate alloca cruft in this file. - * frontend/gtkglue.c: Include lalloca.h in place of alloca hack. - * frontend/dll.c: Ditto. - * frontend/scan.c: Ditto. - * sanei/sanei_load_values.c: Ditto. - * sanei/sanei_scsi.c: Ditto. - -Sat Mar 29 00:14:37 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * backend/pnm.c (sane_read): Slurp in RGB files all at once, - rather than limping along three bytes at a time. - - * frontend/xscan.c (advance): Only define if HAVE_LIBGIMP. - - * backend/pnm.c (sane_read, sane_start, getparmfromfile): Handle - grayscale and monochrome bitmapped PNM files. - - * frontend/scan.c (main): Remove BROKEN_GETOPT workaround---the - new getopt() works properly when making multiple passes over the - argument list. - -Fri Mar 28 21:33:36 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * configure.in: Make the QuickCam device conditional on whether or - not the ioperm function exists. - - * sanei/sanei_scsi.c: created a stubbed version of sanei_scsi_cmd. - - * frontend/scan.c (main): Only print error messages to stderr. - Use fputs or fputc when it is possible to avoid printf. - - * sanei/sanei_wire.c (sanei_w_array, sanei_w_ptr, sanei_w_init), - sanei/sanei_save_values.c (sanei_save_values), - sanei/sanei_codec_ascii.c (ascii_w_string): Return an error if - malloc fails. - - * sanei/test_wire.c (main): Added --readonly flag to help test - wire robustness. - - * backend/Makefile.in (LIBSANEI): Deleted the `EXTRA' variable, - and used the convenience library, ../sanei/libsanei.a. - -Sat Mar 29 10:19:58 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex: Change version from 0.42 to 0.5. - - * README: Add pointer to frontend & backend specific README files. - - * backend/net.c (connect_dev): Ensure dev->ctl gets closed and - reset to -1 in case of failure. - - * configure.in: Look for gtk_preview_new() in libgtk so we can - ignore old GTK versions against which we can't build. - - * (config.sub): Replace with version that comes with - autoconf-2.12. The version that came with libtool-0.9 - doesn't like i686-unknown-linux. - -Fri Mar 28 13:12:17 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (subsection{sane_get_select_fd}): Remove extraneous - backslash. - - * backend/stubs.c (sane_cancel): Don't return anything. - - * include/sane.h: Remove trailing comma (for -pedantic). - - * frontend/xscan.c (interface): Complain when trying to call - a device that's unavailable. - (select_device_callback): Correct prototype. - - * frontend/xcam.c (main): Remove unused variable `label.' - - * backend/net.c (sane_cancel): Call SANE_NET_CANCEL. - (sane_start): Handle failure of SANE_NET_START. - - * frontend/saned.c (process_request): Implement SANE_NET_CANCEL. - - * frontend/gtkglue.h (GSGDialogElement): Remove member "label". - * frontend/gtkglue.c: Update accordingly. - (button_new): Use gtk_check_button_new_with_label () to simplify - this function. - - * frontend/gtkglue.c (unit_string): New function. - (panel_build): Append unit_string () to option's title if - the unit is not SANE_UNIT_NONE. Use "title" instead of opt->title - when creating widgets. - - * frontend/preview.c (preview_update): Compute width/height as - (max - min + eps) where eps is 1 for integer coordinates and - SANE_UNFIX(1) for fixed-point coordinates. - (display_partial_image): Support different scaling in x/y - direction. In the case where surface_unit == SANE_UNIT_PIXEL, - compute xscale/yscale based on the ratio between the _expected_ - width/height and the actual width/height. If they're not equal, - the backend must be doing some scaling (e.g., transfer-scale in - the qcam backend). - - * frontend/xscan.c (init): Disable gtk_rc_parse () calls for now - since gtk styles seem to be a bit buggy right now. - (scan_done): Remove input_tag if it is >= 0. - - * frontend/gtkglue.c: Include <preferences.h>. - (panel_build): For fixed-point range-constraints scale min/max/quant - based on the preferred metric. - (scale_update): Ditto. - (gsg_update_scan_window): Ditto. - - * backend/mustek.c (sane_control_option): For OPT_GAMMA_VECTOR_* - options, fail with SANE_STATUS_INVAL if the vector has zero length - (i.e., hasn't been set yet). - - * frontend/progress.c (progress_new): Don't make Cancel the - default-button---it's too easy to cancel by mistake otherwise. - - * frontend/sane-style.rc: New file. - - * frontend/xscan.c (init): New function. Parse gtk_rc_parse () - on /usr/local/share/sane-style.rc and ~/.sane/sane-style.rc if - those files exist. - - * configure.in (CPPFLAGS): Add PATH_SANE_DATA_DIR. - - * frontend/gtkglue.c (gsg_warning): New function. - (gsg_message): New function. - (gsg_error): Implement in terms of gsg_message (). - -Thu Mar 27 16:52:27 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/gtkglue.c (gsg_make_path): Terminate buffer with '\0' - before attempting mkdir(). - - * frontend/xcam.c (main): Use gtk_menu_item_new_label () instead - of gtk_label_new ()/gtk_menu_item_new (). - - * frontend/preview.c (establish_selection): Invoke - param_change_callback only if non-NULL. - (preview_update): Convert scale range to inches if that's user's - preference. - - * frontend/xcam.c (delayed_switch): New function. - (device_activate_callback): Call delayed_switch() rather than - executing that code directly. Pete tells me GTK is not designed - to have a widget rebuilt while a submenu is active. - - * frontend/gtkglue.c (panel_build): Avoid using notebook widget - until GTK+ has been fixed. - (idle_handler): New function: rebuild dialog if dialog->rebuild is - set. - (set_option): Set dialog->rebuild to TRUE and schedule - idle_handler() rather than directly calling panel_rebuild(). Pete - tells me GTK is not designed to have a widget rebuilt while a - submenu is active. - (gsg_refresh_dialog): Ditto. - -Thu Mar 27 14:54:23 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu> - - * backend/Makefile.in: Converted all for statements that might be - empty to use a temporary list variable. - - * frontend/Makefile.in (scan): Added getopt.o, getopt1.o to scan - dependencies. - - * frontend/getopt.c, frontend/getopt1.c, include/getopt.h: Added - to the distribution. - - * backend/net.c (connect_dev), frontend/saned.c (main): Don't use - TCP_NODELAY if it has not been defined. Look up tcp protocol - number if SOL_TCP is not defined. - - * sanei/test_wire.c (main): lseek after changing direction, or the - direction change ends up at the end of the output file. - Added option parsing, a usage message, and other cleanups. - - * sanei/sanei_codec_ascii.c (sanei_codec_ascii_init), - sanei/sanei_codec_bin.c (sanei_codec_bin_init): Initialize the - wire if it has a 0-length buffer. - - * sanei/sanei_wire.c (sanei_w_init): Only call the codec_init_func - if it is not NULL. - - * sanei/sanei_scsi.c: Parameterize inclusion of generic SCSI - headers based on HAVE_SCSI_SG_H, HAVE_SYS_SCSI_H, or - HAVE_SYS_SCSIIO_H. - - * configure.in (AC_CHECK_HEADERS): Check for scsi/sg.h, - sys/scsi.h, and sys/scsiio.h. - - * sanei/sanei_load_values.c, sanei/sanei_scsi.c, backend/dll.c: - Replaced unconditional alloca.h include with the cruft suggested - by the Autoconf manual. - - * sanei/alloca.c: Add to distribution. - - * sanei/Makefile.in: Eliminate GNU make dependencies, and use - @ALLOCA@ and @LTALLOCA@ as appropriate. - - * configure.in (AM_FUNC_ALLOCA): Use it. - - * aclocal.m4 (AM_FUNC_ALLOCA): Define it. - -Wed Mar 26 17:25:49 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_wire.c (sanei_w_status): Update *v only when decoding. - (sanei_w_bool): Ditto. - (sanei_w_constraint_type): Ditto. - (sanei_w_value_type): Ditto. - (sanei_w_unit): Ditto. - (sanei_w_action): Ditto. - (sanei_w_frame): Ditto. - - * frontend/xscan.c (quit_xscan): Always invoke gtk_main_quit() - (not just in standalone mode). - (quit_callback): Correct prototype. - - * backend/pnm.c (sod): Fix doc-string for option "three-pass". - - * frontend/xscan.c (advance): New function. - (input_available): Support 1 bpp frames. Call advance() instead - of open-coding it. Add RED/GREEN/BLUE frame support in GIMP mode. - Complain when encountering unknown depth. - (ScanWin): add member first_frame. - (scan_start): Initialize first_frame and frame_offset in - GIMP mode. - - * Integrate force unidirectional mode patch by Guido Muesch - <odiug@faho.rwth-aachen.de>: - * backend/qcam.c (attach): Force uni-directional mode if port - address starts with `u'. - (attach): Add debug statement to print QCam version. - - * Integrate 3-pass patches by Heiko - <Heiko.Schroeder@Post.RWTH-Aachen.de>: - * backend/mustek.cb - (scan_area_and_windows): Use 1/8" mode when MUSTEK_FLAG_USE_EIGHTS - is on (instead of pixel unit). - (mode_select): Set bit 3 in mode byte only if - MUSTEK_FLAG_USE_EIGHTS is off. - (encode_resolution): Don't do funky encoding for 3-pass scanners - in 10% resolution mode. It seems the docs are wrong and the - actual scanners require a much simpler setup. - - * frontend/preview.h: Add include of <sys/types.h>. - -Sat Mar 22 16:37:34 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (input_available): Reset ScanWin.x to zero at - the end of each line. - (input_available): Reset tile_offset to zero after updating a - tile. - (scan_done): Call gimp_display_new() to display the newly acquired - image. Draw final few lines of image if image height is not a multiple - of the tile-height. - - * frontend/saned.c (process_request): quit when receiving - unexpected procedure number---ignoring is dangerous. - - * backend/dll.c (load): Fix off-by-one bug in allocation of - libname. - - * frontend/xcam.c (prompt_for_device_name): Move grab-default - call behind signal_connect since otherwise the default action - won't work. - - * frontend/xscan.c (choose_device): Let "Ok" button be the one - that gets activated by default (by hitting the Return key). - - * frontend/preview.c (preview_destroy): Rename save_preview_image - to preserve_preview_image. - * frontend/preview.h: Ditto. - - * frontend/preview.c (restore_preview_image): New function. - (preview_destroy): Save preview image if it exists. - (preview_scan): New parameter SELECTION_ONLY. If true, - preview-scanning is limited to the selected area. - - * frontend/xscan.c (scan_done): Call quit_xscan() to exit. - (quit_xscan): Destroy preview if ScanWin.preview is non-NULL. - - * frontend/preview.c (draw_selection): Don't draw if p->gc is - NULL (i.e., if windows aren't mapped yet). - - * frontend/xscan.c: Move HAVE_LIBGIMP-specific code further - down (past the type & global variable decls). - - * configure.in (CPPFLAGS): Make --disable-shared impy - --enable-preload. - - * include/config.h.in: Add HAVE_STRNDUP. - -Fri Mar 21 00:01:00 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Implemented FreeBSD - version (untested). - - * sanei/sanei_load_values.c: Include <alloca.h> - - * frontend/preview.c (update_selection): New function to set - selection based on current scan-area option values. - (preview_update): Call update_selection (). - - * sanei/sanei_save_values.c: Add copyright notice. - * sanei/sanei_load_values.c: Add copyright notice and explanation - of algorithm. - (BITS_PER_LONG): New macro. - (SET): Ditto. - (IS_SET): Ditto. - (sanei_load_values): Add variables caused_reload and keep_going to - keep track of what options caused a reload_option and whether - the whole option-value setting process should be repeated. - - * include/config.h.in: Add #undef HAVE_LIBGIMP. - * frontend/xscan.c: Put all GIMP-dependencies inside - #ifdef HAVE_LIBGIMP. - Include <config.h>. - - * sanei/sanei_wire.c (sanei_w_init): Initialize status to 0. - (sanei_w_free): Preserve existing direction and do not flush i/o. - (sanei_w_space): Return EINVAL if reading 0 bytes. - -Thu Mar 20 09:11:21 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/gtkglue.h (dev_name): New member. - * frontend/gtkglue.c (gsg_destroy_dialog): free dialog->dev_name. - (gsg_create_dialog): Keep copy of device name in dev_name member. - - * include/sanei_backend.h: Move stubs into backend/stubs.c and - define redirection macros only if STUBS is not defined. - * backend/stubs.c: New file. - - * configure.in (AC_PROG_RANLIB): Removed. No longer needed with - libtool. - * (frontend/Makefile.in): Adapt to libtool. - * (backend/Makefile.in): Ditto. - * (sanei/Makefile.in): Ditto. - - * backend/mustek.c (attach): Check result[0] == 0x06 to find out - whether we're dealing with a scanner (rather than attemting to - find the string "SCANNER" ). - - * backend/hp.c (sane_read): Initialize nread with max_len, not - *len. - (sane_get_parameters): Add missing `== 0' comparison for strcmp() - calls. - (inquire): Generalize so we can inquire any quantity and improve - parsing. - (attach): Use reasonable default value if inquiry of a quantity - fails. - (sane_start): Report error if inquiry of a scan parameter fails. - -Wed Mar 19 18:03:38 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xcam.c (prompt_for_device_name): grab default for OK - button (doesn't seem to work, though). - - * frontend/progress.c (progress_new): Connect progress_cancel() - via signal_connect(), not signal_connect_object() and pass P, not - P->SHELL. - (progress_cancel): Don't free progress structure (must be done by - app). - - * frontend/xscan.c (input_available): New function. - (scan_done): Ditto. - (scan_start): Ditto. - (progress_cancel): Simply call sane_cancel(). - (scan_dialog): Moved most of the code to above functions. - - * frontend/gtkglue.c (get_filename_button_clicked): New function. - (gsg_get_filename): Ditto. - - * frontend/xscan.c (scan_dialog): Do not quit xscan when in - standalone mode. - (scan_dialog): Prompt for output filename in standalone mode. - (filename): New variable. - - * backend/pnm.c (sane_control_option): Remove "pnm." prefix - in debug messages. - - * backend/qcam.c (sane_cancel): Remove "qcam." prefix in debug - messages. - - * backend/mustek.c: Remove "mustek." prefix in debug messages. - -Tue Mar 18 17:30:29 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_close): Remove superfluous "[mustek]" in - debug string. - - * sanei/sanei_scsi.c (sanei_scsi_cmd): Implement HP-UX version - of this function (untested). - - * backend/qcam.c (reader_process): Enable code to handle 4 bpp - and 6 bpp cases. - -Thu Mar 13 13:15:21 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (subsection{Scan Area Options}): Attempt to - clarify the meaning of "top-left" corner. - -Tue Mar 11 07:12:53 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/gtkglue.c (panel_build): Fix typo in matching of - "resolution" option (missing == 0). - -Mon Mar 10 20:19:06 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * Announced pre0.5 snapshot. - - * backend/qcam.h: Make transfer-scale part of the "mode" group. - - * backend/qcam.c (sane_read): Moved return of SANE_STATUS_EOF - behind test for delivering EOF. - - * frontend/xscan.c (device_dialog): Relabel "Cancel" button to - "Quit". - - * backend/qcam.c (init_options): Set SANE_CAP_ADVANCED for geometry - group. - * backend/mustek.c (init_options): Ditto. - - * backend/pnm.c (pass, three_pass): New variables. - (sod): Add option "three-pass" to simulate a three-pass scanner. - (sane_control_option): Add support for three_pass option. - (getparmfromfile): In three-pass mode, set format and last_frame - based on `pass'. - (sane_start): If input file is open already, fail unless we're - scanning the next frame of a three-pass image. - (sane_read): Handle three-pass case. - -Sun Mar 9 13:20:19 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/gtkglue.c (text_entry_callback): Only call - gtk_entry_set_text() if the backend modified the string. Otherwise, - infinite recursion occurs on any change (since the change results - in a change...). - - * frontend/xcam.c (next_frame): Reset win.remaining to zero. - - * backend/qcam.c (init_options): Set size of "resolution" option - to sizeof("High"). - - * doc/sane.tex (subsection{Scan Area Options}): Allow word-list - as a constraint. - - * configure.in (CFLAGS): Add -D_GNU_SOURCE to CFLAGS since we - now depend on snprintf (). - - * frontend/xscan.c (device_dialog): Fix typo: PixelHeight should - be > 0, not == 0 in order for us to create the preview window. - (device_dialog): Ditto. - (device_dialog): Add ScanWin.preview to frame container. - -Sat Mar 8 10:19:41 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (subsection{sane_get_select_fd}): Clarify what - must happen when the end of a frame has been reached. - - * frontend/xcam.c (input_available): Stop when sane_read() returns - 0 bytes. Fix typo: win.data needs to be set to dst, not src, on - exit. - - * backend/qcam.h (read_fd): New member. - * backend/qcam.c (sane_get_select_fd): Return read_fd instead of - from_child. - (sane_open): Initialize s->read_fd to -1. - (sane_close): Close s->select_fd if >= 0. - (sane_start): Make read_fd dup() of s->from_child. - (sane_cancel): Close s->read_fd if >= 0. - (sane_set_io_mode): Modify s->read_fd instead of s->from_child. - - * frontend/scan.c: Include <sanei.h> for NELEMS macro. - * frontend/xcam.c: Ditto. - - * configure.in (CPPFLAGS): Add defines for V_MAJOR and V_MINOR. - (V_MAJOR, V_MINOR): New variables. - - * sanei/Makefile.in (SANEI_OBJS): Mention sanei_net.o. - - * include/sanei_net.h: New file (split from sanei_wire.h). - * sanei/sanei_net.c: New file (split from sanei_wire.c). - - * configure.in: Add -Wall to CFLAGS when using gcc. - - * frontend/Makefile.in (saned): List -lsanei before -lsane - so saned never depends on sanei_*-routines that may be present - in -lsane (the only dependencies for that library must be - on sane_* names). - - * backend/Makefile.in (LIBS): Remove -ldl (configure will add - it if available). - (SHLDFLAGS): Use -usanei_init instead of --whole-archive option. - (SHLDPOSTFLAGS): Remove --no-whole-archive. - - * backend/dll.c: Add include of <config.h>. - (DYNAMIC): New macro. Defined it dynamic loading support is - available and enabled. - Include <dlfcn.h> only when DYNAMIC is defined. - (load): Make no-op when DYNAMIC is not defined. - (sane_exit): Never call dlclose() if DYNAMIC is not defined. - - * include/sanei_scsi.h: Rename from genscsi.h and rename prefix - from `genscsi_' to `sanei_scsi_'. - * sanei/sanei_scsi.c: Ditto. - * backend/mustek.c: Rename `genscsi_' to `sanei_scsi_'. - - * configure.in: Check for availability of -ldl and <dlfcn.h>. - -Fri Mar 7 15:21:38 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * sanei/sanei_wire.c: New file. - * sanei/sanei_codec_bin.c: Ditto. - * sanei/sanei_codec_ascii.c: Ditto. - - * backend/dll.c (sane_exit): Call dlclose() only if handle is - non-NULL. - (sane_init): Chain together preloaded backends. - - * backend/qcam.c (attach): Make static. - (sighandler): Ditto. - (qc_getstatus): Ditto. - * backend/mustek.c (attach): Ditto. - - * backend/dll.c (op_name): Remove `sane_' prefix. - - * sanei/sanei_init_debug.c (sanei_init_debug): Upcase backend - name when building environment variable name. - - * backend/genscsi.c: Make use of sanei_debug.h. - - * backend/mustek.c: Adapt to use sanei_backend.h. - * backend/net.c: Ditto. - * backend/pnm.c: Ditto. - * backend/qcam.c: Ditto. - - * backend/dll.c (sane_exit): Fix typo that resulted in the - last backend not being exited. - -Thu Mar 6 21:25:27 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (subsection{\code{sane\_init}}): Allow - authorization callbacks during sane_start() but not during - sane_read(). - -Tue Mar 4 21:04:16 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_close): Print debug message when trying - to close an unknown handle. - -Thu Feb 27 18:10:20 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (chapter{Contact Information}\label{chap:contact}): - Add `listserv.' to mailing list address---seems to be needed for - subscriptions etc. - -Sun Feb 9 12:54:20 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.README: Add pointer to Ingmar's 53c400 patch. - -Sat Feb 8 11:49:24 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (line_distance): Add more debug output. - -Fri Feb 7 19:21:36 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (line_distance): Remove erroneous #ifdef - around FACTOR and COLOR. - - * doc/sane.tex (subsection{sane_init}): Make username/password - fixed length arrays so no malloc/free magic is needed. - (subsection{Preview Mode Option}): New section. - - * include/sane.h: Ditto. - - * include/sane.h (SANE_Char): New type. - -Tue Feb 4 18:47:52 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_get_parameters): Correct typo: replace - s->pass with s->params.format. - -Fri Jan 31 16:16:26 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (attach): Print debug message when using - special line-distance algorithm. - Enable special line-distance algorithm only for firmware - revisions < 1.02. - Determine fw revision based on INQUIRY result. - -Thu Jan 30 21:22:38 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (section{Attaching to a SANE backend}): Rename - metanet -> net, netproxy -> saned, metadl -> dll and update - hierarchy figure as well. Added autolum meta backend as a - filter example. - - * TODO: Rename metanet -> net, metadl -> dll. - - * AUTHORS (Frontends): Rename metanet -> net, metadl -> dll, - mention saned and xcam and sort entries alphabetically. - - * backend/net.c (sane_control_option): Replace all occurances of - metanet with net. - * backend/net.README: Ditto. - Rename env var METANETHOST to SANE_NET_HOST. - - * backend/dll.README: Replace all occurances of metadl with dll. - * backend/dll.c: Ditto. - - * backend/dll.conf: Comment out metanet since it's a bit of a - security risk (no authentication just yet). - - * backend/Makefile.in (CONFIGS): New macro (list of config files) - (install): Change install rule so existing configuration files - are not overwritten. - Replace all occurances of metanet with net. - - (V_MINOR): Bump up to 43. - -Tue Jan 28 08:17:18 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/Makefile (saned): Mention -lsanei before -lsane so - saned does not incorrectly depend on sanei_printf/sanei_scanf in - -lsane (if it happens to define those symbols). - - * backend/metanet.c (sane_init): Rename SANE_Authorization_Callback - to SANE_Auth_Callback. - * backend/mustek.c (sane_init): Ditto. - * backend/pnm.c (sane_init): Ditto. - * backend/metadl.c (sane_init): Ditto. - - * frontend/saned.c (main): Put output socket in TCP_NODELAY mode. - Include of <sys/socket.h> - - * backend/metanet.c (openit): Ditto. - -Mon Jan 27 19:32:29 1997 David Mosberger-Tang <davidm@azstarnet.com> - - - * doc/sane.tex (subsection{Device Descriptor Type}): Change vendor - name "None" to "Noname". - * backend/pnm.c (dev): Change vendor name from "noname" to "Noname". - - * include/sane.h (SANE_STATUS_ACCESS_DENIED): New status value. - * sanei/sane_strstatus.c (sane_strstatus): Return appropriate - status string. - - * frontend/xscan.c (scan_dialog): Don't depend on first_frame - when creating image---the old code didn't work for R/G/B-only - frames anyhow, so there is no point pretending. - - * include/sane.h (SANE_Parameters): Rename first_frame to - last_frame. - * backend/metanet.c (sane_get_parameters): Update accordingly. - * backend/qcam.c (sane_get_parameters): Ditto. - * frontend/saned.c (readcmd): Ditto. - * frontend/test.c (testsane): Ditto. - * backend/mustek.c (sane_get_parameters): Set last_frame unless - the current pass is acquiring a red- or green-only frame. - - * doc/sane.tex (subsection{sane_get_parameters)): Change - FIRST_FRAME into LAST_FRAME. - - * backend/metanet.c: Initialize PEER with -1. - (sane_get_select_fd): Return PEER and succeed if not negative. - - * include/netsane.h (ns_printf, ns_scanf, netfd_wr, netfd_rd): - Remove (obsolete). - - * frontend/saned.c: Increase STRBUF size to 32KB to get better - scan_read() throughput. - - * include/sane.h (SANE_Athorization_Callback): Return void - (instead of int) and make USERNAME and PASSWORD (pointers to) - return values. - - * frontend/saned.c (netsane_auth_callback): Update prototype. - - * backend/metanet.c (sane_init): Move assignments out of - if-conditional for clarity (and to avoid gcc warning). - - * sanei/sanei_printf.c: Include <memory.h>, <string.h>. - - * backend/Makefile.in (libsane-mustek.a): Replace - ../sanei/sane_strstatus.o with appropriately defined EXTRA - macro. - - * backend/mustek.c (attach): Initialize ld.mode to MLD_NORMAL for - all scanners but MFS-12000SP. - (line_distance): In MD_MFS correction mode, do not issue LD - command. - (sane_close): Free s->ld.red_buf if non-NULL. - (fix_line_distance_mfs): New function. - (fix_line_distance_normal): Rename from fix_line_distance(). - (reader_process): In MLD_MFS line-distance mode, call the - mfs-specific routine, not the normal one. - - * backend/mustek.h (Mustek_Scanner): New members ld.red_buf, - ld.green_buf. - (MUSTEK_FLAG_LD_MFS): New flag to indicate when MFS-specific - line-distance correction is needed. - - * backend/metanet.c: Fix up some minor formatting problems due - to indent. - - * Merge in Andy's netsane diffs. - -Sun Jan 26 00:04:22 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (zoom_in_preview): Ignore selections of zero - or negative width/height. - (set_max_selection): Use SANE_UNFIX() instead of open coding. - Adapted to use gtkglue. - - * backend/metadl.c (sane_init): Grab authorization callback. - (authorization_callback): New variable. - (load): Pass authorization callback to init function. - - * frontend/gtkglue.h (gsg_destroy_dialog): Add param_callback. - -Sat Jan 25 17:35:52 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/Makefile.in (distclean): Mention $(TESTPROGRAMS). - - * backend/metanet.c (copy_opt): Fix constraint-length computation. - - * backend/metadl.c (sane_get_devices): Pass along LOCA_ONLY arg - to backend. - - * frontend/xcam.c (main): Remove extraneous calls to gtk_exit() - and sane_exit(). - - * frontend/scan.c (main): Install sane_exit() as atexit handler. - - * backend/metadl.c (sane_get_devices): Ignore NULL BE_LIST. - - * frontend/saned.c (quit): New function. - (main): catch SIGALRM, and SIGPIPE. - - * backend/metanet.c (sane_get_devices): Return empty list of - LOCAL_ONLY is TRUE. - - * frontend/saned.c (readcmd): Don't take LOCAL arg from - request---always pass SANE_TRUE! - - * doc/netprotocol.doc (sane_get_devices): Don't need LOCAL arg. - - * include/sanei.h: Include <sane.h>. - - * frontend/test.c (testsane): Print status message instead of - status code and make robust against failed calls. Use fprintf(stderr - instead of printf. - - * backend/qcam.c (reader_process): Remove extraneous arg. - (reader_process): Declare `static' to make setjmp() safe. - - * frontend/saned.c (readcmd): Delete unused variable schr_hlp. - (peerfp): New variable. - Rename ns_printf() to sanei_printf() and pass peerfp arg. - Rename ns_scanf() to sanei_scanf() and pass peerfp arg. - (say_helo): Make peerfp refer to fd 0. - - * backend/metanet.c (openit): Return FILE*, not socket. - (openit): Return 0, not -1 in case of failure. - (peerfp): New variable. - Rename ns_printf() to sanei_printf() and pass peerfp arg. - Rename ns_scanf() to sanei_scanf() and pass peerfp arg. - - * sanei/sane_strstatus.c: New file (in lieu of backend/sane.c) - * sanei/sanei_constrain_value.c: Ditto. - * sanei/sanei_init_debug.c: Ditto. - - * sanei/sanei_scanf.c (ns_scanf): New file (based on Andy's - ns_scanf). - Use int8_t for 'c', int32_t for 'd'. - Include <sys/types.h>. - - * sanei/sanei_printf.c (sanei_printf): New file (based on Andy's - ns_printf). - Use int8_t for 'c', int32_t for 'd'. - Include <sys/types.h>. - - * include/netsane.h (CMD_SANE_STRS): Remove. - - * backend/metanet.c: Include <errno.h> - (sane_strstatus): Remove. - - * backend/Makefile.in (BACKENDS): Mention libsane-metanet. - - * backend/metanet.c (openit): Use memcpy instead of bcopy. Use - inet_aton() instead of inet_addr(), don't prototype. - (sane_get_devices): Use strdup() instead of opencoding it. - (sane_get_devices): Don't append " (NS)" to modelname! Metanet - already prefixes the devicename with netsane, which is good - enough. - - * backend/sanei.h (IF_DBG): New macro. - - * PROJECTS (Backend): Mention saned, metanet, and autoadj. - (Frontend): New info. - - * AUTHORS: Update to reflect sanescan -> xscan namechange. - Credit Andy for netsane. - -Fri Jan 24 00:01:45 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * doc/sane.tex (subsection{\code{sane\_get\_option\_descriptor}}): - Define how long the returned option descriptor must remain valid. - - * frontend/gtkglue.c (autobutton_update): Check for - SANE_INFO_RELOAD_OPTIONS. - (button_update): Ditto. - - * frontend/xcam.c (main): Add device info label. - - * backend/mustek.c (init_options): Make OPT_BRIGHTNESS and - OPT_CONTRAST inactive by default. - - * frontend/xcam.c (exit_callback): Only call gsg_destroy_dialog() - if dialog is non-null. - -Thu Jan 23 00:17:46 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (sane_control_option): Return - SANE_STATUS_DEVICE_BUSY when attempting to set option during - scanning. - (sane_close): Call do_cancel(), not sane_cancel(). - (sane_start): Ditto. - - * backend/pnm.c (sod): Rename "File" group to "Source Selection". - - * frontend/xcam.c (device_name_dialog_cancel): New function. - (device_name_dialog_ok): Ditto. - (prompt_for_device_name): Ditto. - (build_device_menu): Move "Rescan devices..." from build_files_menu() - to here. Add "Specify device name..." entry that invokes - prompt_for_device_name. - (play_stop_button): Ignore call if there is no device_dialog yet. - (main): Don't attempt to set preview size if there is no device - dialog yet. - - * frontend/gtkglue.c (text_entry_callback): Don't ignore tab - key---it's used to switch focus! - - * backend/qcam.c (qc_wait): Return read value so optimizer won't - be able to get rid of it easily. - (qc_lock_wait): Use same lockname as qcam-0.7d for - interoperability. - (reader_process): Explicitly do an enable_ports() in the reader - process. Linux/x86 doesn't inherit i/o port access rights. - - * frontend/xcam.c (stop_camera): New function. - (input_available): Use stop_camera(). - (next_frame): Ditto. - - * backend/genscsi.c (genscsi_open): Add missing DBG_INIT(GENSCSI). - (genscsi_cmd): Return SANE_STATUS_DEVICE_BUSY if EBUSY is - returned. - - * frontend/xcam.c (input_available): Fix line wrap for - SANE_FRAME_GRAY. - - * include/sane.h: Remove old SANE_STATUS_AGAIN. - * backend/sane.c (sane_strstatus): Ditto. - * backend/mustek.c (sane_read): Return SANE_STATUS_GOOD, not AGAIN - when no data available. - (sane_start): Add debug printing. - (sane_set_io_mode): Fix typo: return SANE_STATUS_GOOD on success. - - * backend/mustek.c (sane_control_option): Add support for - OPT_BACKTRACK. - (attach): Add lots of debug printing. - - * backend/qcam.README: New file. - - * backend/qcam.c (sane_control_option): Allow changing resolution - while scan is in progress, but set RELOAD_OPTIONS only if not - scanning already. - - * frontend/xcam.c (canvas_events): Get rid of old debug messages. - - * backend/qcam.c (sane_get_parameters): Update parameters only if - not scanning. This makes it possible to change certain options - (such as width/height while a scan is in progress). - (sane_control_option): Allow changing of image corners, - transfer-scale, and depth while scan is in progress. Set - RELOAD_PARAMS only if scan is not in progress. - (sane_start): Return DEVICE_BUSY if scan is in progress. - - * configure.in (PACKAGE_VERSION): Version 0.41 released. - - * backend/qcam.c (brightness_range): New variable. - (init_options): Use brightness_range instead of u8_range to - avoid going into bulb-mode accidentally. - -Wed Jan 22 09:16:21 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (reader_process): Correct typo: it's buf, not - buffer that we want to write out in high-res mode. - (qc_reset): New function. - (reader_process): Send at least one byte of data after receiving a - signal. - (sighandler): New function. - (sane_cancel): If a read request is outstanding, cancel request by - (a) sending SIGINT to reader process, (b) reading one byte of data - in blocking mode, and then (c) reading whatever is left in the - pipe in non-blocking mode. - (sane_read): Return SANE_STATUS_CANCELLED if SCANNING is not set. - - * backend/qcam.h (QC_Scanner): Remove unused x/y fields. - - * backend/qcam.c (sane_close): Call disable_ports(). - (sane_init): Replace isblank() with isspace() (former is a GNU - extension). - (sane_control_option): Scale corner coordinates when switching - resolution and ensure they're always legal values. - (sane_close): Check for reader_pid >= 0 not != 0! - (sane_exit): Move disable_ports () from sane_close to here. - (sane_start): Keep track of when we're holding lock. - (sane_read): Release lock if s->holding_lock is TRUE and we - read a few bytes. - (sane_cancel): Release lock if it's being held. - - * backend/qcam.c: Clean up unused variables. - -Tue Jan 21 13:49:00 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (sane_control_option): Keep track of changes to - option values. - (sane_get_select_fd): Implemented. - (sane_set_io_mode): Ditto. - (reader_process): New function. - (sane_start): Modify to use reader_process(). - - * backend/qcam.h: (struct QC_Scanner): New field value_changed. - -Mon Jan 20 22:11:11 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/metadl.c (sane_open): Correctly handle case where - backend name is empty. - -Sun Jan 19 10:29:43 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/qcam.c (attach): Add qc_wait() calls after each - write_lpcontrol() call to ensure reliable communication. - (attach): Add debug output in case of failure. - - * Version 0.4 released. - -Sat Jan 18 10:12:40 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/xscan.c (get_scan_size): Handle case where scan - width/height is of type SANE_TYPE_INT. - (get_scan_size): If width/height unit is pixels and the height is - less than 500 pixels, use a ratio of 1. - (device_dialog): Call update_complete_dialog() to ensure inactive - options do not show (there probably is a better solution to this). - - * frontend/scan.c (main): Compute bottom-right position as - top-left + width/height - 1 (the - 1 is new and necessary and - works both for fixed and integer values). - (print_option): Insert line-break when column >= 79 (not 80) to - leave last column blank (better when running inside Emacs, for - example). - (main): Fix typos: case 't': window[2] -> window[3], switch short - option names for top/left. - (print_option): Print current option values (except for vectors). - (fetch_options): Another off by one bug: width is br_x|y-tl_x|y+1. - -Thu Jan 16 20:26:29 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/sane.c (sanei_constrain_value): Fix so it properly - handles strings that are longer than any of the strings in a - string list. - - * frontend/scan.c (main): Subtract value of top-left-x/top-left-y - from width/height, respectively after all options have been - read in. - (main): Print help message _after_ options have been processed. - (fetch_options): New function. - (set_option): Call fetch_options() if SANE_INFO_RELOAD_OPTIONS is - set. - (main): Call fetch_options() instead of open-coding same. - - * doc/sane.tex (subsection{Device Descriptor Type}): Add index - entry for device-name. - -Wed Jan 15 19:55:03 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/metadl.c (sane_init): Call DBG_INIT() and declare - debug level variable with DBG_DECL. Added various debug - statements. - - * backend/pnm.c (sane_init): Ditto. - * backend/mustek.c (sane_init): Ditto. - - * frontend/scan.c (parse_scalar): Default to mm again (instead of - cm). Using `mm' as the default is counter-intuitive since the - help info is printed with `mm' as the unit. - - * frontend/xscan.c (main): Pass local_only==SANE_FALSE as second - argument to sane_get_devices(). - -Sun Jan 12 13:12:45 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/sane.c (sanei_constrain_value): For string-lists, ignore - case and allow prefixes as long as they remain unique. - - * frontend/scan.c (print_option): Print "auto" as a legal option - value if the option has capability SANE_CAP_AUTOMATIC set. - (process_backend_option): If option has SANE_CAP_AUTOMATIC set, - let option value of "auto" turn on automatic mode. - -Wed Jan 8 19:55:31 1997 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/Makefile.in (install): Modify install rule so that - $(libdir) gets added to /etc/ld.so.conf if it isn't there - already. - (COMPILE): Use $(SHCFLAGS) instead of $(CFLAGS). - (LINK): Remove (unused). - -Wed Dec 25 20:21:39 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.README: Add section "SCSI Adapter Tips". - -Fri Dec 13 20:02:03 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (line_distance): Rename - LINE_DISTANCE_WORKAROUND to NEED_MUSTEK_LINE_DISTANCE_WORKAROUND. - Include <config.h>. - -Thu Dec 12 20:19:26 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.h (next): New member. Forms linked list of open - handles. * backend/mustek.c (first_handle): New variable. Root - of list of open handles. - (sane_open): Insert handle into list of open handles. - (sane_close): Remove handle from list of open handles. - -Wed Dec 4 18:37:45 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (attach): Added back MFS-12000SP, MFS-08000SP, - and MFS-06000SP. At least the first one really does exist. I - don't know how the differ from the other scanners, but it looks as - if line-distance correction might be different. - -Tue Dec 3 21:22:54 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/sane.c (sane_strstatus): Remove trailing dot from error - message. - -Mon Dec 2 19:12:53 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * backend/mustek.c (max_string_size): New function to determine - maximum size of a string constraint list. - (init_options): Use max_string_size () to initialize size of - string-valued options. - -Sun Dec 1 15:44:53 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * Version 0.1 released. - - * backend/mustek.c (attach): Fix mispelled/bad model names: - MFS-12000SP -> MSF-12000SP - MFS-08000SP -> MSF-08000SP - MFS-06000SP -> MSF-06000SP - MFS-08000CZ -> <removed> - MFS-06000CZ -> <removed> - -Tue Nov 26 19:11:18 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/scan.c (print_option): Separate option name from option - values by blank, not equal so the syntax is correct even for short - options. - (parse_scalar): Added missing newline to error message. - -Sat Nov 16 17:26:19 1996 David Mosberger-Tang <davidm@azstarnet.com> - - * frontend/scan.c (main): Created (by Andy). - - * backend/pnm.c: Adapted from Andy's pnm.c (just minor updates). - - * backend/mustek.c: Created. - * backend/metadl.c: Ditto. |