diff options
Diffstat (limited to 'ChangeLog-1.0.10')
| -rw-r--r-- | ChangeLog-1.0.10 | 890 |
1 files changed, 890 insertions, 0 deletions
diff --git a/ChangeLog-1.0.10 b/ChangeLog-1.0.10 new file mode 100644 index 0000000..57dee9a --- /dev/null +++ b/ChangeLog-1.0.10 @@ -0,0 +1,890 @@ +****** Release of sane-backends 1.0.10. End of code freeze ****** + +2003-02-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Artec AM12e+. + +2003-01-31 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: New version: 1.0.10. Disabled warnings for + release. + * doc/Makefile.in: Added plustek to list of directories. + +2003-01-31 Gerhard Jaeger <gerhard@gjaeger.de> + * doc/plustek/Plustek-USB.txt: Added comment about scanner.o + * backend/plustek.c backend/plustek-devs.c backend/plustek-usb.h + backend/plustek-usbshading.c: Fixed major bug, that avoid proper + shading on CCD-devices like HP 2200C. Fixed also CanoScan 1220 + settings, as the current ones didn't work + +2003-01-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Canon, Fijitsu and Prolink + scanners. + +2003-01-29 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * frontend/saned.c: Fixed severe bug in saned that allowed a + remote frontend to crash saned (null pointer derefence) if no + scanners are connected. + +---- CODE FREEZE FOR SANE 1.0.10 --- +-- snapshot 1.0.10-pre3 + +2003-01-26 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/sane-backends.de.po po/sane-backends.es.po po/sane-backends.fr.po + po/sane-backends.pt.po po/sane-backends.ru.po po/sane-backends.sv.po: + Minor updates due to backend changes. + * TODO: Added icc problem. + * NEWS: Updated. + +2003-01-25 Jochen Eisinger <jochen.eisinger@gmx.de> + + * sanei/sanei_pa4s2.c: added some #ifdefs to make it compile with + the Intel C++ Compiler (icc). + * backend/mustek_pp.c: fixed some character encoding issues in + debug messages + * README.linux: added a note about the Intel C++ Compiler + +2003-01-24 Jochen Eisinger <jochen.eisinger@gmx.de> + + * backend/mustek_pp_ccd300.c: continued on the CCD low-level driver. + There is still some bug in it, that keeps it from actually scanning + something... + +2003-01-24 Jochen Eisinger <jochen.eisinger@gmx.de> + + * doc/descriptions/mustek_pp.desc: added supported scanners + +2003-01-24 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/bh.c backend/coolscan.c: Minor conversion fixes (from + Andrea Suatoni <a.suatoni@telefonica.net>). + * backend/test.c: Use "Color pattern" consistantly. + * acinclude.m4 aclocal.m4 configure configure.in + include/sane/config.h.in: Declare prototypes for all functions that + may miss on some platforms. + * doc/descriptions/unsupported.desc: Added Mustek parport scanners. + Added more information for Primascan Colorado 2600u. + * TODO: Updated Irix patches and desc section. + +2003-01-24 Gerhard Jaeger <gerhard@gjaeger.de> + * doc/plustek/Plustek-USB-TODO.txt + doc/plustek/Plustek-USB.txt + Documentation update + * doc/descriptions/plustek.desc: status updates + * backend/plustek.conf fixed options + * backend/plustek.c backend/plustek-devs.c backend/plustek-usb.c + backend/plustek-usbhw.c backend/plustek-usbimg.c + backend/plustek-usbscan.c backend/plustek-usbshading.c + backend/plustek.h backend/plustek-usb.h + Minor fixes and prototype description updates, code cleanup + +2003-01-23 Karl Heinz Kremer <khk@khk.net> + + * doc/descriptions/epson.desc: Added Perfection 3200/GT-9800 + +2003-01-23 Andras Major <andras@users.sourceforge.net> + + * backend/doc/sane-coolscan2.man: added a .TP that mysteriously + vanished + +2003-01-23 Andras Major <andras@users.sourceforge.net> + + * backend/coolscan2.c: hack for IR readout with LS-4000. + +2003-01-23 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Primax/Visioneer Primascan + Colorado 2600u and UMAX Astra 4500. + +2003-01-22 Karl Heinz Kremer <khk@khk.net> + + * doc/descriptions/epson.desc: Corrected syntax for GT-6000 entry + +2003-01-22 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * sanei/Makefile.in: Fixed regeneration of libsanei.a when the object + files were changed. + * sanei/sanei_usb.c: Scanning for devices is now done in + sanei_usb_init instead of every time when sanei_usb_find_devices is + called. Also only devices that really exist are opened. These + changes fixe the slow detection of devices on systems using devfs or + old scanner drivers. + +2003-01-21 Karl Heinz Kremer <khk@khk.net> + + * doc/descriptions/epson.desc: Added "SCSI" to GT-6000 entry + +2003-01-21 Eddy De Greef <eddy_de_greef at tiscali dot be> + + * backend/mustek_pp_cis.c: compile warning fix and minor debug + message fixes. + * doc/sane-mustek_pp.man: updated supported scanner list and + typo fixes. + +2003-01-21 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Adjusted test for sparc64 to disable + SCSI generic v3. + +2003-01-20 Karl Heinz Kremer <khk@khk.net> + + * doc/descriptions/epson.desc: Replace :new with :alpha + +2003-01-19 Karl Heinz Kremer <khk@khk.net> + + * backend/epson_usb.c: Added USB product IDs for MFDs. + * doc/descriptions/epson.desc: Updated version number, added + entries for MFDs. + * doc/sane-epson.man: Added MFDs. + +-- snapshot 1.0.10-pre2 + +2003-01-18 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx_devices.c + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Removed + wrong "untested" flag from Mustek AE USB and Lexmark X70/X73 + scanners. + * po/sane-backends.de.po po/sane-backends.es.po po/sane-backends.fr.po + po/sane-backends.pt.po po/sane-backends.ru.po po/sane-backends.sv.po: + Regenerated. + +2003-01-17 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in include/sane/config.h.in sanei/sanei_scsi.c: + Disable the new Linux SG interface for sparc64 to work-around 32 bit + userland / 64 bit kernel problems. + * doc/descriptions/unsupported.desc: Added HP ScanJet 3500c, 3530c, + 3570c, 3570cxi, 5500C and Microtek ScanMaker 3800. Updated link for + ScanJet 4470C. + * TODO: Added links to hp4200 backend. Removed libusb entry, parport + compilation problems, SCSI on sparc64 issue, USB on BSD problems. + +2003-01-16 Frank Zago <fzago at austin dot rr dot com> + + * backend/leo.c doc/descriptions/leo.desc doc/leo/leo.txt: Added + another scsi string for the fs-1130. + +2003-01-16 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/microtek2.c backend/microtek2.h: Bugfix for the X12USL + (solved problems >600dpi), one for lineart mode with a 6400XL + and one for Scanmaker 5 (crashes at sendgamma). From Karsten Festag + <karsten.festag@gmx.de>. + +2003-01-15 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * sanei/sanei_usb.c: Don't call usb_clearhalt and usb_set_altinterface + to avoid errors on Mac OS X. + * doc/descriptions/unsupported.desc: Added HP 5490c. + +2003-01-14 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * NEWS: Updated list of backends. + * doc/sane-usb.man: Added remark about old name of usbfs. + * doc/descriptions/unsupported.desc: Added Artec Ultima 2000 (0x4001 + model), Canon CanoScan D660U, Compaq S200, Epson Perfection 660, + HP ScanJet 4570C, Microtek ScanMaker 3630. Updated ScanJet 5400C and + 5470C URLs, Canon FB1210 information. + +2003-01-13 Jochen Eisinger <jochen.eisinger@gmx.de> + + * backend/mustek_pp*, backend/Makefile: merged all mustek_pp + related files into one compile unit and removed illegal symbols + +2003-01-13 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/descriptions/unsupported.desc: Added HP ScanJet 2300C and various chipset + information for the unsupported Plustek devices + * doc/descriptions/plustek.desc: cleanup + + +---- FEATURE FREEZE FOR SANE 1.0.10 --- +-- snapshot 1.0.10-pre1 + +2003-01-12 Jochen Eisinger <jochen.eisinger@gmx.de> + + * doc/sane-mustek_pp.man, doc/descriptions/mustek_pp.desc, + backend/mustek_pp*: replaced the old mustek_pp backend with + version 12-alpha. This version fully supports CIS scanners but + removes support for 600dpi CCD scanners and the 300dpi CCD + support isn't yet working. In contrary to the old backend, this + version is based on information provided by Mustek. For now, + the backend exports lots of illegal symbols, this will be fixed + before code freeze. Also the .desc file is empty and will be updated + soon. + * AUTHORS: added Eddy De Greef who wrote the CIS hardware driver part + +2003-01-12 Abel Deuring <a.deuring@satzbau-gmbh.de> + * backend/sharp.*: fixed a segfault, when the SCAN command returned + an error; optional "relaxed" handling of transparency unit errors. + +2003-01-12 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/descriptions/plustek.desc: Removed the unsupported stuff + * doc/descriptions/unsupported.desc: Removed OpticPro 16B. + +2003-01-12 Michael Herder <crapsite@gmx.net> + + * doc/descriptions/artec_eplus48u.desc: Added new + models. + +2002-01-11 Jochen Eisinger <jochen.eisinger@gmx.de> + + * sanei/sanei_pa4s2.h: prepared sanei for use with fork()ing + backends + +2003-01-11 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/descriptions/plustek.desc: Update to reflect the currently + supported decvices. + * doc/descriptions/unsupported.desc: Added some Plustek devices. + CanoScan N1220U is now supported by the Plustek backend. + * doc/plustek: Added this directory to store various Plustek + information files. + +2003-01-11 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc + doc/descriptions-external/primax.desc: Some Primax scanners (and + clones) are now supported by the primax backend. + * backend/microtek.c backend/microtek2.conf backend/microtek2.h: + OPT_THRESHOLD fix. Avoid using "_" in option names. Set more + options in microtek2.conf to on by default. From Karsten Festag + <karsten.festag@gmx.de>. + * tools/sane-desc.c: Fixed overwrite warnings. Minor DBG message fixes. + Fixed priority handling (backend and manpage were overwritten even if + a model had a lower priority). + * tools/README: Updated sane-find-scanner and sane-desc.el entries. + * doc/sane-gt68xx.man doc/sane-mustek_usb.man: Updated status for the + BSDs. + +2003-01-10 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/sane-backends.pt.po: Even more Portuguese translations from + Pedro Morais <morais@inocam.com>. + * sanei/sanei_usb.c: Comment out resetep at sane_close. This + function sets th USB data toggle only on the host side. + * TODO: Removed microtek2 problem, updated Irix patch section and + Linux/Sparc section. + * NEWS: Updated for 1.0.10. + * backend/mustek.c: Removed hardcoded option size. + +2003-01-10 Gerhard Jaeger <gerhard@gjaeger.de> + + * TODO: Plustek backend now supports libusb, moved appropriate line + to done section. + +2003-01-10 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/sane-plustek.man: update to reflect version change + * doc/descriptions/plustek.desc: Added some Canon entries, status updates + * backend/plustek.conf updated options + * backend/plustek.c backend/plustek-devs.c backend/plustek-usb.c + backend/plustek-usbhw.c backend/plustek-pp.c + backend/plustek-usbmap.c backend/plustek-usbimg.c + backend/plustek-usbscan.c backend/plustek-usbshading.c + backend/plustek.h backend/plustek-share.h backend/plustek-usb.h + New version + support for libusb + +2003-01-09 Peter Fales <peter@fales-lorenz.net> + + * backend/dc210.c, backend/dc240.c: Fix compile failure + on OS/2. + +2003-01-09 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c + backend/gt68xx_high.c doc/sane-gt68xx.man + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: + Updated manpage and .desc concerning Lexmark X70. Updated manpage + concerning kernel 2.4.21-pre3 containing the 1-endpoint fix. Fixed + A3 USB resolution setting. Updated A3 USB margins (Pedro Morais + <morais@inocam.com>). Added detection of Genius Colorpage Vivid3x. + It's unknown if it works. Updated .desc file. Don't print calib line + warnings by default. + * doc/descriptions/microtek2.desc: Updated (From Karsten Festag + <karsten.festag@gmx.de>). + * po/Makefile.in po/sane-backends.pt.po: Added Portuguese translation + for the gt68xx backend (from Pedro Morais <morais@inocam.com>). + * po/sane-backends.de.po: Added some missing translations. Removed some + (wrong) fuzzy translations. + +2003-01-08 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * doc/descriptions/snapscan.desc: + Added entries for Acer/Benq 310U, 320U, 340U and + Mitsubishi Diamondview 650U + * backend/snapscan.c backend/snapscan.h backend/snapscan-scsi.c + backend/snapscan.conf: Backend version 1.4.18, added support for + Acer/Benq310U, fixed color correction for Agfa SnapScan 300 + +2003-01-08 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/hpsj5s.desc doc/descriptions-external/hp4200.desc: + Use uniform model names for HP scanners. + * doc/descriptions/unsupported.desc: Added Canon CanoScan D1250U2 + and HP ScanJet 4400C. + * po/artec_eplus48u.de.po po/epson.de.po po/epson.ru.po + po/epson.sv.po po/gt68xx.de.po po/matsushita.fr.po + po/matsushita.ru.po po/mustek.de.po po/mustek.ru.po + po/mustek_usb.de.po po/mustek_usb.ru.po po/plustek.de.po + po/plustek.es.po po/plustek.ru.po po/pnm.de.po po/pnm.ru.po + po/sceptre.fr.po po/sceptre.ru.po po/snapscan.de.po + po/snapscan.ru.po po/teco1.fr.po po/teco1.ru.po po/umax.de.po + po/umax.fr.po po/umax_pp.de.po po/umax_pp.fr.po po/umax_pp.ru.po + po/umax.ru.po: Remove per-backend translations. The translations + are now in the per-language sane-backends.??.po files. + * po/saneopts.de.po po/saneopts.es.po po/saneopts.fr.po po/saneopts.ru.po + po/saneopts.sv.po: Remove global saneopts translations. The translations + are now in the per-language sane-backends.??.po files. + * TODO: Updated .desc file, mapages, sanei_usb and OS/2 entries. Removed + entry about po files. + * po/Makefile.in: Remove sane-backends.pot from list of distributed + files. Add microtek2 files. + * backend/microtek2.c backend/microtek2.h: Improved support for + Scanmaker X12USL. Alpha support for Scanmaker 9800XL. Some bugfixes. + (From Karsten Festag <karsten.festag@gmx.de>). + * po/sane-backends.de.po: Added translation for microtek2 backend. + (From Karsten Festag <karsten.festag@gmx.de>). + +2003-01-07 Peter Fales <peter@fales-lorenz.net> + + * TODO: Marked dc210/dc240 items as "done" + +2003-01-07 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE> + * backend/umax.c: update to build 39 + +2003-01-07 Peter Fales <peter@fales-lorenz.net> + + * backend/dc210.c, backend/dc240.c: Use a more portable way + of sending "break" on serial ports. + +2003-01-07 Peter Kirchgessner <peter@kirchgessner.net> + + * doc/descriptions/hp.desc: Change HP ScanJet to ScanJet + +2003-01-07 Stéphane Voltz <svoltz@wanadoo.fr> + + * doc/sane-umax_pp.man: updates and fixes + * doc/descriptions/umax_pp.desc: change model form HP3200C to + Scanjet 3200C + +2003-01-07 Matthew Duggan <stauff1@users.sourceforge.net> + + * backend/canon_pp-dev.c: Improve/fix detection logic. + * doc/descriptions/canon_pp.desc: Bump version number. + +2003-01-06 Peter Fales <peter@fales-lorenz.net> + + * doc/descriptions/dc25.desc, doc/descriptions/dc210.desc, + doc/descriptions/dc240.desc, doc/descriptions/gphoto2.desc: + Update author information + + * backend/dc25.c: Fix compiler warning + + * backend/dc210.c, backend/dc240.c, backend/dc210.conf, + backend/dc240.conf, backend/gphoto2.conf, backend/dc25.conf: + Irix fixes from mailing list + +2003-01-05 Peter Fales <peter@fales-lorenz.net> + + * backend/dc25.c: Mailing list fix. Change = to == + dc25/dc20 tests. + +2003-01-05 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * TODO: Added link to Irix patches. Updated .desc section. + +2003-01-05 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp_low.c: small image quality improvement + * backend/umax_pp.conf: ppdev device is now default option + +2003-01-04 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * frontend/saned.c: Print version number. + * doc/descriptions/unsupported.desc: Added Genius HR7X Slim, + Visioneer 6200 and Onetouch 8920. + +2002-12-31 Karl Heinz Kremer <khk@khk.net> + + * backend/epson.c: Removed one '//' comment. + +2002-12-31 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/onetouch8600.desc: Added (from PROJECTS). + * doc/descriptions/unsupported.desc: Added list of (known) scanners + that are not supported by a SANE backend. There may be information + about them or even a standaalone program to which the entries point. + * PROJECTS: Removed projects that are now in the .desc files. + +2002-12-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * Makefile.in: Removed configure.os2. + * PROJECTS: Removed HP 2200c project (now supported by plustek + backend). Added "NIASH" keyword to hp3300backend. + * README.darwin: Removed comment about dynamic loading. Added + sm3600 and fork problems. + * acinclude.m4 aclocal.m4 config.guess config.sub configure + configure.in ltmain.sh: Update to latest libtool (1.4.3), config.sub + and config.gues. This should fix the build problems on MacOS X + concerning dynamic loading. + * backend/Makefile.in: Backends shouldn't be linked to sanei_config2 if + they aren't also linked to sanei_scsi. sanei_config2 needs + sanei_scsi. + * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_gt6801.c + backend/gt68xx_gt6816.c backend/gt68xx_high.c backend/gt68xx_high.h + backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES: Updated ScanExpress 2400 USB values. Added + implementation of gt6801 lamp control for CCD scanners. Added flag for + SE 2400 USB, added some quirks in gt68xx_gt6801.c. Fixed gt68xx_gt6801 + -> lamp control. Adjusted Plustek 1248U geometry and afe values. CCD + gross calibration changed: start with the default value from module + struct. Is faster now for most cases. Only 2.5 mm of calibration for + GT-6801 scanners. Added "afe" option for gt68xx.conf for selecting + default afe values. Removed AFE and exposure SANE options. Added + documentation for afe option in gt68xx.conf. New version: 1.0-35. + * doc/descriptions-external/hp4200.desc + doc/descriptions-external/hpoj.desc: Use Hewlett-Packard consitantly + (instead of HP). + * doc/descriptions-external/scanwit.desc + doc/descriptions-external/viceo.desc: Added description files for + scanwit and viceo backends. + * doc/descriptions-external/tevion9693usb.desc: Removed (now included). + * backend/test.c doc/descriptions/test.desc: Make sure that frontend bugs + concerning the select fd are detected. + * doc/sane-scsi.man: Minor formatting change. + * sanei/sanei_usb.c: Explicitely set first configuration. When claiming + the interface, use the interface number from bInterfaceNumber. + Explicitely set the alternative setting. When closing, call clear_halt, + and reset_ep, and release_interface explicitley. On errors in + write/read, call clear_halt. + * TODO: Added sm3600 issue, htmla manpage issue, sanei_scsi stuff. + Updated desc file, sanei_usb, and MacOSX entries. Deleted sane.tex + stuff (now TODO for SANE2). + +2002-12-28 Karl Heinz Kremer <khk@khk.net> + + * Added option to display short resolution list to. + +2002-12-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/sane-scsi.man: The "scsi ..." way of specifying devices is not + Linux-only. Some minor formatting updates. + * TODO: Added entries for "missing" scanners in desc files: snapscan + and epson. Added sanei_usb issues. Updated MacOS X and OS/2 porting + issues. + * README.darwin: Updated. + * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c + backend/gt68xx_high.c backend/gt68xx_high.h backend/gt68xx_low.c + backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES: + Coarse calibration for first scan only" is off by default now. Added gamma + table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. + Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore + (not necessary). Plustek 1248U: do linemode for every resolution, fix color + correction. Added comments for every Model member in gt68xx_devices. + Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for + inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, + at least it's detected. Added NEW marker to .desc. + * doc/descriptions/artec_eplus48u.desc doc/descriptions/hpsj5s.desc + doc/descriptions/teco2.desc doc/descriptions/teco3.desc: + Updated NEW! markers. + +2002-12-07 Abel Deuring <a.deuring@satzbau-gmbh.de> + * sanei/sanei_scsi.c: improved error handling + +2002-12-07 Karl Heinz Kremer <khk@khk.net> + + * backend/epson.c: Fixed problem with dropout color + +2002-12-06 Peter Kirchgessner <peter@kirchgessner.net> + + * backend/hp.h backend/hp.c backend/hp-scl.c backend/hp.conf + * doc/sane-hp.man doc/descriptions/hp.desc + Add option dumb-read to work + around problem with Buslogic SCSI driver + +2002-12-06 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure aclocal.m4 acinclude.m4: Fixed MacOS X LD_FLAGS bug. + * doc/sane-scsi.man: Removed link to ACard problem. + * doc/sane.tex: Updated contact information. + * LEVEL2: Removed. Contents is either in the SANE2 standard or in + the SANE2 API TODO. + * Makefile.in doc/Makefile.in: Removed LEVEL2. + +2002-12-05 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/sane-mustek.man doc/sane-mustek_usb.man + doc/descriptions/mustek.desc doc/descriptions/mustek_usb.desc: + Updated links. + * backend/test.c po/sane-backends.de.po: Minor spelling and translation + fixes. + +2002-12-04 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/epson_scsi.c backend/sm3600.c: Move config.h include to the + top of the include list to avoid compilation errors on platforms + not defining u_char. Added AIX lalloca check. + * aclocal.m4 acinclude.m4 configure configure.in + include/sane/config.h.in: Cleanup. Added some missing quotes. Better + structure and comments. Tried to keep similar tests in one group. + Moved more complicated tests to acinclude.m4. Added explicit test for + build and host system type. When checking for programs, used $EXEEXT + (hopefully fixes OS/2 gettext misdetection). Removed obsolete + macros. Removed PTAL check. Used autoconf for asm/io.h check. + Shortened --enable-foo output and formatted it correctly. Trans- + lations were installed even if --disable-translations was set. Don't + test for msgcat anymore. Tell why translations aren't installed. Used + autoconf 2.5 syntax for AC_OUTPUT and AC_CONFIG_FILES. Make + sane-config executable. Print flags and installation directories + near the end of configure output. + * po/Makefile.in: Added autoconf comment, removed MSGCAT variable. + * backend/dll.c doc/sane-dll.man doc/descriptions/dll.desc: Ignore + comments that are in the same line as the backend entries. Minor + manpage fixes. Intented according GNU coding standards. + * configure.os2: Removed. No longer necessary. + +2002-12-04 Matthew Duggan <stauff1@users.sourceforge.net> + * backend/canon_pp-dev.c: Don't compare firmware version numbers - + multiple versions do actually exist. + * doc/descriptions/canon_pp.desc: Bump version number. + +2002-12-03 Peter Fales <peter@fales-lorenz.net> + + * backend/gphoto2.c: Don't display the "low resolution" option when + taking a picture, because it doesn't actually do anything. + +2002-12-02 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/Makefile.in po/README sane-backends.de.po sane-backends.es.po + sane-backends.fr.po sane-backends.ru.po sane-backends.sv.po: + Use only one file of translated messages per language. Merged + all backend files. Uses UTF-8 everywhere. Updated all files + from the marked source code. + +2002-12-01 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp.c: unmarked from SANE_I18N 2 options names + +2002-12-01 Rene Rebe <rene.rebe@gmx.net> + * backend/avision.h backend/avision.c backend/avision.conf + doc/descriptions/avision.desc: updated the Avision backend - + including auto-generated .desc file listing all devices + also present in the avision.c device-list. + * doc/descriptions/avision.desc: syntax fix + * doc/sane-avision.man: updated to reflect the current backend + development. + +2002-12-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in backend/dll.c: Add dynamic loading support + for MacOS X/Darwin (from Peter O'Gorman <peter@pogma.com>). + * TODO: Added sp15c inclusion and low-level buffer prints. Removed + avision warning, hpsj5s freeze, hp/libusb, and manpages issues. + Updated MacOS X list. + * configure configure.in backend/Makefile.in: Use libtool -module + when linking shared libs that will be loaded dynamically. + +2002-11-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/Makefile.in po/epson.sv.po po/saneopts.sv.po: Added Swedish + translation (from Dennis Björklund <db@zigo.dhs.org>). + +2002-11-29 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in backend/canon630u.c backend/dll.c + backend/gt68xx.c backend/mustek_usb.c backend/net.c backend/pnm.c + backend/test.c backend/umax1220u.c backend/v4l.c doc/Makefile.in + include/sane/config.h.in tools/sane-desc.c: Fixed PACKAGE_VERSION + breakage. PACKAGE_VERSION was redefined by autoconf 2.5 with a + different meaning. Use PACKAGE_STRING instead. + * backend/mustek.c doc/descriptions/mustek.desc + doc/mustek/mustek.CHANGES: PACKAGE_VERSION fix. Fixed debug message + in do_stop: really print exit status of reader process. + * doc/sane-usb.man: PACKAGEVERSION fix. Removed HP exception. Added + MacOS X. + * doc/gamma4scanimage.man doc/sane-artec_eplus48u.man + doc/sane-config.man doc/sane-find-scanner.man doc/sane-gt68xx.man + doc/sane-mustek.man doc/sane-mustek_usb.man doc/sane.man + doc/saned.man doc/scanimage.man: Added missing quotes around + PACKAGEVERSION + * doc/sane-abaton.man doc/sane-agfafocus.man doc/sane-apple.man + doc/sane-artec.man doc/sane-as6e.man doc/sane-avision.man + doc/sane-bh.man doc/sane-canon.man doc/sane-canon630u.man + doc/sane-canon_pp.man doc/sane-coolscan.man doc/sane-coolscan2.man + doc/sane-dc210.man doc/sane-dc240.man doc/sane-dc25.man + doc/sane-dll.man doc/sane-dmc.man doc/sane-epson.man + doc/sane-fujitsu.man doc/sane-gphoto2.man doc/sane-hp.man + doc/sane-hpsj5s.man doc/sane-leo.man doc/sane-matsushita.man + doc/sane-microtek.man doc/sane-microtek2.man doc/sane-mustek_pp.man + doc/sane-nec.man doc/sane-net.man doc/sane-pie.man doc/sane-pint.man + doc/sane-plustek.man doc/sane-pnm.man doc/sane-qcam.man + doc/sane-ricoh.man doc/sane-s9036.man doc/sane-sceptre.man + doc/sane-scsi.man doc/sane-sharp.man doc/sane-sm3600.man + doc/sane-snapscan.man doc/sane-sp15c.man doc/sane-st400.man + doc/sane-tamarack.man doc/sane-teco1.man doc/sane-teco2.man + doc/sane-teco3.man doc/sane-test.man doc/sane-umax.man + doc/sane-umax1220u.man doc/sane-umax_pp.man doc/sane-v4l.man: + Changed "-" to "\-" in .SH NAME section (required by man 7 man). + Added PACKAGEVERSION and "SANE Scanner Access Now Easy" to header. + +2002-11-29 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE> + + * frontend/stiff.c: added fclose(icc_file) + +2002-11-25 Peter Kirchgessner <peter@kirchgessner.net> + + * backend/hp-device.h backend/hp-accessor.c backend/hp-scl.c + backend/hp.c backend/hp-device.c backend/hp-option.c + backend/hp.h backend/hp.conf backend/Makefile.in + doc/sane-hp.man doc/descriptions/hp.desc + Added libusb support for hp-backend + +2002-11-25 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * PROJECTS: Removed projects for scanners that are now supported + by the plustek backend. Removed lhii backend (dead?). Added more + details for other projects. Added 5400C / 5470C project. + +2002-11-23 Rene Rebe <rene.rebe@gmx.net> + + * backend/avision.h backend/avision.c backend/avision.conf + doc/sane-avision.man: updated the Avisin backend to my todays + snapshot. It know handles more scanners as well as ADF and A3 + size devices. + +2002-11-23 Max Vorobiev <pcwizard@yandex.ru> + * backend/hpsj5s.c: Removed default port probing. + +2002-11-22 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/sane.man: Formatting fixes. Updates some backend entries and + sane-find-scanner. Some clarifications. + * doc/scanimage.man: Use "--option arg" format for all options. + Other formatting fixes. + * doc/gamma4scanimage.man doc/sane-config.man doc/sane-find-scanner.man + doc/saned.man: Formatting updates. + +2002-11-22 Michael Herder <crapsite at gmx.net> + + Fixed header in artec_eplus48u.de.po. + *po/artec_eplus48u.de.po + +2002-11-21 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/mustek_usb.desc doc/sane-mustek_usb.man + doc/mustek_usb/mustek_usb.CHANGES doc/mustek_usb/mustek_usb.TODO: + Minor manpage fixes. Added links to similar backends. More + information about non-Linux OS. + * doc/sane-mustek.man: Minor fixes. Added links to ther backends + providing support for Mustek scanners. + * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_gt6816.c + backend/gt68xx_low.c backend/gt68xx_low.h doc/sane-gt68xx.man + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: + Changed 150 to 200 dpi for Mustek BearPaw 2400 TA. Fixed warnings + in gt68xx_low.c. Used DBG instead of XDBG ing gt68xx_low.c. + Minor manpage fixes. Added man page links to other backends. + gt68xx_low.h: Fixed __FUNCTION__ bug on non-gcc compilers. + Added more details about the BSDs in the manpage. Fixed color order + for ScanExpress A3 USB. + * TODO: Removed tevion9693usb and umax1220u warnings entries. Added + avsion warnings. Little bit of restructuring. + +2002-11-21 Michael Herder <crapsite at gmx.net> + + Added german translation for artec_eplus48u backend. + *po/artec_eplus48u.de.po + *po/Makefile.in + +2002-11-20 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/Makefile.in: Don't generate symlinks for libsane.so/.a, the files + are installed anyway. Fix symlink creation when only static libraries + are created. + +2002-11-20 Michael Herder <crapsite at gmx.net> + + Added artec_eplus48u backend for the scanner Artec E+ 48U and + re-badged models like Tevion/Medion MD 9693, Medion MD 9705 and + Trust Easy Webscan 19200. + * backend/Makefile.in backend/dll.conf backend/artec_eplus48u.c + backend/artec_eplus48u.conf backend/artec_eplus48u.h + * doc/.cvsignore doc/Makefile.in doc/sane-artec_eplus48u.man doc/sane.man + doc/descriptions/artec_eplus48u.desc + * AUTHORS: Updated concerning artec_eplus48u. + +2002-11-19 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/sane-usb.man: Added quick start section. New structure/order. + Added list of backends that don't use sanei_usb. Added headers + and fixed \- bug. + * doc/sane-find-scanner.man: Minor adjustments, added headers, fixed + \- bug. + +2002-11-18 Frank Zago <fzago at austin dot rr dot com> + + * backend/umax-usb.c: the usb support for the umax 2200 wasn't + using the correct sanei USB API, which broke the support for that + scanner. Also fixed a couple warnings and a typo. + * backend/sceptre.c backend/teco1.c backend/teco3.c + backend/matsushita.c backend/leo.c: fixed hexdump() declaration. + * backend/dll.c: fixed some warnings. + +2002-11-07 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp_low.c: disable test facility + +2002-11-17 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * TODO: Added manpage issues and hpsj5s freeze problem. Removed canon.c + model problem. + * doc/Makefile.in: Added variable @PACKAGEVERSION@ for usage in + manpages. + +2002-11-14 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/sane-mustek_usb.man doc/sane-usb.man: Fixed wrong .TH headers. + +2002-11-13 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in acinclude.m4 aclocal.m4 + include/sane/config.h.in: Fix compilation on Tru64 by readding + the sys/bitypes.h work-around. Minimum autoconf version is 2.50 now. + * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c + backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h doc/sane-gt68xx.man + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES po/gt68xx.de.po: + Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger + <gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. + Backend status is BETA now. + +2002-11-13 Ulrich Deiters <ukd@xenon.pc.uni-koeln.de> + + * modified the Canon SCSI backend (now version 1.10): + * backend/canon.c, canon-scsi.c: Added support of focus control for + the FS2710 film scanner. + backend/canon-sane.c: Set handler_arg in sanei_scsi_open() calls + to zero to avoid crashes with Mandrake Linux 9.0 + +2002-11-12 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE> + + * added several russion translations to directory po. + The translations have been created by + Vitaly Lipatov <LAV@VL3143.spb.edu> + +2002-11-07 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp.c: revert a experimental change that went into + cvs by mistake. + * po/umax_pp.de.po: switch to iso-8858-1 + +2002-11-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.h + backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES po/Makefile.in po/gt68xx.de.po: Changed + option titles and descriptions to make them better readable. Added + translation markers for all options. Added German translation for + backend options. Updated manpage and .desc file concerning scanner + status. Added untested flag for Mustek ScanEpress A3 USB and Lexmark + X73. + * backend/mustek.c doc/sane-mustek.man doc/descriptions/mustek.desc + doc/mustek/mustek.CHANGES: Upload linear gamma table for Pro models + if custom gamma is off instead of uploading the composed gamma table. + That avoids applying gamm twice. Minor man page update. + +2002-11-05 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp.c backend/umax_pp_mid.c : OS/2 compile fix, indent + correction + +2002-11-03 Karl Heinz Kremer <khk@khk.net> + + * sanei/sanei_usb.c: Use endpoint address with direction information + instead of the pipe reference. This caused problems with Darwin + systems. + +2002-11-03 Karl Heinz Kremer <khk@khk.net> + + * backend/epson.c: Full support for libusb + +2002-11-03 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * README configure.in configure po/Makefile.in po/README: + Translations are now enabled by default if the gettext tools are + found. Use msgcat if available. Don't update the .po files + automatically. + * TODO: Added entries about canon.c model extraction bug, and sanei_usb + issue. Updated entries about MAcOS X support. Removed po files entry. + +2002-10-31 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Print installation directories. + * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c + backend/gt68xx_low.c backend/gt68xx_low.h doc/gt68xx/gt68xx.CHANGES: + Faster AFE calibration. Minor fixes. New version: 1.0-28. + +2002-10-31 Stéphane Voltz <svoltz@wanadoo.fr> + + * backend/umax_pp.c backend/umax_pp.h backend/umax_pp_low.h + backend/umax_pp_low.c tools/umax_pp.c: add UTA detection, + version number updates + + +2002-10-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/dll.conf: Removed commented out gt68xx entry. + * PROJECTS: Updated viceo entry. + +2002-10-27 Peter Fales <peter@fales-lorenz.net> + + * configure, acinclude.m4, aclocal.m4 - Remove checks for + specific version numbers of gphoto2 - that's not good for long + term maintenance, and the API has settled down enough that all + recent versions (both releases and CVS) are workable for SANE. + It is still necessary to specify --with-gphoto2 if you want to + use the gphoto2 backend. + +2002-10-27 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Added a warning if sysconfdir is set to + /usr/etc. + * backend/test.c: Explicitely close the pipe and wait until + reader_process is killed. + +2002-10-25 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/Makefile.in backend/dll.conf backend/gt68xx.c + backend/gt68xx.conf backend/gt68xx.h backend/gt68xx_devices.c + backend/gt68xx_generic.c backend/gt68xx_generic.h + backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h + backend/gt68xx_gt6816.c backend/gt68xx_gt6816.h backend/gt68xx_high.c + backend/gt68xx_high.h backend/gt68xx_low.c backend/gt68xx_low.h + backend/gt68xx_mid.c backend/gt68xx_mid.h + backend/gt68xx_shm_channel.c backend/gt68xx_shm_channel.h: + Added gt68xx backend for scanners based on the Grandtech GT-6801 + and GT-8616 chips like The Mustek BearPaw CU, and TA scanners + and some Artec Ultima 2000 clones. + * doc/.cvsignore doc/Makefile.in doc/sane-gt68xx.man doc/sane.man + doc/descriptions/gt68xx.desc doc/descriptions-external/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES: Added documentation for gt68xx backend. + * AUTHORS PROJECTS TODO: Updated concerning gt68xx. + * Makefile.in backend/Makefile.in doc/Makefile.in: Added some missing + files to DISTFILES. + +2002-10-24 Peter Fales <peter@fales-lorenz.net> + + * backend/gphoto2.c: Improve checks for values specified in config + file and generate errors when invalid values are specified. + +2002-10-24 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Warnings enabled again. Used extra version + -cvs. + +Older entries can be found in ChangeLog-1.0.9. |