summaryrefslogtreecommitdiff
path: root/backend/canon_dr.c
diff options
context:
space:
mode:
Diffstat (limited to 'backend/canon_dr.c')
-rw-r--r--backend/canon_dr.c1191
1 files changed, 824 insertions, 367 deletions
diff --git a/backend/canon_dr.c b/backend/canon_dr.c
index 594aab2..15dcc59 100644
--- a/backend/canon_dr.c
+++ b/backend/canon_dr.c
@@ -276,10 +276,39 @@
- DR-2580C pads the backside of duplex scans
v40 2012-11-01, MAN
- initial DR-9050C, DR-7550C, DR-6050C and DR-3010C support
- v41 2013-07-31, MAN
+ v41 2013-07-31, MAN (SANE 1.0.24)
- initial P-208 and P-215 support
- bug fix for calibration of scanners with duplex_offset
- allow duplex_offset to be controlled from config file
+ v42 2013-12-09, MAN
+ - initial DR-G1100 support
+ - add support for paper sensors (P-215 & P-208)
+ - add initial support for card reader (P-215)
+ - removed unused var from do_scsi_cmd()
+ v43 2014-03-13, MAN
+ - initial DR-M140 support
+ - add extra_status config and code
+ - split status code into do_usb_status
+ - fix copy_line margin offset
+ - add new color interlacing modes and code
+ - comment out ssm2
+ - add timestamp to do_usb_cmd
+ v44 2014-03-26, MAN
+ - buffermode support for machines with ssm2 command
+ - DR-M140 needs always_op=0
+ v45 2014-03-29, MAN
+ - dropout support for machines with ssm2 command
+ - doublefeed support for machines with ssm2 command
+ v46 2014-04-09, MAN
+ - split debug level 30 into two levels
+ - simplify jpeg ifdefs
+ - add support for DR-M160
+ v47 2014-07-07, MAN
+ - initial DR-G1130 support
+ v48 2014-08-06, MAN
+ - set another unknown byte in buffermode for ssm2
+ - add another gettimeofday call at end of do_usb_cmd
+ - don't print 0 length line in hexdump
SANE FLOW DIAGRAM
@@ -317,6 +346,7 @@
#include <ctype.h> /*isspace*/
#include <math.h> /*tan*/
#include <unistd.h> /*usleep*/
+#include <sys/time.h> /*gettimeofday*/
#include "../include/sane/sanei_backend.h"
#include "../include/sane/sanei_scsi.h"
@@ -328,7 +358,7 @@
#include "canon_dr.h"
#define DEBUG 1
-#define BUILD 41
+#define BUILD 48
/* values for SANE_DEBUG_CANON_DR env var:
- errors 5
@@ -336,15 +366,25 @@
- function detail 15
- get/setopt cmds 20
- scsi/usb trace 25
- - scsi/usb detail 30
+ - scsi/usb writes 30
+ - scsi/usb reads 31
- useless noise 35
*/
/* ------------------------------------------------------------------------- */
+/* if JPEG support is not enabled in sane.h, we setup our own defines */
+#ifndef SANE_FRAME_JPEG
+#define SANE_FRAME_JPEG 0x0B
+#define SANE_JPEG_DISABLED 1
+#endif
+/* ------------------------------------------------------------------------- */
#define STRING_FLATBED SANE_I18N("Flatbed")
#define STRING_ADFFRONT SANE_I18N("ADF Front")
#define STRING_ADFBACK SANE_I18N("ADF Back")
#define STRING_ADFDUPLEX SANE_I18N("ADF Duplex")
+#define STRING_CARDFRONT SANE_I18N("Card Front")
+#define STRING_CARDBACK SANE_I18N("Card Back")
+#define STRING_CARDDUPLEX SANE_I18N("Card Duplex")
#define STRING_LINEART SANE_VALUE_SCAN_MODE_LINEART
#define STRING_HALFTONE SANE_VALUE_SCAN_MODE_HALFTONE
@@ -366,6 +406,8 @@ static int global_buffer_size;
static int global_buffer_size_default = 2 * 1024 * 1024;
static int global_padded_read;
static int global_padded_read_default = 0;
+static int global_extra_status;
+static int global_extra_status_default = 0;
static int global_duplex_offset;
static int global_duplex_offset_default = 0;
static char global_vendor_name[9];
@@ -543,6 +585,32 @@ sane_get_devices (const SANE_Device *** device_list, SANE_Bool local_only)
global_padded_read = buf;
}
+ /* EXTRA STATUS: we clamp to 0 or 1 */
+ else if (!strncmp (lp, "extra-status", 12) && isspace (lp[12])) {
+
+ int buf;
+ lp += 12;
+ lp = sanei_config_skip_whitespace (lp);
+ buf = atoi (lp);
+
+ if (buf < 0) {
+ DBG (5, "sane_get_devices: config option \"extra-status\" "
+ "(%d) is < 0, ignoring!\n", buf);
+ continue;
+ }
+
+ if (buf > 1) {
+ DBG (5, "sane_get_devices: config option \"extra-status\" "
+ "(%d) is > 1, ignoring!\n", buf);
+ continue;
+ }
+
+ DBG (15, "sane_get_devices: setting \"extra-status\" to %d\n",
+ buf);
+
+ global_extra_status = buf;
+ }
+
/* DUPLEXOFFSET: < 1200 */
else if (!strncmp (lp, "duplex-offset", 13) && isspace (lp[13])) {
@@ -733,6 +801,7 @@ attach_one (const char *device_name, int connType)
/* config file settings */
s->buffer_size = global_buffer_size;
s->padded_read = global_padded_read;
+ s->extra_status = global_extra_status;
s->duplex_offset = global_duplex_offset;
/* copy the device name */
@@ -1160,6 +1229,9 @@ init_model (struct scanner *s)
s->reverse_by_mode[MODE_GRAYSCALE] = 0;
s->reverse_by_mode[MODE_COLOR] = 0;
+ s->color_interlace[SIDE_FRONT] = COLOR_INTERLACE_RGB;
+ s->color_interlace[SIDE_BACK] = COLOR_INTERLACE_RGB;
+
s->always_op = 1;
s->has_df = 1;
s->has_btc = 1;
@@ -1191,9 +1263,7 @@ init_model (struct scanner *s)
/* specific settings missing from vpd */
if (strstr (s->model_name,"DR-9080")
|| strstr (s->model_name,"DR-7580")){
-#ifdef SANE_FRAME_JPEG
s->has_comp_JPEG = 1;
-#endif
s->rgb_format = 2;
}
@@ -1203,7 +1273,10 @@ init_model (struct scanner *s)
else if (strstr (s->model_name,"DR-9050")
|| strstr (s->model_name,"DR-7550")
- || strstr (s->model_name,"DR-6050")){
+ || strstr (s->model_name,"DR-6050")
+ || strstr (s->model_name,"DR-G1100")
+ || strstr (s->model_name,"DR-G1130")
+ ){
/*missing*/
s->std_res_x[DPI_100]=1;
@@ -1367,6 +1440,7 @@ init_model (struct scanner *s)
s->has_ssm_pay_head_len = 1;
s->ppl_mod = 8;
s->ccal_version = 3;
+ s->can_read_sensors = 1;
}
else if (strstr (s->model_name, "P-215")) {
@@ -1382,6 +1456,90 @@ init_model (struct scanner *s)
s->has_ssm_pay_head_len = 1;
s->ppl_mod = 8;
s->ccal_version = 3;
+ s->can_read_sensors = 1;
+ s->has_card = 1;
+ }
+
+ else if (strstr (s->model_name,"DR-M160")){
+
+ /*missing*/
+ s->std_res_x[DPI_100]=1;
+ s->std_res_y[DPI_100]=1;
+ s->std_res_x[DPI_150]=1;
+ s->std_res_y[DPI_150]=1;
+ s->std_res_x[DPI_200]=1;
+ s->std_res_y[DPI_200]=1;
+ s->std_res_x[DPI_300]=1;
+ s->std_res_y[DPI_300]=1;
+ s->std_res_x[DPI_400]=1;
+ s->std_res_y[DPI_400]=1;
+ s->std_res_x[DPI_600]=1;
+ s->std_res_y[DPI_600]=1;
+
+ s->has_comp_JPEG = 1;
+ s->rgb_format = 1;
+ s->can_color = 1;
+ s->has_df_ultra = 1;
+
+ s->color_inter_by_res[DPI_100] = COLOR_INTERLACE_GBR;
+ s->color_inter_by_res[DPI_150] = COLOR_INTERLACE_GBR;
+ s->color_inter_by_res[DPI_200] = COLOR_INTERLACE_BRG;
+ s->color_inter_by_res[DPI_400] = COLOR_INTERLACE_GBR;
+
+ /*weirdness*/
+ s->always_op = 0;
+ s->fixed_width = 1;
+ s->invert_tly = 1;
+ s->can_write_panel = 0;
+ s->has_ssm = 0;
+ s->has_ssm2 = 1;
+ s->duplex_interlace = DUPLEX_INTERLACE_FFBB;
+ s->duplex_offset_side = SIDE_FRONT;
+
+ /*lies*/
+ s->can_halftone=0;
+ s->can_monochrome=0;
+ }
+
+ else if (strstr (s->model_name,"DR-M140")){
+
+ /*missing*/
+ s->std_res_x[DPI_100]=1;
+ s->std_res_y[DPI_100]=1;
+ s->std_res_x[DPI_150]=1;
+ s->std_res_y[DPI_150]=1;
+ s->std_res_x[DPI_200]=1;
+ s->std_res_y[DPI_200]=1;
+ s->std_res_x[DPI_300]=1;
+ s->std_res_y[DPI_300]=1;
+ s->std_res_x[DPI_400]=1;
+ s->std_res_y[DPI_400]=1;
+ s->std_res_x[DPI_600]=1;
+ s->std_res_y[DPI_600]=1;
+
+ s->has_comp_JPEG = 1;
+ s->rgb_format = 1;
+ s->can_color = 1;
+ s->has_df_ultra = 1;
+
+ s->color_inter_by_res[DPI_100] = COLOR_INTERLACE_GBR;
+ s->color_inter_by_res[DPI_150] = COLOR_INTERLACE_GBR;
+ s->color_inter_by_res[DPI_200] = COLOR_INTERLACE_BRG;
+ s->color_inter_by_res[DPI_400] = COLOR_INTERLACE_GBR;
+
+ /*weirdness*/
+ s->always_op = 0;
+ s->fixed_width = 1;
+ s->invert_tly = 1;
+ s->can_write_panel = 0;
+ s->has_ssm = 0;
+ s->has_ssm2 = 1;
+ s->duplex_interlace = DUPLEX_INTERLACE_FFBB;
+ s->duplex_offset_side = SIDE_BACK;
+
+ /*lies*/
+ s->can_halftone=0;
+ s->can_monochrome=0;
}
DBG (10, "init_model: finish\n");
@@ -1435,6 +1593,8 @@ init_user (struct scanner *s)
s->u.source = SOURCE_FLATBED;
else if(s->has_adf)
s->u.source = SOURCE_ADF_FRONT;
+ else if(s->has_card)
+ s->u.source = SOURCE_CARD_FRONT;
/* scan mode */
if(s->can_monochrome)
@@ -1628,6 +1788,16 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
s->source_list[i++]=STRING_ADFDUPLEX;
}
}
+ if(s->has_card){
+ s->source_list[i++]=STRING_CARDFRONT;
+
+ if(s->has_back){
+ s->source_list[i++]=STRING_CARDBACK;
+ }
+ if(s->has_duplex){
+ s->source_list[i++]=STRING_CARDDUPLEX;
+ }
+ }
s->source_list[i]=NULL;
opt->name = SANE_NAME_SCAN_SOURCE;
@@ -1841,7 +2011,7 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
opt->constraint_type = SANE_CONSTRAINT_RANGE;
opt->constraint.range = &s->paper_x_range;
- if(s->has_adf){
+ if(s->has_adf || s->has_card){
opt->cap = SANE_CAP_SOFT_SELECT | SANE_CAP_SOFT_DETECT;
if(s->u.source == SOURCE_FLATBED){
opt->cap |= SANE_CAP_INACTIVE;
@@ -1868,7 +2038,7 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
opt->constraint_type = SANE_CONSTRAINT_RANGE;
opt->constraint.range = &s->paper_y_range;
- if(s->has_adf){
+ if(s->has_adf || s->has_card){
opt->cap = SANE_CAP_SOFT_SELECT | SANE_CAP_SOFT_DETECT;
if(s->u.source == SOURCE_FLATBED){
opt->cap |= SANE_CAP_INACTIVE;
@@ -1985,7 +2155,9 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
s->compress_list[i++]=STRING_NONE;
if(s->has_comp_JPEG){
+#ifndef SANE_JPEG_DISABLED
s->compress_list[i++]=STRING_JPEG;
+#endif
}
s->compress_list[i]=NULL;
@@ -2306,6 +2478,28 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
opt->cap = SANE_CAP_INACTIVE;
}
+ if(option==OPT_ADF_LOADED){
+ opt->name = "adf-loaded";
+ opt->title = "ADF Loaded";
+ opt->desc = "Paper available in ADF input hopper";
+ opt->type = SANE_TYPE_BOOL;
+ opt->unit = SANE_UNIT_NONE;
+ opt->cap = SANE_CAP_SOFT_DETECT | SANE_CAP_HARD_SELECT | SANE_CAP_ADVANCED;
+ if(!s->can_read_sensors)
+ opt->cap = SANE_CAP_INACTIVE;
+ }
+
+ if(option==OPT_CARD_LOADED){
+ opt->name = "card-loaded";
+ opt->title = "Card Loaded";
+ opt->desc = "Paper available in card reader";
+ opt->type = SANE_TYPE_BOOL;
+ opt->unit = SANE_UNIT_NONE;
+ opt->cap = SANE_CAP_SOFT_DETECT | SANE_CAP_HARD_SELECT | SANE_CAP_ADVANCED;
+ if(!s->can_read_sensors || !s->has_card)
+ opt->cap = SANE_CAP_INACTIVE;
+ }
+
return opt;
}
@@ -2382,6 +2576,15 @@ sane_control_option (SANE_Handle handle, SANE_Int option,
else if(s->u.source == SOURCE_ADF_DUPLEX){
strcpy (val, STRING_ADFDUPLEX);
}
+ else if(s->u.source == SOURCE_CARD_FRONT){
+ strcpy (val, STRING_CARDFRONT);
+ }
+ else if(s->u.source == SOURCE_CARD_BACK){
+ strcpy (val, STRING_CARDBACK);
+ }
+ else if(s->u.source == SOURCE_CARD_DUPLEX){
+ strcpy (val, STRING_CARDDUPLEX);
+ }
return SANE_STATUS_GOOD;
case OPT_MODE:
@@ -2581,6 +2784,15 @@ sane_control_option (SANE_Handle handle, SANE_Int option,
*val_p = s->panel_counter;
return ret;
+ case OPT_ADF_LOADED:
+ ret = read_sensors(s,OPT_ADF_LOADED);
+ *val_p = s->sensor_adf_loaded;
+ return ret;
+
+ case OPT_CARD_LOADED:
+ ret = read_sensors(s,OPT_CARD_LOADED);
+ *val_p = s->sensor_card_loaded;
+ return ret;
}
}
else if (action == SANE_ACTION_SET_VALUE) {
@@ -2629,6 +2841,15 @@ sane_control_option (SANE_Handle handle, SANE_Int option,
else if (!strcmp (val, STRING_ADFDUPLEX)) {
tmp = SOURCE_ADF_DUPLEX;
}
+ else if (!strcmp (val, STRING_CARDFRONT)) {
+ tmp = SOURCE_CARD_FRONT;
+ }
+ else if (!strcmp (val, STRING_CARDBACK)) {
+ tmp = SOURCE_CARD_BACK;
+ }
+ else if (!strcmp (val, STRING_CARDDUPLEX)) {
+ tmp = SOURCE_CARD_DUPLEX;
+ }
else{
tmp = SOURCE_FLATBED;
}
@@ -2837,54 +3058,85 @@ ssm_buffer (struct scanner *s)
{
SANE_Status ret = SANE_STATUS_GOOD;
- unsigned char cmd[SET_SCAN_MODE_len];
- size_t cmdLen = SET_SCAN_MODE_len;
-
- unsigned char out[SSM_PAY_len];
- size_t outLen = SSM_PAY_len;
-
DBG (10, "ssm_buffer: start\n");
- if(!s->has_ssm){
- DBG (10, "ssm_buffer: unsupported\n");
- return ret;
+ if(s->has_ssm){
+
+ unsigned char cmd[SET_SCAN_MODE_len];
+ size_t cmdLen = SET_SCAN_MODE_len;
+
+ unsigned char out[SSM_PAY_len];
+ size_t outLen = SSM_PAY_len;
+
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
+ set_SSM_pf(cmd, 1);
+ set_SSM_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+ if(s->has_ssm_pay_head_len){
+ set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
+ }
+ set_SSM_page_code(out, SM_pc_buffer);
+ set_SSM_page_len(out, SSM_PAGE_len);
+
+ if(s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_CARD_DUPLEX){
+ set_SSM_BUFF_duplex(out, 1);
+ }
+ if(s->s.source == SOURCE_FLATBED){
+ set_SSM_BUFF_fb(out, 1);
+ }
+ else if(s->s.source >= SOURCE_CARD_FRONT){
+ set_SSM_BUFF_card(out, 1);
+ }
+ if(s->buffermode){
+ set_SSM_BUFF_async(out, 1);
+ }
+ if(0){
+ set_SSM_BUFF_ald(out, 1);
+ }
+ if(0){
+ set_SSM_BUFF_unk(out,1);
+ }
+
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
}
- memset(cmd,0,cmdLen);
- set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
- set_SSM_pf(cmd, 1);
- set_SSM_pay_len(cmd, outLen);
+ else if(s->has_ssm2){
- memset(out,0,outLen);
- if(s->has_ssm_pay_head_len){
- set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
+ unsigned char cmd[SET_SCAN_MODE2_len];
+ size_t cmdLen = SET_SCAN_MODE2_len;
+
+ unsigned char out[SSM2_PAY_len];
+ size_t outLen = SSM2_PAY_len;
+
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE2_code);
+ set_SSM2_page_code(cmd, SM2_pc_buffer);
+ set_SSM2_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+ set_SSM2_BUFF_unk(out, !s->buffermode);
+ set_SSM2_BUFF_unk2(out, 0x40);
+ set_SSM2_BUFF_sync(out, !s->buffermode);
+
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
}
- set_SSM_page_code(out, SM_pc_buffer);
- set_SSM_page_len(out, SSM_PAGE_len);
- if(s->s.source == SOURCE_ADF_DUPLEX){
- set_SSM_BUFF_duplex(out, 1);
- }
- else if(s->s.source == SOURCE_FLATBED){
- set_SSM_BUFF_fb(out, 1);
- }
- if(s->buffermode){
- set_SSM_BUFF_async(out, 1);
- }
- if(0){
- set_SSM_BUFF_ald(out, 1);
- }
- if(0){
- set_SSM_BUFF_unk(out,1);
+ else{
+ DBG (10, "ssm_buffer: unsupported\n");
}
- ret = do_cmd (
- s, 1, 0,
- cmd, cmdLen,
- out, outLen,
- NULL, NULL
- );
-
DBG (10, "ssm_buffer: finish\n");
return ret;
@@ -2895,57 +3147,118 @@ ssm_df (struct scanner *s)
{
SANE_Status ret = SANE_STATUS_GOOD;
- unsigned char cmd[SET_SCAN_MODE_len];
- size_t cmdLen = SET_SCAN_MODE_len;
-
- unsigned char out[SSM_PAY_len];
- size_t outLen = SSM_PAY_len;
-
DBG (10, "ssm_df: start\n");
-
- if(!s->has_ssm || !s->has_df){
+
+ if(!s->has_df){
DBG (10, "ssm_df: unsupported, finishing\n");
return ret;
}
+
+ if(s->has_ssm){
- memset(cmd,0,cmdLen);
- set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
- set_SSM_pf(cmd, 1);
- set_SSM_pay_len(cmd, outLen);
+ unsigned char cmd[SET_SCAN_MODE_len];
+ size_t cmdLen = SET_SCAN_MODE_len;
+
+ unsigned char out[SSM_PAY_len];
+ size_t outLen = SSM_PAY_len;
+
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
+ set_SSM_pf(cmd, 1);
+ set_SSM_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+ if(s->has_ssm_pay_head_len){
+ set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
+ }
+ set_SSM_page_code(out, SM_pc_df);
+ set_SSM_page_len(out, SSM_PAGE_len);
+
+ /* deskew by roller */
+ if(s->rollerdeskew){
+ set_SSM_DF_deskew_roll(out, 1);
+ }
+
+ /* staple detection */
+ if(s->stapledetect){
+ set_SSM_DF_staple(out, 1);
+ }
+
+ /* thickness */
+ if(s->df_thickness){
+ set_SSM_DF_thick(out, 1);
+ }
+
+ /* length */
+ if(s->df_length){
+ set_SSM_DF_len(out, 1);
+ }
+
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
- memset(out,0,outLen);
- if(s->has_ssm_pay_head_len){
- set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
}
- set_SSM_page_code(out, SM_pc_df);
- set_SSM_page_len(out, SSM_PAGE_len);
- /* deskew by roller */
- if(s->rollerdeskew){
- set_SSM_DF_deskew_roll(out, 1);
- }
+ else if(s->has_ssm2){
+
+ unsigned char cmd[SET_SCAN_MODE2_len];
+ size_t cmdLen = SET_SCAN_MODE2_len;
- /* staple detection */
- if(s->stapledetect){
- set_SSM_DF_staple(out, 1);
- }
+ unsigned char out[SSM2_PAY_len];
+ size_t outLen = SSM2_PAY_len;
+
+ /* send ultrasonic offsets first */
+ if(s->df_thickness && s->has_df_ultra){
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE2_code);
+ set_SSM2_page_code(cmd, SM2_pc_ultra);
+ set_SSM2_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+ set_SSM2_ULTRA_top(out, 0);
+ set_SSM2_ULTRA_bot(out, 0);
+
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
+ }
- /* thickness */
- if(s->df_thickness){
- set_SSM_DF_thick(out, 1);
- }
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE2_code);
+ set_SSM2_page_code(cmd, SM2_pc_df);
+ set_SSM2_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+
+ /* thickness */
+ if(s->df_thickness){
+ set_SSM2_DF_thick(out, 1);
+ }
+
+ /* length */
+ if(s->df_length){
+ set_SSM2_DF_len(out, 1);
+ }
- /* length */
- if(s->df_length){
- set_SSM_DF_len(out, 1);
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
+
}
- ret = do_cmd (
- s, 1, 0,
- cmd, cmdLen,
- out, outLen,
- NULL, NULL
- );
+ else{
+ DBG (10, "ssm_df: unsupported\n");
+ }
DBG (10, "ssm_df: finish\n");
@@ -2957,140 +3270,203 @@ ssm_do (struct scanner *s)
{
SANE_Status ret = SANE_STATUS_GOOD;
- unsigned char cmd[SET_SCAN_MODE_len];
- size_t cmdLen = SET_SCAN_MODE_len;
+ DBG (10, "ssm_do: start\n");
- unsigned char out[SSM_PAY_len];
- size_t outLen = SSM_PAY_len;
+ if(!s->can_color){
+ DBG (10, "ssm_do: unsupported, finishing\n");
+ return ret;
+ }
+
+ if(s->has_ssm){
- DBG (10, "ssm_do: start\n");
+ unsigned char cmd[SET_SCAN_MODE_len];
+ size_t cmdLen = SET_SCAN_MODE_len;
+
+ unsigned char out[SSM_PAY_len];
+ size_t outLen = SSM_PAY_len;
+
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
+ set_SSM_pf(cmd, 1);
+ set_SSM_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+ if(s->has_ssm_pay_head_len){
+ set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
+ }
+ set_SSM_page_code(out, SM_pc_dropout);
+ set_SSM_page_len(out, SSM_PAGE_len);
+
+ set_SSM_DO_unk1(out, 0x03);
+
+ switch(s->dropout_color_f){
+ case COLOR_RED:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_do(out,SSM_DO_red);
+ break;
+ case COLOR_GREEN:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_do(out,SSM_DO_green);
+ break;
+ case COLOR_BLUE:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_do(out,SSM_DO_blue);
+ break;
+ case COLOR_EN_RED:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_en(out,SSM_DO_red);
+ break;
+ case COLOR_EN_GREEN:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_en(out,SSM_DO_green);
+ break;
+ case COLOR_EN_BLUE:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_f_en(out,SSM_DO_blue);
+ break;
+ }
+
+ switch(s->dropout_color_b){
+ case COLOR_RED:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_do(out,SSM_DO_red);
+ break;
+ case COLOR_GREEN:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_do(out,SSM_DO_green);
+ break;
+ case COLOR_BLUE:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_do(out,SSM_DO_blue);
+ break;
+ case COLOR_EN_RED:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_en(out,SSM_DO_red);
+ break;
+ case COLOR_EN_GREEN:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_en(out,SSM_DO_green);
+ break;
+ case COLOR_EN_BLUE:
+ set_SSM_DO_unk2(out, 0x05);
+ set_SSM_DO_b_en(out,SSM_DO_blue);
+ break;
+ }
+
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
- if(!s->has_ssm || !s->can_color){
- DBG (10, "ssm_do: unsupported, finishing\n");
- return ret;
}
- memset(cmd,0,cmdLen);
- set_SCSI_opcode(cmd, SET_SCAN_MODE_code);
- set_SSM_pf(cmd, 1);
- set_SSM_pay_len(cmd, outLen);
-
- memset(out,0,outLen);
- if(s->has_ssm_pay_head_len){
- set_SSM_pay_head_len(out, SSM_PAY_HEAD_len);
- }
- set_SSM_page_code(out, SM_pc_dropout);
- set_SSM_page_len(out, SSM_PAGE_len);
+ else if(s->has_ssm2){
- set_SSM_DO_unk1(out, 0x03);
+ unsigned char cmd[SET_SCAN_MODE2_len];
+ size_t cmdLen = SET_SCAN_MODE2_len;
+
+ unsigned char out[SSM2_PAY_len];
+ size_t outLen = SSM2_PAY_len;
+
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, SET_SCAN_MODE2_code);
+ set_SSM2_page_code(cmd, SM2_pc_dropout);
+ set_SSM2_pay_len(cmd, outLen);
+
+ memset(out,0,outLen);
+
+ switch(s->dropout_color_f){
+ case COLOR_RED:
+ set_SSM2_DO_do(out,SSM_DO_red);
+ break;
+ case COLOR_GREEN:
+ set_SSM2_DO_do(out,SSM_DO_green);
+ break;
+ case COLOR_BLUE:
+ set_SSM2_DO_do(out,SSM_DO_blue);
+ break;
+ case COLOR_EN_RED:
+ set_SSM2_DO_en(out,SSM_DO_red);
+ break;
+ case COLOR_EN_GREEN:
+ set_SSM2_DO_en(out,SSM_DO_green);
+ break;
+ case COLOR_EN_BLUE:
+ set_SSM2_DO_en(out,SSM_DO_blue);
+ break;
+ }
- switch(s->dropout_color_f){
- case COLOR_RED:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_do(out,SSM_DO_red);
- break;
- case COLOR_GREEN:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_do(out,SSM_DO_green);
- break;
- case COLOR_BLUE:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_do(out,SSM_DO_blue);
- break;
- case COLOR_EN_RED:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_en(out,SSM_DO_red);
- break;
- case COLOR_EN_GREEN:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_en(out,SSM_DO_green);
- break;
- case COLOR_EN_BLUE:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_f_en(out,SSM_DO_blue);
- break;
+ ret = do_cmd (
+ s, 1, 0,
+ cmd, cmdLen,
+ out, outLen,
+ NULL, NULL
+ );
}
- switch(s->dropout_color_b){
- case COLOR_RED:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_do(out,SSM_DO_red);
- break;
- case COLOR_GREEN:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_do(out,SSM_DO_green);
- break;
- case COLOR_BLUE:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_do(out,SSM_DO_blue);
- break;
- case COLOR_EN_RED:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_en(out,SSM_DO_red);
- break;
- case COLOR_EN_GREEN:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_en(out,SSM_DO_green);
- break;
- case COLOR_EN_BLUE:
- set_SSM_DO_unk2(out, 0x05);
- set_SSM_DO_b_en(out,SSM_DO_blue);
- break;
+ else{
+ DBG (10, "ssm_do: unsupported\n");
}
- ret = do_cmd (
- s, 1, 0,
- cmd, cmdLen,
- out, outLen,
- NULL, NULL
- );
-
DBG (10, "ssm_do: finish\n");
return ret;
}
-/* used by recent scanners. meaning of payloads unknown */
static SANE_Status
-ssm2 (struct scanner *s)
+read_sensors(struct scanner *s,SANE_Int option)
{
- SANE_Status ret = SANE_STATUS_GOOD;
-
- unsigned char cmd[SET_SCAN_MODE2_len];
- size_t cmdLen = SET_SCAN_MODE2_len;
+ SANE_Status ret=SANE_STATUS_GOOD;
- unsigned char out[SSM2_PAY_len];
- size_t outLen = SSM2_PAY_len;
+ unsigned char cmd[READ_len];
+ size_t cmdLen = READ_len;
- DBG (10, "ssm2:start\n");
+ unsigned char in[R_SENSORS_len];
+ size_t inLen = R_SENSORS_len;
- if(!s->has_ssm2){
- DBG (10, "ssm2: unsupported, finishing\n");
+ DBG (10, "read_sensors: start %d\n", option);
+
+ if(!s->can_read_sensors){
+ DBG (10, "read_sensors: unsupported, finishing\n");
return ret;
}
- memset(cmd,0,cmdLen);
- set_SCSI_opcode(cmd, SET_SCAN_MODE2_code);
- /*FIXME: set this correctly */
- set_SSM2_page_code(cmd, 0);
- set_SSM2_pay_len(cmd, outLen);
+ /* only run this if frontend has already read the last time we got it */
+ /* or if we don't care for such bookkeeping (private use) */
+ if (!option || !s->sensors_read[option-OPT_ADF_LOADED]) {
- /*FIXME: set these correctly */
- memset(out,0,outLen);
- set_SSM2_unk(out, 0);
- set_SSM2_unk2(out, 0);
- set_SSM2_unk3(out, 0);
+ DBG (15, "read_sensors: running\n");
- /*
- ret = do_cmd (
+ memset(cmd,0,cmdLen);
+ set_SCSI_opcode(cmd, READ_code);
+ set_R_datatype_code (cmd, SR_datatype_sensors);
+ set_R_xfer_length (cmd, inLen);
+
+ ret = do_cmd (
s, 1, 0,
cmd, cmdLen,
- out, outLen,
- NULL, NULL
- );*/
+ NULL, 0,
+ in, &inLen
+ );
+
+ if (ret == SANE_STATUS_GOOD || ret == SANE_STATUS_EOF) {
+ /*set flags indicating there is data to read*/
+ memset(s->sensors_read,1,sizeof(s->sensors_read));
- DBG (10, "ssm2: finish\n");
+ s->sensor_adf_loaded = get_R_SENSORS_adf(in);
+ s->sensor_card_loaded = get_R_SENSORS_card(in);
+ ret = SANE_STATUS_GOOD;
+ }
+ }
+
+ if(option)
+ s->sensors_read[option-OPT_ADF_LOADED] = 0;
+
+ DBG (10, "read_sensors: finish\n");
+
return ret;
}
@@ -3112,9 +3488,9 @@ read_panel(struct scanner *s,SANE_Int option)
return ret;
}
- /* only run this if frontend has read previous value
- * or if the caller does not want the data stored */
- if (!option || !s->hw_read[option-OPT_START]) {
+ /* only run this if frontend has already read the last time we got it */
+ /* or if we don't care for such bookkeeping (private use) */
+ if (!option || !s->panel_read[option-OPT_START]) {
DBG (15, "read_panel: running\n");
@@ -3132,8 +3508,7 @@ read_panel(struct scanner *s,SANE_Int option)
if (ret == SANE_STATUS_GOOD || ret == SANE_STATUS_EOF) {
/*set flags indicating there is data to read*/
- if(option)
- memset(s->hw_read,1,sizeof(s->hw_read));
+ memset(s->panel_read,1,sizeof(s->panel_read));
s->panel_start = get_R_PANEL_start(in);
s->panel_stop = get_R_PANEL_stop(in);
@@ -3143,12 +3518,13 @@ read_panel(struct scanner *s,SANE_Int option)
s->panel_bypass_mode = get_R_PANEL_bypass_mode(in);
s->panel_enable_led = get_R_PANEL_enable_led(in);
s->panel_counter = get_R_PANEL_counter(in);
+
ret = SANE_STATUS_GOOD;
}
}
if(option)
- s->hw_read[option-OPT_START] = 0;
+ s->panel_read[option-OPT_START] = 0;
DBG (10, "read_panel: finish %d\n",s->panel_counter);
@@ -3294,14 +3670,12 @@ update_params(struct scanner *s, int calib)
/* round down to pixel boundary for some scanners */
s->u.width -= s->u.width % s->ppl_mod;
-#ifdef SANE_FRAME_JPEG
/* jpeg requires 8x8 squares */
if(s->compress == COMP_JPEG && s->u.mode >= MODE_GRAYSCALE){
s->u.format = SANE_FRAME_JPEG;
s->u.width -= s->u.width % 8;
s->u.height -= s->u.height % 8;
}
-#endif
s->u.Bpl = s->u.width * s->u.bpp / 8;
s->u.valid_Bpl = s->u.Bpl;
@@ -3396,7 +3770,8 @@ update_params(struct scanner *s, int calib)
}
/* some scanners need longer scans because front/back is offset */
- if(s->u.source == SOURCE_ADF_DUPLEX && s->duplex_offset && !calib)
+ if((s->u.source == SOURCE_ADF_DUPLEX || s->u.source == SOURCE_CARD_DUPLEX)
+ && s->duplex_offset && !calib)
s->s.height = (s->u.br_y-s->u.tl_y+s->duplex_offset) * s->u.dpi_y / 1200;
/* round lines up to even number */
@@ -3421,7 +3796,7 @@ update_params(struct scanner *s, int calib)
else{
memcpy(&s->i,&s->u,sizeof(struct img_params));
/*dumb scanners pad the top of front page in duplex*/
- if(s->i.source == SOURCE_ADF_DUPLEX)
+ if(s->i.source == SOURCE_ADF_DUPLEX || s->i.source == SOURCE_CARD_DUPLEX)
s->i.skip_lines[s->duplex_offset_side] = s->duplex_offset * s->i.dpi_y / 1200;
}
@@ -3485,7 +3860,7 @@ sane_start (SANE_Handle handle)
if(!s->started){
/* load side marker */
- if(s->u.source == SOURCE_ADF_BACK){
+ if(s->u.source == SOURCE_ADF_BACK || s->u.source == SOURCE_CARD_BACK){
s->side = SIDE_BACK;
}
else{
@@ -3549,7 +3924,7 @@ sane_start (SANE_Handle handle)
goto errors;
}
- /* buffer/duplex/ald command */
+ /* buffer/duplex/ald/fb/card command */
ret = ssm_buffer(s);
if (ret != SANE_STATUS_GOOD) {
DBG (5, "sane_start: ERROR: cannot ssm buffer\n");
@@ -3591,18 +3966,21 @@ sane_start (SANE_Handle handle)
goto errors;
}
- /* grab next page */
- ret = object_position (s, SANE_TRUE);
- if (ret != SANE_STATUS_GOOD) {
- DBG (5, "sane_start: ERROR: cannot load page\n");
- goto errors;
- }
-
- /* wait for scanner to finish load */
- ret = wait_scanner (s);
- if (ret != SANE_STATUS_GOOD) {
- DBG (5, "sane_start: ERROR: cannot wait scanner\n");
- goto errors;
+ /* card reader dislikes op? */
+ if(s->s.source < SOURCE_CARD_FRONT){
+ /* grab next page */
+ ret = object_position (s, SANE_TRUE);
+ if (ret != SANE_STATUS_GOOD) {
+ DBG (5, "sane_start: ERROR: cannot load page\n");
+ goto errors;
+ }
+
+ /* wait for scanner to finish load */
+ ret = wait_scanner (s);
+ if (ret != SANE_STATUS_GOOD) {
+ DBG (5, "sane_start: ERROR: cannot wait scanner\n");
+ goto errors;
+ }
}
/* start scanning */
@@ -3619,7 +3997,7 @@ sane_start (SANE_Handle handle)
else{
/* duplex needs to switch sides */
- if(s->s.source == SOURCE_ADF_DUPLEX){
+ if(s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_CARD_DUPLEX){
s->side = !s->side;
}
@@ -3635,7 +4013,7 @@ sane_start (SANE_Handle handle)
/* otherwise buffered back page will be lost */
/* ingest paper with adf (no-op for fb) */
/* dont call object pos or scan on back side of duplex scan */
- if(s->side == SIDE_FRONT || s->s.source == SOURCE_ADF_BACK){
+ if(s->side == SIDE_FRONT || s->s.source == SOURCE_ADF_BACK || s->s.source == SOURCE_CARD_BACK){
/* clean scan params for new scan */
ret = clean_params(s);
@@ -3694,9 +4072,7 @@ sane_start (SANE_Handle handle)
* API has no way to inform the frontend of this,
* so we block and buffer. yuck */
if( (s->swdeskew || s->swdespeck || s->swcrop)
-#ifdef SANE_FRAME_JPEG
&& s->s.format != SANE_FRAME_JPEG
-#endif
){
/* get image */
@@ -3772,23 +4148,26 @@ clean_params (struct scanner *s)
s->s.bytes_tot[1]=0;
/* store the number of front bytes */
- if ( s->u.source != SOURCE_ADF_BACK )
+ if ( s->u.source != SOURCE_ADF_BACK && s->u.source != SOURCE_CARD_BACK )
s->u.bytes_tot[SIDE_FRONT] = s->u.Bpl * s->u.height;
- if ( s->i.source != SOURCE_ADF_BACK )
+ if ( s->i.source != SOURCE_ADF_BACK && s->i.source != SOURCE_CARD_BACK )
s->i.bytes_tot[SIDE_FRONT] = s->i.Bpl * s->i.height;
- if ( s->s.source != SOURCE_ADF_BACK )
+ if ( s->s.source != SOURCE_ADF_BACK && s->s.source != SOURCE_CARD_BACK )
s->s.bytes_tot[SIDE_FRONT] = s->s.Bpl * s->s.height;
/* store the number of back bytes */
- if ( s->u.source == SOURCE_ADF_DUPLEX || s->u.source == SOURCE_ADF_BACK )
+ if ( s->u.source == SOURCE_ADF_DUPLEX || s->u.source == SOURCE_ADF_BACK
+ || s->u.source == SOURCE_CARD_DUPLEX || s->u.source == SOURCE_CARD_BACK )
s->u.bytes_tot[SIDE_BACK] = s->u.Bpl * s->u.height;
- if ( s->i.source == SOURCE_ADF_DUPLEX || s->i.source == SOURCE_ADF_BACK )
+ if ( s->i.source == SOURCE_ADF_DUPLEX || s->i.source == SOURCE_ADF_BACK
+ || s->i.source == SOURCE_CARD_DUPLEX || s->i.source == SOURCE_CARD_BACK )
s->i.bytes_tot[SIDE_BACK] = s->i.Bpl * s->i.height;
- if ( s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_ADF_BACK )
+ if ( s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_ADF_BACK
+ || s->s.source == SOURCE_CARD_DUPLEX || s->s.source == SOURCE_CARD_BACK )
s->s.bytes_tot[SIDE_BACK] = s->s.Bpl * s->s.height;
DBG (10, "clean_params: finish\n");
@@ -3863,7 +4242,7 @@ set_window (struct scanner *s)
set_WPDB_wdblen(header, SW_desc_len);
/* init the window block */
- if (s->s.source == SOURCE_ADF_BACK) {
+ if (s->s.source == SOURCE_ADF_BACK || s->s.source == SOURCE_CARD_BACK) {
set_WD_wid (desc1, WD_wid_back);
}
else{
@@ -3933,13 +4312,11 @@ set_window (struct scanner *s)
set_WD_compress_type(desc1, COMP_NONE);
set_WD_compress_arg(desc1, 0);
-#ifdef SANE_FRAME_JPEG
/* some scanners support jpeg image compression, for color/gs only */
if(s->s.format == SANE_FRAME_JPEG){
set_WD_compress_type(desc1, COMP_JPEG);
set_WD_compress_arg(desc1, s->compress_arg);
}
-#endif
/*build the command*/
memset(cmd,0,cmdLen);
@@ -3953,7 +4330,7 @@ set_window (struct scanner *s)
NULL, NULL
);
- if (!ret && s->s.source == SOURCE_ADF_DUPLEX) {
+ if (!ret && (s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_CARD_DUPLEX)) {
set_WD_wid (desc1, WD_wid_back);
ret = do_cmd (
s, 1, 0,
@@ -4037,9 +4414,9 @@ start_scan (struct scanner *s, int type)
out[1] = type;
}
- if (s->s.source != SOURCE_ADF_DUPLEX) {
+ if (s->s.source != SOURCE_ADF_DUPLEX && s->s.source != SOURCE_CARD_DUPLEX) {
outLen--;
- if(s->s.source == SOURCE_ADF_BACK) {
+ if(s->s.source == SOURCE_ADF_BACK || s->s.source == SOURCE_CARD_BACK) {
out[0] = WD_wid_back;
}
}
@@ -4100,7 +4477,7 @@ sane_read (SANE_Handle handle, SANE_Byte * buf, SANE_Int max_len, SANE_Int * len
s->reading = 1;
/* double width pnm interlacing */
- if(s->s.source == SOURCE_ADF_DUPLEX
+ if((s->s.source == SOURCE_ADF_DUPLEX || s->s.source == SOURCE_CARD_DUPLEX)
&& s->s.format <= SANE_FRAME_RGB
&& s->duplex_interlace != DUPLEX_INTERLACE_NONE
){
@@ -4225,7 +4602,6 @@ read_from_scanner(struct scanner *s, int side, int exact)
inLen = 0;
}
-#ifdef SANE_FRAME_JPEG
/* this is jpeg data, we need to fix the missing image size */
if(s->s.format == SANE_FRAME_JPEG){
@@ -4275,7 +4651,6 @@ read_from_scanner(struct scanner *s, int side, int exact)
}
}
}
-#endif
/*scanner may have sent more data than we asked for, chop it*/
if(inLen > remain){
@@ -4301,37 +4676,32 @@ read_from_scanner(struct scanner *s, int side, int exact)
if(ret == SANE_STATUS_EOF){
- switch (s->s.format){
+ /* this is jpeg data, we need to change the total size */
+ if(s->s.format == SANE_FRAME_JPEG){
+ s->s.bytes_tot[side] = s->s.bytes_sent[side];
+ s->i.bytes_tot[side] = s->i.bytes_sent[side];
+ s->u.bytes_tot[side] = s->i.bytes_sent[side];
+ }
-#ifdef SANE_FRAME_JPEG
- /* this is jpeg data, we need to change the total size */
- case SANE_FRAME_JPEG:
- s->s.bytes_tot[side] = s->s.bytes_sent[side];
- s->i.bytes_tot[side] = s->i.bytes_sent[side];
- s->u.bytes_tot[side] = s->i.bytes_sent[side];
- break;
-#endif
-
- /* this is non-jpeg data, fill remainder, change rx'd size */
- default:
+ /* this is non-jpeg data, fill remainder, change rx'd size */
+ else{
- DBG (15, "read_from_scanner: eof: %d %d\n", s->i.bytes_tot[side], s->i.bytes_sent[side]);
+ DBG (15, "read_from_scanner: eof: %d %d\n", s->i.bytes_tot[side], s->i.bytes_sent[side]);
- /* clone the last line repeatedly until the end */
- while(s->i.bytes_tot[side] > s->i.bytes_sent[side]){
- memcpy(
- s->buffers[side]+s->i.bytes_sent[side]-s->i.Bpl,
- s->buffers[side]+s->i.bytes_sent[side],
- s->i.Bpl
- );
- s->i.bytes_sent[side] += s->i.Bpl;
- }
+ /* clone the last line repeatedly until the end */
+ while(s->i.bytes_tot[side] > s->i.bytes_sent[side]){
+ memcpy(
+ s->buffers[side]+s->i.bytes_sent[side]-s->i.Bpl,
+ s->buffers[side]+s->i.bytes_sent[side],
+ s->i.Bpl
+ );
+ s->i.bytes_sent[side] += s->i.Bpl;
+ }
- DBG (15, "read_from_scanner: eof2: %d %d\n", s->i.bytes_tot[side], s->i.bytes_sent[side]);
+ DBG (15, "read_from_scanner: eof2: %d %d\n", s->i.bytes_tot[side], s->i.bytes_sent[side]);
- /* pretend we got all the data from scanner */
- s->s.bytes_sent[side] = s->s.bytes_tot[side];
- break;
+ /* pretend we got all the data from scanner */
+ s->s.bytes_sent[side] = s->s.bytes_tot[side];
}
s->i.eof[side] = 1;
@@ -4441,57 +4811,52 @@ read_from_scanner_duplex(struct scanner *s,int exact)
if(ret == SANE_STATUS_EOF){
- switch (s->s.format){
-
-#ifdef SANE_FRAME_JPEG
- /* this is jpeg data, we need to change the total size */
- case SANE_FRAME_JPEG:
- s->s.bytes_tot[SIDE_FRONT] = s->s.bytes_sent[SIDE_FRONT];
- s->s.bytes_tot[SIDE_BACK] = s->s.bytes_sent[SIDE_BACK];
- s->i.bytes_tot[SIDE_FRONT] = s->i.bytes_sent[SIDE_FRONT];
- s->i.bytes_tot[SIDE_BACK] = s->i.bytes_sent[SIDE_BACK];
- s->u.bytes_tot[SIDE_FRONT] = s->i.bytes_sent[SIDE_FRONT];
- s->u.bytes_tot[SIDE_BACK] = s->i.bytes_sent[SIDE_BACK];
- break;
-#endif
-
- /* this is non-jpeg data, fill remainder, change rx'd size */
- default:
+ /* this is jpeg data, we need to change the total size */
+ if(s->s.format == SANE_FRAME_JPEG){
+ s->s.bytes_tot[SIDE_FRONT] = s->s.bytes_sent[SIDE_FRONT];
+ s->s.bytes_tot[SIDE_BACK] = s->s.bytes_sent[SIDE_BACK];
+ s->i.bytes_tot[SIDE_FRONT] = s->i.bytes_sent[SIDE_FRONT];
+ s->i.bytes_tot[SIDE_BACK] = s->i.bytes_sent[SIDE_BACK];
+ s->u.bytes_tot[SIDE_FRONT] = s->i.bytes_sent[SIDE_FRONT];
+ s->u.bytes_tot[SIDE_BACK] = s->i.bytes_sent[SIDE_BACK];
+ }
- DBG (15, "read_from_scanner_duplex: eof: %d %d %d %d\n",
- s->i.bytes_tot[SIDE_FRONT], s->i.bytes_sent[SIDE_FRONT],
- s->i.bytes_tot[SIDE_BACK], s->i.bytes_sent[SIDE_BACK]
- );
+ /* this is non-jpeg data, fill remainder, change rx'd size */
+ else{
- /* clone the last line repeatedly until the end */
- while(s->i.bytes_tot[SIDE_FRONT] > s->i.bytes_sent[SIDE_FRONT]){
- memcpy(
- s->buffers[SIDE_FRONT]+s->i.bytes_sent[SIDE_FRONT]-s->i.Bpl,
- s->buffers[SIDE_FRONT]+s->i.bytes_sent[SIDE_FRONT],
- s->i.Bpl
- );
- s->i.bytes_sent[SIDE_FRONT] += s->i.Bpl;
- }
+ DBG (15, "read_from_scanner_duplex: eof: %d %d %d %d\n",
+ s->i.bytes_tot[SIDE_FRONT], s->i.bytes_sent[SIDE_FRONT],
+ s->i.bytes_tot[SIDE_BACK], s->i.bytes_sent[SIDE_BACK]
+ );
- /* clone the last line repeatedly until the end */
- while(s->i.bytes_tot[SIDE_BACK] > s->i.bytes_sent[SIDE_BACK]){
- memcpy(
- s->buffers[SIDE_BACK]+s->i.bytes_sent[SIDE_BACK]-s->i.Bpl,
- s->buffers[SIDE_BACK]+s->i.bytes_sent[SIDE_BACK],
- s->i.Bpl
- );
- s->i.bytes_sent[SIDE_BACK] += s->i.Bpl;
- }
+ /* clone the last line repeatedly until the end */
+ while(s->i.bytes_tot[SIDE_FRONT] > s->i.bytes_sent[SIDE_FRONT]){
+ memcpy(
+ s->buffers[SIDE_FRONT]+s->i.bytes_sent[SIDE_FRONT]-s->i.Bpl,
+ s->buffers[SIDE_FRONT]+s->i.bytes_sent[SIDE_FRONT],
+ s->i.Bpl
+ );
+ s->i.bytes_sent[SIDE_FRONT] += s->i.Bpl;
+ }
- DBG (15, "read_from_scanner_duplex: eof2: %d %d %d %d\n",
- s->i.bytes_tot[SIDE_FRONT], s->i.bytes_sent[SIDE_FRONT],
- s->i.bytes_tot[SIDE_BACK], s->i.bytes_sent[SIDE_BACK]
+ /* clone the last line repeatedly until the end */
+ while(s->i.bytes_tot[SIDE_BACK] > s->i.bytes_sent[SIDE_BACK]){
+ memcpy(
+ s->buffers[SIDE_BACK]+s->i.bytes_sent[SIDE_BACK]-s->i.Bpl,
+ s->buffers[SIDE_BACK]+s->i.bytes_sent[SIDE_BACK],
+ s->i.Bpl
);
+ s->i.bytes_sent[SIDE_BACK] += s->i.Bpl;
+ }
- /* pretend we got all the data from scanner */
- s->s.bytes_sent[SIDE_FRONT] = s->s.bytes_tot[SIDE_FRONT];
- s->s.bytes_sent[SIDE_BACK] = s->s.bytes_tot[SIDE_BACK];
- break;
+ DBG (15, "read_from_scanner_duplex: eof2: %d %d %d %d\n",
+ s->i.bytes_tot[SIDE_FRONT], s->i.bytes_sent[SIDE_FRONT],
+ s->i.bytes_tot[SIDE_BACK], s->i.bytes_sent[SIDE_BACK]
+ );
+
+ /* pretend we got all the data from scanner */
+ s->s.bytes_sent[SIDE_FRONT] = s->s.bytes_tot[SIDE_FRONT];
+ s->s.bytes_sent[SIDE_BACK] = s->s.bytes_tot[SIDE_BACK];
}
s->i.eof[SIDE_FRONT] = 1;
@@ -4522,6 +4887,7 @@ copy_simplex(struct scanner *s, unsigned char * buf, int len, int side)
unsigned char * line = NULL;
int line_next = 0;
+ int inter = get_color_inter(s,side,s->s.dpi_x);
/* jpeg data should not pass thru this function, so copy and bail out */
if(s->s.format > SANE_FRAME_RGB){
@@ -4592,7 +4958,7 @@ copy_simplex(struct scanner *s, unsigned char * buf, int len, int side)
else if (s->s.format == SANE_FRAME_RGB){
- switch (s->color_interlace[side]) {
+ switch (inter) {
/* scanner returns color data as bgrbgr... */
case COLOR_INTERLACE_BGR:
@@ -4604,6 +4970,26 @@ copy_simplex(struct scanner *s, unsigned char * buf, int len, int side)
}
break;
+ /* scanner returns color data as gbrgbr... */
+ case COLOR_INTERLACE_GBR:
+ DBG (17, "copy_simplex: color, GBR\n");
+ for (j=0; j<pwidth; j++){
+ line[line_next++] = buf[i+j*3+2];
+ line[line_next++] = buf[i+j*3];
+ line[line_next++] = buf[i+j*3+1];
+ }
+ break;
+
+ /* scanner returns color data as brgbrg... */
+ case COLOR_INTERLACE_BRG:
+ DBG (17, "copy_simplex: color, BRG\n");
+ for (j=0; j<pwidth; j++){
+ line[line_next++] = buf[i+j*3+1];
+ line[line_next++] = buf[i+j*3+2];
+ line[line_next++] = buf[i+j*3];
+ }
+ break;
+
/* one line has the following format: RRR...rrrGGG...gggBBB...bbb */
case COLOR_INTERLACE_RRGGBB:
DBG (17, "copy_simplex: color, RRGGBB\n");
@@ -4768,7 +5154,7 @@ copy_duplex(struct scanner *s, unsigned char * buf, int len)
}
}
- /* no scanners use this? */
+ /* full line of front, then full line of back */
else if(s->duplex_interlace == DUPLEX_INTERLACE_FFBB){
for(i=0; i<len; i+=dbwidth){
memcpy(front+flen,buf+i,bwidth);
@@ -4877,7 +5263,7 @@ copy_line(struct scanner *s, unsigned char * buff, int side)
/* scan is wider than user wanted, skip some pixels on left side */
if(s->i.width != s->s.width){
- offset = ((s->valid_x-s->i.page_x) / 2 + s->i.tl_x) * s->i.dpi_x/1200*3;
+ offset = ((s->valid_x-s->i.page_x) / 2 + s->i.tl_x) * s->i.dpi_x/1200;
}
/* change mode, store line in buffer */
@@ -4905,7 +5291,7 @@ copy_line(struct scanner *s, unsigned char * buff, int side)
/*loop over output bits*/
for(j=0;j<8;j++){
- int source = (offset+i)*24 + j*3;
+ int source = offset*3 + i*24 + j*3;
if( (line[source] + line[source+1] + line[source+2]) < thresh ){
curr |= 1 << (7-j);
}
@@ -5967,6 +6353,7 @@ default_globals(void)
{
global_buffer_size = global_buffer_size_default;
global_padded_read = global_padded_read_default;
+ global_extra_status = global_extra_status_default;
global_duplex_offset = global_duplex_offset_default;
global_vendor_name[0] = 0;
global_model_name[0] = 0;
@@ -6252,7 +6639,6 @@ do_scsi_cmd(struct scanner *s, int runRS, int shortTime,
)
{
int ret;
- size_t actLen = 0;
/*shut up compiler*/
runRS=runRS;
@@ -6270,7 +6656,6 @@ do_scsi_cmd(struct scanner *s, int runRS, int shortTime,
if (inBuff && inLen){
DBG(25, "in: reading %d bytes\n", (int)*inLen);
memset(inBuff,0,*inLen);
- actLen = *inLen;
}
ret = sanei_scsi_cmd2(s->fd, cmdBuff, cmdLen, outBuff, outLen, inBuff, inLen);
@@ -6285,7 +6670,7 @@ do_scsi_cmd(struct scanner *s, int runRS, int shortTime,
DBG(25, "in: short read, remainder %lu bytes\n", (u_long)s->rs_info);
*inLen -= s->rs_info;
}
- hexdump(30, "in: <<", inBuff, *inLen);
+ hexdump(31, "in: <<", inBuff, *inLen);
DBG(25, "in: read %d bytes\n", (int)*inLen);
}
@@ -6319,16 +6704,15 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
unsigned char * inBuffer = NULL;
int inTimeout = 0;
- size_t statOffset = 0;
- size_t statLength = 0;
- size_t statActual = 0;
- unsigned char * statBuffer = NULL;
- int statTimeout = 0;
+ size_t extraLength = 0;
int ret = 0;
int ret2 = 0;
- DBG (10, "do_usb_cmd: start\n");
+ struct timeval timer;
+ gettimeofday(&timer,NULL);
+
+ DBG (10, "do_usb_cmd: start %lu %lu\n", (long unsigned int)timer.tv_sec, (long unsigned int)timer.tv_usec);
/****************************************************************/
/* the command stage */
@@ -6376,6 +6760,20 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
}
/****************************************************************/
+ /* the extra status stage, used by few scanners */
+ /* this is like the regular status block, with an additional */
+ /* length component at the end */
+ if(s->extra_status){
+ ret2 = do_usb_status(s,runRS,shortTime,&extraLength);
+
+ /* bail out on bad RS status */
+ if(ret2){
+ DBG(5,"extra: bad RS status, %d\n", ret2);
+ return ret2;
+ }
+ }
+
+ /****************************************************************/
/* the output stage */
if(outBuff && outLen){
@@ -6432,6 +6830,12 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
inLength = inOffset+*inLen;
inActual = inLength;
+ /* use the extra length to alter the amount of in we request */
+ if(s->extra_status && extraLength && *inLen > extraLength){
+ DBG(5,"in: adjust extra, %d %d\n", (int)*inLen, (int)extraLength);
+ inActual = inOffset+extraLength;
+ }
+
/*blast caller's copy in case we error out*/
*inLen = 0;
@@ -6443,16 +6847,16 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
sanei_usb_set_timeout(inTimeout);
/* build inBuffer */
- inBuffer = calloc(inLength,1);
+ inBuffer = calloc(inActual,1);
if(!inBuffer){
DBG(5,"in: no mem\n");
return SANE_STATUS_NO_MEM;
}
- DBG(25, "in: reading %d bytes, timeout %d\n", (int)inLength, inTimeout);
+ DBG(25, "in: reading %d bytes, timeout %d\n", (int)inActual, inTimeout);
ret = sanei_usb_read_bulk(s->fd, inBuffer, &inActual);
DBG(25, "in: read %d bytes, retval %d\n", (int)inActual, ret);
- hexdump(30, "in: <<", inBuffer, inActual);
+ hexdump(31, "in: <<", inBuffer, inActual);
if(!inActual){
DBG(5,"in: got no data, clearing\n");
@@ -6474,49 +6878,8 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
}
/****************************************************************/
- /* the status stage */
- statOffset = 0;
- if(s->padded_read)
- statOffset = USB_HEADER_LEN;
-
- statLength = statOffset+USB_STATUS_LEN;
- statActual = statLength;
- statTimeout = USB_STATUS_TIME;
-
- /* change timeout */
- if(shortTime)
- statTimeout/=60;
- sanei_usb_set_timeout(statTimeout);
-
- /* build statBuffer */
- statBuffer = calloc(statLength,1);
- if(!statBuffer){
- DBG(5,"stat: no mem\n");
- if(inBuffer) free(inBuffer);
- return SANE_STATUS_NO_MEM;
- }
-
- DBG(25, "stat: reading %d bytes, timeout %d\n", (int)statLength, statTimeout);
- ret2 = sanei_usb_read_bulk(s->fd, statBuffer, &statActual);
- DBG(25, "stat: read %d bytes, retval %d\n", (int)statActual, ret2);
- hexdump(30, "stat: <<", statBuffer, statActual);
-
- /*weird status*/
- if(ret2 != SANE_STATUS_GOOD){
- DBG(5,"stat: clearing error '%s'\n",sane_strstatus(ret2));
- ret2 = do_usb_clear(s,1,runRS);
- }
- /*short read*/
- else if(statLength != statActual){
- DBG(5,"stat: clearing short %d/%d\n",(int)statLength,(int)statActual);
- ret2 = do_usb_clear(s,1,runRS);
- }
- /*inspect the last byte of the status response*/
- else if(statBuffer[statLength-1]){
- DBG(5,"stat: status %d\n",statBuffer[statLength-1]);
- ret2 = do_usb_clear(s,0,runRS);
- }
- free(statBuffer);
+ /* the normal status stage */
+ ret2 = do_usb_status(s,runRS,shortTime,&extraLength);
/* if status said EOF, adjust input with remainder count */
if(ret2 == SANE_STATUS_EOF && inBuffer){
@@ -6524,11 +6887,11 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
/* EOF is ok */
ret2 = SANE_STATUS_GOOD;
- if(inActual <= inLength - s->rs_info){
- DBG(5,"in: we read <= RS, ignoring RS: %d <= %d (%d-%d)\n",
+ if(inActual < inLength - s->rs_info){
+ DBG(5,"in: we read < RS, ignoring RS: %d < %d (%d-%d)\n",
(int)inActual,(int)(inLength-s->rs_info),(int)inLength,(int)s->rs_info);
}
- else if(s->rs_info){
+ else if(inActual > inLength - s->rs_info){
DBG(5,"in: we read > RS, using RS: %d to %d (%d-%d)\n",
(int)inActual,(int)(inLength-s->rs_info),(int)inLength,(int)s->rs_info);
inActual = inLength - s->rs_info;
@@ -6556,7 +6919,80 @@ do_usb_cmd(struct scanner *s, int runRS, int shortTime,
free(inBuffer);
}
- DBG (10, "do_usb_cmd: finish\n");
+ gettimeofday(&timer,NULL);
+
+ DBG (10, "do_usb_cmd: finish %lu %lu\n", (long unsigned int)timer.tv_sec, (long unsigned int)timer.tv_usec);
+
+ return ret;
+}
+
+static SANE_Status
+do_usb_status(struct scanner *s, int runRS, int shortTime, size_t * extraLength)
+{
+
+#define EXTRA_READ_len 4
+
+ size_t statPadding = 0;
+ size_t statOffset = 0;
+ size_t statLength = 0;
+ size_t statActual = 0;
+ unsigned char * statBuffer = NULL;
+ int statTimeout = 0;
+
+ int ret = 0;
+
+ if(s->padded_read)
+ statPadding = USB_HEADER_LEN;
+
+ statLength = statPadding+USB_STATUS_LEN;
+ statOffset = statLength-1;
+
+ if(s->extra_status)
+ statLength += EXTRA_READ_len;
+
+ statActual = statLength;
+ statTimeout = USB_STATUS_TIME;
+
+ /* change timeout */
+ if(shortTime)
+ statTimeout/=60;
+ sanei_usb_set_timeout(statTimeout);
+
+ /* build statBuffer */
+ statBuffer = calloc(statLength,1);
+ if(!statBuffer){
+ DBG(5,"stat: no mem\n");
+ return SANE_STATUS_NO_MEM;
+ }
+
+ DBG(25, "stat: reading %d bytes, timeout %d\n", (int)statLength, statTimeout);
+ ret = sanei_usb_read_bulk(s->fd, statBuffer, &statActual);
+ DBG(25, "stat: read %d bytes, retval %d\n", (int)statActual, ret);
+ hexdump(30, "stat: <<", statBuffer, statActual);
+
+ /*weird status*/
+ if(ret != SANE_STATUS_GOOD){
+ DBG(5,"stat: clearing error '%s'\n",sane_strstatus(ret));
+ ret = do_usb_clear(s,1,runRS);
+ }
+ /*short read*/
+ else if(statLength != statActual){
+ DBG(5,"stat: clearing short %d/%d\n",(int)statLength,(int)statActual);
+ ret = do_usb_clear(s,1,runRS);
+ }
+ /*inspect the status byte of the response*/
+ else if(statBuffer[statOffset]){
+ DBG(5,"stat: status %d\n",statBuffer[statLength-1-4]);
+ ret = do_usb_clear(s,0,runRS);
+ }
+
+ /*extract the extra length byte of the response*/
+ if(s->extra_status){
+ *extraLength = get_ES_length(statBuffer);
+ DBG(15,"stat: extra %d\n",(int)*extraLength);
+ }
+
+ free(statBuffer);
return ret;
}
@@ -6670,6 +7106,26 @@ wait_scanner(struct scanner *s)
return ret;
}
+/* Some scanners have per-resolution
+ * color interlacing values, but most
+ * don't. This helper can tell the
+ * difference.
+ */
+static int
+get_color_inter(struct scanner *s, int side, int res)
+{
+ int i;
+ for(i=0;i<DPI_1200;i++){
+ if(res == dpi_list[i])
+ break;
+ }
+
+ if(s->color_inter_by_res[i])
+ return s->color_inter_by_res[i];
+
+ return s->color_interlace[side];
+}
+
/* s->u.page_x stores the user setting
* for the paper width in adf. sometimes,
* we need a value that differs from this
@@ -6789,7 +7245,8 @@ hexdump (int level, char *comment, unsigned char *p, int l)
}
/* print last (partial) line */
- DBG (level, "%s\n", line);
+ if (i)
+ DBG (level, "%s\n", line);
}
/**