summaryrefslogtreecommitdiff
path: root/backend/genesys/low.h
diff options
context:
space:
mode:
Diffstat (limited to 'backend/genesys/low.h')
-rw-r--r--backend/genesys/low.h275
1 files changed, 110 insertions, 165 deletions
diff --git a/backend/genesys/low.h b/backend/genesys/low.h
index d7f5dd2..d67b427 100644
--- a/backend/genesys/low.h
+++ b/backend/genesys/low.h
@@ -108,39 +108,6 @@
#define GENESYS_GREEN 1
#define GENESYS_BLUE 2
-/* Flags */
-#define GENESYS_FLAG_UNTESTED (1 << 0) /**< Print a warning for these scanners */
-#define GENESYS_FLAG_14BIT_GAMMA (1 << 1) /**< use 14bit Gamma table instead of 12 */
-#define GENESYS_FLAG_XPA (1 << 3)
-#define GENESYS_FLAG_SKIP_WARMUP (1 << 4) /**< skip genesys_warmup() */
-/** @brief offset calibration flag
- * signals that the scanner does offset calibration. In this case off_calibration() and
- * coarse_gain_calibration() functions must be implemented
- */
-#define GENESYS_FLAG_OFFSET_CALIBRATION (1 << 5)
-#define GENESYS_FLAG_SEARCH_START (1 << 6) /**< do start search before scanning */
-#define GENESYS_FLAG_REPARK (1 << 7) /**< repark head (and check for lock) by
- moving without scanning */
-#define GENESYS_FLAG_DARK_CALIBRATION (1 << 8) /**< do dark calibration */
-
-#define GENESYS_FLAG_MUST_WAIT (1 << 10) /**< tells wether the scanner must wait for the head when parking */
-
-
-#define GENESYS_FLAG_HAS_UTA (1 << 11) /**< scanner has a transparency adapter */
-
-#define GENESYS_FLAG_DARK_WHITE_CALIBRATION (1 << 12) /**< yet another calibration method. does white and dark shading in one run, depending on a black and a white strip*/
-#define GENESYS_FLAG_CUSTOM_GAMMA (1 << 13) /**< allow custom gamma tables */
-#define GENESYS_FLAG_NO_CALIBRATION (1 << 14) /**< allow scanners to use skip the calibration, needed for sheetfed scanners */
-#define GENESYS_FLAG_SIS_SENSOR (1 << 16) /**< handling of multi-segments sensors in software */
-#define GENESYS_FLAG_SHADING_NO_MOVE (1 << 17) /**< scanner doesn't move sensor during shading calibration */
-#define GENESYS_FLAG_SHADING_REPARK (1 << 18) /**< repark head between shading scans */
-#define GENESYS_FLAG_FULL_HWDPI_MODE (1 << 19) /**< scanner always use maximum hw dpi to setup the sensor */
-// scanner has infrared transparency scanning capability
-#define GENESYS_FLAG_HAS_UTA_INFRARED (1 << 20)
-// scanner calibration is handled on the host side
-#define GENESYS_FLAG_CALIBRATION_HOST_SIDE (1 << 21)
-#define GENESYS_FLAG_16BIT_DATA_INVERTED (1 << 22)
-
#define GENESYS_HAS_NO_BUTTONS 0 /**< scanner has no supported button */
#define GENESYS_HAS_SCAN_SW (1 << 0) /**< scanner has SCAN button */
#define GENESYS_HAS_FILE_SW (1 << 1) /**< scanner has FILE button */
@@ -186,66 +153,60 @@
#define AFE_SET 2
#define AFE_POWER_SAVE 4
-#define LOWORD(x) ((uint16_t)((x) & 0xffff))
-#define HIWORD(x) ((uint16_t)((x) >> 16))
-#define LOBYTE(x) ((uint8_t)((x) & 0xFF))
-#define HIBYTE(x) ((uint8_t)((x) >> 8))
-
-/* Global constants */
-/* TODO: emove this leftover of early backend days */
-#define MOTOR_SPEED_MAX 350
-#define DARK_VALUE 0
-
-#define MAX_RESOLUTIONS 13
-#define MAX_DPI 4
-
namespace genesys {
-struct Genesys_USB_Device_Entry {
+class UsbDeviceEntry {
+public:
+ static constexpr std::uint16_t BCD_DEVICE_NOT_SET = 0xffff;
+
+ UsbDeviceEntry(std::uint16_t vendor_id, std::uint16_t product_id,
+ const Genesys_Model& model) :
+ vendor_{vendor_id}, product_{product_id},
+ bcd_device_{BCD_DEVICE_NOT_SET}, model_{model}
+ {}
- Genesys_USB_Device_Entry(unsigned v, unsigned p, const Genesys_Model& m) :
- vendor(v), product(p), model(m)
+ UsbDeviceEntry(std::uint16_t vendor_id, std::uint16_t product_id, std::uint16_t bcd_device,
+ const Genesys_Model& model) :
+ vendor_{vendor_id}, product_{product_id},
+ bcd_device_{bcd_device}, model_{model}
{}
+ std::uint16_t vendor_id() const { return vendor_; }
+ std::uint16_t product_id() const { return product_; }
+ std::uint16_t bcd_device() const { return bcd_device_; }
+
+ const Genesys_Model& model() const { return model_; }
+
+ bool matches(std::uint16_t vendor_id, std::uint16_t product_id, std::uint16_t bcd_device)
+ {
+ if (vendor_ != vendor_id)
+ return false;
+ if (product_ != product_id)
+ return false;
+ if (bcd_device_ != BCD_DEVICE_NOT_SET && bcd_device != BCD_DEVICE_NOT_SET &&
+ bcd_device_ != bcd_device)
+ {
+ return false;
+ }
+ return true;
+ }
+
+private:
// USB vendor identifier
- std::uint16_t vendor;
+ std::uint16_t vendor_;
// USB product identifier
- std::uint16_t product;
+ std::uint16_t product_;
+ // USB bcdProduct identifier
+ std::uint16_t bcd_device_;
// Scanner model information
- Genesys_Model model;
+ Genesys_Model model_;
};
-/**
- * structure for motor database
- */
-struct Motor_Profile
-{
- MotorId motor_id;
- int exposure; // used only to select the wanted motor
- StepType step_type; // default step type for given exposure
- MotorSlope slope;
-};
-
-extern StaticInit<std::vector<Motor_Profile>> gl843_motor_profiles;
-extern StaticInit<std::vector<Motor_Profile>> gl846_motor_profiles;
-extern StaticInit<std::vector<Motor_Profile>> gl847_motor_profiles;
-extern StaticInit<std::vector<Motor_Profile>> gl124_motor_profiles;
-
/*--------------------------------------------------------------------------*/
/* common functions needed by low level specific functions */
/*--------------------------------------------------------------------------*/
-inline GenesysRegister* sanei_genesys_get_address(Genesys_Register_Set* regs, uint16_t addr)
-{
- auto* ret = regs->find_reg_address(addr);
- if (ret == nullptr) {
- DBG(DBG_error, "%s: failed to find address for register 0x%02x, crash expected !\n",
- __func__, addr);
- }
- return ret;
-}
-
-extern void sanei_genesys_init_cmd_set(Genesys_Device* dev);
+std::unique_ptr<CommandSet> create_cmd_set(AsicType asic_type);
// reads the status of the scanner
Status scanner_read_status(Genesys_Device& dev);
@@ -259,21 +220,26 @@ void scanner_read_print_status(Genesys_Device& dev);
void debug_print_status(DebugMessageHelper& dbg, Status status);
+void scanner_register_rw_clear_bits(Genesys_Device& dev, std::uint16_t address, std::uint8_t mask);
+void scanner_register_rw_set_bits(Genesys_Device& dev, std::uint16_t address, std::uint8_t mask);
+void scanner_register_rw_bits(Genesys_Device& dev, std::uint16_t address,
+ std::uint8_t value, std::uint8_t mask);
+
extern void sanei_genesys_write_ahb(Genesys_Device* dev, uint32_t addr, uint32_t size,
uint8_t* data);
extern void sanei_genesys_init_structs (Genesys_Device * dev);
-const Genesys_Sensor& sanei_genesys_find_sensor_any(Genesys_Device* dev);
-const Genesys_Sensor& sanei_genesys_find_sensor(Genesys_Device* dev, unsigned dpi,
+const Genesys_Sensor& sanei_genesys_find_sensor_any(const Genesys_Device* dev);
+const Genesys_Sensor& sanei_genesys_find_sensor(const Genesys_Device* dev, unsigned dpi,
unsigned channels, ScanMethod scan_method);
-bool sanei_genesys_has_sensor(Genesys_Device* dev, unsigned dpi, unsigned channels,
+bool sanei_genesys_has_sensor(const Genesys_Device* dev, unsigned dpi, unsigned channels,
ScanMethod scan_method);
Genesys_Sensor& sanei_genesys_find_sensor_for_write(Genesys_Device* dev, unsigned dpi,
unsigned channels, ScanMethod scan_method);
std::vector<std::reference_wrapper<const Genesys_Sensor>>
- sanei_genesys_find_sensors_all(Genesys_Device* dev, ScanMethod scan_method);
+ sanei_genesys_find_sensors_all(const Genesys_Device* dev, ScanMethod scan_method);
std::vector<std::reference_wrapper<Genesys_Sensor>>
sanei_genesys_find_sensors_all_for_write(Genesys_Device* dev, ScanMethod scan_method);
@@ -318,13 +284,9 @@ extern void sanei_genesys_set_buffer_address(Genesys_Device* dev, uint32_t addr)
unsigned sanei_genesys_get_bulk_max_size(AsicType asic_type);
-SANE_Int sanei_genesys_exposure_time2(Genesys_Device * dev, float ydpi, StepType step_type,
+SANE_Int sanei_genesys_exposure_time2(Genesys_Device* dev, const MotorProfile& profile, float ydpi,
int endpixel, int led_exposure);
-MotorSlopeTable sanei_genesys_create_slope_table3(AsicType asic_type, const Genesys_Motor& motor,
- StepType step_type, int exposure_time,
- unsigned yres);
-
void sanei_genesys_create_default_gamma_table(Genesys_Device* dev,
std::vector<uint16_t>& gamma_table, float gamma);
@@ -335,28 +297,42 @@ void sanei_genesys_send_gamma_table(Genesys_Device* dev, const Genesys_Sensor& s
extern void sanei_genesys_stop_motor(Genesys_Device* dev);
-extern void sanei_genesys_search_reference_point(Genesys_Device* dev, Genesys_Sensor& sensor,
- const uint8_t* src_data, int start_pixel, int dpi,
- int width, int height);
-
// moves the scan head by the specified steps at the motor base dpi
void scanner_move(Genesys_Device& dev, ScanMethod scan_method, unsigned steps, Direction direction);
void scanner_move_back_home(Genesys_Device& dev, bool wait_until_home);
void scanner_move_back_home_ta(Genesys_Device& dev);
-void scanner_clear_scan_and_feed_counts(Genesys_Device& dev);
+/** Search for a full width black or white strip.
+ This function searches for a black or white stripe across the scanning area.
+ When searching backward, the searched area must completely be of the desired
+ color since this area will be used for calibration which scans forward.
-extern void sanei_genesys_write_file(const char* filename, const std::uint8_t* data,
- std::size_t length);
+ @param dev scanner device
+ @param forward true if searching forward, false if searching backward
+ @param black true if searching for a black strip, false for a white strip
+ */
+void scanner_search_strip(Genesys_Device& dev, bool forward, bool black);
+
+bool should_calibrate_only_active_area(const Genesys_Device& dev,
+ const Genesys_Settings& settings);
+
+void scanner_offset_calibration(Genesys_Device& dev, const Genesys_Sensor& sensor,
+ Genesys_Register_Set& regs);
-extern void sanei_genesys_write_pnm_file(const char* filename, const std::uint8_t* data, int depth,
- int channels, int pixels_per_line, int lines);
+void scanner_coarse_gain_calibration(Genesys_Device& dev, const Genesys_Sensor& sensor,
+ Genesys_Register_Set& regs, unsigned dpi);
+
+SensorExposure scanner_led_calibration(Genesys_Device& dev, const Genesys_Sensor& sensor,
+ Genesys_Register_Set& regs);
+
+void scanner_clear_scan_and_feed_counts(Genesys_Device& dev);
-void sanei_genesys_write_pnm_file(const char* filename, const Image& image);
+void scanner_send_slope_table(Genesys_Device* dev, const Genesys_Sensor& sensor, unsigned table_nr,
+ const std::vector<uint16_t>& slope_table);
-extern void sanei_genesys_write_pnm_file16(const char* filename, const uint16_t *data, unsigned channels,
- unsigned pixels_per_line, unsigned lines);
+extern void sanei_genesys_write_file(const char* filename, const std::uint8_t* data,
+ std::size_t length);
void wait_until_buffer_non_empty(Genesys_Device* dev, bool check_status_twice = false);
@@ -370,25 +346,13 @@ void regs_set_exposure(AsicType asic_type, Genesys_Register_Set& regs,
void regs_set_optical_off(AsicType asic_type, Genesys_Register_Set& regs);
-void sanei_genesys_set_dpihw(Genesys_Register_Set& regs, const Genesys_Sensor& sensor,
- unsigned dpihw);
-
-inline uint16_t sanei_genesys_fixup_exposure_value(uint16_t value)
-{
- if ((value & 0xff00) == 0) {
- value |= 0x100;
- }
- if ((value & 0x00ff) == 0) {
- value |= 0x1;
- }
- return value;
-}
+void sanei_genesys_set_dpihw(Genesys_Register_Set& regs, unsigned dpihw);
inline SensorExposure sanei_genesys_fixup_exposure(SensorExposure exposure)
{
- exposure.red = sanei_genesys_fixup_exposure_value(exposure.red);
- exposure.green = sanei_genesys_fixup_exposure_value(exposure.green);
- exposure.blue = sanei_genesys_fixup_exposure_value(exposure.blue);
+ exposure.red = std::max<std::uint16_t>(1, exposure.red);
+ exposure.green = std::max<std::uint16_t>(1, exposure.green);
+ exposure.blue = std::max<std::uint16_t>(1, exposure.blue);
return exposure;
}
@@ -396,7 +360,7 @@ bool get_registers_gain4_bit(AsicType asic_type, const Genesys_Register_Set& reg
extern void sanei_genesys_wait_for_home(Genesys_Device* dev);
-extern void sanei_genesys_asic_init(Genesys_Device* dev, bool cold);
+extern void sanei_genesys_asic_init(Genesys_Device* dev);
void scanner_start_action(Genesys_Device& dev, bool start_motor);
void scanner_stop_action(Genesys_Device& dev);
@@ -404,15 +368,23 @@ void scanner_stop_action_no_move(Genesys_Device& dev, Genesys_Register_Set& regs
bool scanner_is_motor_stopped(Genesys_Device& dev);
-const Motor_Profile& sanei_genesys_get_motor_profile(const std::vector<Motor_Profile>& motors,
- MotorId motor_id, int exposure);
+void scanner_setup_sensor(Genesys_Device& dev, const Genesys_Sensor& sensor,
+ Genesys_Register_Set& regs);
+
+const MotorProfile* get_motor_profile_ptr(const std::vector<MotorProfile>& profiles,
+ unsigned exposure,
+ const ScanSession& session);
-MotorSlopeTable sanei_genesys_slope_table(AsicType asic_type, int dpi, int exposure, int base_dpi,
- unsigned step_multiplier,
- const Motor_Profile& motor_profile);
+const MotorProfile& get_motor_profile(const std::vector<MotorProfile>& profiles,
+ unsigned exposure,
+ const ScanSession& session);
+
+MotorSlopeTable create_slope_table(AsicType asic_type, const Genesys_Motor& motor, unsigned ydpi,
+ unsigned exposure, unsigned step_multiplier,
+ const MotorProfile& motor_profile);
MotorSlopeTable create_slope_table_fastest(AsicType asic_type, unsigned step_multiplier,
- const Motor_Profile& motor_profile);
+ const MotorProfile& motor_profile);
/** @brief find lowest motor resolution for the device.
* Parses the resolution list for motor and
@@ -449,52 +421,22 @@ extern void sanei_genesys_generate_gamma_buffer(Genesys_Device* dev,
int size,
uint8_t* gamma);
+unsigned session_adjust_output_pixels(unsigned output_pixels,
+ const Genesys_Device& dev, const Genesys_Sensor& sensor,
+ unsigned output_xresolution, unsigned output_yresolution,
+ bool adjust_output_pixels);
+
void compute_session(const Genesys_Device* dev, ScanSession& s, const Genesys_Sensor& sensor);
-void build_image_pipeline(Genesys_Device* dev, const ScanSession& session);
+ImagePipelineStack build_image_pipeline(const Genesys_Device& dev, const ScanSession& session,
+ unsigned pipeline_index, bool log_image_data);
+
+// sets up a image pipeline for device `dev`
+void setup_image_pipeline(Genesys_Device& dev, const ScanSession& session);
std::uint8_t compute_frontend_gain(float value, float target_value,
FrontendType frontend_type);
-template<class T>
-inline T abs_diff(T a, T b)
-{
- if (a < b) {
- return b - a;
- } else {
- return a - b;
- }
-}
-
-inline uint64_t align_multiple_floor(uint64_t x, uint64_t multiple)
-{
- return (x / multiple) * multiple;
-}
-
-inline uint64_t align_multiple_ceil(uint64_t x, uint64_t multiple)
-{
- return ((x + multiple - 1) / multiple) * multiple;
-}
-
-inline uint64_t multiply_by_depth_ceil(uint64_t pixels, uint64_t depth)
-{
- if (depth == 1) {
- return (pixels / 8) + ((pixels % 8) ? 1 : 0);
- } else {
- return pixels * (depth / 8);
- }
-}
-
-template<class T>
-inline T clamp(const T& value, const T& lo, const T& hi)
-{
- if (value < lo)
- return lo;
- if (value > hi)
- return hi;
- return value;
-}
-
/*---------------------------------------------------------------------------*/
/* ASIC specific functions declarations */
/*---------------------------------------------------------------------------*/
@@ -502,15 +444,18 @@ inline T clamp(const T& value, const T& lo, const T& hi)
extern StaticInit<std::vector<Genesys_Sensor>> s_sensors;
extern StaticInit<std::vector<Genesys_Frontend>> s_frontends;
extern StaticInit<std::vector<Genesys_Gpo>> s_gpo;
+extern StaticInit<std::vector<MemoryLayout>> s_memory_layout;
extern StaticInit<std::vector<Genesys_Motor>> s_motors;
-extern StaticInit<std::vector<Genesys_USB_Device_Entry>> s_usb_devices;
+extern StaticInit<std::vector<UsbDeviceEntry>> s_usb_devices;
void genesys_init_sensor_tables();
void genesys_init_frontend_tables();
void genesys_init_gpo_tables();
+void genesys_init_memory_layout_tables();
void genesys_init_motor_tables();
-void genesys_init_motor_profile_tables();
void genesys_init_usb_device_tables();
+void verify_sensor_tables();
+void verify_usb_device_tables();
template<class T>
void debug_dump(unsigned level, const T& value)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 14:52:34 +0000