diff options
Diffstat (limited to 'backend/genesys/tables_motor_profile.cpp')
| -rw-r--r-- | backend/genesys/tables_motor_profile.cpp | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/backend/genesys/tables_motor_profile.cpp b/backend/genesys/tables_motor_profile.cpp new file mode 100644 index 0000000..18f7271 --- /dev/null +++ b/backend/genesys/tables_motor_profile.cpp @@ -0,0 +1,380 @@ +/* sane - Scanner Access Now Easy. + + Copyright (C) 2019 Povilas Kanapickas <povilas@radix.lt> + + This file is part of the SANE package. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + As a special exception, the authors of SANE give permission for + additional uses of the libraries contained in this release of SANE. + + The exception is that, if you link a SANE library with other files + to produce an executable, this does not by itself cause the + resulting executable to be covered by the GNU General Public + License. Your use of that executable is in no way restricted on + account of linking the SANE library code into it. + + This exception does not, however, invalidate any other reasons why + the executable file might be covered by the GNU General Public + License. + + If you submit changes to SANE to the maintainers to be included in + a subsequent release, you agree by submitting the changes that + those changes may be distributed with this exception intact. + + If you write modifications of your own for SANE, it is your choice + whether to permit this exception to apply to your modifications. + If you do not wish that, delete this exception notice. +*/ + +#define DEBUG_DECLARE_ONLY + +#include "low.h" + +namespace genesys { + +StaticInit<std::vector<Motor_Profile>> gl843_motor_profiles; + +void genesys_init_motor_profile_tables_gl843() +{ + gl843_motor_profiles.init(); + + auto profile = Motor_Profile(); + profile.motor_id = MotorId::KVSS080; + profile.exposure = 8000; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(44444, 500, 489); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::G4050; + profile.exposure = 8016; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(7842, 320, 602); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::G4050; + profile.exposure = 15624; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(9422, 254, 1004); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::G4050; + profile.exposure = 42752; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(42752, 1706, 610); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::G4050; + profile.exposure = 56064; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(28032, 2238, 604); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_4400F; + profile.exposure = 11640; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(49152, 484, 1014); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_8400F; + profile.exposure = 50000; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(8743, 300, 794); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_8600F; + profile.exposure = 0x59d8; + profile.step_type = StepType::QUARTER; + // FIXME: if the exposure is lower then we'll select another motor + profile.slope = MotorSlope::create_from_steps(54612, 1500, 219); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7200I; + profile.exposure = 0; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(39682, 1191, 15); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7300; + profile.exposure = 0x2f44; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(31250, 1512, 6); + gl843_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7500I; + profile.exposure = 0; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(31250, 1375, 7); + gl843_motor_profiles->push_back(profile); +} + +StaticInit<std::vector<Motor_Profile>> gl846_motor_profiles; + +void genesys_init_motor_profile_tables_gl846() +{ + gl846_motor_profiles.init(); + + auto profile = Motor_Profile(); + profile.motor_id = MotorId::IMG101; + profile.exposure = 11000; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017); + + gl846_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::PLUSTEK_OPTICBOOK_3800; + profile.exposure = 11000; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017); + gl846_motor_profiles->push_back(profile); +} + +/** + * database of motor profiles + */ + +StaticInit<std::vector<Motor_Profile>> gl847_motor_profiles; + +void genesys_init_motor_profile_tables_gl847() +{ + gl847_motor_profiles.init(); + + auto profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_100; + profile.exposure = 2848; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_100; + profile.exposure = 1424; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_100; + profile.exposure = 1432; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_100; + profile.exposure = 2712; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(46876, 534, 279); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_100; + profile.exposure = 5280; + profile.step_type = StepType::EIGHTH; + profile.slope = MotorSlope::create_from_steps(31680, 534, 247); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 2848; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 1424; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 1432; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 2712; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(46876, 534, 279); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 5280; + profile.step_type = StepType::EIGHTH; + profile.slope = MotorSlope::create_from_steps(31680, 534, 247); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_200; + profile.exposure = 10416; + profile.step_type = StepType::EIGHTH; + profile.slope = MotorSlope::create_from_steps(31680, 534, 247); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_700; + profile.exposure = 2848; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_700; + profile.exposure = 1424; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_700; + profile.exposure = 1504; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 534, 255); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_700; + profile.exposure = 2696; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(46876, 2022, 127); + gl847_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_700; + profile.exposure = 10576; + profile.step_type = StepType::EIGHTH; + profile.slope = MotorSlope::create_from_steps(46876, 15864, 2); + gl847_motor_profiles->push_back(profile); +} + +StaticInit<std::vector<Motor_Profile>> gl124_motor_profiles; + +void genesys_init_motor_profile_tables_gl124() +{ + gl124_motor_profiles.init(); + + // NEXT LPERIOD=PREVIOUS*2-192 + Motor_Profile profile; + profile.motor_id = MotorId::CANON_LIDE_110; + profile.exposure = 2768; + profile.step_type = StepType::FULL; + profile.slope = MotorSlope::create_from_steps(62496, 335, 255); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_110; + profile.exposure = 5360; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(62496, 335, 469); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_110; + profile.exposure = 10528; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(62496, 2632, 3); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_110; + profile.exposure = 20864; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(62496, 10432, 3); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_120; + profile.exposure = 4608; + profile.step_type = StepType::FULL; + profile.slope = MotorSlope::create_from_steps(62496, 864, 127); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_120; + profile.exposure = 5360; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(62496, 2010, 63); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_120; + profile.exposure = 10528; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(62464, 2632, 3); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_120; + profile.exposure = 20864; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(62592, 10432, 5); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_210; + profile.exposure = 2768; + profile.step_type = StepType::FULL; + profile.slope = MotorSlope::create_from_steps(62496, 335, 255); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_210; + profile.exposure = 5360; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(62496, 335, 469); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_210; + profile.exposure = 10528; + profile.step_type = StepType::HALF; + profile.slope = MotorSlope::create_from_steps(62496, 2632, 3); + gl124_motor_profiles->push_back(profile); + + profile = Motor_Profile(); + profile.motor_id = MotorId::CANON_LIDE_210; + profile.exposure = 20864; + profile.step_type = StepType::QUARTER; + profile.slope = MotorSlope::create_from_steps(62496, 10432, 4); + gl124_motor_profiles->push_back(profile); +} + +void genesys_init_motor_profile_tables() +{ + genesys_init_motor_profile_tables_gl843(); + genesys_init_motor_profile_tables_gl846(); + genesys_init_motor_profile_tables_gl847(); + genesys_init_motor_profile_tables_gl124(); +} + +} // namespace genesys |