summaryrefslogtreecommitdiff
path: root/backend/genesys_gl843.c
diff options
context:
space:
mode:
Diffstat (limited to 'backend/genesys_gl843.c')
-rw-r--r--backend/genesys_gl843.c127
1 files changed, 64 insertions, 63 deletions
diff --git a/backend/genesys_gl843.c b/backend/genesys_gl843.c
index 2b0d8fa..b47fb7e 100644
--- a/backend/genesys_gl843.c
+++ b/backend/genesys_gl843.c
@@ -1,6 +1,6 @@
/* sane - Scanner Access Now Easy.
- Copyright (C) 2010-2013 Stéphane Voltz <stef.dev@free.fr>
+ Copyright (C) 2010-2013 Stéphane Voltz <stef.dev@free.fr>
This file is part of the SANE package.
@@ -376,7 +376,7 @@ gl843_get_step_multiplier (Genesys_Register_Set * regs)
value = 1;
}
}
- DBG (DBG_io, "%s: step multiplier is %d\n", __FUNCTION__, value);
+ DBG (DBG_io, "%s: step multiplier is %d\n", __func__, value);
return value;
}
@@ -452,7 +452,7 @@ static Sensor_Profile *get_sensor_profile(int sensor_type, int dpi, int flags)
/* default fallback */
if(idx<0)
{
- DBG (DBG_warn,"%s: using default sensor profile\n",__FUNCTION__);
+ DBG (DBG_warn,"%s: using default sensor profile\n",__func__);
idx=0;
}
@@ -790,7 +790,7 @@ gl843_send_slope_table (Genesys_Device * dev, int table_nr,
int i;
char msg[10000];
- DBG (DBG_proc, "%s (table_nr = %d, steps = %d)\n", __FUNCTION__,
+ DBG (DBG_proc, "%s (table_nr = %d, steps = %d)\n", __func__,
table_nr, steps);
table = (uint8_t *) malloc (steps * 2);
@@ -807,7 +807,7 @@ gl843_send_slope_table (Genesys_Device * dev, int table_nr,
{
sprintf (msg+strlen(msg), "%d", slope_table[i]);
}
- DBG (DBG_io, "%s: %s\n", __FUNCTION__, msg);
+ DBG (DBG_io, "%s: %s\n", __func__, msg);
}
@@ -818,7 +818,7 @@ gl843_send_slope_table (Genesys_Device * dev, int table_nr,
{
DBG (DBG_error,
"%s: write data failed writing slope table %d (%s)\n",
- __FUNCTION__, table_nr, sane_strstatus (status));
+ __func__, table_nr, sane_strstatus (status));
}
free (table);
@@ -957,7 +957,7 @@ gl843_init_motor_regs_scan (Genesys_Device * dev,
lincnt=scan_lines;
sanei_genesys_set_triple(reg,REG_LINCNT,lincnt);
- DBG (DBG_io, "%s: lincnt=%d\n", __FUNCTION__, lincnt);
+ DBG (DBG_io, "%s: lincnt=%d\n", __func__, lincnt);
/* compute register 02 value */
r = sanei_genesys_get_address (reg, REG02);
@@ -1036,7 +1036,7 @@ gl843_init_motor_regs_scan (Genesys_Device * dev,
{
dist += fast_steps*2;
}
- DBG (DBG_io2, "%s: acceleration distance=%d\n", __FUNCTION__, dist);
+ DBG (DBG_io2, "%s: acceleration distance=%d\n", __func__, dist);
/* get sure when don't insane value : XXX STEF XXX in this case we should
* fall back to single table move */
@@ -1046,7 +1046,7 @@ gl843_init_motor_regs_scan (Genesys_Device * dev,
feedl = 1;
sanei_genesys_set_triple(reg,REG_FEEDL,feedl);
- DBG (DBG_io, "%s: feedl=%d\n", __FUNCTION__, feedl);
+ DBG (DBG_io, "%s: feedl=%d\n", __func__, feedl);
/* doesn't seem to matter that much */
sanei_genesys_calculate_zmode2 (use_fast_fed,
@@ -1179,13 +1179,13 @@ gl843_init_optical_regs_scan (Genesys_Device * dev,
{
tgtime=2;
}
- DBG (DBG_io2, "%s: tgtime=%d\n", __FUNCTION__, tgtime);
+ DBG (DBG_io2, "%s: tgtime=%d\n", __func__, tgtime);
/* to manage high resolution device while keeping good
* low resolution scanning speed, we make hardware dpi vary */
dpihw=sanei_genesys_compute_dpihw(dev, used_res);
factor=dev->sensor.optical_res/dpihw;
- DBG (DBG_io2, "%s: dpihw=%d (factor=%d)\n", __FUNCTION__, dpihw, factor);
+ DBG (DBG_io2, "%s: dpihw=%d (factor=%d)\n", __func__, dpihw, factor);
/* sensor parameters */
gl843_setup_sensor (dev, reg, dpihw, flags);
@@ -1193,7 +1193,7 @@ gl843_init_optical_regs_scan (Genesys_Device * dev,
/* resolution is divided according to CKSEL which is known once sensor is set up */
r = sanei_genesys_get_address (reg, REG18);
cksel= (r->value & REG18_CKSEL)+1;
- DBG (DBG_io2, "%s: cksel=%d\n", __FUNCTION__, cksel);
+ DBG (DBG_io2, "%s: cksel=%d\n", __func__, cksel);
dpiset = used_res * cksel;
/* start and end coordinate in optical dpi coordinates */
@@ -1218,7 +1218,7 @@ gl843_init_optical_regs_scan (Genesys_Device * dev,
status = gl843_set_fe (dev, AFE_SET);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to set frontend: %s\n", __FUNCTION__,
+ DBG (DBG_error, "%s: failed to set frontend: %s\n", __func__,
sane_strstatus (status));
return status;
}
@@ -1329,12 +1329,12 @@ gl843_init_optical_regs_scan (Genesys_Device * dev,
if(half_ccd)
{
sanei_genesys_set_double(reg,REG_DPISET,dpiset*4);
- DBG (DBG_io2, "%s: dpiset used=%d\n", __FUNCTION__, dpiset*4);
+ DBG (DBG_io2, "%s: dpiset used=%d\n", __func__, dpiset*4);
}
else
{
sanei_genesys_set_double(reg,REG_DPISET,dpiset);
- DBG (DBG_io2, "%s: dpiset used=%d\n", __FUNCTION__, dpiset);
+ DBG (DBG_io2, "%s: dpiset used=%d\n", __func__, dpiset);
}
sanei_genesys_set_double(reg,REG_STRPIXEL,startx/tgtime);
@@ -1355,22 +1355,22 @@ gl843_init_optical_regs_scan (Genesys_Device * dev,
dev->wpl = words_per_line;
dev->bpl = words_per_line;
- DBG (DBG_io2, "%s: used_pixels=%d\n", __FUNCTION__, used_pixels);
- DBG (DBG_io2, "%s: pixels =%d\n", __FUNCTION__, pixels);
- DBG (DBG_io2, "%s: depth =%d\n", __FUNCTION__, depth);
- DBG (DBG_io2, "%s: dev->bpl =%lu\n", __FUNCTION__, (unsigned long) dev->bpl);
- DBG (DBG_io2, "%s: dev->len =%lu\n", __FUNCTION__, (unsigned long)dev->len);
- DBG (DBG_io2, "%s: dev->dist =%lu\n", __FUNCTION__, (unsigned long)dev->dist);
+ DBG (DBG_io2, "%s: used_pixels=%d\n", __func__, used_pixels);
+ DBG (DBG_io2, "%s: pixels =%d\n", __func__, pixels);
+ DBG (DBG_io2, "%s: depth =%d\n", __func__, depth);
+ DBG (DBG_io2, "%s: dev->bpl =%lu\n", __func__, (unsigned long) dev->bpl);
+ DBG (DBG_io2, "%s: dev->len =%lu\n", __func__, (unsigned long)dev->len);
+ DBG (DBG_io2, "%s: dev->dist =%lu\n", __func__, (unsigned long)dev->dist);
words_per_line *= channels;
/* MAXWD is expressed in 2 words unit */
/* nousedspace = (mem_bank_range * 1024 / 256 -1 ) * 4; */
sanei_genesys_set_triple(reg,REG_MAXWD,(words_per_line)>>1);
- DBG (DBG_io2, "%s: words_per_line used=%d\n", __FUNCTION__, words_per_line);
+ DBG (DBG_io2, "%s: words_per_line used=%d\n", __func__, words_per_line);
sanei_genesys_set_double(reg,REG_LPERIOD,exposure/tgtime);
- DBG (DBG_io2, "%s: exposure used=%d\n", __FUNCTION__, exposure/tgtime);
+ DBG (DBG_io2, "%s: exposure used=%d\n", __func__, exposure/tgtime);
r = sanei_genesys_get_address (reg, REG_DUMMY);
r->value = dev->sensor.dummy_pixel * tgtime;
@@ -1456,7 +1456,7 @@ gl843_init_scan_regs (Genesys_Device * dev,
{
stagger = (4 * yres) / dev->motor.base_ydpi;
}
- DBG (DBG_info, "%s : stagger=%d lines\n", __FUNCTION__, stagger);
+ DBG (DBG_info, "%s : stagger=%d lines\n", __func__, stagger);
/* we enable true gray for cis scanners only, and just when doing
* scan since color calibration is OK for this mode
@@ -1498,7 +1498,7 @@ gl843_init_scan_regs (Genesys_Device * dev,
/* compute correct pixels number */
used_pixels = (pixels * optical_res) / xres;
- DBG (DBG_info, "%s: used_pixels=%d\n", __FUNCTION__, used_pixels);
+ DBG (DBG_info, "%s: used_pixels=%d\n", __func__, used_pixels);
/* round up pixels number if needed */
if (used_pixels * xres < pixels * optical_res)
@@ -1531,8 +1531,8 @@ gl843_init_scan_regs (Genesys_Device * dev,
scan_step_type = sanei_genesys_compute_step_type(gl843_motors, dev->model->motor_type, exposure);
}
- DBG (DBG_info, "%s : exposure=%d pixels\n", __FUNCTION__, exposure);
- DBG (DBG_info, "%s : scan_step_type=%d\n", __FUNCTION__, scan_step_type);
+ DBG (DBG_info, "%s : exposure=%d pixels\n", __func__, exposure);
+ DBG (DBG_info, "%s : scan_step_type=%d\n", __func__, scan_step_type);
/*** optical parameters ***/
/* in case of dynamic lineart, we use an internal 8 bit gray scan
@@ -1652,7 +1652,7 @@ gl843_init_scan_regs (Genesys_Device * dev,
dev->current_setup.pixels = (used_pixels * used_res) / optical_res;
- DBG (DBG_info, "%s: current_setup.pixels=%d\n", __FUNCTION__, dev->current_setup.pixels);
+ DBG (DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels);
dev->current_setup.lines = lincnt;
dev->current_setup.depth = depth;
dev->current_setup.channels = channels;
@@ -1777,7 +1777,7 @@ gl843_calculate_current_setup (Genesys_Device * dev)
stagger = (4 * yres) / dev->motor.base_ydpi;
else
stagger = 0;
- DBG (DBG_info, "%s: stagger=%d lines\n", __FUNCTION__, stagger);
+ DBG (DBG_info, "%s: stagger=%d lines\n", __func__, stagger);
if(xres<=optical_res)
used_res = xres;
@@ -1790,11 +1790,11 @@ gl843_calculate_current_setup (Genesys_Device * dev)
/* compute correct pixels number */
used_pixels = (pixels * optical_res) / xres;
- DBG (DBG_info, "%s: used_pixels=%d\n", __FUNCTION__, used_pixels);
+ DBG (DBG_info, "%s: used_pixels=%d\n", __func__, used_pixels);
/* exposure */
exposure = gl843_compute_exposure (dev, used_res, oflags);
- DBG (DBG_info, "%s : exposure=%d pixels\n", __FUNCTION__, exposure);
+ DBG (DBG_info, "%s : exposure=%d pixels\n", __func__, exposure);
/* it seems base_dpi of the G4050 motor is changed above 600 dpi*/
if (dev->model->motor_type == MOTOR_G4050 && yres>600)
@@ -1817,7 +1817,7 @@ gl843_calculate_current_setup (Genesys_Device * dev)
lincnt = lines + max_shift + stagger;
dev->current_setup.pixels = (used_pixels * used_res) / optical_res;
- DBG (DBG_info, "%s: current_setup.pixels=%d\n", __FUNCTION__, dev->current_setup.pixels);
+ DBG (DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels);
dev->current_setup.lines = lincnt;
dev->current_setup.depth = depth;
dev->current_setup.channels = channels;
@@ -1944,7 +1944,7 @@ gl843_stop_action (Genesys_Device * dev)
uint8_t val40, val;
unsigned int loop;
- DBG (DBG_proc, "%s\n", __FUNCTION__);
+ DBG (DBG_proc, "%s\n", __func__);
status = sanei_genesys_get_status (dev, &val);
if (DBG_LEVEL >= DBG_io)
@@ -1957,17 +1957,17 @@ gl843_stop_action (Genesys_Device * dev)
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
- "%s: failed to read home sensor: %s\n", __FUNCTION__,
+ "%s: failed to read home sensor: %s\n", __func__,
sane_strstatus (status));
- DBG (DBG_proc, "%s: completed\n", __FUNCTION__);
+ DBG (DBG_proc, "%s: completed\n", __func__);
return status;
}
/* only stop action if needed */
if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG))
{
- DBG (DBG_info, "%s: already stopped\n", __FUNCTION__);
- DBG (DBG_proc, "%s: completed\n", __FUNCTION__);
+ DBG (DBG_info, "%s: already stopped\n", __func__);
+ DBG (DBG_proc, "%s: completed\n", __func__);
return SANE_STATUS_GOOD;
}
@@ -1978,7 +1978,7 @@ gl843_stop_action (Genesys_Device * dev)
status = sanei_genesys_write_register (dev, REG01, val);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to write register 01: %s\n", __FUNCTION__,
+ DBG (DBG_error, "%s: failed to write register 01: %s\n", __func__,
sane_strstatus (status));
return status;
}
@@ -1997,7 +1997,7 @@ gl843_stop_action (Genesys_Device * dev)
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
- "%s: failed to read home sensor: %s\n", __FUNCTION__,
+ "%s: failed to read home sensor: %s\n", __func__,
sane_strstatus (status));
DBGCOMPLETED;
return status;
@@ -2042,7 +2042,7 @@ gl843_get_paper_sensor (Genesys_Device * dev, SANE_Bool * paper_loaded)
static SANE_Status
gl843_eject_document (Genesys_Device * dev)
{
- DBG (DBG_proc, "%s: not implemented \n", __FUNCTION__);
+ DBG (DBG_proc, "%s: not implemented \n", __func__);
if (dev == NULL)
return SANE_STATUS_INVAL;
return SANE_STATUS_GOOD;
@@ -2052,7 +2052,7 @@ gl843_eject_document (Genesys_Device * dev)
static SANE_Status
gl843_load_document (Genesys_Device * dev)
{
- DBG (DBG_proc, "%s: not implemented \n", __FUNCTION__);
+ DBG (DBG_proc, "%s: not implemented \n", __func__);
if (dev == NULL)
return SANE_STATUS_INVAL;
return SANE_STATUS_GOOD;
@@ -2071,14 +2071,14 @@ gl843_detect_document_end (Genesys_Device * dev)
unsigned int scancnt = 0;
int flines, channels, depth, bytes_remain, sublines,
bytes_to_flush, lines, sub_bytes, tmp, read_bytes_left;
- DBG (DBG_proc, "%s: begin\n", __FUNCTION__);
+ DBG (DBG_proc, "%s: begin\n", __func__);
RIE (gl843_get_paper_sensor (dev, &paper_loaded));
/* sheetfed scanner uses home sensor as paper present */
if ((dev->document == SANE_TRUE) && !paper_loaded)
{
- DBG (DBG_info, "%s: no more document\n", __FUNCTION__);
+ DBG (DBG_info, "%s: no more document\n", __func__);
dev->document = SANE_FALSE;
channels = dev->current_setup.channels;
@@ -2193,7 +2193,7 @@ gl843_detect_document_end (Genesys_Device * dev)
}
}
- DBG (DBG_proc, "%s: finished\n", __FUNCTION__);
+ DBG (DBG_proc, "%s: finished\n", __func__);
return SANE_STATUS_GOOD;
}
@@ -2483,7 +2483,7 @@ static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev)
status = gl843_start_action (dev);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to start motor: %s\n",__FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to start motor: %s\n",__func__, sane_strstatus (status));
gl843_stop_action (dev);
/* restore original registers */
dev->model->cmd_set->bulk_write_register (dev, dev->reg, GENESYS_GL843_MAX_REGS);
@@ -2496,7 +2496,7 @@ static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev)
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
- "%s: failed to read home sensor: %s\n",__FUNCTION__,
+ "%s: failed to read home sensor: %s\n",__func__,
sane_strstatus (status));
return status;
}
@@ -2507,8 +2507,8 @@ static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev)
if (val & REG41_HOMESNR) /* home sensor */
{
- DBG (DBG_info, "%s: reached home position\n",__FUNCTION__);
- DBG (DBG_proc, "%s: finished\n",__FUNCTION__);
+ DBG (DBG_info, "%s: reached home position\n",__func__);
+ DBG (DBG_proc, "%s: finished\n",__func__);
/* clear GPOADF to avoid reparking again */
sanei_genesys_read_register (dev, REG6B, &val);
@@ -2524,7 +2524,7 @@ static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev)
}
/* we are not parked here.... should we fail ? */
- DBG (DBG_info, "%s: XPA lamp is not parked\n", __FUNCTION__);
+ DBG (DBG_info, "%s: XPA lamp is not parked\n", __func__);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
@@ -2564,7 +2564,7 @@ gl843_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home)
status = sanei_genesys_get_status (dev, &val);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to read home sensor: %s\n", __FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus (status));
return status;
}
usleep (100000); /* sleep 100 ms */
@@ -2674,7 +2674,7 @@ gl843_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home)
return SANE_STATUS_IO_ERROR;
}
- DBG (DBG_info, "%s: scanhead is still moving\n", __FUNCTION__);
+ DBG (DBG_info, "%s: scanhead is still moving\n", __func__);
DBGCOMPLETED;
return SANE_STATUS_GOOD;
}
@@ -2926,7 +2926,7 @@ gl843_feed (Genesys_Device * dev, unsigned int steps)
status = gl843_start_action (dev);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to start motor: %s\n", __FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus (status));
gl843_stop_action (dev);
/* restore original registers */
@@ -3000,7 +3000,7 @@ gl843_init_regs_for_shading (Genesys_Device * dev)
dev->scanhead_position_in_steps += dev->calib_lines + move;
sanei_genesys_get_double(dev->calib_reg,REG_STRPIXEL,&strpixel);
- DBG (DBG_info, "%s: STRPIXEL=%d\n", __FUNCTION__, strpixel);
+ DBG (DBG_info, "%s: STRPIXEL=%d\n", __func__, strpixel);
status = dev->model->cmd_set->bulk_write_register (dev, dev->calib_reg, GENESYS_GL843_MAX_REGS);
if (status != SANE_STATUS_GOOD)
@@ -3380,9 +3380,9 @@ dark_average_channel (uint8_t * data, unsigned int pixels, unsigned int lines,
}
if (count)
avg[k] /= count;
- DBG (DBG_info, "%s: avg[%d] = %d\n", __FUNCTION__, k, avg[k]);
+ DBG (DBG_info, "%s: avg[%d] = %d\n", __func__, k, avg[k]);
}
- DBG (DBG_info, "%s: average = %d\n", __FUNCTION__, avg[channel]);
+ DBG (DBG_info, "%s: average = %d\n", __func__, avg[channel]);
return avg[channel];
}
@@ -3786,7 +3786,7 @@ gl843_init_regs_for_warmup (Genesys_Device * dev,
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to setup scan: %s\n", __FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus (status));
return status;
}
@@ -3875,7 +3875,7 @@ gl843_boot (Genesys_Device * dev, SANE_Bool cold)
{
RIE (sanei_genesys_read_register (dev, 0x00, &val));
DBG (DBG_info,
- "%s: reported version for genesys chip is 0x%02x\n", __FUNCTION__,
+ "%s: reported version for genesys chip is 0x%02x\n", __func__,
val);
}
@@ -3998,7 +3998,7 @@ SANE_Status gl843_move_to_ta (Genesys_Device * dev)
status = gl843_feed (dev, feed);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to move to XPA calibration area\n", __FUNCTION__);
+ DBG (DBG_error, "%s: failed to move to XPA calibration area\n", __func__);
return status;
}
@@ -4357,16 +4357,16 @@ gl843_send_shading_data (Genesys_Device * dev, uint8_t * data, int size)
/* 16 bit words, 2 words per color, 3 color channels */
offset=(strpixel-startx)*2*2*3;
length=(endpixel-strpixel)*2*2*3;
- DBG (DBG_info, "%s: STRPIXEL=%d, ENDPIXEL=%d, startx=%d\n", __FUNCTION__, strpixel, endpixel, startx);
+ DBG (DBG_info, "%s: STRPIXEL=%d, ENDPIXEL=%d, startx=%d\n", __func__, strpixel, endpixel, startx);
}
/* compute and allocate size for final data */
final_size = ((length+251) / 252) * 256;
- DBG (DBG_io, "%s: final shading size=%04x (length=%d)\n", __FUNCTION__, final_size, length);
+ DBG (DBG_io, "%s: final shading size=%04x (length=%d)\n", __func__, final_size, length);
final_data = (uint8_t *) malloc (final_size);
if(final_data==NULL)
{
- DBG (DBG_error, "%s: failed to allocate memory for shading data\n", __FUNCTION__);
+ DBG (DBG_error, "%s: failed to allocate memory for shading data\n", __func__);
return SANE_STATUS_NO_MEM;
}
memset(final_data,0x00,final_size);
@@ -4390,7 +4390,7 @@ gl843_send_shading_data (Genesys_Device * dev, uint8_t * data, int size)
status = sanei_genesys_set_buffer_address (dev, 0);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to set buffer address: %s\n", __FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus (status));
free(final_data);
return status;
}
@@ -4398,7 +4398,7 @@ gl843_send_shading_data (Genesys_Device * dev, uint8_t * data, int size)
status = dev->model->cmd_set->bulk_write_data (dev, 0x3c, final_data, count);
if (status != SANE_STATUS_GOOD)
{
- DBG (DBG_error, "%s: failed to send shading table: %s\n", __FUNCTION__, sane_strstatus (status));
+ DBG (DBG_error, "%s: failed to send shading table: %s\n", __func__, sane_strstatus (status));
}
free(final_data);
@@ -4446,6 +4446,7 @@ static Genesys_Command_Set gl843_cmd_set = {
gl843_led_calibration,
gl843_slow_back_home,
+ NULL,
sanei_genesys_bulk_write_register,
gl843_bulk_write_data,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 12:21:03 +0000