diff options
Diffstat (limited to 'backend/plustek-pp_misc.c')
-rw-r--r-- | backend/plustek-pp_misc.c | 435 |
1 files changed, 0 insertions, 435 deletions
diff --git a/backend/plustek-pp_misc.c b/backend/plustek-pp_misc.c index ec2f129..ffcfa7c 100644 --- a/backend/plustek-pp_misc.c +++ b/backend/plustek-pp_misc.c @@ -77,27 +77,11 @@ /*************************** some definitions ********************************/ -#ifndef __KERNEL__ # define PPA_PROBE_SPP 0x0001 # define PPA_PROBE_PS2 0x0002 # define PPA_PROBE_ECR 0x0010 # define PPA_PROBE_EPP17 0x0100 # define PPA_PROBE_EPP19 0x0200 -#else - -/* the parport driver in Kernel 2.4 has changed. It does report the - * possible modes in a different, more general way. As long, as - * we do not use the parport-module change mode facility, I assume - * the following correlations - */ -#if defined LINUX_24 || defined LINUX_26 -# define PARPORT_MODE_PCPS2 PARPORT_MODE_TRISTATE -# define PARPORT_MODE_PCEPP PARPORT_MODE_EPP -# define PARPORT_MODE_PCECPPS2 PARPORT_MODE_TRISTATE -# define PARPORT_MODE_PCECPEPP PARPORT_MODE_EPP -# define PARPORT_MODE_PCECR PARPORT_MODE_ECP -#endif -#endif #define _PP_A 16807 /**< multiplier */ #define _PP_M 2147483647L /**< 2**31 - 1 */ @@ -107,299 +91,10 @@ static int port_feature = 0; static long randomnum = 1; -#ifdef __KERNEL__ -static int portIsClaimed[_MAX_PTDEVS] = { [0 ... (_MAX_PTDEVS-1)] = 0 }; - -MODELSTR; /**< a static char array (see plustek-pp.h) */ - -#else static int portIsClaimed[_MAX_PTDEVS] = { 0, 0, 0, 0 }; -#endif /*************************** local functions *********************************/ -#ifdef __KERNEL__ -#ifdef LINUX_26 - -static pScanData __ps = NULL; -static int __pa = -1; - -/** callback from parport driver - */ -static void misc_attach(struct parport *port) -{ - DBG( DBG_LOW, "misc_attach\n" ); - - __ps->pp = NULL; - if( port->base == (unsigned long)__pa ) { - DBG( DBG_LOW, "Requested port (0x%02x) found\n", __pa ); - DBG( DBG_LOW, "Port mode reported: (0x%04x)\n", port->modes ); - __ps->pp = port; - } -} - -static void misc_detach( struct parport *port ) -{ - DBG( DBG_LOW, "misc_detach\n" ); -} - -static struct parport_driver pt_drv = { - .name = "pt_drv", - .attach = misc_attach, - .detach = misc_detach, -}; -#endif - -/** display the available port-modes - */ -#ifdef DEBUG -static void miscShowPortModes( int modes ) -{ - DBG( DBG_LOW, "parport-modi:" ); - - if( modes & PARPORT_MODE_PCSPP ) - DBG( DBG_LOW, " SPP" ); - - if( modes & PARPORT_MODE_PCPS2 ) - DBG( DBG_LOW, " PS/2" ); - - if( modes & PARPORT_MODE_PCEPP ) - DBG( DBG_LOW, " EPP" ); - - if( modes & PARPORT_MODE_PCECR ) - DBG( DBG_LOW, " ECP" ); - - if( modes & PARPORT_MODE_PCECPEPP ) - DBG( DBG_LOW, " EPP(ECP)" ); - - if( modes & PARPORT_MODE_PCECPPS2 ) - DBG( DBG_LOW, " PS/2(ECP)" ); - - DBG( DBG_LOW, "\n" ); -} -#endif - -/** probe the parallel port - */ -static int initPortProbe( pScanData ps ) -{ - int retv = 0; - - /* clear the controls */ - ps->IO.lastPortMode = 0xFFFF; - - if( NULL != ps->pardev ) - retv = ps->pardev->port->modes; - return retv; -} - -/** will be called by the parport module when we already have access, but - * another module wants access to the port... - */ -static int miscPreemptionCallback( pVoid data ) -{ - pScanData ps = (pScanData)data; - - if( NULL != ps ) { - - /* never release during scanning */ - if( ps->DataInf.dwScanFlag & _SCANNER_SCANNING ) { - DBG( DBG_LOW, "no way!!!\n" ); - return 1; - } - } - - /* let the port go...*/ - return 0; -} - -/** depending on the reported possible port modes, we try to set a faster mode - * than SPP - */ -static int miscSetFastMode( pScanData ps ) -{ - UChar a, b; - - /* - * when previously found the EPP mode, break right here - */ - if (( _PORT_EPP == ps->IO.portMode ) && (!(port_feature & PARPORT_MODE_PCECR))) - return _OK; - - /* CHECK REMOVE: from here we should have SPP (Paranoia Code !) */ - if (( _PORT_SPP != ps->IO.portMode ) && (!(port_feature & PARPORT_MODE_PCECR))) - return _OK; - - DBG(DBG_LOW, "Trying faster mode...\n" ); - - /* - * ECP mode usually has sub-modes of EPP and/or PS2. - * First we try to set EPP - */ - if((port_feature & PARPORT_MODE_PCECR) && - (port_feature & PARPORT_MODE_PCECPEPP)){ - - DBG(DBG_LOW, "Attempting to set EPP from ECP mode.\n" ); - - a = _INB_ECTL(ps); /* get current ECR */ - ps->IO.lastPortMode = a; /* save it for restoring later */ - a = (a & 0x1F) | 0x80; /* set to EPP */ - _OUTB_ECTL(ps, a); /* write it back */ - _DO_UDELAY(1); - - /* - * It is probably unnecessary to - * do this check but it makes me feel better - */ - b = _INB_ECTL(ps); /* check to see if port set */ - if( a == b ) { - DBG( DBG_LOW, "Port is set to (ECP) EPP mode.\n" ); - ps->IO.portMode = _PORT_EPP; - return _OK; - - } else { - DBG( DBG_LOW, "Port could not be set to (ECP) EPP mode. " - "Using SPP mode.\n" ); - _OUTB_ECTL(ps,(Byte)ps->IO.lastPortMode); /* restore */ - _DO_UDELAY(1); - ps->IO.portMode = _PORT_SPP; - - /* go ahead and try with other settings...*/ - } - } - - /* If port cannot be set to EPP, try PS2 */ - if((port_feature & PARPORT_MODE_PCECR) && - (port_feature & PARPORT_MODE_PCECPPS2)) { - - DBG(DBG_LOW, "Attempting to set PS2 from ECPPS2 mode.\n" ); - - a = _INB_ECTL(ps); /* get current ECR */ - ps->IO.lastPortMode = a; /* save it for restoring later */ - - /* set to Fast Centronics/bi-directional/PS2 */ - a = (a & 0x1F) | 0x20; - _OUTB_ECTL(ps,a); /* write it back */ - _DO_UDELAY(1); - - /* - * It is probably unnecessary to do this check - * but it makes me feel better - */ - b = _INB_ECTL(ps); /* check to see if port set */ - if (a == b) { - DBG(DBG_LOW, "Port is set to (ECP) PS2 bidirectional mode.\n"); - ps->IO.portMode = _PORT_BIDI; - return _OK; - } else { - DBG(DBG_LOW, "Port could not be set to (ECP) PS2 mode. " - "Using SPP mode.\n"); - a = ps->IO.lastPortMode & 0x1F; - _OUTB_ECTL(ps, a); /* set ECP ctrl to SPP */ - _DO_UDELAY(1); - ps->IO.portMode = _PORT_SPP; - - /* next mode, last attempt... */ - } - } - - /* - * Some BIOS/cards have only a Bi-directional/PS2 mode (no EPP). - * Make one last attempt to set to PS2 mode. - */ - if ( port_feature & PARPORT_MODE_PCPS2 ){ - - DBG(DBG_LOW, "Attempting to set PS2 mode.\n" ); - - a = _INB_CTRL(ps); /* get current setting of control register*/ - ps->IO.lastPortMode = a; /* save it for restoring later */ - a = a | 0x20; /* set bit 5 of control reg */ - _OUTB_CTRL(ps,a); /* set to Fast Centronics/bi-directional/PS2 */ - _DO_UDELAY(1); - a = 0; - - _OUTB_DATA(ps,0x55); - _DO_UDELAY(1); - if ((inb(ps->IO.portBase)) != 0x55) /* read data */ - a++; - - _OUTB_DATA(ps,0xAA); - _DO_UDELAY(1); - - if (_INB_DATA(ps) != 0xAA) /* read data */ - a++; - - if( 2 == a ) { - DBG(DBG_LOW, "Port is set to PS2 bidirectional mode.\n"); - ps->IO.portMode = _PORT_BIDI; - return _OK; - - } else { - DBG(DBG_LOW, "Port could not be set to PS2 mode. " - "Using SPP mode.\n"); - _OUTB_CTRL(ps,(Byte)ps->IO.lastPortMode); /* restore */ - _DO_UDELAY(1); - ps->IO.portMode = _PORT_SPP; - } - } - - /* reaching this point, we're back in SPP mode and there's no need - * to restore at shutdown... - */ - ps->IO.lastPortMode = 0xFFFF; - - return _OK; -} - -/** check the state of the par-port and switch to EPP-mode if possible - */ -static int miscSetPortMode( pScanData ps ) -{ - /* try to detect the port settings, SPP seems to work in any case ! */ - port_feature = initPortProbe( ps ); - -#ifdef DEBUG - miscShowPortModes( port_feature ); -#endif - - switch( ps->IO.forceMode ) { - - case 1: - DBG( DBG_LOW, "Use of SPP-mode enforced\n" ); - ps->IO.portMode = _PORT_SPP; - return _OK; - break; - - case 2: - DBG( DBG_LOW, "Use of EPP-mode enforced\n" ); - ps->IO.portMode = _PORT_EPP; - return _OK; - break; - - default: - break; - } - - if( !(port_feature & PARPORT_MODE_PCEPP)) { - - if( !(port_feature & PARPORT_MODE_PCSPP )) { - _PRINT("\nThis Port supports not the SPP- or EPP-Mode\n" ); - _PRINT("Please activate SPP-Mode, EPP-Mode or\nEPP + ECP-Mode!\n"); - return _E_NOSUPP; - } else { - DBG(DBG_LOW, "Using SPP-mode\n" ); - ps->IO.portMode = _PORT_SPP; - } - } else { - DBG(DBG_LOW, "Using EPP-mode\n" ); - ps->IO.portMode = _PORT_EPP; - } - - /* else try to set to a faster mode than SPP */ - return miscSetFastMode( ps ); -} -#endif - /** miscNextLongRand() -- generate 2**31-2 random numbers ** ** public domain by Ray Gardner @@ -488,34 +183,6 @@ _LOC int MiscReinitStruct( pScanData ps ) */ _LOC int MiscInitPorts( pScanData ps, int port ) { -#ifdef __KERNEL__ - int status; - - if( NULL == ps ) - return _E_NULLPTR; - - /* - * Get access to the ports - */ - ps->IO.portBase = (UShort)port; - - status = miscSetPortMode(ps); - - if( _OK != status ) { - ps->sCaps.wIOBase = _NO_BASE; - ps->IO.portBase = _NO_BASE; - return status; - } - - /* - * the port settings - */ - ps->IO.pbSppDataPort = (UShort)port; - ps->IO.pbStatusPort = (UShort)port+1; - ps->IO.pbControlPort = (UShort)port+2; - ps->IO.pbEppDataPort = (UShort)port+4; - -#else int mode, mts; if( NULL == ps ) @@ -560,7 +227,6 @@ _LOC int MiscInitPorts( pScanData ps, int port ) sanei_pp_setmode( ps->pardev, mts ); _VAR_NOT_USED( port ); -#endif return _OK; } @@ -568,11 +234,6 @@ _LOC int MiscInitPorts( pScanData ps, int port ) */ _LOC void MiscRestorePort( pScanData ps ) { -#ifdef __KERNEL__ - if( 0 == ps->IO.pbSppDataPort ) - return; -#endif - DBG(DBG_LOW,"MiscRestorePort()\n"); /* don't restore if not necessary */ @@ -582,19 +243,9 @@ _LOC void MiscRestorePort( pScanData ps ) } /*Restore Port-Mode*/ -#ifdef __KERNEL__ - if( port_feature & PARPORT_MODE_PCECR ){ - _OUTB_ECTL( ps, (Byte)ps->IO.lastPortMode ); - _DO_UDELAY(1); - } else { - _OUTB_CTRL( ps, (Byte)ps->IO.lastPortMode ); - _DO_UDELAY(1); - } -#else if( port_feature & PPA_PROBE_ECR ){ _OUTB_ECTL(ps,ps->IO.lastPortMode); } -#endif } /** Initializes a timer. @@ -605,11 +256,7 @@ _LOC void MiscStartTimer( TimerDef *timer , unsigned long us) { struct timeval start_time; -#ifdef __KERNEL__ - _GET_TIME( &start_time ); -#else gettimeofday(&start_time, NULL); -#endif *timer = (TimerDef)start_time.tv_sec * 1000000 + (TimerDef)start_time.tv_usec + us; } @@ -624,21 +271,14 @@ _LOC int MiscCheckTimer( TimerDef *timer ) { struct timeval current_time; -#ifdef __KERNEL__ - _GET_TIME( ¤t_time ); -#else gettimeofday(¤t_time, NULL); -#endif if ((TimerDef)current_time.tv_sec * 1000000 + (TimerDef)current_time.tv_usec > *timer) { return _E_TIMEOUT; } else { -#ifdef __KERNEL__ - schedule(); /*#else sched_yield(); */ -#endif return _OK; } } @@ -673,65 +313,8 @@ _LOC Bool MiscAllPointersSet( pScanData ps ) */ _LOC int MiscRegisterPort( pScanData ps, int portAddr ) { -#ifndef __KERNEL__ DBG( DBG_LOW, "Assigning port handle %i\n", portAddr ); ps->pardev = portAddr; -#else - -#ifdef LINUX_26 - __ps = ps; - __pa = portAddr; - - DBG( DBG_LOW, "Requested port at 0x%02x\n", portAddr ); - - if( parport_register_driver(&pt_drv)) { - /* Failed; nothing we can do. */ - return _E_REGISTER; - } - -#else - struct parport *pp = NULL; - - DBG( DBG_LOW, "Requested port at 0x%02x\n", portAddr ); - - pp = parport_enumerate(); - ps->pardev = NULL; - - if( NULL == pp ) { - return _E_PORTSEARCH; - } - - /* go through the list - */ - for( ps->pp = NULL; NULL != pp; ) { - - if( pp->base == (unsigned long)portAddr ) { - DBG( DBG_LOW, "Requested port (0x%02x) found\n", portAddr ); - DBG( DBG_LOW, "Port mode reported: (0x%04x)\n", pp->modes ); - ps->pp = pp; - break; - } - pp = pp->next; - } -#endif - - if( NULL == ps->pp ) { - printk("PORT not found!!!\n"); - return _E_NO_PORT; - } - - /* - * register this device - */ - ps->pardev = parport_register_device( ps->pp, "Plustek Driver", - miscPreemptionCallback, NULL, NULL, 0, (pVoid)ps ); - - if( NULL == ps->pardev ) { - return _E_REGISTER; - } - - DBG( DBG_LOW, "Port for device %u registered\n", ps->devno ); -#endif portIsClaimed[ps->devno] = 0; return _OK; @@ -741,17 +324,7 @@ _LOC int MiscRegisterPort( pScanData ps, int portAddr ) */ _LOC void MiscUnregisterPort( pScanData ps ) { -#ifdef __KERNEL__ - if( NULL != ps->pardev ) { - DBG( DBG_LOW, "Port unregistered\n" ); - parport_unregister_device( ps->pardev ); - } -#ifdef LINUX_26 - parport_unregister_driver( &pt_drv ); -#endif -#else sanei_pp_close( ps->pardev ); -#endif } /** Try to claim the port @@ -763,11 +336,7 @@ _LOC int MiscClaimPort( pScanData ps ) if( 0 == portIsClaimed[ps->devno] ) { DBG( DBG_HIGH, "Try to claim the parport\n" ); -#ifdef __KERNEL__ - if( 0 != parport_claim( ps->pardev )) { -#else if( SANE_STATUS_GOOD != sanei_pp_claim( ps->pardev )) { -#endif return _E_BUSY; } } @@ -785,11 +354,7 @@ _LOC void MiscReleasePort( pScanData ps ) if( 0 == portIsClaimed[ps->devno] ) { DBG( DBG_HIGH, "Releasing parport\n" ); -#ifdef __KERNEL__ - parport_release( ps->pardev ); -#else sanei_pp_release( ps->pardev ); -#endif } } } |