summaryrefslogtreecommitdiff
path: root/backend/plustek-usbscan.c
diff options
context:
space:
mode:
Diffstat (limited to 'backend/plustek-usbscan.c')
-rw-r--r--backend/plustek-usbscan.c52
1 files changed, 26 insertions, 26 deletions
diff --git a/backend/plustek-usbscan.c b/backend/plustek-usbscan.c
index c8824fc..bafc86a 100644
--- a/backend/plustek-usbscan.c
+++ b/backend/plustek-usbscan.c
@@ -595,7 +595,7 @@ usb_GetMCLKDiv( Plustek_Device *dev )
DBG( _DBG_INFO, "usb_GetMCLKDiv()\n" );
r = 8; /* line rate */
- if ((regs[0x26] & 7) == 0)
+ if ((regs[0x26] & 7) == 0)
r = 24; /* pixel rate */
/* use high or low res min integration time */
@@ -606,7 +606,7 @@ usb_GetMCLKDiv( Plustek_Device *dev )
min_int_time /((double)1000. * r * m_wLineLength));
minmclk = _MAX(minmclk,MCLKDIV_SCALING);
- maxmclk = (int)(32.5*MCLKDIV_SCALING + .5);
+ maxmclk = (int)(32.5*MCLKDIV_SCALING + .5);
DBG(_DBG_INFO2,"- lower mclkdiv limit=%f\n",(double)minmclk/MCLKDIV_SCALING);
DBG(_DBG_INFO2,"- upper mclkdiv limit=%f\n",(double)maxmclk/MCLKDIV_SCALING);
@@ -622,7 +622,7 @@ usb_GetMCLKDiv( Plustek_Device *dev )
/* compute the horizontal dpi (pixels per inch) */
j = regs[0x9] & 0x7;
- hdpi = ((j&1)*.5+1)*(j&2?2:1)*(j&4?4:1);
+ hdpi = ((j&1)*.5+1)*(j&2?2:1)*(j&4?4:1);
pixelsperline = (int)((256*regs[0x24]+regs[0x25]-256*regs[0x22]-regs[0x23])
*pixelbits/(hdpi * 8));
@@ -644,7 +644,7 @@ usb_GetMCLKDiv( Plustek_Device *dev )
while (mclkdiv * hdpi < 6.*MCLKDIV_SCALING) {
mclkdiv++;
}
- DBG( _DBG_INFO2, "- HIGHSPEED MCLK Divider = %u\n",
+ DBG( _DBG_INFO2, "- HIGHSPEED MCLK Divider = %u\n",
mclkdiv/MCLKDIV_SCALING );
}
@@ -690,7 +690,7 @@ usb_GetMCLKDivider( Plustek_Device *dev, ScanParam *pParam )
(m_dMCLKDivider * m_bCM * m_wLineLength / 6 * 9 / 10) *
(1 + m_bIntTimeAdjust)) {
m_bIntTimeAdjust++;
- }
+ }
if( hw->motorModel == MODEL_HuaLien &&
sCaps->bCCD == kNEC3799 && m_bIntTimeAdjust > bMaxITA) {
@@ -730,7 +730,7 @@ usb_GetMCLKDivider( Plustek_Device *dev, ScanParam *pParam )
m_wStepSize, regs[0x46], regs[0x47] );
usb_GetDPD( dev );
}
-
+
/* Compute maximum MCLK divider base on maximum integration time for
* high lamp PWM, use equation 4
*/
@@ -830,7 +830,7 @@ usb_GetLineLength( Plustek_Device *dev, ScanParam *param )
ctmode = (regs[0x0b] >> 3) & 3; /* cis tr timing mode */
- m_bLineRateColor = 1;
+ m_bLineRateColor = 1;
if (afeop == 1 || afeop == 5) /* if 3 channel line or 1 channel mode b */
m_bLineRateColor = 3;
@@ -845,7 +845,7 @@ usb_GetLineLength( Plustek_Device *dev, ScanParam *param )
b = 1;
if( ctmode == 0 ) { /* CCD mode scanner*/
-
+
b = (ntr + 1) * ((2 * gbnd) + dur + 1);
b += (1 - ntr) * en_tradj;
}
@@ -871,12 +871,12 @@ usb_GetLineLength( Plustek_Device *dev, ScanParam *param )
if( ctmode == 0 )
tr += m_bLineRateColor;
} else {
-
+
int le_phi, num_byteclk, num_mclkf, tr_fast_pix, extra_pix;
-
+
/* Line color or gray mode */
if( afeop != 0 ) {
-
+
le_phi = (tradj + 1) / 2 + 1 + 6;
num_byteclk = ((le_phi + 8 * le + 8 * b + 4) /
(8 * tradj)) + 1;
@@ -893,7 +893,7 @@ usb_GetLineLength( Plustek_Device *dev, ScanParam *param )
tr_fast_pix = num_byteclk;
extra_pix = (num_mclkf - le_phi) % (3 * 8);
}
-
+
tr = b + le + 4 + tr_fast_pix;
if (extra_pix == 0)
tr++;
@@ -970,8 +970,8 @@ usb_GetMotorParam( Plustek_Device *dev, ScanParam *pParam )
}
else if(pParam->PhyDpi.x <= 400)
{
- regs[0x56] = 8;
- regs[0x57] = 48;
+ regs[0x56] = 8;
+ regs[0x57] = 48;
}
else if(pParam->PhyDpi.x <= 600)
{
@@ -1184,7 +1184,7 @@ usb_SetScanParameters( Plustek_Device *dev, ScanParam *pParam )
usb_GetScanRect ( dev, pParam );
usb_PresetStepSize( dev, pParam );
-
+
if( dev->caps.dwFlag & SFLAG_ADF ) {
if( pParam->bCalibration == PARAM_Scan ) {
@@ -1251,7 +1251,7 @@ usb_SetScanParameters( Plustek_Device *dev, ScanParam *pParam )
/* Compute the number of lines to scan using actual Y resolution */
usb_GetScanLinesAndSize( dev, pParam );
-
+
/* Pause limit should be bounded by total bytes to read
* so that the chassis will not move too far.
*/
@@ -1316,7 +1316,7 @@ usb_SetScanParameters( Plustek_Device *dev, ScanParam *pParam )
_UIO(sanei_lm983x_write( dev->fd, 0x08, &regs[0x08], 0x7f - 0x08+1, SANE_TRUE));
usleep(100);
-
+
if( !usbio_WriteReg( dev->fd, 0x07, 0 ))
return SANE_FALSE;
@@ -1363,7 +1363,7 @@ usb_ScanBegin( Plustek_Device *dev, SANE_Bool auto_park )
DBG( _DBG_INFO, "ScanBegin() - Cancel detected...\n" );
return SANE_FALSE;
}
-
+
_UIO(usbio_ReadReg( dev->fd, 0x01, &m_bOldScanData ));
if( m_bOldScanData ) {
@@ -1373,7 +1373,7 @@ usb_ScanBegin( Plustek_Device *dev, SANE_Bool auto_park )
DBG(_DBG_INFO,"Flushing cache - %lu bytes (bOldScanData=%u)\n",
dwBytesToRead, m_bOldScanData );
- _UIO(sanei_lm983x_read( dev->fd, 0x00, pBuffer,
+ _UIO(sanei_lm983x_read( dev->fd, 0x00, pBuffer,
dwBytesToRead, SANE_FALSE ));
free( pBuffer );
@@ -1430,7 +1430,7 @@ usb_ScanEnd( Plustek_Device *dev )
usb_ModuleToHome( dev, SANE_FALSE );
}
else if( SANE_TRUE == cancelRead ) {
-
+
usb_ModuleToHome( dev, SANE_FALSE );
}
return SANE_TRUE;
@@ -1453,14 +1453,14 @@ usb_IsDataAvailableInDRAM( Plustek_Device *dev )
DBG( _DBG_INFO, "usb_IsDataAvailableInDRAM()\n" );
- gettimeofday( &t, NULL);
+ gettimeofday( &t, NULL);
dwTicks = t.tv_sec + 30;
for(;;) {
_UIO( sanei_lm983x_read( dev->fd, 0x01, a_bBand, 3, SANE_FALSE ));
- gettimeofday( &t, NULL);
+ gettimeofday( &t, NULL);
if( t.tv_sec > dwTicks )
break;
@@ -1468,7 +1468,7 @@ usb_IsDataAvailableInDRAM( Plustek_Device *dev )
DBG(_DBG_INFO,"usb_IsDataAvailableInDRAM() - Cancel detected...\n");
return SANE_FALSE;
}
-
+
/* It is not stable for read */
if((a_bBand[0] != a_bBand[1]) && (a_bBand[1] != a_bBand[2]))
continue;
@@ -1549,7 +1549,7 @@ usb_GetImageInfo( Plustek_Device *dev, ImgDef *pInfo, WinInfo *pSize )
case COLOR_TRUE48:
pSize->dwBytes = pSize->dwPixels * 6UL;
break;
-
+
case COLOR_TRUE24:
if( dev->scanning.fGrayFromColor > 7 ){
pSize->dwBytes = (pSize->dwPixels + 7UL) >> 3;
@@ -1597,7 +1597,7 @@ usb_SaveImageInfo( Plustek_Device *dev, ImgDef *pInfo )
case COLOR_TRUE48:
pParam->bBitDepth = 16;
/* fall through... */
-
+
case COLOR_TRUE24:
pParam->bDataType = SCANDATATYPE_Color;
@@ -1638,7 +1638,7 @@ usb_SaveImageInfo( Plustek_Device *dev, ImgDef *pInfo )
* sheetfed device to avoid stripes in the resulting pictures
*/
if( usb_IsSheetFedDevice(dev)) {
-
+
int step, div, org, xdpi;
xdpi = usb_SetAsicDpiX( dev, pParam->UserDpi.x );
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 06:26:41 +0000