summaryrefslogtreecommitdiff
path: root/backend/umax.conf.in
diff options
context:
space:
mode:
Diffstat (limited to 'backend/umax.conf.in')
-rw-r--r--backend/umax.conf.in13
1 files changed, 6 insertions, 7 deletions
diff --git a/backend/umax.conf.in b/backend/umax.conf.in
index a57cf53..06b2750 100644
--- a/backend/umax.conf.in
+++ b/backend/umax.conf.in
@@ -17,7 +17,7 @@
# 0 = handle as device busy
# 1 = handle as ok
# 2 = handle as i/o error
-# 3 = ignore bad error code - continue sense handler,
+# 3 = ignore bad error code - continue sense handler,
#option handle-bad-sense-error 0
# define if a request sense command shall be executed
@@ -43,7 +43,7 @@
# define if the calibration shall be done for selected scanarea or for each ccd pixel
# -1 = automatically set by driver - if known
# 0 = disabled
-# 1 = enabled
+# 1 = enabled
#option calibration-full-ccd 1
# define if an offset of the calculate calibration with has to be used
@@ -54,7 +54,7 @@
# -1 = disabled
# 0 = not set
# 1 = 1 byte/pixel,
-# 2 = 2 bytes/pixel
+# 2 = 2 bytes/pixel
#option calibration-bytes-pixel -1
# define if scanner uses the same exposure times for red, green and blue
@@ -66,18 +66,18 @@
# define if shading data shall be inverted befor sending it back to the scanner
# -1 = automatically set by driver - if known
# 0 = disabled
-# 1 = enabled
+# 1 = enabled
#option invert-shading-data 0
# define if the scanner supports lamp control commands
# 0 = automatically set by driver - if known
-# 1 = enabled
+# 1 = enabled
#option lamp-control-available 0
# define how 16 bit gamma data is padded
# -1 = automatically set by driver - if known
# 0 = gamma data is msb padded
-# 1 = gamma data is lsb padded
+# 1 = gamma data is lsb padded
#option gamma-lsb-padded 0
# define connection type of following devices
@@ -114,4 +114,3 @@ option connection-type 1
# usb device list
option connection-type 2
/dev/usbscanner
-