diff options
Diffstat (limited to 'debian/changelog')
| -rw-r--r-- | debian/changelog | 2282 |
1 files changed, 0 insertions, 2282 deletions
diff --git a/debian/changelog b/debian/changelog deleted file mode 100644 index 8b9cc16..0000000 --- a/debian/changelog +++ /dev/null @@ -1,2282 +0,0 @@ -sane-backends (1.0.24-1.2) unstable; urgency=medium - - * Non-maintainer upload. - * update config.* without dh-autoreconf because of local patches - to build on ppc64el. Closes: #759289 - - -- Andreas Barth <aba@ayous.org> Sat, 30 Aug 2014 11:57:08 +0000 - -sane-backends (1.0.24-1.1) unstable; urgency=medium - - * Non-maintainer upload. - * Fix FTBFS for binary-arch builds: - + Install examples through debian/libsane-common.examples. - + Use proper source paths for sane.ps and backend-writing.txt; - also fix the source path for the HTML files installed into - libsane-common. - * Clean up debian/changelog. - - -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Sat, 18 Jan 2014 21:07:24 +0100 - -sane-backends (1.0.24-1) unstable; urgency=low - - * New upstream release. - * New maintainer. (Closes: #688531) - * Disable USB testing since it (probably) doesn't work on autobuilders. - * Fixed a bunch of lintian warnings. - * Change architecture for libsane-common from "any" to "all". - - -- Mark Buda <hermit@acm.org> Sun, 24 Nov 2013 10:05:18 -0500 - -sane-backends (1.0.23-3) unstable; urgency=low - - * QA upload. - * Revert move to libtiff5-dev. - - -- Rene Engelhard <rene@debian.org> Sat, 06 Jul 2013 15:20:16 +0200 - -sane-backends (1.0.23-2) unstable; urgency=low - - * QA upload. - * Add sane-desc.c_debian_mods.patch to series file. (Closes: #714993) - - -- Markus Koschany <apo@gambaru.de> Fri, 05 Jul 2013 11:52:37 +0200 - -sane-backends (1.0.23-1) unstable; urgency=low - - * QA upload. - * Upload to unstable. - * This package has been orphaned. Set maintainer to the Debian QA Group. - * Bump compat level to 9 (was 5) and require debhelper >= 9. - * debian/control: - + sane-utils: Inherit Section: graphics from source package sane-backends. - + Remove versioned dependencies. They are trivially satisfied. - * Drop the following patches. They are merged upstream now. - + fix_v4l_build.patch - + hurd_path_max_fix.patch - + sane_desc_udev+acl.patch - + scanimage_man_batch_start.patch - + udev_usb_suspend.patch - + xerox_mfp_add_scx_4623fw.patch - + xerox_mfp_fix_usb_device.patch - * Drop disable_rpath.patch because the RPATH is already removed by chrpath - in debian/rules. - * Rebase and refresh all other patches against the new upstream relase. - * debian/rules: - + Simplify debian/rules by using dh sequencer. - + Build with --parallel and with autotools_dev. - + Enable all hardening build flags. - + Install umax_pp with sane-utils.install. - * Build-Depend on libtiff5-dev. Thanks to Michael Terry for the patch. - (Closes: #681079) - * Build-Depend on libusb-1.0-0-dev and enable libusb1.0 support in - debian/rules. Thanks to Martin Pitt for the report and Whoopie for the - patch. (Closes: #687137) - - -- Markus Koschany <apo@gambaru.de> Thu, 04 Jul 2013 17:41:47 +0200 - -sane-backends (1.0.23-0.1~experimental1) experimental; urgency=low - - * Non-maintainer upload. - * New upstream release. - - -- John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Sat, 23 Feb 2013 20:12:58 +0100 - -sane-backends (1.0.22-7.4) unstable; urgency=low - - * Non-maintainer upload. - * Compress all binaries with xz to free up some space on CD#1. - - -- Cyril Brulebois <kibi@debian.org> Mon, 17 Sep 2012 16:44:07 +0200 - -sane-backends (1.0.22-7.3) unstable; urgency=low - - * Non-maintainer upload. - * Fix build failure on kfreebsd. (Closes: #680234) - - -- Michael Gilbert <mgilbert@debian.org> Sun, 15 Jul 2012 17:07:15 -0400 - -sane-backends (1.0.22-7.2) unstable; urgency=low - - * Non-maintainer upload. - * Set sane-utils as 'Multi-Arch: foreign'. (Closes: #675797) - - -- Michael Gilbert <mgilbert@debian.org> Thu, 28 Jun 2012 16:53:15 -0400 - -sane-backends (1.0.22-7.1) unstable; urgency=low - - * Non-maintainer upload. - * Fix pending l10n issues. Debconf translations: - + Catalan; (Innocent De Marchi). (Closes: #646505) - + Slovak (Slavko). (Closes: #639235) - + Polish (Michał Kułach). (Closes: #658351) - - -- Christian Perrier <bubulle@debian.org> Wed, 28 Mar 2012 07:39:00 +0200 - -sane-backends (1.0.22-7) unstable; urgency=low - - * debian/patches/sane-desc.c_debian_mods.patch: - + Updated; do not output a timestamp as part of the udev rules file - header, it is a source of conflict for MultiArch. - - -- Julien BLACHE <jblache@debian.org> Mon, 21 Nov 2011 15:39:26 +0100 - -sane-backends (1.0.22-6) unstable; urgency=low - - * debian/control: - + Fix ibcam-dev -> libcam-dev typo. - - -- Julien BLACHE <jblache@debian.org> Thu, 21 Jul 2011 17:54:48 +0200 - -sane-backends (1.0.22-5) unstable; urgency=low - - * debian/control: - + Replace explicit architecture lists with appropriate architecture - wildcards; patch from Robert Millan. (Closes: #634518) - + Use kfreebsd-any architecture wildcard for libcam-dev in libsane-dev's - Depends field, getting rid of the custom libcam-dev substvar. - + Use linux-any architecture wildcard for udev | makedev, acl in libsane's - Depends field, gettind rid of the custom udev substvar. - * debian/rules: - + Remove custom libcam-dev and udev substvars in dh_gencontrol call. - - -- Julien BLACHE <jblache@debian.org> Wed, 20 Jul 2011 19:52:51 +0200 - -sane-backends (1.0.22-4) unstable; urgency=low - - * Convert for MultiArch. - * debian/control: - + Bump debhelper build-dep to >= 8.1.3 for multiarch. - + Add Pre-Depends: ${misc:Pre-Depends} to libsane. - + Tag libsane with Multi-Arch: same. - + New Multi-Arch: foreign libsane-common binary package. - + Add libsane-common dependency to libsane. - * debian/rules: - + Use multiarch path. - + libsane.install.in is now libsane-common.install.in. - + libsane.docs is gone. - + Create the multiarch pkgconfig directory and install the .pc file here. - + Stop creating the gt68xx firmware directory in libsane. - + Move HAL FDI file to libsane-common. - + Disable SNMP support explicitly (needs Net-SNMP 5.6). - * debian/libsane-dev.install: - + Adapt for multiarch. - * debian/libsane.install.in -> debian/libsane.install: - + Adapt for multiarch, transfer multiarch-incompatible content to - libsane-common. - * debian/libsane-common.install.in: - + Adopt multiarch-incompatible content previously found in libsane. - * debian/libsane.links -> debian/libsane-common.links: - + Transfer documentation symlinks to libsane-common. - * debian/libsane-dev.dirs: - + Removed; pkgconfig directory created in debian/rules. - * debian/patches/multiarch_dll_search_path.patch: - + Added; make /usr/lib/arch_triplet/sane the default location for SANE - backends but keep /usr/lib/sane as a fallback for now. - * debian/patches/multiarch_manpages_libdir.patch: - + Added; use a generic /usr/lib/arch_triplet/sane path for backend - location in the man pages (otherwise substituted from LIBDIR). - - -- Julien BLACHE <jblache@debian.org> Mon, 13 Jun 2011 17:07:05 +0200 - -sane-backends (1.0.22-3) unstable; urgency=low - - * debian/control: - + Bump Standards-Version to 3.9.2 (no changes). - * debian/libsane.NEWS: - + Added; document the switch to ACLs starting with 1.0.22-1. - * debconf translations: - + pt_BR.po: update from Eder L. Marques. (Closes: #619612) - + nl.po: courtesy of Jeroen Schot. (Closes: #627043) - - -- Julien BLACHE <jblache@debian.org> Thu, 02 Jun 2011 14:57:53 +0200 - -sane-backends (1.0.22-2) unstable; urgency=low - - * debian/patches/udev_usb_suspend.patch: - + Added; switch to using power/control instead of power/level for - device power setting, if available. - * debian/patches/xerox_mfp_fix_usb_devices.patch: - + Added; fix detection/handling of USB devices in xerox_mfp. - (Closes: #617307) - * debian/patches/xerox_mfp_add_scx_4623fw.patch: - + Added; add IDs for the Samsung SCX-4623FW. - * debian/patches/hurd_path_max_fix.patch: - + Added; fix build on HURD where PATH_MAX is not defined. - (Closes: #616299) - * debian/patches/scanimage_man_batch_start.patch: - + Added; fix improper documentation of --batch-start. (Closes: #614009) - - -- Julien BLACHE <jblache@debian.org> Sat, 12 Mar 2011 11:32:32 +0100 - -sane-backends (1.0.22-1) unstable; urgency=low - - * New upstream release. - + epson2: reject scan area settings that would lead to a division by zero. - (Closes: #581181) - * debian/control: - + Bump Standards-Version to 3.9.1 (no changes). - + Demote libsane-extras-* to Recommends again. - * debian/rules: - + Add acl (>= 2.2.49-4) to udev substvar for ACL utilities in /bin. - + Use sane-desc -m udev+acl. (Closes: #591767, #612815) - * debian/libsane.README.Debian: - + Update; mention ConsoleKit and the udev rules now using ACLs. - - * debian/patches/sane-desc_udev+acl.patch: - + Added; compared to experimental, setfacl is now in /bin. - * debian/patches/fix_xerox_mfp_color_mode.patch, - debian/patches/use_libsane_matched_for_scsi.patch, - debian/patches/allow_dll.d_symlinks.patch, - debian/patches/saned_exit_avahi_process.patch, - debian/patches/xerox_mfp_new_ids.patch, - debian/patches/scsi_perfection_2450.patch, - debian/patches/scsi_scanjet_4c.patch, - debian/patches/genesys_disable_raw_data_log.patch, - debian/patches/fix_epson2_commands.patch, - debian/patches/fix_epson2_cancel.patch: - - removed; merged upstream. - - -- Julien BLACHE <jblache@debian.org> Wed, 16 Feb 2011 19:00:55 +0100 - -sane-backends (1.0.22~git1.0.21-157-g126c70d-1) experimental; urgency=low - - * Git snapshot. - * debian/rules: - + Add dependency on acl to libsane when depending on udev. - + Use udev+acl mode when generating udev rules. - + debian/patches/sane-desc_udev+acl.patch: - + Added; try using ACLs for USB scanners in an effort to deconflict with - MFP devices. - - -- Julien BLACHE <jblache@debian.org> Wed, 21 Jul 2010 18:36:37 +0200 - -sane-backends (1.0.22~git1.0.21-87-g323ed01-1) experimental; urgency=low - - * Git snapshot. - + genesys now has some support for LiDE 100 & 200. (Closes: #586189) - - -- Julien BLACHE <jblache@debian.org> Wed, 23 Jun 2010 18:37:59 +0200 - -sane-backends (1.0.21-9) unstable; urgency=low - - * debian/patches/fix_epson2_cancel.patch: - + Added; fix handling of scanner errors by sending a cancel command. - (Closes: #597922) - - -- Julien BLACHE <jblache@debian.org> Sun, 12 Dec 2010 16:31:25 +0100 - -sane-backends (1.0.21-8) unstable; urgency=low - - * debian/patches/fix_epson2_commands.patch: - + Added; fix list of supported commands for levels D1 and D2. - (Closes: #582066) - - -- Julien BLACHE <jblache@debian.org> Mon, 29 Nov 2010 18:12:16 +0100 - -sane-backends (1.0.21-7) unstable; urgency=low - - * debian/patches/genesys_disable_raw_data_log.patch: - + Added; disable raw data logging. Raw data logging was enabled - upstream at some point before 1.0.21 most probably as an oversight - when committing new code. When enabled, a raw.pnm file is left - behind in the cwd when using the genesys backend. (Closes: #602995) - * debconf translations: - + Properly install vi.po, mistakenly put in po/ instead of - debian/po in 1.0.21-6. - - -- Julien BLACHE <jblache@debian.org> Mon, 15 Nov 2010 19:00:34 +0100 - -sane-backends (1.0.21-6) unstable; urgency=low - - * debian/patches/saned_exit_avahi_process.patch: - + Added; exit Avahi process on error/loop termination. - * debian/patches/xerox_mfp_new_ids.patch: - + Added; add USB IDs for supported machines in xerox_mfp. (Closes: #601748) - * debian/patches/scsi_perfection_2450.patch: - + Added; add SCSI IDs for the Perfection 2450 via FireWire. - (Closes: #601810) - * debian/patches/scsi_scanjet_4c.patch: - + Added; add SCSI IDs for the ScanJet 4c. (Closes: #601656) - * debconf translations: - + vi.po: courtesy of Clytie Siddall. (Closes: #601530) - - -- Julien BLACHE <jblache@debian.org> Sat, 06 Nov 2010 11:21:40 +0100 - -sane-backends (1.0.21-5) unstable; urgency=low - - * debconf translations: - + cs.po: courtesy of Miroslav Kure. (Closes: #598338) - + zh_CN.po: courtesy of YunQiang Su (Closes: #599590, #599591). - + da.po: courtesy of Joe Dalton. (Closes: #599642) - + eu.po: courtesy of Iñaki Larrañaga Murgoitio. (Closes: #599810) - + es.po: courtesy of Camaleón. (Closes: #600342) - + fi.po: courtesy of Esko Arajärvi. (Closes: #600514) - - -- Julien BLACHE <jblache@debian.org> Mon, 18 Oct 2010 10:08:12 +0200 - -sane-backends (1.0.21-4) unstable; urgency=low - - * debconf translations: - + it.po: courtesy of Luca Monducci. (Closes: #593722) - - -- Julien BLACHE <jblache@debian.org> Sun, 05 Sep 2010 09:44:28 +0200 - -sane-backends (1.0.21-3) unstable; urgency=low - - * debian/control: - + Bump Standards-Version to 3.9.0 (no changes). - * debian/patches/use_libsane_matched_for_scsi.patch: - + Added; use libsane_matched for SCSI scanners rules too. - * debian/patches/allow_dll.d_symlinks.patch: - + Added; allow symlinks under /etc/sane.d/dll.d. (Closes: #588392) - - -- Julien BLACHE <jblache@debian.org> Fri, 09 Jul 2010 18:21:58 +0200 - -sane-backends (1.0.21-2) unstable; urgency=low - - * debian/patches/fix_xerox_mfp_color_mode.patch: - + Added; fix xerox_mfp color mode, from upstream. (Closes: #583789) - - -- Julien BLACHE <jblache@debian.org> Tue, 01 Jun 2010 19:34:19 +0200 - -sane-backends (1.0.21-1) unstable; urgency=low - - * New upstream release. (Closes: #579254) - * Moved to source format 3.0 (quilt). - * debian/control: - + Removed dpatch build-dep. - + Add dependency on pkg-config to libsane-dev. - * debian/rules: - + Removed dpatch code. - + --disable-fork-process -> --enable-pthread. - + Install the pkg-config file for sane-backends. - * All patches refreshed, tagged with DEP-3 headers. - - -- Julien BLACHE <jblache@debian.org> Mon, 26 Apr 2010 19:59:08 +0200 - -sane-backends (1.0.20-14) unstable; urgency=low - - * debian/control: - + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev. - (Closes: #569240) - + Bump Standards-Version to 3.8.4 (no changes). - * debian/sane-utils.saned.init: - + Add $remote_fs to Required-Start & Required-Stop. - * debconf translations: - + fr.po: courtesy of Christian Perrier. (Closes: #564595) - - -- Julien BLACHE <jblache@debian.org> Sat, 13 Feb 2010 10:03:12 +0100 - -sane-backends (1.0.20-13) unstable; urgency=low - - * debian/patches/34_genesys_gl841_cal_fix.dpatch: - + Added; fix calibration on gl841-based scanners. (Closes: #563163) - * debconf translations: - + ja.po: courtesy of Hideki Yamane. (Closes: #564294) - - -- Julien BLACHE <jblache@debian.org> Sun, 10 Jan 2010 15:21:22 +0100 - -sane-backends (1.0.20-12) unstable; urgency=low - - * debian/patches/33_epson2_update.dpatch: - + Update epson2 from git HEAD. (Closes: #534746) - * debconf translations: - + de.po: courtesy of Helge Kreutzmann. (Closes: #562709) - + sv.po: courtesy of Martin Bagge. (Closes: #562931) - + ru.po: courtesy of Yuri Kozlov. (Closes: #563076) - + pt.po: courtesy of Américo Monteiro. (Closes: #563174) - - -- Julien BLACHE <jblache@debian.org> Fri, 01 Jan 2010 12:49:10 +0100 - -sane-backends (1.0.20-11) unstable; urgency=medium - - * Urgency set to medium to unbreak saned in testing. - * debian/patches/12_saned_polling_fix.dpatch: - + Added; unbreak saned's polling loop for more than 1 fds. (Closes: #562248) - * debian/patches/13_saned_aliasing_fix.dpatch: - + Added; fix strict aliasing issues in saned for gcc 4.4. - - -- Julien BLACHE <jblache@debian.org> Thu, 24 Dec 2009 17:33:35 +0100 - -sane-backends (1.0.20-10) unstable; urgency=low - - * debian/libsane.README.Debian: - + Updated udev-related information and instructions, added a note about - only adding rules for scanners supported by libsane. - * debian/sane-utils.saned.init: - + Add missing --oknodo in s-s-d stop call in restart case. - (Closes: #558648) - * debian/sane-utils.templates: - + Rework the standalone saned template and mention Avahi explicitly. - (Closes: #556877) - * debian/patches/22_dll_backend_conf.dpatch: - + Updated; use better wording for the comment about the net backend - in dll.conf. (Closes: #556912) - * debian/patches/32_epson_perfection636.dpatch: - + Added; add the Epson Perfection 636 SCSI scanner. (Closes: #555971) - - -- Julien BLACHE <jblache@debian.org> Sat, 12 Dec 2009 11:33:09 +0100 - -sane-backends (1.0.20-9) unstable; urgency=low - - * debian/patches/11_udev_147.dpatch: - + Added; remove NAME= from SCSI rules as udev 147 complains about it. Also - remove support for kernel < 2.6.22. (Closes: #555443) - - -- Julien BLACHE <jblache@debian.org> Mon, 09 Nov 2009 21:01:32 +0100 - -sane-backends (1.0.20-8) unstable; urgency=low - - * debian/rules: - + Fix nostrip builds, thanks to Tollef Fog Heen. (Closes: #548152) - * debian/patches/31_genesys_raw_log_fix.dpatch: - + Added; add missing check when logging raw data. Patch by - Tollef Fog Heen <tfheen@err.no>. (Closes: #548154) - - -- Julien BLACHE <jblache@debian.org> Sat, 26 Sep 2009 11:44:04 +0200 - -sane-backends (1.0.20-7) unstable; urgency=low - - * debian/control: - + Demote avahi-daemon to a Suggests. (Closes: #543335) - + libv4l-dev is not available on hurd-i386 either. (Closes: #545995) - * debian/patches/30_xerox_samsung_ids.dpatch: - + Added; add USB IDs for various Samsung-branded MFPs. (Closes: #545290) - - -- Julien BLACHE <jblache@debian.org> Fri, 11 Sep 2009 19:16:15 +0200 - -sane-backends (1.0.20-6) unstable; urgency=low - - * debian/control: - + Bump Standards-Version to 3.8.3 (no changes). - * debian/rules: - + Empty dependency_libs in all .la files. - * debian/patches/10_sanei_usb_update.dpatch: - + Added; from git, favour the interface detected by sanei_usb_init(). - This helps with some machines like the Canon MP730. - - -- Julien BLACHE <jblache@debian.org> Sat, 29 Aug 2009 16:55:34 +0200 - -sane-backends (1.0.20-5) unstable; urgency=low - - * debian/control: - + Bump Standards-Version to 3.8.2 (no changes). - * debian/patches/08_cardscan_usbids.dpatch: - + Added; fix USB IDs for the CardScan 800c. (Closes: #528829) - * debian/patches/09_po_update_es_add_gl.dpatch: - + Added; update es translation and add new gl translation, courtesy of - Miguel Bouzada <mbouzada@gmail.com>. - * debian/patches/20_disable_rpath.dpatch: - + Added; do not use rpath. For some reason this decided to pop up now, - even though the previous revision of the package did not suffer from - this. Go figure. - - -- Julien BLACHE <jblache@debian.org> Fri, 26 Jun 2009 14:39:41 +0200 - -sane-backends (1.0.20-4) unstable; urgency=low - - * debian/rules: - + Serialize autotools/patch/configure for parallel builds, now that - parallel builds are possible with the upstream build system. - (Closes: #506620) - * debian/control: - + Bump libsane-extras dependencies to 1.0.20.1. - * debian/sane-utils.saned.init: - + Add status action, taken from iaxmodem. (Closes: #528265) - * debian/patches/07_tools_missing_libcam.dpatch: - + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI - libraries. From upstream via Aurélien JARNO. (Closes: #528594) - - -- Julien BLACHE <jblache@debian.org> Thu, 14 May 2009 12:06:47 +0200 - -sane-backends (1.0.20-3) unstable; urgency=low - - * debian/patches/06_cap_always_settable.dpatch: - + Added; add back SANE_CAP_ALWAYS_SETTABLE which was mistakenly - removed from SANE 1.0.20. (Closes: #527675, #527682) - - -- Julien BLACHE <jblache@debian.org> Fri, 08 May 2009 21:03:56 +0200 - -sane-backends (1.0.20-2) unstable; urgency=low - - * Update previous changelog entry with regard to #519101 resolution. - * debian/patches/04_udev_rules_fix.dpatch: - + Added; fix udev rules, use ATTRS instead of ATTR. (Closes: #527196) - * debian/patches/05_saned_avahi_fds_fix.dpatch: - + Added; fix a possible net backend hang when saned is run in debug - mode. Could also happen in standalone mode, but a lot less likely. - - -- Julien BLACHE <jblache@debian.org> Wed, 06 May 2009 12:02:59 +0200 - -sane-backends (1.0.20-1) unstable; urgency=low - - * New upstream release. - + Unsupported devices are no longer included in the udev rules. - (Closes: #519101) - * debian/control: - + Bump Standards-Version to 3.8.1 (no changes). - + Add build-dep on libv4l-dev. - + Add dependency on libv4l-dev to libsane-dev. - + Move libsane-dbg to debug section. - * debian/rules: - + Use DESTDIR at install time. - + Remove rpath from sane-find-scanner. - * debian/patches/01_missing_pthreads.dpatch: - + Added; new build system breaks build when using pthreads. - * debian/patches/02_frontends_libs.dpatch: - + Added; only link the frontends with the libraries they need. - * debian/patches/03_libsane_deps.dpatch: - + Added; reduce libsane.so deps to the bare minimum. - * debian/patches/11_minimum_linkage.dpatch: - + Removed; build system was redone using automake and this isn't - needed anymore. - * debian/patches/12_new_configure.dpatch: - + Removed; not needed anymore, due to #11 going away. - * debian/patches/21_sane-config.in_no_rpath.dpatch: - + Updated; updated for new build system. - * debian/patches/23_unneeded_doc.dpatch: - + Updated; updated for new build system. - * debian/patches/22_dll_backend_conf.dpatch: - + Updated; dll.d support has been merged upstream, update dll.conf header. - * debian/patches/01_manpages_fixes.dpatch, 02_pixma_update.dpatch, - 03_snapscan_usb_ftok_fix.dpatch, 04_sane-desc_hal_new.dpatch, - 05_hp_timing_fix.dpatch, 06_sanei_scsi_attach_fix.dpatch, - 07_epson2_be_nice.dpatch, 08_epson2_be_nice_to_saned.dpatch, - 09_avision_fixes.dpatch, 10_sm3840_unbreak_sane_open.dpatch, - 30_new_saned.dpatch, 31_sanei_pthread_64bit_fix.dpatch, - 32_net_backend_standard_fix.dpatch, 33_scanimage_options_fix.dpatch, - 40_fujitsu_fixes.dpatch, 41_epjitsu_fixes.dpatch: - - removed; fixes and enhancements taken from upstream or merged upstream - in this release. - - -- Julien BLACHE <jblache@debian.org> Mon, 04 May 2009 12:45:50 +0200 - -sane-backends (1.0.19-26) unstable; urgency=low - - * debian/rules: - + Do not generate /etc/modprobe.d/libsane anymore. - * debian/libsane.preinst: - + Remove obsolete /etc/modprobe.d/libsane conffile. - * debian/patches/30_new_saned.dpatch: - + Updated; workaround for backends writing to stdin/stderr/stdout when - run via inetd, which breaks the network dialog and causes the remote - net backend to crash. (Closes: #516982) - - -- Julien BLACHE <jblache@debian.org> Wed, 04 Mar 2009 10:49:42 +0100 - -sane-backends (1.0.19-25) unstable; urgency=low - - * debian/rules: - + Remove comment bit, breaking configure invocation. - * debian/control: - + Add ${misc:Depends}. - * debian/sane-utils.postrm: - + Make the script set -e. - * debian/patches/30_new_saned.dpatch: - + Updated; (net backend) do not attempt to lock the Avahi polling - thread before stopping it, it now produces a deadlock. Looks like - a change/fix was made in Avahi. (Closes: #513122) - - -- Julien BLACHE <jblache@debian.org> Wed, 18 Feb 2009 11:50:31 +0100 - -sane-backends (1.0.19-24) unstable; urgency=low - - * debian/rules: - + Enable use of pthread instead of fork for reader processes. - * debian/libsane.postinst: - + Remove code dealing with devfs/hotplug/hotplug-ng. - * debian/patches/11_minimum_linkage.dpatch: - + Update; add $(LIBPTHREAD) to library dependencies where needed. - - -- Julien BLACHE <jblache@debian.org> Sun, 15 Feb 2009 11:50:13 +0100 - -sane-backends (1.0.19-23) unstable; urgency=low - - * debian/patches/09_avision_fixes.dpatch: - + Updated; fix reader task handling to not signal the whole process group - erroneously. - * debconf translations: - + it.po: courtesy of Luca Monducci. (Closes: #507563) - - -- Julien BLACHE <jblache@debian.org> Tue, 09 Dec 2008 16:14:06 +0100 - -sane-backends (1.0.19-22) unstable; urgency=low - - * debian/patches/41_epjitsu_fixes.dpatch: - + Added; from CVS, fix double-free issues in epjitsu. (Closes: #506750) - - -- Julien BLACHE <jblache@debian.org> Mon, 24 Nov 2008 15:02:04 +0100 - -sane-backends (1.0.19-21) unstable; urgency=low - - * debian/rules: - + Use an error handler for saned's init. - * debian/sane-utils.postinst: - + Added error handler for saned init. (Closes: #493745) - * debconf translations: - + es.po: courtesy of Ignacio Mondino. (Closes: #499202) - - -- Julien BLACHE <jblache@debian.org> Fri, 19 Sep 2008 10:50:04 +0200 - -sane-backends (1.0.19-20) unstable; urgency=low - - * debian/control: - + Make sane-utils depend on update-inetd (>= 4.31) which won't break - with debconf. - * debian/sane-utils.postinst: - + update-inetd needs debconf sometimes, so keep debconf enabled until - after the update-inetd call. - - -- Julien BLACHE <jblache@debian.org> Fri, 05 Sep 2008 11:04:59 +0200 - -sane-backends (1.0.19-19) unstable; urgency=low - - * debian/rules: - + Install umax_pp into sane-utils. (Closes: #496833) - * debian/patches/40_fujitsu_fixes.dpatch: - + Added; upstream backport of fujitsu backend fixes, fixes a string - initialization issue in config file parsing, adds color mode for the - fi-6130, 6230, 6140, 6240 and fixes fi-6230 hangs at wakeup from - powersave mode. (Closes: #494156) Thanks to M. Allan Noah for - providing a backport. - - -- Julien BLACHE <jblache@debian.org> Thu, 28 Aug 2008 10:31:35 +0200 - -sane-backends (1.0.19-18) unstable; urgency=low - - * debian/patches/10_sm3840_unbreak_sane_open.dpatch: - + Added; from CVS, fix the way sane_open() checks for sanei_usb_open() - errors. (Closes: #496249) - * debconf translations: - + ja.po: courtesy of Hideki Yamane. (Closes: #493568) - - -- Julien BLACHE <jblache@debian.org> Wed, 27 Aug 2008 19:58:15 +0200 - -sane-backends (1.0.19-17) unstable; urgency=low - - * debian/patches/33_scanimage_options_fix.dpatch: - + Added; get the option descriptor for option 0 before getting the value - for option 0. This is a standard-compliance fix needed for proper - operation with the net backend. - * debian/patches/30_new_saned.dpatch: - + Updated; fix initialization of runas_{g,u}id and ngroups, preventing - failures later on in some cases (saned -a without username). - - -- Julien BLACHE <jblache@debian.org> Tue, 05 Aug 2008 12:10:44 +0200 - -sane-backends (1.0.19-16) unstable; urgency=low - - * debian/patches/30_new_saned.dpatch: - + Updated; Fix seteuid()/setegid() call order and set supplemental group - list. (Closes: #493084) - - -- Julien BLACHE <jblache@debian.org> Thu, 31 Jul 2008 11:46:53 +0200 - -sane-backends (1.0.19-15) unstable; urgency=low - - * debian/patches/09_avision_fixes.dpatch: - + Enable this patch for real. - * debian/patches/31_sanei_pthread_64bit_fix.dpatch: - + Updated. - - -- Julien BLACHE <jblache@debian.org> Tue, 22 Jul 2008 23:05:50 +0200 - -sane-backends (1.0.19-14) unstable; urgency=low - - * debian/patches/32_net_backend_standard_fix.dpatch: - + Updated; fix sane_control_option() in the net backend so as to bring - the net backend behaviour back in line with standard backends. This - should fix some issues reported with the net backend lately. - * debian/patches/01_manpages_fixes.dpatch: - + Updated; fix some more hyphen vs. minus sign issues. - * debian/rules: - + Include debug symbols for sane-utils into libsane-dbg. - * debian/copyright: - + Update. - - -- Julien BLACHE <jblache@debian.org> Sun, 20 Jul 2008 12:51:25 +0200 - -sane-backends (1.0.19-13) unstable; urgency=low - - * debian/libsane.README.Debian: - + Fix udev rules filename. (Closes: #490656) - * debian/patches/01_manpages_fixes.dpatch: - + Updated; fix hyphen vs. minus sign issues reported by lintian. - * debian/patches/30_new_saned.dpatch: - + Updated; manpage fixes. - - -- Julien BLACHE <jblache@debian.org> Mon, 14 Jul 2008 13:17:44 +0200 - -sane-backends (1.0.19-12) unstable; urgency=low - - * debian/control: - + Bump Standards-Version to 3.8.0 (no changes). - * debian/patches/30_new_saned.dpatch: - + Updated; properly terminate child processes when exiting from the - debug mode. - * debian/patches/32_net_backend_standard_fix.dpatch: - + Added; do not reload the option descriptors cache behind the frontend's - back in sane_control_option(). Fetch options descriptors in sane_open() - so GET_VALUE on option 0 can still work without explicitely getting - option descriptor 0 first. - * debconf translations: - + sv.po: courtesy of Martin Bagge. (Closes: #487369) - - -- Julien BLACHE <jblache@debian.org> Tue, 24 Jun 2008 22:10:35 +0200 - -sane-backends (1.0.19-11) unstable; urgency=low - - * debian/patches/30_new_saned.dpatch: - + Updated; lock the Avahi thread before stopping it and tearing down the - Avahi objects. (Closes: #484464) - * debian/patches/09_avision_fixes.dpatch: - + Added; from CVS, misc avision backend fixes. (Closes: #474706, #475198) - * debconf translations: - + ru.po: courtesy of Yuri Kozlov. (Closes: #481656) - - -- Julien BLACHE <jblache@debian.org> Fri, 06 Jun 2008 17:37:28 +0200 - -sane-backends (1.0.19-10) unstable; urgency=low - - * debian/sane-utils.postinst: - + Make proper use of debconf !@#%$. (Closes: #481442) - * debconf translations: - + fr.po: update by Christian Perrier. (Closes: #481439) - - -- Julien BLACHE <jblache@debian.org> Fri, 16 May 2008 19:26:48 +0200 - -sane-backends (1.0.19-9) unstable; urgency=low - - * debian/sane-utils.postinst: - + Do not attempt to remove saned from the scanner group if it isn't part - of the group in the first place. (Closes: #481288) - * debian/patches/31_sanei_pthread_64bit_fix.dpatch: - + Added; from CVS, fix sanei_pthread on 64bit platforms. - - -- Julien BLACHE <jblache@debian.org> Thu, 15 May 2008 18:54:37 +0200 - -sane-backends (1.0.19-8) unstable; urgency=low - - * Reupload 1.0.19-7 to unstable. - - * debconf translations: - + pt.po: courtesy of Américo Monteiro. (Closes: #480219) - + cs.po: courtesy of Miroslav Kure. (Closes: #480313) - + de.po: courtesy of Helge Kreutzmann. (Closes: #480366) - + vi.po: courtesy of Clytie Siddall. (Closes: #480483) - + fi.po: courtesy of Esko Arajärvi. (Closes: #480550) - + fr.po: update by Christian Perrier. - - -- Julien BLACHE <jblache@debian.org> Wed, 14 May 2008 19:13:29 +0200 - -sane-backends (1.0.19-7) experimental; urgency=low - - * Introducing new saned & net backend features. - + saned can now run as a standalone daemon and offers mDNS/DNS-SD. - The net backend can discover saned servers on the (local) network. - * debian/patches/01_manpages_fixes.dpatch: - + Fix man warnings in sane-config.1 and sane-mustek_pp.5. - * debian/patches/30_new_saned.dpatch: - + Added; from CVS HEAD, backport new saned and net backend. - * debian/sane-utils.README.Debian: - + Enhancements, typo fixes. - * debian/sane-utils.templates, debian/sane-utils.config, - debian/sane-utils.postinst: - + Add a debconf question to automatically add the saned user to the - scanner group. - + Add a debconf question to enable saned as a standalone daemon. - * debian/rules: - + Enable Avahi support at configure time. - + Call dh_installdebconf. - + Call dh_installinit. - * debian/control: - + Build-Depend on po-debconf, libavahi-client-dev (>= 0.6.4). - + sane-utils: add ${misc:Depends} to get the appropriate debconf - dependencies. - + sane-utils: recommend avahi-daemon. - + libsane: recommend avahi-daemon. - + libsane-dev: depend on libavahi-client-dev. - * debian/sane-utils.saned.init, debian/sane-utils.saned.default: - + Add an initscript & default file for saned. - - * debconf translations: - + eu.po: courtesy of Piarres Beobide. (Closes: #479380, #479808) - + fr.po: courtesy of Christian Perrier. - + pt_BR.po: courtesy of Eder L. Marques. (Closes: #479785) - + gl.po: courtesy of Jacobo Tarrio. (Closes: #479838) - - -- Julien BLACHE <jblache@debian.org> Wed, 07 May 2008 18:37:07 +0200 - -sane-backends (1.0.19-6) unstable; urgency=low - - * debian/patches/08_epson2_be_nice_to_saned.dpatch: - + Added; from CVS, be nice to saned and do not pollute fd 0. - (Closes: #479052) - - -- Julien BLACHE <jblache@debian.org> Sat, 03 May 2008 16:46:12 +0200 - -sane-backends (1.0.19-5) unstable; urgency=low - - * debian/patches/07_epson2_be_nice.dpatch: - + Added; from CVS, be nice to other backends and close the scanner device - when the device is not recognized (or another error happens). - (Closes: #476468) - - -- Julien BLACHE <jblache@debian.org> Sat, 19 Apr 2008 17:16:13 +0200 - -sane-backends (1.0.19-4) unstable; urgency=low - - * debian/patches/03_snapscan_usb_ftok_fix.dpatch: - + Updated; improve the patch by falling back to ftok() for non-libusb - devices. - * debian/patches/04_sane-desc_hal_new.dpatch: - + Added; add support for newer HAL versions. - * debian/patches/05_hp_timing_fix.dpatch: - + Added; fix timing issue with HP scanners. (Closes: #472819) - * debian/patches/06_sanei_scsi_attach_fix.dpatch: - + Added; from CVS, continue to iterate over the list of devices even - if an attempt to attach one of the devices fails. - * debian/rules: - + Generate HAL FDI file for newer HAL versions. (Closes: #472664) - * debian/libsane-dev.doc-base: - + Fix doc-base section. - - -- Julien BLACHE <jblache@debian.org> Fri, 28 Mar 2008 22:39:17 +0100 - -sane-backends (1.0.19-3) unstable; urgency=low - - * debian/patches/01_disable_epson2.dpatch: - + Removed; reenable the epson2 backend. - * debian/patches/03_snapscan_usb_ftok_fix.dpatch: - + Added; work around the usage of ftok() in the snapscan backend. See - the patch description for details. (Closes: #466855) - - -- Julien BLACHE <jblache@debian.org> Sat, 15 Mar 2008 16:16:38 +0100 - -sane-backends (1.0.19-2) unstable; urgency=low - - * debian/patches/02_pixma_update.dpatch: - + Added; update pixma backend from CVS, adding support for - - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710 - - MP140, MP220, MultiPASS MP740 (untested) - - MP970 (experimental, untested) - (Closes: #468270) - * debian/rules: - + Generate and install HAL fdi file. (Closes: #466540) - * debian/control: - + Add update-inetd dependency for sane-utils. - * debian/sane-utils.postinst, debian/sane-utils.postrm: - + Add support for update-inetd. (Closes: #426514) - * debian/sane-utils.README.Debian: - + Document update-inetd usage. - - -- Julien BLACHE <jblache@debian.org> Sat, 01 Mar 2008 14:11:29 +0100 - -sane-backends (1.0.19-1) unstable; urgency=low - - * New upstream release. - + New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based - Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and - more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005 - and more), hs2p (Ricoh IS400 series) - + Fix for the pixma backend. (Closes: #459663) - + Regression fix for the avision backend. (Closes: #458478, #458932) - * debian/patches/02_hurd_no_plustek_pp.dpatch: - + Removed; merged upstream. - * debian/patches/11_minimum_linkage.dpatch: - + Updated. - * debian/patches/12_new_configure.dpatch: - + Updated. - * debian/control: - + Adjust libsane-extras dependencies for 1.0.19. - - -- Julien BLACHE <jblache@debian.org> Tue, 12 Feb 2008 21:44:19 +0100 - -sane-backends (1.0.19~cvs20071213-5) unstable; urgency=low - - * debian/control: - + Build-Depends: xutils-dev instead of xutils. - + Depend on libsane-extras{,-dev,-dbg} to help fix up the - buggy udev rules in libsane-extras. - + Promote libgphoto2-2-dev to Depends: for libsane-dev. - * debian/patches/02_hurd_no_plustek_pp.dpatch: - + Added; do not build plustek_pp on Hurd. (Closes: #457378) - * debian/patches/12_new_configure.dpatch: - + Updated. - - -- Julien BLACHE <jblache@debian.org> Mon, 07 Jan 2008 12:07:27 +0100 - -sane-backends (1.0.19~cvs20071213-4) unstable; urgency=low - - * debian/patches/11_minimum_linkage.dpatch: - + Updated; add libcam for coolscan & umax, remove it for cardscan. - - -- Julien BLACHE <jblache@debian.org> Mon, 31 Dec 2007 14:11:34 +0100 - -sane-backends (1.0.19~cvs20071213-3) unstable; urgency=low - - * debian/control: - + Tighten relationship with libsane-extras due to the udev rules renaming. - - -- Julien BLACHE <jblache@debian.org> Fri, 28 Dec 2007 11:45:30 +0100 - -sane-backends (1.0.19~cvs20071213-2) unstable; urgency=low - - * debian/rules: - + Generate udev rules as debian/libsane.udev, clean as needed. - + Use dh_installudev. - + Remove libsane-dll.* from /usr/lib/sane; libsane.so and libsane-dll.so - are the same backend. - * debian/libsane.postinst: - + Remove udev installation code. - * debian/libsane.preinst: - + Added; handle upgrade from previous udev code to dh_installudev. - * debian/patches/11_minimum_linkage.dpatch: - + Added; only link backends to the libraries they need. - * debian/patches/12_new_configure.dpatch: - + Added; new configure script. - * debian/patches/12_gphoto2_link_backend_only.dpatch: - + Removed; obsoleted by 11_minimum_linkage.dpatch. - * debian/patches/13_new_configure.dpatch: - + Removed; now 12_new_configure.dpatch. - - -- Julien BLACHE <jblache@debian.org> Tue, 25 Dec 2007 22:58:26 +0100 - -sane-backends (1.0.19~cvs20071213-1) unstable; urgency=low - - * New CVS snapshot. - + New backend: hp3900. - * debian/control: - + Bump Standards-Version to 3.7.3 (no changes). - + Bump libsane-extras{,-dev} dependencies/conflicts/replaces to 1.0.18.13. - + Remove module-init-tools recommendation, enforced by udev which is a - dependency. - * debian/rules: - + Remove ${module-init-tools} substvar. - - -- Julien BLACHE <jblache@debian.org> Thu, 13 Dec 2007 21:59:02 +0100 - -sane-backends (1.0.19~cvs20071028-1) unstable; urgency=low - - * New CVS snapshot. - + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT. - (Closes: #448162) - + Fixed USB IDs for the Epson CX-6600. (Closes: #419349) - + Added USB IDs for the Epson DX-6000. (Closes: #442051) - * debian/control: - + libsane-dev Recommends: libgphoto2-2-dev. - - -- Julien BLACHE <jblache@debian.org> Sun, 28 Oct 2007 11:17:36 +0100 - -sane-backends (1.0.19~cvs20070730-1) unstable; urgency=low - - * New CVS snapshot. - + Workaround for CONFIG_USB_SUSPEND. (Closes: #434276) - * debian/control, debian/rules: - + Make libsane depend on makedev | udev on Linux. (Closes: #428220) - * debian/libsane.postinst: - + Change MAKEDEV invocation to invoke /dev/MAKEDEV instead of /sbin/MAKEDEV. - * debian/control: - + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386. - (Closes: #434575) - + Use ${binary:Version} instead of ${Source-Version}. - * debian/rules: - + Do not ignore make distclean errors. - * debian/patches/30_sanei_scsi_sg_ioctl.dpatch: - + Removed; merged upstream. - - -- Julien BLACHE <jblache@debian.org> Mon, 30 Jul 2007 14:03:13 +0200 - -sane-backends (1.0.19~cvs20070505-3) unstable; urgency=low - - * debian/patches/30_sanei_scsi_sg_ioctl.dpatch: - + Added; use the SG_IO ioctl interface instead of the asynchronous - read/write SG3 interface. This allows the use of SCSI scanners in - mixed 32/64bit environments, thanks to the ioctl 32bit compatibility - layer taking care of the 32/64bit sg_hdr conversion. (Closes: #420193) - - If you own a SCSI scanner, please report back on this change; especially - if, compared to the previous version (1.0.19~cvs20070505-2): - - the scanner backtracks more than it used to with the previous version - - you see weird errors OR you see no error and you should be seeing some - - performance sucks - - resulting image is broken in one way or another - - ... - - -- Julien BLACHE <jblache@debian.org> Sun, 20 May 2007 10:46:00 +0200 - -sane-backends (1.0.19~cvs20070505-2) unstable; urgency=low - - * debian/patches/01_disable_epson2.dpatch: - + Added; disable epson2 backend by default. (Closes: #422697) - - -- Julien BLACHE <jblache@debian.org> Sat, 12 May 2007 10:37:11 +0200 - -sane-backends (1.0.19~cvs20070505-1) unstable; urgency=low - - * New CVS snapshot. - + New backend: hp5590. - * debian/patches/31_epson_remove_check.dpatch: - + Removed; merged upstream. - - -- Julien BLACHE <jblache@debian.org> Sat, 05 May 2007 20:37:07 +0200 - -sane-backends (1.0.19~cvs20070421-1) unstable; urgency=low - - * debian/control: - + Update Build-Depends for the TeXLive migration. - + Removed old Conflicts. - + Upgrade libsane-extras minimum version to 1.0.18.6. - * debian/rules: - + Drop hotplug support. - + Drop code for Sarge backports. - * debian/libsane.postinst: - + Remove old hotplug-ng files, code taken from Ubuntu. - * debian/libsane.README.Debian, debian/sane-utils.README.Debian: - + Removed hotplug notes. - * debian/patches/03_usb_perms_664.dpatch: - + Removed; merged upstream. - * debian/patches/11_hotplug_wait_for_device.dpatch: - + Removed; not needed anymore. - * debian/patches/30_udev_long_comment_lines.dpatch: - + Removed; merged upstream. - * debian/patches/32_microtek2_add_check.dpatch: - + Removed; merged upstream. - * debian/patches/33_manpages_fixes.dpatch: - + Removed; merged upstream. - - -- Julien BLACHE <jblache@debian.org> Sat, 21 Apr 2007 13:33:26 +0200 - -sane-backends (1.0.18-6) unstable; urgency=low - - * Enable libieee1284 support on kFreeBSD-amd64. (Closes: #413178) - * debian/control: - + Build-depend on libieee1284-3-dev (>= 0.2.10-5) for all architectures. - + libsane-dev depends on libieee1284-3-dev (>= 0.2.10-5) for all architectures. - * debian/rules: - + Remove the libieee1284-3-dev substitution variable. - - -- Julien BLACHE <jblache@debian.org> Sat, 3 Mar 2007 11:39:33 +0100 - -sane-backends (1.0.18-5) unstable; urgency=medium - - * debian/patches/32_microtek2_add_check.dpatch: - + Added; Add missing return status check, preventing a segfault later - on. (Closes: #398153) - * debian/patches/33_manpages_fixes.dpatch: - + Added; fix man warnings in some manpages. - - -- Julien BLACHE <jblache@debian.org> Mon, 8 Jan 2007 19:52:22 +0100 - -sane-backends (1.0.18-4) unstable; urgency=medium - - * debian/patches/31_epson_remove_check.dpatch: - + Added; Remove bogus check in epson backend get_identity2_information() - affecting Stylus CX5xxx models. (Closes: #399119, #402444) - * debian/sane-utils.README.Debian: - + Fix typo, the manpage for saned is in section 8 not 1. - * debian/control: - + libsane-dbg is Priority: extra. - + Remove Uploaders. - - Thank you Aurélien JARNO for your help during these years. - - -- Julien BLACHE <jblache@debian.org> Sat, 6 Jan 2007 18:46:43 +0100 - -sane-backends (1.0.18-3) unstable; urgency=low - - * debian/patches/30_udev_long_comment_lines.dpatch: - + Added; split very long comment lines in the udev rules file. - (Closes: #376859) - * debian/libsane.README.Debian: - + Updated; udev no longer sets permissions on /proc/bus/usb/xxx/yyy, - /dev/bus/usb/xxx/yyy is used instead now. - - -- Julien BLACHE <jblache@debian.org> Sun, 30 Jul 2006 20:40:09 +0200 - -sane-backends (1.0.18-2) unstable; urgency=low - - * debian/control: - + Build-Depends: libltdl3-dev, needed to link with libgphoto2-2. - + sane-utils Suggests: unpaper. - - -- Julien BLACHE <jblache@debian.org> Tue, 4 Jul 2006 09:09:04 +0200 - -sane-backends (1.0.18-1) unstable; urgency=low - - * New upstream release. - + New backends: dell1600n_net, hp3500, pixma, stv680. (Closes: #360303) - + Canon LiDE 60 USBids added to the genesys description file. (Closes: #366871) - * debian/patches/01_usbids.dpatch: - + Removed; merged upstream. - * debian/patches/26_manpages_spelling_fixes.dpatch: - + Removed; merged upstream. - * debian/patches/25_glibc_sys_io_h.dpatch: - + Removed; merged upstream. - * debian/patches/03_usb_perms_664.dpatch: - + Updated; the convert-usermap.sh scripts are gone. - * debian/patches/04_udev_rules_fix.dpatch: - + Removed; merged upstream. - * debian/rules: - + Use sane-desc to generate the udev rules file and the hotplug data file. - + Improve manpage list generation for the libsane package. - * debian/control: - + Build-Depends: libtiff4-dev, for the dell1600n_net backend. - - -- Julien BLACHE <jblache@debian.org> Mon, 3 Jul 2006 20:30:17 +0200 - -sane-backends (1.0.17-4) unstable; urgency=low - - * debian/compat: - + Bumped DH_COMPAT to 5. - * debian/control: - + Bumped Standards-Version to 3.7.2 (no changes). - + Build-Depend on debhelper (>= 5.0.0) for DH_COMPAT=5. - + New libsane-dbg binary for debugging symbols. (Closes: #366767) - * debian/rules: - + Tell dh_strip to put debugging symbols into libsane-dbg. - - -- Julien BLACHE <jblache@debian.org> Fri, 26 May 2006 13:40:01 +0200 - -sane-backends (1.0.17-3) unstable; urgency=low - - * debian/control: - + Add ${libieee1284-3-dev} to libsane-dev Depends. (Closes: #364294) - - -- Julien BLACHE <jblache@debian.org> Sat, 22 Apr 2006 19:58:12 +0200 - -sane-backends (1.0.17-2) unstable; urgency=low - - [ Aurélien JARNO ] - * debian/control: - + Build-depends: libcam-dev on kfreebsd-i386 and kfreebsd-amd64. - + Build-depends: !libieee1284-dev on kfreebsd-amd64. - + libsane-dev depends: libcam-dev on GNU/kFreeBSD. - * debian/patches/25_glibc_sys_io_h.dpatch: - + New; check for GNU libc instead of Linux kernel. - - [ Julien BLACHE ] - * debian/patches/02_udev_rules.dpatch: - + Removed; coldplugging now works OK, the hotplug script aren't needed - anymore. (Closes: #359800) - * debian/patches/03_usb_perms_664.dpatch: - + Updated. - * debian/patches/04_udev_rules_fix.dpatch: - + Added; fix udev rules file so that the rules only run for ACTION=add - on the usb subsystem. (Closes: #359797) - * debian/patches/01_usbids.dpatch: - + Added; add Epson Stylus CX7800 USB IDs. (Closes: #350436) - * debian/patches/26_manpages_spelling_fixes.dpatch: - + Added; various spelling fixes to the manpages. (Closes: #357568) - * debian/control: - + Removed Conflicts: on very old SANE versions. - + Recommends: module-init-tools (>= 3.2.2-1). (Closes: #344541) - + Recommends: udev (>= 0.88-1) for a version of udev with working - coldplugging support. Let me know if the version can be lowered, - thanks. - * debian/rules: - + Add variable substitution for module-init-tools on Linux. - + Add version to the udev variable substitution. - - -- Julien BLACHE <jblache@debian.org> Thu, 13 Apr 2006 21:40:58 +0200 - -sane-backends (1.0.17-1) unstable; urgency=low - - [ Julien BLACHE ] - * New upstream release. - + New backends: hp4200, lexmark, mustek_usb2. - + Now ignores EBUSY on set_configuration for real. (Closes: #332281) - + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters. (Closes: #341046) - * debian/patches/01_hotplug_usbids.dpatch: - + Removed; merged upstream. - * debian/patches/02_tools_udev.dpatch: - + Removed; merged upstream. - * debian/patches/02_udev_rules.dpatch: - + Added; add a RUN rule to run the hotplug.d script (for coldplugging). - * debian/control: - + Build-Depends: xutils as makedepend is now used by the build system. - + Adjust conflicts/suggests for libsane-extras. - - [ Aurélien JARNO ] - * debian/patches/03_usb_perms_664.dpatch: - + Added; lsusb needs read access to USB devices to work properly. - - -- Julien BLACHE <jblache@debian.org> Sun, 18 Dec 2005 17:09:47 +0100 - -sane-backends (1.0.16-5) unstable; urgency=low - - * debian/patches/02_tools_udev.dpatch: - + Run the hotplug.d script to ensure a working coldplug. (Closes: #334068) - * debian/patches/30_misc_fixes.dpatch: - + Fix a typo in sane-find-scanner(1). (Closes: #310333) - * debian/patches/34_sanei_usb_ignore_set_config_ebusy.dpatch: - + Ignore EBUSY on set_configuration to better accomodate MFC devices. (Closes: #332281) - * debian/libsane.postrm: - + Remove /etc/udev/rules.d/025_libsane.rules on purge. (Closes: #333569) - - -- Julien BLACHE <jblache@debian.org> Thu, 27 Oct 2005 20:25:16 +0200 - -sane-backends (1.0.16-4) unstable; urgency=low - - * debian/patches/02_tools_udev.dpatch: - + Fix broken tools/udev/convert-usermap.sh script. - - -- Julien BLACHE <jblache@debian.org> Wed, 28 Sep 2005 22:59:41 +0200 - -sane-backends (1.0.16-3) unstable; urgency=low - - * The udev release. Thanks to Marco d'Itri for his help. - * debian/patches/02_tools_udev.dpatch: - + Added; adds tools/udev from CVS. - * debian/rules: - + Generate the udev rules file for libsane and install it. - + Generate a modprobe blacklist (same as the hotplug blacklist). - * debian/libsane.postinst: - + Symlink the udev rules file under /etc/udev/rules.d; do that only once. - * debian/control: - + Recommends: hotplug | udev - - -- Julien BLACHE <jblache@debian.org> Wed, 28 Sep 2005 22:42:38 +0200 - -sane-backends (1.0.16-2) unstable; urgency=low - - * debian/patches/11_hotplug_wait_for_device.dpatch: - + Bump timeout to 25 seconds. - * debian/patches/01_hotplug_usbids.dpatch: - + Added; pulled from CVS. (Closes: #323607) - * debian/patches/32_plustek_update.dpatch: - + Supersedes 32_add_lide25.dpatch; plustek backend update, adds LiDE 25 - support and fixes LiDE 20 support. - * debian/patches/33_sm3600_update.dpatch: - + Added; pulled from CVS, sm3600 adapted to sanei_usb. - - -- Julien BLACHE <jblache@debian.org> Sun, 28 Aug 2005 18:33:18 +0200 - -sane-backends (1.0.16-1) unstable; urgency=low - - [ Julien BLACHE ] - * New upstream release. - + New backends: sm3840, genesys. - + Fixed typos in manpages. (Closes: #310332, #310333) - * Patches removed (integrated upstream): - + 01_hotplug_usbids.dpatch - + 02_tools_hotplug-ng.dpatch - + 03_manpages_fixes.dpatch - + Most of 30_misc_fixes.dpatch - + 31_gt68xx_fixes.dpatch - + 32_snapscan_update.dpatch - + 33_avision_update.dpatch - + 34_plustek_update.dpatch - + 35_libusbscanner_2.6_fixes.dpatch - + 36_sane-find-scanner_message.dpatch - + 37_epson_usbids.dpatch - * debian/libsane.postinst: - + Removed the udev check, it's broken and MAKEDEV now does the Right - Thing (tm) on its own. (Closes: #310216) - + Remove anything debconf-related. - * debian/control: - + Bumped Standards-Version to 3.6.2 (no changes). - + Update the conflict on libsane-extras. - + Downgrade Depends: sane-utils to Recommends: sane-utils now that Sarge - has been released. - + Drop dependency on debconf. - * debian/rules: - + Generate sane-backends.pot, patch from Martin Pitt. (Closes: #313527) - + Comment call to dh_installdebconf, we don't use debconf anymore. - - [ Aurélien JARNO ] - * DEB_HOST_GNU_SYSTEM replaced by DEB_HOST_ARCH_OS. - * Get rid of debian/control.in by using the -V option of dpkg-gencontrol. - - -- Julien BLACHE <jblache@debian.org> Sun, 7 Aug 2005 15:00:05 +0200 - -sane-backends (1.0.15-10) unstable; urgency=low - - * debian/patches/01_hotplug_usbids.dpatch: - + Updated; added Genius ColorPage Vivid3XE. (Closes: #305993) - + Added Microtek ScanMaker 3700. (Closes: #307952) - + Added Epson Stylus RX620. (Closes: #308867) - * debian/patches/11_hotplug_wait_for_device.dpatch: - + Added; try to wait for the device to appear in the FS. (Closes: #302891) - * debian/patches/30_misc_fixes.dpatch: - + Updated; fixed "device model referenced not duplicated" in the v4l - backend. (Closes: #306458) - * debian/control.in: - + Build-Depend on a fixed libusb. - - -- Julien BLACHE <jblache@debian.org> Sun, 22 May 2005 11:09:19 +0200 - -sane-backends (1.0.15-9) unstable; urgency=low - - * debian/patches/22_dll_backend_conf.dpatch: - + Process /etc/sane.d/dll.d first, so that those backends will be loaded - last. This will prevent buggy extras backends to perturb other backends. - * debian/patches/03_manpages_fixes.dpatch: - + Fix a typo in sane(7), reported by A Costa. (Closes: #302675) - + Fix 3 typos in scanimage(1), also reported by A Costa. (Closes: #302334) - - -- Julien BLACHE <jblache@debian.org> Wed, 20 Apr 2005 16:17:20 +0200 - -sane-backends (1.0.15-8) unstable; urgency=low - - [ Aurélien Jarno ] - * Drop support for the scanner kernel module. Switch to libusb NOW. - + Drop the devfs config file, remove /etc/devfs/conf.d/devfs - in libsane.postinst. - * Transition to the new hotplug hook scheme (pulled from CVS), which is - compatible with both hotplug and hotplug-ng. - + Remove /etc/hotplug/usb/libsane.usermap and /etc/hotplug/usb/libusbscanner - in libsane.postinst. - + Conflicts with libsane-extras (<< 1.0.15.7) to avoid partial upgrades, as - 1.0.15.7 is the version compatible with the new hotplug script. - - [ Julien Blache ] - * Added support for GNU/kFreeBSD. (Closes: #297979) - + debian/rules: generate control at clean time. - + debian/rules: install README.{linux,freebsd} depending on the system. - + debian/patches/23_unneeded_doc.dpatch: do not install OS-specific READMEs. - + debian/control.in: do not depend on makedev on !linux (via debian/rules). - + debian/libsane.postinst: do not create device nodes on !linux. - * debian/rules: - + Install only the manpages for the backends which have been built. - + Cut the head of libsane.usermap to remove the comments pertaining to the - old usermap format. - * debian/libsane.README.Debian: - + Updated to relfect the hotplug changes. - * debian/libsane.postinst: - + Do not create device nodes when udev is in use. - - -- Julien BLACHE <jblache@debian.org> Sun, 6 Mar 2005 00:36:43 +0100 - -sane-backends (1.0.15-7) unstable; urgency=low - - [ Julien BLACHE ] - * debian/patches/22_dll.conf_debian.dpatch - + Removed; renamed to 22_dll_backend_conf.dpatch. - * debian/patches/22_dll_backend_conf.dpatch - + Added; adds a Debian-specific comment to the dll.conf file, and patches - the dll backend to look for pieces of dll.conf in the /etc/sane.d/dll.d - directory; this is a facility for packages providing external backends, - like libsane-extras, hpoj and hplip. - - [ Aurélien Jarno ] - * debian/patches/01_hotplug_usbids.dpatch - + Added Epson Corp. Stylus CX6600 to libsane.usermap. (Closes: #293082) - - -- Julien BLACHE <jblache@debian.org> Mon, 21 Feb 2005 16:43:41 +0100 - -sane-backends (1.0.15-6) unstable; urgency=low - - * debian/control - + Recommends: hotplug (was Suggests: hotplug). - + Suggests: hpoj, hplip. - * debian/rules - + Blacklist the scanner module wrt hotplug. - * debian/libsane.README.Debian - + Explain that the scanner module is going away, and that we're now - blacklisting it wrt hotplug upon installation of the package. - * debian/patches/01_hotplug_usbids.dpatch - + Updated; added Epson Stylus RX-425. - * debian/patches/37_epson_usbids.dpatch - + Added; adds Epson Stylus RX-425. - * debian/patches/30_misc_fixes.dpatch - + Updated; added initialization of dev->scanning in coolscan.c. - * debian/patches/02_manpages_fixes.dpatch - + Added; manpages fixes from esr. - * debian/patches/32_snapscan_deinterlacer.dpatch - + Removed; renamed to 32_snapscan_update.dpatch. - * debian/patches/32_snapscan_update.dpatch - + Added; contains all of the previous 32_snapscan_deinterlacer.dpatch, - plus it adds support for the Epson Perfection 1270, BenQ 5250C and - quality calibration for the Epson Perfection 2480. - * debian/patches/22_dll.conf_debian.dpatch - + Updated; added the sm3840 backend provided by libsane-extras and the - hpaio backend provided by hplip. (Closes: #291435) - * debian/patches/38_artec_e+48_conf.dpatch - + Added; adds proper configuration for the Umax AstraSlim SE. - - -- Julien BLACHE <jblache@debian.org> Sat, 22 Jan 2005 13:54:58 +0100 - -sane-backends (1.0.15-5) unstable; urgency=medium - - * debian/patches/34_plustek_update.dpatch: - + Added; pulled from CVS, contains fixes for Epson Perfection 1260 - scanners. (Closes: #290029) - * debian/patches/35_libusbscanner_2.6_fixes.dpatch: - + Added; applied patch from Martin Pitt to use sysfs to determine the - device number, instead of guessing it in a semi-broken way. - (Closes: #289666) - * debian/patches/36_sane-find-scanner_message.dpatch - + Added; adds a "make sure your scanner is powered up and plugged in" - message to sane-find-scanner. (Closes: #287592) - - -- Julien BLACHE <jblache@debian.org> Wed, 12 Jan 2005 17:48:30 +0100 - -sane-backends (1.0.15-4) unstable; urgency=medium - - * debian/control: - + Added build-dependency on pkg-config. (Closes: #286140) - * debian/patches/13_new_configure.dpatch: - + Fixed; remove unwanted autom4te.cache directory from the patch. - (Closes: #286143) - - -- Julien BLACHE <jblache@debian.org> Sun, 19 Dec 2004 18:08:23 +0100 - -sane-backends (1.0.15-3) unstable; urgency=low - - * debian/patches/31_gt68xx_fixes.dpatch: - + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners. - (Closes: #284674) - * debian/patches/33_avision_update.dpatch: - + Added; improved avision backend from CVS. - - -- Julien BLACHE <jblache@debian.org> Thu, 9 Dec 2004 16:01:50 +0100 - -sane-backends (1.0.15-2) unstable; urgency=low - - * debian/patches/01_hotplug_usbids.dpatch: - + Added; taken from CVS, adds missing USB IDs to the hotplug scripts. - (Closes: #280821, #281003) - * debian/patches/31_gt68xx_fixes.dpatch: - + Added; taken from CVS, fixes incorrect mode check for some scanners. - (Closes: #281061) - * debian/patches/30_misc_fixes.dpatch: - + Added; miscellaneous fixes from CVS/sane-devel. - * debian/patches/32_snapscan_deinterlacer.dpatch: - + Added; taken from CVS, adds a deinterlacer filter to the snapscan - backend, which is needed to scan at 2400 DPI with some scanners. - - -- Julien BLACHE <jblache@debian.org> Sun, 14 Nov 2004 15:39:36 +0100 - -sane-backends (1.0.15-1) unstable; urgency=low - - * New upstream release. - + Patch for Microtek Phantom C6 on PowerPC merged upstream. - (Closes: #274523) - + New backend: niash. - * debian/control: - + Update conflicts/replaces on libsane-extras 1.0.15.1. - * debian/patches/01_libusbscanner.dpatch: - + Removed; taken from CVS, included in this version. - * debian/patches/02_epson_usbids.dpatch: - + Removed; taken from CVS, included in this version. - * debian/patches/03_hotplug_usbids.dpatch: - + Removed; merged upstream. - * debian/patches/11_libtool_unneeded_checks.dpatch: - + Removed. - * debian/patches/12_gphoto2_link_backend_only.dpatch: - + Updated; revert unwanted backend/Makefile.in patch causing an incorrect - rpath in /usr/lib/libsane.la. (Closes: #279082) - * debian/patches/13_new_configure.dpatch: - + Updated. - * debian/patches/22_dll.conf_debian.dpatch: - + Updated; the niash backend is now part of SANE. - * debian/patches/25_saned_man_section.dpatch: - + Removed; merged upstream. - * debian/patches/26_scanimage_batch.dpatch: - + Removed; merged upstream. - * debian/patches/27_snapscan-usb_count_urb.dpatch: - + Removed; taken from CVS, included in this version. - * debian/sane-utils.README.Debian: - + Fix reference to /usr/share/doc/libsane/README.Debian.gz - (Closes: #278670) - - -- Julien BLACHE <jblache@debian.org> Tue, 9 Nov 2004 23:28:23 +0100 - -sane-backends (1.0.14-7) unstable; urgency=medium - - * Co-maintainer upload. - * debian/patches/27_snapscan-usb_count_urb.dpatch: - + Added, backported from CVS: Don't enforce even number of URB packages - on snapscan 1212u_2. (Closes: #250885) - * debian/patches/03_hotplug_usbids.dpatch: - + Added Epson Corp. Stylus CX6400 to libsane.usermap. (Closes: #293946) - - -- Aurelien Jarno <aurel32@debian.org> Mon, 9 Aug 2004 11:17:13 +0200 - -sane-backends (1.0.14-6) unstable; urgency=medium - - * Urgency=medium as this revision will fix the upgrade path from Woody. - * debian/control: - + Removed obsolete gcc-3.3 build-depends. (Closes: #262245) - + Upgraded the sane-utils recommendation to a dependency as an upgrade - path from Woody. (Closes: #263408) - * debian/rules: - + Create /etc/hotplug/blacklist.d/libsane to prevent hotplug - from loading the no-longer-needed hpusbscsi module. (Closes: #260734) - * debian/patches/03_hotplug_usbids.dpatch: - + Added; adds HP ScanJet 5300C to libsane.usermap. (Closes: #260736) - * debian/patches/26_scanimage_batch.dpatch: - + Added; adds possibility to interrupt a batch scan in scanimage by - pressing ^D. (Closes: #260230) - - -- Julien BLACHE <jblache@debian.org> Wed, 4 Aug 2004 22:12:40 +0200 - -sane-backends (1.0.14-5) unstable; urgency=low - - * debian/patches/02_epson_usbids.dpatch - + Put back the USB IDs for the Perfection 1650, remove the USB IDs for the - Perfection 1250, which now really fixes the bug. - - -- Julien BLACHE <jblache@debian.org> Sun, 13 Jun 2004 13:48:27 +0200 - -sane-backends (1.0.14-4) unstable; urgency=low - - * debian/libsane.postinst - + modutils is Required, not Essential; replace kernelversion (provided by - modutils) by uname -r | cut. (Closes: #254140) - - -- Julien BLACHE <jblache@debian.org> Sun, 13 Jun 2004 12:12:02 +0200 - -sane-backends (1.0.14-3) unstable; urgency=low - - * debian/libsane.postinst - + Do not create /dev/usb/scanner* if running a 2.6 kernel. - * debian/patches/02_espon_usbids.dpatch - + Remove USB IDs for Perfection 1250 and 1260; these scanners are handled - by the plustek backend (pulled from CVS). (Closes: #248859) - * debian/patches/25_saned_man_section.dpatch - + Added; saned goes to /usr/sbin, its manpage should go to section 8. - - -- Julien BLACHE <jblache@debian.org> Fri, 11 Jun 2004 21:37:18 +0200 - -sane-backends (1.0.14-2) unstable; urgency=low - - * debian/patches/22_dll.conf_debian.dpatch - + Enable the hpoj backend by default. (Closes: #246985, #248379) - * debian/patches/01_libusbscanner.dpatch - + Pulled from CVS, fixes hotplug's lack of backward compatibility - (Closes: #248770) - - -- Julien BLACHE <jblache@debian.org> Thu, 20 May 2004 20:25:18 +0200 - -sane-backends (1.0.14-1) unstable; urgency=low - - * New upstream release. - + USB IDs for EPSON Stylus CX5400 added. (Closes: #243295) - + USB IDs for Nikon CoolScan 5000 added. (Closes: #243792) - * debian/hotplug/* - + removed, integrated upstream (tools/hotplug). - * debian/patches/01_mustek_pp_unified.dpatch - + removed, integrated in this release. - * debian/patches/02_hp_backend_usb_fix.dpatch - + removed, integrated in this release. - * debian/rules - + install the provided hotplug script and config file. - - -- Julien BLACHE <jblache@debian.org> Sat, 1 May 2004 16:26:47 +0200 - -sane-backends (1.0.13-4) unstable; urgency=low - - * debian/patches/02_hp_backend_usb_fix.dpatch - + added, pulled from CVS, fixes USB problems on kernel 2.6. (Closes: #242188) - * Updated libsane.usermap from CVS. (Closes: #242090) - * Updated README.Debian, fixed a couple of typos. - - -- Julien BLACHE <jblache@debian.org> Sun, 11 Apr 2004 10:31:41 +0200 - -sane-backends (1.0.13-3) unstable; urgency=low - - * debian/libsane.config, debian/libsane.templates, debian/po: - + Removed, we don't use debconf anymore. - * debian/postinst: - + Fixed the /dev/usb/parport0 typo that should have read /dev/parport0. - Thanks to Tore Anderson for catching this one. - + Removed anything debconf-related, only purge whatever is left in the - debconf DB. (Closes: #224597) - - -- Julien BLACHE <jblache@debian.org> Sat, 20 Dec 2003 18:44:37 +0100 - -sane-backends (1.0.13-2) unstable; urgency=low - - * debian/patches: order of the patches changed (slightly). - + 01_mustek_pp_unified.dpatch: scan area fixes. - - -- Julien BLACHE <jblache@debian.org> Mon, 1 Dec 2003 19:19:19 +0100 - -sane-backends (1.0.13-1) unstable; urgency=low - - * New upstream release. - * debian/patches: - + 20_net.c_fixes.dpatch : removed, merged upstream. - + 21_gt68xx_uhci_fixes.dpatch : ditto. - + 04_hp5400_sanei_config2.dpatch : ditto. - + 03_new_configure : updated. - + 04_mustek_pp_unified: added; with this patch the mustek_pp backend - supports both CIS and CCD scanners. (Closes: #190998) - * debconf: - + Direct users to README.Debian.gz instead of README.Debian - . (Closes: #217347) - + Added Japanese translation. (Closes: #214040) - + Added Dutch translation. (Closes: #218905) - + Added German translation, thanks to Dirk Ritter and debian-l10n-german. - * debian/sane-utils.README.Debian: - + More details about the saned user and group, and the reason why the saned - user is not part of the scanner group by default. (Closes: #220024) - * debian/devfs/scanner: - + Added an example for SCSI devices, thanks to Dirk Ritter. - * debian/control: - + Standards-Version bumped to 3.6.1 (no changes). - * debian/rules, debian/compat: - + Switch to DH_COMPAT 4, and moved from dh_movefiles to dh_install. - * debian/control, debian/rules: - + Build-depend on chrpath and use it to remove rpath from the binaries. - - -- Julien BLACHE <jblache@debian.org> Mon, 24 Nov 2003 18:35:21 +0100 - -sane-backends (1.0.12-7) unstable; urgency=low - - * The "Maintainer's birthday" release. - * Simplified the needlessly complex debconf questions. Now use a multiselect - question instead of 3 independent questions: - + debian/libsane.templates: rewritten to use a multiselect type - + debian/libsane.config: ditto, try to convert from the older questions, - then purge them once done. - + debian/libsane.postinst: rewritten to parse the answer from the new - debconf thingy. - + debian/control: now Depends: debconf (>= 0.5.0) due to the use of db_fset - in debian/libsane.config. - * debian/libsane.postinst: use ':' as a separator for chown instead of '.'. - * debian/libsane.README.Debian: ditto. - * debian/control: only Suggests: hotplug. (Closes: #205291) - - -- Julien BLACHE <jblache@debian.org> Wed, 20 Aug 2003 14:03:14 +0200 - -sane-backends (1.0.12-6) unstable; urgency=low - - [ Julien BLACHE ] - * debian/control - + Bumped Standards-Version to 3.6.0 (no changes). - + libsane depends on adduser (>= 3.47). - + libsane recommends hotplug. - * debian/libsane.templates: templates slightly rewritten to accomodate the - various debconf frontends. (Closes: #202744) - * debconf-related items: - + Switched debconf templates to debconf-po, thus build-depends on - debhelper (>= 4.1.16). (Closes: #203669) - + Added french debconf translation based on translation from Michel - Grentzinger <mic.grentz(AT)online.fr> for sane-backends 1.0.12-5. - (Closes: #203670) - * debian/libsane.postinst: - + Add a scanner system group, and chown root.scanner /dev/usb/scanner* if - we create them. (Closes: #201851) - * debian/libsane.README.Debian: - + Added a Setup paragraph, detailing permissions issues and solutions - implemented by this package. - * debian/sane-utils.README.Debian: - + Added, deals with permissions issues wrt the saned daemon. - * hotplug support: - + debian/hotplug/libusbscanner: added, hotplug script for scanners used - with libusb, courtesy of Max Kutny <mkut(AT)umc.com.ua>. Installed as - /etc/hotplug/usb/libusbscanner. - + debian/hotplug/libsane.usermap: example map file for use with hotplug. - Installed as /etc/hotplug/usb/libsane.usermap. - - [ Aurélien JARNO ] - * debian/devfs/scanner: - + Added, installed as /etc/devfs/conf.d/scanner. - - -- Julien BLACHE <jblache@debian.org> Wed, 6 Aug 2003 13:08:11 +0200 - -sane-backends (1.0.12-5) unstable; urgency=low - - * 21_gt68xx_uhci_fixes.dpatch : fix timeout with UHCI host controllers. - * debian/control: - - Added temporary Build-Dependency on gcc-3.3 (>= 3.3.1-0pre0), which should - fix the ICE on m68k. - * debian/rules: - - Should build with -O2 on m68k again. - - -- Julien BLACHE <jblache@debian.org> Wed, 2 Jul 2003 12:04:59 +0200 - -sane-backends (1.0.12-4) unstable; urgency=low - - [ Julien BLACHE ] - * The "I fucking hate libtool" release. Prevent libtool from checking things - we do not need at all, such as a C++ or an F77 compiler. Sigh. - * Converted to dpatch. Build-depends on dpatch. - * Re-enable the gphoto2 backend, -but- do so that frontends do not get linked - against libgphoto2. Only the backend is linked against it. (Closes: #195613) - * Thus, adds back the libgphoto2-2-dev build-dependency. - * Effectively move the html doc to the html subdir, instead of copying them - with dh_install. - - [ Aurélien JARNO ] - * Add autotools-stamp, so that configure won't be run twice. - * Do not link sanei_config2 in hp5400 : not needed (fixes an undefined - symbol, too). - - -- Julien BLACHE <jblache@debian.org> Tue, 3 Jun 2003 22:34:48 +0200 - -sane-backends (1.0.12-3) unstable; urgency=low - - * Fix the net backend so that it _does_ try all alternatives before giving - up connecting to the server. (Closes: #195396) - - -- Julien BLACHE <jblache@debian.org> Fri, 30 May 2003 19:22:54 +0200 - -sane-backends (1.0.12-2) unstable; urgency=low - - * Build with -O1 on m68k; -O2 triggers an ICE. - - -- Julien BLACHE <jblache@debian.org> Thu, 29 May 2003 11:36:41 +0200 - -sane-backends (1.0.12-1) unstable; urgency=low - - * New upstream release. - + Should now work on m68k. Yeah. (Closes: #77356) - + sane(7) has been improved. (Closes: #188647) - + scanimage(1) has been fixed, wrt --batch. - + The hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1). - + IPv6 support. - * Standards-Version bumped to 3.5.10 (no changes). - * libsane-dev belongs to libdevel. - * Do not generate manpages and documentation we do not need. - - -- Julien BLACHE <jblache@debian.org> Sun, 25 May 2003 21:14:37 +0200 - -sane-backends (1.0.11-4) unstable; urgency=medium - - * Move saned.conf to the sane-utils package. Woops. (Closes: #192742) - - -- Julien BLACHE <jblache@debian.org> Sat, 10 May 2003 08:41:23 +0200 - -sane-backends (1.0.11-3) unstable; urgency=medium - - * The "We want to enter testing" release. - * Do not build the gphoto2 backend. Gphoto2 is blocked by a bunch of other - packages (KDE, ...) and we're free of RC bugs. Enough. - * Moved libphoto2-2-dev to Build-Conflicts. - * Bumped shlibs. - - -- Julien BLACHE <jblache@debian.org> Sat, 3 May 2003 21:09:58 +0200 - -sane-backends (1.0.11-2) unstable; urgency=low - - * Do not tell how to configure libusb. (Closes: #180570) - * Do not print "Adding saned..." in sane-utils postinst - when the user already exists. - * Pulled fixed gphoto2 backend from CVS. (Closes: #180514) - - -- Julien BLACHE <jblache@debian.org> Thu, 13 Feb 2003 13:22:21 +0100 - -sane-backends (1.0.11-1) unstable; urgency=low - - * New upstream release. - + security fixes to saned. (Closes: #180203) - * Added some debconf dialogs: - + /dev/parport* - + /dev/sg* - + note about /proc/bus/usb - - -- Julien BLACHE <jblache@debian.org> Sun, 9 Feb 2003 21:17:16 +0100 - -sane-backends (1.0.10-2) unstable; urgency=low - - * Fix postrm breakage. (Closes: #179586) - - -- Julien BLACHE <jblache@debian.org> Mon, 3 Feb 2003 12:39:14 +0100 - -sane-backends (1.0.10-1) unstable; urgency=low - - * New upstream release. - + fixed sane-scsi manpage. (Closes: #174136) - + mustek_pp now has CIS support. (Closes: #152321) - * Added http://www.mostang.com/sane/sane-mfgs.html - as /usr/share/doc/libsane/supported.html. (Closes: #174131) - * New backends, previously included in libsane-extras : - + gt68xx - + artec_eplus48u (known as tevion9693usb) - * datadir is ${prefix}/share, not ${prefix}/share/sane. - * Remove /usr/lib/sane/libsane.so.1, as it's not libsane.so.1 - (looks like a libtool side-effect). - * Remove a couple more unwanted READMEs. - * Bumped Standards-Version to 3.5.8. - * Added a debconf dialog to create /dev/usb/*. (Closes: #177979) - * Added missing dependency on adduser to sane-utils. - - -- Julien BLACHE <jblache@debian.org> Sun, 2 Feb 2003 11:22:24 +0100 - -sane-backends (1.0.9-4) unstable; urgency=low - - * Pulled dll.c from CVS, fixes in-line comments. (Closes: #171521) - * Applied patch for Plustek backend rounding bug. (Closes: #172012) - - -- Julien BLACHE <jblache@debian.org> Mon, 9 Dec 2002 11:51:26 +0100 - -sane-backends (1.0.9-3) unstable; urgency=low - - * Rebuilt against new libgphoto2 package. - * Changed Uploaders: filed so that Aurélien's uploads won't be tagged as - NMU again. - * Do not generate debian/libsane.conffiles at build time, this is handled - by dh_installdeb automatically ; otherwise we end up with each conffile - being listed twice... - - -- Julien BLACHE <jblache@debian.org> Sun, 1 Dec 2002 11:29:43 +0100 - -sane-backends (1.0.9-2) unstable; urgency=low - - * Co-maintainer upload. - * Remove /etc/sane.d directory on purge. (Closes: #167603) - - -- Aurelien Jarno <aurel32@debian.org> Mon, 4 Nov 2002 14:10:54 +0100 - -sane-backends (1.0.9-1) unstable; urgency=low - - * New upstream release. - + Video for Linux (v4l) backend cleanup. (Closes: #159634) - + Updated Avision backend. (Closes: #146054) - + Updated Epson backend. (Closes: #114017) - + Fixed char signedness in backend/plustek-usbshading.c. (Closes: #164464) - * Fixed debian/copyright. (Closes: #146057) - * Enabled translations. - * Do not install the upstream changelog twice. - * sane-utils does not create /home/saned. - * Fixed packages descriptions. (Closes: #165138) - - -- Julien BLACHE <jblache@debian.org> Thu, 24 Oct 2002 18:52:29 +0200 - -sane-backends (1.0.8-4) unstable; urgency=low - - * libsane-extras has its own source package now. - - -- Julien BLACHE <jblache@debian.org> Sun, 13 Oct 2002 10:49:54 +0200 - -sane-backends (1.0.8-3) unstable; urgency=low - - * New maintainers. - * New upstream release. (Closes: #162532, #149317) - + saned manpage mentions /usr/sbin/saned. (Closes: #141464) - + Symlinks for manpages are properly created. (Closes: #99551) - + Fixed hostnames handling in saned.conf. (Closes: #51171) - + HP backend update. (Closes: #116962) - + Backend loader respects LD_LIBRARY_PATH. (Closes: #143771) - + Path for Epson USB scanner corrected in conf file. (Closes: #154296, #154305) - + A test backend is included, safer than the pnm backend. (Closes: #139256) - + Umax backend fixed. (Closes: #158676) - + HP backend fixed, no longer segfaults. (Closes: 154827) - * Repackaged from scratch, using debhelper. - * Standards-Version bumped to 3.5.6. - * Do not include rpath informations in sane-config. (Closes: #143603) - * Fixed build problem wrt umask. (Closes: #95440) - * Updated libsane-dev Depends. (Closes: #142679) - * Fixed typos in umax_pp.conf. (Closes: #158742) - * Fixed hp.conf for some scanners. (Closes: #154828) - * Fixed README.Debian. (Closes: #146039) - * Fixed sane-plustek(5) manpage. (Closes: #159435) - * New package sane-utils, contains sane-find-scanner, scanimage and saned. - + sane-utils creates user and group saned. (Closes: #141465) - * New package libsane-extras, containing some extra backends - + hp4200 (v0.2p1) - + gt68xx (v1.0-23) - + niash (v20020217) (Closes: #160327) - + tevion9693 (v0.0.9) - * Disabled translations until 1.0.9. - - -- Julien BLACHE <jblache@debian.org> Sat, 12 Oct 2002 10:28:09 +0200 - -sane-backends (1.0.8-2) unstable; urgency=low - - * Added build-depends on gettext. (Closes: #163681) - - -- Kevin Dalley <kevind@rahul.net> Mon, 7 Oct 2002 09:32:21 -0700 - -sane-backends (1.0.8-1) unstable; urgency=low - - * New upstream release. - + Many new backends - + Many more updated backends - - -- Kevin Dalley <kevind@rahul.net> Sun, 6 Oct 2002 18:09:28 -0700 - -sane-backends (1.0.7-3.2) unstable; urgency=high - - * Non-Maintainer Upload. - * Fix build on SPARC. - * Fix build on HPPA, although it's not RC. (Closes: #138108) - - -- Julien BLACHE <jblache@debian.org> Sun, 7 Apr 2002 11:39:41 +0200 - -sane-backends (1.0.7-3.1) unstable; urgency=medium - - * Non-Maintainer upload. - * Fixes compilation on Alpha, using the frontend/scanimage.c file from - the current CVS. (Closes: #138108) - * Apply patch submitted for #139509, regarding config.{sub,guess} issues - on MIPS. (Closes: #139509) - * Fix lintian complaint wrt misplaced Conflicts: field in control file. - * Fix lintian complaint about .comment section in /usr/lib/sane/*.so.*. - - -- Julien BLACHE <jblache@debian.org> Sun, 31 Mar 2002 20:24:48 +0200 - -sane-backends (1.0.7-3) unstable; urgency=low - - * Link against libusb-0.1-4. (Closes: #119393) - - -- Kevin Dalley <kevind@rahul.net> Fri, 15 Mar 2002 18:31:08 +0000 - -sane-backends (1.0.7-2) unstable; urgency=low - - * Don't link against libusb due to inconsistencies with versions of libusb - libraries. When libusb installation is cleaned up, then usb support - will be added again. Unfortunately, this re-opens #119393, though - with a lower severity. (Closes: #138349) - - -- Kevin Dalley <kevind@rahul.net> Thu, 14 Mar 2002 22:25:53 +0000 - -sane-backends (1.0.7-1) unstable; urgency=low - - * New upstream release. - * Add libusb, which includes ScanMaker 3600 drivers. (Closes: #119393) - * Install plustek-share.h so that plustek driver can be built. - (Closes: #72341) - - -- Kevin Dalley <kevind@rahul.net> Thu, 14 Mar 2002 01:02:21 +0000 - -sane-backends (1.0.6-1) unstable; urgency=low - - * New upstream release. - + New backend: gphoto2. - - -- Kevin Dalley <kevind@rahul.net> Sun, 27 Jan 2002 23:30:19 -0800 - -sane-backends (1.0.5-3) unstable; urgency=low - - * Rebuilt with new version of libgimp-1.2.2-2. - - -- Kevin Dalley <kevind@rahul.net> Tue, 2 Oct 2001 22:31:15 -0700 - -sane-backends (1.0.5-2) unstable; urgency=low - - * Removed incorrect build dependency on libc6-dev. (Closes: #108639) - - -- Kevin Dalley <kevind@rahul.net> Thu, 16 Aug 2001 08:12:40 -0700 - -sane-backends (1.0.5-1) unstable; urgency=low - - * New backends: bh (Bell+Howell Copiscan II series), dc240 (Kodak DC240 - Digital Camera), sm3600 (Microtek ScanMaker 3600), umax_pp (Umax paralell - port scanners). - * Fix security bug in saned.c that allowed access to scanner without - password. - - -- Kevin Dalley <kevind@rahul.net> Sat, 28 Jul 2001 12:38:46 -0700 - -sane-backends (1.0.4-2) unstable; urgency=low - - * Increase timeout in sanei_scsi.c, which removes problem with 2.4 - kernels. (Closes: #84407) - - -- Kevin Dalley <kevind@rahul.net> Thu, 31 May 2001 04:36:29 -0700 - -sane-backends (1.0.4-1) unstable; urgency=low - - * New upstream release. - * Add backend as63driver. (Closes: #69625) - - -- Kevin Dalley <kevin@seti.org> Sun, 28 Jan 2001 09:17:24 -0800 - -sane-gimp1.1 (1.0.3-4) unstable; urgency=low - - * Link sane-gimp1.1 against libgimp1.1-1.1.29. - * Change control files so that packages sane and sane-gimp1.1 are - explicitly described as working with gimp and gimp1.1 respectively. - The package sane now mentions the packages sane-gimp1.1 and vice - versa. - - -- Kevin Dalley <kevind@rahul.net> Sun, 5 Nov 2000 13:56:49 -0800 - -sane (1.0.3-3) unstable; urgency=low - - * Link sane-gimp1.1 against libgimp1.1-1.1.28, which is new library. - (Closes: #75029) - * Define GIMP_ENABLE_COMPAT_CRUFT to allow use of newer libgimp. - - -- Kevin Dalley <kevind@rahul.net> Sun, 22 Oct 2000 21:52:29 -0700 - -sane (1.0.3-2) unstable; urgency=low - - * Fix dependency in libsane-dev. (Closes: #71578) - * Remove extraneous file which contains space in its name, which causes - patch and dpkg-source to fail. (Closes: #71566, #71564, #71540) - - -- Kevin Dalley <kevind@rahul.net> Fri, 22 Sep 2000 23:04:17 -0700 - -sane (1.0.3-1) unstable; urgency=low - - * New upstream release. - + New backends: - - mustek_pp - - plustek - - st400 - - v41 - + Many updated backends. - + 16 bit support for scanimage. - - -- Kevin Dalley <kevind@rahul.net> Sat, 2 Sep 2000 11:32:08 -0700 - -sane (1.0.2-1) unstable; urgency=low - - * New upstream release. - * Aliased and hidden backend support. - * Added Ricoh IS50 support. - * updated many backends. - * New Linux SCSI Generic driver. - * sane-gimp1.1 linked with libsane-1,1.22. (Closes: #66544) - - -- Kevin Dalley <kevind@rahul.net> Mon, 3 Jul 2000 23:38:42 -0700 - -sane (1.0.1-1999-10-21-12) unstable; urgency=low - - * Add libjpeg62-dev, tetex-bin, tetex-extra to Build-Depends. - (Closes: #61834, 61835) - - -- Kevin Dalley <kevind@rahul.net> Wed, 5 Apr 2000 10:37:38 -0700 - -sane-gimp1.1 (1.0.1-1999-10-21-11) unstable; urgency=low - - * Add Build-Depends to control files for sane and sane-gimp1.1. - (Closes: #60923) - - -- Kevin Dalley <kevind@rahul.net> Mon, 27 Mar 2000 03:16:55 -0800 - -sane (1.0.1-1999-10-21-10) unstable; urgency=low - - * Improve description in control file. (Closes: #57032) - * Link sane-gimp1.1 with libgimp1.1.17, which is the most recent - libgimp1.1 in frozen unstable. - - -- Kevin Dalley <kevind@rahul.net> Mon, 28 Feb 2000 02:37:20 +0000 - -sane (1.0.1-1999-10-21-9) unstable; urgency=low - - * Link sane-gimp1.1 with libgimp1.1.15, which is the most recent - libgimp1.1 in frozen unstable. - - -- Kevin Dalley <kevind@rahul.net> Sat, 22 Jan 2000 01:57:55 -0800 - -sane (1.0.1-1999-10-21-8) unstable; urgency=low - - * sane now conflicts with gimp1.1, which increases the chances of - getting the correct versions of gimp with each version of sane. - Unfortunately, sane-gimp1.1 cannot conflict with gimp, since - gimp1.1 provides gimp. (Closes: #55070) - - -- Kevin Dalley <kevind@rahul.net> Sun, 16 Jan 2000 11:41:52 -0800 - -sane (1.0.1-1999-10-21-7) unstable; urgency=low - - * Link against libgimp1.1.14. (Closes: #53982) - * Remove conflict of libsane-gimp1.1 with itself. (Closes: #49709) - * Each version of sane and sane-gimp1.1 now depend upon the same release - of libsane. (Closes: #50927) - * shlibs dependencies are updated to ">= 1.0.1-1999-10-21-7" to reduce - chances of problem #50927. - - -- Kevin Dalley <kevind@rahul.net> Sun, 9 Jan 2000 13:22:57 -0800 - -sane (1.0.1-1999-10-21-6) unstable; urgency=low - - * Add conflict between libsane and older version of sane, sane-gimp1.1 - due to moving documentation from sane to libsane. (Closes: #50735) - - -- Kevin Dalley <kevind@rahul.net> Sat, 20 Nov 1999 15:15:30 -0400 - -sane (1.0.1-1999-10-21-5) unstable; urgency=low - - * Add symbolic link to /usr/lib/libsane-dll.so, again. - - -- Kevin Dalley <kevind@rahul.net> Fri, 19 Nov 1999 00:03:40 -0400 - -sane (1.0.1-1999-10-21-4) unstable; urgency=low - - * Fix problematic stripping of "libsane.la". (Closes: #50099) - * Move much of documentation from the sane package to the libsane - and libsane-dev packages. - * Move find-scanner to libsane package. - - -- Kevin Dalley <kevind@rahul.net> Wed, 17 Nov 1999 23:08:44 -0400 - -sane (1.0.1-1999-10-21-3) unstable; urgency=low - - * Add symbolic link for /usr/lib/libsane-dll.so. - - -- Kevin Dalley <kevind@rahul.net> Mon, 25 Oct 1999 01:24:30 -0700 - -sane (1.0.1-1999-10-21-2) unstable; urgency=low - - * Fix symbolic link for libsane.so.1. - - -- Kevin Dalley <kevind@rahul.net> Sun, 24 Oct 1999 14:43:14 -0700 - -sane (1.0.1-1999-10-21-1) unstable; urgency=low - - * New CVS snapshot. - + Fixes many bugs in various backends. - - -- Kevin Dalley <kevind@rahul.net> Fri, 22 Oct 1999 22:06:52 -0700 - -sane (1.0.1-6) unstable; urgency=low - - * Relink sane-gimp1.1 with libgimp1.1.10 - - -- Kevin Dalley <kevind@rahul.net> Thu, 14 Oct 1999 23:33:18 -0700 - -sane (1.0.1-5) unstable; urgency=low - - * Relink sane-gimp1.1 with libgimp1.1.9 - * Separate sane-gimp1.1 from sane. - - -- Kevin Dalley <kevind@rahul.net> Sun, 10 Oct 1999 03:42:37 -0700 - -sane (1.0.1-4) unstable; urgency=low - - * Added sane-gimp1.1 (used with gimp1.1) at the same time as sane for - gimp-1.0.x. - - -- Kevin Dalley <kevind@rahul.net> Wed, 30 Jun 1999 00:54:57 -0700 - -sane (1.0.1-3) unstable; urgency=low - - * Try to fix problems with shared libraries. Install libsane-dll.so in - /usr/lib so that programs linked with libsane will run. - (Closes: #37756) - - -- Kevin Dalley <kevind@rahul.net> Mon, 31 May 1999 22:15:16 -0700 - -sane (1.0.1-2) unstable; urgency=low - - * Remove dependencies for libsane. - - -- Kevin Dalley <kevind@rahul.net> Fri, 30 Apr 1999 23:08:50 -0700 - -sane (1.0.1-1) unstable; urgency=low - - * New upstream release. - * New backend for Sharp scanners - * Update backends for Kodak DC25, HP, Microtek, Micro, Mustek, Nikon - Coolscan, snapscan, UMAX. - * Fixes a problem with HP scanners. (Closes: #32516) - * Includes backend for dc210. (Closes: #31377) - - -- Kevin Dalley <kevind@rahul.net> Tue, 27 Apr 1999 01:24:33 -0700 - -sane (1.00-2) unstable; urgency=low - - * Removed examples directory. Moved examples/tools to tools directory. - - -- Kevin Dalley <kevind@rahul.net> Mon, 5 Apr 1999 02:04:53 -0700 - -sane (1.00-1) unstable; urgency=low - - * New upstream release. - * Artec backend is back in dll.conf. - * Many more scanner are supported now and more changes. - - -- Kevin Dalley <kevind@rahul.net> Sat, 5 Dec 1998 01:00:30 -0800 - -sane (0.74-2) unstable; urgency=low - - * Temporarily comment out Artec backend in dll.conf, due to bad - interaction with Umax scanner. When using an Artec scanner, - uncomment "artec" in dll.conf. - * Automatically generates conffiles. (Closes: #26545) - Thanks to Roman Hodek <roman.hodek@informatik.uni-erlangen.de>. - * Fix a problem with creation of /usr/share/sane during the - build process. (Closes: #26314) - - -- Kevin Dalley <kevind@rahul.net> Sun, 20 Sep 1998 18:00:28 -0700 - -sane (0.74-1) unstable; urgency=low - - * New upstream release. - - -- Kevin Dalley <kevind@rahul.net> Sat, 22 Aug 1998 23:06:26 -0700 - -sane (0.72-1) unstable; urgency=low - - * New upstream release. - * First official release to support libgtk1-0.99.9. - - -- Kevin Dalley <kevind@rahul.net> Fri, 10 Apr 1998 02:29:52 -0700 - -sane (0.71-2) unstable; urgency=low - - * Fixed spelling in control files. (Closes: # 19003) - * Modified to match latest change in libgtk-0.99.5 - * Change datadir to /usr/share/sane - * Compatible with libgtk1-0.99.8. (Closes: #19595) - - -- Kevin Dalley <kevind@rahul.net> Sun, 22 Mar 1998 19:44:10 -0800 - -sane (0.71-1) unstable; urgency=low - - * New upstream release. - + New backends: - - Polaroid Digital Microscope Cameras (DMC) - - Apple scanners - - Nikon CoolScan - * Remove execute permission in doc directory. (Closes: #17949) - * Modify manual page referring to symbolic link of xscanimage. - (Closes: #18071) - - -- Kevin Dalley <kevind@rahul.net> Fri, 27 Feb 1998 23:03:08 -0800 - -sane (0.70-1) unstable; urgency=low - - * New upstream release: - + New and updated backends: - - AGFA SnapScan - - UMAX scanners - * Add patches 2-5 to SnapScan backend which allows other scanners - to work as well with the backend - - -- Kevin Dalley <kevind@rahul.net> Sat, 31 Jan 1998 17:32:53 -0800 - -sane (0.69-2) unstable; urgency=low - - * Modify umax-scanner.h so that Astra 1200S is legal. - - -- Kevin Dalley <kevind@rahul.net> Sun, 25 Jan 1998 09:44:45 -0800 - -sane (0.69-1) unstable; urgency=low - - * New upstream release. - - -- Kevin Dalley <kevind@rahul.net> Fri, 23 Jan 1998 20:24:01 -0800 - -sane (0.68-4) unstable; urgency=low - - * Modify gtkglue.c to correspond with changes to libgtk1. - - -- Kevin Dalley <kevind@rahul.net> Tue, 6 Jan 1998 22:24:14 -0800 - -sane (0.68-3) unstable; urgency=low - - * Change plug-in directory to 0.99 to match gimp changes, - add explicit gimp dependency. - * Add README.debian. - * Install find-scanner. - * Install many documentation files. - - -- Kevin Dalley <kevind@rahul.net> Fri, 2 Jan 1998 21:51:52 -0800 - -sane (0.68-2) unstable; urgency=low - - * Fix control file. - - -- Kevin Dalley <kevind@rahul.net> Sun, 21 Dec 1997 18:26:23 -0800 - -sane (0.68-1) unstable; urgency=low - - * New upstream release. - - -- Kevin Dalley <kevind@rahul.net> Fri, 5 Dec 1997 00:42:27 -0800 - -sane (0.67-1) unstable; urgency=low - - * Initial release. - - -- Kevin Dalley <kevind@rahul.net> Tue, 18 Nov 1997 21:38:41 -0800 |