summaryrefslogtreecommitdiff
path: root/doc/plustek
diff options
context:
space:
mode:
Diffstat (limited to 'doc/plustek')
-rw-r--r--doc/plustek/FAQ5
-rw-r--r--doc/plustek/Makefile.kernel243
-rw-r--r--doc/plustek/Plustek-PARPORT-TODO.txt2
-rw-r--r--doc/plustek/Plustek-PARPORT.changes6
-rw-r--r--doc/plustek/Plustek-PARPORT.txt5
-rw-r--r--doc/plustek/Plustek-USB-TODO.txt1
-rw-r--r--doc/plustek/Plustek-USB.changes4
-rw-r--r--doc/plustek/Plustek-USB.txt29
8 files changed, 24 insertions, 31 deletions
diff --git a/doc/plustek/FAQ b/doc/plustek/FAQ
index 7d65f41..a3a224f 100644
--- a/doc/plustek/FAQ
+++ b/doc/plustek/FAQ
@@ -51,7 +51,7 @@ SOLUTION:
---------
Set the link /usr/src/linux
to your current kernel-source tree before recompiling
-kernel-modules like pt_drv, then your version mismatch
+kernel-modules like pt_drv, then your version mismatch
problem should be solved.
@@ -303,7 +303,7 @@ A: Normally, there is no need to do so, because once you
have to worry about loading the driver. It happens automagically. ;-)
The driver will be loaded when needed (and eventually
removed after a specific time of not using it).
-
+
Nevertheless, another possibility is to do a modprobe pt_drv in the
/etc/rc.d/boot.local (using SuSE) or
/etc/rc.d/rc.local (using RedHat or Mandrake) file
@@ -382,4 +382,3 @@ A: In general you can install it over. BUT this has caused
This should cover all the directories where maybe some
sane files are installed...
-
diff --git a/doc/plustek/Makefile.kernel24 b/doc/plustek/Makefile.kernel24
index 207ef39..28677c1 100644
--- a/doc/plustek/Makefile.kernel24
+++ b/doc/plustek/Makefile.kernel24
@@ -43,7 +43,7 @@ REFOPT = -xref-all -index-all -html32
#
# add the following to get assembly listing
-# -Wa,-alh,-L -g
+# -Wa,-alh,-L -g
#
# get some version numbers
@@ -248,4 +248,3 @@ depend .depend dep:
ifeq (.depend,$(wildcard .depend))
#include .depend
endif
-
diff --git a/doc/plustek/Plustek-PARPORT-TODO.txt b/doc/plustek/Plustek-PARPORT-TODO.txt
index 94ef5f7..6eb8667 100644
--- a/doc/plustek/Plustek-PARPORT-TODO.txt
+++ b/doc/plustek/Plustek-PARPORT-TODO.txt
@@ -28,7 +28,7 @@ Genius HR6 negative scanning not okay none
********************************* DONE ***************************************
-- PS/2 bidi does not work (libieee1284)
+- PS/2 bidi does not work (libieee1284)
- Update the IOCTL interface and remove some old structs (CmdBlk)
******************************** SKIPPED *************************************
diff --git a/doc/plustek/Plustek-PARPORT.changes b/doc/plustek/Plustek-PARPORT.changes
index 0e7d73b..6aa878b 100644
--- a/doc/plustek/Plustek-PARPORT.changes
+++ b/doc/plustek/Plustek-PARPORT.changes
@@ -149,11 +149,11 @@ Version 0.43-7 05/11/2005
1.0 Fixed timer issues in user-space (Thanx to Rod Roark)
Version 0.43-8 08/10/2005
- 1.0 Fixed problem on ASIC96003/1 based devices, when scanning
+ 1.0 Fixed problem on ASIC96003/1 based devices, when scanning
lineart at 200 and 300 dpi
Version 0.43-9 11/14/2005
- 1.0 Fixed sizeof(long) issue for 64bit platforms, see
+ 1.0 Fixed sizeof(long) issue for 64bit platforms, see
bug #302195
Version 0.43-10 02/16/2006
@@ -177,4 +177,4 @@ Version 0.43-13 06/18/2007
Version 0.44-1 02/13/2013
1.0 Fixed issues for Kernels > 2.6.35
2.0 Define ULong and friends to uint32_t to make the driver
- work in a 64 bit environment \ No newline at end of file
+ work in a 64 bit environment
diff --git a/doc/plustek/Plustek-PARPORT.txt b/doc/plustek/Plustek-PARPORT.txt
index e5b6097..a181b9c 100644
--- a/doc/plustek/Plustek-PARPORT.txt
+++ b/doc/plustek/Plustek-PARPORT.txt
@@ -22,7 +22,7 @@ in sane-backends/backend. Simply do (as root user)
Then the module should be compiled, installed and loaded.
-Add the following three lines to file /etc/modules.conf
+Add the following three lines to file /etc/modules.conf
alias char-major-40 pt_drv
pre-install pt_drv modprobe -k parport
@@ -44,6 +44,3 @@ protocol will be changed and newer drivers won't work with older backends
and vice versa.
In this case (error -9019 in the SANE debug output!!) you have to recompile SANE
AND the driver (have a look at the installation procedure above).
-
-
-
diff --git a/doc/plustek/Plustek-USB-TODO.txt b/doc/plustek/Plustek-USB-TODO.txt
index 0ea7e8b..7d03e9b 100644
--- a/doc/plustek/Plustek-USB-TODO.txt
+++ b/doc/plustek/Plustek-USB-TODO.txt
@@ -50,4 +50,3 @@ make mono/gray modes work on Canon scanners done
copy picture line by line to backend done
cancel function does not work correctly in large resolutions fixed
Move documents to its correct SANE place done
-
diff --git a/doc/plustek/Plustek-USB.changes b/doc/plustek/Plustek-USB.changes
index 8ed5cc8..ae6e69e 100644
--- a/doc/plustek/Plustek-USB.changes
+++ b/doc/plustek/Plustek-USB.changes
@@ -148,7 +148,7 @@ optical one (sensor stops too early)
V 0.50-2 (2005-08-19)
---------------------
More cleanup.
-Removed obsolete _WAF_BLACKFINE.
+Removed obsolete _WAF_BLACKFINE.
LiDE20 does not seem to have a reliable black calibration area,
so the devices now will switch off the lamp for dark calibration.
Fixed line statistics and added calibration data output.
@@ -283,7 +283,7 @@ V 0.47-1 - 0.47-4
V 0.46-9 (2003-11-03)
---------------------
-- Added alternate calibration for CIS devices
+- Added alternate calibration for CIS devices
- Added coarse calibration data-cache
- Moved parallelport code to extra backend file plustek_pp
- Fixed some minor bugs
diff --git a/doc/plustek/Plustek-USB.txt b/doc/plustek/Plustek-USB.txt
index e1ee793..939d4d7 100644
--- a/doc/plustek/Plustek-USB.txt
+++ b/doc/plustek/Plustek-USB.txt
@@ -20,7 +20,7 @@ PLUSTEK
=======
Vendor ID: 0x07B3
-Product ID Device-description and status
+Product ID Device-description and status
0x0005 not identified yet
0x0007 not identified yet
0x000F not identified yet
@@ -32,21 +32,21 @@ Product ID Device-description and status
0x0015 U24 (LM9832) - working
0x0016 not identified yet
0x0017 UT12 - working, UT16 - working, UT24 - working
-
+
MUSTEK
======
BearPaw vendor ID: 0x0400 (They use the NationalSemiconductors ID!!!)
-Product ID Device-description and status
+Product ID Device-description and status
0x1000 BearPaw 1200 (LM9831) - working
0x1001 BearPaw 1200 (LM9832) - not tested
0x1001 BearPaw 2400 (LM9832) - mostly working
-
+
KYE (Genius)
============
Vendor ID: 0x0458
-
-Product ID Device-description and status
+
+Product ID Device-description and status
0x2007 ColorPage-HR6 V2 - working
0x2008 ColorPage-HR6 V2 - not tested
0x2009 ColorPage-HR6A - not tested
@@ -58,7 +58,7 @@ Hewlett Packard
===============
Vendor ID: 0x03F0
-Product ID Device-description and status
+Product ID Device-description and status
0x0505 HP Scanjet 2100c - working
0x0605 HP Scanjet 2200c - working
@@ -66,7 +66,7 @@ EPSON
=====
Vendor ID: 0x04b8
-Product ID Device-description and status
+Product ID Device-description and status
0x010F EPSON Perfection 1250/Photo - working
0x011D EPSON Perfection 1260/Photo - working
@@ -74,9 +74,9 @@ UMAX
====
Vendor ID: 0x1606
-Product ID Device-description and status
-0x0050 UMAX 3400 - working
-0x0060 UMAX 3400/3450 - working
+Product ID Device-description and status
+0x0050 UMAX 3400 - working
+0x0060 UMAX 3400/3450 - working
0x0160 UMAX 5400 - working
COMPAQ
@@ -90,7 +90,7 @@ CANON
=====
Vendor ID: 0x04A9
-Product ID Device-description and status
+Product ID Device-description and status
0x???? FB620U - not integrated
0x2206 N650U - working
0x2207 N1220U - working
@@ -216,7 +216,7 @@ usbscanner 0x0003 0x1606 0x0160 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00
The example line shows the vendor ID of UMAX 0x1606 and the product ID of the 5400
0x0160 - these values must match the ones of your scanner.
-Last step is adding a script in
+Last step is adding a script in
/etc/hotplug/usb/
It is called "usbscanner" (don't forget the executable rights)
@@ -232,7 +232,7 @@ fi
This script will correct the access right to your scanner device when the device
is plugged in.
-
+
Debugging your USB scanner (written by Kev Green)
-------------------------------------------------
@@ -454,4 +454,3 @@ CM - Color Mode (unitless), 3 for channel pixel rate color, else 1
-------------------------
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 21:15:12 +0000