diff options
Diffstat (limited to 'doc/sane-coolscan3.man')
| -rw-r--r-- | doc/sane-coolscan3.man | 20 |
1 files changed, 11 insertions, 9 deletions
diff --git a/doc/sane-coolscan3.man b/doc/sane-coolscan3.man index 57c0652..7c59f43 100644 --- a/doc/sane-coolscan3.man +++ b/doc/sane-coolscan3.man @@ -83,7 +83,7 @@ If set to "yes", the scanner will read the infrared channel, thus allowing defect removal in software. The infrared image is read during a second scan, with no options altered. The backend must not be restarted between the scans. If you use scanimage, perform a batch scan with -.B batch\-count=2 +.B \-\-batch\-count=2 to obtain the IR information. .TP .B \-\-depth <n> @@ -113,14 +113,15 @@ Multiply all exposure times with this value. This allows exposure correction without modifying white balance. .TP .B \-\-load -Load the next slide when using the slide loader. +Load the next slide when using the slide loader (SF\-200 bulk loader only). .TP .B \-\-eject Eject the film strip or mounted slide when using the slide loader. .TP .B \-\-reset Reset scanner. The scanner will perform the same action as when power is -turned on: it will eject the film strip and calibrate itself. Use this +turned on: it will eject the film strip (with the SF\-200 bulk loader) +and calibrate itself. Use this whenever the scanner refuses to load a film strip properly, as a result of which .B \-\-eject @@ -142,7 +143,7 @@ These lines are ignored, thus '#' can be used to include comments. .TP .I containing only the word """auto""" This instructs the backend to probe for a scanner by scanning the buses for -devices with know identifiers. This is the action taken when no +devices with known identifiers. This is the default action when no configuration file is present. .TP .I a line of the form <interface>:<device> @@ -175,8 +176,8 @@ levels reduce verbosity. .BR sane\-scsi (5), .BR sane\-usb (5), .BR scanimage (1), -.BR xscanimage(1), -.BR xsane(1) +.BR xscanimage (1), +.BR xsane (1) .SH BUGS Currently, the SANE protocol does not allow automatically updating options @@ -184,9 +185,10 @@ whenever the hardware changes. Thus the number of choices for the .B \-\-frame option will be fixed when the backend is initialized (usually when the user runs the frontend). In particular, if there is no film strip in the -automatic film strip feeder when the backend is initialized, the frame option -will not appear at all. Also, restarting the frontend after swapping film -adapters is strongly recommended. +automatic film strip feeder when the backend is initialized, the +.B \-\-frame +option will not appear at all. +Also, restarting the frontend after swapping film adapters is strongly recommended. Linux kernels prior to 2.4.19 had a patch that truncated INQUIRY data from IEEE 1394 scanners to 36 bytes, discarding vital information |