diff options
Diffstat (limited to 'doc/sane-epjitsu.man')
| -rw-r--r-- | doc/sane-epjitsu.man | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/doc/sane-epjitsu.man b/doc/sane-epjitsu.man index 3552691..9a31da2 100644 --- a/doc/sane-epjitsu.man +++ b/doc/sane-epjitsu.man @@ -5,12 +5,12 @@ sane\-epjitsu \- SANE backend for Epson-based Fujitsu USB scanners. .SH DESCRIPTION -The +The .B sane\-epjitsu library implements a SANE (Scanner Access Now Easy) backend which provides basic access the Fujitsu fi\-60F/fi\-65F and ScanSnap S300/S1300(i)/S1100(i) scanners. .SH HARDWARE SUPPORT -These scanners are fairly limited, only supporting a couple of modes and resolutions, and always scanning full width. The backend supports missing modes (binary, grayscale) and intermediate resolutions in software, but provides only minimal scan area controls. See +These scanners are fairly limited, only supporting a couple of modes and resolutions, and always scanning full width. The backend supports missing modes (binary, grayscale) and intermediate resolutions in software, but provides only minimal scan area controls. See .B KNOWN ISSUES. This backend may support other scanners. If physical inspection reveals an Epson chipset, please contact the author for instructions on collecting a USB trace under Windows to verify. @@ -18,12 +18,12 @@ This backend may support other scanners. If physical inspection reveals an Epson .SH OPTIONS A limited effort has been made to expose the standard options to the API. This allows a frontend to set resolution, color mode, and choose the ADF setting. The epjitsu backend supports the following basic options for most scanners: .PP -source s +source s .RS Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex". .RE .PP -mode m +mode m .RS Selects the mode for the scan. Options may include "Lineart", "Gray", "Color". .RE @@ -52,13 +52,13 @@ Some systems use a kernel driver to access usb scanners. This method is untested .PP The only configuration option supported is "firmware /PATH/TO/FILE", allowing you to set the location of the firmware file you have extracted from the Windows driver. .PP -.B Note: +.B Note: This firmware is a copyrighted work of Fujitsu, so cannot be provided by the backend or the author. Please do not ask. .PP -.B Note: +.B Note: These scanners REQUIRE a firmware file to function. See the supplied configuration file for more detail. .PP -.B Note: +.B Note: This option may appear multiple times in the configuration file. It only applies to scanners discovered by 'usb' lines that follow this option. .PP @@ -103,4 +103,3 @@ sane\-usb(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - |