summaryrefslogtreecommitdiff
path: root/doc/sane-s9036.man
diff options
context:
space:
mode:
Diffstat (limited to 'doc/sane-s9036.man')
-rw-r--r--doc/sane-s9036.man71
1 files changed, 71 insertions, 0 deletions
diff --git a/doc/sane-s9036.man b/doc/sane-s9036.man
new file mode 100644
index 0000000..fe194b6
--- /dev/null
+++ b/doc/sane-s9036.man
@@ -0,0 +1,71 @@
+.TH sane\-s9036 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.IX sane\-s9036
+.SH NAME
+sane\-s9036 \- SANE backend for Siemens 9036 flatbed scanners
+.SH DESCRIPTION
+The
+.B sane\-s9036
+library implements a SANE (Scanner Access Now Easy) backend that
+provides access to Siemens 9036 flatbed scanners.
+
+.SH "DEVICE NAMES"
+This backend expects device names of the form:
+.PP
+.RS
+.I special
+.RE
+.PP
+Where
+.I special
+is the path-name for the special device that corresponds to a
+SCSI scanner. The special device name must be a generic SCSI device or a
+symlink to such a device. The program
+.IR sane\-find\-scanner
+helps to find out the correct device. Under Linux, such a device name
+could be
+.I /dev/sga
+or
+.IR /dev/sge ,
+for example. See sane\-scsi(5) for details.
+
+.SH FILES
+.TP
+.I @CONFIGDIR@/s9036.conf
+The backend configuration file (see also description of
+.B SANE_CONFIG_DIR
+below).
+.TP
+.I @LIBDIR@/libsane\-s9036.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-s9036.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+.SH ENVIRONMENT
+.TP
+.B SANE_CONFIG_DIR
+This environment variable specifies the list of directories that may
+contain the configuration file. Under UNIX, the directories are
+separated by a colon (`:'), under OS/2, they are separated by a
+semi-colon (`;'). If this variable is not set, the configuration file
+is searched in two default directories: first, the current working
+directory (".") and then in @CONFIGDIR@. If the value of the
+environment variable ends with the directory separator character, then
+the default directories are searched after the explicitly specified
+directories. For example, setting
+.B SANE_CONFIG_DIR
+to "/tmp/config:" would result in directories "tmp/config", ".", and
+"@CONFIGDIR@" being searched (in this order).
+.TP
+.B SANE_DEBUG_S9036
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend. Higher
+debug levels increase the verbosity of the output.
+
+Example:
+export SANE_DEBUG_S9036=4
+
+.SH "SEE ALSO"
+sane(7), sane\-scsi(5)
+.SH AUTHOR
+Ingo Schneider