diff options
Diffstat (limited to 'doc/sane-sm3600.man')
| -rw-r--r-- | doc/sane-sm3600.man | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/doc/sane-sm3600.man b/doc/sane-sm3600.man new file mode 100644 index 0000000..8f58622 --- /dev/null +++ b/doc/sane-sm3600.man @@ -0,0 +1,82 @@ +.TH sane\-sm3600 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-sm3600 +.SH NAME +sane\-sm3600 \- SANE backend for Microtek scanners with M011 USB chip +.SH DESCRIPTION +The +.B sane\-sm3600 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to some Microtek scanners with the Toshiba M011 custom +USB chip. This backend should be considered alpha. +.PP +There are also backends for Microtek scanners with SCSI command set. +Refer to sane\-microtek(5) and sane\-microtek2(5) for details. +.PP +At present, the following +scanners are known positively to work with this backend: +.PP +.RS +.ft CR +.nf +Vendor Product id: Remark: +-------- -------------- ----------- +Microtek ScanMaker 3600 all modes ok +Microtek ScanMaker 3700 reported to work +Microtek ScanMaker 3750 reported to work +.fi +.ft R +.RE +.PP +If you own a Microtek scanner with the M011 chip other than the ones +listed above, it may or may not work with SANE! + +.SH "FRONTEND OPTIONS" +This backend dynamically enables the options for the frontend, +that are supported by the scanner in dependence of the scanning-mode +and other options. Not supported options are disabled. +.PP +The following options are supported by the Microtek2-driver: +.PP +Color, grayscale, halftone and lineart scans. +.PP +contrast, brightness, control, gamma correction. + +.SH "DEVICE NAMES" +This backend does not support device names in a standardized form. + +.SH CONFIGURATION +This backend does not support a configuration file right now. + +.SH FILES +.TP +.I @LIBDIR@/libsane\-sm3600.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-sm3600.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_SM3600 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller +levels reduce verbosity. To see error messages on stderr set +SANE_DEBUG_SM3600 to 1. + +.br +E.g. just say: +.br +export SANE_DEBUG_SM3600=5 + +.SH "SEE ALSO" +sane\-microtek2(5), http://sm3600.sourceforge.net + +.SH AUTHOR +.br +Marian Eichholz (eichholz@computer.org) +.br +Glenn Ramsey (glenn@componic.com) +.br + |