diff options
Diffstat (limited to 'doc/sane-teco1.man')
| -rw-r--r-- | doc/sane-teco1.man | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/doc/sane-teco1.man b/doc/sane-teco1.man new file mode 100644 index 0000000..acb4985 --- /dev/null +++ b/doc/sane-teco1.man @@ -0,0 +1,197 @@ +.TH sane\-teco1 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-teco1 +.SH NAME +sane\-teco1 \- SANE backend for TECO / RELISYS scanners +.SH DESCRIPTION +The +.B sane\-teco1 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to some TECO SCSI flatbed scanners. This backend +should be considered +.B beta-quality +software! TECO scanners are sold under +various brands like RELISYS, PIOTECH, TRUST. This backend may or +may not support yours. +.PP +The scanners that should work with this backend are: +.PP +.RS +.ft CR +.nf + Vendor Model TECO model status +---------------------- -------------- ----------- + Relisys AVEC 2400 VM3520 tested + Relisys AVEC 2412 VM3520+ tested + Relisys AVEC 4800 VM4530 untested + Relisys AVEC 4816 VM4530+ untested + Relisys RELI 2400 VM3530 untested + Relisys RELI 2412 VM3530+ tested + Relisys RELI 2412 VM3530+ untested + Relisys RELI 4816 VM4540 tested + Relisys RELI 4830 VM4542 tested + Relisys RELI 9600 VM6530 untested + Relisys RELI 9612 VM6530* untested + Relisys RELI 9624 VM6530+ untested + Relisys RELI 9630 VM6540 untested + Relisys RELI DS15 VM3440 untested + Relisys RELI DS6 VM3420 untested + Dextra DF-600P VM3510 tested + Dextra DF-4830T VM4542 untested + Dextra DF-1200T+ VM3530+ untested + Dextra DF-9624 VM6530+ untested +.fi +.ft R +.RE + +Note that the untested scanner will not be directly supported. You +should contact the author for that. + +The TECO VM number can usually be found at the back of the scanner. It +is also part of the FCC ID. "sane\-find\-scanner \-v" will also show the +scsi inquiry, and if it is a TECO scanner, the name will be there too. + +The options the backend supports can either be selected through +command line options to programs like scanimage or through GUI +elements in xscanimage or xsane. + +.br +If you have any success with a scanner not listed here, or if you have +any strange behavior, please report to the backend maintainer or to +the SANE mailing list. + +Valid command line options and their syntax can be listed by using +.RS +scanimage \-\-help \-d teco1 +.RE + +.TP +.B Scan Mode + +.TP +.B \-\-mode +selects the basic mode of operation of the scanner valid choices are +.I Black & White +, +.I Grayscale +and +.I Color +The Black & White mode is black and white only (1 bit). Grayscale +will produce 256 levels of gray (8 bits). Color will produce a 24 bits +color image. + +.TP +.B \-\-resolution +selects the resolution for a scan. The scanner can do all resolutions +between 1 and 600, in increments of 1. + + +.TP +.B Geometry options + +.TP +.B \-l \-t \-x \-y +control the scan area: \-l sets the top left x coordinate, \-t the top +left y coordinate, \-x selects the width and \-y the height of the scan +area. All parameters are specified in millimeters by default. + + +.TP +.B Enhancement options + +.TP +.B \-\-custom\-gamma +(color mode only) allows the user to specify a gamma table (see the +next 3 parameters). + +.TP +.B \-\-red\-gamma\-table +(color mode only) can be used to download a user defined +gamma table for the red channel. The table must be 256 bytes long. + +.TP +.B \-\-green\-gamma\-table +(color mode only) can be used to download a user defined +gamma table for the green channel. The table must be 256 bytes long. + +.TP +.B \-\-blue\-gamma\-table +(color mode only) can be used to download a user defined gamma table +for the blue channel. The table must be 256 bytes long. + +.TP +.B \-\-dither +(Black & White only) select the dither mask to use. Possible values are +.I Line art +, +.I 2x2 +, +.I 3x3 +, +.I 4x4 bayer +, +.I 4x4 smooth +, +.I 8x8 bayer +, +.I 8x8 smooth +, +.I 8x8 horizontal +and +.I 8x8 vertical + + +.TP +.B \-\-preview +requests a preview scan. The resolution used for that scan is 22 dpi +and the scan area is the maximum allowed. The scan mode is user +selected. The default is "no". + + +.SH CONFIGURATION FILE +The configuration file @CONFIGDIR@/teco1.conf supports only one information: the device name to use (eg /dev/scanner). + + +.SH FILES +.TP +.I @LIBDIR@/libsane\-teco1.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-teco1.so +The shared library implementing this backend (present on systems that +support dynamic loading). + + +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_TECO1 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller levels +reduce verbosity. + + +.SH LIMITATIONS +The windows TWAIN driver has many more options than this SANE +backend. However they are only software adjustments. This backend only +implements what the scanner can support. + + +.SH BUGS + +None known. + + +.SH "SEE ALSO" + +sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7) + + +.SH AUTHOR +.TP +The package is actively maintained by Frank Zago. +.I http://www.zago.net/sane/#teco + +.SH CREDITS + +Thanks to Gerard Delafond for the VM4542 support. +Thanks to Jean-Yves Simon for the VM3510 support. |