diff options
Diffstat (limited to 'doc/umax/umax.CHANGES')
| -rw-r--r-- | doc/umax/umax.CHANGES | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/doc/umax/umax.CHANGES b/doc/umax/umax.CHANGES index 79cca89..fae53a4 100644 --- a/doc/umax/umax.CHANGES +++ b/doc/umax/umax.CHANGES @@ -5,9 +5,9 @@ umax -> sane-0.6: ----------------- * umax-sane-backend created: - - umax.c splitted in: + - umax.c split in: umax-cli.c, umax-scsi.c, umax-driver.c, umax-text.c - - umax.h splitted in: + - umax.h split in: umax-scanner.h, umax-scsi.h, umax-scsidef.h, umax-struct.h - outputs done by DBG(level,msg,args...) defined in debug.h - scsi-calls changed to sane-format (of sane-0.57) @@ -91,7 +91,7 @@ sane-0.6 / 0.61 / 0.62 -> 0.63 * reset adf and uta flag when not used (in sane_start) - * added possibilty to change calibration-mode if available + * added possibility to change calibration-mode if available * added send_halftone_pattern to umax-scsi.c @@ -119,7 +119,7 @@ sane-0.6 / 0.61 / 0.62 -> 0.63 and added missing 3 wid-bytes in scan.cmd * removed parameter color in three_pass_function_headers, - the color ist taken from us->three_pass_color now. + the color is taken from us->three_pass_color now. sane-0.63/0.64/0.65 -> 0.66 @@ -189,7 +189,7 @@ sane-0.66 -> 0.67 * removed bug (wrong length for 10 bit-gamma) in send_gamma_data - * changed all buffer-definitions to unsigned char and insterted + * changed all buffer-definitions to unsigned char and inserted type conversions, so there are no more warnings because of typemismatches. @@ -201,7 +201,7 @@ sane-0.67 -> 0.68 * changed open config to fp = sanei_config_open(UMAX_CONFIG_FILE) - * changed all set OPT...BIND commands, endless-loop happend in sane-0.67 + * changed all set OPT...BIND commands, endless-loop happened in sane-0.67 =>ane-0.67-umax-fix.diff.gz after that patch changed same for ten_bit_mode @@ -232,7 +232,7 @@ sane-0.68 -> 0.69 * changed name: umax_read_data_block -> umax_read_image_data - * changed length offest in do_inquiry from 5 to 4 + * changed length offset in do_inquiry from 5 to 4 and changed set_inquiry_length-offset from 5 to 4 * added calib_lines to structure US and added it to @@ -278,7 +278,7 @@ sane-0.69 -> 0.70 * moved reader_process from umax.c to umax-scsi.c and added routine for color ordering. - * reset length offest in do_inquiry from 4 to 5 + * reset length offset in do_inquiry from 4 to 5 and set_inquiry_length-offset from 4 to 5 because umax-S6E didn't work with it! @@ -395,7 +395,7 @@ sane-0.73 -> 0.74 There must'nt be a "wait_scanner" in calibration by driver routine!!! * added usage of driver internal values for calibration by driver if - the scanner does not give back the informations about the shading data: + the scanner does not give back the information about the shading data: width = dev->width * dev->inquiry_optical_res ( * 3 in RGB-mode ) * added 2 calibration-routines: @@ -497,7 +497,7 @@ build-2 -> build-3 (sane-1.0.1) * inversion of calibration is automatically set for Astra 6X0S and Vista S6E - * check for machine endianess is done only at backend start now! + * check for machine endianness is done only at backend start now! * made umax_do request_sense static @@ -566,7 +566,7 @@ build-7 -> build-8 * for Mirage D-16L the driver does not wait any more until scanner is repositioned this is experimental, it may work with other scanners too! - * Mirage D-16L does not give back informations for calibration by driver, + * Mirage D-16L does not give back information for calibration by driver, added new modus that "guesses" the values for Mirage D-16L. * Added read_shading_data to 16 bit calibration routine and made a routine for @@ -594,7 +594,7 @@ build-8 -> build-9 * gamma table is disabled in lineart and halftone modes - * if image is transmitted completly sane_read (close_pipe) + * if image is transmitted completely sane_read (close_pipe) returns with SANE_STATUS_GOOD in adf mode and in any other case with SANE_STATUS_EOF @@ -735,7 +735,7 @@ build-19 -> build-20 * added variable calibration_width_offset, Mirage D-16L offset of 308 is defined there and added offset of 28 for PowerLook III - * umax_do_calibration: guessed calibration data vaules use 2 bytes/color if scanner + * umax_do_calibration: guessed calibration data values use 2 bytes/color if scanner supports gamma input bit depth supports 2 bytes/color * calibration by driver now does work for PowerLook III @@ -780,7 +780,7 @@ build-21 -> build-22 higher scsi-ID (=priority) does scan without stops, the other scanner has to wait long time between the scsi-read commands, it also is possible to give - bothe scanners different scsi command queueing depth). + both scanners different scsi command queueing depth). * prepared replacement of pipe by sanei_ipc_* routines @@ -915,7 +915,7 @@ build-25 -> build-26 * added Mirage II as supported scanner * added routine umax_set_max_geometry that defines available surface - and resolution in dependance of scansource and double optical resolution + and resolution in dependence of scansource and double optical resolution (before this bugfix the change of dor mode overwrote the settings of scansource and vice versa) @@ -927,7 +927,7 @@ build-25 -> build-26 * sane_exit does free devlist - * added some options for Powerlook 3000 - still is not completly supported + * added some options for Powerlook 3000 - still is not completely supported build-26 -> build-27 @@ -1140,7 +1140,7 @@ build-41 -> build-42 * replaced fork() routines by sanei_thread routines - * added call sanei_scsi_req_flush_all(); to do_cancel - in threaded case this is not done when reader_process is cancled + * added call sanei_scsi_req_flush_all(); to do_cancel - in threaded case this is not done when reader_process is canceled * in reader_process: marked freed scsi buffers as freed(NULL). This is necessary when reader_process is run as thread! @@ -1156,7 +1156,7 @@ build-42 -> build-43 build-43 -> build-44 -------------------- - * the sense_hanlder stores the sense data in buffer[0] when valid sense data is avialable + * the sense_handler stores the sense data in buffer[0] when valid sense data is available * do_calibration: - corrected bug in reading calibration width from scanner (added /bytespp) @@ -1167,5 +1167,5 @@ build-43 -> build-44 build-44 -> build-45 -------------------- - * added defualt options for Linotype Opal2 + * added default options for Linotype Opal2 * changed bug in highlight-blue function (using green value) |