diff options
Diffstat (limited to 'doc')
207 files changed, 6780 insertions, 6933 deletions
diff --git a/doc/.gitignore b/doc/.gitignore new file mode 100644 index 0000000..076d975 --- /dev/null +++ b/doc/.gitignore @@ -0,0 +1,25 @@ +*.1 +*.5 +*.7 +*.8 +*.eps +*.html +*.pdf +descriptions-external.db +descriptions.db +doxygen-genesys.conf +doxygen-sanei.conf +doxygen_sqlite3.db +genesys-html +sane.aux +sane.cb +sane.dvi +sane.idx +sane.ilg +sane.ind +sane.lof +sane.log +sane.lot +sane.ps +sane.toc +sanei-html diff --git a/doc/Makefile.am b/doc/Makefile.am index 162d01a..56d3517 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -19,12 +19,12 @@ EXTRA_DIST = scanimage.man sane-config.man sane-find-scanner.man \ BACKEND_5MANS = sane-abaton.5 sane-agfafocus.5 sane-apple.5 sane-as6e.5 \ sane-dll.5 sane-dc25.5 sane-dmc.5 sane-epson.5 sane-epson2.5 sane-epsonds.5 \ - sane-hp.5 sane-gphoto2.5 sane-leo.5 sane-lexmark.5 \ + sane-escl.5 sane-hp.5 sane-gphoto2.5 sane-leo.5 sane-lexmark.5 \ sane-matsushita.5 sane-microtek.5 sane-microtek2.5 sane-mustek.5 \ sane-nec.5 sane-net.5 sane-pie.5 sane-pieusb.5 sane-pint.5 sane-pnm.5 \ sane-umax.5 sane-qcam.5 sane-scsi.5 sane-artec.5 sane-kodak.5 sane-kodakaio.5 \ sane-fujitsu.5 sane-sharp.5 sane-s9036.5 sane-tamarack.5 \ - sane-ricoh.5 sane-avision.5 sane-plustek.5 sane-st400.5 \ + sane-ricoh.5 sane-ricoh2.5 sane-avision.5 sane-plustek.5 sane-st400.5 \ sane-mustek_pp.5 sane-dc210.5 sane-v4l.5 sane-snapscan.5 \ sane-canon.5 sane-coolscan.5 sane-bh.5 sane-dc240.5 \ sane-umax_pp.5 sane-umax1220u.5 sane-sm3600.5 sane-usb.5 \ @@ -41,13 +41,13 @@ BACKEND_5MANS = sane-abaton.5 sane-agfafocus.5 sane-apple.5 sane-as6e.5 \ EXTRA_DIST += sane-abaton.man sane-agfafocus.man sane-apple.man sane-as6e.man \ sane-dll.man sane-dc25.man sane-dmc.man sane-epson.man \ - sane-epson2.man sane-epsonds.man sane-hp.man sane-gphoto2.man sane-leo.man \ - sane-lexmark.man sane-matsushita.man sane-microtek.man \ + sane-epson2.man sane-epsonds.man sane-escl.man sane-hp.man sane-gphoto2.man \ + sane-leo.man sane-lexmark.man sane-matsushita.man sane-microtek.man \ sane-microtek2.man sane-mustek.man sane-nec.man sane-net.man \ sane-pie.man sane-pieusb.man sane-pint.man sane-pnm.man sane-umax.man \ sane-qcam.man sane-scsi.man sane-artec.man sane-fujitsu.man \ sane-sharp.man sane-s9036.man sane-tamarack.man sane-kodak.man sane-kodakaio.man\ - sane-ricoh.man sane-avision.man sane-plustek.man sane-st400.man \ + sane-ricoh.man sane-ricoh2.man sane-avision.man sane-plustek.man sane-st400.man \ sane-mustek_pp.man sane-dc210.man sane-v4l.man sane-snapscan.man \ sane-canon.man sane-coolscan.man sane-bh.man sane-dc240.man \ sane-umax_pp.man sane-umax1220u.man sane-sm3600.man sane-usb.man \ @@ -157,7 +157,7 @@ DESC_FILES = descriptions/abaton.desc descriptions/agfafocus.desc \ descriptions/dc210.desc descriptions/dc240.desc descriptions/dc25.desc \ descriptions/dell1600n_net.desc descriptions/dll.desc descriptions/dmc.desc \ descriptions/epjitsu.desc descriptions/epson2.desc descriptions/epson.desc \ - descriptions/epsonds.desc \ + descriptions/epsonds.desc descriptions/escl.desc \ descriptions/fujitsu.desc descriptions/genesys.desc \ descriptions/gphoto2.desc descriptions/gt68xx.desc descriptions/hp3500.desc \ descriptions/hp3900.desc descriptions/hp4200.desc descriptions/hp5400.desc \ @@ -174,7 +174,8 @@ DESC_FILES = descriptions/abaton.desc descriptions/agfafocus.desc \ descriptions/niash.desc descriptions/pie.desc descriptions/pieusb.desc descriptions/pint.desc \ descriptions/p5.desc descriptions/pixma.desc descriptions/plustek.desc \ descriptions/plustek_pp.desc descriptions/pnm.desc descriptions/qcam.desc \ - descriptions/ricoh.desc descriptions/rts8891.desc descriptions/s9036.desc \ + descriptions/ricoh.desc descriptions/ricoh2.desc \ + descriptions/rts8891.desc descriptions/s9036.desc \ descriptions/sceptre.desc descriptions/sharp.desc descriptions/sm3600.desc \ descriptions/sm3840.desc descriptions/snapscan.desc descriptions/sp15c.desc \ descriptions/st400.desc descriptions/stv680.desc descriptions/tamarack.desc \ @@ -183,12 +184,11 @@ DESC_FILES = descriptions/abaton.desc descriptions/agfafocus.desc \ descriptions/umax1220u.desc descriptions/umax.desc \ descriptions/umax_pp.desc descriptions/unsupported.desc \ descriptions/v4l.desc descriptions/xerox_mfp.desc -EXTRA_DIST += $(DESC_FILES) descriptions/template.desc. +EXTRA_DIST += $(DESC_FILES) descriptions/template.desc. DESC_EXT_FILES = descriptions-external/brother2.desc \ descriptions-external/brother.desc \ descriptions-external/brother-mfc4600.desc \ - descriptions-external/canon_mfp.desc \ descriptions-external/cs3200f.desc \ descriptions-external/epkowa.desc \ descriptions-external/geniusvp2.desc \ @@ -203,6 +203,7 @@ DESC_EXT_FILES = descriptions-external/brother2.desc \ descriptions-external/primascan.desc \ descriptions-external/primax.desc \ descriptions-external/samsung.desc \ + descriptions-external/scangearmp2.desc \ descriptions-external/scanwit.desc \ descriptions-external/utsushi.desc \ descriptions-external/v4l2.desc \ diff --git a/doc/Makefile.in b/doc/Makefile.in deleted file mode 100644 index d678cf1..0000000 --- a/doc/Makefile.in +++ /dev/null @@ -1,1062 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@WITH_API_PS_TRUE@am__append_1 = sane.ps -@WITH_API_PDF_TRUE@am__append_2 = sane.pdf -@WITH_API_HTML_TRUE@am__append_3 = sane-html -subdir = doc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/mkinstalldirs $(srcdir)/doxygen-sanei.conf.in \ - $(srcdir)/doxygen-genesys.conf.in $(dist_doc_DATA) \ - $(nobase_dist_doc_DATA) -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/acinclude.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/byteorder.m4 $(top_srcdir)/m4/stdint.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/sane/config.h -CONFIG_CLEAN_FILES = doxygen-sanei.conf doxygen-genesys.conf -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" \ - "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" \ - "$(DESTDIR)$(docdir)" "$(DESTDIR)$(docdir)" -man7dir = $(mandir)/man7 -man8dir = $(mandir)/man8 -NROFF = nroff -MANS = $(man1_MANS) $(man7_MANS) $(man8_MANS) -DATA = $(dist_doc_DATA) $(doc_DATA) $(nobase_dist_doc_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALLOCA = @ALLOCA@ -AMTAR = @AMTAR@ -AM_CFLAGS = @AM_CFLAGS@ -AM_CPPFLAGS = @AM_CPPFLAGS@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AM_LDFLAGS = @AM_LDFLAGS@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AVAHI_CFLAGS = @AVAHI_CFLAGS@ -AVAHI_LIBS = @AVAHI_LIBS@ -AWK = @AWK@ -BACKENDS = @BACKENDS@ -BACKEND_CONFS_ENABLED = @BACKEND_CONFS_ENABLED@ -BACKEND_LIBS_ENABLED = @BACKEND_LIBS_ENABLED@ -BACKEND_MANS_ENABLED = @BACKEND_MANS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLH = @DLH@ -DLLTOOL = @DLLTOOL@ -DL_LIBS = @DL_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -DVIPS = @DVIPS@ -DYNAMIC_FLAG = @DYNAMIC_FLAG@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -FIG2DEV = @FIG2DEV@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GPHOTO2_CPPFLAGS = @GPHOTO2_CPPFLAGS@ -GPHOTO2_LDFLAGS = @GPHOTO2_LDFLAGS@ -GPHOTO2_LIBS = @GPHOTO2_LIBS@ -GREP = @GREP@ -GS = @GS@ -HAVE_GPHOTO2 = @HAVE_GPHOTO2@ -IEEE1284_LIBS = @IEEE1284_LIBS@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_LOCKPATH = @INSTALL_LOCKPATH@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -JPEG_LIBS = @JPEG_LIBS@ -LATEX = @LATEX@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIBV4L_CFLAGS = @LIBV4L_CFLAGS@ -LIBV4L_LIBS = @LIBV4L_LIBS@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LOCKPATH_GROUP = @LOCKPATH_GROUP@ -LTALLOCA = @LTALLOCA@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINDEX = @MAKEINDEX@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MATH_LIB = @MATH_LIB@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PDFLATEX = @PDFLATEX@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PNG_LIBS = @PNG_LIBS@ -POSUB = @POSUB@ -PPMTOGIF = @PPMTOGIF@ -PRELOADABLE_BACKENDS = @PRELOADABLE_BACKENDS@ -PRELOADABLE_BACKENDS_ENABLED = @PRELOADABLE_BACKENDS_ENABLED@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -RANLIB = @RANLIB@ -RESMGR_LIBS = @RESMGR_LIBS@ -SANEI_SANEI_JPEG_LO = @SANEI_SANEI_JPEG_LO@ -SANE_CONFIG_PATH = @SANE_CONFIG_PATH@ -SCSI_LIBS = @SCSI_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SNMP_CFLAGS = @SNMP_CFLAGS@ -SNMP_CONFIG_PATH = @SNMP_CONFIG_PATH@ -SNMP_LIBS = @SNMP_LIBS@ -SOCKET_LIBS = @SOCKET_LIBS@ -STRICT_LDFLAGS = @STRICT_LDFLAGS@ -STRIP = @STRIP@ -SYSLOG_LIBS = @SYSLOG_LIBS@ -SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@ -SYSTEMD_LIBS = @SYSTEMD_LIBS@ -TIFF_LIBS = @TIFF_LIBS@ -USB_CFLAGS = @USB_CFLAGS@ -USB_LIBS = @USB_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -V_MAJOR = @V_MAJOR@ -V_MINOR = @V_MINOR@ -V_REV = @V_REV@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -configdir = @configdir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -effective_target = @effective_target@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -locksanedir = @locksanedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -man1_MANS = scanimage.1 sane-config.1 sane-find-scanner.1 gamma4scanimage.1 -EXTRA_DIST = scanimage.man sane-config.man sane-find-scanner.man \ - gamma4scanimage.man sane-abaton.man sane-agfafocus.man \ - sane-apple.man sane-as6e.man sane-dll.man sane-dc25.man \ - sane-dmc.man sane-epson.man sane-epson2.man sane-epsonds.man \ - sane-hp.man sane-gphoto2.man sane-leo.man sane-lexmark.man \ - sane-matsushita.man sane-microtek.man sane-microtek2.man \ - sane-mustek.man sane-nec.man sane-net.man sane-pie.man \ - sane-pieusb.man sane-pint.man sane-pnm.man sane-umax.man \ - sane-qcam.man sane-scsi.man sane-artec.man sane-fujitsu.man \ - sane-sharp.man sane-s9036.man sane-tamarack.man sane-kodak.man \ - sane-kodakaio.man sane-ricoh.man sane-avision.man \ - sane-plustek.man sane-st400.man sane-mustek_pp.man \ - sane-dc210.man sane-v4l.man sane-snapscan.man sane-canon.man \ - sane-coolscan.man sane-bh.man sane-dc240.man sane-umax_pp.man \ - sane-umax1220u.man sane-sm3600.man sane-usb.man \ - sane-mustek_usb.man sane-sceptre.man sane-canon_pp.man \ - sane-canon630u.man sane-teco1.man sane-teco2.man \ - sane-teco3.man sane-test.man sane-sp15c.man sane-coolscan2.man \ - sane-hpsj5s.man sane-gt68xx.man sane-artec_eplus48u.man \ - sane-ma1509.man sane-ibm.man sane-hp5400.man \ - sane-plustek_pp.man sane-u12.man sane-niash.man \ - sane-sm3840.man sane-genesys.man sane-hp4200.man \ - sane-mustek_usb2.man sane-hp3500.man sane-pixma.man \ - sane-stv680.man sane-hp5590.man sane-hpljm1005.man \ - sane-cardscan.man sane-hp3900.man sane-epjitsu.man \ - sane-hs2p.man sane-canon_dr.man sane-xerox_mfp.man \ - sane-rts8891.man sane-coolscan3.man sane-kvs1025.man \ - sane-kvs20xx.man sane-kvs40xx.man sane-p5.man \ - sane-magicolor.man sane.man saned.man descriptions.txt \ - releases.txt sane-logo2.jpg sane-logo.png sane.png \ - $(DESC_FILES) descriptions/template.desc. $(DESC_EXT_FILES) \ - descriptions-external/template.desc. $(API_SPEC_INPUTS) \ - $(API_SPEC_TEX_FIGS) $(API_SPEC_HTML_ICONS) - -# Create a list of man pages for only backends that are compiled in so -# that is all that gets installed. Also, build a complete list of all -# backend man pages. This allows a user to optionally generate all -# man pages in HTML form for things like posting to a web site. -# -# Backend man pages bypass standard automake man5_MANS because there is not -# a man page for every supported backend. We could get rid of -# custom install/uninstall if we required man pages for every backend. -BACKEND_5MANS = sane-abaton.5 sane-agfafocus.5 sane-apple.5 sane-as6e.5 \ - sane-dll.5 sane-dc25.5 sane-dmc.5 sane-epson.5 sane-epson2.5 sane-epsonds.5 \ - sane-hp.5 sane-gphoto2.5 sane-leo.5 sane-lexmark.5 \ - sane-matsushita.5 sane-microtek.5 sane-microtek2.5 sane-mustek.5 \ - sane-nec.5 sane-net.5 sane-pie.5 sane-pieusb.5 sane-pint.5 sane-pnm.5 \ - sane-umax.5 sane-qcam.5 sane-scsi.5 sane-artec.5 sane-kodak.5 sane-kodakaio.5 \ - sane-fujitsu.5 sane-sharp.5 sane-s9036.5 sane-tamarack.5 \ - sane-ricoh.5 sane-avision.5 sane-plustek.5 sane-st400.5 \ - sane-mustek_pp.5 sane-dc210.5 sane-v4l.5 sane-snapscan.5 \ - sane-canon.5 sane-coolscan.5 sane-bh.5 sane-dc240.5 \ - sane-umax_pp.5 sane-umax1220u.5 sane-sm3600.5 sane-usb.5 \ - sane-mustek_usb.5 sane-sceptre.5 sane-canon_pp.5 sane-canon630u.5 \ - sane-teco1.5 sane-teco2.5 sane-teco3.5 sane-test.5 sane-sp15c.5 \ - sane-coolscan2.5 sane-hpsj5s.5 sane-gt68xx.5 sane-artec_eplus48u.5 \ - sane-ma1509.5 sane-ibm.5 sane-hp5400.5 sane-plustek_pp.5 sane-u12.5 \ - sane-niash.5 sane-sm3840.5 sane-genesys.5 sane-hp4200.5 \ - sane-mustek_usb2.5 sane-hp3500.5 sane-pixma.5 sane-stv680.5 \ - sane-hp5590.5 sane-hpljm1005.5 sane-cardscan.5 sane-hp3900.5 \ - sane-epjitsu.5 sane-hs2p.5 sane-canon_dr.5 sane-xerox_mfp.5 \ - sane-rts8891.5 sane-coolscan3.5 sane-kvs1025.5 sane-kvs20xx.5 \ - sane-kvs40xx.5 sane-p5.5 sane-magicolor.5 - -man7_MANS = sane.7 -man8_MANS = saned.8 -MANPAGES = $(man1_MANS) $(BACKEND_5MANS) $(man7_MANS) $(man8_MANS) -@CROSS_COMPILING_FALSE@HTML_PAGES = sane-backends.html sane-backends-external.html \ -@CROSS_COMPILING_FALSE@ sane-mfgs.html sane-mfgs-external.html - -@CROSS_COMPILING_TRUE@HTML_PAGES = -doc_DATA = $(HTML_PAGES) $(API_SPECS) -dist_doc_DATA = backend-writing.txt -nobase_dist_doc_DATA = $(BEDOCS) -MAN2HTML = nroff -c -man |\ - man2html -compress -topm 6 -botm 6 -nodepage -title $${page} \ - -cgiurl '$$title.$$section.html'|\ - sed 's,<BODY>,<BODY BGCOLOR=\#FFFFFF TEXT=\#000000><H1 ALIGN=CENTER><IMG SRC="/images/sane.png" HEIGHT=117 WIDTH=346></H1>,' - -beman5dir = $(mandir)/man5 -BEDOCS = canon/canon.changes canon/canon.install2700F.txt \ - gt68xx/gt68xx.CHANGES gt68xx/gt68xx.TODO leo/leo.txt \ - matsushita/matsushita.txt mustek/mustek.CHANGES \ - mustek_usb/mustek_usb.CHANGES mustek_usb/mustek_usb.TODO \ - mustek_usb2/mustek_usb2.CHANGES mustek_usb2/mustek_usb2.TODO \ - niash/niash.TODO plustek/FAQ plustek/MakeModule.sh \ - plustek/Makefile.kernel24 plustek/Makefile.kernel26 \ - plustek/Plustek-PARPORT-TODO.txt \ - plustek/Plustek-PARPORT.changes plustek/Plustek-PARPORT.txt \ - plustek/Plustek-USB-TODO.txt plustek/Plustek-USB.changes \ - plustek/Plustek-USB.txt sceptre/s1200.txt teco/teco1.txt \ - teco/teco2.txt teco/teco3.txt u12/U12.changes u12/U12.todo \ - umax/negative-types.txt umax/sane-logo.jpg \ - umax/sane-umax-advanced-options-doc.html \ - umax/sane-umax-advanced.jpg umax/sane-umax-astra-doc.html \ - umax/sane-umax-config-doc.html umax/sane-umax-doc.html \ - umax/sane-umax-histogram.jpg umax/sane-umax-mirage-doc.html \ - umax/sane-umax-not-listed-doc.html \ - umax/sane-umax-others-doc.html umax/sane-umax-parport-doc.html \ - umax/sane-umax-powerlook-doc.html \ - umax/sane-umax-scanner-clones-doc.html \ - umax/sane-umax-speed-doc.html \ - umax/sane-umax-standard-options-doc.html \ - umax/sane-umax-standard.jpg umax/sane-umax-text.jpg \ - umax/sane-umax-text2.jpg umax/sane-umax-text4.jpg \ - umax/sane-umax-uc-doc.html umax/sane-umax-vista-doc.html \ - umax/sane-umax.jpg umax/umax.BUGS umax/umax.CHANGES \ - umax/umax.FAQ umax/umax.TODO -DESC_FILES = descriptions/abaton.desc descriptions/agfafocus.desc \ - descriptions/apple.desc descriptions/artec.desc \ - descriptions/artec_eplus48u.desc descriptions/as6e.desc \ - descriptions/avision.desc descriptions/bh.desc descriptions/canon630u.desc \ - descriptions/canon.desc descriptions/canon_dr.desc \ - descriptions/canon_pp.desc descriptions/cardscan.desc \ - descriptions/coolscan2.desc descriptions/coolscan.desc \ - descriptions/coolscan3.desc \ - descriptions/dc210.desc descriptions/dc240.desc descriptions/dc25.desc \ - descriptions/dell1600n_net.desc descriptions/dll.desc descriptions/dmc.desc \ - descriptions/epjitsu.desc descriptions/epson2.desc descriptions/epson.desc \ - descriptions/epsonds.desc \ - descriptions/fujitsu.desc descriptions/genesys.desc \ - descriptions/gphoto2.desc descriptions/gt68xx.desc descriptions/hp3500.desc \ - descriptions/hp3900.desc descriptions/hp4200.desc descriptions/hp5400.desc \ - descriptions/hp5590.desc descriptions/hp.desc descriptions/hpljm1005.desc \ - descriptions/hpsj5s.desc descriptions/hs2p.desc descriptions/ibm.desc \ - descriptions/kodak.desc descriptions/kodakaio.desc descriptions/kvs1025.desc \ - descriptions/kvs20xx.desc descriptions/kvs40xx.desc \ - descriptions/leo.desc descriptions/lexmark.desc descriptions/ma1509.desc \ - descriptions/magicolor.desc \ - descriptions/matsushita.desc descriptions/microtek2.desc \ - descriptions/microtek.desc descriptions/mustek.desc \ - descriptions/mustek_pp.desc descriptions/mustek_usb2.desc \ - descriptions/mustek_usb.desc descriptions/nec.desc descriptions/net.desc \ - descriptions/niash.desc descriptions/pie.desc descriptions/pieusb.desc descriptions/pint.desc \ - descriptions/p5.desc descriptions/pixma.desc descriptions/plustek.desc \ - descriptions/plustek_pp.desc descriptions/pnm.desc descriptions/qcam.desc \ - descriptions/ricoh.desc descriptions/rts8891.desc descriptions/s9036.desc \ - descriptions/sceptre.desc descriptions/sharp.desc descriptions/sm3600.desc \ - descriptions/sm3840.desc descriptions/snapscan.desc descriptions/sp15c.desc \ - descriptions/st400.desc descriptions/stv680.desc descriptions/tamarack.desc \ - descriptions/teco1.desc descriptions/teco2.desc descriptions/teco3.desc \ - descriptions/test.desc descriptions/u12.desc \ - descriptions/umax1220u.desc descriptions/umax.desc \ - descriptions/umax_pp.desc descriptions/unsupported.desc \ - descriptions/v4l.desc descriptions/xerox_mfp.desc - -DESC_EXT_FILES = descriptions-external/brother2.desc \ - descriptions-external/brother.desc \ - descriptions-external/brother-mfc4600.desc \ - descriptions-external/canon_mfp.desc \ - descriptions-external/cs3200f.desc \ - descriptions-external/epkowa.desc \ - descriptions-external/geniusvp2.desc \ - descriptions-external/hp3770.desc \ - descriptions-external/hp8200.desc \ - descriptions-external/hpaio.desc \ - descriptions-external/hpoj.desc \ - descriptions-external/kodak-twain.desc \ - descriptions-external/lhii.desc \ - descriptions-external/mustek_a3p1.desc \ - descriptions-external/panamfs.desc \ - descriptions-external/primascan.desc \ - descriptions-external/primax.desc \ - descriptions-external/samsung.desc \ - descriptions-external/scanwit.desc \ - descriptions-external/utsushi.desc \ - descriptions-external/v4l2.desc \ - descriptions-external/viceo.desc - -API_SPECS = $(am__append_1) $(am__append_2) $(am__append_3) -API_SPEC_INPUTS = $(srcdir)/sane.tex $(srcdir)/net.tex -API_SPEC_TEX_FIGS = figs/area.fig figs/flow.fig figs/hierarchy.fig \ - figs/image-data.fig figs/xfer.fig -API_SPEC_EPS_FIGS = figs/area.eps figs/flow.eps figs/hierarchy.eps \ - figs/image-data.eps figs/xfer.eps -API_SPEC_PDF_FIGS = figs/area.pdf figs/flow.pdf figs/hierarchy.pdf \ - figs/image-data.pdf figs/xfer.pdf -API_SPEC_HTML_ICONS = icons/contents.gif icons/index.gif \ - icons/next.gif icons/next_gr.gif icons/previous.gif \ - icons/previous_gr.gif icons/references.gif \ - icons/references_gr.gif icons/up.gif icons/up_gr.gif -am_TEXINPUTS = TEXINPUTS="$(builddir):$(srcdir):$$TEXINPUTS" -all: all-am - -.SUFFIXES: -.SUFFIXES: .eps .fig .pdf -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -doxygen-sanei.conf: $(top_builddir)/config.status $(srcdir)/doxygen-sanei.conf.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -doxygen-genesys.conf: $(top_builddir)/config.status $(srcdir)/doxygen-genesys.conf.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-man1: $(man1_MANS) - @$(NORMAL_INSTALL) - @list1='$(man1_MANS)'; \ - list2=''; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -install-man7: $(man7_MANS) - @$(NORMAL_INSTALL) - @list1='$(man7_MANS)'; \ - list2=''; \ - test -n "$(man7dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.7[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \ - done; } - -uninstall-man7: - @$(NORMAL_UNINSTALL) - @list='$(man7_MANS)'; test -n "$(man7dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir) -install-man8: $(man8_MANS) - @$(NORMAL_INSTALL) - @list1='$(man8_MANS)'; \ - list2=''; \ - test -n "$(man8dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.8[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ - done; } - -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) -install-dist_docDATA: $(dist_doc_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ - done - -uninstall-dist_docDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) -install-docDATA: $(doc_DATA) - @$(NORMAL_INSTALL) - @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ - done - -uninstall-docDATA: - @$(NORMAL_UNINSTALL) - @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) -install-nobase_dist_docDATA: $(nobase_dist_doc_DATA) - @$(NORMAL_INSTALL) - @list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ - fi; \ - $(am__nobase_list) | while read dir files; do \ - xfiles=; for file in $$files; do \ - if test -f "$$file"; then xfiles="$$xfiles $$file"; \ - else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ - test -z "$$xfiles" || { \ - test "x$$dir" = x. || { \ - echo " $(MKDIR_P) '$(DESTDIR)$(docdir)/$$dir'"; \ - $(MKDIR_P) "$(DESTDIR)$(docdir)/$$dir"; }; \ - echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(docdir)/$$dir'"; \ - $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(docdir)/$$dir" || exit $$?; }; \ - done - -uninstall-nobase_dist_docDATA: - @$(NORMAL_UNINSTALL) - @list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ - dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(MANS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(docdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-local - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: html-local - -info: info-am - -info-am: - -install-data-am: install-data-local install-dist_docDATA \ - install-docDATA install-man install-nobase_dist_docDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 install-man7 install-man8 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_docDATA uninstall-docDATA uninstall-local \ - uninstall-man uninstall-nobase_dist_docDATA - -uninstall-man: uninstall-man1 uninstall-man7 uninstall-man8 - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - clean-local cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distclean-local distdir dvi dvi-am html \ - html-am html-local info info-am install install-am \ - install-data install-data-am install-data-local \ - install-dist_docDATA install-docDATA install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-man1 install-man7 install-man8 \ - install-nobase_dist_docDATA install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-dist_docDATA uninstall-docDATA \ - uninstall-local uninstall-man uninstall-man1 uninstall-man7 \ - uninstall-man8 uninstall-nobase_dist_docDATA - - -all: bemans $(API_SPECS) html-pages - -%.1 %.5 %.7 %.8: %.man - @echo "Generating manpage $@..."; - @sed -e 's|@DATADIR@|$(datadir)|g' \ - -e 's|@CONFIGDIR@|$(configdir)|g' \ - -e 's|@DOCDIR@|$(docdir)|g' \ - -e 's|@LIBDIR@|$(libdir)/sane|g' \ - -e 's|@BINDIR@|$(bindir)|g' \ - -e 's|@SBINDIR@|$(sbindir)|g' \ - -e 's|@PACKAGEVERSION@|$(package_version)|g' $^ >$@ - -bemans: $(BACKEND_5MANS) -install-beman5: $(BACKEND_5MANS) - test -z "$(beman5dir)" || $(MKDIR_P) "$(DESTDIR)$(beman5dir)" - @list="$(BACKEND_MANS_ENABLED) sane-dll.5 sane-scsi.5 sane-usb.5"; for man in $$list; do \ - if test ! -r $${man}; then continue; fi; \ - echo "installing $${man} in $(beman5dir)/$${man}..."; \ - $(INSTALL_DATA) $${man} $(DESTDIR)$(beman5dir)/$${man} \ - || exit 1; \ - done - -install-data-local: install-beman5 - -uninstall-local: - rm -rf $(DESTDIR)$(beman5dir)/sane-*.5 - -sane.ind: $(API_SPEC_INPUTS) - @echo Generating index for $<... - @touch sane.ind - @$(am_TEXINPUTS) $(LATEX) $< </dev/null >/dev/null && \ - $(MAKEINDEX) -q sane.idx && \ - $(am_TEXINPUTS) $(LATEX) $< </dev/null >/dev/null - -.fig.eps: - @test -d $(@D) || $(MKDIR_P) $(@D) - $(FIG2DEV) -L eps $< $@ - -sane.dvi: $(API_SPEC_INPUTS) $(API_SPEC_EPS_FIGS) sane.ind - @echo Generating $@ from $<... - @$(am_TEXINPUTS) $(LATEX) $< </dev/null >/dev/null - -sane.ps: sane.dvi - @echo Generating $@ from $<... - @$(am_TEXINPUTS) $(DVIPS) -q $< -o $@ - -.fig.pdf: - @test -d $(@D) || $(MKDIR_P) $(@D) - $(FIG2DEV) -L pdf $< $@ - -sane.pdf: $(API_SPEC_INPUTS) $(API_SPEC_PDF_FIGS) sane.ind - @echo Generating $@ from $<... - @$(am_TEXINPUTS) $(PDFLATEX) $< >/dev/null - -sane-html: sane.dvi - $(am_TEXINPUTS) $(DLH) $(srcdir)/sane.tex - -html-man: $(MANPAGES) - @for page in $(MANPAGES); do \ - echo "translating $${page} to $${page}.html..."; \ - cat $${page} | $(MAN2HTML) > $${page}.html; \ - done - -../tools/sane-desc: - cd ../tools ; $(MAKE) sane-desc - -sane-backends.html: $(DESC_FILES) ../tools/sane-desc - @../tools/sane-desc -m html-backends-split -s ${srcdir}/descriptions \ - -i "The following table summarizes the backends/drivers distributed \ - with $(PACKAGE)-$(VERSION), and the hardware or software they \ - support." -d 0 > sane-backends.html - -sane-backends-external.html: $(DESC_EXT_FILES) ../tools/sane-desc - @../tools/sane-desc -m html-backends-split \ - -s ${srcdir}/descriptions-external \ - -i "The following table summarizes the backends/drivers that \ - have not yet been included in the SANE distribution, and the \ - hardware or software they support." \ - -t "SANE: External Backends (Drivers)" -d 0 \ - > sane-backends-external.html - -sane-mfgs.html: $(DESC_FILES) ../tools/sane-desc - @../tools/sane-desc -m html-mfgs -s ${srcdir}/descriptions \ - -i "The following table summarizes the devices supported \ - by $(PACKAGE)-$(VERSION)." \ - -d 0 > sane-mfgs.html - -sane-mfgs-external.html: $(DESC_EXT_FILES) ../tools/sane-desc - @../tools/sane-desc -m html-mfgs -s ${srcdir}/descriptions-external \ - -i "The following table summarizes the devices that \ - are supported by external backends." \ - -t "SANE: Devices Supported by External Backends" -d 0 \ - > sane-mfgs-external.html - -descriptions.db: $(DESC_FILES) ../tools/sane-desc - @../tools/sane-desc -m ascii -s ${srcdir}/descriptions \ - > descriptions.db - -descriptions-external.db: $(DESC_EXT_FILES) ../tools/sane-desc - @../tools/sane-desc -m ascii -s ${srcdir}/descriptions-external \ - > descriptions-external.db - -html-pages: $(HTML_PAGES) -html-local: html-pages html-man sane-html - -clean-local: - rm -f *.toc *.aux *.log *.cp *.fn *.tp *.vr *.pg *.ky *.blg *.idx *.cb - rm -f *.ilg - rm -f $(API_SPEC_EPS_FIGS) $(API_SPEC_PDF_FIGS) - -rmdir figs - -distclean-local: - rm -f $(MANPAGES) - rm -f *.lot *.lof *.ind - rm -f sane.dvi sane.ps sane-backends.html sane-backends-external.html - rm -f sane-mfgs.html sane-mfgs-external.html - rm -f sane/*.html sane/*.gif - rm -f doxygen-sanei.conf doxygen-genesys.conf - -rm -rf sane sanei-html - for manpage in $(MANPAGES) ; do \ - rm -f $${manpage}.html ; \ - done - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/doc/backend-writing.txt b/doc/backend-writing.txt index 7e34d6a..736fcec 100644 --- a/doc/backend-writing.txt +++ b/doc/backend-writing.txt @@ -1,4 +1,4 @@ -2006-01-01 +2019-08-26 Here are a few rules and tips that should help writing a SANE-conforming backend and including it into the SANE package: @@ -45,12 +45,11 @@ CONFIGURATION AND BUILD SYSTEM Sane-backends uses the autoconf and automake tools. The configure script is generated from configure.ac and aclocal.m4 by running "autoreconf". Simple checks (e.g. for headers) should be placed into configure.ac while -for more complex stuff acinclude.m4 is the right file. After changes in one +for more complex stuff acinclude.m4 is the right file. After changes in one of these files, "autoreconf" should be called. This will then call a chain of autotools, such as autoconf to generate configure, autoheader to generate include/sane/config.h.in, and automake to generate various -Makefile.in's from Makefile.am's. All changes made by "autoreconf" must -be commited together. +Makefile.in's from Makefile.am's. When running configure, the Makefiles in the main and sub-directories are created from their respective Makefile.in files. Also include/sane/config.h @@ -60,13 +59,13 @@ Running "make" runs the respective targets in the sub directories recursively. The Makefile.am in each directory contains lists of files which are part of the distribution and which are therefore copied to the tar.gz archive, when a -release is made. It's important that newly added files are also added to +release is made. It's important that newly added files are also added to a variable that will cause them to be distributed (EXTRA_DIST at a minimum). For creating binaries and libraries libtool is used. The ltmain.sh script -contains special modifications for SANE. These modifications ensure that -the soname of each SANE backend library is "libsane.so". Without this -change, backend libraries (like "libsane-epson.so") could not used as +contains special modifications for SANE. These modifications ensure that +the soname of each SANE backend library is "libsane.so". Without this +change, backend libraries (like "libsane-epson.so") could not used as on-the-fly replacement for the dll backend. DIRECTORY OVERVIEW @@ -76,37 +75,29 @@ This chapter explains some details about the files and directories used in the sane-backends distribution. sane-backends/ - * acinclude.m4 aclocal.m4 compile config.guess config.sub configure + * acinclude.m4 aclocal.m4 compile config.guess config.sub configure configure.ac depcomp install-sh ltmain.sh Makefile.am Makefile.in missing mkinstalldirs: Part of the build system as explained above. * ChangeLog: - The ChangeLog contains all the changes made since the last stable release. - If anything is changed in git, write a decent commit message documenting - your work. This commit message will be included as is in the ChangeLog - file for the next stable release. Users of development code should refer - to the `git log` output or the on-line log. - For more details on the format, see the SANE git page on the website. - * ChangeLog-1.0.0, ChangeLog-1.0.1 (...): - These files contain the ChangeLogs of older releases. Once a new release has - been made, the current ChangeLog renamed to ChangeLog-1.something.something - and a new empty ChangeLog is created. + The ChangeLog contains all the changes made since sane-backends-1.0.28 + or a stub explaining how to create an up-to-date list of changes. + ChangeLogs for all releases up to and including 1.0.28 can be found in + the ChangeLogs/ directory. Please note that we skipped 1.0.26. * AUTHORS COPYING INSTALL LICENSE: General documentation + license. * NEWS: This is some kind of executive summary of the ChangeLog. It will be created - before a release. + before a release. * PROBLEMS: General (severe) problems that all SANE users should be - aware. Backend-specific trouble should normally not mentioned there. + aware. Backend-specific trouble should normally not mentioned there. * PROJECTS: Planned SANE-related development (e.g. ports, frontends). New backends won't be listed here but a new .desc file will be created for them (see below). * README: General building instructions. * README.aix README.beos (...): - Platform-dependent building and usage instructions. - * sane-backends.lsm: - The .lsm file as used for the ibiblio archive. + Platform-dependent building and usage instructions. sane-backends/backend/ This is where the actual backend code is placed. As an example the file @@ -117,13 +108,13 @@ sane-backends/backend/ directory. Code which is useful for more than one backend should be placed in sanei/ instead. * newbackend.c: - The main backend file, usually contains the SANE API code. Mandatory. + The main backend file, usually contains the SANE API code. Mandatory. * newbackend.h: Header file, containing includes and so on. * newbackend.conf.in: - Configuration file for the backend, newbackend.conf will be created by - running "make" from this file. Some variables are substituted, e.g. for - installation directories. This is especially useful for firmware + Configuration file for the backend, newbackend.conf will be created by + running "make" from this file. Some variables are substituted, e.g. for + installation directories. This is especially useful for firmware directories. See Makefile.am for a list. * newbackend-low.c: Contains low level code for the "newbackend" backend. Depending on the @@ -147,16 +138,16 @@ sane-backends/backend/ sane-backends/doc/ Documentation for SANE. For some more details, see chapter DOCUMENTATION below. Again an example for "newbackend": - * sane-newbackend.man: + * sane-newbackend.man: The manual page of the backend. From this file, "sane-newbackend.5" is - generated by running "make". + generated by running "make". * newbackend/ (directory) Contains additional information about newbackend, e.g. READMEs or TODO - files. + files. General files: * Makefile.am: "sane-newbackend.5" must be added to variable BACKEND_5MANS and - "sane-newbackend.man" to EXTRA_DIST. A backend documentation directory + "sane-newbackend.man" to EXTRA_DIST. A backend documentation directory (if used) must be added to the BEDOCS variable. * backend-writing.txt: This file. @@ -169,13 +160,13 @@ sane-backends/doc/ * sane.tex, net.tex: Contains the LaTeX source of the SANE standard. * descriptions/ (directory) - Contains the .desc files for every backend that is included into + Contains the .desc files for every backend that is included into sane-backends. * descriptions-external/ (directory) Contains the .desc files for backend that are not included into sane-backends yet (external backends). These files should only be created if the code it points to is really a SANE backend (and not just a command - line program). + line program). sane-backends/frontend/ Contains the frontends scanimage, saned, and tstbackend. @@ -186,8 +177,8 @@ sane-backends/include/ SANE-specific headers are located in include/sane/: * config.h.in: Main header file needed for portablility. config.h is created from this - file and must be included by every backend. - * sane.h: + file and must be included by every backend. + * sane.h: Official SANE API header file. Don't change this without discussion on the sane-devel mailing list. * saneopts.h: @@ -202,14 +193,14 @@ sane-backends/japi/ sane-backends/lib/ Contains various library functions that may miss in the standard C library - of some platforms. + of some platforms. sane-backends/po/ Translations of SANEbackend options. See README for details. sane-backends/sanei/ Sanei (SANE internal) code. Needed for code used in several backends - like USB access. For more details, see the documentaion on the SANE + like USB access. For more details, see the documentaion on the SANE website. sane-backends/testsuite/ @@ -231,14 +222,14 @@ PROGRAMMING least: - add the backend name to ALL_BACKENDS in configure.ac (and run autoreconf) - Add new backend to BACKEND_CONFS, be_convenience_libs, be_dlopen_libs, - and define _lib${backend}_la_SOURCES and + and define _lib${backend}_la_SOURCES and nodist_libsane_${backend}_la_SOURCES; using an existing backend as a template. Any sanei reference code should be listed in libsane_${backend}_la_LIBADD as well as any external libraries required to resolve all symbols. - - Add the source code files to the backend/ directories. All file names + - Add the source code files to the backend/ directories. All file names must start with the backend name (e.g. newbackend.c, newbackend.h and - newbackend-usb.c). + newbackend-usb.c). * Please follow the GNU coding standards. It's clear that the style outlined there is nobody's favorite, but it's much easier to @@ -295,7 +286,7 @@ PROGRAMMING * If you use headers or libraries that may not be available on all systems, write a check for configure.ac and include it conditionally. If your backend - depends on these libraries or headers, compile the backend only if they are + depends on these libraries or headers, compile the backend only if they are available (see pint for an example). * Use #include ".../include/sane/..." to include the sane header files @@ -311,9 +302,9 @@ PROGRAMMING * It's no longer necessary to #define PATH_MAX (now in sanei_backend.h). If you define it, do so *after* the system includes. -* Please use sanei functions whenever possible (e.g. +* Please use sanei functions whenever possible (e.g. sanei_config_read()). This makes porting to other os/platforms much - easier. Most of these functions are documented in their respective + easier. Most of these functions are documented in their respective header files in include/sane/sanei_*.h. For most of them there is also documentation in doxygen format: http://www.sane-project.org/sanei/. These HTML pages can be generated by calling "doxygen sanei-doxygen.conf" in @@ -389,7 +380,7 @@ TESTING compiled nor installed by default. To do that, cd into frontend and run "make tstbackend". -* Please test a backend not just with scanimage and xscanimage +* Please test a backend not just with scanimage and xscanimage (+ other frontends), but also with saned. Based on past experience, it is often the case that remote scanning can uncover subtle bugs. Note that you don't have to use two different machines to test "remote" @@ -402,7 +393,7 @@ TESTING access to other platforms, ask sane-devel. * Please make sure that all global symbols exported from a SANE backend start - with the prefix "sane" or "sanei" to avoid clashes with exported symbols + with the prefix "sane" or "sanei" to avoid clashes with exported symbols of other backends. Only symbols mentioned in the SANE standard should start with "sane_*". Make sure, the sanei_* symbols are unique, e.g. by using sanei_backendname_*. Only export symbols that are absolutely necessary. @@ -410,7 +401,7 @@ TESTING nm -g backend/.libs/libsane-hp.a - would list all global symbols in the HP backend. + would list all global symbols in the HP backend. "./configure; make; make libcheck" in the sane-backends root directory will name all backend libraries, that contain "illegal" symbols. @@ -433,14 +424,14 @@ DOCUMENTATION also a template for new .desc files: "template.desc.". The format of the files in the two directories is very similar. If you'd like to try parsing your creation to recreate the sane-backends webpages, cd into "tools/" and - enter "make sane-desc". You can either use sane-desc directly (try - "./sane-desc -h") or use "make html-pages" in "doc/". + enter "make sane-desc". You can either use sane-desc directly (try + "./sane-desc -h") or use "make html-pages" in "doc/". * For external backends, you don't need to supply :manpage and :version. The manpage link won't work anyway and version will be outdated soon. * When your backend is included in the SANE distribution, add an entry to - doc/sane.man, AUTHORS and sane-backends.lsm. The sane.man entry should point + doc/sane.man and AUTHORS. The sane.man entry should point to your documentation (man-page, website, readme). Also move your .desc file from "doc/descriptions-external" to "doc/descriptions" and update them. @@ -458,7 +449,7 @@ DOCUMENTATION version numbers. -CHECKLIST: SUBMITTING A NEW BACKEND +CHECKLIST: SUBMITTING A NEW BACKEND ----------------------------------- In sane-backends/ @@ -481,7 +472,7 @@ In sane-backends/doc/ check the html pages result with a browser. * Check that the backend version is the same in the source and in the description file. - + In sane-backends/po/ * Add all files using SANE_I18N() to po/POTFILES diff --git a/doc/canon/canon.changes b/doc/canon/canon.changes index 30eb6e9..f07c225 100644 --- a/doc/canon/canon.changes +++ b/doc/canon/canon.changes @@ -37,6 +37,3 @@ Version 990201: because it sets the resolution down first. * I have included a new directory containing scripts I find useful. - - - diff --git a/doc/canon/canon.install2700F.txt b/doc/canon/canon.install2700F.txt index 923a6d4..b80e8d9 100644 --- a/doc/canon/canon.install2700F.txt +++ b/doc/canon/canon.install2700F.txt @@ -1,6 +1,6 @@ ----------------------------------------------------------------------- -How to install a CanoScan 2700F on a Linux box ? +How to install a CanoScan 2700F on a Linux box ? by Stephan Hegel <ea273@fen.baynet.de>. Date: Fri Jan 15 16:13:15 MEZ 1999 ----------------------------------------------------------------------- @@ -17,13 +17,13 @@ Corrections and suggestions are welcome, of course. Thank you. ----------------------------------------- The AVA-1502AP is is a small ISA Adaptec SCSI controller which is - shipped with the CanoScan slide scanner. Per default is has the + shipped with the CanoScan slide scanner. Per default is has the address 0x140, the IRQ 10 and the SCSI host id 7. Check first for conflicts with your already existing hardware. Install the controller into the computer. - After starting the BIOS should detect the board as a PNP board. + After starting the BIOS should detect the board as a PNP board. Boot the computer with the "SCSISelect" disk which is shipped with the scanner to check that the controller is detected. Don't change any settings except address, IRQ or SCSI id if necessary. @@ -32,13 +32,13 @@ Corrections and suggestions are welcome, of course. Thank you. SCSI Support (yes) SCSI Generic support (yes) Low level driver for aha152x (yes) - Note: here you can try to compile the SCSI support as modules as + Note: here you can try to compile the SCSI support as modules as long as you don't boot the computer from a SCSI disk. But this is not tested. Compile and install the new Linux kernel. - Add "aha152x=0x140,10,7" to the "append" line to the already existing + Add "aha152x=0x140,10,7" to the "append" line to the already existing kernel parameters in lilo.conf, e.g: ------------------- # Linux bootable partition config begins @@ -46,7 +46,7 @@ Corrections and suggestions are welcome, of course. Thank you. root = /dev/hdc1 label = linux append = "sbpcd=0x230,SoundBlaster aha152x=0x140,10,7" - # Linux bootable partition config ends + # Linux bootable partition config ends ------------------- Invoke lilo to activate the changes. @@ -64,12 +64,12 @@ Corrections and suggestions are welcome, of course. Thank you. on" since the scanner is the one and only device connected to my host adapter. - Turn on the scanner first and wait for a few second. The scanner + Turn on the scanner first and wait for a few second. The scanner performs a short self test. Turn on the computer. - Watch the boot messages, there should be a message indicating that + Watch the boot messages, there should be a message indicating that the SCSI host adapter and the scanner are there. Now you can check again that the scanner device is there: @@ -85,18 +85,18 @@ Corrections and suggestions are welcome, of course. Thank you. Fetch the latest SANE distribution from the SANE homepage at: http://www.sane-project.org/ - + Unpack and configure it. - + Get the latest canon backend from Manuel's homepage: http://www.rzg.mpg.de/~mpd/sane Put the files in the sane/backend directory as described in the README of the package. This overwrites the existing canon.* files with the latest version of these files. - + Compile and install SANE. - + Add the "canon" scanner to the /usr/local/etc/sane.d/dll.conf file: -------- cut here ------------ # enable the next line if you want to allow access through the network: @@ -108,12 +108,12 @@ Corrections and suggestions are welcome, of course. Thank you. #umax canon -------- cut here ------------ - + Add a "canon.conf" file to the /usr/local/etc/sane.d directory: -------- cut here ------------ - scsi CANON + scsi CANON -------- cut here ------------ - + Check the available scanners: scanimage -L This should give something like this: @@ -122,14 +122,14 @@ Corrections and suggestions are welcome, of course. Thank you. device `pnm:1' is a Noname PNM file reader virtual device Invoke the frontend: - xscanimage & - NOTE: The "xscanimage" frontend is in the SANE distribution. There - is also another SANE frontend available which is called "xsane" by - Oliver Rauch. It is still under heavy development and can be grabbed + xscanimage & + NOTE: The "xscanimage" frontend is in the SANE distribution. There + is also another SANE frontend available which is called "xsane" by + Oliver Rauch. It is still under heavy development and can be grabbed from: http://www.wolfsburg.de/~rauch - A dialog box appears, select the canon scanner and here we go ... + A dialog box appears, select the canon scanner and here we go ... Happy scanning !!! - + ----------------------------------------------------------------------- diff --git a/doc/descriptions-external/brother-mfc4600.desc b/doc/descriptions-external/brother-mfc4600.desc index 1d57e47..1f03591 100644 --- a/doc/descriptions-external/brother-mfc4600.desc +++ b/doc/descriptions-external/brother-mfc4600.desc @@ -12,11 +12,9 @@ :backend "brother-mfc4600" ; name of backend ;:version "0.42" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://sourceforge.net/projects/brother-mfc" -;:comment "" +;:comment "" ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -32,6 +30,3 @@ :interface "USB" :usbid "0x04f9" "0x0111" :comment "Only USB version of this scanner is supported. Please report how well it works. See link." - - - diff --git a/doc/descriptions-external/brother.desc b/doc/descriptions-external/brother.desc index a261712..e935a53 100644 --- a/doc/descriptions-external/brother.desc +++ b/doc/descriptions-external/brother.desc @@ -12,11 +12,9 @@ :backend "brother" ; name of backend ;:version "1.0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://solutions.brother.com/linux/sol/printer/linux/sane_drivers.html" ; backend's web page -:comment "External backend made by brother. As this software contains non-free parts, it can't be included into SANE. If you can't find your model here, please have a look at the brother website which contains the latest list." +:comment "External backend made by brother. As this software contains non-free parts, it can't be included into SANE. If you can't find your model here, please have a look at the brother website which contains the latest list." ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -400,4 +398,3 @@ :interface "USB" :usbid "0x04f9" "0x011b" :comment "There is a report that this scanner does not work with the brother backend (I/O errors)" - diff --git a/doc/descriptions-external/brother2.desc b/doc/descriptions-external/brother2.desc index 92b5450..6be12ec 100644 --- a/doc/descriptions-external/brother2.desc +++ b/doc/descriptions-external/brother2.desc @@ -12,11 +12,9 @@ :backend "brother2" ; name of backend ;:version "1.0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://solutions.brother.com/linux/sol/printer/linux/sane_drivers.html" ; backend's web page -:comment "External backend made by brother. As this software contains non-free parts, it can't be included into SANE. If you can't find your model here, please have a look at the brother website which contains the latest list." +:comment "External backend made by brother. As this software contains non-free parts, it can't be included into SANE. If you can't find your model here, please have a look at the brother website which contains the latest list." ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions-external/canon_mfp.desc b/doc/descriptions-external/canon_mfp.desc deleted file mode 100644 index e181d53..0000000 --- a/doc/descriptions-external/canon_mfp.desc +++ /dev/null @@ -1,73 +0,0 @@ -; -; SANE Backend specification file -; -; It's basically emacs-lisp --- so ";" indicates comment to end of line. -; All syntactic elements are keyword tokens, followed by a string or -; keyword argument, as specified. -; -; ":backend" *must* be specified. -; All other information is optional (but what good is the file without it?). -; -; See doc/descriptions.txt for details. - -:backend "canon_mfp" ; name of backend -;:version "1.0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no -;:manpage "sane-template" ; name of manpage (if it exists) -:url "http://cweb.canon.jp/drv-upd/bj/other.html#linux"; -:url "http://support-asia.canon-asia.com/"; -:comment "External backend made by canon. As this software contains non-free parts, it can't be included into SANE. If you can't find your model here, please have a look at the canon website which contains the latest list." -:comment "Note: these backend are designed by Canon and are part of their proprietary scanning software. They may not work at all with SANE, or with SANE frontends." - ; comment about the backend - -:devicetype :scanner ; start of a list of devices.... - ; other types: :stillcam, :vidcam, - ; :meta, :api - -:mfg "Canon" ; name a manufacturer -:url "http://www.canon.com/" ; manufacturer's URL -;:comment "" - ; comment about the manufacturer - -:model "MP140" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x172b" -:comment "No report yet." - -:model "MP160" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1714" -:comment "No report yet." - -:model "MP210" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1721" -:comment "No report yet." - -:model "MP510" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1717" -:comment "No report yet." - -:model "MP520" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1724" -:comment "No report yet." - -:model "MP600" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1718" -:comment "No report yet." - -:model "MP610" -:status :untested -:interface "USB" -:usbid "0x04a9" "0x1725" -:comment "Could not have it working with SANE." diff --git a/doc/descriptions-external/cs3200f.desc b/doc/descriptions-external/cs3200f.desc index b734d02..4d22d95 100644 --- a/doc/descriptions-external/cs3200f.desc +++ b/doc/descriptions-external/cs3200f.desc @@ -12,11 +12,9 @@ :backend "cs3200f" ; name of backend ;:version "0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-cs3200f" ; name of manpage (if it exists) ;:url "http://www.luser.com/temp/" ; backend's web page -:comment "Backend is in experimental CVS" +:comment "Backend is in experimental CVS" ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions-external/hp3770.desc b/doc/descriptions-external/hp3770.desc index 7c2c60e..03ce486 100644 --- a/doc/descriptions-external/hp3770.desc +++ b/doc/descriptions-external/hp3770.desc @@ -12,11 +12,9 @@ :backend "hp3770" ; name of backend ;:version "0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://www.cyberbaladeur.fr/telechargement.html" ; backend's web page -:comment "This backend can't be added to the SANE distribution because it consists of binary-only code." +:comment "This backend can't be added to the SANE distribution because it consists of binary-only code." ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions-external/hp8200.desc b/doc/descriptions-external/hp8200.desc index 7dcf663..7593d67 100644 --- a/doc/descriptions-external/hp8200.desc +++ b/doc/descriptions-external/hp8200.desc @@ -12,11 +12,9 @@ :backend "hp8200" ; name of backend ;:version "0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://www.cyberbaladeur.fr/telechargement.html" ; backend's web page -:comment "This backend can't be added to the SANE distribution because it consists of binary-only code." +:comment "This backend can't be added to the SANE distribution because it consists of binary-only code." ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -37,4 +35,3 @@ :usbid "0x03f0" "0x0b01" :url "http://ftp.cyberbaladeur.fr/82xxc%20Linux%20drivers.tar.gz" ; model's URL :comment "External backend. Binary-only Linux i386 code. Not supported by the SANE developers." - diff --git a/doc/descriptions-external/hpaio.desc b/doc/descriptions-external/hpaio.desc index 5b4cc5c..611d877 100644 --- a/doc/descriptions-external/hpaio.desc +++ b/doc/descriptions-external/hpaio.desc @@ -10,148 +10,568 @@ :devicetype :scanner ; start of a list of devices.... :mfg "Hewlett-Packard" ; name a manufacturer :url "http://www.hp.com/united-states/consumer/gateway/printing_multifunction.html" -:model "HP Officejet v30 All-in-one Printer" +:model "HP 915 Inkjet All-in-one Printer" :status :good -:model "HP Officejet v40xi All-in-one Printer" +:model "HP cm8050 Color Multifunction Printer With Edgeline Technology" :status :good -:model "HP Officejet v40s All-in-one Printer" +:model "HP cm8060 Color Multifunction Printer With Edgeline Technology" :status :good -:model "HP Officejet r40 All-in-one Printer" +:model "HP Color LaserJet 2800 All-in-one Printer" :status :good -:model "HP Officejet v40 All-in-one Printer" +:model "HP Color LaserJet 2820 All-in-one Printer" :status :good -:model "HP Officejet r40xi All-in-one Printer" +:model "HP Color LaserJet 2830 All-in-one Printer" :status :good -:model "HP Officejet t45xi All-in-one Printer" +:model "HP Color LaserJet 2840 All-in-one Printer" :status :good -:model "HP Officejet r45 All-in-one Printer" +:model "HP Color LaserJet 4730 Multifunction Printer" :status :good -:model "HP Officejet v45 All-in-one Printer" +:model "HP Color LaserJet 4730x Multifunction Printer" :status :good -:model "HP Officejet t45 All-in-one Printer" +:model "HP Color LaserJet 4730xm Multifunction Printer" :status :good -:model "HP Officejet g55 All-in-one Printer" +:model "HP Color LaserJet 4730xs Multifunction Printer" :status :good -:model "HP Officejet g55xi All-in-one Printer" +:model "HP Color LaserJet cm1015 Multifunction Printer" :status :good -:model "HP Officejet k60 All-in-one Printer" +:model "HP Color LaserJet cm1017 Multifunction Printer" :status :good -:model "HP Officejet r60 All-in-one Printer" +:model "HP Color LaserJet cm1312 Multifunction Printer" :status :good -:model "HP Officejet k60xi All-in-one Printer" +:model "HP Color LaserJet cm1312nfi Multifunction Printer" :status :good -:model "HP Officejet t65xi All-in-one Printer" +:model "HP Color LaserJet cm2320 Multifunction Printer" :status :good -:model "HP Officejet t65 All-in-one Printer" +:model "HP Color LaserJet cm2320fxi Multifunction Printer" :status :good -:model "HP Officejet r65 All-in-one Printer" +:model "HP Color LaserJet cm2320n Multifunction Printer" :status :good -:model "HP Officejet k80 All-in-one Printer" +:model "HP Color LaserJet cm2320nf Multifunction Printer" :status :good -:model "HP Officejet k80xi All-in-one Printer" +:model "HP Color LaserJet cm4730 Multifunction Printer" :status :good -:model "HP Officejet r80xi All-in-one Printer" +:model "HP Color LaserJet cm4730f Multifunction Printer" :status :good -:model "HP Officejet r80 All-in-one Printer" +:model "HP Color LaserJet cm4730fm Multifunction Printer" :status :good -:model "HP Officejet g85 All-in-one Printer" +:model "HP Color LaserJet cm4730fsk Multifunction Printer" :status :good -:model "HP Officejet g85xi All-in-one Printer" +:model "HP Color LaserJet Enterprise Flow MFP m776z" :status :good -:model "HP Officejet g95 All-in-one Printer" +:model "HP Color LaserJet Enterprise Flow MFP m776zs" :status :good -:model "HP Photosmart All-in-one Printer - b109d" +:model "HP Color LaserJet Enterprise MFP m776dn" :status :good -:model "HP Photosmart All-in-one Printer - b109e" +:model "HP Color LaserJet Managed Flow MFP e67560z" :status :good -:model "HP Photosmart All-in-one Printer - b109c" +:model "HP Color LaserJet Managed Flow MFP e67660z" :status :good -:model "HP Photosmart All-in-one Printer - b109a" +:model "HP Color LaserJet Managed Flow MFP e77822z" :status :good -:model "HP Photosmart Wireless All-in-one Printer - b109q" +:model "HP Color LaserJet Managed Flow MFP e77825z" :status :good -:model "HP Photosmart Wireless All-in-one Printer - b109n" +:model "HP Color LaserJet Managed Flow MFP e77830z" :status :good -:model "HP Photosmart Wireless All-in-one Printer - b109q=r" +:model "HP Color LaserJet Managed Flow MFP e87640z" :status :good -:model "HP Officejet d125xi All-in-one Printer" +:model "HP Color LaserJet Managed Flow MFP e87650z" :status :good -:model "HP Officejet d135 All-in-one Printer" +:model "HP Color LaserJet Managed Flow MFP e87660z" :status :good -:model "HP Officejet d135xi All-in-one Printer" +:model "HP Color LaserJet Managed MFP e67650dh" :status :good -:model "HP Officejet d145xi All-in-one Printer" +:model "HP Color LaserJet Managed MFP e77422a" :status :good -:model "HP Officejet d145 All-in-one Printer" +:model "HP Color LaserJet Managed MFP e77422dn" :status :good -:model "HP Officejet d155xi All-in-one Printer" +:model "HP Color LaserJet Managed MFP e77422dv" :status :good -:model "HP Deskjet Ink Advantage k209a All-in-one Printer" +:model "HP Color LaserJet Managed MFP e77428dn" :status :good -:model "HP Photosmart Plus All-in-one Printer - b209a" +:model "HP Color LaserJet Managed MFP e77822dn" :status :good -:model "HP Photosmart Plus All-in-one Printer - b209b" +:model "HP Color LaserJet Managed MFP e77825dn" :status :good -:model "HP Photosmart Plus All-in-one Printer - b209c" +:model "HP Color LaserJet Managed MFP e77830dn" :status :good -:model "HP Printer Scanner Copier 300" +:model "HP Color LaserJet Managed MFP e87640 Dn" :status :good -:model "HP Photosmart Premium All-in-one Printer Series - c309h" +:model "HP Color LaserJet Managed MFP e87640 Du" :status :good -:model "HP Photosmart Premium All-in-one Printer Series - c309g" +:model "HP Color LaserJet Managed MFP e87650dn" :status :good -:model "HP Photosmart Premium Fax All-in-one Printer - c309a" +:model "HP Color LaserJet Managed MFP e87650du" :status :good -:model "HP Photosmart Premium Fax All-in-one Printer Series -c309c" +:model "HP Color LaserJet Managed MFP e87660dn" :status :good -:model "HP Photosmart Premium Fax All-in-one Printer Series -c309a" +:model "HP Color LaserJet Managed MFP e87660du" +:status :good + +:model "HP Color LaserJet MFP m277c6" +:status :good + +:model "HP Color LaserJet MFP m277dw" +:status :good + +:model "HP Color LaserJet MFP m277n" +:status :good + +:model "HP Color LaserJet MFP m377 Fnw" +:status :good + +:model "HP Color LaserJet Pro MFP m178cn" +:status :good + +:model "HP Color LaserJet Pro MFP m178n" +:status :good + +:model "HP Color LaserJet Pro MFP m179cfw" +:status :good + +:model "HP Color LaserJet Pro MFP m179fw" +:status :good + +:model "HP Color LaserJet Pro MFP m180cn" +:status :good + +:model "HP Color LaserJet Pro MFP m180n" +:status :good + +:model "HP Color LaserJet Pro MFP m180nw" +:status :good + +:model "HP Color LaserJet Pro MFP m181cfw" +:status :good + +:model "HP Color LaserJet Pro MFP m181fnw" +:status :good + +:model "HP Color LaserJet Pro MFP m181fw" +:status :good + +:model "HP Color LaserJet Pro MFP m274n" +:status :good + +:model "HP Color LaserJet Pro MFP m278cw" +:status :good + +:model "HP Color LaserJet Pro MFP m278dn" +:status :good + +:model "HP Color LaserJet Pro MFP m278nw" +:status :good + +:model "HP Color LaserJet Pro MFP m279fdw" +:status :good + +:model "HP Color LaserJet Pro MFP m280c2" +:status :good + +:model "HP Color LaserJet Pro MFP m280cnw" +:status :good + +:model "HP Color LaserJet Pro MFP m280nw" +:status :good + +:model "HP Color LaserJet Pro MFP m281cdw" +:status :good + +:model "HP Color LaserJet Pro MFP m281dne" +:status :good + +:model "HP Color LaserJet Pro MFP m281fdn" +:status :good + +:model "HP Color LaserJet Pro MFP m281fdw" +:status :good + +:model "HP Color LaserJet Pro MFP m476dn" +:status :good + +:model "HP Color LaserJet Pro MFP m476dw" +:status :good + +:model "HP Color LaserJet Pro MFP m476nw" +:status :good + +:model "HP Color LaserJet Pro MFP m477 Fdn" +:status :good + +:model "HP Color LaserJet Pro MFP m477 Fdw" +:status :good + +:model "HP Color LaserJet Pro MFP m477 Fnw" +:status :good + +:model "HP Color LaserJet Pro MFP m478fcdn" +:status :good + +:model "HP Color LaserJet Pro MFP m478fcdw" +:status :good + +:model "HP Color LaserJet Pro MFP m479dw" +:status :good + +:model "HP Color LaserJet Pro MFP m479fcdn" +:status :good + +:model "HP Color LaserJet Pro MFP m479fcdw" +:status :good + +:model "HP Color LaserJet Pro MFP m479fdn" +:status :good + +:model "HP Color LaserJet Pro MFP m479fdw" +:status :good + +:model "HP Color LaserJet Pro MFP m479fnw" +:status :good + +:model "HP Color LaserJet Pro Mpf m176n" +:status :good + +:model "HP Color LaserJet Pro Mpf m177fw" +:status :good + +:model "HP Designjet 4500mfp" +:status :good + +:model "HP Designjet 4520mfp" +:status :good + +:model "HP Designjet t790ps 24in" +:status :good + +:model "HP Deskjet 1050 j410 All-in-one Printer" +:status :good + +:model "HP Deskjet 1051 All-in-one Printer" +:status :good + +:model "HP Deskjet 1055 All-in-one Printer -j410e" +:status :good + +:model "HP Deskjet 1056 All-in-one Printer -j410a" +:status :good + +:model "HP Deskjet 1510 All-in-one Printer" +:status :good + +:model "HP Deskjet 1511 All-in-one Printer" +:status :good + +:model "HP Deskjet 1512 All-in-one Printer" +:status :good + +:model "HP Deskjet 1513 All-in-one Printer" +:status :good + +:model "HP Deskjet 1514 All-in-one Printer" +:status :good + +:model "HP Deskjet 2050 j510 All-in-one Printer" +:status :good + +:model "HP Deskjet 2130 All-in-one Printer Series" +:status :good + +:model "HP Deskjet 2131 All-in-one Printer" +:status :good + +:model "HP Deskjet 2132 All-in-one Printer" +:status :good + +:model "HP Deskjet 2134 All-in-one Printer" +:status :good + +:model "HP Deskjet 2200 All-in-one" +:status :good + +:model "HP Deskjet 2510 All-in-one Printer" +:status :good + +:model "HP Deskjet 2511 All-in-one Printer" +:status :good + +:model "HP Deskjet 2512 All-in-one Printer" +:status :good + +:model "HP Deskjet 2514 All-in-one Printer" +:status :good + +:model "HP Deskjet 2540 All-in-one Printer" +:status :good + +:model "HP Deskjet 2541 All-in-one Printer" +:status :good + +:model "HP Deskjet 2542 All-in-one Printer" +:status :good + +:model "HP Deskjet 2543 All-in-one Printer" +:status :good + +:model "HP Deskjet 2544 All-in-one Printer" +:status :good + +:model "HP Deskjet 2545 All-in-one Printer" +:status :good + +:model "HP Deskjet 2546b All-in-one Printer" +:status :good + +:model "HP Deskjet 2546p All-in-one Printer" +:status :good + +:model "HP Deskjet 2546r All-in-one Printer" +:status :good + +:model "HP Deskjet 2549 All-in-one Printer" +:status :good + +:model "HP Deskjet 2620 All-in-one" +:status :good + +:model "HP Deskjet 2621 All-in-one" +:status :good + +:model "HP Deskjet 2622 All-in-one" +:status :good + +:model "HP Deskjet 2623 All-in-one" +:status :good + +:model "HP Deskjet 3050 j610 Series" +:status :good + +:model "HP Deskjet 3050a j611 Series" +:status :good + +:model "HP Deskjet 3051a E-all-in-one Printer j611h" +:status :good + +:model "HP Deskjet 3052a E-all-in-one Printer j611e" +:status :good + +:model "HP Deskjet 3052a E-all-in-one Printer j611f" +:status :good + +:model "HP Deskjet 3052a E-all-in-one Printer j611g" +:status :good + +:model "HP Deskjet 3054a E-all-in-one Printer j611c" +:status :good + +:model "HP Deskjet 3054a E-all-in-one Printer j611d" +:status :good + +:model "HP Deskjet 3054a E-all-in-one Printer j611j" +:status :good + +:model "HP Deskjet 3055a E-all-in-one Printer j611n" +:status :good + +:model "HP Deskjet 3056a E-all-in-one Printer" +:status :good + +:model "HP Deskjet 3057a E-all-in-one Printer j611n" +:status :good + +:model "HP Deskjet 3059a E-all-in-one Printer j611n" +:status :good + +:model "HP Deskjet 3070 b611 Series" +:status :good + +:model "HP Deskjet 3510 E-all-in-one" +:status :good + +:model "HP Deskjet 3511 E-all-in-one" +:status :good + +:model "HP Deskjet 3512 E-all-in-one" +:status :good + +:model "HP Deskjet 3520 E-all-in-one Series" +:status :good + +:model "HP Deskjet 3521 E-all-in-one Printer" +:status :good + +:model "HP Deskjet 3522 E-all-in-one Printer" +:status :good + +:model "HP Deskjet 3524 E-all-in-one Printer" +:status :good + +:model "HP Deskjet 3526 E-all-in-one Printer" +:status :good + +:model "HP Deskjet 3630 All-in-one Printer" +:status :good + +:model "HP Deskjet 3632 All-in-one Printer" +:status :good + +:model "HP Deskjet 3633 All-in-one Printer" +:status :good + +:model "HP Deskjet 3634 All-in-one Printer" +:status :good + +:model "HP Deskjet 3700 All-in-one" +:status :good + +:model "HP Deskjet 3722 All-in-one" +:status :good + +:model "HP Deskjet f2110 All-in-one Printer" +:status :good + +:model "HP Deskjet f2120 All-in-one Printer" +:status :good + +:model "HP Deskjet f2128 All-in-one Printer" +:status :good + +:model "HP Deskjet f2140 All-in-one Printer" +:status :good + +:model "HP Deskjet f2179 All-in-one Printer" +:status :good + +:model "HP Deskjet f2180 All-in-one Printer" +:status :good + +:model "HP Deskjet f2185 All-in-one Printer" +:status :good + +:model "HP Deskjet f2187 All-in-one Printer" +:status :good + +:model "HP Deskjet f2188 All-in-one Printer" +:status :good + +:model "HP Deskjet f2210 All-in-one Printer" +:status :good + +:model "HP Deskjet f2212 All-in-one Printer" +:status :good + +:model "HP Deskjet f2214 All-in-one Printer" +:status :good + +:model "HP Deskjet f2224 All-in-one Printer" +:status :good + +:model "HP Deskjet f2235 All-in-one Printer" +:status :good + +:model "HP Deskjet f2238 All-in-one Printer" +:status :good + +:model "HP Deskjet f2240 All-in-one Printer" +:status :good + +:model "HP Deskjet f2250 All-in-one Printer" +:status :good + +:model "HP Deskjet f2275 All-in-one Printer" +:status :good + +:model "HP Deskjet f2276 All-in-one Printer" +:status :good + +:model "HP Deskjet f2280 All-in-one Printer" +:status :good + +:model "HP Deskjet f2288 All-in-one Printer" +:status :good + +:model "HP Deskjet f2290 All-in-one Printer" +:status :good + +:model "HP Deskjet f2410 All-in-one Printer" +:status :good + +:model "HP Deskjet f2418 All-in-one Printer" +:status :good + +:model "HP Deskjet f2420 All-in-one Printer" +:status :good + +:model "HP Deskjet f2423 All-in-one Printer" +:status :good + +:model "HP Deskjet f2430 All-in-one Printer" +:status :good + +:model "HP Deskjet f2440 All-in-one Printer" +:status :good + +:model "HP Deskjet f2476 All-in-one Printer" +:status :good + +:model "HP Deskjet f2480 All-in-one Printer" +:status :good + +:model "HP Deskjet f2483 All-in-one Printer" +:status :good + +:model "HP Deskjet f2488 All-in-one Printer" +:status :good + +:model "HP Deskjet f2492 All-in-one Printer" +:status :good + +:model "HP Deskjet f2493 All-in-one Printer" :status :good :model "HP Deskjet f310 All-in-one Printer" @@ -196,670 +616,844 @@ :model "HP Deskjet f394 All-in-one Printer" :status :good -:model "HP PSC 500xi All-in-one Printer" +:model "HP Deskjet f4135 All-in-one Printer" :status :good -:model "HP PSC 500 All-in-one Printer" +:model "HP Deskjet f4140 All-in-one Printer" :status :good -:model "HP Officejet 500 All-in-one Printer" +:model "HP Deskjet f4150 All-in-one Printer" :status :good -:model "HP Officejet 520 All-in-one Printer" +:model "HP Deskjet f4172 All-in-one Printer" :status :good -:model "HP Officejet 570 All-in-one Printer" +:model "HP Deskjet f4175 All-in-one Printer" :status :good -:model "HP Officejet 580 All-in-one Printer" +:model "HP Deskjet f4180 All-in-one Printer" :status :good -:model "HP Officejet 590 All-in-one Printer" +:model "HP Deskjet f4185 All-in-one Printer" :status :good -:model "HP Officejet 600 All-in-one Printer" +:model "HP Deskjet f4188 All-in-one Printer" :status :good -:model "HP Officejet 610 All-in-one Printer" +:model "HP Deskjet f4190 All-in-one Printer" :status :good -:model "HP Officejet 630 All-in-one Printer" +:model "HP Deskjet f4194 All-in-one Printer" :status :good -:model "HP Officejet 635 All-in-one Printer" +:model "HP Deskjet f4210 All-in-one Printer" :status :good -:model "HP Officejet 700 All-in-one Printer" +:model "HP Deskjet f4213 All-in-one Printer" :status :good -:model "HP Officejet 710 All-in-one Printer" +:model "HP Deskjet f4224 All-in-one Printer" :status :good -:model "HP PSC 720 All-in-one Printer" +:model "HP Deskjet f4230 All-in-one Printer" :status :good -:model "HP Officejet 720 All-in-one Printer" +:model "HP Deskjet f4235 All-in-one Printer" :status :good -:model "HP Officejet 725 All-in-one Printer" +:model "HP Deskjet f4238 All-in-one Printer" +:status :good + +:model "HP Deskjet f4240 All-in-one Printer" +:status :good + +:model "HP Deskjet f4250 All-in-one Printer" +:status :good + +:model "HP Deskjet f4272 All-in-one Printer" +:status :good + +:model "HP Deskjet f4273 All-in-one Printer" +:status :good + +:model "HP Deskjet f4274 All-in-one Printer" +:status :good + +:model "HP Deskjet f4275 All-in-one Printer" +:status :good + +:model "HP Deskjet f4280 All-in-one Printer" +:status :good + +:model "HP Deskjet f4283 All-in-one Printer" +:status :good + +:model "HP Deskjet f4288 All-in-one Printer" +:status :good + +:model "HP Deskjet f4292 All-in-one Printer" +:status :good + +:model "HP Deskjet f4293 All-in-one Printer" +:status :good + +:model "HP Deskjet f4294 All-in-one Printer" +:status :good + +:model "HP Deskjet f4435 All-in-one Printer" +:status :good + +:model "HP Deskjet f4440 All-in-one Printer" +:status :good + +:model "HP Deskjet f4450 All-in-one Printer" +:status :good + +:model "HP Deskjet f4470 All-in-one Printer" +:status :good + +:model "HP Deskjet f4472 All-in-one Printer" +:status :good + +:model "HP Deskjet f4473 All-in-one Printer" +:status :good + +:model "HP Deskjet f4480 All-in-one Printer" +:status :good + +:model "HP Deskjet f4483 All-in-one Printer" +:status :good + +:model "HP Deskjet f4488 All-in-one Printer" +:status :good + +:model "HP Deskjet f4492 All-in-one Printer" +:status :good + +:model "HP Deskjet f4500 All-in-one Printer Series" :status :good :model "HP Deskjet f735 All-in-one Printer" :status :good -:model "HP PSC 750 All-in-one Printer" +:model "HP Deskjet Gt 5810 All-in-one Printer" :status :good -:model "HP PSC 750xi All-in-one Printer" +:model "HP Deskjet Gt 5820 All-in-one Printer" :status :good -:model "HP PSC 760 All-in-one Printer" +:model "HP Deskjet Ink Adv 2060 k110" :status :good -:model "HP PSC 780 All-in-one Printer" +:model "HP Deskjet Ink Advantage 1510 All-in-one Printer Series" :status :good -:model "HP PSC 780xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 1515 All-in-one Printer" :status :good -:model "HP PSC 900 All-in-one Printer" +:model "HP Deskjet Ink Advantage 1516 All-in-one Printer" :status :good -:model "HP 915 Inkjet All-in-one Printer" +:model "HP Deskjet Ink Advantage 1518 All-in-one Printer" :status :good -:model "HP PSC 920 All-in-one Printer" +:model "HP Deskjet Ink Advantage 2130 All-in One Printer" :status :good -:model "HP PSC 950 All-in-one Printer" +:model "HP Deskjet Ink Advantage 2135 All-in One Printer" :status :good -:model "HP PSC 950vr All-in-one Printer" +:model "HP Deskjet Ink Advantage 2136 All-in One Printer" :status :good -:model "HP PSC 950xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 2138 All-in One Printer" :status :good -:model "HP LaserJet m1005 Multifunction Printer" +:model "HP Deskjet Ink Advantage 2200 All-in-one" :status :good -:model "HP Color LaserJet cm1015 Multifunction Printer" +:model "HP Deskjet Ink Advantage 2510 All-in-one" :status :good -:model "HP Color LaserJet cm1017 Multifunction Printer" +:model "HP Deskjet Ink Advantage 2515 All-in-one Printer" :status :good -:model "HP LaserJet 1100a Xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 2516 All-in-one Printer" :status :good -:model "HP LaserJet 1100xi Printer" +:model "HP Deskjet Ink Advantage 2520hc All-in-one" :status :good -:model "HP LaserJet 1100a All-in-one Printer" +:model "HP Deskjet Ink Advantage 2540 All-in-one Printer Series" :status :good -:model "HP LaserJet 1100 Printer" +:model "HP Deskjet Ink Advantage 2545 All-in-one Printer" :status :good -:model "HP LaserJet 1100a Se All-in-one Printer" +:model "HP Deskjet Ink Advantage 2546 All-in-one Printer" :status :good -:model "HP LaserJet 1100se Printer" +:model "HP Deskjet Ink Advantage 2548 All-in-one Printer" :status :good -:model "HP PSC 1110v All-in-one Printer" +:model "HP Deskjet Ink Advantage 2635 All-in-one" :status :good -:model "HP PSC 1110 All-in-one Printer" +:model "HP Deskjet Ink Advantage 2636 All-in-one" :status :good -:model "HP PSC 1118 All-in-one Printer" +:model "HP Deskjet Ink Advantage 2645 All-in-one Printer" :status :good -:model "HP LaserJet m1120 Multifunction Printer" +:model "HP Deskjet Ink Advantage 2646 All-in-one Printer" :status :good -:model "HP LaserJet m1120n Multifunction Printer" +:model "HP Deskjet Ink Advantage 2675 All-in-one" :status :good -:model "HP Officejet Pro 1150c All-in-one Printer" +:model "HP Deskjet Ink Advantage 2676 All-in-one" :status :good -:model "HP Officejet Pro 1150cse All-in-one Printer" +:model "HP Deskjet Ink Advantage 2677 All-in-one" :status :good -:model "HP Officejet Pro 1170cse All-in-one Printer" +:model "HP Deskjet Ink Advantage 2678 All-in-one" :status :good -:model "HP Officejet Pro 1170c All-in-one Printer" +:model "HP Deskjet Ink Advantage 3515 E-all-in-one" :status :good -:model "HP Officejet Pro 1170cxi All-in-one Printer" +:model "HP Deskjet Ink Advantage 3516 E-all-in-one" :status :good -:model "HP Officejet Pro 1175cxi All-in-one Printer" +:model "HP Deskjet Ink Advantage 3525 E-all-in-one" :status :good -:model "HP Officejet Pro 1175cse All-in-one Printer" +:model "HP Deskjet Ink Advantage 3540 E-all-in-one Printer Series" :status :good -:model "HP Officejet Pro 1175c All-in-one Printer" +:model "HP Deskjet Ink Advantage 3545 E-all-in-one Printer" :status :good -:model "HP PSC 1200 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3546 E-all-in-one Printer" :status :good -:model "HP PSC 1205 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3630 All-in-one Printer" :status :good -:model "HP PSC 1209 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3635 All-in-one Printer" :status :good -:model "HP PSC 1210xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 3636 All-in-one Printer" :status :good -:model "HP PSC 1210v All-in-one Printer" +:model "HP Deskjet Ink Advantage 3638 All-in-one Printer" :status :good -:model "HP PSC 1210 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3735 All-in-one" :status :good -:model "HP PSC 1213 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3789 All-in-one" :status :good -:model "HP PSC 1215 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3790 All-in-one" :status :good -:model "HP PSC 1216 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3830 All-in-one Printer" :status :good -:model "HP PSC 1217 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3835 All-in-one Printer" :status :good -:model "HP PSC 1218 All-in-one Printer" +:model "HP Deskjet Ink Advantage 3836 All-in-one Printer" :status :good -:model "HP PSC 1219 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4515 E-all-in-one Printer" :status :good -:model "HP LaserJet 1220 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4518 E-all-in-one Printer" :status :good -:model "HP LaserJet 1220se All-in-one Printer" +:model "HP Deskjet Ink Advantage 4530 All-in-one" :status :good -:model "HP PSC 1300 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4535 All-in-one" :status :good -:model "HP PSC 1310 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4536 All-in-one" :status :good -:model "HP PSC 1311 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4610 All-in-one Printer Series" :status :good -:model "HP Color LaserJet cm1312 Multifunction Printer" +:model "HP Deskjet Ink Advantage 4615 All-in-one Printer" :status :good -:model "HP Color LaserJet cm1312nfi Multifunction Printer" +:model "HP Deskjet Ink Advantage 4620 E-all-in-one Printer" :status :good -:model "HP PSC 1312 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4625 E-all-in-one Printer" :status :good -:model "HP PSC 1315v All-in-one Printer" +:model "HP Deskjet Ink Advantage 4640 E-all-in-one Printer Series" :status :good -:model "HP PSC 1315s All-in-one Printer" +:model "HP Deskjet Ink Advantage 4645 E-all-in-one Printer" :status :good -:model "HP PSC 1315xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 4646 E-all-in-one Printer" :status :good -:model "HP PSC 1315 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4648 E-all-in-one Printer" :status :good -:model "HP PSC 1317 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4670 All-in-one" :status :good -:model "HP PSC 1318 All-in-one Printer" +:model "HP Deskjet Ink Advantage 4675 All-in-one" :status :good -:model "HP LaserJet m1319f Multifunction Printer" +:model "HP Deskjet Ink Advantage 4676 All-in-one" :status :good -:model "HP PSC 1340 All-in-one Printer" +:model "HP Deskjet Ink Advantage 5075 All-in-one" :status :good -:model "HP PSC 1345 All-in-one Printer" +:model "HP Deskjet Ink Advantage 5275 All-in-one" :status :good -:model "HP PSC 1350xi All-in-one Printer" +:model "HP Deskjet Ink Advantage 5525 E-all-in-one" :status :good -:model "HP PSC 1350v All-in-one Printer" +:model "HP Deskjet Ink Advantage 5570 All-in-one" :status :good -:model "HP PSC 1350 All-in-one Printer" +:model "HP Deskjet Ink Advantage 5575 All-in-one" :status :good -:model "HP PSC 1355 All-in-one Printer" +:model "HP Deskjet Ink Advantage 5640 All-in-one Printer Series" :status :good -:model "HP PSC 1401 All-in-one Printer" +:model "HP Deskjet Ink Advantage 5645 All-in-one Printer" :status :good -:model "HP PSC 1402 All-in-one Printer" +:model "HP Deskjet Ink Advantage 6525 E-all-in-one" :status :good -:model "HP PSC 1403 All-in-one Printer" +:model "HP Deskjet Ink Advantage k209a All-in-one Printer" :status :good -:model "HP PSC 1406 All-in-one Printer" +:model "HP Deskjet Ink Advantage Ultra 2529 All-in-one Printer" :status :good -:model "HP PSC 1408 All-in-one Printer" +:model "HP Deskjet Ink Advantage Ultra 4720 All-in-one Printer Series" :status :good -:model "HP PSC 1410 All-in-one Printer" +:model "HP Deskjet Ink Advantage Ultra 4729 All-in-one Printer" :status :good -:model "HP PSC 1410v All-in-one Printer" +:model "HP Deskjet Ink Advantage Ultra 5738 All-in-one Printer" :status :good -:model "HP PSC 1410xi All-in-one Printer" +:model "HP Deskjet Ink Advantage Ultra 5739 All-in-one Printer" :status :good -:model "HP PSC 1415 All-in-one Printer" +:model "HP Digital Sender Flow 8500 fn2 Document Capture Workstation" :status :good -:model "HP PSC 1417 All-in-one Printer" +:model "HP Envy 100 d410 Series" :status :good -:model "HP PSC 1503 All-in-one Printer" +:model "HP Envy 110 E-all-in-one" :status :good -:model "HP PSC 1504 All-in-one Printer" +:model "HP Envy 111 E-all-in-one" :status :good -:model "HP PSC 1507 All-in-one Printer" +:model "HP Envy 114 E-all-in-one" :status :good -:model "HP PSC 1508 All-in-one Printer" +:model "HP Envy 120 E-all-in-one" :status :good -:model "HP PSC 1510s All-in-one Printer" +:model "HP Envy 121 E-all-in-one" :status :good -:model "HP PSC 1510xi All-in-one Printer" +:model "HP Envy 4500 E-all-in-one" :status :good -:model "HP PSC 1510 All-in-one Printer" +:model "HP Envy 4501 E-all-in-one" :status :good -:model "HP PSC 1510v All-in-one Printer" +:model "HP Envy 4502 E-all-in-one" :status :good -:model "HP PSC 1513s All-in-one Printer" +:model "HP Envy 4503 E-all-in-one" :status :good -:model "HP PSC 1513 All-in-one Printer" +:model "HP Envy 4504 E-all-in-one" :status :good -:model "HP PSC 1514 All-in-one Printer" +:model "HP Envy 4505 E-all-in-one" :status :good -:model "HP LaserJet m1522n Multifunction Printer" +:model "HP Envy 4507 E-all-in-one" :status :good -:model "HP LaserJet m1522nf Multifunction Printer" +:model "HP Envy 4508 E-all-in-one" :status :good -:model "HP LaserJet m1522 Multifunction Printer" +:model "HP Envy 4510 All-in-one" :status :good -:model "HP PSC 1600 All-in-one Printer" +:model "HP Envy 4512 All-in-one" :status :good -:model "HP PSC 1603 All-in-one Printer" +:model "HP Envy 4516 All-in-one" :status :good -:model "HP PSC 1605 All-in-one Printer" +:model "HP Envy 4520 All-in-one Printer" :status :good -:model "HP PSC 1608 All-in-one Printer" +:model "HP Envy 4520 All-in-one Printer Series" :status :good -:model "HP PSC 1610 All-in-one Printer" +:model "HP Envy 4522 All-in-one Printer" :status :good -:model "HP PSC 1610xi All-in-one Printer" +:model "HP Envy 4523 All-in-one Printer" :status :good -:model "HP PSC 1610v All-in-one Printer" +:model "HP Envy 4524 All-in-one Printer" :status :good -:model "HP PSC 1613 All-in-one Printer" +:model "HP Envy 5000 All-in-one" :status :good -:model "HP PSC 1615 All-in-one Printer" +:model "HP Envy 5020 All-in-one" :status :good -:model "HP PSC 2105 All-in-one Printer" +:model "HP Envy 5030 All-in-one" :status :good -:model "HP PSC 2108 All-in-one Printer" +:model "HP Envy 5032 All-in-one" :status :good -:model "HP Deskjet f2110 All-in-one Printer" +:model "HP Envy 5530 E-all-in-one Printer" :status :good -:model "HP PSC 2110 All-in-one Printer" +:model "HP Envy 5531 E-all-in-one Printer" :status :good -:model "HP PSC 2110v All-in-one Printer" +:model "HP Envy 5532 E-all-in-one Printer" :status :good -:model "HP PSC 2110xi All-in-one Printer" +:model "HP Envy 5534 E-all-in-one Printer" :status :good -:model "HP PSC 2115 All-in-one Printer" +:model "HP Envy 5535 E-all-in-one Printer" :status :good -:model "HP Deskjet f2120 All-in-one Printer" +:model "HP Envy 5536 E-all-in-one Printer" :status :good -:model "HP Deskjet f2128 All-in-one Printer" +:model "HP Envy 5539 E-all-in-one Printer" :status :good -:model "HP Deskjet f2140 All-in-one Printer" +:model "HP Envy 5540 All-in-one Printer" :status :good -:model "HP PSC 2150 All-in-one Printer" +:model "HP Envy 5540 All-in-one Printer Series" :status :good -:model "HP PSC 2170 All-in-one Printer" +:model "HP Envy 5542 E-all-in-one Printer" :status :good -:model "HP PSC 2171 All-in-one Printer" +:model "HP Envy 5543 All-in-one Printer" :status :good -:model "HP PSC 2175 All-in-one Printer" +:model "HP Envy 5544 All-in-one Printer" :status :good -:model "HP PSC 2175v All-in-one Printer" +:model "HP Envy 5545 E-all-in-one Printer" :status :good -:model "HP PSC 2175xi All-in-one Printer" +:model "HP Envy 5546 All-in-one Printer" :status :good -:model "HP Deskjet f2179 All-in-one Printer" +:model "HP Envy 5640 E-all-in-one" :status :good -:model "HP PSC 2179 All-in-one Printer" +:model "HP Envy 5642 E-all-in-one" :status :good -:model "HP Deskjet f2180 All-in-one Printer" +:model "HP Envy 5643 E-all-in-one" :status :good -:model "HP Deskjet f2185 All-in-one Printer" +:model "HP Envy 5644 E-all-in-one" :status :good -:model "HP Deskjet f2187 All-in-one Printer" +:model "HP Envy 5660 E-all-in-one" :status :good -:model "HP Deskjet f2188 All-in-one Printer" +:model "HP Envy 5665 E-all-in-one" :status :good -:model "HP PSC 2200 All-in-one Printer" +:model "HP Envy 7640 E-all-in-one" :status :good -:model "HP PSC 2210 All-in-one Printer" +:model "HP Envy 7645 E-all-in-one" :status :good -:model "HP PSC 2210v All-in-one Printer" +:model "HP Envy 8000 E-all-in-one" :status :good -:model "HP PSC 2210xi All-in-one Printer" +:model "HP Envy Photo 6200 All-in-one" :status :good -:model "HP Deskjet f2210 All-in-one Printer" +:model "HP Envy Photo 6220 All-in-one" :status :good -:model "HP Deskjet f2212 All-in-one Printer" +:model "HP Envy Photo 6230 All-in-one" :status :good -:model "HP Deskjet f2214 All-in-one Printer" +:model "HP Envy Photo 6232 All-in-one" :status :good -:model "HP Deskjet f2224 All-in-one Printer" +:model "HP Envy Photo 6234 All-in-one" :status :good -:model "HP Deskjet f2235 All-in-one Printer" +:model "HP Envy Photo 7100 All-in-one" :status :good -:model "HP Deskjet f2238 All-in-one Printer" +:model "HP Envy Photo 7120 All-in-one" :status :good -:model "HP Deskjet f2240 All-in-one Printer" +:model "HP Envy Photo 7130 All-in-one" :status :good -:model "HP Deskjet f2250 All-in-one Printer" +:model "HP Envy Photo 7134 All-in-one" :status :good -:model "HP Deskjet f2275 All-in-one Printer" +:model "HP Envy Photo 7155 All-in-one" :status :good -:model "HP Deskjet f2276 All-in-one Printer" +:model "HP Envy Photo 7164 All-in-one" :status :good -:model "HP Deskjet f2280 All-in-one Printer" +:model "HP Envy Photo 7800 All-in-one" :status :good -:model "HP Deskjet f2288 All-in-one Printer" +:model "HP Envy Photo 7820 All-in-one" :status :good -:model "HP Deskjet f2290 All-in-one Printer" +:model "HP Envy Photo 7830 All-in-one" :status :good -:model "HP PSC 2300 Series All-in-one Printer" +:model "HP Envy Photo 7855 All-in-one" :status :good -:model "HP PSC 2310 All-in-one Printer" +:model "HP Hotspot LaserJet Pro m1218nfs MFP" :status :good -:model "HP Color LaserJet cm2320n Multifunction Printer" +:model "HP Ink Tank 310" :status :good -:model "HP Color LaserJet cm2320nf Multifunction Printer" +:model "HP Ink Tank Wireless 410" :status :good -:model "HP Color LaserJet cm2320fxi Multifunction Printer" +:model "HP Laser Ns MFP 1005" :status :good -:model "HP Color LaserJet cm2320 Multifuntion Printer" +:model "HP Laser Ns MFP 1005w" :status :good -:model "HP PSC 2350 All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175" :status :good -:model "HP PSC 2352 All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175a" :status :good -:model "HP PSC 2353p All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175b" :status :good -:model "HP PSC 2353 All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175c" :status :good -:model "HP PSC 2355 All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175e" :status :good -:model "HP PSC 2355p All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175nw" :status :good -:model "HP PSC 2355xi All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175p" :status :good -:model "HP PSC 2355v All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175q" :status :good -:model "HP PSC 2357 All-in-one Printer" +:model "HP LaserJet 100 Color MFP m175r" :status :good -:model "HP PSC 2358 All-in-one Printer" +:model "HP LaserJet 1100 Printer" :status :good -:model "HP PSC 2405 Photosmart All-in-one Printer" +:model "HP LaserJet 1100a All-in-one Printer" :status :good -:model "HP PSC 2410v Photosmart All-in-one Printer" +:model "HP LaserJet 1100a Se All-in-one Printer" :status :good -:model "HP PSC 2410xi Photosmart All-in-one Printer" +:model "HP LaserJet 1100a Xi All-in-one Printer" :status :good -:model "HP Deskjet f2410 All-in-one Printer" +:model "HP LaserJet 1100se Printer" :status :good -:model "HP PSC 2410 Photosmart All-in-one Printer" +:model "HP LaserJet 1220 All-in-one Printer" :status :good -:model "HP Deskjet f2418 All-in-one Printer" +:model "HP LaserJet 1220se All-in-one Printer" :status :good -:model "HP Deskjet f2420 All-in-one Printer" +:model "HP LaserJet 200 Color MFP m275nw" :status :good -:model "HP PSC 2420 Photosmart All-in-one Printer" +:model "HP LaserJet 200 Color MFP m275s" :status :good -:model "HP Deskjet f2423 All-in-one Printer" +:model "HP LaserJet 200 Color MFP m275t" :status :good -:model "HP Deskjet f2430 All-in-one Printer" +:model "HP LaserJet 200 Color MFP m275u" :status :good -:model "HP Deskjet f2440 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276b" :status :good -:model "HP PSC 2450 Photosmart All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276e" :status :good -:model "HP Deskjet f2476 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276g" :status :good -:model "HP Deskjet f2480 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276j" :status :good -:model "HP Deskjet f2483 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276k" :status :good -:model "HP Deskjet f2488 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276p" :status :good -:model "HP Deskjet f2492 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276q" :status :good -:model "HP Deskjet f2493 All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276r" :status :good -:model "HP PSC 2500 Photosmart All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276u" :status :good -:model "HP PSC 2510 Photosmart All-in-one Printer" +:model "HP LaserJet 200 Colormfp m276v" :status :good -:model "HP PSC 2510xi Photosmart All-in-one Printer" +:model "HP LaserJet 300 Color MFP m375nw" :status :good -:model "HP PSC 2550 Photosmart All-in-one Printer" +:model "HP LaserJet 3015 All-in-one Printer" :status :good -:model "HP Photosmart 2570 All-in-one Printer" +:model "HP LaserJet 3020 All-in-one Printer" :status :good -:model "HP Photosmart 2571 All-in-one Printer" +:model "HP LaserJet 3030 All-in-one Printer" :status :good -:model "HP Photosmart 2573 All-in-one Printer" +:model "HP LaserJet 3050 All-in-one Printer" :status :good -:model "HP Photosmart 2574 All-in-one Printer" +:model "HP LaserJet 3050z All-in-one Printer" :status :good -:model "HP Photosmart 2575a All-in-one Printer" +:model "HP LaserJet 3052 All-in-one Printer" :status :good -:model "HP Photosmart 2575v All-in-one Printer" +:model "HP LaserJet 3055 All-in-one Printer" :status :good -:model "HP Photosmart 2575xi All-in-one Printer" +:model "HP LaserJet 3100 All-in-one Printer" :status :good -:model "HP Photosmart 2575 All-in-one Printer" +:model "HP LaserJet 3100se All-in-one Printer" :status :good -:model "HP Photosmart 2578 All-in-one Printer" +:model "HP LaserJet 3100xi All-in-one Printer" :status :good -:model "HP Photosmart 2605 All-in-one Printer" +:model "HP LaserJet 3150 All-in-one Printer" :status :good -:model "HP Photosmart 2608 All-in-one Printer" +:model "HP LaserJet 3150se All-in-one Printer" :status :good -:model "HP Photosmart 2610 All-in-one Printer" +:model "HP LaserJet 3150xi All-in-one Printer" :status :good -:model "HP Photosmart 2610v All-in-one Printer" +:model "HP LaserJet 3200 All-in-one Printer" :status :good -:model "HP Photosmart 2610xi All-in-one Printer" +:model "HP LaserJet 3200se All-in-one Printer" :status :good -:model "HP Photosmart 2613 All-in-one Printer" +:model "HP LaserJet 3300 Multifunction Printer" :status :good -:model "HP Photosmart 2615 All-in-one Printer" +:model "HP LaserJet 3310 Digital Printer Copier" :status :good -:model "HP Photosmart 2710 All-in-one Printer" +:model "HP LaserJet 3320 Multifunction Printer" :status :good -:model "HP Photosmart 2710xi All-in-one Printer" +:model "HP LaserJet 3320n Multifunction Printer" :status :good -:model "HP Photosmart 2713 All-in-one Printer" +:model "HP LaserJet 3330 Multifunction Printer" :status :good -:model "HP LaserJet m2727nf Multifunction Printer" +:model "HP LaserJet 3380 All-in-one Printer" :status :good -:model "HP LaserJet m2727 Multifunction Printer" +:model "HP LaserJet 3390 All-in-one Printer" :status :good -:model "HP LaserJet m2727nfs Multifunction Printer" +:model "HP LaserJet 3392 All-in-one Printer" :status :good -:model "HP Color LaserJet 2800 All-in-one Printer" +:model "HP LaserJet 400 Color MFP m475dn" :status :good -:model "HP Color LaserJet 2820 All-in-one Printer" +:model "HP LaserJet 400 Color MFP m475dw" :status :good -:model "HP Color LaserJet 2830 All-in-one Printer" +:model "HP LaserJet 400 MFP m425dn" :status :good -:model "HP Color LaserJet 2840 All-in-one Printer" +:model "HP LaserJet 400 MFP m425dw" :status :good -:model "HP LaserJet 3015 All-in-one Printer" +:model "HP LaserJet 4100 Multifunction Printer" :status :good -:model "HP LaserJet 3020 All-in-one Printer" +:model "HP LaserJet 4101 Multifunction Printer" :status :good -:model "HP LaserJet 3030 All-in-one Printer" +:model "HP LaserJet 4345 Multifunction Printer" +:status :good + +:model "HP LaserJet 4345x Multifunction Printer" +:status :good + +:model "HP LaserJet 4345xm Multifunction Printer" +:status :good + +:model "HP LaserJet 4345xs Multifunction Printer" +:status :good + +:model "HP LaserJet 8100 Multifunction Printer" +:status :good + +:model "HP LaserJet 8150 Multifunction Printer" +:status :good + +:model "HP LaserJet 9000 Multifunction Printer" +:status :good + +:model "HP LaserJet 9000l Multifunction Printer" +:status :good + +:model "HP LaserJet 9040 Multifunction Printer" +:status :good + +:model "HP LaserJet 9050 Multifunction Printer" +:status :good + +:model "HP LaserJet 9055 Multifunction Printer" +:status :good + +:model "HP LaserJet 9065 Multifunction Printer" +:status :good + +:model "HP LaserJet Enterprise Flow MFP m528c" +:status :good + +:model "HP LaserJet Enterprise Flow MFP m528z" +:status :good + +:model "HP LaserJet Enterprise Flow MFP m630h" +:status :good + +:model "HP LaserJet Enterprise Flow MFP m630z" +:status :good + +:model "HP LaserJet Enterprise MFP m528dn" +:status :good + +:model "HP LaserJet Enterprise MFP m528f" +:status :good + +:model "HP LaserJet Enterprise MFP m630dn" +:status :good + +:model "HP LaserJet Enterprise MFP m630f" +:status :good + +:model "HP LaserJet Enterprise MFP m630h" +:status :good + +:model "HP LaserJet m1005 Multifunction Printer" +:status :good + +:model "HP LaserJet m1120 Multifunction Printer" +:status :good + +:model "HP LaserJet m1120n Multifunction Printer" +:status :good + +:model "HP LaserJet m1210 MFP Series" +:status :good + +:model "HP LaserJet m1319f Multifunction Printer" +:status :good + +:model "HP LaserJet m1522 Multifunction Printer" +:status :good + +:model "HP LaserJet m1522n Multifunction Printer" +:status :good + +:model "HP LaserJet m1522nf Multifunction Printer" +:status :good + +:model "HP LaserJet m1536dnf MFP" +:status :good + +:model "HP LaserJet m1537dnf MFP" +:status :good + +:model "HP LaserJet m1538dnf MFP" +:status :good + +:model "HP LaserJet m1539dnf MFP" +:status :good + +:model "HP LaserJet m2727 Multifunction Printer" +:status :good + +:model "HP LaserJet m2727nf Multifunction Printer" +:status :good + +:model "HP LaserJet m2727nfs Multifunction Printer" :status :good :model "HP LaserJet m3035 Multifunction Printer" @@ -868,397 +1462,511 @@ :model "HP LaserJet m3035xs Multifunction Printer" :status :good -:model "HP LaserJet 3050z All-in-one Printer" +:model "HP LaserJet m4345 Multifunction Printer" :status :good -:model "HP LaserJet 3050 All-in-one Printer" +:model "HP LaserJet m4345x Multifunction Printer" :status :good -:model "HP LaserJet 3052 All-in-one Printer" +:model "HP LaserJet m4345xm Multifunction Printer" :status :good -:model "HP LaserJet 3055 All-in-one Printer" +:model "HP LaserJet m4345xs Multifunction Printer" :status :good -:model "HP LaserJet 3100xi All-in-one Printer" +:model "HP LaserJet m4349 MFP" :status :good -:model "HP LaserJet 3100se All-in-one Printer" +:model "HP LaserJet m4555 MFP" :status :good -:model "HP LaserJet 3100 All-in-one Printer" +:model "HP LaserJet m5035 Multifunction Printer" :status :good -:model "HP Photosmart 3108 All-in-one Printer" +:model "HP LaserJet m5035x Multifunction Printer" :status :good -:model "HP Photosmart 3110v All-in-one Printer" +:model "HP LaserJet m5035xs Multifunction Printer" :status :good -:model "HP Photosmart 3110 All-in-one Printer" +:model "HP LaserJet m5039 Multifunction Printer" :status :good -:model "HP Photosmart c3110 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e52645c" :status :good -:model "HP Photosmart c3125 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e62665h" :status :good -:model "HP Photosmart c3135 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e62665z" :status :good -:model "HP Photosmart c3140 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e62675z" :status :good -:model "HP LaserJet 3150se All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e72525z" :status :good -:model "HP Photosmart c3150 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e72530z" :status :good -:model "HP LaserJet 3150 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e72535z" :status :good -:model "HP LaserJet 3150xi All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e82540z" :status :good -:model "HP Photosmart c3170 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e82550z" :status :good -:model "HP Photosmart c3173 All-in-one Printer" +:model "HP LaserJet Managed Flow MFP e82560z" :status :good -:model "HP Photosmart c3175 All-in-one Printer" +:model "HP LaserJet Managed MFP e52645dn" :status :good -:model "HP Photosmart c3180 All-in-one Printer" +:model "HP LaserJet Managed MFP e62655dn" :status :good -:model "HP Photosmart c3183 All-in-one Printer" +:model "HP LaserJet Managed MFP e62665hs" :status :good -:model "HP Photosmart c3188 All-in-one Printer" +:model "HP LaserJet Managed MFP e72525dn" :status :good -:model "HP Photosmart c3190 All-in-one Printer" +:model "HP LaserJet Managed MFP e72530dn" :status :good -:model "HP Photosmart c3193 All-in-one Printer" +:model "HP LaserJet Managed MFP e72535dn" :status :good -:model "HP Photosmart c3194 All-in-one Printer" +:model "HP LaserJet Managed MFP e82540dn" :status :good -:model "HP LaserJet 3200 All-in-one Printer" +:model "HP LaserJet Managed MFP e82540du" :status :good -:model "HP LaserJet 3200m All-in-one Printer" +:model "HP LaserJet Managed MFP e82550dn" :status :good -:model "HP Photosmart 3207 All-in-one Printer" +:model "HP LaserJet Managed MFP e82550du" :status :good -:model "HP Photosmart 3210a All-in-one Printer" +:model "HP LaserJet Managed MFP e82560dn" :status :good -:model "HP Photosmart 3210v All-in-one Printer" +:model "HP LaserJet Managed MFP e82560du" :status :good -:model "HP Photosmart 3210xi All-in-one Printer" +:model "HP LaserJet MFP e72425a" :status :good -:model "HP Photosmart 3210 All-in-one Printer" +:model "HP LaserJet MFP e72425dn" :status :good -:model "HP Photosmart 3213 All-in-one Printer" +:model "HP LaserJet MFP e72425dv" :status :good -:model "HP Photosmart 3214 All-in-one Printer" +:model "HP LaserJet MFP e72430dn" :status :good -:model "HP LaserJet 3300 Multifunction Printer" +:model "HP LaserJet Pro 200 Color MFP m276n" :status :good -:model "HP Photosmart 3308 All-in-one Printer" +:model "HP LaserJet Pro 200 Color MFP m276nw" :status :good -:model "HP Photosmart 3310 All-in-one Printer" +:model "HP LaserJet Pro 500 Color MFP m570dn" :status :good -:model "HP Photosmart 3310xi All-in-one Printer" +:model "HP LaserJet Pro 500 Color MFP m570dw" :status :good -:model "HP LaserJet 3310 Digital Printer Copier" +:model "HP LaserJet Pro m521dn Multifunction Printer" :status :good -:model "HP Photosmart 3313 All-in-one Printer" +:model "HP LaserJet Pro m521dw Multifunction Printer" :status :good -:model "HP Photosmart 3314 All-in-one Printer" +:model "HP LaserJet Pro MFP m125a" :status :good -:model "HP LaserJet 3320n Multifunction Printer" +:model "HP LaserJet Pro MFP m125nr" :status :good -:model "HP LaserJet 3320 Multifunction Printer" +:model "HP LaserJet Pro MFP m125nw" :status :good -:model "HP LaserJet 3330 Multifunction Printer" +:model "HP LaserJet Pro MFP m125r" :status :good -:model "HP LaserJet 3380 All-in-one Printer" +:model "HP LaserJet Pro MFP m125rnw" :status :good -:model "HP LaserJet 3390 All-in-one Printer" +:model "HP LaserJet Pro MFP m125s" :status :good -:model "HP LaserJet 3392 All-in-one Printer" +:model "HP LaserJet Pro MFP m126a" :status :good -:model "HP Officejet j3608 All-in-one Printer" +:model "HP LaserJet Pro MFP m126nw" :status :good -:model "HP Officejet j3625 All-in-one Printer" +:model "HP LaserJet Pro MFP m127fn" :status :good -:model "HP Officejet j3635 All-in-one Printer" +:model "HP LaserJet Pro MFP m127fp" :status :good -:model "HP Officejet j3640 All-in-one Printer" +:model "HP LaserJet Pro MFP m127fs" :status :good -:model "HP Officejet j3650 All-in-one Printer" +:model "HP LaserJet Pro MFP m127fw" :status :good -:model "HP Officejet j3680 All-in-one Printer" +:model "HP LaserJet Pro MFP m128fn" :status :good -:model "HP Officejet 4100 Series All-in-one Printer" +:model "HP LaserJet Pro MFP m128fp" :status :good -:model "HP LaserJet 4100 Multifunction Printer" +:model "HP LaserJet Pro MFP m128fw" :status :good -:model "HP LaserJet 4101 Multifunction Printer" +:model "HP LaserJet Pro MFP m130a" :status :good -:model "HP Officejet 4105 All-in-one Printer" +:model "HP LaserJet Pro MFP m130fn" :status :good -:model "HP Officejet 4110xi All-in-one Printer" +:model "HP LaserJet Pro MFP m130fw" :status :good -:model "HP Photosmart c4110 All-in-one Printer" +:model "HP LaserJet Pro MFP m130nw" :status :good -:model "HP Officejet 4110v All-in-one Printer" +:model "HP LaserJet Pro MFP m132a" :status :good -:model "HP Officejet 4110 All-in-one Printer" +:model "HP LaserJet Pro MFP m132fn" :status :good -:model "HP Officejet 4115 All-in-one Printer" +:model "HP LaserJet Pro MFP m132fp" :status :good -:model "HP Deskjet f4135 All-in-one Printer" +:model "HP LaserJet Pro MFP m132fw" :status :good -:model "HP Photosmart c4140 All-in-one Printer" +:model "HP LaserJet Pro MFP m132nw" :status :good -:model "HP Deskjet f4140 All-in-one Printer" +:model "HP LaserJet Pro MFP m132snw" :status :good -:model "HP Deskjet f4150 All-in-one Printer" +:model "HP LaserJet Pro MFP m134a" :status :good -:model "HP Photosmart c4150 All-in-one Printer" +:model "HP LaserJet Pro MFP m134fn" :status :good -:model "HP Photosmart c4170 All-in-one Printer" +:model "HP LaserJet Pro MFP m148dw" :status :good -:model "HP Deskjet f4172 All-in-one Printer" +:model "HP LaserJet Pro MFP m148fdw" :status :good -:model "HP Photosmart c4173 All-in-one Printer" +:model "HP LaserJet Pro MFP m149dw" :status :good -:model "HP Deskjet f4175 All-in-one Printer" +:model "HP LaserJet Pro MFP m149fdw" :status :good -:model "HP Photosmart c4175 All-in-one Printer" +:model "HP LaserJet Pro MFP m225dn" :status :good -:model "HP Deskjet f4180 All-in-one Printer" +:model "HP LaserJet Pro MFP m225dw" :status :good -:model "HP Photosmart c4180 All-in-one Printer" +:model "HP LaserJet Pro MFP m225rdn" :status :good -:model "HP Photosmart c4183 All-in-one Printer" +:model "HP LaserJet Pro MFP m226dn" :status :good -:model "HP Deskjet f4185 All-in-one Printer" +:model "HP LaserJet Pro MFP m226dw" :status :good -:model "HP Photosmart c4188 All-in-one Printer" +:model "HP LaserJet Pro MFP m227d" :status :good -:model "HP Deskjet f4188 All-in-one Printer" +:model "HP LaserJet Pro MFP m227fdn" :status :good -:model "HP Deskjet f4190 All-in-one Printer" +:model "HP LaserJet Pro MFP m227fdw" :status :good -:model "HP Photosmart c4190 All-in-one Printer" +:model "HP LaserJet Pro MFP m227sdn" :status :good -:model "HP Photosmart c4193 All-in-one Printer" +:model "HP LaserJet Pro MFP m25a" :status :good -:model "HP Deskjet f4194 All-in-one Printer" +:model "HP LaserJet Pro MFP m25nw" :status :good -:model "HP Photosmart c4194 All-in-one Printer" +:model "HP LaserJet Pro MFP m26a" :status :good -:model "HP Officejet 4200 All-in-one Printer" +:model "HP LaserJet Pro MFP m26nw" :status :good -:model "HP Photosmart c4205 All-in-one Printer" +:model "HP LaserJet Pro MFP m27c" :status :good -:model "HP Photosmart c4210 All-in-one Printer" +:model "HP LaserJet Pro MFP m27cnw" :status :good -:model "HP Deskjet f4210 All-in-one Printer" +:model "HP LaserJet Pro MFP m28a" :status :good -:model "HP Officejet 4211 All-in-one Printer" +:model "HP LaserJet Pro MFP m29a" :status :good -:model "HP Officejet 4212 All-in-one Printer" +:model "HP LaserJet Pro MFP m30a" :status :good -:model "HP Deskjet f4213 All-in-one Printer" +:model "HP LaserJet Pro MFP m30c" :status :good -:model "HP Officejet 4215 All-in-one Printer" +:model "HP LaserJet Pro MFP m31a" :status :good -:model "HP Officejet 4215v All-in-one Printer" +:model "HP LaserJet Pro MFP m31c" :status :good -:model "HP Officejet 4215xi All-in-one Printer" +:model "HP LaserJet Pro MFP m329dn" :status :good -:model "HP Officejet 4219 All-in-one Printer" +:model "HP LaserJet Pro MFP m329dw" :status :good -:model "HP Deskjet f4224 All-in-one Printer" +:model "HP LaserJet Pro MFP m426dw" :status :good -:model "HP Deskjet f4230 All-in-one Printer" +:model "HP LaserJet Pro MFP m426fdn" :status :good -:model "HP Deskjet f4235 All-in-one Printer" +:model "HP LaserJet Pro MFP m426fdw" :status :good -:model "HP Photosmart c4235 All-in-one Printer" +:model "HP LaserJet Pro MFP m427dn" :status :good -:model "HP Deskjet f4238 All-in-one Printer" +:model "HP LaserJet Pro MFP m427dw" :status :good -:model "HP Deskjet f4240 All-in-one Printer" +:model "HP LaserJet Pro MFP m427fdw" :status :good -:model "HP Photosmart c4240 All-in-one Printer" +:model "HP LaserJet Pro MFP m428c1" :status :good -:model "HP Photosmart c4250 All-in-one Printer" +:model "HP LaserJet Pro MFP m428c2" :status :good -:model "HP Deskjet f4250 All-in-one Printer" +:model "HP LaserJet Pro MFP m428c3" :status :good -:model "HP Officejet 4251 All-in-one Printer" +:model "HP LaserJet Pro MFP m428c4" :status :good -:model "HP Officejet 4252 All-in-one Printer" +:model "HP LaserJet Pro MFP m428dw" :status :good -:model "HP Officejet 4255 All-in-one Printer" +:model "HP LaserJet Pro MFP m428fdn" :status :good -:model "HP Officejet 4256 All-in-one Printer" +:model "HP LaserJet Pro MFP m428fdw" :status :good -:model "HP Officejet 4259 All-in-one Printer" +:model "HP LaserJet Pro MFP m428m" :status :good -:model "HP Photosmart c4270 All-in-one Printer" +:model "HP LaserJet Pro MFP m429dw" :status :good -:model "HP Deskjet f4272 All-in-one Printer" +:model "HP LaserJet Pro MFP m429fdn" :status :good -:model "HP Photosmart c4272 All-in-one Printer" +:model "HP LaserJet Pro MFP m429fdw" :status :good -:model "HP Deskjet f4273 All-in-one Printer" +:model "HP LaserJet Pro MFP m435nw" :status :good -:model "HP Photosmart c4273 All-in-one Printer" +:model "HP LaserJet Professional cm1411fn" :status :good -:model "HP Deskjet f4274 All-in-one Printer" +:model "HP LaserJet Professional cm1412fn" :status :good -:model "HP Photosmart c4275 All-in-one Printer" +:model "HP LaserJet Professional cm1413fn" :status :good -:model "HP Deskjet f4275 All-in-one Printer" +:model "HP LaserJet Professional cm1415fn" :status :good -:model "HP Deskjet f4280 All-in-one" +:model "HP LaserJet Professional cm1415fnw" :status :good -:model "HP Photosmart c4280 All-in-one Printer" +:model "HP LaserJet Professional cm1416fnw" :status :good -:model "HP Deskjet f4280 All-in-one Printer" +:model "HP LaserJet Professional cm1417fnw" :status :good -:model "HP Photosmart c4283 All-in-one Printer" +:model "HP LaserJet Professional cm1418fnw" :status :good -:model "HP Deskjet f4283 All-in-one Printer" +:model "HP LaserJet Professional m1132 Multifunction Printer" :status :good -:model "HP Photosmart c4285 All-in-one Printer" +:model "HP LaserJet Professional m1132s Multifunction Printer" :status :good -:model "HP Photosmart c4288 All-in-one Printer" +:model "HP LaserJet Professional m1136 Multifunction Printer" :status :good -:model "HP Deskjet f4288 All-in-one Printer" +:model "HP LaserJet Professional m1137 Multifunction Printer" :status :good -:model "HP Deskjet f4292 All-in-one Printer" +:model "HP LaserJet Professional m1138 Multifunction Printer" :status :good -:model "HP Deskjet f4293 All-in-one Printer" +:model "HP LaserJet Professional m1139 Multifunction Printer" :status :good -:model "HP Photosmart c4293 All-in-one Printer" +:model "HP LaserJet Professional m1212nf Multifunction Printer" :status :good -:model "HP Deskjet f4294 All-in-one Printer" +:model "HP LaserJet Professional m1213nf Multifunction Printer" :status :good -:model "HP Photosmart c4294 All-in-one Printer" +:model "HP LaserJet Professional m1214nfh Multifunction Printer" +:status :good + +:model "HP LaserJet Professional m1216nfh MFP" +:status :good + +:model "HP LaserJet Professional m1217nfw Multifunction Printer" +:status :good + +:model "HP LaserJet Professional m1219nf MFP" +:status :good + +:model "HP LaserJet Professional m1219nfg MFP" +:status :good + +:model "HP LaserJet Professional m1219nfs MFP" +:status :good + +:model "HP LaserJet Ultra MFP m230sdn" +:status :good + +:model "HP Neverstop Laser MFP 1200a" +:status :good + +:model "HP Neverstop Laser MFP 1200w" +:status :good + +:model "HP Officejet 150 Mobile All-in-one" +:status :good + +:model "HP Officejet 250 Mobile All-in-one" +:status :good + +:model "HP Officejet 250c Mobile All-in-one" +:status :good + +:model "HP Officejet 252 Mobile All-in-one" +:status :good + +:model "HP Officejet 252c Mobile All-in-one" +:status :good + +:model "HP Officejet 258 Mobile All-in-one" +:status :good + +:model "HP Officejet 2620 All-in-one" +:status :good + +:model "HP Officejet 2621 All-in-one" +:status :good + +:model "HP Officejet 2622 All-in-one" +:status :good + +:model "HP Officejet 3830 All-in-one Printer" +:status :good + +:model "HP Officejet 3832 All-in-one Printer" +:status :good + +:model "HP Officejet 3834 All-in-one Printer" +:status :good + +:model "HP Officejet 4100 Series All-in-one Printer" +:status :good + +:model "HP Officejet 4105 All-in-one Printer" +:status :good + +:model "HP Officejet 4110 All-in-one Printer" +:status :good + +:model "HP Officejet 4110v All-in-one Printer" +:status :good + +:model "HP Officejet 4110xi All-in-one Printer" +:status :good + +:model "HP Officejet 4115 All-in-one Printer" +:status :good + +:model "HP Officejet 4200 All-in-one Printer" +:status :good + +:model "HP Officejet 4211 All-in-one Printer" +:status :good + +:model "HP Officejet 4212 All-in-one Printer" +:status :good + +:model "HP Officejet 4215 All-in-one Printer" +:status :good + +:model "HP Officejet 4215v All-in-one Printer" +:status :good + +:model "HP Officejet 4215xi All-in-one Printer" +:status :good + +:model "HP Officejet 4219 All-in-one Printer" +:status :good + +:model "HP Officejet 4251 All-in-one Printer" +:status :good + +:model "HP Officejet 4252 All-in-one Printer" +:status :good + +:model "HP Officejet 4255 All-in-one Printer" +:status :good + +:model "HP Officejet 4256 All-in-one Printer" +:status :good + +:model "HP Officejet 4259 All-in-one Printer" :status :good :model "HP Officejet 4308 All-in-one Printer" @@ -1276,10 +1984,10 @@ :model "HP Officejet 4315 All-in-one Printer" :status :good -:model "HP Officejet 4315xi All-in-one Printer" +:model "HP Officejet 4315v All-in-one Printer" :status :good -:model "HP Officejet 4315v All-in-one Printer" +:model "HP Officejet 4315xi All-in-one Printer" :status :good :model "HP Officejet 4317 All-in-one Printer" @@ -1291,163 +1999,484 @@ :model "HP Officejet 4338 All-in-one Printer" :status :good -:model "HP Photosmart c4340 All-in-one Printer" +:model "HP Officejet 4352 All-in-one Printer" :status :good -:model "HP Photosmart c4342 All-in-one Printer" +:model "HP Officejet 4353 All-in-one Printer" :status :good -:model "HP Photosmart c4343 All-in-one Printer" +:model "HP Officejet 4355 All-in-one Printer" :status :good -:model "HP Photosmart c4344 All-in-one Printer" +:model "HP Officejet 4357 All-in-one Printer" :status :good -:model "HP LaserJet m4345 Multifunction Printer" +:model "HP Officejet 4359 All-in-one Printer" :status :good -:model "HP LaserJet 4345xm Multifunction Printer" +:model "HP Officejet 4400 k410 All-in-one Printer" :status :good -:model "HP LaserJet 4345 Multifunction Printer" +:model "HP Officejet 4500 All-in-one Desktop Printer - g510b" :status :good -:model "HP LaserJet m4345x Multifunction Printer" +:model "HP Officejet 4500 All-in-one Printer - g510g" :status :good -:model "HP LaserJet m4345xs Multifunction Printer" +:model "HP Officejet 4500 All-in-one Printer - g510h" :status :good -:model "HP LaserJet 4345xs Multifunction Printer" +:model "HP Officejet 4500 All-in-one Printer - k710" :status :good -:model "HP LaserJet 4345x Multifunction Printer" +:model "HP Officejet 4500 Desktop All-in-one Printer - g510a" :status :good -:model "HP Photosmart c4345 All-in-one Printer" +:model "HP Officejet 4500 g510n-z All-in-one Printer" :status :good -:model "HP LaserJet m4345xm Multifunction Printer" +:model "HP Officejet 4610 All-in-one Printer Series" :status :good -:model "HP Photosmart c4348 All-in-one Printer" +:model "HP Officejet 4620 E-all-in-one Printer" :status :good -:model "HP LaserJet m4349 MFP" +:model "HP Officejet 4622 E-all-in-one Printer" :status :good -:model "HP Officejet 4352 All-in-one Printer" +:model "HP Officejet 4630 E-all-in-one Printer" :status :good -:model "HP Officejet 4353 All-in-one Printer" +:model "HP Officejet 4631 E-all-in-one Printer" :status :good -:model "HP Officejet 4355 All-in-one Printer" +:model "HP Officejet 4632 E-all-in-one Printer" :status :good -:model "HP Officejet 4357 All-in-one Printer" +:model "HP Officejet 4634 E-all-in-one Printer" :status :good -:model "HP Officejet 4359 All-in-one Printer" +:model "HP Officejet 4635 E-all-in-one Printer" :status :good -:model "HP Photosmart c4380 All-in-one Printer" +:model "HP Officejet 4636 E-all-in-one Printer" :status :good -:model "HP Photosmart c4383 All-in-one Printer" +:model "HP Officejet 4650 All-in-one Printer" :status :good -:model "HP Photosmart c4384 All-in-one Printer" +:model "HP Officejet 4650 All-in-one Printer Series" :status :good -:model "HP Photosmart c4385 All-in-one Printer" +:model "HP Officejet 4652 All-in-one Printer" :status :good -:model "HP Photosmart c4388 All-in-one Printer" +:model "HP Officejet 4654 All-in-one Printer" :status :good -:model "HP Photosmart c4410 All-in-one Printer" +:model "HP Officejet 4655 All-in-one Printer" :status :good -:model "HP Photosmart c4424 All-in-one Printer" +:model "HP Officejet 5100 All-in-one Printer" :status :good -:model "HP Deskjet f4435 All-in-one Printer" +:model "HP Officejet 5105 All-in-one Printer" :status :good -:model "HP Photosmart c4435 All-in-one Printer" +:model "HP Officejet 5110 All-in-one Printer" :status :good -:model "HP Photosmart c4440 All-in-one Printer" +:model "HP Officejet 5110v All-in-one Printer" :status :good -:model "HP Deskjet f4440 All-in-one Printer" +:model "HP Officejet 5110xi All-in-one Printer" :status :good -:model "HP Photosmart c4450 All-in-one Printer" +:model "HP Officejet 520 All-in-one Printer" :status :good -:model "HP Deskjet f4450 All-in-one Printer" +:model "HP Officejet 5200 All-in-one" :status :good -:model "HP Deskjet f4470 All-in-one Printer" +:model "HP Officejet 5220 All-in-one" :status :good -:model "HP Photosmart c4470 All-in-one Printer" +:model "HP Officejet 5230 All-in-one" :status :good -:model "HP Photosmart c4472 All-in-one Printer" +:model "HP Officejet 5232 All-in-one" :status :good -:model "HP Deskjet f4472 All-in-one Printer" +:model "HP Officejet 5505 All-in-one Printer" :status :good -:model "HP Photosmart c4473 All-in-one Printer" +:model "HP Officejet 5508 All-in-one Printer" :status :good -:model "HP Deskjet f4473 All-in-one Printer" +:model "HP Officejet 5510 All-in-one Printer" :status :good -:model "HP Deskjet f4480 All-in-one Printer" +:model "HP Officejet 5510v All-in-one Printer" :status :good -:model "HP Photosmart c4480 All-in-one Printer" +:model "HP Officejet 5510xi All-in-one Printer" :status :good -:model "HP Photosmart c4483 All-in-one Printer" +:model "HP Officejet 5515 All-in-one Printer" :status :good -:model "HP Deskjet f4483 All-in-one Printer" +:model "HP Officejet 5600 Series All-in-one Printer" :status :good -:model "HP Photosmart c4485 All-in-one Printer" +:model "HP Officejet 5605 All-in-one Printer" :status :good -:model "HP Photosmart c4486 All-in-one Printer" +:model "HP Officejet 5607 All-in-one Printer" :status :good -:model "HP Photosmart c4488 All-in-one Printer" +:model "HP Officejet 5608 All-in-one Printer" :status :good -:model "HP Deskjet f4488 All-in-one Printer" +:model "HP Officejet 5609 All-in-one Printer" :status :good -:model "HP Photosmart c4490 All-in-one Printer" +:model "HP Officejet 5610 All-in-one Printer" :status :good -:model "HP Deskjet f4492 All-in-one Printer" +:model "HP Officejet 5610v All-in-one Printer" :status :good -:model "HP Photosmart c4493 All-in-one Printer" +:model "HP Officejet 5610xi All-in-one Printer" :status :good -:model "HP Photosmart c4494 All-in-one Printer" +:model "HP Officejet 5615 All-in-one Printer" :status :good -:model "HP Deskjet f4500 All-in-one Printer Series" +:model "HP Officejet 5679 All-in-one Printer" :status :good -:model "HP Designjet 4520mfp" +:model "HP Officejet 5680 All-in-one Printer" +:status :good + +:model "HP Officejet 570 All-in-one Printer" +:status :good + +:model "HP Officejet 5740 E-all-in-one" +:status :good + +:model "HP Officejet 5742 E-all-in-one" +:status :good + +:model "HP Officejet 5744 E-all-in-one" +:status :good + +:model "HP Officejet 5745 E-all-in-one" +:status :good + +:model "HP Officejet 580 All-in-one Printer" +:status :good + +:model "HP Officejet 590 All-in-one Printer" +:status :good + +:model "HP Officejet 600 All-in-one Printer" +:status :good + +:model "HP Officejet 610 All-in-one Printer" +:status :good + +:model "HP Officejet 6105 All-in-one Printer" +:status :good + +:model "HP Officejet 6110 All-in-one Printer" +:status :good + +:model "HP Officejet 6110v All-in-one Printer" +:status :good + +:model "HP Officejet 6110xi All-in-one Printer" +:status :good + +:model "HP Officejet 6150 All-in-one Printer" +:status :good + +:model "HP Officejet 6200 All-in-one Printer" +:status :good + +:model "HP Officejet 6203 All-in-one Printer" +:status :good + +:model "HP Officejet 6205 All-in-one Printer" +:status :good + +:model "HP Officejet 6208 All-in-one Printer" +:status :good + +:model "HP Officejet 6210 All-in-one Printer" +:status :good + +:model "HP Officejet 6210v All-in-one Printer" +:status :good + +:model "HP Officejet 6210xi All-in-one Printer" +:status :good + +:model "HP Officejet 6213 All-in-one Printer" +:status :good + +:model "HP Officejet 6215 All-in-one Printer" +:status :good + +:model "HP Officejet 630 All-in-one Printer" +:status :good + +:model "HP Officejet 6301 All-in-one Printer" +:status :good + +:model "HP Officejet 6304 All-in-one Printer" +:status :good + +:model "HP Officejet 6305 All-in-one Printer" +:status :good + +:model "HP Officejet 6307 All-in-one Printer" +:status :good + +:model "HP Officejet 6308 All-in-one Printer" +:status :good + +:model "HP Officejet 6310 All-in-one Printer" +:status :good + +:model "HP Officejet 6310v All-in-one Printer" +:status :good + +:model "HP Officejet 6310xi All-in-one Printer" +:status :good + +:model "HP Officejet 6313 All-in-one Printer" +:status :good + +:model "HP Officejet 6315 All-in-one Printer" +:status :good + +:model "HP Officejet 6318 All-in-one Printer" +:status :good + +:model "HP Officejet 635 All-in-one Printer" +:status :good + +:model "HP Officejet 6500 All-in-one Printer - e709a" +:status :good + +:model "HP Officejet 6500 All-in-one Printer - e709c" +:status :good + +:model "HP Officejet 6500 e710" +:status :good + +:model "HP Officejet 6500 e710n-z" +:status :good + +:model "HP Officejet 6500 Wireless All-in-one Printer - e709n" +:status :good + +:model "HP Officejet 6500 Wireless All-in-one Printer - e709q" +:status :good + +:model "HP Officejet 6600 E-all-in-one Printer - h711a" +:status :good + +:model "HP Officejet 6700 Premium E-all-in-one printer-h711n" +:status :good + +:model "HP Officejet 6800 E-all-in-one" +:status :good + +:model "HP Officejet 6810 E-all-in-one Printer Series" +:status :good + +:model "HP Officejet 6812 E-all-in-one Printer" +:status :good + +:model "HP Officejet 6815 E-all-in-one Printer" +:status :good + +:model "HP Officejet 6820 E-all-in-one Printer" +:status :good + +:model "HP Officejet 6950 All-in-one" +:status :good + +:model "HP Officejet 6960 All-in-one" +:status :good + +:model "HP Officejet 700 All-in-one Printer" +:status :good + +:model "HP Officejet 710 All-in-one Printer" +:status :good + +:model "HP Officejet 7100 All-in-one Printer" +:status :good + +:model "HP Officejet 7110 All-in-one Printer" +:status :good + +:model "HP Officejet 7110xi All-in-one Printer" +:status :good + +:model "HP Officejet 7115 All-in-one Printer" +:status :good + +:model "HP Officejet 7130 All-in-one Printer" +:status :good + +:model "HP Officejet 7130xi All-in-one Printer" +:status :good + +:model "HP Officejet 7135xi All-in-one Printer" +:status :good + +:model "HP Officejet 7140xi All-in-one Printer" +:status :good + +:model "HP Officejet 720 All-in-one Printer" +:status :good + +:model "HP Officejet 7205 All-in-one Printer" +:status :good + +:model "HP Officejet 7208 All-in-one Printer" +:status :good + +:model "HP Officejet 7210 All-in-one Printer" +:status :good + +:model "HP Officejet 7210v All-in-one Printer" +:status :good + +:model "HP Officejet 7210xi All-in-one Printer" +:status :good + +:model "HP Officejet 7213 All-in-one Printer" +:status :good + +:model "HP Officejet 7215 All-in-one Printer" +:status :good + +:model "HP Officejet 725 All-in-one Printer" +:status :good + +:model "HP Officejet 7310 All-in-one Printer" +:status :good + +:model "HP Officejet 7310xi All-in-one Printer" +:status :good + +:model "HP Officejet 7313 All-in-one Printer" +:status :good + +:model "HP Officejet 7408 All-in-one Printer" +:status :good + +:model "HP Officejet 7410 All-in-one Printer" +:status :good + +:model "HP Officejet 7410xi All-in-one Printer" +:status :good + +:model "HP Officejet 7413 All-in-one Printer" +:status :good + +:model "HP Officejet 7500 e910" +:status :good + +:model "HP Officejet 7510 Wide Format E-all-in-one Printer" +:status :good + +:model "HP Officejet 7610 Wide Format E-all-in-one Printer" +:status :good + +:model "HP Officejet 7612 Wide Format E-all-in-one Printer" +:status :good + +:model "HP Officejet 8010 All-in-one Printer Series" +:status :good + +:model "HP Officejet 8020 All-in-one Printer Series" +:status :good + +:model "HP Officejet 8040 E-all-in-one" +:status :good + +:model "HP Officejet 8702 All-in-one" +:status :good + +:model "HP Officejet 9110 All-in-one Printer" +:status :good + +:model "HP Officejet 9120 All-in-one Printer" +:status :good + +:model "HP Officejet 9130 All-in-one Printer" +:status :good + +:model "HP Officejet All-in-one 9010" +:status :good + +:model "HP Officejet d125xi All-in-one Printer" +:status :good + +:model "HP Officejet d135 All-in-one Printer" +:status :good + +:model "HP Officejet d135xi All-in-one Printer" +:status :good + +:model "HP Officejet d145 All-in-one Printer" +:status :good + +:model "HP Officejet d145xi All-in-one Printer" +:status :good + +:model "HP Officejet d155xi All-in-one Printer" +:status :good + +:model "HP Officejet g55 All-in-one Printer" +:status :good + +:model "HP Officejet g55xi All-in-one Printer" +:status :good + +:model "HP Officejet g85 All-in-one Printer" +:status :good + +:model "HP Officejet g85xi All-in-one Printer" +:status :good + +:model "HP Officejet g95 All-in-one Printer" +:status :good + +:model "HP Officejet j3508 All-in-one Printer" +:status :good + +:model "HP Officejet j3608 All-in-one Printer" +:status :good + +:model "HP Officejet j3625 All-in-one Printer" +:status :good + +:model "HP Officejet j3635 All-in-one Printer" +:status :good + +:model "HP Officejet j3640 All-in-one Printer" +:status :good + +:model "HP Officejet j3650 All-in-one Printer" +:status :good + +:model "HP Officejet j3680 All-in-one Printer" :status :good :model "HP Officejet j4524 All-in-one Printer" @@ -1459,172 +2488,850 @@ :model "HP Officejet j4535 All-in-one Printer" :status :good -:model "HP Photosmart c4540 All-in-one Printer" +:model "HP Officejet j4540 All-in-one Printer" :status :good -:model "HP Officejet j4540 All-in-one Printer" +:model "HP Officejet j4550 All-in-one Printer" :status :good -:model "HP Photosmart c4550 All-in-one Printer" +:model "HP Officejet j4560 All-in-one Printer" :status :good -:model "HP Officejet j4550 All-in-one Printer" +:model "HP Officejet j4580 All-in-one Printer" :status :good -:model "HP Officejet j4560 All-in-one Printer" +:model "HP Officejet j4580c All-in-one Printer" :status :good -:model "HP Photosmart c4570 All-in-one Printer" +:model "HP Officejet j4585 All-in-one Printer" :status :good -:model "HP Photosmart c4572 All-in-one Printer" +:model "HP Officejet j4660 All-in-one Printer" :status :good -:model "HP Photosmart c4573 All-in-one Printer" +:model "HP Officejet j4680 All-in-one Printer" :status :good -:model "HP Photosmart c4575 All-in-one Printer" +:model "HP Officejet j4680c All-in-one Printer" :status :good -:model "HP Officejet j4580c All-in-one Printer" +:model "HP Officejet j5505 All-in-one Printer" :status :good -:model "HP Photosmart c4580 All-in-one Printer" +:model "HP Officejet j5508 All-in-one Printer" :status :good -:model "HP Officejet j4580 All-in-one Printer" +:model "HP Officejet j5510 All-in-one Printer" :status :good -:model "HP Photosmart c4583 All-in-one Printer" +:model "HP Officejet j5510v All-in-one Printer" :status :good -:model "HP Photosmart c4585 All-in-one Printer" +:model "HP Officejet j5510xi All-in-one Printer" :status :good -:model "HP Officejet j4585 All-in-one Printer" +:model "HP Officejet j5515 All-in-one Printer" :status :good -:model "HP Photosmart c4588 All-in-one Printer" +:model "HP Officejet j5520 All-in-one Printer" :status :good -:model "HP Photosmart c4593 All-in-one Printer" +:model "HP Officejet j5725 All-in-one Printer" :status :good -:model "HP Photosmart c4599 All-in-one Printer" +:model "HP Officejet j5730 All-in-one Printer" :status :good -:model "HP Photosmart c4610 All-in-one Printer" +:model "HP Officejet j5735 All-in-one Printer" :status :good -:model "HP Photosmart c4635 All-in-one Printer" +:model "HP Officejet j5738 All-in-one Printer" :status :good -:model "HP Photosmart c4640 All-in-one Printer" +:model "HP Officejet j5740 All-in-one Printer" :status :good -:model "HP Photosmart c4650 All-in-one Printer" +:model "HP Officejet j5750 All-in-one Printer" :status :good -:model "HP Officejet j4660 All-in-one Printer" +:model "HP Officejet j5780 All-in-one Printer" :status :good -:model "HP Photosmart c4670 All-in-one Printer" +:model "HP Officejet j5783 All-in-one Printer" :status :good -:model "HP Photosmart c4673 All-in-one Printer" +:model "HP Officejet j5785 All-in-one Printer" :status :good -:model "HP Officejet j4680 All-in-one Printer" +:model "HP Officejet j5788 All-in-one Printer" :status :good -:model "HP Photosmart c4680 All-in-one Printer" +:model "HP Officejet j5790 All-in-one Printer" :status :good -:model "HP Officejet j4680c All-in-one Printer" +:model "HP Officejet j6405 All-in-one Printer" :status :good -:model "HP Photosmart c4683 All-in-one Printer" +:model "HP Officejet j6410 All-in-one Printer" :status :good -:model "HP Photosmart c4688 All-in-one Printer" +:model "HP Officejet j6413 All-in-one Printer" :status :good -:model "HP Color LaserJet 4730x Multifunction Printer" +:model "HP Officejet j6415 All-in-one Printer" :status :good -:model "HP Color LaserJet 4730xs Multifunction Printer" +:model "HP Officejet j6424 All-in-one Printer" :status :good -:model "HP Color LaserJet cm4730 Multifunction Printer" +:model "HP Officejet j6450 All-in-one Printer" :status :good -:model "HP Color LaserJet 4730 Multifunction Printer" +:model "HP Officejet j6480 All-in-one Printer" :status :good -:model "HP Color LaserJet cm4730fsk Multifunction Printer" +:model "HP Officejet j6488 All-in-one Printer" :status :good -:model "HP Color LaserJet cm4730fm Multifunction Printer" +:model "HP Officejet k60 All-in-one Printer" :status :good -:model "HP Color LaserJet cm4730f Multifunction Printer" +:model "HP Officejet k60xi All-in-one Printer" :status :good -:model "HP Color LaserJet 4730xm Multifunction Printer" +:model "HP Officejet k80 All-in-one Printer" :status :good -:model "HP Photosmart c4740 All-in-one Printer" +:model "HP Officejet k80xi All-in-one Printer" :status :good -:model "HP Photosmart c4750 All-in-one Printer" +:model "HP Officejet Pro 1150c All-in-one Printer" :status :good -:model "HP Photosmart c4780 All-in-one Printer" +:model "HP Officejet Pro 1150cse All-in-one Printer" :status :good -:model "HP Photosmart c4783 All-in-one Printer" +:model "HP Officejet Pro 1170c All-in-one Printer" :status :good -:model "HP Photosmart c4785 All-in-one Printer" +:model "HP Officejet Pro 1170cse All-in-one Printer" :status :good -:model "HP Photosmart c4788 All-in-one Printer" +:model "HP Officejet Pro 1170cxi All-in-one Printer" :status :good -:model "HP Photosmart c4793 All-in-one Printer" +:model "HP Officejet Pro 1175c All-in-one Printer" :status :good -:model "HP Photosmart c4795 All-in-one Printer" +:model "HP Officejet Pro 1175cse All-in-one Printer" :status :good -:model "HP Photosmart c4798 All-in-one Printer" +:model "HP Officejet Pro 1175cxi All-in-one Printer" :status :good -:model "HP Photosmart c4799 All-in-one Printer" +:model "HP Officejet Pro 276dw Multifunction Printer" :status :good -:model "HP LaserJet m5035 Multifunction Printer" +:model "HP Officejet Pro 3610 Black And White E-all-in-one" :status :good -:model "HP LaserJet m5035xs Multifunction Printer" +:model "HP Officejet Pro 3620 Black And White E-all-in-one" :status :good -:model "HP LaserJet m5035x Multifunction Printer" +:model "HP Officejet Pro 6830 E-all-in-one" :status :good -:model "HP Officejet 5100 All-in-one Printer" +:model "HP Officejet Pro 6835 E-all-in-one" :status :good -:model "HP Officejet 5105 All-in-one Printer" +:model "HP Officejet Pro 6960 All-in-one" :status :good -:model "HP Officejet 5110 All-in-one Printer" +:model "HP Officejet Pro 6968 All-in-one" :status :good -:model "HP Officejet 5110v All-in-one Printer" +:model "HP Officejet Pro 6970 All-in-one" :status :good -:model "HP Officejet 5110xi All-in-one Printer" +:model "HP Officejet Pro 6975 All-in-one" +:status :good + +:model "HP Officejet Pro 6978 All-in-one" +:status :good + +:model "HP Officejet Pro 7720 Wide Format All-in-one" +:status :good + +:model "HP Officejet Pro 7730 Wide Format All-in-one" +:status :good + +:model "HP Officejet Pro 7740 Wide Format All-in-one" +:status :good + +:model "HP Officejet Pro 8020 All-in-one Printer Series" +:status :good + +:model "HP Officejet Pro 8030 All-in-one Printer Series" +:status :good + +:model "HP Officejet Pro 8500 All-in-one Printer - a909a" +:status :good + +:model "HP Officejet Pro 8500 Premier All-in-one Printer - a909n" +:status :good + +:model "HP Officejet Pro 8500 Wireless All-in-one Printer - a909g" +:status :good + +:model "HP Officejet Pro 8500a E-aio Printer - a910a" +:status :good + +:model "HP Officejet Pro 8500a Plus E-aio Printer - a910g" +:status :good + +:model "HP Officejet Pro 8500a Premium E-aio Printer - a910n" +:status :good + +:model "HP Officejet Pro 8600 E-aio n911a" +:status :good + +:model "HP Officejet Pro 8600 Plus E-aio n911g" +:status :good + +:model "HP Officejet Pro 8600 Premium E-aio n911n" +:status :good + +:model "HP Officejet Pro 8610 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8615 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8616 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8620 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8625 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8630 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8640 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8660 E-all-in-one Printer" +:status :good + +:model "HP Officejet Pro 8710 All-in-one Printer" +:status :good + +:model "HP Officejet Pro 8715 All-in-one Printer" +:status :good + +:model "HP Officejet Pro 8720 All-in-one Printer" +:status :good + +:model "HP Officejet Pro 8725 All-in-one Printer" +:status :good + +:model "HP Officejet Pro 8730" +:status :good + +:model "HP Officejet Pro 8732 All-in-one Printer" +:status :good + +:model "HP Officejet Pro 8740 All-in-one Printer" +:status :good + +:model "HP Officejet Pro All-in-one 9010" +:status :good + +:model "HP Officejet Pro All-in-one 9020" +:status :good + +:model "HP Officejet Pro l7300 Series All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7380 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7480 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7500 Series All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7550 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7555 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7580 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7590 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7600 Series All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7650 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7680 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7681 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7700 Series All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7710 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7750 All-in-one Printer" +:status :good + +:model "HP Officejet Pro l7780 All-in-one Printer" +:status :good + +:model "HP Officejet Pro x476 Multifunction Printer Series" +:status :good + +:model "HP Officejet Pro x476dn Multifunction Printer" +:status :good + +:model "HP Officejet Pro x476dw Multifunction Printer" +:status :good + +:model "HP Officejet Pro x576 Multifunction Printer Series" +:status :good + +:model "HP Officejet Pro x576dw Multifunction Printer" +:status :good + +:model "HP Officejet r40 All-in-one Printer" +:status :good + +:model "HP Officejet r40xi All-in-one Printer" +:status :good + +:model "HP Officejet r45 All-in-one Printer" +:status :good + +:model "HP Officejet r60 All-in-one Printer" +:status :good + +:model "HP Officejet r65 All-in-one Printer" +:status :good + +:model "HP Officejet r80 All-in-one Printer" +:status :good + +:model "HP Officejet r80xi All-in-one Printer" +:status :good + +:model "HP Officejet t45 All-in-one Printer" +:status :good + +:model "HP Officejet t45xi All-in-one Printer" +:status :good + +:model "HP Officejet t65 All-in-one Printer" +:status :good + +:model "HP Officejet t65xi All-in-one Printer" +:status :good + +:model "HP Officejet v30 All-in-one Printer" +:status :good + +:model "HP Officejet v40 All-in-one Printer" +:status :good + +:model "HP Officejet v40s All-in-one Printer" +:status :good + +:model "HP Officejet v40xi All-in-one Printer" +:status :good + +:model "HP Officejet v45 All-in-one Printer" +:status :good + +:model "HP Pagewide Managed MFP p57750dw" +:status :good + +:model "HP Pagewide Managed MFP p77740zs" +:status :good + +:model "HP Pagewide Managed MFP p77750z" +:status :good + +:model "HP Pagewide Managed MFP p77750zs" +:status :good + +:model "HP Pagewide MFP 377dw" +:status :good + +:model "HP Pagewide Pro 477dn Multifunction Printer" +:status :good + +:model "HP Pagewide Pro 477dw Multifunction Printer" +:status :good + +:model "HP Pagewide Pro 577dw Multifunction Printer" +:status :good + +:model "HP Pagewide Pro 577z Multifunction Printer" +:status :good + +:model "HP Pagewide Pro MFP 772dw" +:status :good + +:model "HP Photosmart 2570 All-in-one Printer" +:status :good + +:model "HP Photosmart 2571 All-in-one Printer" +:status :good + +:model "HP Photosmart 2573 All-in-one Printer" +:status :good + +:model "HP Photosmart 2574 All-in-one Printer" +:status :good + +:model "HP Photosmart 2575 All-in-one Printer" +:status :good + +:model "HP Photosmart 2575a All-in-one Printer" +:status :good + +:model "HP Photosmart 2575v All-in-one Printer" +:status :good + +:model "HP Photosmart 2575xi All-in-one Printer" +:status :good + +:model "HP Photosmart 2578 All-in-one Printer" +:status :good + +:model "HP Photosmart 2605 All-in-one Printer" +:status :good + +:model "HP Photosmart 2608 All-in-one Printer" +:status :good + +:model "HP Photosmart 2610 All-in-one Printer" +:status :good + +:model "HP Photosmart 2610v All-in-one Printer" +:status :good + +:model "HP Photosmart 2610xi All-in-one Printer" +:status :good + +:model "HP Photosmart 2613 All-in-one Printer" +:status :good + +:model "HP Photosmart 2615 All-in-one Printer" +:status :good + +:model "HP Photosmart 2710 All-in-one Printer" +:status :good + +:model "HP Photosmart 2710xi All-in-one Printer" +:status :good + +:model "HP Photosmart 2713 All-in-one Printer" +:status :good + +:model "HP Photosmart 3108 All-in-one Printer" +:status :good + +:model "HP Photosmart 3110 All-in-one Printer" +:status :good + +:model "HP Photosmart 3110v All-in-one Printer" +:status :good + +:model "HP Photosmart 3207 All-in-one Printer" +:status :good + +:model "HP Photosmart 3210 All-in-one Printer" +:status :good + +:model "HP Photosmart 3210a All-in-one Printer" +:status :good + +:model "HP Photosmart 3210v All-in-one Printer" +:status :good + +:model "HP Photosmart 3210xi All-in-one Printer" +:status :good + +:model "HP Photosmart 3213 All-in-one Printer" +:status :good + +:model "HP Photosmart 3214 All-in-one Printer" +:status :good + +:model "HP Photosmart 3308 All-in-one Printer" +:status :good + +:model "HP Photosmart 3310 All-in-one Printer" +:status :good + +:model "HP Photosmart 3310xi All-in-one Printer" +:status :good + +:model "HP Photosmart 3313 All-in-one Printer" +:status :good + +:model "HP Photosmart 3314 All-in-one Printer" +:status :good + +:model "HP Photosmart 5510 E-all-in-one" +:status :good + +:model "HP Photosmart 5510d E-all-in-one" +:status :good + +:model "HP Photosmart 5520 E-all-in-one" +:status :good + +:model "HP Photosmart 5521 E-all-in-one Printer" +:status :good + +:model "HP Photosmart 5522 E-all-in-one Printer" +:status :good + +:model "HP Photosmart 5524 E-all-in-one Printer" +:status :good + +:model "HP Photosmart 5525 E-all-in-one Printer" +:status :good + +:model "HP Photosmart 6510 E-all-in-one" +:status :good + +:model "HP Photosmart 6525 E All-in-one" +:status :good + +:model "HP Photosmart 7510 E-all-in-one" +:status :good + +:model "HP Photosmart 7520 E-all-in-one" +:status :good + +:model "HP Photosmart 7525 E-all-in-one" +:status :good + +:model "HP Photosmart All-in-one Printer - b010" +:status :good + +:model "HP Photosmart b109a Series" +:status :good + +:model "HP Photosmart c3110 All-in-one Printer" +:status :good + +:model "HP Photosmart c3125 All-in-one Printer" +:status :good + +:model "HP Photosmart c3135 All-in-one Printer" +:status :good + +:model "HP Photosmart c3140 All-in-one Printer" +:status :good + +:model "HP Photosmart c3150 All-in-one Printer" +:status :good + +:model "HP Photosmart c3170 All-in-one Printer" +:status :good + +:model "HP Photosmart c3173 All-in-one Printer" +:status :good + +:model "HP Photosmart c3175 All-in-one Printer" +:status :good + +:model "HP Photosmart c3180 All-in-one Printer" +:status :good + +:model "HP Photosmart c3183 All-in-one Printer" +:status :good + +:model "HP Photosmart c3188 All-in-one Printer" +:status :good + +:model "HP Photosmart c3190 All-in-one Printer" +:status :good + +:model "HP Photosmart c3193 All-in-one Printer" +:status :good + +:model "HP Photosmart c3194 All-in-one Printer" +:status :good + +:model "HP Photosmart c4110 All-in-one Printer" +:status :good + +:model "HP Photosmart c4140 All-in-one Printer" +:status :good + +:model "HP Photosmart c4150 All-in-one Printer" +:status :good + +:model "HP Photosmart c4170 All-in-one Printer" +:status :good + +:model "HP Photosmart c4173 All-in-one Printer" +:status :good + +:model "HP Photosmart c4175 All-in-one Printer" +:status :good + +:model "HP Photosmart c4180 All-in-one Printer" +:status :good + +:model "HP Photosmart c4183 All-in-one Printer" +:status :good + +:model "HP Photosmart c4188 All-in-one Printer" +:status :good + +:model "HP Photosmart c4190 All-in-one Printer" +:status :good + +:model "HP Photosmart c4193 All-in-one Printer" +:status :good + +:model "HP Photosmart c4194 All-in-one Printer" +:status :good + +:model "HP Photosmart c4205 All-in-one Printer" +:status :good + +:model "HP Photosmart c4210 All-in-one Printer" +:status :good + +:model "HP Photosmart c4235 All-in-one Printer" +:status :good + +:model "HP Photosmart c4240 All-in-one Printer" +:status :good + +:model "HP Photosmart c4250 All-in-one Printer" +:status :good + +:model "HP Photosmart c4270 All-in-one Printer" +:status :good + +:model "HP Photosmart c4272 All-in-one Printer" +:status :good + +:model "HP Photosmart c4273 All-in-one Printer" +:status :good + +:model "HP Photosmart c4275 All-in-one Printer" +:status :good + +:model "HP Photosmart c4280 All-in-one Printer" +:status :good + +:model "HP Photosmart c4283 All-in-one Printer" +:status :good + +:model "HP Photosmart c4285 All-in-one Printer" +:status :good + +:model "HP Photosmart c4288 All-in-one Printer" +:status :good + +:model "HP Photosmart c4293 All-in-one Printer" +:status :good + +:model "HP Photosmart c4294 All-in-one Printer" +:status :good + +:model "HP Photosmart c4340 All-in-one Printer" +:status :good + +:model "HP Photosmart c4342 All-in-one Printer" +:status :good + +:model "HP Photosmart c4343 All-in-one Printer" +:status :good + +:model "HP Photosmart c4344 All-in-one Printer" +:status :good + +:model "HP Photosmart c4345 All-in-one Printer" +:status :good + +:model "HP Photosmart c4348 All-in-one Printer" +:status :good + +:model "HP Photosmart c4380 All-in-one Printer" +:status :good + +:model "HP Photosmart c4383 All-in-one Printer" +:status :good + +:model "HP Photosmart c4384 All-in-one Printer" +:status :good + +:model "HP Photosmart c4385 All-in-one Printer" +:status :good + +:model "HP Photosmart c4388 All-in-one Printer" +:status :good + +:model "HP Photosmart c4410 All-in-one Printer" +:status :good + +:model "HP Photosmart c4424 All-in-one Printer" +:status :good + +:model "HP Photosmart c4435 All-in-one Printer" +:status :good + +:model "HP Photosmart c4440 All-in-one Printer" +:status :good + +:model "HP Photosmart c4450 All-in-one Printer" +:status :good + +:model "HP Photosmart c4470 All-in-one Printer" +:status :good + +:model "HP Photosmart c4472 All-in-one Printer" +:status :good + +:model "HP Photosmart c4473 All-in-one Printer" +:status :good + +:model "HP Photosmart c4480 All-in-one Printer" +:status :good + +:model "HP Photosmart c4483 All-in-one Printer" +:status :good + +:model "HP Photosmart c4485 All-in-one Printer" +:status :good + +:model "HP Photosmart c4486 All-in-one Printer" +:status :good + +:model "HP Photosmart c4488 All-in-one Printer" +:status :good + +:model "HP Photosmart c4490 All-in-one Printer" +:status :good + +:model "HP Photosmart c4493 All-in-one Printer" +:status :good + +:model "HP Photosmart c4494 All-in-one Printer" +:status :good + +:model "HP Photosmart c4540 All-in-one Printer" +:status :good + +:model "HP Photosmart c4550 All-in-one Printer" +:status :good + +:model "HP Photosmart c4570 All-in-one Printer" +:status :good + +:model "HP Photosmart c4572 All-in-one Printer" +:status :good + +:model "HP Photosmart c4573 All-in-one Printer" +:status :good + +:model "HP Photosmart c4575 All-in-one Printer" +:status :good + +:model "HP Photosmart c4580 All-in-one Printer" +:status :good + +:model "HP Photosmart c4583 All-in-one Printer" +:status :good + +:model "HP Photosmart c4585 All-in-one Printer" +:status :good + +:model "HP Photosmart c4588 All-in-one Printer" +:status :good + +:model "HP Photosmart c4593 All-in-one Printer" +:status :good + +:model "HP Photosmart c4599 All-in-one Printer" +:status :good + +:model "HP Photosmart c4610 All-in-one Printer" +:status :good + +:model "HP Photosmart c4635 All-in-one Printer" +:status :good + +:model "HP Photosmart c4640 All-in-one Printer" +:status :good + +:model "HP Photosmart c4650 All-in-one Printer" +:status :good + +:model "HP Photosmart c4670 All-in-one Printer" +:status :good + +:model "HP Photosmart c4673 All-in-one Printer" +:status :good + +:model "HP Photosmart c4680 All-in-one Printer" +:status :good + +:model "HP Photosmart c4683 All-in-one Printer" +:status :good + +:model "HP Photosmart c4688 All-in-one Printer" +:status :good + +:model "HP Photosmart c4740 All-in-one Printer" +:status :good + +:model "HP Photosmart c4750 All-in-one Printer" +:status :good + +:model "HP Photosmart c4780 All-in-one Printer" +:status :good + +:model "HP Photosmart c4783 All-in-one Printer" +:status :good + +:model "HP Photosmart c4785 All-in-one Printer" +:status :good + +:model "HP Photosmart c4788 All-in-one Printer" +:status :good + +:model "HP Photosmart c4793 All-in-one Printer" +:status :good + +:model "HP Photosmart c4795 All-in-one Printer" +:status :good + +:model "HP Photosmart c4798 All-in-one Printer" +:status :good + +:model "HP Photosmart c4799 All-in-one Printer" :status :good :model "HP Photosmart c5140 All-in-one Printer" @@ -1708,534 +3415,602 @@ :model "HP Photosmart c5393 All-in-one Printer" :status :good -:model "HP Officejet 5505 All-in-one Printer" +:model "HP Photosmart c5540 All-in-one Printer" :status :good -:model "HP Officejet j5505 All-in-one Printer" +:model "HP Photosmart c5550 All-in-one Printer" :status :good -:model "HP Officejet 5508 All-in-one Printer" +:model "HP Photosmart c5570 All-in-one Printer" :status :good -:model "HP Officejet j5508 All-in-one Printer" +:model "HP Photosmart c5580 All-in-one Printer" :status :good -:model "HP Officejet j5510v All-in-one Printer" +:model "HP Photosmart c6150 All-in-one Printer" :status :good -:model "HP Officejet 5510v All-in-one Printer" +:model "HP Photosmart c6154 All-in-one Printer" :status :good -:model "HP Officejet 5510xi All-in-one Printer" +:model "HP Photosmart c6170 All-in-one Printer" :status :good -:model "HP Officejet 5510 All-in-one Printer" +:model "HP Photosmart c6175 All-in-one Printer" :status :good -:model "HP Officejet j5510xi All-in-one Printer" +:model "HP Photosmart c6180 All-in-one Printer" :status :good -:model "HP Officejet j5510 All-in-one Printer" +:model "HP Photosmart c6183 All-in-one Printer" :status :good -:model "HP Officejet j5515 All-in-one Printer" +:model "HP Photosmart c6185 All-in-one Printer" :status :good -:model "HP Officejet 5515 All-in-one Printer" +:model "HP Photosmart c6188 All-in-one Printer" :status :good -:model "HP Officejet j5520 All-in-one Printer" +:model "HP Photosmart c6190 All-in-one Printer" :status :good -:model "HP Photosmart c5540 All-in-one Printer" +:model "HP Photosmart c6240 All-in-one Printer" :status :good -:model "HP Photosmart c5550 All-in-one Printer" +:model "HP Photosmart c6245 All-in-one Printer" :status :good -:model "HP Photosmart c5570 All-in-one Printer" +:model "HP Photosmart c6250 All-in-one Printer" :status :good -:model "HP Photosmart c5580 All-in-one Printer" +:model "HP Photosmart c6260 All-in-one Printer" :status :good -:model "HP Officejet 5600 Series All-in-one Printer" +:model "HP Photosmart c6263 All-in-one Printer" :status :good -:model "HP Officejet 5605 All-in-one Printer" +:model "HP Photosmart c6268 All-in-one Printer" :status :good -:model "HP Officejet 5607 All-in-one Printer" +:model "HP Photosmart c6270 All-in-one Printer" :status :good -:model "HP Officejet 5608 All-in-one Printer" +:model "HP Photosmart c6275 All-in-one Printer" :status :good -:model "HP Officejet 5609 All-in-one Printer" +:model "HP Photosmart c6280 All-in-one Printer" :status :good -:model "HP Officejet 5610v All-in-one Printer" +:model "HP Photosmart c6283 All-in-one Printer" :status :good -:model "HP Officejet 5610xi All-in-one Printer" +:model "HP Photosmart c6285 All-in-one Printer" :status :good -:model "HP Officejet 5610 All-in-one Printer" +:model "HP Photosmart c6286 All-in-one Printer" :status :good -:model "HP Officejet 5615 All-in-one Printer" +:model "HP Photosmart c6288 All-in-one Printer" :status :good -:model "HP Officejet 5679 All-in-one Printer" +:model "HP Photosmart c6324 All-in-one Printer" :status :good -:model "HP Officejet 5680 All-in-one Printer" +:model "HP Photosmart c6340 All-in-one Printer" :status :good -:model "HP Officejet j5725 All-in-one Printer" +:model "HP Photosmart c6350 All-in-one Printer" :status :good -:model "HP Officejet j5730 All-in-one Printer" +:model "HP Photosmart c6375 All-in-one Printer" :status :good -:model "HP Officejet j5735 All-in-one Printer" +:model "HP Photosmart c6380 All-in-one Printer" :status :good -:model "HP Officejet j5738 All-in-one Printer" +:model "HP Photosmart c6383 All-in-one Printer" :status :good -:model "HP Officejet j5740 All-in-one Printer" +:model "HP Photosmart c6388 All-in-one Printer" :status :good -:model "HP Officejet j5750 All-in-one Printer" +:model "HP Photosmart c7150 All-in-one Printer" :status :good -:model "HP Officejet j5780 All-in-one Printer" +:model "HP Photosmart c7154 All-in-one Printer" :status :good -:model "HP Officejet j5783 All-in-one Printer" +:model "HP Photosmart c7170 All-in-one Printer" :status :good -:model "HP Officejet j5785 All-in-one Printer" +:model "HP Photosmart c7180 All-in-one Printer" :status :good -:model "HP Officejet j5788 All-in-one Printer" +:model "HP Photosmart c7183 All-in-one Printer" :status :good -:model "HP Officejet j5790 All-in-one Printer" +:model "HP Photosmart c7185 All-in-one Printer" :status :good -:model "HP Officejet 6105 All-in-one Printer" +:model "HP Photosmart c7188 All-in-one Printer" :status :good -:model "HP Officejet 6110v All-in-one Printer" +:model "HP Photosmart c7190 All-in-one Printer" :status :good -:model "HP Officejet 6110 All-in-one Printer" +:model "HP Photosmart c7250 All-in-one Printer" :status :good -:model "HP Officejet 6110xi All-in-one Printer" +:model "HP Photosmart c7275 All-in-one Printer" :status :good -:model "HP Officejet 6150 All-in-one Printer" +:model "HP Photosmart c7280 All-in-one Printer" :status :good -:model "HP Photosmart c6150 All-in-one Printer" +:model "HP Photosmart c7283 All-in-one Printer" :status :good -:model "HP Photosmart c6154 All-in-one Printer" +:model "HP Photosmart c7288 All-in-one Printer" :status :good -:model "HP Photosmart c6170 All-in-one Printer" +:model "HP Photosmart c8150 All-in-one Printer" :status :good -:model "HP Photosmart c6175 All-in-one Printer" +:model "HP Photosmart c8180 All-in-one Printer" :status :good -:model "HP Photosmart c6180 All-in-one Printer" +:model "HP Photosmart c8183 All-in-one Printer" :status :good -:model "HP Photosmart c6183 All-in-one Printer" +:model "HP Photosmart c8188 All-in-one Printer" :status :good -:model "HP Photosmart c6185 All-in-one Printer" +:model "HP Photosmart d110 Series Printer" :status :good -:model "HP Photosmart c6188 All-in-one Printer" +:model "HP Photosmart Estn c510 Series" :status :good -:model "HP Photosmart c6190 All-in-one Printer" +:model "HP Photosmart Ink Adv k510" :status :good -:model "HP Officejet 6200 All-in-one Printer" +:model "HP Photosmart Plus All-in-one Printer - b209a" :status :good -:model "HP Officejet 6203 All-in-one Printer" +:model "HP Photosmart Plus All-in-one Printer - b209b" :status :good -:model "HP Officejet 6205 All-in-one Printer" +:model "HP Photosmart Plus All-in-one Printer - b209c" :status :good -:model "HP Officejet 6208 All-in-one Printer" +:model "HP Photosmart Plus b210 Series" :status :good -:model "HP Officejet 6210xi All-in-one Printer" +:model "HP Photosmart Prem c310 Series" :status :good -:model "HP Officejet 6210v All-in-one Printer" +:model "HP Photosmart Prem c410 Series" :status :good -:model "HP Officejet 6210 All-in-one Printer" +:model "HP Photosmart Premium All-in-one Printer Series - c309g" :status :good -:model "HP Officejet 6213 All-in-one Printer" +:model "HP Photosmart Premium All-in-one Printer Series - c309h" :status :good -:model "HP Officejet 6215 All-in-one Printer" +:model "HP Photosmart Premium Fax All-in-one Printer - c309a" :status :good -:model "HP Photosmart c6240 All-in-one Printer" +:model "HP Photosmart Premium Fax All-in-one Printer Series -c309a" :status :good -:model "HP Photosmart c6245 All-in-one Printer" +:model "HP Photosmart Premium Fax All-in-one Printer Series -c309c" :status :good -:model "HP Photosmart c6250 All-in-one Printer" +:model "HP Photosmart Wireless All-in-one Printer - b109n" :status :good -:model "HP Photosmart c6260 All-in-one Printer" +:model "HP Photosmart Wireless All-in-one Printer - b109q" :status :good -:model "HP Photosmart c6263 All-in-one Printer" +:model "HP Photosmart Wireless All-in-one Printer - b109qr" :status :good -:model "HP Photosmart c6268 All-in-one Printer" +:model "HP Photosmart Wireless All-in-one Printer - b110" :status :good -:model "HP Photosmart c6270 All-in-one Printer" +:model "HP Photsmart 6520 E All-in-one" :status :good -:model "HP Photosmart c6275 All-in-one Printer" +:model "HP Printer Scanner Copier 300" :status :good -:model "HP Photosmart c6280 All-in-one Printer" +:model "HP PSC 1000 Series" :status :good -:model "HP Photosmart c6283 All-in-one Printer" +:model "HP PSC 1110 All-in-one Printer" :status :good -:model "HP Photosmart c6285 All-in-one Printer" +:model "HP PSC 1110v All-in-one Printer" :status :good -:model "HP Photosmart c6286 All-in-one Printer" +:model "HP PSC 1118 All-in-one Printer" :status :good -:model "HP Photosmart c6288 All-in-one Printer" +:model "HP PSC 1200 All-in-one Printer" :status :good -:model "HP Officejet 6301 All-in-one Printer" +:model "HP PSC 1205 All-in-one Printer" :status :good -:model "HP Officejet 6304 All-in-one Printer" +:model "HP PSC 1209 All-in-one Printer" :status :good -:model "HP Officejet 6305 All-in-one Printer" +:model "HP PSC 1210 All-in-one Printer" :status :good -:model "HP Officejet 6307 All-in-one Printer" +:model "HP PSC 1210v All-in-one Printer" :status :good -:model "HP Officejet 6308 All-in-one Printer" +:model "HP PSC 1210xi All-in-one Printer" :status :good -:model "HP Officejet 6310 All-in-one Printer" +:model "HP PSC 1213 All-in-one Printer" :status :good -:model "HP Officejet 6310xi All-in-one Printer" +:model "HP PSC 1215 All-in-one Printer" :status :good -:model "HP Officejet 6310v All-in-one Printer" +:model "HP PSC 1216 All-in-one Printer" :status :good -:model "HP Officejet 6313 All-in-one Printer" +:model "HP PSC 1217 All-in-one Printer" :status :good -:model "HP Officejet 6315 All-in-one Printer" +:model "HP PSC 1218 All-in-one Printer" :status :good -:model "HP Officejet 6318 All-in-one Printer" +:model "HP PSC 1219 All-in-one Printer" :status :good -:model "HP Photosmart c6324 All-in-one Printer" +:model "HP PSC 1300 All-in-one Printer" :status :good -:model "HP Photosmart c6340 All-in-one Printer" +:model "HP PSC 1310 All-in-one Printer" :status :good -:model "HP Photosmart c6350 All-in-one Printer" +:model "HP PSC 1311 All-in-one Printer" :status :good -:model "HP Photosmart c6375 All-in-one Printer" +:model "HP PSC 1312 All-in-one Printer" :status :good -:model "HP Photosmart c6380 All-in-one Printer" +:model "HP PSC 1315 All-in-one Printer" :status :good -:model "HP Photosmart c6383 All-in-one Printer" +:model "HP PSC 1315s All-in-one Printer" :status :good -:model "HP Photosmart c6388 All-in-one Printer" +:model "HP PSC 1315v All-in-one Printer" :status :good -:model "HP Officejet j6405 All-in-one Printer" +:model "HP PSC 1315xi All-in-one Printer" :status :good -:model "HP Officejet j6410 All-in-one Printer" +:model "HP PSC 1317 All-in-one Printer" :status :good -:model "HP Officejet j6413 All-in-one Printer" +:model "HP PSC 1318 All-in-one Printer" :status :good -:model "HP Officejet j6415 All-in-one Printer" +:model "HP PSC 1340 All-in-one Printer" :status :good -:model "HP Officejet j6424 All-in-one Printer" +:model "HP PSC 1350 All-in-one Printer" :status :good -:model "HP Officejet j6450 All-in-one Printer" +:model "HP PSC 1350v All-in-one Printer" :status :good -:model "HP Officejet j6480 All-in-one Printer" +:model "HP PSC 1350xi All-in-one Printer" :status :good -:model "HP Officejet j6488 All-in-one Printer" +:model "HP PSC 1355 All-in-one Printer" :status :good -:model "HP Officejet 6500 Wireless All-in-one Printer - e709q" +:model "HP PSC 1358 Series" :status :good -:model "HP Officejet 6500 Wireless All-in-one Printer - e709n" +:model "HP PSC 1401 All-in-one Printer" :status :good -:model "HP Officejet 6500 All-in-one Printer - e709c" +:model "HP PSC 1402 All-in-one Printer" :status :good -:model "HP Officejet 6500 All-in-one Printer - e709a" +:model "HP PSC 1403 All-in-one Printer" :status :good -:model "HP Officejet 7100 All-in-one Printer" +:model "HP PSC 1406 All-in-one Printer" :status :good -:model "HP Officejet 7110xi All-in-one Printer" +:model "HP PSC 1408 All-in-one Printer" :status :good -:model "HP Officejet 7110 All-in-one Printer" +:model "HP PSC 1410 All-in-one Printer" :status :good -:model "HP Officejet 7115 All-in-one Printer" +:model "HP PSC 1410v All-in-one Printer" :status :good -:model "HP Officejet 7130 All-in-one Printer" +:model "HP PSC 1410xi All-in-one Printer" :status :good -:model "HP Officejet 7130xi All-in-one Printer" +:model "HP PSC 1415 All-in-one Printer" :status :good -:model "HP Officejet 7135xi All-in-one Printer" +:model "HP PSC 1417 All-in-one Printer" :status :good -:model "HP Officejet 7140xi All-in-one Printer" +:model "HP PSC 1508 All-in-one Printer" :status :good -:model "HP Photosmart c7150 All-in-one Printer" +:model "HP PSC 1510 All-in-one Printer" :status :good -:model "HP Photosmart c7154 All-in-one Printer" +:model "HP PSC 1510 Series" :status :good -:model "HP Photosmart c7170 All-in-one Printer" +:model "HP PSC 1510s All-in-one Printer" :status :good -:model "HP Photosmart c7180 All-in-one Printer" +:model "HP PSC 1510v All-in-one Printer" :status :good -:model "HP Photosmart c7183 All-in-one Printer" +:model "HP PSC 1510xi All-in-one Printer" :status :good -:model "HP Photosmart c7185 All-in-one Printer" +:model "HP PSC 1513 All-in-one Printer" :status :good -:model "HP Photosmart c7188 All-in-one Printer" +:model "HP PSC 1513s All-in-one Printer" :status :good -:model "HP Photosmart c7190 All-in-one Printer" +:model "HP PSC 1514 All-in-one Printer" :status :good -:model "HP Officejet 7205 All-in-one Printer" +:model "HP PSC 1600 All-in-one Printer" :status :good -:model "HP Officejet 7208 All-in-one Printer" +:model "HP PSC 1603 All-in-one Printer" :status :good -:model "HP Officejet 7210 All-in-one Printer" +:model "HP PSC 1605 All-in-one Printer" :status :good -:model "HP Officejet 7210v All-in-one Printer" +:model "HP PSC 1608 All-in-one Printer" :status :good -:model "HP Officejet 7210xi All-in-one Printer" +:model "HP PSC 1610 All-in-one Printer" :status :good -:model "HP Officejet 7213 All-in-one Printer" +:model "HP PSC 1610v All-in-one Printer" :status :good -:model "HP Officejet 7215 All-in-one Printer" +:model "HP PSC 1610xi All-in-one Printer" :status :good -:model "HP Photosmart c7250 All-in-one Printer" +:model "HP PSC 1613 All-in-one Printer" :status :good -:model "HP Photosmart c7275 All-in-one Printer" +:model "HP PSC 1615 All-in-one Printer" :status :good -:model "HP Photosmart c7280 All-in-one Printer" +:model "HP PSC 2105 All-in-one Printer" :status :good -:model "HP Photosmart c7283 All-in-one Printer" +:model "HP PSC 2108 All-in-one Printer" :status :good -:model "HP Photosmart c7288 All-in-one Printer" +:model "HP PSC 2110 All-in-one Printer" :status :good -:model "HP Officejet Pro l7300 Series All-in-one Printer" +:model "HP PSC 2110v All-in-one Printer" :status :good -:model "HP Officejet 7310xi All-in-one Printer" +:model "HP PSC 2110xi All-in-one Printer" :status :good -:model "HP Officejet 7310 All-in-one Printer" +:model "HP PSC 2115 All-in-one Printer" :status :good -:model "HP Officejet 7313 All-in-one Printer" +:model "HP PSC 2150 All-in-one Printer" :status :good -:model "HP Officejet Pro l7380 All-in-one Printer" +:model "HP PSC 2170 All-in-one Printer" :status :good -:model "HP Officejet 7408 All-in-one Printer" +:model "HP PSC 2171 All-in-one Printer" :status :good -:model "HP Officejet 7410xi All-in-one Printer" +:model "HP PSC 2175 All-in-one Printer" :status :good -:model "HP Officejet 7410 All-in-one Printer" +:model "HP PSC 2175v All-in-one Printer" :status :good -:model "HP Officejet 7413 All-in-one Printer" +:model "HP PSC 2175xi All-in-one Printer" :status :good -:model "HP Officejet Pro l7480 All-in-one Printer" +:model "HP PSC 2179 All-in-one Printer" :status :good -:model "HP Officejet Pro l7500 Series All-in-one Printer" +:model "HP PSC 2200 All-in-one Printer" :status :good -:model "HP Officejet Pro l7550 All-in-one Printer" +:model "HP PSC 2210 All-in-one Printer" :status :good -:model "HP Officejet Pro l7555 All-in-one Printer" +:model "HP PSC 2210v All-in-one Printer" :status :good -:model "HP Officejet Pro l7580 All-in-one Printer" +:model "HP PSC 2210xi All-in-one Printer" :status :good -:model "HP Officejet Pro l7590 All-in-one Printer" +:model "HP PSC 2300 Series All-in-one Printer" :status :good -:model "HP Officejet Pro l7600 Series All-in-one Printer" +:model "HP PSC 2310 All-in-one Printer" :status :good -:model "HP Officejet Pro l7650 All-in-one Printer" +:model "HP PSC 2350 All-in-one Printer" :status :good -:model "HP Officejet Pro l7680 All-in-one Printer" +:model "HP PSC 2352 All-in-one Printer" :status :good -:model "HP Officejet Pro l7681 All-in-one Printer" +:model "HP PSC 2353 All-in-one Printer" :status :good -:model "HP Officejet Pro l7700 Series All-in-one Printer" +:model "HP PSC 2353p All-in-one Printer" :status :good -:model "HP Officejet Pro l7710 All-in-one Printer" +:model "HP PSC 2355 All-in-one Printer" :status :good -:model "HP Officejet Pro l7750 All-in-one Printer" +:model "HP PSC 2355p All-in-one Printer" :status :good -:model "HP Officejet Pro l7780 All-in-one Printer" +:model "HP PSC 2355v All-in-one Printer" :status :good -:model "HP cm8050 Color Multifunction Printer With Edgeline Technology" +:model "HP PSC 2355xi All-in-one Printer" :status :good -:model "HP cm8060 Color Multifunction Printer With Edgeline Technology" +:model "HP PSC 2357 All-in-one Printer" :status :good -:model "HP LaserJet 8100 Multifunction Printer" +:model "HP PSC 2358 All-in-one Printer" :status :good -:model "HP LaserJet 8150 Multifunction Printer" +:model "HP PSC 2405 Photosmart All-in-one Printer" :status :good -:model "HP Photosmart c8150 All-in-one Printer" +:model "HP PSC 2410 Photosmart All-in-one Printer" :status :good -:model "HP Photosmart c8180 All-in-one Printer" +:model "HP PSC 2410v Photosmart All-in-one Printer" :status :good -:model "HP Photosmart c8183 All-in-one Printer" +:model "HP PSC 2410xi Photosmart All-in-one Printer" :status :good -:model "HP Photosmart c8188 All-in-one Printer" +:model "HP PSC 2420 Photosmart All-in-one Printer" :status :good -:model "HP Officejet Pro 8500 Premier All-in-one Printer - a909n" +:model "HP PSC 2450 Photosmart All-in-one Printer" :status :good -:model "HP Officejet Pro 8500 Wireless All-in-one Printer - a909g" +:model "HP PSC 2500 Photosmart All-in-one Printer" :status :good -:model "HP Officejet Pro 8500 All-in-one Printer - a909a" +:model "HP PSC 2510 Photosmart All-in-one Printer" :status :good -:model "HP LaserJet 9000 Multifunction Printer" +:model "HP PSC 2510xi Photosmart All-in-one Printer" :status :good -:model "HP LaserJet 9000l Multifunction Printer" +:model "HP PSC 2550 Photosmart All-in-one Printer" :status :good -:model "HP LaserJet 9040 Multifunction Printer" +:model "HP PSC 500 All-in-one Printer" :status :good -:model "HP LaserJet 9050 Multifunction Printer" +:model "HP PSC 500xi All-in-one Printer" :status :good -:model "HP LaserJet 9055 Multifunction Printer" +:model "HP PSC 720 All-in-one Printer" :status :good -:model "HP LaserJet 9065 Multifunction Printer" +:model "HP PSC 750 All-in-one Printer" :status :good -:model "HP Officejet 9110 All-in-one Printer" +:model "HP PSC 750xi All-in-one Printer" :status :good -:model "HP Officejet 9120 All-in-one Printer" +:model "HP PSC 760 All-in-one Printer" :status :good -:model "HP Officejet 9130 All-in-one Printer" +:model "HP PSC 780 All-in-one Printer" +:status :good + +:model "HP PSC 780xi All-in-one Printer" +:status :good + +:model "HP PSC 900 All-in-one Printer" +:status :good + +:model "HP PSC 920 All-in-one Printer" :status :good -:model "HP Color LaserJet 9500 Multifunction Printer" +:model "HP PSC 950 All-in-one Printer" :status :good +:model "HP PSC 950vr All-in-one Printer" +:status :good + +:model "HP PSC 950xi All-in-one Printer" +:status :good + +:model "HP Scanjet Enterprise 7500" +:status :good + +:model "HP Scanjet Enterprise Flow 5000 s4" +:status :good + +:model "HP Scanjet Enterprise Flow 7000 s3" +:status :good + +:model "HP Scanjet Enterprise Flow n9120 fn2 Document Scanner" +:status :good + +:model "HP Scanjet Pro 3000 s3" +:status :good + +:model "HP Scanjet Pro 3500 f1 Flatbed Scanner" +:status :good + +:model "HP Scanjet Pro 4500 fn1" +:status :good + +:model "HP Smart Tank 350" +:status :good + +:model "HP Smart Tank 500 Series" +:status :good + +:model "HP Smart Tank 510" +:status :good + +:model "HP Smart Tank 530 Series" +:status :good + +:model "HP Smart Tank 610" +:status :good + +:model "HP Smart Tank Plus 550" +:status :good + +:model "HP Smart Tank Plus 570 Series" +:status :good + +:model "HP Smart Tank Plus 650" +:status :good + +:model "HP Smart Tank Wireless 450" +:status :good + +:model "HP Tango" +:status :good + +:model "HP Tango X" +:status :good diff --git a/doc/descriptions-external/kodak-twain.desc b/doc/descriptions-external/kodak-twain.desc index 2d75cd1..97455b2 100644 --- a/doc/descriptions-external/kodak-twain.desc +++ b/doc/descriptions-external/kodak-twain.desc @@ -84,4 +84,3 @@ :interface "USB" :usbid "0x040a" "0x6011" :comment "Flatbed attachment for use with Kodak ADF scanner. Requires 12V power over usb cable. No report yet." - diff --git a/doc/descriptions-external/lhii.desc b/doc/descriptions-external/lhii.desc index a755709..19c642d 100644 --- a/doc/descriptions-external/lhii.desc +++ b/doc/descriptions-external/lhii.desc @@ -12,11 +12,9 @@ :backend "lhii" ; name of backend ;:version "0.42" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://www.sane-project.org/backends/lhii/lhii-v0.2.tgz" ; backend's web page -:comment "This backend is for old handscanners with proprietary adapter cards. You also need a kernel driver. You may find such drivers at that page: http://www.willamowius.de/scanner.html ." +:comment "This backend is for old handscanners with proprietary adapter cards. You also need a kernel driver. You may find such drivers at that page: http://www.willamowius.de/scanner.html ." ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -42,5 +40,3 @@ ; and at the top-level. ; :status specifier is optional after :model and at the top-level - - diff --git a/doc/descriptions-external/mustek_a3p1.desc b/doc/descriptions-external/mustek_a3p1.desc index e38b87a..3808cae 100644 --- a/doc/descriptions-external/mustek_a3p1.desc +++ b/doc/descriptions-external/mustek_a3p1.desc @@ -15,7 +15,3 @@ :status :minimal :usbid "0x055f" "0x0401" :comment "Reports about scanning problems. 1800 dpi seems to work if only small scan areas are selected." - - - - diff --git a/doc/descriptions-external/panamfs.desc b/doc/descriptions-external/panamfs.desc index fd49925..066207d 100644 --- a/doc/descriptions-external/panamfs.desc +++ b/doc/descriptions-external/panamfs.desc @@ -12,11 +12,9 @@ :backend "panamfs" ; name of backend ;:version "1.0.0" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://panasonic.net/pcc/support/fax/common/table/linuxdriver.html" ; backend's web page -:comment "External backend made by panasonic." +:comment "External backend made by panasonic." ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -54,4 +52,3 @@ :model "KX-MC6000 series" :status :untested :comment "No report yet." - diff --git a/doc/descriptions-external/primascan.desc b/doc/descriptions-external/primascan.desc index 1f02202..8533da3 100644 --- a/doc/descriptions-external/primascan.desc +++ b/doc/descriptions-external/primascan.desc @@ -12,11 +12,9 @@ :backend "primascan" ; name of backend ;:version "0.42" ; version of backend (or "unmaintained") -;:new :yes ; Is the backend new to this SANE release? - ; :yes or :no ;:manpage "sane-template" ; name of manpage (if it exists) :url "http://www.geocities.com/trsh0101/index.html" ; backend's web page -:comment "SANE backend and stand-alone program" +:comment "SANE backend and stand-alone program" ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions-external/primax.desc b/doc/descriptions-external/primax.desc index 30633b0..db245d4 100644 --- a/doc/descriptions-external/primax.desc +++ b/doc/descriptions-external/primax.desc @@ -40,7 +40,3 @@ :model "Colorpage-Vivid+" :interface "Parport" :status :untested - - - - diff --git a/doc/descriptions-external/scangearmp2.desc b/doc/descriptions-external/scangearmp2.desc new file mode 100644 index 0000000..d3ea973 --- /dev/null +++ b/doc/descriptions-external/scangearmp2.desc @@ -0,0 +1,425 @@ +; +; SANE Backend specification file +; +; It's basically emacs-lisp --- so ";" indicates comment to end of line. +; All syntactic elements are keyword tokens, followed by a string or +; keyword argument, as specified. +; +; ":backend" *must* be specified. +; All other information is optional (but what good is the file without it?). +; + +:backend "canon_pixma" ; name of backend +;:version "(external)" ; version of backend +:url "https://github.com/Ordissimo/scangearmp2/blob/master/README.md" ; backend's web page +:comment "External binary-only backend for Linux i386 and x86_64?. See the website for the latest release." + + + +:devicetype :scanner ; start of a list of devices.... + ; other types: :stillcam, :vidcam, + ; :meta, :api + +:mfg "Canon" ; name a manufacturer +:url "https://www.canon.com/" +:comment "Multi Function Peripheral. External backend made by Canon. Please check the Canon website and/or contact us if you have a Canon device not mentioned here." + +; +; Canon MFP2 conf file +; + +; ---- V390 -------------------------- +:model "G6000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1865" +:status :good + +:model "G6080 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1866" +:status :good + +:model "TS5300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188b" +:status :good + +:model "TS5380 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188c" +:status :good + +:model "TS6300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188d" +:status :good + +:model "TS6380 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188e" +:status :good + +:model "TS7330 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188f" +:status :good + +:model "TS8300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1890" +:status :good + +:model "TS8380 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1891" +:status :good + +:model "TS8330 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1892" +:status :good + +:model "XK60 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1893" +:status :good + +:model "TS6330 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1894" +:status :good + +:model "TS3300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x18a2" +:status :good + +:model "E3300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x18a3" +:status :good + +; ---- V370 -------------------------- +:model "TS8200 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1859" +:status :good + +:model "XK80 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1873" +:status :good + +:model "TS8230 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185b" +:status :good + +:model "TS8280 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185a" +:status :good + +:model "TS6200 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1856" +:status :good + +:model "TS6230 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1858" +:status :good + +:model "TS6280 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1857" +:status :good + +:model "TS9500 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185c" +:status :good + +:model "TR9530 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185e" +:status :good + +:model "TS9580 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185d" +:status :good + +:model "TR4500 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1854" +:status :good + +:model "E4200 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1855" +:status :good + +:model "LiDE 400" +:interface "USB" +:usbid "0x04a9" "0x1912" +:status :good + +:model "LiDE 300" +:interface "USB" +:usbid "0x04a9" "0x1913" +:status :good + + +; ---- V360 -------------------------- +:model "G3010 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183b" +:status :good + +:model "G4010 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183d" +:status :good + + +; ---- V350 -------------------------- +:model "TS9100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1820" +:status :good + +:model "TS8100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1821" +:status :good + +:model "TS6100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1822" +:status :good + +:model "TR8500 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1823" +:status :good + +:model "TR7500 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1824" +:status :good + +:model "TS5100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1825" +:status :good + +:model "TS3100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1827" +:status :good + +:model "E3100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1828" +:status :good + +:model "TS9180 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183e" +:status :good + +:model "TS8180 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183f" +:status :good + +:model "TS6180 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1840" +:status :good + +:model "TR8580 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1841" +:status :good + +:model "TS8130 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1842" +:status :good + +:model "TS6130 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1843" +:status :good + +:model "TR8530 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1844" +:status :good + +:model "TR7530 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1845" +:status :good + +:model "XK50 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1846" +:status :good + +:model "XK70 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1847" +:status :good + + +; ---- V340 -------------------------- +:model "TS9000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x179f" +:status :good + +:model "TS8000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1800" +:status :good + +:model "TS6000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1801" +:status :good + +:model "TS5000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1802" +:status :good + +:model "MG3000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x180b" +:status :good + +:model "E470 series" +:interface "USB" +:usbid "0x04a9" "0x180c" +:status :good + +:model "G4000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x181d" +:status :good + +; Network attached versions of the above +:model "MB2100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1793" +:status :good + +:model "MB2700 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1792" +:status :good + +:model "MB5100 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1790" +:status :good + +:model "MB5400 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178f" +:status :good + +; ---- V330 -------------------------- +:model "G3000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1794" +:status :good + + +; ---- V320 -------------------------- +:model "MG7700 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178b" +:status :good + +:model "MG6900 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178c" +:status :good + +:model "MG6800 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178d" +:status :good + +:model "MG5700 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178e" +:status :good + +:model "MG3600 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x178a" +:status :good + + +; ---- V310 -------------------------- +:model "MX490 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1787" +:status :good + +:model "E480 series" +:interface "USB" +:usbid "0x04a9" "0x1789" +:status :good + + +; ---- V300 -------------------------- +:model "MG7500 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x177c" +:status :good + +:model "MG6600 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x177e" +:status :good + +:model "MG5600 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x177f" +:status :good + +:model "MG2900 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1780" +:status :good + +:model "MB2000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1778" +:status :good + +:model "MB2300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1779" +:status :good + +:model "MB5000 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1776" +:status :good + +:model "MB5300 series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1777" +:status :good + +:model "E460 series" +:interface "USB" +:usbid "0x04a9" "0x1788" +:status :good diff --git a/doc/descriptions-external/template.desc. b/doc/descriptions-external/template.desc. index 25b9b5a..ce5d077 100644 --- a/doc/descriptions-external/template.desc. +++ b/doc/descriptions-external/template.desc. @@ -12,12 +12,10 @@ :backend "template" ; name of backend :version "0.42" ; version of backend (or "unmaintained") -:new :yes ; Is the backend new to this SANE release? - ; :yes or :no :manpage "sane-template" ; name of manpage (if it exists) :url "http://www.luser.com/temp/" ; backend's web page :url "http://www.luser.com/b/" ; another backend webpage -:comment "This backend supports only the USB and SCSI models" +:comment "This backend supports only the USB and SCSI models" ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -77,5 +75,3 @@ ; and at the top-level. ; :status specifier is optional after :model and at the top-level - - diff --git a/doc/descriptions-external/utsushi.desc b/doc/descriptions-external/utsushi.desc index d82ed18..105b0c7 100644 --- a/doc/descriptions-external/utsushi.desc +++ b/doc/descriptions-external/utsushi.desc @@ -1,5 +1,5 @@ ;;; utsushi.desc -*- emacs-lisp -*- (sort of) -;;; Copyright (C) 2015, 2016 Meeuwissen +;;; Copyright (C) 2015-2019 Olaf Meeuwissen ;;; ;;; License: GPL-3.0+ ;;; Author : Olaf Meeuwissen @@ -21,7 +21,7 @@ ;; Backend data ;; :backend "utsushi" -:url "https://github.com/utsushi/utsushi" +:url "https://gitlab.com/utsushi/utsushi" ;; Device and manufacturer information. ;; @@ -36,6 +36,20 @@ :usbid "0x04b8" "0x0152" :status :good +:model "DS-70" +:interface "USB" +:status :good +:comment "USB product ID one of 0x0160, 0x0166, 0x016c or 0x016e" + +:model "DS-80W" +:interface "USB" +:status :good +:comment "USB product ID one of 0x0160, 0x0166, 0x016c or 0x016e" + +:model "DS-410" +:interface "USB" +:status :good + :model "DS-510" :interface "USB" :usbid "0x04b8" "0x014c" @@ -46,16 +60,38 @@ :usbid "0x04b8" "0x0154" :status :good +:model "DS-530" +:interface "USB" +:usbid "0x04b8" "0x0155" +:status :good + +:model "DS-535" +:interface "USB" +:status :good + +:model "DS-535H" +:interface "USB" +:usbid "0x04b8" "0x017a" +:status :good + :model "DS-560" :interface "USB" :usbid "0x04b8" "0x0150" :status :good +:model "DS-575W" +:interface "USB" +:status :good + :model "DS-760" :interface "USB" :usbid "0x04b8" "0x014d" :status :good +:model "DS-775" +:interface "USB" +:status :good + :model "DS-780N" :interface "USB" :usbid "0x04b8" "0x0164" @@ -66,6 +102,11 @@ :usbid "0x04b8" "0x014d" :status :good +:model "DS-1630" +:interface "USB" +:usbid "0x04b8" "0x015c" +:status :good + :model "DS-5500" :interface "USB" :usbid "0x04b8" "0x0145" @@ -111,11 +152,36 @@ :usbid "0x04b8" "0x1109" :status :good +:model "ES-50" +:interface "USB" +:status :good +:comment "USB product ID one of 0x0160, 0x0166, 0x016c or 0x016e" + +:model "ES-55R" +:interface "USB" +:status :good +:comment "USB product ID one of 0x016d or 0x016f" + +:model "ES-60W" +:interface "USB" +:status :good +:comment "USB product ID one of 0x0160, 0x0166, 0x016c or 0x016e" + +:model "ES-65WR" +:interface "USB" +:status :good +:comment "USB product ID one of 0x016d or 0x016f" + :model "ES-400" :interface "USB" :usbid "0x04b8" "0x0156" :status :good +:model "ES-8500" +:interface "USB" +:usbid "0x04b8" "0x0109" +:status :basic + :model "ET-2500" :interface "USB" :usbid "0x04b8" "0x1105" @@ -126,6 +192,11 @@ :usbid "0x04b8" "0x1106" :status :good +:model "ET-3750" +:interface "USB" +:usbid "0x04b8" "0x1130" +:status :good + :model "ET-4500" :interface "USB" :usbid "0x04b8" "0x1107" @@ -136,6 +207,11 @@ :usbid "0x04b8" "0x1101" :status :good +:model "Expression 1640XL" +:interface "USB" +:usbid "0x04b8" "0x0109" +:status :basic + :model "L220" :interface "USB" :usbid "0x04b8" "0x08d1" @@ -156,6 +232,11 @@ :usbid "0x04b8" "0x08d2" :status :good +:model "L380 Series" +:interface "USB" +:usbid "0x04b8" "0x1120" +:status :good + :model "L455" :interface "USB" :usbid "0x04b8" "0x08c2" @@ -196,6 +277,16 @@ :usbid "0x04b8" "0x08ce" :status :good +:model "PX-M884F" +:interface "USB" +:usbid "0x04b8" "0x112e" +:status :good + +:model "WF-4720" +:interface "USB" +:usbid "0x04b8" "0x1125" +:status :good + :model "WF-6530" :interface "USB" :usbid "0x04b8" "0x08cd" @@ -266,6 +357,21 @@ :usbid "0x04b8" "0x110c" :status :good +:model "XP-540" +:interface "USB" +:usbid "0x04b8" "0x1117" +:status :good + +:model "XP-630" +:interface "USB" +:usbid "0x04b8" "0x110c" +:status :good + +:model "XP-640" +:interface "USB" +:usbid "0x04b8" "0x1117" +:status :good + :model "XP-830" :interface "USB" :usbid "0x04b8" "0x110b" @@ -280,11 +386,6 @@ ; Upstream releases have stopped providing the information we ; need to fill out the :model fields :-( -:model "PID 0155" -:interface "USB" -:usbid "0x04b8" "0x0155" -:status :good - :model "PID 0157" :interface "USB" :usbid "0x04b8" "0x0157" @@ -330,6 +431,60 @@ :usbid "0x04b8" "0x0163" :status :good +:model "PID 0165" +:interface "USB" +:usbid "0x04b8" "0x0165" +:status :good +:comment "propably one of DS-410, DS-535, DS-575W, DS-775" + +:model "PID 0167" +:interface "USB" +:usbid "0x04b8" "0x0167" +:status :good +:comment "propably one of DS-410, DS-535, DS-575W, DS-775" + +:model "PID 0168" +:interface "USB" +:usbid "0x04b8" "0x0168" +:status :good +:comment "propably one of DS-410, DS-535, DS-575W, DS-775" + +:model "PID 0169" +:interface "USB" +:usbid "0x04b8" "0x0169" +:status :good +:comment "propably one of DS-410, DS-535, DS-575W, DS-775" + +:model "PID 016B" +:interface "USB" +:usbid "0x04b8" "0x016b" +:status :good +:comment "probably a FastFoto 680W, could be a WorkForce ES-300WR or ES-500WR" + +:model "PID 016D" +:interface "USB" +:usbid "0x04b8" "0x016d" +:status :good +:comment "propably one of ES-55R, ES-65WR" + +:model "PID 016F" +:interface "USB" +:usbid "0x04b8" "0x016f" +:status :good +:comment "propably one of ES-55R, ES-65WR" + +:model "PID 0176" +:interface "USB" +:usbid "0x04b8" "0x0176" +:status :good +:comment "probably a WorkForce ES-300WR or ES-500WR, could be a FastFoto 680W" + +:model "PID 0177" +:interface "USB" +:usbid "0x04b8" "0x0177" +:status :good +:comment "probably a WorkForce ES-500WR or ES-300WR, could be a FastFoto 680W" + :model "PID 110D" :interface "USB" :usbid "0x04b8" "0x110d" @@ -411,11 +566,6 @@ :usbid "0x04b8" "0x111f" :status :good -:model "PID 1120" -:interface "USB" -:usbid "0x04b8" "0x1120" -:status :good - :model "PID 1121" :interface "USB" :usbid "0x04b8" "0x1121" @@ -451,8 +601,423 @@ :interface "USB" :usbid "0x04b8" "0x1128" :status :good +:comment "PX-Mxxxx?" + +:model "PID 1129" +:interface "USB" +:usbid "0x04b8" "0x1129" +:status :good +:comment "L61x0?" + +:model "PID 112A" +:interface "USB" +:usbid "0x04b8" "0x112a" +:status :good +:comment "L61x0?" :model "PID 112B" :interface "USB" :usbid "0x04b8" "0x112b" :status :good +:comment "ET-77xx?" + +:model "PID 112C" +:interface "USB" +:usbid "0x04b8" "0x112c" +:status :good +:comment "ET-77xx?" + +:model "PID 112D" +:interface "USB" +:usbid "0x04b8" "0x112d" +:status :good + +:model "PID 112F" +:interface "USB" +:usbid "0x04b8" "0x112f" +:status :good + +:model "PID 1130" +:interface "USB" +:usbid "0x04b8" "0x1130" +:status :good +:comment "L61x0?" + +:model "PID 1131" +:interface "USB" +:usbid "0x04b8" "0x1131" +:status :good +:comment "EP-8xxA?" + +:model "PID 1132" +:interface "USB" +:usbid "0x04b8" "0x1132" +:status :good + +:model "PID 1133" +:interface "USB" +:usbid "0x04b8" "0x1133" +:status :good +:comment "EP-810A?" + +:model "PID 1134" +:interface "USB" +:usbid "0x04b8" "0x1134" +:status :good +:comment "EP-710A?" + +:model "PID 1135" +:interface "USB" +:usbid "0x04b8" "0x1135" +:status :good +:comment "L61x0?" + +:model "PID 1136" +:interface "USB" +:usbid "0x04b8" "0x1136" +:status :good +:comment "L61x0?" + +:model "PID 1137" +:interface "USB" +:usbid "0x04b8" "0x1137" +:status :good +:comment "L61x0?" + +:model "PID 1138" +:interface "USB" +:usbid "0x04b8" "0x1138" +:status :good +:comment "L61x0?" + +:model "PID 1139" +:interface "USB" +:usbid "0x04b8" "0x1139" +:status :good + +:model "PID 113A" +:interface "USB" +:usbid "0x04b8" "0x113a" +:status :good + +:model "PID 113B" +:interface "USB" +:usbid "0x04b8" "0x113b" +:status :good +:comment "PX-Mxxxx?" + +:model "PID 113C" +:interface "USB" +:usbid "0x04b8" "0x113c" +:status :good +:comment "PX-Mxxxx?" + +:model "PID 113D" +:interface "USB" +:usbid "0x04b8" "0x113d" +:status :good + +:model "PID 113E" +:interface "USB" +:usbid "0x04b8" "0x113e" +:status :good + +:model "PID 113F" +:interface "USB" +:usbid "0x04b8" "0x113f" +:status :good + +:model "PID 1140" +:interface "USB" +:usbid "0x04b8" "0x1140" +:status :good + +:model "PID 1141" +:interface "USB" +:usbid "0x04b8" "0x1141" +:status :good + +:model "PID 1142" +:interface "USB" +:usbid "0x04b8" "0x1142" +:status :good + +:model "PID 1143" +:interface "USB" +:usbid "0x04b8" "0x1143" +:status :good +:comment "L3xxx?" + +:model "PID 1145" +:interface "USB" +:usbid "0x04b8" "0x1145" +:status :good +:comment "EP-81xA?" + +:model "PID 1146" +:interface "USB" +:usbid "0x04b8" "0x1146" +:status :good +:comment "EP-71xA?" + +:model "PID 1147" +:interface "USB" +:usbid "0x04b8" "0x1147" +:status :good +:comment "XP-7xxx?" + +:model "PID 1148" +:interface "USB" +:usbid "0x04b8" "0x1148" +:status :good +:comment "PX-M8xxFX?" + +:model "PID 1149" +:interface "USB" +:usbid "0x04b8" "0x1149" +:status :good +:comment "WF-37xx?" + +:model "PID 114A" +:interface "USB" +:usbid "0x04b8" "0x114a" +:status :good +:comment "L61x0?" + +:model "PID 114B" +:interface "USB" +:usbid "0x04b8" "0x114b" +:status :good +:comment "EP-8xxA?" + +:model "PID 114C" +:interface "USB" +:usbid "0x04b8" "0x114c" +:status :good +:comment "EP-8xxA?" + +:model "PID 114D" +:interface "USB" +:usbid "0x04b8" "0x114d" +:status :good +:comment "L5xxx" + +:model "PID 114E" +:interface "USB" +:usbid "0x04b8" "0x114e" +:status :good +:comment "XP21xx" + +:model "PID 114F" +:interface "USB" +:usbid "0x04b8" "0x114f" +:status :good +:comment "L5xxx" + +:model "PID 1150" +:interface "USB" +:usbid "0x04b8" "0x1150" +:status :good +:comment "L5xxx" + +:model "PID 1151" +:interface "USB" +:usbid "0x04b8" "0x1151" +:status :good +:comment "L5xxx" + +:model "PID 1152" +:interface "USB" +:usbid "0x04b8" "0x1152" +:status :good +:comment "PX-Mxxxx" + +:model "PID 1153" +:interface "USB" +:usbid "0x04b8" "0x1153" +:status :good +:comment "PX-Mxxxx" + +:model "PID 1154" +:interface "USB" +:usbid "0x04b8" "0x1154" +:status :good +:comment "L61x0" + +:model "PID 1155" +:interface "USB" +:usbid "0x04b8" "0x1155" +:status :good +:comment "L61x0" + +:model "PID 1156" +:interface "USB" +:usbid "0x04b8" "0x1156" +:status :good +:comment "L61x0" + +:model "PID 1157" +:interface "USB" +:usbid "0x04b8" "0x1157" +:status :good +:comment "L3xxx" + +:model "PID 1158" +:interface "USB" +:usbid "0x04b8" "0x1158" +:status :good +:comment "L3xxx" + +:model "PID 1159" +:interface "USB" +:usbid "0x04b8" "0x1159" +:status :good + +:model "PID 115A" +:interface "USB" +:usbid "0x04b8" "0x115a" +:status :good +:comment "EP8xxA" + +:model "PID 115B" +:interface "USB" +:usbid "0x04b8" "0x115b" +:status :good +:comment "EP9xxA3" + +:model "PID 115C" +:interface "USB" +:usbid "0x04b8" "0x115c" +:status :good +:comment "EP7xxA" + +:model "PID 115D" +:interface "USB" +:usbid "0x04b8" "0x115c" +:status :good +:comment "EP9xxA3" + +:model "PID 1160" +:interface "USB" +:usbid "0x04b8" "0x1160" +:status :good +:comment "L5xxx" + +:model "PID 1161" +:interface "USB" +:usbid "0x04b8" "0x1161" +:status :good +:comment "LX-10xxx" + +:model "PID 1162" +:interface "USB" +:usbid "0x04b8" "0x1162" +:status :good +:comment "EWM7xxTR" + +:model "PID 1163" +:interface "USB" +:usbid "0x04b8" "0x1163" +:status :good +:comment "EPM5xxT" + +:model "PID 1164" +:interface "USB" +:usbid "0x04b8" "0x1164" +:status :good +:comment "L61x0" + +:model "PID 1165" +:interface "USB" +:usbid "0x04b8" "0x1165" +:status :good +:comment "L61x0" + +:model "PID 1166" +:interface "USB" +:usbid "0x04b8" "0x1166" +:status :good +:comment "L61x0" + +:model "PID 1167" +:interface "USB" +:usbid "0x04b8" "0x1167" +:status :good +:comment "ET-16xxx" + +:model "PID 1168" +:interface "USB" +:usbid "0x04b8" "0x1168" +:status :good +:comment "ET-16xxx" + +:model "PID 1169" +:interface "USB" +:usbid "0x04b8" "0x1169" +:status :good +:comment "EWM7xxTR" + +:model "PID 116A" +:interface "USB" +:usbid "0x04b8" "0x116a" +:status :good +:comment "EWM7xxTR" + +:model "PID 116B" +:interface "USB" +:usbid "0x04b8" "0x116b" +:status :good + +:model "PID 116C" +:interface "USB" +:usbid "0x04b8" "0x116c" +:status :good +:comment "WFC8xxR" + +:model "PID 116D" +:interface "USB" +:usbid "0x04b8" "0x116d" +:status :good +:comment "WFC8xxR" + +:model "PID 116E" +:interface "USB" +:usbid "0x04b8" "0x116e" +:status :good +:comment "EWM7xxTR" + +:model "PID 116F" +:interface "USB" +:usbid "0x04b8" "0x116f" +:status :good +:comment "ET-16xxx" + +:model "PID 1170" +:interface "USB" +:usbid "0x04b8" "0x1170" +:status :good +:comment "ET-16xxx" + +:model "PID 1174" +:interface "USB" +:usbid "0x04b8" "0x1174" +:status :good +:comment "ET-58xx" + +:model "PID 1175" +:interface "USB" +:usbid "0x04b8" "0x1175" +:status :good +:comment "ET-58xx" + +:model "PID 1176" +:interface "USB" +:usbid "0x04b8" "0x1176" +:status :good +:comment "ET-58xx" + +:model "PID 1177" +:interface "USB" +:usbid "0x04b8" "0x1177" +:status :good +:comment "ET-16xxx" diff --git a/doc/descriptions.txt b/doc/descriptions.txt index d4cab94..13bd991 100644 --- a/doc/descriptions.txt +++ b/doc/descriptions.txt @@ -44,7 +44,7 @@ should be `unmaintained' or contain this tag together with the version number. `:new' indicates that the backend is brand-new in the latest SANE release if the keyword argument is `:yes'. Otherwise, `:no' should be used or `:new' -should be omitted at all. +should be omitted at all. Example: `:new :yes' The `:manpage' keyword token has one string argument that names the manual @@ -117,7 +117,7 @@ Multi-level keyword tokens -------------------------- The following keyword tokens can be used after `:backend', `:mfg', `:model', -and `:desc'. +and `:desc'. One or more `:url' keyword tokens can be used to point to more information about the entry the keyword refers to. The string argument contains a URL to diff --git a/doc/descriptions/agfafocus.desc b/doc/descriptions/agfafocus.desc index bcb482f..950dd58 100644 --- a/doc/descriptions/agfafocus.desc +++ b/doc/descriptions/agfafocus.desc @@ -1,6 +1,6 @@ :backend "agfafocus" :version "unmaintained" -:manpage "sane-agfafocus" +:manpage "sane-agfafocus" :devicetype :scanner diff --git a/doc/descriptions/apple.desc b/doc/descriptions/apple.desc index 046bb4e..462c745 100644 --- a/doc/descriptions/apple.desc +++ b/doc/descriptions/apple.desc @@ -6,9 +6,9 @@ ;:url "http://no.www.page.yet/" ; backend's web page :devicetype :scanner ; start of a list of devices.... - + :mfg "Apple" -:url "http://developer.apple.com/" +:url "http://developer.apple.com/" :model "Apple Scanner" :interface "SCSI" :status :good ; :alpha, :beta, :stable, :new diff --git a/doc/descriptions/avision.desc b/doc/descriptions/avision.desc index bff25f5..f428fe8 100644 --- a/doc/descriptions/avision.desc +++ b/doc/descriptions/avision.desc @@ -14,7 +14,7 @@ :backend "avision" ; version of backend -:version "Build: 296" +:version "Build: 296 (unmaintained)" ;status: alpha, beta, stable, new ;:status :stable @@ -854,4 +854,3 @@ :usbid "0x0482" "0x0335" :comment "1 pass, ??? dpi, A4" :status :untested - diff --git a/doc/descriptions/bh.desc b/doc/descriptions/bh.desc index cea51d7..08bf565 100644 --- a/doc/descriptions/bh.desc +++ b/doc/descriptions/bh.desc @@ -53,4 +53,3 @@ :comment "Simplex Scanner (with ACE)" ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - diff --git a/doc/descriptions/canon.desc b/doc/descriptions/canon.desc index c6db616..78a20c4 100644 --- a/doc/descriptions/canon.desc +++ b/doc/descriptions/canon.desc @@ -10,7 +10,7 @@ :backend "canon" ; name of backend :manpage "sane-canon" -:version "1.12" ; version of backend +:version "1.12 (unmaintained)" ; version of backend ;:status :good ; :alpha, :beta, :stable, :new :url "http://www.rzg.mpg.de/~mpd/sane/" ; backend home page @@ -62,4 +62,3 @@ :interface "SCSI" :comment "Rebadged CanoScan 300" :status :good - diff --git a/doc/descriptions/canon_dr.desc b/doc/descriptions/canon_dr.desc index 8bf6964..7a45d25 100644 --- a/doc/descriptions/canon_dr.desc +++ b/doc/descriptions/canon_dr.desc @@ -10,10 +10,10 @@ ; :backend "canon_dr" ; name of backend -:url "http://www.thebility.com/canon/" -:version "51" ; version of backend +:url "http://www.thebility.com/canon/" +:version "57" ; version of backend :manpage "sane-canon_dr" ; name of manpage (if it exists) -:comment "Backend updated for SANE release 1.0.25, see sane-canon_dr manpage" +:comment "Backend updated for SANE release 1.0.28, see sane-canon_dr manpage" :devicetype :scanner ; start of a list of devices.... ; other types: :stillcam, :vidcam, ; :meta, :api @@ -262,8 +262,8 @@ :model "DR-X10C" :interface "USB SCSI" :usbid "0x1083" "0x1618" -:status :untested -:comment "Please test!" +:status :good +:comment "Simplex, duplex, all resolutions, binary/ht/gray/color, async mode, dropout-color, multifeed/staple detection, deskew, autocrop working. Imprinter, barcode, custom gamma and multistream unsupported" :model "DR-C120" :interface "USB" @@ -398,4 +398,3 @@ :interface "USB" :usbid "0x1083" "0x1648" :status :untested - diff --git a/doc/descriptions/canon_pp.desc b/doc/descriptions/canon_pp.desc index 6a3613a..37e08f8 100644 --- a/doc/descriptions/canon_pp.desc +++ b/doc/descriptions/canon_pp.desc @@ -59,4 +59,3 @@ :interface "Parport (ECP)" :status :good :comment "Just an N640P in a different box?" - diff --git a/doc/descriptions/cardscan.desc b/doc/descriptions/cardscan.desc index df106de..bfa61e6 100644 --- a/doc/descriptions/cardscan.desc +++ b/doc/descriptions/cardscan.desc @@ -10,7 +10,7 @@ ; :backend "cardscan" ; name of backend -:url "http://www.thebility.com/cardscan/" +:url "http://www.thebility.com/cardscan/" :version "3" ; version of backend :manpage "sane-cardscan" ; name of manpage (if it exists) :comment "Backend updated for SANE release 1.0.21, see sane-cardscan manpage" @@ -40,4 +40,3 @@ :usbid "0x0451" "0x6250" :status :good :comment "4 inch wide 8bit Gray or 24bit Color simplex card/receipt scanner" - diff --git a/doc/descriptions/coolscan.desc b/doc/descriptions/coolscan.desc index 6ccb496..ea33f5c 100644 --- a/doc/descriptions/coolscan.desc +++ b/doc/descriptions/coolscan.desc @@ -26,7 +26,7 @@ :model "LS-30" ; name models for above-specified mfg. :interface "SCSI" -:comment "alpha: only 24/30 bit RGB + 32/40 bit RGBI" +:comment "alpha: only 24/30 bit RGB + 32/40 bit RGBI" :status :basic :model "LS-2000" ; name models for above-specified mfg. @@ -36,7 +36,7 @@ :model "LS-1000" :interface "SCSI" -:comment "Doesn't support gamma correction" +:comment "Doesn't support gamma correction" :status :basic ; :comment and :url specifiers are optional after :mfg, :model, :desc, diff --git a/doc/descriptions/coolscan2.desc b/doc/descriptions/coolscan2.desc index 7e34b33..377bc99 100644 --- a/doc/descriptions/coolscan2.desc +++ b/doc/descriptions/coolscan2.desc @@ -38,19 +38,19 @@ :comment "needs linux kernel 2.4.19 or later" :model "LS 50 ED" -;:url "/unsupported/nikon-ls50-ed.html" +;:url "unsupported/nikon-ls50-ed.html" :interface "USB" :usbid "0x04b0" "0x4001" :status :minimal :model "Coolscan V ED" -:url "/unsupported/nikon-ls50-ed.html" +:url "unsupported/nikon-ls50-ed.html" :interface "USB" :usbid "0x04b0" "0x4001" :status :minimal :model "Super Coolscan LS-5000 ED" -:url "/unsupported/nikon-ls5000-ed.html" +:url "unsupported/nikon-ls5000-ed.html" :interface "USB" :usbid "0x04b0" "0x4002" :status :untested diff --git a/doc/descriptions/coolscan3.desc b/doc/descriptions/coolscan3.desc index 136d75f..f11e10d 100644 --- a/doc/descriptions/coolscan3.desc +++ b/doc/descriptions/coolscan3.desc @@ -38,13 +38,13 @@ :comment "Rebadged LS 40?" :model "LS 50 ED" -:url "/unsupported/nikon-ls50-ed.html" +:url "unsupported/nikon-ls50-ed.html" :interface "USB" :usbid "0x04b0" "0x4001" :status :minimal :model "Coolscan V ED" -:url "/unsupported/nikon-ls50-ed.html" +:url "unsupported/nikon-ls50-ed.html" :interface "USB" :usbid "0x04b0" "0x4001" :status :minimal @@ -60,7 +60,7 @@ :comment "needs linux kernel 2.4.19 or later" :model "Super Coolscan LS-5000 ED" -:url "/unsupported/nikon-ls5000-ed.html" +:url "unsupported/nikon-ls5000-ed.html" :interface "USB" :usbid "0x04b0" "0x4002" :status :untested diff --git a/doc/descriptions/dc210.desc b/doc/descriptions/dc210.desc index 1f6191e..3012fdd 100644 --- a/doc/descriptions/dc210.desc +++ b/doc/descriptions/dc210.desc @@ -6,7 +6,7 @@ :url "mailto:peter@fales-lorenz.net" ; backend's web page :devicetype :stillcam ; start of a list of devices.... - + :mfg "Kodak" :url "http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml" :model "DC210" diff --git a/doc/descriptions/dc240.desc b/doc/descriptions/dc240.desc index 6250ce5..cfc6ab2 100644 --- a/doc/descriptions/dc240.desc +++ b/doc/descriptions/dc240.desc @@ -6,7 +6,7 @@ :url "mailto:peter@fales-lorenz.net" ; backend's web page :devicetype :stillcam ; start of a list of devices.... - + :mfg "Kodak" :url "http://www.kodak.com/global/en/service/products/ekn006568.jhtml" :model "DC240" diff --git a/doc/descriptions/dell1600n_net.desc b/doc/descriptions/dell1600n_net.desc index 6759564..0c31ea1 100644 --- a/doc/descriptions/dell1600n_net.desc +++ b/doc/descriptions/dell1600n_net.desc @@ -14,4 +14,3 @@ :usbid "0x413c" "0x5250" :status :basic :comment "Supports colour and monochrome scans over ethernet (USB not supported)" - diff --git a/doc/descriptions/dmc.desc b/doc/descriptions/dmc.desc index 348d737..08a01bb 100644 --- a/doc/descriptions/dmc.desc +++ b/doc/descriptions/dmc.desc @@ -26,4 +26,3 @@ :status :good ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - diff --git a/doc/descriptions/epson.desc b/doc/descriptions/epson.desc index 65f466f..fc901a7 100644 --- a/doc/descriptions/epson.desc +++ b/doc/descriptions/epson.desc @@ -316,10 +316,10 @@ :usbid "0x04b8" "0x082b" :status :good -:model "DX-6000" -:interface "USB" -:usbid "0x04b8" "0x082e" -:status :good +:model "DX-6000" +:interface "USB" +:usbid "0x04b8" "0x082e" +:status :good :model "DX-7400" :interface "USB" @@ -350,4 +350,3 @@ :interface "USB IEEE-1394" :usbid "0x04b8" "0x012c" :status :good - diff --git a/doc/descriptions/epson2.desc b/doc/descriptions/epson2.desc index 772a77f..d1f3bed 100644 --- a/doc/descriptions/epson2.desc +++ b/doc/descriptions/epson2.desc @@ -6,8 +6,6 @@ ; ; This file is derived from epkowa.desc, Copyright (C) Olaf Meeuwissen, ; distributed with "Image Scan!" and released under GPL. -; -; DO NOT EDIT - It's automatically generated. :backend "epson2" :version "1.0.124 (unmaintained)" @@ -163,6 +161,11 @@ :status :unsupported :comment "supported by the epkowa backend plus non-free interpreter" +:model "DS-G20000" +:interface "USB" +:usbid "0x04b8" "0x015b" +:status :good + :model "EP-702A" :interface "USB" :usbid "0x04b8" "0x0850" @@ -525,6 +528,11 @@ :status :good :comment "network interface supported via DFSG non-free iscan-network-nt package" +:model "ET-2650" +:interface "USB Ethernet" +:usbid "0x04b8" "0x1121" +:status :good + :model "Expression 636" :interface "SCSI" :status :complete @@ -590,6 +598,12 @@ :status :good :comment "overseas version of the ES-G11000" +:model "Expression 12000XL" +:interface "USB" +:usbid "0x04b8" "0x015b" +:status :good +:comment "overseas version of the DS-G20000" + :model "F-3200" ; product spec (JP) :interface "USB IEEE1394" :usbid "0x04b8" "0x080a" @@ -1040,6 +1054,16 @@ :status :complete :comment "network interface supported via DFSG non-free iscan-network-nt package<br>all-in-one" +:model "L380" +:interface "USB" +:usbid "0x04b8" "0x1120" +:status :good + +:model "L495" +:interface "USB Ethernet" +:usbid "0x04b8" "0x1121" +:status :good + :model "L550 Series" :interface "USB" :usbid "0x04b8" "0x08a9" @@ -3346,6 +3370,17 @@ :status :complete :comment "network interface supported via DFSG non-free iscan-network-nt package<br>all-in-one<br>overseas version of the PX-047A" +:model "XP-243 245 247 Series" +:interface "USB" +:usbid "0x04b8" "0x1116" +:status :good +:comment "network interface supported via DFSG non-free iscan-network-nt package<br>all-in-one" + +:model "XP-255" +:interface "USB" +:usbid "0x04b8" "0x113d" +:status :good + :model "XP-300 Series" :interface "USB" :usbid "0x04b8" "0x0898" @@ -3382,6 +3417,12 @@ :status :complete :comment "network interface supported via DFSG non-free iscan-network-nt package<br>all-in-one" +:model "XP-427" +:interface "USB" +:usbid "0x04b8" "0x1116" +:status :good +:comment "network interface supported via DFSG non-free iscan-network-nt package<br>all-in-one" + :model "XP-600 Series" :interface "USB" :usbid "0x04b8" "0x089e" @@ -3487,4 +3528,3 @@ :interface "USB" :usbid "0x04b8" "0x08a7" :status :good - diff --git a/doc/descriptions/epsonds.desc b/doc/descriptions/epsonds.desc index 99121d1..690dd25 100644 --- a/doc/descriptions/epsonds.desc +++ b/doc/descriptions/epsonds.desc @@ -94,4 +94,3 @@ :interface "USB" :usbid "0x04b8" "0x08cc" :status :untested - diff --git a/doc/descriptions/escl.desc b/doc/descriptions/escl.desc new file mode 100644 index 0000000..f654f75 --- /dev/null +++ b/doc/descriptions/escl.desc @@ -0,0 +1,7 @@ +:backend "escl" +:new :yes +:manpage "sane-escl" +:url "https://support.apple.com/en-us/HT201311" +:comment "The eSCL backend for sane supports AirScan/eSCL devices that announce themselves on mDNS as _uscan._utcp or _uscans._utcp" + +:devicetype :scanner diff --git a/doc/descriptions/fujitsu.desc b/doc/descriptions/fujitsu.desc index 60f8c5b..b858415 100644 --- a/doc/descriptions/fujitsu.desc +++ b/doc/descriptions/fujitsu.desc @@ -11,10 +11,10 @@ :backend "fujitsu" ; name of backend -:url "http://www.thebility.com/fujitsu/" -:version "133" ; version of backend +:url "http://www.thebility.com/fujitsu/" +:version "134" ; version of backend :manpage "sane-fujitsu" ; name of manpage (if it exists) -:comment "Backend updated for SANE release 1.0.26, see sane-fujitsu manpage" +:comment "Backend updated for SANE release 1.0.28, see sane-fujitsu manpage" :devicetype :scanner ; start of a list of devices.... ; other types: :stillcam, :vidcam, ; :meta, :api @@ -26,7 +26,7 @@ ; DISCONTINUED OLDER MODELS, SMALL :model "M3091DC" :interface "SCSI" -:url "http://www.remote.org/frederik/projects/software/sane/" +:url "http://www.remote.org/frederik/projects/software/sane/" :status :complete :comment "small, old, discontinued" @@ -131,12 +131,6 @@ :usbid "0x04c5" "0x116f" :comment "small, recent, discontinued" -:model "fi-6125" -:interface "USB" -:status :complete -:usbid "0x04c5" "0x11ee" -:comment "small, recent, discontinued" - :model "fi-6130" :interface "USB" :status :complete @@ -563,34 +557,11 @@ :status :untested :usbid "0x04c5" "0x14bd" -:model "fi-6225" -:interface "USB" -:status :untested -:usbid "0x04c5" "0x11ef" - :model "ScanSnap iX500EE" :interface "USB" :status :untested :usbid "0x04c5" "0x13f3" -:model "ScanPartner SP25" -:interface "USB" -:status :unsupported -:usbid "0x04c5" "0x1409" -:comment "Possibly Genesys protocol?" - -:model "ScanPartner SP30" -:interface "USB" -:status :unsupported -:usbid "0x04c5" "0x140a" -:comment "Possibly Genesys protocol?" - -:model "ScanPartner SP30F" -:interface "USB" -:status :unsupported -:usbid "0x04c5" "0x140c" -:comment "Possibly Genesys protocol?" - :model "N7100" :interface "USB Ethernet" :status :untested @@ -680,3 +651,9 @@ :interface "USB" :status :untested :usbid "0x04c5" "0x1522" + +:model "ScanSnap iX1500" +:interface "USB WiFi" +:status :good +:usbid "0x04c5" "0x159f" +:comment "small, current, WiFi not supported." diff --git a/doc/descriptions/genesys.desc b/doc/descriptions/genesys.desc index f6fb8a3..888f252 100644 --- a/doc/descriptions/genesys.desc +++ b/doc/descriptions/genesys.desc @@ -17,6 +17,21 @@ :status :basic :comment "Has a Primax USB ID" +:model "OpticFilm 7200i" +:interface "USB" +:usbid "0x07b3" "0x0c04" +:status :basic + +:model "OpticFilm 7300" +:interface "USB" +:usbid "0x07b3" "0x0c12" +:status :basic + +:model "OpticFilm 7500i" +:interface "USB" +:usbid "0x07b3" "0x0c13" +:status :basic + ; ----------------------------------------------------------------------------- :mfg "Medion/Lifetec/Tevion/Cytron" @@ -64,7 +79,7 @@ :status :basic :comment "clone of the HP 2400C" -:model "ScanJet 3670C" +:model "ScanJet 3670" :interface "USB" :usbid "0x03f0" "0x1405" :status :complete @@ -74,7 +89,7 @@ :interface "USB" :usbid "0x03f0" "0x1405" :status :complete -:comment "1200x1200 dpi max, same as HP 3670C" +:comment "1200x1200 dpi max, same as HP 3670" :model "ScanJet 4850C" :interface "USB" @@ -169,11 +184,11 @@ :status :complete :comment "GL124+ based, resolution from 75 to 4800 dpi" -:model "CanoScan 4400f" +:model "CanoScan 4400F" :interface "USB" :usbid "0x04a9" "0x2228" -:status :unsupported -:comment "GL843 based, to be added to the genesys backend" +:status :basic +:comment "GL843 based" :model "CanoScan 5600F" :interface "USB" @@ -181,6 +196,20 @@ :status :unsupported :comment "GL847 based, to be added to the genesys backend" +:model "CanoScan 8400F" +:url "unsupported/canon-8400f.html" +:interface "USB" +:usbid "0x04a9" "0x221e" +:status :basic +:comment "GL841 based, to be added to genesys backend" + +:model "CanoScan 8600F" +:url "unsupported/canon-8600.html" +:interface "USB" +:usbid "0x04a9" "0x2229" +:status :basic +:comment "normal and transparency scans work up to 1200 dpi resolution" + :model "CanoScan 700F" :interface "USB" :usbid "0x04a9" "0x1907" diff --git a/doc/descriptions/gphoto2.desc b/doc/descriptions/gphoto2.desc index f341649..dacc15d 100644 --- a/doc/descriptions/gphoto2.desc +++ b/doc/descriptions/gphoto2.desc @@ -6,7 +6,7 @@ :url "mailto:peter@fales-lorenz.net" ; backend's web page :devicetype :api ; start of a list of devices.... - + :desc "Multiple cameras supported by the gphoto2 libraries" :url "http://www.gphoto.org" ;:interface "USB, serial port" diff --git a/doc/descriptions/gt68xx.desc b/doc/descriptions/gt68xx.desc index 16e4af9..f101cd1 100644 --- a/doc/descriptions/gt68xx.desc +++ b/doc/descriptions/gt68xx.desc @@ -48,7 +48,7 @@ :url "http://www.genius-kye.com/" :model "ColorPage Slim 1200" -;:url "/unsupported/genius-colorpage-slim-1200.html" +;:url "unsupported/genius-colorpage-slim-1200.html" :interface "USB" :usbid "0x0458" "0x201e" :status :untested @@ -130,7 +130,7 @@ :mfg "Medion/Lifetec/Tevion/Cytron" :url "http://www.medion.com" :comment "Sold by Aldi and Tchibo." - + :model "MD 4394" :interface "USB" :usbid "0x05d8" "0x4002" @@ -406,6 +406,12 @@ :status :good :comment "Same as OpticSlim 2400." +:model "OpticSlim 500 plus" +:interface "USB" +:usbid "0x07b3" "0x046e" +:status :good +:comment "Need firmware from windows driver. Image is upside down because hardware in this model is upside down. Buttons not tested." + :model "Iriscan Express 2" :interface "USB" :usbid "0x07b3" "0x045f" diff --git a/doc/descriptions/hp.desc b/doc/descriptions/hp.desc index 24f4f4a..8cf94af 100644 --- a/doc/descriptions/hp.desc +++ b/doc/descriptions/hp.desc @@ -124,4 +124,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - diff --git a/doc/descriptions/hp3500.desc b/doc/descriptions/hp3500.desc index b67c01f..a8be5ef 100644 --- a/doc/descriptions/hp3500.desc +++ b/doc/descriptions/hp3500.desc @@ -9,7 +9,7 @@ ; :backend "hp3500" ; name of backend -:version "1.1" ; version of backend +:version "1.1 (unmaintained)" ; version of backend :manpage "sane-hp3500" ; name of manpage (if it exists) :url "http://projects.troy.rollo.name/rt-scanners/" ; backend's web page :comment "HP3500 series scanners." @@ -42,6 +42,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - - - diff --git a/doc/descriptions/hp3900.desc b/doc/descriptions/hp3900.desc index d1aa9a1..6c26b11 100644 --- a/doc/descriptions/hp3900.desc +++ b/doc/descriptions/hp3900.desc @@ -79,4 +79,3 @@ :usbid "0x04a5" "0x2211" :status :minimal :comment "developing yet" - diff --git a/doc/descriptions/hp4200.desc b/doc/descriptions/hp4200.desc index 6c25882..8fe9b0f 100644 --- a/doc/descriptions/hp4200.desc +++ b/doc/descriptions/hp4200.desc @@ -40,4 +40,4 @@ :comment "8bpp color, 75/150/300/600 dpi only" ; :comment and :url specifiers are optional after :mfg, :model, :desc, -; and at the top-level. +; and at the top-level. diff --git a/doc/descriptions/hp5400.desc b/doc/descriptions/hp5400.desc index 49d386f..1b6cb20 100644 --- a/doc/descriptions/hp5400.desc +++ b/doc/descriptions/hp5400.desc @@ -43,6 +43,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - - - diff --git a/doc/descriptions/hp5590.desc b/doc/descriptions/hp5590.desc index 6bb9ff5..5062f75 100644 --- a/doc/descriptions/hp5590.desc +++ b/doc/descriptions/hp5590.desc @@ -52,4 +52,3 @@ :usbid "0x03f0" "0x1805" :status :complete :comment "Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/ADF/ADF duplex/TMA slides/TMA negatives" - diff --git a/doc/descriptions/hpsj5s.desc b/doc/descriptions/hpsj5s.desc index c4bc100..4aa4de9 100644 --- a/doc/descriptions/hpsj5s.desc +++ b/doc/descriptions/hpsj5s.desc @@ -29,4 +29,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - diff --git a/doc/descriptions/hs2p.desc b/doc/descriptions/hs2p.desc index d02df83..4e2c2b4 100644 --- a/doc/descriptions/hs2p.desc +++ b/doc/descriptions/hs2p.desc @@ -10,7 +10,7 @@ :backend "hs2p" ; name of backend :url "http://www.acjlaw.net:8080/~jeremy/Ricoh/" -:version "1.00" ; version of backend +:version "1.00 (unmaintained)" ; version of backend ; :manpage "sane-hs2p" ; name of manpage (if it exists) :comment "This backend has been tested with the IS450DE (Duplex/Endorser). All major functions necessary for scanning are supported. This backend should work with all Ricoh scanners in the IS450 family as well as the IS420 series, but the IS420 has not yet been tested. Features provided by the optional Image Processing Unit (IPU) are not yet integrated into the backend, as my scanner lacks the IPU." diff --git a/doc/descriptions/kodak.desc b/doc/descriptions/kodak.desc index 7f0108a..7fd2167 100644 --- a/doc/descriptions/kodak.desc +++ b/doc/descriptions/kodak.desc @@ -1,5 +1,5 @@ :backend "kodak" -:url "http://www.thebility.com/kodak/" +:url "http://www.thebility.com/kodak/" :version "7" :manpage "sane-kodak" :comment "New backend for SANE release 1.0.21, see sane-kodak manpage" @@ -187,4 +187,3 @@ :interface "SCSI" :status :untested :comment "Please test!" - diff --git a/doc/descriptions/kodakaio.desc b/doc/descriptions/kodakaio.desc index 8c9c4ce..c2e12c4 100644 --- a/doc/descriptions/kodakaio.desc +++ b/doc/descriptions/kodakaio.desc @@ -1,5 +1,5 @@ :backend "kodakaio" -:url "http://sourceforge.net/projects/cupsdriverkodak/" +:url "http://sourceforge.net/projects/cupsdriverkodak/" :version "2.7.2" :manpage "sane-kodakaio" :comment "Backend for Kodak AiO ESP and Hero printers. Also possibly Advent AWL10" @@ -180,6 +180,3 @@ :usbid "0x040a" "0x4060" :status :untested :comment "Please test!" - - - diff --git a/doc/descriptions/kvs20xx.desc b/doc/descriptions/kvs20xx.desc index 35178e1..4463b8e 100644 --- a/doc/descriptions/kvs20xx.desc +++ b/doc/descriptions/kvs20xx.desc @@ -45,4 +45,3 @@ :interface "USB" :usbid "0x04da" "0x1009" :status :untested - diff --git a/doc/descriptions/kvs40xx.desc b/doc/descriptions/kvs40xx.desc index 8cc054f..24684be 100644 --- a/doc/descriptions/kvs40xx.desc +++ b/doc/descriptions/kvs40xx.desc @@ -32,4 +32,3 @@ :interface "USB" :usbid "0x04da" "0x100e" :status :untested - diff --git a/doc/descriptions/leo.desc b/doc/descriptions/leo.desc index cf0cec3..02a1156 100644 --- a/doc/descriptions/leo.desc +++ b/doc/descriptions/leo.desc @@ -17,7 +17,7 @@ :devicetype :scanner ; start of a list of devices.... :mfg "LEO" -:model "LEOScan S3" +:model "LEOScan S3" :interface "SCSI" :comment "FCC ID LUZFS1130" :status :good @@ -32,5 +32,3 @@ :model "FS-1130 Colorpage Scanner" :interface "SCSI" :status :good - - diff --git a/doc/descriptions/lexmark.desc b/doc/descriptions/lexmark.desc index ac0b97c..a97dd69 100644 --- a/doc/descriptions/lexmark.desc +++ b/doc/descriptions/lexmark.desc @@ -15,7 +15,7 @@ :url "http://stef.dev.free.fr/sane/lexmark" ; backend's web page -:comment "This backend supports lexmark x1100 series scanners." +:comment "This backend supports lexmark x1100 series scanners." ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions/ma1509.desc b/doc/descriptions/ma1509.desc index d28aeed..99456b2 100644 --- a/doc/descriptions/ma1509.desc +++ b/doc/descriptions/ma1509.desc @@ -26,7 +26,7 @@ :interface "USB" :usbid "0x055f" "0x0010" :status :good -:comment "Works upto 600 dpi. No support for TA and ADF yet." +:comment "Works upto 600 dpi. No support for TA and ADF yet." :mfg "Fujitsu" ; name a manufacturer :url "http://www.fujitsu.com/" @@ -35,4 +35,3 @@ :usbid "0x04c5" "0x1040" :status :unsupported :comment "Uses ma1509 chip, but very different from other scanners supported by the ma1509 backend" - diff --git a/doc/descriptions/magicolor.desc b/doc/descriptions/magicolor.desc index 7f0c341..f650c90 100644 --- a/doc/descriptions/magicolor.desc +++ b/doc/descriptions/magicolor.desc @@ -39,4 +39,3 @@ :usbid "ignore" :status :unsupported :comment "Uses a similar protocol as the magicolor 1690MF, according to Ilia Sotnikov." - diff --git a/doc/descriptions/matsushita.desc b/doc/descriptions/matsushita.desc index 51f330f..e671feb 100644 --- a/doc/descriptions/matsushita.desc +++ b/doc/descriptions/matsushita.desc @@ -69,6 +69,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - - - diff --git a/doc/descriptions/microtek.desc b/doc/descriptions/microtek.desc index 09203f5..e573cba 100644 --- a/doc/descriptions/microtek.desc +++ b/doc/descriptions/microtek.desc @@ -1,6 +1,6 @@ :backend "microtek" :version "0.13.1 (unmaintained)" -:manpage "sane-microtek" +:manpage "sane-microtek" :url "http://www.mir.com/mtek/" :devicetype :scanner diff --git a/doc/descriptions/microtek2.desc b/doc/descriptions/microtek2.desc index ae2b78d..8380d17 100644 --- a/doc/descriptions/microtek2.desc +++ b/doc/descriptions/microtek2.desc @@ -86,7 +86,7 @@ :status :good :model "ScanMaker 9800XL" -:url "/unsupported/microtek-scanmaker-9800.html" +:url "unsupported/microtek-scanmaker-9800.html" :interface "IEEE-1394" :status :minimal :comment "IEEE-1394 seems to work. See link. More reports welcome." @@ -164,4 +164,3 @@ :model "ColorPage-EP" :interface "Parport" :status :good - diff --git a/doc/descriptions/niash.desc b/doc/descriptions/niash.desc index 9be55f2..e4b66d9 100644 --- a/doc/descriptions/niash.desc +++ b/doc/descriptions/niash.desc @@ -57,7 +57,3 @@ :interface "USB" :usbid "0x047b" "0x1000" :status :complete - - - - diff --git a/doc/descriptions/p5.desc b/doc/descriptions/p5.desc index 7548902..b62a95a 100644 --- a/doc/descriptions/p5.desc +++ b/doc/descriptions/p5.desc @@ -24,7 +24,7 @@ :model "PagePartner" :interface "Parport (EPP/ECP)" -:status :basic +:status :basic :comment "Sheetfed scanner, work in gray and color, but uncalibrated scans" ; :comment and :url specifiers are optional after :mfg, :model, :desc, diff --git a/doc/descriptions/pixma.desc b/doc/descriptions/pixma.desc index ad33faa..4366891 100644 --- a/doc/descriptions/pixma.desc +++ b/doc/descriptions/pixma.desc @@ -11,7 +11,7 @@ ; See doc/descriptions.txt for details. :backend "pixma" ; name of backend -:version "0.17.37" ; version of backend (or "unmaintained") +:version "0.27.0" ; version of backend (or "unmaintained") :manpage "sane-pixma" ; name of manpage (if it exists) ;:comment "Devices marked as experimantal are disabled by default. See the manual page for how to enable them." @@ -28,8 +28,14 @@ :status :untested :comment "Testers needed!" -:model "PIXMA E460 Series" +:model "PIXMA E410 Series" :interface "USB" +:usbid "0x04a9" "0x181e" +:status :untested +:comment "Testers needed!" + +:model "PIXMA E460 Series" +:interface "USB Ethernet" :usbid "0x04a9" "0x1788" :status :untested :comment "Testers needed!" @@ -55,8 +61,8 @@ :model "PIXMA E510" :interface "USB" :usbid "0x04a9" "0x1761" -:status :untested -:comment "Testers needed!" +:status :complete +:comment "All resolutions supported (up to 1200DPI)." :model "PIXMA E560" :interface "USB" @@ -76,12 +82,78 @@ :status :untested :comment "Testers needed!" -:model "PIXMA G3000" -:interface "USB WIFI" +:model "PIXMA E3100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1828" +:status :untested +:comment "Testers needed!" + +:model "PIXMA E3300 Series" +:interface "USB" +:usbid "0x04a9" "0x18a3" +:status :untested +:comment "Testers needed!" + +:model "PIXMA E4200 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1855" +:status :untested +:comment "Testers needed!" + +:model "PIXMA G2000" +:interface "USB" +:usbid "0x04a9" "0x1795" +:status :complete +:comment "All resolutions supported (up to 600DPI)." + +:model "PIXMA G2010 Series" +:interface "USB" +:usbid "0x04a9" "0x183a" +:status :complete +:comment "All resolutions supported (up to 600DPI)." + +:model "PIXMA G2100" +:interface "USB" +:usbid "0x04a9" "0x1795" +:status :complete +:comment "All resolutions supported (up to 600DPI)." + +:model "PIXMA G3000 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1794" +:status :untested +:comment "Testers needed!" + +:model "PIXMA G3010 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183b" +:status :untested +:comment "Testers needed!" + +:model "PIXMA G4000 Series" +:interface "USB WiFi" :usbid "0x04a9" "0x181d" :status :untested :comment "Testers needed!" +:model "PIXMA G4010 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183d" +:status :untested +:comment "Testers needed!" + +:model "PIXMA G6000" +:interface "USB WiFi" +:usbid "0x04a9" "0x1865" +:status :untested +:comment "Testers needed!" + +:model "PIXMA G6080" +:interface "USB WiFi" +:usbid "0x04a9" "0x1866" +:status :untested +:comment "Testers needed!" + :model "PIXMA MG2100 Series" :interface "USB" :usbid "0x04a9" "0x1751" @@ -115,8 +187,8 @@ :model "PIXMA MG3000 Series" :interface "USB WiFi" :usbid "0x04a9" "0x180b" -:status :untested -:comment "Testers needed!" +:status :good +:comment "All resolutions supported (up to 600DPI). WiFi not working." :model "PIXMA MG3100 Series" :interface "USB WiFi" @@ -245,7 +317,7 @@ :comment "Testers needed!" :model "PIXMA MG7100 Series" -:interface "USB" +:interface "USB Ethernet WiFi" :usbid "0x04a9" "0x1772" :status :complete :comment "All resolutions supported (up to 2400DPI)." @@ -274,18 +346,6 @@ :status :complete :comment "All resolutions supported (up to 4800DPI)." -:model "PIXUS MP5" -:interface "USB" -:usbid "0x04a9" "0x2635" -:status :untested -:comment "Testers needed! Identical with imageCLASS MPC190." - -:model "PIXUS MP10" -:interface "USB" -:usbid "0x04a9" "0x261f" -:status :complete -:comment "All resolutions supported (up to 600DPI). Identical with imageCLASS MPC200." - :model "PIXMA MP140" :interface "USB" :usbid "0x04a9" "0x172b" @@ -791,27 +851,273 @@ :status :complete :comment "Flatbed and ADF scan. All resolutions supported (up to 4800DPI)" -:model "PIXMA TS9000 Series" +:model "PIXMA TR4500 Series" :interface "USB WiFi" -:usbid "0x04a9" "0x179f" +:usbid "0x04a9" "0x1854" :status :untested :comment "Testers needed!" -:model "PIXMA TS8000 Series" +:model "PIXMA TR7500 Series" :interface "USB WiFi" -:usbid "0x04a9" "0x1800" +:usbid "0x04a9" "0x1824" :status :untested :comment "Testers needed!" -:model "PIXMA TS6000 Series" +:model "PIXMA TR7530 Series" :interface "USB WiFi" -:usbid "0x04a9" "0x1801" +:usbid "0x04a9" "0x1845" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TR8500 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x1823" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TR8530 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x1844" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TR8580 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x1841" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TR9530 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185e" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS3100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1827" +:status :good +:comment "All resolutions supported (up to 600DPI). WiFi not working." + +:model "PIXMA TS3300 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x18a2" :status :untested :comment "Testers needed!" :model "PIXMA TS5000 Series" :interface "USB WiFi" :usbid "0x04a9" "0x1802" +:status :good +:comment "All resolutions supported (up to 1200DPI). WiFi not working." + +:model "PIXMA TS5100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1825" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS5300 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188b" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS5380 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188c" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6000 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1801" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1822" +:status :good +:comment "All resolutions supported (up to 2400DPI). WiFi not working." + +:model "PIXMA TS6130 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1843" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6180 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1840" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6200 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1856" +:status :good +:comment "All resolutions supported (up to 1200DPI). WiFi not working." + +:model "PIXMA TS6230 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1858" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6280 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1857" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6300 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188b" +:status :good +:comment "Testers needed!" + +:model "PIXMA TS6330 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1894" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS6380 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188e" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS7330 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x188f" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8000 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1800" +:status :good +:comment "All resolutions supported (up to 2400DPI). WiFi not working." + +:model "PIXMA TS8100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1821" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8130 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1842" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8180 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x183f" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8200 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1859" +:status :good +:comment "All resolutions supported (up to 1200DPI). WiFi not working." + +:model "PIXMA TS8230 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185b" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8280 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185a" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8300 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1890" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8330 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1892" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS8380 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1891" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS9000 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x179f" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS9100 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x1820" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS9180 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x183e" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS9500 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185c" +:status :untested +:comment "Testers needed!" + +:model "PIXMA TS9580 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x185d" +:status :untested +:comment "Testers needed!" + +:model "PIXUS MP5" +:interface "USB" +:usbid "0x04a9" "0x2635" +:status :untested +:comment "Testers needed! Identical with imageCLASS MPC190." + +:model "PIXUS MP10" +:interface "USB" +:usbid "0x04a9" "0x261f" +:status :complete +:comment "All resolutions supported (up to 600DPI). Identical with imageCLASS MPC200." + +:model "PIXUS XK50 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1846" +:status :untested +:comment "Testers needed!" + +:model "CanoScan XK 60" +:interface "USB" +:usbid "0x04a9" "0x1893" +:status :untested +:comment "Testers needed!" + +:model "PIXUS XK70 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1847" +:status :untested +:comment "Testers needed!" + +:model "PIXUS XK80 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1873" :status :untested :comment "Testers needed!" @@ -833,11 +1139,29 @@ :status :complete :comment "All resolutions supported (up to 600DPI)" +:model "imageCLASS D550" +:interface "USB" +:usbid "0x04a9" "0x2738" +:status :untested +:comment "Testers needed!" + +:model "imageCLASS D570" +:interface "USB" +:usbid "0x04a9" "0x27e8" +:status :complete +:comment "All resolutions supported (up to 600DPI)" + +:model "i-SENSYS MF110 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27ed" +:status :untested +:comment "Testers needed! WiFi only for w Types." + :model "i-SENSYS MF210 Series" :interface "USB Ethernet WiFi" :usbid "0x04a9" "0x27a9" -:status :untested -:comment "Testers needed!" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI). WiFi only for w Types." :model "i-SENSYS MF220 Series" :interface "USB Ethernet WiFi" @@ -854,8 +1178,98 @@ :model "i-SENSYS MF240 Series" :interface "USB Ethernet WiFi" :usbid "0x04a9" "0x27d2" +:status :good +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI, ADF up to 300DPI). 216mm image width buggy, restricted to 215mm." + +:model "i-SENSYS MF260 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27f4" +:status :untested +:comment "Testers needed! Duplex only for MF269." + +:model "i-SENSYS MF410 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27c0" +:status :untested +:comment "Testers needed!" + +:model "i-SENSYS MF420 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27f1" +:status :untested +:comment "Testers needed!" + +:model "i-SENSYS MF510 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27c2" +:status :untested +:comment "Testers needed!" + +:model "i-SENSYS MF520 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27f0" +:status :untested +:comment "Testers needed!" + +:model "i-SENSYS MF620 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27b4" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF630 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27e1" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "imageCLASS MF634C" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27e2" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF640 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27fe" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF645C" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27fd" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF730 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27e4" +:status :good +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI). Ethernet and WiFi not tested yet" + +:model "imageCLASS MF733Cdw" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27e5" :status :complete -:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI). ADF only 300DPI." +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF731/733" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27e5" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." + +:model "i-SENSYS MF740 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27fb" +:status :untested +:comment "Testers needed!" + +:model "i-SENSYS MF741/743" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x27fc" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)." :model "i-SENSYS MF810/820" :interface "USB Ethernet" @@ -1070,8 +1484,8 @@ :model "imageCLASS MF8030" :interface "USB" :usbid "0x04a9" "0x2707" -:status :untested -:comment "Testers needed!" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)" :model "imageCLASS MF8170c" :interface "USB" @@ -1118,33 +1532,57 @@ :model "imageRUNNER 1133" :interface "USB" :usbid "0x04a9" "0x2742" -:status :untested -:comment "Testers needed!" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 600DPI)" :model "MAXIFY MB2000 Series" -:interface "USB" +:interface "USB WiFi" :usbid "0x04a9" "0x1778" -:status :untested -:comment "Testers needed!" +:status :good +:comment "Flatbed works, All resolutions supported (up to 1200DPI), ADF does not work" + +:model "MAXIFY MB2100 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1793" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 1200DPI)." :model "MAXIFY MB2300 Series" -:interface "USB" +:interface "USB Ethernet WiFi" :usbid "0x04a9" "0x1779" -:status :untested -:comment "Testers needed!" +:status :good +:comment "Flatbed and ADF scan. All resolutions supported (up to 1200DPI), ADF does not work" + +:model "MAXIFY MB2700 Series" +:interface "USB WiFi" +:usbid "0x04a9" "0x1792" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 1200DPI)." :model "MAXIFY MB5000 Series" :interface "USB" :usbid "0x04a9" "0x1776" :status :complete -:comment "Flatbed works, All resolutions supported (up to 1200DPI), ADF does not work" +:comment "Flatbed and ADF scan. All resolutions supported (up to 1200DPI)." -:model "MAXIFY MB5300 Series" -:interface "USB" -:usbid "0x04a9" "0x1777" +:model "MAXIFY MB5100 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x1790" :status :untested :comment "Testers needed!" +:model "MAXIFY MB5300 Series" +:interface "USB Ethernet" +:usbid "0x04a9" "0x1777" +:status :good +:comment "1200dpi scans do not work" + +:model "MAXIFY MB5400 Series" +:interface "USB Ethernet WiFi" +:usbid "0x04a9" "0x178f" +:status :complete +:comment "Flatbed and ADF scan. All resolutions supported (up to 1200DPI)." + :model "CanoScan 8800F" :interface "USB" :usbid "0x04a9" "0x1901" @@ -1162,3 +1600,15 @@ :usbid "0x04a9" "0x190d" :status :complete :comment "Full flatbed support up to 4800DPI (Note: flatbed does not have 9600DPI capability). Full TPU support (negatives, slides and infrared) up to 9600DPI." + +:model "CanoScan LiDE 300" +:interface "USB" +:usbid "0x04a9" "0x1913" +:status :complete +:comment "All resolutions supported (up to 2400DPI)" + +:model "CanoScan LiDE 400" +:interface "USB" +:usbid "0x04a9" "0x1912" +:status :complete +:comment "All resolutions supported (up to 4800DPI)" diff --git a/doc/descriptions/plustek.desc b/doc/descriptions/plustek.desc index ba69b47..a8204aa 100644 --- a/doc/descriptions/plustek.desc +++ b/doc/descriptions/plustek.desc @@ -5,8 +5,6 @@ :backend "plustek" :version "0.52" :manpage "sane-plustek" -; backend's web page -:url "http://www.gjaeger.de/scanner/plustek/" :devicetype :scanner @@ -202,27 +200,51 @@ :mfg "Canon" :url "http://www.canon.com/" -:model "CanoScan N650U/N656U" +:model "CanoScan N650U" :interface "USB" :usbid "0x04a9" "0x2206" :status :complete +:model "CanoScan N656U" +:interface "USB" +:usbid "0x04a9" "0x2206" +:status :complete +:comment "Identical to CanoScan N650U" + :model "CanoScan N1220U" :interface "USB" :usbid "0x04a9" "0x2207" :status :complete -:model "CanoScan N670U/N676U/LiDE20" +:model "CanoScan N670U" +:interface "USB" +:usbid "0x04a9" "0x220d" +:status :complete + +:model "CanoScan N676U" :interface "USB" :usbid "0x04a9" "0x220d" :status :complete +:comment "Identical to CanoScan N670U" + +:model "CanoScan LiDE 20" +:interface "USB" +:usbid "0x04a9" "0x220d" +:status :complete +:comment "Identical to CanoScan N670U" + +:model "CanoScan N1240U" +:interface "USB" +:usbid "0x04a9" "0x220e" +:status :complete -:model "CanoScan N1240U/LiDE30" +:model "CanoScan LiDE 30" :interface "USB" :usbid "0x04a9" "0x220e" :status :complete +:comment "Identical to CanoScan N1240U" -:model "CanoScan LiDE25" +:model "CanoScan LiDE 25" :interface "USB" :usbid "0x04a9" "0x2220" :status :good diff --git a/doc/descriptions/plustek_pp.desc b/doc/descriptions/plustek_pp.desc index 5b1cec5..fd19262 100644 --- a/doc/descriptions/plustek_pp.desc +++ b/doc/descriptions/plustek_pp.desc @@ -5,8 +5,6 @@ :backend "plustek_pp" :version "0.43" :manpage "sane-plustek_pp" -; backend's web page -:url "http://www.gjaeger.de/scanner/plustek_pp/" :devicetype :scanner @@ -153,4 +151,3 @@ :interface "Parport (SPP, EPP)" :status :complete :comment "Reported as P12" - diff --git a/doc/descriptions/ricoh.desc b/doc/descriptions/ricoh.desc index b4928f2..bdaea31 100644 --- a/doc/descriptions/ricoh.desc +++ b/doc/descriptions/ricoh.desc @@ -26,4 +26,3 @@ :interface "SCSI" :status :basic ;:comment "?" - diff --git a/doc/descriptions/ricoh2.desc b/doc/descriptions/ricoh2.desc new file mode 100644 index 0000000..12a9b4c --- /dev/null +++ b/doc/descriptions/ricoh2.desc @@ -0,0 +1,43 @@ +; +; SANE Backend specification file +; +; It's basically emacs-lisp --- so ";" indicates comment to end of line. +; All syntactic elements are keyword tokens, followed by a string or +; keyword argument, as specified. +; +; ":backend" *must* be specified. +; All other information is optional (but what good is the file without it?). +; +; See doc/descriptions.txt for details. + +:backend "ricoh2" ; name of backend +:version "1.0" ; version of backend (or "unmaintained") +:manpage "sane-ricoh2" ; name of manpage (if it exists) +:url "http://www.ricoh.com/" ; backend's web page + +:devicetype :scanner ; start of a list of devices.... + ; other types: :stillcam, :vidcam, + ; :meta, :api + +:mfg "Ricoh" ; name a manufacturer +:url "http://www.ricoh.com/" ; manufacturer's URL + +:model "SG-3100SFNw" +:status :basic +:interface "USB" +:usbid "0x05ca" "0x0439" + +:model "SG-3100SNw" +:status :basic +:interface "USB" +:usbid "0x05ca" "0x0438" + +:model "SP-100SU" +:status :untested +:interface "USB" +:usbid "0x05ca" "0x042c" + +:model "SP-111SU/SP-112SU" +:status :basic +:interface "USB" +:usbid "0x05ca" "0x0448" diff --git a/doc/descriptions/rts8891.desc b/doc/descriptions/rts8891.desc index e37f158..7d5a63c 100644 --- a/doc/descriptions/rts8891.desc +++ b/doc/descriptions/rts8891.desc @@ -12,10 +12,10 @@ :backend "rts8891" ; name of backend :version "1.0-0 (unmaintained)" ; version of backend (or "unmaintained") :manpage "sane-rts8891" ; name of manpage (if it exists) -:url "http://stef.dev.free.fr/sane/rts8891/index.html" +:url "http://stef.dev.free.fr/sane/rts8891/index.html" ; backend's web page -:comment "This backend supports Realtek RTS8891 ASIC bases scanners." +:comment "This backend supports Realtek RTS8891 ASIC bases scanners." ; comment about the backend :devicetype :scanner ; start of a list of devices.... diff --git a/doc/descriptions/sceptre.desc b/doc/descriptions/sceptre.desc index aa4f515..e636bdb 100644 --- a/doc/descriptions/sceptre.desc +++ b/doc/descriptions/sceptre.desc @@ -18,13 +18,13 @@ :mfg "Sceptre" :url "http://www.sceptre.com/" -:model "Vividscan S1200" +:model "Vividscan S1200" :interface "SCSI" :status :basic :mfg "Komodo" :url "http://www.komodo.com/" -:model "S1200" +:model "S1200" :interface "SCSI" :status :untested :comment "rebadged Sceptre S1200" diff --git a/doc/descriptions/sharp.desc b/doc/descriptions/sharp.desc index 63000af..10349ba 100644 --- a/doc/descriptions/sharp.desc +++ b/doc/descriptions/sharp.desc @@ -1,7 +1,7 @@ :backend "sharp" ; name of backend :version "0.32 (unmaintained)" ; version of backend ;:status :beta ; :alpha, :beta, :stable, :new -:url "http://www.satzbau-gmbh.de/staff/abel/sane-sharp.html" +:url "http://www.satzbau-gmbh.de/staff/abel/sane-sharp.html" ; backend's homepage :manpage "sane-sharp" :devicetype :scanner diff --git a/doc/descriptions/sm3840.desc b/doc/descriptions/sm3840.desc index e40193f..75c499c 100644 --- a/doc/descriptions/sm3840.desc +++ b/doc/descriptions/sm3840.desc @@ -14,7 +14,7 @@ :version "1.1 (unmaintained)" ; version of backend (or "unmaintained") :manpage "sane-sm3840" ; name of manpage (if it exists) :url "http://www.ziplabel.com/sm3840/" ; backend's web page -:comment "This reverse-engineered backend supports the USB ScanMaker 3840 model" +:comment "This reverse-engineered backend supports the USB ScanMaker 3840 model" ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -52,5 +52,3 @@ ; and at the top-level. ; :status specifier is optional after :model and at the top-level - - diff --git a/doc/descriptions/tamarack.desc b/doc/descriptions/tamarack.desc index 731e6b8..7b52fd5 100644 --- a/doc/descriptions/tamarack.desc +++ b/doc/descriptions/tamarack.desc @@ -32,4 +32,3 @@ :interface "SCSI" :status :good :comment "3 pass, 600 DPI" - diff --git a/doc/descriptions/teco1.desc b/doc/descriptions/teco1.desc index e5b4132..1b37918 100644 --- a/doc/descriptions/teco1.desc +++ b/doc/descriptions/teco1.desc @@ -122,6 +122,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - - - diff --git a/doc/descriptions/teco3.desc b/doc/descriptions/teco3.desc index a2f3e92..0a84ab2 100644 --- a/doc/descriptions/teco3.desc +++ b/doc/descriptions/teco3.desc @@ -57,6 +57,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - - - diff --git a/doc/descriptions/template.desc. b/doc/descriptions/template.desc. index 25b9b5a..a6b6bab 100644 --- a/doc/descriptions/template.desc. +++ b/doc/descriptions/template.desc. @@ -17,7 +17,7 @@ :manpage "sane-template" ; name of manpage (if it exists) :url "http://www.luser.com/temp/" ; backend's web page :url "http://www.luser.com/b/" ; another backend webpage -:comment "This backend supports only the USB and SCSI models" +:comment "This backend supports only the USB and SCSI models" ; comment about the backend :devicetype :scanner ; start of a list of devices.... @@ -77,5 +77,3 @@ ; and at the top-level. ; :status specifier is optional after :model and at the top-level - - diff --git a/doc/descriptions/test.desc b/doc/descriptions/test.desc index 657c2ea..e0989f4 100644 --- a/doc/descriptions/test.desc +++ b/doc/descriptions/test.desc @@ -20,4 +20,3 @@ :desc "Frontend-tester" :comment "Backend for testing frontends. Also serves as example for SANE backend options." - diff --git a/doc/descriptions/u12.desc b/doc/descriptions/u12.desc index ccf37f0..81bed1c 100644 --- a/doc/descriptions/u12.desc +++ b/doc/descriptions/u12.desc @@ -5,8 +5,6 @@ :backend "u12" :version "0.02" :manpage "sane-u12" -; backend's web page -:url "http://www.gjaeger.de/scanner/u12/" :devicetype :scanner diff --git a/doc/descriptions/umax_pp.desc b/doc/descriptions/umax_pp.desc index e07a4a0..f95e82f 100644 --- a/doc/descriptions/umax_pp.desc +++ b/doc/descriptions/umax_pp.desc @@ -22,41 +22,41 @@ :mfg "UMAX" ; name a manufacturer :url "http://www.umax.com.tw/" -; These scanners are known to have the same ASIC family. +; These scanners are known to have the same ASIC family. :model "Astra 1220P" :interface "Parport (EPP/ECP)" -:status :good +:status :good :model "Astra 2000P" :interface "Parport (EPP/ECP)" -:status :good +:status :good :model "Astra 1600P" :interface "Parport (EPP/ECP)" -:status :good +:status :good :model "Astra 600P" :interface "Parport (SPP/ECP)" -:status :unsupported +:status :unsupported :comment "untested, but should be close to 610P" :model "Astra 610P" :interface "Parport (SPP/ECP)" -:status :good +:status :good :mfg "Hewlett-Packard" :model "Scanjet 3200C" :interface "Parport (EPP/ECP)" -:status :good +:status :good :comment "works (relabelled 1220P and 2000P)" :mfg "Genius" :model "ColorPage-Life Pro" :interface "Parport (EPP/ECP)" -:status :good +:status :good :comment "works (relabelled 1220P and 2000P)" ; :comment and :url specifiers are optional after :mfg, :model, :desc, diff --git a/doc/descriptions/unsupported.desc b/doc/descriptions/unsupported.desc index 2217594..e062682 100644 --- a/doc/descriptions/unsupported.desc +++ b/doc/descriptions/unsupported.desc @@ -10,7 +10,7 @@ :backend "unsupported" ; name of backend :version "2010-06-09" ; version of backend -:url "/contrib.html" +:url "contrib.html" ;:manpage "sane-mustek" ; name of manpage (if it exists) :comment "The devices mentioned here are not supported by any SANE backend. However, there may be links to information about them or stand-alone programs." @@ -21,14 +21,14 @@ :mfg "Agfa" :model "DuoScan f40" -:url "/unsupported/agfa-duoscan-f40.html" +:url "unsupported/agfa-duoscan-f40.html" :interface "USB IEEE-1394" :usbid "0x06bd" "0x02bf" :status :unsupported :comment "Unsupported. See link for details." :model "DuoScan T2000XL" -:url "/unsupported/agfa-duoscan-t2000xl.html" +:url "unsupported/agfa-duoscan-t2000xl.html" :interface "SCSI" :status :unsupported :comment "Unsupported. Same as Microtek ArtixScan 2020?" @@ -39,25 +39,25 @@ :comment "Unsupported. Same as Microtek Artixscan 2500f" :model "SnapScan 310P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :interface "Parport" :status :unsupported :comment "Unsupported, see link for details." :model "SnapScan EZ" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :interface "Parport" :status :unsupported :comment "Unsupported, see link for details." :model "SnapScan 1200P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :interface "Parport" :status :unsupported :comment "Unsupported, see link for details." :model "SnapScan 1212P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :interface "Parport" :status :unsupported :comment "Unsupported, see link for details." @@ -68,7 +68,7 @@ :url "http://www.artecusa.com/" :model "1236 USB" -:url "/unsupported/artec_1236usb.html" +:url "unsupported/artec_1236usb.html" :interface "USB" :usbid "0x05d8" "0x4001" :status :unsupported @@ -80,7 +80,7 @@ :comment "Unsupported. Chips found inside: AT015, AD9816JS. Maybe similar to SCSI version or as6e?" :model "Ultima 2000 (0x4001)" -:url "/unsupported/artec-ultima-2000-2.html" +:url "unsupported/artec-ultima-2000-2.html" :interface "USB" :usbid "0x05d8" "0x4001" :status :unsupported @@ -91,7 +91,7 @@ :mfg "Avigramm" :model "Minidoc" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "USB Parport" :usbid "0x05cb" "0x1483" :status :unsupported @@ -113,14 +113,14 @@ :comment "Not supported. No chipset information available. Same as UMAX Astra 6700." :model "iVina 1600" -:url "/unsupported/umax-astra-4500.html" +:url "unsupported/umax-astra-4500.html" :interface "USB" :usbid "0x0638" "0x0a10" :status :unsupported :comment "GL646 based, to be added to genesys backend. Same as UMAX Astra 4500." :model "iVina FB1800" -:url "/unsupported/umax-astra-4700.html" +:url "unsupported/umax-astra-4700.html" :interface "USB" :usbid "0x0638" "0x0a20" :status :unsupported @@ -134,49 +134,49 @@ :comment "Formerly Acer Peripherals" :model "310P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "320P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "340P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "610P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "610PT" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "620P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "620PT" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." :model "640P" -:url "/unsupported/acer-parport.html" +:url "unsupported/acer-parport.html" :status :unsupported :interface "Parport" :comment "Unsupported, see link for details." @@ -188,7 +188,7 @@ :comment "Unsupported." :model "5550" -:url "/unsupported/benq-5550.html" +:url "unsupported/benq-5550.html" :interface "USB" :usbid "0x04a5" "0x2211" :status :unsupported @@ -198,10 +198,10 @@ :interface "USB" :usbid "0x04a5" "0x2311" :status :unsupported -:url "http://lists.alioth.debian.org/pipermail/sane-devel/2009-January/023447.html" +:url "http://alioth-lists.debian.net/pipermail/sane-devel/2009-January/023447.html" :model "7400UT" -:url "/unsupported/benq-7400ut.html" +:url "unsupported/benq-7400ut.html" :interface "USB" :usbid "0x04a5" "0x2202" :status :unsupported @@ -211,7 +211,7 @@ :mfg "Boeder" :model "Sm@rtScan Office" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "Parport USB" :usbid "0x05cb" "0x1483" :status :unsupported @@ -223,7 +223,7 @@ :url "http://www.brother.com/" :model "MFC 2500" -:url "/unsupported/brother-mfc-2500.html" +:url "unsupported/brother-mfc-2500.html" :interface "USB" :usbid "0x04f9" "0x000a" :status :unsupported @@ -236,13 +236,13 @@ :comment "The parport 200x400dpi grayscale version of this scanner is unsupported. Dmitri Katchalov did some investigations on this scanner. If you want to write a backend, contact him (see link)." :model "MFC 7300c" -:url "/unsupported/brother-mfc-7300.html" +:url "unsupported/brother-mfc-7300.html" :interface "Parport USB" :usbid "0x04f9" "0x0106" :status :unsupported :model "MFC 9600" -:url "/unsupported/brother-mfc-9600.html" +:url "unsupported/brother-mfc-9600.html" :interface "USB" :usbid "0x04f9" "0x0101" :status :unsupported @@ -253,7 +253,7 @@ :url "http://www.c-channel.ch/" :model "MyPen Pro" -:url "/unsupported/c-channel-mypen-pro.html" +:url "unsupported/c-channel-mypen-pro.html" :interface "USB" ;:usbid "" "" :status :unsupported @@ -266,7 +266,7 @@ :comment "See bug #306792 for details." :model "MoneyPen II" -;:url "/unsupported/c-channel-mypen-pro.html" +;:url "unsupported/c-channel-mypen-pro.html" :interface "USB" ;:usbid "" "" :status :unsupported @@ -278,120 +278,98 @@ :url "http://www.canon.com/" :model "CanoScan 3000" -:url "/unsupported/canon-3000.html" +:url "unsupported/canon-3000.html" :interface "USB" :usbid "0x04a9" "0x2215" :status :unsupported :comment "GL660+GL646 based." :model "CanoScan 3000ex" -:url "/unsupported/canon-3000.html" +:url "unsupported/canon-3000.html" :interface "USB" :usbid "0x04a9" "0x2215" :status :unsupported :comment "GL660+GL646 based." :model "CanoScan 3000F" -:url "/unsupported/canon-3000.html" +:url "unsupported/canon-3000.html" :interface "USB" :usbid "0x04a9" "0x2215" :status :unsupported :comment "GL660+GL646 based, to be added to genesys backend" :model "CanoScan 4200F" -:url "/unsupported/canon-4200f.html" +:url "unsupported/canon-4200f.html" :interface "USB" :usbid "0x04a9" "0x221b" :status :unsupported :comment "Probably unsupported. See link." -:model "CanoScan 4400F" -:url "/unsupported/canon-4400.html" -:interface "USB" -:usbid "0x04a9" "0x2228" -:status :unsupported -:comment "GL843 based, to be added to genesys backend" - :model "CanoScan 5000F" -:url "/unsupported/canon-5000f.html" +:url "unsupported/canon-5000f.html" :interface "USB" :usbid "0x04a9" "0x2212" :status :unsupported :comment "Unsupported. See link for details." :model "CanoScan 5200F" -:url "/unsupported/canon-5200f.html" +:url "unsupported/canon-5200f.html" :interface "USB" :usbid "0x04a9" "0x2217" :status :unsupported :comment "Probably unsupported. See link for details." :model "CanoScan 8000F" -:url "/unsupported/canon-8000f.html" +:url "unsupported/canon-8000f.html" :interface "USB" :usbid "0x04a9" "0x220f" :status :unsupported :comment "Not supported. See link for more information. With transparency adapter." -:model "CanoScan 8400F" -:url "/unsupported/canon-8400f.html" -:interface "USB" -:usbid "0x04a9" "0x221e" -:status :unsupported -:comment "GL841 based, to be added to genesys backend" - -:model "CanoScan 8600F" -:url "/unsupported/canon-8600.html" -:interface "USB" -:usbid "0x04a9" "0x2229" -:status :unsupported -:comment "GL841 based, to be added to genesys backend" - - :model "CanoScan 9900F" -:url "/unsupported/canon-9900f.html" +:url "unsupported/canon-9900f.html" :interface "USB" :usbid "0x04a9" "0x2210" :status :unsupported :comment "Probably unsupported, similar to 8000F. 3200x6400 dpi USB2. With transparency adapter." :model "CanoScan 9950F" -:url "/unsupported/canon-9950f.html" +:url "unsupported/canon-9950f.html" :interface "USB" :usbid "0x04a9" "0x2219" :status :unsupported :comment "Probably unsupported." :model "CanoScan D646U" -:url "/unsupported/canon-d646u.html" +:url "unsupported/canon-d646u.html" :interface "USB" :usbid "0x04a9" "0x220b" :status :unsupported :comment "Probably not supported. See link for more information and test program." :model "CanoScan D646U ex" -:url "/unsupported/canon-d646u.html" +:url "unsupported/canon-d646u.html" :interface "USB" :usbid "0x04a9" "0x220b" :status :unsupported :comment "Probably not supported. See D646." :model "CanoScan D1230U" -:url "/unsupported/canon-d1230u.html" +:url "unsupported/canon-d1230u.html" :interface "USB" :usbid "0x04a9" "0x2209" :status :unsupported :comment "Probably not supported. " :model "CanoScan D1250U2" -:url "/unsupported/canon-d1250u2.html" +:url "unsupported/canon-d1250u2.html" :interface "USB" :usbid "0x04a9" "0x220c" :status :unsupported :comment "Not supported. However, someone started working on this scanner and some information is available (see link)." :model "CanoScan D2400UF" -:url "/unsupported/canon-d2400uf.html" +:url "unsupported/canon-d2400uf.html" :interface "USB" :usbid "0x04a9" "0x220a" :status :unsupported @@ -404,7 +382,7 @@ :comment "Probably not supported. No details known." :model "CanoScan FB620U" -:url "/unsupported/canon-fb620u.html" +:url "unsupported/canon-fb620u.html" :interface "USB" :usbid "0x04a9" "0x2202" :status :unsupported @@ -425,14 +403,14 @@ :comment "Philips chip. Backend started, see link" :model "CanoScan LiDE 90" -:url "/unsupported/canon-lide-90.html" +:url "unsupported/canon-lide-90.html" :interface "USB" :usbid "0x04a9" "0x1900" :status :unsupported :comment "Unsupported. See link for details." :model "CanoScan LiDE 500F" -:url "/unsupported/canon-canoscan-lide-500f.html" +:url "unsupported/canon-canoscan-lide-500f.html" :interface "USB" :usbid "0x04a9" "0x221f" :status :unsupported @@ -453,67 +431,67 @@ :comment "Philips chip. Backend started, see link" :model "FS4000" -:url "/unsupported/canon-fs4000.html" +:url "unsupported/canon-fs4000.html" :interface "USB SCSI" :usbid "0x04a9" "0x3042" :status :unsupported :comment "Not supported. See link for more details." :model "IS 12" -:url "/unsupported/canon-is-12.html" +:url "unsupported/canon-is-12.html" :interface "USB" :status :unsupported :comment "Probably not supported. Scanner cardridge for Canon inkjet printers." :model "IS 22" -:url "/unsupported/canon-is-22.html" +:url "unsupported/canon-is-22.html" :interface "Parport" :status :unsupported :comment "Probably not supported. Scanner cardridge for Canon inkjet printers." :model "IS 32" -:url "/unsupported/canon-is-32.html" +:url "unsupported/canon-is-32.html" :interface "USB" :usbid "0x04a9" "0x105d" :status :unsupported :comment "Probably not supported. Scanner cardridge for Canon inkjet printers." :model "IS 52" -:url "/unsupported/canon-is-52.html" +:url "unsupported/canon-is-52.html" :interface "USB" :status :unsupported :comment "Probably not supported. Scanner cardridge for Canon inkjet printers." :model "ImageRunner iR1018" -:url "/unsupported/canon-imagerunner.html" +:url "unsupported/canon-imagerunner.html" :interface "USB" :usbid "0x04a9" "0x269d" :status :unsupported :comment "Probably not supported. See link for details." :model "ImageRunner iR1022" -:url "/unsupported/canon-imagerunner.html" +:url "unsupported/canon-imagerunner.html" :interface "USB" :usbid "0x04a9" "0x269d" :status :unsupported :comment "Probably not supported. See link for details." :model "ImageRunner iR1023" -:url "/unsupported/canon-imagerunner.html" +:url "unsupported/canon-imagerunner.html" :interface "USB" :usbid "0x04a9" "0x269d" :status :unsupported :comment "Probably not supported. See link for details." :model "PIXMA MP110" -:url "/unsupported/canon-pixma-mp110.html" +:url "unsupported/canon-pixma-mp110.html" :interface "USB" :usbid "0x04a9" "0x1700" :status :unsupported :comment "Probably not supported. See link for details." :model "PIXMA MP130" -:url "/unsupported/canon-pixma-mp130.html" +:url "unsupported/canon-pixma-mp130.html" :interface "USB" :usbid "0x04a9" "0x1701" :status :unsupported @@ -528,7 +506,7 @@ :mfg "Chinon" :model "DS-3000" -:url "/unsupported/chinon-ds3000.html" +:url "unsupported/chinon-ds3000.html" :interface "Parport Serial Port" :status :unsupported :comment "Unsupported at the moment, but a backend is in preparation. See link." @@ -549,7 +527,7 @@ :mfg "Compeye" :model "Simplex 1236C" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "Parport USB" :usbid "0x05cb" "0x1483" :status :unsupported @@ -561,14 +539,14 @@ :url "http://www.cardscan.com/" :model "Cardscan 500" -:url "/unsupported/corex-cardscan-500.html" +:url "unsupported/corex-cardscan-500.html" :interface "USB" :usbid "0x08f0" "0x0001" :status :unsupported :comment "Probably not supported. Businesscard reader." :model "Cardscan 700 C" -:url "/unsupported/corex-cardscan-700.html" +:url "unsupported/corex-cardscan-700.html" :interface "USB" :usbid "0x08f0" "0x0004" :status :unsupported @@ -586,14 +564,14 @@ :comment "Probably rebadged Lexmark X5150. May work with sane-lexmark? See bug #312130" :model "A960" -:url "/unsupported/dell-a960.html" +:url "unsupported/dell-a960.html" :interface "USB" :usbid "0x413c" "0x5107" :status :unsupported :comment "Probably not supported. See link for details." :model "922" -:url "/unsupported/dell-922.html" +:url "unsupported/dell-922.html" :interface "USB" :usbid "0x413c" "0x5109" :status :unsupported @@ -617,7 +595,7 @@ :comment "Probably unsupported. No details known." :model "Stylus DX4450" -:url "/unsupported/epson-stylus-dx4450.html" +:url "unsupported/epson-stylus-dx4450.html" :interface "USB" :usbid "0x04b8" "0x083f" :status :unsupported @@ -634,7 +612,7 @@ :url "http://www.bizcardreader.com/" :model "BizCardReader 900C" -:url "/unsupported/edt-900c.html" +:url "unsupported/edt-900c.html" :interface "USB" :usbid "0x0a53" "0x5001" :status :unsupported @@ -689,6 +667,24 @@ :status :unsupported :comment "Genesys GL310 chipset, not supported by sane-genesys backend." +:model "ScanPartner SP25" +:interface "USB" +:status :unsupported +:usbid "0x04c5" "0x1409" +:comment "Possibly Genesys protocol?" + +:model "ScanPartner SP30" +:interface "USB" +:status :unsupported +:usbid "0x04c5" "0x140a" +:comment "Possibly Genesys protocol?" + +:model "ScanPartner SP30F" +:interface "USB" +:status :unsupported +:usbid "0x04c5" "0x140c" +:comment "Possibly Genesys protocol?" + ;******************************************************************************************** :mfg "Genius" @@ -696,41 +692,41 @@ :url "http://www.genius-kye.com/" :model "ColorPage CS" -:url "/unsupported/genius-colorpage-cs.html" +:url "unsupported/genius-colorpage-cs.html" :interface "SCSI" :status :unsupported :comment "Probably unsupported, see link for details." :model "ColorPage-Slim 1200 USB2" -:url "/unsupported/genius-colorpage-slim-1200-usb2.html" +:url "unsupported/genius-colorpage-slim-1200-usb2.html" :interface "USB" :usbid "0x0458" "0x2020" :status :unsupported :comment "GL841 based, to be added to genesys backend." :model "ColorPage HR6X Slim" -:url "/unsupported/genius-colorpage-hr6x.html" +:url "unsupported/genius-colorpage-hr6x.html" :interface "USB" :usbid "0x0458" "0x2019" :status :unsupported :comment "GL646 based, to be added to genesys backend" :model "ColorPage HR7X" -:url "/unsupported/genius-colorpage-hr7x.html" +:url "unsupported/genius-colorpage-hr7x.html" :interface "USB" :usbid "0x0458" "0x2018" :status :unsupported :comment "GL646 based, to be added to genesys backend" :model "ColorPage HR7XE" -:url "/unsupported/genius-colorpage-hr7xe.html" +:url "unsupported/genius-colorpage-hr7xe.html" :interface "USB" :usbid "0x06dc" "0x0012" :status :unsupported :comment "Unsuported. See link for details." :model "ColorPage HR8" -:url "/unsupported/genius-colorpage-hr8.html" +:url "unsupported/genius-colorpage-hr8.html" :interface "USB" :usbid "0x0458" "0x201c" :status :unsupported @@ -741,7 +737,7 @@ :mfg "Guillemot" ; name a manufacturer :model "SCAN@HOME 48 USB" -:url "/unsupported/teco-vm6509.html" +:url "unsupported/teco-vm6509.html" :interface "USB" :usbid "0x080d" "0x0102" :status :unsupported @@ -758,7 +754,7 @@ :mfg "Hercules" ; name a manufacturer :model "SCAN@HOME 48 USB" -:url "/unsupported/teco-vm6509.html" +:url "unsupported/teco-vm6509.html" :interface "USB" :usbid "0x080d" "0x0102" :status :unsupported @@ -771,7 +767,7 @@ :url "http://www.hp.com/" :model "Photo Scanner 1000" -:url "/unsupported/hp-photo-1000.html" +:url "unsupported/hp-photo-1000.html" :interface "USB" :usbid "0x03f0" "0x1001" :status :unsupported @@ -783,28 +779,28 @@ :comment "Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000?" :model "Photosmart S20 (C5101A)" -:url "/unsupported/hp-photosmart-s20xi.html" +:url "unsupported/hp-photosmart-s20xi.html" :interface "USB" :usbid "0x03f0" "0x0102" :status :unsupported :comment "Not supported yet by SANE. See link for details." :model "Photosmart S20xi (C7150A)" -:url "/unsupported/hp-photosmart-s20xi.html" +:url "unsupported/hp-photosmart-s20xi.html" :interface "USB" :usbid "0x03f0" "0x0102" :status :unsupported :comment "Not supported yet by SANE. See link for details." :model "Photosmart C5100 series" -:url "/unsupported/hp-photosmart-5100.html" +:url "unsupported/hp-photosmart-5100.html" :interface "USB" :usbid "0x03f0" "0x5811" :status :unsupported :comment "Not supported yet by SANE. See link for details." :model "Photosmart C3180" -:url "/unsupported/hp-photosmart-3180.html" +:url "unsupported/hp-photosmart-3180.html" :interface "USB" :usbid "0x03f0" "0x5611" :status :unsupported @@ -817,7 +813,7 @@ :comment "While an external binary-only backend exists, it works only on Linux i386. Therefore the scanner is unsupported on other platforms." :model "ScanJet 4600" -:url "/unsupported/hp-scanjet-4600.html" +:url "unsupported/hp-scanjet-4600.html" :interface "USB" :usbid "0x03f0" "0x3005" :comment "Not supported. See link for details, or http://www.chmil.org/hp4600linux/ for code" @@ -830,28 +826,28 @@ :status :unsupported :model "ScanJet 4890C" -:url "/unsupported/hp-scanjet-4850.html" +:url "unsupported/hp-scanjet-4850.html" :interface "USB" :usbid "0x03f0" "0x1b05" :comment "GL843, maybe can be added to genesys backend " :status :unsupported :model "ScanJet 5530C Photosmart" -:url "/unsupported/hp-scanjet-5530.html" +:url "unsupported/hp-scanjet-5530.html" :interface "USB" :usbid "0x03f0" "0x1605" :comment "Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend" :status :unsupported :model "ScanJet 8390" -:url "/unsupported/hp-scanjet-8390.html" +:url "unsupported/hp-scanjet-8390.html" :interface "USB" :usbid "0x03f0" "0x3805" :comment "Probably not supported. See link for details." :status :unsupported :model "ScanJet G4000" -:url "/unsupported/hp-g4000.html" +:url "unsupported/hp-g4000.html" :interface "USB" :usbid "0x03f0" "0x4505" :comment "Probably not supported. See link for details." @@ -873,7 +869,7 @@ :url "http://www.iomagic.com/" :model "MobileScan USB" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "USB Parport" :usbid "0x05cb" "0x1483" :status :unsupported @@ -885,21 +881,21 @@ :url "http://irislink.com/" :model "IriScan" -:url "/unsupported/iris-iriscan.html" +:url "unsupported/iris-iriscan.html" :interface "USB" :usbid "0x0a53" "0x1000" :status :unsupported :comment "Unsupported. LM9832/3. See link for details." :model "IRISPen Translator Executive" -:url "/unsupported/iris-irispen-translator.html" +:url "unsupported/iris-irispen-translator.html" :interface "USB" :usbid "0x0f43" "0x015a" :status :unsupported :comment "Unsupported. See link for details." :model "IRISCard Pro (IBCR II)" -:url "/unsupported/iris-business.html" +:url "unsupported/iris-business.html" :interface "USB" :usbid "0x0a38" "0x0301" :status :unsupported @@ -921,84 +917,84 @@ :url "http://www.lexmark.com/" :model "P6250" -:url "/unsupported/lexmark-p6250.html" +:url "unsupported/lexmark-p6250.html" :interface "USB" :usbid "0x043d" "0x0097" :status :unsupported :comment "Unsupported. See link for details." :model "Photo 3150" -:url "/unsupported/lexmark-3150.html" +:url "unsupported/lexmark-3150.html" :interface "USB" :usbid "0x043d" "0x007d" :status :unsupported :comment "Unsupported. See link for details." :model "X74" -:url "/unsupported/lexmark-x75.html" +:url "unsupported/lexmark-x75.html" :interface "USB" :usbid "0x043d" "0x0060" :status :unsupported :comment "Unsupported. See link for details." :model "X75" -:url "/unsupported/lexmark-x75.html" +:url "unsupported/lexmark-x75.html" :interface "USB" :usbid "0x043d" "0x0060" :status :unsupported :comment "Unsupported. See link for details." :model "X75 PrinTrio" -:url "/unsupported/lexmark-x75.html" +:url "unsupported/lexmark-x75.html" :interface "USB" :usbid "0x043d" "0x0060" :status :unsupported :comment "Unsupported. See link for details." :model "X83" -:url "/unsupported/lexmark-x83.html" +:url "unsupported/lexmark-x83.html" :interface "USB" :usbid "0x043d" "0x003d" :status :unsupported :comment "Unsupported. GL640." :model "X2330" -:url "/unsupported/lexmark-x2330.html" +:url "unsupported/lexmark-x2330.html" :interface "USB" :usbid "0x043d" "0x00bb" :status :unsupported :comment "Unsupported. See link for details." - + :model "X3450" -:url "/unsupported/lexmark-x3450.html" +:url "unsupported/lexmark-x3450.html" :interface "USB" :usbid "0x043d" "0x00f6" :status :unsupported :comment "Unsupported. See link for details." - + :model "X5130" -:url "/unsupported/lexmark-x5130.html" +:url "unsupported/lexmark-x5130.html" :interface "USB" :usbid "0x043d" "0x0065" :status :unsupported :comment "Unsupported." :model "X5150" -:url "/unsupported/lexmark-x5130.html" +:url "unsupported/lexmark-x5130.html" :interface "USB" :usbid "0x043d" "0x0065" :status :unsupported :comment "Probably unsupported. See link for details." :model "X5250" -:url "/unsupported/lexmark-x5250.html" +:url "unsupported/lexmark-x5250.html" :interface "USB" :usbid "0x043d" "0x0093" :status :unsupported :comment "Unsupported." :model "X6170" -:url "/unsupported/lexmark-x6170.html" +:url "unsupported/lexmark-x6170.html" :interface "USB" :usbid "0x043d" "0x0072" :status :unsupported @@ -1011,14 +1007,14 @@ :comment "Unsupported. See bug #310889 for details." :model "X7350" -:url "/unsupported/lexmark-x7350.html" +:url "unsupported/lexmark-x7350.html" :interface "USB" :usbid "0x043d" "0x00b8" :status :unsupported :comment "Unsupported. See link for details." :model "X8350" -:url "/unsupported/lexmark-x8350.html" +:url "unsupported/lexmark-x8350.html" :interface "USB" :usbid "0x043d" "0x00b9" :status :unsupported @@ -1035,7 +1031,7 @@ :comment "Most probably unsupported." :model "PageScan USB" -:url "/unsupported/logitech-pagescan-usb.html" +:url "unsupported/logitech-pagescan-usb.html" :interface "USB" :usbid "0x046d" "0x040f" :status :unsupported @@ -1048,42 +1044,42 @@ :url "http://www.medion.de/" :model "MD 6190" -:url "/unsupported/medion-md6190.html" +:url "unsupported/medion-md6190.html" :interface "USB" :usbid "0x0461" "0x0392" :status :unsupported :comment "Probably unsupported. There seem to exist two different scanners with that name. See link for details." :model "MD 6190" -:url "/unsupported/medion-md6190.html" +:url "unsupported/medion-md6190.html" :interface "USB" :usbid "0x0461" "0x037b" :status :unsupported :comment "Probably unsupported. There seem to exist two different scanners with that name. See link for details." :model "MD 40420" -:url "/unsupported/tevion-md40420.html" +:url "unsupported/tevion-md40420.html" :interface "USB" :usbid "0x05da" "0x3008" :status :unsupported :comment "Probably unsupported. See link for details." :model "MD 41260" -:url "/unsupported/medion-md6190.html" +:url "unsupported/medion-md6190.html" :interface "USB" :usbid "0x0461" "0x037b" :status :unsupported :comment "Probably unsupported. See link for details." :model "MD 41985" -:url "/unsupported/medion-md6190.html" +:url "unsupported/medion-md6190.html" :interface "USB" :usbid "0x0461" "0x037b" :status :unsupported :comment "Probably unsupported. See link for details." :model "MD 42666" -:url "/unsupported/tevion-md40420.html" +:url "unsupported/tevion-md40420.html" :interface "USB" :usbid "0x05da" "0x3008" :status :unsupported @@ -1097,21 +1093,21 @@ :comment "Fingerprint sensor. See link for details." :model "MD 90009" -:url "/unsupported/tevion-md90009.html" +:url "unsupported/tevion-md90009.html" :interface "USB" :usbid "0x05da" "0x30e5" :status :unsupported :comment "Probably unsupported. See link for details." :model "MD 90070" -:url "/unsupported/tevion-md90070.html" +:url "unsupported/tevion-md90070.html" :interface "USB" :usbid "0x05da" "0x3022" :status :unsupported :comment "Unsupported. See link for details." :model "MD 90090" -:url "/unsupported/tevion-md90070.html" +:url "unsupported/tevion-md90070.html" :interface "USB" :usbid "0x05da" "0x3022" :status :unsupported @@ -1123,28 +1119,28 @@ :url "http://www.memorex.com/" :model "6136u" -:url "/unsupported/memorex-maxx-6136u.html" +:url "unsupported/memorex-maxx-6136u.html" :interface "USB" :usbid "0x0461" "0x0346" :status :unsupported :comment "Probably unsupported." :model "6142u" -:url "/unsupported/visioneer-onetouch4400.html" +:url "unsupported/visioneer-onetouch4400.html" :interface "USB" :usbid "0x0461" "0x0347" :status :unsupported :comment "Probably unsupported. Same as Visioneer Onetouch 4400. See link for details." :model "MaxxScan 6122" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "USB Parport" :usbid "0x05cb" "0x1483" :status :unsupported :comment "Unsupported. See link for details." :model "SCF 9612P" -:url "/unsupported/memorex-scf-9612p.html" +:url "unsupported/memorex-scf-9612p.html" :interface "Parport" :status :unsupported :comment "Probably unsupported. See link for details." @@ -1159,7 +1155,7 @@ :comment "Unsupported. Same as Agfa DuoScan T2000XL?" :model "ArtixScanDI 2020" -:url "/unsupported/microtek-artixscan-2020.html" +:url "unsupported/microtek-artixscan-2020.html" :interface "USB" :usbid "0x05da" "0x202e" :status :unsupported @@ -1176,7 +1172,7 @@ :comment "Unsupported. Uses ALI M5611B." :model "FilmScan 35" -:url "/unsupported/microtek-filmscan-35.html" +:url "unsupported/microtek-filmscan-35.html" :interface "USB" :usbid "0x05e3" "0x0120" :status :unsupported @@ -1188,89 +1184,89 @@ :comment "Probably unsupported. Seems to be similar to the Microtek 330 CX and is detected by the microtek2 backend. Scanning doesn't seem to work however." :model "Scanmaker 1850S" -:url "/unsupported/microtek-scanmaker-1850s.html" +:url "unsupported/microtek-scanmaker-1850s.html" :interface "SCSI" :status :unsupported :comment "Unsupported. See link for details." :model "ScanMaker 3630" -:url "/unsupported/microtek-scanmaker-3630.html" +:url "unsupported/microtek-scanmaker-3630.html" :interface "USB" :usbid "0x0461" "0x0347" :status :unsupported :comment "Unsupported. Doesn't seem to be compatible to 3600 series, see link." :model "ScanMaker 3800" -:url "/unsupported/microtek-scanmaker-3800.html" +:url "unsupported/microtek-scanmaker-3800.html" :interface "USB" :usbid "0x05da" "0x30ce" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 3830" -:url "/unsupported/microtek-scanmaker-3830.html" +:url "unsupported/microtek-scanmaker-3830.html" :interface "USB" :usbid "0x05da" "0x30ce" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 3860" -:url "/unsupported/microtek-scanmaker-3880.html" +:url "unsupported/microtek-scanmaker-3880.html" :interface "USB" :usbid "0x05da" "0x3023" :status :unsupported :comment "Unsupported. See link for more details. Appears to be similar to ScanMaker 3880." :model "ScanMaker 3880" -:url "/unsupported/microtek-scanmaker-3880.html" +:url "unsupported/microtek-scanmaker-3880.html" :interface "USB" :usbid "0x05da" "0x3021" :status :unsupported :comment "Unsupported. SQ113 chip. See link for more details." :model "ScanMaker 4600" -:url "/unsupported/microtek-scanmaker-4600.html" +:url "unsupported/microtek-scanmaker-4600.html" :interface "USB" :usbid "0x05da" "0x40c7" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 4700" -:url "/unsupported/microtek-scanmaker-4700.html" +:url "unsupported/microtek-scanmaker-4700.html" :interface "USB" :usbid "0x05da" "0x20b4" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 4850" -:url "/unsupported/microtek-scanmaker-4900.html" +:url "unsupported/microtek-scanmaker-4900.html" :interface "USB" :usbid "0x05da" "0x30d9" :status :unsupported :comment "Probably unsupported. See link for details." :model "ScanMaker 4850 II" -:url "/unsupported/microtek-scanmaker-4850-2.html" +:url "unsupported/microtek-scanmaker-4850-2.html" :interface "USB" :usbid "0x05da" "0x3008" :status :unsupported :comment "Probably unsupported. See link for details." :model "ScanMaker 4900" -:url "/unsupported/microtek-scanmaker-4900.html" +:url "unsupported/microtek-scanmaker-4900.html" :interface "USB" :usbid "0x05da" "0x30b9" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 5" -:url "/unsupported/microtek-scanmaker-5600.html" +:url "unsupported/microtek-scanmaker-5600.html" :interface "SCSI" :status :unsupported :comment "Probably unsupported. See link for more details." :model "ScanMaker 5600" -:url "/unsupported/microtek-scanmaker-5600.html" +:url "unsupported/microtek-scanmaker-5600.html" :interface "USB" :usbid "0x05da" "0x20a7" :status :unsupported @@ -1283,49 +1279,49 @@ :comment "Unsupported. Uses ALI M5615 like the ScanMaker 4700." :model "ScanMaker 5800" -:url "/unsupported/microtek-scanmaker-5800.html" +:url "unsupported/microtek-scanmaker-5800.html" :interface "USB" :usbid "0x05da" "0x3008" :status :unsupported :comment "Unsupported. See link for details." :model "ScanMaker 5800" -:url "/unsupported/microtek-scanmaker-5800.html" +:url "unsupported/microtek-scanmaker-5800.html" :interface "USB" :usbid "0x05da" "0x30d8" :status :unsupported :comment "Unsupported. See link for details." :model "ScanMaker 5900" -:url "/unsupported/microtek-scanmaker-5900.html" +:url "unsupported/microtek-scanmaker-5900.html" :interface "USB" :usbid "0x05da" "0x30d8" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 5950" -:url "/unsupported/microtek-scanmaker-5950.html" +:url "unsupported/microtek-scanmaker-5950.html" :interface "USB" :usbid "0x05da" "0x30d8" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 6000" -:url "/unsupported/microtek-scanmaker-6000.html" +:url "unsupported/microtek-scanmaker-6000.html" :interface "USB" :usbid "0x05da" "0x30e5" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 6100" -:url "/unsupported/microtek-scanmaker-6100.html" +:url "unsupported/microtek-scanmaker-6100.html" :interface "USB" :usbid "0x05da" "0x30e5" :status :unsupported :comment "Unsupported. See link for more details." :model "ScanMaker 6700" -:url "/unsupported/microtek-scanmaker-6700.html" +:url "unsupported/microtek-scanmaker-6700.html" :interface "USB IEEE-1394" :usbid "0x05da" "0x20c9" :status :unsupported @@ -1333,7 +1329,7 @@ :model "ScanMaker 8700" :status :unsupported -:url "/unsupported/microtek-scanmaker-8700.html" +:url "unsupported/microtek-scanmaker-8700.html" :interface "USB IEEE-1394" :usbid "0x05da" "0x20b1" :comment "Unsupported. See link for details. USB vendor and product ids to be checked." @@ -1345,35 +1341,35 @@ :comment "Probably unsupported. SCSI seems to work with microtek2 backend." :model "ScanMaker 9800XL" -:url "/unsupported/microtek-scanmaker-9800.html" +:url "unsupported/microtek-scanmaker-9800.html" :interface "USB SCSI" :usbid "0x05da" "0x20de" :status :unsupported :comment "Partly unsupported. IEEE-1394 works with microtek2 backend. See link." :model "ScanMaker i320" -:url "/unsupported/microtek-scanmaker-i320.html" +:url "unsupported/microtek-scanmaker-i320.html" :interface "USB" :usbid "0x05da" "0x30e6" :status :unsupported :comment "Unsupported. See link." :model "ScanMaker s400" -:url "/unsupported/microtek-scanmaker-s400.html" +:url "unsupported/microtek-scanmaker-s400.html" :interface "USB" :usbid "0x05da" "0x201c" :status :unsupported :comment "Unsupported. See link." :model "ScanMaker S400" -:url "/unsupported/microtek-scanmaker-s400.html" +:url "unsupported/microtek-scanmaker-s400.html" :interface "USB" :usbid "0x05da" "0x300b" :status :unsupported :comment "Unsupported. See link." :model "ScanPort 3000" -:url "/unsupported/microtek-scanport-3000.html" +:url "unsupported/microtek-scanport-3000.html" :interface "USB" :usbid "0x04a7" "0x0224" :status :unsupported @@ -1386,35 +1382,35 @@ :url "http://www.konicaminolta.com/" :model "Dual Scan III" -:url "/unsupported/minolta-dual-scan-III.html" +:url "unsupported/minolta-dual-scan-III.html" :interface "USB" :usbid "0x0686" "0x400d" :status :unsupported :comment "Unsupported. May work with vuescan. See link for details." :model "Dual Scan IV" -:url "/unsupported/minolta-dual-scan-IV.html" +:url "unsupported/minolta-dual-scan-IV.html" :interface "USB" :usbid "0x132b" "0x000a" :status :unsupported :comment "Unsupported. Works with vuescan. See link for details." :model "DiMAGE Scan Elite 5400" -:url "/unsupported/minolta-dse-5400.html" +:url "unsupported/minolta-dse-5400.html" :interface "USB IEEE-1394" :usbid "0x0686" "0x400e" :status :unsupported :comment "Probably unsupported. May work with vuescan. See link for details." :model "DiMAGE Scan Elite 5400 2" -:url "/unsupported/minolta-dse-5400-2.html" +:url "unsupported/minolta-dse-5400-2.html" :interface "USB" :usbid "0x132b" "0x0012" :status :unsupported :comment "Probably unsupported. See link for details." :model "DiMAGE Scan Multi Pro" -:url "/unsupported/minolta-dimage-scan-multi-pro.html" +:url "unsupported/minolta-dimage-scan-multi-pro.html" :interface "IEEE-1394" :status :unsupported :comment "Probably unsupported. See link for details." @@ -1450,21 +1446,21 @@ :status :unsupported :model "BearPaw 2448 CU Pro" -:url "/unsupported/mustek-bearpaw-2448-cu-pro.html" +:url "unsupported/mustek-bearpaw-2448-cu-pro.html" :usbid "0x055f" "0x0408" :interface "USB" :comment "Not supported. May be supported by mustek_usb2 backend later. See link for some information." :status :unsupported :model "BearPaw 4800 TA Pro" -:url "/unsupported/mustek-bearpaw-4800ta-pro.html" +:url "unsupported/mustek-bearpaw-4800ta-pro.html" :interface "USB" :usbid "0x055f" "0x1000" :comment "Not supported. See link for some information." :status :unsupported :model "BearPaw 4800 TA Pro II" -:url "/unsupported/mustek-bearpaw-4800ta-pro-ii.html" +:url "unsupported/mustek-bearpaw-4800ta-pro-ii.html" :interface "USB" :usbid "0x055f" "0x040a" :comment "Not supported. May be supported by mustek_usb2 backend later. See link for some information." @@ -1521,7 +1517,7 @@ :comment "Probably unsupported. USB business card scanner. Maybe works as USB storage device?" :model "ScanMagic 9636P" -:url "http://lists.alioth.debian.org/pipermail/sane-devel/2003-May/007682.html" +:url "http://alioth-lists.debian.net/pipermail/sane-devel/2003-May/007682.html" :interface "Parport" :status :unsupported :comment "Probably not supported. Same as Mustek 12000 P?. ASIC 1505." @@ -1532,7 +1528,7 @@ :url "http://www.nevt.co.jp/" :model "Petiscan" -:url "/unsupported/nec-petiscan.html" +:url "unsupported/nec-petiscan.html" :interface "USB" :usbid "0x0475" "0x0100" :status :unsupported @@ -1544,7 +1540,7 @@ :url "http://www.nikon.com/" :model "LS-9000 ED" -:url "/unsupported/nikon-ls9000-ed.html" +:url "unsupported/nikon-ls9000-ed.html" :interface "IEEE-1394" :status :unsupported :comment "Probably not supported. See link for details. Possibly similar to LS-8000 ED." @@ -1555,7 +1551,7 @@ :url "http://www.olivetti.com" :model "Job-Jet M400" -:url "/unsupported/olivetti-job-jet-m400.html" +:url "unsupported/olivetti-job-jet-m400.html" :interface "USB" :usbid "0x0b3c" "0xa880" :status :unsupported @@ -1566,12 +1562,12 @@ :url "http://www.olympus.com" :model "ES-10P" -:url "http://lists.alioth.debian.org/pipermail/sane-devel/2008-December/023326.html" +:url "http://alioth-lists.debian.net/pipermail/sane-devel/2008-December/023326.html" :interface "Parport" :status :unsupported :model "ES-10S" -:url "/unsupported/olympus-es10s.html" +:url "unsupported/olympus-es10s.html" :interface "SCSI" :status :unsupported :comment "Probably not supported. See link for details." @@ -1696,7 +1692,7 @@ :mfg "Pentax" :model "DSmobile USB" -:url "/unsupported/syscan-travelscan-pro.html" +:url "unsupported/syscan-travelscan-pro.html" :interface "USB" :usbid "0x0a82" "0x2000" :status :unsupported @@ -1709,7 +1705,7 @@ :comment "Pacific Image Electronics" :model "Primefilm 1800u" -:url "/unsupported/pie-1800u.html" +:url "unsupported/pie-1800u.html" :interface "USB" :usbid "0x05e3" "0x0120" :status :unsupported @@ -1718,7 +1714,7 @@ :model "Primefilm 2700" :interface "USB" :status :unsupported -:url "http://lists.alioth.debian.org/pipermail/sane-devel/2009-January/023442.html" +:url "http://alioth-lists.debian.net/pipermail/sane-devel/2009-January/023442.html" :model "Primefilm 3600PRO" :interface "USB IEEE-1394" @@ -1726,14 +1722,14 @@ :comment "Probably not supported. " :model "Powerslide 3600" -:url "/unsupported/reflecta-digitdia-3600.html" +:url "unsupported/reflecta-digitdia-3600.html" :interface "USB IEEE-1394" :usbid "0x05e3" "0x0142" :status :unsupported :comment "Probably unsupported. Film scanner that can scan directly from the magazine." :model "PF3650 Pro3 Film Scanner" -:url "/unsupported/pie-pf3650.html" +:url "unsupported/pie-pf3650.html" :interface "USB IEEE-1394" :usbid "0x05e3" "0x0143" :status :unsupported @@ -1750,18 +1746,12 @@ :url "http://www.plustek.com/" :model "OpticFilm 7200" -:url "/unsupported/plustek-opticfilm-7200.html" +:url "unsupported/plustek-opticfilm-7200.html" :interface "USB" :usbid "0x07b3" "0x0807" :status :unsupported :comment "GL842 based, maybe to be added to genesys backend" -:model "OpticFilm 7200i" -:interface "USB" -:usbid "0x07b3" "0x0c04" -:status :unsupported -:comment "GL843 based, maybe to be added to genesys backend" - :model "OpticPro A3U" :interface "USB" :status :unsupported @@ -1773,21 +1763,21 @@ :comment "Uses RealTek chipset (RTL8801D)" :model "OpticPro S12" -:url "/unsupported/plustek-opticpro-st12.html" +:url "unsupported/plustek-opticpro-st12.html" :interface "USB" :usbid "0x07b3" "0x0600" :status :unsupported :comment "Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend." :model "OpticPro ST12" -:url "/unsupported/plustek-opticpro-st12.html" +:url "unsupported/plustek-opticpro-st12.html" :interface "USB" :usbid "0x07b3" "0x0600" :status :unsupported :comment "Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend." :model "OpticPro ST16" -:url "/unsupported/plustek-opticpro-st16.html" +:url "unsupported/plustek-opticpro-st16.html" :interface "USB" :usbid "0x07b3" "0x0600" :status :unsupported @@ -1799,14 +1789,14 @@ :comment "Probably LM983x based." :model "OpticPro S24" -:url "/unsupported/plustek-opticpro-st24.html" +:url "unsupported/plustek-opticpro-st24.html" :interface "USB" :usbid "0x07b3" "0x0601" :status :unsupported :comment "Product id 0x0601 is unsupported but may be supported by the genesys backend in future /GL646). Product id 0x040e is supported by the gt68xx backend." :model "OpticPro ST24" -:url "/unsupported/plustek-opticpro-st24.html" +:url "unsupported/plustek-opticpro-st24.html" :interface "USB" :usbid "0x07b3" "0x0601" :status :unsupported @@ -1814,83 +1804,83 @@ :model "OpticPro S28" :interface "USB" -:url "/unsupported/plustek-opticpro-s28.html" +:url "unsupported/plustek-opticpro-s28.html" :usbid "0x07b3" "0x0801" :status :unsupported :comment "GL841 based, to be added to genesys backend" :model "OpticPro ST28" -:url "/unsupported/plustek-opticpro-s28.html" +:url "unsupported/plustek-opticpro-s28.html" :interface "USB" :usbid "0x07b3" "0x0801" :status :unsupported :comment "GL841 based, to be added to genesys backend" :model "OpticPro ST28" -:url "/unsupported/plustek-opticpro-st28.html" +:url "unsupported/plustek-opticpro-st28.html" :interface "USB" :usbid "0x07b3" "0x0802" :status :unsupported :comment "GL841 based, to be added to genesys backend" :model "Umax AstraScan 4750" -:url "/unsupported/umax-astrscan-4750.html" +:url "unsupported/umax-astrscan-4750.html" :interface "USB" :usbid "0x07b3" "0x0802" :status :unsupported :comment "GL841 based, to be added to genesys backend, rebadged Plustek ST28" :model "OpticPro ST48" -:url "/unsupported/plustek-opticpro-st48.html" +:url "unsupported/plustek-opticpro-st48.html" :interface "USB" :usbid "0x07b3" "0x0800" :status :unsupported :comment "GL841 based, to be added to genesys backend" :model "OpticPro ST64" -:url "/unsupported/plustek-opticpro-st64.html" +:url "unsupported/plustek-opticpro-st64.html" :interface "USB" :usbid "0x07b3" "0x0c00" :status :unsupported :comment "GL843 based, maybe to be added to genesys backend" :model "OpticPro ST64+" -:url "/unsupported/plustek-opticpro-st64plus.html" +:url "unsupported/plustek-opticpro-st64plus.html" :interface "USB" :usbid "0x07b3" "0x0c03" :status :unsupported :comment "GL843 based. See link for more details." :model "PL 806" -:url "/unsupported/plustek-pl806.html" +:url "unsupported/plustek-pl806.html" :interface "USB" :usbid "0x07b3" "0x0c0c" :status :unsupported :comment "Unsupported. See link for more details." :model "SmartOffice PL 812" -:url "/unsupported/plustek-pl812.html" +:url "unsupported/plustek-pl812.html" :interface "USB" :usbid "0x07b3" "0x0c0d" :status :unsupported :comment "Unsupported. See link for more details." :model "OpticSlim 500" -:url "/unsupported/plustek-opticslim-500.html" +:url "unsupported/plustek-opticslim-500.html" :interface "USB" :usbid "0x07b3" "0x0458" :status :unsupported :comment "Unsupported. See link for more details." :model "OpticSlim 2420" -:url "/unsupported/plustek-opticslim-2420.html" +:url "unsupported/plustek-opticslim-2420.html" :interface "USB" :usbid "0x07b3" "0x0806" :status :unsupported :comment "GL841 based, to be added to genesys backend" :model "OpticSlim 2420+" -:url "/unsupported/plustek-opticslim-2420plus.html" +:url "unsupported/plustek-opticslim-2420plus.html" :interface "USB" :usbid "0x07b3" "0x0914" :status :unsupported @@ -1907,7 +1897,7 @@ :comment "Business card reader. No further information available." :model "ScanCopy 115" -:url "/unsupported/plustek-scancopy-115.html" +:url "unsupported/plustek-scancopy-115.html" :interface "USB" :usbid "0x07b3" "0x081c" :status :unsupported @@ -1966,7 +1956,7 @@ :comment "Probably not supported. No details known." :model "DocuPen R700" -:url "/unsupported/planon-docupen-r700.html" +:url "unsupported/planon-docupen-r700.html" :interface "USB" :usbid "0x10c4" "0xea60" :status :unsupported @@ -1983,7 +1973,7 @@ :url "http://www.primax.nl/" :model "Colorado 600U" -:url "/unsupported/primax-colorado-600u.html" +:url "unsupported/primax-colorado-600u.html" :interface "USB" :usbid "0x0461" "0x0341" :status :unsupported @@ -2002,7 +1992,7 @@ :comment "Probably unsupported. No details known." :model "Primascan Colorado 2600u" -:url "/unsupported/visioneer-onetouch4400.html" +:url "unsupported/visioneer-onetouch4400.html" :interface "USB" :usbid "0x0461" "0x0347" :status :unsupported @@ -2021,7 +2011,7 @@ :comment "Not supported. However, a stand-alone program is available." :model "Colorado USB 9600" -:url "/unsupported/primax-colorado-usb-9600.html" +:url "unsupported/primax-colorado-usb-9600.html" :interface "USB" :usbid "0x0461" "0x0340" :status :unsupported @@ -2086,7 +2076,7 @@ :comment "Maybe GL646. Maybe similar to Medion MD 6228?" :model "Onetouch 8920" -:url "/unsupported/visioneer-onetouch8920.html" +:url "unsupported/visioneer-onetouch8920.html" :interface "USB" :usbid "0x0461" "0x0371" :status :unsupported @@ -2098,7 +2088,7 @@ :url "http://www.fida.com/" :model "Winscan Pro 2448U" -:url "/unsupported/prolink-2448u.html" +:url "unsupported/prolink-2448u.html" :interface "USB" :usbid "0x06dc" "0x0014" :status :unsupported @@ -2129,21 +2119,21 @@ :mfg "Reflecta" :model "DigitDia 3600" -:url "/unsupported/reflecta-digitdia-3600.html" +:url "unsupported/reflecta-digitdia-3600.html" :interface "USB IEEE-1394" :usbid "0x05e3" "0x0142" :status :unsupported :comment "Film scanner that can scan directly from the magazine." :model "iScan 1800" -:url "/unsupported/reflecta-iscan-1800.html" +:url "unsupported/reflecta-iscan-1800.html" :interface "USB" :usbid "0x05e3" "0x0120" :status :unsupported :comment "Probably unsupported. See link for details." :model "ProScan 4000" -:url "/unsupported/reflecta-proscan-4000.html" +:url "unsupported/reflecta-proscan-4000.html" :interface "USB IEEE-1394" :usbid "0x05e3" "0x0143" :status :unsupported @@ -2154,21 +2144,21 @@ :mfg "Relisys" :model "Eclipse 1200U" -:url "/unsupported/relisys-eclipse-1200u.html" +:url "unsupported/relisys-eclipse-1200u.html" :interface "USB" :usbid "0x0475" "0x0103" :status :unsupported :comment "Probably unsupported. See link for details." :model "Scorpio Ultra 3" -:url "/unsupported/relisys-scorpio-ultra3.html" +:url "unsupported/relisys-scorpio-ultra3.html" :interface "USB" :usbid "0x0475" "0x0210" :status :unsupported :comment "Probably unsupported. See link for details." :model "Episode" -:url "/unsupported/relisys-episode.html" +:url "unsupported/relisys-episode.html" :interface "USB" :usbid "0x0475" "0x0103" :status :unsupported @@ -2184,7 +2174,7 @@ :mfg "Samsung" :model "SCX-4725FN" -:url "/unsupported/samsung-scx-4725.html" +:url "unsupported/samsung-scx-4725.html" :interface "USB" :usbid "0x04e8" "0x341f" :status :unsupported @@ -2195,7 +2185,7 @@ :mfg "Scanshell" :model "800N" -:url "/unsupported/scanshell-800n.html" +:url "unsupported/scanshell-800n.html" :interface "USB" :usbid "0x0a82" "0x6605" :status :unsupported @@ -2265,14 +2255,14 @@ :mfg "Syscan" :model "TravelScan FS-531" -:url "/unsupported/syscan-travelscan-fs531.html" +:url "unsupported/syscan-travelscan-fs531.html" :interface "USB" :usbid "0x0a82" "0x0530" :status :unsupported :comment "Not supported. May work with the Plustek backend in future. See link for details." :model "TravelScan Pro" -:url "/unsupported/syscan-travelscan-pro.html" +:url "unsupported/syscan-travelscan-pro.html" :interface "USB" :usbid "0x0a82" "0x2000" :status :unsupported @@ -2295,7 +2285,7 @@ :comment "Unsupported at the moment. See link for a project for that scanner." :model "Artiscan 2400FS" -:url "/unsupported/tamarack-artiscan-2400.html" +:url "unsupported/tamarack-artiscan-2400.html" :interface "USB" :usbid "0x05e3" "0x0100" :status :unsupported @@ -2308,7 +2298,7 @@ :url "http://www.tce.com.br/" :model "MK600U" -:url "/unsupported/memorex-maxx-6136u.html" +:url "unsupported/memorex-maxx-6136u.html" :interface "USB" :usbid "0x0461" "0x0346" :status :unsupported @@ -2326,7 +2316,7 @@ :url "http://www.tecoimage.com.tw/" :model "VM6509F" -:url "/unsupported/teco-vm6509.html" +:url "unsupported/teco-vm6509.html" :interface "USB" :usbid "0x080d" "0x0102" :status :unsupported @@ -2337,7 +2327,7 @@ :mfg "Tiny" :model "FU661E" -:url "/unsupported/visioneer-onetouch4400.html" +:url "unsupported/visioneer-onetouch4400.html" :interface "USB" :usbid "0x0461" "0x0347" :status :unsupported @@ -2349,19 +2339,19 @@ :url "http://www.trust-site.com" :model "CombiScan 19200" -:url "/unsupported/trust-combiscan-19200.html" +:url "unsupported/trust-combiscan-19200.html" :interface "Parport USB" :usbid "0x05cb" "0x1483" :status :unsupported :comment "Unsupported. See link for details." :model "EasyScan 19200" -:url "http://lists.alioth.debian.org/pipermail/sane-devel/2008-October/022955.html" +:url "http://alioth-lists.debian.net/pipermail/sane-devel/2008-October/022955.html" :interface "Parport" :status :unsupported :model "SCSI Scan 19200 -Excellence Series-" -:url "/unsupported/trust-scsi-scan-19200.html" +:url "unsupported/trust-scsi-scan-19200.html" :interface "SCSI" :status :unsupported :comment "Unsupported. See link for details." @@ -2372,49 +2362,49 @@ :url "http://www.umax.com/" :model "Astra 2500" -:url "/unsupported/umax-astra-2500.html" +:url "unsupported/umax-astra-2500.html" :interface "USB" :usbid "0x0461" "0x0374" :status :unsupported :comment "Probably not supported. See link for details." :model "Astra 2850" -:url "/unsupported/plustek-opticpro-st24.html" +:url "unsupported/plustek-opticpro-st24.html" :interface "USB" :usbid "0x07b3" "0x0601" :status :unsupported :comment "Probably not supported. Same IDs as Plustek OpticPro ST24. See link for details." :model "Astra 3000" -:url "/unsupported/umax-astra-3000.html" +:url "unsupported/umax-astra-3000.html" :interface "USB" :usbid "0x0461" "0x038a" :status :unsupported :comment "Probably not supported. See link for details." :model "Astra 3600" -:url "/unsupported/umax-astra-3600.html" +:url "unsupported/umax-astra-3600.html" :interface "USB" :usbid "0x0461" "0x038a" :status :unsupported :comment "Probably not supported. See link for details." :model "Astra 4000" -:url "/unsupported/umax-astra-4000.html" +:url "unsupported/umax-astra-4000.html" :interface "USB" :usbid "0x1606" "0x1030" :status :unsupported :comment "Not supported. See link for details." :model "Astra 4100" -:url "/unsupported/umax-astra-4100.html" +:url "unsupported/umax-astra-4100.html" :interface "USB" :usbid "0x0461" "0x038c" :status :unsupported :comment "Not supported, to be added to genesys backend." :model "Astra 4500" -:url "/unsupported/umax-astra-4500.html" +:url "unsupported/umax-astra-4500.html" :interface "USB" :usbid "0x0638" "0x0a10" :status :unsupported @@ -2426,7 +2416,7 @@ :comment "Probably not supported, no details known." :model "Astra 4700" -:url "/unsupported/umax-astra-4700.html" +:url "unsupported/umax-astra-4700.html" :interface "USB" :usbid "0x0638" "0x0a20" :status :unsupported @@ -2439,21 +2429,21 @@ :comment "Not supported. No chipset information available. Same as Avision iVina FB2400." :model "AstraSlim" -:url "/unsupported/umax-astraslim.html" +:url "unsupported/umax-astraslim.html" :usbid "0x080d" "0x0104" :interface "USB" :status :unsupported :comment "Probably not supported currently. See link for more details." :model "AstraSlim 1200" -:url "/unsupported/umax-astraslim-1200.html" +:url "unsupported/umax-astraslim-1200.html" :interface "USB" :usbid "0x080d" "0x0110" :status :unsupported :comment "See link for more details." :model "AstraSlim 6000" -:url "/unsupported/umax-astraslim-6000.html" +:url "unsupported/umax-astraslim-6000.html" :interface "USB" :usbid "0x080d" "0x0104" :status :unsupported @@ -2465,7 +2455,7 @@ :comment "Probably not supported. No details known.." :model "Powerlook 180" -:url "/unsupported/umax-powerlook-180.html" +:url "unsupported/umax-powerlook-180.html" :interface "USB" ;:usbid "0x3902" "0xc470" #correct? :status :unsupported @@ -2481,7 +2471,7 @@ :mfg "Vantas" :model "3000" -:url "/unsupported/visioneer-onetouch4800.html" +:url "unsupported/visioneer-onetouch4800.html" :interface "USB" :usbid "0x04a7" "0x0224" :status :unsupported @@ -2505,35 +2495,35 @@ :comment "Not supported. Id is from Primax? Yet another scanner with the same name?" :model "9420" -:url "/unsupported/visioneer-9420.html" +:url "unsupported/visioneer-9420.html" :interface "USB" :usbid "0x0461" "0x03a8" :status :unsupported :comment "Unsupported. See link for details." :model "9450 USB" -:url "/unsupported/visioneer-9450-usb.html" +:url "unsupported/visioneer-9450-usb.html" :interface "USB" :usbid "0x04a7" "0x0421" :status :unsupported :comment "Unsupported. See link for details." :model "Onetouch 4400" -:url "/unsupported/visioneer-onetouch4400.html" +:url "unsupported/visioneer-onetouch4400.html" :interface "USB" :usbid "0x0461" "0x0347" :status :unsupported :comment "Not supported. E5 chipset? See link for more details." :model "OneTouch 4800 USB" -:url "/unsupported/visioneer-onetouch4800.html" +:url "unsupported/visioneer-onetouch4800.html" :interface "USB" :usbid "0x04a7" "0x0224" :status :unsupported :comment "Unsupported. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details." :model "OneTouch 5300 USB" -:url "/unsupported/visioneer-onetouch5300.html" +:url "unsupported/visioneer-onetouch5300.html" :interface "USB" :usbid "0x04a7" "0x0226" :status :unsupported @@ -2546,98 +2536,98 @@ :comment "Not supported. Yet another scanner with this name?" :model "OneTouch 5800 USB" -:url "/unsupported/visioneer-onetouch5800.html" +:url "unsupported/visioneer-onetouch5800.html" :interface "USB" :usbid "0x04a7" "0x0226" :status :unsupported :comment "Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C." :model "OneTouch 6600" -:url "/unsupported/visioneer-onetouch6600.html" +:url "unsupported/visioneer-onetouch6600.html" :interface "USB" :usbid "0x04a7" "0x022a" :status :unsupported :comment "Unsupported. See link for details." :model "Onetouch 7100" -:url "/unsupported/visioneer-onetouch7100.html" +:url "unsupported/visioneer-onetouch7100.html" :interface "USB" :usbid "0x04a7" "0x0229" :status :unsupported :comment "GL646 based, to be added to genesys backend" :model "Onetouch 7700" -:url "/unsupported/visioneer-onetouch7700.html" +:url "unsupported/visioneer-onetouch7700.html" :interface "USB" :usbid "0x04a7" "0x0380" :status :unsupported :comment "LM9832/3 based, to be added to plustek backend" :model "OneTouch 8100" -:url "/unsupported/visioneer-onetouch8100.html" +:url "unsupported/visioneer-onetouch8100.html" :interface "USB" :usbid "0x04a7" "0x0321" :status :unsupported :comment "Unsupported. See link for details." :model "Onetouch 8700" -:url "/unsupported/visioneer-onetouch8920.html" +:url "unsupported/visioneer-onetouch8920.html" :interface "USB" :usbid "0x04a7" "0x0371" :status :unsupported :comment "Not supported. See link for details." :model "Onetouch 8900" -:url "/unsupported/visioneer-onetouch8920.html" +:url "unsupported/visioneer-onetouch8920.html" :interface "USB" :usbid "0x04a7" "0x0371" :status :unsupported :comment "Not supported. Same as 8920 but without TA?" :model "Onetouch 8920" -:url "/unsupported/visioneer-onetouch8920.html" +:url "unsupported/visioneer-onetouch8920.html" :interface "USB" :usbid "0x04a7" "0x0371" :status :unsupported :comment "Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices." :model "Onetouch 9000" -:url "/unsupported/visioneer-onetouch9020.html" +:url "unsupported/visioneer-onetouch9020.html" :interface "USB" :usbid "0x04a7" "0x022c" :status :unsupported :comment "Not supported. See link for details." :model "Onetouch 9020" -:url "/unsupported/visioneer-onetouch9020.html" +:url "unsupported/visioneer-onetouch9020.html" :interface "USB" :usbid "0x04a7" "0x022c" :status :unsupported :comment "Not supported. See link for details." :model "Onetouch 9320" -:url "/unsupported/visioneer-onetouch9320.html" +:url "unsupported/visioneer-onetouch9320.html" :interface "USB" :usbid "0x04a7" "0x0362" :status :unsupported :comment "Probably not supported. See link for details." :model "Onetouch Pro 8800" -:url "/unsupported/visioneer-onetouch8820.html" +:url "unsupported/visioneer-onetouch8820.html" :interface "USB" :usbid "0x04a7" "0x0410" :status :unsupported :comment "Probably not supported. See link for details." :model "Onetouch Pro 8820" -:url "/unsupported/visioneer-onetouch8820.html" +:url "unsupported/visioneer-onetouch8820.html" :interface "USB" :usbid "0x04a7" "0x0410" :status :unsupported :comment "Probably not supported. See link for details." :model "PaperPort 3100b" -:url "/unsupported/visioneer-paperport-3100b.html" +:url "unsupported/visioneer-paperport-3100b.html" :interface "Parport" :status :unsupported :comment "Most probably not supported. See link for details." @@ -2648,13 +2638,13 @@ :comment "Most probably not supported. More details would be appreciated." :model "PaperPort OneTouch" -:url "/unsupported/visioneer-paperport-onetouch.html" +:url "unsupported/visioneer-paperport-onetouch.html" :interface "Parport" :status :unsupported :comment "Most probably not supported. See link for details." :model "Strobe Pro USB" -:url "/unsupported/visioneer-strobe-pro-usb.html" +:url "unsupported/visioneer-strobe-pro-usb.html" :interface "USB" :usbid "0x04a7" "0x0102" :status :unsupported @@ -2663,82 +2653,82 @@ ;******************************************************************************************** :model "4800 One Touch" -:url "/unsupported/xerox-4800-onetouch.html" +:url "unsupported/xerox-4800-onetouch.html" :interface "USB" :usbid "0x04a7" "0x03a0" :status :unsupported :comment "Unsupported. See link for details. Different id compared to One Touch 4800?" :model "DocuImage 620S" -:url "/unsupported/xerox-docuimage-620s.html" +:url "unsupported/xerox-docuimage-620s.html" :interface "SCSI" :status :unsupported :comment "Not supported. See link for more details." :model "DocuMate 510" -:url "/unsupported/xerox-documate-510.html" +:url "unsupported/xerox-documate-510.html" :interface "USB" :status :unsupported :usbid "0x04a7" "0x0446" :comment "Not supported. See link for more details." :model "DocuMate 510" -:url "/unsupported/xerox-documate-510.html" +:url "unsupported/xerox-documate-510.html" :interface "USB" :status :unsupported :usbid "0x04a7" "0x047c" :comment "Not supported. See link for more details. Yet another USB id." :model "One Touch 4800" -:url "/unsupported/visioneer-onetouch4800.html" +:url "unsupported/visioneer-onetouch4800.html" :interface "USB" :usbid "0x04a7" "0x0224" :status :unsupported :comment "Unsupported. See link for details. Different id compared to 4800 One Touch?" :model "WorkCentre 470cx" -:url "/unsupported/xerox-workcentre-470cx.html" +:url "unsupported/xerox-workcentre-470cx.html" :interface "Parport" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre M15i" -:url "/unsupported/xerox-workcentre-m15i.html" +:url "unsupported/xerox-workcentre-m15i.html" :interface "USB" :usbid "0x0924" "0xffef" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre XK35c" -:url "/unsupported/xerox-workcentre-xk35c.html" +:url "unsupported/xerox-workcentre-xk35c.html" :interface "USB Parport" :usbid "0x043d" "0x0020" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre XK50cx" -:url "/unsupported/xerox-workcentre-xk50cx.html" +:url "unsupported/xerox-workcentre-xk50cx.html" :interface "USB" :usbid "0x04e8" "0x3903" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre Pro 412" -:url "/unsupported/xerox-workcentre-pro412.html" +:url "unsupported/xerox-workcentre-pro412.html" :interface "USB Parport" :usbid "0x043d" "0x4303" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre PE16" -:url "/unsupported/xerox-workcentre-pe16.html" +:url "unsupported/xerox-workcentre-pe16.html" :interface "USB Parport" :usbid "0x0924" "0x4220" :status :unsupported :comment "Not supported. See link for more details." :model "WorkCentre PE120i" -:url "/unsupported/xerox-workcentre-pe120i.html" +:url "unsupported/xerox-workcentre-pe120i.html" :interface "USB" :usbid "0x0924" "0x4237" :status :unsupported @@ -2754,7 +2744,7 @@ :mfg "Biolux" :model "654 (micrOcular)" -:url "/unsupported/biolux-654.html" +:url "unsupported/biolux-654.html" :interface "USB" :usbid "0x0923" "0x010f" :status :unsupported @@ -2766,7 +2756,7 @@ :mfg "Grandtek Scopecam" :model "8x30 Binocular & Digital Camera" -:url "/unsupported/grandtech-scopecam.html" +:url "unsupported/grandtech-scopecam.html" :interface "USB" :usbid "0x0797" "0x801c" :status :unsupported @@ -2778,4 +2768,3 @@ ; :comment and :url specifiers are optional after :mfg, :model, :desc, ; and at the top-level. - diff --git a/doc/descriptions/xerox_mfp.desc b/doc/descriptions/xerox_mfp.desc index dd9d283..46c2867 100644 --- a/doc/descriptions/xerox_mfp.desc +++ b/doc/descriptions/xerox_mfp.desc @@ -6,17 +6,18 @@ :mfg "Xerox" :url "http://www.office.xerox.com/" -:model "Phaser 6110MFP" -:interface "USB" -:usbid "0x0924" "0x3d5d" -:status :good - :model "Phaser 3200MFP" :interface "USB" :usbid "0x0924" "0x3da4" +:comment "All these models are turned out to be rebranded Samsungs." :status :complete :url "http://www.office.xerox.com/multifunction-printer/multifunction-under-30ppm/phaser-3200mfp/spec-enus.html" +:model "Phaser 6110MFP" +:interface "USB" +:usbid "0x0924" "0x3d5d" +:status :good + :model "WorkCentre 3119 Series" :interface "USB" :usbid "0x0924" "0x4265" @@ -86,7 +87,7 @@ :model "SCX-4x16" :interface "USB" :usbid "0x04e8" "0x3409" -:status :untested +:status :unsupported :model "SCX-6x20" :interface "USB" @@ -279,7 +280,7 @@ :status :untested :model "SCX-4623FW" -:interface "USB" +:interface "USB Ethernet" :usbid "0x04e8" "0x3440" :status :good @@ -382,6 +383,16 @@ :usbid "0x04e8" "0x3468" :status :untested +:model "M2070" +:interface "USB" +:usbid "0x04e8" "0x3469" +:status :good + +:model "C1860FW" +:interface "USB" +:usbid "0x04e8" "0x346b" +:status :untested + :model "M458x Series" :interface "USB" :usbid "0x04e8" "0x346f" @@ -402,6 +413,11 @@ :usbid "0x04e8" "0x3478" :status :untested +:model "C480W" +:interface "USB" +:usbid "0x04e8" "0x347e" +:status :untested + :model "K3250 Series" :interface "USB" :usbid "0x04e8" "0x3481" @@ -411,4 +427,3 @@ :interface "USB" :usbid "0x04e8" "0x3482" :status :untested - diff --git a/doc/doxygen-genesys.conf.in b/doc/doxygen-genesys.conf.in index af9309f..213d2bb 100644 --- a/doc/doxygen-genesys.conf.in +++ b/doc/doxygen-genesys.conf.in @@ -1,1793 +1,313 @@ -# Doxyfile 1.8.1.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" "). +# Doxyfile 1.8.8 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need -# to put quotes around the project name if it contains spaces. - PROJECT_NAME = GENESYS - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - PROJECT_NUMBER = @VERSION@ - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer -# a quick idea about the purpose of the project. Keep the description short. - PROJECT_BRIEF = GENESYS backend documentation - -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. -# Doxygen will copy the logo to the output directory. - PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - OUTPUT_DIRECTORY = ./ - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - +ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system -# doesn't support long names like on DOS, Mac, or CD-ROM. - SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding -# "class=itcl::class" will allow you to use the command class in the -# itcl::class meaning. - TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - EXTENSION_MAPPING = - -# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all -# comments according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you -# can mix doxygen, HTML, and XML commands with Markdown formatting. -# Disable only in case of backward compatibilities issues. - MARKDOWN_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - +AUTOLINK_SUPPORT = YES BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - DISTRIBUTE_GROUP_DOC = YES - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or -# section (for LaTeX and RTF). - INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). - INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - LOOKUP_CACHE_SIZE = 0 - #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. - EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespaces are hidden. - EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - HIDE_UNDOC_CLASSES = YES - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - SHOW_INCLUDE_FILES = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - +SHOW_GROUPED_MEMB_INC = NO FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - SORT_MEMBER_DOCS = NO - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen -# will still accept a match between prototype and implementation in such cases. - STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. - CITE_BIB_FILES = - #--------------------------------------------------------------------------- -# configuration options related to warning and progress messages +# Configuration options related to warning and progress messages #--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - WARN_IF_DOC_ERROR = YES - -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - WARN_LOGFILE = - #--------------------------------------------------------------------------- -# configuration options related to the input files +# Configuration options related to the input files #--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - INPUT = ../include/sane/ \ ../backend - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py -# *.f90 *.f *.for *.vhd *.vhdl - FILE_PATTERNS = genesys*.[ch] - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# Note that relative paths are relative to the directory from which doxygen is -# run. - EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. - EXCLUDE_SYMLINKS = YES - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - IMAGE_PATH = ./ - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if -# non of the patterns match the file name, INPUT_FILTER is applied. - FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when -# FILTER_SOURCE_FILES is enabled. - FILTER_SOURCE_PATTERNS = - +USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- -# configuration options related to source browsing +# Configuration options related to source browsing #--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C, C++ and Fortran comments will always remain visible. - STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - +SOURCE_TOOLTIPS = YES USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - VERBATIM_HEADERS = YES - +CLANG_ASSISTED_PARSING = NO +CLANG_OPTIONS = #--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index +# Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - IGNORE_PREFIX = - #--------------------------------------------------------------------------- -# configuration options related to the HTML output +# Configuration options related to the HTML output #--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - HTML_OUTPUT = ./genesys-html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when -# changing the value of configuration settings such as GENERATE_TREEVIEW! - HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! - HTML_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that -# the files will be copied as-is; there are no commands or markers available. - +HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the style sheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. - HTML_DYNAMIC_SECTIONS = NO - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of -# entries shown in the various tree structured indices initially; the user -# can expand and collapse entries dynamically later on. Doxygen will expand -# the tree to such a level that at most the specified number of entries are -# visible (unless a fully collapsed tree already exceeds this amount). -# So setting the number of entries 1 will produce a full collapsed tree by -# default. 0 is a special value representing an infinite number of entries -# and will result in a full expanded tree by default. - HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. - QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. - QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) -# at top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. Since the tabs have the same information as the -# navigation tree you can set this option to NO if you already set -# GENERATE_TREEVIEW to YES. - DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. -# Since the tree basically has the same information as the tab index you -# could consider to set DISABLE_INDEX to NO when enabling this option. - GENERATE_TREEVIEW = NO - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum -# values from appearing in the overview section. - ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you may also need to install MathJax separately and -# configure the path to it using the MATHJAX_RELPATH option. - USE_MATHJAX = NO - -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to -# the MathJax Content Delivery Network so you can quickly see the result without -# installing MathJax. -# However, it is strongly recommended to install a local -# copy of MathJax from http://www.mathjax.org before deployment. - +MATHJAX_FORMAT = HTML-CSS MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension -# names that should be enabled during MathJax rendering. - MATHJAX_EXTENSIONS = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - +MATHJAX_CODEFILE = SEARCHENGINE = NO - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. - SERVER_BASED_SEARCH = NO - +EXTERNAL_SEARCH = NO +SEARCHENGINE_URL = +SEARCHDATA_FILE = searchdata.xml +EXTERNAL_SEARCH_ID = +EXTRA_SEARCH_MAPPINGS = #--------------------------------------------------------------------------- -# configuration options related to the LaTeX output +# Configuration options related to the LaTeX output #--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - LATEX_OUTPUT = - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. - PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a -# standard footer. Notice: only use this tag if you know what you are doing! - LATEX_FOOTER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - +LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See -# http://en.wikipedia.org/wiki/BibTeX for more info. - LATEX_BIB_STYLE = plain - #--------------------------------------------------------------------------- -# configuration options related to the RTF output +# Configuration options related to the RTF output #--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - RTF_HYPERLINKS = NO - -# Load style sheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - RTF_EXTENSIONS_FILE = - #--------------------------------------------------------------------------- -# configuration options related to the man page output +# Configuration options related to the man page output #--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - +MAN_SUBDIR = MAN_LINKS = NO - #--------------------------------------------------------------------------- -# configuration options related to the XML output +# Configuration options related to the XML output #--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - XML_PROGRAMLISTING = YES - #--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- +GENERATE_DOCBOOK = NO +DOCBOOK_OUTPUT = docbook +DOCBOOK_PROGRAMLISTING = NO +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - GENERATE_AUTOGEN_DEF = NO - #--------------------------------------------------------------------------- -# configuration options related to the Perl module output +# Configuration options related to the Perl module output #--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - PERLMOD_MAKEVAR_PREFIX = - #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# pointed to by INCLUDE_PATH will be searched when a #include is found. - SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - INCLUDE_PATH = ../backend - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that -# overrules the definition found in the source code. - EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a -# semicolon, because these will confuse the parser if not removed. - SKIP_FUNCTION_MACROS = YES - #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration options related to external references #--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. For each -# tag file the location of the external documentation should be added. The -# format of a tag file without this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths -# or URLs. Note that each tag file must have a unique name (where the name does -# NOT include the path). If a tag file is not located in the directory in which -# doxygen is run, you must also specify the path to the tagfile here. - TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - +EXTERNAL_PAGES = YES PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to -# install and use dot, since it yields more powerful graphs. - CLASS_DIAGRAMS = NO - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - +DIA_PATH = HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - HAVE_DOT = NO - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - DOT_NUM_THREADS = 0 - -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the -# directory containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - +DOT_FONTNAME = DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to -# set the path where dot can find it. - DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# CLASS_DIAGRAMS tag to NO. - CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - UML_LOOK = NO - -# If the UML_LOOK tag is enabled, the fields and methods are shown inside -# the class node. If there are many fields or methods and many nodes the -# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS -# threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be -# exceeded by 50% before the limit is enforced. - UML_LIMIT_NUM_FIELDS = 10 - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - CALL_GRAPH = NO - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will generate a graphical hierarchy of all classes instead of a textual one. - GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible in IE 9+ (other browsers do not have this requirement). - DOT_IMAGE_FORMAT = png - -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible. Older versions of IE do not have SVG support. - INTERACTIVE_SVG = NO - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - DOTFILE_DIRS = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the -# \mscfile command). - MSCFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - +DIAFILE_DIRS = +PLANTUML_JAR_PATH = DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - DOT_CLEANUP = YES diff --git a/doc/doxygen-sanei.conf.in b/doc/doxygen-sanei.conf.in index 0b28011..68e0a85 100644 --- a/doc/doxygen-sanei.conf.in +++ b/doc/doxygen-sanei.conf.in @@ -1,1473 +1,312 @@ -# Doxyfile 1.5.7.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") +# Doxyfile 1.8.8 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - PROJECT_NAME = SANEI - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - PROJECT_NUMBER = @VERSION@ - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - +PROJECT_BRIEF = +PROJECT_LOGO = OUTPUT_DIRECTORY = ./ - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, -# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, -# Spanish, Swedish, and Ukrainian. - +ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - +ABBREVIATE_BRIEF = ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - +STRIP_FROM_PATH = +STRIP_FROM_INC_PATH = SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - +ALIASES = +TCL_SUBST = OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - OPTIMIZE_OUTPUT_VHDL = NO - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - +EXTENSION_MAPPING = +MARKDOWN_SUPPORT = YES +AUTOLINK_SUPPORT = YES BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - DISTRIBUTE_GROUP_DOC = YES - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - +INLINE_GROUPED_CLASSES = NO +INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - +LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - +EXTRACT_PACKAGE = NO EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - HIDE_UNDOC_CLASSES = YES - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - SHOW_INCLUDE_FILES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - +SHOW_GROUPED_MEMB_INC = NO +FORCE_LOCAL_INCLUDES = NO INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - SORT_MEMBER_DOCS = NO - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - SORT_BRIEF_DOCS = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - +SORT_MEMBERS_CTORS_1ST = NO SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - +STRICT_PROTO_MATCHING = NO GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - +ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by -# doxygen. The layout file controls the global structure of the generated output files -# in an output format independent way. The create the layout file that represents -# doxygen's defaults, run doxygen with the -l option. You can optionally specify a -# file name after the option, if omitted DoxygenLayout.xml will be used as the name -# of the layout file. - -LAYOUT_FILE = - +FILE_VERSION_FILTER = +LAYOUT_FILE = +CITE_BIB_FILES = #--------------------------------------------------------------------------- -# configuration options related to warning and progress messages +# Configuration options related to warning and progress messages #--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - +WARN_LOGFILE = #--------------------------------------------------------------------------- -# configuration options related to the input files +# Configuration options related to the input files #--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - INPUT = ../include/sane/ - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - FILE_PATTERNS = sanei*.h - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - +EXCLUDE = EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - +EXCLUDE_PATTERNS = +EXCLUDE_SYMBOLS = +EXAMPLE_PATH = +EXAMPLE_PATTERNS = EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - IMAGE_PATH = ./ - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - +INPUT_FILTER = +FILTER_PATTERNS = FILTER_SOURCE_FILES = NO - +FILTER_SOURCE_PATTERNS = +USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- -# configuration options related to source browsing +# Configuration options related to source browsing #--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. Otherwise they will link to the documentstion. - REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - +SOURCE_TOOLTIPS = YES USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - VERBATIM_HEADERS = YES - +CLANG_ASSISTED_PARSING = NO +CLANG_OPTIONS = #--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index +# Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - +IGNORE_PREFIX = #--------------------------------------------------------------------------- -# configuration options related to the HTML output +# Configuration options related to the HTML output #--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - HTML_OUTPUT = ./sanei-html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - +HTML_HEADER = +HTML_FOOTER = +HTML_STYLESHEET = +HTML_EXTRA_STYLESHEET = +HTML_EXTRA_FILES = +HTML_COLORSTYLE_HUE = 220 +HTML_COLORSTYLE_SAT = 100 +HTML_COLORSTYLE_GAMMA = 80 +HTML_TIMESTAMP = YES HTML_DYNAMIC_SECTIONS = NO - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. - +HTML_INDEX_NUM_ENTRIES = 100 GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - DOCSET_BUNDLE_ID = org.doxygen.Project - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - +DOCSET_PUBLISHER_ID = org.doxygen.Publisher +DOCSET_PUBLISHER_NAME = Publisher GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - +CHM_FILE = +HHC_LOCATION = GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - +CHM_INDEX_ENCODING = BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER -# are set, an additional index file will be generated that can be used as input for -# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated -# HTML documentation. - GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>. - +QCH_FILE = QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>. - QHP_VIRTUAL_FOLDER = doc - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file . - -QHG_LOCATION = - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - +QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = +QHG_LOCATION = +GENERATE_ECLIPSEHELP = NO +ECLIPSE_DOC_ID = org.doxygen.Project DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to FRAME, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. Other possible values -# for this tag are: HIERARCHIES, which will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list; -# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which -# disables this behavior completely. For backwards compatibility with previous -# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE -# respectively. - GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - +ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - +EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 - +FORMULA_TRANSPARENT = YES +USE_MATHJAX = NO +MATHJAX_FORMAT = HTML-CSS +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest +MATHJAX_EXTENSIONS = +MATHJAX_CODEFILE = +SEARCHENGINE = NO +SERVER_BASED_SEARCH = NO +EXTERNAL_SEARCH = NO +SEARCHENGINE_URL = +SEARCHDATA_FILE = searchdata.xml +EXTERNAL_SEARCH_ID = +EXTRA_SEARCH_MAPPINGS = #--------------------------------------------------------------------------- -# configuration options related to the LaTeX output +# Configuration options related to the LaTeX output #--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - +LATEX_OUTPUT = LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - +EXTRA_PACKAGES = +LATEX_HEADER = +LATEX_FOOTER = +LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - LATEX_HIDE_INDICES = NO - +LATEX_SOURCE_CODE = NO +LATEX_BIB_STYLE = plain #--------------------------------------------------------------------------- -# configuration options related to the RTF output +# Configuration options related to the RTF output #--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - +RTF_STYLESHEET_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- -# configuration options related to the man page output +# Configuration options related to the man page output #--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - +MAN_SUBDIR = MAN_LINKS = NO - #--------------------------------------------------------------------------- -# configuration options related to the XML output +# Configuration options related to the XML output #--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - XML_PROGRAMLISTING = YES - #--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- +GENERATE_DOCBOOK = NO +DOCBOOK_OUTPUT = docbook +DOCBOOK_PROGRAMLISTING = NO +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - GENERATE_AUTOGEN_DEF = NO - #--------------------------------------------------------------------------- -# configuration options related to the Perl module output +# Configuration options related to the Perl module output #--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- -# Configuration options related to the preprocessor +# Configuration options related to the preprocessor #--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - +INCLUDE_PATH = +INCLUDE_FILE_PATTERNS = +PREDEFINED = +EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES - #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration options related to external references #--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - +TAGFILES = +GENERATE_TAGFILE = ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - +EXTERNAL_PAGES = YES PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to the dot tool #--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - CLASS_DIAGRAMS = NO - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - +MSCGEN_PATH = +DIA_PATH = HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - HAVE_DOT = NO - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - +DOT_NUM_THREADS = 0 +DOT_FONTNAME = DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - +DOT_FONTPATH = CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - +UML_LIMIT_NUM_FIELDS = 10 TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - CALL_GRAPH = NO - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - +INTERACTIVE_SVG = NO +DOT_PATH = +DOTFILE_DIRS = +MSCFILE_DIRS = +DIAFILE_DIRS = +PLANTUML_JAR_PATH = DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO diff --git a/doc/gamma4scanimage.man b/doc/gamma4scanimage.man index fe81b15..576d148 100644 --- a/doc/gamma4scanimage.man +++ b/doc/gamma4scanimage.man @@ -3,9 +3,9 @@ .SH NAME gamma4scanimage \- create a gamma table for scanimage .SH SYNOPSIS -.B gamma4scanimage +.B gamma4scanimage .I gamma -.RI [ shadow +.RI [ shadow .RI [ highlight .RI [ maxin .RI [ maxout ]]]] @@ -52,7 +52,7 @@ defines the maximum output value. Take a look at the output of scanimage \-h to find out what maxout has to be. The default value is 255. .PP .SH EXAMPLE -.B scanimage \-\-custom\-gamma=yes \-\-gamma\-table +.B scanimage \-\-custom\-gamma=yes \-\-gamma\-table .I `gamma4scanimage 1.8 0 11500 16383 255` >image.pnm diff --git a/doc/gt68xx/gt68xx.CHANGES b/doc/gt68xx/gt68xx.CHANGES index 43f2e85..aa87504 100644 --- a/doc/gt68xx/gt68xx.CHANGES +++ b/doc/gt68xx/gt68xx.CHANGES @@ -17,7 +17,7 @@ V 1.0.82 (2006-10-03) V 1.0.81 (2006-05-21) * Added support for Plustek OpticPro S24 (some models). Added .conf entry for - Plustek OpticPro S12. + Plustek OpticPro S12. V 1.0.80 (2006-01-02) @@ -34,7 +34,7 @@ V 1.0.79 (2005-12-09) sane-backends 1.0.17 scanners are not detected anymore after closing the device. * Fixed wait_lamp_stable. Wait for a maximum time of 60 seconds. Print warming up message after 5 seconds. Print how long warming up took. -* For Mustek ScanExpress A3 USB, use more intelligent warm-up mechanism. The +* For Mustek ScanExpress A3 USB, use more intelligent warm-up mechanism. The brightness for this scanner first decreases and then increases again. With the previous logic the scanner always warmed up for at least 10 seconds even if it wasn't necessary. @@ -50,7 +50,7 @@ V 1.0.78 (2005-10-16) V 1.0.77 (2005-09-29) * Added support for Plustek OpticSlim M12 (untested). Based on patch from - Gerhard Jaeger <gerhard@gjaeger.de>. + Gerhard Jaeger <gerhard@gjaeger.de>. * Fixed gt68xx homepage links in man page. Changed minimum version of libusb to 0.1.8. @@ -290,7 +290,7 @@ V 1.0-55 (2004-03-06) * Added detection for Genius Vivid 1200 EX. * Fixed product id of Mustek BearPaw 2448 TA Plus. * Other minor updates. - + V 1.0-54 (2004-02-10) * Added basic support for Plustek OpticSlim 2400. Thanks to Radoslaw Grzanka and @@ -335,7 +335,7 @@ V 1.0-49 (2003-09-30) * Added ScanMagic 1200 UB Plus to man page and .desc. * Added Settings for Plustek OpticSlim 1200 * Added detection of Genius Vivid 4x. It won't work out-of-the-box, however. -* CCD coarse calib shouldn't run into an endless loop anymore. Plustek 1248U +* CCD coarse calib shouldn't run into an endless loop anymore. Plustek 1248U is much faster now. V 1.0-48 (2003-07-25) @@ -376,7 +376,7 @@ V 1.0-43 (2003-03-06) - Small requests are done with a response buffer of 8 bytes (instead of 64) now. Looks like GT-6816 based scanners return 8 bytes if the firmware is loaded and 64 bytes if it's not loaded. -- Changed GT-6816 firmware check to ignore errors from above change. +- Changed GT-6816 firmware check to ignore errors from above change. GT-6816 scanners work with the BSDs now (at least once). - Updated manpage concerning the BSDs. @@ -527,8 +527,8 @@ V 1.0-27 (2002-10-25) - Removed override for Trust Copmact Scan and Medion/Tevion/Lifetec LT 9452 (Mustek ScanExpress 1200 UB Plus clones). - Removed override for Tevion MD 9458 (seems to be an Artec Ultima 2000 (e +?) - clone). - + clone). + V 1.0-26 (2002-10-22) - Several fixes for Medion MD-9385 and Artec Ultima 2000 based scanners. The diff --git a/doc/leo/leo.txt b/doc/leo/leo.txt index 4f4eb61..26dbe21 100644 --- a/doc/leo/leo.txt +++ b/doc/leo/leo.txt @@ -3,8 +3,8 @@ Across Technologies FS-1130 (A rebadged LEO Technologies) - 000: 06 31 14 01 1f 00 00 00 41 43 52 4f 53 53 20 20 .1......ACROSS - 016: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 + 000: 06 31 14 01 1f 00 00 00 41 43 52 4f 53 53 20 20 .1......ACROSS + 016: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 032: 31 2e 31 36 09 f6 0d b6 01 2c 01 2c 39 36 30 30 1.16.....,.,9600 @@ -16,12 +16,12 @@ LEO LEOScan S3: or 000: 06 00 02 02 1f 00 00 00 4c 45 4f 00 00 00 00 00 ........LEO..... 016: 4c 45 4f 53 63 61 6e 2d 53 33 00 00 00 00 00 00 LEOScan-S3...... - 032: 31 2e 31 30 1.10 + 032: 31 2e 31 30 1.10 Genius FS1130 000: 06 31 14 01 1f 00 00 00 4b 59 45 20 43 4f 52 50 .1......KYE CORP 016: 43 6f 6c 6f 72 50 61 67 65 2d 43 53 20 20 20 20 ColorPage-CS - 032: 31 2e 31 34 1.14 + 032: 31 2e 31 34 1.14 /*--------------------------------------------------------------------------*/ @@ -52,7 +52,7 @@ Start a scan SET WINDOW 24 00 00 00 00 00 30 00 00 00 Total length is 48 bytes - 01 = 0x2E (may be 0x30 - 2, ie total length -2) + 01 = 0x2E (may be 0x30 - 2, ie total length -2) 07 = length (48-8 = 40 = 0x28) 10-11 = X Resolution 12-13 = Y resolution @@ -66,7 +66,7 @@ Total length is 48 bytes 0x01 = halftone 0x02 = grayscale 0x05 = color - 34 = bit depth + 34 = bit depth 1 or 8 37 = ? RIF + other 43 = ? 0x01 @@ -77,7 +77,7 @@ READ SEND -2A 00 03 00 00 01 00 03 00 00 +2A 00 03 00 00 01 00 03 00 00 2A 00 02 00 00 0F 00 01 00 00 2 = data type code 0x02 = halftone pattern @@ -89,13 +89,13 @@ GET DATA BUFFER STATUS 7-8 allocation length returned buffer is 0x10 bytes long. - 00 00 0D 00 00 00 03 D3 60 00 00 00 01 48 00 EE - + 00 00 0D 00 00 00 03 D3 60 00 00 00 01 48 00 EE + 0-2 = additional length (0x10-3 = 0x0D) 6-8 = (?) total scan length 9-11 = filled data buffer 12-13 = number of lines left (decrease during a scan) - 14-15 = bytes per line (constant during a scan) + 14-15 = bytes per line (constant during a scan) /*--------------------------------------------------------------------------*/ @@ -119,7 +119,7 @@ park the CCD: SET WINDOWS TUR SCAN - + /*--------------------------------------------------------------------------*/ Command sequence for the S3 diff --git a/doc/matsushita/matsushita.txt b/doc/matsushita/matsushita.txt index 72b8fcd..0de6d94 100644 --- a/doc/matsushita/matsushita.txt +++ b/doc/matsushita/matsushita.txt @@ -38,12 +38,12 @@ REQUEST SENSE: INQUIRY: 12 00 00 00 60 00 result: - 06 00 02 02 5B 00 00 10 4B 2E 4D 2E 45 2E 20 20 - 4B 56 2D 53 53 32 35 41 20 20 20 20 20 20 20 20 - 31 2E 30 35 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 06 00 02 02 5B 00 00 10 4B 2E 4D 2E 45 2E 20 20 + 4B 56 2D 53 53 32 35 41 20 20 20 20 20 20 20 20 + 31 2E 30 35 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SET WINDOWS: 24 00 00 00 00 00 00 00 00 00 @@ -51,9 +51,9 @@ SET WINDOWS: 24 00 00 00 00 00 00 00 48 00 72 bytes. 6-7 = 0x40 = window descriptor length - + Window Descriptor Block: - 0 = page side + 0 = page side 0x00 = front 0x80 = back 2-3 = X resolution @@ -80,7 +80,7 @@ SET WINDOWS: 0x80 = User downloaded pattern 29 = reverse image 0x00 = no reverse - 0x80 = reverse + 0x80 = reverse 43 = image emphasis 0x80 smooth 0x00 none @@ -111,7 +111,7 @@ SET WINDOWS: 0x82 = mode 3 59 = automatic separation 0x00 = no (twain default) - 0x80 = yes + 0x80 = yes 60 = white level 0x00 = from white stick (twain default) 0x80 = from paper @@ -136,7 +136,7 @@ READ: 5: page side 0x00 = front 0x80 = back - + 0x80 image size in dots 3(?)-4: number of the page to read. Multipage mode. @@ -147,7 +147,7 @@ READ: SEND(10): 2A 00 03 00 00 01 00 01 0A 00 2 = data type code - 0x02 = halftone pattern + 0x02 = halftone pattern data is 10 bytes of header + 64 bytes for the matrix 0x03 = gamma table data is 10 bytes of header + 256 bytes for the table diff --git a/doc/mustek/mustek.CHANGES b/doc/mustek/mustek.CHANGES index b7c7e2b..c5de63c 100644 --- a/doc/mustek/mustek.CHANGES +++ b/doc/mustek/mustek.CHANGES @@ -212,7 +212,7 @@ CHANGES for the SANE Mustek backend * Added OS/2 compatibility fixes from "Franz Bakan" <fbakan@gmx.net>. 2001-11-18 - * The Primax Compact 4800 seems to bes also supported. Added .desc and + * The Primax Compact 4800 seems to bes also supported. Added .desc and manpage entries. 2001-09-10 @@ -290,7 +290,7 @@ CHANGES for the SANE Mustek backend 2001-04-19 * Don't check for macro VERSION any longer in sane_init. Print out - PACKAGE_VERSION instead. + PACKAGE_VERSION instead. * Update email address and homepage. 2001-08-08 @@ -348,7 +348,7 @@ CHANGES for the SANE Mustek backend 2000-12-31 * Released Mustek backend 1.0-103 - + 2000-12-30 * Implemented calibration (color and gray mode) for the Paragon 1200 Pro. It's not perfect and needs lots of tests. It may work for the Paragon @@ -360,14 +360,14 @@ CHANGES for the SANE Mustek backend * Increased scan width to 8.6" for 1200 Pro. 2000-12-26 - * Added calibration for the SE 12000 SP Plus. Doesn't fully work until now + * Added calibration for the SE 12000 SP Plus. Doesn't fully work until now (images are too dark and colored). 2000-12-23 * Added option for Legal format (because the ScanExpress 12000 SP A4 size scanner can't be distinguished from the Paragon 1200 LS Legal size scanner by software). - + 2000-12-21 * Added a few checks for Null-Pointers. * Removed old code for SE calibration. @@ -378,7 +378,7 @@ CHANGES for the SANE Mustek backend 2000-12-10 * Released Mustek backend 1.0-102 - + 2000-12-09 * Fixed wrong comment in encode_resolution * Added missing test for return status in sane_start @@ -386,7 +386,7 @@ CHANGES for the SANE Mustek backend 2000-12-05 * Released Mustek backend 1.0-101 - + 2000-12-05 * Fixed lamp setting (avoid problems with some SE scanners). @@ -443,18 +443,18 @@ CHANGES for the SANE Mustek backend scanning (seems to work for firmware >= 2.00) * Adjusted transparency adapter support for all ScanExpress scanners. The 12000 A3 SP can only do A4 beacuse I don't have the right TA. - * don't use u_int* types in mustek.h because the definitions for these + * don't use u_int* types in mustek.h because the definitions for these types are not included 2000-11-04 * SE scanners can now scan 75, 100, 150, 200, 250, 300, 400, 500, 600, - 900 and 1200 dpi in color mode (the 1200 dpi models). These are fixed + 900 and 1200 dpi in color mode (the 1200 dpi models). These are fixed resolutions, a resolution >= the wanted resolution is selected. This makes preview and some resolutions faster than before (at least for some scanners), because lower resolutions can be used. - * Minimum scan resolution is 60 dpi in gray and lineart and 75 dpi in + * Minimum scan resolution is 60 dpi in gray and lineart and 75 dpi in color mode for the SE scanners now. - + 2000-10-29 * Fixed a bug concerning block LD. Paragon 1 and 2 were exchanged. * Paragon 12000SP color mode works now without garbage at the end @@ -479,9 +479,9 @@ CHANGES for the SANE Mustek backend 2000-10-03 * Released backend version 1.0-98. - + 2000-10-03 - * Fixed segmentation fault in sane_init (else statement was missing). + * Fixed segmentation fault in sane_init (else statement was missing). Thanks to Oliver Rauch who spotted this problem. * Re-enabled double buffering. @@ -518,7 +518,7 @@ CHANGES for the SANE Mustek backend 2000-09-24 * Released backend version 1.0-97. - + 2000-09-24 * Added RGB brightness and contrast for 3pass scanners * Brightness and contrast is +-100% for 3pass scanners now @@ -635,7 +635,7 @@ CHANGES for the SANE Mustek backend 2000-07-26 * fixed possible segfault pointer info was not checked for 0 (found by Petter Reinholdtsen) - * Updated comment about Paragon 600 II N linedistance correction in man + * Updated comment about Paragon 600 II N linedistance correction in man page 2000-07-25 @@ -643,7 +643,7 @@ CHANGES for the SANE Mustek backend 2000-07-25 * Released backend version 1.0-92 - + 2000-07-24 * Fixed ADF handling (output was mirrored in x direction). Gray and lineart seems to work now. Color and halftone modes look somewhat crazy. @@ -682,7 +682,7 @@ CHANGES for the SANE Mustek backend * Released backend version 1.0-89 2000-06-30 - * Fixed bug in do_stop. The scan slider didn't return after the scan + * Fixed bug in do_stop. The scan slider didn't return after the scan in some situations. 2000-06-28 @@ -703,7 +703,7 @@ CHANGES for the SANE Mustek backend 2000-06-25 * updated manpage concerning parport and USB scanners - * added example for 600 II N to mustek.conf + * added example for 600 II N to mustek.conf 2000-06-22 * fixed debug output bug in fix_linedistance_se (found by Jan-Erik Karlsson) @@ -750,7 +750,7 @@ CHANGES for the SANE Mustek backend * Code cleanup and reorganization for inclusion of the Paragon 1200 A3 Pro. 2000-06-07 - * Fixed bug in sane_close where the chain of handles got destroyed by + * Fixed bug in sane_close where the chain of handles got destroyed by closing the first device. This bug is in the backend since 3 1/2 years. Thanks to Jochen Eisinger for spotting this. @@ -762,7 +762,7 @@ CHANGES for the SANE Mustek backend 2000-06-04 * changed (again) Paragon 12000 SP linedistance handling, now 1.02 uses - normal LD corrections, all other use none. We'll see, if this works. + normal LD corrections, all other use none. We'll see, if this works. Thanks to Reinhard Günzel who helped to debug this. * fixed some long lines (>80 chars) @@ -805,7 +805,7 @@ CHANGES for the SANE Mustek backend 2000-05-08 * fixed remaining sane_cancel problems (in non_blocking mode) - * fixed color stripes and segmentation fault for Paragon MFS-12000SP + * fixed color stripes and segmentation fault for Paragon MFS-12000SP 1.00 (at least for me) * added more debug output to inquiry * added possibility to distinguish old and new firmware formats @@ -816,14 +816,14 @@ CHANGES for the SANE Mustek backend * released backend version 1.0-81 2000-05-06 - * added transparency adapter support for the Paragon 600 II CD, 600S, + * added transparency adapter support for the Paragon 600 II CD, 600S, 800 II SP, 600 II N, ScannExpress 6000SP and 12000SP * removed "color lineart" and "color halftone" for all scanners. These modes didn't work for any of my scanners. * added more debug output for ADF and TA * fixed bug when ADF is out of documents * Scan source option is only available if TA or ADF is present. For - SE and N models TA is always available because it can't be detected + SE and N models TA is always available because it can't be detected by hardware * removed "backtrack", "speed" and "grain" from 600 II N options, the scanner doesn't support them @@ -839,12 +839,12 @@ CHANGES for the SANE Mustek backend * Added Warning for scanners that are not (fully) tested 2000-04-26 - * changed sane_init to use sanei_config_read () and + * changed sane_init to use sanei_config_read () and sanei_config_get_string () 2000-04-24 * released backend version 1.0-80 - + 2000-04-23 * fixed lineart and color scanning >600 dpi for the SE 12000SP * added variable debug_level to be faster without debugging in attach () @@ -863,13 +863,13 @@ CHANGES for the SANE Mustek backend 2000-04-20 * Output of scanning time now works with scanimage, too. - * Adjusted scan area to the Windows driver defaults for Paragon + * Adjusted scan area to the Windows driver defaults for Paragon MFS-6000CX * Added transparency adapter support for the Paragon MFS-6000CX and MFS-12000SP 2000-04-19 - * Adjusted scan area to the Windows driver defaults for Paragon + * Adjusted scan area to the Windows driver defaults for Paragon MFS-12000SP 2000-04-17 @@ -883,14 +883,14 @@ CHANGES for the SANE Mustek backend These modes didn't work for any of my scanners. * fixed problems in color mode for the MFS-8000SP (gamma table is now uploaded even if not selected) - * Output "cover open" only for ScanExpress scanners (Paragon scanners + * Output "cover open" only for ScanExpress scanners (Paragon scanners don't have a cover sensor) * Added transparency adapter support for the Paragon MFS-6000SP and MFS-12000CX * Added output of transfer speed (kb/s) * maximum allocated memory for read request can be set by a #define * buffer size can be set on a per scanner basis - * Adjusted scan area to the Windows driver defaults for Paragon + * Adjusted scan area to the Windows driver defaults for Paragon 800 II SP * Added quotation marks to inquiry output @@ -899,7 +899,7 @@ CHANGES for the SANE Mustek backend ScanExpress 12000SP * Fixed scan area settings (TL-X and TL-Y) for transparency adapter (TA) * Added TA support for Paragon 8000SP - + 2000-04-13 * Added more debug output in sane_read and some other functions * removed warnings @@ -913,7 +913,7 @@ CHANGES for the SANE Mustek backend 2000-04-09 * released backend version 1.0-79 - + 2000-04-08 * added output of scanning time (debuglevel 2 and higher) * removed old code from sane_cancel @@ -931,16 +931,16 @@ CHANGES for the SANE Mustek backend 2000-04-03 * output backend and version information * fixed resolution encoding for MFS12000cx - * Changed version system to be compatible to the SANE standard + * Changed version system to be compatible to the SANE standard (major, minor, build); 0.78 --> 1.0-78 - + 2000-04-02 * released backend version 0.78 * added MUSTEK_FLAG_DOUBLE_RES for the MFS-12000CX 3-pass scanner, resolutions > 600 dpi should work now - + 2000-04-01 - * reduced scan area for Paragon 800 S / II SP + * reduced scan area for Paragon 800 S / II SP 2000-03-29 * released backend version 0.77 @@ -948,17 +948,17 @@ CHANGES for the SANE Mustek backend * more debug level tweaking * man page update * model name update - + 2000-03-25 * corrected some spelling errors - + 2000-03-24 * reduced scanarea for the MSF-6000SP * restructured scanner recognition 2000-03-18 * released backend version 0.76 - + 2000-03-17 * removed some compiler warnings * changed the sane.model names (e.g. ScanExpress 12000SP instead of @@ -978,12 +978,12 @@ CHANGES for the SANE Mustek backend possibly never happen) * fixed firmware version identification for newer ScanExpress models (patch from Marco G. Salvagno) - * probably fixed linedistance correction at high resolutions for + * probably fixed linedistance correction at high resolutions for MFS-1200SP firmware 1.00 and possibly others (patch from Andreas Beck) * added check for ADF ready in sane_start (patch from Joerg Anders) * Bug fix in the STORE makros (patch from Norbert Mueller) - - + + 2000-03-06 * created mustek.CHANGES file * released backend version 0.74 diff --git a/doc/mustek_usb/mustek_usb.CHANGES b/doc/mustek_usb/mustek_usb.CHANGES index 7b01c4a..b31f248 100644 --- a/doc/mustek_usb/mustek_usb.CHANGES +++ b/doc/mustek_usb/mustek_usb.CHANGES @@ -17,7 +17,7 @@ CHANGES for the SANE Mustek USB backend * Fixed check for single quotation marks. 2003-02-22: - * Release of version 1.0-16. + * Release of version 1.0-16. 2003-02-22: * Iniatialize global variables explicitely. @@ -34,7 +34,7 @@ CHANGES for the SANE Mustek USB backend to other backends for Mustek scanners. 2002-07-17: - * Release of version 1.0-15. + * Release of version 1.0-15. 2002-07-17: * Added manufacturer comment in mustek_usb.desc. @@ -43,7 +43,7 @@ CHANGES for the SANE Mustek USB backend * Really check the status in usb_low_open. 2002-04-24: - * Release of version 1.0-14. + * Release of version 1.0-14. 2002-04-24: * Undef MIN and MAX if they are defined in mustek_usb_low.h to avoid @@ -53,7 +53,7 @@ CHANGES for the SANE Mustek USB backend * Free devlist in sane_exit. 2002-04-10: - * Release of version 1.0-13. + * Release of version 1.0-13. 2002-04-10: * sane_set_io_mode must return SANE_STAUS_GOOD if non_blocking is false. @@ -63,7 +63,7 @@ CHANGES for the SANE Mustek USB backend * sane_exit: set freed variable to 0. 2002-03-20: - * Release of version 1.0-12. + * Release of version 1.0-12. 2002-03-19: * Option 0 has an empty name now. @@ -73,7 +73,7 @@ CHANGES for the SANE Mustek USB backend * Added more debug output in sane_control_option. 2002-03-17: - * Release of version 1.0-11. + * Release of version 1.0-11. 2002-03-16: * mustek_usb.c: Fixed segfault when opening device again after closing. @@ -90,7 +90,7 @@ CHANGES for the SANE Mustek USB backend * Fixed undefined operation warnings. 2002-01-11 - * Release of version 1.0-10. + * Release of version 1.0-10. 2002-01-11 * mustek_usb_high.(c|h), mustek_usb_mid.(c|h): commented out unused CCD code. @@ -106,7 +106,7 @@ CHANGES for the SANE Mustek USB backend * Added link to plustek to manual page. 2001-12-08 - * Release of version 1.0-9. + * Release of version 1.0-9. 2001-12-08 @@ -118,7 +118,7 @@ CHANGES for the SANE Mustek USB backend size of data acquired in one turn. 2001-11-15 - * Release of version 1.0-8. + * Release of version 1.0-8. 2001-11-15 * Updated manual page concerning FreeBSD and kernel configuration. @@ -140,7 +140,7 @@ CHANGES for the SANE Mustek USB backend * Removed load_private_profile (now in usb_high_scan_init). 2001-10-07 - * Release of version 1.0-7. + * Release of version 1.0-7. 2001-10-07 @@ -312,7 +312,7 @@ CHANGES for the SANE Mustek USB backend * mustek_usb_low: - fixed compilation warnings - fixed compilation problems - - fixed C++ to C transition issues (e.g. "initializer element is not + - fixed C++ to C transition issues (e.g. "initializer element is not computable at load time") - fixed debug output - adjusted some names @@ -355,7 +355,7 @@ CHANGES for the SANE Mustek USB backend 2001-07-22 * mustek_usb_low: Only one data structure: ma1017. - * mustek_usb_mid: + * mustek_usb_mid: - removed // - remove SANE disclaimers - use SANE types @@ -404,7 +404,7 @@ CHANGES for the SANE Mustek USB backend * Used "../include/sane" in #include statements * Used /dev/usbscanner in mustek_usb.conf * Fixed mustek_usb.desc - * Fixed mustek_usb.*: + * Fixed mustek_usb.*: - use correct names - no leading "_" - use only C-style comments @@ -418,4 +418,4 @@ CHANGES for the SANE Mustek USB backend - commented out all references to c_scanner - removed references to WORD and other non-standard types - moved read_rows from global to Mustek_Usb_Scanner - --> mustek_usb.* compiles
\ No newline at end of file + --> mustek_usb.* compiles diff --git a/doc/mustek_usb2/mustek_usb2.CHANGES b/doc/mustek_usb2/mustek_usb2.CHANGES index 38886e8..6e37236 100644 --- a/doc/mustek_usb2/mustek_usb2.CHANGES +++ b/doc/mustek_usb2/mustek_usb2.CHANGES @@ -7,7 +7,7 @@ V 1.0-10 (2005-10-16) V 1.0-9 (2005-10-02) -- Removed global variables in mustek_usb2.c: +- Removed global variables in mustek_usb2.c: Deleted the following variables (not necessary): m_bIsOpen Moved the following varaiables to Mustek_Scanner structure: @@ -81,7 +81,7 @@ V 1.0-4 (2005-09-27) a2nu2/spicall/spicall.c --> included in mustek_usb2.c a2nu2/spicall/spicall_ex.h a2nu2/spicall/spicall_g.h --> included in mustek_usb2_high.c - a2nu2/include/asic.h --> included in mustek_usb2_asic_low.h + a2nu2/include/asic.h --> included in mustek_usb2_asic_low.h a2nu2/include/debug.h --> removed a2nu2/include/ini.h a2nu2/include/msam.ini --> removed @@ -94,11 +94,11 @@ V 1.0-4 (2005-09-27) a2nu2/asic/asic_libusb.h --> removed a2nu2/asic/asic_mid.c --> mustek_usb2_asic_mid.c a2nu2/asic/asic_mid.h --> included in mustek_usb2_asic_mid.c - a2nu2/asic/asic_motor.c --> mustek_usb2_asic_motor.c + a2nu2/asic/asic_motor.c --> mustek_usb2_asic_motor.c a2nu2/asic/asic_motor.h --> mustek_usb2_asic_motor.h - a2nu2/asic/asic_usb.c --> mustek_usb2_asic_low.c + a2nu2/asic/asic_usb.c --> mustek_usb2_asic_low.c a2nu2/asic/asic_usb.h --> included in mustek_usb2_asic_low.h - a2nu2/asic/DefineScanner.h --> mustek_usb2_asic_low.h + a2nu2/asic/DefineScanner.h --> mustek_usb2_asic_low.h a2nu2/asic/ScanRegDef.h --> included in mustek_usb2_asic_low.h - Changed backend name to mustek_usb2. diff --git a/doc/net.tex b/doc/net.tex index a29fb75..d6bc110 100644 --- a/doc/net.tex +++ b/doc/net.tex @@ -86,7 +86,7 @@ The four primitive types of the SANE standard are encoded as follows: \code{SANE\_Char} array. The trailing NUL byte is considered part of the array and a \code{NULL} pointer is encoded as a zero-length array. - + \item[\code{\defn{SANE\_Handle}}:] A handle is encoded like a word. The network backend needs to take care of converting these integer values to the opaque pointer values that are presented to the user @@ -473,7 +473,7 @@ are no request or reply arguments in this call. As a result of this call, the connection between the client and the server that was established by the \code{SANE\_NET\_INIT} call will be closed. -% Local Variables: +% Local Variables: % mode: latex % TeX-master: "sane.tex" -% End: +% End: diff --git a/doc/plustek/FAQ b/doc/plustek/FAQ index 7d65f41..a3a224f 100644 --- a/doc/plustek/FAQ +++ b/doc/plustek/FAQ @@ -51,7 +51,7 @@ SOLUTION: --------- Set the link /usr/src/linux to your current kernel-source tree before recompiling -kernel-modules like pt_drv, then your version mismatch +kernel-modules like pt_drv, then your version mismatch problem should be solved. @@ -303,7 +303,7 @@ A: Normally, there is no need to do so, because once you have to worry about loading the driver. It happens automagically. ;-) The driver will be loaded when needed (and eventually removed after a specific time of not using it). - + Nevertheless, another possibility is to do a modprobe pt_drv in the /etc/rc.d/boot.local (using SuSE) or /etc/rc.d/rc.local (using RedHat or Mandrake) file @@ -382,4 +382,3 @@ A: In general you can install it over. BUT this has caused This should cover all the directories where maybe some sane files are installed... - diff --git a/doc/plustek/Makefile.kernel24 b/doc/plustek/Makefile.kernel24 index 207ef39..28677c1 100644 --- a/doc/plustek/Makefile.kernel24 +++ b/doc/plustek/Makefile.kernel24 @@ -43,7 +43,7 @@ REFOPT = -xref-all -index-all -html32 # # add the following to get assembly listing -# -Wa,-alh,-L -g +# -Wa,-alh,-L -g # # get some version numbers @@ -248,4 +248,3 @@ depend .depend dep: ifeq (.depend,$(wildcard .depend)) #include .depend endif - diff --git a/doc/plustek/Plustek-PARPORT-TODO.txt b/doc/plustek/Plustek-PARPORT-TODO.txt index 94ef5f7..6eb8667 100644 --- a/doc/plustek/Plustek-PARPORT-TODO.txt +++ b/doc/plustek/Plustek-PARPORT-TODO.txt @@ -28,7 +28,7 @@ Genius HR6 negative scanning not okay none ********************************* DONE *************************************** -- PS/2 bidi does not work (libieee1284) +- PS/2 bidi does not work (libieee1284) - Update the IOCTL interface and remove some old structs (CmdBlk) ******************************** SKIPPED ************************************* diff --git a/doc/plustek/Plustek-PARPORT.changes b/doc/plustek/Plustek-PARPORT.changes index 0e7d73b..6aa878b 100644 --- a/doc/plustek/Plustek-PARPORT.changes +++ b/doc/plustek/Plustek-PARPORT.changes @@ -149,11 +149,11 @@ Version 0.43-7 05/11/2005 1.0 Fixed timer issues in user-space (Thanx to Rod Roark) Version 0.43-8 08/10/2005 - 1.0 Fixed problem on ASIC96003/1 based devices, when scanning + 1.0 Fixed problem on ASIC96003/1 based devices, when scanning lineart at 200 and 300 dpi Version 0.43-9 11/14/2005 - 1.0 Fixed sizeof(long) issue for 64bit platforms, see + 1.0 Fixed sizeof(long) issue for 64bit platforms, see bug #302195 Version 0.43-10 02/16/2006 @@ -177,4 +177,4 @@ Version 0.43-13 06/18/2007 Version 0.44-1 02/13/2013 1.0 Fixed issues for Kernels > 2.6.35 2.0 Define ULong and friends to uint32_t to make the driver - work in a 64 bit environment
\ No newline at end of file + work in a 64 bit environment diff --git a/doc/plustek/Plustek-PARPORT.txt b/doc/plustek/Plustek-PARPORT.txt index e5b6097..a181b9c 100644 --- a/doc/plustek/Plustek-PARPORT.txt +++ b/doc/plustek/Plustek-PARPORT.txt @@ -22,7 +22,7 @@ in sane-backends/backend. Simply do (as root user) Then the module should be compiled, installed and loaded. -Add the following three lines to file /etc/modules.conf +Add the following three lines to file /etc/modules.conf alias char-major-40 pt_drv pre-install pt_drv modprobe -k parport @@ -44,6 +44,3 @@ protocol will be changed and newer drivers won't work with older backends and vice versa. In this case (error -9019 in the SANE debug output!!) you have to recompile SANE AND the driver (have a look at the installation procedure above). - - - diff --git a/doc/plustek/Plustek-USB-TODO.txt b/doc/plustek/Plustek-USB-TODO.txt index 0ea7e8b..7d03e9b 100644 --- a/doc/plustek/Plustek-USB-TODO.txt +++ b/doc/plustek/Plustek-USB-TODO.txt @@ -50,4 +50,3 @@ make mono/gray modes work on Canon scanners done copy picture line by line to backend done cancel function does not work correctly in large resolutions fixed Move documents to its correct SANE place done - diff --git a/doc/plustek/Plustek-USB.changes b/doc/plustek/Plustek-USB.changes index 8ed5cc8..ae6e69e 100644 --- a/doc/plustek/Plustek-USB.changes +++ b/doc/plustek/Plustek-USB.changes @@ -148,7 +148,7 @@ optical one (sensor stops too early) V 0.50-2 (2005-08-19) --------------------- More cleanup. -Removed obsolete _WAF_BLACKFINE. +Removed obsolete _WAF_BLACKFINE. LiDE20 does not seem to have a reliable black calibration area, so the devices now will switch off the lamp for dark calibration. Fixed line statistics and added calibration data output. @@ -283,7 +283,7 @@ V 0.47-1 - 0.47-4 V 0.46-9 (2003-11-03) --------------------- -- Added alternate calibration for CIS devices +- Added alternate calibration for CIS devices - Added coarse calibration data-cache - Moved parallelport code to extra backend file plustek_pp - Fixed some minor bugs diff --git a/doc/plustek/Plustek-USB.txt b/doc/plustek/Plustek-USB.txt index e1ee793..939d4d7 100644 --- a/doc/plustek/Plustek-USB.txt +++ b/doc/plustek/Plustek-USB.txt @@ -20,7 +20,7 @@ PLUSTEK ======= Vendor ID: 0x07B3 -Product ID Device-description and status +Product ID Device-description and status 0x0005 not identified yet 0x0007 not identified yet 0x000F not identified yet @@ -32,21 +32,21 @@ Product ID Device-description and status 0x0015 U24 (LM9832) - working 0x0016 not identified yet 0x0017 UT12 - working, UT16 - working, UT24 - working - + MUSTEK ====== BearPaw vendor ID: 0x0400 (They use the NationalSemiconductors ID!!!) -Product ID Device-description and status +Product ID Device-description and status 0x1000 BearPaw 1200 (LM9831) - working 0x1001 BearPaw 1200 (LM9832) - not tested 0x1001 BearPaw 2400 (LM9832) - mostly working - + KYE (Genius) ============ Vendor ID: 0x0458 - -Product ID Device-description and status + +Product ID Device-description and status 0x2007 ColorPage-HR6 V2 - working 0x2008 ColorPage-HR6 V2 - not tested 0x2009 ColorPage-HR6A - not tested @@ -58,7 +58,7 @@ Hewlett Packard =============== Vendor ID: 0x03F0 -Product ID Device-description and status +Product ID Device-description and status 0x0505 HP Scanjet 2100c - working 0x0605 HP Scanjet 2200c - working @@ -66,7 +66,7 @@ EPSON ===== Vendor ID: 0x04b8 -Product ID Device-description and status +Product ID Device-description and status 0x010F EPSON Perfection 1250/Photo - working 0x011D EPSON Perfection 1260/Photo - working @@ -74,9 +74,9 @@ UMAX ==== Vendor ID: 0x1606 -Product ID Device-description and status -0x0050 UMAX 3400 - working -0x0060 UMAX 3400/3450 - working +Product ID Device-description and status +0x0050 UMAX 3400 - working +0x0060 UMAX 3400/3450 - working 0x0160 UMAX 5400 - working COMPAQ @@ -90,7 +90,7 @@ CANON ===== Vendor ID: 0x04A9 -Product ID Device-description and status +Product ID Device-description and status 0x???? FB620U - not integrated 0x2206 N650U - working 0x2207 N1220U - working @@ -216,7 +216,7 @@ usbscanner 0x0003 0x1606 0x0160 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00 The example line shows the vendor ID of UMAX 0x1606 and the product ID of the 5400 0x0160 - these values must match the ones of your scanner. -Last step is adding a script in +Last step is adding a script in /etc/hotplug/usb/ It is called "usbscanner" (don't forget the executable rights) @@ -232,7 +232,7 @@ fi This script will correct the access right to your scanner device when the device is plugged in. - + Debugging your USB scanner (written by Kev Green) ------------------------------------------------- @@ -454,4 +454,3 @@ CM - Color Mode (unitless), 3 for channel pixel rate color, else 1 ------------------------- - diff --git a/doc/releases.txt b/doc/releases.txt index 1579b15..0cb7518 100644 --- a/doc/releases.txt +++ b/doc/releases.txt @@ -1,4 +1,4 @@ -2009-05-05 +2019-08-24 This text summarizes some points to pay attention to when a new release of sane-backends is planned. @@ -6,8 +6,9 @@ of sane-backends is planned. Timetable (approximate periods): Day 0: Announcement of upcoming release on sane-devel including timetable + and pointer to the GitLab milestone Day 14: Feature freeze (only bugfixes + documentation updates) -Day 28: Code freeze (only fixes for bugs that can destroy hardware, can cause +Day 28: Code freeze (only fixes for bugs that can destroy hardware, can cause compilation problems or render a backend completely unusable, and documentation updates are allowed) Day 35: Release @@ -16,79 +17,46 @@ Before the release: * set :new :yes on any new backend .desc files, by looking for added files: - cd backend - ls | while read aa; do git log --follow --diff-filter=A --find-renames=40% --format="%ai $aa" "$aa"; done > foo.log + version=1.0.27 + git ls-files -- backend | while read f; do + git log --follow --diff-filter=A --find-renames=40% \ + --format="%ai $f" $version..HEAD -- "$f" + done | cat - Then inspect foo.log for any files added since the last release. -* Make sure that config.guess and config.sub are up-to-date (get them from - savannah.gnu.org/projects/config) (git clone is easiest) -* configure.ac: remove 'git' from textual version number, and increment it -* run autoreconf --force but do *NOT* use the --install option as it will - overwrite our custom ltmain.sh -* ChangeLog: generate from git log, something like: - git log RELEASE_1_0_25..HEAD > ChangeLog * NEWS: update and enter date of release, etc - Get list of heavily change backends via: git diff --stat RELEASE_1_0_25 - Get other things by reading ChangeLog -* sane-backends.lsm: update + Get list of heavily change backends via: git diff --stat $version..HEAD + Get list of details from: git log $version..HEAD * git commit -a -* tag git with release tag; e.g.: 'git tag -a RELEASE_1_0_15' -* probably DONT want to git push here, because alioth will rebuild it's local - checkout needlessly +* git push origin master Making the release: -* make tar.gz, sane-backends-x.y.z.lsm, and .md5sum with "make sane-backends" -* unpack tar.gz in temporary directory -* make diff from last release by unpacking it also in temporary directory - and running e.g. - diff -uNr sane-backends-1.0.23 sane-backends-1.0.24 > sane-backends-1.0.23-1.0.24.diff -* check that the diff applies cleanly to the old version -* gzip the diff -* install devel headers required to build optional backends (1284,gphoto,etc) -* check that the new version .tar.gz can be compiled -* upload the .tar.gz, tar.gz.md5 and .diff.gz to the FTP/HTTP servers - (at the moment: alioth.debian.org, ftp files are in - /srv/alioth.debian.org/chroot/ftproot/pub/sane/ ) - In the alioth web interface, you should upload the smallest file first, - since you don't get error messages until after an upload completes, - and you might need to change something. - You can add the larger files afterwards. You may have to split larger - files. +* temporarily set a PRIVATE_TOKEN variable in the GitLab CI/CD + variables. You have to create one in your own Settings > Access + Tokens. Set it to expire the next day to avoid abuse. Better yet, + remove it from the CI/CD variables when the job is finished. +* git tag -a -s 1.0.28 -m Release +* git push --tags origin master +* trigger the manual 'release' stage of the build via the web UI when + this becomes possible. This requires a valid PRIVATE_TOKEN. -Announcing the release: +Updating the website and announcing the release: * checkout the sane/website.git module and: * copy sane-backends.html to sane-backends-"old-version".html * update sane-supported-devices.html with link to above "old" file * rebuild sane-backends.html and sane-mfgs.html (make -C doc html-pages) -* use man2html from http://hydra.nac.uci.edu/indiv/ehood/man2html.html +* [TBD] use man2html from http://hydra.nac.uci.edu/indiv/ehood/man2html.html to rebuild html man pages (make -C doc html-man) (no other version works) -* add md5 sum to sane-md5sums.txt -* check and update platforms page (sane-support.html) -* add announcement to index.html +* update announcement to index.html * git commit -a && git push -* check that website was updated automatically. if not, see: - /home/groups/sane/bin/update-htdocs.sh -* rebuild descriptions.db (make -C doc descriptions.db) -* scp doc/descriptions.db to alioth: - /home/groups/sane/search/release -* write announcements sane-devel, maybe others (e.g. freshmeat), - include the md5 hash +* check that website's pipeline succeeded +* announce release on sane-announce mailing list (and Cc: sane-devel). + Ping the sane-announce list's moderator (m. allan noah) to get your + post approved ASAP. After the release: -#### consider not adding old changelogs to release package -* move ChangeLog to ChangeLogs/ChangeLog-"version" -* start a new ChangeLog, with the following message: - -This file is automatically generated at release time using git commit messages. - -For the latest changes please refer to the output of `git log` or see: -https://alioth.debian.org/plugins/scmgit/cgi-bin/gitweb.cgi?p=sane/sane-backends.git;a=log - -* configure.ac: bump textual version & add 'git' suffix -* configure: regenerate with autoconf -* remove the ':new' tag from any new backends .desc files -* git add new files and commit -* git push && git push --tags (one of these might give an error 'remote: fatal: bad object 0000000000000000000000000000000000000000', try the other one) +* remove the ':new' tag from all doc/descriptions*/*.desc files +* git add new and changed files and commit +* git push diff --git a/doc/sane-abaton.man b/doc/sane-abaton.man index 84d8997..f1f33cb 100644 --- a/doc/sane-abaton.man +++ b/doc/sane-abaton.man @@ -14,7 +14,7 @@ is recognized, but support for it is untested. If you own a Abaton scanner other than the ones listed above that works with this backend, or if you own an Abaton scanner that does not work with this backend, please contact -.IR sane\-devel@lists.alioth.debian.org +.IR sane\-devel@alioth-lists.debian.net with the model number, so that arrangements can be made to include support for it. Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. @@ -107,7 +107,7 @@ former is more likely than the latter. If you have found something that you think is a bug, please attempt to recreate it with the SANE_DEBUG_ABATON environment variable set to 255, and send a report detailing the conditions surrounding the bug to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . .SH TODO .TP diff --git a/doc/sane-agfafocus.man b/doc/sane-agfafocus.man index f4c1852..34ec463 100644 --- a/doc/sane-agfafocus.man +++ b/doc/sane-agfafocus.man @@ -31,7 +31,7 @@ color scans. If you own a scanner other than the ones listed above that works with this backend, please let us know by sending the scanner's model name, SCSI id, and firmware revision to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. .PP @@ -107,11 +107,11 @@ variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. SANE_DEBUG_AGFAFOCUS values: -.sp +.sp .ft CR .nf Number Remark -\ +\ 0 print important errors (printed each time) 1 print errors 2 print sense @@ -151,7 +151,7 @@ SANE_DEBUG_AGFAFOCUS to 128 and try to regenerate the problem. Then send me a report with the log attached. .PP If you encounter a SCSI bus error or trimmed and/or displaced images please -also set the environment variable SANE_DEBUG_SANEI_SCSI to 128 before sending +also set the environment variable SANE_DEBUG_SANEI_SCSI to 128 before sending me the report. .SH TODO @@ -172,4 +172,3 @@ sane(7), sane\-scsi(5) .SH AUTHOR Ingo Schneider and Karl Anders \[/O]ygard. - diff --git a/doc/sane-apple.man b/doc/sane-apple.man index 7c55a5a..3418fd0 100644 --- a/doc/sane-apple.man +++ b/doc/sane-apple.man @@ -23,7 +23,7 @@ ColorOneScanner 24bit RGB color 3-pass If you own a Apple scanner other than the ones listed above that works with this backend, please let us know by sending the scanner's model name, SCSI id, and firmware revision to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . See http://www.sane\-project.org/mailing\-lists.html for details on how to subscribe to sane\-devel. @@ -216,7 +216,7 @@ SANE_DEBUG_APPLE to 255 and rerun the exact sequence of keystrokes and menu selections to reproduce it. Then send me a report with the log attached. .PP -If you have an Apple Macintosh with the AppleScanners driver installed, +If you have an Apple Macintosh with the AppleScanners driver installed, reporting to me which options are grayed out (inactive) in what modes would be very helpful. .PP diff --git a/doc/sane-artec.man b/doc/sane-artec.man index 5f700a8..9dd4f44 100644 --- a/doc/sane-artec.man +++ b/doc/sane-artec.man @@ -132,7 +132,7 @@ SANE_DEBUG_ARTEC values .ft CR .nf Number Remark -\ +\ 0 print important errors 1 print errors 2 print sense @@ -147,12 +147,12 @@ Number Remark 11 print called sane\-procedures 12 print sane infos 13 print sane option-control messages -\ +\ 50 print verbose data/debug messages -\ +\ == 100 print software RGB calibration data == 101 print raw data from scanner to artec.data.raw file -\ +\ == 128 print out all messages .fi .ft R diff --git a/doc/sane-artec_eplus48u.man b/doc/sane-artec_eplus48u.man index 19f461c..7e7ec37 100644 --- a/doc/sane-artec_eplus48u.man +++ b/doc/sane-artec_eplus48u.man @@ -139,6 +139,5 @@ Interpolation with 1200 dpi is weak. .PP Support for buttons is missing due to missing support in SANE. .PP -Please contact us if you find a bug: +Please contact us if you find a bug: .IR http://www.sane\-project.org/bugs.html . - diff --git a/doc/sane-as6e.man b/doc/sane-as6e.man index efaf0d5..2e7dbf6 100644 --- a/doc/sane-as6e.man +++ b/doc/sane-as6e.man @@ -7,20 +7,20 @@ sane\-as6e \- SANE backend for using the Artec AS6E parallel port interface scan The .B sane\-as6e library implements a SANE (Scanner Access Now Easy) backend -that provides access to Artec AS6E flatbed scanner. -.B It requires the as6edriver program in order to operate. +that provides access to Artec AS6E flatbed scanner. +.B It requires the as6edriver program in order to operate. The as6edriver program is .B not -included with the SANE package. -It can be found at +included with the SANE package. +It can be found at .BR http://as6edriver.sourceforge.net. See the as6edriver documentation for technical information. .PP The -.I as6edriver +.I as6edriver program must be in the path for executables ($PATH). Especially if you run .I saned -(the SANE network scanning daemon), take care to setup the path for +(the SANE network scanning daemon), take care to setup the path for .I inetd or .I xinetd @@ -29,7 +29,7 @@ correctly or place the program in a directory that is in the path. .PP .SH FILES -.B as6edriver +.B as6edriver \- driver program that controls the scanner. .SH SEE ALSO diff --git a/doc/sane-avision.man b/doc/sane-avision.man index 6a991b6..f0a5091 100644 --- a/doc/sane-avision.man +++ b/doc/sane-avision.man @@ -24,23 +24,23 @@ you try the first scans \- especially with film-scanners! .SH CONFIGURATION -The configuration file for this backend resides in +The configuration file for this backend resides in .IR @CONFIGDIR@/avision.conf . Its contents is a list of device names that correspond to Avision and Avision compatible scanners and backend-options. Empty lines and lines starting with -a hash mark (#) are ignored. A sample configuration file is shown below: +a hash mark (#) are ignored. A sample configuration file is shown below: .nf # this is a comment -\ +\ option force\-a4 option force\-a3 option skip\-adf option disable\-gamma\-table option disable\-calibration -\ - #scsi Vendor Model Type Bus Channel ID LUN +\ + #scsi Vendor Model Type Bus Channel ID LUN scsi AVISION scsi HP scsi /dev/scanner @@ -119,7 +119,7 @@ libusb corresponding to the USB scanner. For example "0x03f0 0x0701" or "libusb:002:003". See sane\-usb(5) for details. The program -.IR sane\-find\-scanner +.IR sane\-find\-scanner helps to find out the correct scsi or usb device name. A list with supported devices is built into the avision backend so @@ -161,7 +161,7 @@ environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. The debug level 7 is the author's preferred value to debug backend problems. -Example: +Example: export SANE_DEBUG_AVISION=7 .SH "SEE ALSO" diff --git a/doc/sane-bh.man b/doc/sane-bh.man index 8306976..2c0fadc 100644 --- a/doc/sane-bh.man +++ b/doc/sane-bh.man @@ -30,7 +30,7 @@ COPISCAN II 3338(A) Simplex Scanner (with ACE) .PP If you have a Bell+Howell scanner and are able to test it with this backend, please contact -.IR sane\-devel@lists.alioth.debian.org +.IR sane\-devel@alioth-lists.debian.net with the model number and testing results. Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. Additionally, the author is curious as to the likelihood of using @@ -38,17 +38,17 @@ this backend with the newer 4000 and 8000 series scanners. If you have such a beast, please let me know. .PP The Bell+Howell Copiscan II series document scanners are high -volume, high throughput scanners designed for document scanning +volume, high throughput scanners designed for document scanning applications. As such, they are lineart/grayscale scanners supporting -a fixed number of fairly low resolutions (e.g. 200/240/300dpi). -However, they do have a number of interesting and useful features -suited to needs of document imaging applications. +a fixed number of fairly low resolutions (e.g. 200/240/300dpi). +However, they do have a number of interesting and useful features +suited to needs of document imaging applications. This backend attempts to support as many of these features as possible. .PP The main technical reference used in writing this backend is the -.B Bell and Howell Copiscan II Remote SCSI Controller (RSC) OEM -.B Technical Manual Version 1.5. -The Linux SCSI programming HOWTO, the SANE API documentation, and +.B Bell and Howell Copiscan II Remote SCSI Controller (RSC) OEM +.B Technical Manual Version 1.5. +The Linux SCSI programming HOWTO, the SANE API documentation, and SANE source code were also extremely valuable resources. .PP @@ -80,9 +80,9 @@ The contents of the .I bh.conf file is a list of device names that correspond to Bell+Howell scanners. See sane\-scsi(5) on details of what constitutes a valid device name. -Additionally, options can be specified; these lines begin with the word "option". -Each option is described in detail below. Empty lines and lines starting -with a hash mark (#) are ignored. +Additionally, options can be specified; these lines begin with the word "option". +Each option is described in detail below. Empty lines and lines starting +with a hash mark (#) are ignored. .SH OPTIONS The following options can be specified in the @@ -99,9 +99,9 @@ These frames are generated based on the compression and barcode options. These frames are never sent in preview mode. .TP .B fake\-inquiry -This option is used for debugging purposes and its use is not encouraged. +This option is used for debugging purposes and its use is not encouraged. Essentially, it allows the backend to initialize in the absence of -a scanner. This is useful for development and not much else. +a scanner. This is useful for development and not much else. This option must be specified earlier in the configuration file than the devices which are to be "faked". @@ -144,8 +144,8 @@ levels reduce verbosity. .TP .B ADF support With document scanners, automatic document feeder (ADF) support is a key -feature. The backend supports the ADF by default and returns -.B SANE_STATUS_NO_DOCS +feature. The backend supports the ADF by default and returns +.B SANE_STATUS_NO_DOCS when the out-of-paper condition is detected. The SANE frontend .B scanadf is a command line frontend that supports multi-page scans. It has been @@ -158,8 +158,8 @@ scans is included in xsane version 0.35 and above. .B Duplex scanning Some models, such as the COPISCAN II 6338, support duplex scanning. That is, they scan both sides of the document during a single pass through the -scanner (the scanner has two cameras). This backend supports duplex -scanning (with the +scanner (the scanner has two cameras). This backend supports duplex +scanning (with the .B \-\-duplex option). The front and back page images are delivered consecutively as if they were separately scanned pages. @@ -167,16 +167,16 @@ as if they were separately scanned pages. .TP .B Hardware compression The scanner is capable of compressing the data into several industry -standard formats (CCITT G3, CCITT G3-2D, CCITT G4). This results in +standard formats (CCITT G3, CCITT G3-2D, CCITT G4). This results in increased performance as less data is passed from the scanner to the host over the SCSI bus. The backend supports these compression formats -via the +via the .B \-\-g31d, \-\-g32d, \-\-g42d options, respectively. Many SANE frontends are not equipped to deal with these formats, however. The SANE frontend .B scanadf -supports these optional frame formats. The compressed image data -is written directly to a file and can then be processed by a scan-script +supports these optional frame formats. The compressed image data +is written directly to a file and can then be processed by a scan-script using the .B \-\-scan\-script option. Examples of this are given on the scanadf homepage. @@ -197,18 +197,18 @@ parameters must remain constant during the entire batch. .TP .B Icon Generation The Icon function generates a thumbnail of the full page image, that can be -transferred as if it were a separate page. This allows the host to +transferred as if it were a separate page. This allows the host to quickly display a thumbnail representation during the scanning operation. -Perhaps this would be a great way of implementing a preview scan, but +Perhaps this would be a great way of implementing a preview scan, but since a normal scan is so quick, it might not be worth the trouble. .TP .B Multiple Sections Multiple sections (scanning sub-windows) can be defined for the front and -back pages. Each section can have different characteristics (e.g. geometry, +back pages. Each section can have different characteristics (e.g. geometry, compression). The sections are returned as if they were separately scanned images. Additionally sections can be used to greatly enhance the -accuracy and efficiency of the barcode/patchcode decoding process by +accuracy and efficiency of the barcode/patchcode decoding process by limiting the search area to a small subset of the page. Most Copiscan II series scanners support up to 8 user-defined sections. @@ -218,18 +218,18 @@ The RSC unit can recognize Bar and Patch Codes of various types embedded in the scanned image. The codes are decoded and the data is returned to the frontend as a text frame. The text is encoded in xml and contains a great deal of information about the decoded data such as the location -where it was found, its orientation, and the time it took to find. -Further information on the content of this text frame as well as some +where it was found, its orientation, and the time it took to find. +Further information on the content of this text frame as well as some barcode decoding examples can be found on the backend homepage. .SH LIMITATIONS .TP .B Decoding a single barcode type per scan The RSC unit can search for up to six different barcode types at a time. -While the code generally supports this as well, the +While the code generally supports this as well, the .B \-\-barcode\-search\-bar -option only allows the user to specify a single barcode type. -Perhaps another option which allows a comma separated list of barcode +option only allows the user to specify a single barcode type. +Perhaps another option which allows a comma separated list of barcode type codes could be added to address this. .TP .B Scanning a fixed number of pages in batch mode @@ -241,12 +241,12 @@ prior to initiating the last scan command. Currently, there is no mechanism available for the frontend to pass this knowledge to the backend. If batch mode is enabled and the \-\-end\-count terminates a scanadf session, an extra page will be pulled through the scanner, but is neither read -nor delivered to the frontend. The issue can be avoided by specifying +nor delivered to the frontend. The issue can be avoided by specifying \-\-batch=no when scanning a fixed number of pages. .TP .B Revision 1.2 Patch detector There is an enhanced patchcode detection algorithm available in the RSC -with revision 1.2 or higher that is faster and more reliable than the +with revision 1.2 or higher that is faster and more reliable than the standard Bar/Patch code decoder. This is not currently supported. .SH OPTIONS @@ -255,14 +255,14 @@ standard Bar/Patch code decoder. This is not currently supported. .TP .B \-\-preview[=(yes|no)] [no] Request a preview-quality scan. When preview is set to yes image -compression is disabled and the image is delivered in a +compression is disabled and the image is delivered in a SANE_FRAME_GRAY frame. .TP .B \-\-mode lineart|halftone [lineart] Selects the scan mode (e.g., lineart,monochrome, or color). .TP .B \-\-resolution 200|240|300dpi [200] -Sets the resolution of the scanned image. Each scanner model supports +Sets the resolution of the scanned image. Each scanner model supports a list of standard resolutions; only these resolutions can be used. .TP .B \-\-compression none|g31d|g32d|g42d [none] @@ -313,7 +313,7 @@ Bottom-right y position of scan area. .B Feeder Options: .TP .B \-\-source Automatic Document Feeder|Manual Feed Tray [Automatic Document Feeder] -Selects the scan source (such as a document feeder). This option is provided +Selects the scan source (such as a document feeder). This option is provided to allow multiple image scans with xsane; it has no other purpose. .TP .B \-\-batch[=(yes|no)] [no] @@ -329,7 +329,7 @@ affect both the front and back pages. .TP .B \-\-timeout\-adf 0..255 [0] Sets the timeout in seconds for the automatic document feeder (ADF). -The value 0 specifies the hardware default value which varies based +The value 0 specifies the hardware default value which varies based on the scanner model. .TP .B \-\-timeout\-manual 0..255 [0] @@ -388,40 +388,40 @@ feature is completely disabled. The valid barcode type are: .RS .br .B none -.br +.br .B ean\-8 .br .B ean\-13 -.br +.br .B reserved\-ean\-add -.br +.br .B code39 -.br +.br .B code2\-5\-interleaved -.br +.br .B code2\-5\-3lines\-matrix -.br +.br .B code2\-5\-3lines\-datalogic -.br +.br .B code2\-5\-5lines\-industrial -.br +.br .B patchcode -.br +.br .B codabar -.br +.br .B codabar\-with\-start\-stop -.br +.br .B code39ascii -.br +.br .B code128 -.br +.br .B code2\-5\-5lines\-iata .br .RE .TP .B \-\-barcode\-search\-count 1..7 [3] Number of times that the RSC performs the decoding algorithm. Specify -the smallest number possible to increase performance. If you are having +the smallest number possible to increase performance. If you are having trouble recognizing barcodes, it is suggested that you increase this option to its maximum value (7). .TP @@ -440,7 +440,7 @@ are: .RE .TP .B \-\-barcode\-hmin 0..1660mm [5] -Sets the barcode minimum height in millimeters (larger values increase +Sets the barcode minimum height in millimeters (larger values increase recognition speed). Of course the actual barcodes in the document must be of sufficient size. .TP @@ -450,67 +450,67 @@ expires, the decoder will stop trying to decode barcodes. .TP .B \-\-section <string> [] Specifies a series of image sections. A section can be used to gather -a subset image or to provide a small area for barcode decoding. +a subset image or to provide a small area for barcode decoding. Each section is specified in the following format (units are in millimeters): .PP .B <width>x<height>+<top-left-x>+<top-left-y>[:functioncode...] -.PP +.PP Multiple sections can be specified by separating them with commas. .PP For example .B 76.2x25.4+50.8+0:frontbar -identifies an area 3 inches wide and 1 inch high with a top left corner +identifies an area 3 inches wide and 1 inch high with a top left corner at the top of the page two inches from the left hand edge of the page. -This section will be used for barcode decoding on the front page only. +This section will be used for barcode decoding on the front page only. .PP For example -.B 50.8x25.4+25.4+0:frontbar:front:g42d -identifies an area 2 inches wide and 1 inch high with a top left corner -at the top of the page one inch from the left hand edge of the page. -This section will be used for barcode decoding on the front page as well -as generating an image compressed in g42d format. +.B 50.8x25.4+25.4+0:frontbar:front:g42d +identifies an area 2 inches wide and 1 inch high with a top left corner +at the top of the page one inch from the left hand edge of the page. +This section will be used for barcode decoding on the front page as well +as generating an image compressed in g42d format. .PP Ordinarily barcodes are searched in the entire image. However, when you specify sections all barcode searching is done within the specific sections -identified. This can significantly speed up the decoding process. +identified. This can significantly speed up the decoding process. The following functioncodes are available: .RS .br .B front \- generate an image for the front page section -.br +.br .B back \- generate an image for the back page section .br .B frontbar \- perform barcode search in front page section -.br +.br .B backbar \- perform barcode search in back page section .br .B frontpatch \- perform patchcode search in front page section -.br +.br .B backpatch \- perform patchcode search in back page section .br .B none \- use no image compression -.br +.br .B g31d \- use Group 3 1 dimension image compression -.br +.br .B g32d \- use Group 3 2 dimensions image compression -.br +.br .B g42d \- use Group 4 2 dimensions image compression .br .RE .PP If you omit a compression functioncode, the full page compression setting -is used. If you specify multiple compression functioncodes, only the +is used. If you specify multiple compression functioncodes, only the last one is used. .TP @@ -536,7 +536,7 @@ This is a new backend; detailed bug reports are welcome -- and expected ;) If you have found something that you think is a bug, please attempt to recreate it with the SANE_DEBUG_BH environment variable set to 255, and send a report detailing the conditions surrounding the bug to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . .SH "SEE ALSO" sane(7), sane\-scsi(5), scanimage(1), scanadf(1) diff --git a/doc/sane-canon.man b/doc/sane-canon.man index be7693c..6085b16 100644 --- a/doc/sane-canon.man +++ b/doc/sane-canon.man @@ -17,9 +17,9 @@ CanoScan FB620S .br CanoScan FB1200S .br -CanoScan FS2700F +CanoScan FS2700F .br -CanoScan FS2710S +CanoScan FS2710S .br .RE .PP @@ -44,7 +44,7 @@ FS2710S Ulrich Deiters <ukd@xenon.pc.uni\-koeln.de>. .SH TIPS (FS2700F) .PP Scanning either slides or negatives has been found to require rather -large gamma corrections of about 2.2 to 2.4 (same value for red, green, +large gamma corrections of about 2.2 to 2.4 (same value for red, green, and blue). It is recommended to use the automatic exposure controls of the frontend xsane for best results. .PP @@ -82,9 +82,9 @@ support dynamic loading). .B SANE_DEBUG_CANON If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_CANON=4 .SH "SEE ALSO" diff --git a/doc/sane-canon630u.man b/doc/sane-canon630u.man index bdfb874..e9ec3cd 100644 --- a/doc/sane-canon630u.man +++ b/doc/sane-canon630u.man @@ -26,10 +26,10 @@ The contents of the .I canon630u.conf file is a list of device names that correspond to Canon USB scanners. Empty lines and lines starting with a hash mark (#) are -ignored. Only one device name can be listed in +ignored. Only one device name can be listed in .IR canon630u.conf . The program -.IR sane\-find\-scanner +.IR sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/usb/scanner0 @@ -46,7 +46,7 @@ software was developed by analyzing the USB traffic of the Windows it seems to work for my scanner. If you have complaints, let me know. .PP This driver requires the ability to send USB Control Messages, available in -kernel 2.4.12 or later. +kernel 2.4.12 or later. .PP Some users have reported that this driver doesn't work at all. This seems to be a hardware specific issue, although I don't know what exactly the @@ -71,7 +71,7 @@ support dynamic loading). .I /tmp/canon.cal The calibration file used to normalize pixel brightness. This is calculated every time the scanner is first used after it has lost power. -Deleting this file will force recalibration. +Deleting this file will force recalibration. .SH ENVIRONMENT .TP .B SANE_CONFIG_DIR @@ -91,10 +91,10 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_CANON630U If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. Example: -.br +.br SANE_DEBUG_CANON630U=12 scanimage > /dev/null .SH "SEE ALSO" sane(7), sane\-usb(5), sane\-find\-scanner(1) @@ -103,4 +103,3 @@ http://canon-fb630u.sourceforge.net/ .br .SH AUTHOR Nathan Rutman - diff --git a/doc/sane-canon_dr.man b/doc/sane-canon_dr.man index 3e8ac06..4fbc635 100644 --- a/doc/sane-canon_dr.man +++ b/doc/sane-canon_dr.man @@ -5,16 +5,16 @@ sane\-canon_dr \- SANE backend for Canon DR-series scanners .SH DESCRIPTION -The +The .B sane\-canon_dr library implements a SANE (Scanner Access Now Easy) backend which provides access to some Canon DR-series scanners. -This document describes backend version 51, which shipped with SANE 1.0.25. +This document describes backend version 57, which shipped with SANE 1.0.28. .SH SUPPORTED HARDWARE -This version has only been tested with a few scanner models. Please see -http://www.sane\-project.org/sane\-supported\-devices.html for the most recent +This version has only been tested with a few scanner models. Please see +http://www.sane\-project.org/sane\-supported\-devices.html for the most recent list. This backend may support other Canon scanners. The best @@ -23,8 +23,8 @@ or to collect a trace of the windows driver in action. Please contact the author for help or with test results. In general, the larger machines (DR-4000 and up) which have been tested use -a fairly complete protocol, with hardware support for many modes, resolutions -and features. The smaller machines have many limitations, like missing +a fairly complete protocol, with hardware support for many modes, resolutions +and features. The smaller machines have many limitations, like missing horizontal resolutions, missing binary mode, always scanning full-width, etc. There is code in the backend to address these problems, but there seems to be no way to detect if they are required, so they must be hard-coded. @@ -32,26 +32,26 @@ no way to detect if they are required, so they must be hard-coded. .SH OPTIONS Effort has been made to expose most hardware options, including: .PP -source s +source s .RS Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex". .RE .PP -mode m +mode m .RS Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray", and "Color". .RE .PP -resolution +resolution .RS Controls scan resolution. .RE .PP tl\-x, tl\-y, br\-x, br\-y .RS -Sets scan area upper left and lower right coordinates. These are renamed +Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y by some frontends. .RE .PP @@ -67,37 +67,37 @@ enhancement, compression, buttons and sensors, etc. Additionally, several 'software' options are exposed by the backend. These are reimplementations of features provided natively by larger scanners, but running on the host computer. This enables smaller machines to have similar -capabilities. Please note that these features are somewhat simplistic, and -may not perform as well as the native implementations. Note also that these -features all require that the driver cache the entire image in memory. This +capabilities. Please note that these features are somewhat simplistic, and +may not perform as well as the native implementations. Note also that these +features all require that the driver cache the entire image in memory. This will almost certainly result in a reduction of scanning speed. .PP -swcrop +swcrop .RS -Requests the driver to detect the extremities of the paper within the larger -image, and crop the empty edges. +Requests the driver to detect the extremities of the paper within the larger +image, and crop the empty edges. .RE .PP -swdeskew +swdeskew .RS -Requests the driver to detect the rotation of the paper within the larger +Requests the driver to detect the rotation of the paper within the larger image, and counter the rotation. .RE .PP -swdespeck X +swdespeck X .RS -Requests the driver to find and remove dots of X diameter or smaller from the +Requests the driver to find and remove dots of X diameter or smaller from the image, and fill the space with the average surrounding color. .RE -Use 'scanimage \-\-help' to get a list, but be aware that some options may -be settable only when another option has been set, and that advanced options +Use 'scanimage \-\-help' to get a list, but be aware that some options may +be settable only when another option has been set, and that advanced options may be hidden by some frontend programs. .PP .SH CONFIGURATION FILE The configuration file "canon_dr.conf" is used to tell the backend how to look for scanners, and provide options controlling the operation of the backend. -This file is read each time the frontend asks the backend for a list +This file is read each time the frontend asks the backend for a list of scanners, generally only when the frontend starts. If the configuration file is missing, the backend will fail to run. .PP @@ -105,9 +105,9 @@ Scanners can be specified in the configuration file in 4 ways: .PP "scsi CANON DR" .RS -Requests backend to search all scsi busses in the system for a device +Requests backend to search all scsi busses in the system for a device which reports itself to be a scanner made by 'CANON', with a model name -starting with 'DR'. +starting with 'DR'. .RE .PP "scsi /dev/sg0" (or other scsi device file) @@ -119,7 +119,7 @@ specify one. Probably should not be used with the other "scsi" line above. .PP "usb 0x04a9 0x1603" (or other vendor/product ids) .RS -Requests backend to search all usb busses in the system for a device +Requests backend to search all usb busses in the system for a device which uses that vendor and product id. The device will then be queried to determine if it is a Canon scanner. .RE @@ -129,12 +129,12 @@ to determine if it is a Canon scanner. Some systems use a kernel driver to access usb scanners. This method is untested. .RE .PP -Besides the 'scsi' and 'usb' lines, the configuration file supports the +Besides the 'scsi' and 'usb' lines, the configuration file supports the following 'option' lines: .PP "option buffer-size [number of bytes]" .RS -Set the number of bytes in the data buffer to something other than the +Set the number of bytes in the data buffer to something other than the compiled\-in default of 4MB. Large values may cause timeouts or hangs, small values may cause slow scans. .PP @@ -150,7 +150,7 @@ warned. .br "option version-name [string of text]" .RS -These options can be used collectively to override the values provided by the +These options can be used collectively to override the values provided by the scanner, or to provide the values when the scanner cannot. .RE .PP @@ -189,12 +189,12 @@ enables debugging output to stderr. Valid values are: .RE .SH KNOWN ISSUES -This backend was entirely reverse engineered from usb traces of the proprietary +This backend was entirely reverse engineered from usb traces of the proprietary driver. Various advanced features of the machines may not be enabled. Many machines have not been tested. Their protocol is unknown. .SH CREDITS - + The various authors of the sane\-fujitsu backend provided useful code .br Yabarana Corp. www.yabarana.com provided significant funding @@ -218,4 +218,3 @@ sane\-usb(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-canon_pp.man b/doc/sane-canon_pp.man index ae307cb..46bb823 100644 --- a/doc/sane-canon_pp.man +++ b/doc/sane-canon_pp.man @@ -5,7 +5,7 @@ sane\-canon_pp \- SANE backend for Canon CanoScan Parallel Port flatbed scanners .SH DESCRIPTION The .B sane\-canon_pp -library implements a SANE (Scanner Access Now Easy) backend that provides +library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Canon flatbed scanners: .PP .RS @@ -25,11 +25,11 @@ CanoScan N640P ex .br .RE .PP -No USB scanners are supported and there are no plans to support them in the -future. Other projects are working on support for USB scanners. See the -.B PROJECTS +No USB scanners are supported and there are no plans to support them in the +future. Other projects are working on support for USB scanners. See the +.B PROJECTS file for more detail. The FB310P and FB610P are re-badged Avision scanners -which use a different command set, so are unlikely to be supported by this +which use a different command set, so are unlikely to be supported by this backend in the future. .PP IMPORTANT: this is alpha code. While we have made every effort to make it as @@ -42,77 +42,77 @@ below). . .PP .SH "DEVICE NAMES" -This backend expects device names of the form presented by libieee1284. These +This backend expects device names of the form presented by libieee1284. These names are highly dependent on operating system and version. -On Linux 2.4 kernels this will be of the form +On Linux 2.4 kernels this will be of the form .I "parport0" -or older (2.2 and before) kernels may produce names like +or older (2.2 and before) kernels may produce names like .IR "0x378" -(the base address of your port) or simply +(the base address of your port) or simply .IR "0" -depending on your module configuration. Check the contents of +depending on your module configuration. Check the contents of .I /proc/parport -if it exists. If you don't want to specify a default port (or don't know its +if it exists. If you don't want to specify a default port (or don't know its name), the backend should be able to detect which port your scanner is on. .SH CONFIGURATION The contents of the .I canon_pp.conf -file is a list of options for the driver to use. Empty lines and lines +file is a list of options for the driver to use. Empty lines and lines starting with a hash mark (#) are ignored. .PP The supported options are currently .BR ieee1284 , .BR calibrate , .BR init_mode , -and +and .BR force_nibble Option -.B ieee1284 +.B ieee1284 .IR port-name -defines which port to use. The format of port-name is OS dependent, based on +defines which port to use. The format of port-name is OS dependent, based on the names presented by libieee1284. Please only have one of these lines, or all but one will be ignored. -Option -.B calibrate -.IR cal-file +Option +.B calibrate +.IR cal-file .IR [port-name] -defines which calibration file to use on a per-port basis. If you only have -one parport, the port-name argument may be omitted \- but be careful as this +defines which calibration file to use on a per-port basis. If you only have +one parport, the port-name argument may be omitted \- but be careful as this will cause problems on multi-scanner systems. You may have as many of these -lines as you like, as long as each has a unique port name. The tilde (`~') -character is acceptable and will be expanded to the value of the HOME +lines as you like, as long as each has a unique port name. The tilde (`~') +character is acceptable and will be expanded to the value of the HOME environment. -Option +Option .B init_mode .IR <AUTO|FB620P|FB630P> .IR [portname] -defines which initialisation (wake-up) mode to use on a per-port basis. -If you only have one parport, the portname argument may be omitted \- but -be careful as this may cause problems on multi-scanner systems. -You may have as many of these lines as you like, as long as each has a unique -port name. The valid initialisation modes are FB620P (which strobes 10101010 -and 01010101 on the data pins), FB630P (which strobes 11001100 and 00110011 +defines which initialisation (wake-up) mode to use on a per-port basis. +If you only have one parport, the portname argument may be omitted \- but +be careful as this may cause problems on multi-scanner systems. +You may have as many of these lines as you like, as long as each has a unique +port name. The valid initialisation modes are FB620P (which strobes 10101010 +and 01010101 on the data pins), FB630P (which strobes 11001100 and 00110011 on the data pins) and AUTO, which will try FB630P mode first then FB620P mode second. The FB620P mode is also used by the FB320P. The FB630P mode is used by the FB330P, N340P, and N640P. Option .B force_nibble -forces the driver to use nibble mode even if ECP mode is reported to work by -libieee1284. This works-around the rare issue of ECP mode being reported to +forces the driver to use nibble mode even if ECP mode is reported to work by +libieee1284. This works-around the rare issue of ECP mode being reported to work by the library, then not working. .SH TIPS .PP -Hit the "Calibrate" button before scanning. It vastly improves the quality of +Hit the "Calibrate" button before scanning. It vastly improves the quality of scans. .PP -To enable automatic detection of your scanner, uncomment the "canon_pp" line +To enable automatic detection of your scanner, uncomment the "canon_pp" line from .I @CONFIGDIR@/dll.conf .PP @@ -127,40 +127,40 @@ below). The static library implementing this backend. .TP .I @LIBDIR@/libsane\-canon_pp.so -The shared library implementing this backend (present on systems that support +The shared library implementing this backend (present on systems that support dynamic loading). .SH ENVIRONMENT .TP .B SANE_CONFIG_DIR -This environment variable specifies the list of directories that may contain -the configuration file. Under UNIX, the directories are separated by a colon +This environment variable specifies the list of directories that may contain +the configuration file. Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable -is not set, the configuration file is searched in two default directories: -first, the current working directory (".") and then in @CONFIGDIR@. If the +is not set, the configuration file is searched in two default directories: +first, the current working directory (".") and then in @CONFIGDIR@. If the value of the environment variable ends with the directory separator character, -then the default directories are searched after the explicitly specified +then the default directories are searched after the explicitly specified directories. For example, setting .B SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "@CONFIGDIR@" being searched (in this order). .TP .B SANE_DEBUG_CANON_PP -If the library was compiled with debug support enabled, this environment -variable controls the debug level for this backend. Higher debug levels +If the library was compiled with debug support enabled, this environment +variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_CANON_PP=4 .SH NOTES .B Features available in the Windows interface .TP -.B Brightness and Contrast -These are not implemented, and probably never will be. These appear to be -implemented entirely in software. Use GIMP or a similar program if you need +.B Brightness and Contrast +These are not implemented, and probably never will be. These appear to be +implemented entirely in software. Use GIMP or a similar program if you need these features. .TP .B Descreen Mode -This appears on our first analysis to be just oversampling with an +This appears on our first analysis to be just oversampling with an anti-aliasing filter. Again, it seems to be implemented entirely in software, so GIMP is your best bet for now. .TP @@ -170,51 +170,51 @@ one returned during calibration) will be loaded. .PP .B Communication Problems .PP -ECP mode in libieee1284 doesn't always work properly, even with new hardware. +ECP mode in libieee1284 doesn't always work properly, even with new hardware. We believe that this is a ppdev problem. If you change the configuration file -to include +to include .B force_nibble , the problem will go away, but you will only be able to scan in nibble mode. .PP Sometimes the scanner can be left in a state where our code cannot revive it. -If the backend reports no scanner present, try unplugging the power and +If the backend reports no scanner present, try unplugging the power and plugging it back in. Also try unplugging printers from the pass-through port. .PP -The scanner will not respond correctly to our commands when you first plug in -the power. You may find if you try a scan very soon after plugging in the +The scanner will not respond correctly to our commands when you first plug in +the power. You may find if you try a scan very soon after plugging in the power that the backend will incorrectly report that you have no scanner present. -To avoid this, give it about 10 seconds to reset itself before attempting any +To avoid this, give it about 10 seconds to reset itself before attempting any scans. .PP .B Repeated Lines .PP Sometimes at high resolutions (ie. 600dpi) you will notice lines which appear twice. These lines correspond to points where the scanner head has stopped -during the scan (it stops every time the internal 64kb buffer is full). +during the scan (it stops every time the internal 64kb buffer is full). Basically it's a mechanical problem inside the scanner, that the tolerance of movement for a start/stop event is greater than 1/600 inches. I've never tried -the windows driver so I'm not sure how (or if) it works around this problem, -but as we don't know how to rewind the scanner head to do these bits again, +the windows driver so I'm not sure how (or if) it works around this problem, +but as we don't know how to rewind the scanner head to do these bits again, there's currently no nice way to deal with the problem. .PP .B Grey-scale Scans .PP -Be aware that the scanner uses the green LEDs to read grey-scale scans, meaning -green coloured things will appear lighter than normal, and red and blue -coloured items will appear darker than normal. For high-accuracy grey-scale -scans of colour items, it's best just to scan in colour and convert to +Be aware that the scanner uses the green LEDs to read grey-scale scans, meaning +green coloured things will appear lighter than normal, and red and blue +coloured items will appear darker than normal. For high-accuracy grey-scale +scans of colour items, it's best just to scan in colour and convert to grey-scale in graphics software such as the GIMP. .PP .B FB620P/FB320P Caveats .PP These models can not be reset in the same way as the others. The windows driver -doesn't know how to reset them either \- when left with an inconsistent scanner, +doesn't know how to reset them either \- when left with an inconsistent scanner, it will start scanning half way down the page! .PP Aborting is known to work correctly on the FB*30P models, and is known to be -broken on the FB*20P models. The FB620P which I tested on simply returns -garbage after a scan has been aborted using the method we know. -Aborting is able to leave the scanner in a state where it can be shut down, +broken on the FB*20P models. The FB620P which I tested on simply returns +garbage after a scan has been aborted using the method we know. +Aborting is able to leave the scanner in a state where it can be shut down, but not where another scan can be made. @@ -224,9 +224,8 @@ sane(7), sane\-dll(5) http://canon\-fb330p.sourceforge.net/ .SH AUTHOR -This backend is primarily the work of Simon Krix (Reverse Engineering), and -Matthew Duggan (SANE interface). +This backend is primarily the work of Simon Krix (Reverse Engineering), and +Matthew Duggan (SANE interface). .PP -Many thanks to Kevin Easton for his comments and help, and Kent A. Signorini +Many thanks to Kevin Easton for his comments and help, and Kent A. Signorini for his help with the N340P. - diff --git a/doc/sane-cardscan.man b/doc/sane-cardscan.man index 7c081af..e5872a8 100644 --- a/doc/sane-cardscan.man +++ b/doc/sane-cardscan.man @@ -5,16 +5,16 @@ sane\-cardscan \- SANE backend for Corex CardScan usb scanners .SH DESCRIPTION -The +The .B sane\-cardscan library implements a SANE (Scanner Access Now Easy) backend which provides access to the Corex CardScan 800c & 600c small-format scanners. -The backend supports only grayscale and color modes and media of +The backend supports only grayscale and color modes and media of (theoretically) infinite length. This backend may support other scanners. The best -way to determine level of support is to get a trace of the windows +way to determine level of support is to get a trace of the windows driver in action, and send it to the author. .SH OPTIONS @@ -28,7 +28,7 @@ Selects the mode for the scan. Options are "Gray" and "Color". .SH CONFIGURATION FILE The configuration file "cardscan.conf" is used to tell the backend how to look for scanners, and provide options controlling the operation of the backend. -This file is read each time the frontend asks the backend for a list +This file is read each time the frontend asks the backend for a list of scanners, generally only when the frontend starts. If the configuration file is missing, the backend will use a set of compiled defaults, which are identical to the default configuration file shipped with SANE. @@ -37,7 +37,7 @@ Scanners can be specified in the configuration file in 2 ways: .PP "usb 0x04c5 0x1042" (or other vendor/product ids) .RS -Requests backend to search all usb busses in the system for a device +Requests backend to search all usb busses in the system for a device which uses that vendor and product id. The device will then be queried to determine if it is a cardscan scanner. .RE @@ -91,11 +91,11 @@ cannot set x/y coordinate values, resolutions, etc. These things could be simulated in the backend, but there are plenty of command line tools. .br .br -The backend also does not send all the commands that the windows driver +The backend also does not send all the commands that the windows driver does, so it may not function the same. .br .br -The backend does not have the calibration or ejection options of the +The backend does not have the calibration or ejection options of the windows driver. .br .br @@ -111,4 +111,3 @@ sane\-usb(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-config.man b/doc/sane-config.man index 42c6f9a..997a342 100644 --- a/doc/sane-config.man +++ b/doc/sane-config.man @@ -37,7 +37,7 @@ frontend to libsane. .B \-\-cflags Print the compiler flags that are necessary to compile a .B SANE -frontend. +frontend. .TP 8 .B \-\-prefix Print the prefix used during compilation of libsane. diff --git a/doc/sane-coolscan.man b/doc/sane-coolscan.man index 5952039..65c8d53 100644 --- a/doc/sane-coolscan.man +++ b/doc/sane-coolscan.man @@ -6,7 +6,7 @@ sane\-coolscan \- SANE backend for Nikon film-scanners .SH ABOUT THIS FILE -This file is a short description of the coolscan-backend for sane! +This file is a short description of the coolscan-backend for sane! .SH DESCRIPTION @@ -18,22 +18,22 @@ library implements a SANE backend that provides the interface to the following N .SH CONFIGURATION -The configuration file for this backend resides in +The configuration file for this backend resides in .IR @CONFIGDIR@/coolscan.conf . Its contents is a list of device names that correspond to Nikon Coolscan scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is -shown below: +shown below: .nf - #scsi Vendor Model Type - scsi Nikon * Scanner - /dev/scanner + #scsi Vendor Model Type + scsi Nikon * Scanner + /dev/scanner .fi The special device name must be a generic SCSI device or a symlink to such a device. To find out to which device your scanner is assigned and how you have to set the -permissions of that device, have a look at sane\-scsi. +permissions of that device, have a look at sane\-scsi. .SH SCSI ADAPTER TIPS diff --git a/doc/sane-coolscan2.man b/doc/sane-coolscan2.man index af27f1a..71f589a 100644 --- a/doc/sane-coolscan2.man +++ b/doc/sane-coolscan2.man @@ -6,12 +6,12 @@ sane\-coolscan2 \- SANE backend for Nikon Coolscan film scanners The .B sane\-coolscan2 library implements a SANE (Scanner Access Now Easy) backend that -provides access to Nikon Coolscan film scanners. Some functions of this +provides access to Nikon Coolscan film scanners. Some functions of this backend should be considered .B beta-quality -software. Most functions have been stable for a long time, but of +software. Most functions have been stable for a long time, but of course new development can not and will not function properly from -the very first day. Please report any strange behaviour to the +the very first day. Please report any strange behaviour to the maintainer of the backend. .PP @@ -38,7 +38,7 @@ report successes or failures. The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in xscanimage or xsane. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d coolscan2:<interface>:<device> .RE @@ -69,7 +69,7 @@ unit is mm). .I \-\-infrared=yes/no If set to "yes", the scanner will read the infrared channel, thus allowing defect removal in software. The infrared image is read during a second scan, -with no options altered. The backend must not be restarted between the scans. +with no options altered. The backend must not be restarted between the scans. If you use scanimage, perform a batch scan with batch\-count=2 to obtain the IR information. .TP diff --git a/doc/sane-coolscan3.man b/doc/sane-coolscan3.man index 364d5ef..238f127 100644 --- a/doc/sane-coolscan3.man +++ b/doc/sane-coolscan3.man @@ -6,11 +6,11 @@ sane\-coolscan3 \- SANE backend for Nikon Coolscan film scanners The .B sane\-coolscan3 library implements a SANE (Scanner Access Now Easy) backend that -provides access to Nikon Coolscan film scanners. Some functions of this -backend should be considered +provides access to Nikon Coolscan film scanners. Some functions of this +backend should be considered .B beta-quality -software. Most functions have been stable for a long time, but of -course new development can not and will not function properly from +software. Most functions have been stable for a long time, but of +course new development can not and will not function properly from the very first day. .PP @@ -31,27 +31,27 @@ LS-8000 ED IEEE 1394 .ft R .RE -Please send mail to sane-devel@lists.alioth.debian.org to report successes +Please send mail to sane-devel@alioth-lists.debian.net to report successes or failures. .SH OPTIONS -The options the backend supports can either be selected through command line +The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in xscanimage or xsane. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d coolscan3:<interface>:<device> .RE where <interface> and <device> specify the device in question, as in the configuration file (see next section). The \-d parameter and its argument can be omitted to obtain information on the first scanner identified. Use -the command +the command .RS scanimage \-L .RE to list all devices recognized by your SANE installation. -The options should be fully described by the description or tooltips given by +The options should be fully described by the description or tooltips given by frontend. Here is a description of some of the most important options, in the syntax with which they must be supplied to scanimage: .TP @@ -69,7 +69,7 @@ unit is mm). .I \-\-infrared=yes/no If set to "yes", the scanner will read the infrared channel, thus allowing defect removal in software. The infrared image is read during a second scan, -with no options altered. The backend must not be restarted between the scans. +with no options altered. The backend must not be restarted between the scans. If you use scanimage, perform a batch scan with batch\-count=2 to obtain the IR information. .TP @@ -109,7 +109,7 @@ Eject the film strip or mounted slide when using the slide loader. Reset scanner. The scanner will perform the same action as when power is turned on: it will eject the film strip and calibrate itself. Use this whenever the scanner refuses to load a film strip properly, as a result of -which +which .I \-\-eject does not work. @@ -126,7 +126,7 @@ entries are case-sensitive: These lines are ignored, thus '#' can be used to include comments. .TP .I containing only the word """auto""" -This instructs the backend to probe for a scanner by scanning the buses for +This instructs the backend to probe for a scanner by scanning the buses for devices with know identifiers. This is the action taken when no configuration file is present. .TP @@ -178,5 +178,4 @@ No real bugs currently known, please report any to the SANE developers' list. .SH AUTHORS coolscan3 written by A. Zummo (a.zummo@towertech.it), based heavily on -coolscan2 written by Andr\['a]s Major (andras@users.sourceforge.net). - +coolscan2 written by Andr\['a]s Major (andras@users.sourceforge.net). diff --git a/doc/sane-dc210.man b/doc/sane-dc210.man index bc0db75..7d3ad65 100644 --- a/doc/sane-dc210.man +++ b/doc/sane-dc210.man @@ -14,15 +14,15 @@ connected. The device name is always "0". .SH CONFIGURATION The contents of the .I dc210.conf -specify the serial port and baud rate to use. The baud rate +specify the serial port and baud rate to use. The baud rate specifies the maximum rate to use while downloading pictures. (The camera is always initialized using 9600 baud, then switches to the higher rate). On my 90MHz Pentium, I usually have no problems downloading -at 115200 baud as long as the system is not excessively busy and +at 115200 baud as long as the system is not excessively busy and the "interrupt-unmask flag" is set in the IDE driver (hdparm \-u1). Supported baud rates are: 9600, 19200, 38400, 57600, and 115200. .PP -The dumpinquiry line causes some information about the camera to +The dumpinquiry line causes some information about the camera to be printed. .PP cmdrespause specifies how many usec (1,000,000ths of a) between @@ -30,7 +30,7 @@ writing the command and reading the result should be used. 125000 seems to be the lowest I could go reliably. .PP breakpause is the time in 1,000,000ths of a usec between sending the -"back to default" break sending commands. +"back to default" break sending commands. .PP Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below: @@ -81,7 +81,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .TP .B SANE_DEBUG_DC210 If the library was compiled with debugging support enabled, this -environment variable controls the debug level for this backend. +environment variable controls the debug level for this backend. A value of 128 requests maximally copious debug output; smaller levels reduce verbosity. @@ -101,7 +101,7 @@ Henning Meier-Geinitz. Known bugs/limitations are: ? .PP More general comments, suggestions, and inquiries about frontends -or SANE should go to the SANE Developers mailing list -(see http://www.sane\-project.org/mailing\-lists.html for details). +or SANE should go to the SANE Developers mailing list +(see http://www.sane\-project.org/mailing\-lists.html for details). You must be subscribed to the list, otherwise your mail won't be sent to the subscribers. diff --git a/doc/sane-dc240.man b/doc/sane-dc240.man index ba7fd63..70629ab 100644 --- a/doc/sane-dc240.man +++ b/doc/sane-dc240.man @@ -14,16 +14,16 @@ connected. The device name is always "0". .SH CONFIGURATION The contents of the .I dc240.conf -specify the serial port and baud rate to use. The baud rate +specify the serial port and baud rate to use. The baud rate specifies the maximum rate to use while downloading pictures. (The camera is always initialized using 9600 baud, then switches to the higher rate). On a 450MHz Pentium, I usually have no problems downloading at 115200 baud, though the camera sometimes has to resend packets due -to lost characters. Results are better when +to lost characters. Results are better when the "interrupt-unmask flag" is set in the IDE driver (hdparm \-u1). Supported baud rates are: 9600, 19200, 38400, 57600, and 115200. .PP -The dumpinquiry line causes some information about the camera to +The dumpinquiry line causes some information about the camera to be printed. .PP cmdrespause specifies how many usec (1,000,000ths of a) between @@ -31,7 +31,7 @@ writing the command and reading the result should be used. 125000 seems to be the lowest I could go reliably. .PP breakpause is the time in 1,000,000ths of a usec between sending the -"back to default" break sending commands. +"back to default" break sending commands. .PP Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below: @@ -82,7 +82,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .TP .B SANE_DEBUG_DC240 If the library was compiled with debugging support enabled, this -environment variable controls the debug level for this backend. +environment variable controls the debug level for this backend. A value of 128 requests maximally copious debug output; smaller levels reduce verbosity. @@ -101,13 +101,12 @@ The manpage was largely copied from the dc210 manpage. .SH BUGS The major limitation that I know of is that the backend assumes the directory in the camera is 100dc240. Once the camera has -taken more than 9999 pictures, the directory will increment to 101dc240. +taken more than 9999 pictures, the directory will increment to 101dc240. Not only should we check for the additional directory, but pictures may actually be found in multiple directories. .PP More general comments, suggestions, and inquiries about frontends -or SANE should go to the SANE Developers mailing list -(see http://www.sane\-project.org/mailing\-lists.html for details). +or SANE should go to the SANE Developers mailing list +(see http://www.sane\-project.org/mailing\-lists.html for details). You must be subscribed to the list, otherwise your mail won't be sent to the subscribers. - diff --git a/doc/sane-dc25.man b/doc/sane-dc25.man index eabe765..889fd2d 100644 --- a/doc/sane-dc25.man +++ b/doc/sane-dc25.man @@ -15,15 +15,15 @@ connected. The device name is always "0". .SH CONFIGURATION The contents of the .I dc25.conf -specify the serial port and baud rate to use. The baud rate +specify the serial port and baud rate to use. The baud rate specifies the maximum rate to use while downloading pictures. (The camera is always initialized using 9600 baud, then switches to the higher rate). On my 90MHz Pentium, I usually have no problems downloading -at 115200 baud as long as the system is not excessively busy and +at 115200 baud as long as the system is not excessively busy and the "interrupt-unmask flag" is set in the IDE driver (hdparm \-u1). Supported baud rates are: 9600, 19200, 38400, 57600, and 115200. .PP -The dumpinquiry line causes some information about the camera to +The dumpinquiry line causes some information about the camera to be printed to stderr during startup. Note: This is not compatible with saned, so make sure you don't have any dumpinquiry lines if you are using saned (i.e. scanning on a remote machine using a @@ -74,7 +74,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .TP .B SANE_DEBUG_DC25 If the library was compiled with debugging support enabled, this -environment variable controls the debug level for this backend. +environment variable controls the debug level for this backend. A value of 128 requests maximally copious debug output; smaller levels reduce verbosity. @@ -93,7 +93,7 @@ slider that is used to select the picture from the camera may not be updated immediately. .PP More general comments, suggestions, and inquiries about frontends -or SANE should go to the SANE Developers mailing list -(see http://www.sane\-project.org/mailing\-lists.html for details). +or SANE should go to the SANE Developers mailing list +(see http://www.sane\-project.org/mailing\-lists.html for details). You must be subscribed to the list, otherwise your mail won't be sent to the subscribers. diff --git a/doc/sane-dll.man b/doc/sane-dll.man index 54f9686..e93f897 100644 --- a/doc/sane-dll.man +++ b/doc/sane-dll.man @@ -55,11 +55,11 @@ mustek .PP It is also possible to add a file in .I @CONFIGDIR@/dll.d -that contains the list of backends to be added. Backends mentioned in a -file included in this directory will be added before any backends listed -in +that contains the list of backends to be added. Backends mentioned in a +file included in this directory will be added before any backends listed +in .I dll.conf. -Files in +Files in .I @CONFIGDIR@/dll.d can be freely named. They shall follow the format conventions as apply for .I dll.conf. @@ -76,7 +76,7 @@ in file backend/Makefile.in of the SANE source code distribution. After changing the value of this macro, it is necessary to reconfigure, rebuild, and reinstall SANE for the change to take effect. -Aliases are defined in the config file +Aliases are defined in the config file .IR dll.aliases . It can contain entries of the form .PP @@ -152,7 +152,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller -levels reduce verbosity. +levels reduce verbosity. .ft CR .nf @@ -165,7 +165,7 @@ Value Description .fi .ft R -Example: +Example: export SANE_DEBUG_DLL=3 diff --git a/doc/sane-epjitsu.man b/doc/sane-epjitsu.man index 3552691..9a31da2 100644 --- a/doc/sane-epjitsu.man +++ b/doc/sane-epjitsu.man @@ -5,12 +5,12 @@ sane\-epjitsu \- SANE backend for Epson-based Fujitsu USB scanners. .SH DESCRIPTION -The +The .B sane\-epjitsu library implements a SANE (Scanner Access Now Easy) backend which provides basic access the Fujitsu fi\-60F/fi\-65F and ScanSnap S300/S1300(i)/S1100(i) scanners. .SH HARDWARE SUPPORT -These scanners are fairly limited, only supporting a couple of modes and resolutions, and always scanning full width. The backend supports missing modes (binary, grayscale) and intermediate resolutions in software, but provides only minimal scan area controls. See +These scanners are fairly limited, only supporting a couple of modes and resolutions, and always scanning full width. The backend supports missing modes (binary, grayscale) and intermediate resolutions in software, but provides only minimal scan area controls. See .B KNOWN ISSUES. This backend may support other scanners. If physical inspection reveals an Epson chipset, please contact the author for instructions on collecting a USB trace under Windows to verify. @@ -18,12 +18,12 @@ This backend may support other scanners. If physical inspection reveals an Epson .SH OPTIONS A limited effort has been made to expose the standard options to the API. This allows a frontend to set resolution, color mode, and choose the ADF setting. The epjitsu backend supports the following basic options for most scanners: .PP -source s +source s .RS Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex". .RE .PP -mode m +mode m .RS Selects the mode for the scan. Options may include "Lineart", "Gray", "Color". .RE @@ -52,13 +52,13 @@ Some systems use a kernel driver to access usb scanners. This method is untested .PP The only configuration option supported is "firmware /PATH/TO/FILE", allowing you to set the location of the firmware file you have extracted from the Windows driver. .PP -.B Note: +.B Note: This firmware is a copyrighted work of Fujitsu, so cannot be provided by the backend or the author. Please do not ask. .PP -.B Note: +.B Note: These scanners REQUIRE a firmware file to function. See the supplied configuration file for more detail. .PP -.B Note: +.B Note: This option may appear multiple times in the configuration file. It only applies to scanners discovered by 'usb' lines that follow this option. .PP @@ -103,4 +103,3 @@ sane\-usb(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-epson.man b/doc/sane-epson.man index af2b3cf..f09f075 100644 --- a/doc/sane-epson.man +++ b/doc/sane-epson.man @@ -6,12 +6,12 @@ sane\-epson \- SANE backend for EPSON scanners The .B sane\-epson library implements a SANE (Scanner Access Now Easy) backend that -provides access to Epson flatbed scanners. Some functions of this +provides access to Epson flatbed scanners. Some functions of this backend should be considered .B beta-quality -software! Most functions have been stable for a long time, but of +software! Most functions have been stable for a long time, but of course new development can not and often times will not function properly from -the very first day. Please report any strange behavior to the +the very first day. Please report any strange behavior to the maintainer of the backend. .PP At present, the following scanners are known to work with this backend: @@ -48,23 +48,23 @@ CX-5200 USB and many more. The official list is on the Sane web site. .RE -For other scanners the software may or may not work. Please send mail to +For other scanners the software may or may not work. Please send mail to the backend author (khk@khk.net) to report success with scanners not on -the list or problems with scanners that are listed. +the list or problems with scanners that are listed. .SH OPTIONS The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in programs like xscanimage or xsane. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d epson .RE Not all devices support all options. .TP .I Scan Mode -The -.I \-\-mode +The +.I \-\-mode switch selects the basic mode of operation of the scanner. Valid choices are Binary, Gray and Color. The Binary mode is black and white only, Gray will produce 256 levels of gray or more depending on the scanner @@ -89,7 +89,7 @@ are "None", "Halftone A (Hard Tone)", "Halftone B (Soft Tone)", "Halftone C (4x4 Net Screen)", "Dither D (8x4 Net Screen)", "Text Enhanced Technology", "Download pattern A", and "Download pattern B". -The +The .I \-\-dropout switch selects the so called dropout color. Valid options are None, Red, Green and Blue. The default is None. The dropout color is used for @@ -109,62 +109,62 @@ switch sets the sharpness of the image data. Valid options are integer values from \-2 to 2, with \-2 meaning "Defocus", \-1 "Defocus slightly", 0 "Normal", 1 "Sharpen slightly" and 2 "Sharpen". -The +The .I \-\-gamma\-correction switch controls the scanner's internal gamma correction. Valid options are "Default", "User defined", "High density printing" "Low density printing" and "High contrast printing". -The +The .I \-\-color\-correction switch controls the scanner's internal color correction function. Valid options are "No Correction", "Impact\-dot printers", "Thermal printers", "Ink\-jet printers" and "CRT monitors". The default is "CRT monitors". -The +The .I \-\-resolution switch selects the resolution for a scan. Some EPSON scanners will scan in any resolution between the lowest and highest possible value. The list reported by the scanner can be displayed using the "\-\-help \-d epson" parameters to scanimage. -The +The .I \-\-mirror option controls the way the image is scanned. By reading the image data from right to left the image is mirrored. Valid options are "yes" and "no". The default is "no". -The +The .I \-\-speed option can improve the scan speed in monochrome mode. Valid options are "yes" or "no", the "yes" option will speed up the scan if this option is supported. -The -.I \-\-auto\-area\-segmentation +The +.I \-\-auto\-area\-segmentation switch activates the automatic area segmentation for monochrome scans. The scanner will try to determine which areas are text and which contain images. The image areas will be halftoned, and the text will be improved. Valid options are "yes" and "no". The default is "yes". -The +The .I \-\-gamma\-table parameter can be used to download a user defined gamma table. The option takes 256 values from the range 0-255. In color mode this option equally affects the red, green, and blue channel. -The -.I \-\-red\-gamma\-table +The +.I \-\-red\-gamma\-table parameter can be used to download a user defined gamma table for the red channel. The valid options are the same as for \-\-gamma\-table. -The -.I \-\-green\-gamma\-table +The +.I \-\-green\-gamma\-table parameter can be used to download a user defined gamma table for the green channel. The valid options are the same as for \-\-gamma\-table. -The -.I \-\-blue\-gamma\-table +The +.I \-\-blue\-gamma\-table parameter can be used to download a user defined gamma table for the blue channel. The valid options are the same as for \-\-gamma\-table. @@ -173,19 +173,19 @@ The color correction coefficients will install color correction coefficients for the user defined color correction. Values are specified as integers in the range \-127..127. -The +The .I \-\-preview -option requests a preview scan. The frontend software automatically selects a low +option requests a preview scan. The frontend software automatically selects a low resolution. Valid options are "yes" and "no". The default is "no". -The +The .I \-\-preview\-speed options will increase the scan speed if this is supported by the scanner. Valid options are "yes" and "no", the default is "no". The geometry options -.I \-l \-t \-x \-y +.I \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters. @@ -201,9 +201,9 @@ The option selects the scan source. Valid options depend on the installed options. The default is "Flatbed". -The +The .I \-\-auto\-eject -option will eject a page after scanning from the document feeder. +option will eject a page after scanning from the document feeder. The .I \-\-film\-type @@ -222,7 +222,7 @@ will ignore this option. .SH CONFIGURATION FILE -The configuration file @CONFIGDIR@/epson.conf specifies the device(s) that the +The configuration file @CONFIGDIR@/epson.conf specifies the device(s) that the backend will use. Possible connection types are: .TP .I SCSI @@ -230,22 +230,22 @@ This is the default, and if nothing else is specified the backend software will open a given path as SCSI device. More information about valid syntax for SCSI devices can be found in sane\-scsi(5). .br -Usually SCSI scanners are configured with a line "scsi EPSON" in this file. In +Usually SCSI scanners are configured with a line "scsi EPSON" in this file. In some cases it may be necessary to only use the string "scsi" (e.g. for the GT-6500). .TP .I PIO \- Parallel Interface The parallel interface can be configured in two ways: An integer value starting at the beginning of a line will be interpreted as the IO address of the parallel -port. To make it clearer that a configured IO address is a parallel port the +port. To make it clearer that a configured IO address is a parallel port the port address can be preceded by the string "PIO". The PIO connection does not use a special device file in the /dev directory. The IO address can be specified in hex mode (prefixed with "0x"). .TP .I USB -A device file that is preceded by the string "USB" is treated as a scanner +A device file that is preceded by the string "USB" is treated as a scanner connected via the Universal Serial Bus. The correct special device file has -to be created prior to using it with Sane. See the USB documentation for -more information about how to set up the USB subsystem and the required +to be created prior to using it with Sane. See the USB documentation for +more information about how to set up the USB subsystem and the required device files. .SH FILES .TP @@ -265,14 +265,14 @@ levels reduce verbosity. .TP .B SANE_DEBUG_EPSON_SCSI If the library was compiled with debug support enabled, this -environment variable controls the SCSI related debug level for this backend. +environment variable controls the SCSI related debug level for this backend. Only a value of 2 is supported. .TP .B SANE_EPSON_CMD_LVL This allows one to override the function or command level that the backend uses to communicate with the scanner. The function level a scanner supports is determined during the initialization of the device. If -the backend does not recognize the function level reported by the +the backend does not recognize the function level reported by the scanner it will default to function level B3. Valid function levels are A1, A2, B1, B2, B3, B4, B5, B6, B7, B8, D1 and F5. Use this feature only if you know what you are doing! @@ -286,18 +286,18 @@ sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1) None :-) At least none are currently known. .SH UNSUPPORTED DEVICES -The backend may be used with Epson scanners that are not yet listed +The backend may be used with Epson scanners that are not yet listed under the list of supported devices. A scanner that is not recognized -may default to the function level B3, which means that not all -functions that the scanner may be capable of are accessible. +may default to the function level B3, which means that not all +functions that the scanner may be capable of are accessible. If the scanner is not even recognized as an Epson scanner this is probably because the device name reported by the scanner is not in the correct format. Please send this information to the backend maintainer (email address is in the AUTHOR section of this man page or in the -AUTHORS file of the SANE distribution). +AUTHORS file of the SANE distribution). -The Perfection 600, Perfection 650, Perfection 660, Perfection 1250 and +The Perfection 600, Perfection 650, Perfection 660, Perfection 1250 and Perfection 1260 are not supported by this backend. .SH AUTHOR diff --git a/doc/sane-epson2.man b/doc/sane-epson2.man index 6d47eea..33acd78 100644 --- a/doc/sane-epson2.man +++ b/doc/sane-epson2.man @@ -13,11 +13,11 @@ include network access. .PP Because .B sane\-epson -and -.B sane\-epson2 +and +.B sane\-epson2 drivers support many of the same devices, if one driver gives you problems you may try disabling it to try the other. -This can be done by removing the driver name from the +This can be done by removing the driver name from the .I dll.conf or perhaps by commenting out the options in .I epson.conf @@ -94,23 +94,23 @@ V750 USB, IEEE-1394 and many more. The official list is on the Sane web site. .RE -For other scanners the software may or may not work. Please send mail to +For other scanners the software may or may not work. Please send mail to the sane-backend mailing list to report success with scanners not on -the list or problems with scanners that are listed. +the list or problems with scanners that are listed. .SH OPTIONS The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in programs like xscanimage or xsane. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d epson2 .RE Not all devices support all options. .TP .I Scan Mode -The -.I \-\-mode +The +.I \-\-mode switch selects the basic mode of operation of the scanner. Valid choices are Binary, Gray and Color. The Binary mode is black and white only, Gray will produce 256 levels of gray or more depending on the scanner @@ -135,7 +135,7 @@ are "None", "Halftone A (Hard Tone)", "Halftone B (Soft Tone)", "Halftone C (4x4 Net Screen)", "Dither D (8x4 Net Screen)", "Text Enhanced Technology", "Download pattern A", and "Download pattern B". -The +The .I \-\-dropout switch selects the so called dropout color. Valid options are None, Red, Green and Blue. The default is None. The dropout color is used for @@ -155,54 +155,54 @@ switch sets the sharpness of the image data. Valid options are integer values from \-2 to 2, with \-2 meaning "Defocus", \-1 "Defocus slightly", 0 "Normal", 1 "Sharpen slightly" and 2 "Sharpen". -The +The .I \-\-gamma\-correction switch controls the scanner's internal gamma correction. Valid options are "Default", "User defined", "High density printing" "Low density printing" and "High contrast printing". -The +The .I \-\-color\-correction switch controls the scanner's internal color correction function. Valid options are "No Correction", "Impact\-dot printers", "Thermal printers", "Ink\-jet printers" and "CRT monitors". The default is "CRT monitors". -The +The .I \-\-resolution switch selects the resolution for a scan. Some EPSON scanners will scan in any resolution between the lowest and highest possible value. The list reported by the scanner can be displayed using the "\-\-help \-d epson" parameters to scanimage. -The +The .I \-\-threshold switch selects the minimum brightness to get a white point. -The +The .I \-\-mirror option controls the way the image is scanned. By reading the image data from right to left the image is mirrored. Valid options are "yes" and "no". The default is "no". -The -.I \-\-auto\-area\-segmentation +The +.I \-\-auto\-area\-segmentation switch activates the automatic area segmentation for monochrome scans. The scanner will try to determine which areas are text and which contain images. The image areas will be halftoned, and the text will be improved. Valid options are "yes" and "no". The default is "yes". -The -.I \-\-red\-gamma\-table +The +.I \-\-red\-gamma\-table parameter can be used to download a user defined gamma table for the red channel. The valid options are the same as for \-\-gamma\-table. -The -.I \-\-green\-gamma\-table +The +.I \-\-green\-gamma\-table parameter can be used to download a user defined gamma table for the green channel. The valid options are the same as for \-\-gamma\-table. -The -.I \-\-blue\-gamma\-table +The +.I \-\-blue\-gamma\-table parameter can be used to download a user defined gamma table for the blue channel. The valid options are the same as for \-\-gamma\-table. @@ -216,13 +216,13 @@ The color correction coefficients will install color correction coefficients for the user defined color correction. Values are specified as integers in the range \-127..127. -The +The .I \-\-preview -option requests a preview scan. The frontend software automatically selects a low +option requests a preview scan. The frontend software automatically selects a low resolution. Valid options are "yes" and "no". The default is "no". The geometry options -.I \-l \-t \-x \-y +.I \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters. @@ -232,9 +232,9 @@ The option selects the scan source. Valid options depend on the installed options. The default is "Flatbed". -The +The .I \-\-auto\-eject -option will eject a page after scanning from the document feeder. +option will eject a page after scanning from the document feeder. The .I \-\-film\-type @@ -264,7 +264,7 @@ The option select the ADF mode (simplex/duplex). .SH CONFIGURATION FILE -The configuration file @CONFIGDIR@/epson2.conf specifies the device(s) that the +The configuration file @CONFIGDIR@/epson2.conf specifies the device(s) that the backend will use. Possible connection types are: .TP .I SCSI @@ -272,28 +272,28 @@ This is the default, and if nothing else is specified the backend software will open a given path as SCSI device. More information about valid syntax for SCSI devices can be found in sane\-scsi(5). .br -Usually SCSI scanners are configured with a line "scsi EPSON" in this file. In +Usually SCSI scanners are configured with a line "scsi EPSON" in this file. In some cases it may be necessary to only use the string "scsi" (e.g. for the GT-6500). .TP .I PIO \- Parallel Interface The parallel interface can be configured in two ways: An integer value starting at the beginning of a line will be interpreted as the IO address of the parallel -port. To make it clearer that a configured IO address is a parallel port the +port. To make it clearer that a configured IO address is a parallel port the port address can be preceded by the string "PIO". The PIO connection does not use a special device file in the /dev directory. The IO address can be specified in hex mode (prefixed with "0x"). .TP .I USB For USB scanners not automatically detect, their VENDOR and PRODUCT ID can -be specified manually in the config file. +be specified manually in the config file. More information about valid syntax for USB devices can be found in sane\-usb(5). .TP .I Network Network scanners can be auto-discovered if .I autodiscovery -is specified after +is specified after .I -net +net keyword. An IP address to connect to can also be used. .SH FILES .TP @@ -313,20 +313,20 @@ levels reduce verbosity. .TP .B SANE_DEBUG_EPSON2_SCSI If the library was compiled with debug support enabled, this -environment variable controls the SCSI related debug level for this backend. +environment variable controls the SCSI related debug level for this backend. Only a value of 2 is supported. .TP .B SANE_DEBUG_EPSON2_NET If the library was compiled with debug support enabled, this -environment variable controls the network related debug level for this -backend. E.g., a value of 128 requests all debug output to be printed. +environment variable controls the network related debug level for this +backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. .TP .B SANE_EPSON2_CMD_LVL This allows one to override the function or command level that the backend uses to communicate with the scanner. The function level a scanner supports is determined during the initialization of the device. If -the backend does not recognize the function level reported by the +the backend does not recognize the function level reported by the scanner it will default to function level B3. Valid function levels are A1, A2, B1, B2, B3, B4, B5, B6, B7, B8, D1 and F5. Use this feature only if you know what you are doing! @@ -340,16 +340,16 @@ sane\-scsi(5), sane\-usb(5), scanimage(1), xscanimage(1), xsane(1) None :-) At least none are currently known. .SH UNSUPPORTED DEVICES -The backend may be used with Epson scanners that are not yet listed +The backend may be used with Epson scanners that are not yet listed under the list of supported devices. A scanner that is not recognized -may default to the function level B3, which means that not all -functions that the scanner may be capable of are accessible. +may default to the function level B3, which means that not all +functions that the scanner may be capable of are accessible. If the scanner is not even recognized as an Epson scanner this is probably because the device name reported by the scanner is not in the correct format. Please send this information to the backend maintainer (email address is in the AUTHOR section of this man page or in the -AUTHORS file of the SANE distribution). +AUTHORS file of the SANE distribution). .SH AUTHOR diff --git a/doc/sane-epsonds.man b/doc/sane-epsonds.man index 3324804..03bbbd2 100644 --- a/doc/sane-epsonds.man +++ b/doc/sane-epsonds.man @@ -8,15 +8,15 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to Epson ESC/I-2 scanners. .PP -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d epsonds .RE Not all devices support all options. .TP .I Scan Mode -The -.I \-\-mode +The +.I \-\-mode switch selects the basic mode of operation of the scanner. Valid choices are Lineart, Gray and Color. The Lineart mode is black and white only, Gray will produce 256 levels of gray or more depending on the scanner @@ -33,7 +33,7 @@ allow one to select either 8 bits, 12 or 14 bits per color channel. For a color scan this means an effective color depth of 36 or 42 bits over all three channels. The valid choices depend on the scanner model. -The +The .I \-\-resolution switch selects the resolution for a scan. Some EPSON scanners will scan in any resolution between the lowest and highest possible value. The list @@ -41,7 +41,7 @@ reported by the scanner can be displayed using the "\-\-help \-d epson" parameters to scanimage. The geometry options -.I \-l \-t \-x \-y +.I \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters. @@ -60,20 +60,20 @@ The option select the ADF mode (simplex/duplex). .SH CONFIGURATION FILE -The configuration file @CONFIGDIR@/epsonds.conf specifies the device(s) that the +The configuration file @CONFIGDIR@/epsonds.conf specifies the device(s) that the backend will use. Possible connection types are: .TP .I USB For not automatically detected USB scanners, their VENDOR and PRODUCT ID can -be specified manually in the config file. +be specified manually in the config file. More information about valid syntax for USB devices can be found in sane\-usb(5). .TP .I Network (not yet supported) Network scanners can be auto-discovered if .I autodiscovery -is specified after +is specified after .I -net +net keyword. An IP address to connect to can also be used. .SH FILES .TP diff --git a/doc/sane-escl.man b/doc/sane-escl.man new file mode 100644 index 0000000..21a4d6c --- /dev/null +++ b/doc/sane-escl.man @@ -0,0 +1,41 @@ +.TH sane\-escl 5 "14 Dec 2019" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-escl +.SH NAME +sane\-escl \- SANE backend for eSCL scanners +.SH DESCRIPTION +The +.B sane\-escl +library implements a SANE (Scanner Access Now Easy) backend that +provides access to eSCL protocol scanners. + +.PP +The "escl" backend for SANE supports AirScan/eSCL devices that announce +themselves on mDNS as _uscan._utcp or _uscans._utcp. +If the device is available, the "escl" backend recovers these capacities. +The user configures and starts scanning. +A list of devices that use the eSCL protocol can be found at +.IR https://support.apple.com/en-us/HT201311 . +While these devices are expected to work, your mileage may vary. + +.SH FILES +.TP +.I @CONFIGDIR@/escl.conf +The backend configuration file. +.TP +.I @LIBDIR@/libsane\-escl.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-escl.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_ESCL +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller +levels reduce verbosity. +.SH "SEE ALSO" +sane(7), scanimage(1), xscanimage(1), xsane(1) +.SH AUTHORS +Touboul Nathane, Thierry HUCHARD diff --git a/doc/sane-find-scanner.man b/doc/sane-find-scanner.man index da2d377..26c5258 100644 --- a/doc/sane-find-scanner.man +++ b/doc/sane-find-scanner.man @@ -4,12 +4,12 @@ sane\-find\-scanner \- find SCSI and USB scanners and their device files .SH SYNOPSIS .B sane\-find\-scanner -.RB [ \-h | \-? ] +.RB [ \-? | \-h | \-\-help ] .RB [ \-v ] .RB [ \-q ] .RB [ \-p ] .RB [ \-f ] -.RB [ \-F +.RB [ \-F .IR filename ] .RI [ devname ] @@ -19,15 +19,15 @@ is a command-line tool to find SCSI and USB scanners and determine their Unix device files. Its primary aim is to make sure that scanners can be detected by SANE backends. .PP -For +For .B SCSI -scanners, it checks the default generic SCSI device files (e.g., +scanners, it checks the default generic SCSI device files (e.g., .IR /dev/sg0 ) -and +and .IR /dev/scanner . The test is done by sending a SCSI inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send -"processor"). So +"processor"). So .B sane\-find\-scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend. @@ -42,12 +42,12 @@ and are tested. The files are opened and the vendor and device ids are determined, if the operating system supports this feature. Currently USB scanners are only found this way if they are supported by the Linux scanner module or the -FreeBSD or OpenBSD uscanner driver. After that test, +FreeBSD or OpenBSD uscanner driver. After that test, .B sane\-find\-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners, so the heuristics used to distinguish scanners from other USB devices is not -perfect. +perfect. .B sane\-find\-scanner also tries to find out the type of USB chip used in the scanner. If detected, it will be printed after the vendor and product ids. @@ -55,20 +55,20 @@ it will be printed after the vendor and product ids. will even find USB scanners, that are not supported by any SANE backend. .PP .B sane\-find\-scanner -won't find most +won't find most parallel port scanners, or scanners connected to proprietary ports. Some .B parallel port scanners may be detected by -.B sane\-find\-scanner -p. +.B sane\-find\-scanner -p. At the time of writing this will only detect Mustek parallel port scanners. .SH OPTIONS .TP 8 -.B \-h, \-? +.B \-?, \-h, \-\-help Prints a short usage message. .TP 8 .B \-v -Verbose output. If used once, +Verbose output. If used once, .B sane\-find\-scanner shows every device name and the test result. If used twice, SCSI inquiry information and the USB device descriptors are also printed. @@ -81,7 +81,7 @@ Probe parallel port scanners. .TP 8 .B \-f Force opening all explicitly given devices as SCSI and USB devices. That's -useful if +useful if .B sane\-find\-scanner is wrong in determining the device type. .TP 8 @@ -128,7 +128,6 @@ SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX. .SH BUGS -No support for most parallel port scanners yet. +No support for most parallel port scanners yet. .br Detection of USB chipsets is limited to a few chipsets. - diff --git a/doc/sane-fujitsu.man b/doc/sane-fujitsu.man index 6bd5f73..ccc3d89 100644 --- a/doc/sane-fujitsu.man +++ b/doc/sane-fujitsu.man @@ -5,18 +5,18 @@ sane\-fujitsu \- SANE backend for Fujitsu flatbed and ADF scanners .SH DESCRIPTION -The +The .B sane\-fujitsu library implements a SANE (Scanner Access Now Easy) backend which provides access to most Fujitsu flatbed and ADF scanners. -This document describes backend version 133, which shipped with SANE 1.0.26. +This document describes backend version 134, which shipped with SANE 1.0.28. .SH SUPPORTED HARDWARE -This version supports every known model which speaks the Fujitsu SCSI and -SCSI\-over\-USB protocols. Specifically, the SCSI M309x and M409x series, the +This version supports every known model which speaks the Fujitsu SCSI and +SCSI\-over\-USB protocols. Specifically, the SCSI M309x and M409x series, the SCSI fi\-series, most of the USB fi\-series, the USB ScanSnap S5xx/S15xx, and -the USB iX1xx/5xx series scanners are supported. Please see the list at +the USB iX1xx/5xx series scanners are supported. Please see the list at http://www.sane\-project.org/sane\-supported\-devices.html for details. This backend may support other Fujitsu scanners. The best @@ -40,7 +40,7 @@ ScanStation M3093E/DE/EX fi\-4110EOX/2 ScanPartner M3096EX fi\-4010CU SP\-Jr M3097E+/DE S300/S300M SP\-10/10C M3099A/EH/EX S1300/S1100 -SP\-15C/300C fi\-60F +SP\-15C/300C fi\-60F/65F SP\-600C/620C fi\-5015C SP\-2x/3x .fi @@ -51,13 +51,13 @@ SP\-600C/620C fi\-5015C .SH OPTIONS Effort has been made to expose all hardware options, including: .PP -source s +source s .RS Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex". .RE .PP -mode m +mode m .RS Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray", and "Color". @@ -65,13 +65,13 @@ may include "Lineart", "Halftone", "Gray", and "Color". .PP resolution, y\-resolution .RS -Controls scan resolution. Setting \-\-resolution also sets \-\-y\-resolution, +Controls scan resolution. Setting \-\-resolution also sets \-\-y\-resolution, though this behavior is overridden by some frontends. .RE .PP tl\-x, tl\-y, br\-x, br\-y .RS -Sets scan area upper left and lower right coordinates. These are renamed +Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y by some frontends. .RE .PP @@ -89,19 +89,19 @@ group of endorser options. Additionally, several 'software' options are exposed by the backend. These are reimplementations of features provided natively by larger scanners, but running on the host computer. This enables smaller machines to have similar -capabilities. Please note that these features are somewhat simplistic, and -may not perform as well as the native implementations. Note also that these -features all require that the driver cache the entire image in memory. This +capabilities. Please note that these features are somewhat simplistic, and +may not perform as well as the native implementations. Note also that these +features all require that the driver cache the entire image in memory. This will almost certainly result in a reduction of scanning speed. -Use 'scanimage \-\-help' to get a list, but be aware that some options may -be settable only when another option has been set, and that advanced options +Use 'scanimage \-\-help' to get a list, but be aware that some options may +be settable only when another option has been set, and that advanced options may be hidden by some frontend programs. .PP .SH CONFIGURATION FILE The configuration file "fujitsu.conf" is used to tell the backend how to look for scanners, and provide options controlling the operation of the backend. -This file is read each time the frontend asks the backend for a list +This file is read each time the frontend asks the backend for a list of scanners, generally only when the frontend starts. If the configuration file is missing, the backend will be unable to locate any scanners. .PP @@ -109,8 +109,8 @@ Scanners can be specified in the configuration file in 4 ways: .PP "scsi FUJITSU" .RS -Requests backend to search all scsi busses in the system for a device -which reports itself to be a scanner made by 'FUJITSU'. +Requests backend to search all scsi busses in the system for a device +which reports itself to be a scanner made by 'FUJITSU'. .RE .PP "scsi /dev/sg0" (or other scsi device file) @@ -122,7 +122,7 @@ specify one. Probably should not be used with the other "scsi" line above. .PP "usb 0x04c5 0x1042" (or other vendor/product ids) .RS -Requests backend to search all usb busses in the system for a device +Requests backend to search all usb busses in the system for a device which uses that vendor and product id. The device will then be queried to determine if it is a Fujitsu scanner. .RE @@ -134,7 +134,7 @@ untested. .RE .PP The only configuration option supported is "buffer\-size=xxx", allowing you -to set the number of bytes in the data buffer to something other than the +to set the number of bytes in the data buffer to something other than the compiled\-in default, 65536 (64K). Some users report that their scanner will "hang" mid\-page, or fail to transmit the image if the buffer is not large enough. @@ -174,13 +174,13 @@ enables debugging output to stderr. Valid values are: Flatbed units may fail to scan at maximum area, particularly at high resolution. .PP -Any model that does not support VPD during inquiry will not function until +Any model that does not support VPD during inquiry will not function until an override is added to the backend. .PP CCITT Fax compression used by older scanners is not supported. .PP JPEG output is supported by the backend, but not by the SANE protocol, so is -disabled in this release. It can be enabled if you rebuild from source. +disabled in this release. It can be enabled if you rebuild from source. .SH CREDITS m3091 backend: Frederik Ramm <frederik a t remote d o t org> @@ -234,4 +234,3 @@ sane\-epjitsu(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-genesys.man b/doc/sane-genesys.man index cd00cc3..6540754 100644 --- a/doc/sane-genesys.man +++ b/doc/sane-genesys.man @@ -8,14 +8,14 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on the Genesys GL646, GL841, GL843, GL847 and GL124 chips. At present, the following scanners are known to work with this backend: -.PP +.PP .RS Canon LiDE 35/40/50/60/100/110/120/200/210/220/700 .br Hewlett-Packard HP2300C/HP2400/HP3670/HP3690/G4010/G4050 .br Medion MD5345/MD6228/MD6274 -.br +.br Panasonic KV-SS080 .br Plustek OpticBook 3600 @@ -29,11 +29,11 @@ Visioneer OneTouch 7100/Strobe XP100 (rev3)/XP200/XP300/Roadwarrior Xerox Travel Scanner 100, OneTouch 2400 .RE -.PP +.PP This is stable software for supported models. But if you test new or untested scanners, keep your hand at the scanner's plug and unplug it, if the head bumps at the end of the scan area. -.PP +.PP If you own a scanner other than the ones listed above that works with this backend, please let me know this by sending the scanner's exact model name and the USB vendor and device ids (e.g. from @@ -41,10 +41,10 @@ the USB vendor and device ids (e.g. from .I sane\-find\-scanner or syslog) to the sane\-devel mailing list. Even if the scanner's name is only slightly different from the models mentioned above, please let me know. -.PP +.PP If you own a scanner that isn't detected by the genesys backend but has a GL646, -GL841, GL843, GL847 or GL124 chipset, you can try to add it to the backend. -.PP +GL841, GL843, GL847 or GL124 chipset, you can try to add it to the backend. +.PP .SH "CALIBRATION" To give correct image quality, sheet fed scanners need to be calibrated using the calibration sheet sold with the scanner. To do calibration, you must insert this target @@ -135,26 +135,26 @@ userwith the calibration clear option. A value of 0 means cache is disabled. Additionally, several 'software' options are exposed by the backend. These are reimplementations of features provided natively by larger scanners, but running on the host computer. This enables smaller machines to have similar -capabilities. Please note that these features are somewhat simplistic, and -may not perform as well as the native implementations. Note also that these -features all require that the driver cache the entire image in memory. This +capabilities. Please note that these features are somewhat simplistic, and +may not perform as well as the native implementations. Note also that these +features all require that the driver cache the entire image in memory. This will almost certainly result in a reduction of scanning speed. .PP -.B \-\-swcrop +.B \-\-swcrop .RS - Requests the driver to detect the extremities of the paper within the larger -image, and crop the empty edges. + Requests the driver to detect the extremities of the paper within the larger +image, and crop the empty edges. .RE .PP -.B \-\-swdeskew +.B \-\-swdeskew .RS - Requests the driver to detect the rotation of the paper within the larger + Requests the driver to detect the rotation of the paper within the larger image, and counter the rotation. .RE .PP .B \-\-swdespeck \-\-despeck X .RS - Requests the driver to find and remove dots of X diameter or smaller from the + Requests the driver to find and remove dots of X diameter or smaller from the image, and fill the space with the average surrounding color. .RE .PP @@ -187,24 +187,24 @@ autodetected by statements which are already included into .IR genesys.conf . "vendor_id" and "product_id" are hexadecimal numbers that identify the -scanner. -.PP +scanner. +.PP .SH "FILES" -.TP +.TP .I @CONFIGDIR@/genesys.conf The backend configuration file (see also description of .B SANE_CONFIG_DIR below). -.TP +.TP .I @LIBDIR@/libsane\-genesys.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-genesys.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are @@ -218,7 +218,7 @@ directories. For example, setting .B SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "@CONFIGDIR@" being searched (in this order). -.TP +.TP .B SANE_DEBUG_GENESYS If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels @@ -229,29 +229,29 @@ care. This will print messages related to core genesys functions. .B SANE_DEBUG_GENESYS_LOW This environment variable controls the debug level for low level functions common to all genesys ASICs. -.TP +.TP .B SANE_DEBUG_GENESYS_GL646 This environment variable controls the debug level for the specific GL646 code part. -.TP +.TP .B SANE_DEBUG_GENESYS_GL841 This environment variable controls the debug level for the specific GL841 code part. -.TP +.TP .B SANE_DEBUG_GENESYS_GL843 This environment variable controls the debug level for the specific GL843 code part. -.TP +.TP .B SANE_DEBUG_GENESYS_GL847 This environment variable controls the debug level for the specific GL847 code part. -.TP +.TP .B SANE_DEBUG_GENESYS_GL124 This environment variable controls the debug level for the specific GL124 code part. -Example (full and highly verbose output for gl646): +Example (full and highly verbose output for gl646): .br export SANE_DEBUG_GENESYS=255 .br @@ -260,12 +260,12 @@ export SANE_DEBUG_GENESYS_LOW=255 export SANE_DEBUG_GENESYS_GL646=255 .SH CREDITS - + Jack McGill for donating several sheetfed and flatbed scanners, which made possible to add support for them in the genesys backend: .RS Hewlett-Packard HP3670 -.br +.br Visioneer Strobe XP100 (rev3)/XP200/XP300/Roadwarrior .br Canon LiDE 200 @@ -292,20 +292,20 @@ Luc Verhaegen for donating a Canoscan LiDE 120. .SH "SEE ALSO" .BR sane (7), .BR sane\-usb (5) -.br +.br .SH "AUTHOR" Oliver Rauch -.br +.br Henning Meier-Geinitz <henning@meier\-geinitz.de> -.br +.br Gerhard Jaeger <gerhard@gjaeger.de> -.br +.br St\['e]phane Voltz <stef.dev@free.fr> -.br +.br Philipp Schmid <philipp8288@web.de> -.br +.br Pierre Willenbrock <pierre@pirsoft.dnsalias.org> .br Alexey Osipov <simba@lerlan.ru> for HP2400 final support @@ -321,4 +321,4 @@ This backend will be much slower if not using libusb\-1.0. So be sure that sane\ .SH "BUGS" For the LiDE 200, the scanned data at 4800 dpi is obtained "as is" from sensor. It seems the windows driver does some digital processing to improve it, which is not implemented in the backend. -.PP +.PP diff --git a/doc/sane-gphoto2.man b/doc/sane-gphoto2.man index ef8141f..3e2a046 100644 --- a/doc/sane-gphoto2.man +++ b/doc/sane-gphoto2.man @@ -6,7 +6,7 @@ sane\-gphoto2 \- SANE backend for gphoto2 supported cameras The .B sane\-gphoto2 library implements a SANE (Scanner Access Now Easy) backend that -provides access to the digital cameras supported by gphoto2. +provides access to the digital cameras supported by gphoto2. This backend has only been tested with a handful of cameras so far. Patches to support other models are welcome. .PP @@ -26,16 +26,16 @@ required since they are needed by the sane frontends, but can't be obtained through the gphoto2 interface. Valid ports and cameras can be obtained by "gphoto2 \-\-list\-cameras" and "gphoto2 \-\-list\-ports". .PP -The dumpinquiry line causes some information about the camera to +The dumpinquiry line causes some information about the camera to be printed. .PP Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below: .PP -The "topfolder" line specifies the "fixed" part of the file path. For -example, on the Kodak DC-240, files are stored in the directory +The "topfolder" line specifies the "fixed" part of the file path. For +example, on the Kodak DC-240, files are stored in the directory /DCIM/100DC240. The /DCIM portion is constant, but 100DC240 will -change and must be read from the camera. In this case, the +change and must be read from the camera. In this case, the line would read "topfolder=/DCIM" .PP Some cameras don't implement a file structure and store all pictures @@ -90,12 +90,12 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .TP .B SANE_DEBUG_GPHOTO2 If the library was compiled with debugging support enabled, this -environment variable controls the debug level for this backend. +environment variable controls the debug level for this backend. A value of 128 requests maximally copious debug output; smaller levels reduce verbosity. -.TP +.TP .B GP_DEBUG -Set to 1, 2, or 3, to enable various levels of debugging within the +Set to 1, 2, or 3, to enable various levels of debugging within the gphoto2 libraries. .SH "SEE ALSO" @@ -111,8 +111,7 @@ The manpage was largely copied from the dc210 manpage. Many, no doubt. .PP More general comments, suggestions, and inquiries about frontends -or SANE should go to the SANE Developers mailing list -(see http://www.sane\-project.org/mailing\-lists.html for details). +or SANE should go to the SANE Developers mailing list +(see http://www.sane\-project.org/mailing\-lists.html for details). You must be subscribed to the list, otherwise your mail won't be sent to the subscribers. - diff --git a/doc/sane-gt68xx.man b/doc/sane-gt68xx.man index e3d29af..2e6d3c5 100644 --- a/doc/sane-gt68xx.man +++ b/doc/sane-gt68xx.man @@ -8,7 +8,7 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on the Grandtech GT-6801 and GT-6816 chips. A list of supported scanners can be found on the gt68xx backend -homepage: +homepage: .IR http://www.meier\-geinitz.de/sane/gt68xx\-backend/ . .PP This is BETA software. Especially if you test new or untested scanners, keep @@ -24,7 +24,7 @@ the models already listed as supported, please let me know. .PP If you own a scanner that isn't detected by the gt68xx backend but has a GT-6801 or GT-6816 chipset, you can try to add it to the backend. Have a look at the -following web page: +following web page: .I http://www.meier\-geinitz.de/sane/gt68xx\-backend/adding.html .PP .SH LIBUSB ISSUES @@ -38,7 +38,7 @@ USB information looks at .SH FIRMWARE FILE You need a firmware file for your scanner. That's a small file containing software that will be uploaded to the scanner's memory. It's usually named -*.usb, e.g. +*.usb, e.g. .IR PS1fw.usb . It comes on the installation CD that was provided by the manufacturer, but it may be packaged together with the installation program in an .exe file. For @@ -64,9 +64,9 @@ autodetected by statements which are already included into .IR gt68xx.conf . "vendor_id" and "product_id" are hexadecimal numbers that identify the -scanner. +scanner. .PP -The +The .BR override , .BR firmware , .BR vendor , @@ -82,7 +82,7 @@ Option is used to override the default model parameters. That's necessary for some scanners that use the same vendor/product ids but are different. For these scanners there are already commented out override lines in the configuration -file. +file. .B override "mustek\-scanexpress\-1200\-ub\-plus" is necessary for the Mustek Scanexpress 1200 UB Plus, the Medion/Lifetec/Tevion LT 9452, and the Trust Compact Scan USB 19200. @@ -93,7 +93,7 @@ Medion/ Lifetec/ Tevion/ Cytron MD/LT 9385, the Medion/ Lifetec/ Tevion MD .B override "mustek\-bearpaw\-2400\-cu" is necessary for the Mustek BearPaw 2400 CU and the Fujitsu 1200CUS. The .B override -option must be the first one after the +option must be the first one after the .B usb line. .PP @@ -107,7 +107,7 @@ at a different path, use a .B firmware line. .PP -The +The .B vendor and .B model @@ -178,7 +178,7 @@ increase the verbosity of the output. If the debug level is set to 1 or higher, some debug options become available that are normally hidden. Handle them with care. -Example: +Example: export SANE_DEBUG_GT68XX=4 .SH "SEE ALSO" @@ -214,5 +214,5 @@ Support for buttons is missing. More detailed bug information is available at the gt68xx backend homepage .IR http://www.meier\-geinitz.de/sane/gt68xx\-backend/ . Please contact us if you find a bug or missing feature: -<sane\-devel@lists.alioth.debian.org>. Please send a debug log if your scanner isn't +<sane\-devel@alioth-lists.debian.net>. Please send a debug log if your scanner isn't detected correctly (see SANE_DEBUG_GT68XX above). diff --git a/doc/sane-hp.man b/doc/sane-hp.man index 4e7d35d..1aeaea8 100644 --- a/doc/sane-hp.man +++ b/doc/sane-hp.man @@ -39,7 +39,7 @@ PhotoSmart C5100A R029,R030,R032 SCSI .RE .PP Support for models 5100C/5200C connected to the parallel port requires -the ppSCSI driver available at +the ppSCSI driver available at .I http://cyberelk.net/tim/parport/ppscsi.html and .IR http://penguin-breeder.org/kernel/download/ . @@ -52,7 +52,7 @@ for more details. .PP The "hp" backend no longer supports OfficeJet multi-function peripherals. For these devices use the external "hpoj" backend in version 0.90 and later of -the "HP OfficeJet Linux driver", available at +the "HP OfficeJet Linux driver", available at .br .IR http://hpoj.sourceforge.net . @@ -66,7 +66,7 @@ by another one. See You can also watch the sane\-devel mailing list at .IR http://www.sane\-project.org/mailing\-lists.html . .PP -More details about the hp backend can be found on its homepage +More details about the hp backend can be found on its homepage .IR http://www.kirchgessner.net/sane.html . .PP .SH "DEVICE NAMES" @@ -104,7 +104,7 @@ and .BR sane\-usb (5) on details of what constitutes a valid device name. .PP -Options specified in front of the first line that contains a device name +Options specified in front of the first line that contains a device name are defaults for all devices. Options specified below a line that contains a device name apply just to the most recently mentioned device. .PP @@ -203,7 +203,7 @@ levels reduce verbosity. .TP .B SANE_HOME_HP Only used for OS/2 and along with use of HP PhotoSmart PhotoScanner. -Must be set to the directory where the directory .sane is located. +Must be set to the directory where the directory .sane is located. Is used to save and read the calibration file. .TP .B SANE_HP_KEEPOPEN_SCSI @@ -237,7 +237,7 @@ and 24 bit color. .B Automatic Document Feeder (ADF) For use of the ADF with xscanimage(1), first place paper in the ADF and then change option scan source to 'ADF'. Press 'change document' -to load a sheet. Then press 'scan' to start a scan. +to load a sheet. Then press 'scan' to start a scan. Maybe it is sufficient to press 'scan' without 'change document' for repeated scans. The use of the preview window is not recommended when working with the ADF. diff --git a/doc/sane-hp3500.man b/doc/sane-hp3500.man index 2785b0e..5192983 100644 --- a/doc/sane-hp3500.man +++ b/doc/sane-hp3500.man @@ -37,9 +37,9 @@ support dynamic loading). .B SANE_DEBUG_HP3500 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_HP3500=4 .SH "SEE ALSO" @@ -50,4 +50,3 @@ export SANE_DEBUG_HP3500=4 .SH AUTHOR Troy Rollo <sane@troy.rollo.name> - diff --git a/doc/sane-hp3900.man b/doc/sane-hp3900.man index ab0a100..b623ee5 100644 --- a/doc/sane-hp3900.man +++ b/doc/sane-hp3900.man @@ -26,7 +26,7 @@ BenQ 5550 RTS8823L-01E * .ft R .RE .PP -More details can be found on the hp3900 backend homepage +More details can be found on the hp3900 backend homepage .IR http://sourceforge.net/projects/hp3900\-series/ . .PP This is ALPHA software. Keep your hand at the scanner's plug and unplug it, if @@ -88,9 +88,9 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_HP3900 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_HP3900=4 .SH "SEE ALSO" @@ -107,4 +107,3 @@ Jonathan Bravo Lopez <jkdsoft@gmail.com> Scanning is only tested with Linux/ix86/gcc. Be careful when testing on other operating systems and especially on big-endian platforms. The scanner may get wrong data. - diff --git a/doc/sane-hp4200.man b/doc/sane-hp4200.man index e392d85..cbb8c5e 100644 --- a/doc/sane-hp4200.man +++ b/doc/sane-hp4200.man @@ -16,11 +16,11 @@ ScanJet 4200 Cxi ScanJet 4200 Cse .RE .PP -More details can be found on the hp4200 backend homepage +More details can be found on the hp4200 backend homepage .IR http://hp4200\-backend.sourceforge.net/ . .PP This is BETA software. Keep your hand at the scanner's plug and unplug it, if -the head bumps at the end of the scan area. +the head bumps at the end of the scan area. .PP If you own a scanner other than the ones listed above that works with this backend, please let us know this by sending the scanner's exact model name and @@ -79,9 +79,9 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_HP4200 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_HP4200=4 .SH "SEE ALSO" @@ -102,4 +102,4 @@ Only 8 bit color mode works. Scanning is slow due to backtracking. .PP Send bug reports to the sane\-devel mailing list: -sane\-devel@lists.alioth.debian.org. +sane\-devel@alioth-lists.debian.net. diff --git a/doc/sane-hp5400.man b/doc/sane-hp5400.man index d789215..23c40d8 100644 --- a/doc/sane-hp5400.man +++ b/doc/sane-hp5400.man @@ -16,7 +16,7 @@ ScanJet 5470C ScanJet 5490C .RE .PP -More details can be found on the hp5400 backend homepage +More details can be found on the hp5400 backend homepage .IR http://hp5400backend.sourceforge.net/ . .PP This is ALPHA software. Keep your hand at the scanner's plug and unplug it, if @@ -79,9 +79,9 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_HP5400 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_HP5400=4 .SH "SEE ALSO" @@ -99,4 +99,3 @@ Martijn van Oosterhout <kleptog@svana.org>, Thomas Soumarmon Scanning is only tested with Linux/ix86/gcc. Be careful when testing on other operating systems and especially on big-endian platforms. The scanner may get wrong data. - diff --git a/doc/sane-hp5590.man b/doc/sane-hp5590.man index 2ccfcc5..5330800 100644 --- a/doc/sane-hp5590.man +++ b/doc/sane-hp5590.man @@ -1,69 +1,320 @@ -.TH sane\-hp5590 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" -.IX sane\-hp5590 +.\" Automatically generated by Pandoc 2.7.2 +.\" +.TH "sane-hp5590" "5" "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.hy .SH NAME -sane\-hp5590 \- SANE backend for -Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners +.PP +sane-hp5590 - SANE backend for Hewlett-Packard +4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners .SH DESCRIPTION -The -.B sane\-hp5590 -library implements a SANE (Scanner Access Now Easy) backend that provides -access to the following Hewlett-Packard Workgroup/Document scanners: .PP -.RS +The \f[B]sane-hp5590\f[R] library implements a SANE (Scanner Access Now +Easy) backend that provides access to the following Hewlett-Packard +Workgroup/Document scanners: +.IP \[bu] 2 ScanJet 4500C -.br +.IP \[bu] 2 ScanJet 4570C -.br +.IP \[bu] 2 ScanJet 5500C -.br +.IP \[bu] 2 ScanJet 5550C -.br +.IP \[bu] 2 ScanJet 5590 -.br +.IP \[bu] 2 ScanJet 7650 +.PP +If you own a scanner other than the ones listed above that works with +this backend, please let us know this by sending the scanner\[cq]s exact +model name and the USB vendor and device ids (e.g.\ from +\f[I]/sys/bus/usb/devices\f[R], \f[I]sane-find-scanner\f[R] or syslog) +to us. +Even if the scanner\[cq]s name is only slightly different from the +models mentioned above, please let us know. +.SH OPTIONS +.PP +The options the backend supports can either be selected through command +line options to programs like scanimage or through GUI elements in +\f[I]xscanimage\f[R] or \f[I]xsane\f[R]. +Valid command line options and their syntax can be listed by using: +.IP +.nf +\f[C] +scanimage --help -d hp5590:interface:device +\f[R] +.fi +.PP +where \f[I]interface\f[R] and \f[I]device\f[R] specify the device in +question, as in the configuration file. +Add \f[I]--all-options\f[R] to also list the hardware read-out options. +The -d parameter and its argument can be omitted to obtain information +on the first scanner identified. +.PP +Use the command: +.IP +.nf +\f[C] +scanimage -L +\f[R] +.fi +.PP +to list all devices recognized by your SANE installation. +.SH DEVICE SPECIFIC OPTIONS +.TP +.B -l \f[I]n\f[R] +Top-left X position of scan area in \f[B]mm\f[R]. +Allowed range: 0 .. +215.889. +.TP +.B -t \f[I]n\f[R] +Top-left Y position of scan area in \f[B]mm\f[R]. +Allowed range: 0 .. +297.699. +.TP +.B -x \f[I]n\f[R] +X width of scan-area in \f[B]mm\f[R]. +Allowed range: 0 .. +215.889. +.TP +.B -y \f[I]n\f[R] +Y height of scan-area in \f[B]mm\f[R]. +Allowed range: 0 .. +297.699. +.PP +By default, the maximum size will be scanned. +.TP +.B --mode \f[I]mode\f[R] +Select color mode. +\f[I]mode\f[R] must be one of: \[lq]Color\[rq], \[lq]Color (48 +bits)\[rq], \[lq]Gray\[rq], \[lq]Lineart\[rq]. +.RS +.IP \[bu] 2 +\[lq]Color\[rq] - Scanning is done with 3 * 8 bit RGB color values per +pixel. +.IP \[bu] 2 +\[lq]Color (48 bits)\[rq] - Scanning is done with 3 * 16 bit RGB color +values per pixel. +.IP \[bu] 2 +\[lq]Gray\[rq] - Scanning is done with 1 * 8 bit gray value per pixel. +.IP \[bu] 2 +\[lq]Lineart\[rq] - Scanning is done with 1 bit black and white value +per pixel. +.RE +.TP +.B --source \f[I]source\f[R] +Select the source for scanning. +\f[I]source\f[R] must be one of: \[lq]Flatbed\[rq], \[lq]ADF\[rq], +\[lq]ADF Duplex\[rq], \[lq]TMA Slides\[rq], \[lq]TMA Negatives\[rq]. +.RS +.IP \[bu] 2 +\[lq]Flatbed\[rq] - Scan document on the flat document glass. +.IP \[bu] 2 +\[lq]ADF\[rq] - Scan frontsides of documents with automatic document +feeder. +.IP \[bu] 2 +\[lq]ADF Duplex\[rq] - Scan front- and backsides of documents with +automatic document feeder. +Note, the backside images must be rotated in a separate post process +step. +.IP \[bu] 2 +\[lq]TMA Slides\[rq] - Slide scanning with transparent media adapter. +(Not fully supported by hp5590 backend). +.IP \[bu] 2 +\[lq]TMA Negatives\[rq] - Negative film scanning with transparent media +adapter. +(Not fully supported by hp5590 backend). +.RE +.TP +.B --resolution \f[I]res\f[R] +Set the resolution of the scanned image in \f[B]dpi\f[R]. +\f[I]res\f[R] must be one of: 100, 200, 300, 600, 1200, 2400. +.PP +Default settings: Lineart, Flatbed, 100dpi. +.TP +.B --extend-lamp-timeout[=yes|no] +Extend lamp timeout period. +no = 15 minutes, yes = 1 hour. +(Default: no) +.TP +.B --wait-for-button[=yes|no] +Wait for button press before scanning starts. +(Default: no) +.TP +.B --preview[=yes|no] +Request a preview-quality scan. +(Default: no) +.TP +.B --hide-eop-pixel[=yes|no] +Hide end-of-page indicator pixels and overwrite with color of next +neighbor pixels. +(Default: yes) +.PD 0 +.P +.PD +The scanner uses the last pixel in every scan line for storing the +end-of-page status. +This is needed to detect the end of the document sheet when the +automatic document feeder (ADF) is used. +Unfortunately the end-of-page pixels are also generated in flatbed +scans. +It is recommended to hide these pixels. +.TP +.B --trailing-lines-mode \f[I]mode\f[R] +Filling mode of trailing lines after end of page when automatic document +feeder (ADF) is used. +\f[I]mode\f[R] must be one of: \[lq]last\[rq], \[lq]raw\[rq], +\[lq]raster\[rq], \[lq]white\[rq], \[lq]black\[rq], \[lq]color\[rq]. +(Default: \[lq]last\[rq]) +.RS +.IP \[bu] 2 +\[lq]last\[rq] = repeat the last scan line (recommended), +.IP \[bu] 2 +\[lq]raw\[rq] = read raw scan data (not recommended), +.IP \[bu] 2 +\[lq]raster\[rq] = generate black and white pixel pattern, +.IP \[bu] 2 +\[lq]white\[rq] = white pixels, +.IP \[bu] 2 +\[lq]black\[rq] = black pixels, +.IP \[bu] 2 +\[lq]color\[rq] = RGB or gray colored pixels (see next option). .RE +.TP +.B --trailing-lines-color \f[I]n\f[R] +Set color value for filling trailing scan lines in trailing lines mode +\[lq]color\[rq] (see previous option). +(Default color: violet) +.PD 0 +.P +.PD +The RGB color value must be specified and calculated as 65536 * r + 256 +* g + b, with r, g, b being values in the range of 0 .. +255. +.SH READ OUT OPTIONS .PP -If you own a scanner other than the ones listed above that works with this -backend, please let us know this by sending the scanner's exact model name and -the USB vendor and device ids (e.g. from -.IR /proc/bus/usb/devices , -.I sane\-find\-scanner -or syslog) to us. Even if the scanner's name is only slightly different from -the models mentioned above, please let us know. -.SH CONFIGURATION -None required. +The following options allow reading out the button state, counter value, +color setting, and the state of document in ADF. +This can be used to programmatically control corresponding scanner +options like switching between \f[I]flatbed\f[R] and \f[I]ADF\f[R] mode, +or triggering prost processing tasks after scanning. +.TP +.B --button-pressed +Get the id of the last button pressed. +Id is one of \[lq]none\[rq], \[lq]power\[rq], \[lq]scan\[rq], +\[lq]collect\[rq], \[lq]file\[rq], \[lq]email\[rq], \[lq]copy\[rq], +\[lq]up\[rq], \[lq]down\[rq], \[lq]mode\[rq], \[lq]cancel\[rq]. +.PD 0 +.P +.PD +The scanner stores the id of the last button pressed until it is read. +After read out, the state is reset and subsequent readings will return +\[lq]none\[rq]. +.TP +.B --color-led +Get the state of the color LED indicators. +The state is either \[lq]color\[rq] or \[lq]black_white\[rq]. +.TP +.B --counter-value +Get the counter value as shown on LCD. +The value is in the range of 1 .. +99. +.TP +.B --doc-in-adf +Get the state of the document-available indicator of the automatic +document feeder (ADF). +The state is either \[lq]yes\[rq] or \[lq]no\[rq]. +.SH HINTS FOR USERS OF SCANBD +.PP +\f[I]Scanbd\f[R] is a scanner button daemon, which can read scanner +buttons and trigger scan actions. +.PP +Do not use the old \f[I]scanbuttond\f[R] interface with hp5590. +It is outdated and shall not be used any more. +Scanbd\[cq]s regular interface is fully supported by the current version +of the \f[I]hp5590\f[R] backend. +.PP +This example shows a minimum configuration file and the corresponding +script file for scanbd to be included in \f[I]scanbd.conf\f[R]. +.IP \[bu] 2 +\f[B]hp5590.conf\f[R] +.IP +.nf +\f[C] +device hp5590 { + # Device matching + filter = \[dq]\[ha]hp5590.*\[dq] + desc = \[dq]HP5590 Scanner Family\[dq] + + # Read out counter value and store in environment variable. + function function_lcd_counter { + filter = \[dq]\[ha]counter-value.*\[dq] + desc = \[dq]hp5590: LCD counter\[dq] + env = \[dq]SCANBD_FUNCTION_LCD_COUNTER\[dq] + } + + # Run scan script when button is pressed. + action do-scan { + filter = \[dq]\[ha]button-pressed.*\[dq] + desc = \[dq]hp5590: Scan button pressed\[dq] + script = \[dq]scan_action.script\[dq] + string-trigger { + from-value = \[dq]none\[dq] + to-value = \[dq]scan\[dq] + } + } +} +\f[R] +.fi +.IP \[bu] 2 +\f[B]scan_action.script\f[R] +.IP +.nf +\f[C] +#!/bin/bash +echo device = $SCANBD_DEVICE +echo action = $SCANBD_ACTION +echo counter = $SCANBD_FUNCTION_LCD_COUNTER +scanfile=\[dq]$HOME/tmp/scans/scan-$(date +%s).pnm\[dq] +case $SCANBD_ACTION in +do-scan) + scanimage -d \[dq]$SCANBD_DEVICE\[dq] > \[dq]$scanfile\[dq] + ;; +*) + echo Warning: Unknown scanbd action: \[dq]$SCANBD_ACTION\[dq] + ;; +esac +\f[R] +.fi .SH FILES .TP -.I @LIBDIR@/libsane\-hp5590.a +.B \f[I]\[at]LIBDIR\[at]/libsane-hp5590.a\f[R] The static library implementing this backend. .TP -.I @LIBDIR@/libsane\-hp5590.so +.B \f[I]\[at]LIBDIR\[at]/libsane-hp5590.so\f[R] The shared library implementing this backend (present on systems that support dynamic loading). .SH ENVIRONMENT +.PP +If the library was compiled with debug support enabled, this environment +variable controls the debug level for this backend. +.PP +\f[B]SANE_DEBUG_HP5590\f[R] +.PP +Higher debug levels increase the verbosity of the output: +.IP +.nf +\f[C] +10 - generic processing +20 - verbose backend messages +40 - HP5590 high-level commands +50 - HP5590 low-level (USB-in-USB) commands +\f[R] +.fi .TP -.B SANE_DEBUG_HP5590 -If the library was compiled with debug support enabled, this -environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. See used levels below. -.P -.RS -Level 10 - generic processing -.br -Level 20 - verbose backend messages -.br -Level 40 - HP5590 high-level commands -.br -Level 50 - HP5590 low-level (USB-in-USB) commands - -.P -Example: - +.B Example: export SANE_DEBUG_HP5590=50 - -.SH "SEE ALSO" -.BR sane (7), -.BR sane\-usb (5), - -.SH AUTHOR -Ilia Sotnikov <hostcc@gmail.com> +.SH SEE ALSO +.PP +\f[B]sane\f[R](7), \f[B]sane-usb\f[R](5) +.SH AUTHORS +Ilia Sotnikov <hostcc@gmail.com>. diff --git a/doc/sane-hs2p.man b/doc/sane-hs2p.man index b0df57d..9757eff 100644 --- a/doc/sane-hs2p.man +++ b/doc/sane-hs2p.man @@ -25,12 +25,12 @@ Where .I special is either the path-name for the special device that corresponds to a SCSI scanner. The program -.I sane\-find\-scanner +.I sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sg0 or .IR /dev/sga , -for example. See +for example. See .BR sane\-scsi (5) for details. @@ -39,7 +39,7 @@ The contents of the .I hs2p.conf file is a list of device names that correspond to SCSI scanners. Empty lines and lines starting with a hash mark (#) are -ignored. See +ignored. See .BR sane\-scsi (5) on details of what constitutes a valid device name. @@ -84,29 +84,29 @@ from the flatbed or ADF (either simplex or duplex) is supported. Lineart, halftone, 4-bit gray, and 8-bit gray are supported. Pre-set gamma tables and halftone patterns are supported, as well as brightness, threshold, contrast. Also supported is scan wait mode, binary and gray filtering, negative scanning, -and absolute or relative white setting. Printing with the optional endorser +and absolute or relative white setting. Printing with the optional endorser also is supported. .SH PLANNED FUNCTIONALITY -This scanner can scan from the ADF in continuous simplex mode. +This scanner can scan from the ADF in continuous simplex mode. Surprisingly, many scanners scan an entire document from the ADF into memory before ejecting the sheet. Thus if the document is too -long, the scanner cannot hold the entire image data in memory. -But if the scanner would send its image data when its memory got full, -and then read the next buffer's worth of data, continuous scanning -could be achieved. +long, the scanner cannot hold the entire image data in memory. +But if the scanner would send its image data when its memory got full, +and then read the next buffer's worth of data, continuous scanning +could be achieved. .SH MISSING FUNCTIONALITY The SCSI commands for uploading (2AH) or downloading (28H) -custom halftone patterns (02H) and gamma vectors (03H) should work, -but require implementing the SANE Option-Value code to allow the -user to create the tables to be uploaded to the scanner. No support -for Maintenance Data (80H) is planned as this functionality is more -suited to a stand-alone utility to be used by a technician when -replacing the lamp or ADF unit. Nor is support for reading or changing +custom halftone patterns (02H) and gamma vectors (03H) should work, +but require implementing the SANE Option-Value code to allow the +user to create the tables to be uploaded to the scanner. No support +for Maintenance Data (80H) is planned as this functionality is more +suited to a stand-alone utility to be used by a technician when +replacing the lamp or ADF unit. Nor is support for reading or changing IPU (93H) parameters and adjustments planned, since my IS450 lacks -such a unit. The 31-byte Auto Photo/Letter struct and 21-byte Dynamic -threshold struct are documented in the hs2p-scsi.h file should someone +such a unit. The 31-byte Auto Photo/Letter struct and 21-byte Dynamic +threshold struct are documented in the hs2p-scsi.h file should someone wish to use their IPU for image data processing. .SH "SEE ALSO" diff --git a/doc/sane-ibm.man b/doc/sane-ibm.man index 50138d7..0b5013c 100644 --- a/doc/sane-ibm.man +++ b/doc/sane-ibm.man @@ -25,12 +25,12 @@ Where .I special is either the path-name for the special device that corresponds to a SCSI scanner. The program -.I sane\-find\-scanner +.I sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sg0 or .IR /dev/sga , -for example. See +for example. See .BR sane\-scsi (5) for details. @@ -39,7 +39,7 @@ The contents of the .I ibm.conf file is a list of device names that correspond to SCSI scanners. Empty lines and lines starting with a hash mark (#) are -ignored. See +ignored. See .BR sane\-scsi (5) on details of what constitutes a valid device name. @@ -75,7 +75,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_IBM If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. .SH "SEE ALSO" .BR sane (7), diff --git a/doc/sane-kodak.man b/doc/sane-kodak.man index 2566f3d..61ea88e 100644 --- a/doc/sane-kodak.man +++ b/doc/sane-kodak.man @@ -5,7 +5,7 @@ sane\-kodak \- SANE backend for big Kodak flatbed and ADF scanners .SH DESCRIPTION -The +The .B sane\-kodak library implements a SANE (Scanner Access Now Easy) backend which provides access to large Kodak flatbed and ADF scanners. @@ -13,44 +13,44 @@ provides access to large Kodak flatbed and ADF scanners. This document describes backend version 7, which shipped with SANE 1.0.21. .SH SUPPORTED HARDWARE -This version should support models which speak the Kodak SCSI and Firewire -protocols. The i1860 was used to develop the backend, but other models may -work with only minimal modifications. Please see the list at +This version should support models which speak the Kodak SCSI and Firewire +protocols. The i1860 was used to develop the backend, but other models may +work with only minimal modifications. Please see the list at http://www.sane\-project.org/sane\-supported\-devices.html for an updated list. -If you have a machine not on that list, or reported as 'untested': the best way -to determine level of support is to test the scanner directly, or to collect a -trace of the windows driver in action. Please contact the author for help or +If you have a machine not on that list, or reported as 'untested': the best way +to determine level of support is to test the scanner directly, or to collect a +trace of the windows driver in action. Please contact the author for help or with test results. .SH UNSUPPORTED HARDWARE -Most of the recent Kodak consumer or workgroup level machines are based on -other chipsets and are not supported by this backend. Some of these scanners +Most of the recent Kodak consumer or workgroup level machines are based on +other chipsets and are not supported by this backend. Some of these scanners may be supported by another backend. .SH OPTIONS Effort has been made to expose the basic hardware options, including: .PP -source s +source s .RS Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF Duplex". .RE .PP -mode m +mode m .RS Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray", and "Color". .RE .PP -resolution +resolution .RS Controls scan resolution. Available choices may be limited by mode. .RE .PP tl\-x, tl\-y, br\-x, br\-y .RS -Sets scan area upper left and lower right coordinates. These are renamed +Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y by some frontends. .RE .PP @@ -61,14 +61,14 @@ coordinates when using ADF and to detect double feed errors. .RE .PP Other options will be available based on the capabilities of the scanner. -Use 'scanimage \-\-help' to get a list, but be aware that some options may -be settable only when another option has been set, and that advanced options +Use 'scanimage \-\-help' to get a list, but be aware that some options may +be settable only when another option has been set, and that advanced options may be hidden by some frontend programs. .PP .SH CONFIGURATION FILE The configuration file "kodak.conf" is used to tell the backend how to look for scanners, and provide options controlling the operation of the backend. -This file is read each time the frontend asks the backend for a list +This file is read each time the frontend asks the backend for a list of scanners, generally only when the frontend starts. If the configuration file is missing, the backend will use a set of compiled defaults, which are identical to the default configuration file shipped with SANE. @@ -77,8 +77,8 @@ Scanners can be specified in the configuration file in 2 ways: .PP "scsi KODAK" .RS -Requests backend to search all scsi busses in the system for a device -which reports itself to be a scanner made by 'KODAK'. +Requests backend to search all scsi busses in the system for a device +which reports itself to be a scanner made by 'KODAK'. .RE .PP "scsi /dev/sg0" (or other scsi device file) @@ -89,7 +89,7 @@ specify one. Probably should not be used with the other "scsi" line above. .RE .PP The only configuration option supported is "buffer\-size=xxx", allowing you -to set the number of bytes in the data buffer to something other than the +to set the number of bytes in the data buffer to something other than the compiled\-in default, 32768 (32K). Some users report that their scanner will "hang" mid\-page, or fail to transmit the image if the buffer is not large enough. @@ -124,7 +124,7 @@ enables debugging output to stderr. Valid values are: .RE .SH KNOWN ISSUES -Most hardware options are either not supported or not exposed for control by +Most hardware options are either not supported or not exposed for control by the user, including: multifeed detection, image compression, autocropping, endorser, iThresholding, multi\-stream, etc. .PP @@ -133,7 +133,7 @@ endorser, iThresholding, multi\-stream, etc. The various authors of the sane\-fujitsu backend provided useful code. .br Kodak provided access to hardware, documentation and personnel. - + .SH "SEE ALSO" sane(7), sane\-scsi(5) diff --git a/doc/sane-kodakaio.man b/doc/sane-kodakaio.man index 40310ed..664a418 100644 --- a/doc/sane-kodakaio.man +++ b/doc/sane-kodakaio.man @@ -5,7 +5,7 @@ sane\-kodakaio \- SANE backend for Kodak aio printer / scanners .SH DESCRIPTION -The +The .B sane\-kodakaio library implements a SANE (Scanner Access Now Easy) backend which provides access to Kodak aio printer / scanners, like the ESP and Hero series. @@ -15,24 +15,24 @@ incorporation in sane-backends. .SH SUPPORTED HARDWARE This version should support models of the Kodak ESP and Hero series, and possibly some -Advent AiO scanners. The ESP 5250 and Hero 9.1 were used to develop the backend, +Advent AiO scanners. The ESP 5250 and Hero 9.1 were used to develop the backend, but other models may work. Please see the desc file. -If you have a model not on that list, or reported as 'untested': the best way +If you have a model not on that list, or reported as 'untested': the best way to determine level of support is to test the scanner directly. .SH CONFIGURATION FILE The configuration file "kodakaio.conf" is used to tell the backend how to look for scanners, and provide options controlling the operation of the backend. -This file is read each time the frontend asks the backend for a list +This file is read each time the frontend asks the backend for a list of scanners, generally only when the frontend starts. .SH ENVIRONMENT The backend uses a single environment variable, SANE_DEBUG_KODAKAIO, which -enables debugging output to stderr. +enables debugging output to stderr. .SH KNOWN ISSUES -Most hardware options are either not supported or not exposed for control by +Most hardware options are either not supported or not exposed for control by the user, including: multifeed detection, image compression etc. .PP diff --git a/doc/sane-kvs1025.man b/doc/sane-kvs1025.man index 23dcd50..23a67f3 100644 --- a/doc/sane-kvs1025.man +++ b/doc/sane-kvs1025.man @@ -5,7 +5,7 @@ sane\-kvs1025 \- SANE backend for Panasonic KV-S102xC USB ADF scanners. .SH DESCRIPTION -The +The .B sane\-kvs1025 library implements a SANE (Scanner Access Now Easy) backend which provides access to the Panasonic KV-S1020C/1025C and KV-S1045C scanners. @@ -28,4 +28,3 @@ sane(7), sane\-usb(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-kvs20xx.man b/doc/sane-kvs20xx.man index 8cb8b9c..bd3ecc2 100644 --- a/doc/sane-kvs20xx.man +++ b/doc/sane-kvs20xx.man @@ -5,7 +5,7 @@ sane\-kvs20xx \- SANE backend for Panasonic KV-S20xxC USB/SCSI ADF scanners. .SH DESCRIPTION -The +The .B sane\-kvs20xx library implements a SANE (Scanner Access Now Easy) backend which provides access to the Panasonic KV-S202xC and KV-S204xC scanners. @@ -26,4 +26,3 @@ sane(7), sane\-usb(5), sane\-scsi(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-kvs40xx.man b/doc/sane-kvs40xx.man index f1aecbc..5a53853 100644 --- a/doc/sane-kvs40xx.man +++ b/doc/sane-kvs40xx.man @@ -5,7 +5,7 @@ sane\-kvs40xx \- SANE backend for Panasonic KV-S40xxC USB/SCSI ADF scanners. .SH DESCRIPTION -The +The .B sane\-kvs40xx library implements a SANE (Scanner Access Now Easy) backend which provides access to the Panasonic KV-S40xxC and KV-S70xxC scanners. @@ -28,4 +28,3 @@ sane(7), sane\-usb(5), sane\-scsi(5) .SH AUTHOR m. allan noah: <kitno455 a t gmail d o t com> - diff --git a/doc/sane-leo.man b/doc/sane-leo.man index a346403..f0d9266 100644 --- a/doc/sane-leo.man +++ b/doc/sane-leo.man @@ -32,7 +32,7 @@ elements in xscanimage or xsane. If you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d leo .RE @@ -42,7 +42,7 @@ scanimage \-\-help \-d leo .TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .I Black & White , .I Grayscale @@ -62,7 +62,7 @@ between 1 and 300, in increments of 1. .B Geometry options .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters by default. @@ -76,24 +76,24 @@ area. All parameters are specified in millimeters by default. (grayscale and color mode only) allows the user to specify a gamma table (see the next 3 parameters). -.TP -.B \-\-red\-gamma\-table +.TP +.B \-\-red\-gamma\-table (color mode only) can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. -.TP -.B \-\-green\-gamma\-table +.TP +.B \-\-green\-gamma\-table (color mode only) can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. .TP -.B \-\-blue\-gamma\-table +.B \-\-blue\-gamma\-table (color mode only) can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. .TP .B \-\-halftone -(Black & White only) select the halftone mask to use. Possible values are +(Black & White only) select the halftone mask to use. Possible values are .I Diamond , .I 8x8 Coarse Fatting @@ -104,7 +104,7 @@ for the blue channel. The table must be 256 bytes long. and .I 8x8 Vertical Line -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 28 dpi and the scan area is the maximum allowed. The scan mode is user diff --git a/doc/sane-lexmark.man b/doc/sane-lexmark.man index 30bba87..06e3359 100644 --- a/doc/sane-lexmark.man +++ b/doc/sane-lexmark.man @@ -9,13 +9,13 @@ library implements a SANE (Scanner Access Now Easy) backend that provides access to the scanner part of Lexmark X1100/X1200 AIOs. This backend should be considered .B beta-quality -software! -.PP +software! +.PP The scanners that should work with this backend are: -.PP +.PP .RS .ft CR -.nf +.nf Vendor Model status \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\- Lexmark X74 good @@ -28,7 +28,7 @@ The scanners that should work with this backend are: Lexmark X12xx good in USB1.1, not fully tested in USB2.0 Dell A920 good -.fi +.fi .ft R .RE @@ -36,58 +36,58 @@ The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in xscanimage or xsane. -.br +.br If you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d lexmark:usb:<usb port> .RE -.TP +.TP .B Scan Mode Options -.TP +.TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .IR Color , .I Gray and .I Lineart -The default mode is Color. The Lineart mode is black and white only (1 bit). +The default mode is Color. The Lineart mode is black and white only (1 bit). Grayscale will produce 256 levels of gray (8 bits). Color mode allows for over 16 million different colors produced from 24 bits of color information. -.TP +.TP .B \-\-resolution -selects the resolution for a scan. The horizontal and vertical resolutions are set +selects the resolution for a scan. The horizontal and vertical resolutions are set by the value of this option. The scanner is capable of the following resolutions for the specified option value: -.PP +.PP .RS .ft CR -.nf - Value Hor. Resolution Vert. Resolution +.nf + Value Hor. Resolution Vert. Resolution \-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- 75 75dpi 75dpi - 150 150dpi 150dpi - 300 300dpi 300dpi - 600 600dpi 600dpi + 150 150dpi 150dpi + 300 300dpi 300dpi + 600 600dpi 600dpi 1200 600dpi 1200dpi (only for X11xx models with 'B2' sensor) -.fi +.fi .ft R .RE -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 75 dpi -and the scan area and the scan mode are as specified through their options, +and the scan area and the scan mode are as specified through their options, or the default if not specified. The default value for preview mode is "no". -.TP +.TP .B \-\-threshold selects the minimum-brightness to get a white point. The threshold is only used with Lineart mode scans. -It is specified as a percentage in the range 0..100% (in steps of 1). +It is specified as a percentage in the range 0..100% (in steps of 1). The default value of the threshold option is 50. @@ -96,17 +96,17 @@ The configuration file @CONFIGDIR@/lexmark.conf contains only the usb device id .SH "FILES" -.TP +.TP .I @LIBDIR@/libsane\-lexmark.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-lexmark.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_DEBUG_LEXMARK .B SANE_DEBUG_LEXMARK_LOW If the library was compiled with debug support enabled, this @@ -125,7 +125,7 @@ The data compression isn't supported for the X1200 series on USB 1.1, leading to slow scans. .SH "BUGS" -.br +.br No bugs currently known. @@ -135,16 +135,16 @@ sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7) .SH "AUTHOR" -.TP +.TP The backend was originally written by Fred Odendaal. .I http://ca.geocities.com/freshshelf@rogers.com/ -.TP +.TP The new version is currently developed by St\['e]phane Voltz. .I http://stef.dev.free.fr/sane/lexmark .TP X74 support was written by Torsten Houwaart (<ToHo@gmx.de>) .SH "CREDITS" -.TP +.TP Many thanks go to: Julien Furgerot who lend me a Dell A920. Robert Price, Dani Ele and Dalai Felinto for the time they spent recording diff --git a/doc/sane-ma1509.man b/doc/sane-ma1509.man index bdd20f7..2677fcd 100644 --- a/doc/sane-ma1509.man +++ b/doc/sane-ma1509.man @@ -13,7 +13,7 @@ also work. This backend is ALPHA software. Be careful and remove the power plug immediately if your hear unusual noises. .PP -More details can be found on the ma1509 backend homepage +More details can be found on the ma1509 backend homepage .IR http://www.meier\-geinitz.de/sane/ma1509\-backend/ . .PP Other Mustek USB scanners are supported by the gt68xx, mustek_usb and the @@ -25,7 +25,7 @@ and for details. .PP This backend can only work with scanners that are already detected by the -operating system. See +operating system. See .BR sane\-usb (5) for details. .PP @@ -59,20 +59,20 @@ file is a list of options and device names that correspond to Mustek BearPaw 1200F scanners. Empty lines and lines starting with a hash mark (#) are ignored. .PP -Instead of using the device name, the scanner can be autodetected by +Instead of using the device name, the scanner can be autodetected by .B "usb vendor_id product_id" statements which are already included into .IR ma1509.conf . This is only supported with Linux 2.4.8 and higher and all systems that support libsub. "vendor_id" and "product_id" are hexadecimal numbers that identify the scanner. If this doesn't work, a device name must be placed in -.I ma1509.conf +.I ma1509.conf as described above. .PP To set the time the lamp needs for warm-up, use .B option .B warmup-time -in +in .IR ma1509.conf . The time is given in seconds after the option. The default is 30 seconds. .SH FILES @@ -107,7 +107,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_MA1509 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. .SH "SEE ALSO" .BR sane (7), diff --git a/doc/sane-magicolor.man b/doc/sane-magicolor.man index 1e6c0a5..17ef387 100644 --- a/doc/sane-magicolor.man +++ b/doc/sane-magicolor.man @@ -10,21 +10,21 @@ backend supports KONICA MINOLTA magicolor scanners connected via USB or LAN. Cur The following scanner should work with this backend: Device Details -.br +.br \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- -.br +.br Vendor: KONICA MINOLTA -.br +.br Model: magicolor 1690MF .SH "CONFIGURATION" -.PP +.PP This section describes the backend's configuration file entries. The file is located at: -.IP +.IP .I @CONFIGDIR@/magicolor.conf -.PP +.PP For a proper setup, at least one of the following entries are needed: -.IP +.IP .I net autodiscovery .br .I net [IP ADDRESS] [DEVICE-ID] @@ -34,22 +34,22 @@ For a proper setup, at least one of the following entries are needed: .I usb [VENDOR-ID] [DEVICE-ID] .SH "FILES" -.TP +.TP .I @CONFIGDIR@/magicolor.conf The backend configuration file -.TP +.TP .I @LIBDIR@/libsane\-magicolor.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-magicolor.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi\-colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in @CONFIGDIR@. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting .B SANE_CONFIG_DIR to "/tmp/config:" would result in directories "/tmp/config", ".", and "@CONFIGDIR@" being searched (in this order). -.TP +.TP .B SANE_DEBUG_MAGICOLOR If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. @@ -59,14 +59,14 @@ To obtain debug messages from the backend, set this environment variable before Example: SANE_DEBUG_MAGICOLOR=65 xscanimage .SH "KNOWN BUGS AND RESTRICTIONS" -.PP +.PP Large color scans may sometimes timeout due to unknown reasons (the scanner simply stops returning data) -.PP +.PP Cancelling large scans may lock up the scanner. .SH "SEE ALSO" .BR sane (7), -.br +.br .I http://wiki.kainhofer.com/hardware/magicolor_scan .SH "AUTHOR" -.PP +.PP Reinhold Kainhofer <reinhold@kainhofer.com> diff --git a/doc/sane-matsushita.man b/doc/sane-matsushita.man index 578421a..5bbf734 100644 --- a/doc/sane-matsushita.man +++ b/doc/sane-matsushita.man @@ -31,7 +31,7 @@ backend: Other Panasonic high speed scanners may or may not work with that backend. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d matsushita .RE @@ -57,12 +57,12 @@ selects the number of pages to scan (one or until the tray is empty). .TP .B \-\-paper\-size A4|...|Legal|Letter [A4] -options selects the area to scan. It adjust the +options selects the area to scan. It adjust the .B \-l \-t \-x \-y options accordingly. It does not need to be the real size of the paper. .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters. It is possible to use @@ -87,7 +87,7 @@ automatically sets brightness, contrast, white level, gamma, noise reduction and option sets the tonal gradation for the halftone mode. Pattern downloading is not implemented by the backend. .TP .B \-\-autoseparation -provides automatic separation of text and images. +provides automatic separation of text and images. .TP .B \-\-white\-level option indicate the source of the white base. diff --git a/doc/sane-microtek.man b/doc/sane-microtek.man index 84047dc..d3bf21c 100644 --- a/doc/sane-microtek.man +++ b/doc/sane-microtek.man @@ -46,7 +46,7 @@ port models may work (under Linux), if they use a parport->scsi chip, and if you can find a scsi->parport driver. This is known to be the case for the Color PageWiz. .PP -The driver does +The driver does .B not support the newest Microtek scanners, such as the V330 and V660, which use a new and very different SCSI-II command set. For those, try the alternate @@ -144,7 +144,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .TP .B SANE_DEBUG_MICROTEK If the library was compiled with debugging support enabled, this -environment variable controls the debug level for this backend. +environment variable controls the debug level for this backend. A value of 128 requests maximally copious debug output; smaller levels reduce verbosity. @@ -169,7 +169,7 @@ i.e. don't complain about these --- but if brightness and/or contrast .B do work for you, please tell me. .PP -If your scanner locks up, try setting the +If your scanner locks up, try setting the .I norealcal or .I noprecal @@ -188,7 +188,7 @@ setenv SANE_DEBUG_MICROTEK 128 .RE .PP More general comments, suggestions, and inquiries about frontends -or SANE should go to -.BR sane\-devel@lists.alioth.debian.org , +or SANE should go to +.BR sane\-devel@alioth-lists.debian.net , the SANE Developers mailing list. Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. diff --git a/doc/sane-microtek2.man b/doc/sane-microtek2.man index b0e359b..cc4f6f4 100644 --- a/doc/sane-microtek2.man +++ b/doc/sane-microtek2.man @@ -311,8 +311,3 @@ sane\-scsi(5), sane(7) Bernd Schroeder (not active anymore) .br Karsten Festag karsten.festag@gmx.de - - - - - diff --git a/doc/sane-mustek.man b/doc/sane-mustek.man index 536466f..f06d9c1 100644 --- a/doc/sane-mustek.man +++ b/doc/sane-mustek.man @@ -15,7 +15,7 @@ Paragon MFS-6000CX .br Paragon MFS-12000CX .br -Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP +Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP .br Paragon MFC-800S, 800 II SP .br @@ -37,7 +37,7 @@ Paragon 1200 SP Pro .br Paragon 1200 A3 Pro .br -Paragon 600 II EP +Paragon 600 II EP .br Paragon 600 II N .br @@ -53,7 +53,7 @@ Primax Compact 4800 SCSI .br .RE .PP -More details can be found on the Mustek SCSI backend homepage +More details can be found on the Mustek SCSI backend homepage .IR http://www.meier\-geinitz.de/sane/mustek\-backend/ . .PP Don't mix up MFS (Paragon), Pro and ScanExpress models! They're @@ -92,7 +92,7 @@ If you own a Mustek (or Trust) scanner other than the ones listed above that works with this backend, please let us know by sending the scanner's exact model name (look at the front and back of the scanner) and a debug output to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . You can get the debug output by setting the environment variable .B SANE_DEBUG_MUSTEK to 5 and showing the list of available scanners with scanimage \-L. Please @@ -112,17 +112,17 @@ Where .I special is either the path-name for the special device that corresponds to a SCSI scanner or the port number at which the parallel port scanners can -be found (see section +be found (see section .B "PARALLEL PORT SCANNERS" below). For SCSI scanners, the special device name must be a generic SCSI device or a symlink to such a device. The program -.I sane\-find\-scanner +.I sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sg0 or .IR /dev/sg3 , -for example. See +for example. See .BR sane\-scsi (5) for details. .SH CONFIGURATION @@ -130,7 +130,7 @@ The contents of the .I mustek.conf file is a list of options and device names that correspond to Mustek scanners. Empty lines and lines starting with a hash mark (#) are -ignored. See +ignored. See .BR sane\-scsi (5) on details of what constitutes a valid device name. .PP @@ -279,7 +279,7 @@ for driver- and platform-specific information. The ScanExpress models have sometimes trouble with high resolution color mode. If you encounter sporadic corrupted images (parts duplicated or shifted horizontally) kill all other applications before scanning -and (if sufficient memory is available) disable swapping. +and (if sufficient memory is available) disable swapping. .PP Details on how to get the Mustek SCSI adapters and other cards running can be found at @@ -306,12 +306,12 @@ only one number on a single line. Example: .RE .PP Note that for these scanners usually root privileges are required to access the -I/O ports. Thus, either make frontends such as +I/O ports. Thus, either make frontends such as .BR scanimage (1) -and +and .BR xscanimage (1) setuid root (generally not recommended for safety reasons) or, alternatively, -access this backend through the network daemon +access this backend through the network daemon .BR saned (8). .PP If the Mustek backend blocks while sending the inquiry command to the scanner, @@ -360,7 +360,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_MUSTEK If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. .ft CR .nf @@ -374,15 +374,15 @@ Value Description .fi .ft R -Example: +Example: export SANE_DEBUG_MUSTEK=4 .SH "SEE ALSO" .BR sane (7), .BR sane\-find\-scanner (1), .BR sane\-scsi (5), -.BR sane\-mustek_usb (5), -.BR sane\-gt68xx (5), +.BR sane\-mustek_usb (5), +.BR sane\-gt68xx (5), .BR sane\-plustek (5), .BR sane\-mustek_pp (5) .br @@ -396,7 +396,7 @@ Henning Meier-Geinitz, James Perry (600 II EP). .SH BUGS Scanning with the SCSI adapters supplied by Mustek is very slow at -high resolutions and wide scan areas. +high resolutions and wide scan areas. .PP Some scanners (e.g. Paragon 1200 A3 + Pro, SE A3) need more testing. .PP diff --git a/doc/sane-mustek_pp.man b/doc/sane-mustek_pp.man index 253759d..acc2f9b 100644 --- a/doc/sane-mustek_pp.man +++ b/doc/sane-mustek_pp.man @@ -18,10 +18,10 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to Mustek parallel port flatbed scanners and OEM versions. -There are 2 classes of Mustek parallel port scanners: regular +There are 2 classes of Mustek parallel port scanners: regular .B CCD -(cold cathode device) scanners and -.B CIS +(cold cathode device) scanners and +.B CIS (contact image sensor) scanners. .P The current version of this backend supports both CCD type scanners and @@ -29,7 +29,7 @@ CIS type scanners. .P The following scanners might work with this backend: -.SS "CCD scanners" +.SS "CCD scanners" .EX Model: ASIC ID: CCD Type: works: @@ -56,25 +56,25 @@ Mustek 1200 CP+ 1015 yes .EE .EX -OEM versions Original works +OEM versions Original works -------------------------------------------------- Medion/LifeTec/Tevion MD/LT 9350/9351 1200 CP yes MD/LT 9850/9851 1200 CP maybe (**) MD/LT 9858 1200 CP probably MD/LT 9890/9891 1200 CP yes -Targa +Targa Funline TS12EP 1200 CP yes Funline TS6EP 600 CP yes Trust Easy Connect 9600+ 600 CP yes -Cybercom +Cybercom 9352 1200 CP yes (***) .EE -.HP +.HP (*) Calibration problems existed with earlier version of this driver. They seem to be solved now. -.HP +.HP (**) Problems have been reported in the past for the MD/LT9850 type (striped scans, head moving in wrong direction at some resolutions). It is not known whether @@ -82,7 +82,7 @@ the current version of the driver still has these problems. .PP .B IF YOU HEAR LOUD CLICKING NOISES, IMMEDIATELY UNPLUG THE SCANNER ! (This holds for any type of scanner). -.HP +.HP (***) Possibly, the engine_delay parameter has to be set to 1 ms for accurate engine movements. .PP @@ -90,15 +90,15 @@ Please note that this backend is still under construction. Certain models are currently not supported and some may never be because the communication protocol is still unknown (eg., SE 12000 P). .PP -Some scanners work faster when +Some scanners work faster when .B EPP/ECP is enabled in the BIOS. EPP mode however may lead to hard-locks on some Linux systems. If that is the case for you, you can either disable ECP/EPP in your BIOS or disable it in the backend itself (see GLOBAL OPTIONS). .PP Note that the backend needs to run as root or has to have appropriate access -rights to /dev/parport* if libieee1284 support is compiled in. To allow user -access to the scanner run the backend through the network interface (See +rights to /dev/parport* if libieee1284 support is compiled in. To allow user +access to the scanner run the backend through the network interface (See saned(8) and sane\-net(5)). Note also that the backend .I does not support @@ -112,7 +112,7 @@ to enable the backend explicitly in your dll.conf, just remove the hash mark in the line "mustek_pp". .SH "DEVICE DEFINITION" -This backend allows multiple devices being defined and configured via the +This backend allows multiple devices being defined and configured via the .B mustek_pp.conf file (even simultaneously, provided that they are connected to different parallel ports). Please make sure to edit this file @@ -134,23 +134,23 @@ for instance "LifeTec 9350". .B <port name> is the name of the parallel port to which the device is connected. In case libieee1284 is used for communication with the port -.I (default -.IR setup) , -valid port names are -.BR parport0 , -.BR parport1 , +.I (default +.IR setup) , +valid port names are +.BR parport0 , +.BR parport1 , and .BR parport2 . .PP In case the backend is configured for raw IO -.I (old +.I (old .IR setup) , port addresses have to be used instead of port names: .BR 0x378 , -.BR 0x278 , +.BR 0x278 , or .BR 0x3BC . -The mapping of parallel ports (lp0, lp1, and lp2) to these addresses +The mapping of parallel ports (lp0, lp1, and lp2) to these addresses can be different for different Linux kernel versions. For instance, if you are using a Kernel 2.2.x or better and you have only one parallel port, this port is named lp0 regardless of the base address. However, @@ -159,7 +159,7 @@ port your scanner is connected to, have a look at your /etc/conf.modules, /etc/modules.conf and/or /proc/ioports. .PP If you are unsure which port to use, you can use the magic value -.BR * +.BR * to probe for your scanner. .PP .HP @@ -169,7 +169,7 @@ is the driver to use for this device. Currently available drivers are: .BR cis600 " : for 600 CP, 96 CP & OEM versions" .br .BR cis1200 " : for 1200 CP & OEM versions" -.br +.br .BR cis1200+ " : for 1200 CP+ & OEM versions" .br .BR ccd300 " : for 600 IIIE P & OEM version" @@ -187,12 +187,12 @@ cover only half of the width of the scan area (also not dangerous). .PP If unsure about the exact model of your OEM version, check the optical resolution in the manual or on the box: the 600CP has a maximum optical -resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum -optical resolution of 600x1200 DPI. +resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum +optical resolution of 600x1200 DPI. .PP Examples: .PP -.RS +.RS scanner "LifeTec 9350" 0x378 cis1200 .PP scanner Mustek_600CP 0x378 cis600 @@ -201,7 +201,7 @@ scanner Mustek_600IIIEP * ccd300 .RE If in doubt which port you have to use, or whether your scanner is -detected at all, you can use +detected at all, you can use .B sane\-find\-scanner \-p to probe all configured ports. @@ -209,7 +209,7 @@ to probe all configured ports. .PP The contents of the .B mustek_pp.conf -file is a list of device definitions and device options that correspond to +file is a list of device definitions and device options that correspond to Mustek scanners. Empty lines and lines starting with a hash mark (#) are ignored. Options have the following format: .PP @@ -220,19 +220,19 @@ ignored. Options have the following format: Depending on the nature of the option, a value may or may not be present. Options always apply to the scanner definition that precedes them. There are no global options. Options are also driver-specific: not all drivers -support all possible options. +support all possible options. .SS Common options .TP .B bw <value> Black/white discrimination value to be used during lineart scanning. Pixel values below this value are assumed to be black, values above are -assumed to be white. +assumed to be white. .br Default value: 127 -.br +.br Minimum: 0 -.br +.br Maximum: 255 .sp Example: option bw 150 @@ -240,7 +240,7 @@ Example: option bw 150 .SS CIS driver options .TP .B top_adjust <value> -Vertical adjustment of the origin, expressed in millimeter (floating point). +Vertical adjustment of the origin, expressed in millimeter (floating point). This option can be used to calibrate the position of the origin, within certain limits. Note that CIS scanners are probably temperature sensitive, and that a certain inaccuracy may be hard to avoid. Differences in offset between @@ -261,7 +261,7 @@ scan does not start at the origin, the driver will try to move the scanhead to the start of the scan area at the fastest possible speed. On some models, this may not work, resulting in large inaccuracies (up to centimeters). By setting this option, the driver is forced to use normal speed during -skipping, which can circumvent the accuracy problems. Currently, there are +skipping, which can circumvent the accuracy problems. Currently, there are no models for which these inaccuracy problems are known to occur. .sp By default, fast skipping is used. @@ -454,13 +454,13 @@ For additional information on the CIS driver, see .SH AUTHORS .nf -Jochen Eisinger <jochen at penguin\-breeder dot org> +Jochen Eisinger <jochen at penguin\-breeder dot org> Eddy De Greef <eddy_de_greef at scarlet dot be> .fi .SH BUGS -Too many... please send bug reports to -.I sane\-devel@lists.alioth.debian.org +Too many... please send bug reports to +.I sane\-devel@alioth-lists.debian.net (note that you have to subscribe first to the list before you can send emails... see http://www.sane\-project.org/mailing\-lists.html) diff --git a/doc/sane-mustek_usb.man b/doc/sane-mustek_usb.man index a934e8a..a70ad5e 100644 --- a/doc/sane-mustek_usb.man +++ b/doc/sane-mustek_usb.man @@ -23,11 +23,11 @@ Trust Compact Scan USB 19200 .br .RE .PP -More details can be found on the Mustek USB backend homepage +More details can be found on the Mustek USB backend homepage .IR http://www.meier\-geinitz.de/sane/mustek_usb\-backend/ . .PP The Mustek BearPaw 1200 and 2400 scanners are supported by the plustek -backend. See +backend. See .BR sane\-plustek (5) for details. The Mustek BearPaw 1200F is supported by the MA-1509 backend. See .BR sane\-ma1509 (5) @@ -36,7 +36,7 @@ see .BR sane\-gt68xx (5). .PP This backend can only work with scanners that are already detected by the -operating system. See +operating system. See .BR sane\-usb (5) for details. .PP @@ -70,7 +70,7 @@ The contents of the .I mustek_usb.conf file is a list of options and device names that correspond to Mustek USB scanners. Empty lines and lines starting with a hash mark (#) are -ignored. If a device name is placed in +ignored. If a device name is placed in .IR mustek_usb.conf , it must be followed by a line containing the keyword .B option @@ -81,7 +81,7 @@ and an option specifying the scanner type. The following options can be used: .BR 1200ub . For the Trust Compact Scan USB 19200 use `option 1200ub'. .PP -Instead of using the device name, the scanner can be autodetected by +Instead of using the device name, the scanner can be autodetected by .B "usb vendor_id product_id" statements which are already included into .IR mustek_usb.conf . @@ -89,7 +89,7 @@ This is only supported with Linux 2.4.8 and higher and all systems that support libsub. "vendor_id" and "product_id" are hexadecimal numbers that identify the scanner. If this doesn't work, a device name and the option specifying the scanner type must be placed in -.I mustek_usb.conf +.I mustek_usb.conf as described above. .PP The global @@ -114,7 +114,7 @@ option 600cu The first line is ignored. The second line sets the buffer size to a maximum of 1024 bytes. The third line tries to autodetect a scanner with vendor id 0x055f and product id 0x0001 (Mustek 1200 CU). The fourth line tells the backend to -attach to +attach to .I /dev/usb/scanner0 and the fifth line specifies that .I /dev/usb/scanner0 @@ -151,7 +151,7 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_MUSTEK_USB If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. .ft CR .nf @@ -167,7 +167,7 @@ Value Description .fi .ft R -Example: +Example: export SANE_DEBUG_MUSTEK_USB=4 .SH "SEE ALSO" diff --git a/doc/sane-mustek_usb2.man b/doc/sane-mustek_usb2.man index b134afa..dab26dc 100644 --- a/doc/sane-mustek_usb2.man +++ b/doc/sane-mustek_usb2.man @@ -9,7 +9,7 @@ library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on the Service & Quality SQ113 chipset. At the moment, only the Mustek BearPaw 2448 TA Pro is supported. It's planned to add support for other scanners that are based on the SQ113 and maybe SQ11 chip. For -more details, see the mustek_usb2 backend homepage: +more details, see the mustek_usb2 backend homepage: .IR http://www.meier\-geinitz.de/sane/mustek_usb2\-backend/ . .PP This is BETA software. Especially if you test new or untested scanners, keep @@ -44,9 +44,9 @@ support dynamic loading). .B SANE_DEBUG_MUSTEK_USB2 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels -increase the verbosity of the output. +increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_MUSTEK_USB2=4 .SH "SEE ALSO" diff --git a/doc/sane-nec.man b/doc/sane-nec.man index 0fd895e..e36ebe9 100644 --- a/doc/sane-nec.man +++ b/doc/sane-nec.man @@ -9,7 +9,7 @@ library implements a SANE (Scanner Access Now Easy) backend that provides access to NEC SCSI scanners. This backend should be considered .B alpha-quality -software! In the current state it is known to work with PC-IN500/4C +software! In the current state it is known to work with PC-IN500/4C scanners. Another MultiReader scanner series is not supported. PC-IN 500/4C and MultiReader scanner are only sold in Japan.(except Multi Reader PetiScan.) diff --git a/doc/sane-p5.man b/doc/sane-p5.man index 860a019..1c21f12 100644 --- a/doc/sane-p5.man +++ b/doc/sane-p5.man @@ -7,28 +7,28 @@ The .B sane\-p5 library implements a SANE (Scanner Access Now Easy) backend that provides access to the Primax PagePartner parallel port sheet fed scanner. -.PP +.PP This backend handles 100, 150, 200, 300 and 600 dpi scan resolutions, in color and gray modes. The 600 dpi is actually 300x600 with lines enlarged to match the vertical resolution. -.PP +.PP .B EPP/ECP MODES ONLY -The current version of the backend uses only EPP or ECP mode to communicate -with the scanner. It is -recommended that you set your parallel port to EPP in BIOS with the current +The current version of the backend uses only EPP or ECP mode to communicate +with the scanner. It is +recommended that you set your parallel port to EPP in BIOS with the current version of this backend. ECPEPP will only work if you use a 2.4 or 2.6 kernel with ppdev character device support. -.PP +.PP .SH "DEVICE NAMES" This backend expects device names of the form: -.PP +.PP .RS .I port value .RE -.PP +.PP Where -\fBvalue\fR is : +\fBvalue\fR is : .RS .TP @@ -40,43 +40,43 @@ them for scanner uses linux ppdev device, depending on the number of available parallel port, you have to use /dev/parport1, /dev/parport2, ... -.PP +.PP .RE You can rename any device using the -.PP +.PP .RS .br .I option name my_name .RE -.PP -option. This option apply to the last port option. +.PP +option. This option apply to the last port option. .SH "CONFIGURATION" Please make sure to edit dll.conf .B before you use the backend, since this backend isn't enabled by default. -.PP +.PP -.PP +.PP .SH "FILES" -.TP +.TP .I @CONFIGDIR@/p5.conf The backend configuration file (see also description of .B SANE_CONFIG_DIR below). -.TP +.TP .I @LIBDIR@/libsane\-p5.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-p5.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are @@ -90,14 +90,14 @@ directories. For example, setting .B SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "@CONFIGDIR@" being searched (in this order). -.TP +.TP .B SANE_DEBUG_P5 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 255 requests all debug output to be printed. Smaller levels reduce verbosity. -.PP +.PP .RS .ft CR .nf @@ -108,23 +108,23 @@ level debug output 2 warnings & minor errors 4 information messages 8 start/stop of functions - 16 tracing messages + 16 tracing messages 32 I/O functions 64 I/O functions with traces 128 scanned/calibration data .fi .ft R .RE -.PP -.TP +.PP +.TP -.PP +.PP .RS .ft CR .nf -.PP - -.PP +.PP + +.PP .SH "SEE ALSO" sane(7), sane\-net(5), saned(8) @@ -136,25 +136,26 @@ Support for the Prima PagePartner has been made possible thank to an hardware do by S\['e]bastien Lange. .SH "BUG REPORTS" -If something doesn't work mail sane-devel@lists.alioth.debian.org or use the bug -tracker at https://alioth.debian.org/tracker/?atid=410366&group_id=30186 . -Please give as much information as you can. +If something doesn't work mail sane-devel@alioth-lists.debian.net or submit an +issue via https://gitlab.com/sane-project/backends/issues/new with a label of +backend/p5. +Please give as much information as you can. -.TP +.TP .I SANE version run "scanimage \-V" to determine this -.TP +.TP .I the backend version and your scanner hardware run "SANE_DEBUG_P5=255 scanimage \-L 2>log" as root. If you don't get any output from the p5 backend, make sure a line "p5" is included into your @CONFIGDIR@/dll.conf. If your scanner isn't detected, make sure you've defined the right port address, or the -correct device +correct device in your p5.conf. -.TP +.TP .I the name of your scanner/vendor also a worthy information. Please also include the optical resolution and lamp type of your scanner, both can be found in the manual of your scanner. -.TP +.TP .I any further comments if you have comments about the documentation (what could be done better), or you think I should know something, please include it. diff --git a/doc/sane-pint.man b/doc/sane-pint.man index 7e863a5..1a59608 100644 --- a/doc/sane-pint.man +++ b/doc/sane-pint.man @@ -21,7 +21,7 @@ successfully. If have successfully used the PINT driver with your scanner, but it does not work using this SANE backend, please let us know. To do this, send a mail with the relevant information for your scanner to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. diff --git a/doc/sane-pixma.man b/doc/sane-pixma.man index 1058e92..ea85ec5 100644 --- a/doc/sane-pixma.man +++ b/doc/sane-pixma.man @@ -1,4 +1,4 @@ -.TH "sane\-pixma" "5" "20 May 2017" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.TH "sane\-pixma" "5" "28 Dec 2019" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" .IX sane\-pixma .SH NAME sane\-pixma \- SANE backend for Canon Multi-Function Printers and CanoScan Scanners @@ -8,20 +8,24 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to Canon PIXMA / i-SENSYS / imageCLASS / imageRUNNER multi-function devices (All-in-one printers) and the Canon CanoScan Flatbed/TPU scanners. -The backend implements both the USB interface and network interface -(using Canon's BJNP and MFNP protocols). The network interface supports scanners +The backend implements both the USB interface and network interface +(using Canon's BJNP and MFNP protocols). The network interface supports scanners over IPv4 as well as IPv6 (MFNP over IPv6 is untested). .PP Currently, the following models work with this backend: .PP .RS -PIXMA MG2100, MG2200, MG2400, MG2500, MG2900, MG3100, MG3200 +PIXMA E510 .br -PIXMA MG3500, MG3600, MG4200, MG5100, MG5200, MG5300, MG5400 +PIXMA G2000, G2010, G2100 .br -PIXMA MG5500, MG5600, MG5700, MG6100, MG6200, MG6300, MG6400 +PIXMA MG2100, MG2200, MG2400, MG2500, MG2900, MG3000, MG3100 .br -PIXMA MG7100, MG7500, MG7700, MG8200 +PIXMA MG3200, MG3500, MG3600, MG4200, MG5100, MG5200, MG5300 +.br +PIXMA MG5400, MG5500, MG5600, MG5700, MG6100, MG6200, MG6300 +.br +PIXMA MG6400, MG7100, MG7500, MG7700, MG8200 .br PIXMA MP140, MP150, MP160, MP170, MP180, MP190 .br @@ -47,8 +51,12 @@ PIXMA MX410, MX420, MX470, MX510, MX520, MX530, MX700, MX720 .br PIXMA MX850, MX860, MX870, MX882, MX885, MX890, MX920, MX7600 .br +PIXMA TS3100, TS5000, TS6100, TS6200, TS8000, TS8200 +.br PIXUS MP10 .br +imageCLASS MF634Cdw, MF733Cdw +.br imageCLASS MF3110, MF3240, MF4010, MF4018 .br imageCLASS MF4120, MF4122, MF4140, MF4150 @@ -57,17 +65,23 @@ imageCLASS MF4270, MF4350d, MF4370dn, MF4380dn .br imageCLASS MF4410, MF4430, MF4570dw, MF4660, MF4690 .br -imageCLASS MF5730, MF5770, MF6550, MPC200, D420, D480, D530 +imageCLASS MF5730, MF5770, MF6550, MPC200 .br -i-SENSYS MF230, MF240, MF3010, MF4320d, MF4330d, MF4500, MF4700 +imageCLASS D420, D480, D530, D570 .br -i-SENSYS MF4800, MF6100, MF8200C, MF8300 +i-SENSYS MF210, MF230, MF240, MF620, MF630, MF640, MF645C, MF730 .br -imageRUNNER 1020/1024/1025 +i-SENSYS MF731/733, MF741/743, MF3010, MF4320d, MF4330d, MF4500 +.br +i-SENSYS MF4700, MF4800, MF6100, MF8030, MF8200C, MF8300 +.br +imageRUNNER 1020/1024/1025, 1133 .br CanoScan 8800F, 9000F, 9000F Mark II .br -MAXIFY MB5000 (ADF is not working) +CanoScan LiDE 300, 400 +.br +MAXIFY MB2000, MB2100, MB2300, MB2700, MB5000, MB5400 .RE .PP The following models are not well tested and/or the scanner sometimes hangs @@ -77,46 +91,57 @@ and must be switched off and on. PIXMA MP760, MP770, MP780, MP790 .RE .PP -The following models may use the same Pixma protocol as those listed -above, but have not yet been reported to work (or not). They are declared -in the backend so that they get recognized and activated. +The following models may use the same Pixma protocol as those listed +above, but have not yet been reported to work (or not). They are declared +in the backend so that they get recognized and activated. Feedback in the sane\-devel mailing list welcome. .PP .RS -PIXMA E400, E460, E470, E480, E500, E510, E560, E600, E610 +PIXMA E400, E410, E460, E470, E480, E500, E560, E600, E610 .br -PIXMA MG3000, MG4100, MG6500, MG6600, MG6800, MG6900, MG8100 +PIXMA E3100, E3300, E4200 +.br +PIXMA MG4100, MG6500, MG6600, MG6800, MG6900, MG8100 .br PIXMA MP375R, MP493, MP495, MP740 .br PIXMA MX320, MX390, MX430, MX450, MX490, MX710 .br -PIXMA G3000 +PIXMA G3000, G3010, G4000, G4010, G6000, G6080 +.br +PIXMA TR4500, TR7500, TR7530, TR8500, TR8530, TR8580, TR9530 +.br +PIXMA TS5100, TS6000, TS6130, TS6180, TS6230, TS6280, TS6300 +.br +PIXMA TS6330, TS6380, TS7330, TS8100, TS8130, TS8180, TS8230 .br -PIXMA TS9000, TS800, TS6000, TS5000 +PIXMA TS8280,, TS8300, TS8330, TS8380, TS9000, TS9100, TS9180 .br -PIXUS MP5 +PIXMA TS9500, TS9580 .br -imageCLASS MF810/820, MF5630, MF5650, MF5750, MF8030, MF8170c +PIXUS MP5, XK50, XK60, XK70, XK80 .br -imageCLASS MPC190 +imageCLASS MF810/820, MF5630, MF5650, MF5750, MF8170c .br -imageRUNNER 1133 +imageCLASS MPC190, D550 .br -i-SENSYS MF210, MF220, MF5880dn, MF5900, MF6680dn, MF8500C +i-SENSYS MF110, MF220, MF260, MF410, MF420, MF510, MF520, MF740 .br -MAXIFY MB2000, MB2300, MB5300 +i-SENSYS MF5880dn, MF5900, MF6680dn, MF8500C +.br +MAXIFY MB5100, MB5300 +.RE +.PP +The following models may use partly the same Pixma protocol as other devices +listed above, but may still need some work. They are declared in the backend +as experimental and need the environment variable PIXMA_EXPERIMENT=1 to get +recognized and activated. Snoop logs are required to further investigate, +please contact the sane\-devel mailing list. +.PP +.RS +\-\- none \-\- .RE .PP -\#The following models may use partly the same Pixma protocol as other devices -\#listed above, but may still need some work. They are declared in the backend -\#as experimental. Snoop logs are required to further investigate, please contact -\#the sane\-devel mailing list. -\#.PP -\#.RS -\#PIXMA MP--- -\#.RE -\#.PP The backend supports: .PP .RS @@ -133,7 +158,7 @@ The backend supports: .PP The device name for USB devices is in the form pixma:xxxxyyyy_zzzzz where x, y and z are vendor ID, product ID and serial number respectively. -.PP +.PP Example: pixma:04A91709_123456 is a MP150. .PP Device names for BJNP/MFNP devices is in the form pixma:aaaa_bbbbb @@ -141,12 +166,12 @@ where aaaa is the scanners model and bbbb is the hostname or ip-adress. .PP Example: pixma:MF4800_192.168.1.45 is a MF4800 Series multi-function peripheral. .PP -This backend, based on cloning original Canon drivers protocols, is in +This backend, based on cloning original Canon drivers protocols, is in a production stage. Designed has been carried out without any applicable -manufacturer documentation, probably never available. However, we have tested -it as well as we could, but it may not work in all situations. You will find -an up-to-date status at the project homepage. (See below). -Users feedback is essential to help improve features and performances. +manufacturer documentation, probably never available. However, we have tested +it as well as we could, but it may not work in all situations. You will find +an up-to-date status at the project homepage. (See below). +Users feedback is essential to help improve features and performances. .SH OPTIONS Besides "well-known" options (e.g. resolution, mode etc.) pixma backend also provides the following options, i.e. the options might change in the future. @@ -178,20 +203,20 @@ the button and so on. When you finished, press the gray-scan button. (For MP150 you have to stop the frontend by pressing Ctrl-C for example.) .TP .I button\-update (deprecated) -(write only) In the past this option was required to be set to force +(write only) In the past this option was required to be set to force reading of the button status for .I button\-1 and .I button\-2. -The +The .B sane\-pixma -no longer requires this option to be used: if no fresh data is available, it -will be now requested automatically from the scanner. This option is left for +no longer requires this option to be used: if no fresh data is available, it +will be now requested automatically from the scanner. This option is left for backward compatibility reasons. .TP .I button\-1 button\-2 (read only) These options will return the value of the respective buttons. -value 0 means that the button was not pressed, 1 is returned when the button +value 0 means that the button was not pressed, 1 is returned when the button was pressed. Some scanners with more than two buttons send the button number as target. .TP @@ -225,81 +250,105 @@ support dynamic loading). .I @CONFIGDIR@/pixma.conf The backend configuration file (see also description of .B SANE_CONFIG_DIR -below). The file contains an optional list of networked scanners. Normally -only scanners that cannot be auto-detected because they are on a different -subnet shall be listed here. If your OS does not allow enumeration of -interfaces (i.e. it does not support the getifaddrs() function) you also may need -to add your scanner here as well. +below). .RS .PP -.I Scanners shall be listed in the configuraton file as follows: +The file contains an optional list of networked scanners using the BJNP or MFNP protools +(See below for datails on networking support for scanners). Normally +only scanners that cannot be auto-detected because they are on a different +subnet shall be listed here. If you do not use Linux and your OS does not allow enumeration of +interfaces (i.e. it does not support the getifaddrs() function) you also may need +to add your scanner here as well. +.PP +.I Scanners shall be listed in the configuration file as follows: .PP .RS .I <method>://<host>[:port][/timeout=<value>] .RE .PP where method indicates the protocol used (bjnp is used for inkjet multi-functionals -and mfnp is used for laser multi-functionals). +and mfnp is used for laser multi-functionals). .PP -host is the hostname or IP address of the scanner, e.g. bjnp://10.0.1.4 -for IPv4, bjnp://[2001:888:118e:18e2:21e:8fff:fe36:b64a] for a literal +host is the hostname or IP address of the scanner, e.g. bjnp://10.0.1.4 +for IPv4, bjnp://[2001:888:118e:18e2:21e:8fff:fe36:b64a] for a literal IPv6-address or bjnp://myscanner.mydomain.org for a hostname. .PP The port number is optional and in normally implied by the method. Port 8610 is the standard port for mfnp, 8612 for bjnp. .PP -A scanner specific timeout value for the network protocol can be set using the +A scanner specific timeout value for the network protocol can be set using the bjnp-timeout parameter. The value is in ms. .PP Define scanners each on a new line. .PP -More globally applicable tinmeouts can be set using the bjnp-timeout parameter as folllows: +More globally applicable timeouts can be set using the bjnp-timeout parameter as follows: .PP .RS .I bjnp-timeout=<value> .RE .PP A timeout defined using bjnp-timeout will apply to the following scanner definitions -in the file. If required the bjnp-timeout setting +in the file. If required the bjnp-timeout setting can be defined multiple times, where each settng will apply only to the scanners that follow the setting. The last setting is used for the auto discovered scanners. -If not explicitely set, the default 1000ms setting will apply. +If not explicitly set, the default 1000ms setting will apply. .PP Setting timeouts should only be required in exceptional cases. .PP +.RE +.PP +If so desired networking can be disbled as follows: +.RS +.IP - +If the first non-commented line contains +.B networking=no +all networking will be disabled. +This will cause all further statements in the configuration file to be ignored. +.IP - +A line that contains +.B auto_detection=no +will cause auto-detection to be skipped. Explicitely defined network scanners will still be probed. .SH USB SUPPORT USB scanners will be auto-detected and require no configuration. .SH NETWORKING SUPPORT -The pixma backend supports network scanners using the so called Canon BJNP -protocol and MFNP protocol. Both IPv4 and IPv6 are supported, but IPv6 is as +The pixma backend supports network scanners using the so called Canon BJNP +and MFNP protocols. +.PP +Canon seems to be dropping support for these protocols in recent scanners. +To verify if your scanner supports one of these protocols, check the content of +the _scanner._tcp service entry in mDNS/DNS-SD (using for example avahi-discover). +If that does not list port 8610 +or 8612 your scanner probably does not support the mfmp or bjnp protols. +.PP +Both IPv4 and IPv6 are supported, but IPv6 is as yet untested with MFNP. Please report your results on the mailing list. .PP Configuration is normally not required. The pixma backend will auto-detect your scanner if it is within the same subnet as your computer if your OS does support this. .PP -If your scanner can not be auto-detected, you can add it to the pixma +If your scanner can not be auto-detected, you can add it to the pixma configuration file (see above). .SH FIREWALLING FOR NETWORKED SCANNERS -The sane pixma backend communicates with port 8610 for MFNP or port 8612 +The sane pixma backend communicates with port 8610 for MFNP or port 8612 for BJNP on the scanner. So -you will have to allow outgoing traffic TO port 8610 or 8612 on the +you will have to allow outgoing traffic TO port 8610 or 8612 on the common subnet for scanning. .PP Scanner detection is slightly more complicated. The pixma backend sends -a broadcast on all direct connected subnets it can find (provided your OS -allows for enumeration of all netowrk interfaces). The broadcast is sent FROM +a broadcast on all direct connected subnets it can find (provided your OS +allows for enumeration of all netowrk interfaces). The broadcast is sent FROM port 8612 TO port 8610 or 8612 on the broadcast address of each interface. The outgoing packets will be allowed by the rule described above. .PP Responses from the scanner are sent back to the computer TO port 8612. Connection tracking however does not see a match as the response does not come from the broadcast address but from the scanners own address. -For automatic detection of your scanner, you will therefore have to allow +For automatic detection of your scanner, you will therefore have to allow incoming packets TO port 8612 on your computer. This applies to both MFNP and BJNP. .PP -So in short: open the firewall for all traffic from your computer to port +So in short: open the firewall for all traffic from your computer to port 8610 (for MFNP) or 8612 (for BJNP) AND to port 8612 (for both BJNP and MFNP) to your computer. .PP @@ -331,7 +380,7 @@ the verbosity and includes the information printed at the lower levels. .TP .B SANE_DEBUG_BJNP If the library was compiled with debug support enabled, this environment -variable controls the debug level for the +variable controls the debug level for the .B BJNP and MFNP network protocols for this backend. Higher value increases the verbosity and includes the information printed at the lower levels. @@ -341,7 +390,7 @@ the verbosity and includes the information printed at the lower levels. 1 Print error and warning messages (recommended) .br 2 Print high level function tracing information -.br +.br 3 Print more detailed protocol tracing information .br 4 Print protocol headers @@ -369,13 +418,11 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .SH "SEE ALSO" .BR sane (7), .BR sane\-dll (5), -.I http://home.arcor.de/wittawat/pixma/, -.I http://mp610.blogspot.com/ .PP -In case of trouble with a recent Pixma model, try the latest code for +In case of trouble with a recent Pixma model, try the latest code for the pixma backend, available in the Sane git repository at: .br -.I http://git.debian.org/?p=sane/sane-backends.git +.I https://gitlab.com/sane-project/backends.git .PP You can also post into the Sane-devel mailing list for support. diff --git a/doc/sane-plustek.man b/doc/sane-plustek.man index a6bb993..2df85b6 100644 --- a/doc/sane-plustek.man +++ b/doc/sane-plustek.man @@ -1,4 +1,4 @@ -.TH sane\-plustek 5 "13 Feb 2013" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.TH sane\-plustek 5 "03 Nov 2017" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" .IX sane\-plustek .SH NAME sane\-plustek \- SANE backend for LM983[1/2/3] based @@ -241,7 +241,7 @@ The Options: option warmup t .RS .I t -specifies the warmup period in seconds, if set to \-1, the +specifies the warmup period in seconds, if set to \-1, the automatic warmup function will be used .RE .PP @@ -468,8 +468,6 @@ export SANE_DEBUG_PLUSTEK=10 .BR sane\-gt68xx (5), .br .I @DOCDIR@/plustek/Plustek-USB.changes -.br -.I http://www.gjaeger.de/scanner/plustek/ .SH "CONTACT AND BUG-REPORTS" Please send any information and bug-reports to: @@ -482,16 +480,12 @@ Mailing-List archive at: .br .B http://www.sane\-project.org/mailing\-lists.html .PP -or directly from the projects' homepage at: -.br -.B http://www.gjaeger.de/scanner/plustek/ -.PP To obtain debug messages from the backend, please set the environment-variable .I SANE_DEBUG_PLUSTEK -before calling your favorite scan-frontend (i.e. xscanimage). +before calling your favorite scan-frontend (i.e. scanimage). .br -.B i.e.: export SANE_DEBUG_PLUSTEK=20 ; xscanimage +.B i.e.: export SANE_DEBUG_PLUSTEK=20 ; scanimage .PP The value controls the verbosity of the backend. Please note, that values greater than 24 force the backend to output raw data files, @@ -505,13 +499,13 @@ For problem reports it should be enough the set the verbosity to * The driver does not support these manic scalings up to 16 times the physical resolution. The only scaling is done on resolutions between the physical resolution -of the CCD-/CIS-sensor and the stepper motor i.e. you -have a 600x1200 dpi scanner and you are scanning using -800dpi, so scaling is necessary, because the sensor only -delivers 600dpi but the motor is capable to perform +of the CCD-/CIS-sensor and the stepper motor i.e. you +have a 600x1200 dpi scanner and you are scanning using +800dpi, so scaling is necessary, because the sensor only +delivers 600dpi but the motor is capable to perform 1200dpi steps. .PP -* Plusteks' model policy is somewhat inconsistent. They +* Plusteks' model policy is somewhat inconsistent. They sell technically different devices under the same product name. Therefore it is possible that some devices like the UT12 or U12 won't work \- please check diff --git a/doc/sane-plustek_pp.man b/doc/sane-plustek_pp.man index c01aba6..3d70971 100644 --- a/doc/sane-plustek_pp.man +++ b/doc/sane-plustek_pp.man @@ -13,7 +13,7 @@ The access of the scanner is either done directly by the backend or via kernel module, called pt_drv which can be created out of the plustek_pp backend code \- see also section .B "BUILDING THE KERNEL MODULE" -for further information. +for further information. .SH "SUPPORTED DEVICES" @@ -242,13 +242,13 @@ Within this directory, you should find a script called: .br .I MakeModule.sh .br -Now if your Linux kernelsources are installed correctly, -it should be possible to build, install and load the +Now if your Linux kernelsources are installed correctly, +it should be possible to build, install and load the module .B pt_drv. -.B Please note, +.B Please note, that the kernelsources need to be configured correctly. -Refer to your distributions +Refer to your distributions manual on how this is done. As root user, try .br .I ./MakeModule.sh @@ -257,7 +257,7 @@ the script will try and get all necessary information about your running kernel and will lead you through the whole installation process. .br -.B Note: Installing and loading the can only be done as +.B Note: Installing and loading the can only be done as superuser. .PP @@ -448,8 +448,6 @@ export SANE_DEBUG_PLUSTEK_PP=10 .BR sane (7), .br .I @DOCDIR@/plustek/Plustek\-PARPORT.changes -.br -.I http://www.gjaeger.de/scanner/plustek_pp/ .SH "CONTACT AND BUG-REPORTS" Please send any information and bug-reports to: @@ -462,10 +460,6 @@ Mailing-List archive at: .br .B http://www.sane\-project.org/mailing\-lists.html .PP -or directly from the projects' homepage at: -.br -.B http://www.gjaeger.de/scanner/plustek_pp/ -.PP To obtain debug messages from the backend, please set the environment-variable .I SANE_DEBUG_PLUSTEK_PP @@ -510,7 +504,7 @@ and without transparency unit. * 30bit mode is currently not supported. .PP * On low end systems under heavy system load the -driver may lose data, which can result in picture +driver may lose data, which can result in picture corruption or cause the sensor to hit the scan bed. .PP * The scanning speed on 600x1200 dpi models is slow. diff --git a/doc/sane-ricoh.man b/doc/sane-ricoh.man index 8cb38a2..1452e24 100644 --- a/doc/sane-ricoh.man +++ b/doc/sane-ricoh.man @@ -26,8 +26,8 @@ Where .I special is the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI device or a -symlink to such a device. The program -.IR sane\-find\-scanner +symlink to such a device. The program +.IR sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sga @@ -67,13 +67,12 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_RICOH If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_RICOH=4 .SH "SEE ALSO" sane(7), sane\-scsi(5) .SH AUTHOR Feico W. Dillema - diff --git a/doc/sane-ricoh2.man b/doc/sane-ricoh2.man new file mode 100644 index 0000000..ff74974 --- /dev/null +++ b/doc/sane-ricoh2.man @@ -0,0 +1,59 @@ +.TH sane\-ricoh2 5 "04 Sep 2019" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-ricoh2 +.SH NAME +sane\-ricoh2 \- SANE backend for Ricoh flatbed scanners +.SH DESCRIPTION +The +.B sane\-ricoh2 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to the following Ricoh flatbed scanners: +.PP +.RS +SG-3110SFNw +.br +SG-3100SNw +.br +SP-100SU +.br +SP-111SU (SP-112SU) +.RE +.PP +.SH FILES +.TP +.I @LIBDIR@/libsane\-ricoh2.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-ricoh2.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH OPTIONS +The options the backend supports can either be selected through command line +options to programs like scanimage or through GUI elements in programs like +xscanimage or xsane. +.PP +The following options are supported by ricoh2: + +.B \-\-mode color|gray + +.RS +Color or grayscale mode. +.RE + +.B \-\-resolution 300|600 + +.RS +DPI resolution. + +.RE +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_RICOH2 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. Higher +debug levels increase the verbosity of the output. + +.SH "SEE ALSO" +sane(7), sane\-usb(5) +.SH AUTHOR +Stanislav Yuzvinsky diff --git a/doc/sane-rts8891.man b/doc/sane-rts8891.man index 6424f7a..de0683d 100644 --- a/doc/sane-rts8891.man +++ b/doc/sane-rts8891.man @@ -6,19 +6,19 @@ The .B sane\-rts8891 library implements a SANE (Scanner Access Now Easy) backend that provides access to scanners based on the rts8891 ASIC. -.PP +.PP The scanners that work with this backend are: -.PP +.PP .RS .ft CR -.nf +.nf Vendor Model status \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\- Umax Astra 4400 untested Umax Astra 4450 untested HP scanjet 4000c good HP scanjet 4470c good -.fi +.fi .ft R .RE @@ -26,58 +26,58 @@ The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in xscanimage or xsane. -.br +.br If you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d rts8891 .RE -.TP +.TP .B Scan Mode Options -.TP +.TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .I R Color , .I Gray and .I Lineart -The default mode is Color. The Lineart mode is black and white only (1 bit). +The default mode is Color. The Lineart mode is black and white only (1 bit). Grayscale will produce 256 levels of gray (8 bits). Color mode allows for over 16 million different colors produced from 24 bits of color information. -.TP +.TP .B \-\-resolution -selects the resolution for a scan. The horizontal and vertical resolutions are set +selects the resolution for a scan. The horizontal and vertical resolutions are set by the value of this option. The scanner is capable of the following resolutions for the specified option value: -.PP +.PP .RS .ft CR -.nf - Value Hor. Resolution Vert. Resolution +.nf + Value Hor. Resolution Vert. Resolution \-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- 75 75dpi 75dpi - 150 150dpi 150dpi - 300 300dpi 300dpi - 600 600dpi 600dpi + 150 150dpi 150dpi + 300 300dpi 300dpi + 600 600dpi 600dpi 1200 1200dpi 1200dpi -.fi +.fi .ft R .RE -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 75 dpi -and the scan area and the scan mode are as specified through their options, +and the scan area and the scan mode are as specified through their options, or the default if not specified. The default value for preview mode is "no". -.TP +.TP .B \-\-threshold selects the minimum\-brightness to get a white point. The threshold is only used with Lineart mode scans. -It is specified as a percentage in the range 0..100% (in steps of 1). +It is specified as a percentage in the range 0..100% (in steps of 1). The default value of the threshold option is 50. @@ -87,11 +87,11 @@ The configuration file contains the usb device ids of supported scanners (eg usb 0x043d 0x007c) and scanner configuration options. Empty lines and lines starting with a hash mark (#) are ignored. -.PP +.PP The options supported are .B allowsharing , -.B modelnumber +.B modelnumber . Option @@ -103,27 +103,27 @@ enables or not the sharing of the scanner between multiple frontends at the same is used to force the reported model by the backend and is only useful in the case of a scanner which NVRAM has been erased. .RS .ft CR -.nf +.nf 0 to report a HP4470c. 1 to report a HP4400c. 2 to report an Astra 4400. -.fi +.fi .ft R .RE -.PP +.PP .SH "FILES" -.TP +.TP .I @LIBDIR@/libsane\-rts8891.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-rts8891.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_DEBUG_RTS8891 SANE_DEBUG_RTS8891_LOW SANE_DEBUG_RTS88XX_LIB If the library was compiled with debug support enabled, these environment variables controls the debug level for this backend. E.g., @@ -139,7 +139,7 @@ at the same time (allowsharing option) may not work on some USB controllers. .PP XPA is no (yet) supported. .SH "BUGS" -.br +.br No bugs currently known. @@ -148,11 +148,11 @@ sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7) .SH "AUTHOR" -.TP +.TP This backend has been developed by St\['e]phane Voltz. .I http://stef.dev.free.fr/sane/rts8891 .SH "CREDITS" -.TP +.TP Many thanks go to: Laurent Fournier who donated me a HP4470c. Vladimir Sysoev and "TheUnruly Squash" for the time they spent recording diff --git a/doc/sane-s9036.man b/doc/sane-s9036.man index fe194b6..468b44e 100644 --- a/doc/sane-s9036.man +++ b/doc/sane-s9036.man @@ -19,8 +19,8 @@ Where .I special is the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI device or a -symlink to such a device. The program -.IR sane\-find\-scanner +symlink to such a device. The program +.IR sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sga @@ -60,9 +60,9 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_S9036 If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_S9036=4 .SH "SEE ALSO" diff --git a/doc/sane-sceptre.man b/doc/sane-sceptre.man index 9c34413..b60da27 100644 --- a/doc/sane-sceptre.man +++ b/doc/sane-sceptre.man @@ -29,7 +29,7 @@ The make of this scanner is KINPO, so other scanners from that manufacturer may The options the backend supports can either be selected through command line options to programs like scanimage or through GUI elements in xscanimage or xsane. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d sceptre .RE @@ -38,9 +38,9 @@ scanimage \-\-help \-d sceptre .B Scan Mode .TP -.B \-\-mode -selects the basic mode of operation of the scanner valid choices are -.I Lineart, Halftone, Gray and Color. +.B \-\-mode +selects the basic mode of operation of the scanner valid choices are +.I Lineart, Halftone, Gray and Color. The Lineart and Halftone mode are black and white only (1 bit). Gray will produce 256 levels of gray (8 bits). Color will produce a 24 bits color image. The scanner supports 30 bits internally but it only @@ -56,7 +56,7 @@ resolutions between 50 and 1200. selects the pattern mode that is used in Halftone mode. Valid options are 1, 2, 3 and 4. -.TP +.TP .B \-\-gamma\-correction controls the scanner internal gamma correction. Valid options are "Default", "User defined", "High density printing" "Low density @@ -67,18 +67,18 @@ printing" and "High contrast printing". (color mode only) allows the user to specify a gamma table (see the next 3 parameters). -.TP -.B \-\-red\-gamma\-table +.TP +.B \-\-red\-gamma\-table (color mode only) can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. -.TP -.B \-\-green\-gamma\-table +.TP +.B \-\-green\-gamma\-table (color mode only) can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. .TP -.B \-\-blue\-gamma\-table +.B \-\-blue\-gamma\-table (color mode only) can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. @@ -87,7 +87,7 @@ for the blue channel. The table must be 256 bytes long. sets the threshold for black and white pixels in lineart mode. Possible values are from 0 (darker) to 255 (lighter). -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 30 dpi and the scan area is the maximum allowed. The scan mode is user @@ -97,7 +97,7 @@ selected. The default is "no". .B The geometry options .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters by default. diff --git a/doc/sane-scsi.man b/doc/sane-scsi.man index bcb7d77..5a27555 100644 --- a/doc/sane-scsi.man +++ b/doc/sane-scsi.man @@ -21,9 +21,9 @@ to the generic SCSI device that the scanner is connected to. In this case, the configuration file simply lists the line .BR /dev/scanner . For a detailed description of each backend's configuration file, -please refer to the relevant backend manual page (e.g., +please refer to the relevant backend manual page (e.g., .BR sane\-epson (5) -for Epson scanners, +for Epson scanners, .BR sane\-hp (5) for HP scanners, etc.). .PP @@ -65,7 +65,7 @@ will be probed by the backend one by one and registered if the backend thinks it is a compatible device. For example, the line .PP .RS -scsi MUSTEK MFS\-06000CX Scanner 0 00 03 00 +scsi MUSTEK MFS\-06000CX Scanner 0 00 03 00 .RE .PP would attach the Mustek SCSI scanner with the following /proc/scsi/scsi entry: @@ -84,7 +84,7 @@ Usually it's sufficient to use vendor and model strings only or even only the vendor string. The following example .PP .RS -scsi MUSTEK * * * * * * +scsi MUSTEK * * * * * * .RE .PP would have the effect that all SCSI devices in the system with a @@ -188,10 +188,10 @@ version 2.2.7 on. If the new SG driver is available some backends buffers. If a backend does not automatically request a larger scsi buffer, set the environment variable .B SANE_SG_BUFFERSIZE -to the desired buffer size in bytes. It is not recommended to use more -than 1 MB, because for large values the probability increases that the -SG driver cannot allocate the necessary buffer(s). For ISA cards, even -1 MB might be a too large value. For a detailed discussion of memory +to the desired buffer size in bytes. It is not recommended to use more +than 1 MB, because for large values the probability increases that the +SG driver cannot allocate the necessary buffer(s). For ISA cards, even +1 MB might be a too large value. For a detailed discussion of memory issues of the SG driver, see http://www.torque.net/sg. .PP For Linux kernels before version 2.2.7 the size of the buffer is only 32KB. @@ -266,7 +266,7 @@ therefore while a scan is in progress, the system becomes almost unusable. You may change the values of the USLEEP macros in drivers/scsi/g_NCR5380.c. Some documentation is in this file and NCR5380.c. .TP -NCR/Symbios 810 +NCR/Symbios 810 For some scanners it may be necessary to disable disconnect/reconnect. To achieve this use the option ncr53c8xx="disc:n". Some people reported that their scanner only worked with the 53c7,8xx driver, not the ncr53c8xx. Try @@ -315,7 +315,7 @@ of 255 also prints kernel messages from the SCSI subsystem (where available). Smaller levels reduce verbosity. .TP .B SANE_SCSICMD_TIMEOUT -sets the timeout value for SCSI commands in seconds. Overriding the default +sets the timeout value for SCSI commands in seconds. Overriding the default value of 120 seconds should only be necessary for very slow scanners. .SH "SEE ALSO" diff --git a/doc/sane-sharp.man b/doc/sane-sharp.man index f089538..b4453ee 100644 --- a/doc/sane-sharp.man +++ b/doc/sane-sharp.man @@ -9,7 +9,7 @@ library implements a SANE (Scanner Access Now Easy) backend that provides access to Sharp SCSI scanners. This backend should be considered .B beta-quality -software! In the current state it is known to work with JX-610 and JX-250 +software! In the current state it is known to work with JX-610 and JX-250 scanners. It is prepared for usage with the JX-330 series scanners, but we are not able to test it with these devices. .PP @@ -63,18 +63,18 @@ for example. See sane\-scsi(5) for details. .SH SCAN OPTIONS .B Scan Mode -(parameter +(parameter .B \-\-mode -for scanimage). Possible settings: +for scanimage). Possible settings: .RS .B Lineart -(1 bit black & white scans), +(1 bit black & white scans), .br .B Gray (8 bit gray scale scans), .br .B Lineart Color -(bi-level color scans), +(bi-level color scans), .br .B Color (8 bit RGB scans). @@ -91,11 +91,11 @@ Possible settings: .B none .br .B Dither Bayer -.br +.br .B Dither Spiral .br .B Dither Dispersed -.br +.br .B Error Diffusion .RE The default value is @@ -114,12 +114,12 @@ feeder or a transparency adapter is installed. Possible settings: .B Transparency Adapter .RE If an ADF or a transparency adapter is installed, using it is the -default selection. +default selection. .B Custom Gamma -(parameter +(parameter .B \-\-custom\-gamma -for scanimage). This option determines whether a builtin or a custom +for scanimage). This option determines whether a builtin or a custom gamma-table is used. Possible settings: .RS .B yes @@ -130,11 +130,11 @@ enables a built gamma table .RE .B Gamma -(parameter +(parameter .B \-\-Gamma -for scanimage). This option is only available, if +for scanimage). This option is only available, if .B Custom Gamma -is set to +is set to .B no. Possible values: .RS @@ -142,32 +142,32 @@ Possible values: .br .B 2.2 .RE -The default value is 2.2. (The JX-250 and JX-350 have no built in gamma -correction; for these scanner, a gamma table is downloaded to the scanner +The default value is 2.2. (The JX-250 and JX-350 have no built in gamma +correction; for these scanner, a gamma table is downloaded to the scanner by the backend.) .B Gamma Table -(parameter +(parameter .B \-\-gamma\-table -for scanimage). Allowed values: 0..255; 256 numbers must be defined. -The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). This table +for scanimage). Allowed values: 0..255; 256 numbers must be defined. +The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). This table is only used for gray scale scans. .B Red Gamma Table -(parameter -.B \-\-red\-gamma\-table +(parameter +.B \-\-red\-gamma\-table for scanimage). Allowed values: 0..255; 256 numbers must be defined. The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). .B Green Gamma Table -(parameter -.B \-\-green\-gamma\-table +(parameter +.B \-\-green\-gamma\-table for scanimage). Allowed values: 0..255; 256 numbers must be defined. The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). .B Blue Gamma Table -(parameter -.B \-\-blue\-gamma\-table +(parameter +.B \-\-blue\-gamma\-table for scanimage). Allowed values: 0..255; 256 numbers must be defined. The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). @@ -177,7 +177,7 @@ in pixel per inch (parameter for scanimage). Selects the resolution of the scanned image. Allowed values: .RS .B 30..600 -(JX-330, JX-350 and JX-610) resp. +(JX-330, JX-350 and JX-610) resp. .B 30..400 (JX-250) .RE @@ -203,19 +203,19 @@ in order to see the allowed parameter values for the scan window. The scan window parameters are: .RS -Top-left x position of scan area (parameter +Top-left x position of scan area (parameter .B \-l for scanimage); .br -Top-left y position of scan area (parameter +Top-left y position of scan area (parameter .B \-t for scanimage); .br -bottom right x position of scan area (parameter +bottom right x position of scan area (parameter .B \-x for scanimage); .br -bottom right y position of scan area (parameter +bottom right y position of scan area (parameter .B \-y for scanimage); .RE @@ -223,7 +223,7 @@ for scanimage); .B Edge emphasis (parameter .B \-\-Edge emphasis -for scanimage). This option is not available for the JX-250 and the JX-350. +for scanimage). This option is not available for the JX-250 and the JX-350. Possible settings: .RS .B None @@ -234,59 +234,59 @@ Possible settings: .br .B Blur .RE -The default value is +The default value is .B None. .B Threshold -(parameter +(parameter .B \-\-threshold for scanimage). Sets the threshold for black and white pixels in lineart mode. Possible values: .RS .B 1..255 .RE -The default value is +The default value is .B 128. This option is only available in scan mode lineart. .B Threshold Red -(parameter +(parameter .B \-\-threshold-red for scanimage). Sets the threshold for the red component of a pixel in in lineart color scan mode. Possible values: .RS .B 1..255 .RE -The default value is +The default value is .B 128. This option is only available in scan mode color lineart. .B Threshold Green -(parameter +(parameter .B \-\-threshold-green for scanimage). Sets the threshold for the green component of a pixel in in lineart color scan mode. Possible values: .RS .B 1..255 .RE -The default value is +The default value is .B 128. This option is only available in scan mode color lineart. .B Threshold Blue -(parameter +(parameter .B \-\-threshold-blue for scanimage). Sets the threshold for the blue component of a pixel in in lineart color scan mode. Possible values: .RS .B 1..255 .RE -The default value is +The default value is .B 128. This option is only available in scan mode color lineart. .B Light Color -(parameter +(parameter .B \-\-LightColor for scanimage). Sets the color of the light source. Possible values: .RS @@ -298,7 +298,7 @@ for scanimage). Sets the color of the light source. Possible values: .br .B blue .RE -The default value is +The default value is .B white. This option is only available in scan modes lineart color and color. @@ -310,75 +310,75 @@ be opened and closed, even if the jammed paper can be removed without opening the maintenance cover. Otherwise, the error condition cannot be cleared. .SH CONFIGURATION -The contents of the +The contents of the .I sharp.conf -file is a list of options and device names that correspond to Sharp +file is a list of options and device names that correspond to Sharp scanners. Empty lines and lines beginning with a hash mark (#) are ignored. See sane\-scsi(5) for details about device names. .PP Lines setting an option start with the key word .B option, followed by the option's name and the option's value. At present, three -options are defined: -.B buffers, buffersize, +options are defined: +.B buffers, buffersize, and -.B readqueue. +.B readqueue. .PP -Options defined at the start of +Options defined at the start of .I sharp.conf apply to all devices; options defined after a device name apply to this device. .PP -The options +The options .B buffers and .B readqueue are only significant if the backend has been compiled -so that for each scan a second process is forked (switch +so that for each scan a second process is forked (switch .B USE_FORK -in +in .I sharp.c ). This process reads the scan data from the scanner and writes this data into a block of shared memory. -The parent process reads the data from this memory block and delivers it -to the frontend. The options control the size and usage of this shared +The parent process reads the data from this memory block and delivers it +to the frontend. The options control the size and usage of this shared memory block. .PP .B option buffers -defines the number of buffers used. The smallest number allowed is 2. +defines the number of buffers used. The smallest number allowed is 2. .PP .B option buffersize -defines the size of one buffer. Since each buffer is filled with a +defines the size of one buffer. Since each buffer is filled with a single read command sent to the scanner, its size is limited automatically to the size allowed by the operating system or by the Sane SCSI library for SCSI read commands. A buffer size of 128 kB or 256 kB is recommended for scan resolutions of 300 dpi and above. .PP -.B option readqueue +.B option readqueue defines how many read commands to be sent to the scanner -are queued. At present, the Sane SCSI library supports queued read -commands only for for Linux. For other operating systems, +are queued. At present, the Sane SCSI library supports queued read +commands only for for Linux. For other operating systems, .B option readqueue -should be set to 0. For Linux, +should be set to 0. For Linux, .B option readqueue should be set to 2. Larger values than 2 for .B option readqueue are not reasonable in most cases. .B option buffers -should be greater than +should be greater than .B option readqueue. .SH Performance Considerations This section focuses on the problem of stops of the scanner's carriage -during a scan. Carriage stops happen mainly with the JX-250. This scanner -has obviously only a small internal buffer compared to its speed. That -means that the backend must read the data as fast as possible from the -scanner in order to avoid carriage stops. +during a scan. Carriage stops happen mainly with the JX-250. This scanner +has obviously only a small internal buffer compared to its speed. That +means that the backend must read the data as fast as possible from the +scanner in order to avoid carriage stops. .PP -Even the JX-250 needs only less than 10 seconds for a 400 dpi A4 gray -scale scan, which results in a data transfer rate of more than 1.6 MB -per second. This means that the data produced by the scanner must be +Even the JX-250 needs only less than 10 seconds for a 400 dpi A4 gray +scale scan, which results in a data transfer rate of more than 1.6 MB +per second. This means that the data produced by the scanner must be processed fairly fast. Due to the small internal buffer of the JX-250, the backend must issue a read request for the next data block as soon as possible after reading a block of data in order to avoid carriage @@ -395,25 +395,25 @@ Stops of the carriage can be caused by the following reasons: .PP .RE Too much "traffic" on the SCSI bus: This happens for example, if hard disks -are connected to the same SCSI bus as the scanner, and when data transfer +are connected to the same SCSI bus as the scanner, and when data transfer from/to these hard disks requires a considerable part of the SCSI bandwidth -during a scan. If this is the case, you should consider to connect the +during a scan. If this is the case, you should consider to connect the scanner to a separate SCSI adapter. .PP Slow responses by the backend to the scanner: Unfortunately, Unix-like operating systems generally have no real time capabilities. Thus there is no guarantee that the backend is under any circumstances able to communicate with the scanner as fast as required. To minimize this -problem, the backend should be compiled so that a separate reader process +problem, the backend should be compiled so that a separate reader process is forked: Make sure that .B USE_FORK -is defined when you compile +is defined when you compile .I sharp.c. If slow responses of the backend remain to be problem, you could try to -reduce the load of the system. Even while the backend and the reader -process need only a minor amount of processor time, other running +reduce the load of the system. Even while the backend and the reader +process need only a minor amount of processor time, other running processes can cause an increase in the time delay between two time -slices given to the reader process. On slower systems, such an +slices given to the reader process. On slower systems, such an increased delay can be enough to cause a carriage stop with the JX-250. For Linux, the usage of the SG driver version 2.1.36 or above is recommended, because it supports, in combination with @@ -424,20 +424,20 @@ This queueing implementation, combined with a buffer size of at least Slow processing of the scan data: An example for this situation is the access to the scanner via a 10 MBit Ethernet, which is definitely too slow to transfer the scan data as fast as they are produced by the -scanner. If you have enough memory available, you can increase +scanner. If you have enough memory available, you can increase .B option buffers, -so that an entire image can be stored in these buffers. +so that an entire image can be stored in these buffers. .PP In order to see, if the backend is too slow or if the further processing of the data is too slow, set the environment variable .B SANE_DEBUG_SHARP to 1. When a scan is finished, the backend writes the line "buffer full -conditions: +conditions: .I nn" to stderr. If .I nn is zero, carriage stops are caused by too slow responses of the backend -or too much "traffic" on the SCSI bus. If +or too much "traffic" on the SCSI bus. If .I nn is greater than zero, the backend had to wait .I nn @@ -469,21 +469,21 @@ levels reduce verbosity. 1. ADF Mode .RS After several ADF scans, the scanner moves the carriage back to the idle -position and back to ADF scan position, before a scan starts. We do not -know, if this is a problem of the scanner, or if this is a bug of the +position and back to ADF scan position, before a scan starts. We do not +know, if this is a problem of the scanner, or if this is a bug of the backend. At present, the scanner must power off and on to stop this annoying behaviour. .RE 2. Threshold level does not work (only JX-610) .PP -3. The maximum resolution is limited to 600 dpi(JX-610 supported +3. The maximum resolution is limited to 600 dpi(JX-610 supported to 1200 dpi) resp. 400 dpi (JX-250) .PP 4. If the JX250 is used with an ADF, the following situation can occur: After several scans, the scanner moves, after loading a new sheet of paper, the carriage to the idle position, and then back to the position used for ADF -scans. This happens for +scans. This happens for .I every scan, in contrast to the calibration, which is done after 10 scans. (For the diff --git a/doc/sane-sm3600.man b/doc/sane-sm3600.man index 8f58622..7f5c9a4 100644 --- a/doc/sane-sm3600.man +++ b/doc/sane-sm3600.man @@ -8,7 +8,7 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the Toshiba M011 custom USB chip. This backend should be considered alpha. -.PP +.PP There are also backends for Microtek scanners with SCSI command set. Refer to sane\-microtek(5) and sane\-microtek2(5) for details. .PP @@ -79,4 +79,3 @@ Marian Eichholz (eichholz@computer.org) .br Glenn Ramsey (glenn@componic.com) .br - diff --git a/doc/sane-sm3840.man b/doc/sane-sm3840.man index 96959b6..e6af3a1 100644 --- a/doc/sane-sm3840.man +++ b/doc/sane-sm3840.man @@ -8,7 +8,7 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the SCAN08 USB chip. -.PP +.PP There exist backends for Microtek scanners with SCSI command set. Refer to sane\-microtek(5) and sane\-microtek2(5) for details. .PP @@ -92,4 +92,3 @@ sane\-microtek2(5), sane\-sm3600(5), http://www.ziplabel.com/sm3840 .br Earle F. Philhower III (earle@ziplabel.com) .br - diff --git a/doc/sane-snapscan.man b/doc/sane-snapscan.man index 3914868..6e71875 100644 --- a/doc/sane-snapscan.man +++ b/doc/sane-snapscan.man @@ -33,8 +33,8 @@ or .IR /dev/sge , for example. See sane\-scsi(5) for details. .P -For USB scanners the devicename must contain the keyword "usb", as in -.I /dev/usbscanner +For USB scanners the devicename must contain the keyword "usb", as in +.I /dev/usbscanner or .IR /dev/usb/scanner0 . For scanners that need a firmware upload before scanning add a line starting @@ -107,5 +107,5 @@ Mikko Tyolajarvi, David Mosberger-Tang, Wolfgang Goeller, Petter Reinholdtsen, Gary Plewa, Sebastien Sable, Oliver Schwartz and Mikael Magnusson. .br -Man page by Henning Meier-Geinitz (mostly based on the web pages and +Man page by Henning Meier-Geinitz (mostly based on the web pages and source code). diff --git a/doc/sane-st400.man b/doc/sane-st400.man index 9dac97c..affdf72 100644 --- a/doc/sane-st400.man +++ b/doc/sane-st400.man @@ -22,7 +22,7 @@ The Siemens ST/Highscan series includes several more models, e.g. the ST300 and ST600. If you own one of these scanners, or a scanner other than the ones listed above that works with this backend, please let us know by sending the scanner's model name, SCSI ID, and firmware revision to -.IR sane\-devel@lists.alioth.debian.org . +.IR sane\-devel@alioth-lists.debian.net . Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. @@ -139,7 +139,7 @@ me the report. .SH "SEE ALSO" sane(7), sane\-scsi(5) .br -http://www.informatik.uni-oldenburg.de/~ingo/sane/ +http://www.informatik.uni-oldenburg.de/~ingo/sane/ .SH AUTHOR diff --git a/doc/sane-stv680.man b/doc/sane-stv680.man index 7b63b92..90cdf53 100644 --- a/doc/sane-stv680.man +++ b/doc/sane-stv680.man @@ -32,7 +32,7 @@ for the exact status of each camera. For startup of this backend check that if present the stv680 kernel module is removed or disabled. .br -Also before using, enable the backend by editing the /etc/sane.d/dll.conf file, +Also before using, enable the backend by editing the /etc/sane.d/dll.conf file, change #stv680 to stv680. For problems with the untested cameras, you @@ -62,7 +62,7 @@ If you have any success with a camera not listed here, or if you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d stv680 .RE @@ -75,7 +75,7 @@ scanimage \-\-help \-d stv680 .B \-\-mode selects the basic mode of operation of the webcams valid choices. -The read resolution mode is 8 bits, output resolution is 24 bits. +The read resolution mode is 8 bits, output resolution is 24 bits. Selects the resolution for a scan. The camera can do only the resolutions listed. .TP @@ -98,7 +98,7 @@ Bayer unshuffle, color correction, textline with date and time is added .TP .B \-\-white\-level\-r Selects what red radiance level should be -considered "white", when scanning some sheets by changing the calibration +considered "white", when scanning some sheets by changing the calibration value loaded into the scanner. Scale \-32 .. 0 .. +32 in steps of 1. .TP @@ -173,4 +173,3 @@ STV680 kernel module pencam2 program .br libghoto2 program (camlib stv0680) - diff --git a/doc/sane-tamarack.man b/doc/sane-tamarack.man index 628069c..7084924 100644 --- a/doc/sane-tamarack.man +++ b/doc/sane-tamarack.man @@ -28,8 +28,8 @@ Where .I special is the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI device or a -symlink to such a device. The program -.IR sane\-find\-scanner +symlink to such a device. The program +.IR sane\-find\-scanner helps to find out the correct device. Under Linux, such a device name could be .I /dev/sga @@ -69,9 +69,9 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_TAMARACK If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_TAMARACK=4 .SH "SEE ALSO" diff --git a/doc/sane-teco1.man b/doc/sane-teco1.man index acb4985..4f4ce85 100644 --- a/doc/sane-teco1.man +++ b/doc/sane-teco1.man @@ -20,21 +20,21 @@ The scanners that should work with this backend are: .nf Vendor Model TECO model status ---------------------- -------------- ----------- - Relisys AVEC 2400 VM3520 tested + Relisys AVEC 2400 VM3520 tested Relisys AVEC 2412 VM3520+ tested - Relisys AVEC 4800 VM4530 untested - Relisys AVEC 4816 VM4530+ untested - Relisys RELI 2400 VM3530 untested + Relisys AVEC 4800 VM4530 untested + Relisys AVEC 4816 VM4530+ untested + Relisys RELI 2400 VM3530 untested Relisys RELI 2412 VM3530+ tested - Relisys RELI 2412 VM3530+ untested - Relisys RELI 4816 VM4540 tested + Relisys RELI 2412 VM3530+ untested + Relisys RELI 4816 VM4540 tested Relisys RELI 4830 VM4542 tested - Relisys RELI 9600 VM6530 untested - Relisys RELI 9612 VM6530* untested - Relisys RELI 9624 VM6530+ untested - Relisys RELI 9630 VM6540 untested - Relisys RELI DS15 VM3440 untested - Relisys RELI DS6 VM3420 untested + Relisys RELI 9600 VM6530 untested + Relisys RELI 9612 VM6530* untested + Relisys RELI 9624 VM6530+ untested + Relisys RELI 9630 VM6540 untested + Relisys RELI DS15 VM3440 untested + Relisys RELI DS6 VM3420 untested Dextra DF-600P VM3510 tested Dextra DF-4830T VM4542 untested Dextra DF-1200T+ VM3530+ untested @@ -59,7 +59,7 @@ If you have any success with a scanner not listed here, or if you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d teco1 .RE @@ -69,7 +69,7 @@ scanimage \-\-help \-d teco1 .TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .I Black & White , .I Grayscale @@ -89,7 +89,7 @@ between 1 and 600, in increments of 1. .B Geometry options .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters by default. @@ -103,24 +103,24 @@ area. All parameters are specified in millimeters by default. (color mode only) allows the user to specify a gamma table (see the next 3 parameters). -.TP -.B \-\-red\-gamma\-table +.TP +.B \-\-red\-gamma\-table (color mode only) can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. -.TP -.B \-\-green\-gamma\-table +.TP +.B \-\-green\-gamma\-table (color mode only) can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. .TP -.B \-\-blue\-gamma\-table +.B \-\-blue\-gamma\-table (color mode only) can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. .TP .B \-\-dither -(Black & White only) select the dither mask to use. Possible values are +(Black & White only) select the dither mask to use. Possible values are .I Line art , .I 2x2 @@ -140,7 +140,7 @@ and .I 8x8 vertical -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 22 dpi and the scan area is the maximum allowed. The scan mode is user diff --git a/doc/sane-teco2.man b/doc/sane-teco2.man index 3abd3b8..4b79960 100644 --- a/doc/sane-teco2.man +++ b/doc/sane-teco2.man @@ -45,7 +45,7 @@ Note that the untested scanner will not be directly supported. You should contact the author for that. The TECO VM number can usually be found at the back of the -scanner. It is also part of the FCC ID. +scanner. It is also part of the FCC ID. The options the backend supports can either be selected through command line options to programs like scanimage or through GUI @@ -56,7 +56,7 @@ If you have any success with a scanner not listed here, or if you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d teco2 .RE @@ -66,7 +66,7 @@ scanimage \-\-help \-d teco2 .TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .I Lineart , .I Gray @@ -84,21 +84,21 @@ between 1 and 600, in increments of 1. Color -selects the resolution for a scan. The scanner can do only the +selects the resolution for a scan. The scanner can do only the resolutions listed. -All values with ydpi > 300 (300 x 600) or 600 (600 x 1200) result in -a wrong proportion for the scan. The proportion can be adjusted with -the following imagemagick command: -convert \-geometry (dpi/max_xdpi * 100%)x100% -max_xdpi is for the vm3575 constant with 300 dpi -e.g. 600dpi adjust with: convert \-geometry 200%x100% +All values with ydpi > 300 (300 x 600) or 600 (600 x 1200) result in +a wrong proportion for the scan. The proportion can be adjusted with +the following imagemagick command: +convert \-geometry (dpi/max_xdpi * 100%)x100% +max_xdpi is for the vm3575 constant with 300 dpi +e.g. 600dpi adjust with: convert \-geometry 200%x100% .TP .B Geometry options .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters by default. @@ -112,25 +112,25 @@ area. All parameters are specified in millimeters by default. (color mode only) allows the user to specify a gamma table (see the next 3 parameters). -.TP -.B \-\-red\-gamma\-table +.TP +.B \-\-red\-gamma\-table (color mode only) can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. -.TP -.B \-\-green\-gamma\-table +.TP +.B \-\-green\-gamma\-table (color mode only) can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. .TP -.B \-\-blue\-gamma\-table +.B \-\-blue\-gamma\-table (color mode only) can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. .TP .B \-\-white\-level\-r (VM3564, VM356A, VM3575 and VM6575 only) Selects what red radiance level should be -considered "white", when scanning some sheets by changing the calibration +considered "white", when scanning some sheets by changing the calibration value loaded into the scanner. Scale 0..64 in steps of 1. .TP @@ -145,10 +145,10 @@ value loaded into the scanner. Scale 0..64 in steps of 1. considered "white", when scanning some sheets by changing the calibration value loaded into the scanner. Scale 0..64 in steps of 1. -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 50 dpi -(for VM356A and VM6575 75 dpi) and the scan area is the maximum allowed. +(for VM356A and VM6575 75 dpi) and the scan area is the maximum allowed. The scan mode is user selected. The default is "no". diff --git a/doc/sane-teco3.man b/doc/sane-teco3.man index a2b041d..8fc6c3c 100644 --- a/doc/sane-teco3.man +++ b/doc/sane-teco3.man @@ -31,7 +31,7 @@ The scanners that should work with this backend are: .RE The TECO VM number can usually be found at the back of the -scanner. It is also part of the FCC ID. +scanner. It is also part of the FCC ID. The options the backend supports can either be selected through command line options to programs like scanimage or through GUI @@ -42,7 +42,7 @@ If you have any success with a scanner not listed here, or if you have any strange behavior, please report to the backend maintainer or to the SANE mailing list. -Valid command line options and their syntax can be listed by using +Valid command line options and their syntax can be listed by using .RS scanimage \-\-help \-d teco3 .RE @@ -52,7 +52,7 @@ scanimage \-\-help \-d teco3 .TP .B \-\-mode -selects the basic mode of operation of the scanner valid choices are +selects the basic mode of operation of the scanner valid choices are .I Black & White , .I Grayscale @@ -72,7 +72,7 @@ between 1 and 1200, in increments of 1. .B Geometry options .TP -.B \-l \-t \-x \-y +.B \-l \-t \-x \-y control the scan area: \-l sets the top left x coordinate, \-t the top left y coordinate, \-x selects the width and \-y the height of the scan area. All parameters are specified in millimeters by default. @@ -86,23 +86,23 @@ area. All parameters are specified in millimeters by default. (color mode only) allows the user to specify a gamma table (see the next 3 parameters). -.TP -.B \-\-red\-gamma\-table +.TP +.B \-\-red\-gamma\-table (color mode only) can be used to download a user defined gamma table for the red channel. The table must be 1024 bytes long. -.TP -.B \-\-green\-gamma\-table +.TP +.B \-\-green\-gamma\-table (color mode only) can be used to download a user defined gamma table for the green channel. The table must be 1024 bytes long. .TP -.B \-\-blue\-gamma\-table +.B \-\-blue\-gamma\-table (color mode only) can be used to download a user defined gamma table for the blue channel. The table must be 1024 bytes long. -.TP +.TP .B \-\-preview requests a preview scan. The resolution used for that scan is 22 dpi and the scan area is the maximum allowed. The scan mode is user diff --git a/doc/sane-test.man b/doc/sane-test.man index e582895..08c9f86 100644 --- a/doc/sane-test.man +++ b/doc/sane-test.man @@ -15,10 +15,10 @@ The idea is not only to find bugs in frontends but also to show all capabilities of SANE. Therefore .B sane\-test implements functions and options that are not (or seldom) found in other -backends. +backends. .PP The backend is commented out in @CONFIGDIR@/dll.conf, so either the comment -character must be removed or the backend must be called explicitly. E.g. +character must be removed or the backend must be called explicitly. E.g. `scanimage \-d test' or `xscanimage test'. .SH SCAN MODE OPTIONS @@ -86,7 +86,7 @@ If option is set, the maximum amount of data transferred with each call to sane_read() is limited. .PP -Option +Option .B read\-limit\-size sets the limit for option read-limit. A low limit slows down scanning. It can be used to detect errors in frontend that occur because of wrong @@ -198,7 +198,7 @@ backend. .PP .SH INT TEST OPTIONS -There are 6 int test options in total. +There are 6 int test options in total. .PP Option .B int @@ -229,7 +229,7 @@ Option constraint. .SH FIXED TEST OPTIONS -There are 3 fixed test options in total. +There are 3 fixed test options in total. .PP Option .B fixed @@ -246,7 +246,7 @@ Option .PP .SH STRING TEST OPTIONS -There are 3 string test options in total. +There are 3 string test options in total. .PP Option .B string @@ -276,7 +276,7 @@ The backend configuration file (see also description of below). The initial values of most of the basic SANE options can be configured in this file. A template containing all the default values is provided together with this backend. One of the more interesting values may be -.BR number_of_devices . +.BR number_of_devices . It can be used to check the frontend's ability to show a long list of devices. The config values concerning resolution and geometry can be useful to test the handling of big file sizes. @@ -307,13 +307,13 @@ to "/tmp/config:" would result in directories "tmp/config", ".", and .B SANE_DEBUG_TEST If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_TEST=4 .SH "SEE ALSO" -sane(7), +sane(7), .IR http://www.meier\-geinitz.de/sane/test\-backend/ diff --git a/doc/sane-u12.man b/doc/sane-u12.man index 8b35fdf..680ce0c 100644 --- a/doc/sane-u12.man +++ b/doc/sane-u12.man @@ -150,8 +150,6 @@ export SANE_DEBUG_U12=10 .BR sane\-plustek (5), .br .I @DOCDIR@/u12/U12.changes -.br -.I http://www.gjaeger.de/scanner/u12/ .SH "CONTACT AND BUG-REPORTS" Please send any information and bug-reports to: @@ -164,10 +162,6 @@ Mailing-List archive at: .br .B http://www.sane\-project.org/mailing\-lists.html .PP -or directly from the projects' homepage at: -.br -.B http://www.gjaeger.de/scanner/u12/ -.PP To obtain debug messages from the backend, please set the environment-variable .I SANE_DEBUG_U12 @@ -180,5 +174,5 @@ The value controls the verbosity of the backend. .SH "KNOWN BUGS & RESTRICTIONS" * The driver is in alpha state, so please don't expect too much!!! .PP -* When using libusb, it might be, that the backend hangs. +* When using libusb, it might be, that the backend hangs. In that case, reconnect the scanner. diff --git a/doc/sane-umax.man b/doc/sane-umax.man index 7dd9382..41b4beb 100644 --- a/doc/sane-umax.man +++ b/doc/sane-umax.man @@ -20,12 +20,12 @@ parallel- and USB-scanners are not (and probably will never be) supported! .SH CONFIGURATION -The configuration file for this backend resides in +The configuration file for this backend resides in .IR @CONFIGDIR@/umax.conf . Its contents is a list of device names that correspond to UMAX and UMAX compatible scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is -shown below: +shown below: .nf # this is a comment @@ -44,19 +44,19 @@ shown below: option calibration\-width\-offset \-1 option calibration\-bytes\-pixel \-1 option exposure\-time\-rgb\-bind \-1 - option invert\-shading\-data \-1 + option invert\-shading\-data \-1 option lamp\-control\-available 0 option gamma\-lsb\-padded 0 - /dev/sge -\ - #scsi Vendor Model Type Bus Channel ID LUN + /dev/sge +\ + #scsi Vendor Model Type Bus Channel ID LUN # The following scanner supports lamp control option lamp\-control\-available 1 - scsi UMAX * Scanner * * * * * -\ + scsi UMAX * Scanner * * * * * +\ # scanner on /dev/scanner does not support lamp control option lamp\-control\-available 0 - /dev/scanner + /dev/scanner .fi .TP @@ -194,7 +194,7 @@ command queueing you can try to set this value to 1. .PP The special device name must be a generic SCSI device or a symlink to such a device. To find out to which device your scanner is assigned and how you have to set the -permissions of that device, have a look at sane\-scsi. +permissions of that device, have a look at sane\-scsi. .SH SCSI ADAPTER TIPS @@ -203,7 +203,7 @@ well by Linux (I suggest not to use it), the PCI-SCSI-adapters that come with so Umax-scanners are not supported at all (as far as I know). On other platforms these SCSI-adapters are not supported. So you typically need to purchase another SCSI-adapter that is supported by your platform. See the relevant hardware FAQs and HOWTOs for your -platform for more information. +platform for more information. The UMAX-scanners do block the scsi-bus for a few seconds while scanning. It is not necessary to connect the scanner to its own SCSI-adapter. But if you need short @@ -240,7 +240,7 @@ SANE_DEBUG_UMAX values .ft CR .nf Number Remark -\ +\ 0 print important errors (printed each time) 1 print errors 2 print sense diff --git a/doc/sane-umax1220u.man b/doc/sane-umax1220u.man index e90a4e9..a83db59 100644 --- a/doc/sane-umax1220u.man +++ b/doc/sane-umax1220u.man @@ -18,7 +18,7 @@ For more information on this backend, please visit This backend is also able to drive the UMAX Astra 1600U/2000U/2100U. The 2100U is confirmed to work. For the other scanners no reports have been received yet. Please contact us and tell us if your scanner works -(sane\-devel@lists.alioth.debian.org). +(sane\-devel@alioth-lists.debian.net). .SH CONFIGURATION @@ -27,13 +27,13 @@ Usually, no manual configuration is necessary. The configuration file for this b Its contents is a list of device names that correspond to UMAX Astra scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample -configuration file is shown below: +configuration file is shown below: .nf #usb vendor product usb 0x1606 0x0010 # Device list for non-linux systems - /dev/scanner + /dev/scanner /dev/usb/scanner0 .fi @@ -66,7 +66,7 @@ SANE_DEBUG_UMAX1220U values .ft CR .nf Number Remark -\ +\ 1 print failures 2 print information 3 print high-level function calls @@ -106,7 +106,7 @@ sane(7), sane\-usb(5) Marcio Luis Teixeira <marciot@users.sourceforge.net> .SH EMAIL-CONTACT -sane\-devel@lists.alioth.debian.org +sane\-devel@alioth-lists.debian.net .SH REPORTING BUGS diff --git a/doc/sane-umax_pp.man b/doc/sane-umax_pp.man index 09e6ea0..40972ce 100644 --- a/doc/sane-umax_pp.man +++ b/doc/sane-umax_pp.man @@ -8,52 +8,52 @@ The library implements a SANE (Scanner Access Now Easy) backend that provides access to Umax parallel port flatbed scanners. The following scanners work with this backend: -.PP +.PP .RS -Model: -.br -\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- -.br -Astra 610P -.br -Astra 1220P -.br -HP3200C -.br -Astra 1600P -.br -Astra 2000P -.br +Model: +.br +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- +.br +Astra 610P +.br +Astra 1220P +.br +HP3200C +.br +Astra 1600P +.br +Astra 2000P +.br Genius ColorPage-Life Pro -.br +.br .RE -.PP +.PP This backend handles 75x75, 150x150, 300x300, 600x600 and 600x1200 for 1220P/1600P/2000P -dpi scan resolutions, and 75x75, 150x150, 300x300 and 300x600 for 610P. In color and gray +dpi scan resolutions, and 75x75, 150x150, 300x300 and 300x600 for 610P. In color and gray levels, there is a software lineart mode. -.PP -The new generation models share a newer version of the 610P ASIC embedded in an EPAT chip. +.PP +The new generation models share a newer version of the 610P ASIC embedded in an EPAT chip. Only parts such as CCD and ADC change from one to another. They even all reports being UMAX Astra 1220P via IEEE1284. There isn't software way to recognize them properly. Under windows, model is -set by the driver installed, regardless of the hardware. -.PP -.TP +set by the driver installed, regardless of the hardware. +.PP +.TP .B EPP/ECP MODES ONLY -The current version of the backend uses only EPP or ECP mode to communicate -with the scanner. PS/2 mode isn't implemented. The 610P only use SPP. It is -recommended that you set your parallel port to EPP in BIOS with the current -version of this +The current version of the backend uses only EPP or ECP mode to communicate +with the scanner. PS/2 mode isn't implemented. The 610P only use SPP. It is +recommended that you set your parallel port to EPP in BIOS with the current +version of this backend. You can leave it to ECP or ECP+EPP, but in this case you may not use ppdev but only direct hardware access if you have to use ECP. ECPEPP will only work if you use a 2.4 or 2.6 kernel with ppdev character device support. -.PP -This backend does support parport sharing only -.I +.PP +This backend does support parport sharing only +.I if you have a kernel with ppdev support. -.I -.PP -Note that if you don't use the ppdev character device, the backend +.I +.PP +Note that if you don't use the ppdev character device, the backend needs to run as root. To allow user access to the scanner run the backend through the network interface (See saned(8) and sane\-net(5)). A more relaxed solution (security wise) is to add suid bit to the frontend @@ -63,13 +63,13 @@ access to IO ports, which lessen risks when being root. .SH "DEVICE NAMES" This backend expects device names of the form: -.PP +.PP .RS .I port value .RE -.PP +.PP Where -\fBvalue\fR is : +\fBvalue\fR is : .RS .TP @@ -95,40 +95,40 @@ have to use /dev/parport1, /dev/parport2, ... 0x378 does direct hardware access on the given address. Usual values are 0x378, 0x278, 0x3BC -In this case, you have to run the scanner as +In this case, you have to run the scanner as root (*BSD and linux), or with 'IOPL=yes' on OS/2 -.PP +.PP .RE \fBNOTE:\fR in all cases, you must have sufficient privileges to get access to the chosen device or address. Depending on the security settings, devices may not be available for all users. -You have to change permissions on the dev/ppi* or /dev/parport* devices. -.PP +You have to change permissions on the dev/ppi* or /dev/parport* devices. +.PP .RE You can rename any device using the -.PP +.PP .RS .I name devname -.br +.br .I model model -.br +.br .I vendor vendor .RE -.PP -options. These options apply to the last port option. +.PP +options. These options apply to the last port option. .SH "CONFIGURATION" Please make sure to edit umax_pp.conf .B before you use the backend. -.PP +.PP The contents of the .B umax_pp.conf file is a list of options and device names that correspond to Umax scanners. Empty lines and lines starting with a hash mark (#) are ignored. -.PP +.PP The eight options supported are .BR red\-gain , .BR green\-gain , @@ -151,7 +151,7 @@ range from 0 (lowest gain) to 15 (highest). If the advanced option "Gain" isn't checked in the frontend, the backend does automatic gain calibration, and do not use user provided values. -.PP +.PP Options .B red\-offset @@ -160,21 +160,21 @@ Options and .B blue\-offset allow you to adjust the offset of your scanner for the given color. Values -range from 0 (lowest offset) to 15 (highest). -.PP +range from 0 (lowest offset) to 15 (highest). +.PP Option .B astra allows you to change the model of your scanner. Current auto detection is based on side effects on scanning when using 1220P command set on other models, so -it may fail on unknown hardware combination. Valid values are 610, 1220, 1600 +it may fail on unknown hardware combination. Valid values are 610, 1220, 1600 and 2000. It is useful only when autodetection fails to detect properly -your scanner model. If your scanner work properly but is reported wrongly, -let it be that way. -The only valid case to change the model is when your scanner produces "black" or -"inverted" scans. In this case you can put the model. Be aware that it will +your scanner model. If your scanner work properly but is reported wrongly, +let it be that way. +The only valid case to change the model is when your scanner produces "black" or +"inverted" scans. In this case you can put the model. Be aware that it will prevent scanner model autodetection. -.PP +.PP Option .B buffer @@ -183,26 +183,26 @@ bytes. The default value is 2 megabytes. Decreasing this value will improve the smoothness of progress bar in the frontend, but will stall the scan more often. -.PP +.PP .SH "FILES" -.TP +.TP .I @CONFIGDIR@/umax_pp.conf The backend configuration file (see also description of .B SANE_CONFIG_DIR below). -.TP +.TP .I @LIBDIR@/libsane\-umax_pp.a The static library implementing this backend. -.TP +.TP .I @LIBDIR@/libsane\-umax_pp.so The shared library implementing this backend (present on systems that support dynamic loading). .SH "ENVIRONMENT" -.TP +.TP .B SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are @@ -216,14 +216,14 @@ directories. For example, setting .B SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "@CONFIGDIR@" being searched (in this order). -.TP +.TP .B SANE_DEBUG_UMAX_PP If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. -.PP +.PP .RS .ft CR .nf @@ -239,14 +239,14 @@ level debug output .fi .ft R .RE -.PP -.TP +.PP +.TP .B SANE_DEBUG_UMAX_PP_LOW This variable sets the debug level for the SANE interface for the Umax ASIC. Note that enabling this will spam your terminal with some million lines of debug output. -.PP +.PP .RS .ft CR .nf @@ -256,18 +256,18 @@ level debug output 1 errors 8 command blocks 16 detailed code flow - 32 dump datafiles + 32 dump datafiles 255 everything .fi .ft R .RE -.PP - -.PP +.PP + +.PP .SH "SEE ALSO" sane(7), sane\-net(5), saned(8) -.TP +.TP For latest bug fixes and information see .I http://umax1220p.sourceforge.net/ @@ -282,21 +282,21 @@ by William Stuart. If something doesn't work, please contact me. But I need some information about your scanner to be able to help you... -.TP +.TP .I SANE version run "scanimage \-V" to determine this -.TP +.TP .I the backend version and your scanner hardware run "SANE_DEBUG_UMAX_PP=255 scanimage \-L 2>log" as root. If you don't get any output from the umax_pp backend, make sure a line "umax_pp" is included into your @CONFIGDIR@/dll.conf. If your scanner isn't detected, make sure you've defined the right port address, or the -correct device +correct device in your umax_pp.conf. -.TP +.TP .I the name of your scanner/vendor also a worthy information. Please also include the optical resolution and lamp type of your scanner, both can be found in the manual of your scanner. -.TP +.TP .I any further comments if you have comments about the documentation (what could be done better), or you think I should know something, please include it. diff --git a/doc/sane-usb.man b/doc/sane-usb.man index 8237a8a..cb65c7f 100644 --- a/doc/sane-usb.man +++ b/doc/sane-usb.man @@ -12,7 +12,7 @@ sanei_usb interface. However, there is one exceptions: USB Scanners supported by the microtek2 backend need a special USB kernel driver, see .BR sane\-microtek2 (5) -for details. +for details. .SH "QUICK START" This is a short HOWTO-like section. For the full details, read the following @@ -71,11 +71,11 @@ Usually udev or for older distributions the hotplug utilities are used, which support dynamic setting of access permissions. SANE comes with udev and hotplug scripts in the directory tools/udev and tools/hotplug. They can be used for setting permissions, see @DOCDIR@/README.linux, tools/README and the README in -the tools/hotplug directory for more details. +the tools/hotplug directory for more details. .PP For the .BR BSDs , -the device files used by libusb are named +the device files used by libusb are named .IR /dev/ugen* . Use chmod to apply appropriate permissions. @@ -114,7 +114,7 @@ usb 0x055f 0x0006 .PP would have the effect that all USB devices in the system with a vendor id of 0x55f and a product id of 0x0006 would be probed and recognized by the -backend. +backend. .PP If your scanner is not detected automatically, it may be necessary to edit the appropriate backend configuration file before using SANE for the first time. @@ -138,6 +138,13 @@ environment variable controls the debug level for the USB I/O subsystem. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. Values greater than 4 enable libusb debugging (if available). Example: export SANE_DEBUG_SANEI_USB=4. +.PP +.TP +.B SANE_USB_WORKAROUND +If your scanner does not work when plugged into a USB3 port, try +setting the environment variable SANE_USB_WORKAROUND to 1. This +may work around issues which happen with particular kernel +versions. Example: export SANE_USB_WORKAROUND=1. .SH "SEE ALSO" .BR sane (7), diff --git a/doc/sane-v4l.man b/doc/sane-v4l.man index c0cae22..5af92ce 100644 --- a/doc/sane-v4l.man +++ b/doc/sane-v4l.man @@ -83,7 +83,7 @@ Juergen G. Schimmer, Henning Meier-Geinitz If more than one video card is present, a crash may occur. Frequency and geometry selection is missing. .br -Send bug reports to the SANE mailing list: sane\-devel@lists.alioth.debian.org. You must +Send bug reports to the SANE mailing list: sane\-devel@alioth-lists.debian.net. You must be subscribed to the list to send mail. See http://www.sane\-project.org/mailing\-lists.html for details. diff --git a/doc/sane-xerox_mfp.man b/doc/sane-xerox_mfp.man index 0ffa3e8..c03ddd4 100644 --- a/doc/sane-xerox_mfp.man +++ b/doc/sane-xerox_mfp.man @@ -20,7 +20,7 @@ For SCX\-4500W in network mode you need to specify .B tcp host_address [port] .RE .PP -The +The .B host_address is passed through resolver, thus can be a dotted quad or a name from /etc/hosts or resolvable through DNS. .SH FILES @@ -39,9 +39,9 @@ support dynamic loading). .B SANE_DEBUG_XEROX_MFP If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher -debug levels increase the verbosity of the output. +debug levels increase the verbosity of the output. -Example: +Example: export SANE_DEBUG_XEROX_MFP=4 .SH LIMITATIONS @@ -49,7 +49,7 @@ Multicast autoconfiguration for LAN scanners is not implemented yet. IPv6 addres .SH BUGS AND SUPPORT If you have found a bug or need support please follow open\-source way of acquiring support via -mail\-lists http://www.sane\-project.org/mailing\-lists.html or SANE bug tracker +mail\-lists http://www.sane\-project.org/mailing\-lists.html or SANE bug tracker http://www.sane\-project.org/bugs.html .SH AUTHORS @@ -65,4 +65,3 @@ Laxmeesh Onkar Markod <m.laxmeesh@samsung.com> .BR sane (7), .BR sane\-usb (5) .br - diff --git a/doc/sane.man b/doc/sane.man index 3eadf42..070a993 100644 --- a/doc/sane.man +++ b/doc/sane.man @@ -1,4 +1,4 @@ -.TH sane 7 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.TH sane 7 "03 Jan 2020" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" .IX sane .SH NAME @@ -24,33 +24,33 @@ If you have trouble getting your scanner detected, read the PROBLEMS section. .SH TERMINOLOGY -An application that uses the +An application that uses the .B SANE -interface is called a +interface is called a .B SANE frontend. -A driver that implements the +A driver that implements the .B SANE interface is called a .B SANE backend. -A +A .B meta backend provides some means to manage one or more other backends. .SH "SOFTWARE PACKAGES" -The package +The package .RB ` sane\-backends ' -contains a lot of backends, documentation (including the +contains a lot of backends, documentation (including the .B SANE -standard), networking support, and the command line frontend +standard), networking support, and the command line frontend .RB ` scanimage '. -The frontends +The frontends .RB ` xscanimage "', `" xcam "', and `" scanadf ' are included in the package -.RB ` sane\-frontends '. +.RB ` sane\-frontends '. Both packages can be downloaded from the .B SANE -homepage +homepage .RI ( http://www.sane\-project.org/ ). Information about other frontends and backends can also be found on the .B SANE @@ -60,15 +60,15 @@ homepage. The following sections provide short descriptions and links to more information about several aspects of .B SANE. -A name with a number in parenthesis (e.g. +A name with a number in parenthesis (e.g. .RB ` sane\-dll (5)') -points to a manual page. In this case +points to a manual page. In this case .RB ` "man 5 sane\-dll" ' will display the page. Entries like .RI ` @DOCDIR@/sane.tex ' are references to text files that were copied to the .B SANE -documentation directory +documentation directory .RI ( @DOCDIR@/ ) during installation. Everything else is a URL to a resource on the web. @@ -79,9 +79,9 @@ can be found on the SANE homepage: .IR http://www.sane\-project.org/ . .TP .B SANE device lists -The +The .B SANE -device lists contain information about the status of +device lists contain information about the status of .B SANE support for a specific device. If your scanner is not listed there (either supported or unsupported), please contact us. See section HOW CAN YOU HELP @@ -100,9 +100,9 @@ unsubscribe: .TP .B SANE IRC channel The IRC (Internet Relay Chat) channel #sane can be found on the Freenode -network (irc.freenode.net). It's for discussing +network (irc.freenode.net). It's for discussing .B SANE -problems, talking about development and general +problems, talking about development and general .B SANE related chatting. Before asking for help, please read the other documentation mentioned in this manual page. The channel's topic is also used for @@ -127,13 +127,13 @@ For information about USB configuration see .SH "FRONTENDS AND MISCELLANEOUS PROGRAMS" .TP 2 .B scanimage -Command-line frontend. See +Command-line frontend. See .BR scanimage (1). .TP .B saned .B SANE network daemon that allows remote clients to access image acquisition devices -available on the local host. See +available on the local host. See .BR saned (8). .TP .B sane\-find\-scanner @@ -192,7 +192,7 @@ This backend supports several Avision based scanners. This includes the original Avision scanners (like AV 630, AV 620, ...) as well as the HP ScanJet 53xx and 74xx series, Fujitsu ScanPartner, some Mitsubishi and Minolta film-scanners. -See +See .BR sane\-avision (5) for details. .TP @@ -225,7 +225,7 @@ parallel port scanners. See for details. .TP .B cardscan -This backend provides support for Corex Cardscan USB scanners. See +This backend provides support for Corex Cardscan USB scanners. See .BR sane\-cardscan (5) for details. .TP @@ -238,8 +238,6 @@ for details. This is a SANE backend for Nikon Coolscan film-scanners. See .BR sane\-coolscan2 (5) -or -.I http://coolscan2.sourceforge.net for details. .TP .B epjitsu @@ -260,7 +258,7 @@ and adf scanners. See for details. .TP .B genesys -The genesys backend provides support for several scanners based on the Genesys Logic +The genesys backend provides support for several scanners based on the Genesys Logic GL646, GL841, GL843, GL847 and GL124 chips like the Medion 6471 and Hewlett-Packard 2300c. See .BR sane\-genesys (5) @@ -363,7 +361,7 @@ for details. .TP .B microtek The microtek backend provides access to the "second generation" Microtek -scanners with SCSI-1 command set. See +scanners with SCSI-1 command set. See .BR sane\-microtek (5) for details. .TP @@ -421,10 +419,10 @@ SCSI flatbed scanners. See for details. .TP .B pixma -The pixma backend supports Canon PIXMA MP series (multi-function devices). See +The pixma backend supports Canon PIXMA MP series (multi-function devices), +Canon imageCLASS series (laser devices), Canon MAXIFY series and some Canon +CanoScan series. See .BR sane\-pixma (5) -or -.I http://home.arcor.de/wittawat/pixma/ for details. .TP .B plustek @@ -448,6 +446,12 @@ scanners: IS50 and IS60. See .BR sane\-ricoh (5) for details. .TP +.B ricoh2 +The ricoh2 backend provides access to the following Ricoh flatbed +scanners: SG-3100SNw, SP-100SU, and SP-111SU. See +.BR sane\-ricoh2 (5) +for details. +.TP .B s9036 The s9036 backend provides access to Siemens 9036 flatbed scanners. See .BR sane\-s9036 (5) @@ -515,7 +519,7 @@ for details. .TP .B umax_pp The sane\-umax_pp backend provides access to Umax parallel port flatbed scanners -and the HP 3200C. See +and the HP 3200C. See .BR sane\-umax_pp (5) for details. .TP @@ -565,12 +569,12 @@ backend. See .BR sane\-gphoto2 (5). .TP .B qcam -Backend for Connectix QuickCam cameras. See +Backend for Connectix QuickCam cameras. See .BR sane\-qcam (5). .TP .B stv680 -The sane\-st680 backend provides access to webcams with a stv680 chip. See -.BR sane\-st680 (5) +The sane\-stv680 backend provides access to webcams with a stv680 chip. See +.BR sane\-stv680 (5) for details. .PP Also, have a look at the backend information page at @@ -589,7 +593,7 @@ backends by dynamic loading. See .BR sane\-dll (5). .TP .B net -The +The .B SANE network daemon saned provides access to scanners located on different computers in connection with the net backend. See @@ -634,9 +638,9 @@ and the list of projects in .IR @DOCDIR@/PROJECTS . .SH "CHANGING THE TOP-LEVEL BACKEND" -By default, all +By default, all .B SANE -backends (drivers) are loaded dynamically by the +backends (drivers) are loaded dynamically by the .B sane\-dll meta backend. If you have any questions about the dynamic loading, read @@ -655,8 +659,8 @@ It's not hard to write a backend. It can take some time, however. You should have basic knowledge of C and enough patience to work through the documentation and find out how your scanner works. Appended is a list of some documents that help to write backends -and frontends. -.PP +and frontends. +.PP The .B SANE standard defines the application programming interface (API) that is used to @@ -685,7 +689,7 @@ for projects that are planned or not yet included into the distribution and at our bug-tracking system: .IR http://www.http://www.sane\-project.org/bugs.html . .PP -There are some links on how to find out about the protocol of a scanner: +There are some links on how to find out about the protocol of a scanner: .IR http://www.meier\-geinitz.de/sane/misc/develop.html . .PP @@ -731,9 +735,9 @@ If your scanner (or other device) is not connected over the SCSI bus or USB, read the backend's manual page for details on how to set it up. .PP -Now your scanner is detected by the operating system but not by +Now your scanner is detected by the operating system but not by .BR SANE ? -Try +Try .BR "scanimage \-L" . If the scanner is not found, check that the backend's name is mentioned in .IR @CONFIGDIR@/dll.conf . @@ -741,7 +745,7 @@ Some backends are commented out by default. Remove the comment sign for your backend in this case. Also some backends aren't compiled at all if one of their prerequisites are missing. Examples include dc210, dc240, canon_pp, hpsj5s, gphoto2, pint, qcam, v4l, net, sm3600, snapscan, pnm. If you need one of these -backends and they aren't available, read the build instructions in the +backends and they aren't available, read the build instructions in the .B README file and the individual manual pages of the backends. .PP @@ -761,7 +765,7 @@ debugging. The environment variables are documented in the relevant manual pages. For example, to get the maximum amount of debug information when testing a Mustek SCSI scanner, set environment variables .BR SANE_DEBUG_DLL ", " SANE_DEBUG_MUSTEK ", and " SANE_DEBUG_SANEI_SCSI -to 128 and then invoke +to 128 and then invoke .B scanimage .B \-L . The debug messages for the dll backend tell if the mustek backend was found @@ -803,11 +807,11 @@ works and you want to use one of the graphical frontends like .BR xscanimage ", or" .B quiteinsane but those frontends don't detect your scanner? One reason may be that you -installed two versions of +installed two versions of .BR SANE . -E.g. the version that was installed by your distribution in +E.g. the version that was installed by your distribution in .I /usr -and one you installed from source in +and one you installed from source in .IR /usr/local/ . Make sure that only one version is installed. Another possible reason is, that your system's dynamic loader can't find the @@ -825,7 +829,7 @@ See also the documentation of the frontends. .SH "HOW CAN YOU HELP SANE" We appreciate any help we can get. Please have a look at our web page about -contributing to +contributing to .BR SANE : .I http://www.sane\-project.org/contrib.html .PP @@ -903,6 +907,7 @@ for details). .BR sane\-pnm (5), .BR sane\-qcam (5), .BR sane\-ricoh (5), +.BR sane\-ricoh2 (5), .BR sane\-s9036 (5), .BR sane\-sceptre (5), .BR sane\-scsi (5), diff --git a/doc/sane.tex b/doc/sane.tex index 4611797..71ff6fc 100644 --- a/doc/sane.tex +++ b/doc/sane.tex @@ -423,7 +423,7 @@ numbers. frontend/backend pair is compatible. The minor version and the build revision are used for informational and bug-fixing purposes only. - + \item[\code{\defn{SANE\_VERSION\_MAJOR}(\var{vc})}:] This macro returns the major version number component of the version code passed in argument \var{vc}. @@ -574,7 +574,7 @@ typedef char SANE_Char; Type \code{\defn{SANE\_String}} represents a text string as a sequence of C \verb|char| values. The end of the sequence is indicated by a -\verb|'\0'| (\defn{NUL}) character. +\verb|'\0'| (\defn{NUL}) character. \begin{quote} \begin{verbatim} typedef SANE_Char *SANE_String; @@ -702,20 +702,20 @@ will be expanded as need arises): \hline \multicolumn{2}{|c|}{\bf \defn{Vendor Strings}} \\ \hline\hline - \code{AGFA} & \code{Microtek} \\ - \code{Abaton} & \code{Minolta} \\ - \code{Acer} & \code{Mitsubishi} \\ - \code{Apple} & \code{Mustek} \\ - \code{Artec} & \code{NEC} \\ - \code{Avision} & \code{Nikon} \\ - \code{CANON} & \code{Plustek} \\ - \code{Connectix} & \code{Polaroid} \\ - \code{Epson} & \code{Relisys} \\ - \code{Fujitsu} & \code{Ricoh} \\ - \code{Hewlett-Packard} & \code{Sharp} \\ - \code{IBM} & \code{Siemens} \\ - \code{Kodak} & \code{Tamarack} \\ - \code{Lexmark} & \code{UMAX} \\ + \code{AGFA} & \code{Microtek} \\ + \code{Abaton} & \code{Minolta} \\ + \code{Acer} & \code{Mitsubishi} \\ + \code{Apple} & \code{Mustek} \\ + \code{Artec} & \code{NEC} \\ + \code{Avision} & \code{Nikon} \\ + \code{CANON} & \code{Plustek} \\ + \code{Connectix} & \code{Polaroid} \\ + \code{Epson} & \code{Relisys} \\ + \code{Fujitsu} & \code{Ricoh} \\ + \code{Hewlett-Packard} & \code{Sharp} \\ + \code{IBM} & \code{Siemens} \\ + \code{Kodak} & \code{Tamarack} \\ + \code{Lexmark} & \code{UMAX} \\ \code{Logitech} & \code{Noname} \\ \hline \end{tabular} @@ -823,29 +823,29 @@ in Table \ref{tab:valuetype}. \hline\hline \code{\defn{SANE\_TYPE\_BOOL}} & 0 & Option value is of type - \verb|SANE_Bool|. \\ + \verb|SANE_Bool|. \\ \code{\defn{SANE\_TYPE\_INT}} & 1 & Option value is of type - \verb|SANE_Int|. \\ + \verb|SANE_Int|. \\ \code{\defn{SANE\_TYPE\_FIXED}}&2 & Option value is of type - \verb|SANE_Fixed|. \\ + \verb|SANE_Fixed|. \\ \code{\defn{SANE\_TYPE\_STRING}}&3 & Option value is of type - \verb|SANE_String|. \\ + \verb|SANE_String|. \\ \code{\defn{SANE\_TYPE\_BUTTON}} & 4 & An option of this type has no value. Instead, setting an option of this type has an option-specific side-effect. For example, a button-typed option could be used by a backend to provide a means to select default values or to the tell an -automatic document feeder to advance to the next sheet of paper. \\ +automatic document feeder to advance to the next sheet of paper. \\ \code{\defn{SANE\_TYPE\_GROUP}} & 5 & An option of this type has no value. This type is used to group logically related options. A group option is in effect up to the point where another group option is encountered (or up to the end of the option list, if there are no other group options). For group options, only members \code{title} and -\code{type} are valid in the option descriptor. \\ +\code{type} are valid in the option descriptor. \\ \hline \end{tabular} @@ -945,14 +945,14 @@ capability bitset: \hline\hline \code{\defn{SANE\_CAP\_SOFT\_SELECT}} & 1 & The option - value can be set by a call to \code{sane\_con\-trol\_opt\-ion()}.\\ + value can be set by a call to \code{sane\_con\-trol\_opt\-ion()}.\\ \code{\defn{SANE\_CAP\_HARD\_SELECT}} & 2 & The option value can be set by user-intervention (e.g., by flipping a switch). The user-interface should prompt the user to execute the appropriate action to set such an option. This capability is mutually exclusive with SANE\_CAP\_SOFT\_SELECT (either one of them can be set, but not both - simultaneously). \\ + simultaneously). \\ \code{\defn{SANE\_CAP\_SOFT\_DETECT}} & 4 & The option value can be detected by software. If @@ -961,23 +961,23 @@ capability bitset: may or may not be set. If this capability is set but neither \code{SANE\_CAP\_SO\-FT\_SEL\-ECT} nor \code{SANE\_CAP\_HA\-RD\_SEL\-ECT} are, then there is no way to control the option. That is, the - option provides read-out of the current value only. \\ + option provides read-out of the current value only. \\ \code{\defn{SANE\_CAP\_EMULATED}} & 8 & If set, this capability indicates that an option is not directly supported by the device and is instead emulated in the backend. A sophisticated frontend may elect to use its own (presumably better) emulation in lieu of an emulated - option. \\ + option. \\ \code{\defn{SANE\_CAP\_AUTOMATIC}} & 16 & If set, this capability indicates that the backend (or the device) is capable to picking a reasonable option value automatically. For such options, it is possible to select automatic operation by calling \code{sane\_control\_option()} - with an action value of \code{SANE\_ACTION\_SET\_AUTO}. \\ + with an action value of \code{SANE\_ACTION\_SET\_AUTO}. \\ \code{\defn{SANE\_CAP\_INACTIVE}} & 32 & If set, this capability indicates that the option is not currently active (e.g., because it's - meaningful only if another option is set to some other value). \\ + meaningful only if another option is set to some other value). \\ \code{\defn{SANE\_CAP\_ADVANCED}} & 64 & If set, this capability indicates that the option should be @@ -985,7 +985,7 @@ capability bitset: displays such options in a less conspicuous way than regular options (e.g., a command line interface may list such options last or a graphical interface may make them available in a seperate ``advanced - settings'' dialog). + settings'' dialog). \\ \hline @@ -1045,7 +1045,7 @@ SANE_Range; specifies the quantization value. If $l$ is the minimum value, $u$ the maximum value and $q$ the (non-zero) quantization of a range, then the legal values are $v=k\cdot q+l$ for all non-negative - integer values of $k$ such that $v<=u$. \\ + integer values of $k$ such that $v<=u$. \\ \code{\defn{SANE\_CONSTRAINT\_WORD\_LIST}} & 2 & This constraint is applicable to integer and fixed-point valued options only. It constrains the @@ -1055,7 +1055,7 @@ SANE_Range; integer (\verb|SANE_Int|) that specifies the length of the list (not counting the length itself). The remaining elements in the list are interpreted according to the type of the option value - (\verb|SANE_TYPE_INT| or \verb|SANE_TYPE_FIXED|). \\ + (\verb|SANE_TYPE_INT| or \verb|SANE_TYPE_FIXED|). \\ \code{\defn{SANE\_CONSTRAINT\_STRING\_LIST}} & 3 & This constraint is applicable to string-valued options only. It constrains the option @@ -1288,7 +1288,7 @@ described in Table~\ref{tab:actions}. \code{\defn{SANE\_ACTION\_SET\_VALUE}} & 1 & Set option value. The option value passed through argument \code{v} may be modified by the - backend if the value cannot be set exactly. \\ + backend if the value cannot be set exactly. \\ \code{\defn{SANE\_ACTION\_SET\_AUTO}} & 2 & Turn on automatic mode. Backend or device will automatically select an appropriate value. This mode @@ -1862,7 +1862,7 @@ regarding these options: \item A frontend must work properly with any or all of these options missing. - + \end{itemize} \input{net.tex} @@ -1873,7 +1873,7 @@ The SANE standard is discussed and evolved via a mailing list. Anybody with email access to the Internet can automatically join and leave the discussion group by sending mail to the following address. \begin{quote}\index{mailing list} -\url{sane-devel-request@lists.alioth.debian.org} +\url{sane-devel-request@alioth-lists.debian.net} \end{quote} To subscribe, send a mail with the body ``\verb|subscribe sane-devel|'' to the above address. diff --git a/doc/saned.man b/doc/saned.man index 7b0fa4a..d019901 100644 --- a/doc/saned.man +++ b/doc/saned.man @@ -1,17 +1,26 @@ -.TH saned 8 "20 Apr 2009" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.TH saned 8 "29 Sep 2017" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" .IX saned .SH NAME saned \- SANE network daemon .SH SYNOPSIS .B saned -.B [ \-a +.B [ \-a .I [ username ] -.B | \-d -.I [ n ] -.B | \-s -.I [ n ] -.B | \-h .B ] +.B [ \-u +.I username +.B ] +.B [ \-b +.I address +.B ] +.B [ \-l ] +.B [ \-D ] +.B [ \-o ] +.B [ \-d +.I n +.B ] +.B [ \-e ] +.B [ \-h ] .SH DESCRIPTION .B saned is the SANE (Scanner Access Now Easy) daemon that allows remote clients @@ -19,59 +28,77 @@ to access image acquisition devices available on the local host. .SH OPTIONS .PP The -.B \-a +.B \-l flag requests that .B saned -run in standalone daemon mode. In this mode, +run in standalone daemon mode. In this mode, .B saned -will detach from the console and run in the background, listening for incoming -client connections; +will listen for incoming client connections; .B inetd is not required for .B saned -operations in this mode. If the optional -.B username -is given after -.B \-a -, +operations in this mode. The +.B \-b +flag tells +.B saned +to bind to the +.I address +given. The +.B \-u +flag requests that .B saned -will drop root privileges and run as this user (and group). +drop root privileges and run as the user (and group) associated with +.I username +after binding. +The +.B \-D +flag will request +.B saned +to detach from the console and run in the background. +The flag +.B \-a +is equivalent to the combination of +.B \-l \-B \-u +.I username +options. .PP The .B \-d -and -.B \-s -flags request that -.B saned -run in debug mode (as opposed to -.BR inetd (8) -daemon mode). In this mode, +flag sets the level of .B saned -explicitly waits for a connection request. When compiled with -debugging enabled, these flags may be followed by a number to request -debug info. The larger the number, the more verbose the debug output. -E.g., +debug output. When compiled with debugging enabled, this flag may be +followed by a number to request more or less debug info. The larger +the number, the more verbose the debug output. E.g., .B \-d128 -will request printing of all debug info. Debug level 0 means no debug output -at all. The default value is 2. If flag -.B \-d -is used, the debug messages will be printed to stderr while -.B \-s -requests using syslog. +will request output of all debug info. A level of 0 produces no +output at all. The default value is 2. .PP -If +The +.B \-e +flag will divert +.B saned +debug output to stderr instead of the syslog default. +.PP +The +.B \-o +flag requests that .B saned -is run from inetd, xinetd or systemd, no option can be given. +exits after the first client disconnects. This is useful for debugging. .PP The .B \-h flag displays a short help message. +.PP +If +.B saned +is run from other programs such as inetd, xinetd and systemd, check that +program's documentation on how to pass command-line options. .SH CONFIGURATION -First and foremost: +First and foremost: .B saned is not intended to be exposed to the internet or other non-trusted networks. Make sure that access is limited by tcpwrappers and/or a firewall -setup. Don't depend only on +setup. Don't depend only on .BR saned 's own authentication. Don't run .B saned @@ -81,7 +108,7 @@ install .B saned as setuid root. .PP -The +The .I saned.conf configuration file contains both options for the daemon and the access list. @@ -93,6 +120,13 @@ may have performance issues. Use this option if your \fBsaned\fP server is sitting behind a firewall. If that firewall is a Linux machine, we strongly recommend using the Netfilter \fInf_conntrack_sane\fP module instead. +.TP +\fBdata_connect_timeout\fP = \fItimeout\fP +Specify the time in milliseconds that saned will wait for a data +connection. Without this option, if the data connection is not done +before the scanner reaches the end of scan, the scanner will continue +to scan past the end and may damage it depending on the +backend. Specify zero to have the old behavior. The default is 4000ms. .PP The access list is a list of host names, IP addresses or IP subnets (CIDR notation) that are permitted to use local SANE devices. IPv6 @@ -131,21 +165,21 @@ identical to ahost.com. .SH SERVER DAEMON CONFIGURATION For .B saned -to work properly in its default mode of operation, it is also necessary to -add the appropriate configuration for +to work properly in its default mode of operation, it is also necessary to +add the appropriate configuration for .I (x)inetd or systemd. (see below). Note that your inetd must support IPv6 if you -want to connect to saned over IPv6 ; xinetd, openbsd-inetd and systemd +want to connect to saned over IPv6 ; xinetd, openbsd-inetd and systemd are known to support IPv6, check the documentation for your inetd daemon. .PP -In the sections below the configuration for +In the sections below the configuration for .I inetd, xinetd and .I systemd are described in more detail. .PP -For the configurations below it is necessary to add a line of the following +For the configurations below it is necessary to add a line of the following form to .IR /etc/services : .PP @@ -153,7 +187,7 @@ form to sane\-port 6566/tcp # SANE network scanner daemon .RE .PP -The official IANA short name for port 6566 is "sane\-port". The older name +The official IANA short name for port 6566 is "sane\-port". The older name "sane" is now deprecated. .SH INETD CONFIGURATION It is required to add a single line to the inetd configuration file @@ -183,22 +217,22 @@ Note that both examples assume that there is a .B saned group and a .B saned -user. If you follow this example, please make sure that the +user. If you follow this example, please make sure that the access permissions on the special device are set such that .B saned can access the scanner (the program generally needs read and write access to scanner devices). .SH XINETD CONFIGURATION If xinetd is installed on your system instead of inetd the following example -for -.I /etc/xinetd.conf +for +.I /etc/xinetd.conf may be helpful: .PP .RS .ft CR .nf # default: off -# description: The sane server accepts requests +# description: The sane server accepts requests # for network access to a local scanner via the # network. service sane\-port @@ -214,14 +248,14 @@ service sane\-port .ft R .RE .SH SYSTEMD CONFIGURATION -Saned can be compiled with explicit systemd support. This +Saned can be compiled with explicit systemd support. This will allow logging debugging information to be forwarded to the systemd journal. The systemd support requires compilation with the systemd-devel package installed on the system. this is the preferred option. -Saned can be used wih systemd without the systemd integration -compiled in, but then logging of debug information is not supported. +Saned can be used wih systemd without the systemd integration +compiled in, but then logging of debug information is not supported. The systemd configuration is different for the 2 options, so both are described below. @@ -229,8 +263,8 @@ both are described below. for the systemd configuration we need to add 2 configuration files in .I /etc/systemd/system. .PP -The first file we need to add here is called -.I saned.socket. +The first file we need to add here is called +.I saned.socket. It shall have the following contents: .PP @@ -251,8 +285,8 @@ WantedBy=sockets.target .ft R .RE .PP -The second file to be added is -.I saned@.service +The second file to be added is +.I saned@.service with the following contents: .PP .RS @@ -269,7 +303,7 @@ Group=saned StandardInput=null StandardOutput=syslog StandardError=syslog -Environment=SANE_CONFIG_DIR=@CONFIGDIR@ +Environment=SANE_CONFIG_DIR=@CONFIGDIR@ # If you need to debug your configuration uncomment the next line and # change it as appropriate to set the desired debug options # Environment=SANE_DEBUG_DLL=255 SANE_DEBUG_BJNP=5 @@ -280,21 +314,21 @@ Also=saned.socket .ft R .RE .PP -You need to set an environment variable for +You need to set an environment variable for .B SANE_CONFIG_DIR pointing to the directory where saned can find its configuration files. -you will have to remove the # on the last line and set the variables -for the desired debugging information if required. Multiple variables -can be set by separating the assignments by spaces as shown in the +you will have to remove the # on the last line and set the variables +for the desired debugging information if required. Multiple variables +can be set by separating the assignments by spaces as shown in the example above. .PP -Unlike +Unlike .I (x)inetd , systemd allows debugging output from backends set using .B SANE_DEBUG_XXX to be captured. See the man-page for your backend to see what options are supported. -With the service unit as described above, the debugging output is +With the service unit as described above, the debugging output is forwarded to the system log. .SH Systemd configuration when saned is compiled without systemd support @@ -305,7 +339,7 @@ for systemd configuration for saned, we need to add 2 configuration files in .I /etc/systemd/system. .PP The first file we need to add here is called -.I saned.socket. +.I saned.socket. It is identical to the version for systemd with the support compiled in. It shall have the following contents: .PP diff --git a/doc/scanimage.man b/doc/scanimage.man index 4d47eb8..83624a4 100644 --- a/doc/scanimage.man +++ b/doc/scanimage.man @@ -11,7 +11,7 @@ scanimage \- scan an image .RB [ \-i | \-\-icc\-profile .IR profile ] .RB [ \-L | \-\-list\-devices ] -.RB [ \-f | \-\-formatted\-device\-list +.RB [ \-f | \-\-formatted\-device\-list .IR format ] .RB [ \-b | \-\-batch .RI [= format ]] @@ -24,6 +24,7 @@ scanimage \- scan an image .RB [ \-\-batch\-double ] .RB [ \-\-accept\-md5\-only ] .RB [ \-p | \-\-progress ] +.RB [ \-o | \-\-output-file ] .RB [ \-n | \-\-dont\-scan ] .RB [ \-T | \-\-test ] .RB [ \-A | \-\-all-options ] @@ -84,9 +85,9 @@ or .B \-\-device\-name options must be followed by a .B SANE -device-name like +device-name like .RI ` epson:/dev/sg0 ' -or +or .RI ` hp:/dev/usbscanner0 '. A (partial) list of available devices can be obtained with the .B \-\-list\-devices @@ -94,14 +95,15 @@ option (see below). If no device-name is specified explicitly, .B scanimage reads a device-name from the environment variable .BR SANE_DEFAULT_DEVICE . -If this variable is not set, +If this variable is not set, .B scanimage will attempt to open the first available device. .PP The -.B \-\-format +.B \-\-format .I format -option selects how image data is written to standard output. +option selects how image data is written to standard output or the file specified by +the \-\-output\-file option. .I format can be .BR pnm , @@ -111,7 +113,7 @@ or .BR jpeg . If .B \-\-format -is not used, PNM is written. +is not specified, PNM is written by default. .PP The .B \-i @@ -126,7 +128,7 @@ or option requests a (partial) list of devices that are available. The list is not complete since some devices may be available, but are not listed in any of the configuration files (which are typically stored -in directory +in directory .IR @CONFIGDIR@ ). This is particularly the case when accessing scanners through the network. If a device is not listed in a configuration file, the only way to access it is @@ -161,7 +163,7 @@ SCSI, produced by SHARP The .B \-\-batch* options provide the features for scanning documents using document -feeders. +feeders. .BR \-\-batch .RI [ format ] is used to specify the format of the filename that each page will be written @@ -169,6 +171,7 @@ to. Each page is written out to a single file. If .I format is not specified, the default of out%d.pnm (or out%d.tif for \-\-format tiff, out%d.png for \-\-format png or out%d.jpg for \-\- format jpeg) will be used. +This option is incompatible with the \-\-output\-path option. .I format is given as a printf style string with one integer parameter. .B \-\-batch\-start @@ -177,11 +180,11 @@ selects the page number to start naming files with. If this option is not given, the counter will start at 1. .B \-\-batch\-count .I count -specifies the number of pages to attempt to scan. If not given, +specifies the number of pages to attempt to scan. If not given, scanimage will continue scanning until the scanner returns a state other than OK. Not all scanners with document feeders signal when the ADF is empty, use this command to work around them. -With +With .B \-\-batch\-increment .I increment you can change the amount that the number in the filename is incremented @@ -211,10 +214,20 @@ option requests that .B scanimage prints a progress counter. It shows how much image data of the current image has already been received by -.B scanimage +.B scanimage (in percent). .PP The +.B \-o +or +.B \-\-output\-file +option requests that +.B scanimage +saves the scanning output to the given path. This option is incompatible with the +\-\-batch option. The program will try to guess \-\-format from the file name. +If that is not possible, it will print an error message and exit. +.PP +The .B \-n or .B \-\-dont\-scan @@ -265,7 +278,7 @@ level. .PP The .B \-B -option without argument changes the input buffer size from the default 32KB to 1MB. For finer grained control, use +option without argument changes the input buffer size from the default 32KB to 1MB. For finer grained control, use .B \-\-buffer-size= followed by the number of KB. .PP @@ -426,7 +439,7 @@ is possible to specify multiple such linear segments. For example, "[0]3-[2]3-[6]7,[7]10-[9]6" is equivalent to "3,3,3,4,5,6,7,10,8,6". The program .B gamma4scanimage -can be used to generate such gamma tables (see +can be used to generate such gamma tables (see .BR gamma4scanimage (1) for details). .RE @@ -440,7 +453,7 @@ for details). The description above is an example of an option that takes an arbitrary string value (which happens to be a filename). Again, the value in brackets show that the option is current set to the -filename +filename .BR /tmp/input.ppm . .RE diff --git a/doc/sceptre/s1200.txt b/doc/sceptre/s1200.txt index ade81db..2dc100a 100644 --- a/doc/sceptre/s1200.txt +++ b/doc/sceptre/s1200.txt @@ -30,13 +30,13 @@ Vendor Spec 02 00 00 00 04 00 Get 4 bytes of status. Used to check the button. Default result when the button is not pressed - 06 00 00 00 + 06 00 00 00 INQUIRY result: - 06 00 02 02 30 00 00 10 4b 49 4e 50 4f 20 20 20 ....0...KINPO - 56 69 76 69 64 73 63 61 6e 20 53 31 32 30 20 20 Vividscan S120 - 53 31 33 20 20 20 20 20 02 01 00 00 4a 45 46 46 S13 ....JEFF + 06 00 02 02 30 00 00 10 4b 49 4e 50 4f 20 20 20 ....0...KINPO + 56 69 76 69 64 73 63 61 6e 20 53 31 32 30 20 20 Vividscan S120 + 53 31 33 20 20 20 20 20 02 01 00 00 4a 45 46 46 S13 ....JEFF ... MODE SEL @@ -55,15 +55,15 @@ SET WINDOW 24 00 00 00 00 00 00 00 52 00 The window size is always 0x52 bytes. The parameters look standard: - X/Y resolution | - - Upper left X,Y |- all three coded in 600 dpi units + - Upper left X,Y |- all three coded in 600 dpi units - Width, Length | - + The supported scan modes are: - lineart image comp=0, halftone=0, depth=1 - halftone image comp=0, haltone=1 to 4, depth=1 - grayscale image comp=2, halftone=0, depth=8 - color image comp=5, halftone=0, depth=24 - + Y resolution is not used (X is also used for Y) X resolution is limited to 600 (if above, scanner defaults to 600) Y resolution is limited to 1200 (if above, scanner defaults to 1200) @@ -105,5 +105,3 @@ The shifts are: 50 0 Some resolution give garbage. However that table might not be complete. - - diff --git a/doc/teco/teco1.txt b/doc/teco/teco1.txt index d555e9e..47519fa 100644 --- a/doc/teco/teco1.txt +++ b/doc/teco/teco1.txt @@ -6,8 +6,8 @@ Relisys RELI 2412 (no ADF, no transparency adapter) single pass scanner - 300*1200 dpi - 8.5*14 Inquiry: - 000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20 ....0...RELISYS - 016: 56 4d 33 35 33 30 2b 20 20 20 20 20 20 20 20 20 VM3530+ + 000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20 ....0...RELISYS + 016: 56 4d 33 35 33 30 2b 20 20 20 20 20 20 20 20 20 VM3530+ 032: 31 2e 30 38 31 2e 30 38 02 00 54 45 43 4f 20 56 1.081.08..TECO V 048: 4d 33 35 33 41 M353A Inquiry page 0x82 @@ -16,16 +16,16 @@ Inquiry page 0x82 AVEC Colour 2412 three pass scanner - 300*600 dpi - 8.5*14 - 000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20 ....0... - 016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20 Image Scanner + 000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20 ....0... + 016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20 Image Scanner 032: 31 2e 30 38 31 2e 30 38 02 00 54 45 43 4f 20 56 1.081.08..TECO V 048: 4d 33 35 32 41 M352A Avec Color Office 2400 (no ADF, no transparency adapter) three pass scanner - 300*600 dpi - 8.5*14 Inquiry: - 000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20 ....0... - 016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20 Image Scanner + 000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20 ....0... + 016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20 Image Scanner 032: 32 2e 30 34 32 2e 30 34 02 00 54 45 43 4f 20 56 2.042.04..TECO V 048: 4d 33 35 32 30 M3520 Inquiry page 0x82 @@ -33,8 +33,8 @@ Inquiry page 0x82 016: 20 56 32 2e 30 34 V2.04 RELI 4830 (no ADF, with transparency adapter) - 000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20 ....0...RELISYS - 016: 52 45 4c 49 20 34 38 33 30 20 20 20 20 20 20 20 RELI 4830 + 000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20 ....0...RELISYS + 016: 52 45 4c 49 20 34 38 33 30 20 20 20 20 20 20 20 RELI 4830 032: 31 2e 30 33 31 2e 30 33 02 00 54 45 43 4f 20 56 1.031.03..TECO V 048: 4d 34 35 34 32 M4542 Inquiry page 0x82 @@ -42,9 +42,9 @@ Inquiry page 0x82 016: 20 56 31 2e 30 33 V1.03 Dextra DF-600P - VM3510 - 000: 06 00 02 02 24 00 00 10 44 46 2D 36 30 30 4D 20 ....$...DF-600M - 016: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 - 032: 31 2E 31 37 31 2E 31 37 02 1.171.17. + 000: 06 00 02 02 24 00 00 10 44 46 2D 36 30 30 4D 20 ....$...DF-600M + 016: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 + 032: 31 2E 31 37 31 2E 31 37 02 1.171.17. /*--------------------------------------------------------------------------*/ @@ -54,13 +54,13 @@ SCSI commands supported by the RELISYS VM3530+: TEST UNIT READY 00 00 00 00 00 00 -REQ SENSE +REQ SENSE 03 00 00 00 12 00 VENDOR-09 09 00 00 78 00 00 - 3-4 = length of data to receive. Always 30720 bytes. - Probably 12 lines of calibration at 300dpi. + 3-4 = length of data to receive. Always 30720 bytes. + Probably 12 lines of calibration at 300dpi. 8.5*300*12=30600 VENDOR-0E (?) @@ -77,21 +77,21 @@ INQUIRY: page 0x82 (vendor specific) - real scanner name with version 0-3 = page header - 4 = string length + 4 = string length 5-21 = real scanner name with version MODE SELECT 15 10 00 00 18 00 always sends: - 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 01 - 03 06 02 00 00 01 00 00 + 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 01 + 03 06 02 00 00 01 00 00 SCAN 1B 00 00 00 00 00 SET WINDOW -24 00 00 00 00 00 00 00 63 00 +24 00 00 00 00 00 00 00 63 00 Total length is 99 07 = length (99-8 = 91) 10-11 = X Resolution @@ -116,7 +116,7 @@ Total length is 99 0x06 = 8 X 8 Smooth 0x07 = 8 X 8 Horizontal 0x08 = 8 X 8 Vertical - 37 = + 37 = 0x80 = RIF (VM353A only?) 63 = calibration? 0x00 yes @@ -127,9 +127,9 @@ Total length is 99 93 = 0x80 = ? (seems to activate a contrast value on VM353A) - 37, 55, 57, 59, 61, 65, 67, 69, 71, 73, 75, 77, 79 = 0x80 + 37, 55, 57, 59, 61, 65, 67, 69, 71, 73, 75, 77, 79 = 0x80 85, 89, 93, 97 = 0xff - + READ 28 00 00 00 00 00 00 00 3E 00 6-8 = length @@ -147,10 +147,10 @@ GET DATA BUFFER STATUS returned buffer is 0x10 bytes long. 0-2 = additional length (0x10-3 = 0x0D) 3 = reserved(?) - 8 = ? + 8 = ? 9-11 = filled data buffer 12-13 = number of lines (constant during a scan) - 14-15 = bytes per line (constant during a scan) + 14-15 = bytes per line (constant during a scan) /*--------------------------------------------------------------------------*/ diff --git a/doc/teco/teco2.txt b/doc/teco/teco2.txt index 5b64a83..b45b795 100644 --- a/doc/teco/teco2.txt +++ b/doc/teco/teco2.txt @@ -4,15 +4,15 @@ INQUIRY TECO VM3564 (1) -000: 06 00 02 02 43 00 00 10 52 45 4c 49 53 59 53 20 ....C...RELISYS -016: 41 56 45 43 20 49 49 20 53 33 20 20 20 20 20 20 AVEC II S3 +000: 06 00 02 02 43 00 00 10 52 45 4c 49 53 59 53 20 ....C...RELISYS +016: 41 56 45 43 20 49 49 20 53 33 20 20 20 20 20 20 AVEC II S3 032: 31 2e 30 37 31 2e 30 37 00 01 54 45 43 4f 20 56 1.071.07..TECO V 048: 4d 33 35 36 34 20 00 01 01 2c 00 01 02 58 09 f6 M3564 ...,...X.. 064: 0d af 01 2c 00 08 01 00 ...,.... TECO VM3564 (2) -000: 06 00 02 02 43 00 00 10 52 45 4c 49 53 59 53 20 ....C...RELISYS -016: 41 56 45 43 20 49 49 20 53 33 20 20 20 20 20 20 AVEC II S3 +000: 06 00 02 02 43 00 00 10 52 45 4c 49 53 59 53 20 ....C...RELISYS +016: 41 56 45 43 20 49 49 20 53 33 20 20 20 20 20 20 AVEC II S3 032: 31 2e 30 39 31 2e 30 39 00 01 54 45 43 4f 20 56 1.091.09..TECO V 048: 4d 33 35 36 34 20 00 01 01 2c 00 01 02 58 09 f6 M3564 ...,...X.. 064: 0d af 01 2c 00 08 01 00 ...,.... @@ -25,21 +25,21 @@ TECO VM356A (1) 064: 0d af 01 2c 00 08 01 00 ...,.... TECO VM356A (2) -000: 06 00 02 02 43 00 00 10 50 72 69 6d 61 78 20 20 ....C...Primax -016: 4a 65 77 65 6c 20 20 20 20 20 20 20 20 20 20 20 Jewel +000: 06 00 02 02 43 00 00 10 50 72 69 6d 61 78 20 20 ....C...Primax +016: 4a 65 77 65 6c 20 20 20 20 20 20 20 20 20 20 20 Jewel 032: 31 2e 30 31 31 2e 30 31 00 01 54 45 43 4f 20 56 1.011.01..TECO V 048: 4d 33 35 36 41 20 00 01 01 2c 00 01 02 58 09 f6 M356A ...,...X.. 064: 0d af 01 2c 00 08 01 00 ...,.... TECO VM3575 -000: 06 00 02 02 43 00 00 00 20 20 20 20 20 20 20 20 ....C... -016: 46 6c 61 74 62 65 64 20 53 63 61 6e 6e 65 72 20 Flatbed Scanner +000: 06 00 02 02 43 00 00 00 20 20 20 20 20 20 20 20 ....C... +016: 46 6c 61 74 62 65 64 20 53 63 61 6e 6e 65 72 20 Flatbed Scanner 032: 31 2e 30 33 31 2e 30 33 00 01 54 45 43 4f 20 56 1.031.03..TECO V 048: 4d 33 35 37 35 20 00 01 01 2c 00 01 02 58 09 f6 M3575 ...,...X.. 064: 0d af 01 2c 00 08 01 00 ...,.... TECO VM656A -000: 06 00 02 02 43 00 00 00 52 45 4c 49 53 59 53 20 ....C...RELISYS +000: 06 00 02 02 43 00 00 00 52 45 4c 49 53 59 53 20 ....C...RELISYS 016: 41 50 4f 4c 4c 4f 20 45 78 70 72 65 73 73 20 36 APOLLO Express 6 032: 31 2e 30 33 31 2e 30 33 00 01 54 45 43 4f 20 56 1.031.03..TECO V 048: 4d 36 35 36 41 00 01 01 2c 00 01 02 58 09 f6 0d M656A...,...X... @@ -53,8 +53,8 @@ TECO VM6575 064: 0d af 01 2c 00 08 01 00 ...,.... TECO VM6586 -000: 06 00 02 02 43 00 00 00 20 20 20 20 20 20 20 20 ....C... -016: 46 6c 61 74 62 65 64 20 53 63 61 6e 6e 65 72 20 Flatbed Scanner +000: 06 00 02 02 43 00 00 00 20 20 20 20 20 20 20 20 ....C... +016: 46 6c 61 74 62 65 64 20 53 63 61 6e 6e 65 72 20 Flatbed Scanner 032: 33 2e 30 31 33 2e 30 31 00 01 54 45 43 4f 20 56 3.013.01..TECO V 048: 4d 36 35 38 36 20 00 01 01 2c 00 01 02 58 09 f6 M6586 ...,...X.. 064: 0d af 01 2c 00 08 01 00 ...,.... @@ -93,7 +93,7 @@ Set calibration. Apparently the line is computed from the calibration lines. It INQUIRY -12 00 00 00 48 00 +12 00 00 00 48 00 standard inquiry 72 bytes 32-39: firmware version @@ -123,8 +123,8 @@ SET WINDOW 24 00 00 00 00 00 00 00 35 00 (VM3575) 24 00 00 00 00 00 00 00 38 00 (VM6586) -Total length is - 07 = length +Total length is + 07 = length VM3575 53-8 = 45 VM6586 56-8 = 48 VM3552 69-8 = 61 @@ -142,11 +142,11 @@ Total length is 34 = bit depth? - invariant, always 8 36 = (vm6586 only ?) halftone pattern ? 1 = type 1 dithering - 37 = + 37 = 0x80 = RIF? 48 = color channel to use if scan mode is 0 or 2: - 0x00 = red + 0x00 = red 0x01 = green 0x02 = blue if scan mode is 05 -> ignored @@ -161,10 +161,10 @@ Total length is READ 28 00 00 00 00 19 00 1f 0e 00 5 = number of lines to read - 7-8 = buffer size. + 7-8 = buffer size. Always number of lines to read * size of a line. 0x2000 appears to be the upper limit - + SEND 2A 00 03 00 00 04 00 0C 00 00 @@ -194,7 +194,7 @@ GET DATA BUFFER STATUS 7 = ? always 0x14 11 = bit 7 - (maybe) scanner is ready to send data 12-13 = number of lines (constant during a scan) - 14-15 = bytes per line (constant during a scan) + 14-15 = bytes per line (constant during a scan) 16-17 = garbage (the command only returns 0x10 bytes) @@ -236,32 +236,31 @@ TECO VM656A reads 8 lines of calibration TECO VM6586 ?? Algorithms used (text from Alex Wulms): -The old algorithm was based on the assumption that the calibration value needs -to be an offset, to go from the value obtained during input to the average +The old algorithm was based on the assumption that the calibration value needs +to be an offset, to go from the value obtained during input to the average value (0x800). -E.g., if the input value is 0x800, the calibration value must be 0x800 (0x1000 +E.g., if the input value is 0x800, the calibration value must be 0x800 (0x1000 - 0x800). -Likewise, if the input value is 0x700, the calibration value must be 0x900 +Likewise, if the input value is 0x700, the calibration value must be 0x900 (0x1000 - 0x700) And if the input value is 0x600, the calibration value must be 0xA00 -The new algorithm is based on the assumption that the calibration needs to be -a multiplication factor, to compensate for the too strong or too weak pixel -in the sensor. Again, we want to obtain the average value (approximately +The new algorithm is based on the assumption that the calibration needs to be +a multiplication factor, to compensate for the too strong or too weak pixel +in the sensor. Again, we want to obtain the average value (approximately 0x800) for every pixel read during calibration. -E.g., if the input value is 0x800, the calibration value must be 0x800 +E.g., if the input value is 0x800, the calibration value must be 0x800 (0x800*0x800 / 0x800). -Likewise, if the input value is 0x700, the calibration value must be 0x924 +Likewise, if the input value is 0x700, the calibration value must be 0x924 (0x800*0x800 / 0x700). -And if the input value is 0x600, the calibration value must 0xAAA (0x800*0x800 +And if the input value is 0x600, the calibration value must 0xAAA (0x800*0x800 / 0x600) -Though, carefull comparison with scans done under windows has shown that the -factor is slightly different from 0x800*0x800(=0x400000) but in stead it -seems to be approximately 0x40302f (which would mean that the average value +Though, carefull comparison with scans done under windows has shown that the +factor is slightly different from 0x800*0x800(=0x400000) but in stead it +seems to be approximately 0x40302f (which would mean that the average value is approximately 0x803 in stead of 0x800). Hope this is clarifies the new algorithm. - diff --git a/doc/teco/teco3.txt b/doc/teco/teco3.txt index bc6391f..c263f95 100644 --- a/doc/teco/teco3.txt +++ b/doc/teco/teco3.txt @@ -7,7 +7,7 @@ sharing features of both. Hence a third backend. PIOTECH 3024 (TECO Scorpio/Taurus Infinity VM3552): - 000: 06 00 02 02 43 00 00 10 20 20 20 20 20 20 20 20 ....C... + 000: 06 00 02 02 43 00 00 10 20 20 20 20 20 20 20 20 ....C... 016: 46 6c 61 74 2d 62 65 64 20 73 63 61 6e 6e 65 72 Flat-bed scanner 032: 35 2e 30 38 35 2e 30 38 03 02 54 45 43 4f 20 56 5.085.08..TECO V 048: 4d 33 35 35 32 20 00 01 01 2c 00 01 04 b0 09 f6 M3552 ...,...... @@ -41,13 +41,13 @@ SCSI commands supported by the RELISYS VM3530+: TEST UNIT READY 00 00 00 00 00 00 -REQ SENSE +REQ SENSE 03 00 00 00 12 00 VENDOR-09 09 00 00 78 00 00 - 3-4 = length of data to receive. Always 30720 bytes. - Probably 12 lines of calibration at 300dpi. + 3-4 = length of data to receive. Always 30720 bytes. + Probably 12 lines of calibration at 300dpi. 8.5*300*12=30600 VENDOR-0E (?) @@ -91,7 +91,7 @@ Total length is 99 0x06 = 8 X 8 Smooth 0x07 = 8 X 8 Horizontal 0x08 = 8 X 8 Vertical - 37 = + 37 = 0x80 = RIF ? 48 = color channel to use if scan mode is 0 or 2: @@ -105,7 +105,7 @@ Total length is 99 02 = no 53, 57, 61, 65: 0xff - + READ 28 00 00 00 00 00 00 00 3E 00 6-8 = length @@ -130,7 +130,7 @@ GET DATA BUFFER STATUS 6-8 = scanner memory (with no RAM, it is 32KB on the VM3552) 9-11 = filled data buffer 12-13 = number of lines (constant during a scan) - 14-15 = bytes per line (constant during a scan) + 14-15 = bytes per line (constant during a scan) 16 = ? 17 = in color mode, 0x07 seems to means to the colors are shifted and given by rasters. 0x00 seems to mean that there is no @@ -163,4 +163,3 @@ park the CCD: OBJECT POSITION /*--------------------------------------------------------------------------*/ - diff --git a/doc/umax/negative-types.txt b/doc/umax/negative-types.txt index c1f26ce..142807f 100644 --- a/doc/umax/negative-types.txt +++ b/doc/umax/negative-types.txt @@ -12,4 +12,3 @@ konica 38% 21% 14% 3% 0% 0% --------------------------------------------------------------- agfa 61% 24% 13% 6% 2% 0% --------------------------------------------------------------- - diff --git a/doc/umax/sane-umax-advanced-options-doc.html b/doc/umax/sane-umax-advanced-options-doc.html index dd2277b..fa29952 100644 --- a/doc/umax/sane-umax-advanced-options-doc.html +++ b/doc/umax/sane-umax-advanced-options-doc.html @@ -64,7 +64,7 @@ Supported scanners: <li><a href="http://www.xsane.org/">XSane homepage</a></li> </ul> <br> -</td> +</td> <td VALIGN=TOP BGCOLOR="#FFFFFF"> <blockquote> diff --git a/doc/umax/sane-umax-config-doc.html b/doc/umax/sane-umax-config-doc.html index c5f43b1..a269079 100644 --- a/doc/umax/sane-umax-config-doc.html +++ b/doc/umax/sane-umax-config-doc.html @@ -194,7 +194,7 @@ with the calibration please enable debug output. <p> <i>calibration-full-ccd</i>:<br> The calibration can be done for each element of the CCD (1) -or for each pixel of the requested image(0). +or for each pixel of the requested image(0). The value -1 enables the value defined in the driver. <p> <i>calibration-width-offset</i>:<br> @@ -205,7 +205,7 @@ The value -1 enables the value defined in the driver. <i>calibration-bytes-pixel</i>:<br> Some scanners use 1 byte calibration data although the scanner supports more than 8 bits/pixel. You can define -1 or 2 bytes per pixel calinration data. +1 or 2 bytes per pixel calinration data. The value -1 enables the value defined in the driver. <p> <i>invert-shading-data</i>:<br> diff --git a/doc/umax/sane-umax-mirage-doc.html b/doc/umax/sane-umax-mirage-doc.html index 7c81b43..5d15982 100644 --- a/doc/umax/sane-umax-mirage-doc.html +++ b/doc/umax/sane-umax-mirage-doc.html @@ -278,4 +278,3 @@ Author: <a href="mailto:Oliver.Rauch@rauch-domain.de">Oliver Rauch</a> </body> </html> - diff --git a/doc/umax/sane-umax-standard-options-doc.html b/doc/umax/sane-umax-standard-options-doc.html index da0ade3..b80ca40 100644 --- a/doc/umax/sane-umax-standard-options-doc.html +++ b/doc/umax/sane-umax-standard-options-doc.html @@ -64,7 +64,7 @@ Supported scanners: <li><a href="http://www.xsane.org/">XSane homepage</a></li> </ul> <br> -</td> +</td> <td VALIGN=TOP BGCOLOR="#FFFFFF"> <br> @@ -271,4 +271,3 @@ Author: <a href="mailto:Oliver.Rauch@rauch-domain.de">Oliver Rauch</a> </body> </html> - diff --git a/doc/umax/umax.BUGS b/doc/umax/umax.BUGS index 90af9b8..37e55da 100644 --- a/doc/umax/umax.BUGS +++ b/doc/umax/umax.BUGS @@ -9,4 +9,3 @@ KNOWN BUGS: * pixel count in x-direction is sometimes wrong if xres > 600dpi (Vista S12) * first scan with Astra 2400S produces wrong colors - diff --git a/doc/umax/umax.CHANGES b/doc/umax/umax.CHANGES index 77d8d62..79cca89 100644 --- a/doc/umax/umax.CHANGES +++ b/doc/umax/umax.CHANGES @@ -101,7 +101,7 @@ sane-0.6 / 0.61 / 0.62 -> 0.63 * added support for each color (R,G,B) for highlight and shadow - * added "Astra 1200S" and "UC840" as supported + * added "Astra 1200S" and "UC840" as supported * added bad bugfix for preview-problem with S6E (in umax-scsi.c function start_scan) @@ -344,7 +344,7 @@ sane-0.70/0.71 -> 0.72 * combined bind for highlight, shadow, analog-gamma and new exposure time functions to rgb-bind - + * added set_WD_line_arrangement(buffer_r, WD_line_arrengement_by_driver); if driver is doing color-ordering from line to pixel @@ -423,11 +423,11 @@ sane-0.73 -> 0.74 * added sigterm_handler for umax_reader_process changed sane_canel, do_canel and do_eof(=close_pipe), cancel now works! - + * changed trim_rowbufsize that made problems with SGI, there has been an overflow because of big buffersize - + sane-0.74 -> 1.00 (build 0) --------------------------- @@ -682,7 +682,7 @@ build-15 -> build-16 * OPT_SOURCE: removed change of width/height and "*info |= SANE_INFO_RELOAD_PARAMS;" from get_value to set_value and added "*info |= SANE_INFO_RELOAD_OPTIONS;" - + build-16 -> build-17 -------------------- @@ -782,7 +782,7 @@ build-21 -> build-22 scsi-read commands, it also is possible to give bothe scanners different scsi command queueing depth). - * prepared replacement of pipe by sanei_ipc_* routines + * prepared replacement of pipe by sanei_ipc_* routines * added routines umax_get_lamp_status and umax_set_lamp_status @@ -826,7 +826,7 @@ build-22 -> build-23 * for Astra 2200 selection for different x/y resolutions is disabled - + build-23 -> build-24 (sane-1.0.4) -------------------- @@ -837,8 +837,8 @@ build-23 -> build-24 (sane-1.0.4) * enabled lamp control for Astra 2100S * Added warning in sane_control_option if option could not be set - - + + build-24 -> build-25 -------------------- @@ -906,7 +906,7 @@ build-24 -> build-25 * added #define SANE_I18N(text) text to umax.c. This is to mark the backend specific texts that shall be translated by the frontend - + build-25 -> build-26 -------------------- @@ -925,11 +925,11 @@ build-25 -> build-26 * changed some static unsigned int to static int - * sane_exit does free devlist + * sane_exit does free devlist * added some options for Powerlook 3000 - still is not completly supported - + build-26 -> build-27 -------------------- @@ -940,7 +940,7 @@ build-26 -> build-27 * changed default minimum scsi buffer size from 64KB to 32 KB - + build-27 -> build-28 -------------------- @@ -967,7 +967,7 @@ build-27 -> build-28 * added Heidelberg Linoscan 1400 "HDM LS4H1S" as supported scanner - + build-28 -> build-29 -------------------- @@ -1026,10 +1026,10 @@ build-32 -> build-33 * added USB support for Astra 2200 thanks to Frank Zago <fzago@greshamstorage.com> for creating umax-usb.c and suggesting several changes to umax.c - + * added umax.conf option "connection-type", values: 1=scsi, 2=usb - * added umax.conf device selection "usb 0x1606 0x0230" (usb vendor_id product_id) + * added umax.conf device selection "usb 0x1606 0x0230" (usb vendor_id product_id) * removed #ifdef HAVE_SANEI_IPC parts (SANEI_IPC was never defined) @@ -1169,4 +1169,3 @@ build-44 -> build-45 * added defualt options for Linotype Opal2 * changed bug in highlight-blue function (using green value) - diff --git a/doc/umax/umax.FAQ b/doc/umax/umax.FAQ index 0901a2c..2ffbdfd 100644 --- a/doc/umax/umax.FAQ +++ b/doc/umax/umax.FAQ @@ -39,7 +39,7 @@ A: There are at least two kind of scsi controller cards that On linux you may have the chance to get it work with the recent g_NCR5380-driver. The card does not have IRQ/DMA. - Try the following option for kernel: dtc3181e=0x280,255 + Try the following option for kernel: dtc3181e=0x280,255 or use the following command: insmod g_NCR5380 ncr_irq=255 ncr_addr=0x280 dtc3181e=1 @@ -143,5 +143,3 @@ A: The optimization set by "-O2" makes problems, try which one of the following You find a lot of tips and informations in the internet. E.g. take a look at http://www.scantips.com - - diff --git a/doc/umax/umax.TODO b/doc/umax/umax.TODO index 6af64b6..0d6f5a9 100644 --- a/doc/umax/umax.TODO +++ b/doc/umax/umax.TODO @@ -19,4 +19,3 @@ TODO UMAX BACKEND FOR SANE - I will NOT add support for parallel-port and USB scanners to this backend! Don`t ask for it. - |