diff options
Diffstat (limited to 'sanei/linux_sg3_err.h')
| -rw-r--r-- | sanei/linux_sg3_err.h | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/sanei/linux_sg3_err.h b/sanei/linux_sg3_err.h new file mode 100644 index 0000000..53198c0 --- /dev/null +++ b/sanei/linux_sg3_err.h @@ -0,0 +1,135 @@ +/* sane - Scanner Access Now Easy. + + This file is part of the SANE package. + + SANE is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2 of the License, or (at your + option) any later version. + + SANE is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with sane; see the file COPYING. If not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + As a special exception, the authors of SANE give permission for + additional uses of the libraries contained in this release of SANE. + + The exception is that, if you link a SANE library with other files + to produce an executable, this does not by itself cause the + resulting executable to be covered by the GNU General Public + License. Your use of that executable is in no way restricted on + account of linking the SANE library code into it. + + This exception does not, however, invalidate any other reasons why + the executable file might be covered by the GNU General Public + License. + + If you submit changes to SANE to the maintainers to be included in + a subsequent release, you agree by submitting the changes that + those changes may be distributed with this exception intact. + + If you write modifications of your own for SANE, it is your choice + whether to permit this exception to apply to your modifications. + If you do not wish that, delete this exception notice. +*/ + +#ifndef SG_ERR_H +#define SG_ERR_H + +/* Linux sg error codes taken from Doug Gilbert's sg_utils: + http://www.torque.net/sg/ */ + +/* Some of the following error/status codes are exchanged between the + various layers of the SCSI sub-system in Linux and should never + reach the user. They are placed here for completeness. What appears + here is copied from drivers/scsi/scsi.h which is not visible in + the user space. */ + +/* The following are 'host_status' codes */ +#ifndef DID_OK +#define DID_OK 0x00 +#endif +#ifndef DID_NO_CONNECT +#define DID_NO_CONNECT 0x01 /* Unable to connect before timeout */ +#define DID_BUS_BUSY 0x02 /* Bus remain busy until timeout */ +#define DID_TIME_OUT 0x03 /* Timed out for some other reason */ +#define DID_BAD_TARGET 0x04 /* Bad target (id?) */ +#define DID_ABORT 0x05 /* Told to abort for some other reason */ +#define DID_PARITY 0x06 /* Parity error (on SCSI bus) */ +#define DID_ERROR 0x07 /* Internal error */ +#define DID_RESET 0x08 /* Reset by somebody */ +#define DID_BAD_INTR 0x09 /* Received an unexpected interrupt */ +#define DID_PASSTHROUGH 0x0a /* Force command past mid-level */ +#define DID_SOFT_ERROR 0x0b /* The low-level driver wants a retry */ +#endif + + + +/* These defines are to isolate applictaions from kernel define changes */ +#define SG_ERR_DID_OK DID_OK +#define SG_ERR_DID_NO_CONNECT DID_NO_CONNECT +#define SG_ERR_DID_BUS_BUSY DID_BUS_BUSY +#define SG_ERR_DID_TIME_OUT DID_TIME_OUT +#define SG_ERR_DID_BAD_TARGET DID_BAD_TARGET +#define SG_ERR_DID_ABORT DID_ABORT +#define SG_ERR_DID_PARITY DID_PARITY +#define SG_ERR_DID_ERROR DID_ERROR +#define SG_ERR_DID_RESET DID_RESET +#define SG_ERR_DID_BAD_INTR DID_BAD_INTR +#define SG_ERR_DID_PASSTHROUGH DID_PASSTHROUGH +#define SG_ERR_DID_SOFT_ERROR DID_SOFT_ERROR + +/* The following are 'driver_status' codes */ +#ifndef DRIVER_OK +#define DRIVER_OK 0x00 +#endif +#ifndef DRIVER_BUSY +#define DRIVER_BUSY 0x01 +#define DRIVER_SOFT 0x02 +#define DRIVER_MEDIA 0x03 +#define DRIVER_ERROR 0x04 +#define DRIVER_INVALID 0x05 +#define DRIVER_TIMEOUT 0x06 +#define DRIVER_HARD 0x07 +#define DRIVER_SENSE 0x08 /* Sense_buffer has been set */ + +/* Following "suggests" are "or-ed" with one of previous 8 entries */ +#define SUGGEST_RETRY 0x10 +#define SUGGEST_ABORT 0x20 +#define SUGGEST_REMAP 0x30 +#define SUGGEST_DIE 0x40 +#define SUGGEST_SENSE 0x80 +#define SUGGEST_IS_OK 0xff +#endif +#ifndef DRIVER_MASK +#define DRIVER_MASK 0x0f +#endif +#ifndef SUGGEST_MASK +#define SUGGEST_MASK 0xf0 +#endif + +/* These defines are to isolate applictaions from kernel define changes */ +#define SG_ERR_DRIVER_OK DRIVER_OK +#define SG_ERR_DRIVER_BUSY DRIVER_BUSY +#define SG_ERR_DRIVER_SOFT DRIVER_SOFT +#define SG_ERR_DRIVER_MEDIA DRIVER_MEDIA +#define SG_ERR_DRIVER_ERROR DRIVER_ERROR +#define SG_ERR_DRIVER_INVALID DRIVER_INVALID +#define SG_ERR_DRIVER_TIMEOUT DRIVER_TIMEOUT +#define SG_ERR_DRIVER_HARD DRIVER_HARD +#define SG_ERR_DRIVER_SENSE DRIVER_SENSE +#define SG_ERR_SUGGEST_RETRY SUGGEST_RETRY +#define SG_ERR_SUGGEST_ABORT SUGGEST_ABORT +#define SG_ERR_SUGGEST_REMAP SUGGEST_REMAP +#define SG_ERR_SUGGEST_DIE SUGGEST_DIE +#define SG_ERR_SUGGEST_SENSE SUGGEST_SENSE +#define SG_ERR_SUGGEST_IS_OK SUGGEST_IS_OK +#define SG_ERR_DRIVER_MASK DRIVER_MASK +#define SG_ERR_SUGGEST_MASK SUGGEST_MASK + +#endif |