summaryrefslogtreecommitdiff
path: root/sanei/sanei_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'sanei/sanei_scsi.c')
-rw-r--r--sanei/sanei_scsi.c76
1 files changed, 38 insertions, 38 deletions
diff --git a/sanei/sanei_scsi.c b/sanei/sanei_scsi.c
index 2413d8f..ca3dbb0 100644
--- a/sanei/sanei_scsi.c
+++ b/sanei/sanei_scsi.c
@@ -252,11 +252,11 @@ static int unit_ready (int fd);
#endif
#if USE == SYSVR4_INTERFACE
-# define MAX_DATA 56*1024 /* don't increase or kernel will dump
- * tested with adsl, adsa and umax backend
- * it depends on the lowend scsi
- * drivers . But the most restriction
- * is in the UNIXWARE KERNEL witch do
+# define MAX_DATA 56*1024 /* don't increase or kernel will dump
+ * tested with adsl, adsa and umax backend
+ * it depends on the lowend scsi
+ * drivers . But the most restriction
+ * is in the UNIXWARE KERNEL witch do
* not allow more then 64kB DMA transfers */
static char lastrcmd[16]; /* hold command block of last read command */
#endif
@@ -875,7 +875,7 @@ sanei_scsi_open (const char *dev, int *fdp,
int fd, i;
#if USE == LINUX_INTERFACE
static int first_time = 1;
-#elif USE == MACOSX_INTERFACE
+#elif USE == MACOSX_INTERFACE
UInt8 *guid;
int len;
u_int d;
@@ -909,7 +909,7 @@ sanei_scsi_open (const char *dev, int *fdp,
With newer versions of the SG driver, check the available buffer
size by opening all SG device files belonging to a scanner,
issue the ioctl calls for setting and reading the reserved
- buffer size, and take the smallest value.
+ buffer size, and take the smallest value.
For older version of the SG driver, which don't support variable
buffer size, try to read /proc/sys/kernel/sg-big-biff ; if
@@ -958,7 +958,7 @@ sanei_scsi_open (const char *dev, int *fdp,
if (sscanf (dev, "b%dt%dl%d", &bus, &target, &lun) != 3)
{
- DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
+ DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
dev, strerror (errno));
return SANE_STATUS_INVAL;
}
@@ -1149,7 +1149,7 @@ sanei_scsi_open (const char *dev, int *fdp,
}
else
{
- DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev,
+ DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev,
strerror (errno));
return SANE_STATUS_INVAL;
}
@@ -1163,7 +1163,7 @@ sanei_scsi_open (const char *dev, int *fdp,
if (4 !=
sscanf (dev, "/dev/passthru0:%d,%d,%d,%d", &bus, &cnt, &id, &lun))
{
- DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
+ DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n",
dev, strerror (errno));
return SANE_STATUS_INVAL;
}
@@ -1222,21 +1222,21 @@ sanei_scsi_open (const char *dev, int *fdp,
{
char scsi_hca_name[20];
u_int hca = 0;
-
+
if (sscanf (dev, "h%ub%ut%ul%u", &hca, &bus, &target, &lun) != 4)
{
DBG (1, "sanei_scsi_open: device name %s is not valid\n", dev);
return SANE_STATUS_INVAL;
}
-
+
snprintf(scsi_hca_name, 19, "\\\\.\\Scsi%d:", hca);
scsi_hca_name[19] = 0;
-
+
fd = CreateFile(scsi_hca_name, GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL, OPEN_EXISTING,
FILE_FLAG_RANDOM_ACCESS, NULL );
-
+
if (fd == INVALID_HANDLE_VALUE) fd = -1;
}
#else
@@ -1420,7 +1420,7 @@ sanei_scsi_open (const char *dev, int *fdp,
else
{
/* we have a really old SG driver version, or we're not opening
- an SG device file
+ an SG device file
*/
if (ioctl (fd, SG_GET_TIMEOUT, &ioctl_val) < 0)
{
@@ -2436,8 +2436,8 @@ issue (struct req *req)
}
#if 0
- /* Sometimes the Linux SCSI system reports bogus resid values.
- Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers,
+ /* Sometimes the Linux SCSI system reports bogus resid values.
+ Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers,
if command queueing is used. So we better issue only a warning
*/
if (status == SANE_STATUS_GOOD)
@@ -2601,7 +2601,7 @@ issue (struct req *req)
}
static int /* Returns 1 if match with 'name' set, else 0 */
-
+
lx_scan_sg (int exclude_devnum, char *name, size_t name_len,
int host, int channel, int id, int lun)
{
@@ -2636,7 +2636,7 @@ issue (struct req *req)
}
static int /* Returns 1 if match, else 0 */
-
+
lx_chk_devicename (int guess_devnum, char *name, size_t name_len,
int host, int channel, int id, int lun)
{
@@ -2945,8 +2945,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
char *me = "sanei_scsi_find_devices";
char path[PATH_MAX];
char dev_name[128];
- struct dirent buf;
- struct dirent *de;
+ struct dirent *buf;
DIR *scsidevs;
FILE *fp;
char *ptr;
@@ -2987,8 +2986,9 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
number = -1;
for (;;)
{
- ret = readdir_r(scsidevs, &buf, &de);
- if (ret != 0)
+ errno = 0;
+ buf = readdir (scsidevs);
+ if (errno != 0)
{
DBG (1, "%s: could not read directory %s: %s\n",
me, SYSFS_SCSI_DEVICES, strerror(errno));
@@ -2996,14 +2996,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
break;
}
- if (de == NULL)
+ if (buf == NULL)
break;
- if (buf.d_name[0] == '.')
+ if (buf->d_name[0] == '.')
continue;
/* Extract bus, channel, id, lun from directory name b:c:i:l */
- ptr = buf.d_name;
+ ptr = buf->d_name;
for (i = 0; i < 4; i++)
{
errno = 0;
@@ -3028,7 +3028,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
if (*end && (*end != ':'))
{
- DBG (1, "%s: parse error on string %s (%d)\n", me, buf.d_name, i);
+ DBG (1, "%s: parse error on string %s (%d)\n", me, buf->d_name, i);
i = 12; /* Skip */
break;
@@ -3036,7 +3036,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
if (val > INT_MAX)
{
- DBG (1, "%s: integer value too large (%s)\n", me, buf.d_name);
+ DBG (1, "%s: integer value too large (%s)\n", me, buf->d_name);
i = 12; /* Skip */
break;
@@ -3059,11 +3059,11 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
for (i = 0; i < 3; i++)
{
ret = snprintf (path, PATH_MAX, "%s/%s/%s",
- SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]);
+ SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]);
if ((ret < 0) || (ret >= PATH_MAX))
{
DBG (1, "%s: skipping %s/%s, PATH_MAX exceeded on %s\n",
- me, SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]);
+ me, SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]);
i = 12; /* Skip */
break;
@@ -3179,7 +3179,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
scsireq_t hdr;
int result;
-/* xxx obsolete:
+/* xxx obsolete:
cdb_size = CDB_SIZE (*(u_char *) src);
*/
@@ -3201,7 +3201,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
/* The old variant:
hdr.databuf = (char *) src + cdb_size;
hdr.datalen = src_size;
- xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size)
+ xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size)
*/
hdr.databuf = (char *) src;
hdr.datalen = src_size;
@@ -5013,7 +5013,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
#if USE == WIN32_INTERFACE
SANE_Status
-sanei_scsi_cmd2 (int fd,
+sanei_scsi_cmd2 (int fd,
const void *cmd, size_t cmd_size,
const void *src, size_t src_size,
void *dst, size_t * dst_size)
@@ -5049,8 +5049,8 @@ sanei_scsi_cmd2 (int fd,
pkt.sptd.DataBuffer = src;
}
else {
- pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED;
- }
+ pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED;
+ }
pkt.sptd.TimeOutValue = sane_scsicmd_timeout;
@@ -5081,7 +5081,7 @@ sanei_scsi_cmd2 (int fd,
else {
return SANE_STATUS_IO_ERROR;
}
- }
+ }
else if (pkt.sptd.ScsiStatus != 0) {
DBG (1, "sanei_scsi_cmd2: ScsiStatus is %d\n",
pkt.sptd.ScsiStatus);
@@ -5152,14 +5152,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel,
adapter = (PSCSI_ADAPTER_BUS_INFO)buffer;
- for(i = 0; i < adapter->NumberOfBuses; i++) {
+ for(i = 0; i < adapter->NumberOfBuses; i++) {
if (adapter->BusData[i].InquiryDataOffset == 0) {
/* No device here */
continue;
}
- inquiry = (PSCSI_INQUIRY_DATA) (buffer +
+ inquiry = (PSCSI_INQUIRY_DATA) (buffer +
adapter->BusData[i].InquiryDataOffset);
while(1) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 04:16:07 +0000