From 58912f68c2489bcee787599837447e0d64dfd61a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 24 May 2017 21:03:56 +0200 Subject: New upstream version 1.0.27 --- ChangeLog-1.0.17 | 1011 ------------------------------------------------------ 1 file changed, 1011 deletions(-) delete mode 100644 ChangeLog-1.0.17 (limited to 'ChangeLog-1.0.17') diff --git a/ChangeLog-1.0.17 b/ChangeLog-1.0.17 deleted file mode 100644 index 4cc0ed4..0000000 --- a/ChangeLog-1.0.17 +++ /dev/null @@ -1,1011 +0,0 @@ -****** Release of sane-backends 1.0.17. End of code freeze ****** - -2005-12-18 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added link to Lexmark X6170. - * doc/descriptions/gt68xx.desc: Added Trust Direct WebScan 19200 - (reported on sane-devel). - * backend/Makefile.in: Added missing genesys_conv.c and - genesys_conv_hlp.c to DISTFILES. Without this change the files - wouldn't be part of the archive. - * configure configure.in: Disabled compilation warnings. Increased - version number. - -2005-12-17 Karl Heinz Kremer - - * doc/descriptions/epson.desc: Added a few new scanners based on - messages to the sane-devel mailing list. - -2005-12-11 Henning Meier-Geinitz - - * NEWS: Updated for release. - ----- CODE FREEZE FOR SANE 1.0.17 --- - -2005-12-10 Henning Meier-Geinitz - - * doc/descriptions-external/hp3500.desc: Added .desc file for new - external backend hp3500 which provides support for the HP ScanJet - 3500 series (from Troy Rollo ). - * doc/descriptions/unsupported.desc: Removed HP 3500, 3530, and - 3570 (now in hp3500.desc). - -2005-12-09 Henning Meier-Geinitz - - * doc/descriptions-external/brother-mfc4600.desc: Added .desc file - for (older) external backend for Brother MFC 4600 (USB version). - * doc/descriptions/unsupported.desc: Added Lexmark X6170. Removed - Brother MFC 4600 USB. - * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c - backend/gt68xx_low.c doc/descriptions/gt68xx.desc - doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Silenced - non-fatal warnings/error messages. Several fixes for avoiding - freezes/timeouts after cancelling a scan. Several fixes for - warming up of lamp. Decreased scan width of Plustek OpticPro - 1248U. - -2005-12-08 Gerhard Jaeger - - * backend/plustek-pp_tpa.c backend/u12-tpa.c: Fixed nasty - compiler warnings. - -2005-12-07 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Brother - MFC-7300c. Removed Primax Colorado 2400U (now in - primascan.desc). - * doc/descriptions-external/primascan.desc: New external backend - for Primax Colorado 2400U. - -2005-12-07 Gerhard Jaeger - - * sanei/sanei_acces.c: Fixed problem, when the device name contains - one or more path-separators. These characters are now converted. - The problem occurs on 2.4 based installations as well as on OpenBSD. - -2005-12-06 Stephane Voltz - - * backend/genesys_gl646.c: removed forgotten left-over of - an experiment . - -2005-12-06 Stephane Voltz - - * backend/genesys_gl646.c: added AF init in powersave, fixed - long-standing bug related to a data read timeout between - distinct scanning sessions - -2005-12-06 Henning Meier-Geinitz - - * backend/genesys.conf: Enabled Canon LiDE 60 which was disabled - for safety reasons. Bugs are fixed now. - * doc/descriptions/genesys.desc: Changed status of Canon LiDE 50 - and 60 to "good". Added comment for untested LiDE 40 to report any - success/failure. - * AUTHORS: Marked Fred Odendaal as active maintainer. - * tools/hotplug/libsane.usermap: Added Epson Perfection 3490. - -2005-12-05 Rene Rebe - - * backend/avision.c backend/avision.conf doc/sane-avision.man: - fixed more typos in comments and debug output, removed obsolete - options from the parser, example avision.conf and manual page. - Fixed 12 Bit gray and color modes to actually work as well as - software CCD line-difference correction. Minimal scan resolutions - have been slightly adapted for some ASICs. - -2005-12-05 Pierre Willenbrock - - * backend/genesys.c: removed usage of current_setup in functions - where it is not necessarily initialized. Modified shading - calibration to not use fixed stripe sizes. Fixed memory - corruption while calculating shading data. Fixed read sizes to - be multiples of 256. Fixed stagger/line distance - correction. Fixed line shrinking to correctly update data - buffers. Bumped BUILD number. - * backend/genesys.c backend/genesys_conv.c: Added gray to lineart - conversion. - * backend/genesys.c backend/genesys_conv_hlp.c: Modified calling - parameters to stagger/line distance correction filter to better - describe its inner working. - * backend/genesys_devices.c: Slowed down motor timings for - LiDE 35/40/50/60. Removed untested message for LiDE 35/40/50/60. - * backend/genesys_gl646.c: Fixed bug for odd pixel count. Added - support for gray to lineart conversion. - * backend/genesys_gl841.c: Fixed words_per_line calculation. Added - support for gray to lineart conversion(not used). Fixed problem - with scanners not backtracking while scanning calibration area - leading to scanning part of document area. - -2005-12-05 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-scsi.c: small bugfix for Benq5150 - -2005-12-05 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Canon PIXMA MP170. - -2005-12-04 Rene Rebe - - * backend/avision.c backend/avision.h: updated the Avision backend - from BUILD 167 to 179, including support for HP 5370, AV600U, - AV210C2, AV220C2, et. al. The USB i/o paths got hardened, and a - lot of fixes as well es enhancements and optimizations where added - and a lot of typos, mostly in debug output and comments, got fixed. - The "Line Art" mode was renamed to "Lineart" to match the other - backends. - -2005-12-03 Karl Heinz Kremer - - * backend/epson_usb.c: Added id for CX4200 - -2005-12-04 Oliver Schwartz - - * backend/snapscan.h backend/snapscan.c backend/snapscan-scsi.c - backend/snapscan-options.c: Some fixes for Benq 5150 - -2005-12-03 Peter Fales - * backend/gphoto2.c: Cosmetic changes to debug messages - -2005-12-02 Oliver Schwartz - - * backend/snapscan-sources.c: Another fix for lineart mode for the - Epson 3490 @ 3200 DPI - this time tested - * backend/snapscan.c: Change version number to 1.4.50 - -2005-12-01 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added link for Corex Cardscan - 500. - -2005-11-30 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added UMAX Astra 4100. - * tools/hotplug/libsane.usermap: Added Epson Stylus CX4200. - -2005-11-28 Jochen Eisinger - - * sanei/sanei_pa4s2.c: incorrect test of a bit mask. - -2005-11-28 Stephane Voltz - - * backend/umax_pp_low.c: ifdef'ed forgottent debug statements - -2005-11-28 Stephane Voltz - - * backend/umax_pp_low.c: fixed 'blue tint' on scanning area border - by increasing shading coefficient on dark areas - -2005-11-26 Oliver Schwartz - - * backend/snapscan-sources.c: Fix lineart mode for Epson 3490 - * doc/descriptions/snapscan.desc: Update status for Benq 5000 - -2005-11-26 Oliver Schwartz - - * backend/snapscan-scsi.c: Fix for Benq 5000 - * backend/snapscan.conf: Replace esfw52.bin with dummy filename entry - -2005-11-25 Mattias Ellert - - * backend/artec_eplus48u.conf, backend/snapscan.conf: Use default - firmware dirs in config files - * doc/sane-artec_eplus48u.man, doc/sane-snapscan.man: Use default - firmare dirs in man pages - -2005-11-25 Ulrich Deiters - - * backend/canon-sane: fixed usage of an uninitialized variable - -2005-11-25 Henning Meier-Geinitz - - * po/sane-backends.da.po: Updated Danish translation (from Mogens - Jaeger ). - -2005-11-25 Oliver Schwartz - - * backend/snapscan-sources.c: Fix for grayscale / linart for Epson 3490 - at 3200 DPI - -2005-11-25 Mattias Ellert - - * po/sane-backends.ru.po: Fixing some fuzzies - -2005-11-24 Mattias Ellert - - * doc/gamma4scanimage.man, doc/sane-abaton.man, doc/sane-agfafocus.man, - doc/sane-apple.man, doc/sane-artec.man, doc/sane-avision.man, - doc/sane-bh.man, doc/sane-canon.man, doc/sane-canon630u.man, - doc/sane-config.man, doc/sane-coolscan.man, doc/sane-coolscan2.man, - doc/sane-dc210.man, doc/sane-dc240.man, doc/sane-dc25.man, - doc/sane-dmc.man, doc/sane-epson.man, doc/sane-find-scanner.man, - doc/sane-fujitsu.man, doc/sane-genesys.man, doc/sane-gphoto2.man, - doc/sane-gt68xx.man, doc/sane-hp.man, doc/sane-hp4200.man, - doc/sane-hp5400.man, doc/sane-ibm.man, doc/sane-leo.man, - doc/sane-lexmark.man, doc/sane-ma1509.man, doc/sane-matsushita.man, - doc/sane-microtek.man, doc/sane-microtek2.man, doc/sane-mustek.man, - doc/sane-mustek_pp.man, doc/sane-mustek_usb2.man, doc/sane-nec.man, - doc/sane-net.man, doc/sane-niash.man, doc/sane-pint.man, - doc/sane-plustek.man, doc/sane-plustek_pp.man, doc/sane-ricoh.man, - doc/sane-s9036.man, doc/sane-sceptre.man, doc/sane-sharp.man, - doc/sane-snapscan.man, doc/sane-sp15c.man, doc/sane-st400.man, - doc/sane-tamarack.man, doc/sane-teco1.man, doc/sane-teco2.man, - doc/sane-teco3.man, doc/sane-u12.man, doc/sane-umax1220u.man, - doc/sane-umax_pp.man, doc/sane-usb.man, doc/sane-v4l.man, - doc/sane.man, doc/saned.man, doc/scanimage.man: man page fixes - -2005-11-23 Oliver Schwartz - - * backend/snapscan-options.c: Disable bilevel colour / halftoning - for Epson 3490 - -2005-11-23 Mattias Ellert - - * backend/Makefile.in: added "artec_eplus48u" to FIRMWARE_DIRS - -2005-11-22 Mattias Ellert - - * po/sane-backends.sv.po: Updated Swedish translation - * sanei/sanei_scsi.c: Added some debugging. Fixed some varnings - ----- FEATURE FREEZE FOR SANE 1.0.17 --- - -2005-11-20 Henning Meier-Geinitz - - * backend/genesys.c backend/genesys_devices.c - backend/genesys.conf: Bumped build number. Changed scanner's - name to Canon LiDE 35/40/50. Added Canon LiDE LiDE 60. This scanner - is still commented out in genesys.conf. Removed comment sign for - Canon LiDE 35/40/50 in genesys.conf. - * doc/descriptions/genesys.desc: Added Canon LiDE 35, 40, 50, 60. - * doc/sane-genesys.man: Updated concerning gl841 scanners. - * doc/descriptions/unsupported.desc: Moved Canon LiDE 35/40/50/60 - to genesys.desc. Added Canon Pixma MP150, Tevion MD 90070 and - Primax Colorado 1200p. - * tools/hotplug/libsane.usermap: Added Plustek Opticslim 2400 ids - (from Jan Matousek). - * NEWS: Updated. - -2005-11-19 Pierre Willenbrock - - * backend/genesys_gl841.c backend/genesys_devices.c: - Added support for Canon LiDE 35/40/50 - * backend/genesys.c backend/genesys_low.h - backend/genesys_gl646.c: Reworked data conversion - process to convert CIS data, added new slope - generation variant - * backend/genesys_conv.c backend/genesys_conv_hlp.c: - Moved conversion filter functions out of - backend/genesys.c - -2005-11-18 Oliver Schwartz - - * backend/snapscan-options.c: Disable 2400 DPI for - Epson 3490, use 1600 DPI instead - -2005-11-17 Gerhard Jaeger - - * doc/plustek/Plustek-PARPORT.changes: Update. - * backend/plustek_pp.c backend/plustek-pp.h - backend/plustek-pp_ptdrv.c backend/plustek-pp_wrapper.c: - Fixed sizeof(long) issue for 64bit platforms, see - bugreport #302195. - * backend/plustek_pp.conf: Default config now only tries to - access parport using libieee1284. - -2005-11-15 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-options.c - backend/snapscan-scsi.c: Enabled quality calibration for the - Epson 3490 - * doc/descriptions/snapscan.desc: Changed status for Epson Perfection - 3490 (good) and 3590 (basic) - -2005-11-15 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added HP Scanjet 4890. Added - several Optrox scanners. - * doc/descriptions-external/brother.desc: Marked status of - MFC-9880 as "unsupported" based on a user's report. - -2005-11-13 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added IOmagic MobileScan - USB. Mentioned chips used in the Artec AM12E+. - * doc/descriptions-external/hp3770.desc - doc/descriptions-external/hp8200.desc: Added clarification - concerning status of these backends. - -2005-11-10 Oliver Schwartz - * backend/snapscan.c backend/snapscan-sources.c: Added - deinterlacing for Epson 3490 - * backend/Makefile.in: added "snapscan" to FIRMWARE_DIRS - -2005-11-07 m. allan noah - - * backend/fujitsu.c: M3091/2 lie about gamma dl capability - -2005-11-07 Henning Meier-Geinitz - - * doc/descriptions/microtek2.desc: Fixed "unmaintained" - marker. Added Microtek Scanmaker V6UPL (bug #302464). - * tools/check-usb-chip.c: Added detection of rts8822l-01h chipset - (patch from Jonathan Bravo Lopez ). - -2005-11-06 Henning Meier-Geinitz - - * doc/descriptions-external/epkowa.desc: Disabled man page link - (points to nowhere). Bug #302463. - * doc/descriptions/unsupported.desc: Added Canon PIXMA MP130. - * doc/sane-hp.man doc/sane-microtek2.man: Fixed links to ppscsi. - -2005-11-02 Oliver Schwartz - - * sanei/sanei_usb.c: Fixed output of transfer buffer for - usb_read_bulk in OS/2. - * backend/snapscan.c backend/snapscan-scsi.c: Fixes for Benq 5000 - * backend/snapscan-usb.c: Avoid recursive calls of usb_sense_handler - -2005-11-01 Henning Meier-Geinitz - - * sanei/sanei_usb.c: Added support for detecting vendor and - product id with FreeBSD kernel scanner driver (based on patch in - FreeBSD ports). - * README.freebsd: Updated information about USB scanners. - -2005-10-31 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h - backend/snapscan-options.c doc/descriptions/snapscan.desc: - Distinguish between 5000/5000E/5000U - * backend/snapscan-sources.c: Enable deinterlacer for 5000E/5000U - for 1200 DPI - * backend/snapscan.conf: Fix names for 5000/5000E/5000U - -2005-10-30 Giuseppe Sacco - - * po/*it.po: Updated italian translation - -2005-10-29 Henning Meier-Geinitz - - * backend/artec_eplus48u.conf - doc/descriptions/artec_eplus48u.desc: Added support for Trust - 240H Easy Webscan Gold to artec_eplus48u backend. - * Makefile.in acinclude.m4 configure configure.in - backend/Makefile.in frontend/Makefile.in lib/Makefile.in - sanei/Makefile.in tools/Makefile.in: - Run "makedepend" if it's available. This way "make" builds - backends correctly even if only included files (e.g. headers) are - changed. Don't be too verbose when running makedepend. - Create links libsane-*.so.1 to the real library files if the - links are not there. This fixes dynamic loading on OpenBSD. The - links are not created for MacOS X as they don't work there. - Remove any libsane.* links in /usr/local/lib/sane. Such links - are created by libtool. As they point to libsane-v4l.so, - scanimage -L doesn't find any scanner in case of ld.so - misconfigurations. - The install target is much quiter now and prints the libtool - message only once now. - * README.openbsd: Removed comment about broken library links. - -2005-10-28 Gerhard Jaeger - - * po/*.po: Updated po files, corrected/updated german translation. - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c backend/plustek.h: Added OPTION_SPEEDUP. - * backend/plustek-usbdevs.c: Changed high-speed setting for - UMAX 3400, due to bugreport #302317. - Fixed CanoScan N650U settings (bugreport #302433). - -2005-10-25 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c: Bumped build number. - * backend/plustek-usbdevs.c: Tweaked LiDE25 settings. - * backend/plustek-usb.c: Let CIS devices use green-channel - for gray scans. - * backend/plustek-usbcal.c: Fixed segfault condition in fine - calibration for gray scanmodes. - -2005-10-24 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h - backend/snapscan-options.c: Fix transparency range for Epson - 2480/2580, fix preview for Epson 2580. - -2005-10-24 Henning Meier-Geinitz - - * doc/descriptions/umax1220u.desc: Marked backend as - unmaintained. Used non-broken link. - -2005-10-23 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-scsi.c: Fixes for buffer - size in high-res modes by Simon Munton, small changes to delay - code. - -2005-10-23 Henning Meier-Geinitz - - * tools/hotplug/libsane.usermap: Added Epson Stylus DX3850 (from - niels_kalle ). - -2005-10-22 Eddy De Greef - - * backend/mustek_pp_cis.c: Decreased the maximum number of pixels - on a line for CIS scanners a bit to avoid border artifacts. - -2005-10-22 Eddy De Greef - - * backend/mustek_pp_cis.c backend/mustek_pp_cis.h - doc/sane-mustek_pp.man: Added an optional engine_delay parameter - to work around potential engine instability problems for CIS models. - -2005-10-21 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c: Bumped build number. - * backend/plustek-usbdevs.c: Fixed high-speed feature of - Canoscan D660U. - -2005-10-20 Oliver Schwartz - - * backend/snapscan-scsi.c: Fixes for 16 bit - quality calibration by Simon Munton - -2005-10-18 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added HP ScanJet 7650 and - UMAX Astra 2500. - * doc/descriptions-external/brother2.desc: MFC-210C is reported to - work. - * NEWS: Created entry for sane-backends 1.0.17. - -2005-10-17 Henning Meier-Geinitz - - * acinclude.m4 configure: Fixed check for libpthread functions. - * tools/hotplug/libsane.usermap: Added Brother MFC 210C (from - Benjamin Mirza ). - * doc/descriptions-external/epkowa.desc: Updated for iscan 1.17.0 - (patch from Olaf Meeuwissen ). Bug #302183. - -2005-10-16 Henning Meier-Geinitz - - * AUTHORS: Marked Michael Herder as not active. No activity since - some time, most email addresses bounce, no response to - pings. Changed contact address to the only one that doesn't - directly bounce. - * backend/artec_eplus48u.conf: Added support for UMAX AstraSlim - 1200 SE (from Harq al-Ada ). - * doc/descriptions/artec_eplus48u.desc: UMAX AstraSlim - 1200 SE is supported. Backend is unmaintained. - * doc/descriptions/unsupported.desc: Added HP ScanJet - 4850C. Removed UMAX AstraSlim 1200 SE. - * backend/gt68xx.c backend/gt68xx_generic.c - doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Minor - modifications to sheet-fed scanner support. - * backend/mustek_usb2.c backend/mustek_usb2.h - backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h - backend/mustek_usb2_high.c backend/mustek_usb2_high.h - backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c - doc/descriptions/mustek_usb2.desc - doc/mustek_usb2/mustek_usb2.CHANGES: - Removed typedefs for DWORD, WORD and so on. Used int, unsigned - short, ... directly in the code. - * AUTHORS configure configure.in backend/Makefile.in - backend/dll.conf backend/lexmark-x1100.c backend/lexmark.c - backend/lexmark.conf backend/lexmark.h doc/Makefile.in - doc/sane-lexmark.man tools/hotplug/libsane.usermap: Added lexmark - backend (from Fred Odendaal ). - * frontend/tstbackend.c: Added vendor "Lexmark". - * doc/sane.tex: Added vendor "Lexmark". Used current date. - * doc/descriptions-external/lexmark.desc - doc/descriptions/lexmark.desc: Moved to doc/descriptions. Added - "new" marker. Added manpage link. Updated version. Marked X1180 - as "basic" according to man page. - * doc/sane.man: Added lexmark backend. - * backend/Makefile.in doc/Makefile.in tools/Makefile.in: Make - "make dist" work again. - * acinclude.m4 configure include/sane/config.h.in: Check for - pthread_cancel() and pthread_testcancel(). - -2005-10-15 Jochen Eisinger - - * doc/descriptions/mustek_pp.desc: add Medion MD9806 scanner as - supported - -2005-10-14 Oliver Schwartz - - * backend/snapscan-options.c backend/snapscan-scsi.c - backend/snapscan.c backend/snapscan-sources.c: - Fixes for 16 bit scan mode from Simon Munton - -2005-10-11 Oliver Schwartz - - * backend/snapscan-options.c backend/snapscan-scsi.c - backend/snapscan.c backend/snapscan-sources.c: - Fixes for Epson 3490/3590 and 16 bit scan mode - -2005-10-11 Stephane Voltz - - * backend/umax_pp.c: change sane_start semantic to allow for batch - scanning - -2005-10-08 Henning Meier-Geinitz - - * doc/descriptions-external/mustek_a3p1.desc: Downgraded status to - minimal. - * doc/descriptions/mustek_usb2.desc: Added "new" marker. - -2005-10-06 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added HP ScanJet 3800c. - * frontend/scanimage.c: Use correct size for fgets. Patch from - Antoine Jacoutot . - -2005-10-05 Mattias Ellert - - * backend/microtek2.c: Off-by-one error - -2005-10-03 Henning Meier-Geinitz - - * AUTHORS acinclude.m4 configure configure.in backend/Makefile.in - backend/dll.conf backend/mustek_usb2.c backend/mustek_usb2.h - backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h - backend/mustek_usb2_high.c backend/mustek_usb2_high.h - backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c - doc/Makefile.in doc/sane-mustek_usb2.man - doc/mustek_usb2/mustek_usb2.CHANGES - doc/mustek_usb2/mustek_usb2.TODO: - Added mustek_usb backend which supports the Mustek BearPaw 2448 - TA Pro. Changes of the code before inclusion to CVS can be found - in doc/mustek_usb2/mustek_usb2.CHANGES. - * doc/sane.man: Added mustek_usb2. Added description for u12 - backend. Added missing links to other backends. - * doc/descriptions/mustek_usb2.desc: Moved from - descriptions-external. Updated. - * PROJECTS: Removed link to BeOS (link goes to nowhere, SANE - website has links to projects). Removed link to wi32 port - (included in SANE). Removed link to SaneTwain (listed on SANE - website). - * doc/doxygen-sanei.conf.in: Updated to current doxygen - version. Output more C-friendly format. - * include/sane/sanei.h include/sane/sanei_backend.h - include/sane/sanei_debug.h include/sane/sanei_pp.h - include/sane/sanei_usb.h: Fixed some bugs in doxygen - documentation. Added some comments. - -2005-10-02 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c: Bumped build number. - * backend/plustek-usbdevs.c backend/plustek-usb.h: Updated motor - settings for Canoscan LiDE25, thanks to Stephan February - for providing these values. - -2005-10-02 Henning Meier-Geinitz - - * doc/descriptions/as6e.desc: Added Trust Easy Scan 9600 Plus (bug - #301000). - * backend/sharp.c: Fixed some compilation warnings (bug #300404). - * AUTHORS: Fixed Rene Rebe's email address. - * doc/descriptions/unsupported.desc: Removed Epson Perfection 4180 - (supported by epkowa backend). - -2005-10-01 Henning Meier-Geinitz - - * doc/descriptions-external/mustek_a3p1.desc - doc/descriptions/unsupported.desc: Added external mustek_a3p1 - backend that supports Mustek P 3600 A3 Pro. - * tools/Makefile.in: Added udev to list of directories that are - part of the distribution. - * doc/descriptions.txt: Yet another "itsself". - * backend/sp15c.c: Fixed some warnings (bug #302290). - -2005-10-01 Julien Blache - * doc/sane-find-scanner.man: Typo fix, s/itsself/itself/ from - Alfie Costa. - -2005-09-29 Eddy De Greef - - * backend/mustek_pp_cis.c: Minor bug fix: wrong model name was - reported for 1200CP+ driver. - -2005-09-29 Henning Meier-Geinitz - - * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c - backend/gt68xx_generic.c backend/gt68xx_generic.h - backend/gt68xx_high.c backend/gt68xx_low.c backend/gt68xx_low.h - doc/sane-gt68xx.man doc/descriptions/gt68xx.desc - doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: - Added support for Plustek OpticSlim M12 (untested). Based on patch - from Gerhard Jaeger . Fixed gt68xx homepage - links in man page. Changed minimum version of libusb to 0.1.8. - * doc/descriptions/unsupported.desc: Removed Plustek OpticSlim M12. - -2005-09-28 Oliver Schwartz - - * backend/snapscan-options.c backend/snapscan-scsi.c - backend/snapscan.c backend/snapscan.h: - Added 16 bit option for Epson scanners, untested. - Reenabled enhanced inquiry command for epson scanners. - -2005-09-28 Julien Blache - * tools/udev/convert-usermap.sh: Don't print 0x when matching VID - and PID. - -2005-09-28 Julien Blache - * tools/udev/convert-usermap.sh: Added script to convert - hotplug/libsane.usermap to a udev rules file. udev 070 + linux - 2.6.14 will deprecate hotplug. - * tools/README: updated. - -2005-09-28 Henning Meier-Geinitz - - * doc/descriptions-external/brother.desc: Removed duplicate entry. - * doc/descriptions/genesys.desc: Added link to genesys homepage. - -2005-09-26 Henning Meier-Geinitz - - * tools/sane-find-scanner.c: Print more clear output if no USB - scanners are found. Point to manual page. Warn if libusb support - hasn't been built. - -2005-09-25 Henning Meier-Geinitz - - * doc/descriptions-external/lexmark.desc - doc/descriptions/unsupported.desc: Added external lexmark - backend. Moved Lexmark X11?? devices to lexmark.desc. Based on - patch from Fred Odendaal . - -2005-09-25 Oliver Schwartz - - * backend/snapscan-scsi.c: Removed debugging code for - Epson scanners until a working solution has been found. - -2005-09-23 Henning Meier-Geinitz - - * README: Mention in addition to the listed libraries, their - header files are also neccessary. A missing usb.h is a common - problem when building SANE (--> no USB support). - * configure configure.in: Added warning message that's printed - when libusb or its header file is not available. - * frontend/scanimage.c doc/scanimage.man: Added progress indicator - to scanimage (based on patch from Mario Goppold - ). Updated copyright information, added - links to sane-devel mailing list. - * sanei/sanei_usb.c: Ignore EBUSY from usb_set_configuration. This - function fails, if a different interface of the same device is - claimed (e.g. by usblp). - -2005-09-22 Mattias Ellert - - * backend/hp4200.c backend/umax.c backend/umax1220u.c - include/sane/sanei_pv8630.h sanei/sanei_pv8630.c: - Fix SANE_DEBUG_SANEI_PV8630 - -2005-09-19 Frank Zago - - * backend/dc210.c backend/leo.c backend/matsushita.c - backend/sceptre.c backend/sp15c-scsi.h backend/sp15c.h - backend/teco1.c backend/teco2.c backend/teco3.c - include/sane/sanei_backend.h: Replaced __unused__ with - __sane_unused__ to avoid a namespace conflict. - -2005-09-18 Henning Meier-Geinitz - - * backend/gt68xx.c backend/gt68xx_high.c - doc/descriptions/gt68xx.descdoc/gt68xx/gt68xx.CHANGES - doc/gt68xx/gt68xx.TODO: Fixed segfault that may happen with - Mustek ScanExpress A3 USB. - * doc/backend-writing.txt: Added some hints about number of - files. - * backend/mustek.conf doc/sane-mustek.man - doc/descriptions/mustek.desc: Mustek Paragon 600 II EP - works. Mentioned "parport0". - * doc/descriptions/unsupported.desc: Added Canon PIXMA MP750. - -2005-09-17 Mattias Ellert - - * README.darwin: New date for good libusb from CVS - -2005-09-07 Mattias Ellert - - * acinclude.m4, configure: fix disabling of locking when the - locking user group does not exist - -2005-09-07 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Genius ColorPage Slim - 1200. - -2005-09-07 Oliver Schirrmeister - - * backend/fujitsu.c: enabled dropoutcolor for all fi-* scanners. - Applied patch from Mario Goppold: Bugfixes for the M3092DCd - -2005-09-05 Henning Meier-Geinitz - - * po/sane-backends.ru.po: Updated Russian translation (from Vitaly - Lipatov ). - -2005-09-03 Oliver Schwartz - - * backend/snapscan.h backend/snapscan-scsi.c: (Hopefully) fixed - some debugging code for Epson scanners that only works after - firmware upload. - -2005-09-02 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Epson Perfection 4490 - Photo. - * tools/hotplug/libsane.usermap: Added HP PSC 750. - -2005-09-01 Henning Meier-Geinitz - - * backend/gt68xx.c backend/gt68xx_devices.c - backend/gt68xx_generic.c backend/gt68xx_high.c - doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Genius - ColorPage Vivid 1200 X is reported to work. Genius ColorPage Vivid - 4 XE seems to be the same as 4 X, it just doesn't have - buttons. Cleanup of .desc file. Fixed gain setting. Mustek - ScanExpress A3 USB 600 dpi color scanning works now. - * tools/check-usb-chip.c: Added detection for SQ113 chip - (e.g. Mustek BearPaw 2448 TA Pro). - -2005-08-31 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Removed Mustek 1800 A3 Pro - (this is actually a P3600 A3 Pro). - * doc/descriptions-external/mustek_usb2.desc: Mustek BearPaw 2448 - TA Pro has status "good" now. - -2005-08-30 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Removed Mustek BearPaw 2448 - TA Pro (now supported by external Mustek USB2 backend). Added - comments about that backend to some other scanners that may be - supported later. - * doc/descriptions-external/mustek_usb2.desc: New external Backend - for Mustek BearPaw 2448 TA Pro. - -2005-08-29 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Canon LiDE 60 is GL841 based. - -2005-08-28 Henning Meier-Geinitz - - * doc/descriptions/canon630u.desc: Changed status of Canon 636u - too "good". - -2005-08-27 Henning Meier-Geinitz - - * doc/descriptions-external/brother2.desc: Brother MFC-5440CN is - reported to work (bug #302105). - -2005-08-24 St~hane Voltz - - * backend/umax_pp.c backend/umax_pp_low.c tools/umax_pp.c: Added EPP - support for 610P, revision number changes - -2005-08-23 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Canon LiDE 60. Reflecta - Digitdia 3600 is not GL841-based. - -2005-08-22 St~hane Voltz - - * tools/check-usb-chip.c: Added rts8858c detection (Lexmark - X1100 series, Dell A920). - -2005-08-22 Henning Meier-Geinitz - - * tools/hotplug/libsane.usermap: Added some Genius scanners. Fixed - Visioneer Onetouch 7300 USB. Added Plustek OpticSlim 2400. - * README.openbsd: Mention problems with library names. - -2005-08-22 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c: Bumped build number. - * backend/plustek-usb.c backend/plustek-usbscan.c: Fixed problem, - when trying to scan at resolutions beyond the optical one - (sensor stops too early). - * tools/hotplug/libsane.usermap: Added USB ID for LiDE25. - -2005-08-21 Henning Meier-Geinitz - - * doc/descriptions/microtek2.desc - doc/descriptions/unsupported.desc: Marked microtek2 backend as - unsupported. Changed link to point to old website directly. Listed - Microtek ScanMaker 9800XL as supported (bug #301515). - -2005-08-21 Mattias Ellert - - * ltmain.sh acinclude.am configure: Updated from libtool 1.5.18. - -2005-08-20 Henning Meier-Geinitz - - * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c - backend/gt68xx_low.h doc/descriptions/gt68xx.desc - doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: - Increased number limit of scanners that can work with this - backend to 50. Added support for Genius ColorPage Vivid 1200 X - (untested). - -2005-08-19 Henning Meier-Geinitz - - * configure configure.in: Fixed check for usbcalls.h on OS/2 - (patch from Paul Smedley ). - * backend/gt68xx.c backend/gt68xx_devices.c doc/descriptions/gt68xx.desc - doc/gt68xx/gt68xx.CHANGES: Enabled GT68XX_FLAG_NO_STOP for - Mustek BearPaw 2400 CU Plus. Some of these scanners don't seem - to like that command. - * doc/descriptions/artec_eplus48u.desc: Disabled link to backend - homepage which doesn't seem to contain anything sane-related. - -2005-08-19 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek-usb.h backend/plustek-usbdevs.c: Removed obsolete - _WAF_BLACKFINE. LiDE20 does not seem to have a reliable black - calibration area, so the devices now will switch off the lamp - for dark calibration. - * backend/plustek-usbcal.c backend/plustek-usbscan.c: Cleanup. - * backend/plustek-usbshading.c: Fixed line statistics and added - calibration data output. - * backend/plustek.c: Bumped build number. - -2005-08-18 Henning Meier-Geinitz - - * backend/gt68xx.c backend/gt68xx_low.c backend/gt68xx_low.h - doc/sane-gt68xx.man doc/descriptions/gt68xx.desc - doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: - Fixed the problem concerning scanning on *BSD. Scanning only - worked once (bug #300597). Fixed compilation warnings. - -2005-08-17 Henning Meier-Geinitz - - * README: Min. libusb version is 0.1.8. - -2005-08-17 Julien Blache - - * tools/hotplug/libsane.usermap: Added USB IDs for the - sm3600-supported scanners. If you know the exact model name - corresponding to the above IDs, please mail sane-devel: - 0x05da/0x40b3, 0x05da/0x40b8, - 0x05da/0x40ca, 0x05da/0x40dd, 0x05da/0x40ff - -2005-08-16 Oliver Schwartz - - * backend/snapscan-scsi.c: Make compileable ;-) - * backend/snapscan-options.c: Removed //-style comment - -2005-08-16 Henning Meier-Geinitz - - * doc/descriptions/unsupported.desc: Added Canon PIXMA MP780 and - Lexmark P6250. - * tools/sane-find-scanner.c: Don't print anything else but the - found messages in "-q" mode. - * tools/check-usb-chip.c: Added check for combination of a - PowerVision PV8630 (USB->parport bridge) and National - Semiconductor LM9830 as used in the HP 4200. Fixed compilation - warning. Added check for Toshiba M011 chips as used in Microtek - ScanMaker 3600, 3700, and 3750. - * configure configure.in backend/Makefile.in backend/sm3600-scanusb.c - backend/sm3600-scanutil.c backend/sm3600.c backend/sm3600.h - doc/sane-sm3600.man doc/sane-usb.man: - Removed direct dependence of sm3600 on libusb. Used sanei_usb - instead. Based on patch from Fran~is Revol . - Updated documentation accordingly. Fixed compilation warnings. - -2005-08-15 Oliver Schwartz - - * backend/snapscan.c: Bumped version number - * backend/snapscan-scsi.c: Added temporary debug code for 2480/2580 - distinction - -2005-08-15 Oliver Schwartz - - * backend/snapscan.c backend/snapscan-options.c backend/snapscan-scsi.c - backend/snapscan.h doc/descriptions/snapscan.desc - backend/snapscan.conf: Added support for Epson Perfection 3490/3590 - (thanks to Matt Judge). - -2005-08-15 Gerhard Jaeger - - * doc/plustek/Plustek-USB.changes: Update. - * doc/descriptions/plustek.desc: Updated version number. - * backend/plustek.h. backend/plustek-usb.h backend/plustek-usbcalfile.c - backend/plustek-usbimg.c backend/plustek-usbmap.c - backend/plustek-usbdevs.c backend/plustek-usbscan.c: Cleanup. - * backend/plustek.c: Bumped version and build number. - Activated IPC between reader-process and parent. - * backend/plustek-usbio.c: usbio_DetectLM983x() now returns error if - register could not be red, usbio_ResetLM983x() checks for reg7 - value before writing. - * backend/plustek-usbhw.c: Added button support for Plustek/Genius - devices. Changed behaviour of usb_IsScannerReady(). - Added special misc I/O setup for CIS devices (usb_ResetRegisters). - * backend/plustek-usb.c: Minor fix for startup reset. - Removed unnecessary calls to usbio_ResetLM983x(). - * backend/plustek-usbshading.c: Readded kCIS670 to add 5% extra to - LiDE20 fine calibration. - * backend/plustek-usbcal.c: Tried to use the settings from SANE-1.0.13. - Added _TWEAK_GAIN to allow increasing GAIN during lamp coarse - calibration. Added call to speedtest function. - -2005-08-14 Henning Meier-Geinitz - - * Makefile.in: Added Changelog-1.0.16 to DISTFILES. - * backend/hp4200.c doc/sane-hp4200.man - doc/descriptions/hp4200.desc: Enabled backtracking by - default. This is slower but avois bumping the scan head at the end - of the scan area and also missing parts of the scanned - image. Increased safety margin for backtracking. This fixes the - "garbled image" bug. Set default gamma value to 2. Manpage - update. Status set to "basic". - * frontend/scanimage.c: Don't exit with error when trying to set - inactive options. This especially happens in connection with - geometry options and the v4l backend (bugs #300321, #301977). - -2005-08-13 Henning Meier-Geinitz - - * doc/descriptions/niash.desc doc/descriptions/sm3840.desc: - Removed ":new". - * AUTHORS configure configure.in backend/Makefile.in - backend/dll.conf backend/hp4200.c backend/hp4200.conf - backend/hp4200.h backend/hp4200_lm9830.c - backend/hp4200_lm9830.h doc/Makefile.in - doc/sane-hp4200.man doc/sane.man - doc/descriptions/hp4200.desc: Added hp4200 backend. Code from - Julien BLACHE's sane-backends-extras debian package, based on - Frank Zago's patches based on Adrian Perez Jorge's code. Fixed - compilation warnings. Fixed bug when no sane device was - given. Code indented by indent -gnu. Added man page. - * doc/descriptions-external/hp4200.desc: Removed (backend is now - included). - * configure configure.in: Moved CPPFLAGS definition down to avoid - problems with libtool tests for -fPIC. - -2005-08-10 Gerhard Jaeger - - * backend/plustek_pp.c: Bumped build number. - * backend/plustek_pp-genericio.c: Fixed bug, that causes ASIC96003/1 - based devices to move their sensors too fast in lineart mode at - 200 and 300dpi. - * doc/plustek/Plustek-PARPORT.changes: Update. - -2005-08-09 Henning Meier-Geinitz - - * sanei/sanei_usb.c: Minor fixes for usbcalls interface (patch - from Paul Smedley ). - * doc/descriptions/unsupported.desc: Added Hewlett-Packard Scanjet - 4370. - -2005-08-08 Gerhard Jaeger - - * acinclude.m4 configure: Locking feature will be disabled on OS/2 - per default (according to Paul Smedley ). - * doc/plustek/Plustek-USB.changes: Update. - * backend/plustek.c: Bumped build number. - * doc/plustek/Plustek-USB.txt doc/descriptions/plustek.desc - doc/sane-plustek.man backend/plustek-usb.c backend/plustek-usbdevs.c: - Added support for CanoScan LiDE25. - -2005-08-07 Oliver Schwartz - - * backend/snapscan.c: Use first known device if no explicit device name - is specified - -2005-08-07 Henning Meier-Geinitz - - * configure configure.in: Updated version. Enabled compilation - warnings. - * doc/releases.txt: Typo fix. - * config.guess config.sub: Updated from libtool 1.5.18. - * configure configure.in include/sane/config.h.in - sanei/sanei_usb.c: Added support for usb functionality on OS/2 - using the usbcalls interface (patch from Paul Smedley - ). - * sanei/sanei_usb.c: Fixed some compilation warnings. - -Older entries can be found in ChangeLog-1.0.16. -- cgit v1.2.3