From 58912f68c2489bcee787599837447e0d64dfd61a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 24 May 2017 21:03:56 +0200 Subject: New upstream version 1.0.27 --- ChangeLog-1.0.5 | 1194 ------------------------------------------------------- 1 file changed, 1194 deletions(-) delete mode 100644 ChangeLog-1.0.5 (limited to 'ChangeLog-1.0.5') diff --git a/ChangeLog-1.0.5 b/ChangeLog-1.0.5 deleted file mode 100644 index 9c0a992..0000000 --- a/ChangeLog-1.0.5 +++ /dev/null @@ -1,1194 +0,0 @@ -2001-07-01 Oliver Rauch -************************ end of code freeze *********************************** -************************ Release of sane-backends 1.0.5 ********************** - - -2001-06-30 Henning Meier-Geinitz - - * configure configure.in: Disabled warnings by default. - * NEWS: Updated version numbers, added dc25. - -2001-06-25 Oliver Rauch - - * configure.in/configure: changed version to 1.0.5 - -2001-06-25 ********** CODE FREEZE FOR SANE-1.0.5 - snapshot sane-backends-pre1-1.0.5 - planned release on 2001-07-01 - - -2001-06-24 Oliver Rauch - - * backend/umax*: bugfixes: - * bugfix for DOR: - - bottom-right edge keeps in position if possible when DOR is switched on - - * bugfix for Astra 610S color mode: - - scale_y is set to 0.5 if y_resolutions is smaller than optical_res/2 - this does fix the color scan problems for Astra 610S. - Not tested for Astra 600S. - -2001-06-20 Peter Fales - - * backend/dc25.c - Backed out the previously added mkdtemp() - patch, as mkdtemp is not available on all platforms. - * TODO: Removed entry about dc25 bug - -2001-06-20 Henning Meier-Geinitz - - * TODO: Updated documentation entries. Added compilation bug in dc25.c. - -2001-06-20 Stéphane Voltz - - * doc/sane-umax_pp.man: corrections according to the TODO list - ---- cvs snapshot-2001-06-17 --- - -2001-06-17 Oliver Rauch - - * backend/umax*: bugfixes: - - removed "#include " from umax.c: assert() is never called - - bugfix for 3 pass scanning: - reposition_scanner is called in sane_start for 2nd and 3rd pass of 3 pass scan - - bugfix for UTA and DOR geometry offsets - -2001-06-14 Peter Fales - - * backend/dc25.c - Added a patch from Tim Waugh to use mkdtemp() - instead of mktemp(). Also cleaned up some compiler warnings. - -2001-06-14 Karl Heinz Kremer - - * doc/sane-epson.man: Removed reference to sane-devel list - -2001-06-14 Simon Munton - * doc/sane-pie.man: Fixed formatting problems - -2001-06-14 Gerhard Jaeger - - * doc/sane-plustek.man: - Corrected URL to Plustek mailing list - -2001-06-14 Henning Meier-Geinitz - - * TODO: Added link to libieee1284. - -2001-06-13 Karl Heinz Kremer - - * backend/epson.desc: Added GT-9500 (same scanner as Expression 636) - * backend/epson.c: Finally updated version # - -2001-06-13 Henning Meier-Geinitz - - * TODO: Updated the entries about documentation. - -2001-06-13 Oliver Rauch - - * sanei/sanei-scsi.c: Corrected bug in sanei_scsi_cmd2 for IRIX: - - scsi_req.ds_senselen has been set to sizeof pointer, is set - to 128 bytes now (1024 bytes does not work) - - sensebuf is cleared before scsi command is executed - - sensehandle always called when it exists and an error occurs - -2001-06-11 Henning Meier-Geinitz - - * tools/umax_pp.c: Also use sanei_umax_pp_SetLamp() (patch from - Tim Waugh ). - -2001-06-11 Stéphane Voltz - - * backend/umax_pp_low.c backend/umax_pp_low.h backend/umax_pp_mid.c: - make use of PPGETMODES only when available in ppdev.h. Corrected OS/2 - typo in Outb() and rename sanei_umax_pp_Lamp() to - sanei_umax_pp_SetLamp(). - - -2001-06-05 Peter Fales - - * backend/doc/sane-dc25.man, sane-dc210.man, sane-dc240.man - - Added reference to web page for information about sane - mailing list - -2001-06-10 Jochen Eisinger - * doc/sane-mustek_pp.man: added pointer and note to list - subscription page - ---- cvs snapshot-2001-06-10 --- - -2001-06-10 Henning Meier-Geinitz - - * doc/sane-artec.man doc/sane-coolscan.man doc/sane-umax.man: - Fixed whatis/apropos output (don't put an empty line after - the NAME section). Added SEE ALSO entry to sane(7). - * doc/sane-dll.man: Fixed output bug and added SEE ALSO entry. - * doc/sane-scsi.man: Rephrased the paragraphs about Linux sg - buffer to make it clear, that kernel changes are really only - necessary with older kernels. Fixed torque.net URL. Added comment, - that usually every SCSI adapter should work. Added paragraph about - problems with Acard adapters. Rephrased NCR810 entry. - * doc/sane-net.man: Updated BUGS section. Added SEE ALSO. - * doc/saned.man doc/sane-abaton.man doc/sane-agfafocus.man - doc/sane-apple.man doc/sane-as6e.man doc/sane-avision.man - doc/sane-bh.man doc/sane-dc210.man doc/sane-dc240.man - doc/sane-dc25.man doc/sane-dmc.man doc/sane-epson.man - doc/sane-fujitsu.man doc/sane-hp.man doc/sane-microtek.man - doc/sane-mustek_pp.man doc/sane-nec.man doc/sane-pie.man - doc/sane-pint.man doc/sane-plustek.man doc/sane-pnm.man - doc/sane-qcam.man doc/sane-ricoh.man doc/sane-s9036.man - doc/sane-sharp.man doc/sane-sm3600.man doc/sane-st400.man - doc/sane-tamarack.man doc/sane-umax_pp.man doc/sane-v4l.man: - Added SEE ALSO entry for sane(7). - * doc/sane-coolscan.man: Used @@ macros instead of fixed paths. - * doc/sane-dc210.man doc/sane-dc240.man doc/sane-dc25.man: - Used @@ macros instead of fixed paths. Fixed library paths. - * doc/Makefile.in doc/sane-coolscan.man doc/sane-dc210.man - doc/sane-dc240.man doc/sane-dc25.man: Set the correct library - path for all backends by changing @LIBDIR@ to $(libdir)/sane. - * doc/sane-as6e.man doc/sane-canon.man doc/sane-microtek.man - doc/sane-microtek2.man: Some minor formatting issues. - * doc/sane-mustek.man doc/sane-v4l.man: Added link to mostang mail - page. Fixed some formatting issues. - * doc/backend-writing.txt: Added paragraph about @LIBDIR@ and friends - in manual pages. - * TODO: Added several entries about manual pages. Removed entry about - sane(7). - -2001-06-09 Oliver Rauch - - * sanei/sanei_scsi.c: - applied patch by Douglas Gilbert - that solves compilation problem about: - storage size of `ssid' isn't known - -2001-06-09 Karl Heinz Kremer - - * backend/epson.c: Changed debug level for for an informational - message in the sense_handler from 0 to 2. - -2001-06-09 Henning Meier-Geinitz - - * README.os2: Added link to Franz Bakan's web page. - * configure configure.in backend/Makefile.in include/sane/config.h.in: - Check for sys/sem.h and disable snapscan if it isn't available. - Removed "//" (C++-style comment) from config.h.in. Link to djpeg - only once. - * TODO: Added comment on command line option for timeout in saned. - -2001-06-09 Petter Reinholdtsen - - * acinclude.m4 include/sane/config.h.in: Fix configure/compile - problem on Alpha/Tru64 Unix. - -2001-06-07 Stéphane Voltz - - * backend/umax_pp_low.c: make use of PPGETMODES to get ppdev - capabilites. - -2001-06-05 Peter Fales - - * backend/dc240.c - Fixed bug where attempting to change the - "image number" in an empty camera causes a core dump. - -2001-06-06 Stéphane Voltz - - * backend/umax_pp_low.c: OS/2 compile fixes (again). Backend - successfully built on Warp with EMX 0.9d. - -2001-06-06 Stéphane Voltz - - * backend/umax_pp_low.c: OS/2 compile fixes - -2001-06-05 Oliver Rauch - - * changed my email address in sane-backends.lsm - - ---- feature freeze for sane-1.0.5 is active --- ---- cvs snapshot-2001-06-05 --- - -2001-06-04 Oliver Rauch - - * update of umax backend to version 1.0 buid 27 - -2001-06-04 Henning Meier-Geinitz - - * TODO: Updated the entries concerning net+saned. Removed the - exporting symbols entry. Added entry about lassert.h. - * include/lassert.h sanei/sanei_scsi.c: Use local assert.h file to - fix problems with AIX and shared libraries. - * frontend/test.c: Changed order of headers to get test.c compiling - on OS/2. - * frontend/.cvsignore: Added test. - * frontend/saned.c: Increase timeout to one hour. - * backend/coolscan.c: Declared all internal functions static. - * tools/Makefile.in: Fixed typo that prevented make from removing - mustek600iin-off. - * sanei/sanei_scsi.c: Fixed some small bugs concerning error reporting. - * frontend/scanimage.c: Fixed small bug in output for batch mode. - -2001-06-03 Peter Fales - - * backend/dc240.c - Batch scanning of multiple images with scanimage - was failing if subsequent images have a different size than - from the first image. - -2001-06-03 Karl Heinz Kremer - - * doc/sane-epson.man: Updated documentation - -2001-06-03 Stéphane Voltz - - * backend/umax_pp_low.c: Fixed compile problem on archs that - have inb/outb and not insb/outsb. Cleaned up and simplified probing - code. - -2001-06-03 Peter Fales - - * backend/dc240.c - Add "auto increment" option to allow all - images to be downloaded with the --batch option to scanimage. - -2001-06-03 Henning Meier-Geinitz - - * backend/mustek.c: Added some debug messages. - * backend/net.c: Fixed yet another segfault. Added debug messages. - * frontend/scanimage.c doc/scanimage.man: Added more options for - batch-scanning (patch from Caskey Dickson - ). - -2001-06-02 Chris Pinkham - - * backend/artec.desc: updated version number to match artec.c. - -2001-06-02 Oliver Rauch - - * corrected umax version numver in umax.desc (1.0.24->1.0.26) - -2001-06-02 Henning Meier-Geinitz - - * NEWS: Updated concerning backend versions. - * TODO: Removed nec entries. Added entry about ADF extension to - scanimage. - * backend/qcam.c: Another occurence where struct flock must be defined - for OS/2. - * AUTHORS: Fixed Kazuya Fukuda's name and email address. - * backend/nec.c backend/nec.h backend/nec.desc: Update to backend - version 0.12 (from Kazuya Fukuda ). - Removed references to sharp backend (grep for "JX"). Check for - HAVE_SYS_SHM_H before including sys/shm.h and disable shared - memory support if necessary. Free devlist allocated in - sane_get_devices() in sane_exit() resolution setting bug fixed - (PC-IN500/4C 10dpi step). Removed resolution list. - -2001-06-02 Oliver Rauch - - * changed minimum scsi buffer size from 64KB to 32KB - - -2001-06-01 Henning Meier-Geinitz - - * backend/umax_pp_low.c: Fixed the FreeBSD problems by checking - /dev/io before accessing io ports (patch from Stéphane Voltz - ). - * backend/snapscan.c: Fixed two bugs: pss->devname must be checked - for 0. Return total number of lines in sane_get_parameters (patch - from Ben Stanley ). - -2001-05-31 Henning Meier-Geinitz - - * backend/mustek.c: Updated some comments. - * TODO: Removed the entry about the config_line[len-1] bug. - * configure configure.in include/sane/config.h.in backend/qcam.c: - Check for struct flock and define it if necessary. - * tools/Makefile.in: Make sure that backend/umax_pp_low.o exists - when umax_pp.o is linked. - * backend/bh.c backend/m3096g.c backend/sp15c.c: Fixed - config_line[len-1] bug which could generate an access violation - if len==0. - * lib/alloca.c lib/getnev.c lib/getopt.c lib/getopt1.c - lib/isfdtype.c lib/md5.c lib sigprocmask.c lib/snprintf.c lib - strdup.c lib/strndup.c lib/strsep.c lib/usleep.c lib/vsyslog.c: - Used #include "../include/sane/config.h". - * sanei/sanei_scsi.c: Fixed compilation issue for OS/2 in - sanei_scsi_find_devices. - ---- cvs snapshot-2001-05-30 --- - -2001-05-30 Marian Eichholz - - * backend sm3600 with better gain calibration incorporated. - fixed a superfluceous export. - -2001-05-30 Oliver Rauch - - * Problem with SOLARIS_INTERFACE (change from 2001-05-27) - had an other reason than the scsi buffer size (MAX_DATA). - Changed scsi buffer size for solaris sg driver - (USE == SOLARIS_INTERFACE in sanei_scsi.c) again from 32 KB - to 128KB. - -2001-05-30 Henning Meier-Geinitz - - * tools/Makefile.in: Fixed umax_pp compilation problem with Solaris - and other operating systems. - -2001-05-29 Henning Meier-Geinitz - - * backend/canon.conf doc/sane-canon.man: Added config file and some - documentation for it. - * AUTHORS: Added Chris Bagwell and Oliver Schwartz for snapscan. - * TODO: Added entry about possible sanei_usb.*. - -2001-05-29 Peter Fales - - * backend/dc240.c - Fixed a fairly obscure problem that can result in - core dump. (Deleting pictures with gphoto, then launching - xscanimage without power cycling the camera left bad data in the - camera status table.) - -2001-05-29 Oliver Rauch - - * added entry about sanei_parport in TODO - -2001-05-27 Henning Meier-Geinitz - - * doc/releases.txt: Removed comment about net.* and dll.* version - updating. Added info about make install-mostang. - * TODO: Updated concerning backend bugs (export and config_line). - * backend/umax_pp_low.c: Fixed bus error with FreeBSD. - -2001-05-27 Oliver Rauch - - * changed scsi buffer size for solaris sg driver - (USE == SOLARIS_INTERFACE in sanei_scsi.c) to 32 KB - again because it does not work for at least one system - with 64KB. - -2001-05-27 Petter Reinholdtsen - - * doc/releases.txt: Added points on tagging the source and - generating a diff from the last release. - ---- cvs snapshot-2001-05-27 --- - -2001-05-27 Oliver Rauch - - * sanei/sanei_scsi.c: changed scsi buffer size (MAX_DATA) - to 128KB for: SOLARIS_INTERFACE, SOLARIS_SG_INTERFACE, - SOLARIS_USCSI_INTERFACE and IRIX_INTERFACE - (some scanners have problems with the predefined 32KB - buffer size, these systems should work with 128KB - but we need to test if no problems do occur). - -2001-05-27 Henning Meier-Geinitz - - * doc/sane-microtek2.man: Include updates from backend version 0.9 - (from karsten.festag@t-online.de (Karsten Festag)). - * backend/sm3600.c: setResolutions has only 5 instead of 6 resolutions. - -2001-05-26 Jochen Eisinger - - * backend/mustek_pp.c: declared function comp() static - * TODO: removed entry regarding this problem - -2001-05-26 Chris Pinkham - - * backend/artec.c: Added code in sane_exit() to free memory - malloced in sane_get_devices(). Declared several functions - 'static' so they are not exported. - * TODO: removed 'artec' backend from list mentioned in describing - above problems. - -2001-05-26 Petter Reinholdtsen - - * TODO: Updated entry on library search path, sanei API - documentation and sane_init() return value. - - * Makefile.in:New target 'libcheck' making sure libraries export - only sane_* and sanei_* symbols. - -2001-05-26 Henning Meier-Geinitz - - * TODO: Removed snapscan and microtek2 updates. Removed status change of - as6e. Removed True64 Unix and HP/UX compilation problems. Added entry - about exporting symbols. Reformatted some entries. - * backend/microtek2.c backend/microtek2.desc backend/microtek2.h: - Updated to version 0.9 (from Karsten Festag - ). - * doc/sane-snapscan.man: Added new scanners and authors. - * AUTHORS: Added Sebastien Sable and Henrik Johansson. - * backend/snapscan-scsi.c backend/snapscan-sources.c - backend/snapscan-sources.h backend/snapscan-usb.c - backend/snapscan-usb.h backend/snapscan.c backend/snapscan.conf - backend/snapscan.desc backend/snapscan.h: Updated snapscan backend to - version 1.2 (from Sebastien Sable ). - * doc/backend-writing.txt: Added "make libcheck" info. - * backend/sm3600-color.c backend/sm3600-gray.c backend/sm3600-homerun.c - backend/sm3600-scanmtek.c backend/sm3600-scanusb.c - backend/sm3600-scanutil.c backend/sm3600.c backend/sm3600.h: - Made all non-sane-api functions static. Fixed some warnings. - * backend/sm3600.desc: Changed status to new. - * backend/as6e.desc: Changed status to alpha because backend - isn't new any more. - * acinclude.m4 aclocal.m4 configure configure.in - include/sane/config.h.in: Fixed u_int* bug for Tru64 by - including sys/bitypes.h. - * PROJECTS: Added hpoj project. - -2001-05-25 Jochen Eisinger - - * doc/sane-mustek_pp.man, backend/mustek_pp.desc: Changed URL - of the homepage to home.nexgo.de/jochen.eisinger/sane/ - -2001-05-25 Karl Heinz Kremer - - * backend/epson.c: Allow more than 8 bit color depth even for - preview mode since Xsane can handle this. Some code cleanup. - Removed ancient code that was used to determine the resolution - back when the backend still had a slider for the resolution - selection. - * backend/epson.desc: Updated version number, added new scanners. - -2001-05-24 Henning Meier-Geinitz - - * sane-mustek.man: Removed some bug descriptions and addded - sane(7) to SEE ALSO. - * sane-find-scanner.man sane-scsi.man scanimage.man: Added - sane(7) to SEE ALSO. - * PROJECTS: Removed entry about Polaroid SprintScan 35LE (now in - microtek). - * TODO: Removed umax from lists of backends with sane_get_devices - and config_line bug. Removed entry about make uninstall and - sanei_wire.c bug. Removed entry about microtek update. Added point - about adding sane(7) to any manual page. - -2001-05-23 Matto Marjanovic - - * backend/microtek.c backend/microtek.h: - o Added support for Agfa StudioStar (weird pixel packing) - o A couple of small fixes (missing 'static' declarations) - o Upped version to 0.12.3 - -2001-05-23 Matto Marjanovic - - * backend/microtek.c backend/microtek.h: Small fixes: - o Use 'expanded contrast/exposure settings' inquiry data to - dynamically set ranges for those options. - o Patches for Polaroid SprintScan 35LE (from Dick Bruijn) - - added "Polaroid" vendor string - - screwed around with 'brightness' setting - - attached 'negative scan' button - o sane_exit() now frees the devlist allocated by sane_get_devices() - o upped version to 0.12.2 - -2001-05-23 Stéphane Voltz - - * backend/umax_pp.c: changed option names to use lower case characters - and dashes instead of spaces. - - * backend/umax_pp_low.c: commented out a useless command sequence. - Added 55 AA pattern escaping in data block sending. - -2001-05-22 Karl Heinz Kremer - - * backend/epson.c: Added sense handler to support the GT-8000 scanner. - Also added experimental (and #ifdef protected) USB scanner probing - code - requires patch to USB scanner driver. - -2001-05-21 Henning Meier-Geinitz - - * README: Added "man sane" to quick install. Added paragraph about - old versions. Added paragraph about "make clean" and "make - distclean". Added section about removing SANE. - * Makefile.in backend/Makefile.in doc/Makefile.in lib/Makefile.in - sanei/Makefile.in tools/Makefile.in: Added target "uninstall". - -2001-05-20 Oliver Rauch - - * removed a bug in saned (patch by Matthias Trute ) - calculation of the reader buffer index was not correct: - if (reader >= sizeof (buf)) - - reader = 0; - + reader -= sizeof(buf); - -2001-05-19 Karl Heinz Kremer - - * backend/epson.c: fixed dates in change log entries - and finally fixed the TPU bug with older scanners - -2001-05-17 Oliver Rauch - - * removed bug in umax backend sane_exit - -2001-05-17 Henning Meier-Geinitz - - * include/lalloca.h: Used a more suitable comment. - * doc/backend-writing.txt: Reformated. Added point about headers - and libraries that are not available on every system and inclusion - of backends into CVS. Some minor fixes and clarifications. - * NEWS: Updated concerning sane man page and new backends. - -2001-05-17 Oliver Rauch - - * updated umax backend to version 1.0 build 26 - -2001-05-15 Peter Fales - - * backend/dc25.c, backend/dc240.c - Added DBG(1,..) to print - version string - -2001-05-16 Henning Meier-Geinitz - - * doc/.cvsignore: Added sane-sm3600.5. - - * PROJECTS: Removed sm3600. - - * TODO: Updates concerning memory leaks and access violations. - - * AUTHORS doc/Makefile.in: doc/sane-sm3600.man doc/sane.man: Updated - documentation concerning sm3600 backend and added man page (from - from Marian Eichholz ). - - * configure configure.in include/sane/config.h.in: Detect presence - of libusb and enable sm3600 backend. - - * backend/Makefile.in backend/dll.c backend/sm3600-color.c - backend/sm3600-homerun.c backend/sm3600-scantool.h - backend/sm3600-scanutil.c backend/sm3600.desc - backend/sm3600-gray.c backend/sm3600-scanmtek.c - backend/sm3600-scanusb.c backend/sm3600.c backend/sm3600.h: - Added sm3600 backend (from Marian Eichholz ). - -2001-05-16 Chris Pinkham - - * backend/artec.c: changed #include to use "../include/sane/config.h" - instead of "sane/config.h". - -2001-05-16 Stéphane Voltz - - * backend/umax_pp.c: fix memory leak in sane_exit - - * backend/umax_pp_low.c backend/umax_pp_low.h : added /proc parsing - when available to get I/O addr. Added pauses in 610P probe - sequence. - -2001-05-14 Henning Meier-Geinitz - - * frontend/scanimage.c: scanimage_exit: use the handle (not its - address) for sane_close. Fixed yet another warning. - -2001-05-14 Gerhard Jaeger - * backend/plustek.c: - Free memory malloced in sane_get_devices() in sane_exit() - -2001-05-14 Petter Reinholdtsen - - * backend/lhii.desc: Updated with current version and contact - information. - - * frontend/scanimage.c tools/sane-find-scanner.c: Remove some - compiler warnings. - -2001-05-13 Peter Fales - * backend/dc25.c: Remove DBG(0,...) line that was getting printed - for non-dc25 users. - -2001-05-13 Karl Heinz Kremer - - * backend/epson.c: Removed check for '\n' before end of line - Free memory malloced in sane_get_devices() in sane_exit() again - Check first if the scanner does support the set film type - and set focus position before the GUI elements are displayed. - This caused problems with older (B4 level) scanners when a TPU - was connected. - -2001-05-13 Henning Meier-Geinitz - - * doc/sane.man: Added path to sane.ps. Added comments about - how somebody can help the SANE project. Added comments about - possible problems with old installaitions of SANE and - /etc/ld.so.conf. Added section "REPORTING BUGS". - * tools/Makefile.in tools/.cvsignore: Added mustek600iin-off. - * sanei/sanei_codec_ascii.c tools/mustek600iin-off.c - tools/sane-find-scanner.c frontend/stiff.c: Used #include - "../include/sane/...". - * backend/net.c backend/net.h backend/net.desc: Fixed some memory - leaks. A bit of reformating. Added more debug output. Used - #include "../include/sane/...". - * sanei_codec_bin.c sanei/sanei_net.c sanei/sanei_wire.c: Fixed - some memory leaks. Used #include "../include/sane/...". - * frontend/scanimage.c: Added exit handler to call sane_close - and sane_exit in any case and to free alloced memory. A bit of - reformating. Used #include "../include/sane/...". Fixed some - warnings. - * frontend/saned.c: Fixed some memory leaks. Fixed some warnings. - Some reformating. Used #include "../include/sane/...". - * README.hp-ux: Use gmake if make doesn't work. - * LEVEL2: Added point about sane_init results != SANE_STATUS_GOOD. - * TODO: Added entries about memory leaks, sane_init return values, and - HP-UX problems in isfdtype.c. - -2001-05-11 Jochen Eisinger - - * TODO, backend/mustek_pp.c: fixed line-end handling, removed entry - from TODO list - -2001-05-11 Henning Meier-Geinitz - - * TODO: Removed pie from lists of bugs. Removed sane manual page. - Added some context to the Tru64 problems. - -2001-05-09 Henning Meier-Geinitz - - * doc/.cvsignore: Added sane.7. - * README: Removed content that's now in the sane maual page. - Added reference to man sane. - * doc/Makefile.in doc/sane.man: Added SANE manual page. - * doc/sane.tex: Clarified the paragraph concerning sane_read. If - *len != 0 the status must be SANE_STATUS_GOOD. - -2001-05-08 Simon Munton - * backend/pie.c: Free devlist in sane_exit. Removed redundant check for - trailing newline in config file. - -2001-05-07 Peter Fales - * backend/dc25.[ch]: Cleaned up compiler warnings and fixed (very - minor) memory leak. - -2001-05-07 Oliver Rauch - * applied a patch by Douglas Gilbert to sanei_scsi.c - it solves the Problem that the scanner is not - found on linux systems when the order of the - scsi devices is not coverd by the order of - devices listed by /proc/scsi/scsi, it prefers - new kernel 2.4 methods when available - -2001-05-06 Henning Meier-Geinitz - - * backend/mustek.c doc/mustek/mustek.CHANGES: Free devlist - in sane_exit. - * TODO: Updated concerning config_line[len - 1] stuff. Added - some (most) backends to list of sane_get_devices leak. - * backend/dll.c backend/dll.desc: Removed access to uninitialized - memory. Increased version number. - * backend/net.c backend/net.desc: Removed access to uninitialized - memory. Changed htons to ntohs in DBG statement. Free devlist - in sane_exit. Use "../include/sane/...". Increased version number. - -2001-05-04 Gerhard Jaeger - * backend/plustek.c: Applied Petters' patch to avoid an - illegal memory access - -2001-05-04 Henning Meier-Geinitz - - * NEWS: Updated. - * PROJECTS: Removed umax_pp. Added Canon FB620S and FS2710 backend. - * TODO: Removed entry about umax_pp and comment about testing - for existing sane installations and plustek memory access violation. - Added Canon FB620S and FS2710 backend and entries about Tru64 - compilation problems and installation procedure for translations. - * doc/backend-writing.txt: Added entries about SANE_I18N() and - documentation directories. - -2001-05-03 Henning Meier-Geinitz - - * AUTHORS README: Updated concerning umax_pp. - - * doc/Makefile.in doc/sane-umax_pp.man .cvsignore: Added manpage for - umax_pp (patch from Stéphane Voltz ). - - * tools/README tools/Makefile.in tools/umax_pp.c tools/.cvsignore: - Added umax_pp test program (patch from Stéphane Voltz - ). - - * configure configure.in include/sane/config.h.in: Test for - linux/ppdev.h (for umax_pp backend). - - * backend/umax_pp.c backend/umax_pp.h backend/umax_pp_low.c - backend/umax_pp_low.h backend/umax_pp_mid.c backend/umax_pp_mid.h - backend/umax_pp.conf backend/umax_pp.desc backend/Makefile.in - dll.conf: Added umax_pp backend (patch from Stéphane Voltz - ). - -2001-05-02 Henning Meier-Geinitz - - * configure configure.in: Don't use -ansi for Solaris. On some - Solaris installations compilation breaks with -ansi. - - * doc/Makefile.in tools/sane-desc.el doc/.cvsignore: Install - sane.ps and sane.dvi if latex/makeindex/dvips is available. - Generate sane-backends.html in doc/. New target: - install-mostang. Installs the sane standard - (.ps, .ps.gz and html), the html manpages, and sane-backends.html - on www.mostang.com. - -2001-05-01 Henning Meier-Geinitz - - * configure configure.in include/sane/config.h.in README.solaris - sanei/sanei_scsi.c: Added support for Solaris sgen SCSI driver - (patch from Juergen Keil ). - * acinclude.m4 aclocal.m4 configure: Added Irix to the list - of operating systems that can use -Wl,-rpath. - * doc/Makefile.in: Install all the READMEs and other available - documentation in $docdir. Print which manpage is generated. - Don't remove files/dirs that doesn't exist. Remove the html - manpages in distclean. Fixed spelling mistake in .PHONY. - * TODO: Added entries about possible segfaults and memory leaks. - Added entry about AIX problems. Removed entry about installing - documentation. - * PROJECTS: Added Canon FB330P, FP630P. - -2001-04-30 Jochen Eisinger - - * doc/sane-mustek_pp.man: Added information about CIS patches - by Eddy De Greef - -2001-04-29 Chris Pinkham - - * backend/artec.c: Fixed bug causing possible dereference of a NULL - pointer. - * backend/artec.desc: Modified Parport entry to say AS6E scanner - supported by SANE AS6E backend. - -2001-04-29 Petter Reinholdtsen - - * sanei/sanei_config.c sanei/sanei_codec_bin.c: Avoid reading - uninitialized memory. - * sanei/sanei_config.c: Fix memleak when using env - SANE_CONFIG_DIR. - * backend/net.c sanei/sanei_wire.c include/sane/sanei_wire.h: Make - sure net backend release all memory when finished. - * README: Added info about the CVS repository. - -2001-04-29 Henning Meier-Geinitz - - * sanei/sanei_wire.c: Don't free memory that's not alocced. - * sanei/sanei_config.c: Avoid reading uninitialized memory when - checking SANE_CONFIG_DIR. - * backend/mustek.c: Fixed several memory leaks. - * frontend/scanimage.c: Fixed memory leak. - * sanei/sanei_config2.c: Fixed memory leak: vendor wasn't freed. - * PROJECTS: Added entry for the Fujitsu M3091DCd. Updated my email - address. - * TODO: Added entry for the Fujitsu M3091DCd and a combined Fujitsu - backend. Clarified that "printf" also shouldn't be used. - * backend/dll.desc: Added my email as contact address. - * backend/m3091.desc: New file for the Fujitsu M3091DCd. - * doc/sane-mustek.man: Updated URL. - -2001-04-28 Henning Meier-Geinitz - - * backend/mustek.CHANGES backend/umax.CHANGES backend/umax.FAQ - backend/umax.TODO: Moved to doc/mustek respectively doc/umax. - * doc/canon.CHANGES doc/canon.install2700F.txt doc/canon: - Moved canon-specific documentation to doc/canon. - * doc/mustek: New subdirectory for mustek-specific documentation. - * doc/sane-umax*.html doc/sane-umax*.jpg doc/sane-umax-doc.tex - doc/sane-umax-doc.dvi doc/umax: Moved all the umax-specific - documentation to new subdirectory umax. - -2001-04-28 Peter Kirchgessner - - * backend/hp.desc, doc/sane-hp.man: Add support for new models - through PTAL-library - -2001-04-27 Henning Meier-Geinitz - - * backend/agfafogus.c: Moved PATH_MAX after sanei_backend.h include - to avoid warning. Changed printf to DBG. - * backend/mustek.c backend/mustek.CHANGES backend/mustek.desc: Added - support for translating options. Used only PACKAGE_VERSION for - output. Updated email address. New version: 1.0-107. - * include/sane/sanei_backend.h include/sane/saneopts.h: Added macro - SANE_I18N. It's used to mark strings that can be translated and - used by a frontend. Usually these are option titles and descriptions - as well as the contents of string lists. Used this macro to mark - the translatable strings in saneopts.h. More translation support - will follow. - -2001-04-22 Henning Meier-Geinitz - - * PROBLEMS: Point to pnm/saned security risks. - * TODO: Removed the entries about epson usb mis-detection and check - for installed sane versions. - * configure configure.in backend/Makefile.in: Added detection of older - versions of SANE. The pnm backend is now disabled by default. - * backend/dll.c backend/dll.desc: Fixed file descriptor leak (found by - Douglas Gilbert). New version: 1.0.2. - * backend/net.desc: Added Jochen Eisinger's email address as contact - for the net backend. - * doc/sane-pnm.man: Point to pnm/saned security risks. - -2001-04-21 Karl Heinz Kremer - - * backend/epson.conf: Commented out the usb config entry, this can - block other USB scanners from being recognized. - -2001-04-19 Henning Meier-Geinitz - - * AUTHORS: Added Michael Herder and me for pnm. Updated my email - address. - * TODO: Removed pnm entry about adding more options. Added entry about - epson backend freezing when trying to detect non-epson USB scanner. - Added entry about adding contact adresses to .desc files. Added - comment about me working on a sane man page. Removed entry about OS/2 - problems in sanei_scsi.c. - * configure configure.in: Removed a newline in --help message. - * backend/pnm.c: Added several options: gamma tables - (-> arrays), resolution option (word list), read only test option - (SANE_CAP_SOFT_DETECT), several options for returning status codes - in sane_read (all of this is from Michael Herder ). - Added build version info, print version information in sane_init. - Use ../include/sane/ for includes. Version is 1.0.1. - * backend/pnm.desc: Updated contact info and version. - -2001-04-19 Gerhard Jaeger - * backend/plustek.c: removed again that old fgets() call - sorry - -2001-04-19 Petter Reinholdtsen - - * tools/sane-config.in: Fix typo in previous commit. - -2001-04-17 Karl Heinz Kremer - - * doc/sane-epson.man: Fixed types, some reformatting and got rid - of a duplicate paragraph. - -2001-04-17 Henning Meier-Geinitz - - * backend/dc210.desc backend/dc240.desc backend/microtek2.desc: - Update contact information for backends. dc240 status is :NEW. - * TODO: added entries about as6e status shouldn't be :new, and - installing all documentation files. - -2001-04-16 Petter Reinholdtsen - - * Makefile.in: New target 'sort-cvsignore' to keep all .cvsignore - files sorted. - - * acinclude.m4 configure.in tools/sane-config.in: Try to guess how - to set runtime link path, and make it easier to extend. - - * acinclude.m4 configure.in: Clean up warning flag handling. - -2001-04-16 Henning Meier-Geinitz - - * README: Updated xsane link. - * configure configure.in backend/dll.c backend/dll.desc - backend/net.c backend/net.desc include/sane/config.h.in - Yet another change in the version system for dll and net. - For sane_init return the version of the package but use - own internal version number in the source (printed with - debugging enabled) and in *.desc. The internal versions - of both net and dll are set to 1.0.1. Please increase the - build number with every change on the source files. - * doc/realeases.txt -> doc/releases.txt. Fixed spelling error. - Added entries about sane-backends.html, sane.ps, man pages, - platforms page. - -2001-04-14 Gerhard Jaeger - * backend/plustek.c backend/plustek.desc backend/plustek.h - backend/plustek-share.h - minor fixes and additional scanner models - * doc/sane-plustek.man added info about slowIO switch - -2001-04-13 Oliver Rauch - * changed my email address in AUTHORS - -2001-04-13 Henning Meier-Geinitz - - * PROJECTS TODO: Added entry about E3 USB chipset. - * backend/dll.c backend/dll.desc: New version is 1.0.5. Version and - PACKAGE_VERSION is printed with debug level set to 1 or higher. - The version numbers of all backends that are loaded are printed - at debug level 3 or higher. Print error if backend with wrong - major version number is loaded. Some standardization changes - concerning the DBG messages. - * backend/net.c backend/net.desc: New version is 1.0.5. Version and - PACKAGE_VERSION is printed with debug level set to 1 or higher. - Some standardization changes concerning the DBG messages. - * backend/pnm.c: Return SANE_INFO_RELOAD_PARAMS even if the pnm - file doesn't exist or can't be loaded (from mh ). - * doc/backend-writing.txt: Added AUTHORS to the list of things that - should be updated when including a new backend. Added points about - avoiding printf and exit in backends. - * doc/releases.txt: New file. This text summarizes some points to - pay attention to when a new release of sane-backends is made. - Additions and corrections are appreciated. - * doc/scanimage.man: Add some more information about the -V option. - * frontend/scanimage.c: The option -V now also prints the version of - the backend (ususally dll). - -2001-04-11 Abel Deuring - * sanei/sanei_scsi.c: fixed a bug in error handling for the - Linux SG driver verison 3.x - * sanei/sanei_scsi.c, configure.in, configure: Usage of direct IO - disabled by default. - * README.linux: Added a note, how to enable direct IO - -2001-04-08 Henning Meier-Geinitz - - * backend/mustek.c backend/mustek.desc backend/mustek.CHANGES - Added detection of the TA for the Paragon 1200 SP Pro. Added - warning about not supported Trust scanners. Changed description - of contrast and brightness settings. Backend status is "stable" - now. New version: 1.0-106. - * acinclude.m4 aclocal.m4: Fixed comment concerning dc240. - * configure configure.in include/sane/config.h.in: Added test for - socklen_t in sys/socket.h. This fixes the compilation problem on - Irix. - * doc/sane-avision.man doc/sane-ricoh.man doc/sane-s9036.man - doc/sane-tamarack.man: find-scanner is now called - sane-find-scanner and installed on the system so it's not - necessary to point to the tools directory. - * frontend/scanimage.c: Fixed too long line in output. - * sane-config.in: Name is sane-config again (was sane-backends-config - due to the renaming of the package). - * TODO: Removed entry about net.c not compiling on Irix and - references to find-scanner in the man pages. Updated numbers of - the compilation warnings. Still too many, however. - -2001-04-07 Henning Meier-Geinitz - - * backend/sc240.c backend/dc240.h backend/dc240.conf - backend/dc240.desc backend/dll.conf doc/sane-dc240.man: - Added dc240 backend for the Kodak DC240 Digital camera (from - Peter Fales ). - * doc/Makefile.in: Added sane-dc240 in section 5. - * backend/Makefile.in: Added dc240. - * configure configure.in: If the jpeg libs are not available, - dc240 is also disabled. - * AUTHORS: Added entry for dc240 and updated email address of - Peter Fales. - * NEWS: First version of the news entry for 1.0.5. - * PROJECTS: Removed dc240. Added Microrec ScanMaker 3600. - * README: Added dc240. - * TODO: Removed dc240. Added entry about keep-alive mechanism in saned. - * sane-backends.lsm: Added dc240. - * testsuite/.cvsignore: New file. Added entry for Makefile. - -2001-03-31 Karl Heinz Kremer - - * backend/epson.*: Next attempt to get the reported number of - lines correct for the "color shuffling" part. - Added more comments. - -2001-03-31 Henning Meier-Geinitz - - * backend/mustek.c backend/mustek.desc backend/mustek.h - backend/mustek.CHANGES: Fixed grascale gamma for the 600 II N. - Fixed ADF problems when selecting windows smaller than the - whole scan area. Fixed linedistcnace corrections issues concerning - ADF and concerning 1200SP V 1.00. New version: 1.0-105. - -2001-03-31 Henning Meier-Geinitz - - * PROJECTS: Updated entry about Canon 1220U and Umax 1220P / HP3200C. - Added entry about Kodak DC-240. - * TODO: Added Umax 1200P/2000P & HP 320C + Kodak DC-240 as backends - to be included. Added net.c compilation problem. - -2001-03-10 Jochen Eisinger - - * frontend/saned.c: fixed bug that allowed access to a scanner - without being prompted for a password - -2001-03-04 Oliver Rauch - - * umack backend updated to version 1.0-build-25 - -2001-02-26 Abel Deuring - - * sanei/sanei_scsi.c: removed a possible null pointer - dereference in the Solaris/Schilling driver part. (Bug was - found and fixed by William L. Sebok) - - * backend/tamarack.c: inconsistent call to sanei_scsi_cmd fixed - -2001-02-22 Petter Reinholdtsen - - * TODO: Add comment on how link problems should really be fixed. - * TODO: List memleak problem for sane_get_devices(). - - * configure.in include/sane/config.h.in: Really move definition of - SCSIBUFFERSIZE from CFLAGS to config.h. - - * configure.in testsuite/*: Started on runtime test suite. - Currently only tests if PNM test scanning works. - - * sanei/sanei_constrain_value.c sanei/sanei_load_values.c - sanei/sanei_save_values.c: Include "sane/sanei.h" to make sure the - prototype match the function. - - * backend/pnm.c: Write more sensible error message when failing to - open PNM file. - - * include/sane/sanei_backend.h: Include before testing - for O_NONBLOCK and before testing for PATH_MAX to - increase the chances of getting the real value. - -2001-02-12 Petter Reinholdtsen - - * backend/dll.c backend/v4l.c: Get rid of small memory leak when - using 'scanimage -L'. - -2001-02-10 Tom Martone - - * backend/bh.c backend/bh.h doc/sane-bh.man - added support for Copiscan 8000 series by Mark Temple - added options deskew and rotation - inquiry compares product to COPISCAN rather than COPISCAN II - -2001-02-04 Peter Kirchgessner - - * hp-backend V0.94, backend/hp.c hp-handle.c hp-scl.h: - Switch off lamp after scan - -2001-01-31 Abel Deuring - - * sanei/linux_sg3_err.h: New version provided by Douglas Gilbert. - Does not longer #include and - #include - * sanei/sanei_scsi.c (Linux part): fixed some format errors in - debug output; added debug: system("cat /proc/scsi/sg/debug 1>&2"), - if debug level >= 255. (Suggestion by Douglas Gilbert) - -2001-01-23 Oliver Rauch - - * TODO: sane-config changes - -2001-01-21 Tom Martone - - * backend/dll.conf: Added bh - -2001-01-21 Henning Meier-Geinitz - - * AUTHORS: Added Tom Martone. - * PROJECTS: Removed bh (now included in sane). - * README: Added entry for sane-bh(5). - * TODO: Removed bh. Updated BearPaw entry. Added entry about v4l - problem. - * backend/v4l.c: Changed comment as v4l is part of the sane package. - -2001-01-20 Tom Martone - - * doc/.cvsignore: Added sane-bh.5. - -2001-01-20 Tom Martone - - * backend/bh.c backend/bh.conf backend/bh.h doc/sane-bh.man - Added new backend Bell and Howell Copiscan scanners - * backend/bh.desc - Updated version from (0.1) to 1.0-4 - Referenced manpage - * backend/Makefile.in - Added bh to PRELOADABLE_BACKENDS - Added libsane-bh.la dependencies - * doc/Makefile.in - Added sane-bh.5 to SECT5 - -2001-01-17 Henning Meier-Geinitz - - * backend/mustek.c backend/mustek.desc backend/mustek.h - backend/mustek.CHANGES doc/sane-mustek.man: - Added 36 bit mode for Pro models. Removed support for "special" - modes, used options instead. Code cleanup. Updated manpage - concerning sane-find-scanner. New version: 1.0-104. - * configure: regenerated from configure.in. - -2001-01-14 Petter Reinholdtsen - - * sanei/sanei_scsi.c: Make sure to initialize uninitialized - variable 'defined' to zero. - - * include/sane/sanei_wire.h: Add missing prototype for - sanei_w_ptr() and sanei_w_bool(). - - * configure.in include/sane/config.h.in: Move definition of - HAVE_DEV_URANDOM and SCSIBUFFERSIZE from CFLAGS to config.h. - -2001-01-07 Abel Deuring - - * sanei/sanei_scsi-c: (Linux part) timeout for SCSI commands - sent with the SG driver version increased; debug output of - device status, host status, driver status and sense buffer - added. - -2001-01-09 Henning Meier-Geinitz - - * PROJECTS TODO: Added/updated entries about backends for Mustek - BearPaw and 1200 UB scanners. - -2001-01-07 Abel Deuring - - * sanei/sanei_scsi-c: (Linux part) improved detection of - sanei_scsi_max_request_size. Setting SANE_SG_BUFFERSIZE for - low drivers which don't support scatter-gather should - no longer be necessary. - * sanei/sanei_scsi-c: (Linux part) Added support for the new - devfs in sanei_scsi_find_devices- - * backend/sharp.c: Test for existence of shm.h added. - * TODO: Removed entry about missing detection of shm.h in sharp - backend. - -2001-01-03 Henning Meier-Geinitz - - * PROJECTS: Added Umax 1220P / HP3200C. - -2000-12-31 Henning Meier-Geinitz - - * tools/find-scanner.c: Removed. Now called sane-find-scanner. - * tools/sane-find-scanner: New file (was find-scanner). - * tools/.cvsignore tools/Makefile.in tools/README: Updated because - of name change. sane-find-scanner is installed now. - * README README.linux: Updated because of sane-find-scanner. - * frontend/scanimage.man: Updated because of sane-find-scanner. - * doc/sane-find-scanner.man: New file. - * doc/.cvsignore doc/Makefile.in: Added sane-find-scanner(1). - * TODO: Updated concerning sane-find-scanner. Added entry about - qcam /tmp file handling. Some spelling corrections. - -2000-12-31 Henning Meier-Geinitz - - * backend/mustek.CHANGES backend/mustek.c backend/mustek.desc - backend/mustek.h doc/sane-mustek.man: Added calibration for Pro - scanners and the SE 12000 SP Plus. Added option to use the full - legal size of the Paragon 1200 LS scanner. Added fast preview for - Pro scanners. Bug fixes. New version: 1.0-103. - -2000-12-25 Karl Heinz Kremer - - * TODO: Removed entry about net/saned crashes. - * backend/net.c: Fixed segfault when using SANE_TYPE_STRING options - (e.g. scanimage on localhost). Added checks to prevent other - segfaults. Fixed some warnings. - * backend/snapscan.desc: Changed to use new homepage. - -2000-12-23 Henning Meier-Geinitz - - * NEWS: Added date of release. - * TODO: Removed entries about PATH_MAX, sanei_scsi_find_devices, and - shm.h. Added entry about the necessity to check HAVE_SYS_SHM_H. - * configure configure.in include/sane/config.h.in: Default to - --enable-warnings again. Don't set "-ansi" for OS/2. Test for - sys/shm.h. - * backend/GUIDE: Moved to doc/backend-writing.txt. - * doc/backend-writing.txt: New file (moved from backend/GUIDE). - Added comments about sanei-backend.h and PATH_MAX. - * include/sane/sanei_backend.h: Added define for PATH_MAX (if - necessary). - * sanei/sanei_scsi.c: Implemented sanei_scsi_find_devices for FreeBSD - (from ports@FreeBSD.org). - * tools/Makefile.in: Use INSTALL_SCRIPT instead of INSTALL_PROGRAM for - sane-config (from ports@FreeBSD.org). - -- cgit v1.2.3