From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- PROBLEMS | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 PROBLEMS (limited to 'PROBLEMS') diff --git a/PROBLEMS b/PROBLEMS new file mode 100644 index 0000000..4eef21a --- /dev/null +++ b/PROBLEMS @@ -0,0 +1,22 @@ +Last update: 2006-01-05 + +- Avoiding damage on flatbed scanners + + Most flatbed scanners have no protection against exceeding the physical scan + area height. That is, if a scan is attempted with a height that exceeds the + height of the scan surface, the scanner begins making loud noises and the + scan mechanism may be damaged. Thus, if you hear such a noise, IMMEDIATELY + turn off the scanner. + + Normally, the backend will ensure that the maximum scan height is not + exceeded. However, if your scanner model has not been tested yet this + safety-guard may not work. Please report errors like this to the author of + the backend or the sane-devel mailing list. + +- Security problems with saned (SANE network scanning daemon) + + saned is not intended to be exposed to the internet or other non-trusted + networks. Make sure that access is limited by tcpwrappers and/or a firewall + setup. Don't depend only on saned's own authentification. Don't run saned + as root if it's not necessary. And do not install saned as setuid root. + Read man saned(8) for details. -- cgit v1.2.3