From 1687222e1b9e74c89cafbb5910e72d8ec7bfd40f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 31 Jul 2019 16:59:49 +0200 Subject: New upstream version 1.0.28 --- backend/bh.c | 333 +++++++++++++++++++++++++++++------------------------------ 1 file changed, 166 insertions(+), 167 deletions(-) (limited to 'backend/bh.c') diff --git a/backend/bh.c b/backend/bh.c index 9424bd6..60741cc 100644 --- a/backend/bh.c +++ b/backend/bh.c @@ -76,7 +76,7 @@ static SANE_Int fake_inquiry = 0; static int allblank(const char *s) { - while (s && *s) + while (s && *s) if (!isspace(*s++)) return 0; @@ -111,10 +111,10 @@ trim_spaces(char *s, size_t n) } static SANE_String_Const -print_devtype (SANE_Byte devtype) +print_devtype (SANE_Byte devtype) { static SANE_String devtypes[] = - { + { "disk", "tape", "printer", @@ -127,21 +127,21 @@ print_devtype (SANE_Byte devtype) "communicator" }; - return (devtype > 0 && devtype < NELEMS(devtypes)) ? - devtypes[devtype] : + return (devtype > 0 && devtype < NELEMS(devtypes)) ? + devtypes[devtype] : "unknown-device"; } static SANE_String_Const -print_barcodetype (SANE_Int i) +print_barcodetype (SANE_Int i) { - return (i > 0 && i < NELEMS(barcode_search_bar_list)) ? - barcode_search_bar_list[i] : + return (i > 0 && i < NELEMS(barcode_search_bar_list)) ? + barcode_search_bar_list[i] : (SANE_String_Const) "unknown"; } static SANE_String_Const -print_orientation (SANE_Int i) +print_orientation (SANE_Int i) { switch(i) { @@ -163,7 +163,7 @@ print_orientation (SANE_Int i) } static SANE_String_Const -print_read_type (SANE_Int i) +print_read_type (SANE_Int i) { static char buf[32]; SANE_Int n; @@ -249,72 +249,72 @@ print_read_type (SANE_Int i) return buf; } -static SANE_Int +static SANE_Int get_rotation_id(char *s) { SANE_Int i; - for (i = 0; rotation_list[i]; i++) - if (strcmp(s, rotation_list[i]) == 0) + for (i = 0; rotation_list[i]; i++) + if (strcmp(s, rotation_list[i]) == 0) break; /* unknown strings are treated as '0' */ return rotation_list[i] ? i : 0; } -static SANE_Int +static SANE_Int get_compression_id(char *s) { SANE_Int i; - for (i = 0; compression_list[i]; i++) - if (strcmp(s, compression_list[i]) == 0) + for (i = 0; compression_list[i]; i++) + if (strcmp(s, compression_list[i]) == 0) break; /* unknown strings are treated as 'none' */ return compression_list[i] ? i : 0; } -static SANE_Int +static SANE_Int get_barcode_id(char *s) { SANE_Int i; - for (i = 0; barcode_search_bar_list[i]; i++) - if (strcmp(s, barcode_search_bar_list[i]) == 0) + for (i = 0; barcode_search_bar_list[i]; i++) + if (strcmp(s, barcode_search_bar_list[i]) == 0) break; /* unknown strings are treated as 'none' */ return barcode_search_bar_list[i] ? i : 0; } -static SANE_Int +static SANE_Int get_scan_mode_id(char *s) { SANE_Int i; - for (i = 0; scan_mode_list[i]; i++) - if (strcmp(s, scan_mode_list[i]) == 0) + for (i = 0; scan_mode_list[i]; i++) + if (strcmp(s, scan_mode_list[i]) == 0) break; /* unknown strings are treated as 'lineart' */ return scan_mode_list[i] ? i : 0; } -static SANE_Int +static SANE_Int get_paper_id(char *s) { SANE_Int i; - for (i = 0; paper_list[i]; i++) - if (strcmp(s, paper_list[i]) == 0) + for (i = 0; paper_list[i]; i++) + if (strcmp(s, paper_list[i]) == 0) break; /* unknown strings are treated as 'custom' */ return paper_list[i] ? i : 0; } -static SANE_Int +static SANE_Int get_barcode_search_mode(char *s) { SANE_Int i; @@ -335,7 +335,7 @@ get_barcode_search_mode(char *s) { i = 9; } - else + else { /* unknown strings are treated as 'horiz-vert' */ DBG(1, "get_barcode_search_mode: unrecognized string `%s'\n", s); @@ -345,7 +345,7 @@ get_barcode_search_mode(char *s) return i; } -static void +static void appendStdList(BH_Info *sc, SANE_Int res) { /* append entry to resolution list - a SANE_WORD_LIST */ @@ -353,7 +353,7 @@ appendStdList(BH_Info *sc, SANE_Int res) sc->resStdList[0]++; } -static void +static void ScannerDump(BH_Scanner *s) { int i; @@ -370,9 +370,9 @@ ScannerDump(BH_Scanner *s) sdev->type); DBG (1, "Type: '%s' Vendor: '%s' Product: '%s' Revision: '%s'\n", - print_devtype(info->devtype), - info->vendor, - info->product, + print_devtype(info->devtype), + info->vendor, + info->product, info->revision); DBG (1, "Automatic Document Feeder:%s\n", @@ -399,8 +399,8 @@ ScannerDump(BH_Scanner *s) info->canBarCode ? " " : "", info->canIcon ? " " : "", info->canSection ? "
" : ""); - - DBG (1, "Max bytes per scan-line: %d (%d pixels)\n", + + DBG (1, "Max bytes per scan-line: %d (%d pixels)\n", info->lineMaxBytes, info->lineMaxBytes * 8); @@ -408,11 +408,11 @@ ScannerDump(BH_Scanner *s) info->resBasicX, info->resBasicY); - DBG (1, "Maximum resolution (X/Y): %d/%d\n", + DBG (1, "Maximum resolution (X/Y): %d/%d\n", info->resMaxX, info->resMaxY); - DBG (1, "Minimum resolution (X/Y): %d/%d\n", + DBG (1, "Minimum resolution (X/Y): %d/%d\n", info->resMinX, info->resMinY); @@ -421,8 +421,8 @@ ScannerDump(BH_Scanner *s) DBG (1, " %d\n", info->resStdList[i+1]); DBG (1, "Window Width/Height (in basic res) %d/%d (%.2f/%.2f inches)\n", - info->winWidth, - info->winHeight, + info->winWidth, + info->winHeight, (info->resBasicX != 0) ? ((float) info->winWidth) / info->resBasicX : 0.0, (info->resBasicY) ? ((float) info->winHeight) / info->resBasicY : 0.0); @@ -430,15 +430,15 @@ ScannerDump(BH_Scanner *s) info->canDuplex ? "Duplex Scanner" : "Simplex Scanner", info->canACE ? " (ACE capable)" : "", info->canCheckADF ? " (ADF Paper Sensor capable)" : ""); - + sprintf(inquiry_data, "Vendor: %s Product: %s Rev: %s %s%s%s\n", - info->vendor, - info->product, + info->vendor, + info->product, info->revision, info->canDuplex ? "Duplex Scanner" : "Simplex Scanner", info->canACE ? " (ACE capable)" : "", info->canCheckADF ? " (ADF Paper Sensor capable)" : ""); - + DBG (5, "autoborder_default=%d\n", info->autoborder_default); DBG (5, "batch_default=%d\n", info->batch_default); DBG (5, "deskew_default=%d\n", info->deskew_default); @@ -534,7 +534,7 @@ read_barcode_data (BH_Scanner *s, FILE *fp) l += (BH_DECODE_FUDGE * 4); /* write the decoded barcode data into the file */ - fprintf(fp, "\n
%s
\n", + fprintf(fp, "\n
%s
\n", print_read_type((int) s->readlist[s->readptr])); fprintf(fp, " %s\n %d\n", print_barcodetype((int) _2btol(buf.barcodetype)), @@ -558,7 +558,7 @@ read_barcode_data (BH_Scanner *s, FILE *fp) buf.barcodedata); } while (num_found <= BH_DECODE_TRIES); - DBG (3, "read_barcode_data: found %d barcodes, returning %s\n", + DBG (3, "read_barcode_data: found %d barcodes, returning %s\n", num_found, sane_strstatus(status)); return status; @@ -581,7 +581,7 @@ read_icon_data (BH_Scanner *s) memset (&buf, 0, sizeof(buf)); status = sanei_scsi_cmd (s->fd, &cmd, sizeof (cmd), &buf, &buf_size); - + /* set the fields in the scanner handle for later reference */ s->iconwidth = _4btol(buf.iconwidth); s->iconlength = _4btol(buf.iconlength); @@ -593,7 +593,7 @@ read_icon_data (BH_Scanner *s) _4btol(buf.iconwidth), _4btol(buf.iconlength), _4btol(buf.iconwidthbytes)); - DBG(3, "read_icon_data: bitordering:%02x, icondatalen:%lu\n", + DBG(3, "read_icon_data: bitordering:%02x, icondatalen:%lu\n", buf.bitordering, _4btol(buf.icondatalen)); @@ -611,7 +611,7 @@ read_barfile (BH_Scanner *s, void *buf, size_t *buf_size) if (s->barf != NULL) { - /* this function needs to set InvalidBytes so it looks + /* this function needs to set InvalidBytes so it looks * like a B&H scsi EOF */ if ((nread = fread(buf, 1, *buf_size, s->barf)) < *buf_size) @@ -802,7 +802,7 @@ mode_select_barcode_param1 (BH_Scanner *s) _lto2b((SANE_Int)_OPT_VAL_WORD_THOUSANDTHS(s, OPT_BARCODE_HMIN), select_cmd.mp.minbarheight); select_cmd.mp.searchcount = _OPT_VAL_WORD(s, OPT_BARCODE_SEARCH_COUNT); - select_cmd.mp.searchmode = + select_cmd.mp.searchmode = get_barcode_search_mode(_OPT_VAL_STRING(s, OPT_BARCODE_SEARCH_MODE)); _lto2b(_OPT_VAL_WORD(s, OPT_BARCODE_SEARCH_TIMEOUT), select_cmd.mp.searchtimeout); @@ -832,10 +832,10 @@ mode_select_barcode_param2 (BH_Scanner *s) select_cmd.cmd[4] = sizeof(select_cmd.mp); len = sizeof(select_cmd.mp); - status = sanei_scsi_cmd (s->fd, &select_cmd.cmd, sizeof (select_cmd.cmd), + status = sanei_scsi_cmd (s->fd, &select_cmd.cmd, sizeof (select_cmd.cmd), &select_cmd.mp, &len); - if (status == SANE_STATUS_GOOD) + if (status == SANE_STATUS_GOOD) { DBG(8, "mode_select_barcode_param2: sensed values: relmax:%d barmin:%d barmax:%d\n", (int) _2btol(select_cmd.mp.relmax), @@ -906,10 +906,10 @@ mode_select_barcode_param3 (BH_Scanner *s) select_cmd.cmd[4] = sizeof(select_cmd.mp); len = sizeof(select_cmd.mp); - status = sanei_scsi_cmd (s->fd, &select_cmd.cmd, sizeof (select_cmd.cmd), + status = sanei_scsi_cmd (s->fd, &select_cmd.cmd, sizeof (select_cmd.cmd), &select_cmd.mp, &len); - if (status == SANE_STATUS_GOOD) + if (status == SANE_STATUS_GOOD) { DBG(8, "mode_select_barcode_param3: sensed values: contrast:%d patchmode:%d\n", (int) _2btol(select_cmd.mp.barcodecontrast), @@ -992,10 +992,10 @@ set_window (BH_Scanner *s, SANE_Byte batchmode) memset (&set_window_cmd, 0, sizeof (set_window_cmd)); set_window_cmd.cmd[0] = BH_SCSI_SET_WINDOW; - DBG(3, "set_window: sizeof(hdr) %d, sizeof(window): %d\n", + DBG(3, "set_window: sizeof(hdr) %d, sizeof(window): %d\n", (int)sizeof(set_window_cmd.hdr), (int)sizeof(set_window_cmd.window)); - _lto3b(sizeof(set_window_cmd.hdr) + sizeof(set_window_cmd.window), + _lto3b(sizeof(set_window_cmd.hdr) + sizeof(set_window_cmd.window), &set_window_cmd.cmd[6]); _lto2b(256, &set_window_cmd.hdr[6]); @@ -1008,9 +1008,9 @@ set_window (BH_Scanner *s, SANE_Byte batchmode) _lto4b((int) _OPT_VAL_WORD_THOUSANDTHS(s, OPT_TL_X), set_window_cmd.window.ulx); _lto4b((int) _OPT_VAL_WORD_THOUSANDTHS(s, OPT_TL_Y), set_window_cmd.window.uly); - width = (SANE_Int) (_OPT_VAL_WORD_THOUSANDTHS(s, OPT_BR_X) - + width = (SANE_Int) (_OPT_VAL_WORD_THOUSANDTHS(s, OPT_BR_X) - _OPT_VAL_WORD_THOUSANDTHS(s, OPT_TL_X)); - length = (SANE_Int) (_OPT_VAL_WORD_THOUSANDTHS(s, OPT_BR_Y) - + length = (SANE_Int) (_OPT_VAL_WORD_THOUSANDTHS(s, OPT_BR_Y) - _OPT_VAL_WORD_THOUSANDTHS(s, OPT_TL_Y)); _lto4b(width, set_window_cmd.window.windowwidth); @@ -1023,16 +1023,16 @@ set_window (BH_Scanner *s, SANE_Byte batchmode) /*!!! contrast (not used) */ /*!!! set_window_cmd.window.contrast = _OPT_VAL_WORD(s, OPT_CONTRAST); */ /* imagecomposition 0x00 lineart, 0x01 dithered/halftone, 0x02 grayscale*/ - set_window_cmd.window.imagecomposition = + set_window_cmd.window.imagecomposition = get_scan_mode_id(_OPT_VAL_STRING(s, OPT_SCAN_MODE)); - + set_window_cmd.window.bitsperpixel = 0x01; /*!!! halftone code (not used) */ /*!!! halftone id (not used) */ set_window_cmd.window.paddingtype = 0x03; /* truncate byte */ if (_OPT_VAL_WORD(s, OPT_NEGATIVE) == SANE_TRUE) { - /* reverse image format (valid when bitsperpixel=1) + /* reverse image format (valid when bitsperpixel=1) * 0x00 normal, 0x01 reversed. This is bit 7 of paddingtype. */ set_window_cmd.window.paddingtype |= 0x80; @@ -1134,7 +1134,7 @@ get_window (BH_Scanner *s, SANE_Int *w, SANE_Int *h, SANE_Bool backpage) autoborder = _OPT_VAL_WORD(s, OPT_AUTOBORDER) == 1; - while (1) + while (1) { i++; memset (&cmd, 0, sizeof (cmd)); @@ -1148,7 +1148,7 @@ get_window (BH_Scanner *s, SANE_Int *w, SANE_Int *h, SANE_Bool backpage) get_window_data.window.windowid = (backpage == SANE_TRUE) ? 1 : 0; len = sizeof(get_window_data); - status = sanei_scsi_cmd (s->fd, &cmd, sizeof (cmd), + status = sanei_scsi_cmd (s->fd, &cmd, sizeof (cmd), &get_window_data, &len); if (status == SANE_STATUS_GOOD) { @@ -1198,9 +1198,9 @@ get_parameters (SANE_Handle handle, SANE_Parameters *params) SANE_Frame format; DBG(3, "get_parameters called\n"); - + memset (&s->params, 0, sizeof (s->params)); - + res = _OPT_VAL_WORD(s, OPT_RESOLUTION); /* make best-effort guess at what parameters will look like once @@ -1242,7 +1242,7 @@ get_parameters (SANE_Handle handle, SANE_Parameters *params) /* update parameters based on the current item */ status = SANE_STATUS_GOOD; - if (itemtype == BH_SCSI_READ_TYPE_FRONT) + if (itemtype == BH_SCSI_READ_TYPE_FRONT) { DBG (3, "get_parameters: sending GET WINDOW (front)\n"); status = get_window (s, &w, &l, SANE_FALSE); @@ -1293,7 +1293,7 @@ get_parameters (SANE_Handle handle, SANE_Parameters *params) length = s->sections[sectnum - 1].length * res / 1000.0; } else if ( (itemtype >= BH_SCSI_READ_TYPE_BACK_BARCODE && - itemtype <= (BH_SCSI_READ_TYPE_BACK_BARCODE + NUM_SECTIONS)) || + itemtype <= (BH_SCSI_READ_TYPE_BACK_BARCODE + NUM_SECTIONS)) || (itemtype >= BH_SCSI_READ_TYPE_FRONT_BARCODE && itemtype <= (BH_SCSI_READ_TYPE_FRONT_BARCODE + NUM_SECTIONS)) ) { @@ -1331,7 +1331,7 @@ get_parameters (SANE_Handle handle, SANE_Parameters *params) res, width, length); return SANE_STATUS_INVAL; } - + /* we disable our compression/barcode formats in preview as well * as with the disable_optional_frames configuration option. NOTE: * we may still be delivering 'wierd' data and lying about it being _GRAY! @@ -1357,11 +1357,11 @@ get_parameters (SANE_Handle handle, SANE_Parameters *params) *params = s->params; DBG (1, "get_parameters: format=%d, pixels/line=%d, bytes/line=%d, " - "lines=%d, dpi=%d\n", - (int) s->params.format, - s->params.pixels_per_line, + "lines=%d, dpi=%d\n", + (int) s->params.format, + s->params.pixels_per_line, s->params.bytes_per_line, - s->params.lines, + s->params.lines, res); return SANE_STATUS_GOOD; @@ -1404,7 +1404,7 @@ section_parse(const char *val, BH_Section *sect, SANE_Int res, SANE_Int comp) if (y) f = strtok(NULL, seps); if (!x || !y || !w || !l) break; - mm = strtod(x, &ep); + mm = strtod(x, &ep); if (*ep != '\0' || errno == ERANGE || mm < 0.0) break; sect->left = mm * 1000.0 / MM_PER_INCH; @@ -1482,10 +1482,10 @@ section_parse(const char *val, BH_Section *sect, SANE_Int res, SANE_Int comp) DBG(3, "section_parse: converted '%s' (mm) to " "%ldx%ld+%ld+%ld (thousandths) " - "flags=%02x compression=[%d,%d] frame=%s\n", - val, + "flags=%02x compression=[%d,%d] frame=%s\n", + val, sect->width, sect->length, sect->left, sect->top, - sect->flags, + sect->flags, sect->compressiontype, sect->compressionarg, sane_strframe(sect->format)); @@ -1515,20 +1515,20 @@ setup_sections (BH_Scanner *s, const char *val) strcpy(buf, val); section = strtok(buf, ","); - while (section != NULL && sectnum < NUM_SECTIONS) + while (section != NULL && sectnum < NUM_SECTIONS) { - if (!allblank(section)) + if (!allblank(section)) { SANE_Int res = _OPT_VAL_WORD(s, OPT_RESOLUTION); - SANE_Int format = + SANE_Int format = get_compression_id(_OPT_VAL_STRING(s, OPT_COMPRESSION)); - status = section_parse(section, &s->sections[sectnum], + status = section_parse(section, &s->sections[sectnum], res, format); if (status != SANE_STATUS_GOOD) { - DBG(1, - "setup_sections: error parsing section `%s'\n", + DBG(1, + "setup_sections: error parsing section `%s'\n", section); break; } @@ -1562,12 +1562,12 @@ start_setup (BH_Scanner *s) status = setup_sections(s, _OPT_VAL_STRING(s, OPT_SECTION)); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: setup_sections failed: %s\n", + DBG(1, "start_setup: setup_sections failed: %s\n", sane_strstatus(status)); return status; } - /* see whether we'll be decoding barcodes and + /* see whether we'll be decoding barcodes and * set the barcodes flag appropriately */ if (s->search_bars[0] == 0) @@ -1655,10 +1655,10 @@ start_setup (BH_Scanner *s) SANE_Word flags = s->sections[i].flags; if (flags & BH_SECTION_FRONT_BAR) - s->readlist[s->readcnt++] = + s->readlist[s->readcnt++] = BH_SCSI_READ_TYPE_FRONT_BARCODE + i + 1; if (flags & BH_SECTION_BACK_BAR) - s->readlist[s->readcnt++] = + s->readlist[s->readcnt++] = BH_SCSI_READ_TYPE_BACK_BARCODE + i + 1; } } @@ -1687,10 +1687,10 @@ start_setup (BH_Scanner *s) SANE_Word flags = s->sections[i].flags; if (flags & BH_SECTION_FRONT_PATCH) - s->readlist[s->readcnt++] = + s->readlist[s->readcnt++] = BH_SCSI_READ_TYPE_FRONT_PATCHCODE + i + 1; if (flags & BH_SECTION_BACK_PATCH) - s->readlist[s->readcnt++] = + s->readlist[s->readcnt++] = BH_SCSI_READ_TYPE_BACK_PATCHCODE + i + 1; } } @@ -1707,7 +1707,7 @@ start_setup (BH_Scanner *s) if (_OPT_VAL_WORD(s, OPT_BATCH) == SANE_TRUE) { - /* if batchmode is enabled, then call set_window to + /* if batchmode is enabled, then call set_window to * abort the batch (even though there might not (and probably * isn't) a batch in progress). This avoids a batch start error * in the case where a previous batch was not aborted. @@ -1716,7 +1716,7 @@ start_setup (BH_Scanner *s) set_window(s, BH_BATCH_ABORT); batchmode = BH_BATCH_ENABLE; - } + } else { batchmode = BH_BATCH_DISABLE; @@ -1750,7 +1750,7 @@ start_setup (BH_Scanner *s) status = set_window(s, batchmode); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: SET WINDOW failed: %s\n", + DBG(1, "start_setup: SET WINDOW failed: %s\n", sane_strstatus(status)); return status; } @@ -1759,7 +1759,7 @@ start_setup (BH_Scanner *s) status = mode_select_timeout(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_timeout failed: %s\n", + DBG(1, "start_setup: mode_select_timeout failed: %s\n", sane_strstatus(status)); return status; } @@ -1770,7 +1770,7 @@ start_setup (BH_Scanner *s) status = mode_select_icon(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_icon failed: %s\n", + DBG(1, "start_setup: mode_select_icon failed: %s\n", sane_strstatus(status)); return status; } @@ -1782,7 +1782,7 @@ start_setup (BH_Scanner *s) status = mode_select_barcode_priority(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_barcode_priority failed: %s\n", + DBG(1, "start_setup: mode_select_barcode_priority failed: %s\n", sane_strstatus(status)); return status; } @@ -1791,7 +1791,7 @@ start_setup (BH_Scanner *s) status = mode_select_barcode_param1(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_barcode_param1 failed: %s\n", + DBG(1, "start_setup: mode_select_barcode_param1 failed: %s\n", sane_strstatus(status)); return status; } @@ -1800,7 +1800,7 @@ start_setup (BH_Scanner *s) status = mode_select_barcode_param2(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_barcode_param2 failed: %s\n", + DBG(1, "start_setup: mode_select_barcode_param2 failed: %s\n", sane_strstatus(status)); return status; } @@ -1809,7 +1809,7 @@ start_setup (BH_Scanner *s) status = mode_select_barcode_param3(s); if (status != SANE_STATUS_GOOD) { - DBG(1, "start_setup: mode_select_barcode_param3 failed: %s\n", + DBG(1, "start_setup: mode_select_barcode_param3 failed: %s\n", sane_strstatus(status)); return status; } @@ -1829,13 +1829,13 @@ start_scan (BH_Scanner *s) /* SANE front ends will call this function between 'FRAMES'. * A single scan on the B&H may result in up to 56 different * things to read (20 are SANE image frames, 36 are non-SANE - * data - decoded bar/patch codes). + * data - decoded bar/patch codes). */ if (s->readcnt > 1 && s->scanning == SANE_TRUE) { DBG(3, "start_scan: any more items in the readlist?\n"); - /* we've been reading data from this scan, so we just + /* we've been reading data from this scan, so we just * move on to the next item in the readlist without * starting a new scan. */ @@ -1850,7 +1850,7 @@ start_scan (BH_Scanner *s) itemtype = s->readlist[s->readptr]; DBG(3, "start_scan: advance readlist(%d, %d)\n", - s->readptr, + s->readptr, (int) itemtype); /* 'dance' by the non-SANE data streams @@ -1869,12 +1869,12 @@ start_scan (BH_Scanner *s) { fprintf(fp, "\n"); - for (; - s->readptr < s->readcnt && - status == SANE_STATUS_GOOD; + for (; + s->readptr < s->readcnt && + status == SANE_STATUS_GOOD; s->readptr++) { - if (s->readlist[s->readptr] == + if (s->readlist[s->readptr] == BH_SCSI_READ_TYPE_SENDBARFILE) { break; } @@ -1888,14 +1888,14 @@ start_scan (BH_Scanner *s) fclose(fp); if ((s->barf = fopen(s->barfname, "r")) == NULL) { - DBG(1, "sane_start: error opening barfile `%s'\n", + DBG(1, "sane_start: error opening barfile `%s'\n", s->barfname); status = SANE_STATUS_IO_ERROR; } } else { - DBG(1, "sane_start: error opening barfile `%s'\n", + DBG(1, "sane_start: error opening barfile `%s'\n", s->barfname); status = SANE_STATUS_IO_ERROR; } @@ -1905,7 +1905,7 @@ start_scan (BH_Scanner *s) { /* read the icon header setting the iconwidth and iconlength * to the actual values so get_parameters will have them. - * Subsequent calls to sane_read will get pure image data + * Subsequent calls to sane_read will get pure image data * since the icon header has been consumed. */ @@ -1922,7 +1922,7 @@ start_scan (BH_Scanner *s) return status; } - /* if we reach here, we're finished with the readlist and + /* if we reach here, we're finished with the readlist and * will drop through to start a new scan */ } @@ -1990,7 +1990,7 @@ sense_handler (int scsi_fd, u_char *result, void *arg) EOM = (result[2] & 0x40) != 0; /* End Of Media */ ILI = (result[2] & 0x20) != 0; /* Invalid Length Indicator */ InvalidBytes = ValidData ? _4btol(&result[3]) : 0; - + DBG(3, "sense_handler: result=%x, sense=%x, asc=%x, ascq=%x\n", result[0], sense, asc, ascq); DBG(3, "sense_handler: ErrorCode %02x ValidData: %d " @@ -2010,8 +2010,8 @@ sense_handler (int scsi_fd, u_char *result, void *arg) return SANE_STATUS_IO_ERROR; /* error code is invalid */ } - /* handle each sense key; - * RSC supports 0x00, 0x02, 0x03, 0x04, 0x05, 0x06, 0x0B + /* handle each sense key; + * RSC supports 0x00, 0x02, 0x03, 0x04, 0x05, 0x06, 0x0B */ switch (sense) { @@ -2303,7 +2303,7 @@ sense_handler (int scsi_fd, u_char *result, void *arg) break; } - DBG(3, "sense_handler: '%s' '%s' return:%d\n", + DBG(3, "sense_handler: '%s' '%s' return:%d\n", sense_str, as_str, status); return status; @@ -2712,7 +2712,7 @@ init_options (BH_Scanner * s) s->opt[OPT_BARCODE_SEARCH_BAR].constraint.string_list = barcode_search_bar_list; s->opt[OPT_BARCODE_SEARCH_BAR].size = max_string_size (barcode_search_bar_list); s->val[OPT_BARCODE_SEARCH_BAR].s = strdup (barcode_search_bar_list[0]); - + /* Barcode search count (1-7, default 1). */ s->opt[OPT_BARCODE_SEARCH_COUNT].name = SANE_NAME_BARCODE_SEARCH_COUNT; s->opt[OPT_BARCODE_SEARCH_COUNT].title = SANE_TITLE_BARCODE_SEARCH_COUNT; @@ -2762,7 +2762,7 @@ init_options (BH_Scanner * s) s->opt[OPT_SECTION].constraint_type = SANE_CONSTRAINT_NONE; s->opt[OPT_SECTION].size = 255; s->val[OPT_SECTION].s = strdup (""); - + /* Barcode_Relmax */ s->opt[OPT_BARCODE_RELMAX].name = SANE_NAME_BARCODE_RELMAX; s->opt[OPT_BARCODE_RELMAX].title = SANE_TITLE_BARCODE_RELMAX; @@ -2907,7 +2907,7 @@ attach (const char *devnam, BH_Device ** devp) BH_INQUIRY_STANDARD_PAGE_CODE); if (status != SANE_STATUS_GOOD) { - DBG (1, "attach: inquiry (standard data) failed: %s\n", + DBG (1, "attach: inquiry (standard data) failed: %s\n", sane_strstatus (status)); sanei_scsi_close (fd); return status; @@ -2922,7 +2922,7 @@ attach (const char *devnam, BH_Device ** devp) || strncmp ((char *)ibuf.vendor, "B&H SCSI", 8) != 0 || strncmp ((char *)ibuf.product, "COPISCAN ", 9) != 0) { - DBG (1, + DBG (1, "attach: device is not a recognized Bell and Howell scanner\n"); sanei_scsi_close (fd); return SANE_STATUS_INVAL; @@ -2931,11 +2931,11 @@ attach (const char *devnam, BH_Device ** devp) DBG (3, "attach: sending INQUIRY (vpd data)\n"); memset (&vbuf, 0, sizeof (vbuf)); buf_size = sizeof(vbuf); - status = inquiry (fd, &vbuf, &buf_size, 1, + status = inquiry (fd, &vbuf, &buf_size, 1, BH_INQUIRY_VPD_PAGE_CODE); if (status != SANE_STATUS_GOOD) { - DBG (1, "attach: inquiry (vpd data) failed: %s\n", + DBG (1, "attach: inquiry (vpd data) failed: %s\n", sane_strstatus (status)); sanei_scsi_close (fd); return status; @@ -2944,7 +2944,7 @@ attach (const char *devnam, BH_Device ** devp) DBG (3, "attach: sending INQUIRY (jis data)\n"); memset (&jbuf, 0, sizeof (jbuf)); buf_size = sizeof(jbuf); - status = inquiry (fd, &jbuf, &buf_size, 1, + status = inquiry (fd, &jbuf, &buf_size, 1, BH_INQUIRY_JIS_PAGE_CODE); if (status != SANE_STATUS_GOOD) { @@ -3044,7 +3044,7 @@ attach (const char *devnam, BH_Device ** devp) if (jbuf.standardres[1] & 0x04) appendStdList(&dev->info, 600); if (jbuf.standardres[1] & 0x02) appendStdList(&dev->info, 800); if (jbuf.standardres[1] & 0x01) appendStdList(&dev->info, 1200); - if (dev->info.resStdList[0] == 0) + if (dev->info.resStdList[0] == 0) { /* make a default standard resolutions for 200 and 300dpi */ DBG(1, "attach: no standard resolutions reported\n"); @@ -3053,29 +3053,29 @@ attach (const char *devnam, BH_Device ** devp) dev->info.resStdList[2] = 300; dev->info.resBasicX = dev->info.resBasicY = 300; } - + dev->info.winWidth = _4btol(jbuf.windowwidth); dev->info.winHeight = _4btol(jbuf.windowlength); - if (dev->info.winWidth <= 0) + if (dev->info.winWidth <= 0) { dev->info.winWidth = (SANE_Int) (dev->info.resBasicX * 8.5); DBG(1, "attach: invalid window width reported, using %d\n", dev->info.winWidth); } - if (dev->info.winHeight <= 0) + if (dev->info.winHeight <= 0) { dev->info.winHeight = dev->info.resBasicY * 14; DBG(1, "attach: invalid window height reported, using %d\n", dev->info.winHeight); } - mm = (dev->info.resBasicX > 0) ? + mm = (dev->info.resBasicX > 0) ? ((double) dev->info.winWidth / (double) dev->info.resBasicX * MM_PER_INCH) : 0.0; dev->info.x_range.min = SANE_FIX(0.0); dev->info.x_range.max = SANE_FIX(mm); dev->info.x_range.quant = SANE_FIX(0.0); - mm = (dev->info.resBasicY > 0) ? + mm = (dev->info.resBasicY > 0) ? ((double) dev->info.winHeight / (double) dev->info.resBasicY * MM_PER_INCH) : 0.0; dev->info.y_range.min = SANE_FIX(0.0); @@ -3157,35 +3157,35 @@ sane_init (SANE_Int *version_code, SANE_Auth_Callback authorize) if (version_code) *version_code = SANE_VERSION_CODE (SANE_CURRENT_MAJOR, V_MINOR, BUILD); - + fp = sanei_config_open(BH_CONFIG_FILE); if (fp) { char line[PATH_MAX]; const char *lp; size_t len; - + /* read config file */ while (sanei_config_read (line, sizeof (line), fp)) { if (line[0] == '#') /* ignore line comments */ continue; len = strlen (line); - + if (!len) continue; /* ignore empty lines */ - + lp = sanei_config_skip_whitespace (line); - DBG(16, + DBG(16, "sane_init: processing config file line '%s'\n", line); - if (strncmp(lp, "option", 6) == 0 && + if (strncmp(lp, "option", 6) == 0 && (isspace (lp[6]) || lp[6] == '\0')) { lp += 6; lp = sanei_config_skip_whitespace (lp); - + if (strncmp(lp, "disable-optional-frames", 23) == 0) { DBG(1, "sane_init: configuration option " @@ -3205,15 +3205,15 @@ sane_init (SANE_Int *version_code, SANE_Auth_Callback authorize) lp); } } - else + else { - DBG(16, + DBG(16, "sane_init: found a device: line '%s'\n", lp); strncpy (devnam, lp, sizeof(devnam)); devnam[sizeof(devnam)-1] = '\0'; - - sanei_config_attach_matching_devices(devnam, + + sanei_config_attach_matching_devices(devnam, attach_one); } } @@ -3228,7 +3228,7 @@ sane_init (SANE_Int *version_code, SANE_Auth_Callback authorize) return SANE_STATUS_GOOD; } -SANE_Status +SANE_Status sane_get_devices (const SANE_Device ***device_list, SANE_Bool local) { BH_Device *dev; @@ -3259,7 +3259,7 @@ sane_open (SANE_String_Const devnam, SANE_Handle *handle) BH_Device *dev; BH_Scanner *s; DBG(3, "sane_open called\n"); - + if (devnam[0] != '\0') { for (dev = first_dev; dev; dev = dev->next) @@ -3279,7 +3279,7 @@ sane_open (SANE_String_Const devnam, SANE_Handle *handle) { dev = first_dev; } - + if (!dev) return SANE_STATUS_INVAL; @@ -3432,22 +3432,22 @@ sane_control_option (SANE_Handle handle, SANE_Int option, SANE_Action action, { case SANE_TYPE_BOOL: case SANE_TYPE_INT: - DBG(16, "sane_control_option: set_value %s [#%d] to %d\n", + DBG(16, "sane_control_option: set_value %s [#%d] to %d\n", name, option, *(SANE_Word *) val); break; - + case SANE_TYPE_FIXED: - DBG(16, "sane_control_option: set_value %s [#%d] to %f\n", + DBG(16, "sane_control_option: set_value %s [#%d] to %f\n", name, option, SANE_UNFIX(*(SANE_Word *) val)); break; - + case SANE_TYPE_STRING: - DBG(16, "sane_control_option: set_value %s [#%d] to %s\n", + DBG(16, "sane_control_option: set_value %s [#%d] to %s\n", name, option, (char *) val); break; - + default: - DBG(16, "sane_control_option: set_value %s [#%d]\n", + DBG(16, "sane_control_option: set_value %s [#%d]\n", name, option); } @@ -3504,7 +3504,7 @@ sane_control_option (SANE_Handle handle, SANE_Int option, SANE_Action action, case OPT_NUM_OPTS: s->val[option].w = *(SANE_Word *) val; return SANE_STATUS_GOOD; - + /* string options */ case OPT_BARCODE_SEARCH_BAR: /*!!! we're supporting only a single barcode type via the option */ @@ -3584,7 +3584,7 @@ sane_control_option (SANE_Handle handle, SANE_Int option, SANE_Action action, if (info) *info |= SANE_INFO_RELOAD_OPTIONS; if (get_scan_mode_id((SANE_String) val) != 0) { - /* scan mode is not lineart, disable compression + /* scan mode is not lineart, disable compression * and set compression to 'none' */ s->opt[OPT_COMPRESSION].cap |= SANE_CAP_INACTIVE; @@ -3622,9 +3622,9 @@ sane_control_option (SANE_Handle handle, SANE_Int option, SANE_Action action, x_max = SANE_UNFIX(s->hw->info.x_range.max); y_max = SANE_UNFIX(s->hw->info.y_range.max); /* a dimension of 0.0 (or less) is replaced with the max value */ - x = (paper_sizes[paper_id].width <= 0.0) ? x_max : + x = (paper_sizes[paper_id].width <= 0.0) ? x_max : paper_sizes[paper_id].width; - y = (paper_sizes[paper_id].length <= 0.0) ? y_max : + y = (paper_sizes[paper_id].length <= 0.0) ? y_max : paper_sizes[paper_id].length; if (info) *info |= SANE_INFO_RELOAD_PARAMS | SANE_INFO_RELOAD_OPTIONS; @@ -3644,8 +3644,8 @@ sane_control_option (SANE_Handle handle, SANE_Int option, SANE_Action action, left = 0.0; } - s->val[OPT_TL_X].w = SANE_FIX(left); - s->val[OPT_TL_Y].w = SANE_FIX(0.0); + s->val[OPT_TL_X].w = SANE_FIX(left); + s->val[OPT_TL_Y].w = SANE_FIX(0.0); s->val[OPT_BR_X].w = SANE_FIX(MIN(x + left, x_max)); s->val[OPT_BR_Y].w = SANE_FIX(MIN(y, y_max)); } @@ -3670,7 +3670,7 @@ sane_get_parameters (SANE_Handle handle, SANE_Parameters *params) SANE_Int status = SANE_STATUS_GOOD; DBG(3, "sane_get_parameters called\n"); - + if (params) { SANE_Int res; @@ -3686,11 +3686,11 @@ sane_get_parameters (SANE_Handle handle, SANE_Parameters *params) res = _OPT_VAL_WORD(s, OPT_RESOLUTION); DBG (1, "get_parameters: format=%d, pixels/line=%d, bytes/line=%d, " - "lines=%d, dpi=%d\n", - (int) s->params.format, - s->params.pixels_per_line, + "lines=%d, dpi=%d\n", + (int) s->params.format, + s->params.pixels_per_line, s->params.bytes_per_line, - s->params.lines, + s->params.lines, res); } @@ -3718,7 +3718,7 @@ sane_start (SANE_Handle handle) } /* Do the setup once per 'batch'. The SANE standard requires the - * frontend to call sane_cancel once all desired frames have been + * frontend to call sane_cancel once all desired frames have been * acquired. That is when scanning is set back to SANE_FALSE and * the 'batch' is considered done. */ @@ -3739,7 +3739,7 @@ sane_start (SANE_Handle handle) return status; } - return SANE_STATUS_GOOD; + return SANE_STATUS_GOOD; } SANE_Status @@ -3795,13 +3795,13 @@ sane_set_io_mode (SANE_Handle handle, SANE_Bool non_blocking) DBG(3, "sane_set_io_mode called: non_blocking=%d\n", non_blocking); #ifdef NONBLOCKSUPPORTED - if (s->fd < 0) - { - return SANE_STATUS_INVAL; + if (s->fd < 0) + { + return SANE_STATUS_INVAL; } if (fcntl (s->fd, F_SETFL, non_blocking ? O_NONBLOCK : 0) < 0) - { + { DBG(1, "sane_set_io_mode: error setting io mode\n"); return SANE_STATUS_IO_ERROR; } @@ -3823,8 +3823,8 @@ sane_get_select_fd (SANE_Handle handle, SANE_Int *fd) #ifdef NONBLOCKSUPPORTED if (s->fd < 0) - { - return SANE_STATUS_INVAL; + { + return SANE_STATUS_INVAL; } *fd = s->fd; @@ -3842,14 +3842,14 @@ sane_cancel (SANE_Handle handle) DBG(3, "sane_cancel called\n"); if (s->scanning) { - /* if batchmode is enabled, then call set_window to + /* if batchmode is enabled, then call set_window to * abort the batch */ if (_OPT_VAL_WORD(s, OPT_BATCH) == SANE_TRUE) { DBG(5, "sane_cancel: calling set_window to abort batch\n"); set_window(s, BH_BATCH_ABORT); - } + } } s->scanning = SANE_FALSE; s->cancelled = SANE_TRUE; @@ -3878,8 +3878,7 @@ sane_exit (void) next = dev->next; free (dev); } - + if (devlist) free (devlist); } - -- cgit v1.2.3