From 1687222e1b9e74c89cafbb5910e72d8ec7bfd40f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 31 Jul 2019 16:59:49 +0200 Subject: New upstream version 1.0.28 --- backend/genesys_gl843.cc | 4415 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4415 insertions(+) create mode 100644 backend/genesys_gl843.cc (limited to 'backend/genesys_gl843.cc') diff --git a/backend/genesys_gl843.cc b/backend/genesys_gl843.cc new file mode 100644 index 0000000..a72dc5a --- /dev/null +++ b/backend/genesys_gl843.cc @@ -0,0 +1,4415 @@ +/* sane - Scanner Access Now Easy. + + Copyright (C) 2010-2013 Stéphane Voltz + + + This file is part of the SANE package. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + As a special exception, the authors of SANE give permission for + additional uses of the libraries contained in this release of SANE. + + The exception is that, if you link a SANE library with other files + to produce an executable, this does not by itself cause the + resulting executable to be covered by the GNU General Public + License. Your use of that executable is in no way restricted on + account of linking the SANE library code into it. + + This exception does not, however, invalidate any other reasons why + the executable file might be covered by the GNU General Public + License. + + If you submit changes to SANE to the maintainers to be included in + a subsequent release, you agree by submitting the changes that + those changes may be distributed with this exception intact. + + If you write modifications of your own for SANE, it is your choice + whether to permit this exception to apply to your modifications. + If you do not wish that, delete this exception notice. +*/ + +#define DEBUG_DECLARE_ONLY + +#include "genesys_gl843.h" + +#include +#include + +/**************************************************************************** + Low level function + ****************************************************************************/ + +/* ------------------------------------------------------------------------ */ +/* Read and write RAM, registers and AFE */ +/* ------------------------------------------------------------------------ */ + +/* Set address for writing data */ +static SANE_Status +gl843_set_buffer_address (Genesys_Device * dev, uint32_t addr) +{ + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_io, "%s: setting address to 0x%05x\n", __func__, addr & 0xffff); + + status = sanei_genesys_write_register (dev, 0x5b, ((addr >> 8) & 0xff)); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while writing high byte: %s\n", __func__, sane_strstatus(status)); + return status; + } + + status = sanei_genesys_write_register (dev, 0x5c, (addr & 0xff)); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while writing low byte: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBG(DBG_io, "%s: completed\n", __func__); + + return status; +} + +/** + * writes a block of data to RAM + * @param dev USB device + * @param addr RAM address to write to + * @param size size of the chunk of data + * @param data pointer to the data to write + */ +static SANE_Status +write_data (Genesys_Device * dev, uint32_t addr, uint32_t size, + uint8_t * data) +{ + SANE_Status status = SANE_STATUS_GOOD; + + DBGSTART; + + status = gl843_set_buffer_address (dev, addr); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while setting address for bulk write data: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + /* write actual data */ + status = sanei_genesys_bulk_write_data(dev, 0x28, data, size); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while writing bulk write data: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + /* set back address to 0 */ + status = gl843_set_buffer_address (dev, 0); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed setting to default RAM address: %s\n", __func__, + sane_strstatus(status)); + return status; + } + DBGCOMPLETED; + return status; +} + +/**************************************************************************** + Mid level functions + ****************************************************************************/ + +static SANE_Bool +gl843_get_fast_feed_bit (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + + r = sanei_genesys_get_address (regs, REG02); + if (r && (r->value & REG02_FASTFED)) + return SANE_TRUE; + return SANE_FALSE; +} + +static SANE_Bool +gl843_get_filter_bit (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + + r = sanei_genesys_get_address (regs, REG04); + if (r && (r->value & REG04_FILTER)) + return SANE_TRUE; + return SANE_FALSE; +} + +static SANE_Bool +gl843_get_lineart_bit (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + + r = sanei_genesys_get_address (regs, REG04); + if (r && (r->value & REG04_LINEART)) + return SANE_TRUE; + return SANE_FALSE; +} + +static SANE_Bool +gl843_get_bitset_bit (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + + r = sanei_genesys_get_address (regs, REG04); + if (r && (r->value & REG04_BITSET)) + return SANE_TRUE; + return SANE_FALSE; +} + +static SANE_Bool +gl843_get_gain4_bit (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + + r = sanei_genesys_get_address (regs, REG06); + if (r && (r->value & REG06_GAIN4)) + return SANE_TRUE; + return SANE_FALSE; +} + +/** + * compute the step multiplier used + */ +static int +gl843_get_step_multiplier (Genesys_Register_Set * regs) +{ + GenesysRegister *r = NULL; + int value = 1; + + r = sanei_genesys_get_address (regs, REG9D); + if (r != NULL) + { + switch (r->value & 0x0c) + { + case 0x04: + value = 2; + break; + case 0x08: + value = 4; + break; + default: + value = 1; + } + } + DBG(DBG_io, "%s: step multiplier is %d\n", __func__, value); + return value; +} + +static SANE_Bool +gl843_test_buffer_empty_bit (SANE_Byte val) +{ + if (val & REG41_BUFEMPTY) + return SANE_TRUE; + return SANE_FALSE; +} + +static SANE_Bool +gl843_test_motor_flag_bit (SANE_Byte val) +{ + if (val & REG41_MOTORENB) + return SANE_TRUE; + return SANE_FALSE; +} + +/** copy sensor specific settings */ +static void +gl843_setup_sensor (Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set * regs, int dpi,int flags) +{ + (void) dpi; + (void) flags; + + DBGSTART; + + for (const auto& custom_reg : sensor.custom_regs) { + regs->set8(custom_reg.address, custom_reg.value); + } + if (!(dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE)) { + regs->set8(0x7d, 0x90); + } + + DBGCOMPLETED; +} + + +/** @brief set all registers to default values . + * This function is called only once at the beginning and + * fills register startup values for registers reused across scans. + * Those that are rarely modified or not modified are written + * individually. + * @param dev device structure holding register set to initialize + */ +static void +gl843_init_registers (Genesys_Device * dev) +{ + // Within this function SENSOR_DEF marker documents that a register is part + // of the sensors definition and the actual value is set in + // gl843_setup_sensor(). + + DBGSTART; + + dev->reg.clear(); + + /* default to KV-SS080 */ + SETREG (0xa2, 0x0f); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0xa2, 0x1f); + } + SETREG (0x01, 0x00); + SETREG (0x02, 0x78); + SETREG (0x03, 0x1f); + SETREG (0x04, 0x10); + + // fine tune upon device description + SETREG (0x05, 0x80); + if (dev->model->model_id == MODEL_HP_SCANJET_G4010 || + dev->model->model_id == MODEL_HP_SCANJET_G4050 || + dev->model->model_id == MODEL_HP_SCANJET_4850C) + { + SETREG (0x05, 0x08); + } + + dev->reg.find_reg(0x05).value &= ~REG05_DPIHW; + switch (sanei_genesys_find_sensor_any(dev).optical_res) + { + case 600: + dev->reg.find_reg(0x05).value |= REG05_DPIHW_600; + break; + case 1200: + dev->reg.find_reg(0x05).value |= REG05_DPIHW_1200; + break; + case 2400: + dev->reg.find_reg(0x05).value |= REG05_DPIHW_2400; + break; + case 4800: + dev->reg.find_reg(0x05).value |= REG05_DPIHW_4800; + break; + } + + // TODO: on 8600F the windows driver turns off GAIN4 which is recommended + SETREG (0x06, 0xd8); /* SCANMOD=110, PWRBIT and GAIN4 */ + SETREG (0x08, 0x00); + SETREG (0x09, 0x00); + SETREG (0x0a, 0x00); + + // This register controls clock and RAM settings and is further modified in + // gl843_boot + SETREG (0x0b, 0x6a); + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x0b, 0x89); + } + + // EXPR[0:15], EXPG[0:15], EXPB[0:15]: Exposure time settings. + SETREG(0x10, 0x00); // SENSOR_DEF + SETREG(0x11, 0x00); // SENSOR_DEF + SETREG(0x12, 0x00); // SENSOR_DEF + SETREG(0x13, 0x00); // SENSOR_DEF + SETREG(0x14, 0x00); // SENSOR_DEF + SETREG(0x15, 0x00); // SENSOR_DEF + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + dev->reg.set16(REG_EXPR, 0x9c40); + dev->reg.set16(REG_EXPG, 0x9c40); + dev->reg.set16(REG_EXPB, 0x9c40); + } + // CCD signal settings. + SETREG(0x16, 0x33); // SENSOR_DEF + SETREG(0x17, 0x1c); // SENSOR_DEF + SETREG(0x18, 0x10); // SENSOR_DEF + + // EXPDMY[0:7]: Exposure time of dummy lines. + SETREG(0x19, 0x2a); // SENSOR_DEF + + // Various CCD clock settings. + SETREG(0x1a, 0x04); // SENSOR_DEF + SETREG(0x1b, 0x00); // SENSOR_DEF + SETREG(0x1c, 0x20); // SENSOR_DEF + SETREG(0x1d, 0x04); // SENSOR_DEF + + SETREG (0x1e, 0x10); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x1e, 0x20); + } + + SETREG (0x1f, 0x01); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x1f, 0xff); + } + + SETREG (0x20, 0x10); + SETREG (0x21, 0x04); + SETREG (0x22, 0x01); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x22, 0xc8); + } + + SETREG (0x23, 0x01); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x23, 0xc8); + } + + SETREG (0x24, 0x04); + SETREG (0x25, 0x00); + SETREG (0x26, 0x00); + SETREG (0x27, 0x00); + SETREG (0x2c, 0x02); + SETREG (0x2d, 0x58); + // BWHI[0:7]: high level of black and white threshold + SETREG (0x2e, 0x80); + // BWLOW[0:7]: low level of black and white threshold + SETREG (0x2f, 0x80); + SETREG (0x30, 0x00); + SETREG (0x31, 0x14); + SETREG (0x32, 0x27); + SETREG (0x33, 0xec); + + // DUMMY: CCD dummy and optically black pixel count + SETREG (0x34, 0x24); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x34, 0x14); + } + + // MAXWD: If available buffer size is less than 2*MAXWD words, then + // "buffer full" state will be set. + SETREG (0x35, 0x00); + SETREG (0x36, 0xff); + SETREG (0x37, 0xff); + + // LPERIOD: Line period or exposure time for CCD or CIS. + SETREG(0x38, 0x55); // SENSOR_DEF + SETREG(0x39, 0xf0); // SENSOR_DEF + + // FEEDL[0:24]: The number of steps of motor movement. + SETREG(0x3d, 0x00); + SETREG (0x3e, 0x00); + SETREG (0x3f, 0x01); + + // Latch points for high and low bytes of R, G and B channels of AFE. If + // multiple clocks per pixel are consumed, then the setting defines during + // which clock the corresponding value will be read. + // RHI[0:4]: The latch point for high byte of R channel. + // RLOW[0:4]: The latch point for low byte of R channel. + // GHI[0:4]: The latch point for high byte of G channel. + // GLOW[0:4]: The latch point for low byte of G channel. + // BHI[0:4]: The latch point for high byte of B channel. + // BLOW[0:4]: The latch point for low byte of B channel. + SETREG(0x52, 0x01); // SENSOR_DEF + SETREG(0x53, 0x04); // SENSOR_DEF + SETREG(0x54, 0x07); // SENSOR_DEF + SETREG(0x55, 0x0a); // SENSOR_DEF + SETREG(0x56, 0x0d); // SENSOR_DEF + SETREG(0x57, 0x10); // SENSOR_DEF + + // VSMP[0:4]: The position of the image sampling pulse for AFE in cycles. + // VSMPW[0:2]: The length of the image sampling pulse for AFE in cycles. + SETREG(0x58, 0x1b); // SENSOR_DEF + + SETREG(0x59, 0x00); // SENSOR_DEF + SETREG(0x5a, 0x40); // SENSOR_DEF + + // 0x5b-0x5c: GMMADDR[0:15] address for gamma or motor tables download + // SENSOR_DEF + + // DECSEL[0:2]: The number of deceleratino steps after touching home sensor + // STOPTIM[0:4]: The stop duration between change of directions in + // backtracking + SETREG (0x5e, 0x23); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x5e, 0x1f); + } + + // FMOVDEC: The number of deceleration steps in table 5 for auto-go-home + SETREG (0x5f, 0x01); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x5f, 0xf0); + } + + // Z1MOD[0:20] + SETREG (0x60, 0x00); + SETREG (0x61, 0x00); + SETREG (0x62, 0x00); + + // Z2MOD[0:20] + SETREG (0x63, 0x00); + SETREG (0x64, 0x00); + SETREG (0x65, 0x00); + + // STEPSEL[0:1]. Motor movement step mode selection for tables 1-3 in + // scanning mode. + // MTRPWM[0:5]. Motor phase PWM duty cycle setting for tables 1-3 + SETREG (0x67, 0x7f); + // FSTPSEL[0:1]: Motor movement step mode selection for tables 4-5 in + // command mode. + // FASTPWM[5:0]: Motor phase PWM duty cycle setting for tables 4-5 + SETREG (0x68, 0x7f); + + // FSHDEC[0:7]: The number of deceleration steps after scanning is finished + // (table 3) + SETREG (0x69, 0x01); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x69, 64); + } + + // FMOVNO[0:7] The number of acceleration or deceleration steps for fast + // moving (table 4) + SETREG (0x6a, 0x04); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x69, 64); + } + + // GPIO-related register bits + SETREG (0x6b, 0x30); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x6b, 0x72); + } + + // 0x6c, 0x6d, 0x6e, 0x6f are set according to gpio tables. See + // gl843_init_gpio. + + // RSH[0:4]: The position of rising edge of CCD RS signal in cycles + // RSL[0:4]: The position of falling edge of CCD RS signal in cycles + // CPH[0:4]: The position of rising edge of CCD CP signal in cycles. + // CPL[0:4]: The position of falling edge of CCD CP signal in cycles + SETREG(0x70, 0x01); // SENSOR_DEF + SETREG(0x71, 0x03); // SENSOR_DEF + SETREG (0x72, 0x04); + SETREG (0x73, 0x05); + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x70, 0x00); + SETREG(0x71, 0x02); + SETREG(0x72, 0x02); + SETREG(0x73, 0x04); + } + + // CK1MAP[0:17], CK3MAP[0:17], CK4MAP[0:17]: CCD clock bit mapping setting. + SETREG(0x74, 0x00); // SENSOR_DEF + SETREG(0x75, 0x00); // SENSOR_DEF + SETREG(0x76, 0x3c); // SENSOR_DEF + SETREG(0x77, 0x00); // SENSOR_DEF + SETREG(0x78, 0x00); // SENSOR_DEF + SETREG(0x79, 0x9f); // SENSOR_DEF + SETREG(0x7a, 0x00); // SENSOR_DEF + SETREG(0x7b, 0x00); // SENSOR_DEF + SETREG(0x7c, 0x55); // SENSOR_DEF + + // various AFE settings + SETREG(0x7d, 0x00); + + // GPOLED[x]: LED vs GPIO settings + SETREG(0x7e, 0x00); + + // BSMPDLY, VSMPDLY + // LEDCNT[0:1]: Controls led blinking and its period + SETREG (0x7f, 0x00); + + // VRHOME, VRMOVE, VRBACK, VRSCAN: Vref settings of the motor driver IC for + // moving in various situations. + SETREG (0x80, 0x00); + + if (dev->model->model_id != MODEL_CANON_CANOSCAN_4400F) + { + // NOTE: Historical code. None of the following 6 registers are + // documented in the datasheet. Their default value is 0, so probably it's + // not a bad idea to leave this here. + SETREG (0x81, 0x00); + SETREG (0x82, 0x00); + SETREG (0x83, 0x00); + SETREG (0x84, 0x00); + SETREG (0x85, 0x00); + SETREG (0x86, 0x00); + } + + SETREG (0x87, 0x00); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x87, 0x02); + } + + // MTRPLS[0:7]: The width of the ADF motor trigger signal pulse. + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x94, 0xff); + } + + // 0x95-0x97: SCANLEN[0:19]: Controls when paper jam bit is set in sheetfed + // scanners. + + // ONDUR[0:15]: The duration of PWM ON phase for LAMP control + // OFFDUR[0:15]: The duration of PWM OFF phase for LAMP control + // both of the above are in system clocks + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x98, 0x00); + SETREG(0x99, 0x00); + SETREG(0x9a, 0x00); + SETREG(0x9b, 0x00); + } + + // RMADLY[0:1], MOTLAG, CMODE, STEPTIM, MULDMYLN, IFRS + SETREG(0x9d, 0x04); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0x9d, 0x08); // additionally sets the multiplier for slope tables + } + + + // SEL3INV, TGSTIME[0:2], TGWTIME[0:2] + SETREG (0x9e, 0x00); // SENSOR_DEF + + // RFHSET[0:4]: Refresh time of SDRAM in units of 2us + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0xa2, 0x1f); + } + + // 0xa6-0xa9: controls gpio, see gl843_gpio_init + + // GPOM9, MULSTOP[0-2], NODECEL, TB3TB1, TB5TB2, FIX16CLK. + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0xab, 0x00); + } + + // VRHOME[3:2], VRMOVE[3:2], VRBACK[3:2]: Vref setting of the motor driver IC + // for various situations. + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + SETREG(0xac, 0x00); + } + + if (dev->model->model_id != MODEL_CANON_CANOSCAN_8400F) + { + SETREG (0x0c, 0x00); + SETREG (0x94, 0xff); + SETREG (0xab, 0x50); + } + + if (dev->model->model_id != MODEL_CANON_CANOSCAN_4400F + && dev->model->model_id != MODEL_CANON_CANOSCAN_8400F) + { + SETREG (0xaa, 0x00); + } + + /* G4050 values */ + if (dev->model->model_id == MODEL_HP_SCANJET_G4010 || + dev->model->model_id == MODEL_HP_SCANJET_G4050 || + dev->model->model_id == MODEL_HP_SCANJET_4850C) + { + SETREG (0x03, 0x1d); + SETREG (0x06, 0xd0); /* SCANMOD=110, PWRBIT and no GAIN4 */ + SETREG (0x06, 0xd8); /* SCANMOD=110, PWRBIT and GAIN4 */ + SETREG (0x0a, 0x18); + SETREG (0x0b, 0x69); + + /* CIS exposure is used for XPA lamp movement */ + SETREG (0x10, 0x2c); + SETREG (0x11, 0x09); + SETREG (0x12, 0x22); + SETREG (0x13, 0xb8); + SETREG (0x14, 0x10); + SETREG (0x15, 0xf0); + + SETREG (0x6b, 0xf4); + + SETREG (0x70, 0x00); + SETREG (0x71, 0x02); + SETREG (0x72, 0x00); + SETREG (0x73, 0x00); + + SETREG (0x80, 0x50); + SETREG (0x9d, 0x08); + SETREG (0xab, 0x40); + + /* XXX STEF XXX TODO move to set for scan */ + SETREG (0x98, 0x03); + SETREG (0x99, 0x30); + SETREG (0x9a, 0x01); + SETREG (0x9b, 0x80); + SETREG (0xac, 0x00); + } + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_4400F) + { + SETREG (0x06, 0xf0); /* SCANMOD=111, PWRBIT and no GAIN4 */ + SETREG (0x0b, 0x69); /* 16M only */ + SETREG (0x1e, 0x20); + SETREG (0x22, 0xc8); + SETREG (0x23, 0xc8); + SETREG (0x5e, 0x3f); + SETREG (0x5f, 0xf0); + SETREG (0x6b, 0x72); + SETREG (0x72, 0x01); + SETREG (0x73, 0x03); + SETREG (0x80, 0x0c); + SETREG (0x87, 0x02); /* MCLOCK -> CK4MAP */ + SETREG (0x9d, 0x08); /* STEPTIM=2 */ + SETREG (0xa2, 0x1f); + SETREG (0xab, 0x00); + sanei_genesys_set_double(&dev->reg,REG_EXPR,0x9c40); + sanei_genesys_set_double(&dev->reg,REG_EXPG,0x9c40); + sanei_genesys_set_double(&dev->reg,REG_EXPB,0x9c40); + } + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8400F) + { + SETREG (0x03, 0x1c); + SETREG (0x06, 0xd0); /* SCANMOD=110, PWRBIT and no GAIN4 */ + SETREG (0x0a, 0x10); + SETREG (0x22, 0x50); + SETREG (0x23, 0x50); + SETREG (0x5e, 0x85); + SETREG (0x6b, 0xb1); + SETREG (0x1e, 0xa0); + SETREG (0x72, 0x03); + SETREG (0x73, 0x04); + SETREG (0x7d, 0x20); + SETREG (0x80, 0x28); + SETREG (0x87, 0x02); /* MCLOCK -> CK4MAP */ + SETREG (0x9d, 0x08); /* STEPTIM=2 */ + } + + dev->calib_reg = dev->reg; + + DBGCOMPLETED; +} + +/* Send slope table for motor movement + slope_table in machine byte order + */ +static SANE_Status +gl843_send_slope_table (Genesys_Device * dev, int table_nr, + uint16_t * slope_table, int steps) +{ + SANE_Status status = SANE_STATUS_GOOD; + int i; + char msg[10000]; + + DBG(DBG_proc, "%s (table_nr = %d, steps = %d)\n", __func__, table_nr, steps); + + std::vector table(steps * 2); + for (i = 0; i < steps; i++) + { + table[i * 2] = slope_table[i] & 0xff; + table[i * 2 + 1] = slope_table[i] >> 8; + } + + if (DBG_LEVEL >= DBG_io) + { + sprintf (msg, "write slope %d (%d)=", table_nr, steps); + for (i = 0; i < steps; i++) + { + sprintf (msg+strlen(msg), "%d", slope_table[i]); + } + DBG(DBG_io, "%s: %s\n", __func__, msg); + } + + + /* slope table addresses are fixed : 0x4000, 0x4800, 0x5000, 0x5800, 0x6000 */ + /* XXX STEF XXX USB 1.1 ? sanei_genesys_write_0x8c (dev, 0x0f, 0x14); */ + status = write_data (dev, 0x4000 + 0x800 * table_nr, steps * 2, table.data()); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: write data failed writing slope table %d (%s)\n", __func__, table_nr, + sane_strstatus(status)); + } + + DBGCOMPLETED; + return status; +} + + +/* Set values of analog frontend */ +static SANE_Status +gl843_set_fe (Genesys_Device * dev, const Genesys_Sensor& sensor, uint8_t set) +{ + (void) sensor; + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + int i; + + DBG(DBG_proc, "%s (%s)\n", __func__, set == AFE_INIT ? "init" : set == AFE_SET ? "set" : set == + AFE_POWER_SAVE ? "powersave" : "huh?"); + + if (set == AFE_INIT) + { + DBG(DBG_proc, "%s(): setting DAC %u\n", __func__, dev->model->dac_type); + dev->frontend = dev->frontend_initial; + } + + /* check analog frontend type */ + // FIXME: looks like we write to that register with initial data + RIE (sanei_genesys_read_register (dev, REG04, &val)); + if ((val & REG04_FESET) != 0x00) + { + /* for now there is no support for AD fe */ + DBG(DBG_proc, "%s(): unsupported frontend type %d\n", __func__, + dev->reg.find_reg(0x04).value & REG04_FESET); + return SANE_STATUS_UNSUPPORTED; + } + + DBG(DBG_proc, "%s(): frontend reset complete\n", __func__); + + for (i = 1; i <= 3; i++) + { + // FIXME: BUG: we should initialize dev->frontend before first use. Right now it's + // initialized during genesys_coarse_calibration() + if (dev->frontend.regs.empty()) { + status = sanei_genesys_fe_write_data(dev, i, 0x00); + } else { + status = sanei_genesys_fe_write_data(dev, i, dev->frontend.regs.get_value(0x00 + i)); + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: writing reg[%d] failed: %s\n", __func__, i, sane_strstatus(status)); + return status; + } + } + for (const auto& reg : sensor.custom_fe_regs) { + status = sanei_genesys_fe_write_data(dev, reg.address, reg.value); + if (status != SANE_STATUS_GOOD) { + DBG(DBG_error, "%s: writing reg[%d] failed: %s\n", __func__, i, sane_strstatus(status)); + return status; + } + } + + for (i = 0; i < 3; i++) + { + // FIXME: BUG: see above + if (dev->frontend.regs.empty()) { + status = sanei_genesys_fe_write_data(dev, 0x20 + i, 0x00); + } else { + status = sanei_genesys_fe_write_data(dev, 0x20 + i, dev->frontend.get_offset(i)); + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: writing offset[%d] failed: %s\n", __func__, i, + sane_strstatus(status)); + return status; + } + } + + if (dev->model->ccd_type == CCD_KVSS080) + { + for (i = 0; i < 3; i++) + { + // FIXME: BUG: see above + if (dev->frontend.regs.empty()) { + status = sanei_genesys_fe_write_data(dev, 0x24 + i, 0x00); + } else { + status = sanei_genesys_fe_write_data(dev, 0x24 + i, + dev->frontend.regs.get_value(0x24 + i)); + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: writing sign[%d] failed: %s\n", __func__, i, + sane_strstatus(status)); + return status; + } + } + } + + for (i = 0; i < 3; i++) + { + // FIXME: BUG: see above + if (dev->frontend.regs.empty()) { + status = sanei_genesys_fe_write_data(dev, 0x28 + i, 0x00); + } else { + status = sanei_genesys_fe_write_data(dev, 0x28 + i, dev->frontend.get_gain(i)); + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: writing gain[%d] failed: %s\n", __func__, i, sane_strstatus(status)); + return status; + } + } + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + + +static SANE_Status +gl843_init_motor_regs_scan (Genesys_Device * dev, + const Genesys_Sensor& sensor, + Genesys_Register_Set * reg, + unsigned int exposure, + float scan_yres, + int scan_step_type, + unsigned int scan_lines, + unsigned int scan_dummy, + unsigned int feed_steps, + int scan_power_mode, + unsigned int flags) +{ + SANE_Status status = SANE_STATUS_GOOD; + int use_fast_fed, coeff; + unsigned int lincnt; + uint16_t scan_table[1024]; + uint16_t fast_table[1024]; + int scan_steps,fast_steps, fast_step_type; + unsigned int feedl,factor,dist; + GenesysRegister *r; + uint32_t z1, z2; + + DBGSTART; + DBG(DBG_info, "%s : exposure=%d, scan_yres=%g, scan_step_type=%d, scan_lines=%d, scan_dummy=%d, " + "feed_steps=%d, scan_power_mode=%d, flags=%x\n", __func__, exposure, scan_yres, + scan_step_type, scan_lines, scan_dummy, feed_steps, scan_power_mode, flags); + + /* get step multiplier */ + factor = gl843_get_step_multiplier (reg); + + use_fast_fed = 0; + + if((scan_yres>=300 && feed_steps>900) || (flags & MOTOR_FLAG_FEED)) + use_fast_fed=1; + + lincnt=scan_lines; + sanei_genesys_set_triple(reg,REG_LINCNT,lincnt); + DBG(DBG_io, "%s: lincnt=%d\n", __func__, lincnt); + + /* compute register 02 value */ + r = sanei_genesys_get_address (reg, REG02); + r->value = 0x00; + sanei_genesys_set_motor_power(*reg, true); + + if (use_fast_fed) + r->value |= REG02_FASTFED; + else + r->value &= ~REG02_FASTFED; + + /* in case of automatic go home, move until home sensor */ + if (flags & MOTOR_FLAG_AUTO_GO_HOME) + r->value |= REG02_AGOHOME | REG02_NOTHOME; + + /* disable backtracking */ + if ((flags & MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE) + ||(scan_yres>=2400) + ||(scan_yres>=sensor.optical_res)) + r->value |= REG02_ACDCDIS; + + /* scan and backtracking slope table */ + sanei_genesys_slope_table(scan_table, + &scan_steps, + scan_yres, + exposure, + dev->motor.base_ydpi, + scan_step_type, + factor, + dev->model->motor_type, + gl843_motors); + RIE(gl843_send_slope_table (dev, SCAN_TABLE, scan_table, scan_steps*factor)); + RIE(gl843_send_slope_table (dev, BACKTRACK_TABLE, scan_table, scan_steps*factor)); + + /* STEPNO */ + r = sanei_genesys_get_address (reg, REG_STEPNO); + r->value = scan_steps; + + /* FSHDEC */ + r = sanei_genesys_get_address (reg, REG_FSHDEC); + r->value = scan_steps; + + /* fast table */ + fast_step_type=0; + if(scan_step_type<=fast_step_type) + { + fast_step_type=scan_step_type; + } + sanei_genesys_slope_table(fast_table, + &fast_steps, + sanei_genesys_get_lowest_ydpi(dev), + exposure, + dev->motor.base_ydpi, + fast_step_type, + factor, + dev->model->motor_type, + gl843_motors); + RIE(gl843_send_slope_table (dev, STOP_TABLE, fast_table, fast_steps*factor)); + RIE(gl843_send_slope_table (dev, FAST_TABLE, fast_table, fast_steps*factor)); + RIE(gl843_send_slope_table (dev, HOME_TABLE, fast_table, fast_steps*factor)); + + /* FASTNO */ + r = sanei_genesys_get_address (reg, REG_FASTNO); + r->value = fast_steps; + + /* FMOVNO */ + r = sanei_genesys_get_address (reg, REG_FMOVNO); + r->value = fast_steps; + + /* substract acceleration distance from feedl */ + feedl=feed_steps; + feedl<<=scan_step_type; + + dist = scan_steps; + if (use_fast_fed) + { + dist += fast_steps*2; + } + DBG(DBG_io2, "%s: acceleration distance=%d\n", __func__, dist); + + /* get sure when don't insane value : XXX STEF XXX in this case we should + * fall back to single table move */ + if(dist600) + { + z1=0; + z2=0; + } + + sanei_genesys_set_triple(reg,REG_Z1MOD,z1); + DBG(DBG_info, "%s: z1 = %d\n", __func__, z1); + + sanei_genesys_set_triple(reg,REG_Z2MOD,z2); + DBG(DBG_info, "%s: z2 = %d\n", __func__, z2); + + r = sanei_genesys_get_address (reg, REG1E); + r->value &= 0xf0; /* 0 dummy lines */ + r->value |= scan_dummy; /* dummy lines */ + + r = sanei_genesys_get_address (reg, REG67); + r->value = 0x3f | (scan_step_type << REG67S_STEPSEL); + + r = sanei_genesys_get_address (reg, REG68); + r->value = 0x3f | (scan_step_type << REG68S_FSTPSEL); + + /* steps for STOP table */ + r = sanei_genesys_get_address (reg, REG_FMOVDEC); + r->value = fast_steps; + + /* Vref XXX STEF XXX : optical divider or step type ? */ + r = sanei_genesys_get_address (reg, 0x80); + if (!(dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE)) + { + r->value = 0x50; + coeff=sensor.optical_res/sanei_genesys_compute_dpihw(dev, sensor, scan_yres); + if (dev->model->motor_type == MOTOR_KVSS080) + { + if(coeff>=1) + { + r->value |= 0x05; + } + } + else { + switch(coeff) + { + case 4: + r->value |= 0x0a; + break; + case 2: + r->value |= 0x0f; + break; + case 1: + r->value |= 0x0f; + break; + } + } + } + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + + +/** @brief setup optical related registers + * start and pixels are expressed in optical sensor resolution coordinate + * space. + * @param dev device to use + * @param reg registers to set up + * @param exposure exposure time to use + * @param used_res scanning resolution used, may differ from + * scan's one + * @param start logical start pixel coordinate + * @param pixels logical number of pixels to use + * @param channels number of color channles used (1 or 3) + * @param depth bit depth of the scan (1, 8 or 16 bits) + * @param ccd_size_divisor SANE_TRUE specifies how much x coordinates must be shrunk + * @param color_filter to choose the color channel used in gray scans + * @param flags to drive specific settings such no calibration, XPA use ... + * @return SANE_STATUS_GOOD if OK + */ +static SANE_Status +gl843_init_optical_regs_scan (Genesys_Device * dev, + const Genesys_Sensor& sensor, + Genesys_Register_Set * reg, + unsigned int exposure, + int used_res, + unsigned int start, + unsigned int pixels, + int channels, + int depth, + unsigned ccd_size_divisor, + ColorFilter color_filter, + int flags) +{ + unsigned int words_per_line; + unsigned int startx, endx, used_pixels; + unsigned int dpiset, dpihw, factor; + unsigned int bytes; + unsigned int tgtime; /**> exposure time multiplier */ + unsigned int cksel; /**> clock per system pixel time in capturing image */ + GenesysRegister *r; + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_proc, "%s : exposure=%d, used_res=%d, start=%d, pixels=%d, channels=%d, depth=%d, " + "ccd_size_divisor=%d, flags=%x\n", __func__, exposure, used_res, start, pixels, channels, + depth, ccd_size_divisor, flags); + + /* tgtime */ + tgtime = exposure / 65536 + 1; + DBG(DBG_io2, "%s: tgtime=%d\n", __func__, tgtime); + + /* to manage high resolution device while keeping good + * low resolution scanning speed, we make hardware dpi vary */ + dpihw=sanei_genesys_compute_dpihw(dev, sensor, used_res); + factor=sensor.optical_res/dpihw; + DBG(DBG_io2, "%s: dpihw=%d (factor=%d)\n", __func__, dpihw, factor); + + /* sensor parameters */ + gl843_setup_sensor (dev, sensor, reg, dpihw, flags); + + /* resolution is divided according to CKSEL which is known once sensor is set up */ + r = sanei_genesys_get_address (reg, REG18); + cksel= (r->value & REG18_CKSEL)+1; + DBG(DBG_io2, "%s: cksel=%d\n", __func__, cksel); + dpiset = used_res * cksel; + + /* start and end coordinate in optical dpi coordinates */ + startx = (start + sensor.dummy_pixel)/cksel; + + used_pixels=pixels/cksel; + endx = startx + used_pixels; + + /* pixel coordinate factor correction when used dpihw is not maximal one */ + startx/=factor; + endx/=factor; + used_pixels=endx-startx; + + /* in case of stagger we have to start at an odd coordinate */ + if ((flags & OPTICAL_FLAG_STAGGER) + &&((startx & 1)==0)) + { + startx++; + endx++; + } + + status = gl843_set_fe(dev, sensor, AFE_SET); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set frontend: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* enable shading */ + r = sanei_genesys_get_address (reg, REG01); + r->value &= ~REG01_SCAN; + if ((flags & OPTICAL_FLAG_DISABLE_SHADING) || (dev->model->flags & GENESYS_FLAG_NO_CALIBRATION)) + { + r->value &= ~REG01_DVDSET; + } + else + { + r->value |= REG01_DVDSET; + } + if(dpihw>600) + { + r->value |= REG01_SHDAREA; + } + else + { + r->value &= ~REG01_SHDAREA; + } + + r = sanei_genesys_get_address (reg, REG03); + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + r->value |= REG03_AVEENB; + else { + r->value &= ~REG03_AVEENB; + } + + // FIXME: we probably don't need to set exposure to registers at this point. It was this way + // before a refactor. + sanei_genesys_set_lamp_power(dev, sensor, *reg, !(flags & OPTICAL_FLAG_DISABLE_LAMP)); + + /* select XPA */ + r->value &= ~REG03_XPASEL; + if (flags & OPTICAL_FLAG_USE_XPA) + { + r->value |= REG03_XPASEL; + } + reg->state.is_xpa_on = flags & OPTICAL_FLAG_USE_XPA; + + /* BW threshold */ + r = sanei_genesys_get_address (reg, REG2E); + r->value = dev->settings.threshold; + r = sanei_genesys_get_address (reg, REG2F); + r->value = dev->settings.threshold; + + /* monochrome / color scan */ + r = sanei_genesys_get_address (reg, REG04); + switch (depth) + { + case 1: + r->value &= ~REG04_BITSET; + r->value |= REG04_LINEART; + break; + case 8: + r->value &= ~(REG04_LINEART | REG04_BITSET); + break; + case 16: + r->value &= ~REG04_LINEART; + r->value |= REG04_BITSET; + break; + } + + r->value &= ~(REG04_FILTER | REG04_AFEMOD); + if (channels == 1) + { + switch (color_filter) + { + case ColorFilter::RED: + r->value |= 0x14; + break; + case ColorFilter::BLUE: + r->value |= 0x1c; + break; + case ColorFilter::GREEN: + r->value |= 0x18; + break; + default: + break; // should not happen + } + } + else + r->value |= 0x10; /* mono */ + + /* register 05 */ + r = sanei_genesys_get_address (reg, REG05); + + /* set up dpihw */ + r->value &= ~REG05_DPIHW; + switch(dpihw) + { + case 600: + r->value |= REG05_DPIHW_600; + break; + case 1200: + r->value |= REG05_DPIHW_1200; + break; + case 2400: + r->value |= REG05_DPIHW_2400; + break; + case 4800: + r->value |= REG05_DPIHW_4800; + break; + } + + /* enable gamma tables */ + if (flags & OPTICAL_FLAG_DISABLE_GAMMA) + r->value &= ~REG05_GMMENB; + else + r->value |= REG05_GMMENB; + + sanei_genesys_set_double(reg, REG_DPISET, dpiset * ccd_size_divisor); + DBG(DBG_io2, "%s: dpiset used=%d\n", __func__, dpiset * ccd_size_divisor); + + sanei_genesys_set_double(reg, REG_STRPIXEL, startx); + sanei_genesys_set_double(reg, REG_ENDPIXEL, endx); + + /* words(16bit) before gamma, conversion to 8 bit or lineart */ + words_per_line = (used_pixels * dpiset) / dpihw; + bytes = depth / 8; + if (depth == 1) + { + words_per_line = (words_per_line >> 3) + ((words_per_line & 7) ? 1 : 0); + } + else + { + words_per_line *= bytes; + } + + dev->wpl = words_per_line; + dev->bpl = words_per_line; + + DBG(DBG_io2, "%s: used_pixels=%d\n", __func__, used_pixels); + DBG(DBG_io2, "%s: pixels =%d\n", __func__, pixels); + DBG(DBG_io2, "%s: depth =%d\n", __func__, depth); + DBG(DBG_io2, "%s: dev->bpl =%lu\n", __func__, (unsigned long) dev->bpl); + DBG(DBG_io2, "%s: dev->len =%lu\n", __func__, (unsigned long)dev->len); + DBG(DBG_io2, "%s: dev->dist =%lu\n", __func__, (unsigned long)dev->dist); + + words_per_line *= channels; + + /* MAXWD is expressed in 2 words unit */ + /* nousedspace = (mem_bank_range * 1024 / 256 -1 ) * 4; */ + sanei_genesys_set_triple(reg,REG_MAXWD,(words_per_line)>>1); + DBG(DBG_io2, "%s: words_per_line used=%d\n", __func__, words_per_line); + + sanei_genesys_set_double(reg,REG_LPERIOD,exposure/tgtime); + DBG(DBG_io2, "%s: exposure used=%d\n", __func__, exposure/tgtime); + + r = sanei_genesys_get_address (reg, REG_DUMMY); + r->value = sensor.dummy_pixel; + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +struct ScanSession { + SetupParams params; + + // whether the session setup has been computed via gl843_compute_session() + bool computed = false; + + // whether CCD operates as half-resolution or full resolution at a specific resolution + unsigned ccd_size_divisor = 1; + + // the optical resolution of the scanner. + unsigned optical_resolution = 0; + + // the number of pixels at the optical resolution. + unsigned optical_pixels = 0; + + // the number of bytes in the output of a single line directly from scanner + unsigned optical_line_bytes = 0; + + // the resolution of the output data. + unsigned output_resolution = 0; + + // the number of pixels in output data + unsigned output_pixels = 0; + + // the number of bytes in the output of a single line + unsigned output_line_bytes = 0; + + // the number of lines in the output of the scanner. This must be larger than the user + // requested number due to line staggering and color channel shifting. + unsigned output_line_count = 0; + + // the number of staggered lines (i.e. lines that overlap during scanning due to line being + // thinner than the CCD element) + unsigned num_staggered_lines = 0; + + // the number of lines that color channels shift due to different physical positions of + // different color channels + unsigned max_color_shift_lines = 0; + + void assert_computed() const + { + if (!computed) { + throw std::runtime_error("ScanSession is not computed"); + } + } +}; + +static unsigned align_int_up(unsigned num, unsigned alignment) +{ + unsigned mask = alignment - 1; + if (num & mask) + num = (num & ~mask) + alignment; + return num; +} + +// computes physical parameters for specific scan setup +static void gl843_compute_session(Genesys_Device* dev, ScanSession& s, + const Genesys_Sensor& sensor) +{ + s.params.assert_valid(); + s.ccd_size_divisor = sensor.get_ccd_size_divisor_for_dpi(s.params.xres); + + s.optical_resolution = sensor.optical_res / s.ccd_size_divisor; + + if (s.params.flags & SCAN_FLAG_USE_OPTICAL_RES) { + s.output_resolution = s.optical_resolution; + } else { + // resolution is choosen from a fixed list and can be used directly + // unless we have ydpi higher than sensor's maximum one + if (s.params.xres > s.optical_resolution) + s.output_resolution = s.optical_resolution; + else + s.output_resolution = s.params.xres; + } + + // compute rounded up number of optical pixels + s.optical_pixels = (s.params.pixels * s.optical_resolution) / s.params.xres; + if (s.optical_pixels * s.params.xres < s.params.pixels * s.optical_resolution) + s.optical_pixels++; + + // ensure the number of optical pixels is divisible by 2. + // In quarter-CCD mode optical_pixels is 4x larger than the actual physical number + s.optical_pixels = align_int_up(s.optical_pixels, 2 * s.ccd_size_divisor); + + s.output_pixels = + (s.optical_pixels * s.output_resolution) / s.optical_resolution; + + // Note: staggering is not applied for calibration. Staggering starts at 2400 dpi + s.num_staggered_lines = 0; + if ((s.params.yres > 1200) && + ((s.params.flags & SCAN_FLAG_IGNORE_LINE_DISTANCE) == 0) && + (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE)) + { + s.num_staggered_lines = (4 * s.params.yres) / dev->motor.base_ydpi; + } + + s.max_color_shift_lines = sanei_genesys_compute_max_shift(dev, s.params.channels, + s.params.yres, s.params.flags); + + s.output_line_count = s.params.lines + s.max_color_shift_lines + s.num_staggered_lines; + + s.optical_line_bytes = (s.optical_pixels * s.params.channels * s.params.depth) / 8; + s.output_line_bytes = (s.output_pixels * s.params.channels * s.params.depth) / 8; + s.computed = true; +} + +/* set up registers for an actual scan + * + * this function sets up the scanner to scan in normal or single line mode + */ +static SANE_Status gl843_init_scan_regs(Genesys_Device* dev, const Genesys_Sensor& sensor, + Genesys_Register_Set* reg, + ScanSession& session) +{ + session.assert_computed(); + + int start; + int move; + unsigned int oflags, mflags; /**> optical and motor flags */ + int exposure; + + int slope_dpi = 0; + int dummy = 0; + int scan_step_type = 1; + int scan_power_mode = 0; + size_t requested_buffer_size, read_buffer_size; + + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_info, "%s ", __func__); + debug_dump(DBG_info, session.params); + + DBG(DBG_info, "%s : stagger=%d lines\n", __func__, session.num_staggered_lines); + + /* we enable true gray for cis scanners only, and just when doing + * scan since color calibration is OK for this mode + */ + oflags = 0; + if (session.params.flags & SCAN_FLAG_DISABLE_SHADING) + oflags |= OPTICAL_FLAG_DISABLE_SHADING; + if (session.params.flags & SCAN_FLAG_DISABLE_GAMMA) + oflags |= OPTICAL_FLAG_DISABLE_GAMMA; + if (session.params.flags & SCAN_FLAG_DISABLE_LAMP) + oflags |= OPTICAL_FLAG_DISABLE_LAMP; + if (session.params.flags & SCAN_FLAG_CALIBRATION) + oflags |= OPTICAL_FLAG_DISABLE_DOUBLE; + if (session.num_staggered_lines) + oflags |= OPTICAL_FLAG_STAGGER; + if (session.params.flags & SCAN_FLAG_USE_XPA) + oflags |= OPTICAL_FLAG_USE_XPA; + + + /* compute scan parameters values */ + /* pixels are allways given at full optical resolution */ + /* use detected left margin and fixed value */ + /* start */ + start = session.params.startx; + + dummy = 0; + /* dummy = 1; XXX STEF XXX */ + + /* slope_dpi */ + /* cis color scan is effectively a gray scan with 3 gray lines per color line and a FILTER of 0 */ + if (dev->model->is_cis) + slope_dpi = session.params.yres * session.params.channels; + else + slope_dpi = session.params.yres; + slope_dpi = slope_dpi * (1 + dummy); + + /* scan_step_type */ + exposure = sensor.exposure_lperiod; + if (exposure < 0) { + throw std::runtime_error("Exposure not defined in sensor definition"); + } + scan_step_type = sanei_genesys_compute_step_type(gl843_motors, dev->model->motor_type, exposure); + + DBG(DBG_info, "%s : exposure=%d pixels\n", __func__, exposure); + DBG(DBG_info, "%s : scan_step_type=%d\n", __func__, scan_step_type); + + /*** optical parameters ***/ + /* in case of dynamic lineart, we use an internal 8 bit gray scan + * to generate 1 lineart data */ + if (session.params.flags & SCAN_FLAG_DYNAMIC_LINEART) { + session.params.depth = 8; + } + + /* no 16 bit gamma for this ASIC */ + if (session.params.depth == 16) + { + session.params.flags |= SCAN_FLAG_DISABLE_GAMMA; + oflags |= OPTICAL_FLAG_DISABLE_GAMMA; + } + + /* now _LOGICAL_ optical values used are known, setup registers */ + status = gl843_init_optical_regs_scan (dev, sensor, + reg, + exposure, + session.output_resolution, + start, + session.optical_pixels, + session.params.channels, + session.params.depth, + session.ccd_size_divisor, + session.params.color_filter, + oflags); + if (status != SANE_STATUS_GOOD) + return status; + + /*** motor parameters ***/ + + /* it seems base_dpi of the G4050 motor is changed above 600 dpi*/ + if (dev->model->motor_type == MOTOR_G4050 && session.params.yres>600) + { + dev->ld_shift_r = (dev->model->ld_shift_r*3800)/dev->motor.base_ydpi; + dev->ld_shift_g = (dev->model->ld_shift_g*3800)/dev->motor.base_ydpi; + dev->ld_shift_b = (dev->model->ld_shift_b*3800)/dev->motor.base_ydpi; + } + else + { + dev->ld_shift_r = dev->model->ld_shift_r; + dev->ld_shift_g = dev->model->ld_shift_g; + dev->ld_shift_b = dev->model->ld_shift_b; + } + + /* add tl_y to base movement */ + move = session.params.starty; + DBG(DBG_info, "%s: move=%d steps\n", __func__, move); + + + mflags=0; + if(session.params.flags & SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE) + mflags|=MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE; + if(session.params.flags & SCAN_FLAG_FEEDING) + mflags|=MOTOR_FLAG_FEED; + if (session.params.flags & SCAN_FLAG_USE_XPA) + mflags |= MOTOR_FLAG_USE_XPA; + + status = gl843_init_motor_regs_scan (dev, sensor, + reg, + exposure, + slope_dpi, + scan_step_type, + dev->model->is_cis ? session.output_line_count * session.params.channels + : session.output_line_count, + dummy, + move, + scan_power_mode, + mflags); + if (status != SANE_STATUS_GOOD) + return status; + + /* since we don't have sheetfed scanners to handle, + * use huge read buffer */ + /* TODO find the best size according to settings */ + requested_buffer_size = 16 * session.output_line_bytes; + + read_buffer_size = + 2 * requested_buffer_size + + (session.max_color_shift_lines + session.num_staggered_lines) * session.optical_line_bytes; + + dev->read_buffer.clear(); + dev->read_buffer.alloc(read_buffer_size); + + dev->lines_buffer.clear(); + dev->lines_buffer.alloc(read_buffer_size); + + dev->shrink_buffer.clear(); + dev->shrink_buffer.alloc(requested_buffer_size); + + dev->out_buffer.clear(); + dev->out_buffer.alloc((8 * session.params.pixels * session.params.channels * + session.params.depth) / 8); + + dev->read_bytes_left = session.output_line_bytes * session.output_line_count; + + DBG(DBG_info, "%s: physical bytes to read = %lu\n", __func__, (u_long) dev->read_bytes_left); + dev->read_active = SANE_TRUE; + + dev->current_setup.params = session.params; + dev->current_setup.pixels = session.output_pixels; + DBG(DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels); + dev->current_setup.lines = session.output_line_count; + dev->current_setup.depth = session.params.depth; + dev->current_setup.channels = session.params.channels; + dev->current_setup.exposure_time = exposure; + dev->current_setup.xres = session.output_resolution; + dev->current_setup.yres = session.params.yres; + dev->current_setup.ccd_size_divisor = session.ccd_size_divisor; + dev->current_setup.stagger = session.num_staggered_lines; + dev->current_setup.max_shift = session.max_color_shift_lines + session.num_staggered_lines; + + dev->total_bytes_read = 0; + if (session.params.depth == 1) { + dev->total_bytes_to_read = ((session.params.pixels * session.params.lines) / 8 + + (((session.params.pixels * session.params.lines) % 8) ? 1 : 0)) * + session.params.channels; + } else { + dev->total_bytes_to_read = session.params.pixels * session.params.lines * + session.params.channels * (session.params.depth / 8); + } + + DBG(DBG_info, "%s: total bytes to send = %lu\n", __func__, (u_long) dev->total_bytes_to_read); + + DBG(DBG_proc, "%s: completed\n", __func__); + return SANE_STATUS_GOOD; +} + +static void +gl843_calculate_current_setup(Genesys_Device * dev, const Genesys_Sensor& sensor) +{ + int channels; + int depth; + int start; + + int used_res; + int used_pixels; + unsigned int lincnt; + int exposure; + int stagger; + + int max_shift; + + int optical_res; + + DBG(DBG_info, "%s ", __func__); + debug_dump(DBG_info, dev->settings); + + /* we have 2 domains for ccd: xres below or above half ccd max dpi */ + unsigned ccd_size_divisor = sensor.get_ccd_size_divisor_for_dpi(dev->settings.xres); + + /* channels */ + if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) + channels = 3; + else + channels = 1; + + /* depth */ + depth = dev->settings.depth; + if (dev->settings.scan_mode == ScanColorMode::LINEART) + depth = 1; + + /* start */ + if(dev->settings.scan_method==ScanMethod::TRANSPARENCY) + start = SANE_UNFIX (dev->model->x_offset_ta); + else + start = SANE_UNFIX (dev->model->x_offset); + + start /= ccd_size_divisor; + + start += dev->settings.tl_x; + start = (start * sensor.optical_res) / MM_PER_INCH; + + SetupParams params; + params.xres = dev->settings.xres; + params.yres = dev->settings.yres; + params.startx = start; // not used + params.starty = 0; // not used + params.pixels = dev->settings.pixels; + params.lines = dev->settings.lines; + params.depth = depth; + params.channels = channels; + params.scan_method = dev->settings.scan_method; + params.scan_mode = dev->settings.scan_mode; + params.color_filter = dev->settings.color_filter; + params.flags = 0; + + DBG(DBG_info, "%s ", __func__); + debug_dump(DBG_info, params); + + /* optical_res */ + optical_res = sensor.optical_res / ccd_size_divisor; + + /* stagger */ + if (ccd_size_divisor == 1 && (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE)) + stagger = (4 * params.yres) / dev->motor.base_ydpi; + else + stagger = 0; + DBG(DBG_info, "%s: stagger=%d lines\n", __func__, stagger); + + if (params.xres <= (unsigned) optical_res) { + used_res = params.xres; + } else { + used_res = optical_res; + } + + /* compute scan parameters values */ + /* pixels are allways given at half or full CCD optical resolution */ + /* use detected left margin and fixed value */ + + /* compute correct pixels number */ + used_pixels = (params.pixels * optical_res) / params.xres; + DBG(DBG_info, "%s: used_pixels=%d\n", __func__, used_pixels); + + /* exposure */ + exposure = sensor.exposure_lperiod; + if (exposure < 0) { + throw std::runtime_error("Exposure not defined in sensor definition"); + } + DBG(DBG_info, "%s : exposure=%d pixels\n", __func__, exposure); + + /* it seems base_dpi of the G4050 motor is changed above 600 dpi*/ + if (dev->model->motor_type == MOTOR_G4050 && params.yres>600) + { + dev->ld_shift_r = (dev->model->ld_shift_r*3800)/dev->motor.base_ydpi; + dev->ld_shift_g = (dev->model->ld_shift_g*3800)/dev->motor.base_ydpi; + dev->ld_shift_b = (dev->model->ld_shift_b*3800)/dev->motor.base_ydpi; + } + else + { + dev->ld_shift_r = dev->model->ld_shift_r; + dev->ld_shift_g = dev->model->ld_shift_g; + dev->ld_shift_b = dev->model->ld_shift_b; + } + + /* scanned area must be enlarged by max color shift needed */ + max_shift = sanei_genesys_compute_max_shift(dev, params.channels, params.yres, 0); + + /* lincnt */ + lincnt = params.lines + max_shift + stagger; + + dev->current_setup.params = params; + dev->current_setup.pixels = (used_pixels * used_res) / optical_res; + DBG(DBG_info, "%s: current_setup.pixels=%d\n", __func__, dev->current_setup.pixels); + dev->current_setup.lines = lincnt; + dev->current_setup.depth = params.depth; + dev->current_setup.channels = params.channels; + dev->current_setup.exposure_time = exposure; + dev->current_setup.xres = used_res; + dev->current_setup.yres = params.yres; + dev->current_setup.ccd_size_divisor = ccd_size_divisor; + dev->current_setup.stagger = stagger; + dev->current_setup.max_shift = max_shift + stagger; + + DBG(DBG_proc, "%s: completed\n", __func__); +} + +/** + * for fast power saving methods only, like disabling certain amplifiers + * @param dev device to use + * @param enable true to set inot powersaving + * */ +static SANE_Status +gl843_save_power (Genesys_Device * dev, SANE_Bool enable) +{ + uint8_t val; + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_proc, "%s: enable = %d\n", __func__, enable); + if (dev == NULL) + return SANE_STATUS_INVAL; + + /* switch KV-SS080 lamp off */ + if (dev->model->gpo_type == GPO_KVSS080) + { + RIE(sanei_genesys_read_register (dev, REG6C, &val)); + if(enable) + val &= 0xef; + else + val |= 0x10; + RIE(sanei_genesys_write_register(dev,REG6C,val)); + } + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +static SANE_Status +gl843_set_powersaving (Genesys_Device * dev, int delay /* in minutes */ ) +{ + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_proc, "%s (delay = %d)\n", __func__, delay); + if (dev == NULL) + return SANE_STATUS_INVAL; + + DBGCOMPLETED; + return status; +} + +static SANE_Status +gl843_start_action (Genesys_Device * dev) +{ + return sanei_genesys_write_register (dev, 0x0f, 0x01); +} + +static SANE_Status +gl843_stop_action_no_move(Genesys_Device* dev, Genesys_Register_Set* reg) +{ + uint8_t val = sanei_genesys_read_reg_from_set(reg, REG01); + val &= ~REG01_SCAN; + sanei_genesys_set_reg_from_set(reg, REG01, val); + SANE_Status ret = sanei_genesys_write_register(dev, REG01, val); + sanei_genesys_sleep_ms(100); + return ret; +} + +static SANE_Status +gl843_stop_action (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val40, val; + unsigned int loop; + + DBG(DBG_proc, "%s\n", __func__); + + status = sanei_genesys_get_status (dev, &val); + if (DBG_LEVEL >= DBG_io) + { + sanei_genesys_print_status (val); + } + + val40 = 0; + status = sanei_genesys_read_register (dev, REG40, &val40); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); + DBG(DBG_proc, "%s: completed\n", __func__); + return status; + } + + /* only stop action if needed */ + if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG)) + { + DBG(DBG_info, "%s: already stopped\n", __func__); + DBG(DBG_proc, "%s: completed\n", __func__); + return SANE_STATUS_GOOD; + } + + /* ends scan 646 */ + val = dev->reg.get8(REG01); + val &= ~REG01_SCAN; + dev->reg.set8(REG01, val); + status = sanei_genesys_write_register (dev, REG01, val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to write register 01: %s\n", __func__, sane_strstatus(status)); + return status; + } + sanei_genesys_sleep_ms(100); + + loop = 10; + while (loop > 0) + { + status = sanei_genesys_get_status (dev, &val); + if (DBG_LEVEL >= DBG_io) + { + sanei_genesys_print_status (val); + } + val40 = 0; + status = sanei_genesys_read_register (dev, 0x40, &val40); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); + DBGCOMPLETED; + return status; + } + + /* if scanner is in command mode, we are done */ + if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG) + && !(val & REG41_MOTORENB)) + { + DBGCOMPLETED; + return SANE_STATUS_GOOD; + } + + sanei_genesys_sleep_ms(100); + loop--; + } + + DBGCOMPLETED; + return SANE_STATUS_IO_ERROR; +} + +static SANE_Status +gl843_get_paper_sensor (Genesys_Device * dev, SANE_Bool * paper_loaded) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + + status = sanei_genesys_read_register (dev, REG6D, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read gpio: %s\n", __func__, sane_strstatus(status)); + return status; + } + *paper_loaded = (val & 0x1) == 0; + return SANE_STATUS_GOOD; + + return SANE_STATUS_INVAL; +} + +static SANE_Status +gl843_eject_document (Genesys_Device * dev) +{ + DBG(DBG_proc, "%s: not implemented \n", __func__); + if (dev == NULL) + return SANE_STATUS_INVAL; + return SANE_STATUS_GOOD; +} + + +static SANE_Status +gl843_load_document (Genesys_Device * dev) +{ + DBG(DBG_proc, "%s: not implemented \n", __func__); + if (dev == NULL) + return SANE_STATUS_INVAL; + return SANE_STATUS_GOOD; +} + +/** + * detects end of document and adjust current scan + * to take it into account + * used by sheetfed scanners + */ +static SANE_Status +gl843_detect_document_end (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + SANE_Bool paper_loaded; + unsigned int scancnt = 0; + int flines, channels, depth, bytes_remain, sublines, + bytes_to_flush, lines, sub_bytes, tmp, read_bytes_left; + DBG(DBG_proc, "%s: begin\n", __func__); + + RIE (gl843_get_paper_sensor (dev, &paper_loaded)); + + /* sheetfed scanner uses home sensor as paper present */ + if ((dev->document == SANE_TRUE) && !paper_loaded) + { + DBG(DBG_info, "%s: no more document\n", __func__); + dev->document = SANE_FALSE; + + channels = dev->current_setup.channels; + depth = dev->current_setup.depth; + read_bytes_left = (int) dev->read_bytes_left; + DBG(DBG_io, "%s: read_bytes_left=%d\n", __func__, read_bytes_left); + + /* get lines read */ + try { + status = sanei_genesys_read_scancnt(dev, &scancnt); + } catch (...) { + flines = 0; + } + if (status != SANE_STATUS_GOOD) + { + flines = 0; + } + else + { + /* compute number of line read */ + tmp = (int) dev->total_bytes_read; + if (depth == 1 || dev->settings.scan_mode == ScanColorMode::LINEART) + flines = tmp * 8 / dev->settings.pixels / channels; + else + flines = tmp / (depth / 8) / dev->settings.pixels / channels; + + /* number of scanned lines, but no read yet */ + flines = scancnt - flines; + + DBG(DBG_io, "%s: %d scanned but not read lines\n", __func__, flines); + } + + /* adjust number of bytes to read + * we need to read the final bytes which are word per line * number of last lines + * to have doc leaving feeder */ + lines = + (SANE_UNFIX (dev->model->post_scan) * dev->current_setup.yres) / + MM_PER_INCH + flines; + DBG(DBG_io, "%s: adding %d line to flush\n", __func__, lines); + + /* number of bytes to read from scanner to get document out of it after + * end of document dectected by hardware sensor */ + bytes_to_flush = lines * dev->wpl; + + /* if we are already close to end of scan, flushing isn't needed */ + if (bytes_to_flush < read_bytes_left) + { + /* we take all these step to work around an overflow on some plateforms */ + tmp = (int) dev->total_bytes_read; + DBG (DBG_io, "%s: tmp=%d\n", __func__, tmp); + bytes_remain = (int) dev->total_bytes_to_read; + DBG(DBG_io, "%s: bytes_remain=%d\n", __func__, bytes_remain); + bytes_remain = bytes_remain - tmp; + DBG(DBG_io, "%s: bytes_remain=%d\n", __func__, bytes_remain); + + /* remaining lines to read by frontend for the current scan */ + if (depth == 1 || dev->settings.scan_mode == ScanColorMode::LINEART) + { + flines = bytes_remain * 8 / dev->settings.pixels / channels; + } + else + flines = bytes_remain / (depth / 8) + / dev->settings.pixels / channels; + DBG(DBG_io, "%s: flines=%d\n", __func__, flines); + + if (flines > lines) + { + /* change the value controlling communication with the frontend : + * total bytes to read is current value plus the number of remaining lines + * multiplied by bytes per line */ + sublines = flines - lines; + + if (depth == 1 || dev->settings.scan_mode == ScanColorMode::LINEART) + sub_bytes = + ((dev->settings.pixels * sublines) / 8 + + (((dev->settings.pixels * sublines) % 8) ? 1 : 0)) * + channels; + else + sub_bytes = + dev->settings.pixels * sublines * channels * (depth / 8); + + dev->total_bytes_to_read -= sub_bytes; + + /* then adjust the physical bytes to read */ + if (read_bytes_left > sub_bytes) + { + dev->read_bytes_left -= sub_bytes; + } + else + { + dev->total_bytes_to_read = dev->total_bytes_read; + dev->read_bytes_left = 0; + } + + DBG(DBG_io, "%s: sublines=%d\n", __func__, sublines); + DBG(DBG_io, "%s: subbytes=%d\n", __func__, sub_bytes); + DBG(DBG_io, "%s: total_bytes_to_read=%lu\n", __func__, + (unsigned long) dev->total_bytes_to_read); + DBG(DBG_io, "%s: read_bytes_left=%d\n", __func__, read_bytes_left); + } + } + else + { + DBG(DBG_io, "%s: no flushing needed\n", __func__); + } + } + + DBG(DBG_proc, "%s: finished\n", __func__); + return SANE_STATUS_GOOD; +} + +// enables or disables XPA slider motor +static SANE_Status gl843_set_xpa_motor_power(Genesys_Device *dev, bool set) +{ + uint8_t val; + SANE_Status status=SANE_STATUS_GOOD; + + DBGSTART; + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) { + + if (set) { + RIE(sanei_genesys_read_register(dev, REG6C, &val)); + val &= ~REG6C_GPIO14; + if (dev->current_setup.xres >= 2400) { + val |= REG6C_GPIO10; + } + RIE(sanei_genesys_write_register(dev, REG6C, val)); + + RIE(sanei_genesys_read_register(dev, REGA6, &val)); + val |= REGA6_GPIO17; + RIE(sanei_genesys_write_register(dev, REGA6,val)); + } else { + RIE(sanei_genesys_read_register(dev, REG6C, &val)); + val |= REG6C_GPIO14; + val &= ~REG6C_GPIO10; + RIE(sanei_genesys_write_register(dev, REG6C, val)); + + RIE(sanei_genesys_read_register(dev, REGA6, &val)); + val &= ~REGA6_GPIO17; + RIE(sanei_genesys_write_register(dev, REGA6,val)); + } + DBGCOMPLETED; + return status; + } + + if (dev->model->model_id == MODEL_HP_SCANJET_G4050) { + + if (set) { + /* set MULTFILM et GPOADF */ + RIE (sanei_genesys_read_register (dev, REG6B, &val)); + val |=REG6B_MULTFILM|REG6B_GPOADF; + RIE (sanei_genesys_write_register (dev, REG6B, val)); + + RIE (sanei_genesys_read_register (dev, REG6C, &val)); + val &= ~REG6C_GPIO15; + RIE (sanei_genesys_write_register (dev, REG6C, val)); + + /* Motor power ? No move at all without this one */ + RIE (sanei_genesys_read_register (dev, REGA6, &val)); + val |= REGA6_GPIO20; + RIE (sanei_genesys_write_register(dev,REGA6,val)); + + RIE (sanei_genesys_read_register (dev, REGA8, &val)); + val &= ~REGA8_GPO27; + RIE (sanei_genesys_write_register (dev, REGA8, val)); + + RIE (sanei_genesys_read_register (dev, REGA9, &val)); + val |= REGA9_GPO32|REGA9_GPO31; + RIE (sanei_genesys_write_register (dev, REGA9, val)); + } else { + /* unset GPOADF */ + RIE (sanei_genesys_read_register (dev, REG6B, &val)); + val &= ~REG6B_GPOADF; + RIE (sanei_genesys_write_register (dev, REG6B, val)); + + RIE (sanei_genesys_read_register (dev, REGA8, &val)); + val |= REGA8_GPO27; + RIE (sanei_genesys_write_register (dev, REGA8, val)); + + RIE (sanei_genesys_read_register (dev, REGA9, &val)); + val &= ~REGA9_GPO31; + RIE (sanei_genesys_write_register (dev, REGA9, val)); + } + DBGCOMPLETED; + return status; + } + + DBGCOMPLETED; + return status; +} + + +/** @brief light XPA lamp + * toggle gpios to switch off regular lamp and light on the + * XPA light + * @param dev device to set up + */ +static SANE_Status gl843_set_xpa_lamp_power(Genesys_Device *dev, bool set) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val = 0; + DBGSTART; + + if (set) { + RIE(sanei_genesys_read_register(dev, REGA6, &val)); + + // cut regular lamp power + val &= ~(REGA6_GPIO24 | REGA6_GPIO23); + + // set XPA lamp power + val |= REGA6_GPIO22 | REGA6_GPIO21 | REGA6_GPIO19; + + RIE(sanei_genesys_write_register(dev, REGA6, val)); + + RIE(sanei_genesys_read_register(dev, REGA7, &val)); + val|=REGA7_GPOE24; /* lamp 1 off GPOE 24 */ + val|=REGA7_GPOE23; /* lamp 2 off GPOE 23 */ + val|=REGA7_GPOE22; /* full XPA lamp power */ + RIE(sanei_genesys_write_register(dev, REGA7, val)); + } else { + RIE(sanei_genesys_read_register(dev, REGA6, &val)); + + // switch on regular lamp + val |= REGA6_GPIO23; + + // no XPA lamp power (2 bits for level: __11 ____) + val &= ~(REGA6_GPIO22 | REGA6_GPIO21); + + RIE(sanei_genesys_write_register(dev, REGA6, val)); + } + + DBGCOMPLETED; + return status; +} + +/* Send the low-level scan command */ +static SANE_Status +gl843_begin_scan (Genesys_Device * dev, const Genesys_Sensor& sensor, Genesys_Register_Set * reg, + SANE_Bool start_motor) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + uint16_t dpiset, dpihw; + + DBGSTART; + + /* get back the target dpihw */ + sanei_genesys_get_double (reg, REG_DPISET, &dpiset); + dpihw = sanei_genesys_compute_dpihw(dev, sensor, dpiset); + + /* set up GPIO for scan */ + switch(dev->model->gpo_type) + { + /* KV case */ + case GPO_KVSS080: + RIE (sanei_genesys_write_register (dev, REGA9, 0x00)); + RIE (sanei_genesys_write_register (dev, REGA6, 0xf6)); + /* blinking led */ + RIE (sanei_genesys_write_register (dev, 0x7e, 0x04)); + break; + case GPO_G4050: + RIE (sanei_genesys_write_register (dev, REGA7, 0xfe)); + RIE (sanei_genesys_write_register (dev, REGA8, 0x3e)); + RIE (sanei_genesys_write_register (dev, REGA9, 0x06)); + switch (dpihw) + { + case 1200: + case 2400: + case 4800: + RIE (sanei_genesys_write_register (dev, REG6C, 0x60)); + RIE (sanei_genesys_write_register (dev, REGA6, 0x46)); + break; + default: /* 600 dpi case */ + RIE (sanei_genesys_write_register (dev, REG6C, 0x20)); + RIE (sanei_genesys_write_register (dev, REGA6, 0x44)); + } + + if (reg->state.is_xpa_on && reg->state.is_lamp_on) { + RIE(gl843_set_xpa_lamp_power(dev, true)); + } + + if (reg->state.is_xpa_on) { + dev->needs_home_ta = SANE_TRUE; + RIE(gl843_set_xpa_motor_power(dev, true)); + } + + /* blinking led */ + RIE (sanei_genesys_write_register (dev, REG7E, 0x01)); + break; + case GPO_CS8600F: + if (reg->state.is_xpa_on) { + dev->needs_home_ta = SANE_TRUE; + RIE(gl843_set_xpa_motor_power(dev, true)); + } + break; + case GPO_CS4400F: + case GPO_CS8400F: + default: + break; + } + + /* clear scan and feed count */ + RIE (sanei_genesys_write_register + (dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT)); + + /* enable scan and motor */ + RIE (sanei_genesys_read_register (dev, REG01, &val)); + val |= REG01_SCAN; + RIE (sanei_genesys_write_register (dev, REG01, val)); + + if (start_motor) + { + RIE (sanei_genesys_write_register (dev, REG0F, 1)); + } + else + { + RIE (sanei_genesys_write_register (dev, REG0F, 0)); + } + + DBGCOMPLETED; + return status; +} + + +/* Send the stop scan command */ +static SANE_Status +gl843_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg, + SANE_Bool check_stop) +{ + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_proc, "%s (check_stop = %d)\n", __func__, check_stop); + if (reg == NULL) + return SANE_STATUS_INVAL; + + /* post scan gpio */ + RIE(sanei_genesys_write_register(dev,0x7e,0x00)); + + // turn off XPA lamp if needed + // BUG: the if condition below probably shouldn't be enabled when XPA is off + if (reg->state.is_xpa_on || reg->state.is_lamp_on) { + gl843_set_xpa_lamp_power(dev, false); + } + + if (dev->model->is_sheetfed == SANE_TRUE) + { + status = SANE_STATUS_GOOD; + } + else /* flat bed scanners */ + { + status = gl843_stop_action (dev); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to stop: %s\n", __func__, sane_strstatus(status)); + return status; + } + } + + DBGCOMPLETED; + return status; +} + +/** @brief park XPA lamp + * park the XPA lamp if needed + */ +static SANE_Status gl843_park_xpa_lamp (Genesys_Device * dev) +{ + Genesys_Register_Set local_reg; + SANE_Status status = SANE_STATUS_GOOD; + GenesysRegister *r; + uint8_t val; + int loop = 0; + + DBGSTART; + + /* copy scan settings */ + local_reg = dev->reg; + + /* set a huge feedl and reverse direction */ + sanei_genesys_set_triple(&local_reg,REG_FEEDL,0xbdcd); + + /* clear scan and feed count */ + RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT)); + + /* set up for reverse and no scan */ + r = sanei_genesys_get_address (&local_reg, REG02); + r->value |= REG02_MTRREV; + r = sanei_genesys_get_address (&local_reg, REG01); + r->value &= ~REG01_SCAN; + + /* write to scanner and start action */ + RIE (dev->model->cmd_set->bulk_write_register(dev, local_reg)); + RIE(gl843_set_xpa_motor_power(dev, true)); + try { + status = gl843_start_action (dev); + } catch (...) { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + try { + gl843_stop_action(dev); + } catch (...) {} + try { + // restore original registers + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + } catch (...) {} + throw; + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + gl843_stop_action (dev); + /* restore original registers */ + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + return status; + } + + while (loop < 600) /* do not wait longer then 60 seconds */ + { + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, + sane_strstatus(status)); + return status; + } + if (DBG_LEVEL >= DBG_io2) + { + sanei_genesys_print_status (val); + } + + if (val & REG41_HOMESNR) /* home sensor */ + { + DBG(DBG_info, "%s: reached home position\n", __func__); + DBG(DBG_proc, "%s: finished\n", __func__); + + gl843_set_xpa_motor_power(dev, false); + dev->needs_home_ta = SANE_FALSE; + + return SANE_STATUS_GOOD; + } + sanei_genesys_sleep_ms(100); + ++loop; + } + + /* we are not parked here.... should we fail ? */ + DBG(DBG_info, "%s: XPA lamp is not parked\n", __func__); + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** @brief Moves the slider to the home (top) position slowly + * */ +static SANE_Status +gl843_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home) +{ + Genesys_Register_Set local_reg; + SANE_Status status = SANE_STATUS_GOOD; + GenesysRegister *r; + uint8_t val; + float resolution; + int loop = 0; + + DBG(DBG_proc, "%s (wait_until_home = %d)\n", __func__, wait_until_home); + + if (dev->needs_home_ta) { + RIE(gl843_park_xpa_lamp(dev)); + } + + /* regular slow back home */ + dev->scanhead_position_in_steps = 0; + + /* first read gives HOME_SENSOR true */ + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); + return status; + } + sanei_genesys_sleep_ms(100); + + /* second is reliable */ + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); + return status; + } + if (DBG_LEVEL >= DBG_io) + { + sanei_genesys_print_status (val); + } + if (val & HOMESNR) /* is sensor at home? */ + { + DBGCOMPLETED; + return SANE_STATUS_GOOD; + } + + local_reg = dev->reg; + resolution=sanei_genesys_get_lowest_ydpi(dev); + + const auto& sensor = sanei_genesys_find_sensor(dev, resolution); + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = 100; + session.params.starty = 40000; + session.params.pixels = 100; + session.params.lines = 100; + session.params.depth = 8; + session.params.channels = 1; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::LINEART; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + gl843_compute_session(dev, session, sensor); + + status = gl843_init_scan_regs(dev, sensor, &local_reg, session); + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set up registers: %s\n", __func__, sane_strstatus(status)); + DBGCOMPLETED; + return status; + } + + /* clear scan and feed count */ + RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT | REG0D_CLRMCNT)); + + /* set up for reverse and no scan */ + r = sanei_genesys_get_address(&local_reg, REG02); + r->value |= REG02_MTRREV; + r = sanei_genesys_get_address(&local_reg, REG01); + r->value &= ~REG01_SCAN; + + RIE (dev->model->cmd_set->bulk_write_register(dev, local_reg)); + + try { + status = gl843_start_action (dev); + } catch (...) { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + try { + gl843_stop_action(dev); + } catch (...) {} + try { + // restore original registers + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + } catch (...) {} + throw; + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + gl843_stop_action (dev); + /* restore original registers */ + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + return status; + } + + if (wait_until_home) + { + + while (loop < 300) /* do not wait longer then 30 seconds */ + { + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, + sane_strstatus(status)); + return status; + } + if (DBG_LEVEL >= DBG_io2) + { + sanei_genesys_print_status (val); + } + + if (val & REG41_HOMESNR) /* home sensor */ + { + DBG(DBG_info, "%s: reached home position\n", __func__); + DBG(DBG_proc, "%s: finished\n", __func__); + return SANE_STATUS_GOOD; + } + sanei_genesys_sleep_ms(100); + ++loop; + } + + /* when we come here then the scanner needed too much time for this, so we better stop the motor */ + gl843_stop_action (dev); + DBG(DBG_error, "%s: timeout while waiting for scanhead to go home\n", __func__); + return SANE_STATUS_IO_ERROR; + } + + DBG(DBG_info, "%s: scanhead is still moving\n", __func__); + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/* Automatically set top-left edge of the scan area by scanning a 200x200 pixels + area at 600 dpi from very top of scanner */ +static SANE_Status +gl843_search_start_position (Genesys_Device * dev) +{ + int size; + SANE_Status status = SANE_STATUS_GOOD; + Genesys_Register_Set local_reg; + int steps; + + int pixels = 600; + int dpi = 300; + + DBG(DBG_proc, "%s\n", __func__); + + local_reg = dev->reg; + + /* sets for a 200 lines * 600 pixels */ + /* normal scan with no shading */ + + // FIXME: the current approach of doing search only for one resolution does not work on scanners + // whith employ different sensors with potentially different settings. + auto& sensor = sanei_genesys_find_sensor_for_write(dev, dpi); + + ScanSession session; + session.params.xres = dpi; + session.params.yres = dpi; + session.params.startx = 0; + session.params.starty = 0; // we should give a small offset here - ~60 steps + session.params.pixels = 600; + session.params.lines = dev->model->search_lines; + session.params.depth = 8; + session.params.channels = 1; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::GRAY; + session.params.color_filter = ColorFilter::GREEN; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_IGNORE_LINE_DISTANCE | + SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE; + gl843_compute_session(dev, session, sensor); + + status = gl843_init_scan_regs(dev, sensor, &local_reg, session); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk setup registers: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* send to scanner */ + status = dev->model->cmd_set->bulk_write_register(dev, local_reg); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); + return status; + } + + size = dev->read_bytes_left; + + std::vector data(size); + + status = gl843_begin_scan(dev, sensor, &local_reg, SANE_TRUE); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* waits for valid data */ + do + sanei_genesys_test_buffer_empty (dev, &steps); + while (steps); + + /* now we're on target, we can read data */ + status = sanei_genesys_read_data_from_scanner(dev, data.data(), size); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read data: %s\n", __func__, sane_strstatus(status)); + return status; + } + RIE(gl843_stop_action_no_move(dev, &local_reg)); + + if (DBG_LEVEL >= DBG_data) + sanei_genesys_write_pnm_file("gl843_search_position.pnm", data.data(), 8, 1, pixels, + dev->model->search_lines); + + status = gl843_end_scan(dev, &local_reg, SANE_TRUE); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to end scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* update regs to copy ASIC internal state */ + dev->reg = local_reg; + + status = + sanei_genesys_search_reference_point (dev, sensor, data.data(), 0, dpi, pixels, + dev->model->search_lines); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set search reference point: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + return SANE_STATUS_GOOD; +} + +/* + * sets up register for coarse gain calibration + * todo: check it for scanners using it */ +static SANE_Status +gl843_init_regs_for_coarse_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set& regs) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t channels; + uint8_t cksel; + + DBGSTART; + cksel = (regs.find_reg(0x18).value & REG18_CKSEL) + 1; /* clock speed = 1..4 clocks */ + + /* set line size */ + if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) + channels = 3; + else + channels = 1; + + int flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_SINGLE_LINE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) { + flags |= SCAN_FLAG_USE_XPA; + } + + ScanSession session; + session.params.xres = dev->settings.xres; + session.params.yres = dev->settings.yres; + session.params.startx = 0; + session.params.starty = 0; + session.params.pixels = sensor.optical_res / cksel; // XXX STEF XXX dpi instead of pixels! + session.params.lines = 20; + session.params.depth = 16; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = dev->settings.scan_mode; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = flags; + gl843_compute_session(dev, session, sensor); + + status = gl843_init_scan_regs(dev, sensor, ®s, session); + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + sanei_genesys_set_motor_power(regs, false); + + DBG(DBG_info, "%s: optical sensor res: %d dpi, actual res: %d\n", __func__, + sensor.optical_res / cksel, dev->settings.xres); + + status = dev->model->cmd_set->bulk_write_register(dev, regs); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** @brief moves the slider to steps at motor base dpi + * @param dev device to work on + * @param steps number of steps to move + * */ +static SANE_Status +gl843_feed (Genesys_Device * dev, unsigned int steps) +{ + Genesys_Register_Set local_reg; + SANE_Status status = SANE_STATUS_GOOD; + GenesysRegister *r; + float resolution; + uint8_t val; + + DBGSTART; + + /* prepare local registers */ + local_reg = dev->reg; + + resolution=sanei_genesys_get_lowest_ydpi(dev); + + const auto& sensor = sanei_genesys_find_sensor(dev, resolution); + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = 0; + session.params.starty = steps; + session.params.pixels = 100; + session.params.lines = 3; + session.params.depth = 8; + session.params.channels = 3; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; + session.params.color_filter = ColorFilter::RED; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_FEEDING | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + gl843_compute_session(dev, session, sensor); + + status = gl843_init_scan_regs(dev, sensor, &local_reg, session); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set up registers: %s\n", __func__, sane_strstatus(status)); + DBGCOMPLETED; + return status; + } + + /* clear scan and feed count */ + RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRLNCNT)); + RIE (sanei_genesys_write_register (dev, REG0D, REG0D_CLRMCNT)); + + /* set up for no scan */ + r = sanei_genesys_get_address(&local_reg, REG01); + r->value &= ~REG01_SCAN; + + /* send registers */ + RIE (dev->model->cmd_set->bulk_write_register(dev, local_reg)); + + try { + status = gl843_start_action (dev); + } catch (...) { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + try { + gl843_stop_action(dev); + } catch (...) {} + try { + // restore original registers + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + } catch (...) {} + throw; + } + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); + gl843_stop_action (dev); + + /* restore original registers */ + dev->model->cmd_set->bulk_write_register(dev, dev->reg); + return status; + } + + /* wait until feed count reaches the required value, but do not + * exceed 30s */ + do + { + status = sanei_genesys_get_status (dev, &val); + } + while (status == SANE_STATUS_GOOD && !(val & FEEDFSH)); + + // looks like the scanner locks up if we scan immediately after feeding + sanei_genesys_sleep_ms(100); + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +static SANE_Status gl843_move_to_ta (Genesys_Device * dev); + +/* init registers for shading calibration */ +/* shading calibration is done at dpihw */ +static SANE_Status +gl843_init_regs_for_shading(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set& regs) +{ + SANE_Status status = SANE_STATUS_GOOD; + int move, resolution, dpihw, factor; + uint16_t strpixel; + + DBGSTART; + + /* initial calibration reg values */ + regs = dev->reg; + + dev->calib_channels = 3; + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) + dev->calib_lines = dev->model->shading_ta_lines; + else + dev->calib_lines = dev->model->shading_lines; + dpihw = sanei_genesys_compute_dpihw_calibration(dev, sensor, dev->settings.xres); + factor=sensor.optical_res/dpihw; + resolution=dpihw; + + const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, + dev->settings.scan_method); + + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY && + dev->model->model_id == MODEL_CANON_CANOSCAN_8600F && + dev->settings.xres == 4800) + { + float offset = SANE_UNFIX(dev->model->x_offset_ta); + offset /= calib_sensor.get_ccd_size_divisor_for_dpi(resolution); + offset = (offset * calib_sensor.optical_res) / MM_PER_INCH; + + unsigned size = SANE_UNFIX(dev->model->x_size_ta); + size /= calib_sensor.get_ccd_size_divisor_for_dpi(resolution); + size = (size * calib_sensor.optical_res) / MM_PER_INCH; + + dev->calib_pixels_offset = offset; + dev->calib_pixels = size; + } + else + { + dev->calib_pixels_offset = 0; + dev->calib_pixels = calib_sensor.sensor_pixels / factor; + } + + dev->calib_resolution = resolution; + + int flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) + { + // note: move_to_ta() function has already been called and the sensor is at the + // transparency adapter + move = 0; // already at dev->model->y_offset_calib_ta implicitly + flags |= SCAN_FLAG_USE_XPA; + } + else + move = SANE_UNFIX(dev->model->y_offset_calib); + + move = (move * resolution) / MM_PER_INCH; + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = dev->calib_pixels_offset; + session.params.starty = move; + session.params.pixels = dev->calib_pixels; + session.params.lines = dev->calib_lines; + session.params.depth = 16; + session.params.channels = dev->calib_channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = dev->settings.scan_mode; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = flags; + gl843_compute_session(dev, session, calib_sensor); + + status = gl843_init_scan_regs(dev, calib_sensor, ®s, session); + + // the pixel number may be updated to conform to scanner constraints + dev->calib_pixels = dev->current_setup.pixels; + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + dev->calib_total_bytes_to_read = dev->read_bytes_left; + + dev->scanhead_position_in_steps += dev->calib_lines + move; + sanei_genesys_get_double(®s,REG_STRPIXEL,&strpixel); + DBG(DBG_info, "%s: STRPIXEL=%d\n", __func__, strpixel); + + status = dev->model->cmd_set->bulk_write_register(dev, regs); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** @brief set up registers for the actual scan + */ +static SANE_Status +gl843_init_regs_for_scan (Genesys_Device * dev, const Genesys_Sensor& sensor) +{ + int channels; + int flags; + int depth; + float move; + int move_dpi; + float start; + + SANE_Status status = SANE_STATUS_GOOD; + + DBG(DBG_info, "%s ", __func__); + debug_dump(DBG_info, dev->settings); + + /* channels */ + if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) + channels = 3; + else + channels = 1; + + /* depth */ + depth = dev->settings.depth; + if (dev->settings.scan_mode == ScanColorMode::LINEART) + depth = 1; + + move_dpi = dev->motor.base_ydpi; + + flags = 0; + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) + { + // note: move_to_ta() function has already been called and the sensor is at the + // transparency adapter + move = SANE_UNFIX(dev->model->y_offset_ta) - SANE_UNFIX(dev->model->y_offset_calib_ta); + flags |= SCAN_FLAG_USE_XPA; + } + else + move = SANE_UNFIX(dev->model->y_offset); + + move += dev->settings.tl_y; + move = (move * move_dpi) / MM_PER_INCH; + DBG(DBG_info, "%s: move=%f steps\n", __func__, move); + + /* start */ + if(dev->settings.scan_method==ScanMethod::TRANSPARENCY) + start = SANE_UNFIX (dev->model->x_offset_ta); + else + start = SANE_UNFIX (dev->model->x_offset); + + start /= sensor.get_ccd_size_divisor_for_dpi(dev->settings.xres); + start += dev->settings.tl_x; + start = (start * sensor.optical_res) / MM_PER_INCH; + + /* enable emulated lineart from gray data */ + if(dev->settings.scan_mode == ScanColorMode::LINEART + && dev->settings.dynamic_lineart) + { + flags |= SCAN_FLAG_DYNAMIC_LINEART; + } + + ScanSession session; + session.params.xres = dev->settings.xres; + session.params.yres = dev->settings.yres; + session.params.startx = start; + session.params.starty = move; + session.params.pixels = dev->settings.pixels; + session.params.lines = dev->settings.lines; + session.params.depth = depth; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = dev->settings.scan_mode; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = flags; + gl843_compute_session(dev, session, sensor); + + status = gl843_init_scan_regs(dev, sensor, &dev->reg, session); + + if (status != SANE_STATUS_GOOD) + return status; + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** + * This function sends gamma tables to ASIC + */ +static SANE_Status +gl843_send_gamma_table(Genesys_Device* dev, const Genesys_Sensor& sensor) +{ + int size; + SANE_Status status = SANE_STATUS_GOOD; + int i; + + DBGSTART; + + size = 256; + + /* allocate temporary gamma tables: 16 bits words, 3 channels */ + std::vector gamma(size * 2 * 3); + + std::vector rgamma = get_gamma_table(dev, sensor, GENESYS_RED); + std::vector ggamma = get_gamma_table(dev, sensor, GENESYS_GREEN); + std::vector bgamma = get_gamma_table(dev, sensor, GENESYS_BLUE); + + // copy sensor specific's gamma tables + for (i = 0; i < size; i++) { + gamma[i * 2 + size * 0 + 0] = rgamma[i] & 0xff; + gamma[i * 2 + size * 0 + 1] = (rgamma[i] >> 8) & 0xff; + gamma[i * 2 + size * 2 + 0] = ggamma[i] & 0xff; + gamma[i * 2 + size * 2 + 1] = (ggamma[i] >> 8) & 0xff; + gamma[i * 2 + size * 4 + 0] = bgamma[i] & 0xff; + gamma[i * 2 + size * 4 + 1] = (bgamma[i] >> 8) & 0xff; + } + + /* send address */ + status = gl843_set_buffer_address (dev, 0x0000); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* send data */ + status = sanei_genesys_bulk_write_data(dev, 0x28, gamma.data(), size * 2 * 3); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to send gamma table: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBG(DBG_proc, "%s: completed\n", __func__); + return SANE_STATUS_GOOD; +} + +/* this function does the led calibration by scanning one line of the calibration + area below scanner's top on white strip. + +-needs working coarse/gain +*/ +static SANE_Status +gl843_led_calibration (Genesys_Device * dev, Genesys_Sensor& sensor, Genesys_Register_Set& regs) +{ + int num_pixels; + int total_size; + int used_res; + int i, j; + SANE_Status status = SANE_STATUS_GOOD; + int val; + int channels, depth; + int avg[3], avga, avge; + int turn; + uint16_t expr, expg, expb; + + SANE_Bool acceptable = SANE_FALSE; + + DBG(DBG_proc, "%s\n", __func__); + + /* offset calibration is always done in color mode */ + channels = 3; + depth = 16; + used_res = sensor.optical_res; + + auto& calib_sensor = sanei_genesys_find_sensor_for_write(dev, used_res, + dev->settings.scan_method); + num_pixels = + (calib_sensor.sensor_pixels * used_res) / calib_sensor.optical_res; + + /* initial calibration reg values */ + regs = dev->reg; + + ScanSession session; + session.params.xres = used_res; + session.params.yres = dev->motor.base_ydpi; + session.params.startx = 0; + session.params.starty = 0; + session.params.pixels = num_pixels; + session.params.lines = 1; + session.params.depth = depth; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_SINGLE_LINE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + gl843_compute_session(dev, session, calib_sensor); + + status = gl843_init_scan_regs(dev, calib_sensor, ®s, session); + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + + total_size = dev->read_bytes_left; + + std::vector line(total_size); + +/* + we try to get equal bright leds here: + + loop: + average per color + adjust exposure times + */ + + expr = calib_sensor.exposure.red; + expg = calib_sensor.exposure.green; + expb = calib_sensor.exposure.blue; + + turn = 0; + + do + { + + calib_sensor.exposure.red = expr; + calib_sensor.exposure.green = expg; + calib_sensor.exposure.blue = expb; + + sanei_genesys_set_exposure(regs, calib_sensor.exposure); + + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + + DBG(DBG_info, "%s: starting first line reading\n", __func__); + RIE (gl843_begin_scan(dev, calib_sensor, ®s, SANE_TRUE)); + RIE (sanei_genesys_read_data_from_scanner(dev, line.data(), total_size)); + RIE(gl843_stop_action_no_move(dev, ®s)); + + if (DBG_LEVEL >= DBG_data) + { + char fn[30]; + snprintf(fn, 30, "gl843_led_%02d.pnm", turn); + sanei_genesys_write_pnm_file(fn, line.data(), depth, channels, num_pixels, 1); + } + + acceptable = SANE_TRUE; + + for (j = 0; j < channels; j++) + { + avg[j] = 0; + for (i = 0; i < num_pixels; i++) + { + if (dev->model->is_cis) + val = + line[i * 2 + j * 2 * num_pixels + 1] * 256 + + line[i * 2 + j * 2 * num_pixels]; + else + val = + line[i * 2 * channels + 2 * j + 1] * 256 + + line[i * 2 * channels + 2 * j]; + avg[j] += val; + } + + avg[j] /= num_pixels; + } + + DBG(DBG_info, "%s: average: %d,%d,%d\n", __func__, avg[0], avg[1], avg[2]); + + acceptable = SANE_TRUE; + + if (avg[0] < avg[1] * 0.95 || avg[1] < avg[0] * 0.95 || + avg[0] < avg[2] * 0.95 || avg[2] < avg[0] * 0.95 || + avg[1] < avg[2] * 0.95 || avg[2] < avg[1] * 0.95) + acceptable = SANE_FALSE; + + if (!acceptable) + { + avga = (avg[0] + avg[1] + avg[2]) / 3; + expr = (expr * avga) / avg[0]; + expg = (expg * avga) / avg[1]; + expb = (expb * avga) / avg[2]; +/* + keep the resulting exposures below this value. + too long exposure drives the ccd into saturation. + we may fix this by relying on the fact that + we get a striped scan without shading, by means of + statistical calculation +*/ + avge = (expr + expg + expb) / 3; + + /* don't overflow max exposure */ + if (avge > 3000) + { + expr = (expr * 2000) / avge; + expg = (expg * 2000) / avge; + expb = (expb * 2000) / avge; + } + if (avge < 50) + { + expr = (expr * 50) / avge; + expg = (expg * 50) / avge; + expb = (expb * 50) / avge; + } + + } + + RIE (gl843_stop_action (dev)); + + turn++; + + } + while (!acceptable && turn < 100); + + DBG(DBG_info, "%s: acceptable exposure: %d,%d,%d\n", __func__, expr, expg, expb); + + sensor.exposure = calib_sensor.exposure; + + gl843_slow_back_home (dev, SANE_TRUE); + + DBG(DBG_proc, "%s: completed\n", __func__); + return status; +} + + + +/** + * average dark pixels of a 8 bits scan of a given channel + */ +static int +dark_average_channel (uint8_t * data, unsigned int pixels, unsigned int lines, + unsigned int channels, unsigned int black, int channel) +{ + unsigned int i, j, k, count; + unsigned int avg[3]; + uint8_t val; + + /* computes average values on black margin */ + for (k = 0; k < channels; k++) + { + avg[k] = 0; + count = 0; + // FIXME: start with the second line because the black pixels often have noise on the first + // line; the cause is probably incorrectly cleaned up previous scan + for (i = 1; i < lines; i++) + { + for (j = 0; j < black; j++) + { + val = data[i * channels * pixels + j*channels + k]; + avg[k] += val; + count++; + } + } + if (count) + avg[k] /= count; + DBG(DBG_info, "%s: avg[%d] = %d\n", __func__, k, avg[k]); + } + DBG(DBG_info, "%s: average = %d\n", __func__, avg[channel]); + return avg[channel]; +} + +/** @brief calibrate AFE offset + * Iterate doing scans at target dpi until AFE offset if correct. One + * color line is scanned at a time. Scanning head doesn't move. + * @param dev device to calibrate + */ +static SANE_Status +gl843_offset_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set& regs) +{ + SANE_Status status = SANE_STATUS_GOOD; + unsigned int channels, bpp; + int pass, total_size, i, resolution, lines; + int topavg[3], bottomavg[3], avg[3]; + int top[3], bottom[3], black_pixels, pixels, factor, dpihw; + + DBGSTART; + + /* offset calibration is always done in color mode */ + channels = 3; + lines = 8; + bpp = 8; + + /* compute divider factor to compute final pixels number */ + dpihw = sanei_genesys_compute_dpihw_calibration(dev, sensor, dev->settings.xres); + factor = sensor.optical_res / dpihw; + resolution = dpihw; + + const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, + dev->settings.scan_method); + + int target_pixels = calib_sensor.sensor_pixels / factor; + int start_pixel = 0; + black_pixels = calib_sensor.black_pixels / factor; + + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY && + dev->model->model_id == MODEL_CANON_CANOSCAN_8600F && + dev->settings.xres == 4800) + { + start_pixel = SANE_UNFIX(dev->model->x_offset_ta); + start_pixel /= calib_sensor.get_ccd_size_divisor_for_dpi(resolution); + start_pixel = (start_pixel * calib_sensor.optical_res) / MM_PER_INCH; + + target_pixels = SANE_UNFIX(dev->model->x_size_ta); + target_pixels /= calib_sensor.get_ccd_size_divisor_for_dpi(resolution); + target_pixels = (target_pixels * calib_sensor.optical_res) / MM_PER_INCH; + } + + int flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_SINGLE_LINE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + + if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) + { + flags |= SCAN_FLAG_USE_XPA; + } + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = start_pixel; + session.params.starty = 0; + session.params.pixels = target_pixels; + session.params.lines = lines; + session.params.depth = bpp; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; + session.params.color_filter = ColorFilter::RED; + session.params.flags = flags; + gl843_compute_session(dev, session, calib_sensor); + pixels = session.output_pixels; + + DBG(DBG_io, "%s: dpihw =%d\n", __func__, dpihw); + DBG(DBG_io, "%s: factor =%d\n", __func__, factor); + DBG(DBG_io, "%s: resolution =%d\n", __func__, resolution); + DBG(DBG_io, "%s: pixels =%d\n", __func__, pixels); + DBG(DBG_io, "%s: black_pixels=%d\n", __func__, black_pixels); + status = gl843_init_scan_regs(dev, calib_sensor, ®s, session); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + sanei_genesys_set_motor_power(regs, false); + + /* allocate memory for scans */ + total_size = dev->read_bytes_left; + + std::vector first_line(total_size); + std::vector second_line(total_size); + + /* init gain and offset */ + for (i = 0; i < 3; i++) + { + bottom[i] = 10; + dev->frontend.set_offset(i, bottom[i]); + dev->frontend.set_gain(i, 0); + } + RIE(gl843_set_fe(dev, calib_sensor, AFE_SET)); + + /* scan with obttom AFE settings */ + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + DBG(DBG_info, "%s: starting first line reading\n", __func__); + RIE(gl843_begin_scan(dev, calib_sensor, ®s, SANE_TRUE)); + RIE(sanei_genesys_read_data_from_scanner(dev, first_line.data(), total_size)); + RIE(gl843_stop_action_no_move(dev, ®s)); + + if (DBG_LEVEL >= DBG_data) + { + char fn[40]; + snprintf(fn, 40, "gl843_bottom_offset_%03d_%03d_%03d.pnm", + bottom[0], bottom[1], bottom[2]); + sanei_genesys_write_pnm_file(fn, first_line.data(), bpp, channels, pixels, lines); + } + + for (i = 0; i < 3; i++) + { + bottomavg[i] = dark_average_channel(first_line.data(), pixels, lines, channels, black_pixels, i); + DBG(DBG_io2, "%s: bottom avg %d=%d\n", __func__, i, bottomavg[i]); + } + + /* now top value */ + for (i = 0; i < 3; i++) + { + top[i] = 255; + dev->frontend.set_offset(i, top[i]); + } + RIE(gl843_set_fe(dev, calib_sensor, AFE_SET)); + + /* scan with top AFE values */ + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + DBG(DBG_info, "%s: starting second line reading\n", __func__); + RIE(gl843_begin_scan(dev, calib_sensor, ®s, SANE_TRUE)); + RIE(sanei_genesys_read_data_from_scanner(dev, second_line.data(), total_size)); + RIE(gl843_stop_action_no_move(dev, ®s)); + + for (i = 0; i < 3; i++) + { + topavg[i] = dark_average_channel(second_line.data(), pixels, lines, channels, black_pixels, i); + DBG(DBG_io2, "%s: top avg %d=%d\n", __func__, i, topavg[i]); + } + + pass = 0; + + std::vector debug_image; + size_t debug_image_lines = 0; + std::string debug_image_info; + + /* loop until acceptable level */ + while ((pass < 32) + && ((top[0] - bottom[0] > 1) + || (top[1] - bottom[1] > 1) || (top[2] - bottom[2] > 1))) + { + pass++; + + /* settings for new scan */ + for (i = 0; i < 3; i++) + { + if (top[i] - bottom[i] > 1) + { + dev->frontend.set_offset(i, (top[i] + bottom[i]) / 2); + } + } + RIE(gl843_set_fe(dev, calib_sensor, AFE_SET)); + + /* scan with no move */ + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + DBG(DBG_info, "%s: starting second line reading\n", __func__); + RIE(gl843_begin_scan(dev, calib_sensor, ®s, SANE_TRUE)); + RIE(sanei_genesys_read_data_from_scanner(dev, second_line.data(), total_size)); + RIE(gl843_stop_action_no_move(dev, ®s)); + + if (DBG_LEVEL >= DBG_data) + { + char title[100]; + snprintf(title, 100, "lines: %d pixels_per_line: %d offsets[0..2]: %d %d %d\n", + lines, pixels, + dev->frontend.get_offset(0), + dev->frontend.get_offset(1), + dev->frontend.get_offset(2)); + debug_image_info += title; + std::copy(second_line.begin(), second_line.end(), std::back_inserter(debug_image)); + debug_image_lines += lines; + } + + for (i = 0; i < 3; i++) + { + avg[i] = dark_average_channel(second_line.data(), pixels, lines, channels, black_pixels, i); + DBG(DBG_info, "%s: avg[%d]=%d offset=%d\n", __func__, i, avg[i], + dev->frontend.get_offset(i)); + } + + /* compute new boundaries */ + for (i = 0; i < 3; i++) + { + if (topavg[i] >= avg[i]) + { + topavg[i] = avg[i]; + top[i] = dev->frontend.get_offset(i); + } + else + { + bottomavg[i] = avg[i]; + bottom[i] = dev->frontend.get_offset(i); + } + } + } + + if (DBG_LEVEL >= DBG_data) + { + sanei_genesys_write_file("gl843_offset_all_desc.txt", + (uint8_t*) debug_image_info.data(), debug_image_info.size()); + sanei_genesys_write_pnm_file("gl843_offset_all.pnm", + debug_image.data(), bpp, channels, pixels, debug_image_lines); + } + + DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__, + dev->frontend.get_offset(0), + dev->frontend.get_offset(1), + dev->frontend.get_offset(2)); + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + + +/* alternative coarse gain calibration + this on uses the settings from offset_calibration and + uses only one scanline + */ +/* + with offset and coarse calibration we only want to get our input range into + a reasonable shape. the fine calibration of the upper and lower bounds will + be done with shading. + */ +static SANE_Status +gl843_coarse_gain_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set& regs, int dpi) +{ + int pixels, factor, dpihw; + int total_size; + int i, j, channels; + SANE_Status status = SANE_STATUS_GOOD; + int max[3]; + float coeff; + int val, lines; + int resolution; + int bpp; + + DBG(DBG_proc, "%s: dpi = %d\n", __func__, dpi); + dpihw=sanei_genesys_compute_dpihw_calibration(dev, sensor, dpi); + factor=sensor.optical_res/dpihw; + + /* coarse gain calibration is always done in color mode */ + channels = 3; + + /* follow CKSEL */ + if (dev->model->ccd_type == CCD_KVSS080) + { + if(dev->settings.xressettings.scan_method == ScanMethod::TRANSPARENCY) + { + flags |= SCAN_FLAG_USE_XPA; + } + + const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, + dev->settings.scan_method); + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = 0; + session.params.starty = 0; + session.params.pixels = target_pixels; + session.params.lines = lines; + session.params.depth = bpp; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = flags; + gl843_compute_session(dev, session, calib_sensor); + pixels = session.output_pixels; + + try { + status = gl843_init_scan_regs(dev, calib_sensor, ®s, session); + } catch (...) { + try { + sanei_genesys_set_motor_power(regs, false); + } catch (...) {} + throw; + } + + sanei_genesys_set_motor_power(regs, false); + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + RIE(dev->model->cmd_set->bulk_write_register(dev, regs)); + + total_size = dev->read_bytes_left; + + std::vector line(total_size); + + RIE(gl843_set_fe(dev, calib_sensor, AFE_SET)); + RIE(gl843_begin_scan(dev, calib_sensor, ®s, SANE_TRUE)); + RIE(sanei_genesys_read_data_from_scanner (dev, line.data(), total_size)); + RIE(gl843_stop_action_no_move(dev, ®s)); + + if (DBG_LEVEL >= DBG_data) + sanei_genesys_write_pnm_file("gl843_gain.pnm", line.data(), bpp, channels, pixels, lines); + + /* average value on each channel */ + for (j = 0; j < channels; j++) + { + max[j] = 0; + // FIXME: start from the second line because the first line often has artifacts. Probably + // caused by unclean cleanup of previous scans + for (i = pixels/4 + pixels; i < (pixels*3/4) + pixels; i++) + { + if(bpp==16) + { + if (dev->model->is_cis) + val = + line[i * 2 + j * 2 * pixels + 1] * 256 + + line[i * 2 + j * 2 * pixels]; + else + val = + line[i * 2 * channels + 2 * j + 1] * 256 + + line[i * 2 * channels + 2 * j]; + } + else + { + if (dev->model->is_cis) + val = line[i + j * pixels]; + else + val = line[i * channels + j]; + } + + max[j] += val; + } + max[j] = max[j] / (pixels/2); + + /* the flow of data through the frontend ADC is as follows (see e.g. VM8192 datasheet) + input + -> apply offset (o = i + 260mV * (DAC[7:0]-127.5)/127.5) -> + -> apply gain (o = i * 208/(283-PGA[7:0]) + -> ADC + + Here we have some input data that was acquired with zero gain (PGA==0). + We want to compute gain such that the output would approach full ADC range (controlled by + gain_white_ref). + + We want to solve the following for {PGA}: + + {input} * 208 / (283 - 0) = {output} + {input} * 208 / (283 - {PGA}) = {target output} + + The solution is the following equation: + + {PGA} = 283 * (1 - {output} / {target output}) + */ + float gain = ((float) max[j] / (calib_sensor.gain_white_ref*coeff)); + int code = 283 * (1 - gain); + if (code > 255) + code = 255; + else if (code < 0) + code = 0; + dev->frontend.set_gain(j, code); + + DBG(DBG_proc, "%s: channel %d, max=%d, gain = %f, setting:%d\n", __func__, j, max[j], gain, + code); + } + + if (dev->model->is_cis) { + uint8_t gain0 = dev->frontend.get_gain(0); + if (gain0 > dev->frontend.get_gain(1)) { + gain0 = dev->frontend.get_gain(1); + } + if (gain0 > dev->frontend.get_gain(2)) { + gain0 = dev->frontend.get_gain(2); + } + dev->frontend.set_gain(0, gain0); + dev->frontend.set_gain(1, gain0); + dev->frontend.set_gain(2, gain0); + } + + if (channels == 1) { + dev->frontend.set_gain(0, dev->frontend.get_gain(1)); + dev->frontend.set_gain(2, dev->frontend.get_gain(1)); + } + + RIE (gl843_stop_action (dev)); + + status=gl843_slow_back_home (dev, SANE_TRUE); + + DBGCOMPLETED; + return status; +} + +/* + * wait for lamp warmup by scanning the same line until difference + * between 2 scans is below a threshold + */ +static SANE_Status +gl843_init_regs_for_warmup (Genesys_Device * dev, + const Genesys_Sensor& sensor, + Genesys_Register_Set * reg, + int *channels, int *total_size) +{ + int num_pixels; + SANE_Status status = SANE_STATUS_GOOD; + int dpihw; + int resolution; + int factor; + + DBGSTART; + if (dev == NULL || reg == NULL || channels == NULL || total_size == NULL) + return SANE_STATUS_INVAL; + + /* setup scan */ + *channels=3; + resolution=600; + dpihw=sanei_genesys_compute_dpihw_calibration(dev, sensor, resolution); + resolution=dpihw; + + const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, + dev->settings.scan_method); + factor = calib_sensor.optical_res/dpihw; + num_pixels = calib_sensor.sensor_pixels/(factor*2); + *total_size = num_pixels * 3 * 1; + + *reg = dev->reg; + + ScanSession session; + session.params.xres = resolution; + session.params.yres = resolution; + session.params.startx = num_pixels/2; + session.params.starty = 0; + session.params.pixels = num_pixels; + session.params.lines = 1; + session.params.depth = 8; + session.params.channels = *channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; + session.params.color_filter = dev->settings.color_filter; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | + SCAN_FLAG_DISABLE_GAMMA | + SCAN_FLAG_SINGLE_LINE | + SCAN_FLAG_IGNORE_LINE_DISTANCE; + gl843_compute_session(dev, session, calib_sensor); + + status = gl843_init_scan_regs(dev, calib_sensor, reg, session); + + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + sanei_genesys_set_motor_power(*reg, false); + RIE(dev->model->cmd_set->bulk_write_register(dev, *reg)); + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** + * set up GPIO/GPOE for idle state +WRITE GPIO[17-21]= GPIO19 +WRITE GPOE[17-21]= GPOE21 GPOE20 GPOE19 GPOE18 +genesys_write_register(0xa8,0x3e) +GPIO(0xa8)=0x3e + */ +static SANE_Status +gl843_init_gpio (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + int idx; + + DBGSTART; + + RIE (sanei_genesys_write_register (dev, REG6E, dev->gpo.enable[0])); + RIE (sanei_genesys_write_register (dev, REG6F, dev->gpo.enable[1])); + RIE (sanei_genesys_write_register (dev, REG6C, dev->gpo.value[0])); + RIE (sanei_genesys_write_register (dev, REG6D, dev->gpo.value[1])); + + idx=0; + while(dev->model->gpo_type != gpios[idx].gpo_type && gpios[idx].gpo_type!=0) + { + idx++; + } + if (gpios[idx].gpo_type!=0) + { + RIE (sanei_genesys_write_register (dev, REGA6, gpios[idx].ra6)); + RIE (sanei_genesys_write_register (dev, REGA7, gpios[idx].ra7)); + RIE (sanei_genesys_write_register (dev, REGA8, gpios[idx].ra8)); + RIE (sanei_genesys_write_register (dev, REGA9, gpios[idx].ra9)); + } + else + { + status=SANE_STATUS_INVAL; + } + + DBGCOMPLETED; + return status; +} + + +/* * + * initialize ASIC from power on condition + */ +static SANE_Status +gl843_boot (Genesys_Device * dev, SANE_Bool cold) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + + DBGSTART; + + if(cold) + { + RIE (sanei_genesys_write_register (dev, 0x0e, 0x01)); + RIE (sanei_genesys_write_register (dev, 0x0e, 0x00)); + } + + if(dev->usb_mode == 1) + { + val = 0x14; + } + else + { + val = 0x11; + } + RIE (sanei_genesys_write_0x8c (dev, 0x0f, val)); + + /* test CHKVER */ + RIE (sanei_genesys_read_register (dev, REG40, &val)); + if (val & REG40_CHKVER) + { + RIE (sanei_genesys_read_register (dev, 0x00, &val)); + DBG(DBG_info, "%s: reported version for genesys chip is 0x%02x\n", __func__, val); + } + + /* Set default values for registers */ + gl843_init_registers (dev); + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + // turns on vref control for maximum current of the motor driver + RIE(sanei_genesys_write_register (dev, REG6B, 0x72)); + } + else + { + RIE(sanei_genesys_write_register (dev, REG6B, 0x02)); + } + + /* Write initial registers */ + RIE (dev->model->cmd_set->bulk_write_register(dev, dev->reg)); + + // Enable DRAM by setting a rising edge on bit 3 of reg 0x0b + val = dev->reg.find_reg(0x0b).value & REG0B_DRAMSEL; + val = (val | REG0B_ENBDRAM); + RIE (sanei_genesys_write_register (dev, REG0B, val)); + dev->reg.find_reg(0x0b).value = val; + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + RIE (sanei_genesys_write_0x8c (dev, 0x10, 0xc8)); + } + else + { + RIE (sanei_genesys_write_0x8c (dev, 0x10, 0xb4)); + } + + /* CLKSET */ + int clock_freq = REG0B_48MHZ; + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + clock_freq = REG0B_60MHZ; + + val = (dev->reg.find_reg(0x0b).value & ~REG0B_CLKSET) | clock_freq; + + RIE (sanei_genesys_write_register (dev, REG0B, val)); + dev->reg.find_reg(0x0b).value = val; + + /* prevent further writings by bulk write register */ + dev->reg.remove_reg(0x0b); + + if (dev->model->model_id != MODEL_CANON_CANOSCAN_8600F) + { + // set up end access + // FIXME: this is overwritten in gl843_init_gpio + sanei_genesys_write_register(dev, REGA7, 0x04); + sanei_genesys_write_register(dev, REGA9, 0x00); + } + + /* set RAM read address */ + RIE (sanei_genesys_write_register (dev, REG29, 0x00)); + RIE (sanei_genesys_write_register (dev, REG2A, 0x00)); + RIE (sanei_genesys_write_register (dev, REG2B, 0x00)); + + /* setup gpio */ + RIE (gl843_init_gpio (dev)); + + gl843_feed (dev, 300); + sanei_genesys_sleep_ms(100); + + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/* * + * initialize backend and ASIC : registers, motor tables, and gamma tables + * then ensure scanner's head is at home + */ +static SANE_Status +gl843_init (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + + DBG_INIT (); + DBGSTART; + + status=sanei_genesys_asic_init(dev, 0); + + DBGCOMPLETED; + return status; +} + +static SANE_Status +gl843_update_hardware_sensors (Genesys_Scanner * s) +{ + /* do what is needed to get a new set of events, but try to not lose + any of them. + */ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + + RIE (sanei_genesys_read_register (s->dev, REG6D, &val)); + + switch (s->dev->model->gpo_type) + { + case GPO_KVSS080: + s->buttons[BUTTON_SCAN_SW].write((val & 0x04) == 0); + break; + case GPO_G4050: + s->buttons[BUTTON_SCAN_SW].write((val & 0x01) == 0); + s->buttons[BUTTON_FILE_SW].write((val & 0x02) == 0); + s->buttons[BUTTON_EMAIL_SW].write((val & 0x04) == 0); + s->buttons[BUTTON_COPY_SW].write((val & 0x08) == 0); + break; + case GPO_CS4400F: + case GPO_CS8400F: + default: + break; + } + + return status; +} + +/** @brief move sensor to transparency adaptor + * Move sensor to the calibration of the transparency adapator (XPA). + * @param dev device to use + */ +static SANE_Status +gl843_move_to_ta (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + float resolution; + unsigned int feed; + + DBGSTART; + + resolution=sanei_genesys_get_lowest_ydpi(dev); + feed = 16*(SANE_UNFIX (dev->model->y_offset_calib_ta) * resolution) / MM_PER_INCH; + status = gl843_feed (dev, feed); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to move to XPA calibration area\n", __func__); + return status; + } + + DBGCOMPLETED; + return status; +} + + +/** @brief search for a full width black or white strip. + * This function searches for a black or white stripe across the scanning area. + * When searching backward, the searched area must completely be of the desired + * color since this area will be used for calibration which scans forward. + * @param dev scanner device + * @param forward SANE_TRUE if searching forward, SANE_FALSE if searching backward + * @param black SANE_TRUE if searching for a black strip, SANE_FALSE for a white strip + * @return SANE_STATUS_GOOD if a matching strip is found, SANE_STATUS_UNSUPPORTED if not + */ +static SANE_Status +gl843_search_strip (Genesys_Device * dev, const Genesys_Sensor& sensor, + SANE_Bool forward, SANE_Bool black) +{ + unsigned int pixels, lines, channels; + SANE_Status status = SANE_STATUS_GOOD; + Genesys_Register_Set local_reg; + size_t size; + int steps, depth, dpi; + unsigned int pass, count, found, x, y; + GenesysRegister *r; + + DBG(DBG_proc, "%s %s %s\n", __func__, black ? "black" : "white", forward ? "forward" : "reverse"); + + gl843_set_fe(dev, sensor, AFE_SET); + status = gl843_stop_action (dev); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to stop: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* set up for a gray scan at lowest dpi */ + dpi = sanei_genesys_get_lowest_dpi(dev); + channels = 1; + + const auto& calib_sensor = sanei_genesys_find_sensor(dev, dpi, dev->settings.scan_method); + + /* 10 MM */ + /* lines = (10 * dpi) / MM_PER_INCH; */ + /* shading calibation is done with dev->motor.base_ydpi */ + lines = (dev->model->shading_lines * dpi) / dev->motor.base_ydpi; + depth = 8; + pixels = (calib_sensor.sensor_pixels * dpi) / calib_sensor.optical_res; + + dev->scanhead_position_in_steps = 0; + + local_reg = dev->reg; + + ScanSession session; + session.params.xres = dpi; + session.params.yres = dpi; + session.params.startx = 0; + session.params.starty = 0; + session.params.pixels = pixels; + session.params.lines = lines; + session.params.depth = depth; + session.params.channels = channels; + session.params.scan_method = dev->settings.scan_method; + session.params.scan_mode = ScanColorMode::GRAY; + session.params.color_filter = ColorFilter::RED; + session.params.flags = SCAN_FLAG_DISABLE_SHADING | SCAN_FLAG_DISABLE_SHADING; + gl843_compute_session(dev, session, calib_sensor); + + status = gl843_init_scan_regs(dev, calib_sensor, &local_reg, session); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to setup for scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + size = dev->read_bytes_left; + std::vector data(size); + + /* set up for reverse or forward */ + r = sanei_genesys_get_address(&local_reg, REG02); + if (forward) + r->value &= ~REG02_MTRREV; + else + r->value |= REG02_MTRREV; + + + status = dev->model->cmd_set->bulk_write_register(dev, local_reg); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); + return status; + } + + status = gl843_begin_scan(dev, calib_sensor, &local_reg, SANE_TRUE); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* waits for valid data */ + do + sanei_genesys_test_buffer_empty (dev, &steps); + while (steps); + + /* now we're on target, we can read data */ + status = sanei_genesys_read_data_from_scanner(dev, data.data(), size); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read data: %s\n", __func__, sane_strstatus(status)); + return status; + } + + status = gl843_stop_action (dev); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: gl843_stop_action failed\n", __func__); + return status; + } + + pass = 0; + if (DBG_LEVEL >= DBG_data) + { + char fn[40]; + snprintf(fn, 40, "gl843_search_strip_%s_%s%02d.pnm", + black ? "black" : "white", forward ? "fwd" : "bwd", (int)pass); + sanei_genesys_write_pnm_file(fn, data.data(), depth, channels, pixels, lines); + } + + /* loop until strip is found or maximum pass number done */ + found = 0; + while (pass < 20 && !found) + { + status = + dev->model->cmd_set->bulk_write_register(dev, local_reg); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + /* now start scan */ + status = gl843_begin_scan(dev, calib_sensor, &local_reg, SANE_TRUE); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); + return status; + } + + /* waits for valid data */ + do + sanei_genesys_test_buffer_empty (dev, &steps); + while (steps); + + /* now we're on target, we can read data */ + status = sanei_genesys_read_data_from_scanner(dev, data.data(), size); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read data: %s\n", __func__, sane_strstatus(status)); + return status; + } + + status = gl843_stop_action (dev); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: gl843_stop_action failed\n", __func__); + return status; + } + + if (DBG_LEVEL >= DBG_data) + { + char fn[40]; + snprintf(fn, 40, "gl843_search_strip_%s_%s%02d.pnm", + black ? "black" : "white", forward ? "fwd" : "bwd", (int)pass); + sanei_genesys_write_pnm_file(fn, data.data(), depth, channels, pixels, lines); + } + + /* search data to find black strip */ + /* when searching forward, we only need one line of the searched color since we + * will scan forward. But when doing backward search, we need all the area of the + * same color */ + if (forward) + { + for (y = 0; y < lines && !found; y++) + { + count = 0; + /* count of white/black pixels depending on the color searched */ + for (x = 0; x < pixels; x++) + { + /* when searching for black, detect white pixels */ + if (black && data[y * pixels + x] > 90) + { + count++; + } + /* when searching for white, detect black pixels */ + if (!black && data[y * pixels + x] < 60) + { + count++; + } + } + + /* at end of line, if count >= 3%, line is not fully of the desired color + * so we must go to next line of the buffer */ + /* count*100/pixels < 3 */ + if ((count * 100) / pixels < 3) + { + found = 1; + DBG(DBG_data, "%s: strip found forward during pass %d at line %d\n", __func__, + pass, y); + } + else + { + DBG(DBG_data, "%s: pixels=%d, count=%d (%d%%)\n", __func__, pixels, count, + (100 * count) / pixels); + } + } + } + else /* since calibration scans are done forward, we need the whole area + to be of the required color when searching backward */ + { + count = 0; + for (y = 0; y < lines; y++) + { + /* count of white/black pixels depending on the color searched */ + for (x = 0; x < pixels; x++) + { + /* when searching for black, detect white pixels */ + if (black && data[y * pixels + x] > 90) + { + count++; + } + /* when searching for white, detect black pixels */ + if (!black && data[y * pixels + x] < 60) + { + count++; + } + } + } + + /* at end of area, if count >= 3%, area is not fully of the desired color + * so we must go to next buffer */ + if ((count * 100) / (pixels * lines) < 3) + { + found = 1; + DBG(DBG_data, "%s: strip found backward during pass %d \n", __func__, pass); + } + else + { + DBG(DBG_data, "%s: pixels=%d, count=%d (%d%%)\n", __func__, pixels, count, + (100 * count) / pixels); + } + } + pass++; + } + if (found) + { + status = SANE_STATUS_GOOD; + DBG(DBG_info, "%s: %s strip found\n", __func__, black ? "black" : "white"); + } + else + { + status = SANE_STATUS_UNSUPPORTED; + DBG(DBG_info, "%s: %s strip not found\n", __func__, black ? "black" : "white"); + } + + DBG(DBG_proc, "%s: completed\n", __func__); + return status; +} + +/** + * Send shading calibration data. The buffer is considered to always hold values + * for all the channels. + */ +static SANE_Status +gl843_send_shading_data (Genesys_Device * dev, const Genesys_Sensor& sensor, + uint8_t * data, int size) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint32_t final_size, length, i; + uint8_t *buffer; + int count,offset; + unsigned int cksel; + GenesysRegister *r; + uint16_t dpiset, strpixel, endpixel, startx, factor; + + DBGSTART; + + offset=0; + length=size; + r = sanei_genesys_get_address(&dev->reg, REG01); + if(r->value & REG01_SHDAREA) + { + /* recompute STRPIXEL used shading calibration so we can + * compute offset within data for SHDAREA case */ + r = sanei_genesys_get_address(&dev->reg, REG18); + cksel= (r->value & REG18_CKSEL)+1; + sanei_genesys_get_double(&dev->reg,REG_DPISET,&strpixel); + sanei_genesys_get_double(&dev->reg,REG_DPISET,&dpiset); + factor=sensor.optical_res/sanei_genesys_compute_dpihw(dev, sensor, dpiset); + + /* start coordinate in optical dpi coordinates */ + startx = (sensor.dummy_pixel / cksel) / factor; + + /* current scan coordinates */ + sanei_genesys_get_double(&dev->reg,REG_STRPIXEL,&strpixel); + sanei_genesys_get_double(&dev->reg,REG_ENDPIXEL,&endpixel); + + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + int optical_res = sensor.optical_res / dev->current_setup.ccd_size_divisor; + int dpiset_real = dpiset / dev->current_setup.ccd_size_divisor; + int half_ccd_factor = optical_res / + sanei_genesys_compute_dpihw_calibration(dev, sensor, dpiset_real); + strpixel /= half_ccd_factor; + endpixel /= half_ccd_factor; + } + + /* 16 bit words, 2 words per color, 3 color channels */ + offset=(strpixel-startx)*2*2*3; + length=(endpixel-strpixel)*2*2*3; + DBG(DBG_info, "%s: STRPIXEL=%d, ENDPIXEL=%d, startx=%d\n", __func__, strpixel, endpixel, + startx); + } + + /* compute and allocate size for final data */ + final_size = ((length+251) / 252) * 256; + DBG(DBG_io, "%s: final shading size=%04x (length=%d)\n", __func__, final_size, length); + std::vector final_data(final_size, 0); + + /* copy regular shading data to the expected layout */ + buffer = final_data.data(); + count = 0; + + /* loop over calibration data */ + for (i = 0; i < length; i++) + { + buffer[count] = data[offset+i]; + count++; + if ((count % (256*2)) == (252*2)) + { + count += 4*2; + } + } + + /* send data */ + status = sanei_genesys_set_buffer_address (dev, 0); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); + return status; + } + + status = dev->model->cmd_set->bulk_write_data (dev, 0x3c, final_data.data(), count); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to send shading table: %s\n", __func__, sane_strstatus(status)); + } + + DBGCOMPLETED; + return status; +} + + +/** the gl843 command set */ +static Genesys_Command_Set gl843_cmd_set = { + "gl843-generic", /* the name of this set */ + + [](Genesys_Device* dev) -> bool { (void) dev; return true; }, + + gl843_init, + gl843_init_regs_for_warmup, + gl843_init_regs_for_coarse_calibration, + gl843_init_regs_for_shading, + gl843_init_regs_for_scan, + + gl843_get_filter_bit, + gl843_get_lineart_bit, + gl843_get_bitset_bit, + gl843_get_gain4_bit, + gl843_get_fast_feed_bit, + gl843_test_buffer_empty_bit, + gl843_test_motor_flag_bit, + + gl843_set_fe, + gl843_set_powersaving, + gl843_save_power, + + gl843_begin_scan, + gl843_end_scan, + + gl843_send_gamma_table, + + gl843_search_start_position, + + gl843_offset_calibration, + gl843_coarse_gain_calibration, + gl843_led_calibration, + + NULL, + gl843_slow_back_home, + NULL, + + sanei_genesys_bulk_write_register, + sanei_genesys_bulk_write_data, + sanei_genesys_bulk_read_data, + + gl843_update_hardware_sensors, + + gl843_load_document, + gl843_detect_document_end, + gl843_eject_document, + gl843_search_strip, + + sanei_genesys_is_compatible_calibration, + gl843_move_to_ta, + gl843_send_shading_data, + gl843_calculate_current_setup, + gl843_boot +}; + +SANE_Status +sanei_gl843_init_cmd_set (Genesys_Device * dev) +{ + dev->model->cmd_set = &gl843_cmd_set; + return SANE_STATUS_GOOD; +} -- cgit v1.2.3