From 58912f68c2489bcee787599837447e0d64dfd61a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 24 May 2017 21:03:56 +0200 Subject: New upstream version 1.0.27 --- backend/genesys_gl847.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'backend/genesys_gl847.h') diff --git a/backend/genesys_gl847.h b/backend/genesys_gl847.h index 9901e23..1da2065 100644 --- a/backend/genesys_gl847.h +++ b/backend/genesys_gl847.h @@ -1,6 +1,6 @@ /* sane - Scanner Access Now Easy. - Copyright (C) 2010-2013 Stéphane Voltz + Copyright (C) 2010-2013 Stéphane Voltz This file is part of the SANE package. -- cgit v1.2.3 From 1687222e1b9e74c89cafbb5910e72d8ec7bfd40f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 31 Jul 2019 16:59:49 +0200 Subject: New upstream version 1.0.28 --- backend/genesys_gl847.h | 201 ++---------------------------------------------- 1 file changed, 8 insertions(+), 193 deletions(-) (limited to 'backend/genesys_gl847.h') diff --git a/backend/genesys_gl847.h b/backend/genesys_gl847.h index 1da2065..7af9c36 100644 --- a/backend/genesys_gl847.h +++ b/backend/genesys_gl847.h @@ -43,12 +43,6 @@ #include "genesys.h" - -#ifdef UNIT_TESTING -SANE_Status gl847_stop_action (Genesys_Device * dev); -SANE_Status gl847_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home); -#endif - #define REG01 0x01 #define REG01_CISSET 0x80 #define REG01_DOGENB 0x40 @@ -326,201 +320,29 @@ SANE_Status gl847_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_hom #define REG_CK3MAP 0x77 #define REG_CK4MAP 0x7a -/** - * writable scanner registers */ -enum -{ - reg_0x01 = 0, - reg_0x02, - reg_0x03, - reg_0x04, - reg_0x05, - reg_0x06, - reg_0x08, - reg_0x09, - reg_0x0a, - reg_0x0b, - reg_0x0c, - reg_0x0d, - reg_0x0e, - reg_0x0f, - reg_0x10, - reg_0x11, - reg_0x12, - reg_0x13, - reg_0x14, - reg_0x15, - reg_0x16, - reg_0x17, - reg_0x18, - reg_0x19, - reg_0x1a, - reg_0x1b, - reg_0x1c, - reg_0x1d, - reg_0x1e, - reg_0x1f, - reg_0x20, - reg_0x21, - reg_0x22, - reg_0x23, - reg_0x24, - reg_0x25, - reg_0x26, - reg_0x27, - reg_0x2c, - reg_0x2d, - reg_0x2e, - reg_0x2f, - reg_0x30, - reg_0x31, - reg_0x32, - reg_0x33, - reg_0x34, - reg_0x35, - reg_0x36, - reg_0x37, - reg_0x38, - reg_0x39, - reg_0x3a, - reg_0x3b, - reg_0x3d, - reg_0x3e, - reg_0x3f, - reg_0x51, - reg_0x52, - reg_0x53, - reg_0x54, - reg_0x55, - reg_0x56, - reg_0x57, - reg_0x58, - reg_0x59, - reg_0x5a, - reg_0x5e, - reg_0x5f, - reg_0x60, - reg_0x61, - reg_0x62, - reg_0x63, - reg_0x64, - reg_0x65, - reg_0x67, - reg_0x68, - reg_0x69, - reg_0x6a, - reg_0x6b, - reg_0x6c, - reg_0x6d, - reg_0x6e, - reg_0x6f, - reg_0x74, - reg_0x75, - reg_0x76, - reg_0x77, - reg_0x78, - reg_0x79, - reg_0x7a, - reg_0x7b, - reg_0x7c, - reg_0x7d, - reg_0x87, - reg_0x9d, - reg_0xa2, - reg_0xa3, - reg_0xa4, - reg_0xa5, - reg_0xa6, - reg_0xa7, - reg_0xa8, - reg_0xa9, - reg_0xbd, - reg_0xbe, - reg_0xc5, - reg_0xc6, - reg_0xc7, - reg_0xc8, - reg_0xc9, - reg_0xca, - reg_0xd0, - reg_0xd1, - reg_0xd2, - reg_0xe0, - reg_0xe1, - reg_0xe2, - reg_0xe3, - reg_0xe4, - reg_0xe5, - reg_0xe6, - reg_0xe7, - reg_0xe8, - reg_0xe9, - reg_0xea, - reg_0xeb, - reg_0xec, - reg_0xed, - reg_0xee, - reg_0xef, - reg_0xf0, - reg_0xf1, - reg_0xf2, - reg_0xf3, - reg_0xf4, - reg_0xf5, - reg_0xf6, - reg_0xf7, - reg_0xf8, - reg_0xfe, - GENESYS_GL847_MAX_REGS -}; - -#define SETREG(adr,val) {dev->reg[reg_##adr].address=adr;dev->reg[reg_##adr].value=val;} +#define SETREG(adr,val) { dev->reg.init_reg(adr, val); } /** set up registers for an actual scan * * this function sets up the scanner to scan in normal or single line mode */ -#ifndef UNIT_TESTING -static -#endif -SANE_Status gl847_init_scan_regs (Genesys_Device * dev, - Genesys_Register_Set * reg, - float xres, /*dpi */ - float yres, /*dpi */ - float startx, /*optical_res, from dummy_pixel+1 */ - float starty, /*base_ydpi, from home! */ - float pixels, - float lines, - unsigned int depth, - unsigned int channels, - int color_filter, - unsigned int flags); +static SANE_Status gl847_init_scan_regs(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set * reg, SetupParams& params); /* Send the low-level scan command */ -#ifndef UNIT_TESTING -static -#endif -SANE_Status gl847_begin_scan (Genesys_Device * dev, Genesys_Register_Set * reg, SANE_Bool start_motor); +static SANE_Status gl847_begin_scan (Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Register_Set * reg, SANE_Bool start_motor); /* Send the stop scan command */ -#ifndef UNIT_TESTING -static -#endif -SANE_Status gl847_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg, SANE_Bool check_stop); +static SANE_Status gl847_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg, SANE_Bool check_stop); -#ifndef UNIT_TESTING -static -#endif -SANE_Status gl847_init (Genesys_Device * dev); +static SANE_Status gl847_init (Genesys_Device * dev); /** @brief moves the slider to steps at motor base dpi * @param dev device to work on * @param steps number of steps to move * */ -#ifndef UNIT_TESTING -static -#endif -SANE_Status +static SANE_Status gl847_feed (Genesys_Device * dev, unsigned int steps); typedef struct @@ -606,8 +428,6 @@ typedef struct { uint8_t r17; /**> TG width */ } Sensor_Profile; -/* *INDENT-OFF* */ - static size_t order_01[]={0,1}; static size_t order_0213[]={0,2,1,3}; static size_t order_0246[]={0,2,4,6,1,3,5,7}; @@ -643,7 +463,6 @@ static Sensor_Profile sensors[]={ {CIS_CANONLIDE700, 2400, 10576, 135, 249, 85, 5187, 255, 2798, 1558, 972, new_order , 0x08}, {CIS_CANONLIDE700, 4800, 10576, 135, 249, 85, 5187, 255, 2798, 1558, 972, order_0145, 0x06}, }; -/* *INDENT-ON* */ /* base motor sopes in full step unit */ /* target=((exposure * dpi) / base_dpi)>>step_type; */ @@ -663,7 +482,6 @@ static uint32_t lide200_max[] = { 124992, 124992, 124992, 124992, 124992, 124992 * database of motor profiles */ -/* *INDENT-OFF* */ static Motor_Profile gl847_motors[]={ /* LiDE 100 */ {MOTOR_CANONLIDE100, 2848, HALF_STEP , lide200_base}, @@ -690,6 +508,3 @@ static Motor_Profile gl847_motors[]={ /* end of database entry */ {0, 0, 0, NULL}, }; -/* *INDENT-ON* */ - -/* vim: set sw=2 cino=>2se-1sn-1s{s^-1st0(0u0 smarttab expandtab: */ -- cgit v1.2.3 From ffa8801644a7d53cc1c785e3450f794c07a14eb0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 2 Feb 2020 17:13:01 +0100 Subject: New upstream version 1.0.29 --- backend/genesys_gl847.h | 510 ------------------------------------------------ 1 file changed, 510 deletions(-) delete mode 100644 backend/genesys_gl847.h (limited to 'backend/genesys_gl847.h') diff --git a/backend/genesys_gl847.h b/backend/genesys_gl847.h deleted file mode 100644 index 7af9c36..0000000 --- a/backend/genesys_gl847.h +++ /dev/null @@ -1,510 +0,0 @@ -/* sane - Scanner Access Now Easy. - - Copyright (C) 2010-2013 Stéphane Voltz - - This file is part of the SANE package. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, - MA 02111-1307, USA. - - As a special exception, the authors of SANE give permission for - additional uses of the libraries contained in this release of SANE. - - The exception is that, if you link a SANE library with other files - to produce an executable, this does not by itself cause the - resulting executable to be covered by the GNU General Public - License. Your use of that executable is in no way restricted on - account of linking the SANE library code into it. - - This exception does not, however, invalidate any other reasons why - the executable file might be covered by the GNU General Public - License. - - If you submit changes to SANE to the maintainers to be included in - a subsequent release, you agree by submitting the changes that - those changes may be distributed with this exception intact. - - If you write modifications of your own for SANE, it is your choice - whether to permit this exception to apply to your modifications. - If you do not wish that, delete this exception notice. -*/ - -#include "genesys.h" - -#define REG01 0x01 -#define REG01_CISSET 0x80 -#define REG01_DOGENB 0x40 -#define REG01_DVDSET 0x20 -#define REG01_STAGGER 0x10 -#define REG01_COMPENB 0x08 -#define REG01_TRUEGRAY 0x04 -#define REG01_SHDAREA 0x02 -#define REG01_SCAN 0x01 - -#define REG02 0x02 -#define REG02_NOTHOME 0x80 -#define REG02_ACDCDIS 0x40 -#define REG02_AGOHOME 0x20 -#define REG02_MTRPWR 0x10 -#define REG02_FASTFED 0x08 -#define REG02_MTRREV 0x04 -#define REG02_HOMENEG 0x02 -#define REG02_LONGCURV 0x01 - -#define REG03 0x03 -#define REG03_LAMPDOG 0x80 -#define REG03_AVEENB 0x40 -#define REG03_XPASEL 0x20 -#define REG03_LAMPPWR 0x10 -#define REG03_LAMPTIM 0x0f - -#define REG04 0x04 -#define REG04_LINEART 0x80 -#define REG04_BITSET 0x40 -#define REG04_AFEMOD 0x30 -#define REG04_FILTER 0x0c -#define REG04_FESET 0x03 - -#define REG04S_AFEMOD 4 - -#define REG05 0x05 -#define REG05_DPIHW 0xc0 -#define REG05_DPIHW_600 0x00 -#define REG05_DPIHW_1200 0x40 -#define REG05_DPIHW_2400 0x80 -#define REG05_DPIHW_4800 0xc0 -#define REG05_MTLLAMP 0x30 -#define REG05_GMMENB 0x08 -#define REG05_MTLBASE 0x03 - -#define REG06_SCANMOD 0xe0 -#define REG06S_SCANMOD 5 -#define REG06_PWRBIT 0x10 -#define REG06_GAIN4 0x08 -#define REG06_OPTEST 0x07 - -#define REG07_LAMPSIM 0x80 - -#define REG08_DRAM2X 0x80 -#define REG08_MPENB 0x20 -#define REG08_CIS_LINE 0x10 -#define REG08_IR1ENB 0x08 -#define REG08_IR2ENB 0x04 -#define REG08_ENB24M 0x01 - -#define REG09_MCNTSET 0xc0 -#define REG09_EVEN1ST 0x20 -#define REG09_BLINE1ST 0x10 -#define REG09_BACKSCAN 0x08 -#define REG09_ENHANCE 0x04 -#define REG09_SHORTTG 0x02 -#define REG09_NWAIT 0x01 - -#define REG09S_MCNTSET 6 -#define REG09S_CLKSET 4 - - -#define REG0A_LPWMEN 0x10 - -#define REG0B 0x0b -#define REG0B_DRAMSEL 0x07 -#define REG0B_ENBDRAM 0x08 -#define REG0B_ENBDRAM 0x08 -#define REG0B_RFHDIS 0x10 -#define REG0B_CLKSET 0xe0 -#define REG0B_24MHZ 0x00 -#define REG0B_30MHZ 0x20 -#define REG0B_40MHZ 0x40 -#define REG0B_48MHZ 0x60 -#define REG0B_60MHZ 0x80 - -#define REG0C 0x0c -#define REG0C_CCDLMT 0x0f - -#define REG0D 0x0d -#define REG0D_FULLSTP 0x10 -#define REG0D_SEND 0x80 -#define REG0D_CLRMCNT 0x04 -#define REG0D_CLRDOCJM 0x02 -#define REG0D_CLRLNCNT 0x01 - -#define REG0F 0x0f - -#define REG16_CTRLHI 0x80 -#define REG16_TOSHIBA 0x40 -#define REG16_TGINV 0x20 -#define REG16_CK1INV 0x10 -#define REG16_CK2INV 0x08 -#define REG16_CTRLINV 0x04 -#define REG16_CKDIS 0x02 -#define REG16_CTRLDIS 0x01 - -#define REG17_TGMODE 0xc0 -#define REG17_TGMODE_NO_DUMMY 0x00 -#define REG17_TGMODE_REF 0x40 -#define REG17_TGMODE_XPA 0x80 -#define REG17_TGW 0x3f -#define REG17S_TGW 0 - -#define REG18 0x18 -#define REG18_CNSET 0x80 -#define REG18_DCKSEL 0x60 -#define REG18_CKTOGGLE 0x10 -#define REG18_CKDELAY 0x0c -#define REG18_CKSEL 0x03 - -#define REG1A_SW2SET 0x80 -#define REG1A_SW1SET 0x40 -#define REG1A_MANUAL3 0x02 -#define REG1A_MANUAL1 0x01 -#define REG1A_CK4INV 0x08 -#define REG1A_CK3INV 0x04 -#define REG1A_LINECLP 0x02 - -#define REG1C 0x1c -#define REG1C_TGTIME 0x07 - -#define REG1D_CK4LOW 0x80 -#define REG1D_CK3LOW 0x40 -#define REG1D_CK1LOW 0x20 -#define REG1D_TGSHLD 0x1f -#define REG1DS_TGSHLD 0 - - -#define REG1E_WDTIME 0xf0 -#define REG1ES_WDTIME 4 -#define REG1E_LINESEL 0x0f -#define REG1ES_LINESEL 0 - -#define REG_FEDCNT 0x1f - -#define REG24 0x1c -#define REG40 0x40 -#define REG40_CHKVER 0x10 -#define REG40_HISPDFLG 0x04 -#define REG40_MOTMFLG 0x02 -#define REG40_DATAENB 0x01 - -#define REG41_PWRBIT 0x80 -#define REG41_BUFEMPTY 0x40 -#define REG41_FEEDFSH 0x20 -#define REG41_SCANFSH 0x10 -#define REG41_HOMESNR 0x08 -#define REG41_LAMPSTS 0x04 -#define REG41_FEBUSY 0x02 -#define REG41_MOTORENB 0x01 - -#define REG58_VSMP 0xf8 -#define REG58S_VSMP 3 -#define REG58_VSMPW 0x07 -#define REG58S_VSMPW 0 - -#define REG59_BSMP 0xf8 -#define REG59S_BSMP 3 -#define REG59_BSMPW 0x07 -#define REG59S_BSMPW 0 - -#define REG5A_ADCLKINV 0x80 -#define REG5A_RLCSEL 0x40 -#define REG5A_CDSREF 0x30 -#define REG5AS_CDSREF 4 -#define REG5A_RLC 0x0f -#define REG5AS_RLC 0 - -#define REG5E_DECSEL 0xe0 -#define REG5ES_DECSEL 5 -#define REG5E_STOPTIM 0x1f -#define REG5ES_STOPTIM 0 - -#define REG60 0x60 -#define REG60_Z1MOD 0x1f -#define REG61 0x61 -#define REG61_Z1MOD 0xff -#define REG62 0x62 -#define REG62_Z1MOD 0xff - -#define REG63 0x63 -#define REG63_Z2MOD 0x1f -#define REG64 0x64 -#define REG64_Z2MOD 0xff -#define REG65 0x65 -#define REG65_Z2MOD 0xff - -#define REG60S_STEPSEL 5 -#define REG60_STEPSEL 0xe0 -#define REG60_FULLSTEP 0x00 -#define REG60_HALFSTEP 0x20 -#define REG60_EIGHTHSTEP 0x60 -#define REG60_16THSTEP 0x80 - -#define REG63S_FSTPSEL 5 -#define REG63_FSTPSEL 0xe0 -#define REG63_FULLSTEP 0x00 -#define REG63_HALFSTEP 0x20 -#define REG63_EIGHTHSTEP 0x60 -#define REG63_16THSTEP 0x80 - -#define REG67 0x67 -#define REG67_MTRPWM 0x80 - -#define REG68 0x68 -#define REG68_FASTPWM 0x80 - -#define REG6B 0x6b -#define REG6B_MULTFILM 0x80 -#define REG6B_GPOM13 0x40 -#define REG6B_GPOM12 0x20 -#define REG6B_GPOM11 0x10 -#define REG6B_GPO18 0x02 -#define REG6B_GPO17 0x01 - -#define REG6C 0x6c -#define REG6C_GPIO16 0x80 -#define REG6C_GPIO15 0x40 -#define REG6C_GPIO14 0x20 -#define REG6C_GPIO13 0x10 -#define REG6C_GPIO12 0x08 -#define REG6C_GPIO11 0x04 -#define REG6C_GPIO10 0x02 -#define REG6C_GPIO9 0x01 -#define REG6C_GPIOH 0xff -#define REG6C_GPIOL 0xff - -#define REG6D 0x6d -#define REG6E 0x6e -#define REG6F 0x6f -#define REG7E 0x7e - -#define REG87_LEDADD 0x04 - -#define REG9E 0x9e -#define REG9F 0x9f - -#define REGA6 0xa6 -#define REGA7 0xa7 -#define REGA8 0xa8 -#define REGA9 0xa9 -#define REGAB 0xab - -#define REG_EXPR 0x10 -#define REG_EXPG 0x12 -#define REG_EXPB 0x14 -#define REG_EXPDMY 0x19 -#define REG_STEPNO 0x21 -#define REG_FWDSTEP 0x22 -#define REG_BWDSTEP 0x23 -#define REG_FASTNO 0x24 -#define REG_DPISET 0x2c -#define REG_STRPIXEL 0x30 -#define REG_ENDPIXEL 0x32 -#define REG_LINCNT 0x25 -#define REG_MAXWD 0x35 -#define REG_LPERIOD 0x38 -#define REG_FEEDL 0x3d -#define REG_FMOVDEC 0x5f -#define REG_FSHDEC 0x69 -#define REG_FMOVNO 0x6a -#define REG_CK1MAP 0x74 -#define REG_CK3MAP 0x77 -#define REG_CK4MAP 0x7a - -#define SETREG(adr,val) { dev->reg.init_reg(adr, val); } - -/** set up registers for an actual scan - * - * this function sets up the scanner to scan in normal or single line mode - */ -static SANE_Status gl847_init_scan_regs(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set * reg, SetupParams& params); - -/* Send the low-level scan command */ -static SANE_Status gl847_begin_scan (Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set * reg, SANE_Bool start_motor); - -/* Send the stop scan command */ -static SANE_Status gl847_end_scan (Genesys_Device * dev, Genesys_Register_Set * reg, SANE_Bool check_stop); - -static SANE_Status gl847_init (Genesys_Device * dev); - -/** @brief moves the slider to steps at motor base dpi - * @param dev device to work on - * @param steps number of steps to move - * */ -static SANE_Status -gl847_feed (Genesys_Device * dev, unsigned int steps); - -typedef struct -{ - uint8_t sensor_id; - uint8_t r6b; - uint8_t r6c; - uint8_t r6d; - uint8_t r6e; - uint8_t r6f; - uint8_t ra6; - uint8_t ra7; - uint8_t ra8; - uint8_t ra9; -} Gpio_Profile; - -static Gpio_Profile gpios[]={ - { GPO_CANONLIDE200, 0x02, 0xf9, 0x20, 0xff, 0x00, 0x04, 0x04, 0x00, 0x00}, - { GPO_CANONLIDE700, 0x06, 0xdb, 0xff, 0xff, 0x80, 0x15, 0x07, 0x20, 0x10}, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - -typedef struct -{ - uint8_t dramsel; - uint8_t rd0; - uint8_t rd1; - uint8_t rd2; - uint8_t re0; - uint8_t re1; - uint8_t re2; - uint8_t re3; - uint8_t re4; - uint8_t re5; - uint8_t re6; - uint8_t re7; -} Memory_layout; - -static Memory_layout layouts[]={ - /* LIDE 100 */ - { - 0x29, - 0x0a, 0x15, 0x20, - 0x00, 0xac, 0x02, 0x55, 0x02, 0x56, 0x03, 0xff - }, - /* LIDE 200 */ - { - 0x29, - 0x0a, 0x1f, 0x34, - 0x01, 0x24, 0x02, 0x91, 0x02, 0x92, 0x03, 0xff - }, - /* 5600F */ - { - 0x29, - 0x0a, 0x1f, 0x34, - 0x01, 0x24, 0x02, 0x91, 0x02, 0x92, 0x03, 0xff - }, - /* LIDE 700F */ - { - 0x2a, - 0x0a, 0x33, 0x5c, - 0x02, 0x14, 0x09, 0x09, 0x09, 0x0a, 0x0f, 0xff - } -}; - -/** @brief structure for sensor settings - * this structure describes the sensor settings to use for a given - * exposure. - */ -typedef struct { - int sensor_type; /**> sensor id */ - int dpi; /**> maximum dpi for which data are valid */ - int exposure; /**> exposure */ - int ck1map; /**> CK1MAP */ - int ck3map; /**> CK3MAP */ - int ck4map; /**> CK4MAP */ - int segcnt; /**> SEGCNT */ - int expdummy; /**> exposure dummy */ - int expr; /**> initial red exposure */ - int expg; /**> initial green exposure */ - int expb; /**> initial blue exposure */ - size_t *order; /**> order of sub-segments */ - uint8_t r17; /**> TG width */ -} Sensor_Profile; - -static size_t order_01[]={0,1}; -static size_t order_0213[]={0,2,1,3}; -static size_t order_0246[]={0,2,4,6,1,3,5,7}; - -static size_t new_order[]={0,1,2,3}; -static size_t order_0145[]={0,1,4,5,2,3,6,7}; - -/** - * database of sensor profiles - */ -static Sensor_Profile sensors[]={ - {CIS_CANONLIDE100, 200, 2848, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE100, 300, 1424, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE100, 600, 1432, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE100, 1200, 2712, 60, 159, 85, 5136, 255, 746, 478, 353, order_01 , 0x08}, - {CIS_CANONLIDE100, 2400, 5280, 60, 159, 85, 5136, 255, 1417, 909, 643, order_0213, 0x06}, - /* - {CIS_CANONLIDE200, 150, 2848, 240, 636, 340, 5144, 0, 255, 637, 637, 637}, - {CIS_CANONLIDE200, 300, 1424, 240, 636, 340, 5144, 0, 255, 637, 637, 637}, - */ - {CIS_CANONLIDE200, 200, 2848, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE200, 300, 1424, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE200, 600, 1432, 60, 159, 85, 5136, 255, 410, 275, 203, NULL , 0x0a}, - {CIS_CANONLIDE200, 1200, 2712, 60, 159, 85, 5136, 255, 746, 478, 353, order_01 , 0x08}, - {CIS_CANONLIDE200, 2400, 5280, 60, 159, 85, 5136, 255, 1417, 909, 643, order_0213, 0x06}, - {CIS_CANONLIDE200, 4800, 10416, 60, 159, 85, 5136, 255, 2692, 1728, 1221, order_0246, 0x04}, - - /* LiDE 700F */ - {CIS_CANONLIDE700, 150, 2848, 135, 249, 85, 5187, 255, 465, 310, 239, NULL , 0x0c}, - {CIS_CANONLIDE700, 300, 1424, 135, 249, 85, 5187, 255, 465, 310, 239, NULL , 0x0c}, - {CIS_CANONLIDE700, 600, 1504, 135, 249, 85, 5187, 255, 465, 310, 239, NULL , 0x0c}, - {CIS_CANONLIDE700, 1200, 2696, 135, 249, 85, 5187, 255, 1464, 844, 555, order_01 , 0x0a}, - {CIS_CANONLIDE700, 2400, 10576, 135, 249, 85, 5187, 255, 2798, 1558, 972, new_order , 0x08}, - {CIS_CANONLIDE700, 4800, 10576, 135, 249, 85, 5187, 255, 2798, 1558, 972, order_0145, 0x06}, -}; - -/* base motor sopes in full step unit */ -/* target=((exposure * dpi) / base_dpi)>>step_type; */ -static uint32_t lide200_base[] = { 46876, 2343, 2343, 2343, 2343, 2343, 2343, 2343, 2343, 2336, 2329, 2322, 2314, 2307, 2300,2292,2285,2278,2271,2263,2256,2249,2241,2234,2227,2219,2212,2205,2198,2190,2183,2176,2168,2161,2154,2146,2139,2132,2125,2117,2110,2103,2095,2088,2081,2073,2066,2059,2052,2044,2037,2030,2022,2015,2008,2001,1993,1986,1979,1971,1964,1957,1949,1942,1935,1928,1920,1913,1906,1898,1891,1884,1876,1869,1862,1855,1847,1840,1833,1825,1818,1811,1803,1796,1789,1782,1774,1767,1760,1752,1745,1738,1731,1723,1716,1709,1701,1694,1687,1679,1672,1665,1658,1650,1643,1636,1628,1621,1614,1606,1599,1592,1585,1577,1570,1563,1555,1548,1541,1533,1526,1519,1512,1504,1497,1490,1482,1475,1468,1461,1453,1446,1439,1431,1424,1417,1409,1402,1395,1388,1380,1373,1366,1358,1351,1344,1336,1329,1322,1315,1307,1300,1293,1285,1278,1271,1263,1256,1249,1242,1234,1227,1220,1212,1205,1198,1191,1183,1176,1169,1161,1154,1147,1139,1132,1125,1118,1110,1103,1096,1088,1081,1074,1066,1059,1052,1045,1037,1030,1023,1015,1008,1001,993,986,979,972,964,957,950,942,935,928,921,913,906,899,891,884,877,869,862,855,848,840,833,826,818,811,804,796,789,782,775,767,760,753,745,738,731,723,716,709,702,694,687,680,672,665,658,651,643,636,629,621,614,607,599,592,585,578,570,563,556,534,534, 0}; -static uint32_t lide200_medium[] = { 46876, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136, 8136,2343, 2336, 2329, 2322, 2314, 2307, 2300,2292,2285,2278,2271,2263,2256,2249,2241,2234,2227,2219,2212,2205,2198,2190,2183,2176,2168,2161,2154,2146,2139,2132,2125,2117,2110,2103,2095,2088,2081,2073,2066,2059,2052,2044,2037,2030,2022,2015,2008,2001,1993,1986,1979,1971,1964,1957,1949,1942,1935,1928,1920,1913,1906,1898,1891,1884,1876,1869,1862,1855,1847,1840,1833,1825,1818,1811,1803,1796,1789,1782,1774,1767,1760,1752,1745,1738,1731,1723,1716,1709,1701,1694,1687,1679,1672,1665,1658,1650,1643,1636,1628,1621,1614,1606,1599,1592,1585,1577,1570,1563,1555,1548,1541,1533,1526,1519,1512,1504,1497,1490,1482,1475,1468,1461,1453,1446,1439,1431,1424,1417,1409,1402,1395,1388,1380,1373,1366,1358,1351,1344,1336,1329,1322,1315,1307,1300,1293,1285,1278,1271,1263,1256,1249,1242,1234,1227,1220,1212,1205,1198,1191,1183,1176,1169,1161,1154,1147,1139,1132,1125,1118,1110,1103,1096,1088,1081,1074,1066,1059,1052,1045,1037,1030,1023,1015,1008,1001,993,986,979,972,964,957,950,942,935,928,921,913,906,899,891,884,877,869,862,855,848,840,833,826,818,811,804,796,789,782,775,767,760,753,745,738,731,723,716,709,702,694,687,680,672,665,658,651,643,636,629,621,614,607,599,592,585,578,570,563,556,534,534, 0}; -static uint32_t lide200_high[] = { 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 31680, 2219,2212,2205,2198,2190,2183,2176,2168,2161,2154,2146,2139,2132,2125,2117,2110,2103,2095,2088,2081,2073,2066,2059,2052,2044,2037,2030,2022,2015,2008,2001,1993,1986,1979,1971,1964,1957,1949,1942,1935,1928,1920,1913,1906,1898,1891,1884,1876,1869,1862,1855,1847,1840,1833,1825,1818,1811,1803,1796,1789,1782,1774,1767,1760,1752,1745,1738,1731,1723,1716,1709,1701,1694,1687,1679,1672,1665,1658,1650,1643,1636,1628,1621,1614,1606,1599,1592,1585,1577,1570,1563,1555,1548,1541,1533,1526,1519,1512,1504,1497,1490,1482,1475,1468,1461,1453,1446,1439,1431,1424,1417,1409,1402,1395,1388,1380,1373,1366,1358,1351,1344,1336,1329,1322,1315,1307,1300,1293,1285,1278,1271,1263,1256,1249,1242,1234,1227,1220,1212,1205,1198,1191,1183,1176,1169,1161,1154,1147,1139,1132,1125,1118,1110,1103,1096,1088,1081,1074,1066,1059,1052,1045,1037,1030,1023,1015,1008,1001,993,986,979,972,964,957,950,942,935,928,921,913,906,899,891,884,877,869,862,855,848,840,833,826,818,811,804,796,789,782,775,767,760,753,745,738,731,723,716,709,702,694,687,680,672,665,658,651,643,636,629,621,614,607,599,592,585,578,570,563,556,534,534, 0}; -static uint32_t lide700_medium[] = { 46876,2342,2342,2342,2342,2342,2342,2342,2342,2302,2286,2274,2266,2258,2252,2244,2240,2234,2228,2224,2218,2216,2210,2208,2202,2200,2194,2192,2190,2186,2182,2180,2176,2174,2172,2170,2166,2162,2160,2156,2154,2152,2150,2150,2146,2144,2142,2140,2136,2134,2132,2130,2130,2128,2124,2122,2120,2120,2118,2116,2112,2112,2110,2108,2106,2106,2104,2102,2102,2098,2096,2094,2094,2092,2090,2090,2086,2084,2084,2082,2082,2080,2078,2078,2076,2074,2074,2070,2070,2068,2066,2066,2064,2064,2062,2062,2060,2058,2058,2054,2054,2052,2052,2050,2050,2048,2048,2046,2046,2044,2042,2042,2040,2040,2038,2038,2034,2034,2032,2032,2030,2030,2028,2028,2026,2026,2022,2022}; -static uint32_t lide700_high[] = { 46876,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864,15864}; -/* 5190 trop - * 5186 pas assez - */ -/* -static uint32_t lide200_max[] = { 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 124992, 2219,2212,2205,2198,2190,2183,2176,2168,2161,2154,2146,2139,2132,2125,2117,2110,2103,2095,2088,2081,2073,2066,2059,2052,2044,2037,2030,2022,2015,2008,2001,1993,1986,1979,1971,1964,1957,1949,1942,1935,1928,1920,1913,1906,1898,1891,1884,1876,1869,1862,1855,1847,1840,1833,1825,1818,1811,1803,1796,1789,1782,1774,1767,1760,1752,1745,1738,1731,1723,1716,1709,1701,1694,1687,1679,1672,1665,1658,1650,1643,1636,1628,1621,1614,1606,1599,1592,1585,1577,1570,1563,1555,1548,1541,1533,1526,1519,1512,1504,1497,1490,1482,1475,1468,1461,1453,1446,1439,1431,1424,1417,1409,1402,1395,1388,1380,1373,1366,1358,1351,1344,1336,1329,1322,1315,1307,1300,1293,1285,1278,1271,1263,1256,1249,1242,1234,1227,1220,1212,1205,1198,1191,1183,1176,1169,1161,1154,1147,1139,1132,1125,1118,1110,1103,1096,1088,1081,1074,1066,1059,1052,1045,1037,1030,1023,1015,1008,1001,993,986,979,972,964,957,950,942,935,928,921,913,906,899,891,884,877,869,862,855,848,840,833,826,818,811,804,796,789,782,775,767,760,753,745,738,731,723,716,709,702,694,687,680,672,665,658,651,643,636,629,621,614,607,599,592,585,578,570,563,556,534,534, 0}; -*/ - -/** - * database of motor profiles - */ - -static Motor_Profile gl847_motors[]={ - /* LiDE 100 */ - {MOTOR_CANONLIDE100, 2848, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE100, 1424, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE100, 1432, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE100, 2712, QUARTER_STEP, lide200_medium}, - {MOTOR_CANONLIDE100, 5280, EIGHTH_STEP , lide200_high}, - - /* LiDE 200 */ - {MOTOR_CANONLIDE200, 2848, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE200, 1424, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE200, 1432, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE200, 2712, QUARTER_STEP, lide200_medium}, - {MOTOR_CANONLIDE200, 5280, EIGHTH_STEP , lide200_high}, - {MOTOR_CANONLIDE200, 10416, EIGHTH_STEP , lide200_high}, - - /* LiDE 700F */ - {MOTOR_CANONLIDE700, 2848, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE700, 1424, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE700, 1504, HALF_STEP , lide200_base}, - {MOTOR_CANONLIDE700, 2696, HALF_STEP , lide700_medium}, /* 2696 , 2838 */ - {MOTOR_CANONLIDE700, 10576, EIGHTH_STEP, lide700_high}, - - /* end of database entry */ - {0, 0, 0, NULL}, -}; -- cgit v1.2.3