From 1687222e1b9e74c89cafbb5910e72d8ec7bfd40f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 31 Jul 2019 16:59:49 +0200 Subject: New upstream version 1.0.28 --- backend/genesys_low.cc | 2059 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2059 insertions(+) create mode 100644 backend/genesys_low.cc (limited to 'backend/genesys_low.cc') diff --git a/backend/genesys_low.cc b/backend/genesys_low.cc new file mode 100644 index 0000000..097375f --- /dev/null +++ b/backend/genesys_low.cc @@ -0,0 +1,2059 @@ +/* sane - Scanner Access Now Easy. + + Copyright (C) 2010-2013 Stéphane Voltz + + + This file is part of the SANE package. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + As a special exception, the authors of SANE give permission for + additional uses of the libraries contained in this release of SANE. + + The exception is that, if you link a SANE library with other files + to produce an executable, this does not by itself cause the + resulting executable to be covered by the GNU General Public + License. Your use of that executable is in no way restricted on + account of linking the SANE library code into it. + + This exception does not, however, invalidate any other reasons why + the executable file might be covered by the GNU General Public + License. + + If you submit changes to SANE to the maintainers to be included in + a subsequent release, you agree by submitting the changes that + those changes may be distributed with this exception intact. + + If you write modifications of your own for SANE, it is your choice + whether to permit this exception to apply to your modifications. + If you do not wish that, delete this exception notice. +*/ + +#define DEBUG_DECLARE_ONLY + +#include "genesys_low.h" +#include "assert.h" + +#include + + +Genesys_Device::~Genesys_Device() +{ + clear(); + + if (file_name != nullptr) + free(file_name); +} + +void Genesys_Device::clear() +{ + read_buffer.clear(); + lines_buffer.clear(); + shrink_buffer.clear(); + out_buffer.clear(); + binarize_buffer.clear(); + local_buffer.clear(); + + calib_file.clear(); + + calibration_cache.clear(); + + white_average_data.clear(); + dark_average_data.clear(); +} + +/* ------------------------------------------------------------------------ */ +/* functions calling ASIC specific functions */ +/* ------------------------------------------------------------------------ */ + +/** + * setup the hardware dependent functions + */ +SANE_Status +sanei_genesys_init_cmd_set (Genesys_Device * dev) +{ + DBG_INIT (); + switch (dev->model->asic_type) + { + case GENESYS_GL646: + return sanei_gl646_init_cmd_set (dev); + case GENESYS_GL841: + return sanei_gl841_init_cmd_set (dev); + case GENESYS_GL843: + return sanei_gl843_init_cmd_set (dev); + case GENESYS_GL845: /* since only a few reg bits differs + we handle both together */ + case GENESYS_GL846: + return sanei_gl846_init_cmd_set (dev); + case GENESYS_GL847: + return sanei_gl847_init_cmd_set (dev); + case GENESYS_GL124: + return sanei_gl124_init_cmd_set (dev); + default: + return SANE_STATUS_INVAL; + } +} + +/* ------------------------------------------------------------------------ */ +/* General IO and debugging functions */ +/* ------------------------------------------------------------------------ */ + +SANE_Status sanei_genesys_write_file(const char *filename, uint8_t * data, size_t length) +{ + FILE *out; + + out = fopen (filename, "w"); + if (!out) { + DBG(DBG_error, "%s: could nor open %s for writing: %s\n", __func__, filename, + strerror(errno)); + return SANE_STATUS_INVAL; + } + fwrite(data, 1, length, out); + fclose(out); + + DBG(DBG_proc, "%s: finished\n", __func__); + return SANE_STATUS_GOOD; +} + +/* Write data to a pnm file (e.g. calibration). For debugging only */ +/* data is RGB or grey, with little endian byte order */ +SANE_Status +sanei_genesys_write_pnm_file (const char *filename, uint8_t * data, int depth, + int channels, int pixels_per_line, int lines) +{ + FILE *out; + int count; + + DBG(DBG_info, "%s: depth=%d, channels=%d, ppl=%d, lines=%d\n", __func__,depth, channels, + pixels_per_line, lines); + + out = fopen (filename, "w"); + if (!out) + { + DBG(DBG_error, "%s: could nor open %s for writing: %s\n", __func__, filename, + strerror(errno)); + return SANE_STATUS_INVAL; + } + if(depth==1) + { + fprintf (out, "P4\n%d\n%d\n", pixels_per_line, lines); + } + else + { + fprintf (out, "P%c\n%d\n%d\n%d\n", channels == 1 ? '5' : '6', + pixels_per_line, lines, (int) pow (2, depth) - 1); + } + if (channels == 3) + { + for (count = 0; count < (pixels_per_line * lines * 3); count++) + { + if (depth == 16) + fputc (*(data + 1), out); + fputc (*(data++), out); + if (depth == 16) + data++; + } + } + else + { + if (depth==1) + { + pixels_per_line/=8; + } + for (count = 0; count < (pixels_per_line * lines); count++) + { + switch (depth) + { + case 8: + fputc (*(data + count), out); + break; + case 16: + fputc (*(data + 1), out); + fputc (*(data), out); + data += 2; + break; + default: + fputc(data[count], out); + break; + } + } + } + fclose (out); + + DBG(DBG_proc, "%s: finished\n", __func__); + return SANE_STATUS_GOOD; +} + +/* ------------------------------------------------------------------------ */ +/* Read and write RAM, registers and AFE */ +/* ------------------------------------------------------------------------ */ + +extern unsigned sanei_genesys_get_bulk_max_size(Genesys_Device * dev) +{ + /* Genesys supports 0xFE00 maximum size in general, wheraus GL646 supports + 0xFFC0. We use 0xF000 because that's the packet limit in the Linux usbmon + USB capture stack. By default it limits packet size to b_size / 5 where + b_size is the size of the ring buffer. By default it's 300*1024, so the + packet is limited 61440 without any visibility to acquiring software. + */ + if (dev->model->asic_type == GENESYS_GL124 || + dev->model->asic_type == GENESYS_GL846 || + dev->model->asic_type == GENESYS_GL847) { + return 0xeff0; + } + return 0xf000; +} + +void sanei_genesys_bulk_read_data_send_header(Genesys_Device* dev, size_t len) +{ + DBG_HELPER(dbg); + + uint8_t outdata[8]; + if (dev->model->asic_type == GENESYS_GL124 || + dev->model->asic_type == GENESYS_GL846 || + dev->model->asic_type == GENESYS_GL847) + { + // hard coded 0x10000000 address + outdata[0] = 0; + outdata[1] = 0; + outdata[2] = 0; + outdata[3] = 0x10; + } else if (dev->model->asic_type == GENESYS_GL841 || + dev->model->asic_type == GENESYS_GL843) { + outdata[0] = BULK_IN; + outdata[1] = BULK_RAM; + outdata[2] = VALUE_BUFFER & 0xff; + outdata[3] = (VALUE_BUFFER >> 8) & 0xff; + } else { + outdata[0] = BULK_IN; + outdata[1] = BULK_RAM; + outdata[2] = 0x00; + outdata[3] = 0x00; + } + + /* data size to transfer */ + outdata[4] = (len & 0xff); + outdata[5] = ((len >> 8) & 0xff); + outdata[6] = ((len >> 16) & 0xff); + outdata[7] = ((len >> 24) & 0xff); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_BUFFER, 0x00, + sizeof(outdata), outdata); +} + +SANE_Status sanei_genesys_bulk_read_data(Genesys_Device * dev, uint8_t addr, uint8_t* data, + size_t len) +{ + DBG_HELPER(dbg); + + // currently supported: GL646, GL841, GL843, GL846, GL847, GL124 + size_t size, target; + uint8_t *buffer; + + unsigned is_addr_used = 1; + unsigned has_header_before_each_chunk = 0; + if (dev->model->asic_type == GENESYS_GL124 || + dev->model->asic_type == GENESYS_GL846 || + dev->model->asic_type == GENESYS_GL847) + { + is_addr_used = 0; + has_header_before_each_chunk = 1; + } + + if (is_addr_used) { + DBG(DBG_io, "%s: requesting %lu bytes from 0x%02x addr\n", __func__, (u_long) len, addr); + } else { + DBG(DBG_io, "%s: requesting %lu bytes\n", __func__, (u_long) len); + } + + if (len == 0) + return SANE_STATUS_GOOD; + + if (is_addr_used) { + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_SET_REGISTER, 0x00, + 1, &addr); + } + + target = len; + buffer = data; + + size_t max_in_size = sanei_genesys_get_bulk_max_size(dev); + + if (!has_header_before_each_chunk) { + sanei_genesys_bulk_read_data_send_header(dev, len); + } + + // loop until computed data size is read + while (target) { + if (target > max_in_size) { + size = max_in_size; + } else { + size = target; + } + + if (has_header_before_each_chunk) { + sanei_genesys_bulk_read_data_send_header(dev, size); + } + + DBG(DBG_io2, "%s: trying to read %lu bytes of data\n", __func__, (u_long) size); + + dev->usb_dev.bulk_read(data, &size); + + DBG(DBG_io2, "%s: read %lu bytes, %lu remaining\n", __func__, + (u_long) size, (u_long) (target - size)); + + target -= size; + data += size; + } + + if (DBG_LEVEL >= DBG_data && dev->binary!=NULL) { + fwrite(buffer, len, 1, dev->binary); + } + + return SANE_STATUS_GOOD; +} + +SANE_Status sanei_genesys_bulk_write_data(Genesys_Device * dev, uint8_t addr, uint8_t* data, + size_t len) +{ + DBG_HELPER(dbg); + + // supported: GL646, GL841, GL843 + size_t size; + uint8_t outdata[8]; + + DBG(DBG_io, "%s writing %lu bytes\n", __func__, (u_long) len); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_SET_REGISTER, INDEX, + 1, &addr); + + + size_t max_out_size = sanei_genesys_get_bulk_max_size(dev); + + while (len) { + if (len > max_out_size) + size = max_out_size; + else + size = len; + + if (dev->model->asic_type == GENESYS_GL841) { + outdata[0] = BULK_OUT; + outdata[1] = BULK_RAM; + outdata[2] = VALUE_BUFFER & 0xff; + outdata[3] = (VALUE_BUFFER >> 8) & 0xff; + } else { + outdata[0] = BULK_OUT; + outdata[1] = BULK_RAM; + outdata[2] = 0x00; + outdata[3] = 0x00; + } + + outdata[4] = (size & 0xff); + outdata[5] = ((size >> 8) & 0xff); + outdata[6] = ((size >> 16) & 0xff); + outdata[7] = ((size >> 24) & 0xff); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_BUFFER, 0x00, + sizeof(outdata), outdata); + + dev->usb_dev.bulk_write(data, &size); + + DBG(DBG_io2, "%s: wrote %lu bytes, %lu remaining\n", __func__, (u_long) size, + (u_long) (len - size)); + + len -= size; + data += size; + } + + return SANE_STATUS_GOOD; +} + +/** @brief write to one high (addr >= 0x100) register + * write to a register which address is higher than 0xff. + * @param dev opened device to write to + * @param reg LSB of register address + * @param val value to write + */ +SANE_Status +sanei_genesys_write_hregister (Genesys_Device * dev, uint16_t reg, uint8_t val) +{ + DBG_HELPER(dbg); + + uint8_t buffer[2]; + + buffer[0]=reg & 0xff; + buffer[1]=val; + + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, 0x100 | VALUE_SET_REGISTER, INDEX, + 2, buffer); + + DBG(DBG_io, "%s (0x%02x, 0x%02x) completed\n", __func__, reg, val); + + return SANE_STATUS_GOOD; +} + +/** @brief read from one high (addr >= 0x100) register + * Read to a register which address is higher than 0xff. Second byte is check to detect + * physical link errors. + * @param dev opened device to read from + * @param reg LSB of register address + * @param val value to write + */ +SANE_Status +sanei_genesys_read_hregister (Genesys_Device * dev, uint16_t reg, uint8_t * val) +{ + DBG_HELPER(dbg); + + SANE_Byte value[2]; + + dev->usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_BUFFER, 0x100 | VALUE_GET_REGISTER, + 0x22+((reg & 0xff)<<8), 2, value); + + *val=value[0]; + DBG(DBG_io2, "%s(0x%02x)=0x%02x\n", __func__, reg, *val); + + /* check usb link status */ + if((value[1] & 0xff) != 0x55) + { + DBG(DBG_error,"%s: invalid read, scanner unplugged ?\n", __func__); + return SANE_STATUS_IO_ERROR; + } + return SANE_STATUS_GOOD; +} + +/** + * Write to one GL847 ASIC register +URB 10 control 0x40 0x04 0x83 0x00 len 2 wrote 0xa6 0x04 + */ +static SANE_Status +sanei_genesys_write_gl847_register (Genesys_Device * dev, uint8_t reg, uint8_t val) +{ + DBG_HELPER(dbg); + + uint8_t buffer[2]; + + buffer[0]=reg; + buffer[1]=val; + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_SET_REGISTER, INDEX, + 2, buffer); + + DBG(DBG_io, "%s (0x%02x, 0x%02x) completed\n", __func__, reg, val); + + return SANE_STATUS_GOOD; +} + +/** + * Write to one ASIC register + */ +SANE_Status +sanei_genesys_write_register (Genesys_Device * dev, uint16_t reg, uint8_t val) +{ + DBG_HELPER(dbg); + + SANE_Byte reg8; + + /* 16 bit register address space */ + if(reg>255) + { + return sanei_genesys_write_hregister(dev, reg, val); + } + + /* route to gl847 function if needed */ + if(dev->model->asic_type==GENESYS_GL847 + || dev->model->asic_type==GENESYS_GL845 + || dev->model->asic_type==GENESYS_GL846 + || dev->model->asic_type==GENESYS_GL124) + { + return sanei_genesys_write_gl847_register(dev, reg, val); + } + + reg8=reg & 0xff; + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_SET_REGISTER, INDEX, + 1, ®8); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_WRITE_REGISTER, INDEX, + 1, &val); + + DBG(DBG_io, "%s (0x%02x, 0x%02x) completed\n", __func__, reg, val); + + return SANE_STATUS_GOOD; +} + +/** + * @brief write command to 0x8c endpoint + * Write a value to 0x8c end point (end access), for USB firmware related operations + * Known values are 0x0f, 0x11 for USB 2.0 data transfer and 0x0f,0x14 for USB1.1 + * @param dev device to write to + * @param index index of the command + * @param val value to write + */ +SANE_Status +sanei_genesys_write_0x8c(Genesys_Device * dev, uint8_t index, uint8_t val) +{ + DBG_HELPER_ARGS(dbg, "0x%02x,0x%02x", index, val); + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_BUF_ENDACCESS, index, + 1, &val); + return SANE_STATUS_GOOD; +} + +/* read reg 0x41: + * URB 164 control 0xc0 0x04 0x8e 0x4122 len 2 read 0xfc 0x55 + */ +static SANE_Status +sanei_genesys_read_gl847_register (Genesys_Device * dev, uint16_t reg, uint8_t * val) +{ + DBG_HELPER(dbg); + SANE_Status status = SANE_STATUS_GOOD; + SANE_Byte value[2]; + + dev->usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_BUFFER, VALUE_GET_REGISTER, 0x22+(reg<<8), + 2, value); + + *val=value[0]; + DBG(DBG_io2, "%s(0x%02x)=0x%02x\n", __func__, reg, *val); + + /* check usb link status */ + if((value[1] & 0xff) != 0x55) + { + DBG(DBG_error,"%s: invalid read, scanner unplugged ?\n", __func__); + status=SANE_STATUS_IO_ERROR; + } + return status; +} + +/* Read from one register */ +SANE_Status +sanei_genesys_read_register (Genesys_Device * dev, uint16_t reg, uint8_t * val) +{ + DBG_HELPER(dbg); + + SANE_Byte reg8; + + /* 16 bit register address space */ + if(reg>255) + { + return sanei_genesys_read_hregister(dev, reg, val); + } + + /* route to gl847 function if needed */ + if(dev->model->asic_type==GENESYS_GL847 + || dev->model->asic_type==GENESYS_GL845 + || dev->model->asic_type==GENESYS_GL846 + || dev->model->asic_type==GENESYS_GL124) + return sanei_genesys_read_gl847_register(dev, reg, val); + + /* 8 bit register address space */ + reg8=(SANE_Byte)(reg& 0Xff); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, VALUE_SET_REGISTER, INDEX, + 1, ®8); + + *val = 0; + + dev->usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_REGISTER, VALUE_READ_REGISTER, INDEX, + 1, val); + + DBG(DBG_io, "%s (0x%02x, 0x%02x) completed\n", __func__, reg, *val); + + return SANE_STATUS_GOOD; +} + +/* Set address for writing data */ +SANE_Status +sanei_genesys_set_buffer_address (Genesys_Device * dev, uint32_t addr) +{ + SANE_Status status = SANE_STATUS_GOOD; + + if(dev->model->asic_type==GENESYS_GL847 + || dev->model->asic_type==GENESYS_GL845 + || dev->model->asic_type==GENESYS_GL846 + || dev->model->asic_type==GENESYS_GL124) + { + DBG(DBG_warn, "%s: shouldn't be used for GL846+ ASICs\n", __func__); + return SANE_STATUS_GOOD; + } + + DBG(DBG_io, "%s: setting address to 0x%05x\n", __func__, addr & 0xfffffff0); + + addr = addr >> 4; + + status = sanei_genesys_write_register (dev, 0x2b, (addr & 0xff)); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while writing low byte: %s\n", __func__, sane_strstatus(status)); + return status; + } + + addr = addr >> 8; + status = sanei_genesys_write_register (dev, 0x2a, (addr & 0xff)); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while writing high byte: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBG(DBG_io, "%s: completed\n", __func__); + + return status; +} + +/**@brief read data from analog frontend (AFE) + * @param dev device owning the AFE + * @param addr register address to read + * @param data placeholder for the result + * @return SANE_STATUS_GOOD is OK, else the error code + */ +SANE_Status +sanei_genesys_fe_read_data (Genesys_Device * dev, uint8_t addr, + uint16_t *data) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t value; + Genesys_Register_Set reg; + + + DBG(DBG_proc, "%s: start\n", __func__); + + reg.init_reg(0x50, addr); + + /* set up read address */ + status = dev->model->cmd_set->bulk_write_register(dev, reg); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while bulk writing registers: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + /* read data */ + RIE (sanei_genesys_read_register (dev, 0x46, &value)); + *data=256*value; + RIE (sanei_genesys_read_register (dev, 0x47, &value)); + *data+=value; + + DBG(DBG_io, "%s (0x%02x, 0x%04x)\n", __func__, addr, *data); + DBG(DBG_proc, "%s: completed\n", __func__); + + return status; +} + +/*@brief write data to analog frontend + * writes data to analog frontend to set it up accordingly + * to the sensor settings (exposure, timings, color, bit depth, ...) + * @param dev devie owning the AFE to write to + * @param addr AFE rister address + * @param data value to write to AFE register + **/ +SANE_Status +sanei_genesys_fe_write_data (Genesys_Device * dev, uint8_t addr, + uint16_t data) +{ + SANE_Status status = SANE_STATUS_GOOD; + Genesys_Register_Set reg(Genesys_Register_Set::SEQUENTIAL); + + DBG(DBG_io, "%s (0x%02x, 0x%04x)\n", __func__, addr, data); + + reg.init_reg(0x51, addr); + if (dev->model->asic_type == GENESYS_GL124) { + reg.init_reg(0x5d, (data / 256) & 0xff); + reg.init_reg(0x5e, data & 0xff); + } else { + reg.init_reg(0x3a, (data / 256) & 0xff); + reg.init_reg(0x3b, data & 0xff); + } + + status = dev->model->cmd_set->bulk_write_register(dev, reg); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed while bulk writing registers: %s\n", __func__, + sane_strstatus(status)); + return status; + } + + DBG(DBG_io, "%s: completed\n", __func__); + + return status; +} + +/* ------------------------------------------------------------------------ */ +/* Medium level functions */ +/* ------------------------------------------------------------------------ */ + +/** read the status register + */ +SANE_Status +sanei_genesys_get_status (Genesys_Device * dev, uint8_t * status) +{ + if(dev->model->asic_type==GENESYS_GL124) + return sanei_genesys_read_hregister(dev, 0x101, status); + return sanei_genesys_read_register (dev, 0x41, status); +} + +/** + * decodes and prints content of status register + * @param val value read from status register + */ +void sanei_genesys_print_status (uint8_t val) +{ + char msg[80]; + + sprintf (msg, "%s%s%s%s%s%s%s%s", + val & PWRBIT ? "PWRBIT " : "", + val & BUFEMPTY ? "BUFEMPTY " : "", + val & FEEDFSH ? "FEEDFSH " : "", + val & SCANFSH ? "SCANFSH " : "", + val & HOMESNR ? "HOMESNR " : "", + val & LAMPSTS ? "LAMPSTS " : "", + val & FEBUSY ? "FEBUSY " : "", + val & MOTORENB ? "MOTORENB" : ""); + DBG(DBG_info, "status=%s\n", msg); +} + +#if 0 +/* returns pixels per line from register set */ +/*candidate for moving into chip specific files?*/ +static int +genesys_pixels_per_line (Genesys_Register_Set * reg) +{ + int pixels_per_line; + + pixels_per_line = + sanei_genesys_read_reg_from_set (reg, + 0x32) * 256 + + sanei_genesys_read_reg_from_set (reg, 0x33); + pixels_per_line -= + (sanei_genesys_read_reg_from_set (reg, 0x30) * 256 + + sanei_genesys_read_reg_from_set (reg, 0x31)); + + return pixels_per_line; +} + +/* returns dpiset from register set */ +/*candidate for moving into chip specific files?*/ +static int +genesys_dpiset (Genesys_Register_Set * reg) +{ + int dpiset; + + dpiset = + sanei_genesys_read_reg_from_set (reg, + 0x2c) * 256 + + sanei_genesys_read_reg_from_set (reg, 0x2d); + + return dpiset; +} +#endif + +/** read the number of valid words in scanner's RAM + * ie registers 42-43-44 + */ +/*candidate for moving into chip specific files?*/ +SANE_Status +sanei_genesys_read_valid_words (Genesys_Device * dev, unsigned int *words) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t value; + + DBGSTART; + switch (dev->model->asic_type) + { + case GENESYS_GL124: + RIE (sanei_genesys_read_hregister (dev, 0x102, &value)); + *words = (value & 0x03); + RIE (sanei_genesys_read_hregister (dev, 0x103, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_hregister (dev, 0x104, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_hregister (dev, 0x105, &value)); + *words = *words * 256 + value; + break; + + case GENESYS_GL845: + case GENESYS_GL846: + RIE (sanei_genesys_read_register (dev, 0x42, &value)); + *words = (value & 0x02); + RIE (sanei_genesys_read_register (dev, 0x43, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_register (dev, 0x44, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_register (dev, 0x45, &value)); + *words = *words * 256 + value; + break; + + case GENESYS_GL847: + RIE (sanei_genesys_read_register (dev, 0x42, &value)); + *words = (value & 0x03); + RIE (sanei_genesys_read_register (dev, 0x43, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_register (dev, 0x44, &value)); + *words = *words * 256 + value; + RIE (sanei_genesys_read_register (dev, 0x45, &value)); + *words = *words * 256 + value; + break; + + default: + RIE (sanei_genesys_read_register (dev, 0x44, &value)); + *words = value; + RIE (sanei_genesys_read_register (dev, 0x43, &value)); + *words += (value * 256); + RIE (sanei_genesys_read_register (dev, 0x42, &value)); + if (dev->model->asic_type == GENESYS_GL646) + *words += ((value & 0x03) * 256 * 256); + else + *words += ((value & 0x0f) * 256 * 256); + } + + DBG(DBG_proc, "%s: %d words\n", __func__, *words); + DBGCOMPLETED; + return SANE_STATUS_GOOD; +} + +/** read the number of lines scanned + * ie registers 4b-4c-4d + */ +SANE_Status +sanei_genesys_read_scancnt (Genesys_Device * dev, unsigned int *words) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t value; + + DBG(DBG_proc, "%s: start\n", __func__); + + if (dev->model->asic_type == GENESYS_GL124) + { + RIE (sanei_genesys_read_hregister (dev, 0x10b, &value)); + *words = (value & 0x0f) << 16; + RIE (sanei_genesys_read_hregister (dev, 0x10c, &value)); + *words += (value << 8); + RIE (sanei_genesys_read_hregister (dev, 0x10d, &value)); + *words += value; + } + else + { + RIE (sanei_genesys_read_register (dev, 0x4d, &value)); + *words = value; + RIE (sanei_genesys_read_register (dev, 0x4c, &value)); + *words += (value * 256); + RIE (sanei_genesys_read_register (dev, 0x4b, &value)); + if (dev->model->asic_type == GENESYS_GL646) + *words += ((value & 0x03) * 256 * 256); + else + *words += ((value & 0x0f) * 256 * 256); + } + + DBG(DBG_proc, "%s: %d lines\n", __func__, *words); + return SANE_STATUS_GOOD; +} + +/** @brief Check if the scanner's internal data buffer is empty + * @param *dev device to test for data + * @param *empty return value + * @return empty will be set to SANE_TRUE if there is no scanned data. + **/ +SANE_Status +sanei_genesys_test_buffer_empty (Genesys_Device * dev, SANE_Bool * empty) +{ + uint8_t val = 0; + SANE_Status status = SANE_STATUS_GOOD; + + sanei_genesys_sleep_ms(1); + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: failed to read buffer status: %s\n", __func__, sane_strstatus(status)); + return status; + } + + if (dev->model->cmd_set->test_buffer_empty_bit (val)) + { + /* fix timing issue on USB3 (or just may be too fast) hardware + * spotted by John S. Weber + */ + sanei_genesys_sleep_ms(1); + DBG(DBG_io2, "%s: buffer is empty\n", __func__); + *empty = SANE_TRUE; + return SANE_STATUS_GOOD; + } + + *empty = SANE_FALSE; + + DBG(DBG_io, "%s: buffer is filled\n", __func__); + return SANE_STATUS_GOOD; +} + + +/* Read data (e.g scanned image) from scan buffer */ +SANE_Status +sanei_genesys_read_data_from_scanner (Genesys_Device * dev, uint8_t * data, + size_t size) +{ + SANE_Status status = SANE_STATUS_GOOD; + int time_count = 0; + unsigned int words = 0; + + DBG(DBG_proc, "%s (size = %lu bytes)\n", __func__, (u_long) size); + + if (size & 1) + DBG(DBG_info, "WARNING %s: odd number of bytes\n", __func__); + + /* wait until buffer not empty for up to 5 seconds */ + do + { + status = sanei_genesys_read_valid_words (dev, &words); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: checking for empty buffer failed: %s\n", __func__, + sane_strstatus(status)); + return status; + } + if (words == 0) + { + sanei_genesys_sleep_ms(10); + time_count++; + } + } + while ((time_count < 2500*2) && (words == 0)); + + if (words == 0) /* timeout, buffer does not get filled */ + { + DBG(DBG_error, "%s: timeout, buffer does not get filled\n", __func__); + return SANE_STATUS_IO_ERROR; + } + + status = dev->model->cmd_set->bulk_read_data (dev, 0x45, data, size); + if (status != SANE_STATUS_GOOD) + { + DBG(DBG_error, "%s: reading bulk data failed: %s\n", __func__, sane_strstatus(status)); + return status; + } + + DBG(DBG_proc, "%s: completed\n", __func__); + return SANE_STATUS_GOOD; +} +SANE_Status +sanei_genesys_read_feed_steps (Genesys_Device * dev, unsigned int *steps) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t value; + + DBG(DBG_proc, "%s\n", __func__); + + if (dev->model->asic_type == GENESYS_GL124) + { + RIE (sanei_genesys_read_hregister (dev, 0x108, &value)); + *steps = (value & 0x1f) << 16; + RIE (sanei_genesys_read_hregister (dev, 0x109, &value)); + *steps += (value << 8); + RIE (sanei_genesys_read_hregister (dev, 0x10a, &value)); + *steps += value; + } + else + { + RIE (sanei_genesys_read_register (dev, 0x4a, &value)); + *steps = value; + RIE (sanei_genesys_read_register (dev, 0x49, &value)); + *steps += (value * 256); + RIE (sanei_genesys_read_register (dev, 0x48, &value)); + if (dev->model->asic_type == GENESYS_GL646) + *steps += ((value & 0x03) * 256 * 256); + else if (dev->model->asic_type == GENESYS_GL841) + *steps += ((value & 0x0f) * 256 * 256); + else + *steps += ((value & 0x1f) * 256 * 256); + } + + DBG(DBG_proc, "%s: %d steps\n", __func__, *steps); + return SANE_STATUS_GOOD; +} + +void sanei_genesys_set_lamp_power(Genesys_Device* dev, const Genesys_Sensor& sensor, + Genesys_Register_Set& regs, bool set) +{ + static const uint8_t REG03_LAMPPWR = 0x10; + + if (set) { + regs.find_reg(0x03).value |= REG03_LAMPPWR; + + if (dev->model->asic_type == GENESYS_GL841) { + sanei_genesys_set_exposure(regs, sanei_genesys_fixup_exposure(sensor.exposure)); + regs.set8(0x19, 0x50); + } + + if (dev->model->asic_type == GENESYS_GL843) { + sanei_genesys_set_exposure(regs, sensor.exposure); + } + } else { + regs.find_reg(0x03).value &= ~REG03_LAMPPWR; + + if (dev->model->asic_type == GENESYS_GL841) { + sanei_genesys_set_exposure(regs, {0x0101, 0x0101, 0x0101}); + regs.set8(0x19, 0xff); + } + + if (dev->model->asic_type == GENESYS_GL843) { + if (dev->model->model_id != MODEL_CANON_CANOSCAN_8600F) { + // BUG: datasheet says we shouldn't set exposure to zero + sanei_genesys_set_exposure(regs, {0, 0, 0}); + } + } + } + regs.state.is_lamp_on = set; +} + +void sanei_genesys_set_motor_power(Genesys_Register_Set& regs, bool set) +{ + static const uint8_t REG02_MTRPWR = 0x10; + + if (set) { + regs.find_reg(0x02).value |= REG02_MTRPWR; + } else { + regs.find_reg(0x02).value &= ~REG02_MTRPWR; + } +} + +/** + * Write to many registers at once + * Note: sequential call to write register, no effective + * bulk write implemented. + * @param dev device to write to + * @param reg pointer to an array of registers + * @param elems size of the array + */ +SANE_Status sanei_genesys_bulk_write_register(Genesys_Device * dev, Genesys_Register_Set& reg) +{ + DBG_HELPER(dbg); + + SANE_Status status = SANE_STATUS_GOOD; + + if (dev->model->asic_type == GENESYS_GL646 || + dev->model->asic_type == GENESYS_GL841) + { + uint8_t outdata[8]; + std::vector buffer; + buffer.reserve(reg.size() * 2); + + /* copy registers and values in data buffer */ + for (const auto& r : reg) { + buffer.push_back(r.address); + buffer.push_back(r.value); + } + + DBG(DBG_io, "%s (elems= %lu, size = %lu)\n", __func__, (u_long) reg.size(), + (u_long) buffer.size()); + + if (dev->model->asic_type == GENESYS_GL646) { + outdata[0] = BULK_OUT; + outdata[1] = BULK_REGISTER; + outdata[2] = 0x00; + outdata[3] = 0x00; + outdata[4] = (buffer.size() & 0xff); + outdata[5] = ((buffer.size() >> 8) & 0xff); + outdata[6] = ((buffer.size() >> 16) & 0xff); + outdata[7] = ((buffer.size() >> 24) & 0xff); + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_BUFFER, INDEX, + sizeof(outdata), outdata); + + size_t write_size = buffer.size(); + + dev->usb_dev.bulk_write(buffer.data(), &write_size); + } else { + for (size_t i = 0; i < reg.size();) { + size_t c = reg.size() - i; + if (c > 32) /*32 is max on GL841. checked that.*/ + c = 32; + + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_SET_REGISTER, + INDEX, c * 2, buffer.data() + i * 2); + + i += c; + } + } + } else { + for (const auto& r : reg) { + status = sanei_genesys_write_register (dev, r.address, r.value); + if (status != SANE_STATUS_GOOD) + return status; + } + } + + DBG (DBG_io, "%s: wrote %lu registers\n", __func__, (u_long) reg.size()); + return status; +} + + + +/** + * writes a block of data to AHB + * @param dn USB device index + * @param usb_mode usb mode : 1 usb 1.1, 2 usb 2.0 + * @param addr AHB address to write to + * @param size size of the chunk of data + * @param data pointer to the data to write + */ +SANE_Status +sanei_genesys_write_ahb(Genesys_Device* dev, uint32_t addr, uint32_t size, uint8_t * data) +{ + DBG_HELPER(dbg); + + uint8_t outdata[8]; + size_t written,blksize; + SANE_Status status = SANE_STATUS_GOOD; + int i; + char msg[100]="AHB="; + + outdata[0] = addr & 0xff; + outdata[1] = ((addr >> 8) & 0xff); + outdata[2] = ((addr >> 16) & 0xff); + outdata[3] = ((addr >> 24) & 0xff); + outdata[4] = (size & 0xff); + outdata[5] = ((size >> 8) & 0xff); + outdata[6] = ((size >> 16) & 0xff); + outdata[7] = ((size >> 24) & 0xff); + + if (DBG_LEVEL >= DBG_io) + { + for (i = 0; i < 8; i++) + { + sprintf (msg+strlen(msg), " 0x%02x", outdata[i]); + } + DBG (DBG_io, "%s: write(0x%08x,0x%08x)\n", __func__, addr,size); + DBG (DBG_io, "%s: %s\n", __func__, msg); + } + + // write addr and size for AHB + dev->usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_BUFFER, VALUE_BUFFER, 0x01, 8, outdata); + + size_t max_out_size = sanei_genesys_get_bulk_max_size(dev); + + /* write actual data */ + written = 0; + do + { + if (size - written > max_out_size) + { + blksize = max_out_size; + } + else + { + blksize = size - written; + } + dev->usb_dev.bulk_write(data + written, &blksize); + + written += blksize; + } + while (written < size); + + return status; +} + + +std::vector get_gamma_table(Genesys_Device* dev, const Genesys_Sensor& sensor, + int color) +{ + if (!dev->gamma_override_tables[color].empty()) { + return dev->gamma_override_tables[color]; + } else { + std::vector ret; + sanei_genesys_create_default_gamma_table(dev, ret, sensor.gamma[color]); + return ret; + } +} + +/** @brief generates gamma buffer to transfer + * Generates gamma table buffer to send to ASIC. Applies + * contrast and brightness if set. + * @param dev device to set up + * @param bits number of bits used by gamma + * @param max value for gamma + * @param size of the gamma table + * @param gamma allocated gamma buffer to fill + * @returns SANE_STATUS_GOOD or SANE_STATUS_NO_MEM + */ +SANE_Status sanei_genesys_generate_gamma_buffer(Genesys_Device * dev, + const Genesys_Sensor& sensor, + int bits, + int max, + int size, + uint8_t *gamma) +{ + std::vector rgamma = get_gamma_table(dev, sensor, GENESYS_RED); + std::vector ggamma = get_gamma_table(dev, sensor, GENESYS_GREEN); + std::vector bgamma = get_gamma_table(dev, sensor, GENESYS_BLUE); + + if(dev->settings.contrast!=0 || dev->settings.brightness!=0) + { + std::vector lut(65536); + sanei_genesys_load_lut((unsigned char *)lut.data(), + bits, + bits, + 0, + max, + dev->settings.contrast, + dev->settings.brightness); + for (int i = 0; i < size; i++) + { + uint16_t value=rgamma[i]; + value=lut[value]; + gamma[i * 2 + size * 0 + 0] = value & 0xff; + gamma[i * 2 + size * 0 + 1] = (value >> 8) & 0xff; + + value=ggamma[i]; + value=lut[value]; + gamma[i * 2 + size * 2 + 0] = value & 0xff; + gamma[i * 2 + size * 2 + 1] = (value >> 8) & 0xff; + + value=bgamma[i]; + value=lut[value]; + gamma[i * 2 + size * 4 + 0] = value & 0xff; + gamma[i * 2 + size * 4 + 1] = (value >> 8) & 0xff; + } + } + else + { + for (int i = 0; i < size; i++) + { + uint16_t value=rgamma[i]; + gamma[i * 2 + size * 0 + 0] = value & 0xff; + gamma[i * 2 + size * 0 + 1] = (value >> 8) & 0xff; + + value=ggamma[i]; + gamma[i * 2 + size * 2 + 0] = value & 0xff; + gamma[i * 2 + size * 2 + 1] = (value >> 8) & 0xff; + + value=bgamma[i]; + gamma[i * 2 + size * 4 + 0] = value & 0xff; + gamma[i * 2 + size * 4 + 1] = (value >> 8) & 0xff; + } + } + + return SANE_STATUS_GOOD; +} + + +/** @brief send gamma table to scanner + * This function sends generic gamma table (ie ones built with + * provided gamma) or the user defined one if provided by + * fontend. Used by gl846+ ASICs + * @param dev device to write to + */ +SANE_Status +sanei_genesys_send_gamma_table(Genesys_Device * dev, const Genesys_Sensor& sensor) +{ + int size; + int i; + uint8_t val; + SANE_Status status = SANE_STATUS_GOOD; + + DBGSTART; + + size = 256 + 1; + + /* allocate temporary gamma tables: 16 bits words, 3 channels */ + std::vector gamma(size * 2 * 3, 255); + + RIE(sanei_genesys_generate_gamma_buffer(dev, sensor, 16, 65535, size, gamma.data())); + + /* loop sending gamma tables NOTE: 0x01000000 not 0x10000000 */ + for (i = 0; i < 3; i++) + { + /* clear corresponding GMM_N bit */ + RIE(sanei_genesys_read_register(dev, 0xbd, &val)); + val &= ~(0x01 << i); + RIE(sanei_genesys_write_register(dev, 0xbd, val)); + + /* clear corresponding GMM_F bit */ + RIE(sanei_genesys_read_register(dev, 0xbe, &val)); + val &= ~(0x01 << i); + RIE(sanei_genesys_write_register(dev, 0xbe, val)); + + // FIXME: currently the last word of each gamma table is not initialied, so to work around + // unstable data, just set it to 0 which is the most likely value of uninitialized memory + // (proper value is probably 0xff) + gamma[size * 2 * i + size * 2 - 2] = 0; + gamma[size * 2 * i + size * 2 - 1] = 0; + + /* set GMM_Z */ + RIE(sanei_genesys_write_register (dev, 0xc5+2*i, gamma[size*2*i+1])); + RIE(sanei_genesys_write_register (dev, 0xc6+2*i, gamma[size*2*i])); + + status = sanei_genesys_write_ahb(dev, 0x01000000 + 0x200 * i, (size-1) * 2, gamma.data() + i * size * 2+2); + if (status != SANE_STATUS_GOOD) + { + DBG (DBG_error, + "%s: write to AHB failed writing table %d (%s)\n", __func__, + i, sane_strstatus (status)); + break; + } + } + + DBGCOMPLETED; + return status; +} + +/** @brief initialize device + * Initialize backend and ASIC : registers, motor tables, and gamma tables + * then ensure scanner's head is at home. Designed for gl846+ ASICs. + * Detects cold boot (ie first boot since device plugged) in this case + * an extensice setup up is done at hardware level. + * + * @param dev device to initialize + * @param max_regs umber of maximum used registers + * @return SANE_STATUS_GOOD in case of success + */ +SANE_Status +sanei_genesys_asic_init(Genesys_Device* dev, int /*max_regs*/) +{ + DBG_HELPER(dbg); + + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + SANE_Bool cold = SANE_TRUE; + + DBGSTART; + + // URB 16 control 0xc0 0x0c 0x8e 0x0b len 1 read 0x00 */ + dev->usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_REGISTER, VALUE_GET_REGISTER, 0x00, 1, &val); + + DBG (DBG_io2, "%s: value=0x%02x\n", __func__, val); + DBG (DBG_info, "%s: device is %s\n", __func__, (val & 0x08) ? "USB 1.0" : "USB2.0"); + if (val & 0x08) + { + dev->usb_mode = 1; + } + else + { + dev->usb_mode = 2; + } + + /* check if the device has already been initialized and powered up + * we read register 6 and check PWRBIT, if reset scanner has been + * freshly powered up. This bit will be set to later so that following + * reads can detect power down/up cycle*/ + RIE (sanei_genesys_read_register (dev, 0x06, &val)); + /* test for POWER bit */ + if (val & 0x10) + { + cold = SANE_FALSE; + } + DBG (DBG_info, "%s: device is %s\n", __func__, cold ? "cold" : "warm"); + + /* don't do anything if backend is initialized and hardware hasn't been + * replug */ + if (dev->already_initialized && !cold) + { + DBG (DBG_info, "%s: already initialized, nothing to do\n", __func__); + return SANE_STATUS_GOOD; + } + + /* set up hardware and registers */ + RIE (dev->model->cmd_set->asic_boot (dev, cold)); + + /* now hardware part is OK, set up device struct */ + dev->white_average_data.clear(); + dev->dark_average_data.clear(); + + dev->settings.color_filter = ColorFilter::RED; + + /* duplicate initial values into calibration registers */ + dev->calib_reg = dev->reg; + + const auto& sensor = sanei_genesys_find_sensor_any(dev); + + /* Set analog frontend */ + RIE (dev->model->cmd_set->set_fe(dev, sensor, AFE_INIT)); + + dev->already_initialized = SANE_TRUE; + + /* Move to home if needed */ + RIE (dev->model->cmd_set->slow_back_home (dev, SANE_TRUE)); + dev->scanhead_position_in_steps = 0; + + /* Set powersaving (default = 15 minutes) */ + RIE (dev->model->cmd_set->set_powersaving (dev, 15)); + + return status; +} + +/** + * Wait for the scanning head to park + */ +SANE_Status +sanei_genesys_wait_for_home (Genesys_Device * dev) +{ + SANE_Status status = SANE_STATUS_GOOD; + uint8_t val; + int loop; + int max=300; + + DBGSTART; + + /* clear the parking status whatever the outcome of the function */ + dev->parking=SANE_FALSE; + + /* read initial status, if head isn't at home and motor is on + * we are parking, so we wait. + * gl847/gl124 need 2 reads for reliable results */ + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG (DBG_error, + "%s: failed to read home sensor: %s\n", __func__, + sane_strstatus (status)); + return status; + } + sanei_genesys_sleep_ms(10); + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG (DBG_error, + "%s: failed to read home sensor: %s\n", __func__, + sane_strstatus (status)); + return status; + } + + /* if at home, return */ + if(val & HOMESNR) + { + DBG (DBG_info, + "%s: already at home\n", __func__); + return status; + } + + /* loop for 30 s max, polling home sensor */ + loop = 0; + do + { + sanei_genesys_sleep_ms(100); + status = sanei_genesys_get_status (dev, &val); + if (status != SANE_STATUS_GOOD) + { + DBG (DBG_error, + "%s: failed to read home sensor: %s\n", __func__, + sane_strstatus (status)); + return status; + } + if (DBG_LEVEL >= DBG_io2) + { + sanei_genesys_print_status (val); + } + ++loop; + } + while (loop < max && !(val & HOMESNR) && status == SANE_STATUS_GOOD); + + /* if after the timeout, head is still not parked, error out */ + if(loop >= max && !(val & HOMESNR) && status == SANE_STATUS_GOOD) + { + DBG (DBG_error, "%s: failed to reach park position %ds\n", __func__, max/10); + return SANE_STATUS_IO_ERROR; + } + + DBGCOMPLETED; + return status; +} + +/**@brief compute hardware sensor dpi to use + * compute the sensor hardware dpi based on target resolution. + * A lower dpihw enable faster scans. + * @param dev device used for the scan + * @param xres x resolution of the scan + * @return the hardware dpi to use + */ +int sanei_genesys_compute_dpihw(Genesys_Device *dev, const Genesys_Sensor& sensor, int xres) +{ + /* some scanners use always hardware dpi for sensor */ + if (dev->model->flags & GENESYS_FLAG_FULL_HWDPI_MODE) + { + return sensor.optical_res; + } + + /* can't be below 600 dpi */ + if (xres <= 600) + { + return 600; + } + if (xres <= sensor.optical_res / 4) + { + return sensor.optical_res / 4; + } + if (xres <= sensor.optical_res / 2) + { + return sensor.optical_res / 2; + } + return sensor.optical_res; +} + +// sanei_genesys_compute_dpihw returns the dpihw that is written to register. +// However the number of pixels depends on half_ccd mode +int sanei_genesys_compute_dpihw_calibration(Genesys_Device *dev, const Genesys_Sensor& sensor, + int xres) +{ + if (dev->model->model_id == MODEL_CANON_CANOSCAN_8600F) + { + // real resolution is half of the "official" resolution - half_ccd mode + int hwres = sensor.optical_res / sensor.get_ccd_size_divisor_for_dpi(xres); + + if (xres <= hwres / 4) + { + return hwres / 4; + } + if (xres <= hwres / 2) + { + return hwres / 2; + } + return hwres; + } + + return sanei_genesys_compute_dpihw(dev, sensor, xres); +} + +/** @brief motor profile + * search for the database of motor profiles and get the best one. Each + * profile is at full step and at a reference exposure. Use first entry + * by default. + * @param motors motor profile database + * @param motor_type motor id + * @param exposure exposure time + * @return a pointer to a Motor_Profile struct + */ +Motor_Profile *sanei_genesys_get_motor_profile(Motor_Profile *motors, int motor_type, int exposure) +{ + unsigned int i; + int idx; + + i=0; + idx=-1; + while(motors[i].exposure!=0) + { + /* exact match */ + if(motors[i].motor_type==motor_type && motors[i].exposure==exposure) + { + return &(motors[i]); + } + + /* closest match */ + if(motors[i].motor_type==motor_type) + { + /* if profile exposure is higher than the required one, + * the entry is a candidate for the closest match */ + if(motors[i].exposure>=exposure) + { + if(idx<0) + { + /* no match found yet */ + idx=i; + } + else + { + /* test for better match */ + if(motors[i].exposurestep_type; +} + +/** @brief generate slope table + * Generate the slope table to use for the scan using a reference slope + * table. + * @param slope pointer to the slope table to fill + * @param steps pointer to return used step number + * @param dpi desired motor resolution + * @param exposure exposure used + * @param base_dpi base resolution of the motor + * @param step_type step type used for scan + * @param factor shrink factor for the slope + * @param motor_type motor id + * @param motors motor profile database + */ +int sanei_genesys_slope_table(uint16_t *slope, + int *steps, + int dpi, + int exposure, + int base_dpi, + int step_type, + int factor, + int motor_type, + Motor_Profile *motors) +{ +int sum, i; +uint16_t target,current; +Motor_Profile *profile; + + /* required speed */ + target=((exposure * dpi) / base_dpi)>>step_type; + DBG (DBG_io2, "%s: exposure=%d, dpi=%d, target=%d\n", __func__, exposure, dpi, target); + + /* fill result with target speed */ + for(i=0;itable[0]; + + /* loop on profile copying and apply step type */ + while(profile->table[i]!=0 && current>=target) + { + slope[i]=current; + sum+=slope[i]; + i++; + current=profile->table[i]>>step_type; + } + + /* ensure last step is required speed in case profile doesn't contain it */ + if(current!=0 && currenttable[i]==0 && DBG_LEVEL >= DBG_warn && current>target) + { + DBG (DBG_warn,"%s: short slope table, failed to reach %d. target too low ?\n",__func__,target); + } + if(i<3 && DBG_LEVEL >= DBG_warn) + { + DBG (DBG_warn,"%s: short slope table, failed to reach %d. target too high ?\n",__func__,target); + } + + /* align on factor */ + while(i%factor!=0) + { + slope[i+1]=slope[i]; + sum+=slope[i]; + i++; + } + + /* ensure minimal slope size */ + while(i<2*factor) + { + slope[i+1]=slope[i]; + sum+=slope[i]; + i++; + } + + // return used steps and taken time + *steps=i/factor; + return sum; +} + +/** @brief returns the lowest possible ydpi for the device + * Parses device entry to find lowest motor dpi. + * @param dev device description + * @return lowest motor resolution + */ +int sanei_genesys_get_lowest_ydpi(Genesys_Device *dev) +{ + int min=20000; + int i=0; + + while(dev->model->ydpi_values[i]!=0) + { + if(dev->model->ydpi_values[i]model->ydpi_values[i]; + } + i++; + } + return min; +} + +/** @brief returns the lowest possible dpi for the device + * Parses device entry to find lowest motor or sensor dpi. + * @param dev device description + * @return lowest motor resolution + */ +int sanei_genesys_get_lowest_dpi(Genesys_Device *dev) +{ + int min=20000; + int i=0; + + while(dev->model->ydpi_values[i]!=0) + { + if(dev->model->ydpi_values[i]model->ydpi_values[i]; + } + i++; + } + i=0; + while(dev->model->xdpi_values[i]!=0) + { + if(dev->model->xdpi_values[i]model->xdpi_values[i]; + } + i++; + } + return min; +} + +/** @brief check is a cache entry may be used + * Compares current settings with the cache entry and return + * SANE_TRUE if they are compatible. + * A calibration cache is compatible if color mode and x dpi match the user + * requested scan. In the case of CIS scanners, dpi isn't a criteria. + * flatbed cache entries are considred too old and then expires if they + * are older than the expiration time option, forcing calibration at least once + * then given time. */ +bool sanei_genesys_is_compatible_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, + Genesys_Calibration_Cache * cache, int for_overwrite) +{ +#ifdef HAVE_SYS_TIME_H + struct timeval time; +#endif + int compatible = 1, resolution; + + DBGSTART; + + if(dev->model->cmd_set->calculate_current_setup==NULL) + { + DBG (DBG_proc, "%s: no calculate_setup, non compatible cache\n", __func__); + return false; + } + + dev->model->cmd_set->calculate_current_setup(dev, sensor); + + DBG (DBG_proc, "%s: checking\n", __func__); + + /* a calibration cache is compatible if color mode and x dpi match the user + * requested scan. In the case of CIS scanners, dpi isn't a criteria */ + if (dev->model->is_cis == SANE_FALSE) + { + resolution = dev->settings.xres; + if(resolution>sensor.optical_res) + { + resolution=sensor.optical_res; + } + compatible = (resolution == ((int) cache->used_setup.xres)); + } + else + { + resolution=sanei_genesys_compute_dpihw(dev, sensor, dev->settings.xres); + compatible = (resolution == ((int) sanei_genesys_compute_dpihw(dev, sensor,cache->used_setup.xres))); + } + DBG (DBG_io, "%s: after resolution check current compatible=%d\n", __func__, compatible); + if (dev->current_setup.ccd_size_divisor != cache->used_setup.ccd_size_divisor) + { + DBG (DBG_io, "%s: half_ccd=%d, used=%d\n", __func__, + dev->current_setup.ccd_size_divisor, cache->used_setup.ccd_size_divisor); + compatible = 0; + } + if (dev->current_setup.params.scan_method != cache->used_setup.params.scan_method) + { + DBG (DBG_io, "%s: current method=%d, used=%d\n", __func__, + static_cast(dev->current_setup.params.scan_method), + static_cast(cache->used_setup.params.scan_method)); + compatible = 0; + } + if (!compatible) + { + DBG (DBG_proc, "%s: completed, non compatible cache\n", __func__); + return false; + } + + /* a cache entry expires after afetr expiration time for non sheetfed scanners */ + /* this is not taken into account when overwriting cache entries */ +#ifdef HAVE_SYS_TIME_H + if(for_overwrite == SANE_FALSE && dev->settings.expiration_time >=0) + { + gettimeofday (&time, NULL); + if ((time.tv_sec - cache->last_calibration > dev->settings.expiration_time*60) + && (dev->model->is_sheetfed == SANE_FALSE) + && (dev->settings.scan_method == ScanMethod::FLATBED)) + { + DBG (DBG_proc, "%s: expired entry, non compatible cache\n", __func__); + return false; + } + } +#endif + + DBGCOMPLETED; + return true; +} + + +/** @brief compute maximum line distance shift + * compute maximum line distance shift for the motor and sensor + * combination. Line distance shift is the distance between different + * color component of CCD sensors. Since these components aren't at + * the same physical place, they scan diffrent lines. Software must + * take this into account to accurately mix color data. + * @param dev device session to compute max_shift for + * @param channels number of color channels for the scan + * @param yres motor resolution used for the scan + * @param flags scan flags + * @return 0 or line distance shift + */ +int sanei_genesys_compute_max_shift(Genesys_Device *dev, + int channels, + int yres, + int flags) +{ + int max_shift; + + max_shift=0; + if (channels > 1 && !(flags & SCAN_FLAG_IGNORE_LINE_DISTANCE)) + { + max_shift = dev->ld_shift_r; + if (dev->ld_shift_b > max_shift) + max_shift = dev->ld_shift_b; + if (dev->ld_shift_g > max_shift) + max_shift = dev->ld_shift_g; + max_shift = (max_shift * yres) / dev->motor.base_ydpi; + } + return max_shift; +} + +/** @brief build lookup table for digital enhancements + * Function to build a lookup table (LUT), often + used by scanners to implement brightness/contrast/gamma + or by backends to speed binarization/thresholding + + offset and slope inputs are -127 to +127 + + slope rotates line around central input/output val, + 0 makes horizontal line + + pos zero neg + . x . . x + . x . . x + out . x .xxxxxxxxxxx . x + . x . . x + ....x....... ............ .......x.... + in in in + + offset moves line vertically, and clamps to output range + 0 keeps the line crossing the center of the table + + high low + . xxxxxxxx . + . x . + out x . x + . . x + ............ xxxxxxxx.... + in in + + out_min/max provide bounds on output values, + useful when building thresholding lut. + 0 and 255 are good defaults otherwise. + * @param lut pointer where to store the generated lut + * @param in_bits number of bits for in values + * @param out_bits number of bits of out values + * @param out_min minimal out value + * @param out_max maximal out value + * @param slope slope of the generated data + * @param offset offset of the generated data + */ +SANE_Status +sanei_genesys_load_lut (unsigned char * lut, + int in_bits, + int out_bits, + int out_min, + int out_max, + int slope, + int offset) +{ + SANE_Status ret = SANE_STATUS_GOOD; + int i, j; + double shift, rise; + int max_in_val = (1 << in_bits) - 1; + int max_out_val = (1 << out_bits) - 1; + uint8_t *lut_p8 = lut; + uint16_t *lut_p16 = (uint16_t *) lut; + + DBGSTART; + + /* slope is converted to rise per unit run: + * first [-127,127] to [-.999,.999] + * then to [-PI/4,PI/4] then [0,PI/2] + * then take the tangent (T.O.A) + * then multiply by the normal linear slope + * because the table may not be square, i.e. 1024x256*/ + rise = tan ((double) slope / 128 * M_PI_4 + M_PI_4) * max_out_val / max_in_val; + + /* line must stay vertically centered, so figure + * out vertical offset at central input value */ + shift = (double) max_out_val / 2 - (rise * max_in_val / 2); + + /* convert the user offset setting to scale of output + * first [-127,127] to [-1,1] + * then to [-max_out_val/2,max_out_val/2]*/ + shift += (double) offset / 127 * max_out_val / 2; + + for (i = 0; i <= max_in_val; i++) + { + j = rise * i + shift; + + /* cap data to required range */ + if (j < out_min) + { + j = out_min; + } + else if (j > out_max) + { + j = out_max; + } + + /* copy result according to bit depth */ + if (out_bits <= 8) + { + *lut_p8 = j; + lut_p8++; + } + else + { + *lut_p16 = j; + lut_p16++; + } + } + + DBGCOMPLETED; + return ret; +} + +void sanei_genesys_usleep(unsigned int useconds) +{ + usleep(useconds); +} + +void sanei_genesys_sleep_ms(unsigned int milliseconds) +{ + sanei_genesys_usleep(milliseconds * 1000); +} + +static std::unique_ptr>> s_functions_run_at_backend_exit; + +void add_function_to_run_at_backend_exit(std::function function) +{ + if (!s_functions_run_at_backend_exit) + s_functions_run_at_backend_exit.reset(new std::vector>()); + s_functions_run_at_backend_exit->push_back(std::move(function)); +} + +void run_functions_at_backend_exit() +{ + for (auto it = s_functions_run_at_backend_exit->rbegin(); + it != s_functions_run_at_backend_exit->rend(); ++it) + { + (*it)(); + } + s_functions_run_at_backend_exit.release(); +} + +void debug_dump(unsigned level, const Genesys_Settings& settings) +{ + DBG(level, "settings:\n" + "Resolution X/Y : %u / %u dpi\n" + "Lines : %u\n" + "Pixels per line : %u\n" + "Depth : %u\n" + "Start position X/Y : %.3f/%.3f\n" + "Scan mode : %d\n\n", + settings.xres, settings.yres, + settings.lines, settings.pixels, settings.depth, + settings.tl_x, settings.tl_y, + static_cast(settings.scan_mode)); +} + +void debug_dump(unsigned level, const SetupParams& params) +{ + DBG(level, "settings:\n" + "Resolution X/Y : %u / %u dpi\n" + "Lines : %u\n" + "Pixels per line : %u\n" + "Depth : %u\n" + "Channels : %u\n" + "Start position X/Y : %g / %g\n" + "Scan mode : %d\n" + "Color filter : %d\n" + "Flags : %x\n", + params.xres, params.yres, + params.lines, params.pixels, + params.depth, params.channels, + params.startx, params.starty, + static_cast(params.scan_mode), + static_cast(params.color_filter), + params.flags); +} + +void debug_dump(unsigned level, const Genesys_Current_Setup& setup) +{ + DBG(level, "current_setup:\n" + "Pixels: %d\n" + "Lines: %d\n" + "Depth: %d\n" + "Channels: %d\n" + "exposure_time: %d\n" + "Resolution X/Y: %g %g\n" + "ccd_size_divisor: %d\n" + "stagger: %d\n" + "max_shift: %d\n", + setup.pixels, + setup.lines, + setup.depth, + setup.channels, + setup.exposure_time, + setup.xres, setup.yres, + setup.ccd_size_divisor, + setup.stagger, + setup.max_shift); +} -- cgit v1.2.3