From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= <debian@jff-webhosting.net>
Date: Mon, 6 Oct 2014 14:00:40 +0200
Subject: Initial import of sane-backends version 1.0.24-1.2

---
 backend/umax.conf.in | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 backend/umax.conf.in

(limited to 'backend/umax.conf.in')

diff --git a/backend/umax.conf.in b/backend/umax.conf.in
new file mode 100644
index 0000000..a57cf53
--- /dev/null
+++ b/backend/umax.conf.in
@@ -0,0 +1,117 @@
+#
+# Options for the umax backend
+#
+
+# define scsi queueing depth
+#option scsi-maxqueue 2
+
+# define scsi buffer size in bytes
+#option scsi-buffer-size-min 65536
+#option scsi-buffer-size-max 262144
+
+# define scan lines that shall be read in one block
+#option scan-lines 100
+#option preview-lines 20
+
+# define how to handle bad sense codes
+#   0 = handle as device busy
+#   1 = handle as ok
+#   2 = handle as i/o error
+#   3 = ignore bad error code - continue sense handler,  
+#option handle-bad-sense-error 0
+
+# define if a request sense command shall be executed
+#option execute-request-sense 0
+
+# define if the preview bit shall be set when scanning in rgb mode
+#option force-preview-bit-rgb 0
+
+# define if slow speed flag shall be set
+# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET FALSE
+# -1 = automatically set by driver - if known
+#  0 = disabled
+#  1 = enabled
+#option slow-speed 0
+
+# define if care-about-smeraring flag shall be set
+# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET FALSE
+# -1 = automatically set by driver - if known
+#  0 = disabled
+#  1 = enabled
+#option care-about-smearing 0
+
+# define if the calibration shall be done for selected scanarea or for each ccd pixel
+# -1 = automatically set by driver - if known
+#  0 = disabled
+#  1 = enabled    
+#option calibration-full-ccd 1
+
+# define if an offset of the calculate calibration with has to be used
+# -99999 = auto
+#option calibration-width-offset -99999
+
+# define the number of pixels that is used for calibration
+# -1 = disabled
+#  0 = not set
+#  1 = 1 byte/pixel,
+#  2 = 2 bytes/pixel  
+#option calibration-bytes-pixel -1
+
+# define if scanner uses the same exposure times for red, green and blue
+# -1 = automatically set by driver - if known
+#  0 = disabled (own selection for red, green and blue)
+#  1 = enabled (same values for red, green and blue)
+#options exposure-time-rgb-bind 0
+
+# define if shading data shall be inverted befor sending it back to the scanner
+# -1 = automatically set by driver - if known
+#  0 = disabled
+#  1 = enabled 
+#option invert-shading-data 0
+
+# define if the scanner supports lamp control commands
+# 0 = automatically set by driver - if known
+# 1 = enabled 
+#option lamp-control-available 0
+
+# define how 16 bit gamma data is padded
+# -1 = automatically set by driver - if known
+#  0 = gamma data is msb padded
+#  1 = gamma data is lsb padded 
+#option gamma-lsb-padded 0
+
+# define connection type of following devices
+# 1 = scsi
+# 2 = usb
+#option connection-type 1
+
+# linux device identification:
+#scsi vendor model type bus channel id lun
+scsi UMAX * Scanner
+scsi LinoHell JADE
+scsi LinoHell Office
+scsi LinoHell Office2
+scsi LinoHell SAPHIR2
+scsi LinoHell SAPHIR3
+scsi Linotype SAPHIR4
+scsi LinoHell OPAL2
+scsi HDM LS4H1S
+scsi Nikon AX-110
+scsi Nikon AX-210
+scsi KYE ColorPage-HR5
+scsi EPSON Perfection600
+scsi ESCORT "Galleria 600S"
+scsi TriGem PowerScanII
+
+# Umax Astra 2200 via USB:
+# usb vendor product
+usb 0x1606 0x0230
+
+# scsi device list
+option connection-type 1
+/dev/scanner
+
+# usb device list
+option connection-type 2
+/dev/usbscanner
+
-- 
cgit v1.2.3