From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= <debian@jff-webhosting.net>
Date: Mon, 6 Oct 2014 14:00:40 +0200
Subject: Initial import of sane-backends version 1.0.24-1.2

---
 backend/umax_pp.conf.in | 64 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 backend/umax_pp.conf.in

(limited to 'backend/umax_pp.conf.in')

diff --git a/backend/umax_pp.conf.in b/backend/umax_pp.conf.in
new file mode 100644
index 0000000..e7e9fd4
--- /dev/null
+++ b/backend/umax_pp.conf.in
@@ -0,0 +1,64 @@
+# For documentation see sane-umax_pp(5)
+
+# GLOBAL #
+
+# size (in bytes) of scan buffer (default: 2 megabyte)
+option buffer 2097152
+
+
+# the following options are local to this scanner
+# gain for red channel, if not given, will be automatically computed
+# must be between 0 and 15
+#option red-gain 8
+
+# gain for green channel, if not given, will be automatically computed
+# must be between 0 and 15
+#option green-gain 4
+
+# gain for blue channel, if not given, will be automatically computed
+# must be between 0 and 15
+#option blue-gain 8
+
+# offset for red channel, if not given, will default to 0
+# must be between 0 and 15
+#option red-offset 2
+
+# offset for green channel, if not given, will default to 0
+# must be between 0 and 15
+#option green-offset 1
+
+# offset for blue channel, if not given, will default to 0
+# must be between 0 and 15
+#option blue-offset 1
+
+
+#
+#
+# model number
+#
+# valid values are 610, 1220, 1600 and 2000
+#
+# by default, no model, we rely on autodetection
+# in case you have black or 'inverted' scans, 
+# you may override detection by providing the
+# model number
+#option astra 1220
+
+# DEVICES #
+
+# specify the port your scanner is connected to. 
+#
+# the value 'auto' will make the backend find the correct value
+# by itself, it will scan  ppdev, ppi device, then hardware address
+# 'safe-auto' will do the same but won't do direct hardware access
+# on linux systems, you may provide the device name of the ppdev character 
+# device : /dev/parport0, /dev/parport1, ......
+#
+# on *BSD, you may provide the device name of the ppi device: /dev/ppi0,
+# /dev/ppi1, ...
+#
+# Possible hardware addresses are 0x378 (lp0)
+# 0x278 (lp2) and 0x3c8 (lp1)
+#
+
+port safe-auto
-- 
cgit v1.2.3