From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/matsushita/matsushita.txt | 189 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 doc/matsushita/matsushita.txt (limited to 'doc/matsushita/matsushita.txt') diff --git a/doc/matsushita/matsushita.txt b/doc/matsushita/matsushita.txt new file mode 100644 index 0000000..72b8fcd --- /dev/null +++ b/doc/matsushita/matsushita.txt @@ -0,0 +1,189 @@ +Made by Kyushu Matsushita Electric, a.k.a. Panasonic +http://www.kme.panasonic.co.jp/ +http://panasonic.com/ + +The same twain driver handle these scanners: +Same family as KV-SS25, KV-SS50, KV-SS55, KV-SS50EX, KV-SS55EX, KV-SS850, KV-SS855. + +Another driver handle the KV-S2055L, KV-S2055W. + +However all these scanner show similarities. + +/*--------------------------------------------------------------------------*/ + +SCSI commands supported by the KV-SS25: + +TEST UNIT READY: +00 00 00 00 00 00 + +REQUEST SENSE: +03 00 00 00 0E 00 + a return after a short read is: + f0 00 60 00 00 00 02 0a 00 00 00 00 00 00 00 00 + a return after a jam (sure?) + f0 00 03 00 00 00 00 0a 00 00 00 00 80 01 00 00 + no paper + f0 00 03 00 00 00 00 0a 00 00 00 00 3a 00 00 00 + jam door open: + f0 00 02 00 00 00 00 0a 00 00 00 00 04 81 00 00 + paper jam + f0 00 03 00 00 00 00 0a 00 00 00 00 80 04 00 00 + after a power cycle + f0 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 + after ???? + f0 00 05 00 00 00 00 0a 00 00 00 00 2c 02 00 00 + out of memory (scan data too big for scanner) + f0 00 05 00 00 00 00 0a 00 00 00 00 2c 80 00 00 + +INQUIRY: +12 00 00 00 60 00 + result: + 06 00 02 02 5B 00 00 10 4B 2E 4D 2E 45 2E 20 20 + 4B 56 2D 53 53 32 35 41 20 20 20 20 20 20 20 20 + 31 2E 30 35 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SET WINDOWS: +24 00 00 00 00 00 00 00 00 00 + reset (?) +24 00 00 00 00 00 00 00 48 00 + 72 bytes. + 6-7 = 0x40 = window descriptor length + + Window Descriptor Block: + 0 = page side + 0x00 = front + 0x80 = back + 2-3 = X resolution + 4-5 = Y Resolution + 14-17 = width (size in inches * 1200) + 18-21 = length (size in inches * 1200) + 22 = 255 - brightness + 23 = same as 22 + 24 = contrast + 25 = image composition + 0x00 = black&white (1 bit) + 0x01 = black&white with halftone pattern + 0x02 = grayscale + 26 = bits/pixel + 0x01, if image comp == 0 + 0x04, if image comp == (0x01 || 0x02) -> grayscale 4 bits + 0x08, if image comp == 0x02 -> grayscale 8 bits + 28 = haltone pattern + 0x00 = Bayer 64 + 0x01 = Bayer 16 + 0x02 = Dot 32 + 0x03 = Dot 64 + 0x04 = Error diffusion + 0x80 = User downloaded pattern + 29 = reverse image + 0x00 = no reverse + 0x80 = reverse + 43 = image emphasis + 0x80 smooth + 0x00 none + 0x01 low + 0x30 medium (twain default) + 0x50 high + 44 = gamma (Gray 4/8 only) + 0x00 normal + 0x01 from CRT + 0x80 gamma table 0 (previously downloaded) + 0x81 gamma table 1 (previously downloaded) + 0x82 gamma table 2 (previously downloaded) + 0x83 gamma table 3 (previously downloaded) + 47 = ? (only used by the ISIS driver) + bit 7 = ? set by the ISIS driver + bit 6 = length control + bit 2 = ? set by the ISIS driver + bit 1 = ? set by the ISIS driver + 48-51 = width (again?, maybe paper size) + 52-55 = length (again?, maybe paper size) + 57 = feeder mode + 0x00 = one page + other = number of pages to read (TWAIN driver defaults to 0xff) + 58 = auto threshold + 0x00 = none (twain default) + 0x80 = mode 1 + 0x81 = mode 2 + 0x82 = mode 3 + 59 = automatic separation + 0x00 = no (twain default) + 0x80 = yes + 60 = white level + 0x00 = from white stick (twain default) + 0x80 = from paper + 0x81 = automatic + 61 = noise reduction + 0x00 = none (twain default) + 0x01 = 1x1 + 0x02 = 2x2 + 0x03 = 3x3 + 0x04 = 4x4 + 0x05 = 5x5 + +READ: +28 00 80 00 00 00 00 00 10 00 +28 00 00 00 00 00 00 80 00 00 + 2 = data type code + 0x00 image data + The TWAIN driver always reads 0x8000 bytes at the time, except for + the last packet where it read the size left plus 2 more bytes (and + thus generating a check condition). + + 5: page side + 0x00 = front + 0x80 = back + + 0x80 image size in dots + 3(?)-4: number of the page to read. Multipage mode. + + returns 16 bytes: + 0-3: length in pixels + 4-7: width in lines + +SEND(10): + 2A 00 03 00 00 01 00 01 0A 00 + 2 = data type code + 0x02 = halftone pattern + data is 10 bytes of header + 64 bytes for the matrix + 0x03 = gamma table + data is 10 bytes of header + 256 bytes for the table + 5 = gamma table number (data type code is 2) + the scanner can store 4 gamma tables (from 0 to 3) + 7-8 = length + +SET AREA (?) +C0 00 00 00 00 00 00 00 58 00 +Total message length = 88 bytes + 7 = length -> 0x40 = 64 bytes + 14-17 = area 1 X + 18-21 = area 1 Y + 22-25 = area 1 width + 26-29 = area 1 length + 33 = image composition + 1 = halftone + 36 = haltone pattern (if image composition == 1) + 0x00 = Bayer 64 + 0x01 = Bayer 16 + 0x02 = Dot 32 + 0x03 = Dot 64 + 0x04 = Error diffusion + 50-53 = area 2 X + 54-57 = area 2 Y + 58-61 = area 2 width + 62-65 = area 2 length + 68-71 = area 3 X + 72-75 = area 3 Y + 76-79 = area 3 width + 80-83 = area 3 length + + +Other supported commands: +16 RESERVE UNIT +17 RELEASE UNIT +1D SEND DIAGNOSTIC +31 OBJECT POSITION +3B WRITE BUFFER -- cgit v1.2.3