From 351b7328520c16730ceb46e5acae16038c42185e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Tue, 16 Feb 2021 18:24:19 +0100 Subject: New upstream version 1.0.32 --- doc/sane-microtek2.man | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'doc/sane-microtek2.man') diff --git a/doc/sane-microtek2.man b/doc/sane-microtek2.man index cc4f6f4..45756ed 100644 --- a/doc/sane-microtek2.man +++ b/doc/sane-microtek2.man @@ -9,15 +9,17 @@ provides access to Microtek scanners with a SCSI-2 command set. This backend can be considered alpha to beta. Some scanner models are reported to work well, others not. New development versions of this backend can be obtained from -.B http://karstenfestag.gmxhome.de +.IR http://karstenfestag.gmxhome.de . .PP There exists a different backend for Microtek scanners with SCSI-1 command set. -Refer to sane\-microtek(5) for details. +Refer to +.BR sane\-microtek (5) +for details. .PP And there is work in progress for the ScanMaker 3600. See -.B http://sourceforge.net/projects/sm3600 +.IR http://sourceforge.net/projects/sm3600 . .PP At present, the following scanners are known positively to work with this backend: @@ -53,7 +55,7 @@ Scanpaq SQ2030 Parport .ft R .PP Additional information can be found at -.BR http://www.sane\-project.org/ . +.IR http://www.sane\-project.org/ . .PP If you own a Microtek scanner other than the ones listed above, it may or may not work with SANE! Because equal scanners are sold under @@ -109,7 +111,9 @@ supported by the scanner in dependence of the scanning-mode and other options. Not supported options are disabled. .PP -The following options are supported by the Microtek2-driver: +The following options are supported by the +.B sane\-microtek2 +driver: .PP Color, grayscale, halftone and lineart scans. .PP @@ -299,15 +303,19 @@ If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 255 requests all debug output to be printed. Smaller levels reduce verbosity. To see error messages on stderr set -SANE_DEBUG_MICROTEK2 to 1 (Remark: The whole debugging levels should -be better revised). +.B SANE_DEBUG_MICROTEK2 +to 1 (Remark: The whole debugging levels should be better revised). .br E.g. just say: .br export SANE_DEBUG_MICROTEK2=128 + .SH "SEE ALSO" -sane\-scsi(5), sane(7) +.BR sane\-scsi(5) , +.BR sane (7) + .SH "AUTHORS" Bernd Schroeder (not active anymore) .br -Karsten Festag karsten.festag@gmx.de +Karsten Festag +.RI < karsten.festag@gmx.de >. -- cgit v1.2.3