From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-mustek.man | 407 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 407 insertions(+) create mode 100644 doc/sane-mustek.man (limited to 'doc/sane-mustek.man') diff --git a/doc/sane-mustek.man b/doc/sane-mustek.man new file mode 100644 index 0000000..536466f --- /dev/null +++ b/doc/sane-mustek.man @@ -0,0 +1,407 @@ +.TH sane\-mustek 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-mustek +.SH NAME +sane\-mustek \- SANE backend for Mustek SCSI flatbed scanners (and some other devices) +.SH DESCRIPTION +The +.B sane\-mustek +library implements a SANE (Scanner Access Now Easy) backend that provides access +to Mustek (and some relabeled Trust and Primax) SCSI and parport flatbed +scanners. At present, the following scanners are known to work more or less +with this backend: +.PP +.RS +Paragon MFS-6000CX +.br +Paragon MFS-12000CX +.br +Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP +.br +Paragon MFC-800S, 800 II SP +.br +Paragon MFS-6000SP +.br +Paragon MFS-8000SP +.br +Paragon MFS-1200SP, MFS-12000SP +.br +ScanExpress 6000SP +.br +ScanExpress 12000SP, 12000SP Plus, Paragon 1200 III SP, ScanMagic 9636S, 9636S Plus +.br +Paragon 1200 LS +.br +ScanExpress A3 SP +.br +Paragon 1200 SP Pro +.br +Paragon 1200 A3 Pro +.br +Paragon 600 II EP +.br +Paragon 600 II N +.br +Trust Imagery 1200 +.br +Trust Imagery 1200 SP +.br +Trust Imagery 4800 SP +.br +Trust SCSI Connect 19200 +.br +Primax Compact 4800 SCSI +.br +.RE +.PP +More details can be found on the Mustek SCSI backend homepage +.IR http://www.meier\-geinitz.de/sane/mustek\-backend/ . +.PP +Don't mix up MFS (Paragon), Pro and ScanExpress models! They're +completely different. Check the exact model name! +.PP +Note that most of the above scanners come with a SCSI interface. The only +non-SCSI scanners that have some support at this point is the 600 II N and 600 +II EP scanners. The former one comes with its own parallel port adapter (i.e., +it does +.I not +attach to the printer port). Both scanners use the SCSI protocol internally, +too. More info on how to use these parallel port scanners can be found below in +section +.BR "PARALLEL PORT SCANNERS" . +Other parallel port scanners are not supported by this backend but you may be +successful using the Mustek parallel port backend mustek_pp, see +.BR sane\-mustek_pp (5). +USB scanners are also not supported by this backend but the ma1509, mustek_usb, +gt68xx, and plustek backends include support for some of them, see +.BR sane\-ma1509 (5), +.BR sane\-mustek_usb (5), +.BR sane\-gt68xx "(5), and" +.BR sane\-plustek (5). +.PP +Mustek scanners have no protection against exceeding the physical scan +area height. That is, if a scan is attempted with a height that +exceeds the height of the scan surface, the scanner begins making loud +noises and the scan mechanism may be damaged. Thus, if you hear such +a noise, IMMEDIATELY turn off the scanner. This shouldn't happen if +your scanner is in the list of known scanners. There is more +information in the +.I @DOCDIR@/PROBLEMS +file. +.PP +If you own a Mustek (or Trust) scanner other than the ones listed +above that works with this backend, please let us know by sending the +scanner's exact model name (look at the front and back of the scanner) +and a debug output to +.IR sane\-devel@lists.alioth.debian.org . +You can get the debug output by setting the environment variable +.B SANE_DEBUG_MUSTEK +to 5 and showing the list of available scanners with scanimage \-L. Please +send all of it to the mailing list. You must be subscribed to sane\-devel +before you can send mail to the list. See +.I http://www.sane\-project.org/mailing\-lists.html +for details. + +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is either the path-name for the special device that corresponds to a +SCSI scanner or the port number at which the parallel port scanners can +be found (see section +.B "PARALLEL PORT SCANNERS" +below). For SCSI scanners, the special device name must be a generic SCSI +device or a symlink to such a device. The program +.I sane\-find\-scanner +helps to find out the correct device. Under Linux, such a device name +could be +.I /dev/sg0 +or +.IR /dev/sg3 , +for example. See +.BR sane\-scsi (5) +for details. +.SH CONFIGURATION +The contents of the +.I mustek.conf +file is a list of options and device names that correspond to Mustek +scanners. Empty lines and lines starting with a hash mark (#) are +ignored. See +.BR sane\-scsi (5) +on details of what constitutes a valid device name. +.PP +The supported options are +.BR linedistance\-fix , +.BR lineart\-fix , +.BR legal\-size , +.BR buffersize , +.BR blocksize , +.BR strip\-height , +.BR disable\-double\-buffering , +.BR disable\-backtracking , +and +.BR force\-wait . +.PP +Options come in two flavors: global and positional ones. Global +options apply to all devices managed by the backend whereas positional +options apply just to the most recently mentioned device. Note that +this means that the order in which the options appear matters! +.PP +Option +.B linedistance\-fix +is positional and works around a problem that occurs with some SCSI +controllers (notably the ncr810 controller under Linux). If color +scans have horizontal stripes and/or the colors are off, then it's +likely that your controller suffers from this problem. Turning on +this option usually fixes the problem. +.PP +Option +.B lineart\-fix +is positional and works around a timing problem that seems to exist +with certain MFS-12000SP scanners. The problem manifests itself in +dropped lines when scanning in lineart mode. Turning on this option +should fix the problem but may slow down scanning a bit. +.PP +Option +.B legal\-size +is positional and sets the size of the scan area to Legal format. Set this +option if you own a Paragon 12000 LS. It can't be distinguished by +software from a ScanExpress 12000 SP (ISO A4 format). +.PP +Option +.B buffersize +is a positional option that overrides the default value set for the size of +the SCSI buffer. The buffer size is specified in kilobytes. The default value +is 128. Because of double buffering the buffer actually sent to the scanner +is half the size of this value. Try to increase this value to achieve higher +scan speeds. Note that some ScanExpress scanners don't like buffer sizes above +64 kb (buffersize = 128). If your sg driver can't set SCSI buffer sizes at +runtime you may have to change that value, too. See sane\-scsi(5) for details. +.PP +Option +.B blocksize +is a positional option that overrides the default value set for the maximum +amount of data scanned in one block. The buffer size is specified in +kilobytes. Some scanners freeze if this value is bigger than 2048. The default +value is 1 GB (so effectively no limit) for most scanners. Don't change this +value if you don't know exactly what you do. +.PP +Option +.B strip\-height +is a global option that limits the maximum height of the strip scanned with a +single SCSI read command. The height is specified in inches and may contain a +fractional part (e.g., 1.5). Setting the strip\-height to a small value (one +inch, for example) reduces the likelihood of encountering problems with SCSI +driver timeouts and/or timeouts with other devices on the same SCSI bus. +Unfortunately, it also increases scan times. With current SCSI adapters and +drivers this option shouldn't be needed any more. +.PP +Option +.B disable\-double\-buffering +is a global option. If set, the backend will only send one buffer at a time to +the scanner. Try this option if you have trouble while scanning, e.g. SCSI +errors, freezes, or the first few cm are repeated over and over again in your +image. +.PP +Option +.B disable\-backtracking +is a positional option. If set, the scanner will not move back its slider +after each SCSI buffer is filled (`backtracking'). Setting this option will +lead to faster scans but may also produce horizontal stripes. This option +doesn't work with every scanner (only some of the paragon models can modify +backtracking). +.PP +Finally, +.B force\-wait +is a global option. If set, the backend will wait until the device is ready +before sending the inquiry command. Further more the backend will force the +scan slider to return to its starting position (not implemented for all +scanners). This option may be necessary with the 600 II N or when scanimage is +used multiple times (e.g. in scripts). The default is off (not set). +.PP +A sample configuration file is shown below: +.PP +.RS +# limit strip height of all scanners to 1.5 inches: +.br +option strip\-height 1.5 +.br +.br +/dev/scanner # first Mustek scanner +.br +# 1 MB buffer for /dev/scanner: +.br +option buffersize 1024 +.br +/dev/sge # second Mustek scanner +.br +# turn on fixes for /dev/sge: +.br +option lineart\-fix +.br +option linedistance\-fix +.RE + +.SH "SCSI ADAPTER TIPS" +.PP +You need a SCSI adapter for the SCSI scanners. Even if the connector is the +same as that of parallel port scanners, connecting it to the computers +parallel port will NOT work. +.PP +Mustek SCSI scanners are typically delivered with an ISA SCSI adapter. +Unfortunately, that adapter is not worth much since it is not +interrupt driven. It is (sometimes) possible to get the supplied card +to work, but without interrupt line, scanning will be very slow and put +so much load on the system, that it becomes almost unusable for other tasks. +.PP +If you already have a working SCSI controller in your system, you +should consider that Mustek scanners do not support the SCSI-2 +disconnect/reconnect protocol and hence tie up the SCSI bus while a +scan is in progress. This means that no other SCSI device on the same +bus can be accessed while a scan is in progress. +.PP +Because the Mustek-supplied adapter is not worth much and because +Mustek scanners do not support the SCSI-2 disconnect/reconnect +protocol, it is recommended to install a separate (cheap) SCSI +controller for Mustek scanners. For example, ncr810 based cards are +known to work fine and cost as little as fifty US dollars. +.PP +For Mustek scanners, it is typically necessary to configure the low-level SCSI +driver to disable synchronous transfers (sync negotiation), tagged command +queuing, and target disconnects. See +.BR sane\-scsi (5) +for driver- and platform-specific information. +.PP +The ScanExpress models have sometimes trouble with high resolution +color mode. If you encounter sporadic corrupted images (parts duplicated +or shifted horizontally) kill all other applications before scanning +and (if sufficient memory is available) disable swapping. +.PP +Details on how to get the Mustek SCSI adapters and other cards running can be +found at +.IR http://www.meier\-geinitz.de/sane/mustek\-backend/#SCSI . + +.SH "PARALLEL PORT SCANNERS" +This backend has support for the Paragon 600 II EP and Paragon 600 II N parallel +port scanners. Note that the latter scanner comes with its own ISA card that +implements a funky parallel port (in other words, the scanner does not connected +to the printer parallel port). +.PP +These scanners can be configured by listing the port number +of the adapter or the parallel port in the mustek.conf file. Valid port numbers +for the 600 II N are +.IR 0x26b ", " 0x2ab ", " 0x2eb ", " 0x22b ", " 0x32b ", " 0x36b ", " +.IR 0x3ab ", " 0x3eb . +For the 600 II EP use one of these: +.IR parport0 ", " parport1 ", " parport2 ", " 0x378 ", " 0x278 ", " 0x3bc . +Pick one that doesn't conflict with the other hardware in your computer. Put +only one number on a single line. Example: +.PP +.RS +.I 0x3eb +.RE +.PP +Note that for these scanners usually root privileges are required to access the +I/O ports. Thus, either make frontends such as +.BR scanimage (1) +and +.BR xscanimage (1) +setuid root (generally not recommended for safety reasons) or, alternatively, +access this backend through the network daemon +.BR saned (8). +.PP +If the Mustek backend blocks while sending the inquiry command to the scanner, +add the option +.B force\-wait +to +.IR mustek.conf . +.PP +Also note that after a while of no activity, some scanners themselves (not +the SANE backend) turns off their CCFL lamps. This shutdown is not always +perfect with the result that the lamp sometimes continues to glow +dimly at one end. This doesn't appear to be dangerous since as soon as +you use the scanner again, the lamp turns back on to the normal high +brightness. However, the first image scanned after such a shutdown may +have stripes and appear to be over-exposed. When this happens, just +take another scan, and the image will be fine. +.SH FILES +.TP +.I @CONFIGDIR@/mustek.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-mustek.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-mustek.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_MUSTEK +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. Higher +debug levels increase the verbosity of the output. + +.ft CR +.nf +Value Description +0 no output +1 print fatal errors +2 print important messages +3 print non-fatal errors and less important messages +4 print all but debugging messages +5 print everything +.fi +.ft R + +Example: +export SANE_DEBUG_MUSTEK=4 + +.SH "SEE ALSO" +.BR sane (7), +.BR sane\-find\-scanner (1), +.BR sane\-scsi (5), +.BR sane\-mustek_usb (5), +.BR sane\-gt68xx (5), +.BR sane\-plustek (5), +.BR sane\-mustek_pp (5) +.br +.I @DOCDIR@/mustek/mustek.CHANGES +.br +.I http://www.meier\-geinitz.de/sane/mustek\-backend/ + +.SH AUTHOR +David Mosberger, Andreas Czechanowski, Andreas Bolsch (SE extensions), +Henning Meier-Geinitz, James Perry (600 II EP). + +.SH BUGS +Scanning with the SCSI adapters supplied by Mustek is very slow at +high resolutions and wide scan areas. +.PP +Some scanners (e.g. Paragon 1200 A3 + Pro, SE A3) need more testing. +.PP +The gamma table supports only 256 colors, even if some scanners can do more. +.PP +More detailed bug information is available at the Mustek backend +homepage: +.IR http://www.meier\-geinitz.de/sane/mustek\-backend/ . -- cgit v1.2.3