From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-mustek_pp.man | 490 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 490 insertions(+) create mode 100644 doc/sane-mustek_pp.man (limited to 'doc/sane-mustek_pp.man') diff --git a/doc/sane-mustek_pp.man b/doc/sane-mustek_pp.man new file mode 100644 index 0000000..1316cf2 --- /dev/null +++ b/doc/sane-mustek_pp.man @@ -0,0 +1,490 @@ +.TH sane\-mustek_pp 5 "13 Jul 2008" +.de EX +.sp +.nf +.ft CW +.. +.de EE +.ft R +.fi +.sp +.. +.IX sane\-mustek_pp +.SH NAME +sane\-mustek_pp \- SANE backend for Mustek parallel port flatbed scanners +.SH DESCRIPTION +The +.B sane\-mustek_pp +library implements a SANE (Scanner Access Now Easy) backend that +provides access to Mustek parallel port flatbed scanners and OEM versions. + +There are 2 classes of Mustek parallel port scanners: regular +.B CCD +(cold cathode device) scanners and +.B CIS +(contact image sensor) scanners. +.P +The current version of this backend supports both CCD type scanners and +CIS type scanners. +.P +The following scanners might work with this backend: + +.SS "CCD scanners" + +.EX +Model: ASIC ID: CCD Type: works: +-------------------------------------------------------------- +SE 6000 P 1013 00 yes +SM 4800 P 1013/1015 04/01 yes +SE 1200 ED Plus 1015 01 no +SM 1200 ED Plus 1015 01 no +SE 12000 P 1505 05 no +600 III EP Plus 1013/1015 00/01 yes +SE 600 SEP 1013 ?? yes +600 II EP ???? ?? no +MD9848 1015 00 yes +Gallery 4800 ???? ?? yes +Viviscan Compact II 1013 00 yes +.EE +.SS CIS scanners +.EX +Model: ASIC ID: works: +----------------------------------------------- +Mustek 600 CP & 96 CP 1015 yes (*) +Mustek 1200 CP 1015 yes +Mustek 1200 CP+ 1015 yes +.EE + +.EX +OEM versions Original works +-------------------------------------------------- +Medion/LifeTec/Tevion + MD/LT 9350/9351 1200 CP yes + MD/LT 9850/9851 1200 CP maybe (**) + MD/LT 9858 1200 CP probably + MD/LT 9890/9891 1200 CP yes +Targa + Funline TS12EP 1200 CP yes + Funline TS6EP 600 CP yes +Trust + Easy Connect 9600+ 600 CP yes +Cybercom + 9352 1200 CP yes (***) +.EE +.HP +(*) Calibration problems existed with earlier version of +this driver. They seem to be solved now. +.HP +(**) Problems have been reported in the past for the +MD/LT9850 type (striped scans, head moving in wrong +direction at some resolutions). It is not known whether +the current version of the driver still has these problems. +.PP +.B IF YOU HEAR LOUD CLICKING NOISES, IMMEDIATELY UNPLUG THE SCANNER ! +(This holds for any type of scanner). +.HP +(***) Possibly, the engine_delay parameter has to be set to 1 ms +for accurate engine movements. +.PP +Please note that this backend is still under construction. Certain models +are currently not supported and some may never be because the communication +protocol is still unknown (eg., SE 12000 P). +.PP +Some scanners work faster when +.B EPP/ECP +is enabled in the BIOS. EPP mode however may lead to hard-locks on some Linux +systems. If that is the case for you, you can either disable ECP/EPP in your +BIOS or disable it in the backend itself (see GLOBAL OPTIONS). +.PP +Note that the backend needs to run as root or has to have appropriate access +rights to /dev/parport* if libieee1284 support is compiled in. To allow user +access to the scanner run the backend through the network interface (See +saned(8) and sane\-net(5)). Note also that the backend +.I does not +support +.IR "parport sharing" , +i.e. if you try printing while scanning, your computer may crash. To enable +parport sharing, you have to enable libieee1284 at compile time. This backend +also conflicts with the +.I sane\-musteka4s2 +backend. You can only enable one of them in your dll.conf. However, you have +to enable the backend explicitly in your dll.conf, just remove the hash mark +in the line "mustek_pp". + +.SH "DEVICE DEFINITION" +This backend allows multiple devices being defined and configured via the +.B mustek_pp.conf +file (even simultaneously, provided that they are connected to different +parallel ports). Please make sure to edit this file +.B before +you use the backend. +.PP +A device can be defined as follows: +.PP +.RS +.I scanner +.RE +.PP +where +.HP +.B +is an arbitrary name for the device, optionally enclosed by double quotes, +for instance "LifeTec 9350". +.HP +.B +is the name of the parallel port to which the device is connected. In case +libieee1284 is used for communication with the port +.I (default +.IR setup) , +valid port names are +.BR parport0 , +.BR parport1 , +and +.BR parport2 . +.PP +In case the backend is configured for raw IO +.I (old +.IR setup) , +port addresses have to be used instead of port names: +.BR 0x378 , +.BR 0x278 , +or +.BR 0x3BC . +The mapping of parallel ports (lp0, lp1, and lp2) to these addresses +can be different for different Linux kernel versions. For instance, +if you are using a Kernel 2.2.x or better and you have only one +parallel port, this port is named lp0 regardless of the base address. However, +this backend requires the base address of your port. If you are not sure which +port your scanner is connected to, have a look at your /etc/conf.modules, +/etc/modules.conf and/or /proc/ioports. +.PP +If you are unsure which port to use, you can use the magic value +.BR * +to probe for your scanner. +.PP +.HP +.B +is the driver to use for this device. Currently available drivers are: +.IP +.BR cis600 " : for 600 CP, 96 CP & OEM versions" +.br +.BR cis1200 " : for 1200 CP & OEM versions" +.br +.BR cis1200+ " : for 1200 CP+ & OEM versions" +.br +.BR ccd300 " : for 600 IIIE P & OEM version" +.IP +.B Choosing the wrong driver can damage your scanner! +.br +Especially, using the 1200CP settings on a 600CP can be +harmful. If the scanner starts making a loud noise, turn +it off immediately !!! +.PP +Using the cis600 driver on a 1200CP or a 1200CP+ is probably not +dangerous. The cis1200+ driver also works for the 1200CP, and using +the cis1200 driver on a 1200CP+ will typically result in scans that +cover only half of the width of the scan area (also not dangerous). +.PP +If unsure about the exact model of your OEM version, check the optical +resolution in the manual or on the box: the 600CP has a maximum optical +resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum +optical resolution of 600x1200 DPI. +.PP +Examples: +.PP +.RS +scanner "LifeTec 9350" 0x378 cis1200 +.PP +scanner Mustek_600CP 0x378 cis600 +.PP +scanner Mustek_600IIIEP * ccd300 +.RE + +If in doubt which port you have to use, or whether your scanner is +detected at all, you can use +.B sane\-find\-scanner \-p +to probe all configured ports. + +.SH CONFIGURATION +.PP +The contents of the +.B mustek_pp.conf +file is a list of device definitions and device options that correspond to +Mustek scanners. Empty lines and lines starting with a hash mark (#) are +ignored. Options have the following format: +.PP +.RS +.I option [] +.RE +.PP +Depending on the nature of the option, a value may or may not be present. +Options always apply to the scanner definition that precedes them. There +are no global options. Options are also driver-specific: not all drivers +support all possible options. + +.SS Common options +.TP +.B bw +Black/white discrimination value to be used during lineart scanning. Pixel +values below this value are assumed to be black, values above are +assumed to be white. +.br +Default value: 127 +.br +Minimum: 0 +.br +Maximum: 255 +.sp +Example: option bw 150 + +.SS CIS driver options +.TP +.B top_adjust +Vertical adjustment of the origin, expressed in millimeter (floating point). +This option can be used to calibrate the position of the origin, within +certain limits. Note that CIS scanners are probably temperature sensitive, and +that a certain inaccuracy may be hard to avoid. Differences in offset between +runs in the order of 1 to 2 mm are not unusual. +.br +Default value: 0.0 +.br +Minimum: \-5.0 +.br +Maximum: 5.0 +.br +.sp +Example: option top_adjust \-2.5 +.TP +.B slow_skip +Turns fast skipping to the start of the scan region off. When the region to +scan does not start at the origin, the driver will try to move the scanhead +to the start of the scan area at the fastest possible speed. On some models, +this may not work, resulting in large inaccuracies (up to centimeters). +By setting this option, the driver is forced to use normal speed during +skipping, which can circumvent the accuracy problems. Currently, there are +no models for which these inaccuracy problems are known to occur. +.sp +By default, fast skipping is used. +.sp +Example: option slow_skip +.TP +.B engine_delay +Under normal circumstances, it is sufficient for the driver to wait for the +scanner signaling that the engine is stable, before a new engine command can +be transmitted. In rare cases, certain scanners and/or parallel port chipsets +appear to prevent reliable detection of the engine state. As a result, engine +commands are transmitted too soon and the movement of the scanner head becomes +unreliable. Inaccuracies ranging up to 10 cm over the whole vertical scan +range have been reported. To work around this problem, the engine_delay option +can be set. If it is set, the driver waits an additional amount of time after +every engine command, equal to the engine_delay parameter, expressed in +milliseconds. It practice an engine_delay of 1 ms is usually sufficient. The +maximum delay is 100 ms. +.sp +Note that every additional ms of delay can add up to 14 seconds to the total +scanning time (highest resolution), so an as small as possible value is +preferred. +.sp +Default value: 0 +.br +Minimum: 0 +.br +Maximum: 100 +.sp +Example: option engine_delay 1 + +.SS CCD driver options +.TP +.B top +Number of scanlines to skip to the start of the scan area. The number can +be any positive integer. Values known to me are 47 and 56. +.sp +Default value: 47 +.br +Minimum: 0 +.br +Maximum: none +.br +.sp +Example: option top 56 +.TP +.B waitbank +The number of usecs to wait for a bank change. You should not touch this +value actually. May be any positive integer +.sp +Default value: 700 +.br +Minimum: 0 +.br +Maximum: none +.sp +Example: option waitbank 700 +.PP +A sample configuration file is shown below: +.PP +.EX +# +# LifeTec/Medion 9350 on port 0x378 +# +scanner "LifeTec 9350" 0x378 cis1200 + +# Some calibration options (examples!). +option bw 127 +option top_skip \-0.8 + +# +# A Mustek 600CP on port 0x3BC +# +scanner "Mustek 600CP" 0x3BC cis600 + +# Some calibration options (examples!). +option bw 120 +option top_skip 1.2 + +# +# A Mustek 1200CP+ on port 0x278 +# +scanner "Mustek 1200CP plus" 0x278 cis1200+ + +# Some calibration options (examples!). +option bw 130 +option top_skip 0.2 + +# +# A Mustek 600 III EPP on port parport0 +# +scanner "Mustek 600 III EPP" parport0 ccd300 + +# Some calibration options (examples!). +option bw 130 +option top 56 +.EE + +.SH GLOBAL OPTIONS +.PP +You can control the overall behaviour of the mustek_pp backend by global +options which precede any scanner definition in the mustek_pp.conf file. +.sp +Currently, there is only one global option: + +.SS Global options +.TP +.B no_epp +Disable parallel port mode EPP: works around a known bug in the Linux parport +code. Enable this option, if the backend hangs when trying to access the +parallel port in EPP mode. +.sp +Default value: use EPP +.sp +Example: option no_epp + +.SH FILES +.TP +.I @CONFIGDIR@/mustek_pp.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-mustek_pp.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-mustek_pp.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_MUSTEK_PP +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller +levels reduce verbosity. +.EX +level debug output +-------------------------------------- + 0 nothing + 1 errors + 2 warnings & minor errors + 3 additional information + 4 debug information + 5 code flow (not supported yet) + 6 special debug information +.EE +.TP +.B SANE_DEBUG_SANEI_PA4S2 +This variable sets the debug level for the SANE interface for the Mustek +chipset A4S2. Note that enabling this will spam your terminal with some +million lines of debug output. +.EX +level debug output +---------------------------- + 0 nothing + 1 errors + 2 warnings + 3 things nice to know + 4 code flow + 5 detailed code flow + 6 everything +.EE + +.SH "SEE ALSO" +sane(7), sane\-mustek(5), sane\-net(5), saned(8), sane\-find\-scanner(1) + +.TP +For latest bug fixes and information see +.I http://www.penguin\-breeder.org/sane/mustek_pp/ + +.TP +For additional information on the CIS driver, see +.I http://home.scarlet.be/eddy_de_greef/ + +.SH AUTHORS +.nf +Jochen Eisinger +Eddy De Greef +.fi + +.SH BUGS +Too many... please send bug reports to +.I sane\-devel@lists.alioth.debian.org +(note that you have to subscribe first to the list before you can send +emails... see http://www.sane\-project.org/mailing\-lists.html) + +.SH BUG REPORTS +If something doesn't work, please contact us (Jochen for the CCD scanners, +Eddy for the CIS scanners). But we need some information about +your scanner to be able to help you... + +.TP +.I SANE version +run "scanimage \-V" to determine this +.TP +.I the backend version and your scanner hardware +run "SANE_DEBUG_MUSTEK_PP=128 scanimage \-L" as root. If you don't get any output +from the mustek_pp backend, make sure a line "mustek_pp" is included into +your @CONFIGDIR@/dll.conf. +If your scanner isn't detected, make sure you've defined the right port address +in your mustek_pp.conf. +.TP +.I the name of your scanner/vendor +also a worthy information. Please also include the optical resolution and lamp type of your scanner, both can be found in the manual of your scanner. +.TP +.I any further comments +if you have comments about the documentation (what could be done better), or you +think I should know something, please include it. +.TP +.I some nice greetings -- cgit v1.2.3