From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-ricoh.man | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 doc/sane-ricoh.man (limited to 'doc/sane-ricoh.man') diff --git a/doc/sane-ricoh.man b/doc/sane-ricoh.man new file mode 100644 index 0000000..8cb38a2 --- /dev/null +++ b/doc/sane-ricoh.man @@ -0,0 +1,79 @@ +.TH sane\-ricoh 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-ricoh +.SH NAME +sane\-ricoh \- SANE backend for Ricoh flatbed scanners +.SH DESCRIPTION +The +.B sane\-ricoh +library implements a SANE (Scanner Access Now Easy) backend that +provides access to the following Ricoh flatbed scanners: +.PP +.RS +IS50 +.br +IS60 +.br +.RE +.PP +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is the path-name for the special device that corresponds to a +SCSI scanner. The special device name must be a generic SCSI device or a +symlink to such a device. The program +.IR sane\-find\-scanner +helps to find out the correct device. Under Linux, such a device name +could be +.I /dev/sga +or +.IR /dev/sge , +for example. See sane\-scsi(5) for details. + +.SH FILES +.TP +.I @CONFIGDIR@/ricoh.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-ricoh.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-ricoh.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_RICOH +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. Higher +debug levels increase the verbosity of the output. + +Example: +export SANE_DEBUG_RICOH=4 + +.SH "SEE ALSO" +sane(7), sane\-scsi(5) +.SH AUTHOR +Feico W. Dillema + -- cgit v1.2.3