From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-test.man | 324 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 324 insertions(+) create mode 100644 doc/sane-test.man (limited to 'doc/sane-test.man') diff --git a/doc/sane-test.man b/doc/sane-test.man new file mode 100644 index 0000000..41b9aa4 --- /dev/null +++ b/doc/sane-test.man @@ -0,0 +1,324 @@ +.TH sane\-test 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-test +.SH NAME +sane\-test \- SANE backend for testing frontends +.SH DESCRIPTION +The +.B sane\-test +library implements a SANE (Scanner Access Now Easy) backend that allows +testing the SANE installation and SANE frontends. It provides access to a +(nearly) unlimited number of virtual devices. There is no support for real +scanners or cameras. However, the backend simulates scanning and setting +options. +.PP +The idea is not only to find bugs in frontends but also to show all +capabilities of SANE. Therefore +.B sane\-test +implements functions and options that are not (or seldom) found in other +backends. +.PP +The backend is commented out in @CONFIGDIR@/dll.conf, so either the comment +character must be removed or the backend must be called explicitly. E.g. +`scanimage \-d test' or `xscanimage test'. + +.SH SCAN MODE OPTIONS +Option +.B mode +selects the scan mode (Gray or Color). +.PP +Option +.B depth +determines the number of bits per sample (1. 8, or 16). Keep in mind, that +this value refers to the sample, not the pixel. So depth=16 results in 48 +bits per pixel in color mode. The most usual combinations are mode=Gray, +depth=1 for lineart, mode=Gray, depth=8 for gray and mode=Color, depth=8 for +color mode. The combination of color and 1-bit mode is quite obscure (8 +colors) but allowed in the SANE standard. However, the meaning of bits is not +defined. Currently 1 = high intensity and 0 = low intensity is used. +.PP +Setting option +.B hand\-scanner +results in the test-backend behaving like a hand-scanner. Hand-scanners do +not know the image height a priori. Instead, they return a height of \-1. +Setting this option allows to test whether a frontend can handle this +correctly. This option also enables a fixed width of 11 cm. +.PP +Setting option +.B three\-pass +simulates a three-pass scanner. Older color scanners needed to scan the image +once per color (reg/green/blue) to get the full image. Therefore, in this mode +three single frames are transmitted in color mode. +.PP +Option +.B three\-pass\-order +provides support for changing the order of the three frames (see option +three-pass above). A frontend should support all orders. +.PP +Option +.B resolution +sets the resolution of the image in dots per inch. +.PP +.PP +Option +.B source +can be used to simulate an Automatic Document Feeder (ADF). After 10 scans, the +ADF will be "empty". +.PP + +.SH SPECIAL OPTIONS +Option +.B test\-picture +allows to set the image that's returned to the frontend. While "Solid white" +and "Solid black" are quite obvious, the other options need some more +explanation. Color patterns are used to determine if all modes and their +colors are represented correctly by the frontend. The grid should look like the +same in every mode and resolution. A table of all the test pictures can be +found at: http://www.meier\-geinitz.de/sane/test\-backend/test\-pictures.html. +.PP +If option +.B invert\-endianess +is set, the upper and lower bytes of image data in 16 bit modes are exchanged. +This option can be used to test the 16 bit modes of frontends, e.g. if the +frontend uses the correct endianess. +.PP +If option +.B read\-limit +is set, the maximum amount of data transferred with each call to sane_read() is +limited. +.PP +Option +.B read\-limit\-size +sets the limit for option read-limit. A low limit slows down scanning. It +can be used to detect errors in frontend that occur because of wrong +assumptions on the size of the buffer or timing problems. +.PP +Option +.B read\-delay +enables delaying data to the frontend. +.PP +Option +.B read\-delay\-duration +selects the number of microseconds the backends waits after each transfer of a +buffer. This option is useful to find timing-related bugs, especially if +used over the network. +.PP +If option +.B read\-return\-value +is different from "Default", the selected status will be returned by every +call to sane_read(). This is useful to test the frontend's handling of the +SANE statuses. +.PP +If option +.B ppl\-loss +is different from 0, it determines the number of pixels that are "lost" at the +end of each line. That means, lines are padded with unused data. +.PP +Option +.B fuzzy\-parameters +selects that fuzzy (inexact) parameters are returned as long as the scan +hasn't been started. This option can be used to test if the frontend uses the +parameters it got before the start of the scan (which it shouldn't). +.PP +Option +.B non\-blocking +determines if non-blocking IO for sane_read() should be used if supported by +the frontend. +.PP +If option +.B select\-fd +is set, the backend offers a select filedescriptor for detecting if +sane_read() will return data. +.PP +If option +.B enable\-test\-options +is set, a fairly big list of options for testing the various SANE option +types is enabled. +.PP +Option +.B print\-options +can be used to print a list of all options to standard error. +.PP + +.SH GEOMETRY OPTIONS +Option +.B tl\-x +determines the top-left x position of the scan area. +.PP +Option +.B tl\-y +determines the top-left y position of the scan area. +.PP +Option +.B br\-x +determines the bottom-right x position of the scan area. +.PP +Option +.B br\-y +determines the bottom-right y position of the scan area. +.PP + +.SH BOOL TEST OPTIONS +There are 6 bool test options in total. Each option is numbered. (3/6) +means: this is option 3 of 6. The numbering scheme is intended for easier +detection of options not displayed by the frontend (because of missing support +or bugs). +.PP +Option +.B bool\-soft\-select\-soft\-detect +(1/6) is a bool test option that has soft select and soft detect (and +advanced) capabilities. That's just a normal bool option. +.PP +Option +.B bool\-hard\-select\-soft\-detect +(2/6) is a bool test option that has hard select and soft detect (and +advanced) capabilities. That means the option can't be set by the frontend +but by the user (e.g. by pressing a button at the device). +.PP +Option +.B bool\-hard\-select +(3/6) is a bool test option that has hard select (and advanced) capabilities. +That means the option can't be set by the frontend but by the user (e.g. by +pressing a button at the device) and can't be read by the frontend. +.PP +Option +.B bool\-soft\-detect +(4/6) is a bool test option that has soft detect (and advanced) +capabilities. That means the option is read-only. +.PP +Option +.B bool\-soft\-select\-soft\-detect\-emulated +(5/6) is a Bool test option that has soft select, soft detect, and emulated +(and advanced) capabilities. +.PP +Option +.B bool\-soft\-select\-soft\-detect\-auto +(6/6) is a Bool test option that has soft select, soft detect, and automatic +(and advanced) capabilities. This option can be automatically set by the +backend. +.PP + +.SH INT TEST OPTIONS +There are 6 int test options in total. +.PP +Option +.B int +(1/6) is an int test option with no unit and no constraint set. +.PP +Option +.B int\-constraint\-range +(2/6) is an int test option with unit pixel and constraint range set. Minimum +is 4, maximum 192, and quant is 2. +.PP +Option +.B int\-constraint\-word\-list +(3/6) is an int test option with unit bits and constraint word list set. +.PP +Option +.B int\-constraint\-array +(4/6) is an int test option with unit mm and using an array without +constraints. +.PP +Option +.B int\-constraint\-array\-constraint\-range +(5/6) is an int test option with unit mm and using an array with a range +constraint. Minimum is 4, maximum 192, and quant is 2. +.PP +Option +.B int\-constraint\-array\-constraint\-word\-list +(6/6) is an int test option with unit percent and using an array a word list +constraint. + +.SH FIXED TEST OPTIONS +There are 3 fixed test options in total. +.PP +Option +.B fixed +(1/3) is a fixed test option with no unit and no constraint set. +.PP +Option +.B fixed\-constraint\-range +(2/3) is a fixed test option with unit microsecond and constraint range +set. Minimum is \-42.17, maximum 32767.9999, and quant is 2.0. +.PP +Option +.B fixed\-constraint\-word\-list +(3/3) is a Fixed test option with no unit and constraint word list set. +.PP + +.SH STRING TEST OPTIONS +There are 3 string test options in total. +.PP +Option +.B string +(1/3) is a string test option without constraint. +.PP +Option +.B string\-constraint\-string\-list +(2/3) is a string test option with string list constraint. +.PP +Option +.B string\-constraint\-long\-string\-list +(3/3) is a string test option with string list constraint. Contains some more +entries... +.PP + +.SH BUTTON TEST OPTION +Option +.B button +(1/1) is a Button test option. Prints some text... +.PP + +.SH FILES +.TP +.I @CONFIGDIR@/test.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). The initial values of most of the basic SANE options can be configured +in this file. A template containing all the default values is provided +together with this backend. One of the more interesting values may be +.BR number_of_devices . +It can be used to check the frontend's ability to show a long list of devices. +The config values concerning resolution and geometry can be useful to test +the handling of big file sizes. + +.TP +.I @LIBDIR@/libsane\-test.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-test.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_TEST +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. Higher +debug levels increase the verbosity of the output. + +Example: +export SANE_DEBUG_TEST=4 + +.SH "SEE ALSO" +sane(7), +.IR http://www.meier\-geinitz.de/sane/test\-backend/ + + +.SH AUTHOR +Henning Meier-Geinitz + +.SH BUGS +\- config file values aren't tested for correctness -- cgit v1.2.3