****** Release of sane-backends 1.0.17. End of code freeze ****** 2005-12-18 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added link to Lexmark X6170. * doc/descriptions/gt68xx.desc: Added Trust Direct WebScan 19200 (reported on sane-devel). * backend/Makefile.in: Added missing genesys_conv.c and genesys_conv_hlp.c to DISTFILES. Without this change the files wouldn't be part of the archive. * configure configure.in: Disabled compilation warnings. Increased version number. 2005-12-17 Karl Heinz Kremer * doc/descriptions/epson.desc: Added a few new scanners based on messages to the sane-devel mailing list. 2005-12-11 Henning Meier-Geinitz * NEWS: Updated for release. ---- CODE FREEZE FOR SANE 1.0.17 --- 2005-12-10 Henning Meier-Geinitz * doc/descriptions-external/hp3500.desc: Added .desc file for new external backend hp3500 which provides support for the HP ScanJet 3500 series (from Troy Rollo ). * doc/descriptions/unsupported.desc: Removed HP 3500, 3530, and 3570 (now in hp3500.desc). 2005-12-09 Henning Meier-Geinitz * doc/descriptions-external/brother-mfc4600.desc: Added .desc file for (older) external backend for Brother MFC 4600 (USB version). * doc/descriptions/unsupported.desc: Added Lexmark X6170. Removed Brother MFC 4600 USB. * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c backend/gt68xx_low.c doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Silenced non-fatal warnings/error messages. Several fixes for avoiding freezes/timeouts after cancelling a scan. Several fixes for warming up of lamp. Decreased scan width of Plustek OpticPro 1248U. 2005-12-08 Gerhard Jaeger * backend/plustek-pp_tpa.c backend/u12-tpa.c: Fixed nasty compiler warnings. 2005-12-07 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Brother MFC-7300c. Removed Primax Colorado 2400U (now in primascan.desc). * doc/descriptions-external/primascan.desc: New external backend for Primax Colorado 2400U. 2005-12-07 Gerhard Jaeger * sanei/sanei_acces.c: Fixed problem, when the device name contains one or more path-separators. These characters are now converted. The problem occurs on 2.4 based installations as well as on OpenBSD. 2005-12-06 Stephane Voltz * backend/genesys_gl646.c: removed forgotten left-over of an experiment . 2005-12-06 Stephane Voltz * backend/genesys_gl646.c: added AF init in powersave, fixed long-standing bug related to a data read timeout between distinct scanning sessions 2005-12-06 Henning Meier-Geinitz * backend/genesys.conf: Enabled Canon LiDE 60 which was disabled for safety reasons. Bugs are fixed now. * doc/descriptions/genesys.desc: Changed status of Canon LiDE 50 and 60 to "good". Added comment for untested LiDE 40 to report any success/failure. * AUTHORS: Marked Fred Odendaal as active maintainer. * tools/hotplug/libsane.usermap: Added Epson Perfection 3490. 2005-12-05 Rene Rebe * backend/avision.c backend/avision.conf doc/sane-avision.man: fixed more typos in comments and debug output, removed obsolete options from the parser, example avision.conf and manual page. Fixed 12 Bit gray and color modes to actually work as well as software CCD line-difference correction. Minimal scan resolutions have been slightly adapted for some ASICs. 2005-12-05 Pierre Willenbrock * backend/genesys.c: removed usage of current_setup in functions where it is not necessarily initialized. Modified shading calibration to not use fixed stripe sizes. Fixed memory corruption while calculating shading data. Fixed read sizes to be multiples of 256. Fixed stagger/line distance correction. Fixed line shrinking to correctly update data buffers. Bumped BUILD number. * backend/genesys.c backend/genesys_conv.c: Added gray to lineart conversion. * backend/genesys.c backend/genesys_conv_hlp.c: Modified calling parameters to stagger/line distance correction filter to better describe its inner working. * backend/genesys_devices.c: Slowed down motor timings for LiDE 35/40/50/60. Removed untested message for LiDE 35/40/50/60. * backend/genesys_gl646.c: Fixed bug for odd pixel count. Added support for gray to lineart conversion. * backend/genesys_gl841.c: Fixed words_per_line calculation. Added support for gray to lineart conversion(not used). Fixed problem with scanners not backtracking while scanning calibration area leading to scanning part of document area. 2005-12-05 Oliver Schwartz * backend/snapscan.c backend/snapscan-scsi.c: small bugfix for Benq5150 2005-12-05 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Canon PIXMA MP170. 2005-12-04 Rene Rebe * backend/avision.c backend/avision.h: updated the Avision backend from BUILD 167 to 179, including support for HP 5370, AV600U, AV210C2, AV220C2, et. al. The USB i/o paths got hardened, and a lot of fixes as well es enhancements and optimizations where added and a lot of typos, mostly in debug output and comments, got fixed. The "Line Art" mode was renamed to "Lineart" to match the other backends. 2005-12-03 Karl Heinz Kremer * backend/epson_usb.c: Added id for CX4200 2005-12-04 Oliver Schwartz * backend/snapscan.h backend/snapscan.c backend/snapscan-scsi.c backend/snapscan-options.c: Some fixes for Benq 5150 2005-12-03 Peter Fales * backend/gphoto2.c: Cosmetic changes to debug messages 2005-12-02 Oliver Schwartz * backend/snapscan-sources.c: Another fix for lineart mode for the Epson 3490 @ 3200 DPI - this time tested * backend/snapscan.c: Change version number to 1.4.50 2005-12-01 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added link for Corex Cardscan 500. 2005-11-30 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added UMAX Astra 4100. * tools/hotplug/libsane.usermap: Added Epson Stylus CX4200. 2005-11-28 Jochen Eisinger * sanei/sanei_pa4s2.c: incorrect test of a bit mask. 2005-11-28 Stephane Voltz * backend/umax_pp_low.c: ifdef'ed forgottent debug statements 2005-11-28 Stephane Voltz * backend/umax_pp_low.c: fixed 'blue tint' on scanning area border by increasing shading coefficient on dark areas 2005-11-26 Oliver Schwartz * backend/snapscan-sources.c: Fix lineart mode for Epson 3490 * doc/descriptions/snapscan.desc: Update status for Benq 5000 2005-11-26 Oliver Schwartz * backend/snapscan-scsi.c: Fix for Benq 5000 * backend/snapscan.conf: Replace esfw52.bin with dummy filename entry 2005-11-25 Mattias Ellert * backend/artec_eplus48u.conf, backend/snapscan.conf: Use default firmware dirs in config files * doc/sane-artec_eplus48u.man, doc/sane-snapscan.man: Use default firmare dirs in man pages 2005-11-25 Ulrich Deiters * backend/canon-sane: fixed usage of an uninitialized variable 2005-11-25 Henning Meier-Geinitz * po/sane-backends.da.po: Updated Danish translation (from Mogens Jaeger ). 2005-11-25 Oliver Schwartz * backend/snapscan-sources.c: Fix for grayscale / linart for Epson 3490 at 3200 DPI 2005-11-25 Mattias Ellert * po/sane-backends.ru.po: Fixing some fuzzies 2005-11-24 Mattias Ellert * doc/gamma4scanimage.man, doc/sane-abaton.man, doc/sane-agfafocus.man, doc/sane-apple.man, doc/sane-artec.man, doc/sane-avision.man, doc/sane-bh.man, doc/sane-canon.man, doc/sane-canon630u.man, doc/sane-config.man, doc/sane-coolscan.man, doc/sane-coolscan2.man, doc/sane-dc210.man, doc/sane-dc240.man, doc/sane-dc25.man, doc/sane-dmc.man, doc/sane-epson.man, doc/sane-find-scanner.man, doc/sane-fujitsu.man, doc/sane-genesys.man, doc/sane-gphoto2.man, doc/sane-gt68xx.man, doc/sane-hp.man, doc/sane-hp4200.man, doc/sane-hp5400.man, doc/sane-ibm.man, doc/sane-leo.man, doc/sane-lexmark.man, doc/sane-ma1509.man, doc/sane-matsushita.man, doc/sane-microtek.man, doc/sane-microtek2.man, doc/sane-mustek.man, doc/sane-mustek_pp.man, doc/sane-mustek_usb2.man, doc/sane-nec.man, doc/sane-net.man, doc/sane-niash.man, doc/sane-pint.man, doc/sane-plustek.man, doc/sane-plustek_pp.man, doc/sane-ricoh.man, doc/sane-s9036.man, doc/sane-sceptre.man, doc/sane-sharp.man, doc/sane-snapscan.man, doc/sane-sp15c.man, doc/sane-st400.man, doc/sane-tamarack.man, doc/sane-teco1.man, doc/sane-teco2.man, doc/sane-teco3.man, doc/sane-u12.man, doc/sane-umax1220u.man, doc/sane-umax_pp.man, doc/sane-usb.man, doc/sane-v4l.man, doc/sane.man, doc/saned.man, doc/scanimage.man: man page fixes 2005-11-23 Oliver Schwartz * backend/snapscan-options.c: Disable bilevel colour / halftoning for Epson 3490 2005-11-23 Mattias Ellert * backend/Makefile.in: added "artec_eplus48u" to FIRMWARE_DIRS 2005-11-22 Mattias Ellert * po/sane-backends.sv.po: Updated Swedish translation * sanei/sanei_scsi.c: Added some debugging. Fixed some varnings ---- FEATURE FREEZE FOR SANE 1.0.17 --- 2005-11-20 Henning Meier-Geinitz * backend/genesys.c backend/genesys_devices.c backend/genesys.conf: Bumped build number. Changed scanner's name to Canon LiDE 35/40/50. Added Canon LiDE LiDE 60. This scanner is still commented out in genesys.conf. Removed comment sign for Canon LiDE 35/40/50 in genesys.conf. * doc/descriptions/genesys.desc: Added Canon LiDE 35, 40, 50, 60. * doc/sane-genesys.man: Updated concerning gl841 scanners. * doc/descriptions/unsupported.desc: Moved Canon LiDE 35/40/50/60 to genesys.desc. Added Canon Pixma MP150, Tevion MD 90070 and Primax Colorado 1200p. * tools/hotplug/libsane.usermap: Added Plustek Opticslim 2400 ids (from Jan Matousek). * NEWS: Updated. 2005-11-19 Pierre Willenbrock * backend/genesys_gl841.c backend/genesys_devices.c: Added support for Canon LiDE 35/40/50 * backend/genesys.c backend/genesys_low.h backend/genesys_gl646.c: Reworked data conversion process to convert CIS data, added new slope generation variant * backend/genesys_conv.c backend/genesys_conv_hlp.c: Moved conversion filter functions out of backend/genesys.c 2005-11-18 Oliver Schwartz * backend/snapscan-options.c: Disable 2400 DPI for Epson 3490, use 1600 DPI instead 2005-11-17 Gerhard Jaeger * doc/plustek/Plustek-PARPORT.changes: Update. * backend/plustek_pp.c backend/plustek-pp.h backend/plustek-pp_ptdrv.c backend/plustek-pp_wrapper.c: Fixed sizeof(long) issue for 64bit platforms, see bugreport #302195. * backend/plustek_pp.conf: Default config now only tries to access parport using libieee1284. 2005-11-15 Oliver Schwartz * backend/snapscan.c backend/snapscan-options.c backend/snapscan-scsi.c: Enabled quality calibration for the Epson 3490 * doc/descriptions/snapscan.desc: Changed status for Epson Perfection 3490 (good) and 3590 (basic) 2005-11-15 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added HP Scanjet 4890. Added several Optrox scanners. * doc/descriptions-external/brother.desc: Marked status of MFC-9880 as "unsupported" based on a user's report. 2005-11-13 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added IOmagic MobileScan USB. Mentioned chips used in the Artec AM12E+. * doc/descriptions-external/hp3770.desc doc/descriptions-external/hp8200.desc: Added clarification concerning status of these backends. 2005-11-10 Oliver Schwartz * backend/snapscan.c backend/snapscan-sources.c: Added deinterlacing for Epson 3490 * backend/Makefile.in: added "snapscan" to FIRMWARE_DIRS 2005-11-07 m. allan noah * backend/fujitsu.c: M3091/2 lie about gamma dl capability 2005-11-07 Henning Meier-Geinitz * doc/descriptions/microtek2.desc: Fixed "unmaintained" marker. Added Microtek Scanmaker V6UPL (bug #302464). * tools/check-usb-chip.c: Added detection of rts8822l-01h chipset (patch from Jonathan Bravo Lopez ). 2005-11-06 Henning Meier-Geinitz * doc/descriptions-external/epkowa.desc: Disabled man page link (points to nowhere). Bug #302463. * doc/descriptions/unsupported.desc: Added Canon PIXMA MP130. * doc/sane-hp.man doc/sane-microtek2.man: Fixed links to ppscsi. 2005-11-02 Oliver Schwartz * sanei/sanei_usb.c: Fixed output of transfer buffer for usb_read_bulk in OS/2. * backend/snapscan.c backend/snapscan-scsi.c: Fixes for Benq 5000 * backend/snapscan-usb.c: Avoid recursive calls of usb_sense_handler 2005-11-01 Henning Meier-Geinitz * sanei/sanei_usb.c: Added support for detecting vendor and product id with FreeBSD kernel scanner driver (based on patch in FreeBSD ports). * README.freebsd: Updated information about USB scanners. 2005-10-31 Oliver Schwartz * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h backend/snapscan-options.c doc/descriptions/snapscan.desc: Distinguish between 5000/5000E/5000U * backend/snapscan-sources.c: Enable deinterlacer for 5000E/5000U for 1200 DPI * backend/snapscan.conf: Fix names for 5000/5000E/5000U 2005-10-30 Giuseppe Sacco * po/*it.po: Updated italian translation 2005-10-29 Henning Meier-Geinitz * backend/artec_eplus48u.conf doc/descriptions/artec_eplus48u.desc: Added support for Trust 240H Easy Webscan Gold to artec_eplus48u backend. * Makefile.in acinclude.m4 configure configure.in backend/Makefile.in frontend/Makefile.in lib/Makefile.in sanei/Makefile.in tools/Makefile.in: Run "makedepend" if it's available. This way "make" builds backends correctly even if only included files (e.g. headers) are changed. Don't be too verbose when running makedepend. Create links libsane-*.so.1 to the real library files if the links are not there. This fixes dynamic loading on OpenBSD. The links are not created for MacOS X as they don't work there. Remove any libsane.* links in /usr/local/lib/sane. Such links are created by libtool. As they point to libsane-v4l.so, scanimage -L doesn't find any scanner in case of ld.so misconfigurations. The install target is much quiter now and prints the libtool message only once now. * README.openbsd: Removed comment about broken library links. 2005-10-28 Gerhard Jaeger * po/*.po: Updated po files, corrected/updated german translation. * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c backend/plustek.h: Added OPTION_SPEEDUP. * backend/plustek-usbdevs.c: Changed high-speed setting for UMAX 3400, due to bugreport #302317. Fixed CanoScan N650U settings (bugreport #302433). 2005-10-25 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usbdevs.c: Tweaked LiDE25 settings. * backend/plustek-usb.c: Let CIS devices use green-channel for gray scans. * backend/plustek-usbcal.c: Fixed segfault condition in fine calibration for gray scanmodes. 2005-10-24 Oliver Schwartz * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h backend/snapscan-options.c: Fix transparency range for Epson 2480/2580, fix preview for Epson 2580. 2005-10-24 Henning Meier-Geinitz * doc/descriptions/umax1220u.desc: Marked backend as unmaintained. Used non-broken link. 2005-10-23 Oliver Schwartz * backend/snapscan.c backend/snapscan-scsi.c: Fixes for buffer size in high-res modes by Simon Munton, small changes to delay code. 2005-10-23 Henning Meier-Geinitz * tools/hotplug/libsane.usermap: Added Epson Stylus DX3850 (from niels_kalle ). 2005-10-22 Eddy De Greef * backend/mustek_pp_cis.c: Decreased the maximum number of pixels on a line for CIS scanners a bit to avoid border artifacts. 2005-10-22 Eddy De Greef * backend/mustek_pp_cis.c backend/mustek_pp_cis.h doc/sane-mustek_pp.man: Added an optional engine_delay parameter to work around potential engine instability problems for CIS models. 2005-10-21 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usbdevs.c: Fixed high-speed feature of Canoscan D660U. 2005-10-20 Oliver Schwartz * backend/snapscan-scsi.c: Fixes for 16 bit quality calibration by Simon Munton 2005-10-18 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added HP ScanJet 7650 and UMAX Astra 2500. * doc/descriptions-external/brother2.desc: MFC-210C is reported to work. * NEWS: Created entry for sane-backends 1.0.17. 2005-10-17 Henning Meier-Geinitz * acinclude.m4 configure: Fixed check for libpthread functions. * tools/hotplug/libsane.usermap: Added Brother MFC 210C (from Benjamin Mirza ). * doc/descriptions-external/epkowa.desc: Updated for iscan 1.17.0 (patch from Olaf Meeuwissen ). Bug #302183. 2005-10-16 Henning Meier-Geinitz * AUTHORS: Marked Michael Herder as not active. No activity since some time, most email addresses bounce, no response to pings. Changed contact address to the only one that doesn't directly bounce. * backend/artec_eplus48u.conf: Added support for UMAX AstraSlim 1200 SE (from Harq al-Ada ). * doc/descriptions/artec_eplus48u.desc: UMAX AstraSlim 1200 SE is supported. Backend is unmaintained. * doc/descriptions/unsupported.desc: Added HP ScanJet 4850C. Removed UMAX AstraSlim 1200 SE. * backend/gt68xx.c backend/gt68xx_generic.c doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Minor modifications to sheet-fed scanner support. * backend/mustek_usb2.c backend/mustek_usb2.h backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h backend/mustek_usb2_high.c backend/mustek_usb2_high.h backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c doc/descriptions/mustek_usb2.desc doc/mustek_usb2/mustek_usb2.CHANGES: Removed typedefs for DWORD, WORD and so on. Used int, unsigned short, ... directly in the code. * AUTHORS configure configure.in backend/Makefile.in backend/dll.conf backend/lexmark-x1100.c backend/lexmark.c backend/lexmark.conf backend/lexmark.h doc/Makefile.in doc/sane-lexmark.man tools/hotplug/libsane.usermap: Added lexmark backend (from Fred Odendaal ). * frontend/tstbackend.c: Added vendor "Lexmark". * doc/sane.tex: Added vendor "Lexmark". Used current date. * doc/descriptions-external/lexmark.desc doc/descriptions/lexmark.desc: Moved to doc/descriptions. Added "new" marker. Added manpage link. Updated version. Marked X1180 as "basic" according to man page. * doc/sane.man: Added lexmark backend. * backend/Makefile.in doc/Makefile.in tools/Makefile.in: Make "make dist" work again. * acinclude.m4 configure include/sane/config.h.in: Check for pthread_cancel() and pthread_testcancel(). 2005-10-15 Jochen Eisinger * doc/descriptions/mustek_pp.desc: add Medion MD9806 scanner as supported 2005-10-14 Oliver Schwartz * backend/snapscan-options.c backend/snapscan-scsi.c backend/snapscan.c backend/snapscan-sources.c: Fixes for 16 bit scan mode from Simon Munton 2005-10-11 Oliver Schwartz * backend/snapscan-options.c backend/snapscan-scsi.c backend/snapscan.c backend/snapscan-sources.c: Fixes for Epson 3490/3590 and 16 bit scan mode 2005-10-11 Stephane Voltz * backend/umax_pp.c: change sane_start semantic to allow for batch scanning 2005-10-08 Henning Meier-Geinitz * doc/descriptions-external/mustek_a3p1.desc: Downgraded status to minimal. * doc/descriptions/mustek_usb2.desc: Added "new" marker. 2005-10-06 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added HP ScanJet 3800c. * frontend/scanimage.c: Use correct size for fgets. Patch from Antoine Jacoutot . 2005-10-05 Mattias Ellert * backend/microtek2.c: Off-by-one error 2005-10-03 Henning Meier-Geinitz * AUTHORS acinclude.m4 configure configure.in backend/Makefile.in backend/dll.conf backend/mustek_usb2.c backend/mustek_usb2.h backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h backend/mustek_usb2_high.c backend/mustek_usb2_high.h backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c doc/Makefile.in doc/sane-mustek_usb2.man doc/mustek_usb2/mustek_usb2.CHANGES doc/mustek_usb2/mustek_usb2.TODO: Added mustek_usb backend which supports the Mustek BearPaw 2448 TA Pro. Changes of the code before inclusion to CVS can be found in doc/mustek_usb2/mustek_usb2.CHANGES. * doc/sane.man: Added mustek_usb2. Added description for u12 backend. Added missing links to other backends. * doc/descriptions/mustek_usb2.desc: Moved from descriptions-external. Updated. * PROJECTS: Removed link to BeOS (link goes to nowhere, SANE website has links to projects). Removed link to wi32 port (included in SANE). Removed link to SaneTwain (listed on SANE website). * doc/doxygen-sanei.conf.in: Updated to current doxygen version. Output more C-friendly format. * include/sane/sanei.h include/sane/sanei_backend.h include/sane/sanei_debug.h include/sane/sanei_pp.h include/sane/sanei_usb.h: Fixed some bugs in doxygen documentation. Added some comments. 2005-10-02 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usbdevs.c backend/plustek-usb.h: Updated motor settings for Canoscan LiDE25, thanks to Stephan February for providing these values. 2005-10-02 Henning Meier-Geinitz * doc/descriptions/as6e.desc: Added Trust Easy Scan 9600 Plus (bug #301000). * backend/sharp.c: Fixed some compilation warnings (bug #300404). * AUTHORS: Fixed Rene Rebe's email address. * doc/descriptions/unsupported.desc: Removed Epson Perfection 4180 (supported by epkowa backend). 2005-10-01 Henning Meier-Geinitz * doc/descriptions-external/mustek_a3p1.desc doc/descriptions/unsupported.desc: Added external mustek_a3p1 backend that supports Mustek P 3600 A3 Pro. * tools/Makefile.in: Added udev to list of directories that are part of the distribution. * doc/descriptions.txt: Yet another "itsself". * backend/sp15c.c: Fixed some warnings (bug #302290). 2005-10-01 Julien Blache * doc/sane-find-scanner.man: Typo fix, s/itsself/itself/ from Alfie Costa. 2005-09-29 Eddy De Greef * backend/mustek_pp_cis.c: Minor bug fix: wrong model name was reported for 1200CP+ driver. 2005-09-29 Henning Meier-Geinitz * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c backend/gt68xx_generic.c backend/gt68xx_generic.h backend/gt68xx_high.c backend/gt68xx_low.c backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Added support for Plustek OpticSlim M12 (untested). Based on patch from Gerhard Jaeger . Fixed gt68xx homepage links in man page. Changed minimum version of libusb to 0.1.8. * doc/descriptions/unsupported.desc: Removed Plustek OpticSlim M12. 2005-09-28 Oliver Schwartz * backend/snapscan-options.c backend/snapscan-scsi.c backend/snapscan.c backend/snapscan.h: Added 16 bit option for Epson scanners, untested. Reenabled enhanced inquiry command for epson scanners. 2005-09-28 Julien Blache * tools/udev/convert-usermap.sh: Don't print 0x when matching VID and PID. 2005-09-28 Julien Blache * tools/udev/convert-usermap.sh: Added script to convert hotplug/libsane.usermap to a udev rules file. udev 070 + linux 2.6.14 will deprecate hotplug. * tools/README: updated. 2005-09-28 Henning Meier-Geinitz * doc/descriptions-external/brother.desc: Removed duplicate entry. * doc/descriptions/genesys.desc: Added link to genesys homepage. 2005-09-26 Henning Meier-Geinitz * tools/sane-find-scanner.c: Print more clear output if no USB scanners are found. Point to manual page. Warn if libusb support hasn't been built. 2005-09-25 Henning Meier-Geinitz * doc/descriptions-external/lexmark.desc doc/descriptions/unsupported.desc: Added external lexmark backend. Moved Lexmark X11?? devices to lexmark.desc. Based on patch from Fred Odendaal . 2005-09-25 Oliver Schwartz * backend/snapscan-scsi.c: Removed debugging code for Epson scanners until a working solution has been found. 2005-09-23 Henning Meier-Geinitz * README: Mention in addition to the listed libraries, their header files are also neccessary. A missing usb.h is a common problem when building SANE (--> no USB support). * configure configure.in: Added warning message that's printed when libusb or its header file is not available. * frontend/scanimage.c doc/scanimage.man: Added progress indicator to scanimage (based on patch from Mario Goppold ). Updated copyright information, added links to sane-devel mailing list. * sanei/sanei_usb.c: Ignore EBUSY from usb_set_configuration. This function fails, if a different interface of the same device is claimed (e.g. by usblp). 2005-09-22 Mattias Ellert * backend/hp4200.c backend/umax.c backend/umax1220u.c include/sane/sanei_pv8630.h sanei/sanei_pv8630.c: Fix SANE_DEBUG_SANEI_PV8630 2005-09-19 Frank Zago * backend/dc210.c backend/leo.c backend/matsushita.c backend/sceptre.c backend/sp15c-scsi.h backend/sp15c.h backend/teco1.c backend/teco2.c backend/teco3.c include/sane/sanei_backend.h: Replaced __unused__ with __sane_unused__ to avoid a namespace conflict. 2005-09-18 Henning Meier-Geinitz * backend/gt68xx.c backend/gt68xx_high.c doc/descriptions/gt68xx.descdoc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Fixed segfault that may happen with Mustek ScanExpress A3 USB. * doc/backend-writing.txt: Added some hints about number of files. * backend/mustek.conf doc/sane-mustek.man doc/descriptions/mustek.desc: Mustek Paragon 600 II EP works. Mentioned "parport0". * doc/descriptions/unsupported.desc: Added Canon PIXMA MP750. 2005-09-17 Mattias Ellert * README.darwin: New date for good libusb from CVS 2005-09-07 Mattias Ellert * acinclude.m4, configure: fix disabling of locking when the locking user group does not exist 2005-09-07 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Genius ColorPage Slim 1200. 2005-09-07 Oliver Schirrmeister * backend/fujitsu.c: enabled dropoutcolor for all fi-* scanners. Applied patch from Mario Goppold: Bugfixes for the M3092DCd 2005-09-05 Henning Meier-Geinitz * po/sane-backends.ru.po: Updated Russian translation (from Vitaly Lipatov ). 2005-09-03 Oliver Schwartz * backend/snapscan.h backend/snapscan-scsi.c: (Hopefully) fixed some debugging code for Epson scanners that only works after firmware upload. 2005-09-02 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Epson Perfection 4490 Photo. * tools/hotplug/libsane.usermap: Added HP PSC 750. 2005-09-01 Henning Meier-Geinitz * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_generic.c backend/gt68xx_high.c doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Genius ColorPage Vivid 1200 X is reported to work. Genius ColorPage Vivid 4 XE seems to be the same as 4 X, it just doesn't have buttons. Cleanup of .desc file. Fixed gain setting. Mustek ScanExpress A3 USB 600 dpi color scanning works now. * tools/check-usb-chip.c: Added detection for SQ113 chip (e.g. Mustek BearPaw 2448 TA Pro). 2005-08-31 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Removed Mustek 1800 A3 Pro (this is actually a P3600 A3 Pro). * doc/descriptions-external/mustek_usb2.desc: Mustek BearPaw 2448 TA Pro has status "good" now. 2005-08-30 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Removed Mustek BearPaw 2448 TA Pro (now supported by external Mustek USB2 backend). Added comments about that backend to some other scanners that may be supported later. * doc/descriptions-external/mustek_usb2.desc: New external Backend for Mustek BearPaw 2448 TA Pro. 2005-08-29 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Canon LiDE 60 is GL841 based. 2005-08-28 Henning Meier-Geinitz * doc/descriptions/canon630u.desc: Changed status of Canon 636u too "good". 2005-08-27 Henning Meier-Geinitz * doc/descriptions-external/brother2.desc: Brother MFC-5440CN is reported to work (bug #302105). 2005-08-24 St~hane Voltz * backend/umax_pp.c backend/umax_pp_low.c tools/umax_pp.c: Added EPP support for 610P, revision number changes 2005-08-23 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Canon LiDE 60. Reflecta Digitdia 3600 is not GL841-based. 2005-08-22 St~hane Voltz * tools/check-usb-chip.c: Added rts8858c detection (Lexmark X1100 series, Dell A920). 2005-08-22 Henning Meier-Geinitz * tools/hotplug/libsane.usermap: Added some Genius scanners. Fixed Visioneer Onetouch 7300 USB. Added Plustek OpticSlim 2400. * README.openbsd: Mention problems with library names. 2005-08-22 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * backend/plustek-usb.c backend/plustek-usbscan.c: Fixed problem, when trying to scan at resolutions beyond the optical one (sensor stops too early). * tools/hotplug/libsane.usermap: Added USB ID for LiDE25. 2005-08-21 Henning Meier-Geinitz * doc/descriptions/microtek2.desc doc/descriptions/unsupported.desc: Marked microtek2 backend as unsupported. Changed link to point to old website directly. Listed Microtek ScanMaker 9800XL as supported (bug #301515). 2005-08-21 Mattias Ellert * ltmain.sh acinclude.am configure: Updated from libtool 1.5.18. 2005-08-20 Henning Meier-Geinitz * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c backend/gt68xx_low.h doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Increased number limit of scanners that can work with this backend to 50. Added support for Genius ColorPage Vivid 1200 X (untested). 2005-08-19 Henning Meier-Geinitz * configure configure.in: Fixed check for usbcalls.h on OS/2 (patch from Paul Smedley ). * backend/gt68xx.c backend/gt68xx_devices.c doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Enabled GT68XX_FLAG_NO_STOP for Mustek BearPaw 2400 CU Plus. Some of these scanners don't seem to like that command. * doc/descriptions/artec_eplus48u.desc: Disabled link to backend homepage which doesn't seem to contain anything sane-related. 2005-08-19 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * backend/plustek-usb.h backend/plustek-usbdevs.c: Removed obsolete _WAF_BLACKFINE. LiDE20 does not seem to have a reliable black calibration area, so the devices now will switch off the lamp for dark calibration. * backend/plustek-usbcal.c backend/plustek-usbscan.c: Cleanup. * backend/plustek-usbshading.c: Fixed line statistics and added calibration data output. * backend/plustek.c: Bumped build number. 2005-08-18 Henning Meier-Geinitz * backend/gt68xx.c backend/gt68xx_low.c backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Fixed the problem concerning scanning on *BSD. Scanning only worked once (bug #300597). Fixed compilation warnings. 2005-08-17 Henning Meier-Geinitz * README: Min. libusb version is 0.1.8. 2005-08-17 Julien Blache * tools/hotplug/libsane.usermap: Added USB IDs for the sm3600-supported scanners. If you know the exact model name corresponding to the above IDs, please mail sane-devel: 0x05da/0x40b3, 0x05da/0x40b8, 0x05da/0x40ca, 0x05da/0x40dd, 0x05da/0x40ff 2005-08-16 Oliver Schwartz * backend/snapscan-scsi.c: Make compileable ;-) * backend/snapscan-options.c: Removed //-style comment 2005-08-16 Henning Meier-Geinitz * doc/descriptions/unsupported.desc: Added Canon PIXMA MP780 and Lexmark P6250. * tools/sane-find-scanner.c: Don't print anything else but the found messages in "-q" mode. * tools/check-usb-chip.c: Added check for combination of a PowerVision PV8630 (USB->parport bridge) and National Semiconductor LM9830 as used in the HP 4200. Fixed compilation warning. Added check for Toshiba M011 chips as used in Microtek ScanMaker 3600, 3700, and 3750. * configure configure.in backend/Makefile.in backend/sm3600-scanusb.c backend/sm3600-scanutil.c backend/sm3600.c backend/sm3600.h doc/sane-sm3600.man doc/sane-usb.man: Removed direct dependence of sm3600 on libusb. Used sanei_usb instead. Based on patch from Fran~is Revol . Updated documentation accordingly. Fixed compilation warnings. 2005-08-15 Oliver Schwartz * backend/snapscan.c: Bumped version number * backend/snapscan-scsi.c: Added temporary debug code for 2480/2580 distinction 2005-08-15 Oliver Schwartz * backend/snapscan.c backend/snapscan-options.c backend/snapscan-scsi.c backend/snapscan.h doc/descriptions/snapscan.desc backend/snapscan.conf: Added support for Epson Perfection 3490/3590 (thanks to Matt Judge). 2005-08-15 Gerhard Jaeger * doc/plustek/Plustek-USB.changes: Update. * doc/descriptions/plustek.desc: Updated version number. * backend/plustek.h. backend/plustek-usb.h backend/plustek-usbcalfile.c backend/plustek-usbimg.c backend/plustek-usbmap.c backend/plustek-usbdevs.c backend/plustek-usbscan.c: Cleanup. * backend/plustek.c: Bumped version and build number. Activated IPC between reader-process and parent. * backend/plustek-usbio.c: usbio_DetectLM983x() now returns error if register could not be red, usbio_ResetLM983x() checks for reg7 value before writing. * backend/plustek-usbhw.c: Added button support for Plustek/Genius devices. Changed behaviour of usb_IsScannerReady(). Added special misc I/O setup for CIS devices (usb_ResetRegisters). * backend/plustek-usb.c: Minor fix for startup reset. Removed unnecessary calls to usbio_ResetLM983x(). * backend/plustek-usbshading.c: Readded kCIS670 to add 5% extra to LiDE20 fine calibration. * backend/plustek-usbcal.c: Tried to use the settings from SANE-1.0.13. Added _TWEAK_GAIN to allow increasing GAIN during lamp coarse calibration. Added call to speedtest function. 2005-08-14 Henning Meier-Geinitz * Makefile.in: Added Changelog-1.0.16 to DISTFILES. * backend/hp4200.c doc/sane-hp4200.man doc/descriptions/hp4200.desc: Enabled backtracking by default. This is slower but avois bumping the scan head at the end of the scan area and also missing parts of the scanned image. Increased safety margin for backtracking. This fixes the "garbled image" bug. Set default gamma value to 2. Manpage update. Status set to "basic". * frontend/scanimage.c: Don't exit with error when trying to set inactive options. This especially happens in connection with geometry options and the v4l backend (bugs #300321, #301977). 2005-08-13 Henning Meier-Geinitz * doc/descriptions/niash.desc doc/descriptions/sm3840.desc: Removed ":new". * AUTHORS configure configure.in backend/Makefile.in backend/dll.conf backend/hp4200.c backend/hp4200.conf backend/hp4200.h backend/hp4200_lm9830.c backend/hp4200_lm9830.h doc/Makefile.in doc/sane-hp4200.man doc/sane.man doc/descriptions/hp4200.desc: Added hp4200 backend. Code from Julien BLACHE's sane-backends-extras debian package, based on Frank Zago's patches based on Adrian Perez Jorge's code. Fixed compilation warnings. Fixed bug when no sane device was given. Code indented by indent -gnu. Added man page. * doc/descriptions-external/hp4200.desc: Removed (backend is now included). * configure configure.in: Moved CPPFLAGS definition down to avoid problems with libtool tests for -fPIC. 2005-08-10 Gerhard Jaeger * backend/plustek_pp.c: Bumped build number. * backend/plustek_pp-genericio.c: Fixed bug, that causes ASIC96003/1 based devices to move their sensors too fast in lineart mode at 200 and 300dpi. * doc/plustek/Plustek-PARPORT.changes: Update. 2005-08-09 Henning Meier-Geinitz * sanei/sanei_usb.c: Minor fixes for usbcalls interface (patch from Paul Smedley ). * doc/descriptions/unsupported.desc: Added Hewlett-Packard Scanjet 4370. 2005-08-08 Gerhard Jaeger * acinclude.m4 configure: Locking feature will be disabled on OS/2 per default (according to Paul Smedley ). * doc/plustek/Plustek-USB.changes: Update. * backend/plustek.c: Bumped build number. * doc/plustek/Plustek-USB.txt doc/descriptions/plustek.desc doc/sane-plustek.man backend/plustek-usb.c backend/plustek-usbdevs.c: Added support for CanoScan LiDE25. 2005-08-07 Oliver Schwartz * backend/snapscan.c: Use first known device if no explicit device name is specified 2005-08-07 Henning Meier-Geinitz * configure configure.in: Updated version. Enabled compilation warnings. * doc/releases.txt: Typo fix. * config.guess config.sub: Updated from libtool 1.5.18. * configure configure.in include/sane/config.h.in sanei/sanei_usb.c: Added support for usb functionality on OS/2 using the usbcalls interface (patch from Paul Smedley ). * sanei/sanei_usb.c: Fixed some compilation warnings. Older entries can be found in ChangeLog-1.0.16.