/* sane - Scanner Access Now Easy. Copyright (C) 2003 Oliver Rauch Copyright (C) 2003-2005 Henning Meier-Geinitz Copyright (C) 2004, 2005 Gerhard Jaeger Copyright (C) 2004-2013 Stéphane Voltz Copyright (C) 2005-2009 Pierre Willenbrock Copyright (C) 2007 Luke Copyright (C) 2010 Jack McGill Copyright (C) 2010 Andrey Loginov , xerox travelscan device entry Copyright (C) 2010 Chris Berry and Michael Rickmann for Plustek Opticbook 3600 support This file is part of the SANE package. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. As a special exception, the authors of SANE give permission for additional uses of the libraries contained in this release of SANE. The exception is that, if you link a SANE library with other files to produce an executable, this does not by itself cause the resulting executable to be covered by the GNU General Public License. Your use of that executable is in no way restricted on account of linking the SANE library code into it. This exception does not, however, invalidate any other reasons why the executable file might be covered by the GNU General Public License. If you submit changes to SANE to the maintainers to be included in a subsequent release, you agree by submitting the changes that those changes may be distributed with this exception intact. If you write modifications of your own for SANE, it is your choice whether to permit this exception to apply to your modifications. If you do not wish that, delete this exception notice. */ /* ------------------------------------------------------------------------ */ /* Some setup DAC and CCD tables */ /* ------------------------------------------------------------------------ */ #include "genesys_low.h" StaticInit> s_frontends; void genesys_init_frontend_tables() { s_frontends.init(); GenesysFrontendLayout wolfson_layout; wolfson_layout.offset_addr = { 0x20, 0x21, 0x22 }; wolfson_layout.gain_addr = { 0x28, 0x29, 0x2a }; Genesys_Frontend fe; fe.fe_id = DAC_WOLFSON_UMAX; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x11 }, { 0x20, 0x80 }, { 0x21, 0x80 }, { 0x22, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x02 }, { 0x29, 0x02 }, { 0x2a, 0x02 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_ST12; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x03 }, { 0x20, 0xc8 }, { 0x21, 0xc8 }, { 0x22, 0xc8 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x04 }, { 0x29, 0x04 }, { 0x2a, 0x04 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_ST24; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x21 }, { 0x20, 0xc8 }, { 0x21, 0xc8 }, { 0x22, 0xc8 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x06 }, { 0x29, 0x06 }, { 0x2a, 0x06 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_5345; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x12 }, { 0x20, 0xb8 }, { 0x21, 0xb8 }, { 0x22, 0xb8 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x04 }, { 0x29, 0x04 }, { 0x2a, 0x04 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); // reg3=0x02 for 50-600 dpi, 0x32 (0x12 also works well) at 1200 fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_HP2400; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x02 }, { 0x20, 0xb4 }, { 0x21, 0xb6 }, { 0x22, 0xbc }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x06 }, { 0x29, 0x09 }, { 0x2a, 0x08 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_HP2300; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x04 }, { 0x03, 0x02 }, { 0x20, 0xbe }, { 0x21, 0xbe }, { 0x22, 0xbe }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x04 }, { 0x29, 0x04 }, { 0x2a, 0x04 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE35; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x3d }, { 0x02, 0x08 }, { 0x03, 0x00 }, { 0x20, 0xe1 }, { 0x21, 0xe1 }, { 0x22, 0xe1 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x93 }, { 0x29, 0x93 }, { 0x2a, 0x93 }, }; fe.reg2 = {0x00, 0x19, 0x06}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_AD_XP200; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x58 }, { 0x01, 0x80 }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x09 }, { 0x21, 0x09 }, { 0x22, 0x09 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x09 }, { 0x29, 0x09 }, { 0x2a, 0x09 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_XP300; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x35 }, { 0x02, 0x20 }, { 0x03, 0x14 }, { 0x20, 0xe1 }, { 0x21, 0xe1 }, { 0x22, 0xe1 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x93 }, { 0x29, 0x93 }, { 0x2a, 0x93 }, }; fe.reg2 = {0x07, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_HP3670; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x03 }, { 0x02, 0x05 }, { 0x03, 0x32 }, { 0x20, 0xba }, { 0x21, 0xb8 }, { 0x22, 0xb8 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x06 }, { 0x29, 0x05 }, { 0x2a, 0x04 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_WOLFSON_DSM600; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x35 }, { 0x02, 0x20 }, { 0x03, 0x14 }, { 0x20, 0x85 }, { 0x21, 0x85 }, { 0x22, 0x85 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0xa0 }, { 0x29, 0xa0 }, { 0x2a, 0xa0 }, }; fe.reg2 = {0x07, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE200; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x9d }, { 0x01, 0x91 }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x3f }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x32 }, { 0x29, 0x04 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE700; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x9d }, { 0x01, 0x9e }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x3f }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x2f }, { 0x29, 0x04 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_KVSS080; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x23 }, { 0x02, 0x24 }, { 0x03, 0x0f }, { 0x20, 0x80 }, { 0x21, 0x80 }, { 0x22, 0x80 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x4b }, { 0x29, 0x4b }, { 0x2a, 0x4b }, }; fe.reg2 = {0x00,0x00,0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_G4050; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x23 }, { 0x02, 0x24 }, { 0x03, 0x1f }, { 0x20, 0x45 }, { 0x21, 0x45 }, { 0x22, 0x45 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x4b }, { 0x29, 0x4b }, { 0x2a, 0x4b }, }; fe.reg2 = {0x00,0x00,0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE110; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x80 }, { 0x01, 0x8a }, { 0x02, 0x23 }, { 0x03, 0x4c }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0xca }, { 0x26, 0x94 }, { 0x28, 0x00 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); /** @brief GL124 special case * for GL124 based scanners, this struct is "abused" * in fact the fields are map like below to AFE registers * (from Texas Instrument or alike ?) */ fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE120; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x80 }, { 0x01, 0xa3 }, { 0x02, 0x2b }, { 0x03, 0x4c }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, // actual address 0x05 { 0x25, 0xca }, // actual address 0x06 { 0x26, 0x95 }, // actual address 0x07 { 0x28, 0x00 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_PLUSTEK_3600; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x70 }, { 0x01, 0x80 }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x3f }, { 0x29, 0x3d }, { 0x2a, 0x3d }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CS8400F; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x23 }, { 0x02, 0x24 }, { 0x03, 0x0f }, { 0x20, 0x60 }, { 0x21, 0x5c }, { 0x22, 0x6c }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x8a }, { 0x29, 0x9f }, { 0x2a, 0xc2 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_CS8600F; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x00 }, { 0x01, 0x23 }, { 0x02, 0x24 }, { 0x03, 0x2f }, { 0x20, 0x67 }, { 0x21, 0x69 }, { 0x22, 0x68 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0xdb }, { 0x29, 0xda }, { 0x2a, 0xd7 }, }; fe.reg2 = { 0x00, 0x00, 0x00 }; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_IMG101; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x78 }, { 0x01, 0xf0 }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x00 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); fe = Genesys_Frontend(); fe.fe_id = DAC_PLUSTEK3800; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x78 }, { 0x01, 0xf0 }, { 0x02, 0x00 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x00 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); /* reg0: control 74 data, 70 no data * reg3: offset * reg6: gain * reg0 , reg3, reg6 */ fe = Genesys_Frontend(); fe.fe_id = DAC_CANONLIDE80; fe.layout = wolfson_layout; fe.regs = { { 0x00, 0x70 }, { 0x01, 0x16 }, { 0x02, 0x60 }, { 0x03, 0x00 }, { 0x20, 0x00 }, { 0x21, 0x00 }, { 0x22, 0x00 }, { 0x24, 0x00 }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x28, 0x00 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, }; fe.reg2 = {0x00, 0x00, 0x00}; s_frontends->push_back(fe); } /** for setting up the sensor-specific settings: * Optical Resolution, number of black pixels, number of dummy pixels, * CCD_start_xoffset, and overall number of sensor pixels * registers 0x08-0x0b, 0x10-0x1d and 0x52-0x5e */ StaticInit> s_sensors; void genesys_init_sensor_tables() { s_sensors.init(); Genesys_Sensor sensor; sensor.sensor_id = CCD_UMAX; sensor.optical_res = 1200; sensor.black_pixels = 48; sensor.dummy_pixel = 64; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10800; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 230; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x01 }, { 0x09, 0x03 }, { 0x0a, 0x05 }, { 0x0b, 0x07 }, { 0x16, 0x33 }, { 0x17, 0x05 }, { 0x18, 0x31 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x02 }, { 0x52, 0x13 }, { 0x53, 0x17 }, { 0x54, 0x03 }, { 0x55, 0x07 }, { 0x56, 0x0b }, { 0x57, 0x0f }, { 0x58, 0x23 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_ST12; sensor.optical_res = 600; sensor.black_pixels = 48; sensor.dummy_pixel = 85; sensor.CCD_start_xoffset = 152; sensor.sensor_pixels = 5416; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 230; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x02 }, { 0x09, 0x00 }, { 0x0a, 0x06 }, { 0x0b, 0x04 }, { 0x16, 0x2b }, { 0x17, 0x08 }, { 0x18, 0x20 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x0c }, { 0x1d, 0x03 }, { 0x52, 0x0f }, { 0x53, 0x13 }, { 0x54, 0x17 }, { 0x55, 0x03 }, { 0x56, 0x07 }, { 0x57, 0x0b }, { 0x58, 0x83 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_ST24; sensor.optical_res = 1200; sensor.black_pixels = 48; sensor.dummy_pixel = 64; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10800; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 230; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x0e }, { 0x09, 0x0c }, { 0x0a, 0x00 }, { 0x0b, 0x0c }, { 0x16, 0x33 }, { 0x17, 0x08 }, { 0x18, 0x31 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x02 }, { 0x52, 0x17 }, { 0x53, 0x03 }, { 0x54, 0x07 }, { 0x55, 0x0b }, { 0x56, 0x0f }, { 0x57, 0x13 }, { 0x58, 0x03 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_5345; sensor.optical_res = 1200; sensor.ccd_size_divisor = 2; sensor.black_pixels = 48; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10872; sensor.fau_gain_white_ref = 190; sensor.gain_white_ref = 190; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x0d }, { 0x09, 0x0f }, { 0x0a, 0x11 }, { 0x0b, 0x13 }, { 0x16, 0x0b }, { 0x17, 0x0a }, { 0x18, 0x30 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x03 }, { 0x52, 0x0f }, { 0x53, 0x13 }, { 0x54, 0x17 }, { 0x55, 0x03 }, { 0x56, 0x07 }, { 0x57, 0x0b }, { 0x58, 0x23 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {2.38, 2.35, 2.34}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_HP2400; sensor.optical_res = 1200, sensor.black_pixels = 48; sensor.dummy_pixel = 15; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10872; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x14 }, { 0x09, 0x15 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0xbf }, { 0x17, 0x08 }, { 0x18, 0x3f }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x02 }, { 0x52, 0x0b }, { 0x53, 0x0f }, { 0x54, 0x13 }, { 0x55, 0x17 }, { 0x56, 0x03 }, { 0x57, 0x07 }, { 0x58, 0x63 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x00 }, { 0x5c, 0x0e }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_HP2300; sensor.optical_res = 600; sensor.ccd_size_divisor = 2; sensor.black_pixels = 48; sensor.dummy_pixel = 20; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 5368; sensor.fau_gain_white_ref = 180; sensor.gain_white_ref = 180; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x16 }, { 0x09, 0x00 }, { 0x0a, 0x01 }, { 0x0b, 0x03 }, { 0x16, 0xb7 }, { 0x17, 0x0a }, { 0x18, 0x20 }, { 0x19, 0x2a }, { 0x1a, 0x6a }, { 0x1b, 0x8a }, { 0x1c, 0x00 }, { 0x1d, 0x05 }, { 0x52, 0x0f }, { 0x53, 0x13 }, { 0x54, 0x17 }, { 0x55, 0x03 }, { 0x56, 0x07 }, { 0x57, 0x0b }, { 0x58, 0x83 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x06 }, { 0x5c, 0x0b }, { 0x5d, 0x10 }, { 0x5e, 0x16 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_CANONLIDE35; sensor.optical_res = 1200; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 87; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10400; sensor.fau_gain_white_ref = 0; sensor.gain_white_ref = 0; sensor.exposure = { 0x0400, 0x0400, 0x0400 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x00 }, { 0x19, 0x50 }, { 0x1a, 0x00 }, // TODO: 1a-1d: these do no harm, but may be neccessery for CCD { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x02 }, { 0x52, 0x05 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x07 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x3a }, { 0x59, 0x03 }, { 0x5a, 0x40 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_XP200; sensor.optical_res = 600; sensor.black_pixels = 5; sensor.dummy_pixel = 38; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 5200; sensor.fau_gain_white_ref = 200; sensor.gain_white_ref = 200; sensor.exposure = { 0x1450, 0x0c80, 0x0a28 }; sensor.custom_regs = { { 0x08, 0x16 }, { 0x09, 0x00 }, { 0x0a, 0x01 }, { 0x0b, 0x03 }, { 0x16, 0xb7 }, { 0x17, 0x0a }, { 0x18, 0x20 }, { 0x19, 0x2a }, { 0x1a, 0x6a }, { 0x1b, 0x8a }, { 0x1c, 0x00 }, { 0x1d, 0x05 }, { 0x52, 0x0f }, { 0x53, 0x13 }, { 0x54, 0x17 }, { 0x55, 0x03 }, { 0x56, 0x07 }, { 0x57, 0x0b }, { 0x58, 0x83 }, { 0x59, 0x00 }, { 0x5a, 0xc1 }, { 0x5b, 0x06 }, { 0x5c, 0x0b }, { 0x5d, 0x10 }, { 0x5e, 0x16 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_HP3670; sensor.optical_res = 1200; sensor.black_pixels = 48; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10872; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x0a }, { 0x0a, 0x0b }, { 0x0b, 0x0d }, { 0x16, 0x33 }, { 0x17, 0x07 }, { 0x18, 0x20 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0xc0 }, { 0x1d, 0x43 }, { 0x52, 0x0f }, { 0x53, 0x13 }, { 0x54, 0x17 }, { 0x55, 0x03 }, { 0x56, 0x07 }, { 0x57, 0x0b }, { 0x58, 0x83 }, { 0x59, 0x00 }, { 0x5a, 0x15 }, { 0x5b, 0x05 }, { 0x5c, 0x0a }, { 0x5d, 0x0f }, { 0x5e, 0x00 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_DP665; sensor.optical_res = 600; sensor.black_pixels = 27; sensor.dummy_pixel = 27; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 2496; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x1100, 0x1100, 0x1100 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x04 }, { 0x19, 0x50 }, { 0x1a, 0x10 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x02 }, { 0x52, 0x04 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x05 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x54 }, { 0x59, 0x03 }, { 0x5a, 0x00 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x01 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_ROADWARRIOR; sensor.optical_res = 600; sensor.black_pixels = 27; sensor.dummy_pixel = 27; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 5200; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x1100, 0x1100, 0x1100 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x04 }, { 0x19, 0x50 }, { 0x1a, 0x10 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x02 }, { 0x52, 0x04 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x05 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x54 }, { 0x59, 0x03 }, { 0x5a, 0x00 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x01 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_DSMOBILE600; sensor.optical_res = 600; sensor.black_pixels = 28; sensor.dummy_pixel = 28; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 5200; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x1544, 0x1544, 0x1544 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x04 }, { 0x19, 0x50 }, { 0x1a, 0x10 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x02 }, { 0x52, 0x04 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x05 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x54 }, { 0x59, 0x03 }, { 0x5a, 0x00 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x01 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_XP300; sensor.optical_res = 600; sensor.black_pixels = 27; sensor.dummy_pixel = 27; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10240; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x1100, 0x1100, 0x1100 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x04 }, { 0x19, 0x50 }, { 0x1a, 0x10 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x02 }, { 0x52, 0x04 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x05 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x54 }, { 0x59, 0x03 }, { 0x5a, 0x00 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x01 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_DP685; sensor.optical_res = 600; sensor.black_pixels = 27; sensor.dummy_pixel = 27; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 5020; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x1100, 0x1100, 0x1100 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x02 }, { 0x18, 0x04 }, { 0x19, 0x50 }, { 0x1a, 0x10 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x02 }, { 0x52, 0x04 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x05 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x54 }, { 0x59, 0x03 }, { 0x5a, 0x00 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x01 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE200; sensor.optical_res = 4800; sensor.black_pixels = 87*4; sensor.dummy_pixel = 16*4; sensor.CCD_start_xoffset = 320*8; sensor.sensor_pixels = 5136*8; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x08 }, { 0x18, 0x00 }, { 0x19, 0xff }, { 0x1a, 0x34 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x04 }, { 0x52, 0x03 }, { 0x53, 0x07 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x2a }, { 0x59, 0xe1 }, { 0x5a, 0x55 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x41 }, }; sensor.gamma = {1.7, 1.7, 1.7}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE700; sensor.optical_res = 4800; sensor.black_pixels = 73*8; // black pixels 73 at 600 dpi sensor.dummy_pixel = 16*8; // 384 at 600 dpi sensor.CCD_start_xoffset = 384*8; // 8x5570 segments, 5187+1 for rounding sensor.sensor_pixels = 5188*8; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x08 }, { 0x18, 0x00 }, { 0x19, 0xff }, { 0x1a, 0x34 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x04 }, { 0x52, 0x07 }, { 0x53, 0x03 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x2a }, { 0x59, 0xe1 }, { 0x5a, 0x55 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x41 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE100; sensor.optical_res = 2400; sensor.black_pixels = 87*4, /* black pixels */ sensor.dummy_pixel = 16*4; sensor.CCD_start_xoffset = 320*4; sensor.sensor_pixels = 5136*4; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x01c1, 0x0126, 0x00e5 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x08 }, { 0x18, 0x00 }, { 0x19, 0x50 }, { 0x1a, 0x34 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x04 }, { 0x52, 0x03 }, { 0x53, 0x07 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x2a }, { 0x59, 0xe1 }, { 0x5a, 0x55 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x41 }, }; sensor.gamma = {1.7, 1.7, 1.7}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_KVSS080; sensor.optical_res = 600; sensor.black_pixels = 38; sensor.dummy_pixel = 38; sensor.CCD_start_xoffset = 152; sensor.sensor_pixels = 5376; sensor.fau_gain_white_ref = 160; sensor.gain_white_ref = 160; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.exposure_lperiod = 8000; sensor.custom_regs = { { 0x74, 0x00 }, { 0x75, 0x00 }, { 0x76, 0x00 }, { 0x77, 0x00 }, { 0x78, 0xff }, { 0x79, 0xff }, { 0x7a, 0x03 }, { 0x7b, 0xff }, { 0x7c, 0xff }, { 0x0c, 0x00 }, { 0x70, 0x01 }, { 0x71, 0x03 }, { 0x9e, 0x00 }, { 0xaa, 0x00 }, { 0x16, 0x33 }, { 0x17, 0x1c }, { 0x18, 0x00 }, { 0x19, 0x2a }, { 0x1a, 0x2c }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x04 }, { 0x52, 0x0c }, { 0x53, 0x0f }, { 0x54, 0x00 }, { 0x55, 0x03 }, { 0x56, 0x06 }, { 0x57, 0x09 }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0xc0 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_G4050; sensor.optical_res = 4800; sensor.black_pixels = 50*8; // 31 at 600 dpi dummy_pixels 58 at 1200 sensor.dummy_pixel = 58; sensor.CCD_start_xoffset = 152; sensor.sensor_pixels = 5360*8; sensor.fau_gain_white_ref = 160; sensor.gain_white_ref = 160; sensor.exposure = { 0x2c09, 0x22b8, 0x10f0 }; sensor.custom_regs = {}; sensor.gamma = {1.0, 1.0, 1.0}; { struct CustomSensorSettings { int min_resolution; int max_resolution; int exposure_lperiod; ScanMethod method; GenesysRegisterSettingSet extra_custom_regs; }; CustomSensorSettings custom_settings[] = { { -1, 600, 8016, ScanMethod::FLATBED, { { 0x74, 0x00 }, { 0x75, 0x01 }, { 0x76, 0xff }, { 0x77, 0x03 }, { 0x78, 0xff }, { 0x79, 0xff }, { 0x7a, 0x03 }, { 0x7b, 0xff }, { 0x7c, 0xff }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x00 }, { 0xaa, 0x00 }, { 0x16, 0x33 }, { 0x17, 0x0c }, { 0x18, 0x00 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x08 }, { 0x52, 0x0b }, { 0x53, 0x0e }, { 0x54, 0x11 }, { 0x55, 0x02 }, { 0x56, 0x05 }, { 0x57, 0x08 }, { 0x58, 0x63 }, { 0x59, 0x00 }, { 0x5a, 0x40 }, } }, { 1200, 1200, 56064, ScanMethod::FLATBED, { { 0x74, 0x0f }, { 0x75, 0xff }, { 0x76, 0xff }, { 0x77, 0x00 }, { 0x78, 0x01 }, { 0x79, 0xff }, { 0x7a, 0x00 }, { 0x7b, 0x01 }, { 0x7c, 0xff }, { 0x0c, 0x20 }, { 0x70, 0x08 }, { 0x71, 0x0c }, { 0x9e, 0xc0 }, { 0xaa, 0x05 }, { 0x16, 0x3b }, { 0x17, 0x0c }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x38 }, { 0x1b, 0x10 }, { 0x1c, 0x00 }, { 0x1d, 0x08 }, { 0x52, 0x02 }, { 0x53, 0x05 }, { 0x54, 0x08 }, { 0x55, 0x0b }, { 0x56, 0x0e }, { 0x57, 0x11 }, { 0x58, 0x1b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, } }, { 2400, 2400, 56064, ScanMethod::FLATBED, { { 0x74, 0x0f }, { 0x75, 0xff }, { 0x76, 0xff }, { 0x77, 0x00 }, { 0x78, 0x00 }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x00 }, { 0x7c, 0x00 }, { 0x0c, 0x20 }, { 0x70, 0x08 }, { 0x71, 0x0a }, { 0x9e, 0xc0 }, { 0xaa, 0x05 }, { 0x16, 0x3b }, { 0x17, 0x0c }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x38 }, { 0x1b, 0x10 }, { 0x1c, 0xc0 }, { 0x1d, 0x08 }, { 0x52, 0x02 }, { 0x53, 0x05 }, { 0x54, 0x08 }, { 0x55, 0x0b }, { 0x56, 0x0e }, { 0x57, 0x11 }, { 0x58, 0x1b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, } }, { 4800, 4800, 42752, ScanMethod::FLATBED, { { 0x74, 0x0f }, { 0x75, 0xff }, { 0x76, 0xff }, { 0x77, 0x00 }, { 0x78, 0x00 }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x00 }, { 0x7c, 0x00 }, { 0x0c, 0x21 }, { 0x70, 0x08 }, { 0x71, 0x0a }, { 0x9e, 0xc0 }, { 0xaa, 0x07 }, { 0x16, 0x3b }, { 0x17, 0x0c }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x38 }, { 0x1b, 0x10 }, { 0x1c, 0xc1 }, { 0x1d, 0x08 }, { 0x52, 0x02 }, { 0x53, 0x05 }, { 0x54, 0x08 }, { 0x55, 0x0b }, { 0x56, 0x0e }, { 0x57, 0x11 }, { 0x58, 0x1b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, } }, { -1, -1, 15624, ScanMethod::TRANSPARENCY, { { 0x74, 0x00 }, { 0x75, 0x1c }, { 0x76, 0x7f }, { 0x77, 0x03 }, { 0x78, 0xff }, { 0x79, 0xff }, { 0x7a, 0x03 }, { 0x7b, 0xff }, { 0x7c, 0xff }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x00 }, { 0xaa, 0x00 }, { 0x16, 0x33 }, { 0x17, 0x4c }, { 0x18, 0x01 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x08 }, { 0x52, 0x0e }, { 0x53, 0x11 }, { 0x54, 0x02 }, { 0x55, 0x05 }, { 0x56, 0x08 }, { 0x57, 0x0b }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0xc0 }, } } }; auto base_custom_regs = sensor.custom_regs; for (const CustomSensorSettings& setting : custom_settings) { sensor.min_resolution = setting.min_resolution; sensor.max_resolution = setting.max_resolution; sensor.exposure_lperiod = setting.exposure_lperiod; sensor.method = setting.method; sensor.custom_regs = base_custom_regs; sensor.custom_regs.merge(setting.extra_custom_regs); s_sensors->push_back(sensor); } } sensor = Genesys_Sensor(); sensor.sensor_id = CCD_CS4400F; sensor.optical_res = 4800; sensor.ccd_size_divisor = 4; sensor.black_pixels = 50*8; // 31 at 600 dpi, 58 at 1200 dpi sensor.dummy_pixel = 20; sensor.CCD_start_xoffset = 152; // 5360 max at 600 dpi sensor.sensor_pixels = 5360*8; sensor.fau_gain_white_ref = 160; sensor.gain_white_ref = 160; sensor.exposure = { 0x9c40, 0x9c40, 0x9c40 }; sensor.exposure_lperiod = 11640; sensor.custom_regs = { { 0x74, 0x00 }, { 0x75, 0xf8 }, { 0x76, 0x38 }, { 0x77, 0x00 }, { 0x78, 0xfc }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x92 }, { 0x7c, 0xa4 }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x2d }, { 0xaa, 0x00 }, { 0x16, 0x13 }, { 0x17, 0x0a }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x6b }, { 0x52, 0x0a }, { 0x53, 0x0d }, { 0x54, 0x00 }, { 0x55, 0x03 }, { 0x56, 0x06 }, { 0x57, 0x08 }, { 0x58, 0x5b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_CS8400F; sensor.optical_res = 4800; sensor.black_pixels = 50*8; // 31 at 600 dpi, 58 at 1200 dpi sensor.dummy_pixel = 20; sensor.CCD_start_xoffset = 152; // 5360 max at 600 dpi sensor.sensor_pixels = 5360*8; sensor.fau_gain_white_ref = 160; sensor.gain_white_ref = 160; sensor.exposure = { 0x9c40, 0x9c40, 0x9c40 }; sensor.exposure_lperiod = 7200; sensor.custom_regs = { { 0x74, 0x00 }, { 0x75, 0x0e }, { 0x76, 0x3f }, { 0x77, 0x00 }, { 0x78, 0x00 }, { 0x79, 0x00 }, { 0x7a, 0x01 }, { 0x7b, 0xb6 }, { 0x7c, 0xdb }, { 0x0c, 0x00 }, { 0x70, 0x01 }, { 0x71, 0x02 }, { 0x9e, 0x00 }, { 0xaa, 0x00 }, { 0x16, 0x33 }, { 0x17, 0x0c }, { 0x18, 0x13 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x84 }, { 0x52, 0x0d }, { 0x53, 0x10 }, { 0x54, 0x01 }, { 0x55, 0x04 }, { 0x56, 0x07 }, { 0x57, 0x0a }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_CS8600F; sensor.optical_res = 4800; sensor.ccd_size_divisor = 4; sensor.black_pixels = 31; sensor.dummy_pixel = 20; sensor.CCD_start_xoffset = 0; // not used at the moment // 11372 pixels at 1200 dpi sensor.sensor_pixels = 11372*4; sensor.fau_gain_white_ref = 160; sensor.gain_white_ref = 160; sensor.exposure = { 0x9c40, 0x9c40, 0x9c40 }; sensor.custom_regs = {}; sensor.gamma = {1.0, 1.0, 1.0}; { struct CustomSensorSettings { int min_resolution; int max_resolution; int exposure_lperiod; ScanMethod method; GenesysRegisterSettingSet extra_custom_regs; GenesysRegisterSettingSet custom_fe_regs; }; CustomSensorSettings custom_settings[] = { { -1, 1200, 24000, ScanMethod::FLATBED, { { 0x74, 0x03 }, { 0x75, 0xf0 }, { 0x76, 0xf0 }, { 0x77, 0x03 }, { 0x78, 0xfe }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x92 }, { 0x7c, 0x49 }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x2d }, { 0xaa, 0x00 }, { 0x16, 0x13 }, { 0x17, 0x0a }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x6b }, { 0x52, 0x0c }, { 0x53, 0x0f }, { 0x54, 0x00 }, { 0x55, 0x03 }, { 0x56, 0x06 }, { 0x57, 0x09 }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }, {}, }, { -1, 1200, 24000, ScanMethod::TRANSPARENCY, { { 0x74, 0x03 }, { 0x75, 0xf0 }, { 0x76, 0xf0 }, { 0x77, 0x03 }, { 0x78, 0xfe }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x92 }, { 0x7c, 0x49 }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x2d }, { 0xaa, 0x00 }, { 0x16, 0x13 }, { 0x17, 0x0a }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x6b }, { 0x52, 0x0c }, { 0x53, 0x0f }, { 0x54, 0x00 }, { 0x55, 0x03 }, { 0x56, 0x06 }, { 0x57, 0x09 }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }, {}, }, { 2400, 2400, 24000, ScanMethod::TRANSPARENCY, { { 0x74, 0x03 }, { 0x75, 0xfe }, { 0x76, 0x00 }, { 0x77, 0x03 }, { 0x78, 0xfe }, { 0x79, 0x00 }, { 0x7a, 0x00 }, { 0x7b, 0x92 }, { 0x7c, 0x49 }, { 0x0c, 0x00 }, { 0x70, 0x00 }, { 0x71, 0x02 }, { 0x9e, 0x2d }, { 0xaa, 0x00 }, { 0x16, 0x13 }, { 0x17, 0x15 }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x01 }, { 0x1d, 0x75 }, { 0x52, 0x0c }, { 0x53, 0x0f }, { 0x54, 0x00 }, { 0x55, 0x03 }, { 0x56, 0x06 }, { 0x57, 0x09 }, { 0x58, 0x6b }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }, {}, }, { 4800, 4800, 24000, ScanMethod::TRANSPARENCY, { { 0x74, 0x03 }, { 0x75, 0xff }, { 0x76, 0xff }, { 0x77, 0x03 }, { 0x78, 0xff }, { 0x79, 0xff }, { 0x7a, 0x00 }, { 0x7b, 0x92 }, { 0x7c, 0x49 }, { 0x0c, 0x00 }, { 0x70, 0x0a }, { 0x71, 0x0c }, { 0x72, 0x0c }, { 0x73, 0x0e }, { 0x9e, 0x2d }, { 0xaa, 0x00 }, { 0x16, 0x13 }, { 0x17, 0x15 }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x61 }, { 0x1d, 0x75 }, { 0x52, 0x03 }, { 0x53, 0x06 }, { 0x54, 0x09 }, { 0x55, 0x0c }, { 0x56, 0x0f }, { 0x57, 0x00 }, { 0x58, 0x23 }, { 0x59, 0x00 }, { 0x5a, 0x40 }, }, { { 0x03, 0x1f }, }, }, }; auto base_custom_regs = sensor.custom_regs; for (const CustomSensorSettings& setting : custom_settings) { sensor.min_resolution = setting.min_resolution; sensor.max_resolution = setting.max_resolution; sensor.method = setting.method; sensor.exposure_lperiod = setting.exposure_lperiod; sensor.custom_regs = base_custom_regs; sensor.custom_regs.merge(setting.extra_custom_regs); sensor.custom_fe_regs = setting.custom_fe_regs; s_sensors->push_back(sensor); } } s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_HP_N6310; sensor.optical_res = 2400; // sensor.ccd_size_divisor = 2; Possibly half CCD, needs checking sensor.black_pixels = 96; sensor.dummy_pixel = 26; sensor.CCD_start_xoffset = 128; sensor.sensor_pixels = 42720; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 230; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x10 }, { 0x0a, 0x10 }, { 0x0b, 0x0c }, { 0x16, 0x33 }, { 0x17, 0x0c }, { 0x18, 0x02 }, { 0x19, 0x2a }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x08 }, { 0x52, 0x0b }, { 0x53, 0x0e }, { 0x54, 0x11 }, { 0x55, 0x02 }, { 0x56, 0x05 }, { 0x57, 0x08 }, { 0x58, 0x63 }, { 0x59, 0x00 }, { 0x5a, 0x40 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x06 }, { 0x5e, 0x6f }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE110; sensor.optical_res = 2400; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 303; sensor.sensor_pixels = 5168*4; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x04 }, { 0x18, 0x00 }, { 0x19, 0x01 }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x01 }, { 0x52, 0x00 }, { 0x53, 0x02 }, { 0x54, 0x04 }, { 0x55, 0x06 }, { 0x56, 0x04 }, { 0x57, 0x04 }, { 0x58, 0x04 }, { 0x59, 0x04 }, { 0x5a, 0x1a }, { 0x5b, 0x00 }, { 0x5c, 0xc0 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE120; sensor.optical_res = 2400; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 303; // SEGCNT at 600 DPI by number of segments sensor.sensor_pixels = 5104*4; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x15 }, { 0x17, 0x04 }, { 0x18, 0x00 }, { 0x19, 0x01 }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x01 }, { 0x52, 0x04 }, { 0x53, 0x06 }, { 0x54, 0x00 }, { 0x55, 0x02 }, { 0x56, 0x04 }, { 0x57, 0x04 }, { 0x58, 0x04 }, { 0x59, 0x04 }, { 0x5a, 0x3a }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x1f }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE210; sensor.optical_res = 2400; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 303; sensor.sensor_pixels = 5168*4; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x04 }, { 0x18, 0x00 }, { 0x19, 0x01 }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x01 }, { 0x52, 0x00 }, { 0x53, 0x02 }, { 0x54, 0x04 }, { 0x55, 0x06 }, { 0x56, 0x04 }, { 0x57, 0x04 }, { 0x58, 0x04 }, { 0x59, 0x04 }, { 0x5a, 0x1a }, { 0x5b, 0x00 }, { 0x5c, 0xc0 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE220; sensor.optical_res = 2400; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 16; sensor.CCD_start_xoffset = 303; sensor.sensor_pixels = 5168*4; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x10 }, { 0x17, 0x04 }, { 0x18, 0x00 }, { 0x19, 0x01 }, { 0x1a, 0x30 }, { 0x1b, 0x00 }, { 0x1c, 0x02 }, { 0x1d, 0x01 }, { 0x52, 0x00 }, { 0x53, 0x02 }, { 0x54, 0x04 }, { 0x55, 0x06 }, { 0x56, 0x04 }, { 0x57, 0x04 }, { 0x58, 0x04 }, { 0x59, 0x04 }, { 0x5a, 0x1a }, { 0x5b, 0x00 }, { 0x5c, 0xc0 }, { 0x5d, 0x00 }, { 0x5e, 0x00 }, }; sensor.gamma = {2.1, 2.1, 2.1}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_PLUSTEK_3600; sensor.optical_res = 1200; sensor.ccd_size_divisor = 2; sensor.black_pixels = 87; sensor.dummy_pixel = 87; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10100; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 230; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x00 }, { 0x16, 0x33 }, { 0x17, 0x0b }, { 0x18, 0x11 }, { 0x19, 0x2a }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0xc4 }, { 0x52, 0x07 }, // [GB](HI|LOW) not needed for cis { 0x53, 0x0a }, { 0x54, 0x0c }, { 0x55, 0x00 }, { 0x56, 0x02 }, { 0x57, 0x06 }, { 0x58, 0x22 }, { 0x59, 0x69 }, { 0x5a, 0x40 }, { 0x5b, 0x00 }, // TODO: 5b-5e { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x02 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_IMG101; sensor.optical_res = 1200; sensor.black_pixels = 31; sensor.dummy_pixel = 31; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10800; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x60 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x8b }, { 0x16, 0xbb }, { 0x17, 0x13 }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x34 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x06 }, { 0x52, 0x02 }, { 0x53, 0x04 }, { 0x54, 0x06 }, { 0x55, 0x08 }, { 0x56, 0x0a }, { 0x57, 0x00 }, { 0x58, 0x59 }, { 0x59, 0x31 }, { 0x5a, 0x40 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x1f }, }; sensor.gamma = {1.7, 1.7, 1.7}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CCD_PLUSTEK3800; sensor.optical_res = 1200; sensor.black_pixels = 31; sensor.dummy_pixel = 31; sensor.CCD_start_xoffset = 0; sensor.sensor_pixels = 10200; sensor.fau_gain_white_ref = 210; sensor.gain_white_ref = 200; sensor.exposure = { 0x0000, 0x0000, 0x0000 }; sensor.custom_regs = { { 0x08, 0x60 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x8b }, { 0x16, 0xbb }, { 0x17, 0x13 }, { 0x18, 0x10 }, { 0x19, 0x2a }, { 0x1a, 0x34 }, { 0x1b, 0x00 }, { 0x1c, 0x20 }, { 0x1d, 0x06 }, { 0x52, 0x02 }, { 0x53, 0x04 }, { 0x54, 0x06 }, { 0x55, 0x08 }, { 0x56, 0x0a }, { 0x57, 0x00 }, { 0x58, 0x59 }, { 0x59, 0x31 }, { 0x5a, 0x40 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x00 }, { 0x5e, 0x1f }, }; sensor.gamma = {1.7, 1.7, 1.7}; s_sensors->push_back(sensor); sensor = Genesys_Sensor(); sensor.sensor_id = CIS_CANONLIDE80, sensor.optical_res = 1200; // real hardware limit is 2400 sensor.ccd_size_divisor = 2; sensor.black_pixels = 20; sensor.dummy_pixel = 6; // tuned to give 3*8 multiple startx coordinate during shading calibration sensor.CCD_start_xoffset = 34; // 14=>3, 20=>2 // 10400, too wide=>10288 in shading data 10240~ // 10208 too short for shading, max shading data = 10240 pixels, endpix-startpix=10208 sensor.sensor_pixels = 10240; sensor.fau_gain_white_ref = 150; sensor.gain_white_ref = 150; // maps to 0x70-0x73 for GL841 sensor.exposure = { 0x1000, 0x1000, 0x0500 }; sensor.custom_regs = { { 0x08, 0x00 }, { 0x09, 0x05 }, { 0x0a, 0x07 }, { 0x0b, 0x09 }, { 0x16, 0x00 }, { 0x17, 0x01 }, { 0x18, 0x00 }, { 0x19, 0x06 }, { 0x1a, 0x00 }, { 0x1b, 0x00 }, { 0x1c, 0x00 }, { 0x1d, 0x04 }, { 0x52, 0x03 }, { 0x53, 0x07 }, { 0x54, 0x00 }, { 0x55, 0x00 }, { 0x56, 0x00 }, { 0x57, 0x00 }, { 0x58, 0x29 }, { 0x59, 0x69 }, { 0x5a, 0x55 }, { 0x5b, 0x00 }, { 0x5c, 0x00 }, { 0x5d, 0x20 }, { 0x5e, 0x41 }, }; sensor.gamma = {1.0, 1.0, 1.0}; s_sensors->push_back(sensor); } /** for General Purpose Output specific settings: * initial GPO value (registers 0x66-0x67/0x6c-0x6d) * GPO enable mask (registers 0x68-0x69/0x6e-0x6f) * The first register is for GPIO9-GPIO16, the second for GPIO1-GPIO8 */ static Genesys_Gpo Gpo[] = { /* UMAX */ {GPO_UMAX, {0x11, 0x00} , {0x51, 0x20} , } , /* Plustek OpticPro S12/ST12 */ {GPO_ST12, {0x11, 0x00} , {0x51, 0x20} , } , /* Plustek OpticPro S24/ST24 */ {GPO_ST24, {0x00, 0x00} , {0x51, 0x20} , } , /* MD5345/MD6471 */ {GPO_5345, {0x30, 0x18} , /* bits 11-12 are for bipolar V-ref input voltage */ {0xa0, 0x18} , } , /* HP2400C */ {GPO_HP2400, {0x30, 0x00} , {0x31, 0x00} , } , /* HP2300C */ {GPO_HP2300, {0x00, 0x00} , {0x00, 0x00} , } , /* CANONLIDE35 */ {GPO_CANONLIDE35, {0x02, 0x80} , {0xef, 0x80} , } , /* 7: XP200 */ {GPO_XP200, {0x30, 0x00} , {0xb0, 0x00} , }, /* HP3670 */ {GPO_HP3670, {0x00, 0x00} , {0x00, 0x00} } , /* 8: XP300 */ {GPO_XP300, {0x09, 0xc6}, {0xbb, 0x00}, } , /* Syscan DP 665 */ { GPO_DP665, {0x18, 0x00},/*0x19,0x00*/ {0xbb, 0x00}, } , /* Syscan DP 685 */ { GPO_DP685, {0x3f, 0x46}, /* 6c, 6d */ {0xfb, 0x00}, /* 6e, 6f */ }, /* CANONLIDE200 */ {GPO_CANONLIDE200, {0xfb, 0x20}, /* 0xfb when idle , 0xf9/0xe9 (1200) when scanning */ {0xff, 0x00}, }, /* CANONLIDE700 */ {GPO_CANONLIDE700, {0xdb, 0xff}, {0xff, 0x80}, }, {GPO_KVSS080, {0xf5, 0x20}, {0x7e, 0xa1}, } , {GPO_G4050, {0x20, 0x00}, {0xfc, 0x00}, } , /* HP N6310 */ {GPO_HP_N6310, {0xa3, 0x00}, {0x7f, 0x00}, } , /* CANONLIDE110 */ {GPO_CANONLIDE110, {0xfb, 0x20}, {0xff, 0x00}, } , /* CANONLIDE120 */ {GPO_CANONLIDE120, {0xfb, 0x20}, {0xff, 0x00}, } , /* CANONLIDE210 */ {GPO_CANONLIDE210, {0xfb, 0x20}, {0xff, 0x00}, } , /* Plustek 3600 */ {GPO_PLUSTEK_3600, {0x02, 0x00}, {0x1e, 0x80}, } /* CanoScan 4400f */ , {GPO_CS4400F, {0x01, 0x7f}, {0xff, 0x00}, } /* CanoScan 8400f */ , {GPO_CS8400F, {0x9a, 0xdf}, {0xfe, 0x60}, } /* CanoScan 8600F */ , { GPO_CS8600F, { 0x20, 0x7c }, { 0xff, 0x00 }, } /* Canon Image formula 101 */ , {GPO_IMG101, {0x41, 0xa4}, {0x13, 0xa7} } /* Plustek OpticBook 3800 */ , {GPO_PLUSTEK3800, {0x41, 0xa4}, {0x13, 0xa7} }, /* Canon LiDE 80 */ { GPO_CANONLIDE80, {0x28, 0x90}, {0x75, 0x80}, } }; static Genesys_Motor Motor[] = { /* UMAX */ {MOTOR_UMAX, 1200, /* motor base steps */ 2400, /* maximum motor resolution */ 1, /* maximum step mode */ 1, /* number of power modes*/ {{{ 11000, /* maximum start speed */ 3000, /* maximum end speed */ 128, /* step count */ 1.0, /* nonlinearity */ }, { 11000, 3000, 128, 1.0, },},}, }, {MOTOR_5345, /* MD5345/6228/6471 */ 1200, 2400, 1, 1, {{{ 2000, 1375, 128, 0.5, }, { 2000, 1375, 128, 0.5, },},}, }, {MOTOR_ST24, /* ST24 */ 2400, 2400, 1, 1, {{{ 2289, 2100, 128, 0.3, }, { 2289, 2100, 128, 0.3, },},}, }, {MOTOR_HP3670, /* HP 3670 */ 1200, 2400, 1, 1, {{{ 11000, /* start speed */ 3000, /* max speed */ 128, /* min steps */ 0.25, }, { 11000, 3000, 128, 0.5, },},}, }, {MOTOR_HP2400, /* HP 2400c */ 1200, 1200, 1, 1, {{{ 11000, /* start speed */ 3000, /* max speed */ 128, /* min steps */ 0.25, }, { 11000, 3000, 128, 0.5, },},}, }, {MOTOR_HP2300, /* HP 2300c */ 600, /* 600/1200 */ 1200, 1, 1, {{{ 3200, 1200, 128, 0.5, }, { 3200, 1200, 128, 0.5, },},}, }, {MOTOR_CANONLIDE35, /* Canon LiDE 35 */ 1200, 2400, 1, 1, {{{ 3500, 1300, 60, 0.8, }, { 3500, 1400, 60, 0.8, },},}, }, {MOTOR_XP200, /* Strobe XP200 */ 600, 600, 1, 1, {{{ 3500, 1300, 60, 0.25, }, { 3500, 1400, 60, 0.5, },},}, }, {MOTOR_XP300, /* 7: Visioneer Strobe XP300 */ 300, 600, 1, 1, {{{ /* works best with GPIO10, GPIO14 off */ 3700, 3700, 2, 0.8, }, { 11000, 11000, 2, 0.8, },},}, }, {MOTOR_DP665, /* Syscan DP 665 */ 750, 1500, 1, 1, {{{ 3000, 2500, 10, 0.8, }, { 11000, 11000, 2, 0.8, },},}, }, {MOTOR_ROADWARRIOR, /* Visioneer Roadwarrior */ 750, 1500, 1, 1, {{{ 3000, 2600, 10, 0.8, }, { 11000, 11000, 2, 0.8, },},}, }, {MOTOR_DSMOBILE_600, /* Pentax DSmobile 600 */ 750, 1500, 2, 1, {{{ 6666, 3700, 8, 0.8, }, { 6666, 3700, 8, 0.8, },},}, }, {MOTOR_CANONLIDE100, /* Canon LiDE 100 */ 1200, 6400, 2, /* maximum step type count */ 1, /* maximum power modes count */ { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 127, 0.50}, /* full step */ { 3000, 1500, 127, 0.50}, /* half step */ { 3*2712, 3*2712, 16, 0.80}, /* quarter step 0.75*2712 */ }, }, }, {MOTOR_CANONLIDE200, /* Canon LiDE 200 */ 1200, 6400, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 127, 0.50}, /* full step */ { 3000, 1500, 127, 0.50}, /* half step */ { 3*2712, 3*2712, 16, 0.80}, /* quarter step 0.75*2712 */ }, }, }, {MOTOR_CANONLIDE700, /* Canon LiDE 700 */ 1200, 6400, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 127, 0.50}, /* full step */ { 3000, 1500, 127, 0.50}, /* half step */ { 3*2712, 3*2712, 16, 0.80}, /* quarter step 0.75*2712 */ }, }, }, {MOTOR_KVSS080, 1200, 1200, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 22222, 500, 246, 0.5 }, /* max speed / dpi * base dpi => exposure */ { 22222, 500, 246, 0.5 }, { 22222, 500, 246, 0.5 }, }, }, }, {MOTOR_G4050, 2400, 9600, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 3961, 240, 246, 0.8 }, /* full step */ { 3961, 240, 246, 0.8 }, /* half step */ { 3961, 240, 246, 0.8 }, /* quarter step */ }, }, }, {MOTOR_CS8400F, 2400, 9600, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 3961, 240, 246, 0.8 }, /* full step */ { 3961, 240, 246, 0.8 }, /* half step */ { 3961, 240, 246, 0.8 }, /* quarter step */ }, }, }, { MOTOR_CS8600F, 2400, 9600, 2, 1, { /* motor slopes */ { /* power mode 0 */ { 3961, 240, 246, 0.8 }, /* full step */ { 3961, 240, 246, 0.8 }, /* half step */ { 3961, 240, 246, 0.8 }, /* quarter step */ }, }, }, {MOTOR_CANONLIDE110, /* Canon LiDE 110 */ 4800, 9600, 1, /* maximum step type count */ 1, /* maximum power modes count */ { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 256, 0.50}, /* full step */ }, }, }, {MOTOR_CANONLIDE120, /* Canon LiDE 120 */ 4800, 9600, 1, /* maximum step type count */ 1, /* maximum power modes count */ { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 256, 0.50}, /* full step */ }, }, }, {MOTOR_CANONLIDE210, /* Canon LiDE 210 */ 4800, 9600, 1, /* maximum step type count */ 1, /* maximum power modes count */ { /* motor slopes */ { /* power mode 0 */ { 3000, 1000, 256, 0.50}, /* full step */ }, }, }, {MOTOR_PLUSTEK_3600, /* PLUSTEK 3600 */ 1200, 2400, 1, 1, { { { 3500, 1300, 60, 0.8 }, { 3500, 3250, 60, 0.8 }, }, },}, {MOTOR_IMG101, /* Canon Image Formula 101 */ 600, 1200, 1, 1, { { { 3500, 1300, 60, 0.8 }, { 3500, 3250, 60, 0.8 }, }, },}, {MOTOR_PLUSTEK3800, /* Plustek OpticBook 3800 */ 600, 1200, 1, 1, { { { 3500, 1300, 60, 0.8 }, { 3500, 3250, 60, 0.8 }, }, },}, {MOTOR_CANONLIDE80, 2400, /* 2400 ???? */ 4800, /* 9600 ???? */ 1, /* max step type */ 1, /* power mode count */ { { /* start speed, max end speed, step number */ /* maximum speed (second field) is used to compute exposure as seen by motor */ /* exposure=max speed/ slope dpi * base dpi */ /* 5144 = max pixels at 600 dpi */ /* 1288=(5144+8)*ydpi(=300)/base_dpi(=1200) , where 5152 is exposure */ /* 6440=9660/(1932/1288) */ { 9560, 1912, 31, 0.8 }, }, },}, }; /* here we have the various device settings... */ static Genesys_Model umax_astra_4500_model = { "umax-astra-4500", /* Name */ "UMAX", /* Device vendor string */ "Astra 4500", /* Device model name */ MODEL_UMAX_ASTRA_4500, GENESYS_GL646, NULL, {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */ {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (3.5), /* Start of scan area in mm (x) */ SANE_FIX (7.5), /* Start of scan area in mm (y) */ SANE_FIX (218.0), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_UMAX, DAC_WOLFSON_UMAX, GPO_UMAX, MOTOR_UMAX, GENESYS_FLAG_UNTESTED, /* Which flags are needed for this scanner? */ /* untested, values set by hmg */ GENESYS_HAS_NO_BUTTONS, /* no buttons supported */ 20, 0, // shading_ta_lines 200 }; static Genesys_Model canon_lide_50_model = { "canon-lide-50", /* Name */ "Canon", /* Device vendor string */ "LiDE 35/40/50", /* Device model name */ MODEL_CANON_LIDE_50, GENESYS_GL841, NULL, { 1200, 600, 400, 300, 240, 200, 150, 75, 0}, /* possible x-resolutions */ {2400, 1200, 600, 400, 300, 240, 200, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.42), /* Start of scan area in mm (x) */ SANE_FIX (7.9), /* Start of scan area in mm (y) */ SANE_FIX (218.0), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (6.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_CANONLIDE35, DAC_CANONLIDE35, GPO_CANONLIDE35, MOTOR_CANONLIDE35, GENESYS_FLAG_LAZY_INIT | /* Which flags are needed for this scanner? */ GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_WHITE_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_COPY_SW, 280, 0, // shading_ta_lines 400 }; static Genesys_Model panasonic_kvss080_model = { "panasonic-kv-ss080", /* Name */ "Panasonic", /* Device vendor string */ "KV-SS080", /* Device model name */ MODEL_PANASONIC_KV_SS080, GENESYS_GL843, NULL, { 600, /* 500, 400,*/ 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ { 1200, 600, /* 500, 400, */ 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (7.2), /* Start of scan area in mm (x) */ SANE_FIX (14.7), /* Start of scan area in mm (y) */ SANE_FIX (217.7), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (9.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_KVSS080, DAC_KVSS080, GPO_KVSS080, MOTOR_KVSS080, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW , 100, 0, // shading_ta_lines 100 }; static Genesys_Model hp4850c_model = { "hewlett-packard-scanjet-4850c", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet 4850C", /* Device model name */ MODEL_HP_SCANJET_4850C, GENESYS_GL843, NULL, {2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (7.9), /* Start of scan area in mm (x) */ SANE_FIX (5.9), /* Start of scan area in mm (y) */ SANE_FIX (219.6), /* Size of scan area in mm (x) */ SANE_FIX (314.5), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in line number */ /* 0 38 76 OK 1200/2400 */ /* 0 24 48 OK [100,600] dpi */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_G4050, DAC_G4050, GPO_G4050, MOTOR_G4050, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 100, 0, // shading_ta_lines 100 }; static Genesys_Model hpg4010_model = { "hewlett-packard-scanjet-g4010", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet G4010", /* Device model name */ MODEL_HP_SCANJET_G4010, GENESYS_GL843, NULL, { 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, { 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (8.0), /* Start of scan area in mm (x) */ SANE_FIX (13.00), /* Start of scan area in mm (y) */ SANE_FIX (217.9), /* Size of scan area in mm (x) 5148 pixels at 600 dpi*/ SANE_FIX (315.0), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in line number */ /* 0 38 76 OK 1200/2400 */ /* 0 24 48 OK [100,600] dpi */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_G4050, DAC_G4050, GPO_G4050, MOTOR_G4050, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 100, 0, // shading_ta_lines 100 }; static Genesys_Model hpg4050_model = { "hewlett-packard-scanjet-g4050", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet G4050", /* Device model name */ MODEL_HP_SCANJET_G4050, GENESYS_GL843, NULL, { 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, { 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (8.0), /* Start of scan area in mm (x) */ SANE_FIX (13.00), /* Start of scan area in mm (y) */ SANE_FIX (217.9), /* Size of scan area in mm (x) 5148 pixels at 600 dpi*/ SANE_FIX (315.0), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (8.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (13.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (217.9), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (250.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (40.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in line number */ /* 0 38 76 OK 1200/2400 */ /* 0 24 48 OK [100,600] dpi */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_G4050, DAC_G4050, GPO_G4050, MOTOR_G4050, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 100, 0, // shading_ta_lines 100 }; static Genesys_Model canon_4400f_model = { "canon-canoscan-4400f", /* Name */ "Canon", /* Device vendor string */ "Canoscan 4400f", /* Device model name */ MODEL_CANON_CANOSCAN_4400F, GENESYS_GL843, NULL, { 4800, 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, { 4800, 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (6.0), /* Start of scan area in mm (x) */ SANE_FIX (13.00), /* Start of scan area in mm (y) */ SANE_FIX (217.9), /* Size of scan area in mm (x) 5148 pixels at 600 dpi*/ SANE_FIX (315.0), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (8.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (13.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (217.9), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (250.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (40.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in line number */ /* 0 38 76 OK 1200/2400 */ /* 0 24 48 OK [100,600] dpi */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_CS4400F, DAC_G4050, GPO_CS4400F, MOTOR_G4050, GENESYS_FLAG_NO_CALIBRATION | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_FULL_HWDPI_MODE | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 100, 0, // shading_ta_lines 100 }; static Genesys_Model canon_8400f_model = { "canon-canoscan-8400f", /* Name */ "Canon", /* Device vendor string */ "Canoscan 8400f", /* Device model name */ MODEL_CANON_CANOSCAN_8400F, GENESYS_GL843, NULL, { 4800, 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, { 4800, 2400, 1200, 600, 400, 300, 200, 150, 100, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (4.0), /* Start of scan area in mm (x) */ SANE_FIX (13.00), /* Start of scan area in mm (y) */ SANE_FIX (217.9), /* Size of scan area in mm (x) 5148 pixels at 600 dpi*/ SANE_FIX (315.0), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (8.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (13.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (217.9), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (250.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (40.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in line number */ /* 0 38 76 OK 1200/2400 */ /* 0 24 48 OK [100,600] dpi */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_CS8400F, DAC_CS8400F, GPO_CS8400F, MOTOR_CS8400F, GENESYS_FLAG_NO_CALIBRATION | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_FULL_HWDPI_MODE | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 100, 0, // shading_ta_lines 100 }; static Genesys_Model canon_8600f_model = { "canon-canoscan-8600f", // name "Canon", // Device vendor string "Canoscan 8600f", // Device model name MODEL_CANON_CANOSCAN_8600F, GENESYS_GL843, // ASIC type NULL, { 4800, 2400, 1200, 600, 400, 300, 0}, // TODO: resolutions for non-XPA mode { 4800, 2400, 1200, 600, 400, 300, 0}, // TODO: resolutions for non-XPA mode { 16, 8, 0 }, // possible depths in gray mode { 16, 8, 0 }, // possible depths in color mode SANE_FIX(24.0), // Start of scan area in mm (x) SANE_FIX(10.0), // Start of scan area in mm (y) SANE_FIX(216.0), // Size of scan area in mm (x) SANE_FIX(297.0), // Size of scan area in mm (y) SANE_FIX(0.0), // Start of white strip in mm (y) SANE_FIX(8.0), // Start of black mark in mm (x) SANE_FIX(95.0), // x_offset_ta SANE_FIX(26.0), // y_offset_ta SANE_FIX(70.0), // x_size_ta SANE_FIX(230.0), // y_size_ta SANE_FIX(12.5), // y_offset_calib SANE_FIX(0.0), // Size of scan area after paper sensor stops // sensing document in mm SANE_FIX(0.0), // Amount of feeding needed to eject document // after finishing scanning in mm 0, 48, 96, // RGB CCD Line-distance correction in line number COLOR_ORDER_RGB, // Order of the CCD/CIS colors SANE_FALSE, // Is this a CIS scanner? SANE_FALSE, // Is this a sheetfed scanner? CCD_CS8600F, DAC_CS8600F, GPO_CS8600F, MOTOR_CS8600F, GENESYS_FLAG_HAS_UTA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_FULL_HWDPI_MODE | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_SHADING_REPARK, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW, 50, // shading_lines 50, // shading_ta_lines 100 }; static Genesys_Model canon_lide_100_model = { "canon-lide-100", /* Name */ "Canon", /* Device vendor string */ "LiDE 100", /* Device model name */ MODEL_CANON_LIDE_100, GENESYS_GL847, NULL, {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (1.1), /* Start of scan area in mm (x) */ SANE_FIX (8.3), /* Start of scan area in mm (y) */ SANE_FIX (216.07), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (1.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE100, DAC_CANONLIDE200, GPO_CANONLIDE200, MOTOR_CANONLIDE100, /* Which flags are needed for this scanner? */ GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_SIS_SENSOR | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 50, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_110_model = { "canon-lide-110", /* Name */ "Canon", /* Device vendor string */ "LiDE 110", /* Device model name */ MODEL_CANON_LIDE_110, GENESYS_GL124, NULL, {4800, 2400, 1200, 600, /* 400,*/ 300, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, /* 400,*/ 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (2.2), /* Start of scan area in mm (x) */ SANE_FIX (9.0), /* Start of scan area in mm (y) */ SANE_FIX (216.70), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (1.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE110, DAC_CANONLIDE110, GPO_CANONLIDE110, MOTOR_CANONLIDE110, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 50, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_120_model = { "canon-lide-120", /* Name */ "Canon", /* Device vendor string */ "LiDE 120", /* Device model name */ MODEL_CANON_LIDE_120, GENESYS_GL124, NULL, {4800, 2400, 1200, 600, 300, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (8.0), /* Start of scan area in mm (y) */ SANE_FIX (216.0), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (1.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE120, DAC_CANONLIDE120, GPO_CANONLIDE120, MOTOR_CANONLIDE120, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 50, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_210_model = { "canon-lide-210", /* Name */ "Canon", /* Device vendor string */ "LiDE 210", /* Device model name */ MODEL_CANON_LIDE_210, GENESYS_GL124, NULL, {4800, 2400, 1200, 600, /* 400,*/ 300, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, /* 400,*/ 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (2.2), /* Start of scan area in mm (x) */ SANE_FIX (8.7), /* Start of scan area in mm (y) */ SANE_FIX (216.70), /* Size of scan area in mm (x) */ SANE_FIX (297.5), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE210, DAC_CANONLIDE110, GPO_CANONLIDE210, MOTOR_CANONLIDE210, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_EXTRA_SW, 60, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_220_model = { "canon-lide-220", /* Name */ "Canon", /* Device vendor string */ "LiDE 220", /* Device model name */ MODEL_CANON_LIDE_220, GENESYS_GL124, /* or a compatible one */ NULL, {4800, 2400, 1200, 600, 300, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (2.2), /* Start of scan area in mm (x) */ SANE_FIX (8.7), /* Start of scan area in mm (y) */ SANE_FIX (216.70), /* Size of scan area in mm (x) */ SANE_FIX (297.5), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE220, DAC_CANONLIDE110, GPO_CANONLIDE210, MOTOR_CANONLIDE210, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_EXTRA_SW, 60, 0, // shading_ta_lines 400 }; static Genesys_Model canon_5600f_model = { "canon-5600f", /* Name */ "Canon", /* Device vendor string */ "5600F", /* Device model name */ MODEL_CANON_CANOSCAN_5600F, GENESYS_GL847, NULL, {1200, 600, 400, 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ {1200, 600, 400, 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (1.1), /* Start of scan area in mm (x) */ SANE_FIX (8.3), /* Start of scan area in mm (y) */ SANE_FIX (216.07), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE200, DAC_CANONLIDE200, GPO_CANONLIDE200, MOTOR_CANONLIDE200, GENESYS_FLAG_UNTESTED /* not working yet */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_SIS_SENSOR | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 50, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_700f_model = { "canon-lide-700f", /* Name */ "Canon", /* Device vendor string */ "LiDE 700F", /* Device model name */ MODEL_CANON_LIDE_700F, GENESYS_GL847, NULL, {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (3.1), /* Start of scan area in mm (x) */ SANE_FIX (8.1), /* Start of scan area in mm (y) */ SANE_FIX (216.07), /* Size of scan area in mm (x) */ SANE_FIX (297.0), /* Size of scan area in mm (y) */ SANE_FIX (1.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE700, DAC_CANONLIDE700, GPO_CANONLIDE700, MOTOR_CANONLIDE700, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_SIS_SENSOR | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 70, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_200_model = { "canon-lide-200", /* Name */ "Canon", /* Device vendor string */ "LiDE 200", /* Device model name */ MODEL_CANON_LIDE_200, GENESYS_GL847, NULL, {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ {4800, 2400, 1200, 600, 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (1.1), /* Start of scan area in mm (x) */ SANE_FIX (8.3), /* Start of scan area in mm (y) */ SANE_FIX (216.07), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE200, DAC_CANONLIDE200, GPO_CANONLIDE200, MOTOR_CANONLIDE200, GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_SIS_SENSOR | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_SHADING_REPARK | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_FILE_SW, 50, 0, // shading_ta_lines 400 }; static Genesys_Model canon_lide_60_model = { "canon-lide-60", /* Name */ "Canon", /* Device vendor string */ "LiDE 60", /* Device model name */ MODEL_CANON_LIDE_60, GENESYS_GL841, NULL, {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */ {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.42), /* Start of scan area in mm (x) */ SANE_FIX (7.9), /* Start of scan area in mm (y) */ SANE_FIX (218.0), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (6.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_CANONLIDE35, DAC_CANONLIDE35, GPO_CANONLIDE35, MOTOR_CANONLIDE35, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_WHITE_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW /* Has four buttons: COPY, SCAN, PDF, EMAIL */ | GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_EMAIL_SW, 300, 0, // shading_ta_lines 400 }; /* this is completely untested -- hmg */ static Genesys_Model canon_lide_80_model = { "canon-lide-80", /* Name */ "Canon", /* Device vendor string */ "LiDE 80", /* Device model name */ MODEL_CANON_LIDE_80, GENESYS_GL841, NULL, { 1200, 600, 400, 300, 240, 150, 100, 75, 0}, /* possible x-resolutions */ {2400, 1200, 600, 400, 300, 240, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.42), /* Start of scan area in mm (x) 0.42 */ SANE_FIX (7.90), /* Start of scan area in mm (y) 7.90 */ SANE_FIX (216.07), /* Size of scan area in mm (x) 218.00 */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (4.5), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CIS_CANONLIDE80, DAC_CANONLIDE80, GPO_CANONLIDE80, MOTOR_CANONLIDE80, GENESYS_FLAG_LAZY_INIT | /* Which flags are needed for this scanner? */ GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_WHITE_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_COPY_SW, 160, /* 280 @2400 */ 0, // shading_ta_lines 400 }; static Genesys_Model hp2300c_model = { "hewlett-packard-scanjet-2300c", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet 2300c", /* Device model name */ MODEL_HP_SCANJET_2300C, GENESYS_GL646, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions, motor can go up to 1200 dpi */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (2.0), /* Start of scan area in mm (x_offset) */ SANE_FIX (7.5), /* Start of scan area in mm (y_offset) */ SANE_FIX (215.9), /* Size of scan area in mm (x) */ SANE_FIX (295.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 16, 8, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_HP2300, DAC_WOLFSON_HP2300, GPO_HP2300, MOTOR_HP2300, GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_COPY_SW, 40, 0, // shading_ta_lines 132 }; static Genesys_Model hp2400c_model = { "hewlett-packard-scanjet-2400c", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet 2400c", /* Device model name */ MODEL_HP_SCANJET_2400C, GENESYS_GL646, NULL, {1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (6.5), /* Start of scan area in mm (x) */ SANE_FIX (2.5), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (297.2), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_HP2400, DAC_WOLFSON_HP2400, GPO_HP2400, MOTOR_HP2400, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_SCAN_SW, 20, 0, // shading_ta_lines 132 }; static Genesys_Model visioneer_xp200_model = { "visioneer-strobe-xp200", /* Name */ "Visioneer", /* Device vendor string */ "Strobe XP200", /* Device model name */ MODEL_VISIONEER_STROBE_XP200, GENESYS_GL646, NULL, {600, 300, 200, 100, 75, 0}, /* possible x-resolutions */ {600, 300, 200, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.5), /* Start of scan area in mm (x) */ SANE_FIX (16.0), /* Start of scan area in mm (y) */ SANE_FIX (215.9), /* Size of scan area in mm (x) */ SANE_FIX (297.2), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CIS_XP200, DAC_AD_XP200, /* Analog Device frontend */ GPO_XP200, MOTOR_XP200, GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 120, 0, // shading_ta_lines 132 }; static Genesys_Model hp3670c_model = { "hewlett-packard-scanjet-3670c", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet 3670c", /* Device model name */ MODEL_HP_SCANJET_3670C, GENESYS_GL646, NULL, {1200, 600, 300, 150, 100, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (8.5), /* Start of scan area in mm (x) */ SANE_FIX (11.0), /* Start of scan area in mm (y) */ SANE_FIX (215.9), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (104.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (55.6), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (25.6), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (78.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (76.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_HP3670, DAC_WOLFSON_HP3670, GPO_HP3670, MOTOR_HP3670, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_XPA | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_SCAN_SW, 20, 0, // shading_ta_lines 200 }; static Genesys_Model plustek_st12_model = { "plustek-opticpro-st12", /* Name */ "Plustek", /* Device vendor string */ "OpticPro ST12", /* Device model name */ MODEL_PLUSTEK_OPTICPRO_ST12, GENESYS_GL646, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (3.5), /* Start of scan area in mm (x) */ SANE_FIX (7.5), /* Start of scan area in mm (y) */ SANE_FIX (218.0), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_ST12, DAC_WOLFSON_ST12, GPO_ST12, MOTOR_UMAX, GENESYS_FLAG_UNTESTED | GENESYS_FLAG_14BIT_GAMMA, /* Which flags are needed for this scanner? */ GENESYS_HAS_NO_BUTTONS, /* no buttons supported */ 20, 0, // shading_ta_lines 200 }; static Genesys_Model plustek_st24_model = { "plustek-opticpro-st24", /* Name */ "Plustek", /* Device vendor string */ "OpticPro ST24", /* Device model name */ MODEL_PLUSTEK_OPTICPRO_ST24, GENESYS_GL646, NULL, {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */ {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (3.5), /* Start of scan area in mm (x) */ SANE_FIX (7.5), /* Start of scan area in mm (y) */ SANE_FIX (218.0), /* Size of scan area in mm (x) */ SANE_FIX (299.0), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (1.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 8, 16, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_ST24, DAC_WOLFSON_ST24, GPO_ST24, MOTOR_ST24, GENESYS_FLAG_UNTESTED | GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_OFFSET_CALIBRATION, GENESYS_HAS_NO_BUTTONS, /* no buttons supported */ 20, 0, // shading_ta_lines 200 }; static Genesys_Model medion_md5345_model = { "medion-md5345-model", /* Name */ "Medion", /* Device vendor string */ "MD5345/MD6228/MD6471", /* Device model name */ MODEL_MEDION_MD5345, GENESYS_GL646, NULL, {1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */ {2400, 1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX ( 0.30), /* Start of scan area in mm (x) */ SANE_FIX ( 0.80), /* 2.79 < Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (296.4), /* Size of scan area in mm (y) */ SANE_FIX (0.00), /* Start of white strip in mm (y) */ SANE_FIX (0.00), /* Start of black mark in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_5345, DAC_WOLFSON_5345, GPO_5345, MOTOR_5345, GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_SHADING_NO_MOVE | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_POWER_SW | GENESYS_HAS_OCR_SW | GENESYS_HAS_SCAN_SW, 40, 0, // shading_ta_lines 200 }; static Genesys_Model visioneer_xp300_model = { "visioneer-strobe-xp300", /* Name */ "Visioneer", /* Device vendor string */ "Strobe XP300", /* Device model name */ MODEL_VISIONEER_STROBE_XP300, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (1.0), /* Start of scan area in mm (y) */ SANE_FIX (435.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (26.5), /* Size of scan area after paper sensor stops sensing document in mm */ /* this is larger than needed -- accounts for second sensor head, which is a calibration item */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_XP300, DAC_WOLFSON_XP300, GPO_XP300, MOTOR_XP300, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model syscan_docketport_665_model = { "syscan-docketport-665", /* Name */ "Syscan/Ambir", /* Device vendor string */ "DocketPORT 665", /* Device model name */ MODEL_SYSCAN_DOCKETPORT_665, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (108.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (17.5), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_DP665, DAC_WOLFSON_XP300, GPO_DP665, MOTOR_DP665, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model visioneer_roadwarrior_model = { "visioneer-roadwarrior", /* Name */ "Visioneer", /* Device vendor string */ "Readwarrior", /* Device model name */ MODEL_VISIONEER_ROADWARRIOR, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_ROADWARRIOR, DAC_WOLFSON_XP300, GPO_DP665, MOTOR_ROADWARRIOR, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model syscan_docketport_465_model = { "syscan-docketport-465", /* Name */ "Syscan", /* Device vendor string */ "DocketPORT 465", /* Device model name */ MODEL_SYSCAN_DOCKETPORT_465, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_ROADWARRIOR, DAC_WOLFSON_XP300, GPO_DP665, MOTOR_ROADWARRIOR, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_NO_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_UNTESTED, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW, 300, 0, // shading_ta_lines 400 }; static Genesys_Model visioneer_xp100_r3_model = { "visioneer-xp100-revision3", /* Name */ "Visioneer", /* Device vendor string */ "XP100 Revision 3", /* Device model name */ MODEL_VISIONEER_STROBE_XP100_REVISION3, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_ROADWARRIOR, DAC_WOLFSON_XP300, GPO_DP665, MOTOR_ROADWARRIOR, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model pentax_dsmobile_600_model = { "pentax-dsmobile-600", /* Name */ "Pentax", /* Device vendor string */ "DSmobile 600", /* Device model name */ MODEL_PENTAX_DSMOBILE_600, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_DSMOBILE600, DAC_WOLFSON_DSM600, GPO_DP665, MOTOR_DSMOBILE_600, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model syscan_docketport_467_model = { "syscan-docketport-467", /* Name */ "Syscan", /* Device vendor string */ "DocketPORT 467", /* Device model name */ MODEL_SYSCAN_DOCKETPORT_467, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_DSMOBILE600, DAC_WOLFSON_DSM600, GPO_DP665, MOTOR_DSMOBILE_600, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model syscan_docketport_685_model = { "syscan-docketport-685", /* Name */ "Syscan/Ambir", /* Device vendor string */ "DocketPORT 685", /* Device model name */ MODEL_SYSCAN_DOCKETPORT_685, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (1.0), /* Start of scan area in mm (y) */ SANE_FIX (212.0), /* Size of scan area in mm (x) */ SANE_FIX (500), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (26.5), /* Size of scan area after paper sensor stops sensing document in mm */ /* this is larger than needed -- accounts for second sensor head, which is a calibration item */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_DP685, DAC_WOLFSON_DSM600, GPO_DP685, MOTOR_XP300, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model syscan_docketport_485_model = { "syscan-docketport-485", /* Name */ "Syscan/Ambir", /* Device vendor string */ "DocketPORT 485", /* Device model name */ MODEL_SYSCAN_DOCKETPORT_485, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (1.0), /* Start of scan area in mm (y) */ SANE_FIX (435.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (26.5), /* Size of scan area after paper sensor stops sensing document in mm */ /* this is larger than needed -- accounts for second sensor head, which is a calibration item */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_XP300, DAC_WOLFSON_XP300, GPO_XP300, MOTOR_XP300, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model dct_docketport_487_model = { "dct-docketport-487", /* Name */ "DCT", /* Device vendor string */ "DocketPORT 487", /* Device model name */ MODEL_DCT_DOCKETPORT_487, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.0), /* Start of scan area in mm (x) */ SANE_FIX (1.0), /* Start of scan area in mm (y) */ SANE_FIX (435.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (26.5), /* Size of scan area after paper sensor stops sensing document in mm */ /* this is larger than needed -- accounts for second sensor head, which is a calibration item */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_XP300, DAC_WOLFSON_XP300, GPO_XP300, MOTOR_XP300, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_UNTESTED, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model visioneer_7100_model = { "visioneer-7100-model", /* Name */ "Visioneer", /* Device vendor string */ "OneTouch 7100", /* Device model name */ MODEL_VISIONEER_7100, GENESYS_GL646, NULL, {1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */ {2400, 1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX ( 4.00), /* Start of scan area in mm (x) */ SANE_FIX ( 0.80), /* 2.79 < Start of scan area in mm (y) */ SANE_FIX (215.9), /* Size of scan area in mm (x) */ SANE_FIX (296.4), /* Size of scan area in mm (y) */ SANE_FIX (0.00), /* Start of white strip in mm (y) */ SANE_FIX (0.00), /* Start of black mark in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ /* 48, 24, 0, */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_5345, DAC_WOLFSON_5345, GPO_5345, MOTOR_5345, GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_POWER_SW | GENESYS_HAS_OCR_SW | GENESYS_HAS_SCAN_SW, 40, 0, // shading_ta_lines 200 }; static Genesys_Model xerox_2400_model = { "xerox-2400-model", /* Name */ "Xerox", /* Device vendor string */ "OneTouch 2400", /* Device model name */ MODEL_XEROX_2400, GENESYS_GL646, NULL, {1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */ {2400, 1200, 600, 400, 300, 200, 150, 100, 75, 50, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX ( 4.00), /* Start of scan area in mm (x) */ SANE_FIX ( 0.80), /* 2.79 < Start of scan area in mm (y) */ SANE_FIX (215.9), /* Size of scan area in mm (x) */ SANE_FIX (296.4), /* Size of scan area in mm (y) */ SANE_FIX (0.00), /* Start of white strip in mm (y) */ SANE_FIX (0.00), /* Start of black mark in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.00), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.00), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 48, 24, 0, /* RGB CCD Line-distance correction in pixel */ /* 48, 24, 0, */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_5345, DAC_WOLFSON_5345, GPO_5345, MOTOR_5345, GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_COPY_SW | GENESYS_HAS_EMAIL_SW | GENESYS_HAS_POWER_SW | GENESYS_HAS_OCR_SW | GENESYS_HAS_SCAN_SW, 40, 0, // shading_ta_lines 200 }; static Genesys_Model xerox_travelscanner_model = { "xerox-travelscanner", /* Name */ "Xerox", /* Device vendor string */ "Travelscanner 100", /* Device model name */ MODEL_XEROX_TRAVELSCANNER_100, GENESYS_GL841, NULL, {600, 300, 150, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (4.0), /* Start of scan area in mm (x) */ SANE_FIX (0.0), /* Start of scan area in mm (y) */ SANE_FIX (220.0), /* Size of scan area in mm (x) */ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (16.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_TRUE, /* Is this a CIS scanner? */ SANE_TRUE, /* Is this a sheetfed scanner? */ CCD_ROADWARRIOR, DAC_WOLFSON_XP300, GPO_DP665, MOTOR_ROADWARRIOR, GENESYS_FLAG_LAZY_INIT /* Which flags are needed for this scanner? */ | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_DARK_CALIBRATION, GENESYS_HAS_SCAN_SW | GENESYS_HAS_PAGE_LOADED_SW | GENESYS_HAS_CALIBRATE, 100, 0, // shading_ta_lines 400 }; static Genesys_Model plustek_3600_model = { "plustek-opticbook-3600", /* Name */ "PLUSTEK", /* Device vendor string */ "OpticBook 3600", /* Device model name */ MODEL_PLUSTEK_OPTICPRO_3600, GENESYS_GL841, NULL, {/*1200,*/ 600, 400, 300, 200, 150, 100, 75, 0}, /* possible x-resolutions */ {/*2400,*/ 1200, 600, 400, 300, 200, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (0.42),/*SANE_FIX (0.42), Start of scan area in mm (x) */ SANE_FIX (6.75),/*SANE_FIX (7.9), Start of scan area in mm (y) */ SANE_FIX (216.0),/*SANE_FIX (216.0), Size of scan area in mm (x) */ SANE_FIX (297.0),/*SANE_FIX (297.0), Size of scan area in mm (y) */ SANE_FIX (0.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_PLUSTEK_3600, DAC_PLUSTEK_3600, GPO_PLUSTEK_3600, MOTOR_PLUSTEK_3600, GENESYS_FLAG_UNTESTED /* not fully working yet */ | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_LAZY_INIT,/* | GENESYS_FLAG_NO_CALIBRATION,*/ GENESYS_HAS_NO_BUTTONS, 7, 0, // shading_ta_lines 200 }; static Genesys_Model hpn6310_model = { "hewlett-packard-scanjet-N6310", /* Name */ "Hewlett Packard", /* Device vendor string */ "ScanJet N6310", /* Device model name */ MODEL_HP_SCANJET_N6310, GENESYS_GL847, NULL, { 2400, 1200, 600, 400, 300, 200, 150, 100, 75, 0}, { 2400, 1200, 600, 400, 300, 200, 150, 100, 75, 0}, {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (6), /* Start of scan area in mm (x) */ SANE_FIX (2), /* Start of scan area in mm (y) */ SANE_FIX (216), /* Size of scan area in mm (x) 5148 pixels at 600 dpi*/ SANE_FIX (511), /* Size of scan area in mm (y) */ SANE_FIX (3.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 0, 0, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_HP_N6310, DAC_CANONLIDE200, /*Not defined yet for N6310 */ GPO_HP_N6310, MOTOR_CANONLIDE200, /*Not defined yet for N6310 */ GENESYS_FLAG_UNTESTED /* not fully working yet */ | GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_14BIT_GAMMA | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_NO_CALIBRATION, GENESYS_HAS_NO_BUTTONS, 100, 0, // shading_ta_lines 100 }; static Genesys_Model plustek_3800_model = { "plustek-opticbook-3800", /* Name */ "PLUSTEK", /* Device vendor string */ "OpticBook 3800", /* Device model name */ MODEL_PLUSTEK_OPTICBOOK_3800, GENESYS_GL845, NULL, {1200, 600, 300, 150, 100, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (7.2), /* Start of scan area in mm (x) */ SANE_FIX (14.7), /* Start of scan area in mm (y) */ SANE_FIX (217.7), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (9.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_PLUSTEK3800, DAC_PLUSTEK3800, GPO_PLUSTEK3800, MOTOR_PLUSTEK3800, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_NO_BUTTONS, /* TODO there are 4 buttons to support */ 100, 0, // shading_ta_lines 100 }; static Genesys_Model canon_formula101_model = { "canon-image-formula-101", /* Name */ "Canon", /* Device vendor string */ "Image Formula 101", /* Device model name */ MODEL_CANON_IMAGE_FORMULA_101, GENESYS_GL846, NULL, {1200, 600, 300, 150, 100, 75, 0}, /* possible x-resolutions */ {1200, 600, 300, 150, 100, 75, 0}, /* possible y-resolutions */ {16, 8, 0}, /* possible depths in gray mode */ {16, 8, 0}, /* possible depths in color mode */ SANE_FIX (7.2), /* Start of scan area in mm (x) */ SANE_FIX (14.7), /* Start of scan area in mm (y) */ SANE_FIX (217.7), /* Size of scan area in mm (x) */ SANE_FIX (300.0), /* Size of scan area in mm (y) */ SANE_FIX (9.0), /* Start of white strip in mm (y) */ SANE_FIX (0.0), /* Start of black mark in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (x) */ SANE_FIX (0.0), /* Size of scan area in TA mode in mm (y) */ SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */ SANE_FIX (0.0), /* Size of scan area after paper sensor stops sensing document in mm */ SANE_FIX (0.0), /* Amount of feeding needed to eject document after finishing scanning in mm */ 0, 24, 48, /* RGB CCD Line-distance correction in pixel */ COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */ SANE_FALSE, /* Is this a CIS scanner? */ SANE_FALSE, /* Is this a sheetfed scanner? */ CCD_IMG101, DAC_IMG101, GPO_IMG101, MOTOR_IMG101, GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SKIP_WARMUP | GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_CUSTOM_GAMMA, GENESYS_HAS_NO_BUTTONS , 100, 0, // shading_ta_lines 100 }; static Genesys_USB_Device_Entry genesys_usb_device_list[] = { /* GL646 devices */ {0x03f0, 0x0901, &hp2300c_model}, {0x03f0, 0x0a01, &hp2400c_model}, {0x03f0, 0x1405, &hp3670c_model}, {0x0461, 0x0377, &medion_md5345_model}, {0x04a7, 0x0229, &visioneer_7100_model}, {0x0461, 0x038b, &xerox_2400_model}, {0x04a7, 0x0426, &visioneer_xp200_model}, {0x0638, 0x0a10, &umax_astra_4500_model}, {0x07b3, 0x0600, &plustek_st12_model}, {0x07b3, 0x0601, &plustek_st24_model}, /* GL841 devices */ {0x04a7, 0x0474, &visioneer_xp300_model}, {0x04a7, 0x0494, &visioneer_roadwarrior_model}, {0x04a7, 0x049b, &visioneer_xp100_r3_model}, {0x04a7, 0x04ac, &xerox_travelscanner_model}, {0x04a9, 0x2213, &canon_lide_50_model}, {0x04a9, 0x221c, &canon_lide_60_model}, {0x04a9, 0x2214, &canon_lide_80_model}, {0x07b3, 0x0900, &plustek_3600_model}, {0x0a17, 0x3210, &pentax_dsmobile_600_model}, {0x04f9, 0x2038, &pentax_dsmobile_600_model}, /* clone, only usb id is different */ {0x0a82, 0x4800, &syscan_docketport_485_model}, {0x0a82, 0x4802, &syscan_docketport_465_model}, {0x0a82, 0x4803, &syscan_docketport_665_model}, {0x0a82, 0x480c, &syscan_docketport_685_model}, {0x1dcc, 0x4810, &dct_docketport_487_model}, {0x1dcc, 0x4812, &syscan_docketport_467_model}, /* GL843 devices */ {0x04da, 0x100f, &panasonic_kvss080_model}, {0x03f0, 0x1b05, &hp4850c_model}, {0x03f0, 0x4505, &hpg4010_model}, {0x03f0, 0x4605, &hpg4050_model}, {0x04a9, 0x2228, &canon_4400f_model}, {0x04a9, 0x221e, &canon_8400f_model}, {0x04a9, 0x2229, &canon_8600f_model}, /* GL845 devices */ {0x07b3, 0x1300, &plustek_3800_model}, /* GL846 devices */ {0x1083, 0x162e, &canon_formula101_model}, /* GL847 devices */ {0x04a9, 0x1904, &canon_lide_100_model}, {0x04a9, 0x1905, &canon_lide_200_model}, {0x04a9, 0x1906, &canon_5600f_model}, {0x04a9, 0x1907, &canon_lide_700f_model}, {0x03f0, 0x4705, &hpn6310_model}, /* GL124 devices */ {0x04a9, 0x1909, &canon_lide_110_model}, {0x04a9, 0x190e, &canon_lide_120_model}, {0x04a9, 0x190a, &canon_lide_210_model}, {0x04a9, 0x190f, &canon_lide_220_model}, {0, 0, NULL} }; #define MAX_SCANNERS (sizeof(genesys_usb_device_list) / \ sizeof(genesys_usb_device_list[0]))