/* sane - Scanner Access Now Easy.
Copyright (C) 2002-2003 Frank Zago (sane at zago dot net)
Copyright (C) 2003-2008 Gerard Klaver (gerard at gkall dot hobby dot nl)
This file is part of the SANE package.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
As a special exception, the authors of SANE give permission for
additional uses of the libraries contained in this release of SANE.
The exception is that, if you link a SANE library with other files
to produce an executable, this does not by itself cause the
resulting executable to be covered by the GNU General Public
License. Your use of that executable is in no way restricted on
account of linking the SANE library code into it.
This exception does not, however, invalidate any other reasons why
the executable file might be covered by the GNU General Public
License.
If you submit changes to SANE to the maintainers to be included in
a subsequent release, you agree by submitting the changes that
those changes may be distributed with this exception intact.
If you write modifications of your own for SANE, it is your choice
whether to permit this exception to apply to your modifications.
If you do not wish that, delete this exception notice.
*/
/*
TECO scanner VM3575, VM656A, VM6575, VM6586, VM356A, VM3564
update 2003/02/14, Patch for VM356A Gerard Klaver
update 2003/03/19, traces, tests VM356A Gerard Klaver, Michael Hoeller
update 2003/07/19, white level calibration, color modes VM3564, VM356A, VM3575
Gerard Klaver, Michael Hoeller
update 2004/01/15, white level , red, green, and blue calibration and
leave out highest and lowest value and then divide
VM3564, VM356A and VM3575: Gerard Klaver
update 2004/08/04, white level, red, green and blue calibration for the VM6575
changed default SANE_TECO_CAL_ALGO to 1 for VM3564 and VM6575
preview value changed to 75 dpi for VM6575
leave out highest and lowest value and then divide
VM656A, VM6586
update 2004/08/05, use of SANE_VALUE_SCAN_MODE_LINEART, _GRAY, and _COLOR,
changed use of %d to %ld (when bytes values are displayed)
update 2005/03/04, use of __sane_unused__
update 2005/07/29. Removed using teco_request_sense (dev) routine for VM3564
update 2008/01/12, Update teco_request_sense routine due to no
init value for size.
*/
/*--------------------------------------------------------------------------*/
#define BUILD 10 /* 2008/01/12 */
#define BACKEND_NAME teco2
#define TECO2_CONFIG_FILE "teco2.conf"
/*--------------------------------------------------------------------------*/
#include "../include/sane/config.h"
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "../include/sane/sane.h"
#include "../include/sane/sanei.h"
#include "../include/sane/saneopts.h"
#include "../include/sane/sanei_scsi.h"
#include "../include/sane/sanei_debug.h"
#include "../include/sane/sanei_backend.h"
#include "../include/sane/sanei_config.h"
#include "../include/lassert.h"
#include "teco2.h"
/* This is used to debug the backend without having the real hardware. */
#undef sim
#ifdef sim
#define sanei_scsi_cmd2(a, b, c, d, e, f, g) SANE_STATUS_GOOD
#define sanei_scsi_open(a, b, c, d) 0
#define sanei_scsi_cmd(a, b, c, d, e) SANE_STATUS_GOOD
#define sanei_scsi_close(a) SANE_STATUS_GOOD
#endif
/* For debugging purposes: output a stream straight out from the
* scanner without reordering the colors, 0=normal, 1 = raw. */
static int raw_output = 0;
/*--------------------------------------------------------------------------*/
/* Lists of possible scan modes. */
static SANE_String_Const scan_mode_list[] = {
SANE_VALUE_SCAN_MODE_LINEART,
SANE_VALUE_SCAN_MODE_GRAY,
SANE_VALUE_SCAN_MODE_COLOR,
NULL
};
/*--------------------------------------------------------------------------*/
/* List of color dropout. */
static SANE_String_Const filter_color_list[] = {
"Red",
"Green",
"Blue",
NULL
};
static const int filter_color_val[] = {
0,
1,
2
};
/*--------------------------------------------------------------------------*/
/* List of dithering options. */
static SANE_String_Const dither_list[] = {
"Line art",
"2x2",
"3x3",
"4x4 bayer",
"4x4 smooth",
"8x8 bayer",
"8x8 smooth",
"8x8 horizontal",
"8x8 vertical",
NULL
};
static const int dither_val[] = {
0x00,
0x01,
0x02,
0x03,
0x04,
0x05,
0x06,
0x07,
0x08
};
/*--------------------------------------------------------------------------*/
static const SANE_Range threshold_range = {
0, /* minimum */
255, /* maximum */
0 /* quantization */
};
/*--------------------------------------------------------------------------*/
static const SANE_Range red_level_range = {
0, /* minimum */
64, /* maximum */
1 /* quantization */
};
/*--------------------------------------------------------------------------*/
static const SANE_Range green_level_range = {
0, /* minimum */
64, /* maximum */
1 /* quantization */
};
/*--------------------------------------------------------------------------*/
static const SANE_Range blue_level_range = {
0, /* minimum */
64, /* maximum */
1 /* quantization */
};
/*--------------------------------------------------------------------------*/
/* Gamma range */
static const SANE_Range gamma_range = {
0, /* minimum */
255, /* 255 maximum */
0 /* quantization */
};
/*--------------------------------------------------------------------------*/
static const struct dpi_color_adjust vm3564_dpi_color_adjust[] = {
/*dpi, color sequence R G or B, 0 (-) or 1 (+) color skewing, lines skewing */
{25, 1, 0, 2, 0, 0},
{50, 1, 2, 0, 0, 1},
{75, 1, 0, 2, 1, 1},
{150, 1, 0, 2, 1, 2},
{225, 1, 0, 2, 1, 3},
{300, 1, 0, 2, 1, 4},
{375, 1, 0, 2, 1, 5},
{450, 1, 0, 2, 1, 6},
{525, 1, 0, 2, 1, 7},
{600, 1, 0, 2, 1, 8},
/* must be the last entry */
{0, 0, 0, 0, 0, 0}
};
/* Used for VM356A only */
static const struct dpi_color_adjust vm356a_dpi_color_adjust[] = {
/* All values with ydpi > 300 result in a wrong proportion for */
/* the scan. The proportion can be adjusted with the following */
/* command: convert -geometry (dpi/max_xdpi * 100%)x100% */
/* max_xdpi is for the vm356a constant with 300 dpi */
/* e.g. 600dpi adjust with: convert -geometry 200%x100% */
/* All resolutions in increments of 25 are testede, only the shown */
/* bring back good results */
/*dpi, color sequence R G or B, 0 (-) or 1 (+) color skewing, lines skewing */
{25, 1, 0, 2, 0, 0},
{50, 1, 2, 0, 0, 1},
{75, 1, 0, 2, 1, 1},
{150, 1, 0, 2, 1, 2},
{225, 1, 0, 2, 1, 3},
{300, 1, 0, 2, 1, 4},
{375, 1, 0, 2, 1, 5},
{450, 1, 0, 2, 1, 6},
{525, 1, 0, 2, 1, 7},
{600, 1, 0, 2, 1, 8},
/* must be the last entry */
{0, 0, 0, 0, 0, 0}
};
/* Used for the VM3575 only */
static const struct dpi_color_adjust vm3575_dpi_color_adjust[] = {
/* All values with ydpi > 300 result in a wrong proportion for */
/* the scan. The proportion can be adjusted with the following */
/* command: convert -geometry (dpi/max_xdpi * 100%)x100% */
/* max_xdpi is for the vm3575 constant with 300 dpi */
/* e.g. 600dpi adjust with: convert -geometry 200%x100% */
{50, 2, 0, 1, 1, 1},
{60, 2, 1, 0, 0, 2},
/* {75, 2, 0, 1, 1, 2}, NOK, effects in scan, also with twain driver*/
{100, 2, 1, 0, 0, 3},
{120, 2, 0, 1, 1, 3},
{150, 2, 0, 1, 1, 4},
/* {180, 2, 1, 0, 0, 4}, NOK, skewing problem*/
{225, 2, 0, 1, 1, 6},
{300, 2, 0, 1, 1, 8},
{375, 2, 0, 1, 1, 10},
{450, 2, 0, 1, 1, 12},
{525, 2, 0, 1, 1, 14},
{600, 2, 0, 1, 1, 16},
/* must be the last entry */
{0, 0, 0, 0, 0, 0}
};
static const struct dpi_color_adjust vm656a_dpi_color_adjust[1] = {
{0, 0, 1, 2, 0, 0}
};
static const struct dpi_color_adjust vm6575_dpi_color_adjust[] = {
{75, 1, 0, 2, 1, 1},
{150, 1, 0, 2, 1, 2},
{300, 1, 0, 2, 1, 4},
{600, 1, 0, 2, 1, 8},
};
static const struct dpi_color_adjust vm6586_dpi_color_adjust[] = {
{25, 1, 0, 2, 1, 0},
{40, 1, 0, 2, 1, 0},
{50, 1, 0, 2, 1, 0},
{75, 1, 2, 0, 0, 1},
{150, 1, 0, 2, 1, 1},
{160, 1, 0, 2, 1, 1},
{175, 1, 0, 2, 1, 1},
{180, 1, 0, 2, 1, 1},
{300, 1, 0, 2, 1, 2},
{320, 1, 0, 2, 1, 2},
{325, 1, 0, 2, 1, 2},
{450, 1, 0, 2, 1, 3},
{460, 1, 0, 2, 1, 3},
{600, 1, 0, 2, 1, 4},
{620, 1, 0, 2, 1, 6},
{625, 1, 0, 2, 1, 6},
{750, 1, 0, 2, 1, 12},
{760, 1, 0, 2, 1, 12},
{900, 1, 0, 2, 1, 12},
{1050, 1, 0, 2, 1, 15},
{1200, 1, 0, 2, 1, 15},
/* must be the last entry */
{0, 0, 0, 0, 0, 0}
};
/* For all scanners. Must be reasonable (eg. between 50 and 300) and
* appear in the ...._dpi_color_adjust list of all supported scanners. */
#define DEF_RESOLUTION 150
/*--------------------------------------------------------------------------*/
/* Define the supported scanners and their characteristics. */
static const struct scanners_supported scanners[] = {
{6, "TECO VM3564",
TECO_VM3564,
"Relisys", "AVEC II S3",
{1, 600, 1}, /* resolution */
300, 600, /* max x and Y resolution */
2550, 12, 3, 1, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm3564_dpi_color_adjust},
{6, "TECO VM356A",
TECO_VM356A,
"Relisys", "APOLLO Express 3",
{1, 600, 1}, /* resolution */
300, 600, /* max x and Y resolution */
2550, 12, 3, 1, /* calibration */
/* dots/inch * x-length, calibration samples, tot.bytes for 3 colors, default SANE_TECO2_CAL_ALGO value */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm356a_dpi_color_adjust},
{6, "TECO VM356A",
TECO_VM356A,
"Primax", "Jewel 4800",
{1, 600, 1}, /* resolution */
300, 600, /* max x and Y resolution */
2550, 12, 3, 1, /* calibration */
/* dots/inch * x-length, calibration samples, tot.bytes for 3 colors, default SANE_TECO2_CAL_ALGO value */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm356a_dpi_color_adjust},
{6, "TECO VM3575",
TECO_VM3575,
"Relisys", "SCORPIO Super 3",
{1, 600, 1}, /* resolution */
300, 600, /* max x and Y resolution */
2550, 12, 6, 1, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm3575_dpi_color_adjust},
{6, "TECO VM3575",
TECO_VM3575,
"Relisys", "AVEC Super 3",
{1, 600, 1}, /* resolution */
300, 600, /* max x and Y resolution */
2550, 12, 6, 1, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm3575_dpi_color_adjust},
{6, "TECO VM656A",
TECO_VM656A,
"Relisys", "APOLLO Express 6",
{1, 600, 1}, /* resolution */
600, 1200, /* max x and Y resolution */
5100, 8, 6, 0, /* calibration */
{SANE_FIX (0), SANE_FIX (210), 0},
{SANE_FIX (0), SANE_FIX (297), 0},
vm656a_dpi_color_adjust},
{6, "TECO VM6575",
TECO_VM6575,
"Relisys", "SCORPIO Pro",
{1, 600, 1}, /* resolution */
600, 1200, /* max x and Y resolution */
5100, 8, 6, 1, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm6575_dpi_color_adjust},
{6, "TECO VM6575",
TECO_VM6575,
"Primax", "Profi 9600",
{1, 600, 1}, /* resolution */
600, 1200, /* max x and Y resolution */
5100, 8, 6, 1, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm6575_dpi_color_adjust},
{6, "TECO VM6586",
TECO_VM6586,
"Relisys", "SCORPIO Pro-S",
{1, 600, 1}, /* resolution */
600, 1200, /* max x and Y resolution */
5100, 8, 6, 0, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm6586_dpi_color_adjust},
{6, "TECO VM6586",
TECO_VM6586,
"Primax", "Profi 19200",
{1, 600, 1}, /* resolution */
600, 1200, /* max x and Y resolution */
5100, 8, 6, 0, /* calibration */
{SANE_FIX (0), SANE_FIX (8.5 * MM_PER_INCH), 0},
{SANE_FIX (0), SANE_FIX (11.7 * MM_PER_INCH), 0},
vm6586_dpi_color_adjust}
};
/*--------------------------------------------------------------------------*/
/* List of scanner attached. */
static Teco_Scanner *first_dev = NULL;
static int num_devices = 0;
static const SANE_Device **devlist = NULL;
/* Local functions. */
/* Display a buffer in the log. Display by lines of 16 bytes. */
static void
hexdump (int level, const char *comment, unsigned char *buf, const int length)
{
int i;
char line[128];
char *ptr;
char asc_buf[17];
char *asc_ptr;
DBG (level, " %s\n", comment);
i = 0;
goto start;
do
{
if (i < length)
{
ptr += sprintf (ptr, " %2.2x", *buf);
if (*buf >= 32 && *buf <= 127)
{
asc_ptr += sprintf (asc_ptr, "%c", *buf);
}
else
{
asc_ptr += sprintf (asc_ptr, ".");
}
}
else
{
/* After the length; do nothing. */
ptr += sprintf (ptr, " ");
}
i++;
buf++;
if ((i % 16) == 0)
{
/* It's a new line */
DBG (level, " %s %s\n", line, asc_buf);
start:
ptr = line;
*ptr = '\0';
asc_ptr = asc_buf;
*asc_ptr = '\0';
ptr += sprintf (ptr, " %3.3d:", i);
}
}
while (i < ((length + 15) & ~15));
}
/* Returns the length of the longest string, including the terminating
* character. */
static size_t
max_string_size (SANE_String_Const strings[])
{
size_t size, max_size = 0;
int i;
for (i = 0; strings[i]; ++i)
{
size = strlen (strings[i]) + 1;
if (size > max_size)
{
max_size = size;
}
}
return max_size;
}
/* Lookup a string list from one array and return its index. */
static int
get_string_list_index (SANE_String_Const list[], SANE_String_Const name)
{
int index;
index = 0;
while (list[index] != NULL)
{
if (strcmp (list[index], name) == 0)
{
return (index);
}
index++;
}
DBG (DBG_error, "name %s not found in list\n", name);
assert (0); /* bug in backend, core dump */
return (-1);
}
/* Initialize a scanner entry. Return an allocated scanner with some
* preset values. */
static Teco_Scanner *
teco_init (void)
{
Teco_Scanner *dev;
DBG (DBG_proc, "teco_init: enter\n");
/* Allocate a new scanner entry. */
dev = malloc (sizeof (Teco_Scanner));
if (dev == NULL)
{
return NULL;
}
memset (dev, 0, sizeof (Teco_Scanner));
/* Allocate the buffer used to transfer the SCSI data. */
dev->buffer_size = 64 * 1024;
dev->buffer = malloc (dev->buffer_size);
if (dev->buffer == NULL)
{
free (dev);
return NULL;
}
dev->sfd = -1;
DBG (DBG_proc, "teco_init: exit\n");
return (dev);
}
/* Closes an open scanner. */
static void
teco_close (Teco_Scanner * dev)
{
DBG (DBG_proc, "teco_close: enter\n");
if (dev->sfd != -1)
{
sanei_scsi_close (dev->sfd);
dev->sfd = -1;
}
DBG (DBG_proc, "teco_close: exit\n");
}
/* Frees the memory used by a scanner. */
static void
teco_free (Teco_Scanner * dev)
{
int i;
DBG (DBG_proc, "teco_free: enter\n");
if (dev == NULL)
return;
teco_close (dev);
if (dev->devicename)
{
free (dev->devicename);
}
if (dev->buffer)
{
free (dev->buffer);
}
for (i = 1; i < OPT_NUM_OPTIONS; i++)
{
if (dev->opt[i].type == SANE_TYPE_STRING && dev->val[i].s)
{
free (dev->val[i].s);
}
}
if (dev->resolutions_list)
free (dev->resolutions_list);
free (dev);
DBG (DBG_proc, "teco_free: exit\n");
}
/* Inquiry a device and returns TRUE if is supported. */
static int
teco_identify_scanner (Teco_Scanner * dev)
{
CDB cdb;
SANE_Status status;
size_t size;
int i;
DBG (DBG_proc, "teco_identify_scanner: enter\n");
size = 5;
MKSCSI_INQUIRY (cdb, size);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
if (status)
{
DBG (DBG_error,
"teco_identify_scanner: inquiry failed with status %s\n",
sane_strstatus (status));
return (SANE_FALSE);
}
size = dev->buffer[4] + 5; /* total length of the inquiry data */
#ifndef sim
if (size < 53)
{
DBG (DBG_error,
"teco_identify_scanner: not enough data to identify device\n");
return (SANE_FALSE);
}
#endif
#ifdef sim
{
#if 0
/* vm3564 */
unsigned char table[] = {
0x06, 0x00, 0x02, 0x02, 0x43, 0x00, 0x00, 0x10, 0x52, 0x45,
0x4c, 0x49, 0x53, 0x59, 0x53, 0x20, 0x41, 0x56, 0x45, 0x43,
0x20, 0x49, 0x49, 0x20, 0x53, 0x33, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x31, 0x2e, 0x30, 0x37, 0x31, 0x2e, 0x30, 0x37,
0x00, 0x01, 0x54, 0x45, 0x43, 0x4f, 0x20, 0x56, 0x4d, 0x33,
0x35, 0x36, 0x34, 0x20, 0x00, 0x01, 0x01, 0x2c, 0x00, 0x01,
0x02, 0x58, 0x09, 0xf6, 0x0d, 0xaf, 0x01, 0x2c, 0x00, 0x08,
0x01, 0x00
};
#endif
#if 0
/* vm356A */
unsigned char table[] = {
0x06, 0x00, 0x02, 0x02, 0x43, 0x00, 0x00, 0x10, 0x50, 0x72,
0x69, 0x6d, 0x61, 0x78, 0x20, 0x20, 0x4a, 0x65, 0x77, 0x65,
0x6c, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x31, 0x2e, 0x30, 0x30, 0x31, 0x2e, 0x30, 0x30,
0x00, 0x01, 0x54, 0x45, 0x43, 0x4f, 0x20, 0x56, 0x4d, 0x33,
0x35, 0x36, 0x41, 0x20, 0x00, 0x01, 0x01, 0x2c, 0x00, 0x01,
0x02, 0x58, 0x09, 0xf6, 0x0d, 0xaf, 0x01, 0x2c, 0x00, 0x08,
0x10, 0x00
};
#endif
#if 1
/* vm3575 */
unsigned char table[] = {
0x06, 0x00, 0x02, 0x02, 0x43, 0x00, 0x00, 0x00, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x46, 0x6c, 0x61, 0x74,
0x62, 0x65, 0x64, 0x20, 0x53, 0x63, 0x61, 0x6e, 0x6e, 0x65,
0x72, 0x20, 0x31, 0x2e, 0x30, 0x33, 0x31, 0x2e, 0x30, 0x33,
0x00, 0x01, 0x54, 0x45, 0x43, 0x4f, 0x20, 0x56, 0x4d, 0x33,
0x35, 0x37, 0x35, 0x20, 0x00, 0x01, 0x01, 0x2c, 0x00, 0x01,
0x02, 0x58, 0x09, 0xf6, 0x0d, 0xaf, 0x01, 0x2c, 0x00, 0x08,
0x01, 0x00
};
#endif
#if 0
/* vm6586 */
unsigned char table[] = {
0x06, 0x00, 0x02, 0x02, 0x43, 0x00, 0x00, 0x00, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x46, 0x6c, 0x61, 0x74,
0x62, 0x65, 0x64, 0x20, 0x53, 0x63, 0x61, 0x6e, 0x6e, 0x65,
0x72, 0x20, 0x33, 0x2e, 0x30, 0x31, 0x33, 0x2e, 0x30, 0x31,
0x00, 0x01, 0x54, 0x45, 0x43, 0x4f, 0x20, 0x56, 0x4d, 0x36,
0x35, 0x38, 0x36, 0x20, 0x00, 0x01, 0x01, 0x2c, 0x00, 0x01,
0x02, 0x58, 0x09, 0xf6, 0x0d, 0xaf, 0x01, 0x2c, 0x00, 0x08,
0x01, 0x00
};
#endif
#if 0
/* vm656A */
unsigned char table[] = {
0x06, 0x00, 0x02, 0x02, 0x43, 0x00, 0x00, 0x00, 0x52, 0x45,
0x4c, 0x49, 0x53, 0x59, 0x53, 0x20, 0x41, 0x50, 0x4f, 0x4c,
0x4c, 0x4f, 0x20, 0x45, 0x78, 0x70, 0x72, 0x65, 0x73, 0x73,
0x20, 0x36, 0x31, 0x2e, 0x30, 0x33, 0x31, 0x2e, 0x30, 0x33,
0x00, 0x01, 0x54, 0x45, 0x43, 0x4f, 0x20, 0x56, 0x4d, 0x36,
0x35, 0x36, 0x41, 0x00, 0x01, 0x01, 0x2c, 0x00, 0x01, 0x02,
0x58, 0x09, 0xf6, 0x0d, 0xaf, 0x01, 0x2c, 0x00, 0x08, 0x01,
0x00, 0x00
};
#endif
size = sizeof (table);
memcpy (dev->buffer, table, sizeof (table));
}
#endif
MKSCSI_INQUIRY (cdb, size);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
if (status)
{
DBG (DBG_error,
"teco_identify_scanner: inquiry failed with status %s\n",
sane_strstatus (status));
return (SANE_FALSE);
}
hexdump (DBG_info2, "inquiry", dev->buffer, size);
dev->scsi_type = dev->buffer[0] & 0x1f;
memcpy (dev->scsi_vendor, dev->buffer + 0x08, 0x08);
dev->scsi_vendor[0x08] = 0;
memcpy (dev->scsi_product, dev->buffer + 0x10, 0x010);
dev->scsi_product[0x10] = 0;
memcpy (dev->scsi_version, dev->buffer + 0x20, 0x04);
dev->scsi_version[0x04] = 0;
memcpy (dev->scsi_teco_name, dev->buffer + 0x2A, 0x0B);
dev->scsi_teco_name[0x0B] = 0;
DBG (DBG_info, "device is \"%s\" \"%s\" \"%s\" \"%s\"\n",
dev->scsi_vendor, dev->scsi_product, dev->scsi_version,
dev->scsi_teco_name);
/* Lookup through the supported scanners table to find if this
* backend supports that one. */
for (i = 0; i < NELEMS (scanners); i++)
{
if (dev->scsi_type == scanners[i].scsi_type &&
strcmp (dev->scsi_teco_name, scanners[i].scsi_teco_name) == 0)
{
DBG (DBG_error, "teco_identify_scanner: scanner supported\n");
/*patch for VM356A Jewel or Apollo text in frontend-+ others-------------- */
if (strncmp (dev->scsi_vendor, "RELISYS", 1) == 0 ||
strncmp (dev->scsi_vendor, " ", 1) == 0)
{
DBG (DBG_error,
"teco_identify_scanner: scanner detected with this teco_name and first brand/name entry in table\n");
dev->def = &(scanners[i]);
return (SANE_TRUE);
}
else
{
i++;
DBG (DBG_error,
"teco_identify_scanner: scanner detected with this teco_name and second brand/name entry in table\n");
dev->def = &(scanners[i]);
return (SANE_TRUE);
}
}
}
DBG (DBG_proc, "teco_identify_scanner: exit, device not supported\n");
return (SANE_FALSE);
}
/* Set a window. */
static SANE_Status
teco_set_window (Teco_Scanner * dev)
{
size_t size; /* significant size of window */
CDB cdb;
unsigned char window[56];
SANE_Status status;
int i;
DBG (DBG_proc, "teco_set_window: enter\n");
/* size of the whole windows block */
size = 0; /* keep gcc quiet */
switch (dev->def->tecoref)
{
case TECO_VM3575:
size = 53;
break;
case TECO_VM3564:
case TECO_VM356A:
case TECO_VM656A:
case TECO_VM6575:
case TECO_VM6586:
size = 56;
break;
default:
assert (0);
}
/* Check that window is big enough */
assert (size <= sizeof (window));
MKSCSI_SET_WINDOW (cdb, size);
memset (window, 0, size);
/* size of the windows descriptor block */
window[7] = size - 8;
/* X and Y resolution */
Ito16 (dev->x_resolution, &window[10]);
Ito16 (dev->y_resolution, &window[12]);
/* Upper Left (X,Y) */
Ito32 (dev->x_tl, &window[14]);
Ito32 (dev->y_tl, &window[18]);
/* Width and length */
Ito32 (dev->width, &window[22]);
Ito32 (dev->length, &window[26]);
/* Image Composition */
switch (dev->scan_mode)
{
case TECO_BW:
window[31] = dev->val[OPT_THRESHOLD].w;
window[33] = 0x00;
i = get_string_list_index (dither_list, dev->val[OPT_DITHER].s);
window[36] = dither_val[i];
break;
case TECO_GRAYSCALE:
window[33] = 0x02;
break;
case TECO_COLOR:
window[33] = 0x05;
break;
}
/* Depth */
window[34] = dev->depth;
/* Lamp to use */
i = get_string_list_index (filter_color_list, dev->val[OPT_FILTER_COLOR].s);
window[48] = filter_color_val[i];
/* Unknown - invariants */
window[31] = 0x80;
window[37] = 0x80;
/* Set the expected size line and number of lines. */
if (dev->def->tecoref == TECO_VM656A ||
dev->def->tecoref == TECO_VM6575 || dev->def->tecoref == TECO_VM6586)
{
switch (dev->scan_mode)
{
case TECO_BW:
case TECO_GRAYSCALE:
Ito16 (dev->params.bytes_per_line, &window[52]);
break;
case TECO_COLOR:
Ito16 (dev->params.bytes_per_line / 3, &window[52]);
break;
}
Ito16 (dev->params.lines, &window[54]);
}
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
hexdump (DBG_info2, "windows", window, size);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
window, size, NULL, NULL);
DBG (DBG_proc, "teco_set_window: exit, status=%d\n", status);
return status;
}
/* Park the CCD */
static SANE_Status
teco_reset_window (Teco_Scanner * dev)
{
SANE_Status status;
CDB cdb;
DBG (DBG_proc, "teco_reset_window: enter\n");
MKSCSI_OBJECT_POSITION (cdb, 0);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len, NULL, 0, NULL, NULL);
DBG (DBG_proc, "teco_reset_window: leave, status=%d\n", status);
return status;
}
#ifdef sim
unsigned char *image_buf;
int image_buf_begin;
#endif
/* Read the size of the scan. */
static SANE_Status
teco_get_scan_size (Teco_Scanner * dev)
{
size_t size;
CDB cdb;
SANE_Status status;
DBG (DBG_proc, "teco_get_scan_size: enter\n");
size = 0x12;
MKSCSI_GET_DATA_BUFFER_STATUS (cdb, 1, size);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
assert (size == 0x12);
hexdump (DBG_info2, "teco_get_scan_size return", dev->buffer, size);
#ifndef sim
dev->params.lines = B16TOI (&dev->buffer[12]);
dev->bytes_per_raster = B16TOI (&dev->buffer[14]);
switch (dev->scan_mode)
{
case TECO_BW:
dev->params.bytes_per_line = B16TOI (&dev->buffer[14]);
dev->params.pixels_per_line = dev->params.bytes_per_line * 8;
break;
case TECO_GRAYSCALE:
dev->params.pixels_per_line = B16TOI (&dev->buffer[14]);
dev->params.bytes_per_line = dev->params.pixels_per_line;
break;
case TECO_COLOR:
dev->params.pixels_per_line = B16TOI (&dev->buffer[14]);
dev->params.bytes_per_line = dev->params.pixels_per_line * 3;
break;
}
#else
{
size_t s1, s2;
int fd;
char *name;
switch (dev->def->tecoref)
{
case TECO_VM3575:
if (dev->scan_mode == TECO_GRAYSCALE)
{
dev->params.pixels_per_line = 850;
dev->params.bytes_per_line = 850;
dev->params.lines = 1170;
dev->bytes_per_raster = 850;
name = "/home/fzago/sane/teco2/vm3575/gr100d-2.raw";
}
else
{
switch (dev->val[OPT_RESOLUTION].w)
{
case 50:
dev->params.pixels_per_line = 425;
dev->params.lines = 585;
name = "/home/fzago/sane/teco2/vm3575/out12-co50.raw";
break;
case 60:
dev->params.pixels_per_line = 510;
dev->params.lines = 702;
name = "/home/fzago/sane/teco2/vm3575/out12-co60.raw";
break;
case 75:
dev->params.pixels_per_line = 638;
dev->params.lines = 431;
name = "/home/fzago/sane/teco2/vm3575/out12-co75.raw";
break;
case 100:
dev->params.pixels_per_line = 402;
dev->params.lines = 575;
name = "/home/fzago/sane/teco2/vm3575/out12-co100.raw";
break;
}
dev->params.bytes_per_line = dev->params.pixels_per_line * 3;
dev->bytes_per_raster = dev->params.pixels_per_line;
}
break;
case TECO_VM6586:
switch (dev->val[OPT_RESOLUTION].w)
{
case 150:
dev->params.pixels_per_line = 297;
dev->params.lines = 296;
name = "/home/fzago/sane/teco2/vm6586/150dpi.raw";
break;
case 600:
dev->params.pixels_per_line = 1186;
dev->params.lines = 1186;
name = "/home/fzago/sane/teco2/vm6586/600dpi.raw";
break;
}
dev->params.bytes_per_line = dev->params.pixels_per_line * 3;
dev->bytes_per_raster = dev->params.pixels_per_line;
}
s1 = dev->params.bytes_per_line * dev->params.lines;
image_buf = malloc (s1);
assert (image_buf);
image_buf_begin = 0;
fd = open (name, O_RDONLY);
assert (fd >= 0);
s2 = read (fd, image_buf, s1);
assert (s1 == s2);
close (fd);
}
#endif
DBG (DBG_proc, "teco_get_scan_size: exit, status=%d\n", status);
return (status);
}
/* Wait until the scanner is ready to send the data. This is the
almost the same code as teco_get_scan_size(). This function has to
be called once after the scan has started. */
static SANE_Status
teco_wait_for_data (Teco_Scanner * dev)
{
size_t size;
CDB cdb;
SANE_Status status;
int i;
#ifdef sim
return SANE_STATUS_GOOD;
#endif
DBG (DBG_proc, "teco_wait_for_data: enter\n");
for (i = 0; i < 60; i++)
{
size = 0x12;
MKSCSI_GET_DATA_BUFFER_STATUS (cdb, 1, size);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
assert (size == 0x12);
hexdump (DBG_info2, "teco_wait_for_data return", dev->buffer, size);
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
if (dev->buffer[11] > 0x01)
{
return SANE_STATUS_GOOD;
}
sleep (1);
break;
/* For VM3575, VM6575, VM656A, VM6586 until otherwise default value is used */
default:
if (dev->buffer[11] == 0x80)
{
return SANE_STATUS_GOOD;
}
sleep (1);
break;
}
}
DBG (DBG_proc, "teco_wait_for_data: scanner not ready to send data (%d)\n",
status);
return SANE_STATUS_DEVICE_BUSY;
}
/* Do the calibration stuff. Get 12 or 8 lines of data. Each pixel is coded
* in 6 bytes (2 per color) or 3 bytes (3564 and 356A). To do the calibration,
* allocates an array big enough for one line, read the 12 or 8 lines of calibration,
* subtract the highest and lowest value and do a average.
* The input line is 1 raster for each color. However
* the output line is interlaced (ie RBG for the first pixel, then RGB
* for the second, and so on...). The output line are the value to use
* to compensate for the white point.
* There is two algorithms:
*
* The range goes from 0 to 0xfff, and the average is 0x800. So if
* the average input is 0x700, the output value for that dot must be
* 0x1000-0x700=0x900.
*
* and
*
* the calibration needs to be a multiplication factor, to
* compensate for the too strong or too weak pixel in the sensor.
*
* See more info in doc/teco/teco2.txt
*
**/
static SANE_Status
teco_do_calibration (Teco_Scanner * dev)
{
SANE_Status status;
CDB cdb;
size_t size;
int i;
int j;
int colsub0_0, colsub0_1, colsub0_2;
int colsub1_0, colsub1_1, colsub1_2;
int *tmp_buf, *tmp_min_buf, *tmp_max_buf; /* hold the temporary calibration */
size_t tmp_buf_size, tmp_min_buf_size, tmp_max_buf_size;
const char *calibration_algo;
int cal_algo;
colsub0_0 = 0;
colsub0_1 = 0;
colsub0_2 = 0;
colsub1_0 = 0;
colsub1_1 = 0;
colsub1_2 = 0;
DBG (DBG_proc, "teco_do_calibration: enter\n");
/* Get default calibration algorithm. */
cal_algo = dev->def->cal_algo;
if ((calibration_algo = getenv ("SANE_TECO2_CAL_ALGO")) != NULL)
{
cal_algo = atoi (calibration_algo);
}
if (cal_algo != 0 && cal_algo != 1)
{
DBG (DBG_error, "Invalid calibration algorithm (%d)\n", cal_algo);
cal_algo = 0;
}
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
/* white level red, green and blue calibration correction */
/* 0x110 or 272 is middle value */
colsub0_1 = 240 + (dev->val[OPT_WHITE_LEVEL_R].w);
colsub0_2 = 240 + (dev->val[OPT_WHITE_LEVEL_G].w);
colsub0_0 = 240 + (dev->val[OPT_WHITE_LEVEL_B].w);
/* 14000 is middle value */
colsub1_1 = 12720 + (40 * dev->val[OPT_WHITE_LEVEL_R].w);
colsub1_2 = 12720 + (40 * dev->val[OPT_WHITE_LEVEL_G].w);
colsub1_0 = 12720 + (40 * dev->val[OPT_WHITE_LEVEL_B].w);
break;
case TECO_VM3575:
case TECO_VM6575:
/* 0x1100 or 4352 is middle value */
colsub0_1 = 4096 + (8 * dev->val[OPT_WHITE_LEVEL_R].w);
colsub0_2 = 4096 + (8 * dev->val[OPT_WHITE_LEVEL_G].w);
colsub0_0 = 4096 + (8 * dev->val[OPT_WHITE_LEVEL_B].w);
/* 4206639 is middle value */
colsub1_1 = 4078639 + (4000 * dev->val[OPT_WHITE_LEVEL_R].w);
colsub1_2 = 4078639 + (4000 * dev->val[OPT_WHITE_LEVEL_G].w);
colsub1_0 = 4078639 + (4000 * dev->val[OPT_WHITE_LEVEL_B].w);
break;
/* old default value */
case TECO_VM656A:
case TECO_VM6586:
colsub0_1 = 0x1000;
colsub0_2 = 0x1000;
colsub0_0 = 0x1000;
colsub1_1 = 4206639;
colsub1_2 = 4206639;
colsub1_0 = 4206639;
break;
default:
colsub0_1 = 0x1000;
colsub0_2 = 0x1000;
colsub0_0 = 0x1000;
colsub1_1 = 4206639;
colsub1_2 = 4206639;
colsub1_0 = 4206639;
break;
}
tmp_buf_size = dev->def->cal_length * 3 * sizeof (int);
tmp_min_buf_size = dev->def->cal_length * 3 * sizeof (int);
tmp_max_buf_size = dev->def->cal_length * 3 * sizeof (int);
tmp_buf = malloc (tmp_buf_size);
tmp_min_buf = malloc (tmp_min_buf_size);
tmp_max_buf = malloc (tmp_max_buf_size);
memset (tmp_buf, 0, tmp_buf_size);
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
memset (tmp_min_buf, 0xff, tmp_min_buf_size);
memset (tmp_max_buf, 0x00, tmp_max_buf_size);
break;
case TECO_VM3575:
case TECO_VM656A:
case TECO_VM6575:
case TECO_VM6586:
memset (tmp_min_buf, 0xffff, tmp_min_buf_size);
memset (tmp_max_buf, 0x0000, tmp_max_buf_size);
break;
}
if ((tmp_buf == NULL) || (tmp_min_buf == NULL) || (tmp_max_buf == NULL))
{
DBG (DBG_proc, "teco_do_calibration: not enough memory (%ld bytes)\n",
(long) tmp_buf_size);
return (SANE_STATUS_NO_MEM);
}
for (i = 0; i < dev->def->cal_lines; i++)
{
MKSCSI_VENDOR_SPEC (cdb, SCSI_VENDOR_09, 6);
/* No idea what that is. */
switch (dev->scan_mode)
{
case TECO_BW:
cdb.data[2] = 0x02;
break;
case TECO_GRAYSCALE:
cdb.data[2] = 0x01;
break;
case TECO_COLOR:
cdb.data[2] = 0x00;
break;
}
/* Length of the scanner * number of bytes per color */
size = dev->def->cal_length * dev->def->cal_col_len;
cdb.data[3] = (size >> 8) & 0xff;
cdb.data[4] = (size >> 0) & 0xff;
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"teco_do_calibration: cannot read from the scanner\n");
free (tmp_buf);
return status;
}
#ifdef sim
for (j = 0; j < dev->def->cal_length; j++)
{
dev->buffer[6 * j + 0] = 0x10;
dev->buffer[6 * j + 1] = 0x12;
dev->buffer[6 * j + 2] = 0x14;
dev->buffer[6 * j + 3] = 0x16;
dev->buffer[6 * j + 4] = 0x20;
dev->buffer[6 * j + 5] = 0x25;
}
#endif
/*hexdump (DBG_info2, "got calibration line:", dev->buffer, size); */
for (j = 0; j < dev->def->cal_length; j++)
{
switch (dev->def->tecoref)
{
case TECO_VM3575:
case TECO_VM6575:
case TECO_VM656A:
case TECO_VM6586:
tmp_buf[3 * j + 0] +=
(dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0];
/* get lowest value */
if (tmp_min_buf[3 * j + 0] >> ((dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0]))
{
tmp_min_buf[3 * j + 0] = (dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0];
}
/* get highest value */
if (tmp_max_buf[3 * j + 0] < ((dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0]))
{
tmp_max_buf[3 * j + 0] = (dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0];
}
tmp_buf[3 * j + 1] +=
(dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2];
/* get lowest value */
if (tmp_min_buf[3 * j + 1] >> ((dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2]))
{
tmp_min_buf[3 * j + 1] = (dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2];
}
/* get highest value */
if (tmp_max_buf[3 * j + 1] < ((dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2]))
{
tmp_max_buf[3 * j + 1] = (dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2];
}
tmp_buf[3 * j + 2] +=
(dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4];
/* get lowest value */
if (tmp_min_buf[3 * j + 2] >> ((dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4]))
{
tmp_min_buf[3 * j + 2] = (dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4];
}
/* get highest value */
if (tmp_max_buf[3 * j + 2] < ((dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4]))
{
tmp_max_buf[3 * j + 2] = (dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4];
}
break;
case TECO_VM3564:
case TECO_VM356A:
tmp_buf[3 * j + 0] += dev->buffer[3 * j + 0];
/* get lowest value */
if (tmp_min_buf[3 * j + 0] >> dev->buffer[3 * j + 0])
{
tmp_min_buf[3 * j + 0] = dev->buffer[3 * j + 0];
}
/* get highest value */
if (tmp_max_buf[3 * j + 0] < dev->buffer[3 * j + 0])
{
tmp_max_buf[3 * j + 0] = dev->buffer[3 * j + 0];
}
tmp_buf[3 * j + 1] += dev->buffer[3 * j + 1];
/* get lowest value */
if (tmp_min_buf[3 * j + 1] >> dev->buffer[3 * j + 1])
{
tmp_min_buf[3 * j + 1] = dev->buffer[3 * j + 1];
}
/* get highest value */
if (tmp_max_buf[3 * j + 1] < dev->buffer[3 * j + 1])
{
tmp_max_buf[3 * j + 1] = dev->buffer[3 * j + 1];
}
tmp_buf[3 * j + 2] += dev->buffer[3 * j + 2];
/* get lowest value */
if (tmp_min_buf[3 * j + 2] >> dev->buffer[3 * j + 2])
{
tmp_min_buf[3 * j + 2] = dev->buffer[3 * j + 2];
}
/* get highest value */
if (tmp_max_buf[3 * j + 2] < dev->buffer[3 * j + 2])
{
tmp_max_buf[3 * j + 2] = dev->buffer[3 * j + 2];
}
break;
/* default:
tmp_buf[3 * j + 0] +=
(dev->buffer[6 * j + 1] << 8) + dev->buffer[6 * j + 0];
tmp_buf[3 * j + 1] +=
(dev->buffer[6 * j + 3] << 8) + dev->buffer[6 * j + 2];
tmp_buf[3 * j + 2] +=
(dev->buffer[6 * j + 5] << 8) + dev->buffer[6 * j + 4];
break; */
}
}
}
/* hexdump (DBG_info2, "calibration before average:", tmp_buf, tmp_buf_size); */
/* hexdump (DBG_info2, "calibration before average min value:", tmp_min_buf, tmp_min_buf_size); */
/* hexdump (DBG_info2, "calibration before average max value:", tmp_max_buf, tmp_max_buf_size); */
/* Do the average. Since we got 12 or 8 lines, divide all values by 10 or 6
* and create the final calibration value that compensates for the
* white values read. */
switch (dev->def->tecoref)
{
case TECO_VM356A:
case TECO_VM3564:
case TECO_VM3575:
case TECO_VM6575:
case TECO_VM656A:
case TECO_VM6586:
for (j = 0; j < dev->def->cal_length; j++)
{
/* subtract lowest and highest value */
tmp_buf[j] = tmp_buf[j] - (tmp_min_buf[j] + tmp_max_buf[j]);
tmp_buf[j + dev->def->cal_length] = tmp_buf[j + dev->def->cal_length]
- (tmp_min_buf[j + dev->def->cal_length]
+ tmp_max_buf[j + dev->def->cal_length]);
tmp_buf[j + 2 * dev->def->cal_length] = tmp_buf[j + 2 * dev->def->cal_length]
- (tmp_min_buf[j + 2 * dev->def->cal_length]
+ tmp_max_buf[j + 2 *dev->def->cal_length]);
/* sequence colors first color row one then two and last three */
if (cal_algo == 1)
{
tmp_buf[j] = (colsub1_0 * (dev->def->cal_lines - 2)) / tmp_buf[j];
tmp_buf[j + dev->def->cal_length] = (colsub1_1 * (dev->def->cal_lines - 2))
/ tmp_buf[j + dev->def->cal_length];
tmp_buf[j + 2 * dev->def->cal_length] = (colsub1_2 * (dev->def->cal_lines - 2))
/ tmp_buf[j + 2 * dev->def->cal_length];
}
else
{
tmp_buf[j] = colsub0_0 - (tmp_buf[j] / (dev->def->cal_lines - 2));
tmp_buf[j + dev->def->cal_length] = colsub0_1 - (tmp_buf[j + dev->def->cal_length]
/ (dev->def->cal_lines - 2));
tmp_buf[j + 2 * dev->def->cal_length] = colsub0_2
- (tmp_buf[j + 2 * dev->def->cal_length] / (dev->def->cal_lines - 2));
}
}
break;
/* default:
for (j = 0; j < (3 * dev->def->cal_length); j++)
{
if (cal_algo == 1)
tmp_buf[j] = (colsub1_1 * dev->def->cal_lines) / tmp_buf[j];
else
tmp_buf[j] = colsub0_1 - (tmp_buf[j] / dev->def->cal_lines);
}
break; */
}
/*hexdump (DBG_info2, "calibration after average:", tmp_buf, tmp_buf_size); */
/* Build the calibration line to send. */
for (j = 0; j < dev->def->cal_length; j++)
{
switch (dev->def->tecoref)
{
case TECO_VM3575:
case TECO_VM6575:
case TECO_VM656A:
case TECO_VM6586:
dev->buffer[6 * j + 0] =
(tmp_buf[0 * dev->def->cal_length + j] >> 0) & 0xff;
dev->buffer[6 * j + 1] =
(tmp_buf[0 * dev->def->cal_length + j] >> 8) & 0xff;
dev->buffer[6 * j + 2] =
(tmp_buf[1 * dev->def->cal_length + j] >> 0) & 0xff;
dev->buffer[6 * j + 3] =
(tmp_buf[1 * dev->def->cal_length + j] >> 8) & 0xff;
dev->buffer[6 * j + 4] =
(tmp_buf[2 * dev->def->cal_length + j] >> 0) & 0xff;
dev->buffer[6 * j + 5] =
(tmp_buf[2 * dev->def->cal_length + j] >> 8) & 0xff;
break;
case TECO_VM3564:
case TECO_VM356A:
dev->buffer[3 * j + 0] = (tmp_buf[3 * j + 0] >> 0) & 0xff;
dev->buffer[3 * j + 1] = (tmp_buf[3 * j + 1] >> 0) & 0xff;
dev->buffer[3 * j + 2] = (tmp_buf[3 * j + 2] >> 0) & 0xff;
break;
}
}
free (tmp_buf);
tmp_buf = NULL;
/* Send the calibration line. The CDB is the same as the previous
* one, except for the command. */
cdb.data[0] = 0x0E;
size = dev->def->cal_length * dev->def->cal_col_len;
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
/*hexdump (DBG_info2, "calibration line sent:", dev->buffer, size); */
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
dev->buffer, size, NULL, NULL);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
"teco_do_calibration: calibration line was not sent correctly\n");
return status;
}
DBG (DBG_proc, "teco_do_calibration: leave\n");
return SANE_STATUS_GOOD;
}
/*------------request sense command 03----------------*/
static SANE_Status
teco_request_sense (Teco_Scanner * dev)
{
SANE_Status status;
unsigned char buf[255];
CDB cdb;
size_t size;
/* size = 0; */
DBG (DBG_proc, "teco_request_sense: enter\n");
size = sizeof (buf);
MKSCSI_REQUEST_SENSE (cdb, size);
/*size = cdb.data[5];
hexdump (DBG_info2, "teco_request_sense", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size); */
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, buf, &size);
hexdump (DBG_info2, "teco_request_sense:", buf, size);
DBG (DBG_proc, "teco_request_sense: exit, status=%d\n", status);
return (status);
}
/*----------------------------------------------------*/
/* Send the gamma */
static SANE_Status
teco_send_gamma (Teco_Scanner * dev)
{
CDB cdb;
SANE_Status status;
struct
{
unsigned char gamma_R[GAMMA_LENGTH];
unsigned char gamma_G[GAMMA_LENGTH]; /* also gray */
unsigned char gamma_B[GAMMA_LENGTH];
}
param;
size_t i;
size_t size;
DBG (DBG_proc, "teco_send_gamma: enter\n");
size = sizeof (param);
assert (size == 3 * GAMMA_LENGTH);
MKSCSI_SEND_10 (cdb, 0x03, 0x04, size);
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
/* Use the custom gamma. */
if (dev->scan_mode == TECO_GRAYSCALE)
{
/* Gray */
for (i = 0; i < GAMMA_LENGTH; i++)
{
param.gamma_R[i] = dev->gamma_GRAY[i];
param.gamma_G[i] = dev->gamma_GRAY[i];
param.gamma_B[i] = dev->gamma_GRAY[i];
}
}
else
{
/* Color */
for (i = 0; i < GAMMA_LENGTH; i++)
{
param.gamma_R[i] = dev->gamma_R[i];
param.gamma_G[i] = dev->gamma_G[i];
param.gamma_B[i] = dev->gamma_B[i];
}
}
}
else
{
/* Defaults to a linear gamma for now. */
for (i = 0; i < GAMMA_LENGTH; i++)
{
param.gamma_R[i] = i / 4;
param.gamma_G[i] = i / 4;
param.gamma_B[i] = i / 4;
}
}
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
status = 0;
break;
default:
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
¶m, size, NULL, NULL);
}
DBG (DBG_proc, "teco_send_gamma: exit, status=%d\n", status);
return (status);
}
/* Send a vendor specific command. */
static SANE_Status
teco_send_vendor_06 (Teco_Scanner * dev)
{
SANE_Status status;
CDB cdb;
size_t size;
DBG (DBG_proc, "teco_send_vendor_06: enter\n");
MKSCSI_VENDOR_SPEC (cdb, SCSI_VENDOR_06, 6);
size = 4;
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
MKSCSI_VENDOR_SPEC (cdb, SCSI_VENDOR_1C, 6);
size = 4;
memset (dev->buffer, 0, size);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
dev->buffer, size, NULL, NULL);
DBG (DBG_proc, "teco_send_vendor_06: exit, status=%d\n", status);
return (status);
}
/* Start a scan. */
static SANE_Status
teco_scan (Teco_Scanner * dev)
{
CDB cdb;
SANE_Status status;
DBG (DBG_proc, "teco_scan: enter\n");
MKSCSI_SCAN (cdb);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len, NULL, 0, NULL, NULL);
DBG (DBG_proc, "teco_scan: exit, status=%d\n", status);
return status;
}
/* SCSI sense handler. Callback for SANE. */
static SANE_Status
teco_sense_handler (int scsi_fd, unsigned char *result, void __sane_unused__ *arg)
{
int asc, ascq, sensekey;
int len;
DBG (DBG_proc, "teco_sense_handler (scsi_fd = %d)\n", scsi_fd);
sensekey = get_RS_sense_key (result);
len = 7 + get_RS_additional_length (result);
hexdump (DBG_info2, "sense", result, len);
if (get_RS_error_code (result) != 0x70)
{
DBG (DBG_error,
"teco_sense_handler: invalid sense key error code (%d)\n",
get_RS_error_code (result));
return SANE_STATUS_IO_ERROR;
}
if (get_RS_ILI (result) != 0)
{
DBG (DBG_sense, "teco_sense_handler: short read\n");
}
if (len < 14)
{
DBG (DBG_error, "teco_sense_handler: sense too short, no ASC/ASCQ\n");
return SANE_STATUS_IO_ERROR;
}
asc = get_RS_ASC (result);
ascq = get_RS_ASCQ (result);
DBG (DBG_sense, "teco_sense_handler: sense=%d, ASC/ASCQ=%02x%02x\n",
sensekey, asc, ascq);
switch (sensekey)
{
case 0x00: /* no sense */
case 0x02: /* not ready */
case 0x03: /* medium error */
case 0x05:
case 0x06:
break;
}
DBG (DBG_sense,
"teco_sense_handler: unknown error condition. Please report it to the backend maintainer\n");
return SANE_STATUS_IO_ERROR;
}
/* Attach a scanner to this backend. */
static SANE_Status
attach_scanner (const char *devicename, Teco_Scanner ** devp)
{
Teco_Scanner *dev;
int sfd;
DBG (DBG_sane_proc, "attach_scanner: %s\n", devicename);
if (devp)
*devp = NULL;
/* Check if we know this device name. */
for (dev = first_dev; dev; dev = dev->next)
{
if (strcmp (dev->sane.name, devicename) == 0)
{
if (devp)
{
*devp = dev;
}
DBG (DBG_info, "device is already known\n");
return SANE_STATUS_GOOD;
}
}
/* Allocate a new scanner entry. */
dev = teco_init ();
if (dev == NULL)
{
DBG (DBG_error, "ERROR: not enough memory\n");
return SANE_STATUS_NO_MEM;
}
DBG (DBG_info, "attach_scanner: opening %s\n", devicename);
if (sanei_scsi_open (devicename, &sfd, teco_sense_handler, dev) != 0)
{
DBG (DBG_error, "ERROR: attach_scanner: open failed\n");
teco_free (dev);
return SANE_STATUS_INVAL;
}
#ifdef sim
sfd = -1;
#endif
/* Fill some scanner specific values. */
dev->devicename = strdup (devicename);
dev->sfd = sfd;
/* Now, check that it is a scanner we support. */
if (teco_identify_scanner (dev) == SANE_FALSE)
{
DBG (DBG_error,
"ERROR: attach_scanner: scanner-identification failed\n");
teco_free (dev);
return SANE_STATUS_INVAL;
}
teco_close (dev);
/* If this scanner only supports a given number of resolutions,
* build that list now. */
if (dev->def->color_adjust[0].resolution != 0)
{
int num_entries;
int i;
num_entries = 0;
while (dev->def->color_adjust[num_entries].resolution != 0)
num_entries++;
dev->resolutions_list = malloc (sizeof (SANE_Word) * (num_entries + 1));
if (dev->resolutions_list == NULL)
{
DBG (DBG_error,
"ERROR: attach_scanner: scanner-identification failed\n");
teco_free (dev);
return SANE_STATUS_NO_MEM;
}
dev->resolutions_list[0] = num_entries;
for (i = 0; i < num_entries; i++)
{
dev->resolutions_list[i + 1] = dev->def->color_adjust[i].resolution;
}
}
else
{
dev->resolutions_list = NULL;
}
/* Set the default options for that scanner. */
dev->sane.name = dev->devicename;
dev->sane.vendor = dev->def->real_vendor;
dev->sane.model = dev->def->real_product;
dev->sane.type = SANE_I18N ("flatbed scanner");
/* Link the scanner with the others. */
dev->next = first_dev;
first_dev = dev;
if (devp)
{
*devp = dev;
}
num_devices++;
DBG (DBG_proc, "attach_scanner: exit\n");
return SANE_STATUS_GOOD;
}
static SANE_Status
attach_one (const char *dev)
{
attach_scanner (dev, NULL);
return SANE_STATUS_GOOD;
}
/* Reset the options for that scanner. */
static void
teco_init_options (Teco_Scanner * dev)
{
int i;
/* Pre-initialize the options. */
memset (dev->opt, 0, sizeof (dev->opt));
memset (dev->val, 0, sizeof (dev->val));
for (i = 0; i < OPT_NUM_OPTIONS; ++i)
{
dev->opt[i].size = sizeof (SANE_Word);
dev->opt[i].cap = SANE_CAP_SOFT_SELECT | SANE_CAP_SOFT_DETECT;
}
/* Number of options. */
dev->opt[OPT_NUM_OPTS].name = "";
dev->opt[OPT_NUM_OPTS].title = SANE_TITLE_NUM_OPTIONS;
dev->opt[OPT_NUM_OPTS].desc = SANE_DESC_NUM_OPTIONS;
dev->opt[OPT_NUM_OPTS].type = SANE_TYPE_INT;
dev->opt[OPT_NUM_OPTS].cap = SANE_CAP_SOFT_DETECT;
dev->val[OPT_NUM_OPTS].w = OPT_NUM_OPTIONS;
/* Mode group */
dev->opt[OPT_MODE_GROUP].title = SANE_I18N ("Scan Mode");
dev->opt[OPT_MODE_GROUP].desc = ""; /* not valid for a group */
dev->opt[OPT_MODE_GROUP].type = SANE_TYPE_GROUP;
dev->opt[OPT_MODE_GROUP].cap = 0;
dev->opt[OPT_MODE_GROUP].size = 0;
dev->opt[OPT_MODE_GROUP].constraint_type = SANE_CONSTRAINT_NONE;
/* Scanner supported modes */
dev->opt[OPT_MODE].name = SANE_NAME_SCAN_MODE;
dev->opt[OPT_MODE].title = SANE_TITLE_SCAN_MODE;
dev->opt[OPT_MODE].desc = SANE_DESC_SCAN_MODE;
dev->opt[OPT_MODE].type = SANE_TYPE_STRING;
dev->opt[OPT_MODE].size = max_string_size (scan_mode_list);
dev->opt[OPT_MODE].constraint_type = SANE_CONSTRAINT_STRING_LIST;
dev->opt[OPT_MODE].constraint.string_list = scan_mode_list;
dev->val[OPT_MODE].s = (SANE_Char *) strdup (""); /* will be set later */
/* X and Y resolution */
dev->opt[OPT_RESOLUTION].name = SANE_NAME_SCAN_RESOLUTION;
dev->opt[OPT_RESOLUTION].title = SANE_TITLE_SCAN_RESOLUTION;
dev->opt[OPT_RESOLUTION].desc = SANE_DESC_SCAN_RESOLUTION;
dev->opt[OPT_RESOLUTION].type = SANE_TYPE_INT;
dev->opt[OPT_RESOLUTION].unit = SANE_UNIT_DPI;
dev->opt[OPT_RESOLUTION].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_RESOLUTION].constraint.range = &dev->def->res_range;
dev->val[OPT_RESOLUTION].w = DEF_RESOLUTION;
/* Geometry group */
dev->opt[OPT_GEOMETRY_GROUP].title = SANE_I18N ("Geometry");
dev->opt[OPT_GEOMETRY_GROUP].desc = ""; /* not valid for a group */
dev->opt[OPT_GEOMETRY_GROUP].type = SANE_TYPE_GROUP;
dev->opt[OPT_GEOMETRY_GROUP].cap = 0;
dev->opt[OPT_GEOMETRY_GROUP].size = 0;
dev->opt[OPT_GEOMETRY_GROUP].constraint_type = SANE_CONSTRAINT_NONE;
/* Upper left X */
dev->opt[OPT_TL_X].name = SANE_NAME_SCAN_TL_X;
dev->opt[OPT_TL_X].title = SANE_TITLE_SCAN_TL_X;
dev->opt[OPT_TL_X].desc = SANE_DESC_SCAN_TL_X;
dev->opt[OPT_TL_X].type = SANE_TYPE_FIXED;
dev->opt[OPT_TL_X].unit = SANE_UNIT_MM;
dev->opt[OPT_TL_X].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_TL_X].constraint.range = &dev->def->x_range;
dev->val[OPT_TL_X].w = dev->def->x_range.min;
/* Upper left Y */
dev->opt[OPT_TL_Y].name = SANE_NAME_SCAN_TL_Y;
dev->opt[OPT_TL_Y].title = SANE_TITLE_SCAN_TL_Y;
dev->opt[OPT_TL_Y].desc = SANE_DESC_SCAN_TL_Y;
dev->opt[OPT_TL_Y].type = SANE_TYPE_FIXED;
dev->opt[OPT_TL_Y].unit = SANE_UNIT_MM;
dev->opt[OPT_TL_Y].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_TL_Y].constraint.range = &dev->def->y_range;
dev->val[OPT_TL_Y].w = dev->def->y_range.min;
/* Bottom-right x */
dev->opt[OPT_BR_X].name = SANE_NAME_SCAN_BR_X;
dev->opt[OPT_BR_X].title = SANE_TITLE_SCAN_BR_X;
dev->opt[OPT_BR_X].desc = SANE_DESC_SCAN_BR_X;
dev->opt[OPT_BR_X].type = SANE_TYPE_FIXED;
dev->opt[OPT_BR_X].unit = SANE_UNIT_MM;
dev->opt[OPT_BR_X].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_BR_X].constraint.range = &dev->def->x_range;
dev->val[OPT_BR_X].w = dev->def->x_range.max;
/* Bottom-right y */
dev->opt[OPT_BR_Y].name = SANE_NAME_SCAN_BR_Y;
dev->opt[OPT_BR_Y].title = SANE_TITLE_SCAN_BR_Y;
dev->opt[OPT_BR_Y].desc = SANE_DESC_SCAN_BR_Y;
dev->opt[OPT_BR_Y].type = SANE_TYPE_FIXED;
dev->opt[OPT_BR_Y].unit = SANE_UNIT_MM;
dev->opt[OPT_BR_Y].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_BR_Y].constraint.range = &dev->def->y_range;
dev->val[OPT_BR_Y].w = dev->def->y_range.max;
/* Enhancement group */
dev->opt[OPT_ENHANCEMENT_GROUP].title = SANE_I18N ("Enhancement");
dev->opt[OPT_ENHANCEMENT_GROUP].desc = ""; /* not valid for a group */
dev->opt[OPT_ENHANCEMENT_GROUP].type = SANE_TYPE_GROUP;
dev->opt[OPT_ENHANCEMENT_GROUP].cap = SANE_CAP_ADVANCED;
dev->opt[OPT_ENHANCEMENT_GROUP].size = 0;
dev->opt[OPT_ENHANCEMENT_GROUP].constraint_type = SANE_CONSTRAINT_NONE;
/* Halftone pattern */
dev->opt[OPT_DITHER].name = "dither";
dev->opt[OPT_DITHER].title = SANE_I18N ("Dither");
dev->opt[OPT_DITHER].desc = SANE_I18N ("Dither");
dev->opt[OPT_DITHER].type = SANE_TYPE_STRING;
dev->opt[OPT_DITHER].size = max_string_size (dither_list);
dev->opt[OPT_DITHER].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_DITHER].constraint_type = SANE_CONSTRAINT_STRING_LIST;
dev->opt[OPT_DITHER].constraint.string_list = dither_list;
dev->val[OPT_DITHER].s = strdup (dither_list[0]);
/* custom-gamma table */
dev->opt[OPT_CUSTOM_GAMMA].name = SANE_NAME_CUSTOM_GAMMA;
dev->opt[OPT_CUSTOM_GAMMA].title = SANE_TITLE_CUSTOM_GAMMA;
dev->opt[OPT_CUSTOM_GAMMA].desc = SANE_DESC_CUSTOM_GAMMA;
dev->opt[OPT_CUSTOM_GAMMA].type = SANE_TYPE_BOOL;
dev->opt[OPT_CUSTOM_GAMMA].cap |= SANE_CAP_INACTIVE;
dev->val[OPT_CUSTOM_GAMMA].w = SANE_FALSE;
/* red gamma vector */
dev->opt[OPT_GAMMA_VECTOR_R].name = SANE_NAME_GAMMA_VECTOR_R;
dev->opt[OPT_GAMMA_VECTOR_R].title = SANE_TITLE_GAMMA_VECTOR_R;
dev->opt[OPT_GAMMA_VECTOR_R].desc = SANE_DESC_GAMMA_VECTOR_R;
dev->opt[OPT_GAMMA_VECTOR_R].type = SANE_TYPE_INT;
dev->opt[OPT_GAMMA_VECTOR_R].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_R].unit = SANE_UNIT_NONE;
dev->opt[OPT_GAMMA_VECTOR_R].size = GAMMA_LENGTH * sizeof (SANE_Word);
dev->opt[OPT_GAMMA_VECTOR_R].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_GAMMA_VECTOR_R].constraint.range = &gamma_range;
dev->val[OPT_GAMMA_VECTOR_R].wa = dev->gamma_R;
/* green and gamma vector */
dev->opt[OPT_GAMMA_VECTOR_G].name = SANE_NAME_GAMMA_VECTOR_G;
dev->opt[OPT_GAMMA_VECTOR_G].title = SANE_TITLE_GAMMA_VECTOR_G;
dev->opt[OPT_GAMMA_VECTOR_G].desc = SANE_DESC_GAMMA_VECTOR_G;
dev->opt[OPT_GAMMA_VECTOR_G].type = SANE_TYPE_INT;
dev->opt[OPT_GAMMA_VECTOR_G].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].unit = SANE_UNIT_NONE;
dev->opt[OPT_GAMMA_VECTOR_G].size = GAMMA_LENGTH * sizeof (SANE_Word);
dev->opt[OPT_GAMMA_VECTOR_G].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_GAMMA_VECTOR_G].constraint.range = &gamma_range;
dev->val[OPT_GAMMA_VECTOR_G].wa = dev->gamma_G;
/* blue gamma vector */
dev->opt[OPT_GAMMA_VECTOR_B].name = SANE_NAME_GAMMA_VECTOR_B;
dev->opt[OPT_GAMMA_VECTOR_B].title = SANE_TITLE_GAMMA_VECTOR_B;
dev->opt[OPT_GAMMA_VECTOR_B].desc = SANE_DESC_GAMMA_VECTOR_B;
dev->opt[OPT_GAMMA_VECTOR_B].type = SANE_TYPE_INT;
dev->opt[OPT_GAMMA_VECTOR_B].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].unit = SANE_UNIT_NONE;
dev->opt[OPT_GAMMA_VECTOR_B].size = GAMMA_LENGTH * sizeof (SANE_Word);
dev->opt[OPT_GAMMA_VECTOR_B].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_GAMMA_VECTOR_B].constraint.range = &gamma_range;
dev->val[OPT_GAMMA_VECTOR_B].wa = dev->gamma_B;
/* grayscale gamma vector */
dev->opt[OPT_GAMMA_VECTOR_GRAY].name = SANE_NAME_GAMMA_VECTOR;
dev->opt[OPT_GAMMA_VECTOR_GRAY].title = SANE_TITLE_GAMMA_VECTOR;
dev->opt[OPT_GAMMA_VECTOR_GRAY].desc = SANE_DESC_GAMMA_VECTOR;
dev->opt[OPT_GAMMA_VECTOR_GRAY].type = SANE_TYPE_INT;
dev->opt[OPT_GAMMA_VECTOR_GRAY].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_GRAY].unit = SANE_UNIT_NONE;
dev->opt[OPT_GAMMA_VECTOR_GRAY].size = GAMMA_LENGTH * sizeof (SANE_Word);
dev->opt[OPT_GAMMA_VECTOR_GRAY].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_GAMMA_VECTOR_GRAY].constraint.range = &gamma_range;
dev->val[OPT_GAMMA_VECTOR_GRAY].wa = dev->gamma_GRAY;
/* Color filter */
dev->opt[OPT_FILTER_COLOR].name = "color-filter";
dev->opt[OPT_FILTER_COLOR].title = "Color dropout";
dev->opt[OPT_FILTER_COLOR].desc = "Color dropout";
dev->opt[OPT_FILTER_COLOR].type = SANE_TYPE_STRING;
dev->opt[OPT_FILTER_COLOR].size = max_string_size (filter_color_list);
dev->opt[OPT_FILTER_COLOR].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_FILTER_COLOR].constraint_type = SANE_CONSTRAINT_STRING_LIST;
dev->opt[OPT_FILTER_COLOR].constraint.string_list = filter_color_list;
dev->val[OPT_FILTER_COLOR].s = (SANE_Char *) strdup (filter_color_list[0]);
/* Threshold */
dev->opt[OPT_THRESHOLD].name = SANE_NAME_THRESHOLD;
dev->opt[OPT_THRESHOLD].title = SANE_TITLE_THRESHOLD;
dev->opt[OPT_THRESHOLD].desc = SANE_DESC_THRESHOLD;
dev->opt[OPT_THRESHOLD].type = SANE_TYPE_INT;
dev->opt[OPT_THRESHOLD].unit = SANE_UNIT_NONE;
dev->opt[OPT_THRESHOLD].size = sizeof (SANE_Int);
dev->opt[OPT_THRESHOLD].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_THRESHOLD].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_THRESHOLD].constraint.range = &threshold_range;
dev->val[OPT_THRESHOLD].w = 128;
/* preview */
dev->opt[OPT_PREVIEW].name = SANE_NAME_PREVIEW;
dev->opt[OPT_PREVIEW].title = SANE_TITLE_PREVIEW;
dev->opt[OPT_PREVIEW].desc = SANE_DESC_PREVIEW;
dev->opt[OPT_PREVIEW].type = SANE_TYPE_BOOL;
dev->opt[OPT_PREVIEW].cap = SANE_CAP_SOFT_DETECT | SANE_CAP_SOFT_SELECT;
dev->val[OPT_PREVIEW].w = SANE_FALSE;
/* red level calibration manual correction */
dev->opt[OPT_WHITE_LEVEL_R].name = SANE_NAME_WHITE_LEVEL_R;
dev->opt[OPT_WHITE_LEVEL_R].title = SANE_TITLE_WHITE_LEVEL_R;
dev->opt[OPT_WHITE_LEVEL_R].desc = SANE_DESC_WHITE_LEVEL_R;
dev->opt[OPT_WHITE_LEVEL_R].type = SANE_TYPE_INT;
dev->opt[OPT_WHITE_LEVEL_R].unit = SANE_UNIT_NONE;
dev->opt[OPT_WHITE_LEVEL_R].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_WHITE_LEVEL_R].constraint.range = &red_level_range;
dev->val[OPT_WHITE_LEVEL_R].w = 32; /* to get middle value */
/* green level calibration manual correction */
dev->opt[OPT_WHITE_LEVEL_G].name = SANE_NAME_WHITE_LEVEL_G;
dev->opt[OPT_WHITE_LEVEL_G].title = SANE_TITLE_WHITE_LEVEL_G;
dev->opt[OPT_WHITE_LEVEL_G].desc = SANE_DESC_WHITE_LEVEL_G;
dev->opt[OPT_WHITE_LEVEL_G].type = SANE_TYPE_INT;
dev->opt[OPT_WHITE_LEVEL_G].unit = SANE_UNIT_NONE;
dev->opt[OPT_WHITE_LEVEL_G].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_WHITE_LEVEL_G].constraint.range = &green_level_range;
dev->val[OPT_WHITE_LEVEL_G].w = 32; /* to get middle value */
/* blue level calibration manual correction */
dev->opt[OPT_WHITE_LEVEL_B].name = SANE_NAME_WHITE_LEVEL_B;
dev->opt[OPT_WHITE_LEVEL_B].title = SANE_TITLE_WHITE_LEVEL_B;
dev->opt[OPT_WHITE_LEVEL_B].desc = SANE_DESC_WHITE_LEVEL_B;
dev->opt[OPT_WHITE_LEVEL_B].type = SANE_TYPE_INT;
dev->opt[OPT_WHITE_LEVEL_B].unit = SANE_UNIT_NONE;
dev->opt[OPT_WHITE_LEVEL_B].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_WHITE_LEVEL_B].constraint.range = &blue_level_range;
dev->val[OPT_WHITE_LEVEL_B].w = 32; /* to get middle value */
/* Lastly, set the default scan mode. This might change some
* values previously set here. */
sane_control_option (dev, OPT_MODE, SANE_ACTION_SET_VALUE,
(SANE_String_Const *) scan_mode_list[0], NULL);
}
/*
* Wait until the scanner is ready.
*/
static SANE_Status
teco_wait_scanner (Teco_Scanner * dev)
{
SANE_Status status;
int timeout;
CDB cdb;
DBG (DBG_proc, "teco_wait_scanner: enter\n");
MKSCSI_TEST_UNIT_READY (cdb);
/* Set the timeout to 60 seconds. */
timeout = 60;
while (timeout > 0)
{
/* test unit ready */
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd (dev->sfd, cdb.data, cdb.len, NULL, NULL);
if (status == SANE_STATUS_GOOD)
{
return SANE_STATUS_GOOD;
}
sleep (1);
};
DBG (DBG_proc, "teco_wait_scanner: scanner not ready\n");
return (SANE_STATUS_IO_ERROR);
}
/*
* Adjust the rasters. This function is used during a color scan,
* because the scanner does not present a format sane can interpret
* directly.
*
* The scanner sends the colors by rasters (B then G then R), whereas
* sane is waiting for a group of 3 bytes per color. To make things
* funnier, the rasters are shifted. As a result, color planes appear to be shifted be a few pixels.
*
* The order of the color is dependent on each scanners. Also the same
* scanner can change the order depending on the resolution.
*
* For instance, the VM6586 at 300dpi has a color shift of 2 lines. The rasters sent are:
* starts with two blue rasters - BB,
* then red in added - BRBR
* then green - BRG ... (most of the picture)
* then blue is removed - RGRG
* and finally only green stays - GG
*
* Overall there is the same number of RGB rasters.
* The VM3575 is a variant (when factor_x is 0). It does not keep the same order,
* but reverses it, eg:
* BB RBRB GRB... GRGR GG
* (ie it adds the new color in front of the previous one, instead of after).
*
* So this function reorders all that mess. It gets the input from
* dev->buffer and write the output in dev->image. size_in the the
* length of the valid data in dev->buffer. */
#define COLOR_0 (color_adjust->z3_color_0)
#define COLOR_1 (color_adjust->z3_color_1)
#define COLOR_2 (color_adjust->z3_color_2)
static void
teco_adjust_raster (Teco_Scanner * dev, size_t size_in)
{
int nb_rasters; /* number of rasters in dev->buffer */
int raster; /* current raster number in buffer */
int line; /* line number for that raster */
int color; /* color for that raster */
size_t offset;
const struct dpi_color_adjust *color_adjust = dev->color_adjust;
DBG (DBG_proc, "teco_adjust_raster: enter\n");
color = 0; /* keep gcc quiet */
assert (dev->scan_mode == TECO_COLOR);
assert ((size_in % dev->params.bytes_per_line) == 0);
if (size_in == 0)
{
return;
}
/*
* The color coding is one line for each color (in the RGB order).
* Recombine that stuff to create a RGB value for each pixel.
*/
nb_rasters = size_in / dev->raster_size;
for (raster = 0; raster < nb_rasters; raster++)
{
/*
* Find the color and the line which this raster belongs to.
*/
line = 0;
if (dev->raster_num < color_adjust->color_shift)
{
/* Top of the picture. */
if (color_adjust->factor_x)
{
color = COLOR_2;
}
else
{
color = COLOR_1;
}
line = dev->raster_num;
}
else if (dev->raster_num < (3 * color_adjust->color_shift))
{
/* Top of the picture. */
if ((dev->raster_num - color_adjust->color_shift) % 2)
{
color = COLOR_0;
line = (dev->raster_num - color_adjust->color_shift) / 2;
}
else
{
if (color_adjust->factor_x)
{
color = COLOR_2;
}
else
{
color = COLOR_1;
}
line = (dev->raster_num + color_adjust->color_shift) / 2;
}
}
else if (dev->raster_num >=
dev->raster_real - color_adjust->color_shift)
{
/* Bottom of the picture. */
if (color_adjust->factor_x)
{
color = COLOR_1;
}
else
{
color = COLOR_2;
}
line = dev->line;
}
else if (dev->raster_num >=
dev->raster_real - 3 * color_adjust->color_shift)
{
/* Bottom of the picture. */
if ((dev->raster_real - dev->raster_num -
color_adjust->color_shift) % 2)
{
if (color_adjust->factor_x)
{
color = COLOR_1;
line = dev->line;
}
else
{
color = COLOR_0;
line = dev->line + color_adjust->color_shift - 1;
}
}
else
{
if (color_adjust->factor_x)
{
color = COLOR_0;
line = dev->line + color_adjust->color_shift;
}
else
{
color = COLOR_2;
line = dev->line;
}
}
}
else
{
/* Middle of the picture. */
switch ((dev->raster_num) % 3)
{
case 0:
color = COLOR_2;
if (color_adjust->factor_x)
line = dev->raster_num / 3 + color_adjust->color_shift;
else
line = dev->raster_num / 3 - color_adjust->color_shift;
break;
case 1:
color = COLOR_0;
line = dev->raster_num / 3;
break;
case 2:
color = COLOR_1;
if (color_adjust->factor_x)
line = dev->raster_num / 3 - color_adjust->color_shift;
else
line = dev->raster_num / 3 + color_adjust->color_shift;
break;
}
}
/* Adjust the line number relative to the image. */
line -= dev->line;
offset = dev->image_end + line * dev->params.bytes_per_line;
assert (offset <= (dev->image_size - dev->params.bytes_per_line));
/* Copy the raster to the temporary image. */
{
int i;
unsigned char *src = dev->buffer + raster * dev->raster_size;
unsigned char *dest = dev->image + offset + color;
for (i = 0; i < dev->raster_size; i++)
{
*dest = *src;
src++;
dest += 3;
}
}
DBG (DBG_info, "raster=%d, line=%d, color=%d\n", dev->raster_num,
dev->line + line, color);
if ((color_adjust->factor_x == 0 && color == COLOR_2) ||
(color_adjust->factor_x == 1 && color == COLOR_1))
{
/* This blue raster completes a new line */
dev->line++;
dev->image_end += dev->params.bytes_per_line;
}
dev->raster_num++;
}
DBG (DBG_proc, "teco_adjust_raster: exit\n");
}
/* Read the image from the scanner and fill the temporary buffer with it. */
static SANE_Status
teco_fill_image (Teco_Scanner * dev)
{
SANE_Status status;
size_t size;
CDB cdb;
DBG (DBG_proc, "teco_fill_image: enter\n");
assert (dev->image_begin == dev->image_end);
assert (dev->real_bytes_left > 0);
/* Copy the complete lines, plus the incompletes
* ones. We don't keep the real end of data used
* in image, so we copy the biggest possible.
*
* This is a no-op for non color images.
*/
memmove (dev->image, dev->image + dev->image_begin, dev->raster_ahead);
dev->image_begin = 0;
dev->image_end = 0;
while (dev->real_bytes_left)
{
/*
* Try to read the maximum number of bytes.
*/
size = dev->real_bytes_left;
if (size > dev->image_size - dev->raster_ahead - dev->image_end)
{
size = dev->image_size - dev->raster_ahead - dev->image_end;
}
if (size > dev->buffer_size)
{
size = dev->buffer_size;
}
/* Limit to 0x2000 bytes as does the TWAIN driver. */
if (size > 0x2000)
size = 0x2000;
/* Round down to a multiple of line size. */
size = size - (size % dev->params.bytes_per_line);
if (size == 0)
{
/* Probably reached the end of the buffer.
* Check, just in case. */
assert (dev->image_end != 0);
return (SANE_STATUS_GOOD);
}
DBG (DBG_info, "teco_fill_image: to read = %ld bytes (bpl=%d)\n",
(long) size, dev->params.bytes_per_line);
MKSCSI_READ_10 (cdb, 0, 0, size);
cdb.data[5] = size / dev->params.bytes_per_line;
hexdump (DBG_info2, "teco_fill_image: READ_10 CDB", cdb.data, cdb.len);
hexdump (DBG_info2, "CDB:", cdb.data, cdb.len);
status = sanei_scsi_cmd2 (dev->sfd, cdb.data, cdb.len,
NULL, 0, dev->buffer, &size);
#ifdef sim
memcpy (dev->buffer, image_buf + image_buf_begin, size);
image_buf_begin += size;
#endif
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "teco_fill_image: cannot read from the scanner\n");
return status;
}
DBG (DBG_info, "teco_fill_image: real bytes left = %ld\n",
(long) dev->real_bytes_left);
if (dev->scan_mode == TECO_COLOR &&
dev->def->tecoref != TECO_VM656A && raw_output == 0)
{
teco_adjust_raster (dev, size);
}
else
{
memcpy (dev->image + dev->image_end, dev->buffer, size);
dev->image_end += size;
}
dev->real_bytes_left -= size;
}
return (SANE_STATUS_GOOD); /* unreachable */
}
/* Copy from the raw buffer to the buffer given by the backend.
*
* len in input is the maximum length available in buf, and, in
* output, is the length written into buf.
*/
static void
teco_copy_raw_to_frontend (Teco_Scanner * dev, SANE_Byte * buf, size_t * len)
{
size_t size;
size = dev->image_end - dev->image_begin;
if (size > *len)
{
size = *len;
}
*len = size;
switch (dev->scan_mode)
{
case TECO_BW:
{
/* Invert black and white. */
unsigned char *src = dev->image + dev->image_begin;
size_t i;
for (i = 0; i < size; i++)
{
*buf = *src ^ 0xff;
src++;
buf++;
}
}
break;
case TECO_GRAYSCALE:
case TECO_COLOR:
memcpy (buf, dev->image + dev->image_begin, size);
break;
}
dev->image_begin += size;
}
/* Stop a scan. */
static SANE_Status
do_cancel (Teco_Scanner * dev)
{
DBG (DBG_sane_proc, "do_cancel enter\n");
if (dev->scanning == SANE_TRUE)
{
/* Reset the scanner */
teco_reset_window (dev);
teco_close (dev);
}
dev->scanning = SANE_FALSE;
DBG (DBG_sane_proc, "do_cancel exit\n");
return SANE_STATUS_CANCELLED;
}
/*--------------------------------------------------------------------------*/
/* Sane entry points */
SANE_Status
sane_init (SANE_Int * version_code, SANE_Auth_Callback __sane_unused__ authorize)
{
FILE *fp;
char dev_name[PATH_MAX];
size_t len;
DBG_INIT ();
DBG (DBG_sane_init, "sane_init\n");
DBG (DBG_error, "This is sane-teco2 version %d.%d-%d\n", SANE_CURRENT_MAJOR,
V_MINOR, BUILD);
DBG (DBG_error, "(C) 2002 - 2003 by Frank Zago, update 2003 - 2008 by Gerard Klaver\n");
if (version_code)
{
*version_code = SANE_VERSION_CODE (SANE_CURRENT_MAJOR, V_MINOR, BUILD);
}
fp = sanei_config_open (TECO2_CONFIG_FILE);
if (!fp)
{
/* default to /dev/scanner instead of insisting on config file */
attach_scanner ("/dev/scanner", 0);
return SANE_STATUS_GOOD;
}
while (sanei_config_read (dev_name, sizeof (dev_name), fp))
{
if (dev_name[0] == '#') /* ignore line comments */
continue;
len = strlen (dev_name);
if (!len)
continue; /* ignore empty lines */
sanei_config_attach_matching_devices (dev_name, attach_one);
}
fclose (fp);
DBG (DBG_proc, "sane_init: leave\n");
return SANE_STATUS_GOOD;
}
SANE_Status
sane_get_devices (const SANE_Device *** device_list, SANE_Bool __sane_unused__ local_only)
{
Teco_Scanner *dev;
int i;
DBG (DBG_proc, "sane_get_devices: enter\n");
if (devlist)
free (devlist);
devlist = malloc ((num_devices + 1) * sizeof (devlist[0]));
if (!devlist)
return SANE_STATUS_NO_MEM;
i = 0;
for (dev = first_dev; i < num_devices; dev = dev->next)
devlist[i++] = &dev->sane;
devlist[i++] = 0;
*device_list = devlist;
DBG (DBG_proc, "sane_get_devices: exit\n");
return SANE_STATUS_GOOD;
}
SANE_Status
sane_open (SANE_String_Const devicename, SANE_Handle * handle)
{
Teco_Scanner *dev;
SANE_Status status;
int i;
DBG (DBG_proc, "sane_open: enter\n");
/* search for devicename */
if (devicename[0])
{
DBG (DBG_info, "sane_open: devicename=%s\n", devicename);
for (dev = first_dev; dev; dev = dev->next)
{
if (strcmp (dev->sane.name, devicename) == 0)
{
break;
}
}
if (!dev)
{
status = attach_scanner (devicename, &dev);
if (status != SANE_STATUS_GOOD)
{
return status;
}
}
}
else
{
DBG (DBG_sane_info, "sane_open: no devicename, opening first device\n");
dev = first_dev; /* empty devicename -> use first device */
}
if (!dev)
{
DBG (DBG_error, "No scanner found\n");
return SANE_STATUS_INVAL;
}
teco_init_options (dev);
/* Initialize the gamma table. */
for (i = 0; i < GAMMA_LENGTH; i++)
{
dev->gamma_R[i] = i / 4;
dev->gamma_G[i] = i / 4;
dev->gamma_B[i] = i / 4;
dev->gamma_GRAY[i] = i / 4;
}
*handle = dev;
DBG (DBG_proc, "sane_open: exit\n");
return SANE_STATUS_GOOD;
}
const SANE_Option_Descriptor *
sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
{
Teco_Scanner *dev = handle;
DBG (DBG_proc, "sane_get_option_descriptor: enter, option %d\n", option);
if ((unsigned) option >= OPT_NUM_OPTIONS)
{
return NULL;
}
DBG (DBG_proc, "sane_get_option_descriptor: exit\n");
return dev->opt + option;
}
SANE_Status
sane_control_option (SANE_Handle handle, SANE_Int option,
SANE_Action action, void *val, SANE_Int * info)
{
Teco_Scanner *dev = handle;
SANE_Status status;
SANE_Word cap;
DBG (DBG_proc, "sane_control_option: enter, option %d, action %d\n",
option, action);
if (info)
{
*info = 0;
}
if (dev->scanning)
{
return SANE_STATUS_DEVICE_BUSY;
}
if (option < 0 || option >= OPT_NUM_OPTIONS)
{
return SANE_STATUS_INVAL;
}
cap = dev->opt[option].cap;
if (!SANE_OPTION_IS_ACTIVE (cap))
{
return SANE_STATUS_INVAL;
}
if (action == SANE_ACTION_GET_VALUE)
{
switch (option)
{
/* word options */
case OPT_NUM_OPTS:
case OPT_RESOLUTION:
case OPT_TL_Y:
case OPT_BR_Y:
case OPT_TL_X:
case OPT_BR_X:
case OPT_CUSTOM_GAMMA:
case OPT_PREVIEW:
case OPT_THRESHOLD:
case OPT_WHITE_LEVEL_R:
case OPT_WHITE_LEVEL_G:
case OPT_WHITE_LEVEL_B:
*(SANE_Word *) val = dev->val[option].w;
return SANE_STATUS_GOOD;
/* string options */
case OPT_MODE:
case OPT_DITHER:
case OPT_FILTER_COLOR:
strcpy (val, dev->val[option].s);
return SANE_STATUS_GOOD;
/* Gamma */
case OPT_GAMMA_VECTOR_R:
case OPT_GAMMA_VECTOR_G:
case OPT_GAMMA_VECTOR_B:
case OPT_GAMMA_VECTOR_GRAY:
memcpy (val, dev->val[option].wa, dev->opt[option].size);
return SANE_STATUS_GOOD;
default:
return SANE_STATUS_INVAL;
}
}
else if (action == SANE_ACTION_SET_VALUE)
{
if (!SANE_OPTION_IS_SETTABLE (cap))
{
DBG (DBG_error, "could not set option, not settable\n");
return SANE_STATUS_INVAL;
}
status = sanei_constrain_value (dev->opt + option, val, info);
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error, "could not set option, invalid value\n");
return status;
}
switch (option)
{
/* Numeric side-effect options */
case OPT_TL_Y:
case OPT_BR_Y:
case OPT_TL_X:
case OPT_BR_X:
case OPT_THRESHOLD:
case OPT_RESOLUTION:
case OPT_WHITE_LEVEL_R:
case OPT_WHITE_LEVEL_G:
case OPT_WHITE_LEVEL_B:
if (info)
{
*info |= SANE_INFO_RELOAD_PARAMS;
}
dev->val[option].w = *(SANE_Word *) val;
return SANE_STATUS_GOOD;
/* Numeric side-effect free options */
case OPT_PREVIEW:
dev->val[option].w = *(SANE_Word *) val;
return SANE_STATUS_GOOD;
/* String side-effect free options */
case OPT_DITHER:
free (dev->val[option].s);
dev->val[option].s = (SANE_String) strdup (val);
return SANE_STATUS_GOOD;
case OPT_FILTER_COLOR:
free (dev->val[option].s);
dev->val[option].s = (SANE_String) strdup (val);
return SANE_STATUS_GOOD;
/* String side-effect options */
case OPT_MODE:
if (strcmp (dev->val[option].s, val) == 0)
return SANE_STATUS_GOOD;
free (dev->val[OPT_MODE].s);
dev->val[OPT_MODE].s = (SANE_Char *) strdup (val);
dev->opt[OPT_CUSTOM_GAMMA].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_R].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_GRAY].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_DITHER].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_FILTER_COLOR].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_THRESHOLD].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_R].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_G].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_B].cap |= SANE_CAP_INACTIVE;
/* This the default resolution range, except for the
* VM3575, VM3564, VM356A and VM6586 in color mode. */
dev->opt[OPT_RESOLUTION].constraint_type = SANE_CONSTRAINT_RANGE;
dev->opt[OPT_RESOLUTION].constraint.range = &dev->def->res_range;
if (strcmp (dev->val[OPT_MODE].s, SANE_VALUE_SCAN_MODE_LINEART) == 0)
{
dev->scan_mode = TECO_BW;
dev->depth = 8;
dev->opt[OPT_DITHER].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_FILTER_COLOR].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_THRESHOLD].cap &= ~SANE_CAP_INACTIVE;
}
else if (strcmp (dev->val[OPT_MODE].s, SANE_VALUE_SCAN_MODE_GRAY) == 0)
{
dev->scan_mode = TECO_GRAYSCALE;
dev->depth = 8;
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
dev->opt[OPT_WHITE_LEVEL_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_B].cap &= ~SANE_CAP_INACTIVE;
break;
case TECO_VM3575:
case TECO_VM6575:
dev->opt[OPT_WHITE_LEVEL_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_B].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_CUSTOM_GAMMA].cap &= ~SANE_CAP_INACTIVE;
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
dev->opt[OPT_GAMMA_VECTOR_GRAY].cap &=
~SANE_CAP_INACTIVE;
}
break;
case TECO_VM656A:
case TECO_VM6586:
dev->opt[OPT_CUSTOM_GAMMA].cap &= ~SANE_CAP_INACTIVE;
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
dev->opt[OPT_GAMMA_VECTOR_GRAY].cap &=
~SANE_CAP_INACTIVE;
}
break;
}
dev->opt[OPT_FILTER_COLOR].cap &= ~SANE_CAP_INACTIVE;
}
else if (strcmp (dev->val[OPT_MODE].s, SANE_VALUE_SCAN_MODE_COLOR) == 0)
{
dev->scan_mode = TECO_COLOR;
dev->depth = 8;
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
dev->opt[OPT_WHITE_LEVEL_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_B].cap &= ~SANE_CAP_INACTIVE;
break;
case TECO_VM3575:
case TECO_VM6575:
dev->opt[OPT_WHITE_LEVEL_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_WHITE_LEVEL_B].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_CUSTOM_GAMMA].cap &= ~SANE_CAP_INACTIVE;
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
dev->opt[OPT_GAMMA_VECTOR_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].cap &= ~SANE_CAP_INACTIVE;
}
break;
case TECO_VM656A:
case TECO_VM6586:
dev->opt[OPT_CUSTOM_GAMMA].cap &= ~SANE_CAP_INACTIVE;
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
dev->opt[OPT_GAMMA_VECTOR_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].cap &= ~SANE_CAP_INACTIVE;
}
break;
}
/* The VM3575, VM3564, VM356A and VM6586 supports only a handful of resolution. Do that here.
* Ugly! */
if (dev->resolutions_list != NULL)
{
int i;
dev->opt[OPT_RESOLUTION].constraint_type =
SANE_CONSTRAINT_WORD_LIST;
dev->opt[OPT_RESOLUTION].constraint.word_list =
dev->resolutions_list;
/* If the resolution isn't in the list, set a default. */
for (i = 1; i <= dev->resolutions_list[0]; i++)
{
if (dev->resolutions_list[i] >=
dev->val[OPT_RESOLUTION].w)
break;
}
if (i > dev->resolutions_list[0])
{
/* Too big. Take default. */
dev->val[OPT_RESOLUTION].w = DEF_RESOLUTION;
}
else
{
/* Take immediate superioir value. */
dev->val[OPT_RESOLUTION].w = dev->resolutions_list[i];
}
}
}
if (info)
{
*info |= SANE_INFO_RELOAD_OPTIONS | SANE_INFO_RELOAD_PARAMS;
}
return SANE_STATUS_GOOD;
case OPT_GAMMA_VECTOR_R:
case OPT_GAMMA_VECTOR_G:
case OPT_GAMMA_VECTOR_B:
case OPT_GAMMA_VECTOR_GRAY:
memcpy (dev->val[option].wa, val, dev->opt[option].size);
return SANE_STATUS_GOOD;
case OPT_CUSTOM_GAMMA:
dev->val[OPT_CUSTOM_GAMMA].w = *(SANE_Word *) val;
if (dev->val[OPT_CUSTOM_GAMMA].w)
{
/* use custom_gamma_table */
if (dev->scan_mode == TECO_GRAYSCALE)
{
dev->opt[OPT_GAMMA_VECTOR_GRAY].cap &= ~SANE_CAP_INACTIVE;
}
else
{
/* color mode */
dev->opt[OPT_GAMMA_VECTOR_R].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].cap &= ~SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].cap &= ~SANE_CAP_INACTIVE;
}
}
else
{
dev->opt[OPT_GAMMA_VECTOR_R].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_G].cap |= SANE_CAP_INACTIVE;
dev->opt[OPT_GAMMA_VECTOR_B].cap |= SANE_CAP_INACTIVE;
}
if (info)
{
*info |= SANE_INFO_RELOAD_OPTIONS;
}
return SANE_STATUS_GOOD;
default:
return SANE_STATUS_INVAL;
}
}
DBG (DBG_proc, "sane_control_option: exit, bad\n");
return SANE_STATUS_UNSUPPORTED;
}
SANE_Status
sane_get_parameters (SANE_Handle handle, SANE_Parameters * params)
{
Teco_Scanner *dev = handle;
DBG (DBG_proc, "sane_get_parameters: enter\n");
if (!(dev->scanning))
{
/* Setup the parameters for the scan. These values will be re-used
* in the SET WINDOWS command. */
if (dev->val[OPT_PREVIEW].w == SANE_TRUE)
{
/* for VM356A, no good 50 dpi scan possible, now leave as */
switch (dev->def->tecoref)
{
case TECO_VM356A:
case TECO_VM6575:
dev->x_resolution = 75;
dev->y_resolution = 75;
break;
/* For VM3575, VM656A, VM6586 etc until otherwise default value is used */
default:
dev->x_resolution = 50;
dev->y_resolution = 50;
break;
}
dev->x_tl = 0;
dev->y_tl = 0;
dev->x_br = mmToIlu (SANE_UNFIX (dev->def->x_range.max));
dev->y_br = mmToIlu (SANE_UNFIX (dev->def->y_range.max));
}
else
{
dev->x_resolution = dev->val[OPT_RESOLUTION].w;
dev->y_resolution = dev->val[OPT_RESOLUTION].w;
dev->x_tl = mmToIlu (SANE_UNFIX (dev->val[OPT_TL_X].w));
dev->y_tl = mmToIlu (SANE_UNFIX (dev->val[OPT_TL_Y].w));
dev->x_br = mmToIlu (SANE_UNFIX (dev->val[OPT_BR_X].w));
dev->y_br = mmToIlu (SANE_UNFIX (dev->val[OPT_BR_Y].w));
}
if (dev->x_resolution > dev->def->x_resolution_max)
{
dev->x_resolution = dev->def->x_resolution_max;
}
/* Check the corners are OK. */
if (dev->x_tl > dev->x_br)
{
int s;
s = dev->x_tl;
dev->x_tl = dev->x_br;
dev->x_br = s;
}
if (dev->y_tl > dev->y_br)
{
int s;
s = dev->y_tl;
dev->y_tl = dev->y_br;
dev->y_br = s;
}
dev->width = dev->x_br - dev->x_tl;
dev->length = dev->y_br - dev->y_tl;
/* Prepare the parameters for the caller. */
memset (&dev->params, 0, sizeof (SANE_Parameters));
dev->params.last_frame = SANE_TRUE;
switch (dev->scan_mode)
{
case TECO_BW:
dev->params.format = SANE_FRAME_GRAY;
dev->params.pixels_per_line =
((dev->width * dev->x_resolution) /
dev->def->x_resolution_max) & ~0x7;
dev->params.bytes_per_line = dev->params.pixels_per_line / 8;
dev->params.depth = 1;
dev->color_adjust = NULL;
break;
case TECO_GRAYSCALE:
dev->params.format = SANE_FRAME_GRAY;
dev->params.pixels_per_line =
((dev->width * dev->x_resolution) / dev->def->x_resolution_max);
if ((dev->def->tecoref == TECO_VM656A
|| dev->def->tecoref == TECO_VM6586)
&& ((dev->width * dev->x_resolution) %
dev->def->x_resolution_max != 0))
{
/* Round up */
dev->params.pixels_per_line += 1;
}
dev->params.bytes_per_line = dev->params.pixels_per_line;
dev->params.depth = 8;
dev->color_adjust = NULL;
break;
case TECO_COLOR:
dev->params.format = SANE_FRAME_RGB;
dev->params.pixels_per_line =
((dev->width * dev->x_resolution) / dev->def->x_resolution_max);
if ((dev->def->tecoref == TECO_VM656A
|| dev->def->tecoref == TECO_VM6586)
&& ((dev->width * dev->x_resolution) %
dev->def->x_resolution_max != 0))
{
/* Round up */
dev->params.pixels_per_line += 1;
}
dev->params.bytes_per_line = dev->params.pixels_per_line * 3;
dev->params.depth = 8;
if (dev->resolutions_list != NULL)
{
/* This scanner has a fixed number of supported
* resolutions. Find the color shift for that
* resolution. */
int i;
for (i = 0;
dev->def->color_adjust[i].resolution != dev->y_resolution;
i++);
dev->color_adjust = &dev->def->color_adjust[i];
}
else
{
dev->color_adjust = &dev->def->color_adjust[0];
}
break;
}
dev->params.lines =
(dev->length * dev->y_resolution) / dev->def->x_resolution_max;
}
/* Return the current values. */
if (params)
{
*params = (dev->params);
}
DBG (DBG_proc, "sane_get_parameters: exit\n");
return SANE_STATUS_GOOD;
}
SANE_Status
sane_start (SANE_Handle handle)
{
Teco_Scanner *dev = handle;
SANE_Status status;
DBG (DBG_proc, "sane_start: enter\n");
if (!(dev->scanning))
{
sane_get_parameters (dev, NULL);
/* Open again the scanner. */
if (sanei_scsi_open
(dev->devicename, &(dev->sfd), teco_sense_handler, dev) != 0)
{
DBG (DBG_error, "ERROR: sane_start: open failed\n");
return SANE_STATUS_INVAL;
}
/* The scanner must be ready. */
status = teco_wait_scanner (dev);
if (status)
{
teco_close (dev);
return status;
}
status = teco_set_window (dev);
if (status)
{
teco_close (dev);
return status;
}
status = teco_get_scan_size (dev);
if (status)
{
teco_close (dev);
return status;
}
/* Compute the length necessary in image. The first part will store
* the complete lines, and the rest is used to stored ahead
* rasters.
*/
if (dev->color_adjust)
{
dev->raster_ahead =
(2 * dev->color_adjust->color_shift) * dev->params.bytes_per_line;
}
else
{
dev->raster_ahead = 0;
}
dev->image_size = dev->buffer_size + dev->raster_ahead;
dev->image = malloc (dev->image_size);
if (dev->image == NULL)
{
return SANE_STATUS_NO_MEM;
}
/* Rasters are meaningful only in color mode. */
dev->raster_size = dev->params.pixels_per_line;
dev->raster_real = dev->params.lines * 3;
dev->raster_num = 0;
dev->line = 0;
#if 1
status = teco_do_calibration (dev);
if (status)
{
teco_close (dev);
return status;
}
#endif
switch (dev->def->tecoref)
{
/* case TECO_VM3564: not for VM3564 */
case TECO_VM356A:
/*--------------request sense for first time loop---*/
status = teco_request_sense (dev);
if (status)
{
teco_close (dev);
return status;
}
break;
default:
break;
}
status = teco_send_gamma (dev);
if (status)
{
teco_close (dev);
return status;
}
status = teco_set_window (dev);
if (status)
{
teco_close (dev);
return status;
}
switch (dev->def->tecoref)
{
case TECO_VM3564:
case TECO_VM356A:
break;
default:
status = teco_send_vendor_06 (dev);
if (status)
{
teco_close (dev);
return status;
}
}
status = teco_scan (dev);
if (status)
{
teco_close (dev);
return status;
}
status = teco_wait_for_data (dev);
if (status)
{
teco_close (dev);
return status;
}
}
dev->image_end = 0;
dev->image_begin = 0;
dev->bytes_left = dev->params.bytes_per_line * dev->params.lines;
dev->real_bytes_left = dev->params.bytes_per_line * dev->params.lines;
dev->scanning = SANE_TRUE;
DBG (DBG_proc, "sane_start: exit\n");
return SANE_STATUS_GOOD;
}
SANE_Status
sane_read (SANE_Handle handle, SANE_Byte * buf, SANE_Int max_len,
SANE_Int * len)
{
SANE_Status status;
Teco_Scanner *dev = handle;
size_t size;
int buf_offset; /* offset into buf */
DBG (DBG_proc, "sane_read: enter\n");
*len = 0;
if (!(dev->scanning))
{
/* OOPS, not scanning */
return do_cancel (dev);
}
if (dev->bytes_left <= 0)
{
return (SANE_STATUS_EOF);
}
buf_offset = 0;
do
{
if (dev->image_begin == dev->image_end)
{
/* Fill image */
status = teco_fill_image (dev);
if (status != SANE_STATUS_GOOD)
{
return (status);
}
}
/* Something must have been read */
#if 1
assert (dev->image_begin != dev->image_end);
#else
if (dev->image_begin == dev->image_end)
{
DBG (DBG_info, "sane_read: nothing read\n");
return SANE_STATUS_IO_ERROR;
}
#endif
/* Copy the data to the frontend buffer. */
size = max_len - buf_offset;
if (size > dev->bytes_left)
{
size = dev->bytes_left;
}
teco_copy_raw_to_frontend (dev, buf + buf_offset, &size);
buf_offset += size;
dev->bytes_left -= size;
*len += size;
}
while ((buf_offset != max_len) && dev->bytes_left);
DBG (DBG_info, "sane_read: leave, bytes_left=%ld\n", (long) dev->bytes_left);
return SANE_STATUS_GOOD;
}
SANE_Status
sane_set_io_mode (SANE_Handle __sane_unused__ handle, SANE_Bool __sane_unused__ non_blocking)
{
SANE_Status status;
Teco_Scanner *dev = handle;
DBG (DBG_proc, "sane_set_io_mode: enter\n");
if (dev->scanning == SANE_FALSE)
{
return SANE_STATUS_INVAL;
}
if (non_blocking == SANE_FALSE)
{
status = SANE_STATUS_GOOD;
}
else
{
status = SANE_STATUS_UNSUPPORTED;
}
DBG (DBG_proc, "sane_set_io_mode: exit\n");
return status;
}
SANE_Status
sane_get_select_fd (SANE_Handle __sane_unused__ handle, SANE_Int __sane_unused__ * fd)
{
DBG (DBG_proc, "sane_get_select_fd: enter\n");
DBG (DBG_proc, "sane_get_select_fd: exit\n");
return SANE_STATUS_UNSUPPORTED;
}
void
sane_cancel (SANE_Handle handle)
{
Teco_Scanner *dev = handle;
DBG (DBG_proc, "sane_cancel: enter\n");
do_cancel (dev);
DBG (DBG_proc, "sane_cancel: exit\n");
}
void
sane_close (SANE_Handle handle)
{
Teco_Scanner *dev = handle;
Teco_Scanner *dev_tmp;
DBG (DBG_proc, "sane_close: enter\n");
do_cancel (dev);
teco_close (dev);
/* Unlink dev. */
if (first_dev == dev)
{
first_dev = dev->next;
}
else
{
dev_tmp = first_dev;
while (dev_tmp->next && dev_tmp->next != dev)
{
dev_tmp = dev_tmp->next;
}
if (dev_tmp->next != NULL)
{
dev_tmp->next = dev_tmp->next->next;
}
}
teco_free (dev);
num_devices--;
DBG (DBG_proc, "sane_close: exit\n");
}
void
sane_exit (void)
{
DBG (DBG_proc, "sane_exit: enter\n");
while (first_dev)
{
sane_close (first_dev);
}
if (devlist)
{
free (devlist);
devlist = NULL;
}
DBG (DBG_proc, "sane_exit: exit\n");
}