sane-backends (1.0.27-2) UNRELEASED; urgency=medium * debian/control: - Remove obsolete section about sane-backends-extras. -- Jörg Frings-Fürst Sun, 02 Sep 2018 19:02:30 +0200 sane-backends (1.0.27-1) unstable; urgency=medium * Upload to unstable (Closes: #905838, #905913). * debian/control: - Change Breaks to Conflicts for binary package libsane1 (Thanks to Jeremy Bicha ). -- Jörg Frings-Fürst Fri, 31 Aug 2018 11:00:57 +0200 sane-backends (1.0.27-1~experimental6) experimental; urgency=medium * Refresh symbols file for sparc64. * Rewrite debian/watch for gitlab (Thanks to Sebastiaan Couwenberg ). * Declare compliance with Debian Policy 4.1.5 (No changes needed). * Replace manual installation of systemd files with installation via dh_installsystemd (Closes: #905275). -- Jörg Frings-Fürst Fri, 03 Aug 2018 18:17:11 +0200 sane-backends (1.0.27-1~experimental5) experimental; urgency=medium * debian/rules: - Add rule to enable --enable-parport-directio for all architectures except hurd-i386. * debian/control: - Fix FTBFS on kfreebsd-*: + Exclude libsnmp-dev from Build-Depends for kfreebsd-any. - Change VCS-* to point to the new repository. * Refresh symbols files for the following architectures: - arm64, hppa, m68k, mips, mips64el, mipsel, powerpc, powerpcspe, ppc64, ppc64el, s390x, sh4. * Refresh debian/patches/0100-source_spelling.patch to fix typo in backend/apple.c. -- Jörg Frings-Fürst Thu, 31 May 2018 08:48:38 +0200 sane-backends (1.0.27-1~experimental4) experimental; urgency=medium * Change to my new email address. * debian/rules: - Add override_dh_autoreconf to prevent removal of libtool.m4 (Closes: #887032). - Remove outdated configure parameter --enable-translations. - Add configure parameter --enable-parport-directio for better parallel port handling. - Rename configure parameter --with-docdir to --docdir. - Fix source directory for backend-writing.txt. * debian/copyright: - Use secure copyright format URI. * Migrate to debhelper 11: - Change debian/compat to 11. - Bump minimum debhelper version in debian/control to >= 11. * Declare compliance with Debian Policy 4.1.4: - Remove the RUN parameter from /etc/default/saned and /etc/init.d/saned in compliance with Debian Policy Manual section 9.3.3.1. * Refresh debian/patches/0100-source_spelling.patch. * New debian/patches/0715-20-sane.hwdb_multi-arch.patch: - Remove buildtime from 20-sane.hwdb to make the file ready for multi-arch. (Closes: #880391) * debian/libsane1.README.Debian: - Replace ConsoleKit with ConsoleKit/systemd-logind (Closes: #872364). * debian/control: - Add libsnmp-dev to Build-Depends to enable SNMP support. -- Jörg Frings-Fürst Sat, 14 Apr 2018 13:30:56 +0200 sane-backends (1.0.27-1~experimental3) experimental; urgency=medium * debian/control: - Drop outdated Recommends libsane-extras-dev to libsane-dev binary package (Closes: #868265). - Drop outdated texlive and texlive-latex-extra Build-Dependency. * debian/rules: - Drop create and install the /etc/sane.d/dll.d directory. - Move rules from override_dh_install-arch and override_dh_auto_install-arch to override_dh_install-indep and override_dh_auto_install-indep to build the arch all packages without error (CLoses: #870455). - At dh_systemd_enable use debian/saned.socket instead saned.socket. - Use DEB* vars via default.mk instead own functions. * Move libsane-common.install.in to libsane-common.install. * debian/copyright: - Add year 2017 for debian/*. * New debian/patches/0150-genesys-Fix-use-of-uninitialized-variable.patch: - Initializing usb_mode (Closes:# 869673). Thanks to Florian Lindemann and Olaf Meeuwissen . * Move install of man pages from debian/rules to libsane-common.manpages and sane-utils.manpages (Closes: #872366). * Move umax_pp.5 from libsane-common to sane-utils. * debian/sane-utils.saned.init: - Add parameter to --retry at the stop section (Closes: #871543). * libsane1.README.Debian: - Remove references to the libsane-extras package. * Correct typos in the previous changelog entry. * Declare compliance with Debian Policy 4.1.1 (No changes needed). * Move rm_conffile from libsane-common.preinst to libsane-common.maintscript. -- Jörg Frings-Fürst Sat, 28 Oct 2017 13:26:26 +0200 sane-backends (1.0.27-1~experimental2) experimental; urgency=medium * debian/rules: - Rename libsane.udev to libsane1.udev to make sure that 60-libsane1.rules is actually created (Closes: #868312). * Rename libsane.udev to libsane1.udev in TROUBLESHOOTING.Debian and libsane1.README.Debian. * debian/control: - Add Breaks and Replaces against libsane to libsane1 binary package (Closes: #868308). - Remove outdated Recommends libsane-extras to libsane1 binary package (Closes: #868265). - Remove [!hurd-i386] from libusb-1.0-0-dev Build-Dependency. * debian/sane-utils.postrm: - Add set -e and silence update-inetd calls with "|| true". * Regenerate symbols files from build logs (Closes: #868309). * Use the hwdb+udev format (Closes: #869244): - debian/rules: Call sane-desc with -m udev+hwdb and -m hwdb, disable -m udev+acl call in override_dh_installudev-arch. - New file libsane1.dirs for /lib/udev/hwdb.d/. * Drop both dh-autoreconf/dh-systemd from both Build-Depends and dh command line as both are enabled by default for dh compat level 10. * Drop --parallel from the dh command line because parallel builds are enabled by default for dh compat level 10. * Drop .la files from libsane1.install (Closes: #868307). -- Jörg Frings-Fürst Fri, 28 Jul 2017 13:53:30 +0200 sane-backends (1.0.27-1~experimental1) experimental; urgency=medium * New upstream release - sane.ps is not longer included (Closes: #818544). - Fix a timing issue on USB3 hardware (Closes: #792465). - Support CanoScan LiDE 120 (Closes: #853873). - Refresh patches: + 0020-nousbtest.patch + 0025-multiarch_manpages_libdir.patch + 0705-kfreebsd.patch + 0710-sane-desc.c_debian_mods.patch - Remove patches applied upstream: + 0005-libsane_deps.patch + 0010-unneeded_doc.patch + 0015-frontend_libs.patch + 0030-ppc64el.patch + 0100-source_spelling.patch + 0105-hp3900.patch + 0110-dll_backend_conf.patch + 0115-license_typo.patch + 0120-typo.patch + 0125-multiarch_dll_search_path.patch + 0135-saned-remotescanners.patch + 0500-CVE-2017-6318.patch + 0605-man_typo.patch + 0700-mk_reproducible_results.patch * New debian/patches/0140-avahi.patch - Avoid assertion failure when net_avahi_init failed (Closes: #861112). * New debian/patches/0145-avahi.patch: - Fix race condition (Closes: #743420). * debian/rules: - Remove outdated configure flag --enable-libusb_1_0. - Add new configure flag --withusb. - Use dh_auto_configure instead of ./configure. * Remove outdated debian/libsane-dev.NEWS (Closes: #852842). * debian/sane-uitls.postinst: - Add "|| true" after adduser call to continue installation if adduser fails (Closes: #860078). * Refresh debian/libsane.symbols. * New README.source to explain the branching model used. * Use the automatic debug symbol packages: - Remove libsane-dbg section from debian/control. - Remove override_dh_strip from debian/rules. * Declare compliance with Debian Policy 4.0.0. (No changes needed). * debian/saned.socket: - Change MaxConnections to the default value of 64 (Closes: 850649). * Refresh debian/copyright. * Rename libsane to libsane1 to match with the soname. * Remove useless *.lintan-overrides. * Remove autopkgtest: - The test needs networking which isn't available on the buildds. -- Jörg Frings-Fürst Tue, 20 Jun 2017 23:17:47 +0200 sane-backends (1.0.25-4.1) unstable; urgency=medium * Non-maintainer upload. * Correct missing error handler in (generated) prerm script by dropping the "error" handler entirely; it was only printing a generic message anyway. (Closes: #862334) -- Chris Lamb Sun, 21 May 2017 10:04:48 +0200 sane-backends (1.0.25-4) unstable; urgency=medium * CVE-2017-6318: - New debian/patches/0500-CVE-2017-6318.patch + cherry-picked from upstream to fix memory corruption and information leakage (Closes: #854804). -- Jörg Frings-Fürst Wed, 19 Apr 2017 12:07:38 +0200 sane-backends (1.0.25-3) unstable; urgency=medium * debian/rules: - Fix FTBFS when building with 'dpkg-buildpackage -A' (Closes: #806104): + Split file into *-arch and *-indep parts. + Move "empty dependency_libs in all .la files" to override_dh_makeshlibs-arch. + Move installing of doc files for libsane-dev to override_dh_installdocs-arch. + New debian/libsane-dev.dirs. * Drop package libsane-bin binary package (Closes: #820964): - Remove libsane-bin binary package section, remove it from reverse dependencies of other packages in debian/control. - Remove debian/libsane-bin.*. - New debian/NEWS.Debian. * debian/patches: - Refresh and fix new typos: + 0100-source_spelling.patch + 0605-man_typo.patch. - New 0135-saned-remotescanners.patch: + Add patch to allow saned to report network-attached devices (Closes: #821255). Thanks to Dhionel Díaz . * debian/watch: - Bump version to 4 (no changes required). * debian/control: - Bump Standards-Version to 3.9.8 (no changes required). - Change Vcs-Browser to secure URI. - Add lsb-base to Depends for sane-utils. * Add year 2016 for debian/* in debian/copyright. * debian/sane-utils.saned.init: - Fix handling of stop and restart actions (Closes: #829244). Thanks to Chris Lamb . * Remove unused lintian overrides. * Migrate to debhelper 10: - Change debian/compat to 10. - Bump minimum debhelper version in debian/control to >= 10. - Refresh debian/patches to add changes in Makefile.am: + 0005-libsane_deps.patch + 0010-unneeded_doc.patch + 0015-frontend_libs.patch + 0025-multiarch_manpages_libdir.patch + 0125-multiarch_dll_search_path.patch - Refresh debian/libsane.shlibs - Refresh debian/libsane.symbols -- Jörg Frings-Fürst Sat, 10 Dec 2016 13:45:15 +0100 sane-backends (1.0.25-2) unstable; urgency=medium * Undelete, refresh and rename debian/patches/ 0125-multiarch_dll_search_path.patch (Closes: #804240). * debian/rules: - Remove "UPSTREAM_VERSION" and use "VERSION" instead. -- Jörg Frings-Fürst Sat, 07 Nov 2015 08:50:49 +0100 sane-backends (1.0.25-1) unstable; urgency=medium * New upstream release (Closes: #740256). * Refresh patches: - debian/patches/0005-mk_reproducible_results.patch - debian/patches/001-scanimage_manpage.patch - debian/patches/ppc64el.patch - debian/patches/unneeded_doc.patch - debian/patches/libsane_deps.patch - debian/patches/frontend_libs.patch - debian/patches/multiarch_manpages_libdir.patch - debian/patches/dll_backend_conf.patch - debian/patches/sane-desc.c_debian_mods.patch * Remove patches applied upstream: - debian/patches/0105-artec_missing_home_environment.patch - debian/patches/multiarch_dll_search_path.patch - debian/patches/fix-FTBFS-format-not-a-string-literal-error.patch - debian/patches/kodakaio.patch - debian/patches/saned.man.patch - debian/patches/man-page-spelling.patch - debian/patches/source-spelling.patch - debian/patches/hp5370c.patch - debian/patches/out_of_bounds.patch - debian/patches/0500-systemd_configure.patch - debian/patches/0100-usb3-corrections.patch * Remove obsolete lintian-overrides. * Rename and reorder patches. * New debian/patches/0100-source_spelling.patch: - Correct typo in backend/hp-scl.c * debian/libsane-common.postrm: - Move #DEBHELPER# token to the end of the script. * debian/libsane-common.preinst: - Use dpkg-maintscript-helper to remove obsolete configuration file /etc/sane.d/v4l.conf during upgrade (Closes: #803535). * debian/rules: - Remove parameter -c0 from dh_makeshlibs call. -- Jörg Frings-Fürst Mon, 02 Nov 2015 09:04:17 +0100 sane-backends (1.0.24-14) unstable; urgency=medium * debian/TROUBLESHOOTING.Debian: - Add troubleshooting section for cases where the device file system does not support ACLs (Closes: #789593). * debian/control: - To prevent error messages on startup, disable snmp by removing libsnmp-dev from Build-Depends (Closes: #787567). * debian/sane-utils.lintian-overrides: - Add maintainer-script-should-not-use-adduser-system-without-home. * Architecture-dependent binaries (Closes: #786923): - debian/control: + New package libsane-bin: Move architecture-dependent binaries from libsane-dev to libsane-bin. + Remove useless build dependency "dh-exec (>=0.3)". - debian/rules: + Delete command to move sane-config to sane-config.${DEB_HOST_MULTIARCH}. - New debian/libsane-dev.preinst: + Remove /usr/bin/sane-config.*. + Remove symbolic link to /usr/bin/sane-config. -- Jörg Frings-Fürst Sun, 30 Aug 2015 19:02:57 +0200 sane-backends (1.0.24-13) unstable; urgency=medium * debian/rules: - Move architecture-dependent file sane-config to sane-config.${DEB_HOST_MULTIARCH} (Closes: #786923). * debian/control: - Add "dh-exec (>=0.3)" to Build-Depends. dh-exec is required for the new file libsane-dev.links. * New debian/libsane-dev.links: - Create link from sane-config.${DEB_HOST_MULTIARCH} to sane-config. * New debian/upstream/metadata: - Add some DEP-12 upstream metadata. -- Jörg Frings-Fürst Wed, 27 May 2015 12:25:28 +0200 sane-backends (1.0.24-12) unstable; urgency=medium * debian/sane-utils.postinst: - Fix home directory move (Closes: #785709). * debian/patches/0005-mk_reproducible_results.patch: - Build sane.ps without comments containing date/time. * New debian/patches/0105-artec_missing_home_environment.patch: - Test the environment variable $HOME before use (Closes: #786452). * debian/control: - Add "Multi-Arch: same" to package libsane-dev to make it co-installable (Closes: #786560). * New debian/sane-utils.links: - Add a link from /dev/null to /lib/systemd/system/saned.service to prevent start via fallback script /etc/init.d/saned. -- Jörg Frings-Fürst Mon, 25 May 2015 09:23:16 +0200 sane-backends (1.0.24-11) unstable; urgency=medium * debian/control: - Add dpkg (>= 1.15.7.2) to Pre-Depends of package libsane-common since dpkg needs to be installed for the rm_conffile command to work (Closes: #784763). * debian/libsane-common.preinst: - Fix syntax for calling dpkg-maintscript-helper. -- Jörg Frings-Fürst Fri, 08 May 2015 22:02:11 +0200 sane-backends (1.0.24-10) unstable; urgency=high * New debian/TROUBLESHOOTING.debian: - Add part for "usbfs: interface 1 claimed by usblp while ‘scanimage’ sets config #1 (Closes: #726588). * Add reference to TROUBLESHOOTING.debian in debian/README.debian. * New debian/patches/001-scanimage_manpage.patch: - Add remark for parameter to manpage (Closes: #418630). * New debian/patches/0005-mk_reproducible_results.patch: - Make builds reproducible. * debian/control: - On package libsane-dev change Depends from libgphoto2-2-dev to libgphoto2-dev (auto-libgphoto2 transition) (Closes: #783822). - On package libsane remove package hpoj from Suggests. - Remove useless replaces because latest release in stable is 1.0.22-7: + sane-utils: libsane (<< 1.0.11-4) + libsane-common: libsane (<< 1.0.22-4~) + libsane: libsane-extras (<< 1.0.18.14) + libsane-dev: libsane-extras-dev (<< 1.0.18.14) + libsane-dbg: libsane-extras-dbg (<< 1.0.18.14) - Remove "libv4l-dev [linux-any]" from Build-Depends and Depends. - To enable net SNMP, add libsnmp-dev to Build-Depends. - To autodetect network scanners in kodakaio, add libcups2-dev to Build-Depends. - Remove unnecessary *-dev and pkg-config from Depends of libsane-dev. * debian/rules: - Enable pnm backend for testing. - Remove override_dh_builddeb because xz compression is now standard. - Add configure parameter --without-vl4 to disable v4l backend: + The backend was written for kernel 2.4 and v4l, now we are at kernel 3.16 and v4l2 (Closes: #446015). - Remove configure parameter -with-snmp=no to enable net SNMP. * debian/saned@.service: - Remove Alias from [Install] section (Closes: #778268). * sane-utils.[postinst|postrm]: - Replace fixed path with a POSIX-compliant shell function to check the existence of a command. * Add autopkgtests: - debian/control: + Add Testsuite: autopkgtest. - New debian/tests/control. - New debian/tests/start-net: + Test network interface activation with systemd. * Add symbols file: - debian/rules: Rewrite override_dh_makeshlibs. * Comment out "set -e" at debian/sane-utils.postrm to fix some minor errors during piuparts. * debian/saned@.service: - Change StandardInput=socket to StandardInput=null to enable working over network (Closes: #782971). * debian/libsane-common.preinst: - Remove oldstyle rm_conffile() function. - Remove obsolete transition from the old-style udev setup. - Add removal for obsolete /etc/sane.d/v4l.conf via dpkg-maintscript-helper command rm_conffile. -- Jörg Frings-Fürst Fri, 08 May 2015 11:01:35 +0200 sane-backends (1.0.24-9) unstable; urgency=medium * debian/sane-utils.postinst: - Correct typo and add missing -q option to grep (Closes: #773826). Thanks to "Nelson A. de Oliveira" . - Add start/stop around the move of the home directory if scanbd is running during postinst (Closes: #774941). Thanks to "Olaf Meeuwissen" . * debian/rules: - Add line to extract the version from debian/changelog. - Add version string to dpkg-gensymbols. * debian/copyright: - Add year to 2015 on my debian/* tag. -- Jörg Frings-Fürst Sat, 10 Jan 2015 13:56:10 +0100 sane-backends (1.0.24-8) unstable; urgency=medium * New debian/patches/0100-usb3-corrections.patch: - Cherry-picked from upstream to address USB3/xhci problems (Closes: #738592). * debian/saned@.service: - Move Alias to section [Install] (Closes: #773371). -- Jörg Frings-Fürst Sat, 27 Dec 2014 09:36:22 +0100 sane-backends (1.0.24-7) unstable; urgency=medium * debian/rules: - Split dh_installinit in two parts for systemd and SysV-style. - Install systemd files without dh to prevent side effects (Closes: #773320). - Override dh_systemd_enable to not enable saned.socked. * debian/sane-utils.lintian-overrides: - Override systemd-no-service-for-init-script. * debian/sane-utils.postrm: - Add purge for the manually installed files. * debian/sane-utils.README.Debian: - Add instructions for use with systemd. * debian/sane-utils.saned.default: - Add note for enabling under systemd. -- Jörg Frings-Fürst Wed, 17 Dec 2014 09:18:47 +0100 sane-backends (1.0.24-6) unstable; urgency=medium * Revert changes from 1.0.24-5. * Rename sane-utils.saned.service to sane-utils.saned@.service to install it as template (Closes: #769196). * For test for newer versions of systemd: - New debian/patches/0500-systemd_configure.patch + Add part into configure.in to find systemd >=209 - debian/control: + Add autoconf and libsystemd-dev to Built-Depends. - debian/rules: + Add autoconf before running configure to build the patched configure script. - Thanks to Michael Biebl . * Change sane-utils.saned@.service and sane-utils.saned.socket for running as template (Closes: #772955). * debian/sane-utils.postinst: - Add part to move the homedir from /home/saned to /var/lib/saned. (Closes: #665915) * New debian/sane-utils.lintian-overrides: - Override postrm-contains-additional-updaterc.d-calls. -- Jörg Frings-Fürst Sat, 13 Dec 2014 11:20:55 +0100 sane-backends (1.0.24-5) unstable; urgency=medium * debian/rules: - change saned.service to saned@.service to install it as template (Closes: #769196). -- Jörg Frings-Fürst Wed, 10 Dec 2014 11:50:44 +0100 sane-backends (1.0.24-4) unstable; urgency=medium * debian/rules: - Move the creation of /etc/sane.d/dll.d to libsane-common. * Move libsane.(postrm|preinst) to libsane-common.* to handle in the right package. (Closes: #766340) * Remose useless ( < "1.0.19-25" ) from libsane-common.preinst. * debian/patches: - New typo.patch: + Correct typo in backend/gennesys.conf.in. (Closes: #743848) Thanks to Jakub Wilk . - New hp3900.patch: + Set startup gamma to the standalone default. (Closes: #629470) Thanks to Peter Walser . - New hp5370c.patch: + Improved recognizability.(LP: #1080787) - New out_of_bounds.patch: + Prevent some out-of-bounds. * debian/control: - Change Build-Depends from the transitional package libgphoto2-2-dev to libgphoto2-dev. (Closes: #736451) -- Jörg Frings-Fürst Mon, 27 Oct 2014 22:36:01 +0100 sane-backends (1.0.24-3) unstable; urgency=medium * debian/rules: - Revert moving of HTML documentation to previous method to fix FTBFS and simply delete duplicate HTML files afterwards. (Closes: #765339) -- Jörg Frings-Fürst Tue, 14 Oct 2014 14:25:25 +0200 sane-backends (1.0.24-2) unstable; urgency=medium * New Maintainer. (Closes: #764198) * debian/control: - Set myself as Maintainer. - Add missing Vcs-* fields. - Bump Standards-Version to 3.9.6 (no changes required). - Add dh-systemd to Build-Depends. * debian/copyright: - Rewrite into machine-readable format. - Add myself to the list of authors for debian/*. * debian/sane-utils.saned.init: - Replace avahi with avahi-daemon to make it systemd- compatible. (Closes: #731610) - Add fancy lsb output. (Closes: #676845) Thanks to Dirk Sandbrink . * debian/libsane/README.Debian: - TROUBLESHOOTING section: Add handling of "HP ScanJet 3400 C type C7720A" on Device busy message. (Closes: #653857) Thanks to Joost van Baal-Ilić . * debian/sane-utils.postinst: - Set the home directory to /var/lib/saned at adduser call. (Closes: #665915) * debian/rules: - libsane-common: Correct moving of HTML files to prevent duplicate files within the package. - Add systemd to dh commandline. - Manuelly install the systemd .socket file. * Add systemd support: - New file sane-utils.saned.system. - New file sane-utils.saned.socket. * Move /etc from libsane to libsane-common. -- Jörg Frings-Fürst Tue, 14 Oct 2014 08:57:02 +0200 sane-backends (1.0.24-1.2) unstable; urgency=medium * Non-maintainer upload. * update config.* without dh-autoreconf because of local patches to build on ppc64el. (Closes: #759289) -- Andreas Barth Sat, 30 Aug 2014 11:57:08 +0000 sane-backends (1.0.24-1.1) unstable; urgency=medium * Non-maintainer upload. * Fix FTBFS for binary-arch builds: + Install examples through debian/libsane-common.examples. + Use proper source paths for sane.ps and backend-writing.txt; also fix the source path for the HTML files installed into libsane-common. * Clean up debian/changelog. -- John Paul Adrian Glaubitz Sat, 18 Jan 2014 21:07:24 +0100 sane-backends (1.0.24-1) unstable; urgency=low * New upstream release. * New maintainer. (Closes: #688531) * Disable USB testing since it (probably) doesn't work on autobuilders. * Fixed a bunch of lintian warnings. * Change architecture for libsane-common from "any" to "all". -- Mark Buda Sun, 24 Nov 2013 10:05:18 -0500 sane-backends (1.0.23-3) unstable; urgency=low * QA upload. * Revert move to libtiff5-dev. -- Rene Engelhard Sat, 06 Jul 2013 15:20:16 +0200 sane-backends (1.0.23-2) unstable; urgency=low * QA upload. * Add sane-desc.c_debian_mods.patch to series file. (Closes: #714993) -- Markus Koschany Fri, 05 Jul 2013 11:52:37 +0200 sane-backends (1.0.23-1) unstable; urgency=low * QA upload. * Upload to unstable. * This package has been orphaned. Set maintainer to the Debian QA Group. * Bump compat level to 9 (was 5) and require debhelper >= 9. * debian/control: + sane-utils: Inherit Section: graphics from source package sane-backends. + Remove versioned dependencies. They are trivially satisfied. * Drop the following patches. They are merged upstream now. + fix_v4l_build.patch + hurd_path_max_fix.patch + sane_desc_udev+acl.patch + scanimage_man_batch_start.patch + udev_usb_suspend.patch + xerox_mfp_add_scx_4623fw.patch + xerox_mfp_fix_usb_device.patch * Drop disable_rpath.patch because the RPATH is already removed by chrpath in debian/rules. * Rebase and refresh all other patches against the new upstream relase. * debian/rules: + Simplify debian/rules by using dh sequencer. + Build with --parallel and with autotools_dev. + Enable all hardening build flags. + Install umax_pp with sane-utils.install. * Build-Depend on libtiff5-dev. Thanks to Michael Terry for the patch. (Closes: #681079) * Build-Depend on libusb-1.0-0-dev and enable libusb1.0 support in debian/rules. Thanks to Martin Pitt for the report and Whoopie for the patch. (Closes: #687137) -- Markus Koschany Thu, 04 Jul 2013 17:41:47 +0200 sane-backends (1.0.23-0.1~experimental1) experimental; urgency=low * Non-maintainer upload. * New upstream release. -- John Paul Adrian Glaubitz Sat, 23 Feb 2013 20:12:58 +0100 sane-backends (1.0.22-7.4) unstable; urgency=low * Non-maintainer upload. * Compress all binaries with xz to free up some space on CD#1. -- Cyril Brulebois Mon, 17 Sep 2012 16:44:07 +0200 sane-backends (1.0.22-7.3) unstable; urgency=low * Non-maintainer upload. * Fix build failure on kFreeBSD. (Closes: #680234) -- Michael Gilbert Sun, 15 Jul 2012 17:07:15 -0400 sane-backends (1.0.22-7.2) unstable; urgency=low * Non-maintainer upload. * Set sane-utils as 'Multi-Arch: foreign'. (Closes: #675797) -- Michael Gilbert Thu, 28 Jun 2012 16:53:15 -0400 sane-backends (1.0.22-7.1) unstable; urgency=low * Non-maintainer upload. * Fix pending l10n issues. Debconf translations: + Catalan; (Innocent De Marchi). (Closes: #646505) + Slovak (Slavko). (Closes: #639235) + Polish (Michał Kułach). (Closes: #658351) -- Christian Perrier Wed, 28 Mar 2012 07:39:00 +0200 sane-backends (1.0.22-7) unstable; urgency=low * debian/patches/sane-desc.c_debian_mods.patch: + Updated; do not output a timestamp as part of the udev rules file header, it is a source of conflict for MultiArch. -- Julien BLACHE Mon, 21 Nov 2011 15:39:26 +0100 sane-backends (1.0.22-6) unstable; urgency=low * debian/control: + Fix ibcam-dev -> libcam-dev typo. -- Julien BLACHE Thu, 21 Jul 2011 17:54:48 +0200 sane-backends (1.0.22-5) unstable; urgency=low * debian/control: + Replace explicit architecture lists with appropriate architecture wildcards; patch from Robert Millan. (Closes: #634518) + Use kfreebsd-any architecture wildcard for libcam-dev in libsane-dev's Depends field, getting rid of the custom libcam-dev substvar. + Use linux-any architecture wildcard for udev | makedev, acl in libsane's Depends field, gettind rid of the custom udev substvar. * debian/rules: + Remove custom libcam-dev and udev substvars in dh_gencontrol call. -- Julien BLACHE Wed, 20 Jul 2011 19:52:51 +0200 sane-backends (1.0.22-4) unstable; urgency=low * Convert for MultiArch. * debian/control: + Bump debhelper build-dep to >= 8.1.3 for multiarch. + Add Pre-Depends: ${misc:Pre-Depends} to libsane. + Tag libsane with Multi-Arch: same. + New Multi-Arch: foreign libsane-common binary package. + Add libsane-common dependency to libsane. * debian/rules: + Use multiarch path. + libsane.install.in is now libsane-common.install.in. + libsane.docs is gone. + Create the multiarch pkgconfig directory and install the .pc file here. + Stop creating the gt68xx firmware directory in libsane. + Move HAL FDI file to libsane-common. + Disable SNMP support explicitly (needs Net-SNMP 5.6). * debian/libsane-dev.install: + Adapt for multiarch. * debian/libsane.install.in -> debian/libsane.install: + Adapt for multiarch, transfer multiarch-incompatible content to libsane-common. * debian/libsane-common.install.in: + Adopt multiarch-incompatible content previously found in libsane. * debian/libsane.links -> debian/libsane-common.links: + Transfer documentation symlinks to libsane-common. * debian/libsane-dev.dirs: + Removed; pkgconfig directory created in debian/rules. * debian/patches/multiarch_dll_search_path.patch: + Added; make /usr/lib/arch_triplet/sane the default location for SANE backends but keep /usr/lib/sane as a fallback for now. * debian/patches/multiarch_manpages_libdir.patch: + Added; use a generic /usr/lib/arch_triplet/sane path for backend location in the man pages (otherwise substituted from LIBDIR). -- Julien BLACHE Mon, 13 Jun 2011 17:07:05 +0200 sane-backends (1.0.22-3) unstable; urgency=low * debian/control: + Bump Standards-Version to 3.9.2 (no changes). * debian/libsane.NEWS: + Added; document the switch to ACLs starting with 1.0.22-1. * debconf translations: + pt_BR.po: update from Eder L. Marques. (Closes: #619612) + nl.po: courtesy of Jeroen Schot. (Closes: #627043) -- Julien BLACHE Thu, 02 Jun 2011 14:57:53 +0200 sane-backends (1.0.22-2) unstable; urgency=low * debian/patches/udev_usb_suspend.patch: + Added; switch to using power/control instead of power/level for device power setting, if available. * debian/patches/xerox_mfp_fix_usb_devices.patch: + Added; fix detection/handling of USB devices in xerox_mfp. (Closes: #617307) * debian/patches/xerox_mfp_add_scx_4623fw.patch: + Added; add IDs for the Samsung SCX-4623FW. * debian/patches/hurd_path_max_fix.patch: + Added; fix build on HURD where PATH_MAX is not defined. (Closes: #616299) * debian/patches/scanimage_man_batch_start.patch: + Added; fix improper documentation of --batch-start. (Closes: #614009) -- Julien BLACHE Sat, 12 Mar 2011 11:32:32 +0100 sane-backends (1.0.22-1) unstable; urgency=low * New upstream release. + epson2: reject scan area settings that would lead to a division by zero. (Closes: #581181) * debian/control: + Bump Standards-Version to 3.9.1 (no changes). + Demote libsane-extras-* to Recommends again. * debian/rules: + Add acl (>= 2.2.49-4) to udev substvar for ACL utilities in /bin. + Use sane-desc -m udev+acl. (Closes: #591767, #612815) * debian/libsane.README.Debian: + Update; mention ConsoleKit and the udev rules now using ACLs. * debian/patches/sane-desc_udev+acl.patch: + Added; compared to experimental, setfacl is now in /bin. * debian/patches/fix_xerox_mfp_color_mode.patch, debian/patches/use_libsane_matched_for_scsi.patch, debian/patches/allow_dll.d_symlinks.patch, debian/patches/saned_exit_avahi_process.patch, debian/patches/xerox_mfp_new_ids.patch, debian/patches/scsi_perfection_2450.patch, debian/patches/scsi_scanjet_4c.patch, debian/patches/genesys_disable_raw_data_log.patch, debian/patches/fix_epson2_commands.patch, debian/patches/fix_epson2_cancel.patch: - removed; merged upstream. -- Julien BLACHE Wed, 16 Feb 2011 19:00:55 +0100 sane-backends (1.0.22~git1.0.21-157-g126c70d-1) experimental; urgency=low * Git snapshot. * debian/rules: + Add dependency on acl to libsane when depending on udev. + Use udev+acl mode when generating udev rules. + debian/patches/sane-desc_udev+acl.patch: + Added; try using ACLs for USB scanners in an effort to deconflict with MFP devices. -- Julien BLACHE Wed, 21 Jul 2010 18:36:37 +0200 sane-backends (1.0.22~git1.0.21-87-g323ed01-1) experimental; urgency=low * Git snapshot. + genesys now has some support for LiDE 100 & 200. (Closes: #586189) -- Julien BLACHE Wed, 23 Jun 2010 18:37:59 +0200 sane-backends (1.0.21-9) unstable; urgency=low * debian/patches/fix_epson2_cancel.patch: + Added; fix handling of scanner errors by sending a cancel command. (Closes: #597922) -- Julien BLACHE Sun, 12 Dec 2010 16:31:25 +0100 sane-backends (1.0.21-8) unstable; urgency=low * debian/patches/fix_epson2_commands.patch: + Added; fix list of supported commands for levels D1 and D2. (Closes: #582066) -- Julien BLACHE Mon, 29 Nov 2010 18:12:16 +0100 sane-backends (1.0.21-7) unstable; urgency=low * debian/patches/genesys_disable_raw_data_log.patch: + Added; disable raw data logging. Raw data logging was enabled upstream at some point before 1.0.21 most probably as an oversight when committing new code. When enabled, a raw.pnm file is left behind in the cwd when using the genesys backend. (Closes: #602995) * debconf translations: + Properly install vi.po, mistakenly put in po/ instead of debian/po in 1.0.21-6. -- Julien BLACHE Mon, 15 Nov 2010 19:00:34 +0100 sane-backends (1.0.21-6) unstable; urgency=low * debian/patches/saned_exit_avahi_process.patch: + Added; exit Avahi process on error/loop termination. * debian/patches/xerox_mfp_new_ids.patch: + Added; add USB IDs for supported machines in xerox_mfp. (Closes: #601748) * debian/patches/scsi_perfection_2450.patch: + Added; add SCSI IDs for the Perfection 2450 via FireWire. (Closes: #601810) * debian/patches/scsi_scanjet_4c.patch: + Added; add SCSI IDs for the ScanJet 4c. (Closes: #601656) * debconf translations: + vi.po: courtesy of Clytie Siddall. (Closes: #601530) -- Julien BLACHE Sat, 06 Nov 2010 11:21:40 +0100 sane-backends (1.0.21-5) unstable; urgency=low * debconf translations: + cs.po: courtesy of Miroslav Kure. (Closes: #598338) + zh_CN.po: courtesy of YunQiang Su (Closes: #599590, #599591). + da.po: courtesy of Joe Dalton. (Closes: #599642) + eu.po: courtesy of Iñaki Larrañaga Murgoitio. (Closes: #599810) + es.po: courtesy of Camaleón. (Closes: #600342) + fi.po: courtesy of Esko Arajärvi. (Closes: #600514) -- Julien BLACHE Mon, 18 Oct 2010 10:08:12 +0200 sane-backends (1.0.21-4) unstable; urgency=low * debconf translations: + it.po: courtesy of Luca Monducci. (Closes: #593722) -- Julien BLACHE Sun, 05 Sep 2010 09:44:28 +0200 sane-backends (1.0.21-3) unstable; urgency=low * debian/control: + Bump Standards-Version to 3.9.0 (no changes). * debian/patches/use_libsane_matched_for_scsi.patch: + Added; use libsane_matched for SCSI scanners rules too. * debian/patches/allow_dll.d_symlinks.patch: + Added; allow symlinks under /etc/sane.d/dll.d. (Closes: #588392) -- Julien BLACHE Fri, 09 Jul 2010 18:21:58 +0200 sane-backends (1.0.21-2) unstable; urgency=low * debian/patches/fix_xerox_mfp_color_mode.patch: + Added; fix xerox_mfp color mode, from upstream. (Closes: #583789) -- Julien BLACHE Tue, 01 Jun 2010 19:34:19 +0200 sane-backends (1.0.21-1) unstable; urgency=low * New upstream release. (Closes: #579254) * Moved to source format 3.0 (quilt). * debian/control: + Removed dpatch build-dep. + Add dependency on pkg-config to libsane-dev. * debian/rules: + Removed dpatch code. + --disable-fork-process -> --enable-pthread. + Install the pkg-config file for sane-backends. * All patches refreshed, tagged with DEP-3 headers. -- Julien BLACHE Mon, 26 Apr 2010 19:59:08 +0200 sane-backends (1.0.20-14) unstable; urgency=low * debian/control: + Depend and build-depend on libjpeg-dev instead of libjpeg62-dev. (Closes: #569240) + Bump Standards-Version to 3.8.4 (no changes). * debian/sane-utils.saned.init: + Add $remote_fs to Required-Start & Required-Stop. * debconf translations: + fr.po: courtesy of Christian Perrier. (Closes: #564595) -- Julien BLACHE Sat, 13 Feb 2010 10:03:12 +0100 sane-backends (1.0.20-13) unstable; urgency=low * debian/patches/34_genesys_gl841_cal_fix.dpatch: + Added; fix calibration on gl841-based scanners. (Closes: #563163) * debconf translations: + ja.po: courtesy of Hideki Yamane. (Closes: #564294) -- Julien BLACHE Sun, 10 Jan 2010 15:21:22 +0100 sane-backends (1.0.20-12) unstable; urgency=low * debian/patches/33_epson2_update.dpatch: + Update epson2 from git HEAD. (Closes: #534746) * debconf translations: + de.po: courtesy of Helge Kreutzmann. (Closes: #562709) + sv.po: courtesy of Martin Bagge. (Closes: #562931) + ru.po: courtesy of Yuri Kozlov. (Closes: #563076) + pt.po: courtesy of Américo Monteiro. (Closes: #563174) -- Julien BLACHE Fri, 01 Jan 2010 12:49:10 +0100 sane-backends (1.0.20-11) unstable; urgency=medium * Urgency set to medium to unbreak saned in testing. * debian/patches/12_saned_polling_fix.dpatch: + Added; unbreak saned's polling loop for more than 1 fds. (Closes: #562248) * debian/patches/13_saned_aliasing_fix.dpatch: + Added; fix strict aliasing issues in saned for gcc 4.4. -- Julien BLACHE Thu, 24 Dec 2009 17:33:35 +0100 sane-backends (1.0.20-10) unstable; urgency=low * debian/libsane.README.Debian: + Updated udev-related information and instructions, added a note about only adding rules for scanners supported by libsane. * debian/sane-utils.saned.init: + Add missing --oknodo in s-s-d stop call in restart case. (Closes: #558648) * debian/sane-utils.templates: + Rework the standalone saned template and mention Avahi explicitly. (Closes: #556877) * debian/patches/22_dll_backend_conf.dpatch: + Updated; use better wording for the comment about the net backend in dll.conf. (Closes: #556912) * debian/patches/32_epson_perfection636.dpatch: + Added; add the Epson Perfection 636 SCSI scanner. (Closes: #555971) -- Julien BLACHE Sat, 12 Dec 2009 11:33:09 +0100 sane-backends (1.0.20-9) unstable; urgency=low * debian/patches/11_udev_147.dpatch: + Added; remove NAME= from SCSI rules as udev 147 complains about it. Also remove support for kernel < 2.6.22. (Closes: #555443) -- Julien BLACHE Mon, 09 Nov 2009 21:01:32 +0100 sane-backends (1.0.20-8) unstable; urgency=low * debian/rules: + Fix nostrip builds, thanks to Tollef Fog Heen. (Closes: #548152) * debian/patches/31_genesys_raw_log_fix.dpatch: + Added; add missing check when logging raw data. Patch by Tollef Fog Heen . (Closes: #548154) -- Julien BLACHE Sat, 26 Sep 2009 11:44:04 +0200 sane-backends (1.0.20-7) unstable; urgency=low * debian/control: + Demote avahi-daemon to a Suggests. (Closes: #543335) + libv4l-dev is not available on hurd-i386 either. (Closes: #545995) * debian/patches/30_xerox_samsung_ids.dpatch: + Added; add USB IDs for various Samsung-branded MFPs. (Closes: #545290) -- Julien BLACHE Fri, 11 Sep 2009 19:16:15 +0200 sane-backends (1.0.20-6) unstable; urgency=low * debian/control: + Bump Standards-Version to 3.8.3 (no changes). * debian/rules: + Empty dependency_libs in all .la files. * debian/patches/10_sanei_usb_update.dpatch: + Added; from git, favour the interface detected by sanei_usb_init(). This helps with some machines like the Canon MP730. -- Julien BLACHE Sat, 29 Aug 2009 16:55:34 +0200 sane-backends (1.0.20-5) unstable; urgency=low * debian/control: + Bump Standards-Version to 3.8.2 (no changes). * debian/patches/08_cardscan_usbids.dpatch: + Added; fix USB IDs for the CardScan 800c. (Closes: #528829) * debian/patches/09_po_update_es_add_gl.dpatch: + Added; update es translation and add new gl translation, courtesy of Miguel Bouzada . * debian/patches/20_disable_rpath.dpatch: + Added; do not use rpath. For some reason this decided to pop up now, even though the previous revision of the package did not suffer from this. Go figure. -- Julien BLACHE Fri, 26 Jun 2009 14:39:41 +0200 sane-backends (1.0.20-4) unstable; urgency=low * debian/rules: + Serialize autotools/patch/configure for parallel builds, now that parallel builds are possible with the upstream build system. (Closes: #506620) * debian/control: + Bump libsane-extras dependencies to 1.0.20.1. * debian/sane-utils.saned.init: + Add status action, taken from iaxmodem. (Closes: #528265) * debian/patches/07_tools_missing_libcam.dpatch: + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI libraries. From upstream via Aurélien JARNO. (Closes: #528594) -- Julien BLACHE Thu, 14 May 2009 12:06:47 +0200 sane-backends (1.0.20-3) unstable; urgency=low * debian/patches/06_cap_always_settable.dpatch: + Added; add back SANE_CAP_ALWAYS_SETTABLE which was mistakenly removed from SANE 1.0.20. (Closes: #527675, #527682) -- Julien BLACHE Fri, 08 May 2009 21:03:56 +0200 sane-backends (1.0.20-2) unstable; urgency=low * Update previous changelog entry with regard to #519101 resolution. * debian/patches/04_udev_rules_fix.dpatch: + Added; fix udev rules, use ATTRS instead of ATTR. (Closes: #527196) * debian/patches/05_saned_avahi_fds_fix.dpatch: + Added; fix a possible net backend hang when saned is run in debug mode. Could also happen in standalone mode, but a lot less likely. -- Julien BLACHE Wed, 06 May 2009 12:02:59 +0200 sane-backends (1.0.20-1) unstable; urgency=low * New upstream release. + Unsupported devices are no longer included in the udev rules. (Closes: #519101) * debian/control: + Bump Standards-Version to 3.8.1 (no changes). + Add build-dep on libv4l-dev. + Add dependency on libv4l-dev to libsane-dev. + Move libsane-dbg to debug section. * debian/rules: + Use DESTDIR at install time. + Remove rpath from sane-find-scanner. * debian/patches/01_missing_pthreads.dpatch: + Added; new build system breaks build when using pthreads. * debian/patches/02_frontends_libs.dpatch: + Added; only link the frontends with the libraries they need. * debian/patches/03_libsane_deps.dpatch: + Added; reduce libsane.so deps to the bare minimum. * debian/patches/11_minimum_linkage.dpatch: + Removed; build system was redone using automake and this isn't needed anymore. * debian/patches/12_new_configure.dpatch: + Removed; not needed anymore, due to #11 going away. * debian/patches/21_sane-config.in_no_rpath.dpatch: + Updated; updated for new build system. * debian/patches/23_unneeded_doc.dpatch: + Updated; updated for new build system. * debian/patches/22_dll_backend_conf.dpatch: + Updated; dll.d support has been merged upstream, update dll.conf header. * debian/patches/01_manpages_fixes.dpatch, 02_pixma_update.dpatch, 03_snapscan_usb_ftok_fix.dpatch, 04_sane-desc_hal_new.dpatch, 05_hp_timing_fix.dpatch, 06_sanei_scsi_attach_fix.dpatch, 07_epson2_be_nice.dpatch, 08_epson2_be_nice_to_saned.dpatch, 09_avision_fixes.dpatch, 10_sm3840_unbreak_sane_open.dpatch, 30_new_saned.dpatch, 31_sanei_pthread_64bit_fix.dpatch, 32_net_backend_standard_fix.dpatch, 33_scanimage_options_fix.dpatch, 40_fujitsu_fixes.dpatch, 41_epjitsu_fixes.dpatch: - removed; fixes and enhancements taken from upstream or merged upstream in this release. -- Julien BLACHE Mon, 04 May 2009 12:45:50 +0200 sane-backends (1.0.19-26) unstable; urgency=low * debian/rules: + Do not generate /etc/modprobe.d/libsane anymore. * debian/libsane.preinst: + Remove obsolete /etc/modprobe.d/libsane conffile. * debian/patches/30_new_saned.dpatch: + Updated; workaround for backends writing to stdin/stderr/stdout when run via inetd, which breaks the network dialog and causes the remote net backend to crash. (Closes: #516982) -- Julien BLACHE Wed, 04 Mar 2009 10:49:42 +0100 sane-backends (1.0.19-25) unstable; urgency=low * debian/rules: + Remove comment bit, breaking configure invocation. * debian/control: + Add ${misc:Depends}. * debian/sane-utils.postrm: + Make the script set -e. * debian/patches/30_new_saned.dpatch: + Updated; (net backend) do not attempt to lock the Avahi polling thread before stopping it, it now produces a deadlock. Looks like a change/fix was made in Avahi. (Closes: #513122) -- Julien BLACHE Wed, 18 Feb 2009 11:50:31 +0100 sane-backends (1.0.19-24) unstable; urgency=low * debian/rules: + Enable use of pthread instead of fork for reader processes. * debian/libsane.postinst: + Remove code dealing with devfs/hotplug/hotplug-ng. * debian/patches/11_minimum_linkage.dpatch: + Update; add $(LIBPTHREAD) to library dependencies where needed. -- Julien BLACHE Sun, 15 Feb 2009 11:50:13 +0100 sane-backends (1.0.19-23) unstable; urgency=low * debian/patches/09_avision_fixes.dpatch: + Updated; fix reader task handling to not signal the whole process group erroneously. * debconf translations: + it.po: courtesy of Luca Monducci. (Closes: #507563) -- Julien BLACHE Tue, 09 Dec 2008 16:14:06 +0100 sane-backends (1.0.19-22) unstable; urgency=low * debian/patches/41_epjitsu_fixes.dpatch: + Added; from CVS, fix double-free issues in epjitsu. (Closes: #506750) -- Julien BLACHE Mon, 24 Nov 2008 15:02:04 +0100 sane-backends (1.0.19-21) unstable; urgency=low * debian/rules: + Use an error handler for saned's init. * debian/sane-utils.postinst: + Added error handler for saned init. (Closes: #493745) * debconf translations: + es.po: courtesy of Ignacio Mondino. (Closes: #499202) -- Julien BLACHE Fri, 19 Sep 2008 10:50:04 +0200 sane-backends (1.0.19-20) unstable; urgency=low * debian/control: + Make sane-utils depend on update-inetd (>= 4.31) which won't break with debconf. * debian/sane-utils.postinst: + update-inetd needs debconf sometimes, so keep debconf enabled until after the update-inetd call. -- Julien BLACHE Fri, 05 Sep 2008 11:04:59 +0200 sane-backends (1.0.19-19) unstable; urgency=low * debian/rules: + Install umax_pp into sane-utils. (Closes: #496833) * debian/patches/40_fujitsu_fixes.dpatch: + Added; upstream backport of fujitsu backend fixes, fixes a string initialization issue in config file parsing, adds color mode for the fi-6130, 6230, 6140, 6240 and fixes fi-6230 hangs at wakeup from powersave mode. (Closes: #494156) Thanks to M. Allan Noah for providing a backport. -- Julien BLACHE Thu, 28 Aug 2008 10:31:35 +0200 sane-backends (1.0.19-18) unstable; urgency=low * debian/patches/10_sm3840_unbreak_sane_open.dpatch: + Added; from CVS, fix the way sane_open() checks for sanei_usb_open() errors. (Closes: #496249) * debconf translations: + ja.po: courtesy of Hideki Yamane. (Closes: #493568) -- Julien BLACHE Wed, 27 Aug 2008 19:58:15 +0200 sane-backends (1.0.19-17) unstable; urgency=low * debian/patches/33_scanimage_options_fix.dpatch: + Added; get the option descriptor for option 0 before getting the value for option 0. This is a standard-compliance fix needed for proper operation with the net backend. * debian/patches/30_new_saned.dpatch: + Updated; fix initialization of runas_{g,u}id and ngroups, preventing failures later on in some cases (saned -a without username). -- Julien BLACHE Tue, 05 Aug 2008 12:10:44 +0200 sane-backends (1.0.19-16) unstable; urgency=low * debian/patches/30_new_saned.dpatch: + Updated; Fix seteuid()/setegid() call order and set supplemental group list. (Closes: #493084) -- Julien BLACHE Thu, 31 Jul 2008 11:46:53 +0200 sane-backends (1.0.19-15) unstable; urgency=low * debian/patches/09_avision_fixes.dpatch: + Enable this patch for real. * debian/patches/31_sanei_pthread_64bit_fix.dpatch: + Updated. -- Julien BLACHE Tue, 22 Jul 2008 23:05:50 +0200 sane-backends (1.0.19-14) unstable; urgency=low * debian/patches/32_net_backend_standard_fix.dpatch: + Updated; fix sane_control_option() in the net backend so as to bring the net backend behaviour back in line with standard backends. This should fix some issues reported with the net backend lately. * debian/patches/01_manpages_fixes.dpatch: + Updated; fix some more hyphen vs. minus sign issues. * debian/rules: + Include debug symbols for sane-utils into libsane-dbg. * debian/copyright: + Update. -- Julien BLACHE Sun, 20 Jul 2008 12:51:25 +0200 sane-backends (1.0.19-13) unstable; urgency=low * debian/libsane.README.Debian: + Fix udev rules filename. (Closes: #490656) * debian/patches/01_manpages_fixes.dpatch: + Updated; fix hyphen vs. minus sign issues reported by lintian. * debian/patches/30_new_saned.dpatch: + Updated; manpage fixes. -- Julien BLACHE Mon, 14 Jul 2008 13:17:44 +0200 sane-backends (1.0.19-12) unstable; urgency=low * debian/control: + Bump Standards-Version to 3.8.0 (no changes). * debian/patches/30_new_saned.dpatch: + Updated; properly terminate child processes when exiting from the debug mode. * debian/patches/32_net_backend_standard_fix.dpatch: + Added; do not reload the option descriptors cache behind the frontend's back in sane_control_option(). Fetch options descriptors in sane_open() so GET_VALUE on option 0 can still work without explicitely getting option descriptor 0 first. * debconf translations: + sv.po: courtesy of Martin Bagge. (Closes: #487369) -- Julien BLACHE Tue, 24 Jun 2008 22:10:35 +0200 sane-backends (1.0.19-11) unstable; urgency=low * debian/patches/30_new_saned.dpatch: + Updated; lock the Avahi thread before stopping it and tearing down the Avahi objects. (Closes: #484464) * debian/patches/09_avision_fixes.dpatch: + Added; from CVS, misc avision backend fixes. (Closes: #474706, #475198) * debconf translations: + ru.po: courtesy of Yuri Kozlov. (Closes: #481656) -- Julien BLACHE Fri, 06 Jun 2008 17:37:28 +0200 sane-backends (1.0.19-10) unstable; urgency=low * debian/sane-utils.postinst: + Make proper use of debconf !@#%$. (Closes: #481442) * debconf translations: + fr.po: update by Christian Perrier. (Closes: #481439) -- Julien BLACHE Fri, 16 May 2008 19:26:48 +0200 sane-backends (1.0.19-9) unstable; urgency=low * debian/sane-utils.postinst: + Do not attempt to remove saned from the scanner group if it isn't part of the group in the first place. (Closes: #481288) * debian/patches/31_sanei_pthread_64bit_fix.dpatch: + Added; from CVS, fix sanei_pthread on 64bit platforms. -- Julien BLACHE Thu, 15 May 2008 18:54:37 +0200 sane-backends (1.0.19-8) unstable; urgency=low * Reupload 1.0.19-7 to unstable. * debconf translations: + pt.po: courtesy of Américo Monteiro. (Closes: #480219) + cs.po: courtesy of Miroslav Kure. (Closes: #480313) + de.po: courtesy of Helge Kreutzmann. (Closes: #480366) + vi.po: courtesy of Clytie Siddall. (Closes: #480483) + fi.po: courtesy of Esko Arajärvi. (Closes: #480550) + fr.po: update by Christian Perrier. -- Julien BLACHE Wed, 14 May 2008 19:13:29 +0200 sane-backends (1.0.19-7) experimental; urgency=low * Introducing new saned & net backend features. + saned can now run as a standalone daemon and offers mDNS/DNS-SD. The net backend can discover saned servers on the (local) network. * debian/patches/01_manpages_fixes.dpatch: + Fix man warnings in sane-config.1 and sane-mustek_pp.5. * debian/patches/30_new_saned.dpatch: + Added; from CVS HEAD, backport new saned and net backend. * debian/sane-utils.README.Debian: + Enhancements, typo fixes. * debian/sane-utils.templates, debian/sane-utils.config, debian/sane-utils.postinst: + Add a debconf question to automatically add the saned user to the scanner group. + Add a debconf question to enable saned as a standalone daemon. * debian/rules: + Enable Avahi support at configure time. + Call dh_installdebconf. + Call dh_installinit. * debian/control: + Build-Depend on po-debconf, libavahi-client-dev (>= 0.6.4). + sane-utils: add ${misc:Depends} to get the appropriate debconf dependencies. + sane-utils: recommend avahi-daemon. + libsane: recommend avahi-daemon. + libsane-dev: depend on libavahi-client-dev. * debian/sane-utils.saned.init, debian/sane-utils.saned.default: + Add an initscript & default file for saned. * debconf translations: + eu.po: courtesy of Piarres Beobide. (Closes: #479380, #479808) + fr.po: courtesy of Christian Perrier. + pt_BR.po: courtesy of Eder L. Marques. (Closes: #479785) + gl.po: courtesy of Jacobo Tarrio. (Closes: #479838) -- Julien BLACHE Wed, 07 May 2008 18:37:07 +0200 sane-backends (1.0.19-6) unstable; urgency=low * debian/patches/08_epson2_be_nice_to_saned.dpatch: + Added; from CVS, be nice to saned and do not pollute fd 0. (Closes: #479052) -- Julien BLACHE Sat, 03 May 2008 16:46:12 +0200 sane-backends (1.0.19-5) unstable; urgency=low * debian/patches/07_epson2_be_nice.dpatch: + Added; from CVS, be nice to other backends and close the scanner device when the device is not recognized (or another error happens). (Closes: #476468) -- Julien BLACHE Sat, 19 Apr 2008 17:16:13 +0200 sane-backends (1.0.19-4) unstable; urgency=low * debian/patches/03_snapscan_usb_ftok_fix.dpatch: + Updated; improve the patch by falling back to ftok() for non-libusb devices. * debian/patches/04_sane-desc_hal_new.dpatch: + Added; add support for newer HAL versions. * debian/patches/05_hp_timing_fix.dpatch: + Added; fix timing issue with HP scanners. (Closes: #472819) * debian/patches/06_sanei_scsi_attach_fix.dpatch: + Added; from CVS, continue to iterate over the list of devices even if an attempt to attach one of the devices fails. * debian/rules: + Generate HAL FDI file for newer HAL versions. (Closes: #472664) * debian/libsane-dev.doc-base: + Fix doc-base section. -- Julien BLACHE Fri, 28 Mar 2008 22:39:17 +0100 sane-backends (1.0.19-3) unstable; urgency=low * debian/patches/01_disable_epson2.dpatch: + Removed; reenable the epson2 backend. * debian/patches/03_snapscan_usb_ftok_fix.dpatch: + Added; work around the usage of ftok() in the snapscan backend. See the patch description for details. (Closes: #466855) -- Julien BLACHE Sat, 15 Mar 2008 16:16:38 +0100 sane-backends (1.0.19-2) unstable; urgency=low * debian/patches/02_pixma_update.dpatch: + Added; update pixma backend from CVS, adding support for - Pixma MP210, MP470, MP520, MP610, MultiPASS MP710 - MP140, MP220, MultiPASS MP740 (untested) - MP970 (experimental, untested) (Closes: #468270) * debian/rules: + Generate and install HAL fdi file. (Closes: #466540) * debian/control: + Add update-inetd dependency for sane-utils. * debian/sane-utils.postinst, debian/sane-utils.postrm: + Add support for update-inetd. (Closes: #426514) * debian/sane-utils.README.Debian: + Document update-inetd usage. -- Julien BLACHE Sat, 01 Mar 2008 14:11:29 +0100 sane-backends (1.0.19-1) unstable; urgency=low * New upstream release. + New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005 and more), hs2p (Ricoh IS400 series) + Fix for the pixma backend. (Closes: #459663) + Regression fix for the avision backend. (Closes: #458478, #458932) * debian/patches/02_hurd_no_plustek_pp.dpatch: + Removed; merged upstream. * debian/patches/11_minimum_linkage.dpatch: + Updated. * debian/patches/12_new_configure.dpatch: + Updated. * debian/control: + Adjust libsane-extras dependencies for 1.0.19. -- Julien BLACHE Tue, 12 Feb 2008 21:44:19 +0100 sane-backends (1.0.19~cvs20071213-5) unstable; urgency=low * debian/control: + Build-Depends: xutils-dev instead of xutils. + Depend on libsane-extras{,-dev,-dbg} to help fix up the buggy udev rules in libsane-extras. + Promote libgphoto2-2-dev to Depends: for libsane-dev. * debian/patches/02_hurd_no_plustek_pp.dpatch: + Added; do not build plustek_pp on Hurd. (Closes: #457378) * debian/patches/12_new_configure.dpatch: + Updated. -- Julien BLACHE Mon, 07 Jan 2008 12:07:27 +0100 sane-backends (1.0.19~cvs20071213-4) unstable; urgency=low * debian/patches/11_minimum_linkage.dpatch: + Updated; add libcam for coolscan & umax, remove it for cardscan. -- Julien BLACHE Mon, 31 Dec 2007 14:11:34 +0100 sane-backends (1.0.19~cvs20071213-3) unstable; urgency=low * debian/control: + Tighten relationship with libsane-extras due to the udev rules renaming. -- Julien BLACHE Fri, 28 Dec 2007 11:45:30 +0100 sane-backends (1.0.19~cvs20071213-2) unstable; urgency=low * debian/rules: + Generate udev rules as debian/libsane.udev, clean as needed. + Use dh_installudev. + Remove libsane-dll.* from /usr/lib/sane; libsane.so and libsane-dll.so are the same backend. * debian/libsane.postinst: + Remove udev installation code. * debian/libsane.preinst: + Added; handle upgrade from previous udev code to dh_installudev. * debian/patches/11_minimum_linkage.dpatch: + Added; only link backends to the libraries they need. * debian/patches/12_new_configure.dpatch: + Added; new configure script. * debian/patches/12_gphoto2_link_backend_only.dpatch: + Removed; obsoleted by 11_minimum_linkage.dpatch. * debian/patches/13_new_configure.dpatch: + Removed; now 12_new_configure.dpatch. -- Julien BLACHE Tue, 25 Dec 2007 22:58:26 +0100 sane-backends (1.0.19~cvs20071213-1) unstable; urgency=low * New CVS snapshot. + New backend: hp3900. * debian/control: + Bump Standards-Version to 3.7.3 (no changes). + Bump libsane-extras{,-dev} dependencies/conflicts/replaces to 1.0.18.13. + Remove module-init-tools recommendation, enforced by udev which is a dependency. * debian/rules: + Remove ${module-init-tools} substvar. -- Julien BLACHE Thu, 13 Dec 2007 21:59:02 +0100 sane-backends (1.0.19~cvs20071028-1) unstable; urgency=low * New CVS snapshot. + All backends now declare OPT_NUM_OPTS of type SANE_TYPE_INT. (Closes: #448162) + Fixed USB IDs for the Epson CX-6600. (Closes: #419349) + Added USB IDs for the Epson DX-6000. (Closes: #442051) * debian/control: + libsane-dev Recommends: libgphoto2-2-dev. -- Julien BLACHE Sun, 28 Oct 2007 11:17:36 +0100 sane-backends (1.0.19~cvs20070730-1) unstable; urgency=low * New CVS snapshot. + Workaround for CONFIG_USB_SUSPEND. (Closes: #434276) * debian/control, debian/rules: + Make libsane depend on makedev | udev on Linux. (Closes: #428220) * debian/libsane.postinst: + Change MAKEDEV invocation to invoke /dev/MAKEDEV instead of /sbin/MAKEDEV. * debian/control: + Do not {build-,}depend on libusb-dev nor libieee1284-dev on hurd-i386. (Closes: #434575) + Use ${binary:Version} instead of ${Source-Version}. * debian/rules: + Do not ignore make distclean errors. * debian/patches/30_sanei_scsi_sg_ioctl.dpatch: + Removed; merged upstream. -- Julien BLACHE Mon, 30 Jul 2007 14:03:13 +0200 sane-backends (1.0.19~cvs20070505-3) unstable; urgency=low * debian/patches/30_sanei_scsi_sg_ioctl.dpatch: + Added; use the SG_IO ioctl interface instead of the asynchronous read/write SG3 interface. This allows the use of SCSI scanners in mixed 32/64bit environments, thanks to the ioctl 32bit compatibility layer taking care of the 32/64bit sg_hdr conversion. (Closes: #420193) If you own a SCSI scanner, please report back on this change; especially if, compared to the previous version (1.0.19~cvs20070505-2): - the scanner backtracks more than it used to with the previous version - you see weird errors OR you see no error and you should be seeing some - performance sucks - resulting image is broken in one way or another - ... -- Julien BLACHE Sun, 20 May 2007 10:46:00 +0200 sane-backends (1.0.19~cvs20070505-2) unstable; urgency=low * debian/patches/01_disable_epson2.dpatch: + Added; disable epson2 backend by default. (Closes: #422697) -- Julien BLACHE Sat, 12 May 2007 10:37:11 +0200 sane-backends (1.0.19~cvs20070505-1) unstable; urgency=low * New CVS snapshot. + New backend: hp5590. * debian/patches/31_epson_remove_check.dpatch: + Removed; merged upstream. -- Julien BLACHE Sat, 05 May 2007 20:37:07 +0200 sane-backends (1.0.19~cvs20070421-1) unstable; urgency=low * debian/control: + Update Build-Depends for the TeXLive migration. + Removed old Conflicts. + Upgrade libsane-extras minimum version to 1.0.18.6. * debian/rules: + Drop hotplug support. + Drop code for Sarge backports. * debian/libsane.postinst: + Remove old hotplug-ng files, code taken from Ubuntu. * debian/libsane.README.Debian, debian/sane-utils.README.Debian: + Removed hotplug notes. * debian/patches/03_usb_perms_664.dpatch: + Removed; merged upstream. * debian/patches/11_hotplug_wait_for_device.dpatch: + Removed; not needed anymore. * debian/patches/30_udev_long_comment_lines.dpatch: + Removed; merged upstream. * debian/patches/32_microtek2_add_check.dpatch: + Removed; merged upstream. * debian/patches/33_manpages_fixes.dpatch: + Removed; merged upstream. -- Julien BLACHE Sat, 21 Apr 2007 13:33:26 +0200 sane-backends (1.0.18-6) unstable; urgency=low * Enable libieee1284 support on kFreeBSD-amd64. (Closes: #413178) * debian/control: + Build-depend on libieee1284-3-dev (>= 0.2.10-5) for all architectures. + libsane-dev depends on libieee1284-3-dev (>= 0.2.10-5) for all architectures. * debian/rules: + Remove the libieee1284-3-dev substitution variable. -- Julien BLACHE Sat, 3 Mar 2007 11:39:33 +0100 sane-backends (1.0.18-5) unstable; urgency=medium * debian/patches/32_microtek2_add_check.dpatch: + Added; Add missing return status check, preventing a segfault later on. (Closes: #398153) * debian/patches/33_manpages_fixes.dpatch: + Added; fix man warnings in some manpages. -- Julien BLACHE Mon, 8 Jan 2007 19:52:22 +0100 sane-backends (1.0.18-4) unstable; urgency=medium * debian/patches/31_epson_remove_check.dpatch: + Added; Remove bogus check in epson backend get_identity2_information() affecting Stylus CX5xxx models. (Closes: #399119, #402444) * debian/sane-utils.README.Debian: + Fix typo, the manpage for saned is in section 8 not 1. * debian/control: + libsane-dbg is Priority: extra. + Remove Uploaders. Thank you Aurélien JARNO for your help during these years. -- Julien BLACHE Sat, 6 Jan 2007 18:46:43 +0100 sane-backends (1.0.18-3) unstable; urgency=low * debian/patches/30_udev_long_comment_lines.dpatch: + Added; split very long comment lines in the udev rules file. (Closes: #376859) * debian/libsane.README.Debian: + Updated; udev no longer sets permissions on /proc/bus/usb/xxx/yyy, /dev/bus/usb/xxx/yyy is used instead now. -- Julien BLACHE Sun, 30 Jul 2006 20:40:09 +0200 sane-backends (1.0.18-2) unstable; urgency=low * debian/control: + Build-Depends: libltdl3-dev, needed to link with libgphoto2-2. + sane-utils Suggests: unpaper. -- Julien BLACHE Tue, 4 Jul 2006 09:09:04 +0200 sane-backends (1.0.18-1) unstable; urgency=low * New upstream release. + New backends: dell1600n_net, hp3500, pixma, stv680. (Closes: #360303) + Canon LiDE 60 USBids added to the genesys description file. (Closes: #366871) * debian/patches/01_usbids.dpatch: + Removed; merged upstream. * debian/patches/26_manpages_spelling_fixes.dpatch: + Removed; merged upstream. * debian/patches/25_glibc_sys_io_h.dpatch: + Removed; merged upstream. * debian/patches/03_usb_perms_664.dpatch: + Updated; the convert-usermap.sh scripts are gone. * debian/patches/04_udev_rules_fix.dpatch: + Removed; merged upstream. * debian/rules: + Use sane-desc to generate the udev rules file and the hotplug data file. + Improve manpage list generation for the libsane package. * debian/control: + Build-Depends: libtiff4-dev, for the dell1600n_net backend. -- Julien BLACHE Mon, 3 Jul 2006 20:30:17 +0200 sane-backends (1.0.17-4) unstable; urgency=low * debian/compat: + Bumped DH_COMPAT to 5. * debian/control: + Bumped Standards-Version to 3.7.2 (no changes). + Build-Depend on debhelper (>= 5.0.0) for DH_COMPAT=5. + New libsane-dbg binary for debugging symbols. (Closes: #366767) * debian/rules: + Tell dh_strip to put debugging symbols into libsane-dbg. -- Julien BLACHE Fri, 26 May 2006 13:40:01 +0200 sane-backends (1.0.17-3) unstable; urgency=low * debian/control: + Add ${libieee1284-3-dev} to libsane-dev Depends. (Closes: #364294) -- Julien BLACHE Sat, 22 Apr 2006 19:58:12 +0200 sane-backends (1.0.17-2) unstable; urgency=low [ Aurélien JARNO ] * debian/control: + Build-depends: libcam-dev on kfreebsd-i386 and kfreebsd-amd64. + Build-depends: !libieee1284-dev on kfreebsd-amd64. + libsane-dev depends: libcam-dev on GNU/kFreeBSD. * debian/patches/25_glibc_sys_io_h.dpatch: + New; check for GNU libc instead of Linux kernel. [ Julien BLACHE ] * debian/patches/02_udev_rules.dpatch: + Removed; coldplugging now works OK, the hotplug script aren't needed anymore. (Closes: #359800) * debian/patches/03_usb_perms_664.dpatch: + Updated. * debian/patches/04_udev_rules_fix.dpatch: + Added; fix udev rules file so that the rules only run for ACTION=add on the usb subsystem. (Closes: #359797) * debian/patches/01_usbids.dpatch: + Added; add Epson Stylus CX7800 USB IDs. (Closes: #350436) * debian/patches/26_manpages_spelling_fixes.dpatch: + Added; various spelling fixes to the manpages. (Closes: #357568) * debian/control: + Removed Conflicts: on very old SANE versions. + Recommends: module-init-tools (>= 3.2.2-1). (Closes: #344541) + Recommends: udev (>= 0.88-1) for a version of udev with working coldplugging support. Let me know if the version can be lowered, thanks. * debian/rules: + Add variable substitution for module-init-tools on Linux. + Add version to the udev variable substitution. -- Julien BLACHE Thu, 13 Apr 2006 21:40:58 +0200 sane-backends (1.0.17-1) unstable; urgency=low [ Julien BLACHE ] * New upstream release. + New backends: hp4200, lexmark, mustek_usb2. + Now ignores EBUSY on set_configuration for real. (Closes: #332281) + Fixed USB IDs for BearPaw 2448 TA Plus to use only lowercase letters. (Closes: #341046) * debian/patches/01_hotplug_usbids.dpatch: + Removed; merged upstream. * debian/patches/02_tools_udev.dpatch: + Removed; merged upstream. * debian/patches/02_udev_rules.dpatch: + Added; add a RUN rule to run the hotplug.d script (for coldplugging). * debian/control: + Build-Depends: xutils as makedepend is now used by the build system. + Adjust conflicts/suggests for libsane-extras. [ Aurélien JARNO ] * debian/patches/03_usb_perms_664.dpatch: + Added; lsusb needs read access to USB devices to work properly. -- Julien BLACHE Sun, 18 Dec 2005 17:09:47 +0100 sane-backends (1.0.16-5) unstable; urgency=low * debian/patches/02_tools_udev.dpatch: + Run the hotplug.d script to ensure a working coldplug. (Closes: #334068) * debian/patches/30_misc_fixes.dpatch: + Fix a typo in sane-find-scanner(1). (Closes: #310333) * debian/patches/34_sanei_usb_ignore_set_config_ebusy.dpatch: + Ignore EBUSY on set_configuration to better accomodate MFC devices. (Closes: #332281) * debian/libsane.postrm: + Remove /etc/udev/rules.d/025_libsane.rules on purge. (Closes: #333569) -- Julien BLACHE Thu, 27 Oct 2005 20:25:16 +0200 sane-backends (1.0.16-4) unstable; urgency=low * debian/patches/02_tools_udev.dpatch: + Fix broken tools/udev/convert-usermap.sh script. -- Julien BLACHE Wed, 28 Sep 2005 22:59:41 +0200 sane-backends (1.0.16-3) unstable; urgency=low * The udev release. Thanks to Marco d'Itri for his help. * debian/patches/02_tools_udev.dpatch: + Added; adds tools/udev from CVS. * debian/rules: + Generate the udev rules file for libsane and install it. + Generate a modprobe blacklist (same as the hotplug blacklist). * debian/libsane.postinst: + Symlink the udev rules file under /etc/udev/rules.d; do that only once. * debian/control: + Recommends: hotplug | udev -- Julien BLACHE Wed, 28 Sep 2005 22:42:38 +0200 sane-backends (1.0.16-2) unstable; urgency=low * debian/patches/11_hotplug_wait_for_device.dpatch: + Bump timeout to 25 seconds. * debian/patches/01_hotplug_usbids.dpatch: + Added; pulled from CVS. (Closes: #323607) * debian/patches/32_plustek_update.dpatch: + Supersedes 32_add_lide25.dpatch; plustek backend update, adds LiDE 25 support and fixes LiDE 20 support. * debian/patches/33_sm3600_update.dpatch: + Added; pulled from CVS, sm3600 adapted to sanei_usb. -- Julien BLACHE Sun, 28 Aug 2005 18:33:18 +0200 sane-backends (1.0.16-1) unstable; urgency=low [ Julien BLACHE ] * New upstream release. + New backends: sm3840, genesys. + Fixed typos in manpages. (Closes: #310332, #310333) * Patches removed (integrated upstream): + 01_hotplug_usbids.dpatch + 02_tools_hotplug-ng.dpatch + 03_manpages_fixes.dpatch + Most of 30_misc_fixes.dpatch + 31_gt68xx_fixes.dpatch + 32_snapscan_update.dpatch + 33_avision_update.dpatch + 34_plustek_update.dpatch + 35_libusbscanner_2.6_fixes.dpatch + 36_sane-find-scanner_message.dpatch + 37_epson_usbids.dpatch * debian/libsane.postinst: + Removed the udev check, it's broken and MAKEDEV now does the Right Thing (tm) on its own. (Closes: #310216) + Remove anything debconf-related. * debian/control: + Bumped Standards-Version to 3.6.2 (no changes). + Update the conflict on libsane-extras. + Downgrade Depends: sane-utils to Recommends: sane-utils now that Sarge has been released. + Drop dependency on debconf. * debian/rules: + Generate sane-backends.pot, patch from Martin Pitt. (Closes: #313527) + Comment call to dh_installdebconf, we don't use debconf anymore. [ Aurélien JARNO ] * DEB_HOST_GNU_SYSTEM replaced by DEB_HOST_ARCH_OS. * Get rid of debian/control.in by using the -V option of dpkg-gencontrol. -- Julien BLACHE Sun, 7 Aug 2005 15:00:05 +0200 sane-backends (1.0.15-10) unstable; urgency=low * debian/patches/01_hotplug_usbids.dpatch: + Updated; added Genius ColorPage Vivid3XE. (Closes: #305993) + Added Microtek ScanMaker 3700. (Closes: #307952) + Added Epson Stylus RX620. (Closes: #308867) * debian/patches/11_hotplug_wait_for_device.dpatch: + Added; try to wait for the device to appear in the FS. (Closes: #302891) * debian/patches/30_misc_fixes.dpatch: + Updated; fixed "device model referenced not duplicated" in the v4l backend. (Closes: #306458) * debian/control.in: + Build-Depend on a fixed libusb. -- Julien BLACHE Sun, 22 May 2005 11:09:19 +0200 sane-backends (1.0.15-9) unstable; urgency=low * debian/patches/22_dll_backend_conf.dpatch: + Process /etc/sane.d/dll.d first, so that those backends will be loaded last. This will prevent buggy extras backends to perturb other backends. * debian/patches/03_manpages_fixes.dpatch: + Fix a typo in sane(7), reported by A Costa. (Closes: #302675) + Fix 3 typos in scanimage(1), also reported by A Costa. (Closes: #302334) -- Julien BLACHE Wed, 20 Apr 2005 16:17:20 +0200 sane-backends (1.0.15-8) unstable; urgency=low [ Aurélien Jarno ] * Drop support for the scanner kernel module. Switch to libusb NOW. + Drop the devfs config file, remove /etc/devfs/conf.d/devfs in libsane.postinst. * Transition to the new hotplug hook scheme (pulled from CVS), which is compatible with both hotplug and hotplug-ng. + Remove /etc/hotplug/usb/libsane.usermap and /etc/hotplug/usb/libusbscanner in libsane.postinst. + Conflicts with libsane-extras (<< 1.0.15.7) to avoid partial upgrades, as 1.0.15.7 is the version compatible with the new hotplug script. [ Julien Blache ] * Added support for GNU/kFreeBSD. (Closes: #297979) + debian/rules: generate control at clean time. + debian/rules: install README.{linux,freebsd} depending on the system. + debian/patches/23_unneeded_doc.dpatch: do not install OS-specific READMEs. + debian/control.in: do not depend on makedev on !linux (via debian/rules). + debian/libsane.postinst: do not create device nodes on !linux. * debian/rules: + Install only the manpages for the backends which have been built. + Cut the head of libsane.usermap to remove the comments pertaining to the old usermap format. * debian/libsane.README.Debian: + Updated to relfect the hotplug changes. * debian/libsane.postinst: + Do not create device nodes when udev is in use. -- Julien BLACHE Sun, 6 Mar 2005 00:36:43 +0100 sane-backends (1.0.15-7) unstable; urgency=low [ Julien BLACHE ] * debian/patches/22_dll.conf_debian.dpatch + Removed; renamed to 22_dll_backend_conf.dpatch. * debian/patches/22_dll_backend_conf.dpatch + Added; adds a Debian-specific comment to the dll.conf file, and patches the dll backend to look for pieces of dll.conf in the /etc/sane.d/dll.d directory; this is a facility for packages providing external backends, like libsane-extras, hpoj and hplip. [ Aurélien Jarno ] * debian/patches/01_hotplug_usbids.dpatch + Added Epson Corp. Stylus CX6600 to libsane.usermap. (Closes: #293082) -- Julien BLACHE Mon, 21 Feb 2005 16:43:41 +0100 sane-backends (1.0.15-6) unstable; urgency=low * debian/control + Recommends: hotplug (was Suggests: hotplug). + Suggests: hpoj, hplip. * debian/rules + Blacklist the scanner module wrt hotplug. * debian/libsane.README.Debian + Explain that the scanner module is going away, and that we're now blacklisting it wrt hotplug upon installation of the package. * debian/patches/01_hotplug_usbids.dpatch + Updated; added Epson Stylus RX-425. * debian/patches/37_epson_usbids.dpatch + Added; adds Epson Stylus RX-425. * debian/patches/30_misc_fixes.dpatch + Updated; added initialization of dev->scanning in coolscan.c. * debian/patches/02_manpages_fixes.dpatch + Added; manpages fixes from esr. * debian/patches/32_snapscan_deinterlacer.dpatch + Removed; renamed to 32_snapscan_update.dpatch. * debian/patches/32_snapscan_update.dpatch + Added; contains all of the previous 32_snapscan_deinterlacer.dpatch, plus it adds support for the Epson Perfection 1270, BenQ 5250C and quality calibration for the Epson Perfection 2480. * debian/patches/22_dll.conf_debian.dpatch + Updated; added the sm3840 backend provided by libsane-extras and the hpaio backend provided by hplip. (Closes: #291435) * debian/patches/38_artec_e+48_conf.dpatch + Added; adds proper configuration for the Umax AstraSlim SE. -- Julien BLACHE Sat, 22 Jan 2005 13:54:58 +0100 sane-backends (1.0.15-5) unstable; urgency=medium * debian/patches/34_plustek_update.dpatch: + Added; pulled from CVS, contains fixes for Epson Perfection 1260 scanners. (Closes: #290029) * debian/patches/35_libusbscanner_2.6_fixes.dpatch: + Added; applied patch from Martin Pitt to use sysfs to determine the device number, instead of guessing it in a semi-broken way. (Closes: #289666) * debian/patches/36_sane-find-scanner_message.dpatch + Added; adds a "make sure your scanner is powered up and plugged in" message to sane-find-scanner. (Closes: #287592) -- Julien BLACHE Wed, 12 Jan 2005 17:48:30 +0100 sane-backends (1.0.15-4) unstable; urgency=medium * debian/control: + Added build-dependency on pkg-config. (Closes: #286140) * debian/patches/13_new_configure.dpatch: + Fixed; remove unwanted autom4te.cache directory from the patch. (Closes: #286143) -- Julien BLACHE Sun, 19 Dec 2004 18:08:23 +0100 sane-backends (1.0.15-3) unstable; urgency=low * debian/patches/31_gt68xx_fixes.dpatch: + Updated; added a fix for Mustek BearPaw 2448 TA/CS Plus scanners. (Closes: #284674) * debian/patches/33_avision_update.dpatch: + Added; improved avision backend from CVS. -- Julien BLACHE Thu, 9 Dec 2004 16:01:50 +0100 sane-backends (1.0.15-2) unstable; urgency=low * debian/patches/01_hotplug_usbids.dpatch: + Added; taken from CVS, adds missing USB IDs to the hotplug scripts. (Closes: #280821, #281003) * debian/patches/31_gt68xx_fixes.dpatch: + Added; taken from CVS, fixes incorrect mode check for some scanners. (Closes: #281061) * debian/patches/30_misc_fixes.dpatch: + Added; miscellaneous fixes from CVS/sane-devel. * debian/patches/32_snapscan_deinterlacer.dpatch: + Added; taken from CVS, adds a deinterlacer filter to the snapscan backend, which is needed to scan at 2400 DPI with some scanners. -- Julien BLACHE Sun, 14 Nov 2004 15:39:36 +0100 sane-backends (1.0.15-1) unstable; urgency=low * New upstream release. + Patch for Microtek Phantom C6 on PowerPC merged upstream. (Closes: #274523) + New backend: niash. * debian/control: + Update conflicts/replaces on libsane-extras 1.0.15.1. * debian/patches/01_libusbscanner.dpatch: + Removed; taken from CVS, included in this version. * debian/patches/02_epson_usbids.dpatch: + Removed; taken from CVS, included in this version. * debian/patches/03_hotplug_usbids.dpatch: + Removed; merged upstream. * debian/patches/11_libtool_unneeded_checks.dpatch: + Removed. * debian/patches/12_gphoto2_link_backend_only.dpatch: + Updated; revert unwanted backend/Makefile.in patch causing an incorrect rpath in /usr/lib/libsane.la. (Closes: #279082) * debian/patches/13_new_configure.dpatch: + Updated. * debian/patches/22_dll.conf_debian.dpatch: + Updated; the niash backend is now part of SANE. * debian/patches/25_saned_man_section.dpatch: + Removed; merged upstream. * debian/patches/26_scanimage_batch.dpatch: + Removed; merged upstream. * debian/patches/27_snapscan-usb_count_urb.dpatch: + Removed; taken from CVS, included in this version. * debian/sane-utils.README.Debian: + Fix reference to /usr/share/doc/libsane/README.Debian.gz (Closes: #278670) -- Julien BLACHE Tue, 9 Nov 2004 23:28:23 +0100 sane-backends (1.0.14-7) unstable; urgency=medium * Co-maintainer upload. * debian/patches/27_snapscan-usb_count_urb.dpatch: + Added, backported from CVS: Don't enforce even number of URB packages on snapscan 1212u_2. (Closes: #250885) * debian/patches/03_hotplug_usbids.dpatch: + Added Epson Corp. Stylus CX6400 to libsane.usermap. (Closes: #293946) -- Aurelien Jarno Mon, 9 Aug 2004 11:17:13 +0200 sane-backends (1.0.14-6) unstable; urgency=medium * Urgency=medium as this revision will fix the upgrade path from Woody. * debian/control: + Removed obsolete gcc-3.3 build-depends. (Closes: #262245) + Upgraded the sane-utils recommendation to a dependency as an upgrade path from Woody. (Closes: #263408) * debian/rules: + Create /etc/hotplug/blacklist.d/libsane to prevent hotplug from loading the no-longer-needed hpusbscsi module. (Closes: #260734) * debian/patches/03_hotplug_usbids.dpatch: + Added; adds HP ScanJet 5300C to libsane.usermap. (Closes: #260736) * debian/patches/26_scanimage_batch.dpatch: + Added; adds possibility to interrupt a batch scan in scanimage by pressing ^D. (Closes: #260230) -- Julien BLACHE Wed, 4 Aug 2004 22:12:40 +0200 sane-backends (1.0.14-5) unstable; urgency=low * debian/patches/02_epson_usbids.dpatch + Put back the USB IDs for the Perfection 1650, remove the USB IDs for the Perfection 1250, which now really fixes the bug. -- Julien BLACHE Sun, 13 Jun 2004 13:48:27 +0200 sane-backends (1.0.14-4) unstable; urgency=low * debian/libsane.postinst + modutils is Required, not Essential; replace kernelversion (provided by modutils) by uname -r | cut. (Closes: #254140) -- Julien BLACHE Sun, 13 Jun 2004 12:12:02 +0200 sane-backends (1.0.14-3) unstable; urgency=low * debian/libsane.postinst + Do not create /dev/usb/scanner* if running a 2.6 kernel. * debian/patches/02_espon_usbids.dpatch + Remove USB IDs for Perfection 1250 and 1260; these scanners are handled by the plustek backend (pulled from CVS). (Closes: #248859) * debian/patches/25_saned_man_section.dpatch + Added; saned goes to /usr/sbin, its manpage should go to section 8. -- Julien BLACHE Fri, 11 Jun 2004 21:37:18 +0200 sane-backends (1.0.14-2) unstable; urgency=low * debian/patches/22_dll.conf_debian.dpatch + Enable the hpoj backend by default. (Closes: #246985, #248379) * debian/patches/01_libusbscanner.dpatch + Pulled from CVS, fixes hotplug's lack of backward compatibility (Closes: #248770) -- Julien BLACHE Thu, 20 May 2004 20:25:18 +0200 sane-backends (1.0.14-1) unstable; urgency=low * New upstream release. + USB IDs for EPSON Stylus CX5400 added. (Closes: #243295) + USB IDs for Nikon CoolScan 5000 added. (Closes: #243792) * debian/hotplug/* + removed, integrated upstream (tools/hotplug). * debian/patches/01_mustek_pp_unified.dpatch + removed, integrated in this release. * debian/patches/02_hp_backend_usb_fix.dpatch + removed, integrated in this release. * debian/rules + install the provided hotplug script and config file. -- Julien BLACHE Sat, 1 May 2004 16:26:47 +0200 sane-backends (1.0.13-4) unstable; urgency=low * debian/patches/02_hp_backend_usb_fix.dpatch + added, pulled from CVS, fixes USB problems on kernel 2.6. (Closes: #242188) * Updated libsane.usermap from CVS. (Closes: #242090) * Updated README.Debian, fixed a couple of typos. -- Julien BLACHE Sun, 11 Apr 2004 10:31:41 +0200 sane-backends (1.0.13-3) unstable; urgency=low * debian/libsane.config, debian/libsane.templates, debian/po: + Removed, we don't use debconf anymore. * debian/postinst: + Fixed the /dev/usb/parport0 typo that should have read /dev/parport0. Thanks to Tore Anderson for catching this one. + Removed anything debconf-related, only purge whatever is left in the debconf DB. (Closes: #224597) -- Julien BLACHE Sat, 20 Dec 2003 18:44:37 +0100 sane-backends (1.0.13-2) unstable; urgency=low * debian/patches: order of the patches changed (slightly). + 01_mustek_pp_unified.dpatch: scan area fixes. -- Julien BLACHE Mon, 1 Dec 2003 19:19:19 +0100 sane-backends (1.0.13-1) unstable; urgency=low * New upstream release. * debian/patches: + 20_net.c_fixes.dpatch : removed, merged upstream. + 21_gt68xx_uhci_fixes.dpatch : ditto. + 04_hp5400_sanei_config2.dpatch : ditto. + 03_new_configure : updated. + 04_mustek_pp_unified: added; with this patch the mustek_pp backend supports both CIS and CCD scanners. (Closes: #190998) * debconf: + Direct users to README.Debian.gz instead of README.Debian . (Closes: #217347) + Added Japanese translation. (Closes: #214040) + Added Dutch translation. (Closes: #218905) + Added German translation, thanks to Dirk Ritter and debian-l10n-german. * debian/sane-utils.README.Debian: + More details about the saned user and group, and the reason why the saned user is not part of the scanner group by default. (Closes: #220024) * debian/devfs/scanner: + Added an example for SCSI devices, thanks to Dirk Ritter. * debian/control: + Standards-Version bumped to 3.6.1 (no changes). * debian/rules, debian/compat: + Switch to DH_COMPAT 4, and moved from dh_movefiles to dh_install. * debian/control, debian/rules: + Build-depend on chrpath and use it to remove rpath from the binaries. -- Julien BLACHE Mon, 24 Nov 2003 18:35:21 +0100 sane-backends (1.0.12-7) unstable; urgency=low * The "Maintainer's birthday" release. * Simplified the needlessly complex debconf questions. Now use a multiselect question instead of 3 independent questions: + debian/libsane.templates: rewritten to use a multiselect type + debian/libsane.config: ditto, try to convert from the older questions, then purge them once done. + debian/libsane.postinst: rewritten to parse the answer from the new debconf thingy. + debian/control: now Depends: debconf (>= 0.5.0) due to the use of db_fset in debian/libsane.config. * debian/libsane.postinst: use ':' as a separator for chown instead of '.'. * debian/libsane.README.Debian: ditto. * debian/control: only Suggests: hotplug. (Closes: #205291) -- Julien BLACHE Wed, 20 Aug 2003 14:03:14 +0200 sane-backends (1.0.12-6) unstable; urgency=low [ Julien BLACHE ] * debian/control + Bumped Standards-Version to 3.6.0 (no changes). + libsane depends on adduser (>= 3.47). + libsane recommends hotplug. * debian/libsane.templates: templates slightly rewritten to accomodate the various debconf frontends. (Closes: #202744) * debconf-related items: + Switched debconf templates to debconf-po, thus build-depends on debhelper (>= 4.1.16). (Closes: #203669) + Added french debconf translation based on translation from Michel Grentzinger for sane-backends 1.0.12-5. (Closes: #203670) * debian/libsane.postinst: + Add a scanner system group, and chown root.scanner /dev/usb/scanner* if we create them. (Closes: #201851) * debian/libsane.README.Debian: + Added a Setup paragraph, detailing permissions issues and solutions implemented by this package. * debian/sane-utils.README.Debian: + Added, deals with permissions issues wrt the saned daemon. * hotplug support: + debian/hotplug/libusbscanner: added, hotplug script for scanners used with libusb, courtesy of Max Kutny . Installed as /etc/hotplug/usb/libusbscanner. + debian/hotplug/libsane.usermap: example map file for use with hotplug. Installed as /etc/hotplug/usb/libsane.usermap. [ Aurélien JARNO ] * debian/devfs/scanner: + Added, installed as /etc/devfs/conf.d/scanner. -- Julien BLACHE Wed, 6 Aug 2003 13:08:11 +0200 sane-backends (1.0.12-5) unstable; urgency=low * 21_gt68xx_uhci_fixes.dpatch : fix timeout with UHCI host controllers. * debian/control: - Added temporary Build-Dependency on gcc-3.3 (>= 3.3.1-0pre0), which should fix the ICE on m68k. * debian/rules: - Should build with -O2 on m68k again. -- Julien BLACHE Wed, 2 Jul 2003 12:04:59 +0200 sane-backends (1.0.12-4) unstable; urgency=low [ Julien BLACHE ] * The "I fucking hate libtool" release. Prevent libtool from checking things we do not need at all, such as a C++ or an F77 compiler. Sigh. * Converted to dpatch. Build-depends on dpatch. * Re-enable the gphoto2 backend, -but- do so that frontends do not get linked against libgphoto2. Only the backend is linked against it. (Closes: #195613) * Thus, adds back the libgphoto2-2-dev build-dependency. * Effectively move the html doc to the html subdir, instead of copying them with dh_install. [ Aurélien JARNO ] * Add autotools-stamp, so that configure won't be run twice. * Do not link sanei_config2 in hp5400 : not needed (fixes an undefined symbol, too). -- Julien BLACHE Tue, 3 Jun 2003 22:34:48 +0200 sane-backends (1.0.12-3) unstable; urgency=low * Fix the net backend so that it _does_ try all alternatives before giving up connecting to the server. (Closes: #195396) -- Julien BLACHE Fri, 30 May 2003 19:22:54 +0200 sane-backends (1.0.12-2) unstable; urgency=low * Build with -O1 on m68k; -O2 triggers an ICE. -- Julien BLACHE Thu, 29 May 2003 11:36:41 +0200 sane-backends (1.0.12-1) unstable; urgency=low * New upstream release. + Should now work on m68k. Yeah. (Closes: #77356) + sane(7) has been improved. (Closes: #188647) + scanimage(1) has been fixed, wrt --batch. + The hp5400 backend has been included, replaces libsane-extras (<< 1.0.12.1). + IPv6 support. * Standards-Version bumped to 3.5.10 (no changes). * libsane-dev belongs to libdevel. * Do not generate manpages and documentation we do not need. -- Julien BLACHE Sun, 25 May 2003 21:14:37 +0200 sane-backends (1.0.11-4) unstable; urgency=medium * Move saned.conf to the sane-utils package. Woops. (Closes: #192742) -- Julien BLACHE Sat, 10 May 2003 08:41:23 +0200 sane-backends (1.0.11-3) unstable; urgency=medium * The "We want to enter testing" release. * Do not build the gphoto2 backend. Gphoto2 is blocked by a bunch of other packages (KDE, ...) and we're free of RC bugs. Enough. * Moved libphoto2-2-dev to Build-Conflicts. * Bumped shlibs. -- Julien BLACHE Sat, 3 May 2003 21:09:58 +0200 sane-backends (1.0.11-2) unstable; urgency=low * Do not tell how to configure libusb. (Closes: #180570) * Do not print "Adding saned..." in sane-utils postinst when the user already exists. * Pulled fixed gphoto2 backend from CVS. (Closes: #180514) -- Julien BLACHE Thu, 13 Feb 2003 13:22:21 +0100 sane-backends (1.0.11-1) unstable; urgency=low * New upstream release. + security fixes to saned. (Closes: #180203) * Added some debconf dialogs: + /dev/parport* + /dev/sg* + note about /proc/bus/usb -- Julien BLACHE Sun, 9 Feb 2003 21:17:16 +0100 sane-backends (1.0.10-2) unstable; urgency=low * Fix postrm breakage. (Closes: #179586) -- Julien BLACHE Mon, 3 Feb 2003 12:39:14 +0100 sane-backends (1.0.10-1) unstable; urgency=low * New upstream release. + fixed sane-scsi manpage. (Closes: #174136) + mustek_pp now has CIS support. (Closes: #152321) * Added http://www.mostang.com/sane/sane-mfgs.html as /usr/share/doc/libsane/supported.html. (Closes: #174131) * New backends, previously included in libsane-extras : + gt68xx + artec_eplus48u (known as tevion9693usb) * datadir is ${prefix}/share, not ${prefix}/share/sane. * Remove /usr/lib/sane/libsane.so.1, as it's not libsane.so.1 (looks like a libtool side-effect). * Remove a couple more unwanted READMEs. * Bumped Standards-Version to 3.5.8. * Added a debconf dialog to create /dev/usb/*. (Closes: #177979) * Added missing dependency on adduser to sane-utils. -- Julien BLACHE Sun, 2 Feb 2003 11:22:24 +0100 sane-backends (1.0.9-4) unstable; urgency=low * Pulled dll.c from CVS, fixes in-line comments. (Closes: #171521) * Applied patch for Plustek backend rounding bug. (Closes: #172012) -- Julien BLACHE Mon, 9 Dec 2002 11:51:26 +0100 sane-backends (1.0.9-3) unstable; urgency=low * Rebuilt against new libgphoto2 package. * Changed Uploaders: filed so that Aurélien's uploads won't be tagged as NMU again. * Do not generate debian/libsane.conffiles at build time, this is handled by dh_installdeb automatically ; otherwise we end up with each conffile being listed twice... -- Julien BLACHE Sun, 1 Dec 2002 11:29:43 +0100 sane-backends (1.0.9-2) unstable; urgency=low * Co-maintainer upload. * Remove /etc/sane.d directory on purge. (Closes: #167603) -- Aurelien Jarno Mon, 4 Nov 2002 14:10:54 +0100 sane-backends (1.0.9-1) unstable; urgency=low * New upstream release. + Video for Linux (v4l) backend cleanup. (Closes: #159634) + Updated Avision backend. (Closes: #146054) + Updated Epson backend. (Closes: #114017) + Fixed char signedness in backend/plustek-usbshading.c. (Closes: #164464) * Fixed debian/copyright. (Closes: #146057) * Enabled translations. * Do not install the upstream changelog twice. * sane-utils does not create /home/saned. * Fixed packages descriptions. (Closes: #165138) -- Julien BLACHE Thu, 24 Oct 2002 18:52:29 +0200 sane-backends (1.0.8-4) unstable; urgency=low * libsane-extras has its own source package now. -- Julien BLACHE Sun, 13 Oct 2002 10:49:54 +0200 sane-backends (1.0.8-3) unstable; urgency=low * New maintainers. * New upstream release. (Closes: #162532, #149317) + saned manpage mentions /usr/sbin/saned. (Closes: #141464) + Symlinks for manpages are properly created. (Closes: #99551) + Fixed hostnames handling in saned.conf. (Closes: #51171) + HP backend update. (Closes: #116962) + Backend loader respects LD_LIBRARY_PATH. (Closes: #143771) + Path for Epson USB scanner corrected in conf file. (Closes: #154296, #154305) + A test backend is included, safer than the pnm backend. (Closes: #139256) + Umax backend fixed. (Closes: #158676) + HP backend fixed, no longer segfaults. (Closes: 154827) * Repackaged from scratch, using debhelper. * Standards-Version bumped to 3.5.6. * Do not include rpath informations in sane-config. (Closes: #143603) * Fixed build problem wrt umask. (Closes: #95440) * Updated libsane-dev Depends. (Closes: #142679) * Fixed typos in umax_pp.conf. (Closes: #158742) * Fixed hp.conf for some scanners. (Closes: #154828) * Fixed README.Debian. (Closes: #146039) * Fixed sane-plustek(5) manpage. (Closes: #159435) * New package sane-utils, contains sane-find-scanner, scanimage and saned. + sane-utils creates user and group saned. (Closes: #141465) * New package libsane-extras, containing some extra backends + hp4200 (v0.2p1) + gt68xx (v1.0-23) + niash (v20020217) (Closes: #160327) + tevion9693 (v0.0.9) * Disabled translations until 1.0.9. -- Julien BLACHE Sat, 12 Oct 2002 10:28:09 +0200 sane-backends (1.0.8-2) unstable; urgency=low * Added build-depends on gettext. (Closes: #163681) -- Kevin Dalley Mon, 7 Oct 2002 09:32:21 -0700 sane-backends (1.0.8-1) unstable; urgency=low * New upstream release. + Many new backends + Many more updated backends -- Kevin Dalley Sun, 6 Oct 2002 18:09:28 -0700 sane-backends (1.0.7-3.2) unstable; urgency=high * Non-Maintainer Upload. * Fix build on SPARC. * Fix build on HPPA, although it's not RC. (Closes: #138108) -- Julien BLACHE Sun, 7 Apr 2002 11:39:41 +0200 sane-backends (1.0.7-3.1) unstable; urgency=medium * Non-Maintainer upload. * Fixes compilation on Alpha, using the frontend/scanimage.c file from the current CVS. (Closes: #138108) * Apply patch submitted for #139509, regarding config.{sub,guess} issues on MIPS. (Closes: #139509) * Fix lintian complaint wrt misplaced Conflicts: field in control file. * Fix lintian complaint about .comment section in /usr/lib/sane/*.so.*. -- Julien BLACHE Sun, 31 Mar 2002 20:24:48 +0200 sane-backends (1.0.7-3) unstable; urgency=low * Link against libusb-0.1-4. (Closes: #119393) -- Kevin Dalley Fri, 15 Mar 2002 18:31:08 +0000 sane-backends (1.0.7-2) unstable; urgency=low * Don't link against libusb due to inconsistencies with versions of libusb libraries. When libusb installation is cleaned up, then usb support will be added again. Unfortunately, this re-opens #119393, though with a lower severity. (Closes: #138349) -- Kevin Dalley Thu, 14 Mar 2002 22:25:53 +0000 sane-backends (1.0.7-1) unstable; urgency=low * New upstream release. * Add libusb, which includes ScanMaker 3600 drivers. (Closes: #119393) * Install plustek-share.h so that plustek driver can be built. (Closes: #72341) -- Kevin Dalley Thu, 14 Mar 2002 01:02:21 +0000 sane-backends (1.0.6-1) unstable; urgency=low * New upstream release. + New backend: gphoto2. -- Kevin Dalley Sun, 27 Jan 2002 23:30:19 -0800 sane-backends (1.0.5-3) unstable; urgency=low * Rebuilt with new version of libgimp-1.2.2-2. -- Kevin Dalley Tue, 2 Oct 2001 22:31:15 -0700 sane-backends (1.0.5-2) unstable; urgency=low * Removed incorrect build dependency on libc6-dev. (Closes: #108639) -- Kevin Dalley Thu, 16 Aug 2001 08:12:40 -0700 sane-backends (1.0.5-1) unstable; urgency=low * New backends: bh (Bell+Howell Copiscan II series), dc240 (Kodak DC240 Digital Camera), sm3600 (Microtek ScanMaker 3600), umax_pp (Umax paralell port scanners). * Fix security bug in saned.c that allowed access to scanner without password. -- Kevin Dalley Sat, 28 Jul 2001 12:38:46 -0700 sane-backends (1.0.4-2) unstable; urgency=low * Increase timeout in sanei_scsi.c, which removes problem with 2.4 kernels. (Closes: #84407) -- Kevin Dalley Thu, 31 May 2001 04:36:29 -0700 sane-backends (1.0.4-1) unstable; urgency=low * New upstream release. * Add backend as63driver. (Closes: #69625) -- Kevin Dalley Sun, 28 Jan 2001 09:17:24 -0800 sane-gimp1.1 (1.0.3-4) unstable; urgency=low * Link sane-gimp1.1 against libgimp1.1-1.1.29. * Change control files so that packages sane and sane-gimp1.1 are explicitly described as working with gimp and gimp1.1 respectively. The package sane now mentions the packages sane-gimp1.1 and vice versa. -- Kevin Dalley Sun, 5 Nov 2000 13:56:49 -0800 sane (1.0.3-3) unstable; urgency=low * Link sane-gimp1.1 against libgimp1.1-1.1.28, which is new library. (Closes: #75029) * Define GIMP_ENABLE_COMPAT_CRUFT to allow use of newer libgimp. -- Kevin Dalley Sun, 22 Oct 2000 21:52:29 -0700 sane (1.0.3-2) unstable; urgency=low * Fix dependency in libsane-dev. (Closes: #71578) * Remove extraneous file which contains space in its name, which causes patch and dpkg-source to fail. (Closes: #71566, #71564, #71540) -- Kevin Dalley Fri, 22 Sep 2000 23:04:17 -0700 sane (1.0.3-1) unstable; urgency=low * New upstream release. + New backends: - mustek_pp - plustek - st400 - v41 + Many updated backends. + 16 bit support for scanimage. -- Kevin Dalley Sat, 2 Sep 2000 11:32:08 -0700 sane (1.0.2-1) unstable; urgency=low * New upstream release. * Aliased and hidden backend support. * Added Ricoh IS50 support. * updated many backends. * New Linux SCSI Generic driver. * sane-gimp1.1 linked with libsane-1,1.22. (Closes: #66544) -- Kevin Dalley Mon, 3 Jul 2000 23:38:42 -0700 sane (1.0.1-1999-10-21-12) unstable; urgency=low * Add libjpeg62-dev, tetex-bin, tetex-extra to Build-Depends. (Closes: #61834, 61835) -- Kevin Dalley Wed, 5 Apr 2000 10:37:38 -0700 sane-gimp1.1 (1.0.1-1999-10-21-11) unstable; urgency=low * Add Build-Depends to control files for sane and sane-gimp1.1. (Closes: #60923) -- Kevin Dalley Mon, 27 Mar 2000 03:16:55 -0800 sane (1.0.1-1999-10-21-10) unstable; urgency=low * Improve description in control file. (Closes: #57032) * Link sane-gimp1.1 with libgimp1.1.17, which is the most recent libgimp1.1 in frozen unstable. -- Kevin Dalley Mon, 28 Feb 2000 02:37:20 +0000 sane (1.0.1-1999-10-21-9) unstable; urgency=low * Link sane-gimp1.1 with libgimp1.1.15, which is the most recent libgimp1.1 in frozen unstable. -- Kevin Dalley Sat, 22 Jan 2000 01:57:55 -0800 sane (1.0.1-1999-10-21-8) unstable; urgency=low * sane now conflicts with gimp1.1, which increases the chances of getting the correct versions of gimp with each version of sane. Unfortunately, sane-gimp1.1 cannot conflict with gimp, since gimp1.1 provides gimp. (Closes: #55070) -- Kevin Dalley Sun, 16 Jan 2000 11:41:52 -0800 sane (1.0.1-1999-10-21-7) unstable; urgency=low * Link against libgimp1.1.14. (Closes: #53982) * Remove conflict of libsane-gimp1.1 with itself. (Closes: #49709) * Each version of sane and sane-gimp1.1 now depend upon the same release of libsane. (Closes: #50927) * shlibs dependencies are updated to ">= 1.0.1-1999-10-21-7" to reduce chances of problem #50927. -- Kevin Dalley Sun, 9 Jan 2000 13:22:57 -0800 sane (1.0.1-1999-10-21-6) unstable; urgency=low * Add conflict between libsane and older version of sane, sane-gimp1.1 due to moving documentation from sane to libsane. (Closes: #50735) -- Kevin Dalley Sat, 20 Nov 1999 15:15:30 -0400 sane (1.0.1-1999-10-21-5) unstable; urgency=low * Add symbolic link to /usr/lib/libsane-dll.so, again. -- Kevin Dalley Fri, 19 Nov 1999 00:03:40 -0400 sane (1.0.1-1999-10-21-4) unstable; urgency=low * Fix problematic stripping of "libsane.la". (Closes: #50099) * Move much of documentation from the sane package to the libsane and libsane-dev packages. * Move find-scanner to libsane package. -- Kevin Dalley Wed, 17 Nov 1999 23:08:44 -0400 sane (1.0.1-1999-10-21-3) unstable; urgency=low * Add symbolic link for /usr/lib/libsane-dll.so. -- Kevin Dalley Mon, 25 Oct 1999 01:24:30 -0700 sane (1.0.1-1999-10-21-2) unstable; urgency=low * Fix symbolic link for libsane.so.1. -- Kevin Dalley Sun, 24 Oct 1999 14:43:14 -0700 sane (1.0.1-1999-10-21-1) unstable; urgency=low * New CVS snapshot. + Fixes many bugs in various backends. -- Kevin Dalley Fri, 22 Oct 1999 22:06:52 -0700 sane (1.0.1-6) unstable; urgency=low * Relink sane-gimp1.1 with libgimp1.1.10 -- Kevin Dalley Thu, 14 Oct 1999 23:33:18 -0700 sane (1.0.1-5) unstable; urgency=low * Relink sane-gimp1.1 with libgimp1.1.9 * Separate sane-gimp1.1 from sane. -- Kevin Dalley Sun, 10 Oct 1999 03:42:37 -0700 sane (1.0.1-4) unstable; urgency=low * Added sane-gimp1.1 (used with gimp1.1) at the same time as sane for gimp-1.0.x. -- Kevin Dalley Wed, 30 Jun 1999 00:54:57 -0700 sane (1.0.1-3) unstable; urgency=low * Try to fix problems with shared libraries. Install libsane-dll.so in /usr/lib so that programs linked with libsane will run. (Closes: #37756) -- Kevin Dalley Mon, 31 May 1999 22:15:16 -0700 sane (1.0.1-2) unstable; urgency=low * Remove dependencies for libsane. -- Kevin Dalley Fri, 30 Apr 1999 23:08:50 -0700 sane (1.0.1-1) unstable; urgency=low * New upstream release. * New backend for Sharp scanners * Update backends for Kodak DC25, HP, Microtek, Micro, Mustek, Nikon Coolscan, snapscan, UMAX. * Fixes a problem with HP scanners. (Closes: #32516) * Includes backend for dc210. (Closes: #31377) -- Kevin Dalley Tue, 27 Apr 1999 01:24:33 -0700 sane (1.00-2) unstable; urgency=low * Removed examples directory. Moved examples/tools to tools directory. -- Kevin Dalley Mon, 5 Apr 1999 02:04:53 -0700 sane (1.00-1) unstable; urgency=low * New upstream release. * Artec backend is back in dll.conf. * Many more scanner are supported now and more changes. -- Kevin Dalley Sat, 5 Dec 1998 01:00:30 -0800 sane (0.74-2) unstable; urgency=low * Temporarily comment out Artec backend in dll.conf, due to bad interaction with Umax scanner. When using an Artec scanner, uncomment "artec" in dll.conf. * Automatically generates conffiles. (Closes: #26545) Thanks to Roman Hodek . * Fix a problem with creation of /usr/share/sane during the build process. (Closes: #26314) -- Kevin Dalley Sun, 20 Sep 1998 18:00:28 -0700 sane (0.74-1) unstable; urgency=low * New upstream release. -- Kevin Dalley Sat, 22 Aug 1998 23:06:26 -0700 sane (0.72-1) unstable; urgency=low * New upstream release. * First official release to support libgtk1-0.99.9. -- Kevin Dalley Fri, 10 Apr 1998 02:29:52 -0700 sane (0.71-2) unstable; urgency=low * Fixed spelling in control files. (Closes: # 19003) * Modified to match latest change in libgtk-0.99.5 * Change datadir to /usr/share/sane * Compatible with libgtk1-0.99.8. (Closes: #19595) -- Kevin Dalley Sun, 22 Mar 1998 19:44:10 -0800 sane (0.71-1) unstable; urgency=low * New upstream release. + New backends: - Polaroid Digital Microscope Cameras (DMC) - Apple scanners - Nikon CoolScan * Remove execute permission in doc directory. (Closes: #17949) * Modify manual page referring to symbolic link of xscanimage. (Closes: #18071) -- Kevin Dalley Fri, 27 Feb 1998 23:03:08 -0800 sane (0.70-1) unstable; urgency=low * New upstream release: + New and updated backends: - AGFA SnapScan - UMAX scanners * Add patches 2-5 to SnapScan backend which allows other scanners to work as well with the backend -- Kevin Dalley Sat, 31 Jan 1998 17:32:53 -0800 sane (0.69-2) unstable; urgency=low * Modify umax-scanner.h so that Astra 1200S is legal. -- Kevin Dalley Sun, 25 Jan 1998 09:44:45 -0800 sane (0.69-1) unstable; urgency=low * New upstream release. -- Kevin Dalley Fri, 23 Jan 1998 20:24:01 -0800 sane (0.68-4) unstable; urgency=low * Modify gtkglue.c to correspond with changes to libgtk1. -- Kevin Dalley Tue, 6 Jan 1998 22:24:14 -0800 sane (0.68-3) unstable; urgency=low * Change plug-in directory to 0.99 to match gimp changes, add explicit gimp dependency. * Add README.debian. * Install find-scanner. * Install many documentation files. -- Kevin Dalley Fri, 2 Jan 1998 21:51:52 -0800 sane (0.68-2) unstable; urgency=low * Fix control file. -- Kevin Dalley Sun, 21 Dec 1997 18:26:23 -0800 sane (0.68-1) unstable; urgency=low * New upstream release. -- Kevin Dalley Fri, 5 Dec 1997 00:42:27 -0800 sane (0.67-1) unstable; urgency=low * Initial release. -- Kevin Dalley Tue, 18 Nov 1997 21:38:41 -0800