;
; SANE Backend specification file
;

:backend "artec_eplus48u"
:version "unmaintained"
:manpage "sane-artec_eplus48u"
;:url "http://www.angelfire.com/linux/crapsite/"
:devicetype :scanner

:mfg "Artec/Ultima"
:url "http://www.artecusa.com/"

:model "E+ 48U"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4003"
:comment "CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners."

:model "E+ Pro"
:status :minimal
:interface "USB"
:usbid "0x05d8" "0x4004"
:comment "Works up to 600dpi, but not 1200. Needs better calibration. See bug #310490"


:mfg "Medion/Lifetec/Tevion/Cytron"
:url "http://www.medion.com"
:comment "Sold by Aldi and Tchibo."

:model "MD9693"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4003"

:model "MD9705"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4003"

:model "MD4394"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4003"
:comment "Only scanners with product id 0x4003 will work; try the gt68xx backend, if your scanner has product id 0x4002 "


:mfg "Trust"
:url "http://www.trust-site.com"

:model "Easy Webscan 19200"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4006"

:model "240H Easy Webscan Gold"
:status :basic
:interface "USB"
:usbid "0x05d8" "0x4007"
:comment "Works up to 600 dpi"


:mfg "Memorex"
:url "http://www.artecusa.com/"

:model "MEM 48U"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4005"


:mfg "Microstar"
:url "http://www.microstar.de/"

:model "MR 9791"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4003"


:mfg "UMAX"
:url "http://www.umax.com/"
:url "http://www.umax.com.tw/"
:url "http://www.umax.de/en"
:url "http://www.umax-europe.com"
:url "http://www.umaxjapan.co.jp"
:url "http://www.umax.com.cn"

:model "AstraSlim SE"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4009"

:model "AstraSlim 1200 SE"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4010"


:mfg "Yakumo"
:url "http://www.yakumo.com/"

:model "Scan50"
:status :good
:interface "USB"
:usbid "0x05d8" "0x4011"