/* sane - Scanner Access Now Easy. Copyright (C) 2001 - 2005 Henning Meier-Geinitz Copyright (C) 2001 Frank Zago (sanei_usb_control_msg) Copyright (C) 2003 Rene Rebe (sanei_read_int,sanei_set_timeout) Copyright (C) 2005 Paul Smedley (OS/2 usbcalls) Copyright (C) 2008 m. allan noah (bus rescan support, sanei_usb_clear_halt) Copyright (C) 2009 Julien BLACHE (libusb-1.0) Copyright (C) 2011 Reinhold Kainhofer (sanei_usb_set_endpoint) This file is part of the SANE package. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . As a special exception, the authors of SANE give permission for additional uses of the libraries contained in this release of SANE. The exception is that, if you link a SANE library with other files to produce an executable, this does not by itself cause the resulting executable to be covered by the GNU General Public License. Your use of that executable is in no way restricted on account of linking the SANE library code into it. This exception does not, however, invalidate any other reasons why the executable file might be covered by the GNU General Public License. If you submit changes to SANE to the maintainers to be included in a subsequent release, you agree by submitting the changes that those changes may be distributed with this exception intact. If you write modifications of your own for SANE, it is your choice whether to permit this exception to apply to your modifications. If you do not wish that, delete this exception notice. This file provides a generic USB interface. */ #include "../include/sane/config.h" #ifdef HAVE_STDINT_H # include #endif #include #include #include #include #include #include #include #include #ifdef HAVE_SYS_IOCTL_H #include #endif #include #include #include #if WITH_USB_RECORD_REPLAY #include #endif #ifdef HAVE_RESMGR #include #endif #ifdef HAVE_LIBUSB_LEGACY #ifdef HAVE_LUSB0_USB_H #include #else #include #endif #endif /* HAVE_LIBUSB_LEGACY */ #ifdef HAVE_LIBUSB #include #endif /* HAVE_LIBUSB */ #ifdef HAVE_USBCALLS #include #include #include #define MAX_RW 64000 static int usbcalls_timeout = 30 * 1000; /* 30 seconds */ USBHANDLE dh; PHEV pUsbIrqStartHev=NULL; static struct usb_descriptor_header * GetNextDescriptor( struct usb_descriptor_header *currHead, UCHAR *lastBytePtr) { UCHAR *currBytePtr, *nextBytePtr; if (!currHead->bLength) return (NULL); currBytePtr=(UCHAR *)currHead; nextBytePtr=currBytePtr+currHead->bLength; if (nextBytePtr>=lastBytePtr) return (NULL); return ((struct usb_descriptor_header*)nextBytePtr); } #endif /* HAVE_USBCALLS */ #if (defined (__FreeBSD__) && (__FreeBSD_version < 800064)) #include #include #endif /* __FreeBSD__ */ #if defined (__DragonFly__) #include #endif #define BACKEND_NAME sanei_usb #include "../include/sane/sane.h" #include "../include/sane/sanei_debug.h" #include "../include/sane/sanei_usb.h" #include "../include/sane/sanei_config.h" typedef enum { sanei_usb_method_scanner_driver = 0, /* kernel scanner driver (Linux, BSD) */ sanei_usb_method_libusb, sanei_usb_method_usbcalls } sanei_usb_access_method_type; typedef struct { SANE_Bool open; sanei_usb_access_method_type method; int fd; SANE_String devname; SANE_Int vendor; SANE_Int product; SANE_Int bulk_in_ep; SANE_Int bulk_out_ep; SANE_Int iso_in_ep; SANE_Int iso_out_ep; SANE_Int int_in_ep; SANE_Int int_out_ep; SANE_Int control_in_ep; SANE_Int control_out_ep; SANE_Int interface_nr; SANE_Int alt_setting; SANE_Int missing; #ifdef HAVE_LIBUSB_LEGACY usb_dev_handle *libusb_handle; struct usb_device *libusb_device; #endif /* HAVE_LIBUSB_LEGACY */ #ifdef HAVE_LIBUSB libusb_device *lu_device; libusb_device_handle *lu_handle; #endif /* HAVE_LIBUSB */ } device_list_type; /** * total number of devices that can be found at the same time */ #define MAX_DEVICES 100 /** * per-device information, using the functions' parameters dn as index */ static device_list_type devices[MAX_DEVICES]; /** * total number of detected devices in devices array */ static int device_number=0; /** * count number of time sanei_usb has been initialized */ static int initialized=0; typedef enum { sanei_usb_testing_mode_disabled = 0, sanei_usb_testing_mode_record, // records the communication with the slave // but does not change the USB stack in any // way sanei_usb_testing_mode_replay, // replays the communication with the scanner // recorded earlier } sanei_usb_testing_mode; // Whether testing mode has been enabled static sanei_usb_testing_mode testing_mode = sanei_usb_testing_mode_disabled; #if WITH_USB_RECORD_REPLAY static int testing_development_mode = 0; static int testing_already_opened = 0; static int testing_known_commands_input_failed = 0; static unsigned testing_last_known_seq = 0; static SANE_String testing_record_backend = NULL; static xmlNode* testing_append_commands_node = NULL; // XML file from which we read testing data static SANE_String testing_xml_path = NULL; static xmlDoc* testing_xml_doc = NULL; static xmlNode* testing_xml_next_tx_node = NULL; #endif // WITH_USB_RECORD_REPLAY #if defined(HAVE_LIBUSB_LEGACY) || defined(HAVE_LIBUSB) static int libusb_timeout = 30 * 1000; /* 30 seconds */ #endif /* HAVE_LIBUSB_LEGACY */ #ifdef HAVE_LIBUSB static libusb_context *sanei_usb_ctx; #endif /* HAVE_LIBUSB */ #if defined (__APPLE__) /* macOS won't configure several USB scanners (i.e. ScanSnap 300M) because their * descriptors are vendor specific. As a result the device will get configured * later during sanei_usb_open making it safe to ignore the configuration check * on these platforms. */ #define SANEI_ALLOW_UNCONFIGURED_DEVICES #endif #if defined (__linux__) /* From /usr/src/linux/driver/usb/scanner.h */ #define SCANNER_IOCTL_VENDOR _IOR('U', 0x20, int) #define SCANNER_IOCTL_PRODUCT _IOR('U', 0x21, int) #define SCANNER_IOCTL_CTRLMSG _IOWR('U', 0x22, devrequest) /* Older (unofficial) IOCTL numbers for Linux < v2.4.13 */ #define SCANNER_IOCTL_VENDOR_OLD _IOR('u', 0xa0, int) #define SCANNER_IOCTL_PRODUCT_OLD _IOR('u', 0xa1, int) /* From /usr/src/linux/include/linux/usb.h */ typedef struct { unsigned char requesttype; unsigned char request; unsigned short value; unsigned short index; unsigned short length; } devrequest; /* From /usr/src/linux/driver/usb/scanner.h */ struct ctrlmsg_ioctl { devrequest req; void *data; } cmsg; #elif defined(__BEOS__) #include #include #endif /* __linux__ */ /* Debug level from sanei_init_debug */ static SANE_Int debug_level; static void print_buffer (const SANE_Byte * buffer, SANE_Int size) { #define NUM_COLUMNS 16 #define PRINT_BUFFER_SIZE (4 + NUM_COLUMNS * (3 + 1) + 1 + 1) char line_str[PRINT_BUFFER_SIZE]; char *pp; int column; int line; memset (line_str, 0, PRINT_BUFFER_SIZE); for (line = 0; line < ((size + NUM_COLUMNS - 1) / NUM_COLUMNS); line++) { pp = line_str; sprintf (pp, "%03X ", line * NUM_COLUMNS); pp += 4; for (column = 0; column < NUM_COLUMNS; column++) { if ((line * NUM_COLUMNS + column) < size) sprintf (pp, "%02X ", buffer[line * NUM_COLUMNS + column]); else sprintf (pp, " "); pp += 3; } for (column = 0; column < NUM_COLUMNS; column++) { if ((line * NUM_COLUMNS + column) < size) sprintf (pp, "%c", (buffer[line * NUM_COLUMNS + column] < 127) && (buffer[line * NUM_COLUMNS + column] > 31) ? buffer[line * NUM_COLUMNS + column] : '.'); else sprintf (pp, " "); pp += 1; } DBG (11, "%s\n", line_str); } } #if !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) static void kernel_get_vendor_product (int fd, const char *name, int *vendorID, int *productID) { #if defined (__linux__) /* read the vendor and product IDs via the IOCTLs */ if (ioctl (fd, SCANNER_IOCTL_VENDOR, vendorID) == -1) { if (ioctl (fd, SCANNER_IOCTL_VENDOR_OLD, vendorID) == -1) DBG (3, "kernel_get_vendor_product: ioctl (vendor) " "of device %s failed: %s\n", name, strerror (errno)); } if (ioctl (fd, SCANNER_IOCTL_PRODUCT, productID) == -1) { if (ioctl (fd, SCANNER_IOCTL_PRODUCT_OLD, productID) == -1) DBG (3, "sanei_usb_get_vendor_product: ioctl (product) " "of device %s failed: %s\n", name, strerror (errno)); } #elif defined(__BEOS__) { uint16 vendor, product; if (ioctl (fd, B_SCANNER_IOCTL_VENDOR, &vendor) != B_OK) DBG (3, "kernel_get_vendor_product: ioctl (vendor) " "of device %d failed: %s\n", fd, strerror (errno)); if (ioctl (fd, B_SCANNER_IOCTL_PRODUCT, &product) != B_OK) DBG (3, "sanei_usb_get_vendor_product: ioctl (product) " "of device %d failed: %s\n", fd, strerror (errno)); /* copy from 16 to 32 bit value */ *vendorID = vendor; *productID = product; } #elif (defined (__FreeBSD__) && __FreeBSD_version < 800064) || defined (__DragonFly__) { int controller; int ctrl_fd; char buf[40]; int dev; for (controller = 0; ; controller++ ) { snprintf (buf, sizeof (buf) - 1, "/dev/usb%d", controller); ctrl_fd = open (buf, O_RDWR); /* If we can not open the usb controller device, treat it as the end of controller devices */ if (ctrl_fd < 0) break; /* Search for the scanner device on this bus */ for (dev = 1; dev < USB_MAX_DEVICES; dev++) { struct usb_device_info devInfo; devInfo.udi_addr = dev; if (ioctl (ctrl_fd, USB_DEVICEINFO, &devInfo) == -1) break; /* Treat this as the end of devices for this controller */ snprintf (buf, sizeof (buf), "/dev/%s", devInfo.udi_devnames[0]); if (strncmp (buf, name, sizeof (buf)) == 0) { *vendorID = (int) devInfo.udi_vendorNo; *productID = (int) devInfo.udi_productNo; close (ctrl_fd); return; } } close (ctrl_fd); } DBG (3, "kernel_get_vendor_product: Could not retrieve " "vendor/product ID from device %s\n", name); } #endif /* defined (__linux__), defined(__BEOS__), ... */ /* put more os-dependant stuff ... */ } #endif /* !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) */ /** * store the given device in device list if it isn't already * in it * @param device device to store if new */ static void store_device (device_list_type device) { int i = 0; int pos = -1; /* if there are already some devices present, check against * them and leave if an equal one is found */ for (i = 0; i < device_number; i++) { if (devices[i].method == device.method && !strcmp (devices[i].devname, device.devname) && devices[i].vendor == device.vendor && devices[i].product == device.product) { /* * Need to update the LibUSB device pointer, since it might * have changed after the latest USB scan. */ #ifdef HAVE_LIBUSB_LEGACY devices[i].libusb_device = device.libusb_device; #endif #ifdef HAVE_LIBUSB devices[i].lu_device = device.lu_device; #endif devices[i].missing=0; DBG (3, "store_device: not storing device %s\n", device.devname); /* since devname has been created by strdup() * we have to free it to avoid leaking memory */ free(device.devname); return; } if (devices[i].missing >= 2) pos = i; } /* reuse slot of a device now missing */ if(pos > -1){ DBG (3, "store_device: overwrite dn %d with %s\n", pos, device.devname); /* we reuse the slot used by a now missing device * so we free the allocated memory for the missing one */ if (devices[pos].devname) { free(devices[pos].devname); devices[pos].devname = NULL; } } else{ if(device_number >= MAX_DEVICES){ DBG (3, "store_device: no room for %s\n", device.devname); return; } pos = device_number; device_number++; DBG (3, "store_device: add dn %d with %s\n", pos, device.devname); } memcpy (&(devices[pos]), &device, sizeof (device)); devices[pos].open = SANE_FALSE; } #ifdef HAVE_LIBUSB static char * sanei_libusb_strerror (int errcode) { /* Error codes & descriptions from the libusb-1.0 documentation */ switch (errcode) { case LIBUSB_SUCCESS: return "Success (no error)"; case LIBUSB_ERROR_IO: return "Input/output error"; case LIBUSB_ERROR_INVALID_PARAM: return "Invalid parameter"; case LIBUSB_ERROR_ACCESS: return "Access denied (insufficient permissions)"; case LIBUSB_ERROR_NO_DEVICE: return "No such device (it may have been disconnected)"; case LIBUSB_ERROR_NOT_FOUND: return "Entity not found"; case LIBUSB_ERROR_BUSY: return "Resource busy"; case LIBUSB_ERROR_TIMEOUT: return "Operation timed out"; case LIBUSB_ERROR_OVERFLOW: return "Overflow"; case LIBUSB_ERROR_PIPE: return "Pipe error"; case LIBUSB_ERROR_INTERRUPTED: return "System call interrupted (perhaps due to signal)"; case LIBUSB_ERROR_NO_MEM: return "Insufficient memory"; case LIBUSB_ERROR_NOT_SUPPORTED: return "Operation not supported or unimplemented on this platform"; case LIBUSB_ERROR_OTHER: return "Other error"; default: return "Unknown libusb-1.0 error code"; } } #endif /* HAVE_LIBUSB */ #if WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_testing_enable_replay(SANE_String_Const path, int development_mode) { testing_mode = sanei_usb_testing_mode_replay; testing_development_mode = development_mode; // TODO: we'll leak if no one ever inits sane_usb properly testing_xml_path = strdup(path); testing_xml_doc = xmlReadFile(testing_xml_path, NULL, 0); if (!testing_xml_doc) return SANE_STATUS_ACCESS_DENIED; return SANE_STATUS_GOOD; } #define FAIL_TEST(func, ...) \ do { \ DBG(1, "%s: FAIL: ", func); \ DBG(1, __VA_ARGS__); \ fail_test(); \ } while (0) #define FAIL_TEST_TX(func, node, ...) \ do { \ sanei_xml_print_seq_if_any(node, func); \ DBG(1, "%s: FAIL: ", func); \ DBG(1, __VA_ARGS__); \ fail_test(); \ } while (0) void fail_test() { } SANE_Status sanei_usb_testing_enable_record(SANE_String_Const path, SANE_String_Const be_name) { testing_mode = sanei_usb_testing_mode_record; testing_record_backend = strdup(be_name); testing_xml_path = strdup(path); return SANE_STATUS_GOOD; } static xmlNode* sanei_xml_find_first_child_with_name(xmlNode* parent, const char* name) { xmlNode* curr_child = xmlFirstElementChild(parent); while (curr_child != NULL) { if (xmlStrcmp(curr_child->name, (const xmlChar*)name) == 0) return curr_child; curr_child = xmlNextElementSibling(curr_child); } return NULL; } static xmlNode* sanei_xml_find_next_child_with_name(xmlNode* child, const char* name) { xmlNode* curr_child = xmlNextElementSibling(child); while (curr_child != NULL) { if (xmlStrcmp(curr_child->name, (const xmlChar*)name) == 0) return curr_child; curr_child = xmlNextElementSibling(curr_child); } return NULL; } // a wrapper to get rid of -Wpointer-sign warnings in a single place static char* sanei_xml_get_prop(xmlNode* node, const char* name) { return (char*)xmlGetProp(node, (const xmlChar*)name); } // returns -1 if attribute is not found static int sanei_xml_get_prop_uint(xmlNode* node, const char* name) { char* attr = sanei_xml_get_prop(node, name); if (attr == NULL) { return -1; } unsigned attr_uint = strtoul(attr, NULL, 0); xmlFree(attr); return attr_uint; } static void sanei_xml_print_seq_if_any(xmlNode* node, const char* parent_fun) { char* attr = sanei_xml_get_prop(node, "seq"); if (attr == NULL) return; DBG(1, "%s: FAIL: in transaction with seq %s:\n", parent_fun, attr); xmlFree(attr); } // Checks whether transaction should be ignored. We ignore set_configuration // transactions, because set_configuration is called in sanei_usb_open outside test path. static int sanei_xml_is_transaction_ignored(xmlNode* node) { if (xmlStrcmp(node->name, (const xmlChar*)"control_tx") != 0) return 0; if (sanei_xml_get_prop_uint(node, "endpoint_number") != 0) return 0; int is_direction_in = 0; int is_direction_out = 0; char* attr = sanei_xml_get_prop(node, "direction"); if (attr == NULL) return 0; if (strcmp(attr, "IN") == 0) is_direction_in = 1; if (strcmp(attr, "OUT") == 0) is_direction_out = 1; xmlFree(attr); unsigned bRequest = sanei_xml_get_prop_uint(node, "bRequest"); if (bRequest == USB_REQ_GET_DESCRIPTOR && is_direction_in) { if (sanei_xml_get_prop_uint(node, "bmRequestType") != 0x80) return 0; return 1; } if (bRequest == USB_REQ_SET_CONFIGURATION && is_direction_out) return 1; return 0; } static xmlNode* sanei_xml_skip_non_tx_nodes(xmlNode* node) { const char* known_node_names[] = { "control_tx", "bulk_tx", "interrupt_tx", "get_descriptor", "debug", "known_commands_end" }; while (node != NULL) { int found = 0; for (unsigned i = 0; i < sizeof(known_node_names) / sizeof(known_node_names[0]); ++i) { if (xmlStrcmp(node->name, (const xmlChar*) known_node_names[i]) == 0) { found = 1; break; } } if (found && sanei_xml_is_transaction_ignored(node) == 0) { break; } node = xmlNextElementSibling(node); } return node; } static int sanei_xml_is_known_commands_end(xmlNode* node) { if (!testing_development_mode || node == NULL) return 0; return xmlStrcmp(node->name, (const xmlChar*)"known_commands_end") == 0; } static xmlNode* sanei_xml_peek_next_tx_node() { return testing_xml_next_tx_node; } static xmlNode* sanei_xml_get_next_tx_node() { xmlNode* next = testing_xml_next_tx_node; if (sanei_xml_is_known_commands_end(next)) { testing_append_commands_node = xmlPreviousElementSibling(next); return next; } testing_xml_next_tx_node = xmlNextElementSibling(testing_xml_next_tx_node); testing_xml_next_tx_node = sanei_xml_skip_non_tx_nodes(testing_xml_next_tx_node); return next; } #define CHAR_TYPE_INVALID -1 #define CHAR_TYPE_SPACE -2 static int8_t sanei_xml_char_types[256] = { /* 0x00-0x0f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -2, -2, -2, -2, -2, -1, -1, /* 0x10-0x1f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x20-0x2f */ -2, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x30-0x3f */ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, -1, -1, -1, -1, -1, -1, /* 0x40-0x4f */ -1, 10, 11, 12, 13, 14, 15, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x50-0x5f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x60-0x6f */ -1, 10, 11, 12, 13, 14, 15, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x70-0x7f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x80-0x8f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0x90-0x9f */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xa0-0xaf */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xb0-0xbf */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xc0-0xcf */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xd0-0xdf */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xe0-0xef */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0xf0-0xff */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, }; static char* sanei_xml_get_hex_data_slow_path(xmlNode* node, xmlChar* content, xmlChar* cur_content, char* ret_data, char* cur_ret_data, size_t* size) { int num_nibbles = 0; unsigned cur_nibble = 0; while (*cur_content != 0) { while (sanei_xml_char_types[(uint8_t)*cur_content] == CHAR_TYPE_SPACE) cur_content++; if (*cur_content == 0) break; // don't use stroul because it will parse in big-endian and data is in // little endian uint8_t c = *cur_content; int8_t ci = sanei_xml_char_types[c]; if (ci == CHAR_TYPE_INVALID) { FAIL_TEST_TX(__func__, node, "unexpected character %c\n", c); cur_content++; continue; } cur_nibble = (cur_nibble << 4) | ci; num_nibbles++; if (num_nibbles == 2) { *cur_ret_data++ = cur_nibble; cur_nibble = 0; num_nibbles = 0; } cur_content++; } *size = cur_ret_data - ret_data; xmlFree(content); return ret_data; } // Parses hex data in XML text node in the format of '00 11 ab 3f', etc. to // binary string. The size is returned as *size. The caller is responsible for // freeing the returned value static char* sanei_xml_get_hex_data(xmlNode* node, size_t* size) { xmlChar* content = xmlNodeGetContent(node); // let's overallocate to simplify the implementation. We expect the string // to be deallocated soon anyway char* ret_data = malloc(strlen((const char*)content) / 2 + 2); char* cur_ret_data = ret_data; xmlChar* cur_content = content; // the text to binary conversion takes most of the time spent in tests, so we // take extra care to optimize it. We split the implementation into fast and // slow path. The fast path utilizes the knowledge that there will be no spaces // within bytes. When this assumption does not hold, we switch to the slow path. while (*cur_content != 0) { // most of the time there will be 1 or 2 spaces between bytes. Give the CPU // chance to predict this by partially unrolling the while loop. if (sanei_xml_char_types[(uint8_t)*cur_content] == CHAR_TYPE_SPACE) { cur_content++; if (sanei_xml_char_types[(uint8_t)*cur_content] == CHAR_TYPE_SPACE) { cur_content++; while (sanei_xml_char_types[(uint8_t)*cur_content] == CHAR_TYPE_SPACE) cur_content++; } } if (*cur_content == 0) break; // don't use stroul because it will parse in big-endian and data is in // little endian int8_t ci1 = sanei_xml_char_types[(uint8_t)*cur_content]; int8_t ci2 = sanei_xml_char_types[(uint8_t)*(cur_content + 1)]; if (ci1 < 0 || ci2 < 0) return sanei_xml_get_hex_data_slow_path(node, content, cur_content, ret_data, cur_ret_data, size); *cur_ret_data++ = ci1 << 4 | ci2; cur_content += 2; } *size = cur_ret_data - ret_data; xmlFree(content); return ret_data; } // caller is responsible for freeing the returned pointer static char* sanei_binary_to_hex_data(const char* data, size_t size, size_t* out_size) { char* hex_data = malloc(size * 4); size_t hex_size = 0; for (size_t i = 0; i < size; ++i) { hex_size += snprintf(hex_data + hex_size, 3, "%02hhx", data[i]); if (i + 1 != size) { if ((i + 1) % 32 == 0) hex_data[hex_size++] = '\n'; else hex_data[hex_size++] = ' '; } } hex_data[hex_size] = 0; if (out_size) *out_size = hex_size; return hex_data; } static void sanei_xml_set_data(xmlNode* node, const char* data) { // FIXME: remove existing children xmlAddChild(node, xmlNewText((const xmlChar*)data)); } // Writes binary data to XML node as a child text node in the hex format of // '00 11 ab 3f'. static void sanei_xml_set_hex_data(xmlNode* node, const char* data, size_t size) { char* hex_data = sanei_binary_to_hex_data(data, size, NULL); sanei_xml_set_data(node, hex_data); free(hex_data); } static void sanei_xml_set_hex_attr(xmlNode* node, const char* attr_name, unsigned attr_value) { const int buf_size = 128; char buf[buf_size]; if (attr_value > 0xffffff) snprintf(buf, buf_size, "0x%x", attr_value); else if (attr_value > 0xffff) snprintf(buf, buf_size, "0x%06x", attr_value); else if (attr_value > 0xff) snprintf(buf, buf_size, "0x%04x", attr_value); else snprintf(buf, buf_size, "0x%02x", attr_value); xmlNewProp(node, (const xmlChar*)attr_name, (const xmlChar*)buf); } static void sanei_xml_set_uint_attr(xmlNode* node, const char* attr_name, unsigned attr_value) { const int buf_size = 128; char buf[buf_size]; snprintf(buf, buf_size, "%d", attr_value); xmlNewProp(node, (const xmlChar*)attr_name, (const xmlChar*)buf); } static xmlNode* sanei_xml_append_command(xmlNode* sibling, int indent, xmlNode* e_command) { if (indent) { xmlNode* e_indent = xmlNewText((const xmlChar*)"\n "); sibling = xmlAddNextSibling(sibling, e_indent); } return xmlAddNextSibling(sibling, e_command); } static void sanei_xml_command_common_props(xmlNode* node, int endpoint_number, const char* direction) { xmlNewProp(node, (const xmlChar*)"time_usec", (const xmlChar*)"0"); sanei_xml_set_uint_attr(node, "seq", ++testing_last_known_seq); sanei_xml_set_uint_attr(node, "endpoint_number", endpoint_number); xmlNewProp(node, (const xmlChar*)"direction", (const xmlChar*)direction); } static void sanei_xml_record_seq(xmlNode* node) { int seq = sanei_xml_get_prop_uint(node, "seq"); if (seq > 0) testing_last_known_seq = seq; } static void sanei_xml_break() { } static void sanei_xml_break_if_needed(xmlNode* node) { char* attr = sanei_xml_get_prop(node, "debug_break"); if (attr != NULL) { sanei_xml_break(); xmlFree(attr); } } // returns 1 on success static int sanei_usb_check_attr(xmlNode* node, const char* attr_name, const char* expected, const char* parent_fun) { char* attr = sanei_xml_get_prop(node, attr_name); if (attr == NULL) { FAIL_TEST_TX(parent_fun, node, "no %s attribute\n", attr_name); return 0; } if (strcmp(attr, expected) != 0) { FAIL_TEST_TX(parent_fun, node, "unexpected %s attribute: %s, wanted %s\n", attr_name, attr, expected); xmlFree(attr); return 0; } xmlFree(attr); return 1; } // returns 1 on success static int sanei_usb_attr_is(xmlNode* node, const char* attr_name, const char* expected) { char* attr = sanei_xml_get_prop(node, attr_name); if (attr == NULL) return 0; if (strcmp(attr, expected) != 0) { xmlFree(attr); return 0; } xmlFree(attr); return 1; } // returns 0 on success static int sanei_usb_check_attr_uint(xmlNode* node, const char* attr_name, unsigned expected, const char* parent_fun) { char* attr = sanei_xml_get_prop(node, attr_name); if (attr == NULL) { FAIL_TEST_TX(parent_fun, node, "no %s attribute\n", attr_name); return 0; } unsigned attr_int = strtoul(attr, NULL, 0); if (attr_int != expected) { FAIL_TEST_TX(parent_fun, node, "unexpected %s attribute: %s, wanted 0x%x\n", attr_name, attr, expected); xmlFree(attr); return 0; } xmlFree(attr); return 1; } static int sanei_usb_attr_is_uint(xmlNode* node, const char* attr_name, unsigned expected) { char* attr = sanei_xml_get_prop(node, attr_name); if (attr == NULL) return 0; unsigned attr_int = strtoul(attr, NULL, 0); if (attr_int != expected) { xmlFree(attr); return 0; } xmlFree(attr); return 1; } // returns 1 on data equality static int sanei_usb_check_data_equal(xmlNode* node, const char* data, size_t data_size, const char* expected_data, size_t expected_size, const char* parent_fun) { if ((data_size == expected_size) && (memcmp(data, expected_data, data_size) == 0)) return 1; char* data_hex = sanei_binary_to_hex_data(data, data_size, NULL); char* expected_hex = sanei_binary_to_hex_data(expected_data, expected_size, NULL); if (data_size == expected_size) FAIL_TEST_TX(parent_fun, node, "data differs (size %lu):\n", data_size); else FAIL_TEST_TX(parent_fun, node, "data differs (got size %lu, expected %lu):\n", data_size, expected_size); FAIL_TEST(parent_fun, "got: %s\n", data_hex); FAIL_TEST(parent_fun, "expected: %s\n", expected_hex); free(data_hex); free(expected_hex); return 0; } SANE_String sanei_usb_testing_get_backend() { if (testing_xml_doc == NULL) return NULL; xmlNode* el_root = xmlDocGetRootElement(testing_xml_doc); if (xmlStrcmp(el_root->name, (const xmlChar*)"device_capture") != 0) { FAIL_TEST(__func__, "the given file is not USB capture\n"); return NULL; } char* attr = sanei_xml_get_prop(el_root, "backend"); if (attr == NULL) { FAIL_TEST(__func__, "no backend attr in description node\n"); return NULL; } // duplicate using strdup so that the caller can use free() char* ret = strdup(attr); xmlFree(attr); return ret; } SANE_Bool sanei_usb_is_replay_mode_enabled() { if (testing_mode == sanei_usb_testing_mode_replay) return SANE_TRUE; return SANE_FALSE; } static void sanei_usb_record_debug_msg(xmlNode* node, SANE_String_Const message) { int node_was_null = node == NULL; if (node_was_null) node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"debug"); sanei_xml_set_uint_attr(e_tx, "seq", ++testing_last_known_seq); xmlNewProp(e_tx, (const xmlChar*)"message", (const xmlChar*)message); node = sanei_xml_append_command(node, node_was_null, e_tx); if (node_was_null) testing_append_commands_node = node; } static void sanei_usb_record_replace_debug_msg(xmlNode* node, SANE_String_Const message) { if (!testing_development_mode) return; testing_last_known_seq--; sanei_usb_record_debug_msg(node, message); xmlUnlinkNode(node); xmlFreeNode(node); } static void sanei_usb_replay_debug_msg(SANE_String_Const message) { if (testing_known_commands_input_failed) return; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return; } if (sanei_xml_is_known_commands_end(node)) { sanei_usb_record_debug_msg(NULL, message); return; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"debug") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); sanei_usb_record_replace_debug_msg(node, message); } if (!sanei_usb_check_attr(node, "message", message, __func__)) { sanei_usb_record_replace_debug_msg(node, message); } } extern void sanei_usb_testing_record_clear() { if (testing_mode != sanei_usb_testing_mode_record) return; // we only need to indicate that we never opened a device and sanei_usb_record_open() will // reinitialize everything for us. testing_already_opened = 0; testing_known_commands_input_failed = 0; testing_last_known_seq = 0; testing_append_commands_node = NULL; } extern void sanei_usb_testing_record_message(SANE_String_Const message) { if (testing_mode == sanei_usb_testing_mode_record) { sanei_usb_record_debug_msg(NULL, message); } if (testing_mode == sanei_usb_testing_mode_replay) { sanei_usb_replay_debug_msg(message); } } static void sanei_usb_add_endpoint(device_list_type* device, SANE_Int transfer_type, SANE_Int ep_address, SANE_Int ep_direction); static SANE_Status sanei_usb_testing_init() { DBG_INIT(); if (testing_mode == sanei_usb_testing_mode_record) { testing_xml_doc = xmlNewDoc((const xmlChar*)"1.0"); return SANE_STATUS_GOOD; } if (device_number != 0) return SANE_STATUS_INVAL; // already opened xmlNode* el_root = xmlDocGetRootElement(testing_xml_doc); if (xmlStrcmp(el_root->name, (const xmlChar*)"device_capture") != 0) { DBG(1, "%s: the given file is not USB capture\n", __func__); return SANE_STATUS_INVAL; } xmlNode* el_description = sanei_xml_find_first_child_with_name(el_root, "description"); if (el_description == NULL) { DBG(1, "%s: could not find description node\n", __func__); return SANE_STATUS_INVAL; } int device_id = sanei_xml_get_prop_uint(el_description, "id_vendor"); if (device_id < 0) { DBG(1, "%s: no id_vendor attr in description node\n", __func__); return SANE_STATUS_INVAL; } int product_id = sanei_xml_get_prop_uint(el_description, "id_product"); if (product_id < 0) { DBG(1, "%s: no id_product attr in description node\n", __func__); return SANE_STATUS_INVAL; } xmlNode* el_configurations = sanei_xml_find_first_child_with_name(el_description, "configurations"); if (el_configurations == NULL) { DBG(1, "%s: could not find configurations node\n", __func__); return SANE_STATUS_INVAL; } xmlNode* el_configuration = sanei_xml_find_first_child_with_name(el_configurations, "configuration"); if (el_configuration == NULL) { DBG(1, "%s: no configuration nodes\n", __func__); return SANE_STATUS_INVAL; } while (el_configuration != NULL) { xmlNode* el_interface = sanei_xml_find_first_child_with_name(el_configuration, "interface"); while (el_interface != NULL) { device_list_type device; memset(&device, 0, sizeof(device)); device.devname = strdup(testing_xml_path); // other code shouldn't depend on method because testing_mode is // sanei_usb_testing_mode_replay device.method = sanei_usb_method_libusb; device.vendor = device_id; device.product = product_id; device.interface_nr = sanei_xml_get_prop_uint(el_interface, "number"); if (device.interface_nr < 0) { DBG(1, "%s: no number attr in interface node\n", __func__); return SANE_STATUS_INVAL; } xmlNode* el_endpoint = sanei_xml_find_first_child_with_name(el_interface, "endpoint"); while (el_endpoint != NULL) { char* transfer_attr = sanei_xml_get_prop(el_endpoint, "transfer_type"); int address = sanei_xml_get_prop_uint(el_endpoint, "address"); char* direction_attr = sanei_xml_get_prop(el_endpoint, "direction"); int direction_is_in = strcmp(direction_attr, "IN") == 0 ? 1 : 0; int transfer_type = -1; if (strcmp(transfer_attr, "INTERRUPT") == 0) transfer_type = USB_ENDPOINT_TYPE_INTERRUPT; else if (strcmp(transfer_attr, "BULK") == 0) transfer_type = USB_ENDPOINT_TYPE_BULK; else if (strcmp(transfer_attr, "ISOCHRONOUS") == 0) transfer_type = USB_ENDPOINT_TYPE_ISOCHRONOUS; else if (strcmp(transfer_attr, "CONTROL") == 0) transfer_type = USB_ENDPOINT_TYPE_CONTROL; else { DBG(3, "%s: unknown endpoint type %s\n", __func__, transfer_attr); } if (transfer_type >= 0) { sanei_usb_add_endpoint(&device, transfer_type, address, direction_is_in); } xmlFree(transfer_attr); xmlFree(direction_attr); el_endpoint = sanei_xml_find_next_child_with_name(el_endpoint, "endpoint"); } device.alt_setting = 0; device.missing = 0; memcpy(&(devices[device_number]), &device, sizeof(device)); device_number++; el_interface = sanei_xml_find_next_child_with_name(el_interface, "interface"); } el_configuration = sanei_xml_find_next_child_with_name(el_configurations, "configuration"); } xmlNode* el_transactions = sanei_xml_find_first_child_with_name(el_root, "transactions"); if (el_transactions == NULL) { DBG(1, "%s: could not find transactions node\n", __func__); return SANE_STATUS_INVAL; } xmlNode* el_transaction = xmlFirstElementChild(el_transactions); el_transaction = sanei_xml_skip_non_tx_nodes(el_transaction); if (el_transaction == NULL) { DBG(1, "%s: no transactions within capture\n", __func__); return SANE_STATUS_INVAL; } testing_xml_next_tx_node = el_transaction; return SANE_STATUS_GOOD; } static void sanei_usb_testing_exit() { if (testing_development_mode || testing_mode == sanei_usb_testing_mode_record) { if (testing_mode == sanei_usb_testing_mode_record) { xmlAddNextSibling(testing_append_commands_node, xmlNewText((const xmlChar*)"\n ")); free(testing_record_backend); } xmlSaveFileEnc(testing_xml_path, testing_xml_doc, "UTF-8"); } xmlFreeDoc(testing_xml_doc); free(testing_xml_path); xmlCleanupParser(); // reset testing-related all data to initial values testing_development_mode = 0; testing_already_opened = 0; testing_known_commands_input_failed = 0; testing_last_known_seq = 0; testing_record_backend = NULL; testing_append_commands_node = NULL; testing_xml_path = NULL; testing_xml_doc = NULL; testing_xml_next_tx_node = NULL; } #else // WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_testing_enable_replay(SANE_String_Const path, int development_mode) { (void) path; (void) development_mode; DBG(1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; } SANE_Status sanei_usb_testing_enable_record(SANE_String_Const path, SANE_String_Const be_name) { (void) path; (void) be_name; DBG(1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; } SANE_String sanei_usb_testing_get_backend() { return NULL; } SANE_Bool sanei_usb_is_replay_mode_enabled() { return SANE_FALSE; } void sanei_usb_testing_record_clear() { } void sanei_usb_testing_record_message(SANE_String_Const message) { (void) message; } #endif // WITH_USB_RECORD_REPLAY void sanei_usb_init (void) { #ifdef HAVE_LIBUSB int ret; #endif /* HAVE_LIBUSB */ DBG_INIT (); #ifdef DBG_LEVEL debug_level = DBG_LEVEL; #else debug_level = 0; #endif /* if no device yet, clean up memory */ if(device_number==0) memset (devices, 0, sizeof (devices)); #if WITH_USB_RECORD_REPLAY if (testing_mode != sanei_usb_testing_mode_disabled) { if (initialized == 0) { if (sanei_usb_testing_init() != SANE_STATUS_GOOD) { DBG(1, "%s: failed initializing fake USB stack\n", __func__); return; } } if (testing_mode == sanei_usb_testing_mode_replay) { initialized++; return; } } #endif /* initialize USB with old libusb library */ #ifdef HAVE_LIBUSB_LEGACY DBG (4, "%s: Looking for libusb devices\n", __func__); usb_init (); #ifdef DBG_LEVEL if (DBG_LEVEL > 4) usb_set_debug (255); #endif /* DBG_LEVEL */ #endif /* HAVE_LIBUSB_LEGACY */ /* initialize USB using libusb-1.0 */ #ifdef HAVE_LIBUSB if (!sanei_usb_ctx) { DBG (4, "%s: initializing libusb-1.0\n", __func__); ret = libusb_init (&sanei_usb_ctx); if (ret < 0) { DBG (1, "%s: failed to initialize libusb-1.0, error %d\n", __func__, ret); return; } #ifdef DBG_LEVEL if (DBG_LEVEL > 4) #if LIBUSB_API_VERSION >= 0x01000106 libusb_set_option (sanei_usb_ctx, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO); #else libusb_set_debug (sanei_usb_ctx, 3); #endif /* LIBUSB_API_VERSION */ #endif /* DBG_LEVEL */ } #endif /* HAVE_LIBUSB */ #if !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) DBG (4, "%s: SANE is built without support for libusb\n", __func__); #endif /* sanei_usb is now initialized */ initialized++; /* do a first scan of USB buses to fill device list */ sanei_usb_scan_devices(); } void sanei_usb_exit (void) { int i; /* check we have really some work to do */ if(initialized==0) { DBG (1, "%s: sanei_usb in not initialized!\n", __func__); return; } /* decrement the use count */ initialized--; /* if we reach 0, free allocated resources */ if(initialized==0) { #if WITH_USB_RECORD_REPLAY if (testing_mode != sanei_usb_testing_mode_disabled) { sanei_usb_testing_exit(); } #endif // WITH_USB_RECORD_REPLAY /* free allocated resources */ DBG (4, "%s: freeing resources\n", __func__); for (i = 0; i < device_number; i++) { if (devices[i].devname != NULL) { DBG (5, "%s: freeing device %02d\n", __func__, i); free(devices[i].devname); devices[i].devname=NULL; } } #ifdef HAVE_LIBUSB if (sanei_usb_ctx) { libusb_exit (sanei_usb_ctx); /* reset libusb-1.0 context */ sanei_usb_ctx=NULL; } #endif /* reset device_number */ device_number=0; } else { DBG (4, "%s: not freeing resources since use count is %d\n", __func__, initialized); } return; } #ifdef HAVE_USBCALLS /** scan for devices through usbcall method * Check for devices using OS/2 USBCALLS Interface */ static void usbcall_scan_devices(void) { SANE_Char devname[1024]; device_list_type device; CHAR ucData[2048]; struct usb_device_descriptor *pDevDesc; struct usb_config_descriptor *pCfgDesc; APIRET rc; ULONG ulNumDev, ulDev, ulBufLen; ulBufLen = sizeof(ucData); memset(&ucData,0,sizeof(ucData)); rc = UsbQueryNumberDevices( &ulNumDev); if(rc==0 && ulNumDev) { for (ulDev=1; ulDev<=ulNumDev; ulDev++) { UsbQueryDeviceReport(ulDev, &ulBufLen, ucData); pDevDesc = (struct usb_device_descriptor*) ucData; pCfgDesc = (struct usb_config_descriptor*) (ucData+sizeof(struct usb_device_descriptor)); int interface=0; SANE_Bool found; if (!pCfgDesc->bConfigurationValue) { DBG (1, "%s: device 0x%04x/0x%04x is not configured\n", __func__, pDevDesc->idVendor, pDevDesc->idProduct); continue; } if (pDevDesc->idVendor == 0 || pDevDesc->idProduct == 0) { DBG (5, "%s: device 0x%04x/0x%04x looks like a root hub\n", __func__, pDevDesc->idVendor, pDevDesc->idProduct); continue; } found = SANE_FALSE; if (pDevDesc->bDeviceClass == USB_CLASS_VENDOR_SPEC) { found = SANE_TRUE; } if (!found) { DBG (5, "%s: device 0x%04x/0x%04x: no suitable interfaces\n", __func__, pDevDesc->idVendor, pDevDesc->idProduct); continue; } snprintf (devname, sizeof (devname), "usbcalls:%d", ulDev); memset (&device, 0, sizeof (device)); device.devname = strdup (devname); device.fd = ulDev; /* store usbcalls device number */ device.vendor = pDevDesc->idVendor; device.product = pDevDesc->idProduct; device.method = sanei_usb_method_usbcalls; device.interface_nr = interface; device.alt_setting = 0; DBG (4, "%s: found usbcalls device (0x%04x/0x%04x) as device number %s\n", __func__, pDevDesc->idVendor, pDevDesc->idProduct,device.devname); store_device(device); } } } #endif /* HAVE_USBCALLS */ #if !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) /** scan for devices using kernel device. * Check for devices using kernel device */ static void kernel_scan_devices(void) { SANE_String *prefix; SANE_String prefixlist[] = { #if defined(__linux__) "/dev/", "usbscanner", "/dev/usb/", "scanner", #elif defined(__FreeBSD__) || defined(__NetBSD__) || defined (__OpenBSD__) || defined (__DragonFly__) "/dev/", "uscanner", #elif defined(__BEOS__) "/dev/scanner/usb/", "", #endif 0, 0 }; SANE_Int vendor, product; SANE_Char devname[1024]; int fd; device_list_type device; DBG (4, "%s: Looking for kernel scanner devices\n", __func__); /* Check for devices using the kernel scanner driver */ for (prefix = prefixlist; *prefix; prefix += 2) { SANE_String dir_name = *prefix; SANE_String base_name = *(prefix + 1); struct stat stat_buf; DIR *dir; struct dirent *dir_entry; if (stat (dir_name, &stat_buf) < 0) { DBG (5, "%s: can't stat %s: %s\n", __func__, dir_name, strerror (errno)); continue; } if (!S_ISDIR (stat_buf.st_mode)) { DBG (5, "%s: %s is not a directory\n", __func__, dir_name); continue; } if ((dir = opendir (dir_name)) == 0) { DBG (5, "%s: cannot read directory %s: %s\n", __func__, dir_name, strerror (errno)); continue; } while ((dir_entry = readdir (dir)) != 0) { /* skip standard dir entries */ if (strcmp (dir_entry->d_name, ".") == 0 || strcmp (dir_entry->d_name, "..") == 0) continue; if (strncmp (base_name, dir_entry->d_name, strlen (base_name)) == 0) { if (strlen (dir_name) + strlen (dir_entry->d_name) + 1 > sizeof (devname)) continue; sprintf (devname, "%s%s", dir_name, dir_entry->d_name); fd = -1; #ifdef HAVE_RESMGR fd = rsm_open_device (devname, O_RDWR); #endif if (fd == -1) fd = open (devname, O_RDWR); if (fd < 0) { DBG (5, "%s: couldn't open %s: %s\n", __func__, devname, strerror (errno)); continue; } vendor = -1; product = -1; kernel_get_vendor_product (fd, devname, &vendor, &product); close (fd); memset (&device, 0, sizeof (device)); device.devname = strdup (devname); if (!device.devname) { closedir (dir); return; } device.vendor = vendor; device.product = product; device.method = sanei_usb_method_scanner_driver; DBG (4, "%s: found kernel scanner device (0x%04x/0x%04x) at %s\n", __func__, vendor, product, devname); store_device(device); } } closedir (dir); } } #endif /* !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) */ #ifdef HAVE_LIBUSB_LEGACY /** scan for devices using old libusb * Check for devices using 0.1.x libusb */ static void libusb_scan_devices(void) { struct usb_bus *bus; struct usb_device *dev; SANE_Char devname[1024]; device_list_type device; DBG (4, "%s: Looking for libusb devices\n", __func__); usb_find_busses (); usb_find_devices (); /* Check for the matching device */ for (bus = usb_get_busses (); bus; bus = bus->next) { for (dev = bus->devices; dev; dev = dev->next) { int interface; SANE_Bool found = SANE_FALSE; if (!dev->config) { DBG (1, "%s: device 0x%04x/0x%04x is not configured\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct); continue; } if (dev->descriptor.idVendor == 0 || dev->descriptor.idProduct == 0) { DBG (5, "%s: device 0x%04x/0x%04x looks like a root hub\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct); continue; } for (interface = 0; interface < dev->config[0].bNumInterfaces && !found; interface++) { switch (dev->descriptor.bDeviceClass) { case USB_CLASS_VENDOR_SPEC: found = SANE_TRUE; break; case USB_CLASS_PER_INTERFACE: if (dev->config[0].interface[interface].num_altsetting == 0 || !dev->config[0].interface[interface].altsetting) { DBG (1, "%s: device 0x%04x/0x%04x doesn't " "have an altsetting for interface %d\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct, interface); continue; } switch (dev->config[0].interface[interface].altsetting[0]. bInterfaceClass) { case USB_CLASS_VENDOR_SPEC: case USB_CLASS_PER_INTERFACE: case 6: /* imaging? */ case 16: /* data? */ found = SANE_TRUE; break; } break; } if (!found) DBG (5, "%s: device 0x%04x/0x%04x, interface %d " "doesn't look like a " "scanner (%d/%d)\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct, interface, dev->descriptor.bDeviceClass, dev->config[0].interface[interface].num_altsetting != 0 ? dev->config[0].interface[interface].altsetting[0]. bInterfaceClass : -1); } interface--; if (!found) { DBG (5, "%s: device 0x%04x/0x%04x: no suitable interfaces\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct); continue; } memset (&device, 0, sizeof (device)); device.libusb_device = dev; snprintf (devname, sizeof (devname), "libusb:%s:%s", dev->bus->dirname, dev->filename); device.devname = strdup (devname); if (!device.devname) return; device.vendor = dev->descriptor.idVendor; device.product = dev->descriptor.idProduct; device.method = sanei_usb_method_libusb; device.interface_nr = interface; device.alt_setting = 0; DBG (4, "%s: found libusb device (0x%04x/0x%04x) interface " "%d at %s\n", __func__, dev->descriptor.idVendor, dev->descriptor.idProduct, interface, devname); store_device(device); } } } #endif /* HAVE_LIBUSB_LEGACY */ #ifdef HAVE_LIBUSB /** scan for devices using libusb * Check for devices using libusb-1.0 */ static void libusb_scan_devices(void) { device_list_type device; SANE_Char devname[1024]; libusb_device **devlist; ssize_t ndev; libusb_device *dev; libusb_device_handle *hdl; struct libusb_device_descriptor desc; struct libusb_config_descriptor *config0; unsigned short vid, pid; unsigned char busno, address; int config; int interface; int ret; int i; DBG (4, "%s: Looking for libusb-1.0 devices\n", __func__); ndev = libusb_get_device_list (sanei_usb_ctx, &devlist); if (ndev < 0) { DBG (1, "%s: failed to get libusb-1.0 device list, error %d\n", __func__, (int) ndev); return; } for (i = 0; i < ndev; i++) { SANE_Bool found = SANE_FALSE; dev = devlist[i]; busno = libusb_get_bus_number (dev); address = libusb_get_device_address (dev); ret = libusb_get_device_descriptor (dev, &desc); if (ret < 0) { DBG (1, "%s: could not get device descriptor for device at %03d:%03d (err %d)\n", __func__, busno, address, ret); continue; } vid = desc.idVendor; pid = desc.idProduct; if ((vid == 0) || (pid == 0)) { DBG (5, "%s: device 0x%04x/0x%04x at %03d:%03d looks like a root hub\n", __func__, vid, pid, busno, address); continue; } ret = libusb_open (dev, &hdl); if (ret < 0) { DBG (1, "%s: skipping device 0x%04x/0x%04x at %03d:%03d: cannot open: %s\n", __func__, vid, pid, busno, address, sanei_libusb_strerror (ret)); continue; } ret = libusb_get_configuration (hdl, &config); libusb_close (hdl); if (ret < 0) { DBG (1, "%s: could not get configuration for device 0x%04x/0x%04x at %03d:%03d (err %d)\n", __func__, vid, pid, busno, address, ret); continue; } #if !defined(SANEI_ALLOW_UNCONFIGURED_DEVICES) if (config == 0) { DBG (1, "%s: device 0x%04x/0x%04x at %03d:%03d is not configured\n", __func__, vid, pid, busno, address); continue; } #endif ret = libusb_get_config_descriptor (dev, 0, &config0); if (ret < 0) { DBG (1, "%s: could not get config[0] descriptor for device 0x%04x/0x%04x at %03d:%03d (err %d)\n", __func__, vid, pid, busno, address, ret); continue; } for (interface = 0; (interface < config0->bNumInterfaces) && !found; interface++) { switch (desc.bDeviceClass) { case LIBUSB_CLASS_VENDOR_SPEC: found = SANE_TRUE; break; case LIBUSB_CLASS_PER_INTERFACE: if ((config0->interface[interface].num_altsetting == 0) || !config0->interface[interface].altsetting) { DBG (1, "%s: device 0x%04x/0x%04x doesn't " "have an altsetting for interface %d\n", __func__, vid, pid, interface); continue; } switch (config0->interface[interface].altsetting[0].bInterfaceClass) { case LIBUSB_CLASS_VENDOR_SPEC: case LIBUSB_CLASS_PER_INTERFACE: case LIBUSB_CLASS_PTP: case 16: /* data? */ found = SANE_TRUE; break; } break; } if (!found) DBG (5, "%s: device 0x%04x/0x%04x, interface %d " "doesn't look like a scanner (%d/%d)\n", __func__, vid, pid, interface, desc.bDeviceClass, (config0->interface[interface].num_altsetting != 0) ? config0->interface[interface].altsetting[0].bInterfaceClass : -1); } libusb_free_config_descriptor (config0); interface--; if (!found) { DBG (5, "%s: device 0x%04x/0x%04x at %03d:%03d: no suitable interfaces\n", __func__, vid, pid, busno, address); continue; } memset (&device, 0, sizeof (device)); device.lu_device = libusb_ref_device(dev); snprintf (devname, sizeof (devname), "libusb:%03d:%03d", busno, address); device.devname = strdup (devname); if (!device.devname) return; device.vendor = vid; device.product = pid; device.method = sanei_usb_method_libusb; device.interface_nr = interface; device.alt_setting = 0; DBG (4, "%s: found libusb-1.0 device (0x%04x/0x%04x) interface " "%d at %s\n", __func__, vid, pid, interface, devname); store_device (device); } libusb_free_device_list (devlist, 1); } #endif /* HAVE_LIBUSB */ void sanei_usb_scan_devices (void) { int count; int i; /* check USB has been initialized first */ if(initialized==0) { DBG (1, "%s: sanei_usb is not initialized!\n", __func__); return; } if (testing_mode == sanei_usb_testing_mode_replay) { // device added in sanei_usb_testing_init() return; } /* we mark all already detected devices as missing */ /* each scan method will reset this value to 0 (not missing) * when storing the device */ DBG (4, "%s: marking existing devices\n", __func__); for (i = 0; i < device_number; i++) { devices[i].missing++; } /* Check for devices using the kernel scanner driver */ #if !defined(HAVE_LIBUSB_LEGACY) && !defined(HAVE_LIBUSB) kernel_scan_devices(); #endif #if defined(HAVE_LIBUSB_LEGACY) || defined(HAVE_LIBUSB) /* Check for devices using libusb (old or new)*/ libusb_scan_devices(); #endif #ifdef HAVE_USBCALLS /* Check for devices using OS/2 USBCALLS Interface */ usbcall_scan_devices(); #endif /* display found devices */ if (debug_level > 5) { count=0; for (i = 0; i < device_number; i++) { if(!devices[i].missing) { count++; DBG (6, "%s: device %02d is %s\n", __func__, i, devices[i].devname); } } DBG (5, "%s: found %d devices\n", __func__, count); } } /* This logically belongs to sanei_config.c but not every backend that uses sanei_config() wants to depend on sanei_usb. */ void sanei_usb_attach_matching_devices (const char *name, SANE_Status (*attach) (const char *dev)) { char *vendor, *product; if (strncmp (name, "usb", 3) == 0) { SANE_Word vendorID = 0, productID = 0; name += 3; name = sanei_config_skip_whitespace (name); if (*name) { name = sanei_config_get_string (name, &vendor); if (vendor) { vendorID = strtol (vendor, 0, 0); free (vendor); } name = sanei_config_skip_whitespace (name); } name = sanei_config_skip_whitespace (name); if (*name) { name = sanei_config_get_string (name, &product); if (product) { productID = strtol (product, 0, 0); free (product); } } sanei_usb_find_devices (vendorID, productID, attach); } else (*attach) (name); } SANE_Status sanei_usb_get_vendor_product_byname (SANE_String_Const devname, SANE_Word * vendor, SANE_Word * product) { int i; SANE_Bool found = SANE_FALSE; for (i = 0; i < device_number && devices[i].devname; i++) { if (!devices[i].missing && strcmp (devices[i].devname, devname) == 0) { found = SANE_TRUE; break; } } if (!found) { DBG (1, "sanei_usb_get_vendor_product_byname: can't find device `%s' in list\n", devname); return SANE_STATUS_INVAL; } if ((devices[i].vendor == 0) && (devices[i].product == 0)) { DBG (1, "sanei_usb_get_vendor_product_byname: not support for this method\n"); return SANE_STATUS_UNSUPPORTED; } if (vendor) *vendor = devices[i].vendor; if (product) *product = devices[i].product; return SANE_STATUS_GOOD; } SANE_Status sanei_usb_get_vendor_product (SANE_Int dn, SANE_Word * vendor, SANE_Word * product) { SANE_Word vendorID = 0; SANE_Word productID = 0; if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_get_vendor_product: dn >= device number || dn < 0\n"); return SANE_STATUS_INVAL; } if (devices[dn].missing >= 1) { DBG (1, "sanei_usb_get_vendor_product: dn=%d is missing!\n",dn); return SANE_STATUS_INVAL; } /* kernel, usbcal and libusb methods store these when device scanning * is done, so we can use them directly */ vendorID = devices[dn].vendor; productID = devices[dn].product; if (vendor) *vendor = vendorID; if (product) *product = productID; if (!vendorID || !productID) { DBG (3, "sanei_usb_get_vendor_product: device %d: Your OS doesn't " "seem to support detection of vendor+product ids\n", dn); return SANE_STATUS_UNSUPPORTED; } else { DBG (3, "sanei_usb_get_vendor_product: device %d: vendorID: 0x%04x, " "productID: 0x%04x\n", dn, vendorID, productID); return SANE_STATUS_GOOD; } } SANE_Status sanei_usb_find_devices (SANE_Int vendor, SANE_Int product, SANE_Status (*attach) (SANE_String_Const dev)) { SANE_Int dn = 0; DBG (3, "sanei_usb_find_devices: vendor=0x%04x, product=0x%04x\n", vendor, product); while (devices[dn].devname && dn < device_number) { if (devices[dn].vendor == vendor && devices[dn].product == product && !devices[dn].missing && attach) attach (devices[dn].devname); dn++; } return SANE_STATUS_GOOD; } void sanei_usb_set_endpoint (SANE_Int dn, SANE_Int ep_type, SANE_Int ep) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_set_endpoint: dn >= device number || dn < 0\n"); return; } DBG (5, "sanei_usb_set_endpoint: Setting endpoint of type 0x%02x to 0x%02x\n", ep_type, ep); switch (ep_type) { case USB_DIR_IN|USB_ENDPOINT_TYPE_BULK: devices[dn].bulk_in_ep = ep; break; case USB_DIR_OUT|USB_ENDPOINT_TYPE_BULK: devices[dn].bulk_out_ep = ep; break; case USB_DIR_IN|USB_ENDPOINT_TYPE_ISOCHRONOUS: devices[dn].iso_in_ep = ep; break; case USB_DIR_OUT|USB_ENDPOINT_TYPE_ISOCHRONOUS: devices[dn].iso_out_ep = ep; break; case USB_DIR_IN|USB_ENDPOINT_TYPE_INTERRUPT: devices[dn].int_in_ep = ep; break; case USB_DIR_OUT|USB_ENDPOINT_TYPE_INTERRUPT: devices[dn].int_out_ep = ep; break; case USB_DIR_IN|USB_ENDPOINT_TYPE_CONTROL: devices[dn].control_in_ep = ep; break; case USB_DIR_OUT|USB_ENDPOINT_TYPE_CONTROL: devices[dn].control_out_ep = ep; break; } } #if HAVE_LIBUSB_LEGACY || HAVE_LIBUSB || HAVE_USBCALLS || WITH_USB_RECORD_REPLAY static const char* sanei_usb_transfer_type_desc(SANE_Int transfer_type) { switch (transfer_type) { case USB_ENDPOINT_TYPE_INTERRUPT: return "interrupt"; case USB_ENDPOINT_TYPE_BULK: return "bulk"; case USB_ENDPOINT_TYPE_ISOCHRONOUS: return "isochronous"; case USB_ENDPOINT_TYPE_CONTROL: return "control"; } return NULL; } // Similar sanei_usb_set_endpoint, but ignores duplicate endpoints static void sanei_usb_add_endpoint(device_list_type* device, SANE_Int transfer_type, SANE_Int ep_address, SANE_Int ep_direction) { DBG(5, "%s: direction: %d, address: %d, transfer_type: %d\n", __func__, ep_direction, ep_address, transfer_type); SANE_Int* ep_in = NULL; SANE_Int* ep_out = NULL; const char* transfer_type_msg = sanei_usb_transfer_type_desc(transfer_type); switch (transfer_type) { case USB_ENDPOINT_TYPE_INTERRUPT: ep_in = &device->int_in_ep; ep_out = &device->int_out_ep; break; case USB_ENDPOINT_TYPE_BULK: ep_in = &device->bulk_in_ep; ep_out = &device->bulk_out_ep; break; case USB_ENDPOINT_TYPE_ISOCHRONOUS: ep_in = &device->iso_in_ep; ep_out = &device->iso_out_ep; break; case USB_ENDPOINT_TYPE_CONTROL: ep_in = &device->control_in_ep; ep_out = &device->control_out_ep; break; } DBG(5, "%s: found %s-%s endpoint (address 0x%02x)\n", __func__, transfer_type_msg, ep_direction ? "in" : "out", ep_address); if (ep_direction) // in { if (*ep_in) DBG(3, "%s: we already have a %s-in endpoint " "(address: 0x%02x), ignoring the new one\n", __func__, transfer_type_msg, *ep_in); else *ep_in = ep_address; } else { if (*ep_out) DBG(3, "%s: we already have a %s-out endpoint " "(address: 0x%02x), ignoring the new one\n", __func__, transfer_type_msg, *ep_out); else *ep_out = ep_address; } } #endif // HAVE_LIBUSB_LEGACY || HAVE_LIBUSB || HAVE_USBCALLS SANE_Int sanei_usb_get_endpoint (SANE_Int dn, SANE_Int ep_type) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_get_endpoint: dn >= device number || dn < 0\n"); return 0; } switch (ep_type) { case USB_DIR_IN|USB_ENDPOINT_TYPE_BULK: return devices[dn].bulk_in_ep; case USB_DIR_OUT|USB_ENDPOINT_TYPE_BULK: return devices[dn].bulk_out_ep; case USB_DIR_IN|USB_ENDPOINT_TYPE_ISOCHRONOUS: return devices[dn].iso_in_ep; case USB_DIR_OUT|USB_ENDPOINT_TYPE_ISOCHRONOUS: return devices[dn].iso_out_ep; case USB_DIR_IN|USB_ENDPOINT_TYPE_INTERRUPT: return devices[dn].int_in_ep; case USB_DIR_OUT|USB_ENDPOINT_TYPE_INTERRUPT: return devices[dn].int_out_ep; case USB_DIR_IN|USB_ENDPOINT_TYPE_CONTROL: return devices[dn].control_in_ep; case USB_DIR_OUT|USB_ENDPOINT_TYPE_CONTROL: return devices[dn].control_out_ep; default: return 0; } } #if WITH_USB_RECORD_REPLAY static void sanei_xml_indent_child(xmlNode* parent, unsigned indent_count) { indent_count *= 4; xmlChar* indent_str = malloc(indent_count + 2); indent_str[0] = '\n'; memset(indent_str + 1, ' ', indent_count); indent_str[indent_count + 1] = '\0'; xmlAddChild(parent, xmlNewText(indent_str)); free(indent_str); } static void sanei_usb_record_open(SANE_Int dn) { if (testing_already_opened) return; xmlNode* e_root = xmlNewNode(NULL, (const xmlChar*) "device_capture"); xmlDocSetRootElement(testing_xml_doc, e_root); xmlNewProp(e_root, (const xmlChar*)"backend", (const xmlChar*) testing_record_backend); sanei_xml_indent_child(e_root, 1); xmlNode* e_description = xmlNewChild(e_root, NULL, (const xmlChar*) "description", NULL); sanei_xml_set_hex_attr(e_description, "id_vendor", devices[dn].vendor); sanei_xml_set_hex_attr(e_description, "id_product", devices[dn].product); sanei_xml_indent_child(e_description, 2); xmlNode* e_configurations = xmlNewChild(e_description, NULL, (const xmlChar*) "configurations", NULL); sanei_xml_indent_child(e_configurations, 3); xmlNode* e_configuration = xmlNewChild(e_configurations, NULL, (const xmlChar*) "configuration", NULL); sanei_xml_set_uint_attr(e_configuration, "number", 1); sanei_xml_indent_child(e_configuration, 4); xmlNode* e_interface = xmlNewChild(e_configuration, NULL, (const xmlChar*) "interface", NULL); sanei_xml_set_uint_attr(e_interface, "number", devices[dn].interface_nr); struct endpoint_data_desc { const char* transfer_type; const char* direction; SANE_Int ep_address; }; struct endpoint_data_desc endpoints[8] = { { "BULK", "IN", devices[dn].bulk_in_ep }, { "BULK", "OUT", devices[dn].bulk_out_ep }, { "ISOCHRONOUS", "IN", devices[dn].iso_in_ep }, { "ISOCHRONOUS", "OUT", devices[dn].iso_out_ep }, { "INTERRUPT", "IN", devices[dn].int_in_ep }, { "INTERRUPT", "OUT", devices[dn].int_out_ep }, { "CONTROL", "IN", devices[dn].control_in_ep }, { "CONTROL", "OUT", devices[dn].control_out_ep } }; for (int i = 0; i < 8; ++i) { if (endpoints[i].ep_address) { sanei_xml_indent_child(e_interface, 5); xmlNode* e_endpoint = xmlNewChild(e_interface, NULL, (const xmlChar*)"endpoint", NULL); xmlNewProp(e_endpoint, (const xmlChar*)"transfer_type", (const xmlChar*) endpoints[i].transfer_type); sanei_xml_set_uint_attr(e_endpoint, "number", endpoints[i].ep_address & 0x0f); xmlNewProp(e_endpoint, (const xmlChar*)"direction", (const xmlChar*) endpoints[i].direction); sanei_xml_set_hex_attr(e_endpoint, "address", endpoints[i].ep_address); } } sanei_xml_indent_child(e_interface, 4); sanei_xml_indent_child(e_configuration, 3); sanei_xml_indent_child(e_configurations, 2); sanei_xml_indent_child(e_description, 1); sanei_xml_indent_child(e_root, 1); xmlNode* e_transactions = xmlNewChild(e_root, NULL, (const xmlChar*)"transactions", NULL); // add an empty node so that we have something to append to testing_append_commands_node = xmlAddChild(e_transactions, xmlNewText((const xmlChar*)"")); testing_already_opened = 1; } #endif // WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_open (SANE_String_Const devname, SANE_Int * dn) { int devcount; SANE_Bool found = SANE_FALSE; DBG (5, "sanei_usb_open: trying to open device `%s'\n", devname); if (!dn) { DBG (1, "sanei_usb_open: can't open `%s': dn == NULL\n", devname); return SANE_STATUS_INVAL; } for (devcount = 0; devcount < device_number && devices[devcount].devname != 0; devcount++) { if (!devices[devcount].missing && strcmp (devices[devcount].devname, devname) == 0) { if (devices[devcount].open) { DBG (1, "sanei_usb_open: device `%s' already open\n", devname); return SANE_STATUS_INVAL; } found = SANE_TRUE; break; } } if (!found) { DBG (1, "sanei_usb_open: can't find device `%s' in list\n", devname); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_replay) { DBG (1, "sanei_usb_open: opening fake USB device\n"); // the device configuration has been already filled in // sanei_usb_testing_init() } else if (devices[devcount].method == sanei_usb_method_libusb) { #ifdef HAVE_LIBUSB_LEGACY struct usb_device *dev; struct usb_interface_descriptor *interface; int result, num; int c, i, a; devices[devcount].libusb_handle = usb_open (devices[devcount].libusb_device); if (!devices[devcount].libusb_handle) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: can't open device `%s': %s\n", devname, strerror (errno)); if (errno == EPERM || errno == EACCES) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (errno == EBUSY) { DBG (1, "Maybe the kernel scanner driver claims the " "scanner's interface?\n"); status = SANE_STATUS_DEVICE_BUSY; } return status; } dev = usb_device (devices[devcount].libusb_handle); /* Set the configuration */ if (!dev->config) { DBG (1, "sanei_usb_open: device `%s' not configured?\n", devname); return SANE_STATUS_INVAL; } if (dev->descriptor.bNumConfigurations > 1) { DBG (3, "sanei_usb_open: more than one " "configuration (%d), choosing first config (%d)\n", dev->descriptor.bNumConfigurations, dev->config[0].bConfigurationValue); result = usb_set_configuration (devices[devcount].libusb_handle, dev->config[0].bConfigurationValue); if (result < 0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: libusb complained: %s\n", usb_strerror ()); if (errno == EPERM || errno == EACCES) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (errno == EBUSY) { DBG (3, "Maybe the kernel scanner driver or usblp claims the " "interface? Ignoring this error...\n"); status = SANE_STATUS_GOOD; } if (status != SANE_STATUS_GOOD) { usb_close (devices[devcount].libusb_handle); return status; } } } /* Claim the interface */ result = usb_claim_interface (devices[devcount].libusb_handle, devices[devcount].interface_nr); if (result < 0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: libusb complained: %s\n", usb_strerror ()); if (errno == EPERM || errno == EACCES) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (errno == EBUSY) { DBG (1, "Maybe the kernel scanner driver claims the " "scanner's interface?\n"); status = SANE_STATUS_DEVICE_BUSY; } usb_close (devices[devcount].libusb_handle); return status; } /* Loop through all of the configurations */ for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { /* Loop through all of the interfaces */ for (i = 0; i < dev->config[c].bNumInterfaces; i++) { /* Loop through all of the alternate settings */ for (a = 0; a < dev->config[c].interface[i].num_altsetting; a++) { DBG (5, "sanei_usb_open: configuration nr: %d\n", c); DBG (5, "sanei_usb_open: interface nr: %d\n", i); DBG (5, "sanei_usb_open: alt_setting nr: %d\n", a); /* Start by interfaces found in sanei_usb_init */ if (c == 0 && i != devices[devcount].interface_nr) { DBG (5, "sanei_usb_open: interface %d not detected as " "a scanner by sanei_usb_init, ignoring.\n", i); continue; } interface = &dev->config[c].interface[i].altsetting[a]; /* Now we look for usable endpoints */ for (num = 0; num < interface->bNumEndpoints; num++) { struct usb_endpoint_descriptor *endpoint; int address, direction, transfer_type; endpoint = &interface->endpoint[num]; DBG (5, "sanei_usb_open: endpoint nr: %d\n", num); transfer_type = endpoint->bmAttributes & USB_ENDPOINT_TYPE_MASK; direction = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; sanei_usb_add_endpoint(&devices[devcount], transfer_type, endpoint->bEndpointAddress, direction); } } } } #elif defined(HAVE_LIBUSB) /* libusb-1.0 */ int config; libusb_device *dev; struct libusb_device_descriptor desc; struct libusb_config_descriptor *config0; int result, num; int c, i, a; dev = devices[devcount].lu_device; result = libusb_open (dev, &devices[devcount].lu_handle); if (result < 0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: can't open device `%s': %s\n", devname, sanei_libusb_strerror (result)); if (result == LIBUSB_ERROR_ACCESS) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (result == LIBUSB_ERROR_BUSY) { DBG (1, "Maybe the kernel scanner driver claims the " "scanner's interface?\n"); status = SANE_STATUS_DEVICE_BUSY; } else if (result == LIBUSB_ERROR_NO_MEM) { status = SANE_STATUS_NO_MEM; } return status; } result = libusb_get_configuration (devices[devcount].lu_handle, &config); if (result < 0) { DBG (1, "sanei_usb_open: could not get configuration for device `%s' (err %d)\n", devname, result); return SANE_STATUS_INVAL; } #if !defined(SANEI_ALLOW_UNCONFIGURED_DEVICES) if (config == 0) { DBG (1, "sanei_usb_open: device `%s' not configured?\n", devname); return SANE_STATUS_INVAL; } #endif result = libusb_get_device_descriptor (dev, &desc); if (result < 0) { DBG (1, "sanei_usb_open: could not get device descriptor for device `%s' (err %d)\n", devname, result); return SANE_STATUS_INVAL; } result = libusb_get_config_descriptor (dev, 0, &config0); if (result < 0) { DBG (1, "sanei_usb_open: could not get config[0] descriptor for device `%s' (err %d)\n", devname, result); return SANE_STATUS_INVAL; } /* Set the configuration */ if (desc.bNumConfigurations > 1) { DBG (3, "sanei_usb_open: more than one " "configuration (%d), choosing first config (%d)\n", desc.bNumConfigurations, config0->bConfigurationValue); result = 0; if (config != config0->bConfigurationValue) result = libusb_set_configuration (devices[devcount].lu_handle, config0->bConfigurationValue); if (result < 0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: libusb complained: %s\n", sanei_libusb_strerror (result)); if (result == LIBUSB_ERROR_ACCESS) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (result == LIBUSB_ERROR_BUSY) { DBG (3, "Maybe the kernel scanner driver or usblp claims " "the interface? Ignoring this error...\n"); status = SANE_STATUS_GOOD; } if (status != SANE_STATUS_GOOD) { libusb_close (devices[devcount].lu_handle); libusb_free_config_descriptor (config0); return status; } } } libusb_free_config_descriptor (config0); /* Claim the interface */ result = libusb_claim_interface (devices[devcount].lu_handle, devices[devcount].interface_nr); if (result < 0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: libusb complained: %s\n", sanei_libusb_strerror (result)); if (result == LIBUSB_ERROR_ACCESS) { DBG (1, "Make sure you run as root or set appropriate " "permissions\n"); status = SANE_STATUS_ACCESS_DENIED; } else if (result == LIBUSB_ERROR_BUSY) { DBG (1, "Maybe the kernel scanner driver claims the " "scanner's interface?\n"); status = SANE_STATUS_DEVICE_BUSY; } libusb_close (devices[devcount].lu_handle); return status; } /* Loop through all of the configurations */ for (c = 0; c < desc.bNumConfigurations; c++) { struct libusb_config_descriptor *config; result = libusb_get_config_descriptor (dev, c, &config); if (result < 0) { DBG (1, "sanei_usb_open: could not get config[%d] descriptor for device `%s' (err %d)\n", c, devname, result); continue; } /* Loop through all of the interfaces */ for (i = 0; i < config->bNumInterfaces; i++) { /* Loop through all of the alternate settings */ for (a = 0; a < config->interface[i].num_altsetting; a++) { const struct libusb_interface_descriptor *interface; DBG (5, "sanei_usb_open: configuration nr: %d\n", c); DBG (5, "sanei_usb_open: interface nr: %d\n", i); DBG (5, "sanei_usb_open: alt_setting nr: %d\n", a); /* Start by interfaces found in sanei_usb_init */ if (c == 0 && i != devices[devcount].interface_nr) { DBG (5, "sanei_usb_open: interface %d not detected as " "a scanner by sanei_usb_init, ignoring.\n", i); continue; } interface = &config->interface[i].altsetting[a]; /* Now we look for usable endpoints */ for (num = 0; num < interface->bNumEndpoints; num++) { const struct libusb_endpoint_descriptor *endpoint; int direction, transfer_type, transfer_type_libusb; endpoint = &interface->endpoint[num]; DBG (5, "sanei_usb_open: endpoint nr: %d\n", num); transfer_type_libusb = endpoint->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK; direction = endpoint->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK; // don't rely on LIBUSB_TRANSFER_TYPE_* mapping to // USB_ENDPOINT_TYPE_* even though they'll most likely be // the same switch (transfer_type_libusb) { case LIBUSB_TRANSFER_TYPE_INTERRUPT: transfer_type = USB_ENDPOINT_TYPE_INTERRUPT; break; case LIBUSB_TRANSFER_TYPE_BULK: transfer_type = USB_ENDPOINT_TYPE_BULK; break; case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: transfer_type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS; break; case LIBUSB_TRANSFER_TYPE_CONTROL: transfer_type = USB_ENDPOINT_TYPE_CONTROL; break; } sanei_usb_add_endpoint(&devices[devcount], transfer_type, endpoint->bEndpointAddress, direction); } } } libusb_free_config_descriptor (config); } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ DBG (1, "sanei_usb_open: can't open device `%s': " "libusb support missing\n", devname); return SANE_STATUS_UNSUPPORTED; #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ } else if (devices[devcount].method == sanei_usb_method_scanner_driver) { #ifdef FD_CLOEXEC long int flag; #endif /* Using kernel scanner driver */ devices[devcount].fd = -1; #ifdef HAVE_RESMGR devices[devcount].fd = rsm_open_device (devname, O_RDWR); #endif if (devices[devcount].fd == -1) devices[devcount].fd = open (devname, O_RDWR); if (devices[devcount].fd < 0) { SANE_Status status = SANE_STATUS_INVAL; if (errno == EACCES) status = SANE_STATUS_ACCESS_DENIED; else if (errno == ENOENT) { DBG (5, "sanei_usb_open: open of `%s' failed: %s\n", devname, strerror (errno)); return status; } DBG (1, "sanei_usb_open: open of `%s' failed: %s\n", devname, strerror (errno)); return status; } #ifdef FD_CLOEXEC flag = fcntl (devices[devcount].fd, F_GETFD); if (flag >= 0) { if (fcntl (devices[devcount].fd, F_SETFD, flag | FD_CLOEXEC) < 0) DBG (1, "sanei_usb_open: fcntl of `%s' failed: %s\n", devname, strerror (errno)); } #endif } else if (devices[devcount].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS CHAR ucData[2048]; struct usb_device_descriptor *pDevDesc; struct usb_config_descriptor *pCfgDesc; struct usb_interface_descriptor *interface; struct usb_endpoint_descriptor *endpoint; struct usb_descriptor_header *pDescHead; ULONG ulBufLen; ulBufLen = sizeof(ucData); memset(&ucData,0,sizeof(ucData)); int result, rc; int address, direction, transfer_type; DBG (5, "devname = %s, devcount = %d\n",devices[devcount].devname,devcount); DBG (5, "USBCalls device number to open = %d\n",devices[devcount].fd); DBG (5, "USBCalls Vendor/Product to open = 0x%04x/0x%04x\n", devices[devcount].vendor,devices[devcount].product); rc = UsbOpen (&dh, devices[devcount].vendor, devices[devcount].product, USB_ANY_PRODUCTVERSION, USB_OPEN_FIRST_UNUSED); DBG (1, "sanei_usb_open: UsbOpen rc = %d\n",rc); if (rc!=0) { SANE_Status status = SANE_STATUS_INVAL; DBG (1, "sanei_usb_open: can't open device `%s': %s\n", devname, strerror (rc)); return status; } rc = UsbQueryDeviceReport( devices[devcount].fd, &ulBufLen, ucData); DBG (1, "sanei_usb_open: UsbQueryDeviceReport rc = %d\n",rc); pDevDesc = (struct usb_device_descriptor*)ucData; pCfgDesc = (struct usb_config_descriptor*) (ucData+sizeof(struct usb_device_descriptor)); UCHAR *pCurPtr = (UCHAR*) pCfgDesc; UCHAR *pEndPtr = pCurPtr+ pCfgDesc->wTotalLength; pDescHead = (struct usb_descriptor_header *) (pCurPtr+pCfgDesc->bLength); /* Set the configuration */ if (pDevDesc->bNumConfigurations > 1) { DBG (3, "sanei_usb_open: more than one " "configuration (%d), choosing first config (%d)\n", pDevDesc->bNumConfigurations, pCfgDesc->bConfigurationValue); } DBG (5, "UsbDeviceSetConfiguration parameters: dh = %p, bConfigurationValue = %d\n", dh,pCfgDesc->bConfigurationValue); result = UsbDeviceSetConfiguration (dh, pCfgDesc->bConfigurationValue); DBG (1, "sanei_usb_open: UsbDeviceSetConfiguration rc = %d\n",result); if (result) { DBG (1, "sanei_usb_open: usbcalls complained on UsbDeviceSetConfiguration, rc= %d\n", result); UsbClose (dh); return SANE_STATUS_ACCESS_DENIED; } /* Now we look for usable endpoints */ for (pDescHead = (struct usb_descriptor_header *) (pCurPtr+pCfgDesc->bLength); pDescHead;pDescHead = GetNextDescriptor(pDescHead,pEndPtr) ) { switch(pDescHead->bDescriptorType) { case USB_DT_INTERFACE: interface = (struct usb_interface_descriptor *) pDescHead; DBG (5, "Found %d endpoints\n",interface->bNumEndpoints); DBG (5, "bAlternateSetting = %d\n",interface->bAlternateSetting); break; case USB_DT_ENDPOINT: endpoint = (struct usb_endpoint_descriptor*)pDescHead; direction = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; transfer_type = endpoint->bmAttributes & USB_ENDPOINT_TYPE_MASK; if (transfer_type == USB_ENDPOINT_TYPE_INTERRUPT || transfer_type == USB_ENDPOINT_TYPE_BULK) { sanei_usb_add_endpoint(&devices[devcount], transfer_type, endpoint->bEndpointAddress, direction); } /* ignore currently unsupported endpoints */ else { DBG (5, "sanei_usb_open: ignoring %s-%s endpoint " "(address: %d)\n", sanei_usb_transfer_type_desc(transfer_type), direction ? "in" : "out", address); continue; } break; } } #else DBG (1, "sanei_usb_open: can't open device `%s': " "usbcalls support missing\n", devname); return SANE_STATUS_UNSUPPORTED; #endif /* HAVE_USBCALLS */ } else { DBG (1, "sanei_usb_open: access method %d not implemented\n", devices[devcount].method); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_open(devcount); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } devices[devcount].open = SANE_TRUE; *dn = devcount; DBG (3, "sanei_usb_open: opened usb device `%s' (*dn=%d)\n", devname, devcount); return SANE_STATUS_GOOD; } void sanei_usb_close (SANE_Int dn) { char *env; int workaround = 0; DBG (5, "sanei_usb_close: evaluating environment variable SANE_USB_WORKAROUND\n"); env = getenv ("SANE_USB_WORKAROUND"); if (env) { workaround = atoi(env); DBG (5, "sanei_usb_close: workaround: %d\n", workaround); } DBG (5, "sanei_usb_close: closing device %d\n", dn); if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_close: dn >= device number || dn < 0\n"); return; } if (!devices[dn].open) { DBG (1, "sanei_usb_close: device %d already closed or never opened\n", dn); return; } if (testing_mode == sanei_usb_testing_mode_replay) { DBG (1, "sanei_usb_close: closing fake USB device\n"); } else if (devices[dn].method == sanei_usb_method_scanner_driver) close (devices[dn].fd); else if (devices[dn].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS int rc; rc=UsbClose (dh); DBG (5,"rc of UsbClose = %d\n",rc); #else DBG (1, "sanei_usb_close: usbcalls support missing\n"); #endif } else #ifdef HAVE_LIBUSB_LEGACY { /* This call seems to be required by Linux xhci driver * even though it should be a no-op. Without it, the * host or driver does not reset it's data toggle bit. * We intentionally ignore the return val */ if (workaround) { sanei_usb_set_altinterface (dn, devices[dn].alt_setting); } usb_release_interface (devices[dn].libusb_handle, devices[dn].interface_nr); usb_close (devices[dn].libusb_handle); } #elif defined(HAVE_LIBUSB) { /* This call seems to be required by Linux xhci driver * even though it should be a no-op. Without it, the * host or driver does not reset it's data toggle bit. * We intentionally ignore the return val */ if (workaround) { sanei_usb_set_altinterface (dn, devices[dn].alt_setting); } libusb_release_interface (devices[dn].lu_handle, devices[dn].interface_nr); libusb_close (devices[dn].lu_handle); } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ DBG (1, "sanei_usb_close: libusb support missing\n"); #endif devices[dn].open = SANE_FALSE; return; } void sanei_usb_set_timeout (SANE_Int __sane_unused__ timeout) { if (testing_mode == sanei_usb_testing_mode_replay) return; #if defined(HAVE_LIBUSB_LEGACY) || defined(HAVE_LIBUSB) libusb_timeout = timeout; #else DBG (1, "sanei_usb_set_timeout: libusb support missing\n"); #endif /* HAVE_LIBUSB_LEGACY || HAVE_LIBUSB */ } SANE_Status sanei_usb_clear_halt (SANE_Int dn) { char *env; int workaround = 0; DBG (5, "sanei_usb_clear_halt: evaluating environment variable SANE_USB_WORKAROUND\n"); env = getenv ("SANE_USB_WORKAROUND"); if (env) { workaround = atoi(env); DBG (5, "sanei_usb_clear_halt: workaround: %d\n", workaround); } if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_clear_halt: dn >= device number || dn < 0\n"); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_replay) return SANE_STATUS_GOOD; #ifdef HAVE_LIBUSB_LEGACY int ret; /* This call seems to be required by Linux xhci driver * even though it should be a no-op. Without it, the * host or driver does not send the clear to the device. * We intentionally ignore the return val */ if (workaround) { sanei_usb_set_altinterface (dn, devices[dn].alt_setting); } ret = usb_clear_halt (devices[dn].libusb_handle, devices[dn].bulk_in_ep); if (ret){ DBG (1, "sanei_usb_clear_halt: BULK_IN ret=%d\n", ret); return SANE_STATUS_INVAL; } ret = usb_clear_halt (devices[dn].libusb_handle, devices[dn].bulk_out_ep); if (ret){ DBG (1, "sanei_usb_clear_halt: BULK_OUT ret=%d\n", ret); return SANE_STATUS_INVAL; } #elif defined(HAVE_LIBUSB) int ret; /* This call seems to be required by Linux xhci driver * even though it should be a no-op. Without it, the * host or driver does not send the clear to the device. * We intentionally ignore the return val */ if (workaround) { sanei_usb_set_altinterface (dn, devices[dn].alt_setting); } ret = libusb_clear_halt (devices[dn].lu_handle, devices[dn].bulk_in_ep); if (ret){ DBG (1, "sanei_usb_clear_halt: BULK_IN ret=%d\n", ret); return SANE_STATUS_INVAL; } ret = libusb_clear_halt (devices[dn].lu_handle, devices[dn].bulk_out_ep); if (ret){ DBG (1, "sanei_usb_clear_halt: BULK_OUT ret=%d\n", ret); return SANE_STATUS_INVAL; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ DBG (1, "sanei_usb_clear_halt: libusb support missing\n"); #endif /* HAVE_LIBUSB_LEGACY || HAVE_LIBUSB */ return SANE_STATUS_GOOD; } SANE_Status sanei_usb_reset (SANE_Int __sane_unused__ dn) { if (testing_mode == sanei_usb_testing_mode_replay) return SANE_STATUS_GOOD; #ifdef HAVE_LIBUSB_LEGACY int ret; ret = usb_reset (devices[dn].libusb_handle); if (ret){ DBG (1, "sanei_usb_reset: ret=%d\n", ret); return SANE_STATUS_INVAL; } #elif defined(HAVE_LIBUSB) int ret; ret = libusb_reset_device (devices[dn].lu_handle); if (ret){ DBG (1, "sanei_usb_reset: ret=%d\n", ret); return SANE_STATUS_INVAL; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ DBG (1, "sanei_usb_reset: libusb support missing\n"); #endif /* HAVE_LIBUSB_LEGACY || HAVE_LIBUSB */ return SANE_STATUS_GOOD; } #if WITH_USB_RECORD_REPLAY // returns non-negative value on success, -1 on failure static int sanei_usb_replay_next_read_bulk_packet_size(SANE_Int dn) { xmlNode* node = sanei_xml_peek_next_tx_node(); if (node == NULL) return -1; if (xmlStrcmp(node->name, (const xmlChar*)"bulk_tx") != 0) { return -1; } if (!sanei_usb_attr_is(node, "direction", "IN")) return -1; if (!sanei_usb_attr_is_uint(node, "endpoint_number", devices[dn].bulk_in_ep & 0x0f)) return -1; size_t got_size = 0; char* got_data = sanei_xml_get_hex_data(node, &got_size); free(got_data); return got_size; } static void sanei_usb_record_read_bulk(xmlNode* node, SANE_Int dn, SANE_Byte* buffer, size_t size, ssize_t read_size) { int node_was_null = node == NULL; if (node_was_null) node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"bulk_tx"); sanei_xml_command_common_props(e_tx, devices[dn].bulk_in_ep & 0x0f, "IN"); if (buffer == NULL) { const int buf_size = 128; char buf[buf_size]; snprintf(buf, buf_size, "(unknown read of allowed size %ld)", size); xmlNode* e_content = xmlNewText((const xmlChar*)buf); xmlAddChild(e_tx, e_content); } else { if (read_size >= 0) { sanei_xml_set_hex_data(e_tx, (const char*)buffer, read_size); } else { xmlNewProp(e_tx, (const xmlChar*)"error", (const xmlChar*)"timeout"); } } node = sanei_xml_append_command(node, node_was_null, e_tx); if (node_was_null) testing_append_commands_node = node; } static void sanei_usb_record_replace_read_bulk(xmlNode* node, SANE_Int dn, SANE_Byte* buffer, size_t size, size_t read_size) { if (!testing_development_mode) return; testing_known_commands_input_failed = 1; testing_last_known_seq--; sanei_usb_record_read_bulk(node, dn, buffer, size, read_size); xmlUnlinkNode(node); xmlFreeNode(node); } static int sanei_usb_replay_read_bulk(SANE_Int dn, SANE_Byte* buffer, size_t size) { // libusb may potentially combine multiple IN packets into a single transfer. // We recontruct that by looking into the next packet. If it can be // included into the current transfer without size_t wanted_size = size; size_t total_got_size = 0; while (wanted_size > 0) { if (testing_known_commands_input_failed) return -1; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return -1; } if (sanei_xml_is_known_commands_end(node)) { sanei_usb_record_read_bulk(NULL, dn, NULL, 0, size); testing_known_commands_input_failed = 1; return -1; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"bulk_tx") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); sanei_usb_record_replace_read_bulk(node, dn, NULL, 0, wanted_size); return -1; } if (!sanei_usb_check_attr(node, "direction", "IN", __func__)) { sanei_usb_record_replace_read_bulk(node, dn, NULL, 0, wanted_size); return -1; } if (!sanei_usb_check_attr_uint(node, "endpoint_number", devices[dn].bulk_in_ep & 0x0f, __func__)) { sanei_usb_record_replace_read_bulk(node, dn, NULL, 0, wanted_size); return -1; } size_t got_size = 0; char* got_data = sanei_xml_get_hex_data(node, &got_size); if (got_size > wanted_size) { FAIL_TEST_TX(__func__, node, "got more data than wanted (%lu vs %lu)\n", got_size, wanted_size); free(got_data); sanei_usb_record_replace_read_bulk(node, dn, NULL, 0, wanted_size); return -1; } memcpy(buffer + total_got_size, got_data, got_size); free(got_data); total_got_size += got_size; wanted_size -= got_size; int next_size = sanei_usb_replay_next_read_bulk_packet_size(dn); if (next_size < 0) return total_got_size; if ((size_t) next_size > wanted_size) return total_got_size; } return total_got_size; } #endif // WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_read_bulk (SANE_Int dn, SANE_Byte * buffer, size_t * size) { ssize_t read_size = 0; if (!size) { DBG (1, "sanei_usb_read_bulk: size == NULL\n"); return SANE_STATUS_INVAL; } if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_read_bulk: dn >= device number || dn < 0\n"); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_read_bulk: trying to read %lu bytes\n", (unsigned long) *size); if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY read_size = sanei_usb_replay_read_bulk(dn, buffer, *size); #else DBG(1, "%s: USB record-replay mode support missing\n", __func__); return SANE_STATUS_UNSUPPORTED; #endif } else if (devices[dn].method == sanei_usb_method_scanner_driver) { read_size = read (devices[dn].fd, buffer, *size); if (read_size < 0) DBG (1, "sanei_usb_read_bulk: read failed: %s\n", strerror (errno)); } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { if (devices[dn].bulk_in_ep) { read_size = usb_bulk_read (devices[dn].libusb_handle, devices[dn].bulk_in_ep, (char *) buffer, (int) *size, libusb_timeout); if (read_size < 0) DBG (1, "sanei_usb_read_bulk: read failed: %s\n", strerror (errno)); } else { DBG (1, "sanei_usb_read_bulk: can't read without a bulk-in " "endpoint\n"); return SANE_STATUS_INVAL; } } #elif defined(HAVE_LIBUSB) { if (devices[dn].bulk_in_ep) { int ret, rsize; ret = libusb_bulk_transfer (devices[dn].lu_handle, devices[dn].bulk_in_ep, buffer, (int) *size, &rsize, libusb_timeout); if (ret < 0) { DBG (1, "sanei_usb_read_bulk: read failed (still got %d bytes): %s\n", rsize, sanei_libusb_strerror (ret)); read_size = -1; } else { read_size = rsize; } } else { DBG (1, "sanei_usb_read_bulk: can't read without a bulk-in " "endpoint\n"); return SANE_STATUS_INVAL; } } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_read_bulk: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY */ else if (devices[dn].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS int rc; char* buffer_ptr = (char*) buffer; size_t requested_size = *size; while (requested_size) { ULONG ulToRead = (requested_size>MAX_RW)?MAX_RW:requested_size; ULONG ulNum = ulToRead; DBG (5, "Entered usbcalls UsbBulkRead with dn = %d\n",dn); DBG (5, "Entered usbcalls UsbBulkRead with dh = %p\n",dh); DBG (5, "Entered usbcalls UsbBulkRead with bulk_in_ep = 0x%02x\n",devices[dn].bulk_in_ep); DBG (5, "Entered usbcalls UsbBulkRead with interface_nr = %d\n",devices[dn].interface_nr); DBG (5, "Entered usbcalls UsbBulkRead with usbcalls_timeout = %d\n",usbcalls_timeout); if (devices[dn].bulk_in_ep){ rc = UsbBulkRead (dh, devices[dn].bulk_in_ep, devices[dn].interface_nr, &ulToRead, buffer_ptr, usbcalls_timeout); DBG (1, "sanei_usb_read_bulk: rc = %d\n",rc);} else { DBG (1, "sanei_usb_read_bulk: can't read without a bulk-in endpoint\n"); return SANE_STATUS_INVAL; } if (rc || (ulNum!=ulToRead)) return SANE_STATUS_INVAL; requested_size -=ulToRead; buffer_ptr += ulToRead; read_size += ulToRead; } #else /* not HAVE_USBCALLS */ { DBG (1, "sanei_usb_read_bulk: usbcalls support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_USBCALLS */ } else { DBG (1, "sanei_usb_read_bulk: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_read_bulk(NULL, dn, buffer, *size, read_size); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } if (read_size < 0) { *size = 0; if (testing_mode != sanei_usb_testing_mode_disabled) return SANE_STATUS_IO_ERROR; #ifdef HAVE_LIBUSB_LEGACY if (devices[dn].method == sanei_usb_method_libusb) usb_clear_halt (devices[dn].libusb_handle, devices[dn].bulk_in_ep); #elif defined(HAVE_LIBUSB) if (devices[dn].method == sanei_usb_method_libusb) libusb_clear_halt (devices[dn].lu_handle, devices[dn].bulk_in_ep); #endif return SANE_STATUS_IO_ERROR; } if (read_size == 0) { DBG (3, "sanei_usb_read_bulk: read returned EOF\n"); *size = 0; return SANE_STATUS_EOF; } if (debug_level > 10) print_buffer (buffer, read_size); DBG (5, "sanei_usb_read_bulk: wanted %lu bytes, got %ld bytes\n", (unsigned long) *size, (unsigned long) read_size); *size = read_size; return SANE_STATUS_GOOD; } #if WITH_USB_RECORD_REPLAY static int sanei_usb_record_write_bulk(xmlNode* node, SANE_Int dn, const SANE_Byte* buffer, size_t size, size_t write_size) { int node_was_null = node == NULL; if (node_was_null) node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"bulk_tx"); sanei_xml_command_common_props(e_tx, devices[dn].bulk_out_ep & 0x0f, "OUT"); sanei_xml_set_hex_data(e_tx, (const char*)buffer, size); // FIXME: output write_size node = sanei_xml_append_command(node, node_was_null, e_tx); if (node_was_null) testing_append_commands_node = node; return write_size; } static void sanei_usb_record_replace_write_bulk(xmlNode* node, SANE_Int dn, const SANE_Byte* buffer, size_t size, size_t write_size) { if (!testing_development_mode) return; testing_last_known_seq--; sanei_usb_record_write_bulk(node, dn, buffer, size, write_size); xmlUnlinkNode(node); xmlFreeNode(node); } // returns non-negative value on success, -1 on failure static int sanei_usb_replay_next_write_bulk_packet_size(SANE_Int dn) { xmlNode* node = sanei_xml_peek_next_tx_node(); if (node == NULL) return -1; if (xmlStrcmp(node->name, (const xmlChar*)"bulk_tx") != 0) { return -1; } if (!sanei_usb_attr_is(node, "direction", "OUT")) return -1; if (!sanei_usb_attr_is_uint(node, "endpoint_number", devices[dn].bulk_out_ep & 0x0f)) return -1; size_t got_size = 0; char* got_data = sanei_xml_get_hex_data(node, &got_size); free(got_data); return got_size; } static int sanei_usb_replay_write_bulk(SANE_Int dn, const SANE_Byte* buffer, size_t size) { size_t wanted_size = size; size_t total_wrote_size = 0; while (wanted_size > 0) { if (testing_known_commands_input_failed) return -1; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return -1; } if (sanei_xml_is_known_commands_end(node)) { sanei_usb_record_write_bulk(NULL, dn, buffer, size, size); return size; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"bulk_tx") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); return -1; } if (!sanei_usb_check_attr(node, "direction", "OUT", __func__)) { sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); return -1; } if (!sanei_usb_check_attr_uint(node, "endpoint_number", devices[dn].bulk_out_ep & 0x0f, __func__)) { sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); return -1; } size_t wrote_size = 0; char* wrote_data = sanei_xml_get_hex_data(node, &wrote_size); if (wrote_size > wanted_size) { FAIL_TEST_TX(__func__, node, "wrote more data than wanted (%lu vs %lu)\n", wrote_size, wanted_size); if (!testing_development_mode) { free(wrote_data); return -1; } sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); wrote_size = size; } else if (!sanei_usb_check_data_equal(node, ((const char*) buffer) + total_wrote_size, wrote_size, wrote_data, wrote_size, __func__)) { if (!testing_development_mode) { free(wrote_data); return -1; } sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); wrote_size = size; } free(wrote_data); if (wrote_size < wanted_size && sanei_usb_replay_next_write_bulk_packet_size(dn) < 0) { FAIL_TEST_TX(__func__, node, "wrote less data than wanted (%lu vs %lu)\n", wrote_size, wanted_size); if (!testing_development_mode) { return -1; } sanei_usb_record_replace_write_bulk(node, dn, buffer, size, size); wrote_size = size; } total_wrote_size += wrote_size; wanted_size -= wrote_size; } return total_wrote_size; } #endif SANE_Status sanei_usb_write_bulk (SANE_Int dn, const SANE_Byte * buffer, size_t * size) { ssize_t write_size = 0; if (!size) { DBG (1, "sanei_usb_write_bulk: size == NULL\n"); return SANE_STATUS_INVAL; } if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_write_bulk: dn >= device number || dn < 0\n"); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_write_bulk: trying to write %lu bytes\n", (unsigned long) *size); if (debug_level > 10) print_buffer (buffer, *size); if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY write_size = sanei_usb_replay_write_bulk(dn, buffer, *size); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } else if (devices[dn].method == sanei_usb_method_scanner_driver) { write_size = write (devices[dn].fd, buffer, *size); if (write_size < 0) DBG (1, "sanei_usb_write_bulk: write failed: %s\n", strerror (errno)); } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { if (devices[dn].bulk_out_ep) { write_size = usb_bulk_write (devices[dn].libusb_handle, devices[dn].bulk_out_ep, (const char *) buffer, (int) *size, libusb_timeout); if (write_size < 0) DBG (1, "sanei_usb_write_bulk: write failed: %s\n", strerror (errno)); } else { DBG (1, "sanei_usb_write_bulk: can't write without a bulk-out " "endpoint\n"); return SANE_STATUS_INVAL; } } #elif defined(HAVE_LIBUSB) { if (devices[dn].bulk_out_ep) { int ret; int trans_bytes; ret = libusb_bulk_transfer (devices[dn].lu_handle, devices[dn].bulk_out_ep, (unsigned char *) buffer, (int) *size, &trans_bytes, libusb_timeout); if (ret < 0) { DBG (1, "sanei_usb_write_bulk: write failed: %s\n", sanei_libusb_strerror (ret)); write_size = -1; } else write_size = trans_bytes; } else { DBG (1, "sanei_usb_write_bulk: can't write without a bulk-out " "endpoint\n"); return SANE_STATUS_INVAL; } } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_write_bulk: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else if (devices[dn].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS int rc; DBG (5, "Entered usbcalls UsbBulkWrite with dn = %d\n",dn); DBG (5, "Entered usbcalls UsbBulkWrite with dh = %p\n",dh); DBG (5, "Entered usbcalls UsbBulkWrite with bulk_out_ep = 0x%02x\n",devices[dn].bulk_out_ep); DBG (5, "Entered usbcalls UsbBulkWrite with interface_nr = %d\n",devices[dn].interface_nr); DBG (5, "Entered usbcalls UsbBulkWrite with usbcalls_timeout = %d\n",usbcalls_timeout); size_t requested_size = *size; while (requested_size) { ULONG ulToWrite = (requested_size>MAX_RW)?MAX_RW:requested_size; DBG (5, "size requested to write = %lu, ulToWrite = %lu\n",(unsigned long) requested_size,ulToWrite); if (devices[dn].bulk_out_ep){ rc = UsbBulkWrite (dh, devices[dn].bulk_out_ep, devices[dn].interface_nr, ulToWrite, (char*) buffer, usbcalls_timeout); DBG (1, "sanei_usb_write_bulk: rc = %d\n",rc); } else { DBG (1, "sanei_usb_write_bulk: can't read without a bulk-out endpoint\n"); return SANE_STATUS_INVAL; } if (rc) return SANE_STATUS_INVAL; requested_size -=ulToWrite; buffer += ulToWrite; write_size += ulToWrite; DBG (5, "size = %d, write_size = %d\n", requested_size, write_size); } #else /* not HAVE_USBCALLS */ { DBG (1, "sanei_usb_write_bulk: usbcalls support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_USBCALLS */ } else { DBG (1, "sanei_usb_write_bulk: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_write_bulk(NULL, dn, buffer, *size, write_size); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } if (write_size < 0) { *size = 0; if (testing_mode != sanei_usb_testing_mode_disabled) return SANE_STATUS_IO_ERROR; #ifdef HAVE_LIBUSB_LEGACY if (devices[dn].method == sanei_usb_method_libusb) usb_clear_halt (devices[dn].libusb_handle, devices[dn].bulk_out_ep); #elif defined(HAVE_LIBUSB) if (devices[dn].method == sanei_usb_method_libusb) libusb_clear_halt (devices[dn].lu_handle, devices[dn].bulk_out_ep); #endif return SANE_STATUS_IO_ERROR; } DBG (5, "sanei_usb_write_bulk: wanted %lu bytes, wrote %ld bytes\n", (unsigned long) *size, (unsigned long) write_size); *size = write_size; return SANE_STATUS_GOOD; } #if WITH_USB_RECORD_REPLAY static void sanei_usb_record_control_msg(xmlNode* node, SANE_Int dn, SANE_Int rtype, SANE_Int req, SANE_Int value, SANE_Int index, SANE_Int len, const SANE_Byte* data) { (void) dn; int node_was_null = node == NULL; if (node_was_null) node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"control_tx"); int direction_is_in = (rtype & 0x80) == 0x80; sanei_xml_command_common_props(e_tx, rtype & 0x1f, direction_is_in ? "IN" : "OUT"); sanei_xml_set_hex_attr(e_tx, "bmRequestType", rtype); sanei_xml_set_hex_attr(e_tx, "bRequest", req); sanei_xml_set_hex_attr(e_tx, "wValue", value); sanei_xml_set_hex_attr(e_tx, "wIndex", index); sanei_xml_set_hex_attr(e_tx, "wLength", len); if (direction_is_in && data == NULL) { const int buf_size = 128; char buf[buf_size]; snprintf(buf, buf_size, "(unknown read of size %d)", len); xmlNode* e_content = xmlNewText((const xmlChar*)buf); xmlAddChild(e_tx, e_content); } else { sanei_xml_set_hex_data(e_tx, (const char*)data, len); } node = sanei_xml_append_command(node, node_was_null, e_tx); if (node_was_null) testing_append_commands_node = node; } static SANE_Status sanei_usb_record_replace_control_msg(xmlNode* node, SANE_Int dn, SANE_Int rtype, SANE_Int req, SANE_Int value, SANE_Int index, SANE_Int len, const SANE_Byte* data) { if (!testing_development_mode) return SANE_STATUS_IO_ERROR; SANE_Status ret = SANE_STATUS_GOOD; int direction_is_in = (rtype & 0x80) == 0x80; if (direction_is_in) { testing_known_commands_input_failed = 1; ret = SANE_STATUS_IO_ERROR; } testing_last_known_seq--; sanei_usb_record_control_msg(node, dn, rtype, req, value, index, len, data); xmlUnlinkNode(node); xmlFreeNode(node); return ret; } static SANE_Status sanei_usb_replay_control_msg(SANE_Int dn, SANE_Int rtype, SANE_Int req, SANE_Int value, SANE_Int index, SANE_Int len, SANE_Byte* data) { (void) dn; if (testing_known_commands_input_failed) return SANE_STATUS_IO_ERROR; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return SANE_STATUS_IO_ERROR; } int direction_is_in = (rtype & 0x80) == 0x80; SANE_Byte* rdata = direction_is_in ? NULL : data; if (sanei_xml_is_known_commands_end(node)) { sanei_usb_record_control_msg(NULL, dn, rtype, req, value, index, len, rdata); if (direction_is_in) { testing_known_commands_input_failed = 1; return SANE_STATUS_IO_ERROR; } return SANE_STATUS_GOOD; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"control_tx") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); return sanei_usb_record_replace_control_msg(node, dn, rtype, req, value, index, len, rdata); } if (!sanei_usb_check_attr(node, "direction", direction_is_in ? "IN" : "OUT", __func__) || !sanei_usb_check_attr_uint(node, "bmRequestType", rtype, __func__) || !sanei_usb_check_attr_uint(node, "bRequest", req, __func__) || !sanei_usb_check_attr_uint(node, "wValue", value, __func__) || !sanei_usb_check_attr_uint(node, "wIndex", index, __func__) || !sanei_usb_check_attr_uint(node, "wLength", len, __func__)) { return sanei_usb_record_replace_control_msg(node, dn, rtype, req, value, index, len, rdata); } size_t tx_data_size = 0; char* tx_data = sanei_xml_get_hex_data(node, &tx_data_size); if (direction_is_in) { if (tx_data_size != (size_t)len) { FAIL_TEST_TX(__func__, node, "got different amount of data than wanted (%lu vs %lu)\n", tx_data_size, (size_t)len); free(tx_data); return sanei_usb_record_replace_control_msg(node, dn, rtype, req, value, index, len, rdata); } memcpy(data, tx_data, tx_data_size); } else { if (!sanei_usb_check_data_equal(node, (const char*)data, len, tx_data, tx_data_size, __func__)) { free(tx_data); return sanei_usb_record_replace_control_msg(node, dn, rtype, req, value, index, len, rdata); } } free(tx_data); return SANE_STATUS_GOOD; } #endif SANE_Status sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, SANE_Int value, SANE_Int index, SANE_Int len, SANE_Byte * data) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_control_msg: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_control_msg: rtype = 0x%02x, req = %d, value = %d, " "index = %d, len = %d\n", rtype, req, value, index, len); if (!(rtype & 0x80) && debug_level > 10) print_buffer (data, len); if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY return sanei_usb_replay_control_msg(dn, rtype, req, value, index, len, data); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } if (devices[dn].method == sanei_usb_method_scanner_driver) { #if defined(__linux__) struct ctrlmsg_ioctl c; c.req.requesttype = rtype; c.req.request = req; c.req.value = value; c.req.index = index; c.req.length = len; c.data = data; if (ioctl (devices[dn].fd, SCANNER_IOCTL_CTRLMSG, &c) < 0) { DBG (5, "sanei_usb_control_msg: SCANNER_IOCTL_CTRLMSG error - %s\n", strerror (errno)); return SANE_STATUS_IO_ERROR; } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); #elif defined(__BEOS__) struct usb_scanner_ioctl_ctrlmsg c; c.req.request_type = rtype; c.req.request = req; c.req.value = value; c.req.index = index; c.req.length = len; c.data = data; if (ioctl (devices[dn].fd, B_SCANNER_IOCTL_CTRLMSG, &c) < 0) { DBG (5, "sanei_usb_control_msg: SCANNER_IOCTL_CTRLMSG error - %s\n", strerror (errno)); return SANE_STATUS_IO_ERROR; } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); #else /* not __linux__ */ DBG (5, "sanei_usb_control_msg: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; #endif /* not __linux__ */ } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { int result; result = usb_control_msg (devices[dn].libusb_handle, rtype, req, value, index, (char *) data, len, libusb_timeout); if (result < 0) { DBG (1, "sanei_usb_control_msg: libusb complained: %s\n", usb_strerror ()); return SANE_STATUS_INVAL; } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); } #elif defined(HAVE_LIBUSB) { int result; result = libusb_control_transfer (devices[dn].lu_handle, rtype, req, value, index, data, len, libusb_timeout); if (result < 0) { DBG (1, "sanei_usb_control_msg: libusb complained: %s\n", sanei_libusb_strerror (result)); return SANE_STATUS_INVAL; } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB*/ { DBG (1, "sanei_usb_control_msg: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else if (devices[dn].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS int result; result = UsbCtrlMessage (dh, rtype, req, value, index, len, (char *) data, usbcalls_timeout); DBG (5, "rc of usb_control_msg = %d\n",result); if (result < 0) { DBG (1, "sanei_usb_control_msg: usbcalls complained: %d\n",result); return SANE_STATUS_INVAL; } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); #else /* not HAVE_USBCALLS */ { DBG (1, "sanei_usb_control_msg: usbcalls support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_USBCALLS */ } else { DBG (1, "sanei_usb_control_msg: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_UNSUPPORTED; } if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY // TODO: record in the error code path too sanei_usb_record_control_msg(NULL, dn, rtype, req, value, index, len, data); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } return SANE_STATUS_GOOD; } #if WITH_USB_RECORD_REPLAY static void sanei_usb_record_read_int(xmlNode* node, SANE_Int dn, SANE_Byte* buffer, size_t size, ssize_t read_size) { (void) size; int node_was_null = node == NULL; if (node_was_null) node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"interrupt_tx"); sanei_xml_command_common_props(e_tx, devices[dn].int_in_ep & 0x0f, "IN"); if (buffer == NULL) { const int buf_size = 128; char buf[buf_size]; snprintf(buf, buf_size, "(unknown read of wanted size %ld)", read_size); xmlNode* e_content = xmlNewText((const xmlChar*)buf); xmlAddChild(e_tx, e_content); } else { if (read_size >= 0) { sanei_xml_set_hex_data(e_tx, (const char*)buffer, read_size); } else { xmlNewProp(e_tx, (const xmlChar*)"error", (const xmlChar*)"timeout"); } } node = sanei_xml_append_command(node, node_was_null, e_tx); if (node_was_null) testing_append_commands_node = node; } static void sanei_usb_record_replace_read_int(xmlNode* node, SANE_Int dn, SANE_Byte* buffer, size_t size, size_t read_size) { if (!testing_development_mode) return; testing_known_commands_input_failed = 1; testing_last_known_seq--; sanei_usb_record_read_int(node, dn, buffer, size, read_size); xmlUnlinkNode(node); xmlFreeNode(node); } static int sanei_usb_replay_read_int(SANE_Int dn, SANE_Byte* buffer, size_t size) { if (testing_known_commands_input_failed) return -1; size_t wanted_size = size; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return -1; } if (sanei_xml_is_known_commands_end(node)) { sanei_usb_record_read_int(NULL, dn, NULL, 0, size); testing_known_commands_input_failed = 1; return -1; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"interrupt_tx") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); sanei_usb_record_replace_read_int(node, dn, NULL, 0, size); return -1; } if (!sanei_usb_check_attr(node, "direction", "IN", __func__)) { sanei_usb_record_replace_read_int(node, dn, NULL, 0, size); return -1; } if (!sanei_usb_check_attr_uint(node, "endpoint_number", devices[dn].int_in_ep & 0x0f, __func__)) { sanei_usb_record_replace_read_int(node, dn, NULL, 0, size); return -1; } if (sanei_usb_check_attr(node, "error", "timeout", __func__)) { return -1; } size_t tx_data_size = 0; char* tx_data = sanei_xml_get_hex_data(node, &tx_data_size); if (tx_data_size > wanted_size) { FAIL_TEST_TX(__func__, node, "got more data than wanted (%lu vs %lu)\n", tx_data_size, wanted_size); sanei_usb_record_replace_read_int(node, dn, NULL, 0, size); free(tx_data); return -1; } memcpy((char*) buffer, tx_data, tx_data_size); free(tx_data); return tx_data_size; } #endif // WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_read_int (SANE_Int dn, SANE_Byte * buffer, size_t * size) { ssize_t read_size = 0; #if defined(HAVE_LIBUSB_LEGACY) || defined(HAVE_LIBUSB) SANE_Bool stalled = SANE_FALSE; #endif if (!size) { DBG (1, "sanei_usb_read_int: size == NULL\n"); return SANE_STATUS_INVAL; } if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_read_int: dn >= device number || dn < 0\n"); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_read_int: trying to read %lu bytes\n", (unsigned long) *size); if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY read_size = sanei_usb_replay_read_int(dn, buffer, *size); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } else if (devices[dn].method == sanei_usb_method_scanner_driver) { DBG (1, "sanei_usb_read_int: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_INVAL; } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { if (devices[dn].int_in_ep) { read_size = usb_interrupt_read (devices[dn].libusb_handle, devices[dn].int_in_ep, (char *) buffer, (int) *size, libusb_timeout); if (read_size < 0) DBG (1, "sanei_usb_read_int: read failed: %s\n", strerror (errno)); stalled = (read_size == -EPIPE); } else { DBG (1, "sanei_usb_read_int: can't read without an int " "endpoint\n"); return SANE_STATUS_INVAL; } } #elif defined(HAVE_LIBUSB) { if (devices[dn].int_in_ep) { int ret; int trans_bytes; ret = libusb_interrupt_transfer (devices[dn].lu_handle, devices[dn].int_in_ep, buffer, (int) *size, &trans_bytes, libusb_timeout); if (ret < 0) read_size = -1; else read_size = trans_bytes; stalled = (ret == LIBUSB_ERROR_PIPE); } else { DBG (1, "sanei_usb_read_int: can't read without an int " "endpoint\n"); return SANE_STATUS_INVAL; } } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_read_int: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else if (devices[dn].method == sanei_usb_method_usbcalls) { #ifdef HAVE_USBCALLS int rc; USHORT usNumBytes=*size; DBG (5, "Entered usbcalls UsbIrqStart with dn = %d\n",dn); DBG (5, "Entered usbcalls UsbIrqStart with dh = %p\n",dh); DBG (5, "Entered usbcalls UsbIrqStart with int_in_ep = 0x%02x\n",devices[dn].int_in_ep); DBG (5, "Entered usbcalls UsbIrqStart with interface_nr = %d\n",devices[dn].interface_nr); DBG (5, "Entered usbcalls UsbIrqStart with bytes to read = %u\n",usNumBytes); if (devices[dn].int_in_ep){ rc = UsbIrqStart (dh,devices[dn].int_in_ep,devices[dn].interface_nr, usNumBytes, (char *) buffer, pUsbIrqStartHev); DBG (5, "rc of UsbIrqStart = %d\n",rc); } else { DBG (1, "sanei_usb_read_int: can't read without an int " "endpoint\n"); return SANE_STATUS_INVAL; } if (rc) return SANE_STATUS_INVAL; read_size += usNumBytes; #else DBG (1, "sanei_usb_read_int: usbcalls support missing\n"); return SANE_STATUS_UNSUPPORTED; #endif /* HAVE_USBCALLS */ } else { DBG (1, "sanei_usb_read_int: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_read_int(NULL, dn, buffer, *size, read_size); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } if (read_size < 0) { *size = 0; if (testing_mode != sanei_usb_testing_mode_disabled) return SANE_STATUS_IO_ERROR; #ifdef HAVE_LIBUSB_LEGACY if (devices[dn].method == sanei_usb_method_libusb) if (stalled) usb_clear_halt (devices[dn].libusb_handle, devices[dn].int_in_ep); #elif defined(HAVE_LIBUSB) if (devices[dn].method == sanei_usb_method_libusb) if (stalled) libusb_clear_halt (devices[dn].lu_handle, devices[dn].int_in_ep); #endif return SANE_STATUS_IO_ERROR; } if (read_size == 0) { DBG (3, "sanei_usb_read_int: read returned EOF\n"); *size = 0; return SANE_STATUS_EOF; } DBG (5, "sanei_usb_read_int: wanted %lu bytes, got %ld bytes\n", (unsigned long) *size, (unsigned long) read_size); *size = read_size; if (debug_level > 10) print_buffer (buffer, read_size); return SANE_STATUS_GOOD; } #if WITH_USB_RECORD_REPLAY static SANE_Status sanei_usb_replay_set_configuration(SANE_Int dn, SANE_Int configuration) { (void) dn; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return SANE_STATUS_IO_ERROR; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"control_tx") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); return SANE_STATUS_IO_ERROR; } if (!sanei_usb_check_attr(node, "direction", "OUT", __func__)) return SANE_STATUS_IO_ERROR; if (!sanei_usb_check_attr_uint(node, "bmRequestType", 0, __func__)) return SANE_STATUS_IO_ERROR; if (!sanei_usb_check_attr_uint(node, "bRequest", 9, __func__)) return SANE_STATUS_IO_ERROR; if (!sanei_usb_check_attr_uint(node, "wValue", configuration, __func__)) return SANE_STATUS_IO_ERROR; if (!sanei_usb_check_attr_uint(node, "wIndex", 0, __func__)) return SANE_STATUS_IO_ERROR; if (!sanei_usb_check_attr_uint(node, "wLength", 0, __func__)) return SANE_STATUS_IO_ERROR; return SANE_STATUS_GOOD; } static void sanei_usb_record_set_configuration(SANE_Int dn, SANE_Int configuration) { (void) dn; (void) configuration; // TODO } #endif // WITH_USB_RECORD_REPLAY SANE_Status sanei_usb_set_configuration (SANE_Int dn, SANE_Int configuration) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_set_configuration: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_set_configuration: configuration = %d\n", configuration); if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_set_configuration(dn, configuration); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY return sanei_usb_replay_set_configuration(dn, configuration); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } else if (devices[dn].method == sanei_usb_method_scanner_driver) { #if defined(__linux__) return SANE_STATUS_GOOD; #else /* not __linux__ */ DBG (5, "sanei_usb_set_configuration: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; #endif /* not __linux__ */ } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { int result; result = usb_set_configuration (devices[dn].libusb_handle, configuration); if (result < 0) { DBG (1, "sanei_usb_set_configuration: libusb complained: %s\n", usb_strerror ()); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { int result; result = libusb_set_configuration (devices[dn].lu_handle, configuration); if (result < 0) { DBG (1, "sanei_usb_set_configuration: libusb complained: %s\n", sanei_libusb_strerror (result)); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_set_configuration: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else { DBG (1, "sanei_usb_set_configuration: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_UNSUPPORTED; } } SANE_Status sanei_usb_claim_interface (SANE_Int dn, SANE_Int interface_number) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_claim_interface: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } if (devices[dn].missing) { DBG (1, "sanei_usb_claim_interface: device dn=%d is missing\n", dn); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_claim_interface: interface_number = %d\n", interface_number); if (testing_mode == sanei_usb_testing_mode_replay) { return SANE_STATUS_GOOD; } else if (devices[dn].method == sanei_usb_method_scanner_driver) { #if defined(__linux__) return SANE_STATUS_GOOD; #else /* not __linux__ */ DBG (5, "sanei_usb_claim_interface: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; #endif /* not __linux__ */ } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { int result; result = usb_claim_interface (devices[dn].libusb_handle, interface_number); if (result < 0) { DBG (1, "sanei_usb_claim_interface: libusb complained: %s\n", usb_strerror ()); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { int result; result = libusb_claim_interface (devices[dn].lu_handle, interface_number); if (result < 0) { DBG (1, "sanei_usb_claim_interface: libusb complained: %s\n", sanei_libusb_strerror (result)); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_claim_interface: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else { DBG (1, "sanei_usb_claim_interface: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_UNSUPPORTED; } } SANE_Status sanei_usb_release_interface (SANE_Int dn, SANE_Int interface_number) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_release_interface: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } if (devices[dn].missing) { DBG (1, "sanei_usb_release_interface: device dn=%d is missing\n", dn); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_release_interface: interface_number = %d\n", interface_number); if (testing_mode == sanei_usb_testing_mode_replay) { return SANE_STATUS_GOOD; } else if (devices[dn].method == sanei_usb_method_scanner_driver) { #if defined(__linux__) return SANE_STATUS_GOOD; #else /* not __linux__ */ DBG (5, "sanei_usb_release_interface: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; #endif /* not __linux__ */ } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { int result; result = usb_release_interface (devices[dn].libusb_handle, interface_number); if (result < 0) { DBG (1, "sanei_usb_release_interface: libusb complained: %s\n", usb_strerror ()); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { int result; result = libusb_release_interface (devices[dn].lu_handle, interface_number); if (result < 0) { DBG (1, "sanei_usb_release_interface: libusb complained: %s\n", sanei_libusb_strerror (result)); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_release_interface: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else { DBG (1, "sanei_usb_release_interface: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_UNSUPPORTED; } } SANE_Status sanei_usb_set_altinterface (SANE_Int dn, SANE_Int alternate) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_set_altinterface: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } DBG (5, "sanei_usb_set_altinterface: alternate = %d\n", alternate); devices[dn].alt_setting = alternate; if (testing_mode == sanei_usb_testing_mode_replay) { return SANE_STATUS_GOOD; } else if (devices[dn].method == sanei_usb_method_scanner_driver) { #if defined(__linux__) return SANE_STATUS_GOOD; #else /* not __linux__ */ DBG (5, "sanei_usb_set_altinterface: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; #endif /* not __linux__ */ } else if (devices[dn].method == sanei_usb_method_libusb) #ifdef HAVE_LIBUSB_LEGACY { int result; result = usb_set_altinterface (devices[dn].libusb_handle, alternate); if (result < 0) { DBG (1, "sanei_usb_set_altinterface: libusb complained: %s\n", usb_strerror ()); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { int result; result = libusb_set_interface_alt_setting (devices[dn].lu_handle, devices[dn].interface_nr, alternate); if (result < 0) { DBG (1, "sanei_usb_set_altinterface: libusb complained: %s\n", sanei_libusb_strerror (result)); return SANE_STATUS_INVAL; } return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_set_altinterface: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ else { DBG (1, "sanei_usb_set_altinterface: access method %d not implemented\n", devices[dn].method); return SANE_STATUS_UNSUPPORTED; } } #if WITH_USB_RECORD_REPLAY static SANE_Status sanei_usb_replay_get_descriptor(SANE_Int dn, struct sanei_usb_dev_descriptor *desc) { (void) dn; if (testing_known_commands_input_failed) return SANE_STATUS_IO_ERROR; xmlNode* node = sanei_xml_get_next_tx_node(); if (node == NULL) { FAIL_TEST(__func__, "no more transactions\n"); return SANE_STATUS_IO_ERROR; } if (sanei_xml_is_known_commands_end(node)) { testing_known_commands_input_failed = 1; return SANE_STATUS_IO_ERROR; } sanei_xml_record_seq(node); sanei_xml_break_if_needed(node); if (xmlStrcmp(node->name, (const xmlChar*)"get_descriptor") != 0) { FAIL_TEST_TX(__func__, node, "unexpected transaction type %s\n", (const char*) node->name); testing_known_commands_input_failed = 1; return SANE_STATUS_IO_ERROR; } int desc_type = sanei_xml_get_prop_uint(node, "descriptor_type"); int bcd_usb = sanei_xml_get_prop_uint(node, "bcd_usb"); int bcd_dev = sanei_xml_get_prop_uint(node, "bcd_device"); int dev_class = sanei_xml_get_prop_uint(node, "device_class"); int dev_sub_class = sanei_xml_get_prop_uint(node, "device_sub_class"); int dev_protocol = sanei_xml_get_prop_uint(node, "device_protocol"); int max_packet_size = sanei_xml_get_prop_uint(node, "max_packet_size"); if (desc_type < 0 || bcd_usb < 0 || bcd_dev < 0 || dev_class < 0 || dev_sub_class < 0 || dev_protocol < 0 || max_packet_size < 0) { FAIL_TEST_TX(__func__, node, "get_descriptor recorded block is missing attributes\n"); testing_known_commands_input_failed = 1; return SANE_STATUS_IO_ERROR; } desc->desc_type = desc_type; desc->bcd_usb = bcd_usb; desc->bcd_dev = bcd_dev; desc->dev_class = dev_class; desc->dev_sub_class = dev_sub_class; desc->dev_protocol = dev_protocol; desc->max_packet_size = max_packet_size; return SANE_STATUS_GOOD; } static void sanei_usb_record_get_descriptor(SANE_Int dn, struct sanei_usb_dev_descriptor *desc) { (void) dn; xmlNode* node = testing_append_commands_node; xmlNode* e_tx = xmlNewNode(NULL, (const xmlChar*)"get_descriptor"); xmlNewProp(e_tx, (const xmlChar*)"time_usec", (const xmlChar*)"0"); sanei_xml_set_uint_attr(node, "seq", ++testing_last_known_seq); sanei_xml_set_hex_attr(e_tx, "descriptor_type", desc->desc_type); sanei_xml_set_hex_attr(e_tx, "bcd_usb", desc->bcd_usb); sanei_xml_set_hex_attr(e_tx, "bcd_device", desc->bcd_dev); sanei_xml_set_hex_attr(e_tx, "device_class", desc->dev_class); sanei_xml_set_hex_attr(e_tx, "device_sub_class", desc->dev_sub_class); sanei_xml_set_hex_attr(e_tx, "device_protocol", desc->dev_protocol); sanei_xml_set_hex_attr(e_tx, "max_packet_size", desc->max_packet_size); node = sanei_xml_append_command(node, 1, e_tx); testing_append_commands_node = node; } #endif // WITH_USB_RECORD_REPLAY extern SANE_Status sanei_usb_get_descriptor( SANE_Int dn, struct sanei_usb_dev_descriptor __sane_unused__ *desc ) { if (dn >= device_number || dn < 0) { DBG (1, "sanei_usb_get_descriptor: dn >= device number || dn < 0, dn=%d\n", dn); return SANE_STATUS_INVAL; } if (testing_mode == sanei_usb_testing_mode_replay) { #if WITH_USB_RECORD_REPLAY return sanei_usb_replay_get_descriptor(dn, desc); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } DBG (5, "sanei_usb_get_descriptor\n"); #ifdef HAVE_LIBUSB_LEGACY { struct usb_device_descriptor *usb_descr; usb_descr = &(devices[dn].libusb_device->descriptor); desc->desc_type = usb_descr->bDescriptorType; desc->bcd_usb = usb_descr->bcdUSB; desc->bcd_dev = usb_descr->bcdDevice; desc->dev_class = usb_descr->bDeviceClass; desc->dev_sub_class = usb_descr->bDeviceSubClass; desc->dev_protocol = usb_descr->bDeviceProtocol; desc->max_packet_size = usb_descr->bMaxPacketSize0; } #elif defined(HAVE_LIBUSB) { struct libusb_device_descriptor lu_desc; int ret; ret = libusb_get_device_descriptor (devices[dn].lu_device, &lu_desc); if (ret < 0) { DBG (1, "sanei_usb_get_descriptor: libusb error: %s\n", sanei_libusb_strerror (ret)); return SANE_STATUS_INVAL; } desc->desc_type = lu_desc.bDescriptorType; desc->bcd_usb = lu_desc.bcdUSB; desc->bcd_dev = lu_desc.bcdDevice; desc->dev_class = lu_desc.bDeviceClass; desc->dev_sub_class = lu_desc.bDeviceSubClass; desc->dev_protocol = lu_desc.bDeviceProtocol; desc->max_packet_size = lu_desc.bMaxPacketSize0; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { DBG (1, "sanei_usb_get_descriptor: libusb support missing\n"); return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ if (testing_mode == sanei_usb_testing_mode_record) { #if WITH_USB_RECORD_REPLAY sanei_usb_record_get_descriptor(dn, desc); #else DBG (1, "USB record-replay mode support is missing\n"); return SANE_STATUS_UNSUPPORTED; #endif } return SANE_STATUS_GOOD; }