The following table summarizes the devices supported by the latest version of sane-backends.
This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.
If you have new information or corrections, please file a bug report with as many details as possible. Also please tell us if your scanner isn't mentioned in this list at all.
For an explanation of the tables, see the legend.
Device type | Number of devices | |||||||
---|---|---|---|---|---|---|---|---|
Total | Supported | Untested | Unsupported | |||||
Sum | Complete | Good | Basic | Minimal | ||||
Scanners | 2012 | 1205 | 417 | 662 | 101 | 25 | 325 | 482 |
Still cameras | 5 | 5 | 1 | 2 | 2 | 0 | 0 | 0 |
Video Cameras | 8 | 3 | 0 | 1 | 0 | 2 | 3 | 2 |
Meta backends | 2 | n/a | ||||||
APIs | 5 | n/a |
Manufacturers: Abaton, Acer Peripherals, Across Technologies, Actown, Adlib, Advent, AGFA, Ambir, Apple, Aries, Artec/Ultima, Avigramm, Avision, Bell and Howell, Bell+Howell, BenQ, Benq (Acer), BlackWidow, Boeder, BrightScan, Brother, C-Channel, Canon, Chinon, Compaq, Compeye, Corex, Cybercom, DCT, Dell, Devcom, Dextra, Dexxa, E-Lux, EDGE, EDT (Electronic Document Technology), Enhans, Epson, Escom, Escort, Fujitsu, Gallery, Genius, Googlegear, Guillemot, Guillemot / Hercules, Hercules, Hewlett-Packard, IBM, IOMagic, Iris, iVina, Kodak, Komodo, KONICA MINOLTA, Kyocera, LEO, Lexmark, Linotype Hell, Logitech, Medion/Lifetec/Tevion/Cytron, Memorex, Micromaxx, Microstar, Microtek, Minolta, Minolta-QMS, Mitsubishi, Mustek, NeatReceipts, NEC, Network, Nikon, Nortek, OKI, Olivetti, Olympus, Optoelectronics, Optrox, Packard Bell, Panasonic, Pentax, PIE, PIOTECH, PLANon, Plustek, Portable Peripheral Co., Ltd., Primax, Prolink, Quato, Reflecta, Relisys, RevScan, Ricoh, Samsung, Scanport, Scanshell, Sceptre, Sharp, Sicos, Siemens, SmartDisk, Spot Technology, Syscan, Tamarack, Targa, TCE, Teco, Tiny, TriGem, Trust, UMAX, Vantas, Visioneer, Viviscan, Vobis, Vuego, Xerox, Yakumo
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Scan 300/GS | SCSI | Complete | All known modes and functions supported |
abaton (unmaintained) |
sane-abaton | |
Scan 300/S | SCSI | Untested | Untested, use with caution |
abaton (unmaintained) |
sane-abaton |
Comment: Company was renamed to Benq.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
FS-1130 | SCSI | Good | FCC ID LUZFS1130 |
leo
(1.0-10) |
sane-leo |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
ACT Scan I 30 | SCSI | Untested | sub model VM3520A |
teco1
(1.0-10) |
sane-teco1 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
JetScan630 | SCSI | Good |
pie
(1.0) |
sane-pie | ||
JetScan636PRO | SCSI | Untested |
pie
(1.0) |
sane-pie |
Link(s):
http://www.adventcomputers.co.uk
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
AW10 | USB | 0x040a/0x4060 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
Link(s):
http://www.agfa.com/, http://www.agfa.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Arcus 1200 | SCSI | Good | Optional transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan | |
Arcus II | SCSI | Good | Arcus *II*, not Arcus! |
microtek
(0.13.1) |
sane-microtek | |
DuoScan | SCSI | Basic |
microtek
(0.13.1) |
sane-microtek | ||
DuoScan f40 | USB IEEE-1394 | 0x06bd/0x02bf | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
DuoScan T2000XL | SCSI | Unsupported | Unsupported. Same as Microtek ArtixScan 2020? |
unsupported
(2010-06-09) |
? | |
DuoScan T2500 | SCSI IEEE-1384 | Unsupported | Unsupported. Same as Microtek Artixscan 2500f |
unsupported
(2010-06-09) |
? | |
Focus Color | SCSI | Good | 3-pass |
agfafocus (unmaintained) |
sane-agfafocus | |
Focus Color Plus | SCSI | Good | 3-pass |
agfafocus (unmaintained) |
sane-agfafocus | |
Focus GS Scanner | SCSI | Untested | 6 bit gray |
agfafocus (unmaintained) |
sane-agfafocus | |
Focus II | SCSI | Untested | gray only |
agfafocus (unmaintained) |
sane-agfafocus | |
Focus Lineart Scanner | SCSI | Untested | Lineart only? Untested. |
agfafocus (unmaintained) |
sane-agfafocus | |
SnapScan | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
SnapScan 300 | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
SnapScan 310 | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
SnapScan 310P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
SnapScan 600 | SCSI | Good | Optional ADF supported. |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan 1200P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
SnapScan 1212P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
SnapScan 1212U | USB | 0x06bd/0x0001 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan 1212U_2 | USB | 0x06bd/0x2061 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan 1236s | SCSI | Good | Optional ADF and transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan 1236u | USB | 0x06bd/0x0002 | Good | Optional ADF and transparency unit supported. |
SnapScan
(1.4) |
sane-snapscan |
SnapScan e10 | USB | 0x06bd/0x2093 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e20 | USB | 0x06bd/0x2091 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e25 | USB | 0x06bd/0x2095 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e26 | USB | 0x06bd/0x2097 | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e40 | USB | 0x06bd/0x208d | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e42 | USB | 0x06bd/0x20ff | Good |
SnapScan
(1.4) |
sane-snapscan | |
SnapScan e50 | USB | 0x06bd/0x208f | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
SnapScan e52 | USB | 0x06bd/0x20fd | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
SnapScan e60 | USB | Untested |
SnapScan
(1.4) |
sane-snapscan | ||
SnapScan EZ | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
Snapscan Touch | USB | 0x06bd/0x0100 | Complete |
niash
(0.3) |
sane-niash | |
StudioScan | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
StudioScan II | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
StudioScan IIsi | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
Studiostar | SCSI | Minimal | Is detected but scans are very dark |
microtek
(0.13.1) |
sane-microtek |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Visigo A4 | USB | 0x0a82/0x4600 | Complete | Rebaged Travelscan 464 |
plustek
(0.52) |
sane-plustek |
Link(s):
http://developer.apple.com/, http://www.apple.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Apple Scanner | SCSI | Good | 4bit, 16 shades of gray |
apple (unmaintained) |
sane-apple | |
Color OneScanner | SCSI | Minimal | truecolor (needs much work) but it scans in non color modes. |
apple (unmaintained) |
sane-apple | |
Color OneScanner 600/27 | SCSI | Good | Rebadged CanoScan 300 |
canon
(1.12) |
sane-canon | |
OneScanner | SCSI | Basic | 8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. |
apple (unmaintained) |
sane-apple |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Scan-It Pro 4800 | Parport (SPP, EPP) | Complete | use driver-switch mov=2 |
plustek_pp
(0.43) |
sane-plustek_pp |
Link(s):
http://www.artecusa.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
1236 USB | USB | 0x05d8/0x4001 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
A6000C | SCSI | Complete | all modes working |
artec
(unmaintained) |
sane-artec | |
A6000C PLUS | SCSI | Complete | f/w <= v1.92 basic, f/w >= v1.93 OK |
artec
(unmaintained) |
sane-artec | |
AM12e+ | Parport | Unsupported | Unsupported. Chips found inside: AT015, AD9816JS. Maybe similar to SCSI version or as6e? |
unsupported
(2010-06-09) |
? | |
AM12S | SCSI | Complete | all modes working |
artec
(unmaintained) |
sane-artec | |
AS6E | Parport | Basic | Requires the program 'as6edriver' to run. |
as6e
(0.5) |
sane-as6e | |
AT3 | SCSI | Complete | all modes working |
artec
(unmaintained) |
sane-artec | |
AT6 | SCSI | Good | Scan head needs to return home before another scan can be started. |
artec
(unmaintained) |
sane-artec | |
AT12 | SCSI | Complete | all modes working |
artec
(unmaintained) |
sane-artec | |
E+ 48U | USB | 0x05d8/0x4003 | Good | CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
E+ Pro | USB | 0x05d8/0x4004 | Minimal | Works up to 600dpi, but not 1200. Needs better calibration. See bug #310490 |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
Ultima 2000 | USB | 0x05d8/0x4002 | Good | Works, only product id 0x4002 is supported |
gt68xx
(1.0-84) |
sane-gt68xx |
Ultima 2000 (0x4001) | USB | 0x05d8/0x4001 | Unsupported | Same name, but different ids: This scanner is not supported. The scanner with product id 0x4002 is supported by the gt68xx backend, however. |
unsupported
(2010-06-09) |
? |
Ultima 2000 e+ | USB | 0x05d8/0x4002 | Good | Works, however 12 bit mode doesn't seem to be supported |
gt68xx
(1.0-84) |
sane-gt68xx |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Minidoc | USB Parport | 0x05cb/0x1483 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.avision.com, http://www.avision.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
@V2500 | USB | 0x0638/0x0aa1 | Untested |
avision
(Build: 296) |
sane-avision | |
@V5100 | USB | 0x0638/0x0a45 | Good | 1 pass, 1200 dpi, A3 - duplex!, LCD screen, paper sensors |
avision
(Build: 296) |
sane-avision |
AM3000 Series | USB | 0x0638/0x0a41 | Basic | MFD |
avision
(Build: 296) |
sane-avision |
AV100CS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV100IIICS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV100S | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV120 | USB | 0x0638/0x0a27 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV121 | USB | 0x0638/0x0a3c | Good | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV122 | USB | 0x0638/0x0a33 | Good | sheetfed duplex scanner |
avision
(Build: 296) |
sane-avision |
AV122 C2 | USB | 0x0638/0x0a93 | Good | sheetfed duplex scanner |
avision
(Build: 296) |
sane-avision |
AV210 | USB | 0x0638/0x0a25 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV210 | USB | 0x0638/0x0a24 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV210C2 | USB | 0x0638/0x0a3a | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV210C2-G | USB | 0x0638/0x0a2f | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV210D2+ | USB | 0x0638/0x1a35 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220 | USB | 0x0638/0x0a23 | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220+ | USB | 0x0638/0x0a2c | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220-G | USB | 0x0638/0x0a94 | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220C2 | USB | 0x0638/0x0a2a | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220C2-B | USB | 0x0638/0x0a2e | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220C2-G | USB | 0x0638/0x0a2d | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV220D2 | USB | 0x0638/0x0a2b | Complete | duplex! sheetfed scanner |
avision
(Build: 296) |
sane-avision |
AV240SC | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV260CS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV360CS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV363CS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV420CS | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV600U | USB | 0x0638/0x0a13 | Good | 1 pass, 600 dpi |
avision
(Build: 296) |
sane-avision |
AV600U Plus | USB | 0x0638/0x0a18 | Good |
avision
(Build: 296) |
sane-avision | |
AV610 | USB | 0x0638/0x0a18 | Good |
avision
(Build: 296) |
sane-avision | |
AV610C2 | USB | 0x0638/0x0a5e | Good |
avision
(Build: 296) |
sane-avision | |
AV620CS | SCSI | Complete | 1 pass, 600 dpi |
avision
(Build: 296) |
sane-avision | |
AV620CS Plus | SCSI | Complete | 1 pass, 1200 dpi |
avision
(Build: 296) |
sane-avision | |
AV630CS | SCSI | Complete | 1 pass, 1200 dpi |
avision
(Build: 296) |
sane-avision | |
AV630CSL | SCSI | Untested | 1 pass, 1200 dpi |
avision
(Build: 296) |
sane-avision | |
AV660S | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV680S | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV690U | SCSI | Untested | 1 pass, 2400 dpi |
avision
(Build: 296) |
sane-avision | |
AV800S | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV810C | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV820 | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV820C | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV820C Plus | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV830C | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV830C Plus | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV880 | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV880C | SCSI | Untested | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV3200C | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV3200SU | USB | 0x0638/0x0a4e | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision |
AV3730SU | USB | 0x0638/0x0a4f | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision |
AV3750SU | USB | 0x0638/0x0a65 | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision |
AV3800C | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV3850SU | USB | 0x0638/0x0a66 | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision |
AV6120 | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
AV6240 | SCSI | Complete | 1 pass, ??? dpi |
avision
(Build: 296) |
sane-avision | |
AV8000S | SCSI | Complete | 1 pass, 1200 dpi, A3 |
avision
(Build: 296) |
sane-avision | |
AV8050U | USB | 0x0638/0x0a4d | Complete | 1 pass, 1200 dpi, A3 - duplex! |
avision
(Build: 296) |
sane-avision |
AV8300 | USB | 0x0638/0x0a40 | Complete | 1 pass, 1200 dpi, A3 - duplex! |
avision
(Build: 296) |
sane-avision |
AV8350 | USB | 0x0638/0x0a68 | Complete | 1 pass, 1200 dpi, A3 - duplex! |
avision
(Build: 296) |
sane-avision |
AVA3 | SCSI | Basic | 1 pass, 600 dpi, A3 |
avision
(Build: 296) |
sane-avision | |
DS310F | Parport | Unsupported | Probably not supported. Scanner/printer/copier combination. |
unsupported
(2010-06-09) |
? | |
DS610CU Scancopier | USB | 0x0638/0x0a16 | Good | 1 pass, 600 dpi, A4 |
avision
(Build: 296) |
sane-avision |
FB2080E | USB | 0x0638/0x0a84 | Basic | 1 pass, 600 dpi, zero-edge |
avision
(Build: 296) |
sane-avision |
FB6000E | SCSI | Complete | 1 pass, 1200 dpi, A3 - duplex! - zero edge! |
avision
(Build: 296) |
sane-avision | |
FB6080E | USB | 0x0638/0x0a82 | Complete | 1 pass, 1200 dpi, A3 - duplex! - zero edge! |
avision
(Build: 296) |
sane-avision |
IT8300 | USB | 0x0638/0x0a61 | Good | 1 pass, 1200 dpi, A3 - duplex!, LCD screen, paper sensors |
avision
(Build: 296) |
sane-avision |
iVina 1600 | USB | 0x0638/0x0a10 | Unsupported | GL646 based, to be added to genesys backend. Same as UMAX Astra 4500. |
unsupported
(2010-06-09) |
? |
iVina FB1800 | USB | 0x0638/0x0a20 | Unsupported | GL646/GL660 based. Same as UMAX Astra 4700. |
unsupported
(2010-06-09) |
? |
iVina FB2400 | USB | Unsupported | Not supported. No chipset information available. Same as UMAX Astra 6700. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.bhscanners.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
COPISCAN II 2135 | SCSI | Untested | Simplex Scanner |
bh
(1.0-4) |
sane-bh | |
COPISCAN II 2137(A) | SCSI | Good | Simplex Scanner (with ACE) - limited testing |
bh
(1.0-4) |
sane-bh | |
COPISCAN II 2138A | SCSI | Untested | Simplex Scanner with ACE |
bh
(1.0-4) |
sane-bh | |
COPISCAN II 3238 | SCSI | Untested | Simplex Scanner |
bh
(1.0-4) |
sane-bh | |
COPISCAN II 3338(A) | SCSI | Untested | Simplex Scanner (with ACE) |
bh
(1.0-4) |
sane-bh | |
COPISCAN II 6338 | SCSI | Good | Duplex Scanner with ACE - development model |
bh
(1.0-4) |
sane-bh |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
2000F | SCSI | Basic | 1 pass, ??? dpi, A4 |
avision
(Build: 296) |
sane-avision |
Link(s):
http://www.benq.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
5550 | USB | 0x04a5/0x2211 | Minimal | developing yet |
hp3900
(0.12) |
sane-hp3900 |
Link(s):
http://www.benq.com
Comment: Formerly Acer Peripherals
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
300f | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
310P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
310s | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
310U | USB | 0x04a5/0x1a20 | Good |
SnapScan
(1.4) |
sane-snapscan | |
320P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
320U | USB | 0x04a5/0x2022 | Good |
SnapScan
(1.4) |
sane-snapscan | |
340P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
340U | USB | 0x04a5/0x2022 | Good |
SnapScan
(1.4) |
sane-snapscan | |
610P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
610plus | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
610PT | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
610s | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
620P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
620PT | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
620s | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan | ||
620U | USB | 0x04a5/0x1a2a | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
620UT | USB | 0x04a5/0x2040 | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
640BT | USB | 0x04a5/0x20be | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
640bu | USB | 0x04a5/0x207e | Good |
SnapScan
(1.4) |
sane-snapscan | |
640P | Parport | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
640U | USB | 0x04a5/0x2060 | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
1240 | USB | 0x04a5/0x20c0 | Good | Optional tranparency unit supported |
SnapScan
(1.4) |
sane-snapscan |
3300 | USB | 0x04a5/0x20de | Good |
SnapScan
(1.4) |
sane-snapscan | |
3300 | USB | 0x04a5/0x20b0 | Good |
SnapScan
(1.4) |
sane-snapscan | |
4300 | USB | 0x04a5/0x20de | Good |
SnapScan
(1.4) |
sane-snapscan | |
4300 | USB | 0x04a5/0x20b0 | Good |
SnapScan
(1.4) |
sane-snapscan | |
5000 | USB | 0x04a5/0x20f8 | Good | USB ID 0x04a5,0x20f8: Color / grayscale scans working up to 1200 DPI |
SnapScan
(1.4) |
sane-snapscan |
5000E | USB | 0x04a5/0x20fc | Basic | Same as 5000U, working up to 600 DPI |
SnapScan
(1.4) |
sane-snapscan |
5000U | USB | 0x04a5/0x20fc | Basic | Same as 5000E, working up to 600 DPI |
SnapScan
(1.4) |
sane-snapscan |
5150 | USB | 0x04a5/0x2137 | Basic | Calibration algorithm unknown |
SnapScan
(1.4) |
sane-snapscan |
5250 | USB | 0x04a5/0x2137 | Basic | Same hardware as 5150 (?), Calibration algorithm unknown |
SnapScan
(1.4) |
sane-snapscan |
5300 | USB | 0x04a5/0x20fe | Basic | Problems with firmware upload reported |
SnapScan
(1.4) |
sane-snapscan |
5450 | USB | 0x04a5/0x211e | Unsupported | Unsupported. |
unsupported
(2010-06-09) |
? |
5550 | USB | 0x04a5/0x2211 | Unsupported | Unsupported, see link for details. |
unsupported
(2010-06-09) |
? |
5560 | USB | 0x04a5/0x2311 | Unsupported |
unsupported
(2010-06-09) |
? | |
7400UT | USB | 0x04a5/0x2202 | Unsupported |
unsupported
(2010-06-09) |
? | |
ScanWit 2720s | SCSI | Good |
SnapScan
(1.4) |
sane-snapscan |
Link(s):
http://www.blackwidow.co.uk/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
BW4800SP | SCSI | Complete | rebadged Artec AT3 |
artec
(unmaintained) |
sane-artec |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Sm@rtScan Office | Parport USB | 0x05cb/0x1483 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Sm@rtScan Slim Edition | USB | 0x05d8/0x4002 | Good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-84) |
sane-gt68xx |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
BrighScan OpticPro | Parport (SPP, EPP) | Complete | Reported as P12 |
plustek_pp
(0.43) |
sane-plustek_pp |
Link(s):
http://www.brother.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MFC 2500 | USB | 0x04f9/0x000a | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
MFC 4600 | Parport | Unsupported | The parport 200x400dpi grayscale version of this scanner is unsupported. Dmitri Katchalov did some investigations on this scanner. If you want to write a backend, contact him (see link). |
unsupported
(2010-06-09) |
? | |
MFC 7300c | Parport USB | 0x04f9/0x0106 | Unsupported |
unsupported
(2010-06-09) |
? | |
MFC 9600 | USB | 0x04f9/0x0101 | Unsupported |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.c-channel.ch/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MoneyPen II | USB | Unsupported | Probably unsupported. |
unsupported
(2010-06-09) |
? | |
MyPen Light | USB | 0x0a93/0x0005 | Unsupported | See bug #306792 for details. |
unsupported
(2010-06-09) |
? |
MyPen Pro | USB | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.canon.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Canon Image Formula 101 | USB | 0x1083/0x162e | Unsupported | GL846 based, work in progress |
genesys
(1.0-63) |
sane-genesys |
CanoScan 300 | SCSI | Good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon | |
CanoScan 600 | SCSI | Good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon | |
CanoScan 620S | SCSI | Good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon | |
CanoScan 700F | USB | 0x04a9/0x1907 | Good | GL847 based, resolution from 75 to 4800 dpi |
genesys
(1.0-63) |
sane-genesys |
CanoScan 1200S | SCSI | Good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon | |
CanoScan 2700F | SCSI | Good | 1 pass; film scanner |
canon
(1.12) |
sane-canon | |
CanoScan 2710S | SCSI | Good | 1 pass; 36bit film scanner |
canon
(1.12) |
sane-canon | |
CanoScan 3000 | USB | 0x04a9/0x2215 | Unsupported | GL660+GL646 based. |
unsupported
(2010-06-09) |
? |
CanoScan 3000ex | USB | 0x04a9/0x2215 | Unsupported | GL660+GL646 based. |
unsupported
(2010-06-09) |
? |
CanoScan 3000F | USB | 0x04a9/0x2215 | Unsupported | GL660+GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan 4200F | USB | 0x04a9/0x221b | Unsupported | Probably unsupported. See link. |
unsupported
(2010-06-09) |
? |
CanoScan 4400F | USB | 0x04a9/0x2228 | Unsupported | GL843 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan 4400f | USB | 0x04a9/0x2228 | Unsupported | GL843 based, to be added to the genesys backend |
genesys
(1.0-63) |
sane-genesys |
CanoScan 5000F | USB | 0x04a9/0x2212 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
CanoScan 5200F | USB | 0x04a9/0x2217 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
CanoScan 5600F | USB | 0x04a9/0x1906 | Unsupported | GL847 based, to be added to the genesys backend |
genesys
(1.0-63) |
sane-genesys |
CanoScan 8000F | USB | 0x04a9/0x220f | Unsupported | Not supported. See link for more information. With transparency adapter. |
unsupported
(2010-06-09) |
? |
CanoScan 8400F | USB | 0x04a9/0x221e | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan 8600F | USB | 0x04a9/0x2229 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan 8800F | USB | 0x04a9/0x1901 | Complete | Flatbed scan. TPU for negatives and slides. All resolutions supported (up to 4800DPI). |
pixma
(0.17.3) |
sane-pixma |
CanoScan 9000F | USB | 0x04a9/0x1908 | Complete | Full flatbed support up to 4800DPI (Note: flatbed does not have 9600DPI capability). Full TPU support (negatives, slides and infrared) up to 9600DPI. |
pixma
(0.17.3) |
sane-pixma |
CanoScan 9000F Mark II | USB | 0x04a9/0x190d | Complete | Full flatbed support up to 4800DPI (Note: flatbed does not have 9600DPI capability). Full TPU support (negatives, slides and infrared) up to 9600DPI. |
pixma
(0.17.3) |
sane-pixma |
CanoScan 9900F | USB | 0x04a9/0x2210 | Unsupported | Probably unsupported, similar to 8000F. 3200x6400 dpi USB2. With transparency adapter. |
unsupported
(2010-06-09) |
? |
CanoScan 9950F | USB | 0x04a9/0x2219 | Unsupported | Probably unsupported. |
unsupported
(2010-06-09) |
? |
CanoScan D646U | USB | 0x04a9/0x220b | Unsupported | Probably not supported. See link for more information and test program. |
unsupported
(2010-06-09) |
? |
CanoScan D646U ex | USB | 0x04a9/0x220b | Unsupported | Probably not supported. See D646. |
unsupported
(2010-06-09) |
? |
CanoScan D660U | USB | 0x04a9/0x2208 | Good | TPA scans not perfect |
plustek
(0.52) |
sane-plustek |
CanoScan D1230U | USB | 0x04a9/0x2209 | Unsupported | Probably not supported. |
unsupported
(2010-06-09) |
? |
CanoScan D1250U2 | USB | 0x04a9/0x220c | Unsupported | Not supported. However, someone started working on this scanner and some information is available (see link). |
unsupported
(2010-06-09) |
? |
CanoScan D2400UF | USB | 0x04a9/0x220a | Unsupported | Not supported. See link. |
unsupported
(2010-06-09) |
? |
CanoScan FB310P | Parport (ECP) | Unsupported | Rebadged Avision, different command set |
canon_pp
(0.33) |
sane-canon_pp | |
CanoScan FB320P | Parport (ECP) | Basic | Newly added support |
canon_pp
(0.33) |
sane-canon_pp | |
CanoScan FB320U | USB | 0x04a9/0x2201 | Unsupported | Probably not supported. No details known. |
unsupported
(2010-06-09) |
? |
CanoScan FB330P | Parport (ECP) | Good |
canon_pp
(0.33) |
sane-canon_pp | ||
CanoScan FB610P | Parport (ECP) | Unsupported | Rebadged Avision, different command set |
canon_pp
(0.33) |
sane-canon_pp | |
CanoScan FB620P | Parport (ECP) | Basic | Newly added support |
canon_pp
(0.33) |
sane-canon_pp | |
CanoScan FB620U | USB | 0x04a9/0x2202 | Unsupported | Probably not supported. Some information is available. |
unsupported
(2010-06-09) |
? |
CanoScan FB630P | Parport (ECP) | Good |
canon_pp
(0.33) |
sane-canon_pp | ||
CanoScan fb630u | USB | 0x04a9/0x2204 | Good | OK |
canon630u
(0.1) |
sane-canon630u |
CanoScan fb636u | USB | 0x04a9/0x2204 | Good | OK |
canon630u
(0.1) |
sane-canon630u |
CanoScan FB1210U | USB | 0x04a9/0x2205 | Unsupported | Not supported. However, a stand-alone program for FreeBSD is available. |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 35 | USB | 0x04a9/0x2213 | Good | Same ids as LiDE 50. |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 40 | USB | 0x04a9/0x2213 | Good | Same ids as LiDE 50. |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 50 | USB | 0x04a9/0x2213 | Good |
genesys
(1.0-63) |
sane-genesys | |
CanoScan LiDE 60 | USB | 0x04a9/0x221c | Good |
genesys
(1.0-63) |
sane-genesys | |
CanoScan LiDE 70 | USB | 0x04a9/0x2225 | Unsupported | Philips chip. Backend started, see link |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 80 | USB | 0x04a9/0x2214 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 90 | USB | 0x04a9/0x1900 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 100 | USB | 0x04a9/0x1904 | Complete | GL847 based, resolution from 75 to 2400 dpi |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 110 | USB | 0x04a9/0x1909 | Complete | GL124 based, resolution from 75 to 2400 dpi |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 200 | USB | 0x04a9/0x1905 | Complete | GL847 based, resolution from 75 to 4800 dpi |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 210 | USB | 0x04a9/0x190a | Complete | GL124 based, resolution from 75 to 2400 dpi |
genesys
(1.0-63) |
sane-genesys |
CanoScan LiDE 500F | USB | 0x04a9/0x221f | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 600 | USB | 0x04a9/0x2224 | Unsupported | Philips chip. Backend started, see link |
unsupported
(2010-06-09) |
? |
CanoScan LiDE 600F | USB | 0x04a9/0x2224 | Unsupported | Philips chip. Backend started, see link |
unsupported
(2010-06-09) |
? |
CanoScan LiDE25 | USB | 0x04a9/0x2220 | Good |
plustek
(0.52) |
sane-plustek | |
CanoScan N340P | Parport (ECP) | Good |
canon_pp
(0.33) |
sane-canon_pp | ||
CanoScan N640P | Parport (ECP) | Good |
canon_pp
(0.33) |
sane-canon_pp | ||
CanoScan N640P ex | Parport (ECP) | Good | Just an N640P in a different box? |
canon_pp
(0.33) |
sane-canon_pp | |
CanoScan N650U/N656U | USB | 0x04a9/0x2206 | Complete |
plustek
(0.52) |
sane-plustek | |
CanoScan N670U/N676U/LiDE20 | USB | 0x04a9/0x220d | Complete |
plustek
(0.52) |
sane-plustek | |
CanoScan N1220U | USB | 0x04a9/0x2207 | Complete |
plustek
(0.52) |
sane-plustek | |
CanoScan N1240U/LiDE30 | USB | 0x04a9/0x220e | Complete |
plustek
(0.52) |
sane-plustek | |
CR-25 | USB | 0x1083/0x161a | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
CR-55 | USB | 0x1083/0x160c | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
CR-135i | USB SCSI | 0x1083/0x1639 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
CR-180 | USB SCSI | 0x04a9/0x1602 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
CR-180II | USB SCSI | 0x04a9/0x1602 | Untested | Same as CR-180? Please test! |
canon_dr
(38) |
sane-canon_dr |
CR-190i | USB SCSI | 0x1083/0x162b | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-1210C | USB | 0x1083/0x160f | Untested | Later version? Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-1210C | USB | 0x04a9/0x2222 | Untested | Older version? Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-2010C | USB | 0x1083/0x161b | Complete | Hardware provides: Gray/Color, Simplex/Duplex, Full-width, 300/600dpi horizontal. Driver provides: Binary, Despeckle, Deskew, Cropping, Calibration, other resolutions. |
canon_dr
(38) |
sane-canon_dr |
DR-2010M | USB | Untested | Mac version of DR-2010C? Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-2020U | USB | Unsupported | GL84x? |
unsupported
(2010-06-09) |
? | |
DR-2050C | USB | 0x04a9/0x160a | Complete | Hardware provides: Gray/Color, Simplex/Duplex, Full-width. Driver provides: Binary, Despeckle, Deskew, Cropping, Calibration. |
canon_dr
(38) |
sane-canon_dr |
DR-2050SP | USB | 0x04a9/0x160a | Untested | Same as DR-2050C? Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-2080C | USB SCSI | 0x04a9/0x1601 | Complete | Hardware provides: Gray/Color, Simplex/Duplex, Full-width. Driver provides: Binary, Despeckle, Deskew, Cropping, Calibration |
canon_dr
(38) |
sane-canon_dr |
DR-2510C | USB | 0x1083/0x1617 | Complete | Hardware provides: Gray/Color, Simplex/Duplex, Full-width, 300/600dpi horizontal. Driver provides: Binary, Despeckle, Deskew, Cropping, Calibration, other resolutions |
canon_dr
(38) |
sane-canon_dr |
DR-2510M | USB | Untested | Mac version of DR-2510C? Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-2580C | USB SCSI | 0x04a9/0x1608 | Complete | Hardware provides: Gray/Color, Simplex/Duplex, Full-width. Driver provides: Binary, Despeckle, Deskew, Cropping, Calibration |
canon_dr
(38) |
sane-canon_dr |
DR-3010C | USB | 0x1083/0x161d | Good | Minimal testing, settings copied from DR-2510C |
canon_dr
(38) |
sane-canon_dr |
DR-3020C | SCSI | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-3060 | SCSI | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-3080C | SCSI | Untested | Almost works, need to investigate traces from windows driver |
canon_dr
(38) |
sane-canon_dr | |
DR-3080CII | USB SCSI | 0x04a9/0x1609 | Untested | Almost works, need to investigate traces from windows driver |
canon_dr
(38) |
sane-canon_dr |
DR-4010C | USB | 0x1083/0x1614 | Good | Binary/HT/Gray/Color, Simplex/Duplex working. Multistream unsupported. |
canon_dr
(38) |
sane-canon_dr |
DR-4580U | USB | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-5010C | USB | 0x04a9/0x1606 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-5020 | SCSI | Good | LineArt, Duplex working, cannot read buttons or screen? |
canon_dr
(38) |
sane-canon_dr | |
DR-5060F | SCSI | Basic | Grayscale works, LineArt might |
canon_dr
(38) |
sane-canon_dr | |
DR-5080C | SCSI | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR-6010C | USB SCSI | 0x1083/0x1626 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-6030C | USB SCSI | 0x1083/0x1638 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-6050C | USB SCSI | 0x1083/0x1624 | Good | Simplex, duplex, all resolutions, binary/ht/gray working. Can't wake from stand-by mode |
canon_dr
(38) |
sane-canon_dr |
DR-6080 | USB SCSI | 0x04a9/0x1607 | Good | Simplex, duplex, all resolutions, binary/ht/gray, async mode, dropout-color, multifeed/staple detection, deskew, buttons and JPEG working. Imprinter, barcode, custom gamma and multistream unsupported |
canon_dr
(38) |
sane-canon_dr |
DR-7080C | USB SCSI | 0x04a9/0x1604 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR-7090C | USB SCSI | 0x1083/0x1620 | Good | ADF and flatbed work |
canon_dr
(38) |
sane-canon_dr |
DR-7550C | USB SCSI | 0x1083/0x1623 | Untested | Assumed compatible with DR-6050C |
canon_dr
(38) |
sane-canon_dr |
DR-7580 | USB SCSI | 0x04a9/0x160b | Good | Simplex, duplex, all resolutions, binary/ht/gray, async mode, dropout-color, multifeed/staple detection, deskew, buttons and JPEG working. Imprinter, barcode, custom gamma and multistream unsupported |
canon_dr
(38) |
sane-canon_dr |
DR-9050C | USB SCSI | 0x1083/0x1622 | Good | Simplex, duplex, all resolutions, binary/ht/gray working. Can't wake from stand-by mode |
canon_dr
(38) |
sane-canon_dr |
DR-9080C | USB SCSI | 0x04a9/0x1603 | Good | Simplex, duplex, all resolutions, binary/ht/gray/color, async mode, dropout-color, multifeed/staple detection, deskew, buttons and JPEG working. Imprinter, barcode, custom gamma and multistream unsupported |
canon_dr
(38) |
sane-canon_dr |
DR-X10C | USB SCSI | 0x1083/0x1618 | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr |
DR3020 | SCSI | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
DR4080U | USB | Untested | Please test! |
canon_dr
(38) |
sane-canon_dr | |
FS4000 | USB SCSI | 0x04a9/0x3042 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
i-SENSYS MF3010 | USB Ethernet | 0x04a9/0x2759 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
I-SENSYS MF4320d | USB | 0x04a9/0x26ee | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
I-SENSYS MF4330d | USB | 0x04a9/0x26ee | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
i-SENSYS MF4550d | USB | 0x04a9/0x2736 | Good | Flatbed and ADF scan. All resolutions supported (up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
i-SENSYS MF5880dn | USB | 0x04a9/0x26f9 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
i-SENSYS MF6680dn | USB | 0x04a9/0x26fa | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
imageCLASS D420 | USB | 0x04a9/0x26ef | Complete | All resolutions supported (up to 600DPI). Flatbed, ADF simplex and Duplex supported. |
pixma
(0.17.3) |
sane-pixma |
imageCLASS D480 | USB | 0x04a9/0x26ed | Complete | All resolutions supported (up to 600DPI). Flatbed, ADF simplex and Duplex supported. |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF3110 | USB | 0x04a9/0x2660 | Complete | All resolutions supported (up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF3240 | USB | 0x04a9/0x2684 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4010 | USB | 0x04a9/0x26b4 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4018 | USB | 0x04a9/0x26b4 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4120 | USB | 0x04a9/0x26a3 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4122 | USB | 0x04a9/0x26a3 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4140 | USB | 0x04a9/0x26a3 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4150 | USB | 0x04a9/0x26a3 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4270 | USB | 0x04a9/0x26b5 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4350d | USB | 0x04a9/0x26ee | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4370dn | USB | 0x04a9/0x26ec | Good | Flatbed and ADF scan. All resolutions supported (up to 600DPI). Network not supported |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4380dn | USB | 0x04a9/0x26ec | Good | Flatbed and ADF scan. All resolutions supported (up to 600DPI). Network not supported |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4410 | USB | 0x04a9/0x2737 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4430 | USB | 0x04a9/0x2737 | Good | Flatbed and ADF scan. All resolutions supported (up to 600DPI). ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4660 | USB | 0x04a9/0x26b0 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF4690 | USB | 0x04a9/0x26b0 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF5630 | USB | 0x04a9/0x264e | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF5730 | USB | 0x04a9/0x265d | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF5750 | USB | 0x04a9/0x265e | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF5770 | USB | 0x04a9/0x265f | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF6500 series | USB | 0x04a9/0x2686 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF6550 | USB | 0x04a9/0x2686 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF8030 | USB | 0x04a9/0x2707 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
imageCLASS MF8170c | USB | 0x04a9/0x2659 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
imageRUNNER 1020/1024/1025 | USB | 0x04a9/0x26e6 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
ImageRunner iR1018 | USB | 0x04a9/0x269d | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
ImageRunner iR1022 | USB | 0x04a9/0x269d | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
ImageRunner iR1023 | USB | 0x04a9/0x269d | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
IS 12 | USB | Unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2010-06-09) |
? | |
IS 22 | Parport | Unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2010-06-09) |
? | |
IS 32 | USB | 0x04a9/0x105d | Unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2010-06-09) |
? |
IS 52 | USB | Unsupported | Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
(2010-06-09) |
? | |
IX-4015 | SCSI | Good | 1 pass; flatbed scanner |
canon
(1.12) |
sane-canon | |
laserBase MF5650 | USB | 0x04a9/0x264f | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA E500 | USB | 0x04a9/0x1758 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA E510 | USB | 0x04a9/0x1761 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA E600 | USB | 0x04a9/0x175a | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA E610 | USB | 0x04a9/0x1767 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG2100 Series | USB | 0x04a9/0x1751 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG2200 Series | USB | 0x04a9/0x1760 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG3100 Series | USB WLAN | 0x04a9/0x1752 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG3200 Series | USB | 0x04a9/0x1762 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG4100 Series | USB | 0x04a9/0x1753 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG4200 Series | USB | 0x04a9/0x1763 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG5100 Series | USB | 0x04a9/0x1748 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG5200 Series | USB | 0x04a9/0x1749 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG5300 Series | USB | 0x04a9/0x1754 | Complete | All resolutions supported (up to 2400DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG5400 Series | USB | 0x04a9/0x1764 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG6100 Series | USB | 0x04a9/0x174a | Complete | All resolutions supported (up to 2400 DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG6200 Series | USB | 0x04a9/0x1755 | Complete | All resolutions supported (up to 4800 DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG6300 Series | USB Ethernet | 0x04a9/0x1765 | Complete | All resolutions supported (up to 2400DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG8100 Series | USB | 0x04a9/0x174b | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MG8200 Series | USB Ethernet | 0x04a9/0x1756 | Complete | All resolutions supported (up to 4800DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP110 | USB | 0x04a9/0x1700 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
PIXMA MP130 | USB | 0x04a9/0x1701 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
PIXMA MP140 | USB | 0x04a9/0x172b | Complete | All resolutions supported (up to 600 DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP150 | USB | 0x04a9/0x1709 | Good |
pixma
(0.17.3) |
sane-pixma | |
PIXMA MP160 | USB | 0x04a9/0x1714 | Basic |
pixma
(0.17.3) |
sane-pixma | |
PIXMA MP170 | USB | 0x04a9/0x170a | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP180 | USB | 0x04a9/0x1715 | Basic |
pixma
(0.17.3) |
sane-pixma | |
PIXMA MP190 | USB | 0x04a9/0x1734 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP210 | USB | 0x04a9/0x1721 | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP220 | USB | 0x04a9/0x1722 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP230 | USB | 0x04a9/0x175f | Complete | All resolutions supported (up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP240 | USB | 0x04a9/0x1732 | Complete | All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP250 | USB | 0x04a9/0x173a | Complete | All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP260 | USB | 0x04a9/0x1733 | Complete | All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP270 | USB | 0x04a9/0x173b | Complete | All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP280 | USB | 0x04a9/0x1746 | Good | All resolutions supported (up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP360 | USB | 0x04a9/0x263c | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP370 | USB | 0x04a9/0x263d | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP375R | USB | 0x04a9/0x263f | Untested | Same protocol as Pixma MP360/370/390? Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP390 | USB | 0x04a9/0x263e | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP450 | USB | 0x04a9/0x170b | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP460 | USB | 0x04a9/0x1716 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP470 | USB | 0x04a9/0x1723 | Complete | All resolutions supported (up to 2400DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP480 | USB | 0x04a9/0x1731 | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP490 | USB | 0x04a9/0x173c | Complete | All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP493 | USB | 0x04a9/0x1757 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP495 | USB | 0x04a9/0x1747 | Untested | Same protocol as Pixma MP280? Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP500 | USB | 0x04a9/0x170c | Good |
pixma
(0.17.3) |
sane-pixma | |
PIXMA MP510 | USB | 0x04a9/0x1717 | Complete | All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP520 | USB | 0x04a9/0x1724 | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP530 | USB | 0x04a9/0x1712 | Good |
pixma
(0.17.3) |
sane-pixma | |
PIXMA MP540 | USB | 0x04a9/0x1730 | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP550 | USB | 0x04a9/0x173d | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP560 | USB | 0x04a9/0x173e | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP600 | USB | 0x04a9/0x1718 | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP600R | USB Ethernet | 0x04a9/0x1719 | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP610 | USB | 0x04a9/0x1725 | Complete | All resolutions supported (up to 4800DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP620 | USB Ethernet | 0x04a9/0x172f | Complete | All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP630 | USB | 0x04a9/0x172e | Complete | All resolutions supported (up to 4800DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP640 | USB Ethernet | 0x04a9/0x173f | Complete | All resolutions supported (up to 4800DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP700 | USB | 0x04a9/0x2630 | Complete | All resolutions supported (flatbed color up to 1200DPI, grayscale up to 600DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP710 | USB | 0x04a9/0x264d | Complete | All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP730 | USB | 0x04a9/0x262f | Good | Flatbed color up to 1200DPI, grayscale up to 600DPI. ADF scan to be confirmed. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP740 | USB | 0x04a9/0x264c | Untested | Same protocol as Pixma MP710? Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP750 | USB | 0x04a9/0x1706 | Minimal | No grayscale. Canceling scan in ADF mode doesn't eject the paper! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP760 | USB | 0x04a9/0x1708 | Minimal | No grayscale. The scanner sometimes hangs! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP770 | USB | 0x04a9/0x1708 | Minimal | No grayscale. The scanner sometimes hangs! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP780 | USB | 0x04a9/0x1707 | Minimal | No grayscale. The scanner sometimes hangs! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP790 | USB | 0x04a9/0x1707 | Minimal | No grayscale. The scanner sometimes hangs! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP800 | USB | 0x04a9/0x170d | Complete | All resolutions supported up to 2400DPI. Full TPU support up to 2400DPI. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP800R | USB | 0x04a9/0x170e | Complete | All resolutions supported up to 2400DPI. Full TPU support up to 2400DPI. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP810 | USB | 0x04a9/0x171a | Complete | All resolutions supported up to 4800DPI. Full TPU support (negative and slides) up to 4800DPI. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP830 | USB | 0x04a9/0x1713 | Complete | All resolutions supported up to 2400DPI. Flatbed, ADF simplex and Duplex supported. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP960 | USB | 0x04a9/0x171b | Complete | All resolutions supported up to 4800DPI. Full TPU support (negative and slides) up to 4800DPI. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP970 | USB Ethernet | 0x04a9/0x1726 | Complete | All resolutions supported (up to 4800DPI). Full TPU support (negative and slides) at 24 or 48 bits. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP980 | USB Ethernet | 0x04a9/0x172d | Complete | Working fine at all resolutions. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MP990 | USB Ethernet | 0x04a9/0x1740 | Complete | Working fine at all resolutions. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX300 | USB | 0x04a9/0x1727 | Complete | Flatbed and ADF scan. All resolutions supported (up to 600DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX310 | USB | 0x04a9/0x1728 | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX320 | USB | 0x04a9/0x1736 | Untested | Same protocol as Pixma Generation 3? Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX330 | USB | 0x04a9/0x1737 | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX340 | USB | 0x04a9/0x1741 | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX350 | USB Ethernet | 0x04a9/0x1742 | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX360 | USB | 0x04a9/0x174d | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI). ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX370 Series | USB | 0x04a9/0x1759 | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI). |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX390 Series | USB | 0x04a9/0x1766 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX410 | USB Ethernet | 0x04a9/0x174e | Untested | Same protocol as Pixma MX420? Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX420 | USB Ethernet | 0x04a9/0x174f | Complete | Flatbed and ADF scan. All resolutions supported (up to 1200DPI). ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX430 Series | USB Ethernet | 0x04a9/0x175b | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX450 Series | USB | 0x04a9/0x1768 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX510 Series | USB Ethernet | 0x04a9/0x175c | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX520 Series | USB | 0x04a9/0x1769 | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX700 | USB Ethernet | 0x04a9/0x1729 | Complete | Flatbed and ADF scan. All resolutions supported (up to 2400DPI) |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX710 Series | USB Ethernet | 0x04a9/0x175d | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX720 Series | USB | 0x04a9/0x176a | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX850 | USB Ethernet | 0x04a9/0x172c | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX860 | USB Ethernet | 0x04a9/0x1735 | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX870 | USB Ethernet | 0x04a9/0x1743 | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported, ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX880 Series | USB Ethernet | 0x04a9/0x1750 | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported, ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX882 | USB Ethernet | 0x04a9/0x1750 | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported, ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX885 | USB Ethernet | 0x04a9/0x1750 | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported, ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX890 Series | USB Ethernet | 0x04a9/0x175e | Complete | All resolutions supported (up to 2400DPI). Flatbed, ADF simplex and Duplex supported, ADF empty buggy. |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX920 Series | USB | 0x04a9/0x176b | Untested | Testers needed! |
pixma
(0.17.3) |
sane-pixma |
PIXMA MX7600 | USB Ethernet | 0x04a9/0x171c | Complete | Flatbed and ADF scan. All resolutions supported (up to 4800DPI) |
pixma
(0.17.3) |
sane-pixma |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DS-3000 | Parport Serial Port | Unsupported | Unsupported at the moment, but a backend is in preparation. See link. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.compaq.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
S4-100 | USB | 0x049f/0x001a | Complete | Identical to UMAX 3400 |
plustek
(0.52) |
sane-plustek |
S200 | USB | 0x049f/0x0021 | Unsupported | Not supported. 2400x1200 dpi. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Simplex 1236C | Parport USB | 0x05cb/0x1483 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.cardscan.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
600c | USB | 0x08f0/0x0002 | Basic | 4 inch wide 8bit Gray or 24bit Color simplex card/receipt scanner |
cardscan
(2) |
sane-cardscan |
800c | USB | 0x08f0/0x0005 | Good | 4 inch wide 8bit Gray or 24bit Color simplex card/receipt scanner |
cardscan
(2) |
sane-cardscan |
Cardscan 500 | USB | 0x08f0/0x0001 | Unsupported | Probably not supported. Businesscard reader. |
unsupported
(2010-06-09) |
? |
Cardscan 700 C | USB | 0x08f0/0x0004 | Unsupported | Probably not supported. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
9352 | Parport (EPP) | Good | CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.docucap.com/
Comment: Successor of Syscan in the USA
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DocketPort 487 | USB | 0x1dcc/0x4810 | Basic | All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally. |
genesys
(1.0-63) |
sane-genesys |
Link(s):
http://www.dell.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
922 | USB | 0x413c/0x5109 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
1600n | Ethernet USB | 0x413c/0x5250 | Basic | Supports colour and monochrome scans over ethernet (USB not supported) | dell1600n_net | ? |
A920 | USB | 0x413c/0x5105 | Good | Relabelled X11xx model |
lexmark
(1.0-0) |
sane-lexmark |
A940 | USB | 0x413c/0x5106 | Unsupported | Probably rebadged Lexmark X5150. May work with sane-lexmark? See bug #312130 |
unsupported
(2010-06-09) |
? |
A960 | USB | 0x413c/0x5107 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Dell MFP Laser Printer 1815dn | USB | 0x413c/0x5124 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp |
Link(s):
http://www.blackwidow.co.uk/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
9630S | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
9636PRO | SCSI | Good |
pie
(1.0) |
sane-pie | ||
9636S | SCSI | Untested |
pie
(1.0) |
sane-pie |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DF-600P | SCSI | Good | sub model VM3510 |
teco1
(1.0-10) |
sane-teco1 | |
DF-1200T+ | SCSI | Untested | sub model VM3530+ |
teco1
(1.0-10) |
sane-teco1 | |
DF-4830T | SCSI | Untested | sub model VM4542 |
teco1
(1.0-10) |
sane-teco1 | |
DF-9624 | SCSI | Untested | sub model VM6530+ |
teco1
(1.0-10) |
sane-teco1 |
Link(s):
http://www.dexxa.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
4800 | Parport | Basic | Requires the program 'as6edriver' to run. |
as6e
(0.5) |
sane-as6e |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
j-6121 | Parport | Unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
KTX-9600US | SCSI | Untested | no feedback |
umax
(1.0-41) |
sane-umax |
Link(s):
http://www.bizcardreader.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
BizCardReader 900C | USB | 0x0a53/0x5001 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
j-6121 | Parport | Unsupported | Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
(2010-06-09) |
? | |
M-3630 A | Parport | Unsupported | Probably unsupported. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.epson.com/, http://www.epson.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Actionscanner II | parallel SCSI | Good | overseas version of the GT-5000 |
epson2 (1.0.124) |
sane-epson2 | |
Actionscanner II | SCSI Parport | Good | US version of GT-5000 |
epson
(unmaintained) |
sane-epson | |
AcuLaser CX11 | USB | 0x04b8/0x0815 | Good | overseas version of the LP-A500 |
epson2 (1.0.124) |
sane-epson2 |
AcuLaser CX11 | USB | 0x04b8/0x0815 | Good |
epson
(unmaintained) |
sane-epson | |
AcuLaser CX11NF | USB Network | 0x04b8/0x0815 | Good | network interface supported AcuLaser CX11 with network interface and fax |
epson2 (1.0.124) |
sane-epson2 |
AcuLaser CX11NF | USB | 0x04b8/0x0815 | Good |
epson
(unmaintained) |
sane-epson | |
AcuLaser CX21 | USB | 0x04b8/0x0835 | Good | network interface probably supported |
epson2 (1.0.124) |
sane-epson2 |
Artisan 700 | USB Network | 0x04b8/0x0846 | Good | network interface supported all-in-one overseas version of the EP-801A |
epson2 (1.0.124) |
sane-epson2 |
Artisan 710 Series | USB | 0x04b8/0x0852 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Artisan 800 | USB | 0x04b8/0x0844 | Good | network interface probably supported all-in-one overseas version of the EP-901A |
epson2 (1.0.124) |
sane-epson2 |
Artisan 810 Series | USB | 0x04b8/0x0853 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
CC-500L | USB | 0x04b8/0x010d | Unsupported | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
CC-550L | USB | 0x04b8/0x011a | Unsupported | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
CC-570L | USB | 0x04b8/0x0802 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
CC-600PX | USB | 0x04b8/0x0801 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
CC-700 | USB | 0x04b8/0x0108 | Unsupported | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
CX-3200 | USB | 0x04b8/0x0802 | Good |
epson
(unmaintained) |
sane-epson | |
CX-3600 | USB | 0x04b8/0x080e | Good |
epson
(unmaintained) |
sane-epson | |
CX-3650 | USB | 0x04b8/0x080e | Good |
epson
(unmaintained) |
sane-epson | |
CX-3700 | USB | 0x04b8/0x0818 | Good |
epson
(unmaintained) |
sane-epson | |
CX-3800 | USB | 0x04b8/0x0818 | Good |
epson
(unmaintained) |
sane-epson | |
CX-4200 | USB | 0x04b8/0x0820 | Good |
epson
(unmaintained) |
sane-epson | |
CX-4600 | USB | 0x04b8/0x080d | Good |
epson
(unmaintained) |
sane-epson | |
CX-4800 | USB | 0x04b8/0x0819 | Good |
epson
(unmaintained) |
sane-epson | |
CX-5000 | USB | 0x04b8/0x082b | Good |
epson
(unmaintained) |
sane-epson | |
CX-5200 | USB | 0x04b8/0x0801 | Good |
epson
(unmaintained) |
sane-epson | |
CX-5400 | USB | 0x04b8/0x0808 | Good |
epson
(unmaintained) |
sane-epson | |
CX-5400 | USB | 0x04b8/0x0801 | Good |
epson
(unmaintained) |
sane-epson | |
CX-6300 | USB | 0x04b8/0x0805 | Good |
epson
(unmaintained) |
sane-epson | |
CX-6400 | USB | 0x04b8/0x0805 | Good |
epson
(unmaintained) |
sane-epson | |
CX-6500 | USB | 0x04b8/0x0813 | Good |
epson
(unmaintained) |
sane-epson | |
CX-6600 | USB | 0x04b8/0x0813 | Good |
epson
(unmaintained) |
sane-epson | |
DX-3800 | USB | 0x04b8/0x0818 | Good |
epson
(unmaintained) |
sane-epson | |
DX-3850 | USB | 0x04b8/0x0818 | Good |
epson
(unmaintained) |
sane-epson | |
DX-4050 | USB | 0x04b8/0x082f | Good |
epson
(unmaintained) |
sane-epson | |
DX-5000 | USB | 0x04b8/0x082b | Good |
epson
(unmaintained) |
sane-epson | |
DX-5050 | USB | 0x04b8/0x082b | Good |
epson
(unmaintained) |
sane-epson | |
DX-6000 | USB | 0x04b8/0x082e | Good |
epson
(unmaintained) |
sane-epson | |
DX-7400 | USB | 0x04b8/0x0838 | Good |
epson
(unmaintained) |
sane-epson | |
EP-702A | USB | 0x04b8/0x0850 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
EP-801A | USB Network | 0x04b8/0x0846 | Good | network interface supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
EP-802A | USB | 0x04b8/0x0852 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
EP-901A | USB | 0x04b8/0x0844 | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
EP-901F | USB | 0x04b8/0x0844 | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
EP-902A | USB | 0x04b8/0x0853 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
ES-300C | SCSI parallel | Good | overseas version of the GT-6000 |
epson2 (1.0.124) |
sane-epson2 | |
ES-300C | SCSI Parport | Good | US version of GT-6000 |
epson
(unmaintained) |
sane-epson | |
ES-300GS | SCSI | Good |
epson2 (1.0.124) |
sane-epson2 | ||
ES-300GS | SCSI | Good |
epson
(unmaintained) |
sane-epson | ||
ES-600C | parallel | Good | overseas version of the GT-5400 |
epson2 (1.0.124) |
sane-epson2 | |
ES-600C | Parport | Good | US version of GT-6500 |
epson
(unmaintained) |
sane-epson | |
ES-800C | SCSI | Good | overseas version of the GT-8000 |
epson2 (1.0.124) |
sane-epson2 | |
ES-1000C | ? | Unsupported | overseas version of the GT-8500 |
epson2 (1.0.124) |
sane-epson2 | |
ES-1200C | parallel | Good | overseas version of the GT-9000 |
epson2 (1.0.124) |
sane-epson2 | |
ES-1200C | Parport | Good | US version of GT-9000 |
epson
(unmaintained) |
sane-epson | |
ES-2000 | SCSI USB | 0x04b8/0x0107 | Complete | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
ES-2200 | SCSI USB | 0x04b8/0x010e | Complete | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
ES-6000 | SCSI | Good |
epson2 (1.0.124) |
sane-epson2 | ||
ES-6000H | SCSI | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 | |
ES-6000HS | SCSI | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 | |
ES-7000H | SCSI USB | 0x04b8/0x0126 | Good | network interface unsupported IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
ES-8000 | SCSI | Untested |
epson2 (1.0.124) |
sane-epson2 | ||
ES-8500 | SCSI USB | 0x04b8/0x0109 | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
ES-8500 | SCSI | Good |
epson
(unmaintained) |
sane-epson | ||
ES-9000H | SCSI | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 | |
ES-10000G | USB | 0x04b8/0x0129 | Good | network interface unsupported IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
ES-D400 | USB | 0x04b8/0x0136 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
ES-H300 | USB | 0x04b8/0x012b | Good | network interface probably supported |
epson2 (1.0.124) |
sane-epson2 |
ES-H7200 | USB Ethernet | 0x04b8/0x0138 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Expression 636 | SCSI | Complete | overseas version of the GT-9500 |
epson2 (1.0.124) |
sane-epson2 | |
Expression 636 | SCSI | Complete | US version of GT-9500 |
epson
(unmaintained) |
sane-epson | |
Expression 800 | SCSI | Complete | overseas version of the GT-9600 |
epson2 (1.0.124) |
sane-epson2 | |
Expression 800 | SCSI | Complete |
epson
(unmaintained) |
sane-epson | ||
Expression 836XL | SCSI | Untested | overseas version of the ES-8000 |
epson2 (1.0.124) |
sane-epson2 | |
Expression 1600 | SCSI USB | 0x04b8/0x0107 | Complete | IEEE1394 untested overseas version of the ES-2000 |
epson2 (1.0.124) |
sane-epson2 |
Expression 1600 | SCSI USB IEEE-1394 | 0x04b8/0x0107 | Complete |
epson
(unmaintained) |
sane-epson | |
Expression 1640XL | SCSI USB | 0x04b8/0x0109 | Good | IEEE1394 untested overseas version of the ES-8500 |
epson2 (1.0.124) |
sane-epson2 |
Expression 1680 | SCSI USB | 0x04b8/0x010e | Complete | IEEE1394 untested overseas version of the ES-2200 |
epson2 (1.0.124) |
sane-epson2 |
Expression 1680 | SCSI USB IEEE-1394 | 0x04b8/0x010e | Complete |
epson
(unmaintained) |
sane-epson | |
Expression 1680 Pro | SCSI USB | Untested | IEEE1394 option |
epson2 (1.0.124) |
sane-epson2 | |
Expression 1680XL Pro | SCSI USB | Untested |
epson2 (1.0.124) |
sane-epson2 | ||
Expression 10000XL | USB | 0x04b8/0x0129 | Good | network interface probably supported IEEE1394 untested overseas version of the ES-10000G |
epson2 (1.0.124) |
sane-epson2 |
Expression 10000XL Graphic Arts | USB IEEE1394 | Untested | network interface probably supported |
epson2 (1.0.124) |
sane-epson2 | |
Expression 10000XL Photo | USB IEEE1394 | Untested | network interface probably supported |
epson2 (1.0.124) |
sane-epson2 | |
F-3200 | USB IEEE1394 | 0x04b8/0x080a | Unsupported | Film scanner |
epson2 (1.0.124) |
sane-epson2 |
F-3200 Photo | USB IEEE1394 | Unsupported |
epson2 (1.0.124) |
sane-epson2 | ||
FilmScan 200 | SCSI | Minimal | will be supported |
epson2 (1.0.124) |
sane-epson2 | |
GT-1500 | USB | 0x04b8/0x0133 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-2200 | USB | 0x04b8/0x0102 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
GT-2200 | USB | 0x04b8/0x0102 | Unsupported |
epson2 (1.0.124) |
sane-epson2 | |
GT-2500 | USB | 0x04b8/0x012b | Good | network interface probably supported overseas version of the ES-H300 |
epson2 (1.0.124) |
sane-epson2 |
GT-4000 | ? | Untested |
epson2 (1.0.124) |
sane-epson2 | ||
GT-5000 | parallel SCSI | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-5000 | SCSI Parport | Good |
epson
(unmaintained) |
sane-epson | ||
GT-5400 | parallel | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-5500 | SCSI | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-5500 | SCSI | Good |
epson
(unmaintained) |
sane-epson | ||
GT-6000 | SCSI Parport | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-6000 | SCSI Parport | Good |
epson
(unmaintained) |
sane-epson | ||
GT-6500 | parallel | Good | overseas version of the GT-5400 |
epson2 (1.0.124) |
sane-epson2 | |
GT-6500 | Parport | Good |
epson
(unmaintained) |
sane-epson | ||
GT-6600U | USB | 0x04b8/0x0103 | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-6700U | USB | 0x04b8/0x010c | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-7000 | SCSI | Good |
epson
(unmaintained) |
sane-epson | ||
GT-7000S | SCSI | Complete |
epson2 (1.0.124) |
sane-epson2 | ||
GT-7000U | USB | 0x04b8/0x0101 | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-7200U | USB | 0x04b8/0x010f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-7300U | USB | 0x04b8/0x011d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-7400U | USB | 0x04b8/0x0120 | Unsupported | supported by the snapscan backend |
epson2 (1.0.124) |
sane-epson2 |
GT-7600S | SCSI | Complete | SCSI version of the GT-7600U |
epson2 (1.0.124) |
sane-epson2 | |
GT-7600U | USB | 0x04b8/0x0104 | Complete | USB version of the GT-7600S |
epson2 (1.0.124) |
sane-epson2 |
GT-7600UF | USB | 0x04b8/0x0104 | Complete | GT-7600U with TPU option bundled |
epson2 (1.0.124) |
sane-epson2 |
GT-7700U | USB | 0x04b8/0x010b | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-8000 | SCSI | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-8000 | SCSI | Good |
epson
(unmaintained) |
sane-epson | ||
GT-8200U | USB | 0x04b8/0x0110 | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-8200UF | USB | 0x04b8/0x0110 | Good |
epson2 (1.0.124) |
sane-epson2 | |
GT-8300UF | USB | 0x04b8/0x011e | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-8400UF | USB | 0x04b8/0x011f | Unsupported |
epson2 (1.0.124) |
sane-epson2 | |
GT-8500 | ? | Untested |
epson2 (1.0.124) |
sane-epson2 | ||
GT-8700 | SCSI USB | 0x04b8/0x010a | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-8700F | SCSI USB | 0x04b8/0x010a | Good | GT-8700U with TPU option bundled |
epson2 (1.0.124) |
sane-epson2 |
GT-9000 | parallel | Good |
epson2 (1.0.124) |
sane-epson2 | ||
GT-9300UF | USB | 0x04b8/0x011b | Complete |
epson2 (1.0.124) |
sane-epson2 | |
GT-9400UF | USB | 0x04b8/0x0116 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-9500 | SCSI | Complete |
epson2 (1.0.124) |
sane-epson2 | ||
GT-9600 | SCSI | Complete |
epson2 (1.0.124) |
sane-epson2 | ||
GT-9700F | USB | 0x04b8/0x0112 | Complete | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
GT-9800F | USB | 0x04b8/0x011c | Complete | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
GT-10000 | SCSI | Good | overseas version of the ES-6000 |
epson2 (1.0.124) |
sane-epson2 | |
GT-10000+ | SCSI | Good | IEEE1394 untested overseas version of the ES-6000H |
epson2 (1.0.124) |
sane-epson2 | |
GT-12000 | SCSI | Untested | overseas version of the ES-8000 |
epson2 (1.0.124) |
sane-epson2 | |
GT-15000 | SCSI USB | 0x04b8/0x0126 | Good | IEEE1394 untested overseas version of the ES-7000H |
epson2 (1.0.124) |
sane-epson2 |
GT-20000 | USB Ethernet | 0x04b8/0x0138 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-30000 | SCSI | Good | IEEE1394 untested overseas version of the ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
GT-D1000 | USB | 0x04b8/0x0133 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F500 | USB | 0x04b8/0x0121 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F520 | USB | 0x04b8/0x0122 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F550 | USB | 0x04b8/0x0121 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F570 | USB | 0x04b8/0x0122 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F600 | USB | 0x04b8/0x0118 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F650 | USB | 0x04b8/0x012d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F670 | USB | 0x04b8/0x012e | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F700 | USB | 0x04b8/0x012f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-F720 | USB | 0x04b8/0x0131 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-S50 | USB | 0x04b8/0x0137 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-S80 | USB | 0x04b8/0x0136 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-S600 | USB | 0x04b8/0x012d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-S620 | USB | 0x04b8/0x0131 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-X700 | USB | 0x04b8/0x0128 | Complete | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
GT-X750 | USB | 0x04b8/0x0119 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-X770 | USB | 0x04b8/0x0130 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-X800 | USB | 0x04b8/0x012a | Complete | film area guide mode not supported IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
GT-X820 | USB | 0x04b8/0x013a | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
GT-X900 | USB | 0x04b8/0x012c | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
GT-X970 | USB | 0x04b8/0x0135 | Good | IEEE1394 untested |
epson2 (1.0.124) |
sane-epson2 |
LP-7900CS | ? | Untested | business all-in-one; scanner is a ES-7000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9000CCH | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9000CCS | ? | Untested | business all-in-one; scanner is a ES-7000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9000CFH | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9500CCS | ? | Untested | business all-in-one; scanner is a ES-7000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9500CFH | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9500CH2 | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9800CCH | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9800CCS | ? | Untested | business all-in-one; scanner is a ES-7000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-9800CFH | ? | Untested | business all-in-one; scanner is a ES-9000H |
epson2 (1.0.124) |
sane-epson2 | |
LP-A500 | USB Network | 0x04b8/0x0815 | Good | network interface supported business all-in-one |
epson2 (1.0.124) |
sane-epson2 |
LP-M5000 | USB | 0x04b8/0x0843 | Good | network interface probably supported business all-in-one |
epson2 (1.0.124) |
sane-epson2 |
LP-M5500 | USB | 0x04b8/0x0817 | Good | network interface probably supported business all-in-one |
epson2 (1.0.124) |
sane-epson2 |
LP-M5500F | USB | 0x04b8/0x0817 | Good | network interface probably supported business all-in-one LP-M5500 with the fax option bundled |
epson2 (1.0.124) |
sane-epson2 |
LP-M5600 | USB | 0x04b8/0x0833 | Good | network interface probably supported business all-in-one |
epson2 (1.0.124) |
sane-epson2 |
LP-M6000 | USB | 0x04b8/0x0834 | Good | network interface probably supported business all-in-one |
epson2 (1.0.124) |
sane-epson2 |
ME 200 | USB | 0x04b8/0x0830 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
ME 300 | USB | 0x04b8/0x0841 | Good | all-in-one overseas version of the PX-401A |
epson2 (1.0.124) |
sane-epson2 |
ME OFFICE 510 | USB | 0x04b8/0x084f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
ME Office 600F | USB | 0x04b8/0x0848 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
ME OFFICE 650FN Series | USB | 0x04b8/0x0854 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
ME Office 700FW | USB | 0x04b8/0x0847 | Good | network interface probably supported all-in-one overseas version of the PX-601F |
epson2 (1.0.124) |
sane-epson2 |
Perfection 600 | SCSI | Good | OK, SCSI-ID=EPSON Perfection600 |
umax
(1.0-41) |
sane-umax | |
Perfection 610 | USB | 0x04b8/0x0103 | Complete | overseas version of the GT-6600U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 610 | USB | 0x04b8/0x0103 | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 636 | SCSI | Complete |
epson
(unmaintained) |
sane-epson | ||
Perfection 636S | SCSI | Complete | overseas version of the GT-7000S |
epson2 (1.0.124) |
sane-epson2 | |
Perfection 636S | SCSI | Complete | US version of GT-7000 |
epson
(unmaintained) |
sane-epson | |
Perfection 636U | USB | 0x04b8/0x0101 | Complete | overseas version of the GT-7000U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 636U | USB | 0x04b8/0x0101 | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 640 | USB | 0x04b8/0x010c | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 640U | USB | 0x04b8/0x010c | Complete | overseas version of the GT-6700U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 660 | USB | 0x04b8/0x0114 | Good |
SnapScan
(1.4) |
sane-snapscan | |
Perfection 1200Photo | USB | 0x04b8/0x0104 | Complete | with TPU |
epson
(unmaintained) |
sane-epson |
Perfection 1200S | SCSI | Complete | overseas version of the GT-7600S |
epson2 (1.0.124) |
sane-epson2 | |
Perfection 1200S | SCSI | Complete |
epson
(unmaintained) |
sane-epson | ||
Perfection 1200U | USB | 0x04b8/0x0104 | Complete | overseas version of the GT-7600U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1200U | USB | 0x04b8/0x0104 | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 1200U PHOTO | USB | 0x04b8/0x0104 | Complete | Perfection 1200U with TPU option bundled overseas version of the GT-7600UF |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1240 | SCSI USB | 0x04b8/0x010b | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 1240U | USB | 0x04b8/0x010b | Complete | overseas version of the GT-7700U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1250 | USB | 0x04b8/0x010f | Complete |
plustek
(0.52) |
sane-plustek | |
Perfection 1250 PHOTO | USB | 0x04b8/0x010f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1250Photo | USB | 0x04b8/0x010f | Good | TPA scans not perfect |
plustek
(0.52) |
sane-plustek |
Perfection 1260 | USB | 0x04b8/0x011d | Complete |
plustek
(0.52) |
sane-plustek | |
Perfection 1260 PHOTO | USB | 0x04b8/0x011d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1260Photo | USB | 0x04b8/0x011d | Good | TPA scans not perfect |
plustek
(0.52) |
sane-plustek |
Perfection 1270 | USB | 0x04b8/0x0120 | Good |
SnapScan
(1.4) |
sane-snapscan | |
Perfection 1600 | SCSI | Unsupported |
epson2 (1.0.124) |
sane-epson2 | ||
Perfection 1640 | SCSI USB | 0x04b8/0x010a | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 1640SU | SCSI USB | 0x04b8/0x010a | Complete | overseas version of the GT-8700 |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1640SU PHOTO | SCSI USB | 0x04b8/0x010a | Good | overseas version of the GT-8700F |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1650 | USB | 0x04b8/0x0110 | Complete | overseas version of the GT-8200U |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1650 | USB | 0x04b8/0x0110 | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 1650 PHOTO | USB | 0x04b8/0x0110 | Good | overseas version of the GT-8200UF |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1660 | USB | 0x04b8/0x011e | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 1660 PHOTO | USB | 0x04b8/0x011e | Complete | overseas version of the GT-8300UF |
epson2 (1.0.124) |
sane-epson2 |
Perfection 1670 | USB | 0x04b8/0x011f | Good |
SnapScan
(1.4) |
sane-snapscan | |
Perfection 1670 PHOTO | USB | 0x04b8/0x011f | Unsupported | supported by the snapscan backend overseas version of the GT-8400UF |
epson2 (1.0.124) |
sane-epson2 |
Perfection 2400 | USB | 0x04b8/0x011b | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 2400 PHOTO | USB | 0x04b8/0x011b | Complete | overseas version of the GT-9300UF |
epson2 (1.0.124) |
sane-epson2 |
Perfection 2450 | USB IEEE-1394 | 0x04b8/0x0112 | Complete |
epson
(unmaintained) |
sane-epson | |
Perfection 2450 PHOTO | USB IEEE-1394 | 0x04b8/0x0112 | Complete | overseas version of the GT-9700F |
epson2 (1.0.124) |
sane-epson2 |
Perfection 2480 | USB | 0x04b8/0x0121 | Good |
SnapScan
(1.4) |
sane-snapscan | |
Perfection 2480 PHOTO | USB | 0x04b8/0x0121 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 2580 | USB | 0x04b8/0x0121 | Basic | Film scanning unit unsupported |
SnapScan
(1.4) |
sane-snapscan |
Perfection 2580 PHOTO | USB | 0x04b8/0x0121 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 3170 PHOTO | USB | 0x04b8/0x0116 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 3200 | USB IEEE-1394 | 0x04b8/0x011c | Complete | US version of the GT-9800 |
epson
(unmaintained) |
sane-epson |
Perfection 3200 PHOTO | USB IEEE-1394 | 0x04b8/0x011c | Complete | overseas version of the GT-9800F |
epson2 (1.0.124) |
sane-epson2 |
Perfection 3490 | USB | 0x04b8/0x0122 | Good |
SnapScan
(1.4) |
sane-snapscan | |
Perfection 3490 PHOTO | USB | 0x04b8/0x0122 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 3590 | USB | 0x04b8/0x0122 | Basic | Film scanning unit unsupported |
SnapScan
(1.4) |
sane-snapscan |
Perfection 3590 PHOTO | USB | 0x04b8/0x0122 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 4180 PHOTO | USB | 0x04b8/0x0118 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 4490 PHOTO | USB | 0x04b8/0x0119 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection 4870 | USB | 0x04b8/0x0128 | Complete | US version of the GT-X700 |
epson
(unmaintained) |
sane-epson |
Perfection 4870 PHOTO | USB | 0x04b8/0x0128 | Complete | IEEE1394 untested overseas version of the GT-X700 |
epson2 (1.0.124) |
sane-epson2 |
Perfection 4990 | USB | 0x04b8/0x012a | Complete | US version of the GT-X800 |
epson
(unmaintained) |
sane-epson |
Perfection 4990 PHOTO | USB | 0x04b8/0x012a | Good | film area guide mode not supported IEEE1394 untested overseas version of the GT-X800 |
epson2 (1.0.124) |
sane-epson2 |
Perfection 4990 Pro | USB IEEE1394 | Untested | seems to be a 4990 PHOTO with additional software |
epson2 (1.0.124) |
sane-epson2 | |
Perfection V10 | USB | 0x04b8/0x012d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V30 | USB | 0x04b8/0x0131 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V100 Photo | USB | 0x04b8/0x012d | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V200 Photo | USB | 0x04b8/0x012e | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V300 Photo | USB | 0x04b8/0x0131 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V350 Photo | USB | 0x04b8/0x012f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V500 Photo | USB | 0x04b8/0x0130 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V600 Photo | USB | 0x04b8/0x013a | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Perfection V700 Photo | USB | 0x04b8/0x012c | Good | IEEE1394 untested overseas version of the GT-X900 |
epson2 (1.0.124) |
sane-epson2 |
Perfection V750 Photo | USB | 0x04b8/0x012c | Good | IEEE1394 untested overseas version of the GT-X900 |
epson2 (1.0.124) |
sane-epson2 |
PM-A700 | USB | 0x04b8/0x0814 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A750 | USB | 0x04b8/0x081a | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A820 | USB | 0x04b8/0x0827 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A840 | USB | 0x04b8/0x083c | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A840S | USB | 0x04b8/0x083c | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A850 | USB | 0x04b8/0x0806 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A870 | USB | 0x04b8/0x0811 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A890 | USB | 0x04b8/0x081c | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A900 | USB | 0x04b8/0x0810 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A920 | USB | 0x04b8/0x082a | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A940 | USB | 0x04b8/0x0837 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A950 | USB | 0x04b8/0x081d | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-A970 | USB | 0x04b8/0x0828 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-T960 | USB | 0x04b8/0x0836 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PM-T990 | USB | 0x04b8/0x0829 | Good | all-in-one PM-A970 with network interface |
epson2 (1.0.124) |
sane-epson2 |
PX-401A | USB | 0x04b8/0x0841 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-402A | USB | 0x04b8/0x084d | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-501A | USB | 0x04b8/0x084a | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-502A | USB | 0x04b8/0x0856 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-601F | USB | 0x04b8/0x0847 | Good | network interface probably supported |
epson2 (1.0.124) |
sane-epson2 |
PX-A550 | USB | 0x04b8/0x080e | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-A620 | USB | 0x04b8/0x082f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-A640 | USB | 0x04b8/0x0838 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-A650 | USB | 0x04b8/0x0819 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-A720 | USB | 0x04b8/0x082e | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-A740 | USB | 0x04b8/0x0839 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
PX-FA700 | USB | 0x04b8/0x083a | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
RX-425 | USB | 0x04b8/0x080f | Good |
epson
(unmaintained) |
sane-epson | |
RX-500 | USB | 0x04b8/0x0807 | Good |
epson
(unmaintained) |
sane-epson | |
RX-600 | USB | 0x04b8/0x0806 | Good |
epson
(unmaintained) |
sane-epson | |
RX-620 | USB | 0x04b8/0x0811 | Good |
epson
(unmaintained) |
sane-epson | |
RX-700 | USB | 0x04b8/0x0810 | Good |
epson
(unmaintained) |
sane-epson | |
Stylus CX-1500 | USB | 0x04b8/0x080c | Good |
SnapScan
(1.4) |
sane-snapscan | |
Stylus CX-5800 | USB | Unsupported | Probably unsupported at the moment. Not compatible to snapscan backend. It's not known if it may work with epson or epkowa backend. |
unsupported
(2010-06-09) |
? | |
Stylus CX1500 | USB | 0x04b8/0x080c | Unsupported | supported by the snapscan backend all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX2800 | USB | 0x04b8/0x0830 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX2900 | USB | 0x04b8/0x0830 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3100 | USB | 0x04b8/0x0802 | Good | all-in-one overseas version of the CC-570L |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3200 | USB | 0x04b8/0x0802 | Good | all-in-one overseas version of the CC-570L |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3500 | USB | 0x04b8/0x080e | Good | all-in-one overseas version of the PX-A550 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3600 | USB | 0x04b8/0x080e | Good | all-in-one overseas version of the PX-A550 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3650 | USB | 0x04b8/0x080e | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3700 | USB | 0x04b8/0x0818 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3800 | USB | 0x04b8/0x0818 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX3810 | USB | Untested | all-in-one |
epson2 (1.0.124) |
sane-epson2 | |
Stylus CX3900 | USB | 0x04b8/0x082f | Good | all-in-one overseas version of the PX-A620 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4100 | USB | 0x04b8/0x0820 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4200 | USB | 0x04b8/0x0820 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4300 | USB | 0x04b8/0x083f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4400 | USB | 0x04b8/0x083f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4500 | USB | 0x04b8/0x080d | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4600 | USB | 0x04b8/0x080d | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4700 | USB | 0x04b8/0x0819 | Good | all-in-one overseas version of the PX-A650 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4800 | USB | 0x04b8/0x0819 | Good | all-in-one overseas version of the PX-A650 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX4900 | USB | 0x04b8/0x082b | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5000 | USB | 0x04b8/0x082b | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5100 | USB | 0x04b8/0x0801 | Good | all-in-one overseas version of the CC-600PX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5200 | USB | 0x04b8/0x0801 | Good | all-in-one overseas version of the CC-600PX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5300 | USB | 0x04b8/0x0808 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5400 | USB | 0x04b8/0x0808 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5500 | USB | 0x04b8/0x083f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5600 | USB | 0x04b8/0x083f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5700F | USB | 0x04b8/0x0821 | Unsupported | may work with the snapscan backend all-in-one with FAX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5800F | USB | 0x04b8/0x0821 | Unsupported | may work with the snapscan backend all-in-one with FAX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX5900 | USB | 0x04b8/0x082e | Good | all-in-one overseas version of the PX-A720 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6000 | USB | 0x04b8/0x082e | Good | all-in-one overseas version of the PX-A720 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6300 | USB | 0x04b8/0x0805 | Good | all-in-one mistakenly thinks its a PX-A650 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6400 | USB | 0x04b8/0x0805 | Good | all-in-one mistakenly thinks its a PX-A650 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6500 | USB | 0x04b8/0x0813 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6600 | USB | 0x04b8/0x0813 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX6900F | USB | 0x04b8/0x0831 | Unsupported | may work with the snapscan backend all-in-one with FAX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX7000F | USB | 0x04b8/0x0831 | Unsupported | may work with the snapscan backend all-in-one with FAX |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX7300 | USB | 0x04b8/0x0838 | Good | all-in-one overseas version of the PX-A640 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX7400 | USB | 0x04b8/0x0838 | Good | all-in-one overseas version of the PX-A640 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX7700 | USB | 0x04b8/0x081f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX7800 | USB | 0x04b8/0x081f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX8300 | USB | 0x04b8/0x0839 | Good | all-in-one overseas version of the PX-A740 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX8400 | USB | 0x04b8/0x0839 | Good | all-in-one overseas version of the PX-A740 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX9300F | USB | 0x04b8/0x083a | Good | all-in-one overseas version of the PX-FA700 |
epson2 (1.0.124) |
sane-epson2 |
Stylus CX9400Fax | USB | 0x04b8/0x083a | Good | all-in-one overseas version of the PX-FA700 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX3800 | USB | 0x04b8/0x0818 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX3850 | USB | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 | |
Stylus DX4000 | USB | 0x04b8/0x082f | Good | all-in-one overseas version of the PX-A620 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX4200 | USB | 0x04b8/0x0820 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX4400 | USB | 0x04b8/0x083f | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX4450 | USB | 0x04b8/0x083f | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Stylus DX4800 | USB | 0x04b8/0x0819 | Good | all-in-one overseas version of the PX-A650 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX4850 | USB | 0x04b8/0x0819 | Good | all-in-one DX4800 + card reader |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX5000 | USB | 0x04b8/0x082b | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX6000 | USB | 0x04b8/0x082e | Good | all-in-one overseas version of the PX-A720 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX7000F | USB | 0x04b8/0x0831 | Unsupported | may work with the snapscan backend all-in-one with FAX |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX7400 | USB | 0x04b8/0x0838 | Good | all-in-one overseas version of the PX-A640 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX8400 | USB | 0x04b8/0x0839 | Good | all-in-one overseas version of the PX-A740 |
epson2 (1.0.124) |
sane-epson2 |
Stylus DX9400F | USB | 0x04b8/0x083a | Good | all-in-one overseas version of the PX-FA700 |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX100 | USB | 0x04b8/0x0841 | Good | all-in-one overseas version of the PX-401A |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX110 Series | USB | 0x04b8/0x084d | Good | all-in-one overseas version of the PX-402A |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX200 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX210 Series | USB | 0x04b8/0x084f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX300 | USB | 0x04b8/0x0848 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX400 | USB | 0x04b8/0x084a | Good | network interface probably supported all-in-one overseas version of the PX-501A |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX410 Series | USB | 0x04b8/0x0851 | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus NX510 Series | USB | 0x04b8/0x0856 | Good | all-in-one overseas version of the PX-502A |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office BX300F | USB | 0x04b8/0x0848 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office BX310FN Series | USB | 0x04b8/0x0854 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office BX600FW | USB | 0x04b8/0x0847 | Good | network interface probably supported all-in-one overseas version of the PX-601F |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office BX610FW Series | USB | 0x04b8/0x0855 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office TX300F | USB | 0x04b8/0x0848 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office TX510FN Series | USB | 0x04b8/0x0854 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office TX600FW | USB | 0x04b8/0x0847 | Good | network interface probably supported all-in-one overseas version of the PX-601F |
epson2 (1.0.124) |
sane-epson2 |
Stylus Office TX610FW Series | USB | 0x04b8/0x0855 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo PX650 Series | USB | 0x04b8/0x0850 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo PX700W | USB Network | 0x04b8/0x0846 | Good | network interface supported all-in-one overseas version of the EP-801A |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo PX710W Series | USB | 0x04b8/0x0852 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo PX800FW | USB | 0x04b8/0x0844 | Good | network interface probably supported all-in-one overseas version of the EP-901A |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo PX810FW Series | USB | 0x04b8/0x0853 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX420 | USB | 0x04b8/0x080f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX425 | USB | 0x04b8/0x080f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX430 | USB | 0x04b8/0x080f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX500 | USB | 0x04b8/0x0807 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX510 | USB | 0x04b8/0x0807 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX520 | USB | 0x04b8/0x081a | Good | all-in-one overseas version of the PM-A750 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX530 | USB | 0x04b8/0x081a | Good | all-in-one overseas version of the PM-A750 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX560 | USB | 0x04b8/0x0827 | Good | all-in-one overseas version of the PM-A820 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX580 | USB | 0x04b8/0x0827 | Good | all-in-one overseas version of the PM-A820 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX585 | USB | 0x04b8/0x083c | Good | all-in-one overseas version of the PM-A840 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX590 | USB | 0x04b8/0x0827 | Good | all-in-one overseas version of the PM-A820 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX595 | USB | 0x04b8/0x083c | Good | all-in-one overseas version of the PM-A840 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX600 | USB | 0x04b8/0x0806 | Good | all-in-one overseas version of the PM-A850 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX610 | USB | 0x04b8/0x083c | Good | all-in-one overseas version of the PM-A840 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX620 | USB | 0x04b8/0x0811 | Good | all-in-one overseas version of the PM-A870 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX630 | USB | 0x04b8/0x0811 | Good | all-in-one overseas version of the PM-A870 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX640 | USB | 0x04b8/0x081c | Good | all-in-one overseas version of the PM-A890 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX650 | USB | 0x04b8/0x081c | Good | all-in-one overseas version of the PM-A890 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX680 | USB | 0x04b8/0x0837 | Good | all-in-one overseas version of the PM-A940 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX685 | USB | 0x04b8/0x0837 | Good | all-in-one overseas version of the PM-A940 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX690 | USB | 0x04b8/0x0837 | Good | all-in-one overseas version of the PM-A940 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo RX700 | USB | 0x04b8/0x0810 | Good | all-in-one overseas version of the PM-A900 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo TX650 Series | USB | 0x04b8/0x0850 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo TX700W | USB | 0x04b8/0x0846 | Good | network interface probably supported all-in-one overseas version of the EP-801A |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo TX710W Series | USB | 0x04b8/0x0852 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus Photo TX800FW | USB | 0x04b8/0x0844 | Good | network interface probably supported all-in-one overseas version of the EP-901A |
epson2 (1.0.124) |
sane-epson2 |
Stylus Scan 2000 | USB | 0x04b8/0x0105 | Untested | apparently mostly the same as the Stylus Scan 2500 |
epson2 (1.0.124) |
sane-epson2 |
Stylus Scan 2500 | USB | 0x04b8/0x0106 | Untested | scanner is apparently a GT-7000 |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX100 | USB | 0x04b8/0x0841 | Good | all-in-one overseas version of the PX-401A |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX110 Series | USB | 0x04b8/0x084d | Good | all-in-one overseas version of the PX-402A |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX125 | USB | 0x04b8/0x085c | Untested | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX200 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX205 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX210 Series | USB | 0x04b8/0x084f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX400 | USB | 0x04b8/0x084a | Good | network interface probably supported all-in-one overseas version of the PX-501A |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX405 | USB | 0x04b8/0x084a | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX410 Series | USB | 0x04b8/0x0851 | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX510W Series | USB | 0x04b8/0x0856 | Good | all-in-one overseas version of the PX-502A |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX600FW | USB | 0x04b8/0x0847 | Good | network interface probably supported all-in-one overseas version of the PX-601F |
epson2 (1.0.124) |
sane-epson2 |
Stylus SX610FW Series | USB | 0x04b8/0x0855 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX100 | USB | 0x04b8/0x0841 | Good | all-in-one overseas version of the PX-401A |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX110 Series | USB | 0x04b8/0x084d | Good | all-in-one overseas version of the PX-402A |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX200 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX203 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX209 | USB | 0x04b8/0x0849 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX210 Series | USB | 0x04b8/0x084f | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX400 | USB | 0x04b8/0x084a | Good | network interface probably supported all-in-one overseas version of the PX-501A |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX410 Series | USB | 0x04b8/0x0851 | Good | network interface probably supported all-in-one |
epson2 (1.0.124) |
sane-epson2 |
Stylus TX550W Series | USB | 0x04b8/0x0856 | Good | all-in-one overseas version of the PX-502A |
epson2 (1.0.124) |
sane-epson2 |
StylusScan 2000 | USB | 0x04b8/0x0105 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
V700 | USB IEEE-1394 | 0x04b8/0x012c | Good |
epson
(unmaintained) |
sane-epson | |
V750 | USB IEEE-1394 | 0x04b8/0x012c | Good |
epson
(unmaintained) |
sane-epson | |
WorkForce 310 Series | USB | 0x04b8/0x0854 | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
WorkForce 500 | USB | 0x04b8/0x084c | Good | all-in-one |
epson2 (1.0.124) |
sane-epson2 |
WorkForce 600 | USB | 0x04b8/0x0847 | Good | network interface probably supported all-in-one overseas version of the PX-601F |
epson2 (1.0.124) |
sane-epson2 |
WorkForce 610 Series | USB | 0x04b8/0x0855 | Unsupported | supported by the epkowa backend plus non-free interpreter |
epson2 (1.0.124) |
sane-epson2 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Image Scanner 256 | SCSI | Good | OK, SCSI-ID=UMAX UG 80 |
umax
(1.0-41) |
sane-umax |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Galleria 600 | SCSI | Untested | untested, SCSI-ID=ESCORT Galleria 600S |
umax
(1.0-41) |
sane-umax |
Link(s):
http://www.fujitsu.com, http://www.fujitsu.com/, http://www.fcpa.fujitsu.com/products/scanners/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
1200CUS | USB | 0x05d8/0x4002 | Basic | Works, but is slow. Probably a Mustek BearPaw 2400 CU clone. |
gt68xx
(1.0-84) |
sane-gt68xx |
fi-60F | USB | 0x04c5/0x10c7 | Basic | A6-size flatbed, 300/600 dpi, color/gray/binary |
epjitsu
(20) |
sane-epjitsu |
fi-4010CU | USB | 0x04c5/0x1029 | Untested |
avision
(Build: 296) |
sane-avision | |
fi-4110EOX/2/3 | USB | 0x04c5/0x1040 | Unsupported | Uses ma1509 chip, but very different from other scanners supported by the ma1509 backend |
ma1509
(1.0-3) |
sane-ma1509 |
fi-4120C | SCSI USB | 0x04c5/0x1041 | Complete | small, recent, discontinued, usb 1.1 |
fujitsu
(117) |
sane-fujitsu |
fi-4120C2 | SCSI USB | 0x04c5/0x10ae | Complete | small, recent, discontinued, usb 2.0 |
fujitsu
(117) |
sane-fujitsu |
fi-4220C | SCSI USB | 0x04c5/0x1042 | Complete | small, recent, discontinued, usb 1.1 |
fujitsu
(117) |
sane-fujitsu |
fi-4220C2 | SCSI USB | 0x04c5/0x10af | Complete | small, recent, discontinued, usb 2.0 |
fujitsu
(117) |
sane-fujitsu |
fi-4340C | SCSI USB | 0x04c5/0x10cf | Complete | medium, current |
fujitsu
(117) |
sane-fujitsu |
fi-4530C | SCSI USB | 0x04c5/0x1078 | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-4640S | SCSI | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-4750C | SCSI | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-4750L | SCSI | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-4860C | SCSI | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-4860C2 | SCSI | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-4990C | SCSI | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu | |
fi-5000N | Ethernet | Untested | Not a scanner, rather a scanner to ethernet interface |
fujitsu
(117) |
sane-fujitsu | |
fi-5015C | USB | 0x04c5/0x10ef | Good |
avision
(Build: 296) |
sane-avision | |
fi-5110C | USB | 0x04c5/0x1097 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5110EOX/2 | USB | 0x04c5/0x1096 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5110EOX3 | USB | 0x04c5/0x10e6 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5110EOXM | USB | 0x04c5/0x10f2 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5120C | SCSI USB | 0x04c5/0x10e0 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5220C | SCSI USB | 0x04c5/0x10e1 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5530C | SCSI USB | 0x04c5/0x10e2 | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5530C2 | SCSI USB | 0x04c5/0x114a | Complete | medium, current |
fujitsu
(117) |
sane-fujitsu |
fi-5650C | SCSI USB | 0x04c5/0x10ad | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5750C | SCSI USB | 0x04c5/0x1095 | Complete | big, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-5900C | SCSI USB | 0x04c5/0x10e7 | Good | big, recent, discontinued. Independent ultrasonic control and multistream unsupported |
fujitsu
(117) |
sane-fujitsu |
fi-5950 | SCSI USB | 0x04c5/0x1213 | Untested | big, current. Faster version of fi-5900? |
fujitsu
(117) |
sane-fujitsu |
fi-6000NS | Ethernet | Untested | small, recent, discontinued, integrated touchscreen and keyboard |
fujitsu
(117) |
sane-fujitsu | |
fi-6110 | USB | 0x04c5/0x11fc | Complete | small, current |
fujitsu
(117) |
sane-fujitsu |
fi-6130 | USB | 0x04c5/0x114f | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-6130Z | USB | 0x04c5/0x11f3 | Complete | small, current |
fujitsu
(117) |
sane-fujitsu |
fi-6140 | SCSI USB | 0x04c5/0x114d | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-6140Z | SCSI USB | 0x04c5/0x11f1 | Complete | medium, current |
fujitsu
(117) |
sane-fujitsu |
fi-6230 | USB | 0x04c5/0x1150 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-6230Z | USB | 0x04c5/0x11f4 | Complete | small, current |
fujitsu
(117) |
sane-fujitsu |
fi-6240 | SCSI USB | 0x04c5/0x114e | Complete | medium, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-6240Z | SCSI USB | 0x04c5/0x11f2 | Complete | medium, current |
fujitsu
(117) |
sane-fujitsu |
fi-6670 | SCSI USB | 0x04c5/0x1176 | Good | big, current, won't wakeup via software |
fujitsu
(117) |
sane-fujitsu |
fi-6670A | SCSI USB | 0x04c5/0x1177 | Good | big, current, VRS CGA board unsupported, won't wakeup via software |
fujitsu
(117) |
sane-fujitsu |
fi-6750S | USB | 0x04c5/0x1178 | Untested | Simplex, USB only version of fi-6770, won't wakeup via software, discontinued |
fujitsu
(117) |
sane-fujitsu |
fi-6770 | SCSI USB | 0x04c5/0x1174 | Good | big, current, won't wakeup via software |
fujitsu
(117) |
sane-fujitsu |
fi-6770A | SCSI USB | 0x04c5/0x1175 | Good | big, current, VRS CGA board unsupported, won't wakeup via software |
fujitsu
(117) |
sane-fujitsu |
fi-6800 | SCSI USB | 0x04c5/0x119d | Untested | big, current. Independent ultrasonic control and multistream unsupported |
fujitsu
(117) |
sane-fujitsu |
fi-6800-CGA | SCSI USB | 0x04c5/0x119e | Untested | big, current. VRS CGA board unsupported, Independent ultrasonic control and multistream unsupported |
fujitsu
(117) |
sane-fujitsu |
M3091DC | SCSI | Complete | small, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3092DC | SCSI | Complete | small, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3093DE | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3093DG | SCSI | Complete | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3093E | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3093EX | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3093GX | SCSI | Complete | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3096EX | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3096GX | SCSI | Complete | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3097DE | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3097DG | SCSI | Complete | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3097E+ | RS232C/Video | Unsupported | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3097G+ | SCSI | Complete | medium, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099A | RS232C/Video | Unsupported | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099EH | RS232C/Video | Unsupported | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099EX | RS232C/Video | Unsupported | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099G | SCSI | Complete | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099GH | SCSI | Complete | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M3099GX | SCSI | Complete | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M4097D | SCSI | Complete | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
M4099D | SCSI | Complete | big, old, discontinued |
fujitsu
(117) |
sane-fujitsu | |
ScanPartner | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
ScanPartner 10 | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
ScanPartner 10C | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
ScanPartner 15C | SCSI | Good |
sp15c (unmaintained) |
sane-sp15c | ||
ScanPartner 300C | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
ScanPartner 600C | SCSI | Good |
sp15c (unmaintained) |
sane-sp15c | ||
ScanPartner 620C | SCSI | Good |
avision
(Build: 296) |
sane-avision | ||
ScanPartner Jr | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
ScanSnap fi-6010N | Ethernet | Untested | small, current, integrated touchscreen and keyboard |
fujitsu
(117) |
sane-fujitsu | |
ScanSnap iX500 | USB WiFi | 0x04c5/0x132b | Good | small, current, WiFi not supported. Hardware only scans in color. Backend generates binary and grayscale modes. |
fujitsu
(117) |
sane-fujitsu |
ScanSnap N1800 | Ethernet | Untested | small, current, integrated touchscreen and keyboard |
fujitsu
(117) |
sane-fujitsu | |
ScanSnap S300 | USB | 0x04c5/0x1156 | Good | Duplex, 150/225/300/600 dpi, color/gray/binary, AC/USB power, buttons/sensors all supported. Scanner always scans in _triplex_ color, fast USB required. |
epjitsu
(20) |
sane-epjitsu |
ScanSnap S300M | USB | 0x04c5/0x117f | Good | Same as S300, with different usb id |
epjitsu
(20) |
sane-epjitsu |
ScanSnap S500 | USB | 0x04c5/0x10fe | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
ScanSnap S500M | USB | 0x04c5/0x1135 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
ScanSnap S510 | USB | 0x04c5/0x1155 | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
ScanSnap S510M | USB | 0x04c5/0x116f | Complete | small, recent, discontinued |
fujitsu
(117) |
sane-fujitsu |
ScanSnap S1100 | USB | 0x04c5/0x1200 | Unsupported | Beta version of backend source available, which works well, but breaks support for other epjitsu scanners. See http://ubuntuforums.org/showthread.php?t=1678335 |
epjitsu
(20) |
sane-epjitsu |
ScanSnap S1300 | USB | 0x04c5/0x11ed | Good | Same as S300, with different usb id |
epjitsu
(20) |
sane-epjitsu |
ScanSnap S1500 | USB | 0x04c5/0x11a2 | Complete | small, discontinued |
fujitsu
(117) |
sane-fujitsu |
ScanSnap S1500M | USB | 0x04c5/0x11a2 | Complete | small, discontinued, same as S1500 |
fujitsu
(117) |
sane-fujitsu |
ScanStation | SCSI | Untested |
avision
(Build: 296) |
sane-avision |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
4800 | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.genius-kye.com/, http://www.geniusmouse.co.uk/, http://www.geniusnet.com.tw/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
ColorPage CS | SCSI | Unsupported | Probably unsupported, see link for details. |
unsupported
(2010-06-09) |
? | |
ColorPage HR6 V1 | USB | 0x0458/0x2004 | Basic |
u12
(0.02) |
sane-u12 | |
Colorpage HR6 V2 | USB | 0x0458/0x2008 | Complete |
plustek
(0.52) |
sane-plustek | |
Colorpage HR6 V2 | USB | 0x0458/0x2007 | Complete |
plustek
(0.52) |
sane-plustek | |
Colorpage HR6A | USB | 0x0458/0x2009 | Untested |
plustek
(0.52) |
sane-plustek | |
Colorpage HR6X | USB | 0x0458/0x2016 | Untested |
plustek
(0.52) |
sane-plustek | |
Colorpage HR6X EPP | Parport (SPP, EPP) | Good | Negative scanning does not work correctly |
plustek_pp
(0.43) |
sane-plustek_pp | |
ColorPage HR6X Slim | USB | 0x0458/0x2019 | Unsupported | GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
Colorpage HR7 | USB | 0x0458/0x2013 | Complete |
plustek
(0.52) |
sane-plustek | |
Colorpage HR7LE | USB | 0x0458/0x2015 | Untested |
plustek
(0.52) |
sane-plustek | |
ColorPage HR7X | USB | 0x0458/0x2018 | Unsupported | GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
ColorPage HR7XE | USB | 0x06dc/0x0012 | Unsupported | Unsuported. See link for details. |
unsupported
(2010-06-09) |
? |
ColorPage HR8 | USB | 0x0458/0x201c | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
Colorpage SF600 | USB | 0x0458/0x2021 | Basic |
gt68xx
(1.0-84) |
sane-gt68xx | |
ColorPage Slim 1200 | USB | 0x0458/0x201e | Untested | Untested but should work. |
gt68xx
(1.0-84) |
sane-gt68xx |
Colorpage Vivid 1200 X | USB | 0x0458/0x201d | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
Colorpage Vivid 1200 XE | USB | 0x0458/0x201f | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
ColorPage Vivid III USB | USB | 0x07b3/0x0001 | Untested | Note: Device has Plustek vendor and product ID (0x07b3/0x0001) |
u12
(0.02) |
sane-u12 |
Colorpage Vivid III V2 | Parport (SPP, EPP) | Complete | Reported as PT12 |
plustek_pp
(0.43) |
sane-plustek_pp | |
Colorpage Vivid Pro II Film | Parport (SPP, EPP) | Complete | Reported as OP9636T/12000T |
plustek_pp
(0.43) |
sane-plustek_pp | |
Colorpage Vivid3 V2 | USB | 0x0458/0x2011 | Good | Same as Colorpage Vivid3x |
gt68xx
(1.0-84) |
sane-gt68xx |
Colorpage Vivid3x | USB | 0x0458/0x2011 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
Colorpage Vivid3xe | USB | 0x0458/0x2017 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
Colorpage Vivid4 | USB | 0x0458/0x2014 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
Colorpage Vivid4x | USB | 0x0458/0x201b | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
Colorpage Vivid4xe | USB | 0x0458/0x201a | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
ColorPage-EP | Parport | Good |
microtek2
(unmaintained) |
sane-microtek2 | ||
ColorPage-HR5 (Pro) | SCSI | Good | OK, SCSI-ID=KYE ColorPage-HR5 |
umax
(1.0-41) |
sane-umax | |
ColorPage-Life Pro | Parport (EPP/ECP) | Good | works (relabelled 1220P and 2000P) |
umax_pp
(1) |
sane-umax_pp | |
ColorPage-Slim 1200 USB2 | USB | 0x0458/0x2020 | Unsupported | GL841 based, to be added to genesys backend. |
unsupported
(2010-06-09) |
? |
Colorpage-SP2 | SCSI | Good | Same as Microtek Scanmaker E3 |
microtek
(0.13.1) |
sane-microtek | |
FS-1130 Colorpage Scanner | SCSI | Good |
leo
(1.0-10) |
sane-leo |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
2000 | USB | 0x05d8/0x4002 | Good | Same as Artec Ultima 2000. |
gt68xx
(1.0-84) |
sane-gt68xx |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Maxi Scan A4 Parallel 36 bit | Parport | Unsupported | Probably unsupported. Identical to the Benq Prisa 620P. |
unsupported
(2010-06-09) |
? | |
SCAN@HOME 48 USB | USB | 0x080d/0x0102 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.guillemot.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Maxi A4 36 bit | USB | 0x04a5/0x2060 | Good | Rebadged Benq 620U, needs Benq firmware file u96v???.bin |
SnapScan
(1.4) |
sane-snapscan |
Maxi Scan A4 Deluxe (SCSI) | SCSI | Good | Rebadged SnapScan 310s. |
SnapScan
(1.4) |
sane-snapscan | |
Maxi Scan A4 USB 640U | USB | 0x04a5/0x2060 | Good | Rebadged Benq 640U. |
SnapScan
(1.4) |
sane-snapscan |
Scan@home Touch 1248 (USB) | USB | 0x04a5/0x20de | Good | Rebadged Benq 3300. |
SnapScan
(1.4) |
sane-snapscan |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
SCAN@HOME 48 USB | USB | 0x080d/0x0102 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.hp.com, http://www.hp.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
LaserJet M1005 MFP | USB | 0x03f0/0x3b17 | Good | grayscale/color (24 bit), 75/100/150/200/300/600/1200 DPI |
hpljm1005 (0) |
sane-hpljm1005 |
LaserJet M1120 MFP | USB | 0x03f0/0x5617 | Good | grayscale/color (24 bit), 75/100/150/200/300/600/1200 DPI |
hpljm1005 (0) |
sane-hpljm1005 |
LaserJet M1120n MFP | USB | 0x03f0/0x5717 | Good | grayscale/color (24 bit), 75/100/150/200/300/600/1200 DPI |
hpljm1005 (0) |
sane-hpljm1005 |
Photo Scanner 1000 | USB | 0x03f0/0x1001 | Unsupported | Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for device data. |
unsupported
(2010-06-09) |
? |
Photosmart 1200 Photo | USB | Unsupported | Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000? |
unsupported
(2010-06-09) |
? | |
Photosmart C3180 | USB | 0x03f0/0x5611 | Unsupported | Not supported yet by SANE. See link for details. |
unsupported
(2010-06-09) |
? |
Photosmart C5100 series | USB | 0x03f0/0x5811 | Unsupported | Not supported yet by SANE. See link for details. |
unsupported
(2010-06-09) |
? |
PhotoSmart PhotoScanner | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
Photosmart S20 (C5101A) | USB | 0x03f0/0x0102 | Unsupported | Not supported yet by SANE. See link for details. |
unsupported
(2010-06-09) |
? |
Photosmart S20xi (C7150A) | USB | 0x03f0/0x0102 | Unsupported | Not supported yet by SANE. See link for details. |
unsupported
(2010-06-09) |
? |
ScanJet 3c | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 3p | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 4c | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 4p | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 5p | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 5s | Parport (EPP) | Minimal | Requires libieee1284 library. Only gray mode. |
hpsj5s
(0.03) |
sane-hpsj5s | |
ScanJet 2100C | USB | 0x03f0/0x0505 | Complete |
plustek
(0.52) |
sane-plustek | |
ScanJet 2200C | USB | 0x03f0/0x0605 | Complete |
plustek
(0.52) |
sane-plustek | |
ScanJet 2300C | USB | 0x03f0/0x0901 | Complete | 600x1200 dpi max |
genesys
(1.0-63) |
sane-genesys |
ScanJet 2400C | USB | 0x03f0/0x0a01 | Complete | 1200x1200 dpi max |
genesys
(1.0-63) |
sane-genesys |
Scanjet 3200C | Parport (EPP/ECP) | Good | works (relabelled 1220P and 2000P) |
umax_pp
(1) |
sane-umax_pp | |
ScanJet 3300c | USB | 0x03f0/0x0205 | Complete |
niash
(0.3) |
sane-niash | |
ScanJet 3400c | USB | 0x03f0/0x0405 | Complete | If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
(0.3) |
sane-niash |
ScanJet 3500C | USB | 0x03f0/0x2205 | Good |
hp3500
(1.1) |
sane-hp3500 | |
ScanJet 3530C | USB | 0x03f0/0x2005 | Good |
hp3500
(1.1) |
sane-hp3500 | |
ScanJet 3570C | USB | 0x03f0/0x2005 | Good |
hp3500
(1.1) |
sane-hp3500 | |
ScanJet 3670C | USB | 0x03f0/0x1405 | Complete | 1200x1200 dpi max, complete transparency adaptor support |
genesys
(1.0-63) |
sane-genesys |
ScanJet 3690C | USB | 0x03f0/0x1405 | Complete | 1200x1200 dpi max, same as HP 3670C |
genesys
(1.0-63) |
sane-genesys |
ScanJet 3770 | USB | 0x03f0/0x2505 | Unsupported | While an external binary-only backend exists, it works only on Linux i386. Therefore the scanner is unsupported on other platforms. |
unsupported
(2010-06-09) |
? |
ScanJet 3800 | USB | 0x03f0/0x2605 | Basic | Works with resolutions equal and less than 600dpi |
hp3900
(0.12) |
sane-hp3900 |
ScanJet 3970c | USB | 0x03f0/0x2305 | Good |
hp3900
(0.12) |
sane-hp3900 | |
ScanJet 4070 Photosmart | USB | 0x03f0/0x2405 | Good |
hp3900
(0.12) |
sane-hp3900 | |
ScanJet 4100C | USB | 0x03f0/0x0101 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 4200C | USB | 0x03f0/0x0105 | Basic | 8bpp color, 75/150/300/600 dpi only |
hp4200
(1.0-2) |
sane-hp4200 |
ScanJet 4200Cse | USB | 0x03f0/0x0105 | Basic | 8bpp color, 75/150/300/600 dpi only |
hp4200
(1.0-2) |
sane-hp4200 |
ScanJet 4200Cxi | USB | 0x03f0/0x0105 | Basic | 8bpp color, 75/150/300/600 dpi only |
hp4200
(1.0-2) |
sane-hp4200 |
ScanJet 4300c | USB | 0x03f0/0x0305 | Complete | If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
(0.3) |
sane-niash |
ScanJet 4300c/Silitek | USB | 0x047b/0x1002 | Complete | If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
(0.3) |
sane-niash |
ScanJet 4370 | USB | 0x03f0/0x4105 | Basic | Works with resolutions lower than 1200dpi |
hp3900
(0.12) |
sane-hp3900 |
scanjet 4400c | USB | 0x03f0/0x0705 | Good | exists with 2 different sensors of which only one works |
rts8891
(1.0-0) |
sane-rts8891 |
scanjet 4470c | USB | 0x03f0/0x0805 | Good | re-branded Astra 4400 |
rts8891
(1.0-0) |
sane-rts8891 |
ScanJet 4500C | USB | 0x03f0/0x1205 | Complete | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/ADF/ADF duplex/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 4570C | USB | 0x03f0/0x1305 | Complete | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 4600 | USB | 0x03f0/0x3005 | Unsupported | Not supported. See link for details, or http://www.chmil.org/hp4600linux/ for code |
unsupported
(2010-06-09) |
? |
ScanJet 4670 | USB | 0x03f0/0x3005 | Unsupported | Not supported. See ScanJet 4600 entry. |
unsupported
(2010-06-09) |
? |
ScanJet 4850C | USB | 0x03f0/0x1b05 | Untested | resolution from 100 to 2400 supported, UTA not supported yet |
genesys
(1.0-63) |
sane-genesys |
ScanJet 4890C | USB | 0x03f0/0x1b05 | Unsupported | GL843, maybe can be added to genesys backend |
unsupported
(2010-06-09) |
? |
ScanJet 5100C | Parport | Complete | Requires ppscsi driver and epst module |
hp
(1.06) |
sane-hp | |
ScanJet 5200C | Parport USB | 0x03f0/0x0401 | Complete | Parallel interface requires ppscsi driver and epst module |
hp
(1.06) |
sane-hp |
ScanJet 5300C | USB | 0x03f0/0x0701 | Complete | 1 pass, 2400 dpi - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
(Build: 296) |
sane-avision |
ScanJet 5370C | USB | 0x03f0/0x0701 | Good | 1 pass, 2400 dpi - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
(Build: 296) |
sane-avision |
ScanJet 5400c | USB | 0x03f0/0x1005 | Basic |
hp5400
(1.0-2) |
sane-hp5400 | |
ScanJet 5470c | USB | 0x03f0/0x1105 | Basic |
hp5400
(1.0-2) |
sane-hp5400 | |
ScanJet 5490c | USB | Basic |
hp5400
(1.0-2) |
sane-hp5400 | ||
ScanJet 5500C | USB | 0x03f0/0x1305 | Untested | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 5530C Photosmart | USB | 0x03f0/0x1605 | Unsupported | Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
(2010-06-09) |
? |
ScanJet 5550C | USB | 0x03f0/0x1205 | Complete | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/ADF/ADF duplex/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 5590 | USB | 0x03f0/0x1705 | Complete | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/ADF/ADF duplex/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 6100C | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet 6200C | SCSI USB | 0x03f0/0x0201 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 6250C | SCSI USB | 0x03f0/0x0201 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 6300C | SCSI USB | 0x03f0/0x0601 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 6350C | SCSI USB | 0x03f0/0x0601 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 6390C | SCSI USB | 0x03f0/0x0601 | Complete |
hp
(1.06) |
sane-hp | |
ScanJet 7400c | USB | 0x03f0/0x0801 | Good | 1 pass, 2400 dpi - dual USB/SCSI interface |
avision
(Build: 296) |
sane-avision |
ScanJet 7450c | USB | 0x03f0/0x0801 | Good | 1 pass, 2400 dpi - dual USB/SCSI interface |
avision
(Build: 296) |
sane-avision |
ScanJet 7490c | USB | 0x03f0/0x0801 | Good | 1 pass, 1200 dpi - dual USB/SCSI interface |
avision
(Build: 296) |
sane-avision |
ScanJet 7650 | USB | 0x03f0/0x1805 | Complete | Lineart/grayscale/color (24 bit), 100/200/300/600/1200/2400 DPI, flatbed/ADF/ADF duplex/TMA slides/TMA negatives |
hp5590 (1.0.5) |
sane-hp5590 |
ScanJet 8200 | USB | 0x03f0/0x0b01 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet 8250 | USB | 0x03f0/0x0b01 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet 8270 | USB | 0x03f0/0x3905 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet 8290 | USB | 0x03f0/0x0b01 | Good | 1 pass, 4800 (?) dpi - USB 2.0 and SCSI - only SCSI tested so far |
avision
(Build: 296) |
sane-avision |
ScanJet 8300 | USB | 0x03f0/0x3805 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet 8350 | USB | 0x03f0/0x3805 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet 8390 | USB | 0x03f0/0x3805 | Good | 1 pass, 4800 (?) dpi - USB 2.0 |
avision
(Build: 296) |
sane-avision |
ScanJet G2410 | USB | 0x03f0/0x0a01 | Basic | clone of the HP 2400C |
genesys
(1.0-63) |
sane-genesys |
ScanJet G2710 | USB | 0x03f0/0x2805 | Basic | Similar to hp scanjet 3800 |
hp3900
(0.12) |
sane-hp3900 |
ScanJet G3010 | USB | 0x03f0/0x4205 | Basic | Similar to hp scanjet 4370 |
hp3900
(0.12) |
sane-hp3900 |
ScanJet G3110 | USB | 0x03f0/0x4305 | Basic | Similar to hp scanjet 4370 |
hp3900
(0.12) |
sane-hp3900 |
ScanJet G4000 | USB | 0x03f0/0x4505 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
ScanJet G4010 | USB | 0x03f0/0x4505 | Good | resolution from 100 to 2400 supported, UTA not supported yet |
genesys
(1.0-63) |
sane-genesys |
ScanJet G4050 | USB | 0x03f0/0x4605 | Good | resolution from 100 to 2400 supported, UTA not supported yet |
genesys
(1.0-63) |
sane-genesys |
ScanJet IIc | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet IIcx | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet IIp | SCSI | Complete |
hp
(1.06) |
sane-hp | ||
ScanJet N6310 | USB | 0x03f0/0x4705 | Untested | Not supported yet |
genesys
(1.0-63) |
sane-genesys |
ScanJet Plus | Propietary | Complete | Driver for HP parallel interface card required |
hp
(1.06) |
sane-hp |
Link(s):
http://www.ibm.com/, http://www.ibm.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
2456 | SCSI | Basic | Was reported to work long time ago. Reports are welcome. |
ibm
(1.0-4) |
sane-ibm | |
ADF Color Scanner | Proprietary | Unsupported | Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.iomagic.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MobileScan USB | USB Parport | 0x05cb/0x1483 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://irislink.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
IriScan | USB | 0x0a53/0x1000 | Unsupported | Unsupported. LM9832/3. See link for details. |
unsupported
(2010-06-09) |
? |
IRISCard Pro (IBCR II) | USB | 0x0a38/0x0301 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
IRISPen Translator Executive | USB | 0x0f43/0x015a | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
1200U | USB | 0x0638/0x0268 | Untested |
avision
(Build: 296) |
sane-avision |
Link(s):
http://www.kodak.com, http://www.kodak.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Color Scanner 3590C | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Color Scanner 4500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
ESP 5 | USB | 0x040a/0x4032 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 7 | USB | 0x040a/0x403e | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 9 | USB | 0x040a/0x403f | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 2150 | USB | 0x040a/0x4059 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 2170 | USB | 0x040a/0x4066 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 3200 | USB | 0x040a/0x4043 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 3300 | USB | 0x040a/0x4031 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 4100 | USB | 0x040a/0x4053 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 5000 | USB | 0x040a/0x4028 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 5100 | USB | 0x040a/0x4025 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 5200 | USB Ethernet | 0x040a/0x4041 | Basic | USB good, Network good |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 5300 | USB | 0x040a/0x4026 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 5500 | USB | 0x040a/0x4027 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 6100 | USB | 0x040a/0x4054 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 7200 | USB | 0x040a/0x4056 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP 9200 | USB | 0x040a/0x4065 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP C110 | USB | 0x040a/0x4057 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP C115 | USB | 0x040a/0x4058 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP C310 | USB | 0x040a/0x405d | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
ESP C315 | USB | 0x040a/0x405e | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
Hero 3.1 | USB | 0x040a/0x406d | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
Hero 5.1 | USB | 0x040a/0x4064 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
Hero 7.1 | USB | 0x040a/0x4063 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
Hero 9.1 | USB Ethernet | 0x040a/0x4067 | Basic | USB good, Network good |
kodakaio
(2.4.6) |
sane-kodakaio |
Hero Office 6.1 | USB | 0x040a/0x4062 | Untested | Please test! |
kodakaio
(2.4.6) |
sane-kodakaio |
i30 | USB | 0x040a/0x6001 | Untested |
avision
(Build: 296) |
sane-avision | |
i40 | USB | 0x040a/0x6002 | Basic |
avision
(Build: 296) |
sane-avision | |
i50 | USB | 0x040a/0x6003 | Untested |
avision
(Build: 296) |
sane-avision | |
i55 | USB | 0x040a/0x6003 | Untested |
avision
(Build: 296) |
sane-avision | |
i60 | USB | 0x040a/0x6004 | Untested |
avision
(Build: 296) |
sane-avision | |
i65 | USB | 0x040a/0x6004 | Untested |
avision
(Build: 296) |
sane-avision | |
i80 | USB | 0x040a/0x6005 | Good |
avision
(Build: 296) |
sane-avision | |
i150 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i160 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i250 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i260 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i280 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i610 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i620 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i640 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i660 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i730 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i750 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i780 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i810 Scanner | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i820 Scanner | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i830 Scanner | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i840 Scanner | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i1840 Scanner | IEEE-1394 | Untested | Please test! |
kodak
(7) |
sane-kodak | |
i1860 Scanner | IEEE-1394 | Basic | Uncompressed B&W, Gray and Color, some automatic features supported |
kodak
(7) |
sane-kodak | |
s1740 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 900 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 923 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 1500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 2500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 3500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 3510 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 3520 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 5500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 7500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 7520 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 9500 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Scanner 9520 | SCSI | Untested | Please test! |
kodak
(7) |
sane-kodak | |
Snapshot Photo Scanner 1 | Parport | Unsupported | Unsupported. FCC ID HWF96PHS |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.komodo.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
S1200 | SCSI | Untested | rebadged Sceptre S1200 |
sceptre
(1.0-10) |
sane-sceptre |
Link(s):
http://www.konicaminolta.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
BizHub 162/132 | USB Network | Unsupported | Uses a similar protocol as the magicolor 1690MF, according to Ilia Sotnikov. |
magicolor
(1.0.0) |
sane-magicolor | |
DiMage 1611 | USB Network | Unsupported | Uses a similar protocol as the magicolor 1690MF, according to Ilia Sotnikov. |
magicolor
(1.0.0) |
sane-magicolor | |
DiMAGE Scan Elite 5400 | USB IEEE-1394 | 0x0686/0x400e | Unsupported | Probably unsupported. May work with vuescan. See link for details. |
unsupported
(2010-06-09) |
? |
DiMAGE Scan Elite 5400 2 | USB | 0x132b/0x0012 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
DiMAGE Scan Multi Pro | IEEE-1394 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? | |
Dual Scan III | USB | 0x0686/0x400d | Unsupported | Unsupported. May work with vuescan. See link for details. |
unsupported
(2010-06-09) |
? |
Dual Scan IV | USB | 0x132b/0x000a | Unsupported | Unsupported. Works with vuescan. See link for details. |
unsupported
(2010-06-09) |
? |
magicolor 1690MF | USB Network | 0x132b/0x2089 | Good | Multi-function color laser printer with fax, scanner and network interface |
magicolor
(1.0.0) |
sane-magicolor |
magicolor 2480MF | USB Network | Unsupported | Uses a different scanning protocol than the magicolor 1690MF |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
FS-1016MFP | USB | 0x0482/0x0335 | Untested | 1 pass, ??? dpi, A4 |
avision
(Build: 296) |
sane-avision |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
LEOScan S3 | SCSI | Good | FCC ID LUZFS1130 |
leo
(1.0-10) |
sane-leo |
Link(s):
http://www.lexmark.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
P6250 | USB | 0x043d/0x0097 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Photo 3150 | USB | 0x043d/0x007d | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X12xx | USB | 0x043d/0x007d | Good | USB1.1 is OK, USB2.0 needs testing |
lexmark
(1.0-0) |
sane-lexmark |
X70 | USB | 0x043d/0x002d | Good | Works, some resolutions fail at 16 bit |
gt68xx
(1.0-84) |
sane-gt68xx |
X73 | USB | 0x043d/0x002d | Good | Works, some resolutions fail at 16 bit, same as X70 |
gt68xx
(1.0-84) |
sane-gt68xx |
X74 | USB | 0x043d/0x0060 | Good | Supports 75, 150, 300, 600 dpi |
lexmark
(1.0-0) |
sane-lexmark |
X75 | USB | 0x043d/0x0060 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X75 PrinTrio | USB | 0x043d/0x0060 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X83 | USB | 0x043d/0x003d | Unsupported | Unsupported. GL640. |
unsupported
(2010-06-09) |
? |
X1110 | USB | 0x043d/0x007c | Untested |
lexmark
(1.0-0) |
sane-lexmark | |
X1130 | USB | 0x043d/0x007c | Good | Supports 75, 150, 300, 600 dpi |
lexmark
(1.0-0) |
sane-lexmark |
X1140 | USB | 0x043d/0x007c | Untested |
lexmark
(1.0-0) |
sane-lexmark | |
X1150 | USB | 0x043d/0x007c | Good | Supports 75, 150, 300, 600 dpi |
lexmark
(1.0-0) |
sane-lexmark |
X1170 | USB | 0x043d/0x007c | Good | Supports 75, 150, 300, 600 dpi |
lexmark
(1.0-0) |
sane-lexmark |
X1180 | USB | 0x043d/0x007c | Good |
lexmark
(1.0-0) |
sane-lexmark | |
X1185 | USB | 0x043d/0x007c | Good | Tested with xscanimage. Supports 75, 150, 300, 600, 1200(600x1200) dpi resolutions. Does grayscale or colour scans in the following sizes: wallet, 3x5, 4x6, 5x7, 8x10, letter. |
lexmark
(1.0-0) |
sane-lexmark |
X1195 | USB | 0x043d/0x007c | Untested |
lexmark
(1.0-0) |
sane-lexmark | |
X2330 | USB | 0x043d/0x00bb | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X3450 | USB | 0x043d/0x00f6 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X5130 | USB | 0x043d/0x0065 | Unsupported | Unsupported. |
unsupported
(2010-06-09) |
? |
X5150 | USB | 0x043d/0x0065 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X5250 | USB | 0x043d/0x0093 | Unsupported | Unsupported. |
unsupported
(2010-06-09) |
? |
X6170 | USB | 0x043d/0x0072 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X7170 | USB | 0x043d/0x0098 | Unsupported | Unsupported. See bug #310889 for details. |
unsupported
(2010-06-09) |
? |
X7350 | USB | 0x043d/0x00b8 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
X8350 | USB | 0x043d/0x00b9 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.heidelberg.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Jade | SCSI | Good | OK, SCSI-ID=LinoHell JADE |
umax
(1.0-41) |
sane-umax | |
Jade | SCSI | Good | OK, SCSI-ID=LinoHell Office |
umax
(1.0-41) |
sane-umax | |
Jade2 | SCSI | Good | OK, SCSI-ID=LinoHell Office2 |
umax
(1.0-41) |
sane-umax | |
Linoscan 1400 | SCSI | Good | OK, SCSI-ID=HDM LS4H1S |
umax
(1.0-41) |
sane-umax | |
Opal | SCSI | Untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax | |
Opal Ultra | SCSI | Untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax | |
Opal2 | SCSI | Good | OK; SCSI-ID=LinoHell OPAL2 |
umax
(1.0-41) |
sane-umax | |
Saphir | SCSI | Untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax | |
Saphir HiRes | SCSI | Untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax | |
Saphir Ultra | SCSI | Untested | support disabled until tested - please contact author |
umax
(1.0-41) |
sane-umax | |
Saphir Ultra II | SCSI | Good | OK, SCSI-ID=Linotype SAPHIR4 |
umax
(1.0-41) |
sane-umax | |
Saphir2 | SCSI | Good | OK, SCSI-ID=LinoHell SAPHIR2 |
umax
(1.0-41) |
sane-umax | |
Saphir3 | SCSI | Good | OK, SCSI-ID=LinoHell SAPHIR3 |
umax
(1.0-41) |
sane-umax |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
PageScan Color | Parport | Unsupported | Most probably unsupported. |
unsupported
(2010-06-09) |
? | |
PageScan USB | USB | 0x046d/0x040f | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.medion.com, http://www.medion.com/, http://www.medion.de/
Comment: Sold by Aldi and Tchibo.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
LT 9452 | USB | 0x05d8/0x4002 | Good | Similar to Mustek ScanExpress 1200 UB Plus |
gt68xx
(1.0-84) |
sane-gt68xx |
MD 4394 | USB | 0x05d8/0x4002 | Good | Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. |
gt68xx
(1.0-84) |
sane-gt68xx |
MD 6190 | USB | 0x0461/0x037b | Unsupported | Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
unsupported
(2010-06-09) |
? |
MD 6190 | USB | 0x0461/0x0392 | Unsupported | Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
unsupported
(2010-06-09) |
? |
MD 9458 | USB | 0x05d8/0x4002 | Good | Similar to Artec Ultima 2000 (e+?) |
gt68xx
(1.0-84) |
sane-gt68xx |
MD 9806 | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
MD 9848 | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
MD 40420 | USB | 0x05da/0x3008 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 41260 | USB | 0x0461/0x037b | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 41985 | USB | 0x0461/0x037b | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 42666 | USB | 0x05da/0x3008 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 85264 | USB | 0x08ff/0x2580 | Unsupported | Fingerprint sensor. See link for details. |
unsupported
(2010-06-09) |
? |
MD 90009 | USB | 0x05da/0x30e5 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 90070 | USB | 0x05da/0x3022 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD 90090 | USB | 0x05da/0x3022 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MD/LT 935x | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
MD/LT 985x | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
MD/LT 9375 | USB | 0x05d8/0x4002 | Untested | Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. |
gt68xx
(1.0-84) |
sane-gt68xx |
MD/LT 9385 | USB | 0x05d8/0x4002 | Good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-84) |
sane-gt68xx |
MD/LT 9890 | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
MD4394 | USB | 0x05d8/0x4003 | Good | Only scanners with product id 0x4003 will work; try the gt68xx backend, if your scanner has product id 0x4002 |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
MD5345 | USB | 0x0461/0x0377 | Good | Has a Primax USB ID |
genesys
(1.0-63) |
sane-genesys |
MD6228 | USB | 0x0461/0x0377 | Good | Has a Primax USB ID. Same as MD5345 |
genesys
(1.0-63) |
sane-genesys |
MD6471 | USB | 0x0461/0x0377 | Complete | Has a Primax USB ID. Same as MD5345 |
genesys
(1.0-63) |
sane-genesys |
MD9693 | USB | 0x05d8/0x4003 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u | |
MD9705 | USB | 0x05d8/0x4003 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
Link(s):
http://www.artecusa.com/, http://www.memorex.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
6136u | USB | 0x0461/0x0346 | Unsupported | Probably unsupported. |
unsupported
(2010-06-09) |
? |
6142u | USB | 0x0461/0x0347 | Unsupported | Probably unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
(2010-06-09) |
? |
MaxxScan 6122 | USB Parport | 0x05cb/0x1483 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
MEM 48U | USB | 0x05d8/0x4005 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u | |
SCF 9612P | Parport | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MM-9851 | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.microstar.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MR 9791 | USB | 0x05d8/0x4003 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
Link(s):
http://www.microtek.com/
Comment: Microtek makes a wide variety of devices.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
ArtixScan 2020 | SCSI | Unsupported | Unsupported. Same as Agfa DuoScan T2000XL? |
unsupported
(2010-06-09) |
? | |
Artixscan 2500f | SCSI IEEE-1384 | Unsupported | Unsupported. Same as Agfa DuoScan T2500? |
unsupported
(2010-06-09) |
? | |
ArtixScan 4000tf | USB | Unsupported | Unsupported. Uses ALI M5611B. |
unsupported
(2010-06-09) |
? | |
ArtixScanDI 2020 | USB | 0x05da/0x202e | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Color PageWiz | SCSI (Parport) | Basic | sheet-fed (preliminary, see mapage) |
microtek
(0.13.1) |
sane-microtek | |
FilmScan 35 | USB | 0x05e3/0x0120 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Phantom 330CX | Parport | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
Phantom 636 | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
Phantom 636CX | Parport | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker 5 | SCSI | Unsupported | Probably unsupported. See link for more details. |
unsupported
(2010-06-09) |
? | |
Scanmaker 35 | SCSI | Good | slide-scanner |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker 35t+ | SCSI | Good | slide-scanner |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker 45t | SCSI | Good | slide-scanner |
microtek
(0.13.1) |
sane-microtek | |
ScanMaker 330 | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker 336 CX | SCSI | Unsupported | Probably unsupported. Seems to be similar to the Microtek 330 CX and is detected by the microtek2 backend. Scanning doesn't seem to work however. |
unsupported
(2010-06-09) |
? | |
Scanmaker 600G(S) | SCSI | Basic | gray only (see manpage) |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker 600Z(S) | SCSI | Untested |
microtek
(0.13.1) |
sane-microtek | ||
ScanMaker 630 | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker 636 | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
Scanmaker 1850S | SCSI | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? | |
ScanMaker 3600 | USB | 0x05da/0x40ff | Basic | works |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3600 | USB | 0x05da/0x40ca | Basic | works |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3600 | USB | 0x05da/0x40b3 | Basic | works |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3630 | USB | 0x0461/0x0347 | Unsupported | Unsupported. Doesn't seem to be compatible to 3600 series, see link. |
unsupported
(2010-06-09) |
? |
ScanMaker 3700 | USB | 0x05da/0x40cb | Basic | works |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3700 | USB | 0x05da/0x40b8 | Basic | works |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3750 | USB | 0x05da/0x40dd | Basic | works (told) |
sm3600
(0.1) |
sane-sm3600 |
ScanMaker 3800 | USB | 0x05da/0x30ce | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 3830 | USB | 0x05da/0x30ce | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 3840 | USB | 0x05da/0x30d4 | Good | 8 and 16 bit, color and grayscale |
sm3840
(1.1) |
sane-sm3840 |
ScanMaker 3860 | USB | 0x05da/0x3023 | Unsupported | Unsupported. See link for more details. Appears to be similar to ScanMaker 3880. |
unsupported
(2010-06-09) |
? |
ScanMaker 3880 | USB | 0x05da/0x3021 | Unsupported | Unsupported. SQ113 chip. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 4600 | USB | 0x05da/0x40c7 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 4700 | USB | 0x05da/0x20b4 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 4800 | USB | 0x05da/0x30cf | Good | Same hardware as SM3840, different color box |
sm3840
(1.1) |
sane-sm3840 |
ScanMaker 4850 | USB | 0x05da/0x30d9 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
ScanMaker 4850 II | USB | 0x05da/0x3008 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
ScanMaker 4900 | USB | 0x05da/0x30b9 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 5600 | USB | 0x05da/0x20a7 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 5700 | USB | 0x05da/0x20bd | Unsupported | Unsupported. Uses ALI M5615 like the ScanMaker 4700. |
unsupported
(2010-06-09) |
? |
ScanMaker 5800 | USB | 0x05da/0x30d8 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
ScanMaker 5800 | USB | 0x05da/0x3008 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
ScanMaker 5900 | USB | 0x05da/0x30d8 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 5950 | USB | 0x05da/0x30d8 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 6000 | USB | 0x05da/0x30e5 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 6100 | USB | 0x05da/0x30e5 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanMaker 6400XL | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker 6700 | USB IEEE-1394 | 0x05da/0x20c9 | Unsupported | Unsupported. See link. |
unsupported
(2010-06-09) |
? |
ScanMaker 8700 | USB IEEE-1394 | 0x05da/0x20b1 | Unsupported | Unsupported. See link for details. USB vendor and product ids to be checked. |
unsupported
(2010-06-09) |
? |
ScanMaker 9600XL | USB IEEE-1394 | 0x05da/0x20de | Unsupported | Probably unsupported. SCSI seems to work with microtek2 backend. |
unsupported
(2010-06-09) |
? |
ScanMaker 9600XL | SCSI | Good | only flatbed mode ? |
microtek2
(unmaintained) |
sane-microtek2 | |
ScanMaker 9800XL | USB SCSI | 0x05da/0x20de | Unsupported | Partly unsupported. IEEE-1394 works with microtek2 backend. See link. |
unsupported
(2010-06-09) |
? |
ScanMaker 9800XL | IEEE-1394 | Minimal | IEEE-1394 seems to work. See link. More reports welcome. |
microtek2
(unmaintained) |
sane-microtek2 | |
Scanmaker E2 | SCSI | Good | 3-pass |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker E3 | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
ScanMaker E3plus | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker E3plus | Parport | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
Scanmaker E6 | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
ScanMaker i320 | USB | 0x05da/0x30e6 | Unsupported | Unsupported. See link. |
unsupported
(2010-06-09) |
? |
Scanmaker II | SCSI | Good | 3-pass |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker IIG | SCSI | Good | gray only |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker IIHR | SCSI | Good | 3-pass |
microtek
(0.13.1) |
sane-microtek | |
Scanmaker III | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
Scanmaker IISP | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
ScanMaker S400 | USB | 0x05da/0x300b | Unsupported | Unsupported. See link. |
unsupported
(2010-06-09) |
? |
ScanMaker s400 | USB | 0x05da/0x201c | Unsupported | Unsupported. See link. |
unsupported
(2010-06-09) |
? |
ScanMaker V6UPL | USB | 0x05da/0x00b6 | Basic | Sometimes scan speed goes to fast and results look badly smudged. |
microtek2
(unmaintained) |
sane-microtek2 |
ScanMaker V6USL | USB | 0x05da/0x80a3 | Complete |
microtek2
(unmaintained) |
sane-microtek2 | |
ScanMaker V6USL | USB | 0x05da/0x00a3 | Complete |
microtek2
(unmaintained) |
sane-microtek2 | |
ScanMaker V6USL | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V300 | Parport | Good |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V300 | SCSI | Good |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V310 | Parport | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V310 | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V600 | Parport | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker V600 | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker X6 | SCSI | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker X6EL | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
ScanMaker X6USB | USB | 0x05da/0x0099 | Good |
microtek2
(unmaintained) |
sane-microtek2 | |
ScanMaker X12USL | SCSI | Good | only Flatbed mode ? |
microtek2
(unmaintained) |
sane-microtek2 | |
ScanPort 3000 | USB | 0x04a7/0x0224 | Unsupported | Unsupported. Vendor/Product ids: 0x04a7/0x0224. Realtek RTS8801B?. See link for details. |
unsupported
(2010-06-09) |
? |
SlimScan C3 | Parport | Complete |
microtek2
(unmaintained) |
sane-microtek2 | ||
SlimScan C6 | USB | 0x05da/0x009a | Complete |
microtek2
(unmaintained) |
sane-microtek2 |
Link(s):
http://www.minolta.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Dimage Scan Dual I | SCSI | Basic |
avision
(Build: 296) |
sane-avision | ||
Dimage Scan Dual II | USB | 0x0638/0x026a | Good | 1 pass, film-scanner |
avision
(Build: 296) |
sane-avision |
Dimage Scan Dual III | USB | 0x0686/0x400d | Good | 1 pass, film-scanner |
avision
(Build: 296) |
sane-avision |
Dimage Scan Elite 5400 | USB | 0x0686/0x400e | Good | 1 pass, film-scanner |
avision
(Build: 296) |
sane-avision |
Elite II | USB | 0x0686/0x4004 | Untested | 1 pass, film-scanner |
avision
(Build: 296) |
sane-avision |
Scan Multi Pro | SCSI | Untested |
avision
(Build: 296) |
sane-avision |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
SC-110 | USB | 0x0638/0x0a15 | Untested |
avision
(Build: 296) |
sane-avision | |
SC-215 | USB | 0x0638/0x0a16 | Good |
avision
(Build: 296) |
sane-avision |
Link(s):
http://www.mitsubishi.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Diamondview 648UT | USB | 0x04a5/0x2022 | Good | Rebadged Benq 320u. |
SnapScan
(1.4) |
sane-snapscan |
Diamondview 650U | USB | 0x04a5/0x20b0 | Good | Rebadged Benq 4300. |
SnapScan
(1.4) |
sane-snapscan |
MCA-ADFC | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
S600C | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
S1200C | SCSI | Untested |
avision
(Build: 296) |
sane-avision | ||
SS600 | SCSI | Good |
avision
(Build: 296) |
sane-avision |
Link(s):
http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
96 CP | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
600 III EP Plus | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
1200 III EP | Parport | Unsupported | Probably not supported. quarlewm at jmu dot edu offers to temporarily loan such a scanner to anyone who is interested in writing a driver. |
unsupported
(2010-06-09) |
? | |
2400 M | USB | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? | |
BearPaw 1200 | USB | 0x0400/0x1001 | Complete | both product versions are supported, see backends' man-page |
plustek
(0.52) |
sane-plustek |
BearPaw 1200 | USB | 0x0400/0x1000 | Complete | both product versions are supported, see backends' man-page |
plustek
(0.52) |
sane-plustek |
BearPaw 1200 CS | USB | 0x055f/0x021e | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
BearPaw 1200 CU | USB | 0x05d8/0x4002 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
BearPaw 1200 CU Plus | USB | 0x055f/0x021c | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
BearPaw 1200 CU Plus | USB | 0x055f/0x021b | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
BearPaw 1200 F | USB | 0x055f/0x0010 | Good | Works upto 600 dpi. No support for TA and ADF yet. |
ma1509
(1.0-3) |
sane-ma1509 |
BearPaw 1200 TA | USB | 0x055f/0x021e | Good | Transparency adapter supported |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 1248 CU | USB | 0x055f/0x021c | Good | Seems to use the same ids as BearPaw 1200 CU Plus. |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 | USB | 0x0400/0x1001 | Complete |
plustek
(0.52) |
sane-plustek | |
BearPaw 2400 CS | USB | 0x055f/0x0218 | Untested | Probably works, reports are welcome |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 CS Plus | USB | 0x055f/0x0219 | Good | Works, problems with 12/16 bit modes? |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 CU | USB | 0x05d8/0x4002 | Basic | Works, but is slow |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 CU Plus | USB | 0x055f/0x021d | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
BearPaw 2400 TA | USB | 0x055f/0x0218 | Good | Transparency adapter supported |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 TA Plus | USB | 0x055f/0x0219 | Good | Transparency adapter supported |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2400 TA Pro | USB | 0x055f/0x0400 | Unsupported | Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
(2010-06-09) |
? |
BearPaw 2448 CS Plus | USB | 0x055f/0x021a | Basic | Slow. Same as 2448 TA Plus, but without TA. |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2448 CU Pro | USB | 0x055f/0x0408 | Unsupported | Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
(2010-06-09) |
? |
BearPaw 2448 TA Plus | USB | 0x055f/0x021a | Basic | Slow. Transparency adapter supported. Slow. Brightness depends on resolution? |
gt68xx
(1.0-84) |
sane-gt68xx |
BearPaw 2448TA Pro | USB | 0x055f/0x0409 | Good |
mustek_usb2
(1.0-10) |
sane-mustek_usb2 | |
BearPaw 4800 TA Pro | USB | 0x055f/0x1000 | Unsupported | Not supported. See link for some information. |
unsupported
(2010-06-09) |
? |
BearPaw 4800 TA Pro II | USB | 0x055f/0x040a | Unsupported | Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
(2010-06-09) |
? |
BearPaw 6400 TA Pro | USB | 0x055f/0x040b | Unsupported | Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
(2010-06-09) |
? |
Paragon 600 II CD | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon 600 II ED | Parport | Untested | Completely untested. If it's the same as the 600 II EP, it may work. Please contact me if you own such a device. |
mustek
(1.0-138) |
sane-mustek | |
Paragon 600 II EP | Parport | Minimal | Works, however only low resolutions and quality in color mode is bad. |
mustek
(1.0-138) |
sane-mustek | |
Paragon 600 II N | Proprietary | Basic | Resolutions above 300 dpi may cause trouble. |
mustek
(1.0-138) |
sane-mustek | |
Paragon 800 II EP | Parport | Unsupported | Not supported. Maybe similar to 600 II EP (SCSI_over-parport)? In this case it could be supported by the mustek SCSI backend. |
unsupported
(2010-06-09) |
? | |
Paragon 800 II SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon 1200 A3 Pro | SCSI | Complete | ADF and TA untested. Please contact me if you own such equipment. |
mustek
(1.0-138) |
sane-mustek | |
Paragon 1200 III SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon 1200 LS | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon 1200 SP Pro | SCSI | Good |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFC-600S | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFC-800S | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFS-1200SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFS-6000CX | SCSI | Good | 3-pass |
mustek
(1.0-138) |
sane-mustek | |
Paragon MFS-6000SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFS-8000SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Paragon MFS-12000CX | SCSI | Good | 3-pass |
mustek
(1.0-138) |
sane-mustek | |
Paragon MFS-12000SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
Plug-n-Scan 2400 M | USB | 0x055f/0x0219 | Good | Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus. |
gt68xx
(1.0-84) |
sane-gt68xx |
Plug-n-Scan 2400 MT | USB | 0x055f/0x0219 | Good | Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus. |
gt68xx
(1.0-84) |
sane-gt68xx |
ScanExpress 600 CP | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanExpress 600 CU | USB | 0x055f/0x0002 | Complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
ScanExpress 600 SEP | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanExpress 600 USB | USB | 0x055f/0x0873 | Unsupported | Unsupported. Programming information is available. |
unsupported
(2010-06-09) |
? |
ScanExpress 1200 CP | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanExpress 1200 CP+ | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanExpress 1200 CU | USB | 0x055f/0x0001 | Complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
ScanExpress 1200 CU Plus | USB | 0x055f/0x0008 | Complete |
mustek_usb
(1.0-18) |
sane-mustek_usb | |
ScanExpress 1200 FS | SCSI | Untested | One report that it crashes the computer. SCSI driver issue? Please contact me if you own such a device. |
mustek
(1.0-138) |
sane-mustek | |
ScanExpress 1200 UB | USB | 0x055f/0x0006 | Complete | For the UB Plus, see gt68xx backend |
mustek_usb
(1.0-18) |
sane-mustek_usb |
ScanExpress 1200 UB Plus | USB | 0x05d8/0x4002 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
ScanExpress 1200 USB | USB | 0x055f/0x0003 | Unsupported | Unsupported. Programming information is available. |
unsupported
(2010-06-09) |
? |
ScanExpress 1200 USB Plus | USB | 0x055f/0x0007 | Unsupported | Unsupported. |
unsupported
(2010-06-09) |
? |
ScanExpress 1248 UB | USB | 0x055f/0x021f | Complete |
gt68xx
(1.0-84) |
sane-gt68xx | |
ScanExpress 2400 USB | USB | 0x05d8/0x4002 | Minimal | Should be detected but may need some more work in the code. Testers welcome. Please contact me if you own this scanner. |
gt68xx
(1.0-84) |
sane-gt68xx |
ScanExpress 6000 P | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanExpress 6000SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
ScanExpress 12000 P | Parport | Unsupported | Not supported. Asic 1505/05. |
unsupported
(2010-06-09) |
? | |
ScanExpress 12000SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
ScanExpress 12000SP Plus | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
ScanExpress A3 EP | Parport | Unsupported | Not supported. Maybe it will be supported by the mustek_pp backend in future. |
unsupported
(2010-06-09) |
? | |
ScanExpress A3 SP | SCSI | Basic | Please test! |
mustek
(1.0-138) |
sane-mustek | |
ScanExpress A3 USB | USB | 0x055f/0x0210 | Basic | Still some vertical stripes. |
gt68xx
(1.0-84) |
sane-gt68xx |
ScanExpress CardSmart | USB | Unsupported | Probably unsupported. USB business card scanner. Maybe works as USB storage device? |
unsupported
(2010-06-09) |
? | |
ScanMagic 600 CP | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanMagic 600 II SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
ScanMagic 1200 UB Plus | USB | 0x05d8/0x4002 | Good | Same as ScanExpress 1200 UB Plus |
gt68xx
(1.0-84) |
sane-gt68xx |
ScanMagic 4800 P | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp | |
ScanMagic 4830S | SCSI | Untested | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 | |
ScanMagic 9636P | Parport | Unsupported | Probably not supported. Same as Mustek 12000 P?. ASIC 1505. |
unsupported
(2010-06-09) |
? | |
ScanMagic 9636S | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
ScanMagic 9636S Plus | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek | ||
TwainScan II SP | SCSI | Complete |
mustek
(1.0-138) |
sane-mustek |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Mobile Scanner | USB | 0x07b3/0x0462 | Basic | Similar to Plustek OpticSlim M12. |
gt68xx
(1.0-84) |
sane-gt68xx |
Scanalizer Professional 2.5 | USB | 0x07b3/0x0412 | Untested | Similar to Plustek OpticSlim M12. Please tell us if this scanner works. |
gt68xx
(1.0-84) |
sane-gt68xx |
Link(s):
http://www.nevt.co.jp/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
PC-IN500/4C | SCSI | Good | PC-IN500/4C was sold only in JAPAN |
nec
(0.12) |
sane-nec | |
Petiscan | USB | 0x0475/0x0100 | Unsupported | Most probably unsupported. See link for details. Vendor ID is Relisys/Teco. Not known if it is similar to other Relisys/Teco USB scanners. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Easy Plus 30 Bit | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.nikon.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
AX-110 / Scantouch 110 | SCSI | Untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax | |
AX-210 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Coolscan III | SCSI | Complete | Rebadged LS 30? |
coolscan3 (1.0.0) |
sane-coolscan3 | |
Coolscan V ED | USB | 0x04b0/0x4001 | Minimal | Rebadged LS 50? |
coolscan3 (1.0.0) |
sane-coolscan3 |
Coolscan V ED | USB | 0x04b0/0x4001 | Minimal |
coolscan2
(0.1.8) |
sane-coolscan2 | |
Coolspan IV | USB | 0x04b0/0x4000 | Complete | Rebadged LS 40? |
coolscan3 (1.0.0) |
sane-coolscan3 |
LS 30 | SCSI | Complete |
coolscan3 (1.0.0) |
sane-coolscan3 | ||
LS 30 | SCSI | Complete | working -- model available to developer |
coolscan2
(0.1.8) |
sane-coolscan2 | |
LS 40 ED | USB | 0x04b0/0x4000 | Complete |
coolscan3 (1.0.0) |
sane-coolscan3 | |
LS 40 ED | USB | 0x04b0/0x4000 | Complete |
coolscan2
(0.1.8) |
sane-coolscan2 | |
LS 50 ED | USB | 0x04b0/0x4001 | Minimal |
coolscan3 (1.0.0) |
sane-coolscan3 | |
LS 50 ED | USB | 0x04b0/0x4001 | Minimal |
coolscan2
(0.1.8) |
sane-coolscan2 | |
LS 2000 | SCSI | Good |
coolscan3 (1.0.0) |
sane-coolscan3 | ||
LS 2000 | SCSI | Good |
coolscan2
(0.1.8) |
sane-coolscan2 | ||
LS 4000 ED | IEEE-1394 | Good | needs linux kernel 2.4.19 or later |
coolscan3 (1.0.0) |
sane-coolscan3 | |
LS 4000 ED | IEEE-1394 | Good | needs linux kernel 2.4.19 or later |
coolscan2
(0.1.8) |
sane-coolscan2 | |
LS 8000 ED | IEEE-1394 | Good | needs linux kernel 2.4.19 or later |
coolscan3 (1.0.0) |
sane-coolscan3 | |
LS 8000 ED | IEEE-1394 | Good | needs linux kernel 2.4.19 or later |
coolscan2
(0.1.8) |
sane-coolscan2 | |
LS-20 | SCSI | Basic | The LS-20 has been replaced by the LS-30 |
coolscan
(0.4.3) |
sane-coolscan | |
LS-30 | SCSI | Basic | alpha: only 24/30 bit RGB + 32/40 bit RGBI |
coolscan
(0.4.3) |
sane-coolscan | |
LS-1000 | SCSI | Basic | Doesn't support gamma correction |
coolscan
(0.4.3) |
sane-coolscan | |
LS-2000 | SCSI | Basic | alpha: only 24/36 bit + RGB 32/48 bit RGBI |
coolscan
(0.4.3) |
sane-coolscan | |
LS-9000 ED | IEEE-1394 | Unsupported | Probably not supported. See link for details. Possibly similar to LS-8000 ED. |
unsupported
(2010-06-09) |
? | |
Super Coolscan LS-5000 ED | USB | 0x04b0/0x4002 | Untested | May work, similar to LS 50 ED, but untested. Please tell us if it works. |
coolscan3 (1.0.0) |
sane-coolscan3 |
Super Coolscan LS-5000 ED | USB | 0x04b0/0x4002 | Untested | May work, similar to LS 50 ED, but untested. Please tell us if it works. |
coolscan2
(0.1.8) |
sane-coolscan2 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MyScan 1200 | USB | 0x07b3/0x040b | Untested | Untested. Please test. Similar to Plustek OpticPro S12? |
gt68xx
(1.0-84) |
sane-gt68xx |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
S700 Scancopier | USB | 0x0638/0x0a16 | Good | 1 pass, 600 dpi, A4 |
avision
(Build: 296) |
sane-avision |
Link(s):
http://www.olivetti.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Job-Jet M400 | USB | 0x0b3c/0xa880 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.olympus.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
ES-10P | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
ES-10S | SCSI | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Barcode scanner | USB | 0x065a/0x0001 | Unsupported | Probably not supported. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
PhotoMaker 3C | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
PhotoMaker 3E | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
PhotoMaker 3F | Proprietary | Unsupported | Special ISA card |
unsupported
(2010-06-09) |
? | |
PhotoMaker 3S | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
PhotoMaker 6E | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
PhotoMaker 6F | Proprietary | Unsupported | Special ISA card |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Diamond 1200 | USB | 0x05d8/0x4002 | Good | Similar to Mustek BearPaw 1200 (Plus) |
gt68xx
(1.0-84) |
sane-gt68xx |
Diamond 1200 Plus | USB | 0x055f/0x021b | Good | Similar to Mustek BearPaw 1200 Plus |
gt68xx
(1.0-84) |
sane-gt68xx |
Diamond 1200 Plus | USB | 0x055f/0x021c | Good | Similar to Mustek BearPaw 1200 Plus |
gt68xx
(1.0-84) |
sane-gt68xx |
Diamond 2450 | USB | 0x055f/0x0219 | Good |
gt68xx
(1.0-84) |
sane-gt68xx |
Link(s):
http://www.panasonic.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
KV-S1020C | USB | 0x04da/0x1007 | Good |
kvs1025 (unmaintained) |
sane-kvs1025 | |
KV-S1025C | USB | 0x04da/0x1006 | Good |
kvs1025 (unmaintained) |
sane-kvs1025 | |
KV-S1045C | USB | 0x04da/0x1010 | Good |
kvs1025 (unmaintained) |
sane-kvs1025 | |
KV-S2025C | SCSI | Minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita | |
KV-S2026C | USB SCSI | 0x04da/0x1000 | Untested |
kvs20xx (unmaintained) |
sane-kvs20xx | |
KV-S2028C | USB | 0x04da/0x100a | Untested |
kvs20xx (unmaintained) |
sane-kvs20xx | |
KV-S2045C | SCSI | Minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita | |
KV-S2046C | USB SCSI | 0x04da/0x1001 | Untested |
kvs20xx (unmaintained) |
sane-kvs20xx | |
KV-S2048C | USB | 0x04da/0x1009 | Untested |
kvs20xx (unmaintained) |
sane-kvs20xx | |
KV-S2055L | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S2055W | USB SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S2065L | SCSI | Minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita | |
KV-S2065W | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S3065CL | USB SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S3065CW | USB SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S3085 | USB SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S3105C | USB SCSI | Unsupported | might be supported by matsushita backend. See http://code.google.com/p/kvss905c/ for a standalone scanning tool. |
unsupported
(2010-06-09) |
? | |
KV-S4065C | USB | 0x04da/0x100d | Untested |
kvs40xx (unmaintained) |
sane-kvs40xx | |
KV-S4085C | USB | 0x04da/0x100c | Untested |
kvs40xx (unmaintained) |
sane-kvs40xx | |
KV-S6040W | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S6045W | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S6050W | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S6055W | SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S7065C | USB SCSI | Unsupported | might be supported by matsushita backend. |
unsupported
(2010-06-09) |
? | |
KV-S7075C | USB | 0x04da/0x100e | Untested |
kvs40xx (unmaintained) |
sane-kvs40xx | |
KV-SS25 | SCSI | Complete |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS25D | SCSI | Complete |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS50 | SCSI | Untested |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS50EX | SCSI | Untested |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS55 | SCSI | Untested |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS55EX | SCSI | Minimal | no color, no high resolution, no automatic cropping |
matsushita
(1.0-7) |
sane-matsushita | |
KV-SS080 | USB | 0x04da/0x100f | Complete | All resolution and mode supported, calibration is available. Support sponsored by cncsolutions (http://www.cncsolutions.com.br) |
genesys
(1.0-63) |
sane-genesys |
KV-SS850 | SCSI | Untested |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS855 | SCSI | Untested |
matsushita
(1.0-7) |
sane-matsushita | ||
KV-SS905C | SCSI | Unsupported | might be supported by matsushita backend. See http://code.google.com/p/kvss905c/ for a standalone scanning tool. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.pentaxtech.com/, http://mobilesolutions.brother-usa.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DSmobile 600 | USB | 0x04f9/0x2038 | Good | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
DSmobile 600 | USB | 0x0a17/0x3210 | Good | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
DSmobile USB | USB | 0x0a82/0x2000 | Unsupported | Probably not supported. Some information is available. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.scanace.com/
Comment: Pacific Image Electronics
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
PF3650 Pro3 Film Scanner | USB IEEE-1394 | 0x05e3/0x0143 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Powerslide 3600 | USB IEEE-1394 | 0x05e3/0x0142 | Unsupported | Probably unsupported. Film scanner that can scan directly from the magazine. |
unsupported
(2010-06-09) |
? |
Primefilm 1800u | USB | 0x05e3/0x0120 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Primefilm 2700 | USB | Unsupported |
unsupported
(2010-06-09) |
? | ||
Primefilm 3600PRO | USB IEEE-1394 | Unsupported | Probably not supported. |
unsupported
(2010-06-09) |
? | |
ScanAce 630S | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce 636S | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce 1230S | SCSI | Good |
pie
(1.0) |
sane-pie | ||
ScanAce 1236S | SCSI | Good |
pie
(1.0) |
sane-pie | ||
ScanAce II | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce II Plus | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce III | SCSI | Good |
pie
(1.0) |
sane-pie | ||
ScanAce III Plus | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce Plus | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce ScanMedia | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce ScanMedia II | SCSI | Untested |
pie
(1.0) |
sane-pie | ||
ScanAce V | SCSI | Untested |
pie
(1.0) |
sane-pie |
Link(s):
http://www.image-land.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Splendeur 3024 | SCSI | Good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 |
Link(s):
http://www.planon.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DocuPen (DPEN-BW) | USB | Unsupported | Probably not supported. No details known. |
unsupported
(2010-06-09) |
? | |
DocuPen R700 | USB | 0x10c4/0xea60 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
DocuPen RC800 | USB | Unsupported | Probably not supported. No details known. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.plustek.com/, http://www.plustek.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Iriscan Express 2 | USB | 0x07b3/0x045f | Complete | Works up to 1200 dpi. Calibration with external calibration sheet supported |
gt68xx
(1.0-84) |
sane-gt68xx |
OptiCard 600+ | USB | Unsupported | Business card reader. No further information available. |
unsupported
(2010-06-09) |
? | |
OpticBook 3600 | USB | 0x07b3/0x0900 | Basic | Has a Primax USB ID |
genesys
(1.0-63) |
sane-genesys |
OpticFilm 7200 | USB | 0x07b3/0x0807 | Unsupported | GL842 based, maybe to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticFilm 7200i | USB | 0x07b3/0x0c04 | Unsupported | GL843 based, maybe to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro 600P/6000P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 1212U | USB | 0x07b3/0x0001 | Basic |
u12
(0.02) |
sane-u12 | |
OpticPro 1236P | Parport (SPP, EPP) | Complete | reported as OpticPro 12000P/96000P |
plustek_pp
(0.43) |
sane-plustek_pp | |
OpticPro 1248U | USB | 0x07b3/0x0401 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
OpticPro 1248U | USB | 0x07b3/0x0400 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
OpticPro 2400SP | SCSI | Untested | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 | |
OpticPro 4800P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 4830P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 4831P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 9600P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 9630P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 9630PL | Parport (SPP, EPP) | Complete | use driver-switch mov=1 |
plustek_pp
(0.43) |
sane-plustek_pp | |
OpticPro 9636P | Parport (SPP, EPP) | Complete | use driver-switch mov=4 |
plustek_pp
(0.43) |
sane-plustek_pp | |
OpticPro 9636P+/Turbo | Parport (SPP, EPP) | Complete | use driver-switch mov=3 |
plustek_pp
(0.43) |
sane-plustek_pp | |
OpticPro 9636T | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 12000P/96000P | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 12000T | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro 19200S | SCSI | Complete | rebadged Artec AM12S |
artec
(unmaintained) |
sane-artec | |
OpticPro A3U | USB | Unsupported | Uses Plustek ASIC P99002 |
unsupported
(2010-06-09) |
? | |
OpticPro AI3 | Parport (SPP, EPP) | Basic | use driver-switch mov=5, poor picture quality |
plustek_pp
(0.43) |
sane-plustek_pp | |
OpticPro P8 | Parport | Untested |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro P12 | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro PT12 | Parport (SPP, EPP) | Complete |
plustek_pp
(0.43) |
sane-plustek_pp | ||
OpticPro S6 | USB | Unsupported | Uses RealTek chipset (RTL8801D) |
unsupported
(2010-06-09) |
? | |
OpticPro S12 | USB | 0x07b3/0x0600 | Unsupported | Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend. |
unsupported
(2010-06-09) |
? |
OpticPro S12 | USB | 0x07b3/0x040b | Good | Product ID 0x040b only. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticPro S24 | USB | 0x07b3/0x0601 | Unsupported | Product id 0x0601 is unsupported but may be supported by the genesys backend in future /GL646). Product id 0x040e is supported by the gt68xx backend. |
unsupported
(2010-06-09) |
? |
OpticPro S24 | USB | 0x07b3/0x040e | Good | Product ID 0x040e only. Is reported to work. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticPro S28 | USB | 0x07b3/0x0801 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST12 | USB | 0x07b3/0x0600 | Unsupported | Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend. |
unsupported
(2010-06-09) |
? |
OpticPro ST12 | USB | 0x07b3/0x040b | Untested | Product ID 0x040b only. Needs testing. Transparency adapter completely untested. Please contact me if you own such a scanner. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticPro ST16 | USB | 0x07b3/0x0600 | Unsupported | GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST24 | USB | 0x07b3/0x0601 | Unsupported | GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST28 | USB | 0x07b3/0x0802 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST28 | USB | 0x07b3/0x0801 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST48 | USB | 0x07b3/0x0800 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST64 | USB | 0x07b3/0x0c00 | Unsupported | GL843 based, maybe to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticPro ST64+ | USB | 0x07b3/0x0c03 | Unsupported | GL843 based. See link for more details. |
unsupported
(2010-06-09) |
? |
OpticPro U12 | USB | 0x07b3/0x0001 | Basic | Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02) |
sane-u12 |
OpticPro U12 | USB | 0x07b3/0x0010 | Complete | NOTE: Devices with product ID 0x0001 are not supported! |
plustek
(0.52) |
sane-plustek |
OpticPro U16B | USB | 0x07b3/0x0402 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
OpticPro U16B+ | USB | 0x07b3/0x0403 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
OpticPro U24 | USB | 0x07b3/0x0015 | Complete |
plustek
(0.52) |
sane-plustek | |
OpticPro U24 | USB | 0x07b3/0x0011 | Complete |
plustek
(0.52) |
sane-plustek | |
OpticPro UA18 | USB | Unsupported | Probably LM983x based. |
unsupported
(2010-06-09) |
? | |
OpticPro UT12 | USB | 0x07b3/0x0001 | Basic | Note: Only devices with product ID 0x0001 are supported! |
u12
(0.02) |
sane-u12 |
OpticPro UT12 | USB | 0x07b3/0x0017 | Complete | Note: Devices with product ID 0x0001 are not supported! |
plustek
(0.52) |
sane-plustek |
OpticPro UT12 | USB | 0x07b3/0x0013 | Complete |
plustek
(0.52) |
sane-plustek | |
OpticPro UT16 | USB | 0x07b3/0x0017 | Complete |
plustek
(0.52) |
sane-plustek | |
OpticPro UT16B | USB | 0x07b3/0x0403 | Untested | Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticPro UT24 | USB | 0x07b3/0x0017 | Complete |
plustek
(0.52) |
sane-plustek | |
OpticSlim 500 | USB | 0x07b3/0x0458 | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
OpticSlim 1200 | USB | 0x07b3/0x0413 | Good |
gt68xx
(1.0-84) |
sane-gt68xx | |
OpticSlim 2400 | USB | 0x07b3/0x0422 | Good | Works up to 1200 dpi. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticSlim 2400 plus | USB | 0x07b3/0x0454 | Good | Same as OpticSlim 2400. |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticSlim 2420 | USB | 0x07b3/0x0806 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticSlim 2420+ | USB | 0x07b3/0x0914 | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OpticSlim M12 | USB | 0x07b3/0x0412 | Complete | Works up to 1200 dpi. Calibration with external calibration sheet supported |
gt68xx
(1.0-84) |
sane-gt68xx |
OpticWorks 2000 | Parport | Unsupported | Multifunction device. No further information available. |
unsupported
(2010-06-09) |
? | |
PL 806 | USB | 0x07b3/0x0c0c | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
ScanCopy 115 | USB | 0x07b3/0x081c | Unsupported | GL841 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
SmartOffice PL 812 | USB | 0x07b3/0x0c0d | Unsupported | Unsupported. See link for more details. |
unsupported
(2010-06-09) |
? |
Spectra ADF | Proprietary | Unsupported | Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? |
unsupported
(2010-06-09) |
? | |
Umax AstraScan 4750 | USB | 0x07b3/0x0802 | Unsupported | GL841 based, to be added to genesys backend, rebadged Plustek ST28 |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x0016 | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x0014 | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x0012 | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x000f | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x0007 | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Unknown Plustek Device | USB | 0x07b3/0x0005 | Unsupported | Probably unsupported. Scanner name not known yet. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.pandp.com.tw/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Q-Scan USB001 (A4 portable scanner) | USB | 0x0a53/0x1000 | Complete |
plustek
(0.52) |
sane-plustek | |
Q-Scan USB201 (A6 portable scanner) | USB | 0x0a53/0x2000 | Good |
plustek
(0.52) |
sane-plustek |
Link(s):
http://www.primax.nl/, http://www.primax.com.tw
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Colorado 600U | USB | 0x0461/0x0341 | Unsupported | Not supported. Some information is available. |
unsupported
(2010-06-09) |
? |
Colorado 1200p | Parport | Unsupported | Unsupported by SANE. But is reported to partly work with pxscan. See link. |
unsupported
(2010-06-09) |
? | |
Colorado 1200u | USB | 0x0461/0x0361 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
Colorado 4800 | Parport (SPP, EPP) | Untested | same as OpticPro 4800P |
plustek_pp
(0.43) |
sane-plustek_pp | |
Colorado Direct 600 | Parport | Unsupported | Not supported. However, a stand-alone program is available. |
unsupported
(2010-06-09) |
? | |
Colorado Direct 9600 | Parport | Unsupported | Not supported. However, a stand-alone program is available. |
unsupported
(2010-06-09) |
? | |
Colorado USB 9600 | USB | 0x0461/0x0340 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Compact 4800 Direct | Parport (SPP, EPP) | Complete | use driver-switch mov=2 |
plustek_pp
(0.43) |
sane-plustek_pp | |
Compact 4800 Direct-30 | Parport (SPP, EPP) | Complete | same as OpticPro 4830P, use driver-switch mov=7 |
plustek_pp
(0.43) |
sane-plustek_pp | |
Compact 4800 SCSI | SCSI | Complete | Mustek 600 II CD compatible |
mustek
(1.0-138) |
sane-mustek | |
Compact 9600 Direct-30 | Parport (SPP, EPP) | Complete | same as OpticPro 9630P |
plustek_pp
(0.43) |
sane-plustek_pp | |
G2-300 | USB | 0x0461/0x0300 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2-300 #2 | USB | 0x0461/0x0302 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2-600 | USB | 0x0461/0x0380 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2-600 #2 | USB | 0x0461/0x0382 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2E-300 | USB | 0x0461/0x0301 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2E-300 #2 | USB | 0x0461/0x0303 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
G2E-600 | USB | 0x0461/0x0383 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
Jewel 4800 | SCSI | Good | sub model VM356A |
teco2
(1.0-9) |
sane-teco2 | |
OneTouch 5300 | Parport | Unsupported | Not supported. |
unsupported
(2010-06-09) |
? | |
Onetouch 8920 | USB | 0x0461/0x0371 | Unsupported | Not supported. Look similar to Visioneer Onetouch 8920 (same USB product id). |
unsupported
(2010-06-09) |
? |
PagePartner | Parport (EPP/ECP) | Basic | Sheetfed scanner, work in gray and color, but uncalibrated scans |
p5
(1) |
sane-p5 | |
Primascan Colorado 2600u | USB | 0x0461/0x0347 | Unsupported | Unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
(2010-06-09) |
? |
Profi 9600 | SCSI | Basic | sub model VM6575 |
teco2
(1.0-9) |
sane-teco2 | |
Profi 19200 | SCSI | Good | sub model VM6586 |
teco2
(1.0-9) |
sane-teco2 | |
ReadyScan 636i | USB | 0x0461/0x0381 | Unsupported | Probably unsupported. No details known. |
unsupported
(2010-06-09) |
? |
Slim-Line 1200 | USB | Unsupported | Maybe GL646. Maybe similar to Medion MD 6228? |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.fida.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Winscan Pro 2000 | USB Parport | Unsupported | Not supported. No further information available. |
unsupported
(2010-06-09) |
? | |
Winscan Pro 2448U | USB | 0x06dc/0x0014 | Unsupported | Not supported. Some information is available. RealTek RTS8801. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.quato.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
X-Finity | SCSI | Unsupported | Probably not supported. No details yet. Originally manufactured by PFU? |
unsupported
(2010-06-09) |
? | |
X-Finity Ultra | USB IEEE-1394 | Unsupported | Probably not supported. No details yet. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DigitDia 3600 | USB IEEE-1394 | 0x05e3/0x0142 | Unsupported | Film scanner that can scan directly from the magazine. |
unsupported
(2010-06-09) |
? |
iScan 1800 | USB | 0x05e3/0x0120 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
ProScan 4000 | USB IEEE-1394 | 0x05e3/0x0143 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.relisys.com/, http://www.tecoimage.com.tw/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
APOLLO Express 3 | SCSI | Basic | sub model VM356A |
teco2
(1.0-9) |
sane-teco2 | |
APOLLO Express 6 | SCSI | Good | sub model VM6565 |
teco2
(1.0-9) |
sane-teco2 | |
AVEC 2400 | SCSI | Complete | sub model VM3520 |
teco1
(1.0-10) |
sane-teco1 | |
AVEC 2412 | SCSI | Complete | sub model VM3520+ |
teco1
(1.0-10) |
sane-teco1 | |
AVEC 4800 | SCSI | Untested | sub model VM4530 |
teco1
(1.0-10) |
sane-teco1 | |
AVEC 4816 | SCSI | Untested | sub model VM4530+ |
teco1
(1.0-10) |
sane-teco1 | |
AVEC II E3 | Parport | Unsupported | Parport version of AVEC II S3?. See bug #304992 for details |
unsupported
(2010-06-09) |
? | |
AVEC II S3 | SCSI | Good | sub model VM3564 |
teco2
(1.0-9) |
sane-teco2 | |
AVEC Super 3 | SCSI | Untested | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 | |
Eclipse 1200U | USB | 0x0475/0x0103 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Episode | USB | 0x0475/0x0103 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Infinity Scorpio | SCSI | Good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 | |
RELI 2400 | SCSI | Untested | sub model VM3530 |
teco1
(1.0-10) |
sane-teco1 | |
RELI 2412 | SCSI | Complete | sub model VM3530+ |
teco1
(1.0-10) |
sane-teco1 | |
RELI 4816 | SCSI | Complete | sub model VM4540 |
teco1
(1.0-10) |
sane-teco1 | |
RELI 4830 | SCSI | Good | sub model VM4542 |
teco1
(1.0-10) |
sane-teco1 | |
RELI 9600 | SCSI | Untested | sub model VM6530 |
teco1
(1.0-10) |
sane-teco1 | |
RELI 9612 | SCSI | Untested | sub model VM6530* |
teco1
(1.0-10) |
sane-teco1 | |
RELI 9624 | SCSI | Untested | sub model VM6530+ |
teco1
(1.0-10) |
sane-teco1 | |
RELI 9630 | SCSI | Untested | sub model VM6540 |
teco1
(1.0-10) |
sane-teco1 | |
RELI DS6 | SCSI | Untested | sub model VM3420 |
teco1
(1.0-10) |
sane-teco1 | |
RELI DS15 | SCSI | Untested | sub model VM3440 |
teco1
(1.0-10) |
sane-teco1 | |
SCORPIO Pro | SCSI | Good | sub model VM6575 |
teco2
(1.0-9) |
sane-teco2 | |
SCORPIO Pro-S | SCSI | Untested | sub model VM6586 |
teco2
(1.0-9) |
sane-teco2 | |
SCORPIO Super 3 | SCSI | Good | sub model VM3575 |
teco2
(1.0-9) |
sane-teco2 | |
Scorpio Ultra 3 | USB | 0x0475/0x0210 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
19200i | USB | 0x07b3/0x0400 | Good | Similar to Plustek OpticPro 1248U |
gt68xx
(1.0-84) |
sane-gt68xx |
RevScan Orange R48Ti | USB | 0x07b3/0x0001 | Basic | Rebadged Plustek OpticPro UT12 |
u12
(0.02) |
sane-u12 |
Link(s):
http://www.ricoh.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
IS-410 | SCSI | Untested | Untested, please report! |
ibm
(1.0-4) |
sane-ibm | |
IS-410 | SCSI | Untested | Untested, please report! |
hs2p
(1.00) |
sane-hs2p | |
IS-420 | SCSI | Basic | Works at least in flatbed mode. |
ibm
(1.0-4) |
sane-ibm | |
IS-430 | SCSI | Untested | Untested, please report! |
ibm
(1.0-4) |
sane-ibm | |
IS-430 | SCSI | Untested | Untested, please report! |
hs2p
(1.00) |
sane-hs2p | |
IS450 | SCSI | Complete | All major scanning-related features are supported (except for IPU). Certain non-scanning features, such as those related to scanner maintenance, are not supported. Such features would be better implemented in a separate stand-alone tool. For instance, if you replace the ADF Unit, you must recalibrate the scanner optics using a Ricoh Test Sheet and reset the E^2PROM registers. Reports are welcome. |
hs2p
(1.00) |
sane-hs2p | |
Ricoh IS50 | SCSI | Basic |
ricoh (unmaintained) |
sane-ricoh | ||
Ricoh IS60 | SCSI | Basic |
ricoh (unmaintained) |
sane-ricoh |
Link(s):
http://www.samsung.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
C460 | USB | 0x04e8/0x3468 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-2160 | USB | 0x04e8/0x3425 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-3160 | USB | 0x04e8/0x341c | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-3170fn (CLX-3170 Series) | USB | 0x04e8/0x342a | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-3175FW | USB | 0x04e8/0x342a | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-3185 | USB | 0x04e8/0x343d | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-3300 Series | USB | 0x04e8/0x3456 | Basic |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-4190 | USB | 0x04e8/0x345a | Minimal |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-6200 | USB | 0x04e8/0x3427 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-6220 | USB | 0x04e8/0x343a | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-6240 | USB | 0x04e8/0x3428 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-6250 | USB | 0x04e8/0x343b | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-6260 | USB | 0x04e8/0x3455 | Minimal |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-8380 | USB | 0x04e8/0x3421 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-8385 | USB | 0x04e8/0x3439 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-8385X | USB | 0x04e8/0x3444 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
CLX-8540 | USB | 0x04e8/0x343f | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
M267x 287x Series | USB | 0x04e8/0x3461 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
M337x 387x 407x Series | USB | 0x04e8/0x3460 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
MFP-65x | USB | 0x04e8/0x3435 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
MFP-560 | USB | 0x04e8/0x340e | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
MFP-750 | USB | 0x04e8/0x340f | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4x16 | USB | 0x04e8/0x3409 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4x20 | USB | 0x04e8/0x3412 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4x21 | USB | 0x04e8/0x3419 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4x26 | USB | 0x04e8/0x3432 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-5x30 | USB | 0x04e8/0x341a | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6x20 | USB | 0x04e8/0x340d | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6x22 | USB | 0x04e8/0x341d | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6x45 | USB | 0x04e8/0x3420 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6x55 | USB | 0x04e8/0x3429 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6x55X | USB | 0x04e8/0x3443 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-470x | USB | 0x04e8/0x3457 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-681x | USB | 0x04e8/0x3466 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-3205W (SCX-3200 Series) | USB Ethernet | 0x04e8/0x3441 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-3400 | USB | 0x04e8/0x344f | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-3405W | Ethernet | Basic |
xerox_mfp (1.0-13) |
sane-xerox_mfp | ||
SCX-4100 | USB | 0x04e8/0x3413 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4200 | USB | 0x04e8/0x341b | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4300 | USB | 0x04e8/0x342e | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4500 | USB | 0x04e8/0x3426 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4500W | USB Ethernet | 0x04e8/0x342b | Basic |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4600 | USB | 0x04e8/0x3433 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4623 | USB | 0x04e8/0x3434 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4623FW | USB | 0x04e8/0x3440 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4650 4x21S Series | USB | 0x04e8/0x345b | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4725FN | USB | 0x04e8/0x341f | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
SCX-4729FD | USB | 0x04e8/0x3453 | Basic |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4824 (SCX-4x24 Series) | USB | 0x04e8/0x342c | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4825FN (SCX-4x25 Series) | USB | 0x04e8/0x343c | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4828FN (SCX-4x28 Series) | USB | 0x04e8/0x342d | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4833FD | USB | 0x04e8/0x344b | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-4835FD | Ethernet | 0x04e8/0x344b | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-5635 | USB | 0x04e8/0x3430 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-5835_5935 | USB | 0x04e8/0x342f | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-5835_5935X | USB | 0x04e8/0x3446 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6545 | USB | 0x04e8/0x3437 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX-6545X | USB | 0x04e8/0x3442 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX4725 | USB | 0x04e8/0x341f | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SCX4725-FN | USB | 0x04e8/0x341f | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
SF-760 | USB | 0x04e8/0x3450 | Untested |
xerox_mfp (1.0-13) |
sane-xerox_mfp |
Link(s):
http://www.scanport.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
SQ300 | Parport? | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
SQ2030 | Parport | Basic |
microtek2
(unmaintained) |
sane-microtek2 | ||
SQ4836 | SCSI | Basic |
microtek2
(unmaintained) |
sane-microtek2 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
800N | USB | 0x0a82/0x6605 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.sceptre.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Vividscan S1200 | SCSI | Basic |
sceptre
(1.0-10) |
sane-sceptre |
Link(s):
http://sharp-world.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
JX-250 | SCSI | Good |
sharp
(0.32) |
sane-sharp | ||
JX-320 | SCSI | Good |
sharp
(0.32) |
sane-sharp | ||
JX-325 | SCSI | Untested |
sharp
(0.32) |
sane-sharp | ||
JX-330 | SCSI | Good |
sharp
(0.32) |
sane-sharp | ||
JX-350 | SCSI | Good |
sharp
(0.32) |
sane-sharp | ||
JX-610 | SCSI | Good |
sharp
(0.32) |
sane-sharp |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DMS 2000 | proprietary | Unsupported | Not supported until now. Work on a backend has started, contact the author for details (see link) |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.siemens.com/, http://www.siemens.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
9036 Flatbed scanner | SCSI | Basic |
s9036 (unmaintained) |
sane-s9036 | ||
Cherry FingerTIP ID Board - Sensor | USB | 0x0681/0x0010 | Unsupported | Not supported. |
unsupported
(2010-06-09) |
? |
ID Mouse Professional | USB | 0x0681/0x0005 | Unsupported | Not supported. |
unsupported
(2010-06-09) |
? |
S9036 | SCSI | Untested | gray only |
agfafocus (unmaintained) |
sane-agfafocus | |
ST400 | SCSI | Basic | 6 bit gray |
st400
(1.6) |
sane-st400 | |
ST800 | SCSI | Basic | 6 bit gray |
st400
(1.6) |
sane-st400 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
SmartScan 3600 | USB IEEE-1394 | Unsupported | Probably not supported. Same as PIE Primefilm 2600 PRO. |
unsupported
(2010-06-09) |
? |
Comment: Spot seems have gone out of business.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Maxiscan A4 | proprietary | Unsupported | Not supported until now. Work on a backend has started, see link for more information. |
unsupported
(2010-06-09) |
? | |
ScanTak 2c | proprietary | Unsupported | Not supported. Work on a backend has started, see link for more information. |
unsupported
(2010-06-09) |
? | |
ScanTak 3c | proprietary | Unsupported | Not supported. Work on a backend has started, see link for more information. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.syscaninc.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DocketPort 465 | USB | 0x0a82/0x4802 | Untested | All resolution and mode should be supported, but uncorrected scans |
genesys
(1.0-63) |
sane-genesys |
DocketPort 485 | USB | 0x0a82/0x4810 | Basic | All resolution and mode supported, front- and backside side-by-side, with backside mirrored horizontally. |
genesys
(1.0-63) |
sane-genesys |
DocketPort 665 | USB | 0x0a82/0x4803 | Basic | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
DocketPort 685/ Ambir DS685 | USB | 0x0a82/0x480c | Good | All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally. |
genesys
(1.0-63) |
sane-genesys |
TravelScan 460/464 | USB | 0x0a82/0x4600 | Complete |
plustek
(0.52) |
sane-plustek | |
TravelScan 662 | USB | 0x0a82/0x6620 | Complete |
plustek
(0.52) |
sane-plustek | |
TravelScan FS-531 | USB | 0x0a82/0x0530 | Unsupported | Not supported. May work with the Plustek backend in future. See link for details. |
unsupported
(2010-06-09) |
? |
TravelScan Pro | USB | 0x0a82/0x2000 | Unsupported | Probably not supported. Some information is available. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Artiscan 2400FS | USB | 0x05e3/0x0100 | Unsupported | Unsupported. See link for more information. |
unsupported
(2010-06-09) |
? |
Artiscan 6000C | SCSI | Good | 3 pass, 300 DPI |
tamarack (unmaintained) |
sane-tamarack | |
Artiscan 8000C | SCSI | Good | 3 pass, 400 DPI |
tamarack (unmaintained) |
sane-tamarack | |
Artiscan 9600 | Parport | Unsupported | Unsupported at the moment. See link for a project for that scanner taht may support it in future. |
unsupported
(2010-06-09) |
? | |
Artiscan 9600 pro 36 | Parport | Unsupported | Unsupported at the moment. See link for a project for that scanner. |
unsupported
(2010-06-09) |
? | |
Artiscan 12000C | SCSI | Good | 3 pass, 600 DPI |
tamarack (unmaintained) |
sane-tamarack |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Funline TS6 EP | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
Funline TS12 EP | Parport (EPP) | Good | 600x1200 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.tce.com.br/
Comment: Brasilian vendor.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
MK600U | USB | 0x0461/0x0346 | Unsupported | Not supported. Some information is available. |
unsupported
(2010-06-09) |
? |
S450 | Parport | Unsupported | Not supported by SANE but is reported to work with pxscan (see link). |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.tecoimage.com.tw/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
VM6509F | USB | 0x080d/0x0102 | Unsupported | Probably unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
FU661E | USB | 0x0461/0x0347 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.nikon.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
PowerScanII | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax |
Link(s):
http://www.trust-site.com, http://www.trust-site.com/home/, http://www.trust.com
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
240H Easy Webscan Gold | USB | 0x05d8/0x4007 | Basic | Works up to 600 dpi |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
240TH Easy Webscan Gold | USB | 0x055f/0x0218 | Good | Same as Mustek Bearpaw 2400 TA plus. |
gt68xx
(1.0-84) |
sane-gt68xx |
CombiScan 19200 | Parport USB | 0x05cb/0x1483 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Compact Scan USB 19200 | USB | 0x055f/0x0006 | Complete | Mustek 1200 UB compatible |
mustek_usb
(1.0-18) |
sane-mustek_usb |
Compact Scan USB 19200 | USB | 0x05d8/0x4002 | Good | Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) |
gt68xx
(1.0-84) |
sane-gt68xx |
Direct WebScan 19200 | USB | 0x055f/0x021c | Good | Same as Mustek BearPaw 1200 CU Plus (0x021c). |
gt68xx
(1.0-84) |
sane-gt68xx |
Easy Connect 9600+ | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
Easy Connect 19200+ | Parport (EPP) | Good | 300x600 dpi CIS scanner |
mustek_pp
(13) |
sane-mustek_pp | |
Easy Scan 9600 Plus | Parport | Basic | Requires the program 'as6edriver' to run. |
as6e
(0.5) |
sane-as6e | |
Easy Webscan 19200 | USB | 0x05d8/0x4006 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u | |
EasyScan 19200 | Parport | Unsupported |
unsupported
(2010-06-09) |
? | ||
Flat Scan USB 19200 | USB | 0x05d8/0x4002 | Good | Similar to Artec Ultima 2000 |
gt68xx
(1.0-84) |
sane-gt68xx |
Imagery 1200 | SCSI | Good | 3-pass, Mustek Paragon MFS-6000CX compatible |
mustek
(1.0-138) |
sane-mustek | |
Imagery 1200 SP | SCSI | Complete | Mustek Paragon MFS-6000SP compatible |
mustek
(1.0-138) |
sane-mustek | |
Imagery 2400 SP | SCSI | Good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 | |
Imagery 4800 SP | SCSI | Complete | Mustek Paragon 600 II CD compatible |
mustek
(1.0-138) |
sane-mustek | |
Imagery 4800 SP+ | SCSI | Good | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 | |
Imagery 9600 SP | SCSI | Untested | sub model VM3552 |
teco3
(1.0-1) |
sane-teco3 | |
Office Scan USB 19200 | USB | 0x047b/0x1000 | Complete |
niash
(0.3) |
sane-niash | |
SCSI Connect 19200 | SCSI | Complete | Mustek ScanExpress 12000SP compatible |
mustek
(1.0-138) |
sane-mustek | |
SCSI excellence series 19200 | SCSI | Complete | Mustek ScanExpress 12000SP compatible |
mustek
(1.0-138) |
sane-mustek | |
SCSI Scan 19200 -Excellence Series- | SCSI | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn, http://www.umax.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Astra 600P | Parport (SPP/ECP) | Unsupported | untested, but should be close to 610P |
umax_pp
(1) |
sane-umax_pp | |
Astra 600S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 610P | Parport (SPP/ECP) | Good |
umax_pp
(1) |
sane-umax_pp | ||
Astra 610S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 1200S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 1220P | Parport (EPP/ECP) | Good |
umax_pp
(1) |
sane-umax_pp | ||
Astra 1220S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 1220U | USB | 0x1606/0x0010 | Good |
umax1220u
(unmaintained) |
sane-umax1220u | |
Astra 1600P | Parport (EPP/ECP) | Good |
umax_pp
(1) |
sane-umax_pp | ||
Astra 1600U | USB | 0x1606/0x0030 | Good |
umax1220u
(unmaintained) |
sane-umax1220u | |
Astra 2000P | Parport (EPP/ECP) | Good |
umax_pp
(1) |
sane-umax_pp | ||
Astra 2000U | USB | 0x1606/0x0030 | Good |
umax1220u
(unmaintained) |
sane-umax1220u | |
Astra 2100S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 2100U | USB | 0x1606/0x0130 | Good |
umax1220u
(unmaintained) |
sane-umax1220u | |
Astra 2200 (SU) | USB | 0x1606/0x0230 | Good | OK, needs USB control messages |
umax
(1.0-41) |
sane-umax |
Astra 2200 (SU) | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 2400S | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Astra 2500 | USB | 0x0461/0x0374 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Astra 2850 | USB | 0x07b3/0x0601 | Unsupported | Probably not supported. Same IDs as Plustek OpticPro ST24. See link for details. |
unsupported
(2010-06-09) |
? |
Astra 3000 | USB | 0x0461/0x038a | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Astra 3600 | USB | 0x0461/0x038a | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Astra 4000 | USB | 0x1606/0x1030 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Astra 4100 | USB | 0x0461/0x038c | Unsupported | Not supported, to be added to genesys backend. |
unsupported
(2010-06-09) |
? |
Astra 4400 | USB | 0x1606/0x0070 | Good | Supports 75, 150, 300, 600 and 1200 dpi |
rts8891
(1.0-0) |
sane-rts8891 |
Astra 4450 | USB | 0x1606/0x0070 | Untested |
rts8891
(1.0-0) |
sane-rts8891 | |
Astra 4500 | USB | 0x0638/0x0a10 | Unsupported | GL646 based, to be added to genesys backend. Avision iVina FB1600 clone |
unsupported
(2010-06-09) |
? |
Astra 4600 | USB | Unsupported | Probably not supported, no details known. |
unsupported
(2010-06-09) |
? | |
Astra 4700 | USB | 0x0638/0x0a20 | Unsupported | GL646/GL660 based. Avision iVina FB1800 clone. |
unsupported
(2010-06-09) |
? |
Astra 4900 | USB | 0x06dc/0x0020 | Minimal | developing yet |
hp3900
(0.12) |
sane-hp3900 |
Astra 6400 | IEEE-1394 | Unsupported | will probably work one day |
umax
(1.0-41) |
sane-umax | |
Astra 6450 | IEEE-1394 | Unsupported | will probably work one day |
umax
(1.0-41) |
sane-umax | |
Astra 6700 | USB | Unsupported | Not supported. No chipset information available. Same as Avision iVina FB2400. |
unsupported
(2010-06-09) |
? | |
Astra MX3 | USB | Good | OK, needs USB control messages |
umax
(1.0-41) |
sane-umax | |
Astra MX3 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
AstraSlim | USB | 0x080d/0x0104 | Unsupported | Probably not supported currently. See link for more details. |
unsupported
(2010-06-09) |
? |
AstraSlim 1200 | USB | 0x080d/0x0110 | Unsupported | See link for more details. |
unsupported
(2010-06-09) |
? |
AstraSlim 1200 SE | USB | 0x05d8/0x4010 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u | |
AstraSlim 6000 | USB | 0x080d/0x0104 | Unsupported | Probably not supported currently. See link for more details. |
unsupported
(2010-06-09) |
? |
AstraSlim SE | USB | 0x05d8/0x4009 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u | |
Gemini D-16 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Mirage D-16L | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Mirage II | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Mirage IIse | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Nete3470' | Parport | Unsupported | Probably not supported. No details known.. |
unsupported
(2010-06-09) |
? | |
PL-II | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
PowerLook | SCSI | Good | OK, SCSI-ID=PS-2400X |
umax
(1.0-41) |
sane-umax | |
Powerlook 180 | USB | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? | |
PowerLook 270 | SCSI | Unsupported | incompatible |
umax
(1.0-41) |
sane-umax | |
PowerLook 270plus | SCSI | Unsupported | incompatible |
umax
(1.0-41) |
sane-umax | |
Powerlook 1000 USB | USB | Unsupported | Probably not supported. No further information available. |
unsupported
(2010-06-09) |
? | |
PowerLook 1100 | IEEE-1394 | Unsupported | will probably work one day |
umax
(1.0-41) |
sane-umax | |
PowerLook 2000 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
PowerLook 2100XL | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
PowerLook 3000 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
PowerLook III | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
PSD | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Supervista S-12 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UC 630 | SCSI | Good | Version 2.8 OK, others only lineart OK |
umax
(1.0-41) |
sane-umax | |
UC 840 | SCSI | Good | Version 1.6 OK, others only lineart OK |
umax
(1.0-41) |
sane-umax | |
UC 1200S | SCSI | Untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax | |
UC 1200SE | SCSI | Good | Version 3.0 OK, others unknown |
umax
(1.0-41) |
sane-umax | |
UC 1260 | SCSI | Good | Version 1.6 OK, others unknown |
umax
(1.0-41) |
sane-umax | |
UG 80 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UG 630 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UMAX 3400 | USB | 0x1606/0x0060 | Complete | there are some UMAX 3400 outside the U.S. which are not supported, as they use another chipset than the LM983x |
plustek
(0.52) |
sane-plustek |
UMAX 3400 | USB | 0x1606/0x0050 | Complete | there are some UMAX 3400 outside the U.S. which are not supported, as they use another chipset than the LM983x |
plustek
(0.52) |
sane-plustek |
UMAX 3450 | USB | 0x1606/0x0060 | Complete |
plustek
(0.52) |
sane-plustek | |
UMAX 5400 | USB | 0x1606/0x0160 | Complete |
plustek
(0.52) |
sane-plustek | |
UMAX Astranet ia101 | USB | 0x1606/0x0060 | Complete | seems to be a renamed UMAX 3400 |
plustek
(0.52) |
sane-plustek |
UMAX S-6E | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UMAX S-6EG | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UMAX S-12 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UMAX S-12G | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
UMAX VT600 | SCSI | Untested | may work, please test and give feedback |
umax
(1.0-41) |
sane-umax | |
Vista S6 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Vista S6E | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Vista-S8 | SCSI | Good | OK |
umax
(1.0-41) |
sane-umax | |
Vista-T630 | SCSI | Good | OK for some firmwareversions, on others only lineart OK |
umax
(1.0-41) |
sane-umax |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
3000 | USB | 0x04a7/0x0224 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.visioneer.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
4800 One Touch | USB | 0x04a7/0x03a0 | Unsupported | Unsupported. See link for details. Different id compared to One Touch 4800? |
unsupported
(2010-06-09) |
? |
6200 | USB | 0x0461/0x0345 | Unsupported | Not supported. Is reported to use the E5 chipset. Uses a Primax ID. Looks similar to Primascan Colorado 2600u. |
unsupported
(2010-06-09) |
? |
6200 EPP/USB | USB | 0x04a7/0x0311 | Unsupported | Not supported. Id is from Primax? Yet another scanner with the same name? |
unsupported
(2010-06-09) |
? |
9320 | USB | 0x04a7/0x0420 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9420 | USB | 0x0461/0x03a8 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
9450 | USB | 0x04a7/0x0421 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9450 USB | USB | 0x04a7/0x0421 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
9450-G | USB | 0x04a7/0x047a | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9550 | USB | 0x04a7/0x0422 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9650 | USB | 0x04a7/0x0390 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9650-G | USB | 0x04a7/0x047b | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9750 | USB | 0x04a7/0x0423 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
9750-G | USB | 0x04a7/0x0493 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
DocuImage 620S | SCSI | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? | |
DocuMate 510 | USB | 0x04a7/0x047c | Unsupported | Not supported. See link for more details. Yet another USB id. |
unsupported
(2010-06-09) |
? |
DocuMate 510 | USB | 0x04a7/0x0446 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
One Touch 4800 | USB | 0x04a7/0x0224 | Unsupported | Unsupported. See link for details. Different id compared to 4800 One Touch? |
unsupported
(2010-06-09) |
? |
Onetouch 4400 | USB | 0x0461/0x0347 | Unsupported | Not supported. E5 chipset? See link for more details. |
unsupported
(2010-06-09) |
? |
OneTouch 4800 USB | USB | 0x04a7/0x0224 | Unsupported | Unsupported. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. |
unsupported
(2010-06-09) |
? |
OneTouch 5300 | USB | 0x04a7/0x0221 | Unsupported | Not supported. Yet another scanner with this name? |
unsupported
(2010-06-09) |
? |
OneTouch 5300 USB | USB | 0x04a7/0x0226 | Unsupported | Not supported. Chipset is RTS8801B(?). See link for output of /proc/bus/usb/devices. |
unsupported
(2010-06-09) |
? |
OneTouch 5800 USB | USB | 0x04a7/0x0226 | Unsupported | Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C. |
unsupported
(2010-06-09) |
? |
OneTouch 6600 | USB | 0x04a7/0x022a | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch 7100 | USB | 0x04a7/0x0229 | Unsupported | GL646 based, to be added to genesys backend |
unsupported
(2010-06-09) |
? |
OneTouch 7300 | USB | 0x04a7/0x0444 | Good | Works upto 1200 dpi and 12 bits/color. |
gt68xx
(1.0-84) |
sane-gt68xx |
Onetouch 7700 | USB | 0x04a7/0x0380 | Unsupported | LM9832/3 based, to be added to plustek backend |
unsupported
(2010-06-09) |
? |
OneTouch 8100 | USB | 0x04a7/0x0321 | Unsupported | Unsupported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch 8700 | USB | 0x04a7/0x0371 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch 8900 | USB | 0x04a7/0x0371 | Unsupported | Not supported. Same as 8920 but without TA? |
unsupported
(2010-06-09) |
? |
Onetouch 8920 | USB | 0x04a7/0x0371 | Unsupported | Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices. |
unsupported
(2010-06-09) |
? |
Onetouch 9000 | USB | 0x04a7/0x022c | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch 9020 | USB | 0x04a7/0x022c | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch 9320 | USB | 0x04a7/0x0362 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch Pro 8800 | USB | 0x04a7/0x0410 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Onetouch Pro 8820 | USB | 0x04a7/0x0410 | Unsupported | Probably not supported. See link for details. |
unsupported
(2010-06-09) |
? |
PaperPort 3100b | Parport | Unsupported | Most probably not supported. See link for details. |
unsupported
(2010-06-09) |
? | |
PaperPort 6100 | Parport | Unsupported | Most probably not supported. More details would be appreciated. |
unsupported
(2010-06-09) |
? | |
PaperPort OneTouch | Parport | Unsupported | Most probably not supported. See link for details. |
unsupported
(2010-06-09) |
? | |
Patriot 430 | USB | 0x04a7/0x0497 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Patriot 470 | USB | 0x04a7/0x048f | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Patriot 680 | USB | 0x04a7/0x0498 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Patriot 780 | USB | 0x04a7/0x0499 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Roadwarrior | USB | 0x04a7/0x0494 | Basic | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
Strobe Pro USB | USB | 0x04a7/0x0102 | Unsupported | Not supported. See link for details. |
unsupported
(2010-06-09) |
? |
Strobe XP 100 | USB | 0x04a7/0x0427 | Basic |
plustek
(0.52) |
sane-plustek | |
Strobe XP 100,r3 | USB | 0x04a7/0x049b | Good | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
Strobe XP 200 | USB | 0x04a7/0x0426 | Good | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
Strobe XP 300 | USB | 0x04a7/0x0474 | Good | All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally. |
genesys
(1.0-63) |
sane-genesys |
Strobe XP 450 | USB | 0x04a7/0x0424 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Strobe XP 450-G | USB | 0x04a7/0x0491 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Strobe XP 470 | USB | 0x04a7/0x0479 | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Strobe XP 470-G | USB | 0x04a7/0x048f | Complete | sheetfed scanner |
avision
(Build: 296) |
sane-avision |
Visioneer OneTouch 7100 | USB | 0x04a7/0x0229 | Complete | Same as MD5345 |
genesys
(1.0-63) |
sane-genesys |
WorkCentre 470cx | Parport | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? | |
WorkCentre M15i | USB | 0x0924/0xffef | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
WorkCentre PE16 | USB Parport | 0x0924/0x4220 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
WorkCentre PE120i | USB | 0x0924/0x4237 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
WorkCentre Pro 412 | USB Parport | 0x043d/0x4303 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
WorkCentre XK35c | USB Parport | 0x043d/0x0020 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
WorkCentre XK50cx | USB | 0x04e8/0x3903 | Unsupported | Not supported. See link for more details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Compact II | Parport (EPP) | Good | 300 dpi CCD scanner |
mustek_pp
(13) |
sane-mustek_pp |
Link(s):
http://www.vobis.de/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
HighScan | SCSI | Complete | only E3plus based models |
microtek2
(unmaintained) |
sane-microtek2 | |
Highscreen Realscan | SCSI | Good |
microtek
(0.13.1) |
sane-microtek | ||
Highscreen Scanboostar Premium | SCSI | Good | OK, SCSI-ID=LinoHell Office2 |
umax
(1.0-41) |
sane-umax |
Comment: Company was renamed to Benq.
Link(s):
http://www.xerox.com/, http://www.office.xerox.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
2400 Onetouch | USB | 0x0461/0x038b | Complete | GL646 based, resolution from 75 to 2400 dpi |
genesys
(1.0-63) |
sane-genesys |
DocuMate150 | USB | 0x04a7/0x049c | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate152 | USB | 0x04a7/0x0477 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate162 | USB | 0x04a7/0x049d | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate232 | USB | 0x04a7/0x0476 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate250 | USB | 0x04a7/0x0448 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate250-G | USB | 0x04a7/0x0490 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate252 | USB | 0x04a7/0x0449 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate252-G | USB | 0x04a7/0x048c | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate262 | USB | 0x04a7/0x044c | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate262-G | USB | 0x04a7/0x048d | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate262i | USB | 0x04a7/0x04a7 | Good |
avision
(Build: 296) |
sane-avision | |
DocuMate272 | USB | 0x04a7/0x0475 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate272-G | USB | 0x04a7/0x048e | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate510 | USB | 0x04a7/0x0446 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate510-G | USB | 0x04a7/0x047c | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate512 | USB | 0x04a7/0x0495 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate520 | USB | 0x04a7/0x0447 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate520-G | USB | 0x04a7/0x0492 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate632 | USB | 0x04a7/0x0498 | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate752 | USB | 0x04a7/0x049a | Untested |
avision
(Build: 296) |
sane-avision | |
DocuMate752 | USB | 0x04a7/0x0478 | Untested |
avision
(Build: 296) |
sane-avision | |
Phaser 3200MFP | USB | 0x0924/0x3da4 | Complete |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
Phaser 6110MFP | USB | 0x0924/0x3d5d | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
Travel Scanner 100 | USB | 0x04a7/0x04ac | Good | All resolution and mode supported, calibration is available |
genesys
(1.0-63) |
sane-genesys |
WorkCentre 3119 Series | USB | 0x0924/0x4265 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
WorkCentre 3210 | USB | 0x0924/0x4293 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
WorkCentre 3220 | USB | 0x0924/0x4294 | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp | |
WorkCentre 4118 Series | USB | 0x0924/0x420c | Good |
xerox_mfp (1.0-13) |
sane-xerox_mfp |
Link(s):
http://www.yakumo.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Scan50 | USB | 0x05d8/0x4011 | Good |
artec_eplus48u (unmaintained) |
sane-artec_eplus48u |
Manufacturers: Kodak, Polaroid
Link(s):
http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DC20 | Serial port | Basic | DC-20 untested by author but reported to work |
dc25
(1.2) |
sane-dc25 | |
DC25 | Serial port | Complete |
dc25
(1.2) |
sane-dc25 | ||
DC210 | Serial port | Basic |
dc210
(0.0) |
sane-dc210 | ||
DC240 | Serial port | Good | Use gphoto2 backend to get USB support |
dc240
(0.0) |
sane-dc240 |
Link(s):
http://www.polaroid.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
DMC | SCSI | Good |
dmc (unmaintained) |
sane-dmc |
Manufacturers: Aiptek, Biolux, Connectix, Creative, Digital Dream, Grandtek Scopecam, Konica
Link(s):
http://www.aiptek.com.tw
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Aiptek Pencam | USB | 0x0553/0x0202 | Minimal | image is OK for CIF and QCIF, VGA and QVGA untested, streaming video is a problem |
stv680
(1.0-1) |
sane-stv680 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
654 (micrOcular) | USB | 0x0923/0x010f | Unsupported | Not supported yet. See link for more details. |
unsupported
(2010-06-09) |
? |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
Color QuickCam | Parport | Good | Requires root privileges. |
qcam (unmaintained) |
sane-qcam | |
Greyscale QuickCam | Parport | Minimal | Requires root privileges. Partly working. |
qcam (unmaintained) |
sane-qcam |
Link(s):
http://www.creative.com/
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
WebCam Go Mini | USB | 0x041e/0x4007 | Untested |
stv680
(1.0-1) |
sane-stv680 |
Link(s):
http://www.digitaldreamco.com/en/index.shtml
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
l' espion XS | USB | 0x1183/0x0001 | Untested |
stv680
(1.0-1) |
sane-stv680 |
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
8x30 Binocular & Digital Camera | USB | 0x0797/0x801c | Unsupported | Not Supported yet. See link for more details. |
unsupported
(2010-06-09) |
? |
Link(s):
http://www.konicaminolta.com
Model | Interface | USB id | Status | Comment | Backend | Manpage |
---|---|---|---|---|---|---|
e-mini | USB | 0x04c8/0x0722 | Untested |
stv680
(1.0-1) |
sane-stv680 |
Backends: gphoto2, pint, pnm, test, v4l
Link(s):
mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a handful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!
Manual page: sane-pint
Description: Scanners with the machine-independent PINT interface
Comment: Haven't been tested for a long time. Handle with care.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Description: Reads PNM files
Comment: Used for debugging frontends. Obsolete, use test backend instead.
Link(s):
http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices. Quite a lot of known bugs.
Link(s):
mailto:henning@meier-geinitz.de
Manual page: sane-dll
Description: Dynamic loading of shared-library backends.
Link(s):
http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net. Supports IPv4 and IPv6.
- Model:
- Name of the the device.
- Interface:
- How the device is connected to the computer.
- USB id:
- The USB vendor and product ids as printed by sane-find-scanner -q (only applicable for USB devices).
- Status:
- Indicates how many of the features the device provides are supported by SANE.
- unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
- untested means the device may be supported but couldn't be tested. Be very careful and report success/failure.
- minimal means that the device is detected and scans at least in one mode. But the quality is bad or important features won't work.
- basic means it works at least in the most important modes but quality is not perfect.
- good means the device is usable for day-to-day work. Some rather exotic features may be missing.
- complete means the backends supports everything the device can do.
- Comment:
- More information about the backend or model, e.g. the level of support and possible problems.
- Backend:
- Name of the backend, in parentheses if available: Version of backend/driver; newer versions may be available from their home sites.
NEW! means brand-new to the current release of SANE.
UNMAINTAINED means that nobody maintains that backend. Expect no new features or newly supported devices. You are welcome to take over maintainership.- Manual Page:
- A link to the man-page online, if it exists.
- Manufacturer:
- Manufacturer, vendor or brand name of the device.
- Description:
- The scope of application of the backend.