path: root/doc/sane-canon_dr.man

.TH sane\-canon_dr 5 "31 Aug 2015" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane\-canon_dr

.SH NAME
sane\-canon_dr \- SANE backend for Canon DR-series scanners

.SH DESCRIPTION
The
.B sane\-canon_dr
library implements a SANE (Scanner Access Now Easy) backend which
provides access to some Canon DR-series scanners.

This document describes backend version 57, which shipped with SANE 1.0.28.

.SH SUPPORTED HARDWARE
This version has only been tested with a few scanner models. Please see
.I http://www.sane\-project.org/sane\-supported\-devices.html
for the most recent list.

This backend may support other Canon scanners. The best
way to determine level of support is to test the scanner directly,
or to collect a trace of the windows driver in action.
Please contact the author for help or with test results.

In general, the larger machines (DR-4000 and up) which have been tested use
a fairly complete protocol, with hardware support for many modes, resolutions
and features. The smaller machines have many limitations, like missing
horizontal resolutions, missing binary mode, always scanning full-width, etc.
There is code in the backend to address these problems, but there seems to be
no way to detect if they are required, so they must be hard-coded.

.SH OPTIONS
Effort has been made to expose most hardware options, including:
.TP
.B \-\-source Flatbed|ADF Front|ADF Back|ADF Duplex
Selects the source for the scan.

.TP
.B \-\-mode Lineart|Halftone|Gray|Color
Selects the mode for the scan.

.TP
.B \-\-resolution
Controls scan resolution.

.TP
.B \-\-tl\-x, \-\-tl\-y, \-\-br\-x, \-\-br\-y
Sets scan area upper left and lower right coordinates. These are renamed
.BR -t ,
.BR -l ,
.BR -x ,
.B -y
by some frontends.

.TP
.B \-\-page\-width, \-\-page\-height
Sets paper size. Used by scanner to determine centering of scan
coordinates when using ADF and to detect double feed errors.

.PP
Other options will be available based on the capabilities of the scanner:
enhancement, compression, buttons and sensors, etc.
.PP
Additionally, several 'software' options are exposed by the backend. These
are reimplementations of features provided natively by larger scanners, but
running on the host computer. This enables smaller machines to have similar
capabilities. Please note that these features are somewhat simplistic, and
may not perform as well as the native implementations. Note also that these
features all require that the driver cache the entire image in memory. This
will almost certainly result in a reduction of scanning speed.

.TP
.B \-\-swcrop
Requests the driver to detect the extremities of the paper within the larger
image, and crop the empty edges.

.TP
.B \-\-swdeskew
Requests the driver to detect the rotation of the paper within the larger
image, and counter the rotation.

.TP
.B \-\-swdespeck X
Requests the driver to find and remove dots of X diameter or smaller from the
image, and fill the space with the average surrounding color.

Use 'scanimage \-\-help' to get a list, but be aware that some options may
be settable only when another option has been set, and that advanced options
may be hidden by some frontend programs.

.SH CONFIGURATION FILE
The configuration file
.I canon_dr.conf
is used to tell the backend how to look for scanners, and provide options
controlling the operation of the backend. This file is read each time the
frontend asks the backend for a list of scanners, generally only when the
frontend starts. If the configuration file is missing, the backend will
fail to run.
.PP
Scanners can be specified in the configuration file in 4 ways:
.PP
"scsi CANON DR"
.RS
Requests backend to search all scsi buses in the system for a device
which reports itself to be a scanner made by 'CANON', with a model name
starting with 'DR'.
.RE
.PP
"scsi /dev/sg0" (or other scsi device file)
.RS
Requests backend to open the named scsi device. Only useful if you have
multiple compatible scanners connected to your system, and need to
specify one. Probably should not be used with the other "scsi" line above.
.RE
.PP
"usb 0x04a9 0x1603" (or other vendor/product ids)
.RS
Requests backend to search all usb buses in the system for a device
which uses that vendor and product id. The device will then be queried
to determine if it is a Canon scanner.
.RE
.PP
"usb /dev/usb/scanner0" (or other device file)
.RS
Some systems use a kernel driver to access usb scanners. This method is untested.
.RE
.PP
Besides the 'scsi' and 'usb' lines, the configuration file supports the
following 'option' lines:
.PP
"option buffer-size [number of bytes]"
.RS
Set the number of bytes in the data buffer to something other than the
compiled\-in default of 4MB. Large values may cause timeouts or hangs, small
values may cause slow scans.
.PP
Note: The backend does not place an upper bound on this value, as some users
required it to be quite large. Values above the default are not recommended,
and may crash your OS or lockup your scsi card driver. You have been
warned.
.RE
.PP
"option vendor-name [string of text]"
.br
"option model-name [string of text]"
.br
"option version-name [string of text]"
.RS
These options can be used collectively to override the values provided by the
scanner, or to provide the values when the scanner cannot.
.RE
.PP
"option padded-read [0|1]"
.RS
Some scanners prepend all data transmitted to host with 12 bytes. Enable this option if the scanner fails to respond to commands.
.RE
.PP
"option duplex-offset [integer]"
.RS
Some scanners pad the upper edge of one side of a duplex scan. There is some variation in the amount of padding. Modify this option if your unit shows an unwanted band of image data on only one side.
.RE
.PP
.BR NOTE :
'option' lines may appear multiple times in the configuration file.
They only apply to scanners discovered by the next 'scsi/usb' line.
.PP

.SH ENVIRONMENT
The backend uses a single environment variable,
.BR SANE_DEBUG_CANON_DR ,
which enables debugging output to stderr. Valid values are:
.PP
.RS
5  Errors
.br
10 Function trace
.br
15 Function detail
.br
20 Option commands
.br
25 SCSI/USB trace
.br
30 SCSI/USB detail
.br
35 Useless noise
.RE

.SH KNOWN ISSUES
This backend was entirely reverse engineered from usb traces of the proprietary
driver. Various advanced features of the machines may not be enabled. Many
machines have not been tested. Their protocol is unknown.

.SH CREDITS

The various authors of the
.BR sane\-fujitsu (5)
backend provided useful code.
.br
Yabarana Corp.
.I www.yabarana.com
provided significant funding.
.br
EvriChart, Inc.
.I www.evrichart.com
provided funding and loaned equipment.
.br
Canon, USA.
.I www.usa.canon.com
loaned equipment.
.br
HPrint
.I hprint.com.br
provided funding and testing for DR-2510 support.
.br
Stone-IT
.I www.stone-it.com
provided funding for DR-2010 and DR-2050 support.
.br
Gerhard Pfeffer provided access and testing for P-208 and P-215.
.br
Special thanks to: Alejandro Imass, Andre Shimakawa, Martijn van Brummelen, Thanos Diacakis and Junren Shi for testing and feedback.

.SH "SEE ALSO"
.BR sane (7),
.BR sane\-scsi (5),
.BR sane\-usb(5)

.SH AUTHOR
m. allan noah:
.IR "<kitno455 a t gmail d o t com>" .