diff options
Diffstat (limited to 'bin/ae-svn-ci')
| -rwxr-xr-x | bin/ae-svn-ci | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/bin/ae-svn-ci b/bin/ae-svn-ci deleted file mode 100755 index 301d890..0000000 --- a/bin/ae-svn-ci +++ /dev/null @@ -1,240 +0,0 @@ -# -# aegis - project change supervisor -# Copyright (C) 2004 Peter Miller; -# All rights reserved. -# -# As a specific exception to the GPL, you are allowed to copy -# this source file into your own project and modify it, without -# releasing your project under the GPL, unless there is some other -# file or condition which would require it. -# -# MANIFEST: shell script to commit changes to Subversion -# -# This script is expected to be run by the integrate_pass_notify_command -# and as such the baseline has already assumed the shape asked for by -# the change. -# -# integrate_pass_notify_command = -# "$bin/ae-svn-ci $project $change http://svn.site.com/svn/trunk --username svn_user"; -# -# Alternatively, you may wish to tailor this script to the individual -# needs of your project. Make it a source file, e.g. "etc/ae-svn-ci.sh" -# and then use the following: -# -# integrate_pass_notify_command = -# "$sh ${s etc/ae-svn-ci} $project $change http://svn.site.com/svn/trunk --username svn_user"; -# - -USAGE="Usage: $0 [-hnq] <project> <change> <url> [<co_options>]" - -PRINT="echo" -EXECUTE="eval" - -while getopts "hnq" FLAG -do - case ${FLAG} in - h ) - echo "${USAGE}" - exit 0 - ;; - n ) - EXECUTE=":" - ;; - q ) - PRINT=":" - ;; - * ) - echo "$0: unknown option ${FLAG}" >&2 - exit 1 - ;; - esac -done - -shift `expr ${OPTIND} - 1` - -case $# in -[012]) - echo "${USAGE}" 1>&2 - exit 1 - ;; -*) - project=$1 - change=$2 - svn_url=$3 - shift 3 - svn_co_flags=$* - ;; -esac - -here=`pwd` - -AEGIS_PROJECT=$project -export AEGIS_PROJECT -AEGIS_CHANGE=$change -export AEGIS_CHANGE - -module=`echo $project | sed 's|[.].*||'` - -baseline=`aegis -cd -bl` - -if test X${TMPDIR} = X; then TMPDIR=/var/tmp; fi - -TMP=${TMPDIR}/ae-svn-ci.$$ -mkdir ${TMP} -cd ${TMP} - -PWD=`pwd` -if test X${PWD} != X${TMP}; then - echo "$0: ended up in ${PWD}, not ${TMP}" >&2 - exit 1 -fi - -fail() -{ - set +x - cd $here - rm -rf ${TMP} - echo "FAILED" 1>&2 - exit 1 -} -trap "fail" 1 2 3 15 - -Command() -{ - ${PRINT} "$*" - ${EXECUTE} "$*" -} - -# -# Create a new Subversion work area. -# -# Note: this assumes the module is checked-out into a directory of the -# same name. Is there a way to ask Subversion where it is going to put a -# module, so we can always get the "cd" right? -# -${PRINT} svn co $svn_url $module $svn_co_flags -${EXECUTE} svn co $svn_url $module $svn_co_flags > LOG 2>&1 -if test $? -ne 0; then cat LOG; fail; fi -${EXECUTE} cd $module - -# -# Now we need to extract the sources from Aegis and drop them into the -# Subversion work area. There are two ways to do this. -# -# The first way is to use the generated tarball. -# This has the advantage that it has the Makefile.in file in it, and -# will work immediately. -# -# The second way is to use aetar, which will give exact sources, and -# omit all derived files. This will *not* include the Makefile.in, -# and so will not be readily compilable. -# -# gunzip < $baseline/export/${project}.tar.gz | tardy -rp ${project} | tar xf - -aetar -send -comp-alg=gzip -o - | tar xzf - - -# -# If any new directories have been created we will need to add them -# to Subversion before we can add the new files which we know are in them, -# or they would not have been created. Do this only if the -n option -# isn't used, because if it is, we won't have actually checked out the -# source and we'd erroneously report that all of them need to be added. -# -if test "X${EXECUTE}" != "X:" -then - find . -name .svn -prune -o -type d -print | - xargs --max-args=1 | - while read dir - do - if [ ! -d "$dir/.svn" ] - then - Command svn add -N "$dir" - fi - done -fi - -# -# Use the Aegis meta-data to perform some commands that Subversion can't -# figure out for itself. We use an inline "aer" report script to identify -# when a remove-create pair are actually due to a move. -# -aegis -rpt -nph -f - <<_EOF_ | -auto cs; -cs = project[project_name()].state.branch.change[change_number()]; - -columns({width = 1000;}); - -auto file, moved; -for (file in cs.src) -{ - if (file.move != "") - moved[file.move] = 1; -} - -auto action; -for (file in cs.src) -{ - if (file.action == "remove" && file.move != "") - action = "move"; - else - action = file.action; - /* - * Suppress printing of any files created as the result of a move. - * These are printed as the destination when printing the line for - * the file that was *removed* as a result of the move. - */ - if (action != "create" || ! moved[file.file_name]) - print(sprintf("%s %s \\"%s\\" \\"%s\\"", file.usage, action, file.file_name, file.move)); -} -_EOF_ -while read line -do - eval set -- "$line" - usage="$1" - action="$2" - srcfile="$3" - dstfile="$4" - case $action in - create) - Command svn add $srcfile - ;; - remove) - Command rm -f $srcfile - Command svn remove $srcfile - ;; - move) - Command mv $dstfile $dstfile.move - Command svn move $srcfile $dstfile - Command cp $dstfile.move $dstfile - Command rm -f $dstfile.move - ;; - *) - ;; - esac -done - -# -# Extract the brief description. We'd like to do this using aesub -# or something, like so: -# -# message=`aesub '${version} - ${change description}'` -# -# but the expansion of ${change description} has a lame hard-coded max of -# 80 characters, so we have to do this by hand. (This has the slight -# benefit of preserving backslashes in front of any double-quotes in -# the text; that will have to be handled if we go back to using aesub.) -# -description=`aegis -ca -l | sed -n 's/brief_description = "\(.*\)";$/\1/p'` -version=`aesub '${version}'` -message="$version - $description" - -# -# Now commit all the changes. -# -Command svn commit -m \"$message\" - -# -# All done. Clean up and go home. -# -cd $here -rm -rf ${TMP} -exit 0 |