diff options
Diffstat (limited to 'doc/user/sconf.in')
| -rw-r--r-- | doc/user/sconf.in | 486 |
1 files changed, 486 insertions, 0 deletions
diff --git a/doc/user/sconf.in b/doc/user/sconf.in new file mode 100644 index 0000000..c4092c9 --- /dev/null +++ b/doc/user/sconf.in @@ -0,0 +1,486 @@ +<!-- + + Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The SCons Foundation + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY + KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE + WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +--> + + <para> + + &SCons; has integrated support for multi-platform build configuration + similar to that offered by GNU &Autoconf;, + such as + figuring out what libraries or header files + are available on the local system. + This section describes how to use + this &SCons feature. + + </para> + + <note> + <para> + This chapter is still under development, + so not everything is explained as well as it should be. + See the &SCons; man page for additional information. + </para> + </note> + + <section> + <title>&Configure_Contexts;</title> + + <para> + + The basic framework for multi-platform build configuration + in &SCons; is to attach a &configure_context; to a + construction environment by calling the &Configure; function, + perform a number of checks for + libraries, functions, header files, etc., + and to then call the configure context's &Finish; method + to finish off the configuration: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + # Checks for libraries, header files, etc. go here! + env = conf.Finish() + </sconstruct> + + <para> + + &SCons; provides a number of basic checks, + as well as a mechanism for adding your own custom checks. + + </para> + + <para> + + Note that &SCons; uses its own dependency + mechanism to determine when a check + needs to be run--that is, + &SCons; does not run the checks + every time it is invoked, + but caches the values returned by previous checks + and uses the cached values unless something has changed. + This saves a tremendous amount + of developer time while working on + cross-platform build issues. + + </para> + + <para> + + The next sections describe + the basic checks that &SCons; supports, + as well as how to add your own custom checks. + + </para> + + </section> + + <section> + <title>Checking for the Existence of Header Files</title> + + <para> + + Testing the existence of a header file + requires knowing what language the header file is. + A configure context has a &CheckCHeader; method + that checks for the existence of a C header file: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckCHeader('math.h'): + print 'Math.h must be installed!' + Exit(1) + if conf.CheckCHeader('foo.h'): + conf.env.Append('-DHAS_FOO_H') + env = conf.Finish() + </sconstruct> + + <para> + + Note that you can choose to terminate + the build if a given header file doesn't exist, + or you can modify the construction environment + based on the existence of a header file. + + </para> + + <para> + + If you need to check for the existence + a C++ header file, + use the &CheckCXXHeader; method: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckCXXHeader('vector.h'): + print 'vector.h must be installed!' + Exit(1) + env = conf.Finish() + </sconstruct> + + </section> + + <section> + <title>Checking for the Availability of a Function</title> + + <para> + + Check for the availability of a specific function + using the &CheckFunc; method: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckFunc('strcpy'): + print 'Did not find strcpy(), using local version' + conf.env.Append(CPPDEFINES = '-Dstrcpy=my_local_strcpy') + env = conf.Finish() + </sconstruct> + + </section> + + <section> + <title>Checking for the Availability of a Library</title> + + <para> + + Check for the availability of a library + using the &CheckLib; method. + You only specify the basename of the library, + you don't need to add a <literal>lib</literal> + prefix or a <literal>.a</literal> or <literal>.lib</literal> suffix: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckLib('m'): + print 'Did not find libm.a or m.lib, exiting!' + Exit(1) + env = conf.Finish() + </sconstruct> + + <para> + + Because the ability to use a library successfully + often depends on having access to a header file + that describes the library's interface, + you can check for a library + <emphasis>and</emphasis> a header file + at the same time by using the + &CheckLibWithHeader; method: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckLibWithHeader('m', 'math.h', 'c'): + print 'Did not find libm.a or m.lib, exiting!' + Exit(1) + env = conf.Finish() + </sconstruct> + + <para> + + This is essentially shorthand for + separate calls to the &CheckHeader; and &CheckLib; + functions. + + </para> + + </section> + + <section> + <title>Checking for the Availability of a &typedef;</title> + + <para> + + Check for the availability of a &typedef; + by using the &CheckType; method: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckType('off_t'): + print 'Did not find off_t typedef, assuming int' + conf.env.Append(CCFLAGS = '-Doff_t=int') + env = conf.Finish() + </sconstruct> + + <para> + + You can also add a string that will be + placed at the beginning of the test file + that will be used to check for the &typedef;. + This provide a way to specify + files that must be included to find the &typedef;: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env) + if not conf.CheckType('off_t', '#include &lt;sys/types.h&gt;\n'): + print 'Did not find off_t typedef, assuming int' + conf.env.Append(CCFLAGS = '-Doff_t=int') + env = conf.Finish() + </sconstruct> + + </section> + + <section> + <title>Adding Your Own Custom Checks</title> + + <para> + + A custom check is a Python function + that checks for a certain condition to exist + on the running system, + usually using methods that &SCons; + supplies to take care of the details + of checking whether a compilation succeeds, + a link succeeds, + a program is runnable, + etc. + A simple custom check for the existence of + a specific library might look as follows: + + </para> + + <sconstruct> + mylib_test_source_file = """ + #include &lt;mylib.h&gt; + int main(int argc, char **argv) + { + MyLibrary mylib(argc, argv); + return 0; + } + """ + + def CheckMyLibrary(context): + context.Message('Checking for MyLibrary...') + result = context.TryLink(mylib_test_source_file, '.c') + context.Result(result) + return result + </sconstruct> + + <para> + + The &Message; and &Result; methods + should typically begin and end a custom check to + let the user know what's going on: + the &Message; call prints the + specified message (with no trailing newline) + and the &Result; call prints + <literal>yes</literal> if the check succeeds and + <literal>no</literal> if it doesn't. + The &TryLink; method + actually tests for whether the + specified program text + will successfully link. + + </para> + + <para> + + (Note that a custom check can modify + its check based on any arguments you + choose to pass it, + or by using or modifying the configure context environment + in the <literal>context.env</literal> attribute.) + + </para> + + <para> + + This custom check function is + then attached to the &configure_context; + by passing a dictionary + to the &Configure; call + that maps a name of the check + to the underlying function: + + </para> + + <sconstruct> + env = Environment() + conf = Configure(env, custom_tests = {'CheckMyLibrary' : CheckMyLibrary}) + </sconstruct> + + <para> + + You'll typically want to make + the check and the function name the same, + as we've done here, + to avoid potential confusion. + + </para> + + <para> + + We can then put these pieces together + and actually call the <literal>CheckMyLibrary</literal> check + as follows: + + </para> + + <sconstruct> + mylib_test_source_file = """ + #include &lt;mylib.h&gt; + int main(int argc, char **argv) + { + MyLibrary mylib(argc, argv); + return 0; + } + """ + + def CheckMyLibrary(context): + context.Message('Checking for MyLibrary... ') + result = context.TryLink(mylib_test_source_file, '.c') + context.Result(result) + return result + + env = Environment() + conf = Configure(env, custom_tests = {'CheckMyLibrary' : CheckMyLibrary}) + if not conf.CheckMyLibrary(): + print 'MyLibrary is not installed!' + Exit(1) + env = conf.Finish() + + # We would then add actual calls like Program() to build + # something using the "env" construction environment. + </sconstruct> + + <para> + + If MyLibrary is not installed on the system, + the output will look like: + + </para> + + <screen> + % <userinput>scons</userinput> + scons: Reading SConscript file ... + Checking for MyLibrary... failed + MyLibrary is not installed! + </screen> + + <para> + + If MyLibrary is installed, + the output will look like: + + </para> + + <screen> + % <userinput>scons</userinput> + scons: Reading SConscript file ... + Checking for MyLibrary... failed + scons: done reading SConscript + scons: Building targets ... + . + . + . + </screen> + + </section> + + <section> + <title>Not Configuring When Cleaning Targets</title> + + <para> + + Using multi-platform configuration + as described in the previous sections + will run the configuration commands + even when invoking + <userinput>scons -c</userinput> + to clean targets: + + </para> + + <screen> + % <userinput>scons -Q -c</userinput> + Checking for MyLibrary... yes + Removed foo.o + Removed foo + </screen> + + <para> + + Although running the platform checks + when removing targets doesn't hurt anything, + it's usually unnecessary. + You can avoid this by using the + &GetOption(); method to + check whether the <option>-c</option> (clean) + option has been invoked on the command line: + + </para> + + <sconstruct> + env = Environment() + if not env.GetOption('clean'): + conf = Configure(env, custom_tests = {'CheckMyLibrary' : CheckMyLibrary}) + if not conf.CheckMyLibrary(): + print 'MyLibrary is not installed!' + Exit(1) + env = conf.Finish() + </sconstruct> + + <screen> + % <userinput>scons -Q -c</userinput> + Removed foo.o + Removed foo + </screen> + + </section> + + <!-- + + <section> + <title>Controlling Configuration: the &config; Option</title> + + <para> + + XXX -D, -u and -U + + </para> + + </section> + + --> |